/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_svx.hxx" #include #define _USE_MATH_DEFINES #include #include // fuer TakeContour #include #include #include #include #include #include #include #include #include #include #include #include #include #include // Fuer Add/Del Ref #include // fuer Dragging (Ortho abfragen) #include "svx/svdglob.hxx" // StringCache #include // Objektname #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // Factory #include // NotPersistItems #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "svx/xlinjoit.hxx" #include #include #include #include #include #include #include #include #include #include // FRound #include // #97849# #include #include #include #include "svdoimp.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "svx/svdotable.hxx" #include "svx/shapepropertynotifier.hxx" #include #include #include #include using namespace ::com::sun::star; // #104018# replace macros above with type-detecting methods inline double ImplTwipsToMM(double fVal) { return (fVal * (127.0 / 72.0)); } inline double ImplMMToTwips(double fVal) { return (fVal * (72.0 / 127.0)); } //////////////////////////////////////////////////////////////////////////////////////////////////// TYPEINIT0(SdrObjUserCall); SdrObjUserCall::~SdrObjUserCall() { } void SdrObjUserCall::Changed(const SdrObject& /*rObj*/, SdrUserCallType /*eType*/, const Rectangle& /*rOldBoundRect*/) { } //////////////////////////////////////////////////////////////////////////////////////////////////// TYPEINIT0(SdrObjUserData); void SdrObjUserData::operator=(const SdrObjUserData& /*rData*/) // nicht implementiert { } sal_Bool SdrObjUserData::operator==(const SdrObjUserData& /*rData*/) const // nicht implementiert { return sal_False; } sal_Bool SdrObjUserData::operator!=(const SdrObjUserData& /*rData*/) const // nicht implementiert { return sal_False; } SdrObjUserData::~SdrObjUserData() { } FASTBOOL SdrObjUserData::HasMacro(const SdrObject* /*pObj*/) const { return sal_False; } SdrObject* SdrObjUserData::CheckMacroHit(const SdrObjMacroHitRec& rRec, const SdrObject* pObj) const { if(pObj) { if(rRec.pPageView) { return SdrObjectPrimitiveHit(*pObj, rRec.aPos, rRec.nTol, *rRec.pPageView, rRec.pVisiLayer, false); } } return 0; } Pointer SdrObjUserData::GetMacroPointer(const SdrObjMacroHitRec& /*rRec*/, const SdrObject* /*pObj*/) const { return Pointer(POINTER_REFHAND); } void SdrObjUserData::PaintMacro(OutputDevice& rOut, const Rectangle& /*rDirtyRect*/, const SdrObjMacroHitRec& /*rRec*/, const SdrObject* pObj) const { if(!pObj) return; const RasterOp eRop(rOut.GetRasterOp()); const basegfx::B2DPolyPolygon aPolyPolygon(pObj->TakeXorPoly()); const sal_uInt32 nCount(aPolyPolygon.count()); rOut.SetLineColor(COL_BLACK); rOut.SetFillColor(); rOut.SetRasterOp(ROP_INVERT); for(sal_uInt32 a(0); a < nCount; a++) { rOut.DrawPolyLine(aPolyPolygon.getB2DPolygon(a)); } rOut.SetRasterOp(eRop); } FASTBOOL SdrObjUserData::DoMacro(const SdrObjMacroHitRec& /*rRec*/, SdrObject* /*pObj*/) { return sal_False; } XubString SdrObjUserData::GetMacroPopupComment(const SdrObjMacroHitRec& /*rRec*/, const SdrObject* /*pObj*/) const { return String(); } void SdrObjUserDataList::Clear() { sal_uInt16 nAnz=GetUserDataCount(); for (sal_uInt16 i=0; iGetUserDataCount(); if (nAnz!=0) { pNeuPlusData->pUserDataList=new SdrObjUserDataList; for (sal_uInt16 i=0; iGetUserData(i)->Clone(pObj1); if (pNeuUserData!=NULL) { pNeuPlusData->pUserDataList->InsertUserData(pNeuUserData); } else { DBG_ERROR("SdrObjPlusData::Clone(): UserData.Clone() liefert NULL"); } } } } if (pGluePoints!=NULL) pNeuPlusData->pGluePoints=new SdrGluePointList(*pGluePoints); // MtfAnimator wird auch nicht mitkopiert // #i68101# // copy object name, title and description pNeuPlusData->aObjName = aObjName; pNeuPlusData->aObjTitle = aObjTitle; pNeuPlusData->aObjDescription = aObjDescription; if (pAutoTimer!=NULL) { pNeuPlusData->pAutoTimer=new AutoTimer; // Handler, etc. nicht mitkopieren! } // For HTMLName: Do not clone, leave uninitialized (empty string) return pNeuPlusData; } //////////////////////////////////////////////////////////////////////////////////////////////////// // // @@@@ @@@@@ @@@@@@ @@@@@ @@@@ @@@@@@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@@@@ @@ @@@@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@@@ @@@@@ @@@@ @@@@@ @@@@ @@ // //////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // BaseProperties section sdr::properties::BaseProperties* SdrObject::CreateObjectSpecificProperties() { return new sdr::properties::EmptyProperties(*this); } sdr::properties::BaseProperties& SdrObject::GetProperties() const { if(!mpProperties) { const_cast< SdrObject* >(this)->mpProperties = const_cast< SdrObject* >(this)->CreateObjectSpecificProperties(); } return *mpProperties; } ////////////////////////////////////////////////////////////////////////////// // ObjectUser section void SdrObject::AddObjectUser(sdr::ObjectUser& rNewUser) { maObjectUsers.push_back(&rNewUser); } void SdrObject::RemoveObjectUser(sdr::ObjectUser& rOldUser) { const ::sdr::ObjectUserVector::iterator aFindResult = ::std::find(maObjectUsers.begin(), maObjectUsers.end(), &rOldUser); if(aFindResult != maObjectUsers.end()) { maObjectUsers.erase(aFindResult); } } ////////////////////////////////////////////////////////////////////////////// // #110094# DrawContact section sdr::contact::ViewContact* SdrObject::CreateObjectSpecificViewContact() { return new sdr::contact::ViewContactOfSdrObj(*this); } sdr::contact::ViewContact& SdrObject::GetViewContact() const { if(!mpViewContact) { const_cast< SdrObject* >(this)->mpViewContact = const_cast< SdrObject* >(this)->CreateObjectSpecificViewContact(); } return *mpViewContact; } // DrawContact support: Methods for handling Object changes void SdrObject::ActionChanged() const { // Do necessary ViewContact actions GetViewContact().ActionChanged(); } ////////////////////////////////////////////////////////////////////////////// void SdrObject::SetBoundRectDirty() { aOutRect = Rectangle(); } ////////////////////////////////////////////////////////////////////////////// DBG_NAME(SdrObject); TYPEINIT1(SdrObject,SfxListener); SdrObject::SdrObject() :mpProperties(0L) ,mpViewContact(0L) ,pObjList(NULL) ,pPage(NULL) ,pModel(NULL) ,pUserCall(NULL) ,pPlusData(NULL) ,nOrdNum(0) ,mnNavigationPosition(SAL_MAX_UINT32) ,mnLayerID(0) ,mpSvxShape( NULL ) ,maWeakUnoShape() { DBG_CTOR(SdrObject,NULL); bVirtObj =sal_False; bSnapRectDirty =sal_True; bNetLock =sal_False; bInserted =sal_False; bGrouped =sal_False; bMovProt =sal_False; bSizProt =sal_False; bNoPrint =sal_False; bEmptyPresObj =sal_False; bNotVisibleAsMaster=sal_False; bClosedObj =sal_False; mbVisible = true; // #i25616# mbLineIsOutsideGeometry = sal_False; // #i25616# mbSupportTextIndentingOnLineWidthChange = sal_False; //#110094#-1 //bWriterFlyFrame =sal_False; bNotMasterCachable=sal_False; bIsEdge=sal_False; bIs3DObj=sal_False; bMarkProt=sal_False; bIsUnoObj=sal_False; } SdrObject::~SdrObject() { // tell all the registered ObjectUsers that the page is in destruction ::sdr::ObjectUserVector aListCopy(maObjectUsers.begin(), maObjectUsers.end()); for(::sdr::ObjectUserVector::iterator aIterator = aListCopy.begin(); aIterator != aListCopy.end(); aIterator++) { sdr::ObjectUser* pObjectUser = *aIterator; DBG_ASSERT(pObjectUser, "SdrObject::~SdrObject: corrupt ObjectUser list (!)"); pObjectUser->ObjectInDestruction(*this); } // Clear the vector. This means that user do not need to call RemoveObjectUser() // when they get called from ObjectInDestruction(). maObjectUsers.clear(); try { SvxShape* pSvxShape = getSvxShape(); if ( pSvxShape ) { OSL_ENSURE(!pSvxShape->HasSdrObjectOwnership(),"Please check where this call come from and replace it with SdrObject::Free"); pSvxShape->InvalidateSdrObject(); uno::Reference< lang::XComponent > xShapeComp( getWeakUnoShape(), uno::UNO_QUERY_THROW ); xShapeComp->dispose(); } } catch( const uno::Exception& ) { DBG_UNHANDLED_EXCEPTION(); } DBG_DTOR(SdrObject,NULL); SendUserCall(SDRUSERCALL_DELETE, GetLastBoundRect()); if (pPlusData!=NULL) delete pPlusData; if(mpProperties) { delete mpProperties; mpProperties = 0L; } // #110094# if(mpViewContact) { delete mpViewContact; mpViewContact = 0L; } } void SdrObject::Free( SdrObject*& _rpObject ) { SdrObject* pObject = _rpObject; _rpObject = NULL; if ( pObject == NULL ) // nothing to do return; SvxShape* pShape = pObject->getSvxShape(); if ( pShape && pShape->HasSdrObjectOwnership() ) // only the shape is allowed to delete me, and will reset the ownership before doing so return; delete pObject; } SdrObjPlusData* SdrObject::NewPlusData() const { return new SdrObjPlusData; } void SdrObject::SetRectsDirty(sal_Bool bNotMyself) { if (!bNotMyself) { SetBoundRectDirty(); bSnapRectDirty=sal_True; } if (pObjList!=NULL) { pObjList->SetRectsDirty(); } } void SdrObject::SetModel(SdrModel* pNewModel) { if(pNewModel && pPage) { if(pPage->GetModel() != pNewModel) { pPage = NULL; } } // update listeners at possible api wrapper object if( pModel != pNewModel ) { SvxShape* pShape = getSvxShape(); if( pShape ) pShape->ChangeModel( pNewModel ); } pModel = pNewModel; } void SdrObject::SetObjList(SdrObjList* pNewObjList) { pObjList=pNewObjList; } void SdrObject::SetPage(SdrPage* pNewPage) { pPage=pNewPage; if (pPage!=NULL) { SdrModel* pMod=pPage->GetModel(); if (pMod!=pModel && pMod!