/*************************************************************************
 *
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 * 
 * Copyright 2000, 2010 Oracle and/or its affiliates.
 *
 * OpenOffice.org - a multi-platform office productivity suite
 *
 * This file is part of OpenOffice.org.
 *
 * OpenOffice.org is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License version 3
 * only, as published by the Free Software Foundation.
 *
 * OpenOffice.org is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License version 3 for more details
 * (a copy is included in the LICENSE file that accompanied this code).
 *
 * You should have received a copy of the GNU Lesser General Public License
 * version 3 along with OpenOffice.org.  If not, see
 * <http://www.openoffice.org/license.html>
 * for a copy of the LGPLv3 License.
 *
 ************************************************************************/

// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svx.hxx"

#include <svx/svdtrans.hxx>
#include <math.h>
#include <svx/xpoly.hxx>

#include <vcl/virdev.hxx>
#include <tools/bigint.hxx>
#include <tools/debug.hxx>
#include <unotools/syslocale.hxx>

////////////////////////////////////////////////////////////////////////////////////////////////////

void MoveXPoly(XPolygon& rPoly, const Size& S)
{
	rPoly.Move(S.Width(),S.Height());
}

void MoveXPoly(XPolyPolygon& rPoly, const Size& S)
{
	rPoly.Move(S.Width(),S.Height());
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void ResizeRect(Rectangle& rRect, const Point& rRef, const Fraction& rxFact, const Fraction& ryFact, FASTBOOL bNoJustify)
{
	Fraction xFact(rxFact);
	Fraction yFact(ryFact);
	//long nHgt=rRect.Bottom()-rRect.Top();

	{
		if (xFact.GetDenominator()==0) {
			long nWdt=rRect.Right()-rRect.Left();
			if (xFact.GetNumerator()>=0) { // DivZero abfangen
				xFact=Fraction(xFact.GetNumerator(),1);
				if (nWdt==0) rRect.Right()++;
			} else {
				xFact=Fraction(xFact.GetNumerator(),-1);
				if (nWdt==0) rRect.Left()--;
			}
		}
		rRect.Left()  =rRef.X()+Round(((double)(rRect.Left()  -rRef.X())*xFact.GetNumerator())/xFact.GetDenominator());
		rRect.Right() =rRef.X()+Round(((double)(rRect.Right() -rRef.X())*xFact.GetNumerator())/xFact.GetDenominator());
	}
	{
		if (yFact.GetDenominator()==0) {
			long nHgt=rRect.Bottom()-rRect.Top();
			if (yFact.GetNumerator()>=0) { // DivZero abfangen
				yFact=Fraction(yFact.GetNumerator(),1);
				if (nHgt==0) rRect.Bottom()++;
			} else {
				yFact=Fraction(yFact.GetNumerator(),-1);
				if (nHgt==0) rRect.Top()--;
			}

			yFact=Fraction(yFact.GetNumerator(),1); // DivZero abfangen
		}
		rRect.Top()   =rRef.Y()+Round(((double)(rRect.Top()   -rRef.Y())*yFact.GetNumerator())/yFact.GetDenominator());
		rRect.Bottom()=rRef.Y()+Round(((double)(rRect.Bottom()-rRef.Y())*yFact.GetNumerator())/yFact.GetDenominator());
	}
	if (!bNoJustify) rRect.Justify();
}


void ResizePoly(Polygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
	sal_uInt16 nAnz=rPoly.GetSize();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ResizePoint(rPoly[i],rRef,xFact,yFact);
	}
}

void ResizeXPoly(XPolygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
	sal_uInt16 nAnz=rPoly.GetPointCount();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ResizePoint(rPoly[i],rRef,xFact,yFact);
	}
}

void ResizePoly(PolyPolygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ResizePoly(rPoly[i],rRef,xFact,yFact);
	}
}

void ResizeXPoly(XPolyPolygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ResizeXPoly(rPoly[i],rRef,xFact,yFact);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void RotatePoly(Polygon& rPoly, const Point& rRef, double sn, double cs)
{
	sal_uInt16 nAnz=rPoly.GetSize();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		RotatePoint(rPoly[i],rRef,sn,cs);
	}
}

void RotateXPoly(XPolygon& rPoly, const Point& rRef, double sn, double cs)
{
	sal_uInt16 nAnz=rPoly.GetPointCount();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		RotatePoint(rPoly[i],rRef,sn,cs);
	}
}

void RotatePoly(PolyPolygon& rPoly, const Point& rRef, double sn, double cs)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		RotatePoly(rPoly[i],rRef,sn,cs);
	}
}

void RotateXPoly(XPolyPolygon& rPoly, const Point& rRef, double sn, double cs)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		RotateXPoly(rPoly[i],rRef,sn,cs);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void MirrorRect(Rectangle& rRect, const Point& /*rRef1*/, const Point& /*rRef2*/, FASTBOOL bNoJustify)
{
	// !!! fehlende Implementation !!!
	if (!bNoJustify) rRect.Justify();
}

