/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sc.hxx" #include #include #include #include #include #include #include #include #include #include // INCLUDE --------------------------------------------------------------- #include "scitems.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "drwlayer.hxx" #include "drawpage.hxx" #include "global.hxx" #include "document.hxx" #include "rechead.hxx" #include "userdat.hxx" #include "markdata.hxx" #include "globstr.hrc" #include "scmod.hxx" #include "chartarr.hxx" #include "postit.hxx" #include "attrib.hxx" #include "charthelper.hxx" #define DET_ARROW_OFFSET 1000 // Abstand zur naechsten Zelle beim Loeschen (bShrink), damit der Anker // immer an der richtigen Zelle angezeigt wird //#define SHRINK_DIST 3 // und noch etwas mehr, damit das Objekt auch sichtbar in der Zelle liegt #define SHRINK_DIST 25 #define SHRINK_DIST_TWIPS 15 using namespace ::com::sun::star; // STATIC DATA ----------------------------------------------------------- TYPEINIT1(ScTabDeletedHint, SfxHint); TYPEINIT1(ScTabSizeChangedHint, SfxHint); static ScDrawObjFactory* pFac = NULL; static E3dObjFactory* pF3d = NULL; static sal_uInt16 nInst = 0; SfxObjectShell* ScDrawLayer::pGlobalDrawPersist = NULL; //REMOVE SvPersist* ScDrawLayer::pGlobalDrawPersist = NULL; sal_Bool bDrawIsInUndo = sal_False; //! Member // ----------------------------------------------------------------------- ScUndoObjData::ScUndoObjData( SdrObject* pObjP, const ScAddress& rOS, const ScAddress& rOE, const ScAddress& rNS, const ScAddress& rNE ) : SdrUndoObj( *pObjP ), aOldStt( rOS ), aOldEnd( rOE ), aNewStt( rNS ), aNewEnd( rNE ) { } __EXPORT ScUndoObjData::~ScUndoObjData() { } void ScUndoObjData::Undo() { ScDrawObjData* pData = ScDrawLayer::GetObjData( pObj ); DBG_ASSERT(pData,"ScUndoObjData: Daten nicht da"); if (pData) { pData->maStart = aOldStt; pData->maEnd = aOldEnd; } } void __EXPORT ScUndoObjData::Redo() { ScDrawObjData* pData = ScDrawLayer::GetObjData( pObj ); DBG_ASSERT(pData,"ScUndoObjData: Daten nicht da"); if (pData) { pData->maStart = aNewStt; pData->maEnd = aNewEnd; } } // ----------------------------------------------------------------------- ScTabDeletedHint::ScTabDeletedHint( SCTAB nTabNo ) : nTab( nTabNo ) { } __EXPORT ScTabDeletedHint::~ScTabDeletedHint() { } ScTabSizeChangedHint::ScTabSizeChangedHint( SCTAB nTabNo ) : nTab( nTabNo ) { } __EXPORT ScTabSizeChangedHint::~ScTabSizeChangedHint() { } // ----------------------------------------------------------------------- #define MAXMM 10000000 inline void TwipsToMM( long& nVal ) { nVal = (long) ( nVal * HMM_PER_TWIPS ); } inline void ReverseTwipsToMM( long& nVal ) { // reverse the effect of TwipsToMM - round up here (add 1) nVal = ((long) ( nVal / HMM_PER_TWIPS )) + 1; } void lcl_TwipsToMM( Point& rPoint ) { TwipsToMM( rPoint.X() ); TwipsToMM( rPoint.Y() ); } void lcl_ReverseTwipsToMM( Point& rPoint ) { ReverseTwipsToMM( rPoint.X() ); ReverseTwipsToMM( rPoint.Y() ); } void lcl_ReverseTwipsToMM( Rectangle& rRect ) { ReverseTwipsToMM( rRect.Left() ); ReverseTwipsToMM( rRect.Right() ); ReverseTwipsToMM( rRect.Top() ); ReverseTwipsToMM( rRect.Bottom() ); } // ----------------------------------------------------------------------- ScDrawLayer::ScDrawLayer( ScDocument* pDocument, const String& rName ) : FmFormModel( SvtPathOptions().GetPalettePath(), NULL, // SfxItemPool* Pool pGlobalDrawPersist ? pGlobalDrawPersist : ( pDocument ? pDocument->GetDocumentShell() : NULL ), sal_True ), // bUseExtColorTable (is set below) aName( rName ), pDoc( pDocument ), pUndoGroup( NULL ), bRecording( sal_False ), bAdjustEnabled( sal_True ), bHyphenatorSet( sal_False ), mbUndoAllowed( sal_True ) { pGlobalDrawPersist = NULL; // nur einmal benutzen SfxObjectShell* pObjSh = pDocument ? pDocument->GetDocumentShell() : NULL; if ( pObjSh ) { SetObjectShell( pObjSh ); // set color table SvxColorTableItem* pColItem = (SvxColorTableItem*) pObjSh->GetItem( SID_COLOR_TABLE ); XColorTable* pXCol = pColItem ? pColItem->GetColorTable() : XColorTable::GetStdColorTable(); SetColorTable( pXCol ); } else SetColorTable( XColorTable::GetStdColorTable() ); SetSwapGraphics(sal_True); // SetSwapAsynchron(sal_True); // an der View SetScaleUnit(MAP_100TH_MM); SfxItemPool& rPool = GetItemPool(); rPool.SetDefaultMetric(SFX_MAPUNIT_100TH_MM); SvxFrameDirectionItem aModeItem( FRMDIR_ENVIRONMENT, EE_PARA_WRITINGDIR ); rPool.SetPoolDefaultItem( aModeItem ); // #i33700# // Set shadow distance defaults as PoolDefaultItems. Details see bug. rPool.SetPoolDefaultItem(SdrShadowXDistItem(300)); rPool.SetPoolDefaultItem(SdrShadowYDistItem(300)); // #111216# default for script spacing depends on locale, see SdDrawDocument ctor in sd LanguageType eOfficeLanguage = Application::GetSettings().GetLanguage(); if ( eOfficeLanguage == LANGUAGE_KOREAN || eOfficeLanguage == LANGUAGE_KOREAN_JOHAB || eOfficeLanguage == LANGUAGE_JAPANESE ) { // secondary is edit engine pool rPool.GetSecondaryPool()->SetPoolDefaultItem( SvxScriptSpaceItem( sal_False, EE_PARA_ASIANCJKSPACING ) ); } rPool.FreezeIdRanges(); // the pool is also used directly SdrLayerAdmin& rAdmin = GetLayerAdmin(); rAdmin.NewLayer(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("vorne")), SC_LAYER_FRONT); rAdmin.NewLayer(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("hinten")), SC_LAYER_BACK); rAdmin.NewLayer(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("intern")), SC_LAYER_INTERN); rAdmin.NewLayer(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("Controls")), SC_LAYER_CONTROLS); rAdmin.NewLayer(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("hidden")), SC_LAYER_HIDDEN); // "Controls" is new - must also be created when loading // Link fuer URL-Fields setzen ScModule* pScMod = SC_MOD(); Outliner& rOutliner = GetDrawOutliner(); rOutliner.SetCalcFieldValueHdl( LINK( pScMod, ScModule, CalcFieldValueHdl ) ); Outliner& rHitOutliner = GetHitTestOutliner(); rHitOutliner.SetCalcFieldValueHdl( LINK( pScMod, ScModule, CalcFieldValueHdl ) ); // #95129# SJ: set FontHeight pool defaults without changing static SdrEngineDefaults SfxItemPool* pOutlinerPool = rOutliner.GetEditTextObjectPool(); if ( pOutlinerPool ) pItemPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT )); // 12Pt SfxItemPool* pHitOutlinerPool = rHitOutliner.GetEditTextObjectPool(); if ( pHitOutlinerPool ) pHitOutlinerPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT )); // 12Pt // initial undo mode as in Calc document if( pDoc ) EnableUndo( pDoc->IsUndoEnabled() ); // URL-Buttons haben keinen Handler mehr, machen alles selber if( !nInst++ ) { pFac = new ScDrawObjFactory; pF3d = new E3dObjFactory; } } __EXPORT ScDrawLayer::~ScDrawLayer() { Broadcast(SdrHint(HINT_MODELCLEARED)); // #116168# //Clear(); ClearModel(sal_True); delete pUndoGroup; if( !