=NULL) { SetModel(pMod); }} } // init global static itempool SdrItemPool* SdrObject::mpGlobalItemPool = NULL; SdrItemPool& SdrObject::GetGlobalDrawObjectItemPool() { if(!mpGlobalItemPool) { mpGlobalItemPool = new SdrItemPool(); SfxItemPool* pGlobalOutlPool = EditEngine::CreatePool(); mpGlobalItemPool->SetSecondaryPool(pGlobalOutlPool); mpGlobalItemPool->SetDefaultMetric((SfxMapUnit)SdrEngineDefaults::GetMapUnit()); mpGlobalItemPool->FreezeIdRanges(); } return *mpGlobalItemPool; } void SdrObject::FreeGlobalDrawObjectItemPool() { // code for deletion of GlobalItemPool if(mpGlobalItemPool) { SfxItemPool* pGlobalOutlPool = mpGlobalItemPool->GetSecondaryPool(); SfxItemPool::Free(mpGlobalItemPool); SfxItemPool::Free(pGlobalOutlPool); } } SdrItemPool* SdrObject::GetObjectItemPool() const { if(pModel) return (SdrItemPool*)(&pModel->GetItemPool()); // use a static global default pool return &SdrObject::GetGlobalDrawObjectItemPool(); } sal_uInt32 SdrObject::GetObjInventor() const { return SdrInventor; } sal_uInt16 SdrObject::GetObjIdentifier() const { return sal_uInt16(OBJ_NONE); } void SdrObject::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { rInfo.bRotateFreeAllowed=sal_False; rInfo.bMirrorFreeAllowed=sal_False; rInfo.bTransparenceAllowed = sal_False; rInfo.bGradientAllowed = sal_False; rInfo.bShearAllowed =sal_False; rInfo.bEdgeRadiusAllowed=sal_False; rInfo.bCanConvToPath =sal_False; rInfo.bCanConvToPoly =sal_False; rInfo.bCanConvToContour = sal_False; rInfo.bCanConvToPathLineToArea=sal_False; rInfo.bCanConvToPolyLineToArea=sal_False; } SdrLayerID SdrObject::GetLayer() const { return mnLayerID; } void SdrObject::getMergedHierarchyLayerSet(SetOfByte& rSet) const { rSet.Set(GetLayer()); SdrObjList* pOL=GetSubList(); if (pOL!=NULL) { sal_uIntPtr nObjAnz=pOL->GetObjCount(); for (sal_uIntPtr nObjNum=0; nObjNumGetObj(nObjNum)->getMergedHierarchyLayerSet(rSet); } } } void SdrObject::NbcSetLayer(SdrLayerID nLayer) { if(GetLayer() != nLayer) { mnLayerID = nLayer; } } void SdrObject::SetLayer(SdrLayerID nLayer) { NbcSetLayer(nLayer); SetChanged(); BroadcastObjectChange(); } void SdrObject::AddListener(SfxListener& rListener) { ImpForcePlusData(); if (pPlusData->pBroadcast==NULL) pPlusData->pBroadcast=new SfxBroadcaster; rListener.StartListening(*pPlusData->pBroadcast); } void SdrObject::RemoveListener(SfxListener& rListener) { if (pPlusData!=NULL && pPlusData->pBroadcast!=NULL) { rListener.EndListening(*pPlusData->pBroadcast); if (!pPlusData->pBroadcast->HasListeners()) { delete pPlusData->pBroadcast; pPlusData->pBroadcast=NULL; } } } void SdrObject::AddReference(SdrVirtObj& rVrtObj) { AddListener(rVrtObj); } void SdrObject::DelReference(SdrVirtObj& rVrtObj) { RemoveListener(rVrtObj); } AutoTimer* SdrObject::ForceAutoTimer() { ImpForcePlusData(); if (pPlusData->pAutoTimer==NULL) pPlusData->pAutoTimer=new AutoTimer; return pPlusData->pAutoTimer; } FASTBOOL SdrObject::HasRefPoint() const { return sal_False; } Point SdrObject::GetRefPoint() const { return GetCurrentBoundRect().Center(); } void SdrObject::SetRefPoint(const Point& /*rPnt*/) { } SdrObjList* SdrObject::GetSubList() const { return NULL; } SdrObject* SdrObject::GetUpGroup() const { return pObjList!=NULL ? pObjList->GetOwnerObj() : NULL; } void SdrObject::SetName(const String& rStr) { if(rStr.Len() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjName != rStr) { // --> OD 2009-07-09 #i73249# // Undo/Redo for setting object's name bool bUndo( false ); if ( GetModel() && GetModel()->IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = GetModel()->GetSdrUndoFactory().CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::OBJ_NAME, GetName(), rStr ); GetModel()->BegUndo( pUndoAction->GetComment() ); GetModel()->AddUndo( pUndoAction ); } // <-- pPlusData->aObjName = rStr; // --> OD 2009-07-09 #i73249# if ( bUndo ) { GetModel()->EndUndo(); } // <-- SetChanged(); BroadcastObjectChange(); } } String SdrObject::GetName() const { if(pPlusData) { return pPlusData->aObjName; } return String(); } void SdrObject::SetTitle(const String& rStr) { if(rStr.Len() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjTitle != rStr) { // --> OD 2009-07-13 #i73249# // Undo/Redo for setting object's title bool bUndo( false ); if ( GetModel() && GetModel()->IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = GetModel()->GetSdrUndoFactory().CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::OBJ_TITLE, GetTitle(), rStr ); GetModel()->BegUndo( pUndoAction->GetComment() ); GetModel()->AddUndo( pUndoAction ); } // <-- pPlusData->aObjTitle = rStr; // --> OD 2009-07-13 #i73249# if ( bUndo ) { GetModel()->EndUndo(); } // <-- SetChanged(); BroadcastObjectChange(); } } String SdrObject::GetTitle() const { if(pPlusData) { return pPlusData->aObjTitle; } return String(); } void SdrObject::SetDescription(const String& rStr) { if(rStr.Len() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjDescription != rStr) { // --> OD 2009-07-13 #i73249# // Undo/Redo for setting object's description bool bUndo( false ); if ( GetModel() && GetModel()->IsUndoEnabled() ) { bUndo = true; SdrUndoAction* pUndoAction = GetModel()->GetSdrUndoFactory().CreateUndoObjectStrAttr( *this, SdrUndoObjStrAttr::OBJ_DESCRIPTION, GetDescription(), rStr ); GetModel()->BegUndo( pUndoAction->GetComment() ); GetModel()->AddUndo( pUndoAction ); } // <-- pPlusData->aObjDescription = rStr; // --> OD 2009-07-13 #i73249# if ( bUndo ) { GetModel()->EndUndo(); } // <-- SetChanged(); BroadcastObjectChange(); } } String SdrObject::GetDescription() const { if(pPlusData) { return pPlusData->aObjDescription; } return String(); } void SdrObject::SetHTMLName(const String& rStr) { if(rStr.Len() && !pPlusData) { ImpForcePlusData(); } if(pPlusData && pPlusData->aObjName != rStr) { pPlusData->aHTMLName = rStr; SetChanged(); } } String SdrObject::GetHTMLName() const { if(pPlusData) { return pPlusData->aHTMLName; } return String(); } sal_uInt32 SdrObject::GetOrdNum() const { if (pObjList!=NULL) { if (pObjList->IsObjOrdNumsDirty()) { pObjList->RecalcObjOrdNums(); } } else ((SdrObject*)this)->nOrdNum=0; return nOrdNum; } sal_uInt32 SdrObject::GetNavigationPosition (void) { if (pObjList!=NULL && pObjList->RecalcNavigationPositions()) { return mnNavigationPosition; } else return GetOrdNum(); } void SdrObject::SetNavigationPosition (const sal_uInt32 nNewPosition) { mnNavigationPosition = nNewPosition; } // #111111# // To make clearer that this method may trigger RecalcBoundRect and thus may be // expensive and sometimes problematic (inside a bigger object change You will get // non-useful BoundRects sometimes) i rename that method from GetBoundRect() to // GetCurrentBoundRect(). const Rectangle& SdrObject::GetCurrentBoundRect() const { if(aOutRect.IsEmpty()) { const_cast< SdrObject* >(this)->RecalcBoundRect(); } return aOutRect; } // #111111# // To have a possibility to get the last calculated BoundRect e.g for producing // the first rectangle for repaints (old and new need to be used) without forcing // a RecalcBoundRect (which may be problematical and expensive sometimes) i add here // a new method for accessing the last BoundRect. const Rectangle& SdrObject::GetLastBoundRect() const { return aOutRect; } void SdrObject::RecalcBoundRect() { // #i101680# suppress BoundRect calculations on import(s) if(pModel && pModel->isLocked()) return; // central new method which will calculate the BoundRect using primitive geometry if(aOutRect.IsEmpty()) { const drawinglayer::primitive2d::Primitive2DSequence xPrimitives(GetViewContact().getViewIndependentPrimitive2DSequence()); if(xPrimitives.hasElements()) { // use neutral ViewInformation and get the range of the primitives const drawinglayer::geometry::ViewInformation2D aViewInformation2D; const basegfx::B2DRange aRange(drawinglayer::primitive2d::getB2DRangeFromPrimitive2DSequence(xPrimitives, aViewInformation2D)); if(!aRange.isEmpty()) { aOutRect = Rectangle( (sal_Int32)floor(aRange.getMinX()), (sal_Int32)floor(aRange.getMinY()), (sal_Int32)ceil(aRange.getMaxX()), (sal_Int32)ceil(aRange.getMaxY())); return; } } } } void SdrObject::BroadcastObjectChange() const { if( pModel && pModel->isLocked() ) return; sal_Bool bPlusDataBroadcast(pPlusData && pPlusData->pBroadcast); sal_Bool bObjectChange(IsInserted() && pModel); if(bPlusDataBroadcast || bObjectChange) { SdrHint aHint(*this); if(bPlusDataBroadcast) { pPlusData->pBroadcast->Broadcast(aHint); } if(bObjectChange) { pModel->Broadcast(aHint); } } } void SdrObject::SetChanged() { // #110094#-11 // For test purposes, use the new ViewContact for change // notification now. ActionChanged(); if(IsInserted() && pModel) { pModel->SetChanged(); } } // Tooling for painting a single object to a OutputDevice. sal_Bool SdrObject::SingleObjectPainter(OutputDevice& rOut) const { sdr::contact::SdrObjectVector aObjectVector; aObjectVector.push_back(const_cast< SdrObject* >(this)); sdr::contact::ObjectContactOfObjListPainter aPainter(rOut, aObjectVector, GetPage()); sdr::contact::DisplayInfo aDisplayInfo; // do processing aPainter.ProcessDisplay(aDisplayInfo); return sal_True; } sal_Bool SdrObject::LineGeometryUsageIsNecessary() const { XLineStyle eXLS = (XLineStyle)((const XLineStyleItem&)GetMergedItem(XATTR_LINESTYLE)).GetValue(); return (eXLS != XLINE_NONE); } SdrObject* SdrObject::Clone() const { SdrObject* pObj=SdrObjFactory::MakeNewObject(GetObjInventor(),GetObjIdentifier(),NULL); if (pObj!