/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_basic.hxx"

#include "sbcomp.hxx"

// Single-line IF und Multiline IF

void SbiParser::If()
{
	sal_uInt32 nEndLbl;
	SbiToken eTok = NIL;
	// Ende-Tokens ignorieren:
	SbiExpression aCond( this );
	aCond.Gen();
	TestToken( THEN );
	if( IsEoln( Next() ) )
	{
		// AB 13.5.1996: #27720# Am Ende jeden Blocks muss ein Jump zu ENDIF
		// eingefuegt werden, damit bei ELSEIF nicht erneut die Bedingung
		// ausgewertet wird. Die Tabelle nimmt alle Absprungstellen auf.
#define JMP_TABLE_SIZE 100
		sal_uInt32 pnJmpToEndLbl[JMP_TABLE_SIZE];	// 100 ELSEIFs zulaessig
		sal_uInt16 iJmp = 0;						// aktueller Tabellen-Index

		// multiline IF
		nEndLbl = aGen.Gen( _JUMPF, 0 );
		eTok = Peek();
		while( !( eTok == ELSEIF || eTok == ELSE || eTok == ENDIF ) &&
				!bAbort && Parse() )
		{
			eTok = Peek();
			if( IsEof() )
			{
				Error( SbERR_BAD_BLOCK, IF ); bAbort = sal_True; return;
			}
		}
		// ELSEIF?
		while( eTok == ELSEIF )
		{
			// #27720# Bei erfolgreichem IF/ELSEIF auf ENDIF springen
			if( iJmp >=	JMP_TABLE_SIZE )
			{
				Error( SbERR_PROG_TOO_LARGE );	bAbort = sal_True; 	return;
			}
			pnJmpToEndLbl[iJmp++] = aGen.Gen( _JUMP, 0 );

			Next();
			aGen.BackChain( nEndLbl );

			aGen.Statement();
			SbiExpression* pCond = new SbiExpression( this );
			pCond->Gen();
			nEndLbl = aGen.Gen( _JUMPF, 0 );
			delete pCond;
			TestToken( THEN );
			eTok = Peek();
			while( !( eTok == ELSEIF || eTok == ELSE || eTok == ENDIF ) &&
					!bAbort && Parse() )
			{
				eTok = Peek();
				if( IsEof() )
				{
					Error( SbERR_BAD_BLOCK, ELSEIF );  bAbort = sal_True; return;
				}
			}
		}
		if( eTok == ELSE )
		{
			Next();
			sal_uInt32 nElseLbl = nEndLbl;
			nEndLbl = aGen.Gen( _JUMP, 0 );
			aGen.BackChain( nElseLbl );

			aGen.Statement();
			StmntBlock( ENDIF );
		}
		else if( eTok == ENDIF )
			Next();

		// #27720# Jmp-Tabelle abarbeiten
		while( iJmp > 0 )
		{
			iJmp--;
			aGen.BackChain( pnJmpToEndLbl[iJmp] );
		}
	}
	else
	{
		// single line IF
		bSingleLineIf = sal_True;
		nEndLbl = aGen.Gen( _JUMPF, 0 );
		Push( eCurTok );
		while( !bAbort )
		{
			if( !Parse() ) break;
			eTok = Peek();
			if( eTok == ELSE || eTok == EOLN || eTok == REM )
				break;
		}
		if( eTok == ELSE )
		{
			Next();
			sal_uInt32 nElseLbl = nEndLbl;
			nEndLbl = aGen.Gen( _JUMP, 0 );
			aGen.BackChain( nElseLbl );
			while( !bAbort )
			{
				if( !Parse() ) break;
				eTok = Peek();
				if( eTok == EOLN || eTok == REM )
					break;
			}
		}
		bSingleLineIf = sal_False;
	}
	aGen.BackChain( nEndLbl );
}

// ELSE/ELSEIF/ENDIF ohne IF

void SbiParser::NoIf()
{
	Error( SbERR_NO_IF );
	StmntBlock( ENDIF );
}

// DO WHILE...LOOP
// DO ... LOOP WHILE

void SbiParser::DoLoop()
{
	sal_uInt32 nStartLbl = aGen.GetPC();
	OpenBlock( DO );
	SbiToken eTok = Next();
	if( IsEoln( eTok ) )
	{
		// DO ... LOOP [WHILE|UNTIL expr]
		StmntBlock( LOOP );
		eTok = Next();
		if( eTok == UNTIL || eTok == WHILE )
		{
			SbiExpression aExpr( this );
			aExpr.Gen();
			aGen.Gen( eTok == UNTIL ? _JUMPF : _JUMPT, nStartLbl );
		} else
			if (eTok == EOLN || eTok == REM)
				aGen.Gen (_JUMP, nStartLbl);
			else
				Error( SbERR_EXPECTED, WHILE );
	}
	else
	{
		// DO [WHILE|UNTIL expr] ... LOOP
		if( eTok == UNTIL || eTok == WHILE )
		{
			SbiExpression aCond( this );
			aCond.Gen();
		}
		sal_uInt32 nEndLbl = aGen.Gen( eTok == UNTIL ? _JUMPT : _JUMPF, 0 );
		StmntBlock( LOOP );
		TestEoln();
		aGen.Gen( _JUMP, nStartLbl );
		aGen.BackChain( nEndLbl );
	}
	CloseBlock();
}