void MirrorPoint(Point& rPnt, const Point& rRef1, const Point& rRef2)
{
	long mx=rRef2.X()-rRef1.X();
	long my=rRef2.Y()-rRef1.Y();
	if (mx==0) { // Achse senkrecht
		long dx=rRef1.X()-rPnt.X();
		rPnt.X()+=2*dx;
	} else if (my==0) { // Achse waagerecht
		long dy=rRef1.Y()-rPnt.Y();
		rPnt.Y()+=2*dy;
	} else if (mx==my) { // Achse diagonal '\'
		long dx1=rPnt.X()-rRef1.X();
		long dy1=rPnt.Y()-rRef1.Y();
		rPnt.X()=rRef1.X()+dy1;
		rPnt.Y()=rRef1.Y()+dx1;
	} else if (mx==-my) { // Achse diagonal '/'
		long dx1=rPnt.X()-rRef1.X();
		long dy1=rPnt.Y()-rRef1.Y();
		rPnt.X()=rRef1.X()-dy1;
		rPnt.Y()=rRef1.Y()-dx1;
	} else { // beliebige Achse
		// mal optimieren !!!
		// Lot auf der Spiegelachse faellen oder so
		long nRefWink=GetAngle(rRef2-rRef1);
		rPnt-=rRef1;
		long nPntWink=GetAngle(rPnt);
		long nWink=2*(nRefWink-nPntWink);
		double a=nWink*nPi180;
		double nSin=sin(a);
		double nCos=cos(a);
		RotatePoint(rPnt,Point(),nSin,nCos);
		rPnt+=rRef1;
	}
}

void MirrorPoly(Polygon& rPoly, const Point& rRef1, const Point& rRef2)
{
	sal_uInt16 nAnz=rPoly.GetSize();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		MirrorPoint(rPoly[i],rRef1,rRef2);
	}
}

void MirrorXPoly(XPolygon& rPoly, const Point& rRef1, const Point& rRef2)
{
	sal_uInt16 nAnz=rPoly.GetPointCount();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		MirrorPoint(rPoly[i],rRef1,rRef2);
	}
}

void MirrorPoly(PolyPolygon& rPoly, const Point& rRef1, const Point& rRef2)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		MirrorPoly(rPoly[i],rRef1,rRef2);
	}
}

void MirrorXPoly(XPolyPolygon& rPoly, const Point& rRef1, const Point& rRef2)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		MirrorXPoly(rPoly[i],rRef1,rRef2);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void ShearPoly(Polygon& rPoly, const Point& rRef, double tn, FASTBOOL bVShear)
{
	sal_uInt16 nAnz=rPoly.GetSize();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ShearPoint(rPoly[i],rRef,tn,bVShear);
	}
}

void ShearXPoly(XPolygon& rPoly, const Point& rRef, double tn, FASTBOOL bVShear)
{
	sal_uInt16 nAnz=rPoly.GetPointCount();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ShearPoint(rPoly[i],rRef,tn,bVShear);
	}
}

void ShearPoly(PolyPolygon& rPoly, const Point& rRef, double tn, FASTBOOL bVShear)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ShearPoly(rPoly[i],rRef,tn,bVShear);
	}
}

void ShearXPoly(XPolyPolygon& rPoly, const Point& rRef, double tn, FASTBOOL bVShear)
{
	sal_uInt16 nAnz=rPoly.Count();
	for (sal_uInt16 i=0; i<nAnz; i++) {
		ShearXPoly(rPoly[i],rRef,tn,bVShear);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////
//
//   @@@@  @@@@@   @@@@   @@@@  @@  @@
//  @@  @@ @@  @@ @@  @@ @@  @@ @@  @@
//  @@     @@  @@ @@  @@ @@  @@ @@ @@
//  @@     @@@@@  @@  @@ @@  @@ @@@@
//  @@     @@  @@ @@  @@ @@  @@ @@ @@
//  @@  @@ @@  @@ @@  @@ @@  @@ @@  @@
//   @@@@  @@  @@  @@@@   @@@@  @@  @@
//
////////////////////////////////////////////////////////////////////////////////////////////////////

double CrookRotateXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
						 const Point& rRad, double& rSin, double& rCos, FASTBOOL bVert)
{
	FASTBOOL bC1=pC1!=NULL;
	FASTBOOL bC2=pC2!=NULL;
	long x0=rPnt.X();
	long y0=rPnt.Y();
	long cx=rCenter.X();
	long cy=rCenter.Y();
	double nWink=GetCrookAngle(rPnt,rCenter,rRad,bVert);
	double sn=sin(nWink);
	double cs=cos(nWink);
	RotatePoint(rPnt,rCenter,sn,cs);
	if (bC1) {
		if (bVert) {
			// Richtung Zentrum verschieben, als Ausgangsposition fuer Rotate
			pC1->Y()-=y0;
			// Resize, entsprechend der Entfernung vom Zentrum
			pC1->Y()=Round(((double)pC1->Y()) /rRad.X()*(cx-pC1->X()));
			pC1->Y()+=cy;
		} else {
			// Richtung Zentrum verschieben, als Ausgangsposition fuer Rotate
			pC1->X()-=x0;
			// Resize, entsprechend der Entfernung vom Zentrum
			long nPntRad=cy-pC1->Y();
			double nFact=(double)nPntRad/(double)rRad.Y();
			pC1->X()=Round((double)pC1->X()*nFact);
			pC1->X()+=cx;
		}
		RotatePoint(*pC1,rCenter,sn,cs);
	}
	if (bC2) {
		if (bVert) {
			// Richtung Zentrum verschieben, als Ausgangsposition fuer Rotate
			pC2->Y()-=y0;
			// Resize, entsprechend der Entfernung vom Zentrum
			pC2->Y()=Round(((double)pC2->Y()) /rRad.X()*(rCenter.X()-pC2->X()));
			pC2->Y()+=cy;
		} else {
			// Richtung Zentrum verschieben, als Ausgangsposition fuer Rotate
			pC2->X()-=x0;
			// Resize, entsprechend der Entfernung vom Zentrum
			long nPntRad=rCenter.Y()-pC2->Y();
			double nFact=(double)nPntRad/(double)rRad.Y();
			pC2->X()=Round((double)pC2->X()*nFact);
			pC2->X()+=cx;
		}
		RotatePoint(*pC2,rCenter,sn,cs);
	}
	rSin=sn;
	rCos=cs;
	return nWink;
}

double CrookSlantXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
						const Point& rRad, double& rSin, double& rCos, FASTBOOL bVert)
{
	FASTBOOL bC1=pC1!=NULL;
	FASTBOOL bC2=pC2!=NULL;
	long x0=rPnt.X();
	long y0=rPnt.Y();
	long dx1=0,dy1=0;
	long dxC1=0,dyC1=0;
	long dxC2=0,dyC2=0;
	if (bVert) {
		long nStart=rCenter.X()-rRad.X();
		dx1=rPnt.X()-nStart;
		rPnt.X()=nStart;
		if (bC1) {
			dxC1=pC1->X()-nStart;
			pC1->X()=nStart;
		}
		if (bC2) {
			dxC2=pC2->X()-nStart;
			pC2->X()=nStart;
		}
	} else {
		long nStart=rCenter.Y()-rRad.Y();
		dy1=rPnt.Y()-nStart;
		rPnt.Y()=nStart;
		if (bC1) {
			dyC1=pC1->Y()-nStart;
			pC1->Y()=nStart;
		}
		if (bC2) {
			dyC2=pC2->Y()-nStart;
			pC2->Y()=nStart;
		}
	}
	double nWink=GetCrookAngle(rPnt,rCenter,rRad,bVert);
	double sn=sin(nWink);
	double cs=cos(nWink);
	RotatePoint(rPnt,rCenter,sn,cs);
	if (bC1) { if (bVert) pC1->Y()-=y0-rCenter.Y(); else pC1->X()-=x0-rCenter.X(); RotatePoint(*pC1,rCenter,sn,cs); }
	if (bC2) { if (bVert) pC2->Y()-=y0-rCenter.Y(); else pC2->X()-=x0-rCenter.X(); RotatePoint(*pC2,rCenter,sn,cs); }
	if (bVert) {
		rPnt.X()+=dx1;
		if (bC1) pC1->X()+=dxC1;
		if (bC2) pC2->X()+=dxC2;
	} else {
		rPnt.Y()+=dy1;
		if (bC1) pC1->Y()+=dyC1;
		if (bC2) pC2->Y()+=dyC2;
	}
	rSin=sn;
	rCos=cs;
	return nWink;
}

double CrookStretchXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
						  const Point& rRad, double& rSin, double& rCos, FASTBOOL bVert,
						  const Rectangle rRefRect)
{
	//FASTBOOL bC1=pC1!=NULL;
	//FASTBOOL bC2=pC2!=NULL;
	//long x0=rPnt.X();
	long y0=rPnt.Y();
	CrookSlantXPoint(rPnt,pC1,pC2,rCenter,rRad,rSin,rCos,bVert);
	if (bVert) {
	} else {
		//long nBase=rCenter.Y()-rRad.Y();
		long nTop=rRefRect.Top();
		long nBtm=rRefRect.Bottom();
		long nHgt=nBtm-nTop;
		long dy=rPnt.Y()-y0;
		//FASTBOOL bOben=rRad.Y()<0;
		double a=((double)(y0-nTop))/nHgt;
		a*=dy;
		rPnt.Y()=y0+Round(a);
	} return 0.0;
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void CrookRotatePoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert)
{
	double nSin,nCos;
	sal_uInt16 nPointAnz=rPoly.GetPointCount();
	sal_uInt16 i=0;
	while (i<nPointAnz) {
		Point* pPnt=&rPoly[i];
		Point* pC1=NULL;
		Point* pC2=NULL;
		if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt links
			pC1=pPnt;
			i++;
			pPnt=&rPoly[i];
		}
		i++;
		if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
			pC2=&rPoly[i];
			i++;
		}
		CrookRotateXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert);
	}
}

void CrookSlantPoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert)
{
	double nSin,nCos;
	sal_uInt16 nPointAnz=rPoly.GetPointCount();
	sal_uInt16 i=0;
	while (i<nPointAnz) {
		Point* pPnt=&rPoly[i];
		Point* pC1=NULL;
		Point* pC2=NULL;
		if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt links
			pC1=pPnt;
			i++;
			pPnt=&rPoly[i];
		}
		i++;
		if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
			pC2=&rPoly[i];
			i++;
		}
		CrookSlantXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert);
	}
}

void CrookStretchPoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert, const Rectangle rRefRect)
{
	double nSin,nCos;
	sal_uInt16 nPointAnz=rPoly.GetPointCount();
	sal_uInt16 i=0;
	while (i<nPointAnz) {
		Point* pPnt=&rPoly[i];
		Point* pC1=NULL;
		Point* pC2=NULL;
		if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt links
			pC1=pPnt;
			i++;
			pPnt=&rPoly[i];
		}
		i++;
		if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
			pC2=&rPoly[i];
			i++;
		}
		CrookStretchXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert,rRefRect);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void CrookRotatePoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert)
{
	sal_uInt16 nPolyAnz=rPoly.Count();
	for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyAnz; nPolyNum++) {
		CrookRotatePoly(rPoly[nPolyNum],rCenter,rRad,bVert);
	}
}

void CrookSlantPoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert)
{
	sal_uInt16 nPolyAnz=rPoly.Count();
	for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyAnz; nPolyNum++) {
		CrookSlantPoly(rPoly[nPolyNum],rCenter,rRad,bVert);
	}
}

void CrookStretchPoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, FASTBOOL bVert, const Rectangle rRefRect)
{
	sal_uInt16 nPolyAnz=rPoly.Count();
	for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyAnz; nPolyNum++) {
		CrookStretchPoly(rPoly[nPolyNum],rCenter,rRad,bVert,rRefRect);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

long GetAngle(const Point& rPnt)
{
	long a=0;
	if (rPnt.Y()==0) {
		if (rPnt.X()<0) a=-18000;
	} else if (rPnt.X()==0) {
		if (rPnt.Y()>0) a=-9000;
		else a=9000;
	} else {
		a=Round((atan2((double)-rPnt.Y(),(double)rPnt.X())/nPi180));
	}
	return a;
}

long NormAngle180(long a)
{
	while (a<18000) a+=36000;
	while (a>=18000) a-=36000;
	return a;
}

long NormAngle360(long a)
{
	while (a<0) a+=36000;
	while (a>=36000) a-=36000;
	return a;
}

sal_uInt16 GetAngleSector(long nWink)
{
	while (nWink<0) nWink+=36000;
	while (nWink>=36000) nWink-=36000;
	if (nWink< 9000) return 0;
	if (nWink<18000) return 1;
	if (nWink<27000) return 2;
	return 3;
}

long GetLen(const Point& rPnt)
{
	long x=Abs(rPnt.X());
	long y=Abs(rPnt.Y());
	if (x+y<0x8000) { // weil 7FFF * 7FFF * 2 = 7FFE0002
		x*=x;
		y*=y;
		x+=y;
		x=Round(sqrt((double)x));
		return x;
	} else {
		double nx=x;
		double ny=y;
		nx*=nx;
		ny*=ny;
		nx+=ny;
		nx=sqrt(nx);
		if (nx>0x7FFFFFFF) {
			return 0x7FFFFFFF; // Ueberlauf, mehr is nich!
		} else {
			return Round(nx);
		}
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void GeoStat::RecalcSinCos()
{
	if (nDrehWink==0) {
		nSin=0.0;
		nCos=1.0;
	} else {
		double a=nDrehWink*nPi180;
		nSin=sin(a);
		nCos=cos(a);
	}
}

void GeoStat::RecalcTan()
{
	if (nShearWink==0) {
		nTan=0.0;
	} else {
		double a=nShearWink*nPi180;
		nTan=tan(a);
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

Polygon Rect2Poly(const Rectangle& rRect, const GeoStat& rGeo)
{
	Polygon aPol(5);
	aPol[0]=rRect.TopLeft();
	aPol[1]=rRect.TopRight();
	aPol[2]=rRect.BottomRight();
	aPol[3]=rRect.BottomLeft();
	aPol[4]=rRect.TopLeft();
	if (rGeo.nShearWink!=0) ShearPoly(aPol,rRect.TopLeft(),rGeo.nTan);
	if (rGeo.nDrehWink!=0) RotatePoly(aPol,rRect.TopLeft(),rGeo.nSin,rGeo.nCos);
	return aPol;
}

void Poly2Rect(const Polygon& rPol, Rectangle& rRect, GeoStat& rGeo)
{
	rGeo.nDrehWink=GetAngle(rPol[1]-rPol[0]);
	rGeo.nDrehWink=NormAngle360(rGeo.nDrehWink);
	// Drehung ist damit im Kasten
	rGeo.RecalcSinCos();

	Point aPt1(rPol[1]-rPol[0]);
	if (rGeo.nDrehWink!=0) RotatePoint(aPt1,Point(0,0),-rGeo.nSin,rGeo.nCos); // -Sin fuer Rueckdrehung
	long nWdt=aPt1.X();

	Point aPt0(rPol[0]);
	Point aPt3(rPol[3]-rPol[0]);
	if (rGeo.nDrehWink!=0) RotatePoint(aPt3,Point(0,0),-rGeo.nSin,rGeo.nCos); // -Sin fuer Rueckdrehung
	long nHgt=aPt3.Y();

	if(aPt3.X())
	{
		// #i74358# the axes are not orthogonal, so for getting the correct height, 
		// calculate the length of aPt3