=NULL) { pObj->pModel=pModel; pObj->pPage=pPage; *pObj=*this; } return pObj; } void SdrObject::operator=(const SdrObject& rObj) { if(mpProperties) { delete mpProperties; mpProperties = 0L; } // #110094# if(mpViewContact) { delete mpViewContact; mpViewContact = 0L; } // The Clone() method uses the local copy constructor from the individual // sdr::properties::BaseProperties class. Since the target class maybe for another // draw object a SdrObject needs to be provided, as in the nromal constructor. mpProperties = &rObj.GetProperties().Clone(*this); pModel =rObj.pModel; aOutRect=rObj.aOutRect; mnLayerID = rObj.mnLayerID; aAnchor =rObj.aAnchor; bVirtObj=rObj.bVirtObj; bSizProt=rObj.bSizProt; bMovProt=rObj.bMovProt; bNoPrint=rObj.bNoPrint; mbVisible=rObj.mbVisible; bMarkProt=rObj.bMarkProt; //EmptyPresObj wird nicht kopiert: nun doch! (25-07-1995, Joe) bEmptyPresObj =rObj.bEmptyPresObj; //NotVisibleAsMaster wird nicht kopiert: nun doch! (25-07-1995, Joe) bNotVisibleAsMaster=rObj.bNotVisibleAsMaster; bSnapRectDirty=sal_True; //rObj.bSnapRectDirty; bNotMasterCachable=rObj.bNotMasterCachable; if (pPlusData!=NULL) { delete pPlusData; pPlusData=NULL; } if (rObj.pPlusData!=NULL) { pPlusData=rObj.pPlusData->Clone(this); } if (pPlusData!=NULL && pPlusData->pBroadcast!=NULL) { delete pPlusData->pBroadcast; // der Broadcaster wird nicht mitkopiert pPlusData->pBroadcast=NULL; } } void SdrObject::TakeObjNameSingul(XubString& rName) const { rName=ImpGetResStr(STR_ObjNameSingulNONE); String aName( GetName() ); if(aName.Len()) { rName += sal_Unicode(' '); rName += sal_Unicode('\''); rName += aName; rName += sal_Unicode('\''); } } void SdrObject::TakeObjNamePlural(XubString& rName) const { rName=ImpGetResStr(STR_ObjNamePluralNONE); } void SdrObject::ImpTakeDescriptionStr(sal_uInt16 nStrCacheID, XubString& rStr, sal_uInt16 nVal) const { rStr = ImpGetResStr(nStrCacheID); sal_Char aSearchText1[] = "%1"; sal_Char aSearchText2[] = "%2"; xub_StrLen nPos = rStr.SearchAscii(aSearchText1); if(nPos != STRING_NOTFOUND) { rStr.Erase(nPos, 2); XubString aObjName; TakeObjNameSingul(aObjName); rStr.Insert(aObjName, nPos); } nPos = rStr.SearchAscii(aSearchText2); if(nPos != STRING_NOTFOUND) { rStr.Erase(nPos, 2); rStr.Insert(UniString::CreateFromInt32(nVal), nPos); } } XubString SdrObject::GetWinkStr(long nWink, FASTBOOL bNoDegChar) const { XubString aStr; if (pModel!=NULL) { pModel->TakeWinkStr(nWink,aStr,bNoDegChar); } return aStr; } XubString SdrObject::GetMetrStr(long nVal, MapUnit /*eWantMap*/, FASTBOOL bNoUnitChars) const { XubString aStr; if (pModel!=NULL) { pModel->TakeMetricStr(nVal,aStr,bNoUnitChars); } return aStr; } basegfx::B2DPolyPolygon SdrObject::TakeXorPoly() const { basegfx::B2DPolyPolygon aRetval; const Rectangle aR(GetCurrentBoundRect()); const basegfx::B2DRange aRange(aR.Left(), aR.Top(), aR.Right(), aR.Bottom()); aRetval.append(basegfx::tools::createPolygonFromRect(aRange)); return aRetval; } basegfx::B2DPolyPolygon SdrObject::TakeContour() const { basegfx::B2DPolyPolygon aRetval; // create cloned object without text, but with XLINE_SOLID, // COL_BLACK as line color and XFILL_NONE SdrObject* pClone = Clone(); if(pClone) { const SdrTextObj* pTextObj = dynamic_cast< const SdrTextObj* >(this); if(pTextObj) { // no text and no text animation pClone->SetMergedItem(SdrTextAniKindItem(SDRTEXTANI_NONE)); pClone->SetOutlinerParaObject(0); } const SdrEdgeObj* pEdgeObj = dynamic_cast< const SdrEdgeObj* >(this); if(pEdgeObj) { // create connections if connector, will be cleaned up when // deleting the connector again SdrObject* pLeft = pEdgeObj->GetConnectedNode(sal_True); SdrObject* pRight = pEdgeObj->GetConnectedNode(sal_False); if(pLeft) { pClone->ConnectToNode(sal_True, pLeft); } if(pRight) { pClone->ConnectToNode(sal_False, pRight); } } SfxItemSet aNewSet(*GetObjectItemPool()); // #i101980# ignore LineWidth; that's what the old implementation // did. With linewidth, the result may be huge due to fat/thick // line decompositions aNewSet.Put(XLineWidthItem(0)); // solid black lines and no fill aNewSet.Put(XLineStyleItem(XLINE_SOLID)); aNewSet.Put(XLineColorItem(String(), Color(COL_BLACK))); aNewSet.Put(XFillStyleItem(XFILL_NONE)); pClone->SetMergedItemSet(aNewSet); // get sequence from clone const sdr::contact::ViewContact& rVC(pClone->GetViewContact()); const drawinglayer::primitive2d::Primitive2DSequence xSequence(rVC.getViewIndependentPrimitive2DSequence()); if(xSequence.hasElements()) { // use neutral ViewInformation const drawinglayer::geometry::ViewInformation2D aViewInformation2D; // create extractor, process and get result (with hairlines as opened polygons) drawinglayer::processor2d::ContourExtractor2D aExtractor(aViewInformation2D, false); aExtractor.process(xSequence); const basegfx::B2DPolyPolygonVector& rResult(aExtractor.getExtractedContour()); const sal_uInt32 nSize(rResult.size()); // when count is one, it is implied that the object has only it's normal // contour anyways and TakeCountour() is to return an empty PolyPolygon // (see old implementation for historical reasons) if(nSize > 1) { // the topology for contour is correctly a vector of PolyPolygons; for // historical reasons cut it back to a single PolyPolygon here for(sal_uInt32 a(0); a < nSize; a++) { aRetval.append(rResult[a]); } } } delete pClone; } return aRetval; } sal_uInt32 SdrObject::GetHdlCount() const { return 8L; } SdrHdl* SdrObject::GetHdl(sal_uInt32 nHdlNum) const { SdrHdl* pH=NULL; const Rectangle& rR=GetSnapRect(); switch (nHdlNum) { case 0: pH=new SdrHdl(rR.TopLeft(), HDL_UPLFT); break; // Oben links case 1: pH=new SdrHdl(rR.TopCenter(), HDL_UPPER); break; // Oben case 2: pH=new SdrHdl(rR.TopRight(), HDL_UPRGT); break; // Oben rechts case 3: pH=new SdrHdl(rR.LeftCenter(), HDL_LEFT ); break; // Links case 4: pH=new SdrHdl(rR.RightCenter(), HDL_RIGHT); break; // Rechts case 5: pH=new SdrHdl(rR.BottomLeft(), HDL_LWLFT); break; // Unten links case 6: pH=new SdrHdl(rR.BottomCenter(),HDL_LOWER); break; // Unten case 7: pH=new SdrHdl(rR.BottomRight(), HDL_LWRGT); break; // Unten rechts } return pH; } sal_uInt32 SdrObject::GetPlusHdlCount(const SdrHdl& /*rHdl*/) const { return 0L; } SdrHdl* SdrObject::GetPlusHdl(const SdrHdl& /*rHdl*/, sal_uInt32 /*nPlNum*/) const { return 0L; } void SdrObject::AddToHdlList(SdrHdlList& rHdlList) const { sal_uInt32 nAnz=GetHdlCount(); for (sal_uInt32 i=0L; iGetKind(); FASTBOOL bEcke=(eHdl==HDL_UPLFT || eHdl==HDL_UPRGT || eHdl==HDL_LWLFT || eHdl==HDL_LWRGT); FASTBOOL bOrtho=rDrag.GetView()!=NULL && rDrag.GetView()->IsOrtho(); FASTBOOL bBigOrtho=bEcke && bOrtho && rDrag.GetView()->IsBigOrtho(); Point aPos(rDrag.GetNow()); FASTBOOL bLft=(eHdl==HDL_UPLFT || eHdl==HDL_LEFT || eHdl==HDL_LWLFT); FASTBOOL bRgt=(eHdl==HDL_UPRGT || eHdl==HDL_RIGHT || eHdl==HDL_LWRGT); FASTBOOL bTop=(eHdl==HDL_UPRGT || eHdl==HDL_UPPER || eHdl==HDL_UPLFT); FASTBOOL bBtm=(eHdl==HDL_LWRGT || eHdl==HDL_LOWER || eHdl==HDL_LWLFT); if (bLft) aTmpRect.Left() =aPos.X(); if (bRgt) aTmpRect.Right() =aPos.X(); if (bTop) aTmpRect.Top() =aPos.Y(); if (bBtm) aTmpRect.Bottom()=aPos.Y(); if (bOrtho) { // Ortho long nWdt0=aRect.Right() -aRect.Left(); long nHgt0=aRect.Bottom()-aRect.Top(); long nXMul=aTmpRect.Right() -aTmpRect.Left(); long nYMul=aTmpRect.Bottom()-aTmpRect.Top(); long nXDiv=nWdt0; long nYDiv=nHgt0; FASTBOOL bXNeg=(nXMul<0)!=(nXDiv<0); FASTBOOL bYNeg=(nYMul<0)!=(nYDiv<0); nXMul=Abs(nXMul); nYMul=Abs(nYMul); nXDiv=Abs(nXDiv); nYDiv=Abs(nYDiv); Fraction aXFact(nXMul,nXDiv); // Fractions zum kuerzen Fraction aYFact(nYMul,nYDiv); // und zum vergleichen nXMul=aXFact.GetNumerator(); nYMul=aYFact.GetNumerator(); nXDiv=aXFact.GetDenominator(); nYDiv=aYFact.GetDenominator(); if (bEcke) { // Eckpunkthandles FASTBOOL bUseX=(aXFactGetKind(); if(eHdl==HDL_UPLFT || eHdl==HDL_UPPER || eHdl==HDL_UPRGT || eHdl==HDL_LEFT || eHdl==HDL_RIGHT || eHdl==HDL_LWLFT || eHdl==HDL_LOWER || eHdl==HDL_LWRGT) { return true; } return false; } bool SdrObject::applySpecialDrag(SdrDragStat& rDrag) { Rectangle aNewRect(ImpDragCalcRect(rDrag)); if(aNewRect != GetSnapRect()) { NbcSetSnapRect(aNewRect); } return true; } String SdrObject::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const { return String(); } basegfx::B2DPolyPolygon SdrObject::getSpecialDragPoly(const SdrDragStat& /*rDrag*/) const { // default has nothing to add return basegfx::B2DPolyPolygon(); } //////////////////////////////////////////////////////////////////////////////////////////////////// // Create FASTBOOL SdrObject::BegCreate(SdrDragStat& rStat) { rStat.SetOrtho4Possible(); Rectangle aRect1(rStat.GetStart(), rStat.GetNow()); aRect1.Justify(); rStat.SetActionRect(aRect1); aOutRect = aRect1; return sal_True; } FASTBOOL SdrObject::MovCreate(SdrDragStat& rStat) { rStat.TakeCreateRect(aOutRect); rStat.SetActionRect(aOutRect); aOutRect.Justify(); // #i101648# for naked (non-derived) SdrObjects, do not invalidate aOutRect // by calling SetBoundRectDirty(); aOutRect IS the geometry for such objects. // No derivation implementation calls the parent implementation, so this will // cause no further prolems // // SetBoundRectDirty(); // bSnapRectDirty=sal_True; return sal_True; } FASTBOOL SdrObject::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) { rStat.TakeCreateRect(aOutRect); aOutRect.Justify(); // #i101648# see description at MovCreate // // SetRectsDirty(); return (eCmd==SDRCREATE_FORCEEND || rStat.GetPointAnz()>=2); } void SdrObject::BrkCreate(SdrDragStat& /*rStat*/) { } FASTBOOL SdrObject::BckCreate(SdrDragStat& /*rStat*/) { return sal_False; } basegfx::B2DPolyPolygon SdrObject::TakeCreatePoly(const