// WHILE ... WEND

void SbiParser::While()
{
	SbiExpression aCond( this );
	sal_uInt32 nStartLbl = aGen.GetPC();
	aCond.Gen();
	sal_uInt32 nEndLbl = aGen.Gen( _JUMPF, 0 );
	StmntBlock( WEND );
	aGen.Gen( _JUMP, nStartLbl );
	aGen.BackChain( nEndLbl );
}

// FOR var = expr TO expr STEP

void SbiParser::For()
{
	bool bForEach = ( Peek() == EACH );
	if( bForEach )
		Next();
	SbiExpression aLvalue( this, SbOPERAND );
	aLvalue.Gen();		// Variable auf dem Stack

	if( bForEach )
	{
		TestToken( _IN_ );
		SbiExpression aCollExpr( this, SbOPERAND );
		aCollExpr.Gen();	// Colletion var to for stack
		TestEoln();	
		aGen.Gen( _INITFOREACH );
	}
	else
	{
		TestToken( EQ );
		SbiExpression aStartExpr( this );
		aStartExpr.Gen();	// Startausdruck auf dem Stack
		TestToken( TO );
		SbiExpression aStopExpr( this );
		aStopExpr.Gen();	// Endausdruck auf dem Stack
		if( Peek() == STEP )
		{
			Next();
			SbiExpression aStepExpr( this );
			aStepExpr.Gen();
		}
		else
		{
			SbiExpression aOne( this, 1, SbxINTEGER );
			aOne.Gen();
		}
		TestEoln();
		// Der Stack hat jetzt 4 Elemente: Variable, Start, Ende, Inkrement
		// Startwert binden
		aGen.Gen( _INITFOR );
	}

	sal_uInt32 nLoop = aGen.GetPC();
	// Test durchfuehren, evtl. Stack freigeben
	sal_uInt32 nEndTarget = aGen.Gen( _TESTFOR, 0 );
	OpenBlock( FOR );
	StmntBlock( NEXT );
	aGen.Gen( _NEXT );
	aGen.Gen( _JUMP, nLoop );
	// Kommen Variable nach NEXT?
	if( Peek() == SYMBOL )
	{
		SbiExpression aVar( this, SbOPERAND );
		if( aVar.GetRealVar() != aLvalue.GetRealVar() )
			Error( SbERR_EXPECTED, aLvalue.GetRealVar()->GetName() );
	}
	aGen.BackChain( nEndTarget );
	CloseBlock();
}

// WITH .. END WITH

void SbiParser::With()
{
	SbiExpression aVar( this, SbOPERAND );

	// Letzten Knoten in der Objekt-Kette ueberpruefen
	SbiExprNode *pNode = aVar.GetExprNode()->GetRealNode();
	SbiSymDef* pDef = pNode->GetVar();
	// Variant, AB 27.6.1997, #41090: bzw. empty -> muß Object sein
	if( pDef->GetType() == SbxVARIANT || pDef->GetType() == SbxEMPTY )
		pDef->SetType( SbxOBJECT );
	else if( pDef->GetType() != SbxOBJECT )
		Error( SbERR_NEEDS_OBJECT );

	// Knoten auch auf SbxOBJECT setzen, damit spaeter Gen() klappt
	pNode->SetType( SbxOBJECT );

	OpenBlock( NIL, aVar.GetExprNode() );
	StmntBlock( ENDWITH );
	CloseBlock();
}

// LOOP/NEXT/WEND ohne Konstrukt

void SbiParser::BadBlock()
{
	if( eEndTok )
		Error( SbERR_BAD_BLOCK, eEndTok );
	else
		Error( SbERR_BAD_BLOCK, "Loop/Next/Wend" );
}

// On expr Goto/Gosub n,n,n...