		// #i74358# this change was wrong, in the field of the old geometry stuff
		// it is not an error. The new height always is the same as before; shear
		// does not change object height at all. This is different from the interactions,
		// but obviously wanted in the old versions.
		//
		// nHgt = static_cast< long >(sqrt(static_cast< double >(aPt3.X() * aPt3.X() + aPt3.Y() * aPt3.Y())));
	}

    long nShW=GetAngle(aPt3);
	nShW-=27000; // ShearWink wird zur Senkrechten gemessen
	nShW=-nShW;  // Negieren, denn '+' ist Rechtskursivierung

	FASTBOOL bMirr=aPt3.Y()<0;
	if (bMirr) { // "Punktetausch" bei Spiegelung
		nHgt=-nHgt;
		nShW+=18000;
		aPt0=rPol[3];
	}
	nShW=NormAngle180(nShW);
	if (nShW<-9000 || nShW>9000) {
		nShW=NormAngle180(nShW+18000);
	}
	if (nShW<-SDRMAXSHEAR) nShW=-SDRMAXSHEAR; // ShearWinkel begrenzen auf +/- 89.00 deg
	if (nShW>SDRMAXSHEAR)  nShW=SDRMAXSHEAR;
	rGeo.nShearWink=nShW;
	rGeo.RecalcTan();
	Point aRU(aPt0);
	aRU.X()+=nWdt;
	aRU.Y()+=nHgt;
	rRect=Rectangle(aPt0,aRU);
}

////////////////////////////////////////////////////////////////////////////////////////////////////

void OrthoDistance8(const Point& rPt0, Point& rPt, FASTBOOL bBigOrtho)
{
	long dx=rPt.X()-rPt0.X();
	long dy=rPt.Y()-rPt0.Y();
	long dxa=Abs(dx);
	long dya=Abs(dy);
	if (dx==0 || dy==0 || dxa==dya) return;
	if (dxa>=dya*2) { rPt.Y()=rPt0.Y(); return; }
	if (dya>=dxa*2) { rPt.X()=rPt0.X(); return; }
	if ((dxa<dya) != bBigOrtho) {
		rPt.Y()=rPt0.Y()+(dxa* (dy>=0 ? 1 : -1) );
	} else {
		rPt.X()=rPt0.X()+(dya* (dx>=0 ? 1 : -1) );
	}
}

void OrthoDistance4(const Point& rPt0, Point& rPt, FASTBOOL bBigOrtho)
{
	long dx=rPt.X()-rPt0.X();
	long dy=rPt.Y()-rPt0.Y();
	long dxa=Abs(dx);
	long dya=Abs(dy);
	if ((dxa<dya) != bBigOrtho) {
		rPt.Y()=rPt0.Y()+(dxa* (dy>=0 ? 1 : -1) );
	} else {
		rPt.X()=rPt0.X()+(dya* (dx>=0 ? 1 : -1) );
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////

long BigMulDiv(long nVal, long nMul, long nDiv)
{
	BigInt aVal(nVal);
	aVal*=nMul;
	if (aVal.IsNeg()!=(nDiv<0)) {
		aVal-=nDiv/2; // fuer korrektes Runden
	} else {
		aVal+=nDiv/2; // fuer korrektes Runden
	}
	if(nDiv)
	{
		aVal/=nDiv;
		return long(aVal);
	}
	return 0x7fffffff;
}

void Kuerzen(Fraction& rF, unsigned nDigits)
{
	sal_Int32 nMul=rF.GetNumerator();
	sal_Int32 nDiv=rF.GetDenominator();
	FASTBOOL bNeg=sal_False;
	if (nMul<0) { nMul=-nMul; bNeg=!bNeg; }
	if (nDiv<0) { nDiv=-nDiv; bNeg=!bNeg; }
	if (nMul==0 || nDiv==0) return;
	sal_uInt32 a;
	a=sal_uInt32(nMul); unsigned nMulZ=0; // Fuehrende Nullen zaehlen
	while (a<0x00800000) { nMulZ+=8; a<<=8; }
	while (a<0x80000000) { nMulZ++; a<<=1; }
	a=sal_uInt32(nDiv); unsigned nDivZ=0; // Fuehrende Nullen zaehlen
	while (a<0x00800000) { nDivZ+=8; a<<=8; }
	while (a<0x80000000) { nDivZ++; a<<=1; }
	// Anzahl der verwendeten Digits bestimmen
	int nMulDigits=32-nMulZ;
	int nDivDigits=32-nDivZ;
	// Nun bestimmen, wieviele Stellen hinten weg koennen
	int nMulWeg=nMulDigits-nDigits; if (nMulWeg<0) nMulWeg=0;
	int nDivWeg=nDivDigits-nDigits; if (nDivWeg<0) nDivWeg=0;
	int nWeg=Min(nMulWeg,nDivWeg);
	nMul>>=nWeg;
	nDiv>>=nWeg;
	if (nMul==0 || nDiv==0) {
		DBG_WARNING("Oups, beim kuerzen einer Fraction hat sich Joe verrechnet.");
		return;
	}
	if (bNeg) nMul=-nMul;
	rF=Fraction(nMul,nDiv);
}

////////////////////////////////////////////////////////////////////////////////////////////////////
// Wieviele eU-Einheiten passen in einen mm bzw. Inch?
// Oder wie gross ist ein eU in mm bzw. Inch, und davon der Kehrwert