SdrDragStat& rDrag) const { Rectangle aRect1; rDrag.TakeCreateRect(aRect1); aRect1.Justify(); basegfx::B2DPolyPolygon aRetval; const basegfx::B2DRange aRange(aRect1.Left(), aRect1.Top(), aRect1.Right(), aRect1.Bottom()); aRetval.append(basegfx::tools::createPolygonFromRect(aRange)); return aRetval; } Pointer SdrObject::GetCreatePointer() const { return Pointer(POINTER_CROSS); } // Transformationen void SdrObject::NbcMove(const Size& rSiz) { MoveRect(aOutRect,rSiz); SetRectsDirty(); } void SdrObject::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) { FASTBOOL bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); FASTBOOL bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); if (bXMirr || bYMirr) { Point aRef1(GetSnapRect().Center()); if (bXMirr) { Point aRef2(aRef1); aRef2.Y()++; NbcMirrorGluePoints(aRef1,aRef2); } if (bYMirr) { Point aRef2(aRef1); aRef2.X()++; NbcMirrorGluePoints(aRef1,aRef2); } } ResizeRect(aOutRect,rRef,xFact,yFact); SetRectsDirty(); } void SdrObject::NbcRotate(const Point& rRef, long nWink, double sn, double cs) { SetGlueReallyAbsolute(sal_True); aOutRect.Move(-rRef.X(),-rRef.Y()); Rectangle R(aOutRect); if (sn==1.0 && cs==0.0) { // 90deg aOutRect.Left() =-R.Bottom(); aOutRect.Right() =-R.Top(); aOutRect.Top() =R.Left(); aOutRect.Bottom()=R.Right(); } else if (sn==0.0 && cs==-1.0) { // 180deg aOutRect.Left() =-R.Right(); aOutRect.Right() =-R.Left(); aOutRect.Top() =-R.Bottom(); aOutRect.Bottom()=-R.Top(); } else if (sn==-1.0 && cs==0.0) { // 270deg aOutRect.Left() =R.Top(); aOutRect.Right() =R.Bottom(); aOutRect.Top() =-R.Right(); aOutRect.Bottom()=-R.Left(); } aOutRect.Move(rRef.X(),rRef.Y()); aOutRect.Justify(); // Sicherheitshalber SetRectsDirty(); NbcRotateGluePoints(rRef,nWink,sn,cs); SetGlueReallyAbsolute(sal_False); } void SdrObject::NbcMirror(const Point& rRef1, const Point& rRef2) { SetGlueReallyAbsolute(sal_True); aOutRect.Move(-rRef1.X(),-rRef1.Y()); Rectangle R(aOutRect); long dx=rRef2.X()-rRef1.X(); long dy=rRef2.Y()-rRef1.Y(); if (dx==0) { // Vertikale Achse aOutRect.Left() =-R.Right(); aOutRect.Right()=-R.Left(); } else if (dy==0) { // Horizontale Achse aOutRect.Top() =-R.Bottom(); aOutRect.Bottom()=-R.Top(); } else if (dx==dy) { /* 45 Grad Achse \ */ aOutRect.Left() =R.Top(); aOutRect.Right() =R.Bottom(); aOutRect.Top() =R.Left(); aOutRect.Bottom()=R.Right(); } else if (dx==-dy) { // 45 Grad Achse / aOutRect.Left() =-R.Bottom(); aOutRect.Right() =-R.Top(); aOutRect.Top() =-R.Right(); aOutRect.Bottom()=-R.Left(); } aOutRect.Move(rRef1.X(),rRef1.Y()); aOutRect.Justify(); // Sicherheitshalber SetRectsDirty(); NbcMirrorGluePoints(rRef1,rRef2); SetGlueReallyAbsolute(sal_False); } void SdrObject::NbcShear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear) { SetGlueReallyAbsolute(sal_True); NbcShearGluePoints(rRef,nWink,tn,bVShear); SetGlueReallyAbsolute(sal_False); } void SdrObject::Move(const Size& rSiz) { if (rSiz.Width()!=0 || rSiz.Height()!=0) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcMove(rSiz); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } void SdrObject::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) { if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcResize(rRef,xFact,yFact); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObject::Rotate(const Point& rRef, long nWink, double sn, double cs) { if (nWink!=0) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcRotate(rRef,nWink,sn,cs); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObject::Mirror(const Point& rRef1, const Point& rRef2) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcMirror(rRef1,rRef2); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObject::Shear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear) { if (nWink!=0) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcShear(rRef,nWink,tn,bVShear); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObject::NbcSetRelativePos(const Point& rPnt) { Point aRelPos0(GetSnapRect().TopLeft()-aAnchor); Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); NbcMove(aSiz); // Der ruft auch das SetRectsDirty() } void SdrObject::SetRelativePos(const Point& rPnt) { if (rPnt!=GetRelativePos()) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetRelativePos(rPnt); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } Point SdrObject::GetRelativePos() const { return GetSnapRect().TopLeft()-aAnchor; } void SdrObject::NbcSetAnchorPos(const Point& rPnt) { Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y()); aAnchor=rPnt; NbcMove(aSiz); // Der ruft auch das SetRectsDirty() } void SdrObject::SetAnchorPos(const Point& rPnt) { if (rPnt!=aAnchor) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetAnchorPos(rPnt); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } const Point& SdrObject::GetAnchorPos() const { return aAnchor; } void SdrObject::RecalcSnapRect() { } const Rectangle& SdrObject::GetSnapRect() const { return aOutRect; } void SdrObject::NbcSetSnapRect(const Rectangle& rRect) { aOutRect=rRect; } const Rectangle& SdrObject::GetLogicRect() const { return GetSnapRect(); } void SdrObject::NbcSetLogicRect(const Rectangle& rRect) { NbcSetSnapRect(rRect); } void SdrObject::AdjustToMaxRect( const Rectangle& rMaxRect, bool /* bShrinkOnly = false */ ) { SetLogicRect( rMaxRect ); } void SdrObject::SetSnapRect(const Rectangle& rRect) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetSnapRect(rRect); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObject::SetLogicRect(const Rectangle& rRect) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetLogicRect(rRect); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } long SdrObject::GetRotateAngle() const { return 0; } long SdrObject::GetShearAngle(FASTBOOL /*bVertical*/) const { return 0; } sal_uInt32 SdrObject::GetSnapPointCount() const { return GetPointCount(); } Point SdrObject::GetSnapPoint(sal_uInt32 i) const { return GetPoint(i); } sal_Bool SdrObject::IsPolyObj() const { return sal_False; } sal_uInt32 SdrObject::GetPointCount() const { return 0L; } Point SdrObject::GetPoint(sal_uInt32 /*i*/) const { return Point(); } void SdrObject::SetPoint(const Point& rPnt, sal_uInt32 i) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetPoint(rPnt, i); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObject::NbcSetPoint(const Point& /*rPnt*/, sal_uInt32 /*i*/) { } FASTBOOL SdrObject::HasTextEdit() const { return sal_False; } sal_Bool SdrObject::BegTextEdit(SdrOutliner& /*rOutl*/) { return sal_False; } void SdrObject::EndTextEdit(SdrOutliner& /*rOutl*/) { } void SdrObject::SetOutlinerParaObject(OutlinerParaObject* pTextObject) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetOutlinerParaObject(pTextObject); SetChanged(); BroadcastObjectChange(); if (GetCurrentBoundRect()!=aBoundRect0) { SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObject::NbcSetOutlinerParaObject(OutlinerParaObject* /*pTextObject*/) { } OutlinerParaObject* SdrObject::GetOutlinerParaObject() const { return NULL; } void SdrObject::NbcReformatText() { } void SdrObject::ReformatText() { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); NbcReformatText(); SetChanged(); BroadcastObjectChange(); if (GetCurrentBoundRect()!=aBoundRect0) { SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } } void SdrObject::BurnInStyleSheetAttributes() { GetProperties().ForceStyleToHardAttributes(); } #define Imp2ndKennung (0x434F4D43) SdrObjUserData* SdrObject::ImpGetMacroUserData() const { SdrObjUserData* pData=NULL; sal_uInt16 nAnz=GetUserDataCount(); for (sal_uInt16 nNum=nAnz; nNum>0 && pData==NULL;) { nNum--; pData=GetUserData(nNum); if (!pData->HasMacro(this)) pData=NULL; } return pData; } FASTBOOL SdrObject::HasMacro() const { SdrObjUserData* pData=ImpGetMacroUserData(); return pData!=NULL ? pData->HasMacro(this) : sal_False; } SdrObject* SdrObject::CheckMacroHit(const SdrObjMacroHitRec& rRec) const { SdrObjUserData* pData = ImpGetMacroUserData(); if(pData) { return pData->CheckMacroHit(rRec, this); } if(rRec.pPageView) { return SdrObjectPrimitiveHit(*this, rRec.aPos, rRec.nTol, *rRec.pPageView, rRec.pVisiLayer, false); } return 0; } Pointer SdrObject::GetMacroPointer(const SdrObjMacroHitRec& rRec) const { SdrObjUserData* pData=ImpGetMacroUserData(); if (pData!=NULL) { return pData->GetMacroPointer(rRec,this); } return Pointer(POINTER_REFHAND); } void SdrObject::PaintMacro(OutputDevice& rOut, const Rectangle& rDirtyRect, const SdrObjMacroHitRec& rRec) const { SdrObjUserData* pData=ImpGetMacroUserData(); if(pData) { pData->PaintMacro(rOut,rDirtyRect,rRec,this); } else { const RasterOp eRop(rOut.GetRasterOp()); const basegfx::B2DPolyPolygon aPolyPolygon(TakeXorPoly()); const sal_uInt32 nCount(aPolyPolygon.count()); rOut.SetLineColor(COL_BLACK); rOut.SetFillColor(); rOut.SetRasterOp(ROP_INVERT); for(sal_uInt32 a(0); a < nCount; a++) { rOut.DrawPolyLine(aPolyPolygon.getB2DPolygon(a)); } rOut.SetRasterOp(eRop); } } FASTBOOL SdrObject::DoMacro(const SdrObjMacroHitRec& rRec) { SdrObjUserData* pData=ImpGetMacroUserData(); if (pData!=NULL) { return pData->DoMacro(rRec,this); } return sal_False; } XubString SdrObject::GetMacroPopupComment(const SdrObjMacroHitRec& rRec) const { SdrObjUserData* pData=ImpGetMacroUserData(); if (pData!