--nInst ) { delete pFac, pFac = NULL; delete pF3d, pF3d = NULL; } } void ScDrawLayer::UseHyphenator() { if (!bHyphenatorSet) { com::sun::star::uno::Reference< com::sun::star::linguistic2::XHyphenator > xHyphenator = LinguMgr::GetHyphenator(); GetDrawOutliner().SetHyphenator( xHyphenator ); GetHitTestOutliner().SetHyphenator( xHyphenator ); bHyphenatorSet = sal_True; } } SdrPage* __EXPORT ScDrawLayer::AllocPage(FASTBOOL bMasterPage) { // don't create basic until it is needed StarBASIC* pBasic = NULL; ScDrawPage* pPage = new ScDrawPage( *this, pBasic, sal::static_int_cast(bMasterPage) ); return pPage; } sal_Bool ScDrawLayer::HasObjects() const { sal_Bool bFound = sal_False; sal_uInt16 nCount = GetPageCount(); for (sal_uInt16 i=0; iGetObjCount()) bFound = sal_True; return bFound; } void ScDrawLayer::UpdateBasic() { // don't create basic until it is needed //! remove this method? } SdrModel* __EXPORT ScDrawLayer::AllocModel() const { // #103849# Allocated model (for clipboard etc) must not have a pointer // to the original model's document, pass NULL as document: return new ScDrawLayer( NULL, aName ); } Window* __EXPORT ScDrawLayer::GetCurDocViewWin() { DBG_ASSERT( pDoc, "ScDrawLayer::GetCurDocViewWin without document" ); if ( !pDoc ) return NULL; SfxViewShell* pViewSh = SfxViewShell::Current(); SfxObjectShell* pObjSh = pDoc->GetDocumentShell(); if (pViewSh && pViewSh->GetObjectShell() == pObjSh) return pViewSh->GetWindow(); return NULL; } sal_Bool ScDrawLayer::ScAddPage( SCTAB nTab ) { if (bDrawIsInUndo) return sal_False; // not inserted ScDrawPage* pPage = (ScDrawPage*)AllocPage( sal_False ); InsertPage(pPage, static_cast(nTab)); if (bRecording) AddCalcUndo< SdrUndoNewPage >(*pPage); return sal_True; // inserted } void ScDrawLayer::ScRemovePage( SCTAB nTab ) { if (bDrawIsInUndo) return; Broadcast( ScTabDeletedHint( nTab ) ); if (bRecording) { SdrPage* pPage = GetPage(static_cast(nTab)); AddCalcUndo< SdrUndoDelPage >(*pPage); // Undo-Action wird Owner der Page RemovePage( static_cast(nTab) ); // nur austragen, nicht loeschen } else DeletePage( static_cast(nTab) ); // einfach weg damit } void ScDrawLayer::ScRenamePage( SCTAB nTab, const String& rNewName ) { ScDrawPage* pPage = (ScDrawPage*) GetPage(static_cast(nTab)); if (pPage) pPage->SetName(rNewName); } void ScDrawLayer::ScMovePage( sal_uInt16 nOldPos, sal_uInt16 nNewPos ) { MovePage( nOldPos, nNewPos ); } void ScDrawLayer::ScCopyPage( sal_uInt16 nOldPos, sal_uInt16 nNewPos, sal_Bool bAlloc ) { //! remove argument bAlloc (always sal_False) if (bDrawIsInUndo) return; SdrPage* pOldPage = GetPage(nOldPos); SdrPage* pNewPage = bAlloc ? AllocPage(sal_False) : GetPage(nNewPos); // kopieren if (pOldPage && pNewPage) { SdrObjListIter aIter( *pOldPage, IM_FLAT ); SdrObject* pOldObject = aIter.Next(); while (pOldObject) { // #i112034# do not copy internal objects (detective) and note captions if ( pOldObject->GetLayer() != SC_LAYER_INTERN && !IsNoteCaption( pOldObject ) ) { // #116235# SdrObject* pNewObject = pOldObject->Clone(); //SdrObject* pNewObject = pOldObject->Clone( pNewPage, this ); pNewObject->SetModel(this); pNewObject->SetPage(pNewPage); pNewObject->NbcMove(Size(0,0)); pNewPage->InsertObject( pNewObject ); if (bRecording) AddCalcUndo< SdrUndoInsertObj >( *pNewObject ); } pOldObject = aIter.Next(); } } if (bAlloc) InsertPage(pNewPage, nNewPos); } inline sal_Bool IsInBlock( const ScAddress& rPos, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2 ) { return rPos.Col() >= nCol1 && rPos.Col() <= nCol2 && rPos.Row() >= nRow1 && rPos.Row() <= nRow2; } void ScDrawLayer::MoveCells( SCTAB nTab, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2, SCsCOL nDx,SCsROW nDy, bool bUpdateNoteCaptionPos ) { SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page nicht gefunden"); if (!pPage) return; sal_Bool bNegativePage = pDoc && pDoc->IsNegativePage( nTab ); sal_uLong nCount = pPage->GetObjCount(); for ( sal_uLong i = 0; i < nCount; i++ ) { SdrObject* pObj = pPage->GetObj( i ); ScDrawObjData* pData = GetObjDataTab( pObj, nTab ); if( pData ) { const ScAddress aOldStt = pData->maStart; const ScAddress aOldEnd = pData->maEnd; sal_Bool bChange = sal_False; if ( aOldStt.IsValid() && IsInBlock( aOldStt, nCol1,nRow1, nCol2,nRow2 ) ) { pData->maStart.IncCol( nDx ); pData->maStart.IncRow( nDy ); bChange = sal_True; } if ( aOldEnd.IsValid() && IsInBlock( aOldEnd, nCol1,nRow1, nCol2,nRow2 ) ) { pData->maEnd.IncCol( nDx ); pData->maEnd.IncRow( nDy ); bChange = sal_True; } if (bChange) { if ( pObj->ISA( SdrRectObj ) && pData->maStart.IsValid() && pData->maEnd.IsValid() ) pData->maStart.PutInOrder( pData->maEnd ); AddCalcUndo< ScUndoObjData >( pObj, aOldStt, aOldEnd, pData->maStart, pData->maEnd ); RecalcPos( pObj, *pData, bNegativePage, bUpdateNoteCaptionPos ); } } } } void ScDrawLayer::SetPageSize( sal_uInt16 nPageNo, const Size& rSize, bool bUpdateNoteCaptionPos ) { SdrPage* pPage = GetPage(nPageNo); if (pPage) { if ( rSize != pPage->GetSize() ) { pPage->SetSize( rSize ); Broadcast( ScTabSizeChangedHint( static_cast(nPageNo) ) ); // SetWorkArea() an den Views } // Detektivlinien umsetzen (an neue Hoehen/Breiten anpassen) // auch wenn Groesse gleich geblieben ist // (einzelne Zeilen/Spalten koennen geaendert sein) sal_Bool bNegativePage = pDoc && pDoc->IsNegativePage( static_cast(nPageNo) ); sal_uLong nCount = pPage->GetObjCount(); for ( sal_uLong i = 0; i < nCount; i++ ) { SdrObject* pObj = pPage->GetObj( i ); ScDrawObjData* pData = GetObjDataTab( pObj, static_cast(nPageNo) ); if( pData ) RecalcPos( pObj, *pData, bNegativePage, bUpdateNoteCaptionPos ); } } } void ScDrawLayer::RecalcPos( SdrObject* pObj, const ScDrawObjData& rData, bool bNegativePage, bool bUpdateNoteCaptionPos ) { DBG_ASSERT( pDoc, "ScDrawLayer::RecalcPos - missing document" ); if( !pDoc ) return; if( rData.mbNote ) { DBG_ASSERT( rData.maStart.IsValid(), "ScDrawLayer::RecalcPos - invalid position for cell note" ); /* #i109372# On insert/remove rows/columns/cells: Updating the caption position must not be done, if the cell containing the note has not been moved yet in the document. The calling code now passes an additional boolean stating if the cells are already moved. */ if( bUpdateNoteCaptionPos ) /* When inside an undo action, there may be pending note captions where cell note is already deleted (thus document cannot find the note object anymore). The caption will be deleted later with drawing undo. */ if( ScPostIt* pNote = pDoc->GetNote( rData.maStart ) ) pNote->UpdateCaptionPos( rData.maStart ); return; } bool bValid1 = rData.maStart.IsValid(); SCCOL nCol1 = rData.maStart.Col(); SCROW nRow1 = rData.maStart.Row(); SCTAB nTab1 = rData.maStart.Tab(); bool bValid2 = rData.maEnd.IsValid(); SCCOL nCol2 = rData.maEnd.Col(); SCROW nRow2 = rData.maEnd.Row(); SCTAB nTab2 = rData.maEnd.Tab(); // validation circle bool bCircle = pObj->ISA( SdrCircObj ); // detective arrow bool bArrow = pObj->IsPolyObj() && (pObj->GetPointCount() == 2); if( bCircle ) { Point aPos( pDoc->GetColOffset( nCol1, nTab1 ), pDoc->GetRowOffset( nRow1, nTab1 ) ); TwipsToMM( aPos.X() ); TwipsToMM( aPos.Y() ); // Berechnung und Werte wie in detfunc.cxx Size aSize( (long)(pDoc->GetColWidth( nCol1, nTab1 ) * HMM_PER_TWIPS), (long)(pDoc->GetRowHeight( nRow1, nTab1 ) * HMM_PER_TWIPS) ); Rectangle aRect( aPos, aSize ); aRect.Left() -= 250; aRect.Right() += 250; aRect.Top() -= 70; aRect.Bottom() += 70; if ( bNegativePage ) MirrorRectRTL( aRect ); if ( pObj->GetLogicRect() != aRect ) { if (bRecording) AddCalcUndo( *pObj ); pObj->SetLogicRect(aRect); } } else if( bArrow ) { //! nicht mehrere Undos fuer ein Objekt erzeugen (hinteres kann dann weggelassen werden) SCCOL nLastCol; SCROW nLastRow; if( bValid1 ) { Point aPos( pDoc->GetColOffset( nCol1, nTab1 ), pDoc->GetRowOffset( nRow1, nTab1 ) ); if (!pDoc->ColHidden(nCol1, nTab1, nLastCol)) aPos.X() += pDoc->GetColWidth( nCol1, nTab1 ) / 4; if (!pDoc->RowHidden(nRow1, nTab1, nLastRow)) aPos.Y() += pDoc->GetRowHeight( nRow1, nTab1 ) / 2; TwipsToMM( aPos.X() ); TwipsToMM( aPos.Y() ); Point aStartPos = aPos; if ( bNegativePage ) aStartPos.X() = -aStartPos.X(); // don't modify aPos - used below if ( pObj->GetPoint( 0 ) != aStartPos ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj> ( *pObj ); pObj->SetPoint( aStartPos, 0 ); } if( !bValid2 ) { Point aEndPos( aPos.X() + DET_ARROW_OFFSET, aPos.Y() - DET_ARROW_OFFSET ); if (aEndPos.Y() < 0) aEndPos.Y() += (2 * DET_ARROW_OFFSET); if ( bNegativePage ) aEndPos.X() = -aEndPos.X(); if ( pObj->GetPoint( 1 ) != aEndPos ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj >( *pObj ); pObj->SetPoint( aEndPos, 1 ); } } } if( bValid2 ) { Point aPos( pDoc->GetColOffset( nCol2, nTab2 ), pDoc->GetRowOffset( nRow2, nTab2 ) ); if (!pDoc->ColHidden(nCol2, nTab2, nLastCol)) aPos.X() += pDoc->GetColWidth( nCol2, nTab2 ) / 4; if (!pDoc->RowHidden(nRow2, nTab2, nLastRow)) aPos.Y() += pDoc->GetRowHeight( nRow2, nTab2 ) / 2; TwipsToMM( aPos.X() ); TwipsToMM( aPos.Y() ); Point aEndPos = aPos; if ( bNegativePage ) aEndPos.X() = -aEndPos.X(); // don't modify aPos - used below if ( pObj->GetPoint( 1 ) != aEndPos ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj> ( *pObj ); pObj->SetPoint( aEndPos, 1 ); } if( !bValid1 ) { Point aStartPos( aPos.X() - DET_ARROW_OFFSET, aPos.Y() - DET_ARROW_OFFSET ); if (aStartPos.X() < 0) aStartPos.X() += (2 * DET_ARROW_OFFSET); if (aStartPos.Y() < 0) aStartPos.Y() += (2 * DET_ARROW_OFFSET); if ( bNegativePage ) aStartPos.X() = -aStartPos.X(); if ( pObj->GetPoint( 0 ) != aStartPos ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj >( *pObj ); pObj->SetPoint( aStartPos, 0 ); } } } } else // Referenz-Rahmen { DBG_ASSERT( bValid1, "ScDrawLayer::RecalcPos - invalid start position" ); Point aPos( pDoc->GetColOffset( nCol1, nTab1 ), pDoc->GetRowOffset( nRow1, nTab1 ) ); TwipsToMM( aPos.X() ); TwipsToMM( aPos.Y() ); if( bValid2 ) { Point aEnd( pDoc->GetColOffset( nCol2 + 1, nTab2 ), pDoc->GetRowOffset( nRow2 + 1, nTab2 ) ); TwipsToMM( aEnd.X() ); TwipsToMM( aEnd.Y() ); Rectangle aNew( aPos, aEnd ); if ( bNegativePage ) MirrorRectRTL( aNew ); if ( pObj->GetLogicRect() != aNew ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj >( *pObj ); pObj->SetLogicRect(aNew); } } else { if ( bNegativePage ) aPos.X() = -aPos.X(); if ( pObj->GetRelativePos() != aPos ) { if (bRecording) AddCalcUndo< SdrUndoGeoObj >( *pObj ); pObj->SetRelativePos( aPos ); } } } } sal_Bool ScDrawLayer::GetPrintArea( ScRange& rRange, sal_Bool bSetHor, sal_Bool bSetVer ) const { DBG_ASSERT( pDoc, "ScDrawLayer::GetPrintArea without document" ); if ( !pDoc ) return sal_False; SCTAB nTab = rRange.aStart.Tab(); DBG_ASSERT( rRange.aEnd.Tab() == nTab, "GetPrintArea: Tab unterschiedlich" ); sal_Bool bNegativePage = pDoc->IsNegativePage( nTab ); sal_Bool bAny = sal_False; long nEndX = 0; long nEndY = 0; long nStartX = LONG_MAX; long nStartY = LONG_MAX; // Grenzen ausrechnen if (!bSetHor) { nStartX = 0; SCCOL nStartCol = rRange.aStart.Col(); SCCOL i; for (i=0; iGetColWidth(i,nTab); nEndX = nStartX; SCCOL nEndCol = rRange.aEnd.Col(); for (i=nStartCol; i<=nEndCol; i++) nEndX += pDoc->GetColWidth(i,nTab); nStartX = (long)(nStartX * HMM_PER_TWIPS); nEndX = (long)(nEndX * HMM_PER_TWIPS); } if (!bSetVer) { nStartY = pDoc->GetRowHeight( 0, rRange.aStart.Row()-1, nTab); nEndY = nStartY + pDoc->GetRowHeight( rRange.aStart.Row(), rRange.aEnd.Row(), nTab); nStartY = (long)(nStartY * HMM_PER_TWIPS); nEndY = (long)(nEndY * HMM_PER_TWIPS); } if ( bNegativePage ) { nStartX = -nStartX; // positions are negative, swap start/end so the same comparisons work nEndX = -nEndX; ::std::swap( nStartX, nEndX ); } const SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page nicht gefunden"); if (pPage) { SdrObjListIter aIter( *pPage, IM_FLAT ); SdrObject* pObject = aIter.Next(); while (pObject) { //! Flags (ausgeblendet?) testen Rectangle aObjRect = pObject->GetCurrentBoundRect(); sal_Bool bFit = sal_True; if ( !bSetHor && ( aObjRect.Right() < nStartX || aObjRect.Left() > nEndX ) ) bFit = sal_False; if ( !bSetVer && ( aObjRect.Bottom() < nStartY || aObjRect.Top() > nEndY ) ) bFit = sal_False; // #i104716# don't include hidden note objects if ( bFit && pObject->GetLayer() != SC_LAYER_HIDDEN ) { if (bSetHor) { if (aObjRect.Left() < nStartX) nStartX = aObjRect.Left(); if (aObjRect.Right() > nEndX) nEndX = aObjRect.Right(); } if (bSetVer) { if (aObjRect.Top() < nStartY) nStartY = aObjRect.Top(); if (aObjRect.Bottom() > nEndY) nEndY = aObjRect.Bottom(); } bAny = sal_True; } pObject = aIter.Next(); } } if ( bNegativePage ) { nStartX = -nStartX; // reverse transformation, so the same cell address calculation works nEndX = -nEndX; ::std::swap( nStartX, nEndX ); } if (bAny) { DBG_ASSERT( nStartX<=nEndX && nStartY<=nEndY, "Start/End falsch in ScDrawLayer::GetPrintArea" ); if (bSetHor) { nStartX = (long) (nStartX / HMM_PER_TWIPS); nEndX = (long) (nEndX / HMM_PER_TWIPS); long nWidth; SCCOL i; nWidth = 0; for (i=0; i<=MAXCOL && nWidth<=nStartX; i++) nWidth += pDoc->GetColWidth(i,nTab); rRange.aStart.SetCol( i>0 ? (i-1) : 0 ); nWidth = 0; for (i=0; i<=MAXCOL && nWidth<=nEndX; i++) //! bei Start anfangen nWidth += pDoc->GetColWidth(i,nTab); rRange.aEnd.SetCol( i>0 ? (i-1) : 0 ); } if (bSetVer) { nStartY = (long) (nStartY / HMM_PER_TWIPS); nEndY = (long) (nEndY / HMM_PER_TWIPS); SCROW nRow = pDoc->GetRowForHeight( nTab, nStartY); rRange.aStart.SetRow( nRow>0 ? (nRow-1) : 0); nRow = pDoc->GetRowForHeight( nTab, nEndY); rRange.aEnd.SetRow( nRow == MAXROW ? MAXROW : (nRow>0 ? (nRow-1) : 0)); } } else { if (bSetHor) { rRange.aStart.SetCol(0); rRange.aEnd.SetCol(0); } if (bSetVer) { rRange.aStart.SetRow(0); rRange.aEnd.SetRow(0); } } return bAny; } void ScDrawLayer::AddCalcUndo( SdrUndoAction* pUndo ) { if (bRecording) { if (!pUndoGroup) pUndoGroup = new SdrUndoGroup(*this); pUndoGroup->AddAction( pUndo ); } else delete pUndo; } void ScDrawLayer::BeginCalcUndo() { //! DBG_ASSERT( !bRecording, "BeginCalcUndo ohne GetCalcUndo" ); DELETEZ(pUndoGroup); bRecording = sal_True; } SdrUndoGroup* ScDrawLayer::GetCalcUndo() { //! DBG_ASSERT( bRecording, "GetCalcUndo ohne BeginCalcUndo" ); SdrUndoGroup* pRet = pUndoGroup; pUndoGroup = NULL; bRecording = sal_False; return pRet; } // MoveAreaTwips: all measures are kept in twips void ScDrawLayer::MoveAreaTwips( SCTAB nTab, const Rectangle& rArea, const Point& rMove, const Point& rTopLeft ) { if (!rMove.X() && !rMove.Y()) return; // nix SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page nicht gefunden"); if (!pPage) return; sal_Bool bNegativePage = pDoc && pDoc->IsNegativePage( nTab ); // fuer Shrinking! Rectangle aNew( rArea ); sal_Bool bShrink = sal_False; if ( rMove.X() < 0 || rMove.Y() < 0 ) // verkleinern { if ( rTopLeft != rArea.TopLeft() ) // sind gleich beim Verschieben von Zellen { bShrink = sal_True; aNew.Left() = rTopLeft.X(); aNew.Top() = rTopLeft.Y(); } } SdrObjListIter aIter( *pPage, IM_FLAT ); SdrObject* pObject = aIter.Next(); while (pObject) { if( GetAnchor( pObject ) == SCA_CELL ) { if ( GetObjData( pObject ) ) // Detektiv-Pfeil ? { // hier nichts } else if ( pObject->ISA( SdrEdgeObj ) ) // Verbinder? { // hier auch nichts //! nicht verbundene Enden wie bei Linien (s.u.) behandeln? } else if ( pObject->IsPolyObj() && pObject->GetPointCount()==2 ) { for (sal_uInt16 i=0; i<2; i++) { sal_Bool bMoved = sal_False; Point aPoint = pObject->GetPoint(i); lcl_ReverseTwipsToMM( aPoint ); if (rArea.IsInside(aPoint)) { aPoint += rMove; bMoved = sal_True; } else if (bShrink && aNew.IsInside(aPoint)) { // Punkt ist in betroffener Zelle - Test auf geloeschten Bereich if ( rMove.X() && aPoint.X() >= rArea.Left() + rMove.X() ) { aPoint.X() = rArea.Left() + rMove.X() - SHRINK_DIST_TWIPS; if ( aPoint.X() < 0 ) aPoint.X() = 0; bMoved = sal_True; } if ( rMove.Y() && aPoint.Y() >= rArea.Top() + rMove.Y() ) { aPoint.Y() = rArea.Top() + rMove.Y() - SHRINK_DIST_TWIPS; if ( aPoint.Y() < 0 ) aPoint.Y() = 0; bMoved = sal_True; } } if( bMoved ) { AddCalcUndo< SdrUndoGeoObj >( *pObject ); lcl_TwipsToMM( aPoint ); pObject->SetPoint( aPoint, i ); } } } else { Rectangle aObjRect = pObject->GetLogicRect(); // aOldMMPos: not converted, millimeters Point aOldMMPos = bNegativePage ? aObjRect.TopRight() : aObjRect.TopLeft(); lcl_ReverseTwipsToMM( aObjRect ); Point aTopLeft = bNegativePage ? aObjRect.TopRight() : aObjRect.TopLeft(); // logical left Size aMoveSize; sal_Bool bDoMove = sal_False; if (rArea.IsInside(aTopLeft)) { aMoveSize = Size(rMove.X(),rMove.Y()); bDoMove = sal_True; } else if (bShrink && aNew.IsInside(aTopLeft)) { // Position ist in betroffener Zelle - Test auf geloeschten Bereich if ( rMove.X() && aTopLeft.X() >= rArea.Left() + rMove.X() ) { aMoveSize.Width() = rArea.Left() + rMove.X() - SHRINK_DIST - aTopLeft.X(); bDoMove = sal_True; } if ( rMove.Y() && aTopLeft.Y() >= rArea.Top() + rMove.Y() ) { aMoveSize.Height() = rArea.Top() + rMove.Y() - SHRINK_DIST - aTopLeft.Y(); bDoMove = sal_True; } } if ( bDoMove ) { if ( bNegativePage ) { if ( aTopLeft.X() + aMoveSize.Width() > 0 ) aMoveSize.Width() = -aTopLeft.X(); } else { if ( aTopLeft.X() + aMoveSize.Width() < 0 ) aMoveSize.Width() = -aTopLeft.X(); } if ( aTopLeft.Y() + aMoveSize.Height() < 0 ) aMoveSize.Height() = -aTopLeft.Y(); // get corresponding move size in millimeters: Point aNewPos( aTopLeft.X() + aMoveSize.Width(), aTopLeft.Y() + aMoveSize.Height() ); lcl_TwipsToMM( aNewPos ); aMoveSize = Size( aNewPos.X() - aOldMMPos.X(), aNewPos.Y() - aOldMMPos.Y() ); // millimeters AddCalcUndo< SdrUndoMoveObj >( *pObject, aMoveSize ); pObject->Move( aMoveSize ); } else if ( rArea.IsInside( bNegativePage ? aObjRect.BottomLeft() : aObjRect.BottomRight() ) && !pObject->IsResizeProtect() ) { // geschuetzte Groessen werden nicht veraendert // (Positionen schon, weil sie ja an der Zelle "verankert" sind) AddCalcUndo< SdrUndoGeoObj >( *pObject ); long nOldSizeX = aObjRect.Right() - aObjRect.Left() + 1; long nOldSizeY = aObjRect.Bottom() - aObjRect.Top() + 1; long nLogMoveX = rMove.X() * ( bNegativePage ? -1 : 1 ); // logical direction pObject->Resize( aOldMMPos, Fraction( nOldSizeX+nLogMoveX, nOldSizeX ), Fraction( nOldSizeY+rMove.Y(), nOldSizeY ) ); } } } pObject = aIter.Next(); } } void ScDrawLayer::MoveArea( SCTAB nTab, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2, SCsCOL nDx,SCsROW nDy, sal_Bool bInsDel, bool bUpdateNoteCaptionPos ) { DBG_ASSERT( pDoc, "ScDrawLayer::MoveArea without document" ); if ( !pDoc ) return; if (!bAdjustEnabled) return; sal_Bool bNegativePage = pDoc->IsNegativePage( nTab ); Rectangle aRect = pDoc->GetMMRect( nCol1, nRow1, nCol2, nRow2, nTab ); lcl_ReverseTwipsToMM( aRect ); //! use twips directly? Point aMove; if (nDx > 0) for (SCsCOL s=0; sGetColWidth(s+(SCsCOL)nCol1,nTab); else for (SCsCOL s=-1; s>=nDx; s--) aMove.X() -= pDoc->GetColWidth(s+(SCsCOL)nCol1,nTab); if (nDy > 0) aMove.Y() += pDoc->GetRowHeight( nRow1, nRow1+nDy-1, nTab); else aMove.Y() -= pDoc->GetRowHeight( nRow1+nDy, nRow1-1, nTab); if ( bNegativePage ) aMove.X() = -aMove.X(); Point aTopLeft = aRect.TopLeft(); // Anfang beim Verkleinern if (bInsDel) { if ( aMove.X() != 0 && nDx < 0 ) // nDx counts cells, sign is independent of RTL aTopLeft.X() += aMove.X(); if ( aMove.Y() < 0 ) aTopLeft.Y() += aMove.Y(); } // drawing objects are now directly included in cut&paste // -> only update references when inserting/deleting (or changing widths or heights) if ( bInsDel ) MoveAreaTwips( nTab, aRect, aMove, aTopLeft ); // // Detektiv-Pfeile: Zellpositionen anpassen // MoveCells( nTab, nCol1,nRow1, nCol2,nRow2, nDx,nDy, bUpdateNoteCaptionPos ); } void ScDrawLayer::WidthChanged( SCTAB nTab, SCCOL nCol, long nDifTwips ) { DBG_ASSERT( pDoc, "ScDrawLayer::WidthChanged