FrPair GetInchOrMM(MapUnit eU)
{
	switch (eU) {
		case MAP_1000TH_INCH: return FrPair(1000,1);
		case MAP_100TH_INCH : return FrPair( 100,1);
		case MAP_10TH_INCH  : return FrPair(  10,1);
		case MAP_INCH       : return FrPair(   1,1);
		case MAP_POINT      : return FrPair(  72,1);
		case MAP_TWIP       : return FrPair(1440,1);
		case MAP_100TH_MM   : return FrPair( 100,1);
		case MAP_10TH_MM    : return FrPair(  10,1);
		case MAP_MM         : return FrPair(   1,1);
		case MAP_CM         : return FrPair(   1,10);
		case MAP_PIXEL      : {
			VirtualDevice aVD;
			aVD.SetMapMode(MapMode(MAP_100TH_MM));
			Point aP(aVD.PixelToLogic(Point(64,64))); // 64 Pixel fuer bessere Genauigkeit
			return FrPair(6400,aP.X(),6400,aP.Y());
		}
		case MAP_APPFONT: case MAP_SYSFONT: {
			VirtualDevice aVD;
			aVD.SetMapMode(MapMode(eU));
			Point aP(aVD.LogicToPixel(Point(32,32))); // 32 Einheiten fuer bessere Genauigkeit
			aVD.SetMapMode(MapMode(MAP_100TH_MM));
			aP=aVD.PixelToLogic(aP);
			return FrPair(3200,aP.X(),3200,aP.Y());
		}
		default: break;
	}
	return Fraction(1,1);
}

FrPair GetInchOrMM(FieldUnit eU)
{
	switch (eU) {
		case FUNIT_INCH       : return FrPair(   1,1);
		case FUNIT_POINT      : return FrPair(  72,1);
		case FUNIT_TWIP       : return FrPair(1440,1);
		case FUNIT_100TH_MM   : return FrPair( 100,1);
		case FUNIT_MM         : return FrPair(   1,1);
		case FUNIT_CM         : return FrPair(   1,10);
		case FUNIT_M          : return FrPair(   1,1000);
		case FUNIT_KM         : return FrPair(   1,1000000);
		case FUNIT_PICA       : return FrPair(   6,1);
		case FUNIT_FOOT       : return FrPair(   1,12);
		case FUNIT_MILE       : return FrPair(   1,63360);
		default: break;
	}
	return Fraction(1,1);
}

// Den Faktor berechnen, der anzuwenden ist um n Einheiten von eS nach
// eD umzurechnen. Z.B. GetMapFactor(UNIT_MM,UNIT_100TH_MM) => 100.

FrPair GetMapFactor(MapUnit eS, MapUnit eD)
{
	if (eS==eD) return FrPair(1,1,1,1);
	FrPair aS(GetInchOrMM(eS));
	FrPair aD(GetInchOrMM(eD));
	FASTBOOL bSInch=IsInch(eS);
	FASTBOOL bDInch=IsInch(eD);
	FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
	if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
	if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
	return aRet;
};

FrPair GetMapFactor(MapUnit eS, FieldUnit eD)
{
	FrPair aS(GetInchOrMM(eS));
	FrPair aD(GetInchOrMM(eD));
	FASTBOOL bSInch=IsInch(eS);
	FASTBOOL bDInch=IsInch(eD);
	FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
	if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
	if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
	return aRet;
};

FrPair GetMapFactor(FieldUnit eS, MapUnit eD)
{
	FrPair aS(GetInchOrMM(eS));
	FrPair aD(GetInchOrMM(eD));
	FASTBOOL bSInch=IsInch(eS);
	FASTBOOL bDInch=IsInch(eD);
	FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
	if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
	if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
	return aRet;
};

FrPair GetMapFactor(FieldUnit eS, FieldUnit eD)
{
	if (eS==eD) return FrPair(1,1,1,1);
	FrPair aS(GetInchOrMM(eS));
	FrPair aD(GetInchOrMM(eD));
	FASTBOOL bSInch=IsInch(eS);
	FASTBOOL bDInch=IsInch(eD);
	FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
	if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
	if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
	return aRet;
};

////////////////////////////////////////////////////////////////////////////////////////////////////

	// 1 mile    =  8 furlong = 63.360" = 1.609.344,0mm
	// 1 furlong = 10 chains  =  7.920" =   201.168,0mm
	// 1 chain   =  4 poles   =    792" =    20.116,8mm
	// 1 pole    =  5 1/2 yd  =    198" =     5.029,2mm
	// 1 yd      =  3 ft      =     36" =       914,4mm
	// 1 ft      = 12 "       =      1" =       304,8mm