=NULL) { return pData->GetMacroPopupComment(rRec,this); } return String(); } //////////////////////////////////////////////////////////////////////////////////////////////////// SdrObjGeoData* SdrObject::NewGeoData() const { return new SdrObjGeoData; } void SdrObject::SaveGeoData(SdrObjGeoData& rGeo) const { rGeo.aBoundRect =GetCurrentBoundRect(); rGeo.aAnchor =aAnchor ; rGeo.bMovProt =bMovProt ; rGeo.bSizProt =bSizProt ; rGeo.bNoPrint =bNoPrint ; rGeo.mbVisible =mbVisible ; rGeo.bClosedObj =bClosedObj ; rGeo.mnLayerID = mnLayerID; // Benutzerdefinierte Klebepunkte if (pPlusData!=NULL && pPlusData->pGluePoints!=NULL) { if (rGeo.pGPL!=NULL) { *rGeo.pGPL=*pPlusData->pGluePoints; } else { rGeo.pGPL=new SdrGluePointList(*pPlusData->pGluePoints); } } else { if (rGeo.pGPL!=NULL) { delete rGeo.pGPL; rGeo.pGPL=NULL; } } } void SdrObject::RestGeoData(const SdrObjGeoData& rGeo) { SetRectsDirty(); aOutRect =rGeo.aBoundRect ; aAnchor =rGeo.aAnchor ; bMovProt =rGeo.bMovProt ; bSizProt =rGeo.bSizProt ; bNoPrint =rGeo.bNoPrint ; mbVisible =rGeo.mbVisible ; bClosedObj =rGeo.bClosedObj ; mnLayerID = rGeo.mnLayerID; // Benutzerdefinierte Klebepunkte if (rGeo.pGPL!=NULL) { ImpForcePlusData(); if (pPlusData->pGluePoints!=NULL) { *pPlusData->pGluePoints=*rGeo.pGPL; } else { pPlusData->pGluePoints=new SdrGluePointList(*rGeo.pGPL); } } else { if (pPlusData!=NULL && pPlusData->pGluePoints!=NULL) { delete pPlusData->pGluePoints; pPlusData->pGluePoints=NULL; } } } SdrObjGeoData* SdrObject::GetGeoData() const { SdrObjGeoData* pGeo=NewGeoData(); SaveGeoData(*pGeo); return pGeo; } void SdrObject::SetGeoData(const SdrObjGeoData& rGeo) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); RestGeoData(rGeo); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } //////////////////////////////////////////////////////////////////////////////////////////////////// // ItemSet access const SfxItemSet& SdrObject::GetObjectItemSet() const { return GetProperties().GetObjectItemSet(); } const SfxItemSet& SdrObject::GetMergedItemSet() const { return GetProperties().GetMergedItemSet(); } void SdrObject::SetObjectItem(const SfxPoolItem& rItem) { GetProperties().SetObjectItem(rItem); } void SdrObject::SetMergedItem(const SfxPoolItem& rItem) { GetProperties().SetMergedItem(rItem); } void SdrObject::ClearObjectItem(const sal_uInt16 nWhich) { GetProperties().ClearObjectItem(nWhich); } void SdrObject::ClearMergedItem(const sal_uInt16 nWhich) { GetProperties().ClearMergedItem(nWhich); } void SdrObject::SetObjectItemSet(const SfxItemSet& rSet) { GetProperties().SetObjectItemSet(rSet); } void SdrObject::SetMergedItemSet(const SfxItemSet& rSet, sal_Bool bClearAllItems) { GetProperties().SetMergedItemSet(rSet, bClearAllItems); } const SfxPoolItem& SdrObject::GetObjectItem(const sal_uInt16 nWhich) const { return GetObjectItemSet().Get(nWhich); } SfxMapUnit SdrObject::GetObjectMapUnit() const { SfxMapUnit aRetval(SFX_MAPUNIT_100TH_MM); SdrItemPool* pPool = GetObjectItemPool(); if(pPool) { aRetval = pPool->GetMetric(0); } else { OSL_ENSURE(pPool, "SdrObjects always need a pool (!)"); } return aRetval; } const SfxPoolItem& SdrObject::GetMergedItem(const sal_uInt16 nWhich) const { return GetMergedItemSet().Get(nWhich); } void SdrObject::SetMergedItemSetAndBroadcast(const SfxItemSet& rSet, sal_Bool bClearAllItems) { GetProperties().SetMergedItemSetAndBroadcast(rSet, bClearAllItems); } void SdrObject::ApplyNotPersistAttr(const SfxItemSet& rAttr) { Rectangle aBoundRect0; if (pUserCall!=NULL) aBoundRect0=GetLastBoundRect(); NbcApplyNotPersistAttr(rAttr); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObject::NbcApplyNotPersistAttr(const SfxItemSet& rAttr) { const Rectangle& rSnap=GetSnapRect(); const Rectangle& rLogic=GetLogicRect(); Point aRef1(rSnap.Center()); Point aRef2(aRef1); aRef2.Y()++; const SfxPoolItem *pPoolItem=NULL; if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1X,sal_True,&pPoolItem)==SFX_ITEM_SET) { aRef1.X()=((const SdrTransformRef1XItem*)pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1Y,sal_True,&pPoolItem)==SFX_ITEM_SET) { aRef1.Y()=((const SdrTransformRef1YItem*)pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_TRANSFORMREF2X,sal_True,&pPoolItem)==SFX_ITEM_SET) { aRef2.X()=((const SdrTransformRef2XItem*)pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_TRANSFORMREF2Y,sal_True,&pPoolItem)==SFX_ITEM_SET) { aRef2.Y()=((const SdrTransformRef2YItem*)pPoolItem)->GetValue(); } Rectangle aNewSnap(rSnap); if (rAttr.GetItemState(SDRATTR_MOVEX,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrMoveXItem*)pPoolItem)->GetValue(); aNewSnap.Move(n,0); } if (rAttr.GetItemState(SDRATTR_MOVEY,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrMoveYItem*)pPoolItem)->GetValue(); aNewSnap.Move(0,n); } if (rAttr.GetItemState(SDRATTR_ONEPOSITIONX,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrOnePositionXItem*)pPoolItem)->GetValue(); aNewSnap.Move(n-aNewSnap.Left(),0); } if (rAttr.GetItemState(SDRATTR_ONEPOSITIONY,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrOnePositionYItem*)pPoolItem)->GetValue(); aNewSnap.Move(0,n-aNewSnap.Top()); } if (rAttr.GetItemState(SDRATTR_ONESIZEWIDTH,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrOneSizeWidthItem*)pPoolItem)->GetValue(); aNewSnap.Right()=aNewSnap.Left()+n; } if (rAttr.GetItemState(SDRATTR_ONESIZEHEIGHT,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrOneSizeHeightItem*)pPoolItem)->GetValue(); aNewSnap.Bottom()=aNewSnap.Top()+n; } if (aNewSnap!=rSnap) { if (aNewSnap.GetSize()==rSnap.GetSize()) { NbcMove(Size(aNewSnap.Left()-rSnap.Left(),aNewSnap.Top()-rSnap.Top())); } else { NbcSetSnapRect(aNewSnap); } } if (rAttr.GetItemState(SDRATTR_SHEARANGLE,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrShearAngleItem*)pPoolItem)->GetValue(); n-=GetShearAngle(); if (n!=0) { double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,sal_False); } } if (rAttr.GetItemState(SDRATTR_ROTATEANGLE,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrRotateAngleItem*)pPoolItem)->GetValue(); n-=GetRotateAngle(); if (n!=0) { double nSin=sin(n*nPi180); double nCos=cos(n*nPi180); NbcRotate(aRef1,n,nSin,nCos); } } if (rAttr.GetItemState(SDRATTR_ROTATEONE,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrRotateOneItem*)pPoolItem)->GetValue(); double nSin=sin(n*nPi180); double nCos=cos(n*nPi180); NbcRotate(aRef1,n,nSin,nCos); } if (rAttr.GetItemState(SDRATTR_HORZSHEARONE,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrHorzShearOneItem*)pPoolItem)->GetValue(); double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,sal_False); } if (rAttr.GetItemState(SDRATTR_VERTSHEARONE,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrVertShearOneItem*)pPoolItem)->GetValue(); double nTan=tan(n*nPi180); NbcShear(aRef1,n,nTan,sal_True); } if (rAttr.GetItemState(SDRATTR_OBJMOVEPROTECT,sal_True,&pPoolItem)==SFX_ITEM_SET) { bool b=((const SdrObjMoveProtectItem*)pPoolItem)->GetValue(); SetMoveProtect(b); } if (rAttr.GetItemState(SDRATTR_OBJSIZEPROTECT,sal_True,&pPoolItem)==SFX_ITEM_SET) { bool b=((const SdrObjSizeProtectItem*)pPoolItem)->GetValue(); SetResizeProtect(b); } /* #67368# move protect always sets size protect */ if( IsMoveProtect() ) SetResizeProtect( true ); if (rAttr.GetItemState(SDRATTR_OBJPRINTABLE,sal_True,&pPoolItem)==SFX_ITEM_SET) { bool b=((const SdrObjPrintableItem*)pPoolItem)->GetValue(); SetPrintable(b); } if (rAttr.GetItemState(SDRATTR_OBJVISIBLE,sal_True,&pPoolItem)==SFX_ITEM_SET) { bool b=((const SdrObjVisibleItem*)pPoolItem)->GetValue(); SetVisible(b); } SdrLayerID nLayer=SDRLAYER_NOTFOUND; if (rAttr.GetItemState(SDRATTR_LAYERID,sal_True,&pPoolItem)==SFX_ITEM_SET) { nLayer=((const SdrLayerIdItem*)pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_LAYERNAME,sal_True,&pPoolItem)==SFX_ITEM_SET && pModel!=NULL) { XubString aLayerName=((const SdrLayerNameItem*)pPoolItem)->GetValue(); const SdrLayerAdmin* pLayAd=pPage!=NULL ? &pPage->GetLayerAdmin() : pModel!=NULL ? &pModel->GetLayerAdmin() : NULL; if (pLayAd!=NULL) { const SdrLayer* pLayer=pLayAd->GetLayer(aLayerName, sal_True); if (pLayer!=NULL) { nLayer=pLayer->GetID(); } } } if (nLayer!=SDRLAYER_NOTFOUND) { NbcSetLayer(nLayer); } if (rAttr.GetItemState(SDRATTR_OBJECTNAME,sal_True,&pPoolItem)==SFX_ITEM_SET) { XubString aName=((const SdrObjectNameItem*)pPoolItem)->GetValue(); SetName(aName); } Rectangle aNewLogic(rLogic); if (rAttr.GetItemState(SDRATTR_LOGICSIZEWIDTH,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrLogicSizeWidthItem*)pPoolItem)->GetValue(); aNewLogic.Right()=aNewLogic.Left()+n; } if (rAttr.GetItemState(SDRATTR_LOGICSIZEHEIGHT,sal_True,&pPoolItem)==SFX_ITEM_SET) { long n=((const SdrLogicSizeHeightItem*)pPoolItem)->GetValue(); aNewLogic.Bottom()=aNewLogic.Top()+n; } if (aNewLogic!=rLogic) { NbcSetLogicRect(aNewLogic); } Fraction aResizeX(1,1); Fraction aResizeY(1,1); if (rAttr.GetItemState(SDRATTR_RESIZEXONE,sal_True,&pPoolItem)==SFX_ITEM_SET) { aResizeX*=((const SdrResizeXOneItem*)pPoolItem)->GetValue(); } if (rAttr.GetItemState(SDRATTR_RESIZEYONE,sal_True,&pPoolItem)==SFX_ITEM_SET) { aResizeY*=((const SdrResizeYOneItem*)pPoolItem)->GetValue(); } if (aResizeX!=Fraction(1,1) || aResizeY!