without document" ); if ( !pDoc ) return; if (!bAdjustEnabled) return; Rectangle aRect; Point aTopLeft; for (SCCOL i=0; iGetColWidth(i,nTab); aTopLeft.X() = aRect.Left(); aRect.Left() += pDoc->GetColWidth(nCol,nTab); aRect.Right() = MAXMM; aRect.Top() = 0; aRect.Bottom() = MAXMM; //! aTopLeft ist falsch, wenn mehrere Spalten auf einmal ausgeblendet werden sal_Bool bNegativePage = pDoc->IsNegativePage( nTab ); if ( bNegativePage ) { MirrorRectRTL( aRect ); aTopLeft.X() = -aTopLeft.X(); nDifTwips = -nDifTwips; } MoveAreaTwips( nTab, aRect, Point( nDifTwips,0 ), aTopLeft ); } void ScDrawLayer::HeightChanged( SCTAB nTab, SCROW nRow, long nDifTwips ) { DBG_ASSERT( pDoc, "ScDrawLayer::HeightChanged without document" ); if ( !pDoc ) return; if (!bAdjustEnabled) return; SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page not found"); if (!pPage) return; // for an empty page, there's no need to calculate the row heights if (!pPage->GetObjCount()) return; Rectangle aRect; Point aTopLeft; aRect.Top() += pDoc->GetRowHeight( 0, nRow-1, nTab); aTopLeft.Y() = aRect.Top(); aRect.Top() += pDoc->GetRowHeight(nRow, nTab); aRect.Bottom() = MAXMM; aRect.Left() = 0; aRect.Right() = MAXMM; //! aTopLeft ist falsch, wenn mehrere Zeilen auf einmal ausgeblendet werden sal_Bool bNegativePage = pDoc->IsNegativePage( nTab ); if ( bNegativePage ) { MirrorRectRTL( aRect ); aTopLeft.X() = -aTopLeft.X(); } MoveAreaTwips( nTab, aRect, Point( 0,nDifTwips ), aTopLeft ); } sal_Bool ScDrawLayer::HasObjectsInRows( SCTAB nTab, SCROW nStartRow, SCROW nEndRow, bool bIncludeNotes ) { DBG_ASSERT( pDoc, "ScDrawLayer::HasObjectsInRows without document" ); if ( !pDoc ) return sal_False; SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page not found"); if (!pPage) return sal_False; // for an empty page, there's no need to calculate the row heights if (!pPage->GetObjCount()) return sal_False; Rectangle aTestRect; aTestRect.Top() += pDoc->GetRowHeight( 0, nStartRow-1, nTab); if (nEndRow==MAXROW) aTestRect.Bottom() = MAXMM; else { aTestRect.Bottom() = aTestRect.Top(); aTestRect.Bottom() += pDoc->GetRowHeight( nStartRow, nEndRow, nTab); TwipsToMM( aTestRect.Bottom() ); } TwipsToMM( aTestRect.Top() ); aTestRect.Left() = 0; aTestRect.Right() = MAXMM; sal_Bool bNegativePage = pDoc->IsNegativePage( nTab ); if ( bNegativePage ) MirrorRectRTL( aTestRect ); sal_Bool bFound = sal_False; Rectangle aObjRect; SdrObjListIter aIter( *pPage ); SdrObject* pObject = aIter.Next(); while ( pObject && !bFound ) { aObjRect = pObject->GetSnapRect(); //! GetLogicRect ? // #i116164# note captions are handled separately, don't have to be included for each single row height change if ( (aTestRect.IsInside(aObjRect.TopLeft()) || aTestRect.IsInside(aObjRect.BottomLeft())) && (bIncludeNotes || !IsNoteCaption(pObject)) ) bFound = sal_True; pObject = aIter.Next(); } return bFound; } #if 0 void ScDrawLayer::DeleteObjects( SCTAB nTab ) { SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page ?"); if (!pPage) return; pPage->RecalcObjOrdNums(); long nDelCount = 0; sal_uLong nObjCount = pPage->GetObjCount(); if (nObjCount) { SdrObject** ppObj = new SdrObject*[nObjCount]; SdrObjListIter aIter( *pPage, IM_FLAT ); SdrObject* pObject = aIter.Next(); while (pObject) { // alle loeschen ppObj[nDelCount++] = pObject; pObject = aIter.Next(); } long i; if (bRecording) for (i=1; i<=nDelCount; i++) AddCalcUndo< SdrUndoRemoveObj >( *ppObj[nDelCount-i] ); for (i=1; i<=nDelCount; i++) pPage->RemoveObject( ppObj[nDelCount-i]->GetOrdNum() ); delete[] ppObj; } } #endif void ScDrawLayer::DeleteObjectsInArea( SCTAB nTab, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2 ) { DBG_ASSERT( pDoc, "ScDrawLayer::DeleteObjectsInArea without document" ); if ( !pDoc ) return; SdrPage* pPage = GetPage(static_cast(nTab)); DBG_ASSERT(pPage,"Page ?"); if (!pPage) return; pPage->RecalcObjOrdNums(); long nDelCount = 0; sal_uLong nObjCount = pPage->GetObjCount(); if (nObjCount) { Rectangle aDelRect = pDoc->GetMMRect( nCol1, nRow1, nCol2, nRow2, nTab ); SdrObject** ppObj = new SdrObject*[nObjCount]; SdrObjListIter aIter( *pPage, IM_FLAT ); SdrObject* pObject = aIter.Next(); while (pObject) { // do not delete note caption, they are always handled by the cell note // TODO: detective objects are still deleted, is this desired? if (!IsNoteCaption( pObject )) { Rectangle aObjRect = pObject->GetCurrentBoundRect(); if ( aDelRect.IsInside( aObjRect ) ) ppObj[nDelCount++] = pObject; } pObject = aIter.Next(); } long i; if (bRecording) for (i=1; i<=nDelCount; i++) AddCalcUndo< SdrUndoRemoveObj >( *ppObj[nDelCount-i] ); for (i=1; i<=nDelCount; i++) pPage->RemoveObject( ppObj[nDelCount-i]->GetOrdNum() ); delete[] ppObj; } } void ScDrawLayer::DeleteObjectsInSelection( const ScMarkData& rMark ) { DBG_ASSERT( pDoc, "ScDrawLayer::DeleteObjectsInSelection without document" ); if ( !pDoc ) return; if ( !rMark.IsMultiMarked() ) return; ScRange aMarkRange; rMark.GetMultiMarkArea( aMarkRange ); SCTAB nTabCount = pDoc->GetTableCount(); for (SCTAB nTab=0; nTab<=nTabCount; nTab++) if ( rMark.GetTableSelect( nTab ) ) { SdrPage* pPage = GetPage(static_cast(nTab)); if (pPage) { pPage->RecalcObjOrdNums(); long nDelCount = 0; sal_uLong nObjCount = pPage->GetObjCount(); if (nObjCount) { // Rechteck um die ganze Selektion Rectangle aMarkBound = pDoc->GetMMRect( aMarkRange.aStart.Col(), aMarkRange.aStart.Row(), aMarkRange.aEnd.Col(), aMarkRange.aEnd.Row(), nTab ); SdrObject** ppObj = new SdrObject*[nObjCount]; SdrObjListIter aIter( *pPage, IM_FLAT ); SdrObject* pObject = aIter.Next(); while (pObject) { // do not delete note caption, they are always handled by the cell note // TODO: detective objects are still deleted, is this desired? if (!IsNoteCaption( pObject )) { Rectangle aObjRect = pObject->GetCurrentBoundRect(); if ( aMarkBound.IsInside( aObjRect ) ) { ScRange aRange = pDoc->GetRange( nTab, aObjRect ); if (rMark.IsAllMarked(aRange)) ppObj[nDelCount++] = pObject; } } pObject = aIter.Next(); } // Objekte loeschen (rueckwaerts) long i; if (bRecording) for (i=1; i<=nDelCount; i++) AddCalcUndo< SdrUndoRemoveObj >( *ppObj[nDelCount-i] ); for (i=1; i<=nDelCount; i++) pPage->RemoveObject( ppObj[nDelCount-i]->GetOrdNum() ); delete[] ppObj; } } else { DBG_ERROR("pPage?"); } } } void ScDrawLayer::CopyToClip( ScDocument* pClipDoc, SCTAB nTab, const Rectangle& rRange ) { // copy everything in the specified range into the same page (sheet) in the clipboard doc SdrPage* pSrcPage = GetPage(static_cast(nTab)); if (pSrcPage) { ScDrawLayer* pDestModel = NULL; SdrPage* pDestPage = NULL; SdrObjListIter aIter( *pSrcPage, IM_FLAT ); SdrObject* pOldObject = aIter.Next(); while (pOldObject) { Rectangle aObjRect = pOldObject->GetCurrentBoundRect(); // do not copy internal objects (detective) and note captions if ( rRange.IsInside( aObjRect ) && (pOldObject->GetLayer() != SC_LAYER_INTERN) && !IsNoteCaption( pOldObject ) ) { if ( !pDestModel ) { pDestModel = pClipDoc->GetDrawLayer(); // does the document already have a drawing layer? if ( !pDestModel ) { // allocate drawing layer in clipboard document only if there are objects to copy pClipDoc->InitDrawLayer(); //! create contiguous pages pDestModel = pClipDoc->GetDrawLayer(); } if (pDestModel) pDestPage = pDestModel->GetPage( static_cast(nTab) ); } DBG_ASSERT( pDestPage, "no page" ); if (pDestPage) { // #116235# SdrObject* pNewObject = pOldObject->Clone(); //SdrObject* pNewObject = pOldObject->Clone( pDestPage, pDestModel ); pNewObject->SetModel(pDestModel); pNewObject->SetPage(pDestPage); uno::Reference< chart2::XChartDocument > xOldChart( ScChartHelper::GetChartFromSdrObject( pOldObject ) ); if(!xOldChart.is())//#i110034# do not move charts as they loose all their data references otherwise pNewObject->NbcMove(Size(0,0)); pDestPage->InsertObject( pNewObject ); // no undo needed in clipboard document // charts are not updated } } pOldObject = aIter.Next(); } } } sal_Bool lcl_IsAllInRange( const ::std::vector< ScRangeList >& rRangesVector, const ScRange& rClipRange ) { // check if every range of rRangesVector is completely in rClipRange ::std::vector< ScRangeList >::const_iterator aIt = rRangesVector.begin(); for( ;aIt!=rRangesVector.end(); ++aIt ) { const ScRangeList& rRanges = *aIt; sal_uLong nCount = rRanges.Count(); for (sal_uLong i=0; i& rRangesVector, const ScRange& rSourceRange, const ScAddress& rDestPos ) { sal_Bool bChanged = sal_False; ::std::vector< ScRangeList >::iterator aIt = rRangesVector.begin(); for( ;aIt!=rRangesVector.end(); ++aIt ) { ScRangeList& rRanges = *aIt; sal_uLong nCount = rRanges.Count(); for (sal_uLong i=0; iMove( nDiffX, nDiffY, nDiffZ ); bChanged = sal_True; } } } return bChanged; } void ScDrawLayer::CopyFromClip( ScDrawLayer* pClipModel, SCTAB nSourceTab, const Rectangle& rSourceRange, const ScAddress& rDestPos, const Rectangle& rDestRange ) { DBG_ASSERT( pDoc, "ScDrawLayer::CopyFromClip without document" ); if ( !pDoc ) return; if (!pClipModel) return; if (bDrawIsInUndo) //! can this happen? { DBG_ERROR("CopyFromClip, bDrawIsInUndo"); return; } sal_Bool bMirrorObj = ( rSourceRange.Left() < 0 && rSourceRange.Right() < 0 && rDestRange.Left() > 0 && rDestRange.Right() > 0 ) || ( rSourceRange.Left() > 0 && rSourceRange.Right() > 0 && rDestRange.Left() < 0 && rDestRange.Right() < 0 ); Rectangle aMirroredSource = rSourceRange; if ( bMirrorObj ) MirrorRectRTL( aMirroredSource ); SCTAB nDestTab = rDestPos.Tab(); SdrPage* pSrcPage = pClipModel->GetPage(static_cast(nSourceTab)); SdrPage* pDestPage = GetPage(static_cast(nDestTab)); DBG_ASSERT( pSrcPage && pDestPage, "draw page missing" ); if ( !pSrcPage || !pDestPage ) return; SdrObjListIter aIter( *pSrcPage, IM_FLAT ); SdrObject* pOldObject = aIter.Next(); ScDocument* pClipDoc = pClipModel->GetDocument(); // a clipboard document and its source share the same document item pool, // so the pointers can be compared to see if this is copy&paste within // the same document sal_Bool bSameDoc = pDoc && pClipDoc && pDoc->GetPool() == pClipDoc->GetPool(); sal_Bool bDestClip = pDoc && pDoc->IsClipboard(); //#i110034# charts need correct sheet names for xml range conversion during load //so the target sheet name is temporarily renamed (if we have any SdrObjects) String aDestTabName; sal_Bool bRestoreDestTabName = sal_False; if( pOldObject && !bSameDoc && !bDestClip ) { if( pDoc && pClipDoc ) { String aSourceTabName; if( pClipDoc->GetName( nSourceTab, aSourceTabName ) && pDoc->GetName( nDestTab, aDestTabName ) ) { if( !(aSourceTabName==aDestTabName) && pDoc->ValidNewTabName(aSourceTabName) ) { bRestoreDestTabName = pDoc->RenameTab( nDestTab, aSourceTabName ); //sal_Bool bUpdateRef = sal_True, sal_Bool bExternalDocument = sal_False } } } } // first mirror, then move Size aMove( rDestRange.Left() - aMirroredSource.Left(), rDestRange.Top() - aMirroredSource.Top() ); long nDestWidth = rDestRange.GetWidth(); long nDestHeight = rDestRange.GetHeight(); long nSourceWidth = rSourceRange.GetWidth(); long nSourceHeight = rSourceRange.GetHeight(); long nWidthDiff = nDestWidth - nSourceWidth; long nHeightDiff = nDestHeight - nSourceHeight; Fraction aHorFract(1,1); Fraction aVerFract(1,1); sal_Bool bResize = sal_False; // sizes can differ by 1 from twips->1/100mm conversion for equal cell sizes, // don't resize to empty size when pasting into hidden columns or rows if ( Abs(nWidthDiff) > 1 && nDestWidth > 1 && nSourceWidth > 1 ) { aHorFract = Fraction( nDestWidth, nSourceWidth ); bResize = sal_True; } if ( Abs(nHeightDiff) > 1 && nDestHeight > 1 && nSourceHeight > 1 ) { aVerFract = Fraction( nDestHeight, nSourceHeight ); bResize = sal_True; } Point aRefPos = rDestRange.TopLeft(); // for resizing (after moving) while (pOldObject) { Rectangle aObjRect = pOldObject->GetCurrentBoundRect(); // do not copy internal objects (detective) and note captions if ( rSourceRange.IsInside( aObjRect ) && (pOldObject->GetLayer() != SC_LAYER_INTERN) && !IsNoteCaption( pOldObject ) ) { // #116235# SdrObject* pNewObject = pOldObject->Clone(); //SdrObject* pNewObject = pOldObject->Clone( pDestPage, this ); pNewObject->SetModel(this); pNewObject->SetPage(pDestPage); if ( bMirrorObj ) MirrorRTL( pNewObject ); // first mirror, then move pNewObject->NbcMove( aMove ); if ( bResize ) pNewObject->NbcResize( aRefPos, aHorFract, aVerFract ); pDestPage->InsertObject( pNewObject ); if (bRecording) AddCalcUndo< SdrUndoInsertObj >( *pNewObject ); //#i110034# handle chart data references (after InsertObject) if ( pNewObject->GetObjIdentifier() == OBJ_OLE2 ) { uno::Reference< embed::XEmbeddedObject > xIPObj = ((SdrOle2Obj*)pNewObject)->GetObjRef(); uno::Reference< embed::XClassifiedObject > xClassified( xIPObj, uno::UNO_QUERY ); SvGlobalName aObjectClassName; if ( xClassified.is() ) { try { aObjectClassName = SvGlobalName( xClassified->getClassID() ); } catch( uno::Exception& ) { // TODO: handle error? } } if ( xIPObj.is() && SotExchange::IsChart( aObjectClassName ) ) { uno::Reference< chart2::XChartDocument > xNewChart( ScChartHelper::GetChartFromSdrObject( pNewObject ) ); if( xNewChart.is() && !xNewChart->hasInternalDataProvider() ) { String aChartName = ((SdrOle2Obj*)pNewObject)->GetPersistName(); ::std::vector< ScRangeList > aRangesVector; pDoc->GetChartRanges( aChartName, aRangesVector, pDoc ); if( !aRangesVector.empty() ) { sal_Bool bInSourceRange = sal_False; ScRange aClipRange; if ( pClipDoc ) { SCCOL nClipStartX; SCROW nClipStartY; SCCOL nClipEndX; SCROW nClipEndY; pClipDoc->GetClipStart( nClipStartX, nClipStartY ); pClipDoc->GetClipArea( nClipEndX, nClipEndY, sal_True ); nClipEndX = nClipEndX + nClipStartX; nClipEndY += nClipStartY; // GetClipArea returns the difference SCTAB nClipTab = bRestoreDestTabName ? nDestTab : nSourceTab; aClipRange = ScRange( nClipStartX, nClipStartY, nClipTab, nClipEndX, nClipEndY, nClipTab ); bInSourceRange = lcl_IsAllInRange( aRangesVector, aClipRange ); } // always lose references when pasting into a clipboard document (transpose) if ( ( bInSourceRange || bSameDoc ) && !bDestClip ) { if ( bInSourceRange ) { if ( rDestPos != aClipRange.aStart ) { // update the data ranges to the new (copied) position if ( lcl_MoveRanges( aRangesVector, aClipRange, rDestPos ) ) pDoc->SetChartRanges( aChartName, aRangesVector ); } } else { // leave the ranges unchanged } } else { // pasting into a new document without the complete source data // -> break connection to source data and switch to own data uno::Reference< chart::XChartDocument > xOldChartDoc( ScChartHelper::GetChartFromSdrObject( pOldObject ), uno::UNO_QUERY ); uno::Reference< chart::XChartDocument > xNewChartDoc( xNewChart, uno::UNO_QUERY ); if( xOldChartDoc.is() && xNewChartDoc.is() ) xNewChartDoc->attachData( xOldChartDoc->getData() ); // (see ScDocument::UpdateChartListenerCollection, PastingDrawFromOtherDoc) } } } } } } pOldObject = aIter.Next(); } if( bRestoreDestTabName ) pDoc->RenameTab( nDestTab, aDestTabName ); } void ScDrawLayer::MirrorRTL( SdrObject* pObj ) { sal_uInt16 nIdent = pObj->GetObjIdentifier(); // don't mirror OLE or graphics, otherwise ask the object // if it can be mirrored sal_Bool bCanMirror = ( nIdent != OBJ_GRAF && nIdent != OBJ_OLE2 ); if (bCanMirror) { SdrObjTransformInfoRec aInfo; pObj->TakeObjInfo( aInfo ); bCanMirror = aInfo.bMirror90Allowed; } if (bCanMirror) { Point aRef1( 0, 0 ); Point aRef2( 0, 1 ); if (bRecording) AddCalcUndo< SdrUndoGeoObj >( *pObj ); pObj->Mirror( aRef1, aRef2 ); } else { // Move instead of mirroring: // New start position is negative of old end position // -> move by sum of start and end position Rectangle aObjRect = pObj->GetLogicRect(); Size aMoveSize( -(aObjRect.Left() + aObjRect.Right()), 0 ); if (bRecording) AddCalcUndo< SdrUndoMoveObj >( *pObj, aMoveSize ); pObj->Move( aMoveSize ); } } // static void ScDrawLayer::MirrorRectRTL( Rectangle& rRect ) { // mirror and swap left/right long nTemp = rRect.Left(); rRect.Left() = -rRect.Right(); rRect.Right() = -nTemp; } Rectangle ScDrawLayer::GetCellRect( ScDocument& rDoc, const ScAddress& rPos, bool bMergedCell ) { Rectangle aCellRect; DBG_ASSERT( ValidColRowTab( rPos.Col(), rPos.Row(), rPos.Tab() ), "ScDrawLayer::GetCellRect - invalid cell address" ); if( ValidColRowTab( rPos.Col(), rPos.Row(), rPos.Tab() ) ) { // find top left position of passed cell address Point aTopLeft; for( SCCOL nCol = 0; nCol < rPos.Col(); ++nCol ) aTopLeft.X() += rDoc.GetColWidth( nCol, rPos.Tab() ); if( rPos.Row() > 0 ) aTopLeft.Y() += rDoc.GetRowHeight( 0, rPos.Row() - 1, rPos.Tab() ); // find bottom-right position of passed cell address ScAddress aEndPos = rPos; if( bMergedCell ) { const ScMergeAttr* pMerge = static_cast< const ScMergeAttr* >( rDoc.GetAttr( rPos.Col(), rPos.Row(), rPos.Tab(), ATTR_MERGE ) ); if( pMerge->GetColMerge() > 1 ) aEndPos.IncCol( pMerge->GetColMerge() - 1 ); if( pMerge->GetRowMerge() > 1 ) aEndPos.IncRow( pMerge->GetRowMerge() - 1 ); } Point aBotRight = aTopLeft; for( SCCOL nCol = rPos.Col(); nCol <= aEndPos.Col(); ++nCol ) aBotRight.X() += rDoc.GetColWidth( nCol, rPos.Tab() ); aBotRight.Y() += rDoc.GetRowHeight( rPos.Row(), aEndPos.Row(), rPos.Tab() ); // twips -> 1/100 mm aTopLeft.X() = static_cast< long >( aTopLeft.X() * HMM_PER_TWIPS ); aTopLeft.Y() = static_cast< long >( aTopLeft.Y() * HMM_PER_TWIPS ); aBotRight.X() = static_cast< long >( aBotRight.X() * HMM_PER_TWIPS ); aBotRight.Y() = static_cast< long >( aBotRight.Y() * HMM_PER_TWIPS ); aCellRect = Rectangle( aTopLeft, aBotRight ); if( rDoc.IsNegativePage( rPos.Tab() ) ) MirrorRectRTL( aCellRect ); } return aCellRect; } // static String ScDrawLayer::GetVisibleName( SdrObject* pObj ) { String aName = pObj->GetName(); if ( pObj->GetObjIdentifier() == OBJ_OLE2 ) { // #95575# For OLE, the user defined name (GetName) is used // if it's not empty (accepting possibly duplicate names), // otherwise the persist name is used so every object appears // in the Navigator at all. if ( !aName.Len() ) aName = static_cast(pObj)->GetPersistName(); } return aName; } inline sal_Bool IsNamedObject( SdrObject* pObj, const String& rName ) { // sal_True if rName is the object's Name or PersistName // (used to find a named object) return ( pObj->GetName() == rName || ( pObj->GetObjIdentifier() == OBJ_OLE2 && static_cast(pObj)->GetPersistName() == rName ) ); } SdrObject* ScDrawLayer::GetNamedObject( const String& rName, sal_uInt16 nId, SCTAB& rFoundTab ) const { sal_uInt16 nTabCount = GetPageCount(); for (sal_uInt16 nTab=0; nTabGetObjIdentifier() == nId ) if ( IsNamedObject( pObject, rName ) ) { rFoundTab = static_cast(nTab); return pObject; } pObject = aIter.Next(); } } } return NULL; } String ScDrawLayer::GetNewGraphicName( long* pnCounter ) const { String aBase = ScGlobal::GetRscString(STR_GRAPHICNAME); aBase += ' '; sal_Bool bThere = sal_True; String aGraphicName; SCTAB nDummy; long nId = pnCounter ? *pnCounter : 0; while (bThere) { ++nId; aGraphicName = aBase; aGraphicName += String::CreateFromInt32( nId ); bThere = ( GetNamedObject( aGraphicName, 0, nDummy ) != NULL ); } if ( pnCounter ) *pnCounter = nId; return aGraphicName; } void ScDrawLayer::EnsureGraphicNames() { // make sure all graphic objects have names (after Excel import etc.) sal_uInt16 nTabCount = GetPageCount(); for (sal_uInt16 nTab=0; nTabGetObjIdentifier() == OBJ_GRAF && pObject->GetName().Len() == 0 ) pObject->SetName( GetNewGraphicName( &nCounter ) ); pObject = aIter.Next(); } } } } void ScDrawLayer::SetAnchor( SdrObject* pObj, ScAnchorType eType ) { ScAnchorType eOldAnchorType = GetAnchor( pObj ); // Ein an der Seite verankertes Objekt zeichnet sich durch eine Anker-Pos // von (0,1) aus. Das ist ein shabby Trick, der aber funktioniert! Point aAnchor( 0, eType == SCA_PAGE ? 