void GetMeterOrInch(MapUnit eMU, short& rnKomma, long& rnMul, long& rnDiv, int& rbMetr, int& rbInch)
{
	rnMul=1; rnDiv=1;
	short nKomma=0;
	FASTBOOL bMetr=sal_False,bInch=sal_False;
	switch (eMU) {
		// Metrisch
		case MAP_100TH_MM   : bMetr=sal_True; nKomma=5; break;
		case MAP_10TH_MM    : bMetr=sal_True; nKomma=4; break;
		case MAP_MM         : bMetr=sal_True; nKomma=3; break;
		case MAP_CM         : bMetr=sal_True; nKomma=2; break;
		// Inch
		case MAP_1000TH_INCH: bInch=sal_True; nKomma=3; break;
		case MAP_100TH_INCH : bInch=sal_True; nKomma=2; break;
		case MAP_10TH_INCH  : bInch=sal_True; nKomma=1; break;
		case MAP_INCH       : bInch=sal_True; nKomma=0; break;
		case MAP_POINT      : bInch=sal_True; rnDiv=72;  break;          // 1Pt   = 1/72"
		case MAP_TWIP       : bInch=sal_True; rnDiv=144; nKomma=1; break; // 1Twip = 1/1440"
		// Sonstiges
		case MAP_PIXEL      : break;
		case MAP_SYSFONT    : break;
		case MAP_APPFONT    : break;
		case MAP_RELATIVE   : break;
		default: break;
	} // switch
	rnKomma=nKomma;
	rbMetr=bMetr;
	rbInch=bInch;
}

void GetMeterOrInch(FieldUnit eFU, short& rnKomma, long& rnMul, long& rnDiv, int& rbMetr, int& rbInch)
{
	rnMul=1; rnDiv=1;
	short nKomma=0;
	FASTBOOL bMetr=sal_False,bInch=sal_False;
	switch (eFU) {
		case FUNIT_NONE     : break;
		// Metrisch
		case FUNIT_100TH_MM : bMetr=sal_True; nKomma=5; break;
		case FUNIT_MM       : bMetr=sal_True; nKomma=3; break;
		case FUNIT_CM       : bMetr=sal_True; nKomma=2; break;
		case FUNIT_M        : bMetr=sal_True; nKomma=0; break;
		case FUNIT_KM       : bMetr=sal_True; nKomma=-3; break;
		// Inch
		case FUNIT_TWIP     : bInch=sal_True; rnDiv=144; nKomma=1; break;  // 1Twip = 1/1440"
		case FUNIT_POINT    : bInch=sal_True; rnDiv=72; break;   // 1Pt   = 1/72"
		case FUNIT_PICA     : bInch=sal_True; rnDiv=6; break;    // 1Pica = 1/6"  ?
		case FUNIT_INCH     : bInch=sal_True; break;             // 1"    = 1"
		case FUNIT_FOOT     : bInch=sal_True; rnMul=12; break;   // 1Ft   = 12"
		case FUNIT_MILE     : bInch=sal_True; rnMul=6336; nKomma=-1; break; // 1mile = 63360"
		// sonstiges
		case FUNIT_CUSTOM   : break;
		case FUNIT_PERCENT  : nKomma=2; break;
	} // switch
	rnKomma=nKomma;
	rbMetr=bMetr;
	rbInch=bInch;
}

void SdrFormatter::Undirty()
{
	if (aScale.GetNumerator()==0 || aScale.GetDenominator()==0) aScale=Fraction(1,1);
	FASTBOOL bSrcMetr,bSrcInch,bDstMetr,bDstInch;
	long nMul1,nDiv1,nMul2,nDiv2;
	short nKomma1,nKomma2;
	// Zunaechst normalisieren auf m bzw. "
	if (!bSrcFU) {
		GetMeterOrInch(eSrcMU,nKomma1,nMul1,nDiv1,bSrcMetr,bSrcInch);
	} else {
		GetMeterOrInch(eSrcFU,nKomma1,nMul1,nDiv1,bSrcMetr,bSrcInch);
	}
	if (!bDstFU) {
		GetMeterOrInch(eDstMU,nKomma2,nMul2,nDiv2,bDstMetr,bDstInch);
	} else {
		GetMeterOrInch(eDstFU,nKomma2,nMul2,nDiv2,bDstMetr,bDstInch);
	}
	nMul1*=nDiv2;
	nDiv1*=nMul2;
	nKomma1=nKomma1-nKomma2;

	if (bSrcInch && bDstMetr) {
		nKomma1+=4;
		nMul1*=254;
	}
	if (bSrcMetr && bDstInch) {
		nKomma1-=4;
		nDiv1*=254;
	}

	// Temporaere Fraction zum Kuerzen
	Fraction aTempFract(nMul1,nDiv1);
	nMul1=aTempFract.GetNumerator();
	nDiv1=aTempFract.GetDenominator();

	nMul_=nMul1;
	nDiv_=nDiv1;
	nKomma_=nKomma1;
	bDirty=sal_False;
}


void SdrFormatter::TakeStr(long nVal, XubString& rStr) const
{
	sal_Unicode aNullCode('0');

	if(!nVal)
	{
		rStr = UniString();
		rStr += aNullCode;
		return;
	}

	// Hier fallen trotzdem evtl. Nachkommastellen weg, wg. MulDiv statt Real
	sal_Bool bNeg(nVal < 0);
    SvtSysLocale aSysLoc;
    const LocaleDataWrapper& rLoc = aSysLoc.GetLocaleData();