=Fraction(1,1)) { NbcResize(aRef1,aResizeX,aResizeY); } } void lcl_SetItem(SfxItemSet& rAttr, FASTBOOL bMerge, const SfxPoolItem& rItem) { if (bMerge) rAttr.MergeValue(rItem,sal_True); else rAttr.Put(rItem); } void SdrObject::TakeNotPersistAttr(SfxItemSet& rAttr, FASTBOOL bMerge) const { const Rectangle& rSnap=GetSnapRect(); const Rectangle& rLogic=GetLogicRect(); lcl_SetItem(rAttr,bMerge,SdrObjMoveProtectItem(IsMoveProtect())); lcl_SetItem(rAttr,bMerge,SdrObjSizeProtectItem(IsResizeProtect())); lcl_SetItem(rAttr,bMerge,SdrObjPrintableItem(IsPrintable())); lcl_SetItem(rAttr,bMerge,SdrObjVisibleItem(IsVisible())); lcl_SetItem(rAttr,bMerge,SdrRotateAngleItem(GetRotateAngle())); lcl_SetItem(rAttr,bMerge,SdrShearAngleItem(GetShearAngle())); lcl_SetItem(rAttr,bMerge,SdrOneSizeWidthItem(rSnap.GetWidth()-1)); lcl_SetItem(rAttr,bMerge,SdrOneSizeHeightItem(rSnap.GetHeight()-1)); lcl_SetItem(rAttr,bMerge,SdrOnePositionXItem(rSnap.Left())); lcl_SetItem(rAttr,bMerge,SdrOnePositionYItem(rSnap.Top())); if (rLogic.GetWidth()!=rSnap.GetWidth()) { lcl_SetItem(rAttr,bMerge,SdrLogicSizeWidthItem(rLogic.GetWidth()-1)); } if (rLogic.GetHeight()!=rSnap.GetHeight()) { lcl_SetItem(rAttr,bMerge,SdrLogicSizeHeightItem(rLogic.GetHeight()-1)); } XubString aName(GetName()); if(aName.Len()) { lcl_SetItem(rAttr, bMerge, SdrObjectNameItem(aName)); } lcl_SetItem(rAttr,bMerge,SdrLayerIdItem(GetLayer())); const SdrLayerAdmin* pLayAd=pPage!=NULL ? &pPage->GetLayerAdmin() : pModel!=NULL ? &pModel->GetLayerAdmin() : NULL; if (pLayAd!=NULL) { const SdrLayer* pLayer=pLayAd->GetLayerPerID(GetLayer()); if (pLayer!=NULL) { lcl_SetItem(rAttr,bMerge,SdrLayerNameItem(pLayer->GetName())); } } Point aRef1(rSnap.Center()); Point aRef2(aRef1); aRef2.Y()++; lcl_SetItem(rAttr,bMerge,SdrTransformRef1XItem(aRef1.X())); lcl_SetItem(rAttr,bMerge,SdrTransformRef1YItem(aRef1.Y())); lcl_SetItem(rAttr,bMerge,SdrTransformRef2XItem(aRef2.X())); lcl_SetItem(rAttr,bMerge,SdrTransformRef2YItem(aRef2.Y())); } SfxStyleSheet* SdrObject::GetStyleSheet() const { return GetProperties().GetStyleSheet(); } void SdrObject::SetStyleSheet(SfxStyleSheet* pNewStyleSheet, sal_Bool bDontRemoveHardAttr) { Rectangle aBoundRect0; if(pUserCall) aBoundRect0 = GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcSetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_CHGATTR, aBoundRect0); } void SdrObject::NbcSetStyleSheet(SfxStyleSheet* pNewStyleSheet, sal_Bool bDontRemoveHardAttr) { // only allow graphic and presentation styles for shapes if( pNewStyleSheet && (pNewStyleSheet->GetFamily() == SFX_STYLE_FAMILY_PARA) && (pNewStyleSheet->GetFamily() == SFX_STYLE_FAMILY_PAGE) ) return; GetProperties().SetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr); } // Das Broadcasting beim Setzen der Attribute wird vom AttrObj gemanagt //////////////////////////////////////////////////////////////////////////////////////////////////// FASTBOOL SdrObject::IsNode() const { return sal_True; } SdrGluePoint SdrObject::GetVertexGluePoint(sal_uInt16 nPosNum) const { // #i41936# Use SnapRect for default GluePoints const Rectangle aR(GetSnapRect()); Point aPt; switch(nPosNum) { case 0 : aPt = aR.TopCenter(); break; case 1 : aPt = aR.RightCenter(); break; case 2 : aPt = aR.BottomCenter(); break; case 3 : aPt = aR.LeftCenter(); break; } aPt -= aR.Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(sal_False); return aGP; } SdrGluePoint SdrObject::GetCornerGluePoint(sal_uInt16 nPosNum) const { Rectangle aR(GetCurrentBoundRect()); Point aPt; switch (nPosNum) { case 0 : aPt=aR.TopLeft(); break; case 1 : aPt=aR.TopRight(); break; case 2 : aPt=aR.BottomRight(); break; case 3 : aPt=aR.BottomLeft(); break; } aPt-=GetSnapRect().Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(sal_False); return aGP; } const SdrGluePointList* SdrObject::GetGluePointList() const { if (pPlusData!=NULL) return pPlusData->pGluePoints; return NULL; } //SdrGluePointList* SdrObject::GetGluePointList() //{ // if (pPlusData!=NULL) return pPlusData->pGluePoints; // return NULL; //} SdrGluePointList* SdrObject::ForceGluePointList() { ImpForcePlusData(); if (pPlusData->pGluePoints==NULL) { pPlusData->pGluePoints=new SdrGluePointList; } return pPlusData->pGluePoints; } void SdrObject::SetGlueReallyAbsolute(FASTBOOL bOn) { // erst Const-Aufruf um zu sehen, ob // ueberhaupt Klebepunkte da sind // const-Aufruf erzwingen! if (GetGluePointList()!=NULL) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->SetReallyAbsolute(bOn,*this); } } void SdrObject::NbcRotateGluePoints(const Point& rRef, long nWink, double sn, double cs) { // erst Const-Aufruf um zu sehen, ob // ueberhaupt Klebepunkte da sind // const-Aufruf erzwingen! if (GetGluePointList()!=NULL) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Rotate(rRef,nWink,sn,cs,this); } } void SdrObject::NbcMirrorGluePoints(const Point& rRef1, const Point& rRef2) { // erst Const-Aufruf um zu sehen, ob // ueberhaupt Klebepunkte da sind // const-Aufruf erzwingen! if (GetGluePointList()!=NULL) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Mirror(rRef1,rRef2,this); } } void SdrObject::NbcShearGluePoints(const Point& rRef, long nWink, double tn, FASTBOOL bVShear) { // erst Const-Aufruf um zu sehen, ob // ueberhaupt Klebepunkte da sind // const-Aufruf erzwingen! if (GetGluePointList()!=NULL) { SdrGluePointList* pGPL=ForceGluePointList(); pGPL->Shear(rRef,nWink,tn,bVShear,this); } } FASTBOOL SdrObject::IsEdge() const { return sal_False; } void SdrObject::ConnectToNode(FASTBOOL /*bTail1*/, SdrObject* /*pObj*/) { } void SdrObject::DisconnectFromNode(FASTBOOL /*bTail1*/) { } SdrObject* SdrObject::GetConnectedNode(FASTBOOL /*bTail1*/) const { return NULL; } //////////////////////////////////////////////////////////////////////////////////////////////////// void extractLineContourFromPrimitive2DSequence( const drawinglayer::primitive2d::Primitive2DSequence& rxSequence, basegfx::B2DPolygonVector& rExtractedHairlines, basegfx::B2DPolyPolygonVector& rExtractedLineFills) { rExtractedHairlines.clear(); rExtractedLineFills.clear(); if(rxSequence.hasElements()) { // use neutral ViewInformation const drawinglayer::geometry::ViewInformation2D aViewInformation2D; // create extractor, process and get result drawinglayer::processor2d::LineGeometryExtractor2D aExtractor(aViewInformation2D); aExtractor.process(rxSequence); // copy line results rExtractedHairlines = aExtractor.getExtractedHairlines(); // copy fill rsults rExtractedLineFills = aExtractor.getExtractedLineFills(); } } //////////////////////////////////////////////////////////////////////////////////////////////////// SdrObject* SdrObject::ImpConvertToContourObj(SdrObject* pRet, sal_Bool bForceLineDash) const { bool bNoChange(true); if(pRet->LineGeometryUsageIsNecessary()) { basegfx::B2DPolyPolygon aMergedLineFillPolyPolygon; basegfx::B2DPolyPolygon aMergedHairlinePolyPolygon; const drawinglayer::primitive2d::Primitive2DSequence xSequence(pRet->GetViewContact().getViewIndependentPrimitive2DSequence()); if(xSequence.hasElements()) { basegfx::B2DPolygonVector aExtractedHairlines; basegfx::B2DPolyPolygonVector aExtractedLineFills; extractLineContourFromPrimitive2DSequence(xSequence, aExtractedHairlines, aExtractedLineFills); if(!aExtractedHairlines.empty()) { // for SdrObject creation, just copy all to a single Hairline-PolyPolygon for(sal_uInt32 a(0); a < aExtractedHairlines.size(); a++) { aMergedHairlinePolyPolygon.append(aExtractedHairlines[a]); } } // check for fill rsults if(!aExtractedLineFills.empty()) { // merge to a single PolyPolygon (OR) aMergedLineFillPolyPolygon = basegfx::tools::mergeToSinglePolyPolygon(aExtractedLineFills); } } if(aMergedLineFillPolyPolygon.count() || (bForceLineDash && aMergedHairlinePolyPolygon.count())) { SfxItemSet aSet(pRet->GetMergedItemSet()); XFillStyle eOldFillStyle = ((const XFillStyleItem&)(aSet.Get(XATTR_FILLSTYLE))).GetValue(); SdrPathObj* aLinePolygonPart = NULL; SdrPathObj* aLineHairlinePart = NULL; bool bBuildGroup(false); if(aMergedLineFillPolyPolygon.count()) { // create SdrObject for filled line geometry aLinePolygonPart = new SdrPathObj(OBJ_PATHFILL, aMergedLineFillPolyPolygon); aLinePolygonPart->SetModel(pRet->GetModel()); // correct item properties aSet.Put(XLineWidthItem(0L)); aSet.Put(XLineStyleItem(XLINE_NONE)); Color aColorLine = ((const XLineColorItem&)(aSet.Get(XATTR_LINECOLOR))).GetColorValue(); sal_uInt16 nTransLine = ((const XLineTransparenceItem&)(aSet.Get(XATTR_LINETRANSPARENCE))).GetValue(); aSet.Put(XFillColorItem(XubString(), aColorLine)); aSet.Put(XFillStyleItem(XFILL_SOLID)); aSet.Put(XFillTransparenceItem(nTransLine)); aLinePolygonPart->SetMergedItemSet(aSet); } if(aMergedHairlinePolyPolygon.count()) { // create SdrObject for hairline geometry // OBJ_PATHLINE is necessary here, not OBJ_PATHFILL. This is intended // to get a non-filled object. If the poly is closed, the PathObj takes care for // the correct closed state. aLineHairlinePart = new SdrPathObj(OBJ_PATHLINE, aMergedHairlinePolyPolygon); aLineHairlinePart->SetModel(pRet->GetModel()); aSet.Put(XLineWidthItem(0L)); aSet.Put(XFillStyleItem(XFILL_NONE)); aSet.Put(XLineStyleItem(XLINE_SOLID)); // it is also necessary to switch off line start and ends here aSet.Put(XLineStartWidthItem(0)); aSet.Put(XLineEndWidthItem(0)); aLineHairlinePart->SetMergedItemSet(aSet); if(aLinePolygonPart) { bBuildGroup = true; } } // check if original geometry should be added (e.g. filled and closed) bool bAddOriginalGeometry(false); SdrPathObj* pPath = PTR_CAST(SdrPathObj, pRet); if(pPath && pPath->IsClosed()) { if(eOldFillStyle != XFILL_NONE) { // #107600# use new boolean here bAddOriginalGeometry = true; } } // do we need a group? if(bBuildGroup || bAddOriginalGeometry) { SdrObject* pGroup = new SdrObjGroup; pGroup->SetModel(pRet->GetModel()); if(bAddOriginalGeometry) { // Add a clone of the original geometry. aSet.ClearItem(); aSet.Put(pRet->GetMergedItemSet()); aSet.Put(XLineStyleItem(XLINE_NONE)); aSet.Put(XLineWidthItem(0L)); SdrObject* pClone = pRet->Clone(); pClone->SetModel(pRet->GetModel()); pClone->SetMergedItemSet(aSet); pGroup->GetSubList()->NbcInsertObject(pClone); } if(aLinePolygonPart) { pGroup->GetSubList()->NbcInsertObject(aLinePolygonPart); } if(aLineHairlinePart) { pGroup->GetSubList()->NbcInsertObject(aLineHairlinePart); } pRet = pGroup; // be more careful with the state describing bool bNoChange = false; } else { if(aLinePolygonPart) { pRet = aLinePolygonPart; // be more careful with the state describing bool bNoChange = false; } else if(aLineHairlinePart) { pRet = aLineHairlinePart; // be more careful with the state describing bool bNoChange = false; } } } } if(bNoChange) { // due to current method usage, create and return a clone when nothing has changed SdrObject* pClone = pRet->Clone(); pClone->SetModel(pRet->GetModel()); pRet = pClone; } return pRet; } // convert this path object to contour object, even when it is a group SdrObject* SdrObject::ConvertToContourObj(SdrObject* pRet, sal_Bool bForceLineDash) const { if(pRet->ISA(SdrObjGroup)) { SdrObjList* pObjList2 = pRet->GetSubList(); SdrObject* pGroup = new SdrObjGroup; pGroup->SetModel(pRet->GetModel()); for(sal_uInt32 a=0;aGetObjCount();a++) { SdrObject* pIterObj = pObjList2->GetObj(a); pGroup->GetSubList()->NbcInsertObject(ConvertToContourObj(pIterObj, bForceLineDash)); } pRet = pGroup; } else { if(pRet && pRet->ISA(SdrPathObj)) { SdrPathObj* pPathObj = (SdrPathObj*)pRet; // bezier geometry got created, even for straight edges since the given // object is a result of DoConvertToPolyObj. For conversion to contour // this is not really needed and can be reduced again AFAP pPathObj->SetPathPoly(basegfx::tools::simplifyCurveSegments(pPathObj->GetPathPoly())); } pRet = ImpConvertToContourObj(pRet, bForceLineDash); } // #i73441# preserve LayerID if(pRet && pRet->GetLayer() != GetLayer()) { pRet->SetLayer(GetLayer()); } return pRet; } //////////////////////////////////////////////////////////////////////////////////////////////////// SdrObject* SdrObject::ConvertToPolyObj(sal_Bool bBezier, sal_Bool bLineToArea) const { SdrObject* pRet = DoConvertToPolyObj(bBezier, true); if(pRet && bLineToArea) { SdrObject* pNewRet = ConvertToContourObj(pRet); delete pRet; pRet = pNewRet; } // #i73441# preserve LayerID if(pRet && pRet->GetLayer() != GetLayer()) { pRet->SetLayer(GetLayer()); } return pRet; } //////////////////////////////////////////////////////////////////////////////////////////////////// SdrObject* SdrObject::DoConvertToPolyObj(sal_Bool /*bBezier*/, bool /*bAddText*/) const { return NULL; } //////////////////////////////////////////////////////////////////////////////////////////////////// void SdrObject::SetInserted(sal_Bool bIns) { if (bIns!=IsInserted()) { bInserted=bIns; Rectangle aBoundRect0(GetLastBoundRect()); if (bIns) SendUserCall(SDRUSERCALL_INSERTED,aBoundRect0); else SendUserCall(SDRUSERCALL_REMOVED,aBoundRect0); if (pPlusData!=NULL && pPlusData->pBroadcast!=NULL) { // #42522# SdrHint aHint(*this); aHint.SetKind(bIns?HINT_OBJINSERTED:HINT_OBJREMOVED); pPlusData->pBroadcast->Broadcast(aHint); } } } void SdrObject::SetMoveProtect(sal_Bool bProt) { if(IsMoveProtect() != bProt) { // #i77187# secured and simplified bMovProt = bProt; SetChanged(); BroadcastObjectChange(); } } void SdrObject::SetResizeProtect(sal_Bool bProt) { if(IsResizeProtect() != bProt) { // #i77187# secured and simplified bSizProt = bProt; SetChanged(); BroadcastObjectChange(); } } void SdrObject::SetPrintable(sal_Bool bPrn) { if( bPrn == bNoPrint ) { bNoPrint=!bPrn; SetChanged(); if (IsInserted() && pModel!=NULL) { SdrHint aHint(*this); pModel->Broadcast(aHint); } } } void SdrObject::SetVisible(sal_Bool bVisible) { if( bVisible != mbVisible ) { mbVisible = bVisible; SetChanged(); if (IsInserted() && pModel!=NULL) { SdrHint aHint(*this); pModel->Broadcast(aHint); } } } //////////////////////////////////////////////////////////////////////////////////////////////////// sal_uInt16 SdrObject::GetUserDataCount() const { if (pPlusData==NULL || pPlusData->pUserDataList==NULL) return 0; return pPlusData->pUserDataList->GetUserDataCount(); } SdrObjUserData* SdrObject::GetUserData(sal_uInt16 nNum) const { if (pPlusData==NULL || pPlusData->pUserDataList==NULL) return NULL; return pPlusData->pUserDataList->GetUserData(nNum); } void SdrObject::InsertUserData(SdrObjUserData* pData, sal_uInt16 nPos) { if (pData!=NULL) { ImpForcePlusData(); if (pPlusData->pUserDataList==NULL) pPlusData->pUserDataList=new SdrObjUserDataList; pPlusData->pUserDataList->InsertUserData(pData,nPos); } else { DBG_ERROR("SdrObject::InsertUserData(): pData ist NULL-Pointer"); } } void SdrObject::DeleteUserData(sal_uInt16 nNum) { sal_uInt16 nAnz=GetUserDataCount(); if (nNumpUserDataList->DeleteUserData(nNum); if (nAnz==1) { delete pPlusData->pUserDataList; pPlusData->pUserDataList=NULL; } } else { DBG_ERROR("SdrObject::DeleteUserData(): ungueltiger Index"); } } void SdrObject::SendUserCall(SdrUserCallType eUserCall, const Rectangle& rBoundRect) const { SdrObjGroup* pGroup = NULL; if( pObjList && pObjList->GetListKind() == SDROBJLIST_GROUPOBJ ) pGroup = (SdrObjGroup*) pObjList->GetOwnerObj(); if ( pUserCall ) { // UserCall ausfuehren pUserCall->Changed( *this, eUserCall, rBoundRect ); } while( pGroup ) { // Gruppe benachrichtigen if( pGroup->GetUserCall() ) { SdrUserCallType eChildUserType = SDRUSERCALL_CHILD_CHGATTR; switch( eUserCall ) { case SDRUSERCALL_MOVEONLY: eChildUserType = SDRUSERCALL_CHILD_MOVEONLY; break; case SDRUSERCALL_RESIZE: eChildUserType = SDRUSERCALL_CHILD_RESIZE; break; case SDRUSERCALL_CHGATTR: eChildUserType = SDRUSERCALL_CHILD_CHGATTR; break; case SDRUSERCALL_DELETE: eChildUserType = SDRUSERCALL_CHILD_DELETE; break; case SDRUSERCALL_COPY: eChildUserType = SDRUSERCALL_CHILD_COPY; break; case SDRUSERCALL_INSERTED: eChildUserType = SDRUSERCALL_CHILD_INSERTED; break; case SDRUSERCALL_REMOVED: eChildUserType = SDRUSERCALL_CHILD_REMOVED; break; default: break; } pGroup->GetUserCall()->Changed( *this, eChildUserType, rBoundRect ); } if( pGroup->GetObjList() && pGroup->GetObjList()->GetListKind() == SDROBJLIST_GROUPOBJ && pGroup != (SdrObjGroup*) pObjList->GetOwnerObj() ) pGroup = (SdrObjGroup*) pObjList->GetOwnerObj(); else pGroup = NULL; } // notify our UNO shape listeners switch ( eUserCall ) { case SDRUSERCALL_RESIZE: notifyShapePropertyChange( ::svx::eShapeSize ); // fall through - RESIZE might also imply a change of the position case SDRUSERCALL_MOVEONLY: notifyShapePropertyChange( ::svx::eShapePosition ); break; default: // not interested in break; } } // ItemPool fuer dieses Objekt wechseln void SdrObject::MigrateItemPool(SfxItemPool* pSrcPool, SfxItemPool* pDestPool, SdrModel* pNewModel) { if(pSrcPool && pDestPool && (pSrcPool != pDestPool)) { GetProperties().MoveToItemPool(pSrcPool, pDestPool, pNewModel); } } sal_Bool SdrObject::IsTransparent( sal_Bool /*bCheckForAlphaChannel*/) const { bool bRet = false; if( IsGroupObject() ) { SdrObjListIter aIter( *GetSubList(), IM_DEEPNOGROUPS ); for( SdrObject* pO = aIter.Next(); pO && !bRet; pO = aIter.Next() ) { const SfxItemSet& rAttr = pO->GetMergedItemSet(); if( ( ( (const XFillTransparenceItem&) rAttr.Get( XATTR_FILLTRANSPARENCE ) ).GetValue() || ( (const XLineTransparenceItem&) rAttr.Get( XATTR_LINETRANSPARENCE ) ).GetValue() ) || ( ( rAttr.GetItemState( XATTR_FILLFLOATTRANSPARENCE ) == SFX_ITEM_SET ) && ( (const XFillFloatTransparenceItem&) rAttr.Get( XATTR_FILLFLOATTRANSPARENCE ) ).IsEnabled() ) ) { bRet = sal_True; } else if( pO->ISA( SdrGrafObj ) ) { SdrGrafObj* pGrafObj = (SdrGrafObj*) pO; if( ( (const SdrGrafTransparenceItem&) rAttr.Get( SDRATTR_GRAFTRANSPARENCE ) ).GetValue() || ( pGrafObj->GetGraphicType() == GRAPHIC_BITMAP && pGrafObj->GetGraphic().GetBitmapEx().IsAlpha() ) ) { bRet = sal_True; } } } } else { const SfxItemSet& rAttr = GetMergedItemSet(); if( ( ( (const XFillTransparenceItem&) rAttr.Get( XATTR_FILLTRANSPARENCE ) ).GetValue() || ( (const XLineTransparenceItem&) rAttr.Get( XATTR_LINETRANSPARENCE ) ).GetValue() ) || ( ( rAttr.GetItemState( XATTR_FILLFLOATTRANSPARENCE ) == SFX_ITEM_SET ) && ( (const XFillFloatTransparenceItem&) rAttr.Get( XATTR_FILLFLOATTRANSPARENCE ) ).IsEnabled() ) ) { bRet = sal_True; } else if( ISA( SdrGrafObj ) ) { SdrGrafObj* pGrafObj = (SdrGrafObj*) this; // #i25616# bRet = pGrafObj->IsObjectTransparent(); } } return bRet; } void SdrObject::impl_setUnoShape( const uno::Reference< uno::XInterface >& _rxUnoShape ) { maWeakUnoShape = _rxUnoShape; mpSvxShape = SvxShape::getImplementation( _rxUnoShape ); // OSL_ENSURE( mpSvxShape || !_rxUnoShape.is(), // "SdrObject::setUnoShape: not sure it's a good idea to have an XShape which is not implemented by SvxShape ..." ); } /** only for internal use! */ SvxShape* SdrObject::getSvxShape() { DBG_TESTSOLARMUTEX(); // retrieving the impl pointer and subsequently using it is not thread-safe, of course, so it needs to be // guarded by the SolarMutex uno::Reference< uno::XInterface > xShape( maWeakUnoShape ); #if OSL_DEBUG_LEVE > 0 OSL_ENSURE( !