1 : 0 ); pObj->SetAnchorPos( aAnchor ); if ( eOldAnchorType != eType ) pObj->notifyShapePropertyChange( ::svx::eSpreadsheetAnchor ); } ScAnchorType ScDrawLayer::GetAnchor( const SdrObject* pObj ) { Point aAnchor( pObj->GetAnchorPos() ); return ( aAnchor.Y() != 0 ) ? SCA_PAGE : SCA_CELL; } ScDrawObjData* ScDrawLayer::GetObjData( SdrObject* pObj, sal_Bool bCreate ) // static { sal_uInt16 nCount = pObj ? pObj->GetUserDataCount() : 0; for( sal_uInt16 i = 0; i < nCount; i++ ) { SdrObjUserData* pData = pObj->GetUserData( i ); if( pData && pData->GetInventor() == SC_DRAWLAYER && pData->GetId() == SC_UD_OBJDATA ) return (ScDrawObjData*) pData; } if( pObj && bCreate ) { ScDrawObjData* pData = new ScDrawObjData; pObj->InsertUserData( pData, 0 ); return pData; } return 0; } ScDrawObjData* ScDrawLayer::GetObjDataTab( SdrObject* pObj, SCTAB nTab ) // static { ScDrawObjData* pData = GetObjData( pObj ); if ( pData ) { if ( pData->maStart.IsValid() ) pData->maStart.SetTab( nTab ); if ( pData->maEnd.IsValid() ) pData->maEnd.SetTab( nTab ); } return pData; } bool ScDrawLayer::IsNoteCaption( SdrObject* pObj ) { ScDrawObjData* pData = pObj ? GetObjData( pObj ) : 0; return pData && pData->mbNote; } ScDrawObjData* ScDrawLayer::GetNoteCaptionData( SdrObject* pObj, SCTAB nTab ) { ScDrawObjData* pData = pObj ? GetObjDataTab( pObj, nTab ) : 0; return (pData && pData->mbNote) ? pData : 0; } ScIMapInfo* ScDrawLayer::GetIMapInfo( SdrObject* pObj ) // static { sal_uInt16 nCount = pObj->GetUserDataCount(); for( sal_uInt16 i = 0; i < nCount; i++ ) { SdrObjUserData* pData = pObj->GetUserData( i ); if( pData && pData->GetInventor() == SC_DRAWLAYER && pData->GetId() == SC_UD_IMAPDATA ) return (ScIMapInfo*) pData; } return NULL; } // static: IMapObject* ScDrawLayer::GetHitIMapObject( SdrObject* pObj, const Point& rWinPoint, const Window& rCmpWnd ) { const MapMode aMap100( MAP_100TH_MM ); MapMode aWndMode = rCmpWnd.GetMapMode(); Point aRelPoint( rCmpWnd.LogicToLogic( rWinPoint, &aWndMode, &aMap100 ) ); Rectangle aLogRect = rCmpWnd.LogicToLogic( pObj->GetLogicRect(), &aWndMode, &aMap100 ); ScIMapInfo* pIMapInfo = GetIMapInfo( pObj ); IMapObject* pIMapObj = NULL; if ( pIMapInfo ) { Size aGraphSize; ImageMap& rImageMap = (ImageMap&) pIMapInfo->GetImageMap(); Graphic aGraphic; sal_Bool bObjSupported = sal_False; if ( pObj->ISA( SdrGrafObj ) ) // einfaches Grafik-Objekt { const SdrGrafObj* pGrafObj = (const SdrGrafObj*) pObj; const GeoStat& rGeo = pGrafObj->GetGeoStat(); const Graphic& rGraphic = pGrafObj->GetGraphic(); // Drehung rueckgaengig if ( rGeo.nDrehWink ) RotatePoint( aRelPoint, aLogRect.TopLeft(), -rGeo.nSin, rGeo.nCos ); // Spiegelung rueckgaengig if ( ( (const SdrGrafObjGeoData*) pGrafObj->GetGeoData() )->bMirrored ) aRelPoint.X() = aLogRect.Right() + aLogRect.Left() - aRelPoint.X(); // ggf. Unshear: if ( rGeo.nShearWink ) ShearPoint( aRelPoint, aLogRect.TopLeft(), -rGeo.nTan ); if ( rGraphic.GetPrefMapMode().GetMapUnit() == MAP_PIXEL ) aGraphSize = rCmpWnd.PixelToLogic( rGraphic.GetPrefSize(), aMap100 ); else aGraphSize = OutputDevice::LogicToLogic( rGraphic.GetPrefSize(), rGraphic.GetPrefMapMode(), aMap100 ); bObjSupported = sal_True; } else if ( pObj->ISA( SdrOle2Obj ) ) // OLE-Objekt { // TODO/LEAN: working with visual area needs running state aGraphSize = ((SdrOle2Obj*)pObj)->GetOrigObjSize(); bObjSupported = sal_True; } // hat alles geklappt, dann HitTest ausfuehren if ( bObjSupported ) { // relativen Mauspunkt berechnen aRelPoint -= aLogRect.TopLeft(); pIMapObj = rImageMap.GetHitIMapObject( aGraphSize, aLogRect.GetSize(), aRelPoint ); } } return pIMapObj; } ScMacroInfo* ScDrawLayer::GetMacroInfo( SdrObject* pObj, sal_Bool bCreate ) // static { sal_uInt16 nCount = pObj->GetUserDataCount(); for( sal_uInt16 i = 0; i < nCount; i++ ) { SdrObjUserData* pData = pObj->GetUserData( i ); if( pData && pData->GetInventor() == SC_DRAWLAYER && pData->GetId() == SC_UD_MACRODATA ) return (ScMacroInfo*) pData; } if ( bCreate ) { ScMacroInfo* pData = new ScMacroInfo; pObj->InsertUserData( pData, 0 ); return pData; } return 0; } void ScDrawLayer::SetGlobalDrawPersist(SfxObjectShell* pPersist) // static { DBG_ASSERT(!pGlobalDrawPersist,"SetGlobalDrawPersist mehrfach"); pGlobalDrawPersist = pPersist; } void __EXPORT ScDrawLayer::SetChanged( sal_Bool bFlg /* = sal_True */ ) { if ( bFlg && pDoc ) pDoc->SetChartListenerCollectionNeedsUpdate( sal_True ); FmFormModel::SetChanged( bFlg ); } SvStream* __EXPORT ScDrawLayer::GetDocumentStream(SdrDocumentStreamInfo& rStreamInfo) const { DBG_ASSERT( pDoc, "ScDrawLayer::GetDocumentStream without document" ); if ( !pDoc ) return NULL; uno::Reference< embed::XStorage > xStorage = pDoc->GetDocumentShell() ? pDoc->GetDocumentShell()->GetStorage() : NULL; SvStream* pRet = NULL; if( xStorage.is() ) { if( rStreamInfo.maUserData.Len() && ( rStreamInfo.maUserData.GetToken( 0, ':' ) == String( RTL_CONSTASCII_USTRINGPARAM( "vnd.sun.star.Package" ) ) ) ) { const String aPicturePath( rStreamInfo.maUserData.GetToken( 1, ':' ) ); // graphic from picture stream in picture storage in XML package if( aPicturePath.GetTokenCount( '/' ) == 2 ) { const String aPictureStreamName( aPicturePath.GetToken( 1, '/' ) ); const String aPictureStorageName( aPicturePath.GetToken( 0, '/' ) ); try { if ( xStorage->isStorageElement( aPictureStorageName ) ) { uno::Reference< embed::XStorage > xPictureStorage = xStorage->openStorageElement( aPictureStorageName, embed::ElementModes::READ ); if( xPictureStorage.is() && xPictureStorage->isStreamElement( aPictureStreamName ) ) { uno::Reference< io::XStream > xStream = xPictureStorage->openStreamElement( aPictureStreamName, embed::ElementModes::READ ); if ( xStream.is() ) pRet = ::utl::UcbStreamHelper::CreateStream( xStream ); } } } catch( uno::Exception& ) { // TODO: error handling } } } // the following code seems to be related to binary format //REMOVE else //REMOVE { //REMOVE pRet = pStor->OpenStream( String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM(STRING_SCSTREAM)), //REMOVE STREAM_READ | STREAM_WRITE | STREAM_TRUNC ); //REMOVE //REMOVE if( pRet ) //REMOVE { //REMOVE pRet->SetVersion( pStor->GetVersion() ); //REMOVE pRet->SetKey( pStor->GetKey() ); //REMOVE } //REMOVE } rStreamInfo.mbDeleteAfterUse = ( pRet != NULL ); } return pRet; } //REMOVE void ScDrawLayer::ReleasePictureStorage() //REMOVE { //REMOVE xPictureStorage.Clear(); //REMOVE } SdrLayerID __EXPORT ScDrawLayer::GetControlExportLayerId( const SdrObject & ) const { // Layer fuer Export von Form-Controls in Versionen vor 5.0 - immer SC_LAYER_FRONT return SC_LAYER_FRONT; } ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > ScDrawLayer::createUnoModel() { ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > xRet; if( pDoc && pDoc->GetDocumentShell() ) xRet = pDoc->GetDocumentShell()->GetModel(); return xRet; }