	ForceUndirty();

	sal_Int16 nK(nKomma_);
	XubString aStr;

	if(bNeg)
		nVal = -nVal;

	while(nK <= -3)
	{
		nVal *= 1000;
		nK += 3;
	}

	while(nK <= -1)
	{
		nVal *= 10;
		nK++;
	}

	if(nMul_ != nDiv_)
		nVal = BigMulDiv(nVal, nMul_, nDiv_);

	aStr = UniString::CreateFromInt32(nVal);

	if(nK > 0 && aStr.Len() <= nK )
	{
		// Komma erforderlich
		sal_Int16 nAnz(nK - aStr.Len());

        if(nAnz >= 0 && rLoc.isNumLeadingZero())
			nAnz++;

		for(xub_StrLen  i=0; i<nAnz; i++)
			aStr.Insert(aNullCode, 0);

		// zuviele Nachkommastellen abhacken
        xub_StrLen nNumDigits(rLoc.getNumDigits());
		xub_StrLen nWeg(nK - nNumDigits);

		if(nWeg > 0)
		{
			// hier muesste eigentlich noch gerundet werden!
			aStr.Erase(aStr.Len() - nWeg);
			nK = nNumDigits;
		}
	}

	// Vorkommastellen fuer spaeter merken
	xub_StrLen nVorKomma(aStr.Len() - nK);

	if(nK > 0)
	{
		// KommaChar einfuegen
		// erstmal trailing Zeros abhacken
		while(nK > 0 && aStr.GetChar(aStr.Len() - 1) == aNullCode)
		{
			aStr.Erase(aStr.Len() - 1);
			nK--;
		}

		if(nK > 0)
		{
			// na, noch Nachkommastellen da?
            sal_Unicode cDec(rLoc.getNumDecimalSep().GetChar(0));
			aStr.Insert(cDec, nVorKomma);
		}
	}

	// ggf. Trennpunkte bei jedem Tausender einfuegen
    if( nVorKomma > 3 )
	{
        String aThoSep( rLoc.getNumThousandSep() );
        if ( aThoSep.Len() > 0 )
        {
            sal_Unicode cTho( aThoSep.GetChar(0) );
            sal_Int32 i(nVorKomma - 3);

            while(i > 0)
            {
                rStr.Insert(cTho, (xub_StrLen)i);
                i -= 3;
            }
        }
	}

	if(!aStr.Len())
		aStr += aNullCode;

	if(bNeg && (aStr.Len() > 1 || aStr.GetChar(0) != aNullCode))
	{
		rStr.Insert(sal_Unicode('-'), 0);
	}

	rStr = aStr;
}

void SdrFormatter::TakeUnitStr(MapUnit eUnit, XubString& rStr)
{
	switch(eUnit)
	{
		// Metrisch
		case MAP_100TH_MM   :
		{
			sal_Char aText[] = "/100mm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_10TH_MM    :
		{
			sal_Char aText[] = "/10mm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_MM         :
		{
			sal_Char aText[] = "mm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_CM         :
		{
			sal_Char aText[] = "cm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}

		// Inch
		case MAP_1000TH_INCH:
		{
			sal_Char aText[] = "/1000\"";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_100TH_INCH :
		{
			sal_Char aText[] = "/100\"";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_10TH_INCH  :
		{
			sal_Char aText[] = "/10\"";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_INCH       :
		{
			rStr = UniString();
			rStr += sal_Unicode('"');
			break;
		}
		case MAP_POINT      :
		{
			sal_Char aText[] = "pt";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_TWIP       :
		{
			sal_Char aText[] = "twip";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}

		// Sonstiges
		case MAP_PIXEL      :
		{
			sal_Char aText[] = "pixel";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_SYSFONT    :
		{
			sal_Char aText[] = "sysfont";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_APPFONT    :
		{
			sal_Char aText[] = "appfont";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case MAP_RELATIVE   :
		{
			rStr = UniString();
			rStr += sal_Unicode('%');
			break;
		}
		default: break;
	}
}

void SdrFormatter::TakeUnitStr(FieldUnit eUnit, XubString& rStr)
{
	switch(eUnit)
	{
		default				:
		case FUNIT_NONE		:
		case FUNIT_CUSTOM	:
		{
			rStr = UniString();
			break;
		}

		// Metrisch
		case FUNIT_100TH_MM:
		{
			sal_Char aText[] = "/100mm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_MM     :
		{
			sal_Char aText[] = "mm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_CM     :
		{
			sal_Char aText[] = "cm";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_M      :
		{
			rStr = UniString();
			rStr += sal_Unicode('m');
			break;
		}
		case FUNIT_KM     :
		{
			sal_Char aText[] = "km";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}

		// Inch
		case FUNIT_TWIP   :
		{
			sal_Char aText[] = "twip";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_POINT  :
		{
			sal_Char aText[] = "pt";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_PICA   :
		{
			sal_Char aText[] = "pica";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_INCH   :
		{
			rStr = UniString();
			rStr += sal_Unicode('"');
			break;
		}
		case FUNIT_FOOT   :
		{
			sal_Char aText[] = "ft";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}
		case FUNIT_MILE   :
		{
			sal_Char aText[] = "mile(s)";
			rStr = UniString(aText, sizeof(aText-1));
			break;
		}

		// sonstiges
		case FUNIT_PERCENT:
		{
			rStr = UniString();
			rStr += sal_Unicode('%');
			break;
		}
	}
}

////////////////////////////////////////////////////////////////////////////////////////////////////