( !xShape.is() && mpSvxShape ), "SdrObject::getSvxShape: still having IMPL-Pointer to dead object!" ); #endif //#113608#, make sure mpSvxShape is always synchronized with maWeakUnoShape if ( mpSvxShape && !xShape.is() ) mpSvxShape = NULL; return mpSvxShape; } ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > SdrObject::getUnoShape() { // try weak reference first uno::Reference< uno::XInterface > xShape( getWeakUnoShape() ); if( !xShape.is() ) { OSL_ENSURE( mpSvxShape == NULL, "SdrObject::getUnoShape: XShape already dead, but still an IMPL pointer!" ); if ( pPage ) { uno::Reference< uno::XInterface > xPage( pPage->getUnoPage() ); if( xPage.is() ) { SvxDrawPage* pDrawPage = SvxDrawPage::getImplementation(xPage); if( pDrawPage ) { // create one xShape = pDrawPage->_CreateShape( this ); impl_setUnoShape( xShape ); } } } else { mpSvxShape = SvxDrawPage::CreateShapeByTypeAndInventor( GetObjIdentifier(), GetObjInventor(), this, NULL ); maWeakUnoShape = xShape = static_cast< ::cppu::OWeakObject* >( mpSvxShape ); } } return xShape; } ::svx::PropertyChangeNotifier& SdrObject::getShapePropertyChangeNotifier() { DBG_TESTSOLARMUTEX(); SvxShape* pSvxShape = getSvxShape(); ENSURE_OR_THROW( pSvxShape, "no SvxShape, yet!" ); return pSvxShape->getShapePropertyChangeNotifier(); } void SdrObject::notifyShapePropertyChange( const ::svx::ShapeProperty _eProperty ) const { DBG_TESTSOLARMUTEX(); SvxShape* pSvxShape = const_cast< SdrObject* >( this )->getSvxShape(); if ( pSvxShape ) return pSvxShape->getShapePropertyChangeNotifier().notifyPropertyChange( _eProperty ); } //////////////////////////////////////////////////////////////////////////////////////////////////// // // transformation interface for StarOfficeAPI. This implements support for // homogen 3x3 matrices containing the transformation of the SdrObject. At the // moment it contains a shearX, rotation and translation, but for setting all linear // transforms like Scale, ShearX, ShearY, Rotate and Translate are supported. // //////////////////////////////////////////////////////////////////////////////////////////////////// // gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon // with the base geometry and returns TRUE. Otherwise it returns FALSE. sal_Bool SdrObject::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const { // any kind of SdrObject, just use SnapRect Rectangle aRectangle(GetSnapRect()); // convert to transformation values basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight()); basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top()); // position maybe relative to anchorpos, convert if( pModel && pModel->IsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // force MapUnit to 100th mm const SfxMapUnit eMapUnit(GetObjectMapUnit()); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // position aTranslate.setX(ImplTwipsToMM(aTranslate.getX())); aTranslate.setY(ImplTwipsToMM(aTranslate.getY())); // size aScale.setX(ImplTwipsToMM(aScale.getX())); aScale.setY(ImplTwipsToMM(aScale.getY())); break; } default: { DBG_ERROR("TRGetBaseGeometry: Missing unit translation to 100th mm!"); } } } // build matrix rMatrix = basegfx::tools::createScaleTranslateB2DHomMatrix(aScale, aTranslate); return sal_False; } // sets the base geometry of the object using infos contained in the homogen 3x3 matrix. // If it's an SdrPathObj it will use the provided geometry information. The Polygon has // to use (0,0) as upper left and will be scaled to the given size in the matrix. void SdrObject::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/) { // break up matrix basegfx::B2DTuple aScale; basegfx::B2DTuple aTranslate; double fRotate, fShearX; rMatrix.decompose(aScale, aTranslate, fRotate, fShearX); // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0)) { aScale.setX(fabs(aScale.getX())); aScale.setY(fabs(aScale.getY())); fRotate = fmod(fRotate + F_PI, F_2PI); } // force metric to pool metric const SfxMapUnit eMapUnit(GetObjectMapUnit()); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // position aTranslate.setX(ImplMMToTwips(aTranslate.getX())); aTranslate.setY(ImplMMToTwips(aTranslate.getY())); // size aScale.setX(ImplMMToTwips(aScale.getX())); aScale.setY(ImplMMToTwips(aScale.getY())); break; } default: { DBG_ERROR("TRSetBaseGeometry: Missing unit translation to PoolMetric!"); } } } // if anchor is used, make position relative to it if( pModel && pModel->IsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build BaseRect Point aPoint(FRound(aTranslate.getX()), FRound(aTranslate.getY())); Rectangle aBaseRect(aPoint, Size(FRound(aScale.getX()), FRound(aScale.getY()))); // set BaseRect SetSnapRect(aBaseRect); } // #116168# // Give info if object is in destruction sal_Bool SdrObject::IsInDestruction() const { if(pModel) return pModel->IsInDestruction(); return sal_False; } // return if fill is != XFILL_NONE bool SdrObject::HasFillStyle() const { return (((const XFillStyleItem&)GetObjectItem(XATTR_FILLSTYLE)).GetValue() != XFILL_NONE); } bool SdrObject::HasLineStyle() const { return (((const XLineStyleItem&)GetObjectItem(XATTR_LINESTYLE)).GetValue() != XLINE_NONE); } // #i52224# // on import of OLE object from MS documents the BLIP size might be retrieved, // the following four methods are used to control it; // usually this data makes no sence after the import is finished, since the object // might be resized Rectangle SdrObject::GetBLIPSizeRectangle() const { return maBLIPSizeRectangle; } void SdrObject::SetBLIPSizeRectangle( const Rectangle& aRect ) { maBLIPSizeRectangle = aRect; } void SdrObject::SetContextWritingMode( const sal_Int16 /*_nContextWritingMode*/ ) { // this base class does not support different writing modes, so ignore the call } // #121917# bool SdrObject::HasText() const { return false; } //////////////////////////////////////////////////////////////////////////////////////////////////// // // @@@@ @@@@@ @@@@@@ @@@@@ @@@@ @@@@ @@@@@@ @@@@ @@@@@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@@@@ @@ @@@@ @@@@@@ @@ @@ @@ @@ @@@@@ @@@@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ // @@@@ @@@@@ @@@@ @@ @@ @@ @@@@ @@ @@@@ @@ @@ @@ // //////////////////////////////////////////////////////////////////////////////////////////////////// SdrObjFactory::SdrObjFactory(sal_uInt32 nInvent, sal_uInt16 nIdent, SdrPage* pNewPage, SdrModel* pNewModel) { nInventor=nInvent; nIdentifier=nIdent; pNewObj=NULL; pPage=pNewPage; pModel=pNewModel; pObj=NULL; pNewData=NULL; } SdrObjFactory::SdrObjFactory(sal_uInt32 nInvent, sal_uInt16 nIdent, SdrObject* pObj1) { nInventor=nInvent; nIdentifier=nIdent; pNewObj=NULL; pPage=NULL; pModel=NULL; pObj=pObj1; pNewData=NULL; } SdrObject* SdrObjFactory::MakeNewObject(sal_uInt32 nInvent, sal_uInt16 nIdent, SdrPage* pPage, SdrModel* pModel) { if(pModel == NULL && pPage != NULL) pModel = pPage->GetModel(); SdrObject* pObj = NULL; if(nInvent == SdrInventor) { switch (nIdent) { case sal_uInt16(OBJ_NONE ): pObj=new SdrObject; break; case sal_uInt16(OBJ_GRUP ): pObj=new SdrObjGroup; break; case sal_uInt16(OBJ_LINE ): pObj=new SdrPathObj(OBJ_LINE ); break; case sal_uInt16(OBJ_POLY ): pObj=new SdrPathObj(OBJ_POLY ); break; case sal_uInt16(OBJ_PLIN ): pObj=new SdrPathObj(OBJ_PLIN ); break; case sal_uInt16(OBJ_PATHLINE ): pObj=new SdrPathObj(OBJ_PATHLINE ); break; case sal_uInt16(OBJ_PATHFILL ): pObj=new SdrPathObj(OBJ_PATHFILL ); break; case sal_uInt16(OBJ_FREELINE ): pObj=new SdrPathObj(OBJ_FREELINE ); break; case sal_uInt16(OBJ_FREEFILL ): pObj=new SdrPathObj(OBJ_FREEFILL ); break; case sal_uInt16(OBJ_PATHPOLY ): pObj=new SdrPathObj(OBJ_POLY ); break; case sal_uInt16(OBJ_PATHPLIN ): pObj=new SdrPathObj(OBJ_PLIN ); break; case sal_uInt16(OBJ_EDGE ): pObj=new SdrEdgeObj; break; case sal_uInt16(OBJ_RECT ): pObj=new SdrRectObj; break; case sal_uInt16(OBJ_CIRC ): pObj=new SdrCircObj(OBJ_CIRC ); break; case sal_uInt16(OBJ_SECT ): pObj=new SdrCircObj(OBJ_SECT ); break; case sal_uInt16(OBJ_CARC ): pObj=new SdrCircObj(OBJ_CARC ); break; case sal_uInt16(OBJ_CCUT ): pObj=new SdrCircObj(OBJ_CCUT ); break; case sal_uInt16(OBJ_TEXT ): pObj=new SdrRectObj(OBJ_TEXT ); break; case sal_uInt16(OBJ_TEXTEXT ): pObj=new SdrRectObj(OBJ_TEXTEXT ); break; case sal_uInt16(OBJ_TITLETEXT ): pObj=new SdrRectObj(OBJ_TITLETEXT ); break; case sal_uInt16(OBJ_OUTLINETEXT): pObj=new SdrRectObj(OBJ_OUTLINETEXT); break; case sal_uInt16(OBJ_MEASURE ): pObj=new SdrMeasureObj; break; case sal_uInt16(OBJ_GRAF ): pObj=new SdrGrafObj; break; case sal_uInt16(OBJ_OLE2 ): pObj=new SdrOle2Obj; break; case sal_uInt16(OBJ_FRAME ): pObj=new SdrOle2Obj(sal_True); break; case sal_uInt16(OBJ_CAPTION ): pObj=new SdrCaptionObj; break; case sal_uInt16(OBJ_PAGE ): pObj=new SdrPageObj; break; case sal_uInt16(OBJ_UNO ): pObj=new SdrUnoObj(String()); break; case sal_uInt16(OBJ_CUSTOMSHAPE ): pObj=new SdrObjCustomShape(); break; case sal_uInt16(OBJ_MEDIA ): pObj=new SdrMediaObj(); break; case sal_uInt16(OBJ_TABLE ): pObj=new ::sdr::table::SdrTableObj(pModel); break; } } if(pObj == NULL) { SdrObjFactory* pFact=new SdrObjFactory(nInvent,nIdent,pPage,pModel); SdrLinkList& rLL=ImpGetUserMakeObjHdl(); unsigned nAnz=rLL.GetLinkCount(); unsigned i=0; while (ipNewObj; i++; } delete pFact; } if(pObj == NULL) { // Na wenn's denn keiner will ... } if(pObj != NULL) { if(pPage != NULL) pObj->SetPage(pPage); else if(pModel != NULL) pObj->SetModel(pModel); } return pObj; } SdrObjUserData* SdrObjFactory::MakeNewObjUserData(sal_uInt32 nInvent, sal_uInt16 nIdent, SdrObject* pObj1) { SdrObjUserData* pData=NULL; if (nInvent==SdrInventor) { switch (nIdent) { case sal_uInt16(SDRUSERDATA_OBJTEXTLINK) : pData=new ImpSdrObjTextLinkUserData((SdrTextObj*)pObj1); break; } } if (pData==NULL) { SdrObjFactory aFact(nInvent,nIdent,pObj1); SdrLinkList& rLL=ImpGetUserMakeObjUserDataHdl(); unsigned nAnz=rLL.GetLinkCount(); unsigned i=0; while (i