void SbiParser::OnGoto()
{
	SbiExpression aCond( this );
	aCond.Gen();
	sal_uInt32 nLabelsTarget = aGen.Gen( _ONJUMP, 0 );
	SbiToken eTok = Next();
	if( eTok != GOTO && eTok != GOSUB )
	{
		Error( SbERR_EXPECTED, "GoTo/GoSub" );
		eTok = GOTO;
	}
	// Label-Tabelle einlesen:
	sal_uInt32 nLbl = 0;
	do
	{
		SbiToken eTok2 = NIL;
		eTok2 = Next();	// Label holen
		if( MayBeLabel() )
		{
			sal_uInt32 nOff = pProc->GetLabels().Reference( aSym );
			aGen.Gen( _JUMP, nOff );
			nLbl++;
		}
		else Error( SbERR_LABEL_EXPECTED );
	}
	while( !bAbort && TestComma() );
	if( eTok == GOSUB )
		nLbl |= 0x8000;
	aGen.Patch( nLabelsTarget, nLbl );
}

// GOTO/GOSUB

void SbiParser::Goto()
{
	SbiOpcode eOp = eCurTok == GOTO ? _JUMP : _GOSUB;
	Next();
	if( MayBeLabel() )
	{
		sal_uInt32 nOff = pProc->GetLabels().Reference( aSym );
		aGen.Gen( eOp, nOff );
	}
	else Error( SbERR_LABEL_EXPECTED );
}

// RETURN [label]

void SbiParser::Return()
{
	Next();
	if( MayBeLabel() )
	{
		sal_uInt32 nOff = pProc->GetLabels().Reference( aSym );
		aGen.Gen( _RETURN, nOff );
	}
	else aGen.Gen( _RETURN, 0 );
}

// SELECT CASE

void SbiParser::Select()
{
	TestToken( CASE );
	SbiExpression aCase( this );
	SbiToken eTok = NIL;
	aCase.Gen();
	aGen.Gen( _CASE );
	TestEoln();
	sal_uInt32 nNextTarget = 0;
	sal_uInt32 nDoneTarget = 0;
	sal_Bool bElse = sal_False;
	// Die Cases einlesen:
	while( !bAbort )
	{
		eTok = Next();
		if( eTok == CASE )
		{
			if( nNextTarget )
				aGen.BackChain( nNextTarget ), nNextTarget = 0;
			aGen.Statement();
			// Jeden Case einlesen
			sal_Bool bDone = sal_False;
			sal_uInt32 nTrueTarget = 0;
			if( Peek() == ELSE )
			{
				// CASE ELSE
				Next();
				bElse = sal_True;
			}
			else while( !bDone )
			{
				if( bElse )
					Error( SbERR_SYNTAX );
				SbiToken eTok2 = Peek();
				if( eTok2 == IS || ( eTok2 >= EQ && eTok2 <= GE ) )
				{	// CASE [IS] operator expr
					if( eTok2 == IS )
						Next();
					eTok2 = Peek();
					if( eTok2 < EQ || eTok2 > GE )
						Error( SbERR_SYNTAX );
					else Next();
					SbiExpression aCompare( this );
					aCompare.Gen();
					nTrueTarget = aGen.Gen(
                        _CASEIS, nTrueTarget,
                        sal::static_int_cast< sal_uInt16 >(
                            SbxEQ + ( eTok2 - EQ ) ) );
				}
				else
				{	// CASE expr | expr TO expr
					SbiExpression aCase1( this );
					aCase1.Gen();
					if( Peek() == TO )
					{
						// CASE a TO b
						Next();
						SbiExpression aCase2( this );
						aCase2.Gen();
						nTrueTarget = aGen.Gen( _CASETO, nTrueTarget );
					}
					else
						// CASE a
						nTrueTarget = aGen.Gen( _CASEIS, nTrueTarget, SbxEQ );

				}
				if( Peek() == COMMA ) Next();
				else TestEoln(), bDone = sal_True;
			}
			// Alle Cases abgearbeitet
			if( !bElse )
			{
				nNextTarget = aGen.Gen( _JUMP, nNextTarget );
				aGen.BackChain( nTrueTarget );
			}
			// den Statement-Rumpf bauen
			while( !bAbort )
			{
				eTok = Peek();
				if( eTok == CASE || eTok == ENDSELECT )
					break;
				if( !Parse() ) goto done;
				eTok = Peek();
				if( eTok == CASE || eTok == ENDSELECT )
					break;
			}
			if( !bElse )
				nDoneTarget = aGen.Gen( _JUMP, nDoneTarget );
		}
		else if( !IsEoln( eTok ) )
			break;
	}
done:
	if( eTok != ENDSELECT )
		Error( SbERR_EXPECTED, ENDSELECT );
	if( nNextTarget )
		aGen.BackChain( nNextTarget );
	aGen.BackChain( nDoneTarget );
	aGen.Gen( _ENDCASE );
}

// ON Error/Variable

#ifdef _MSC_VER
#pragma optimize("",off)
#endif

void SbiParser::On()
{
	SbiToken eTok = Peek();
	String aString = SbiTokenizer::Symbol(eTok);
	if (aString.EqualsIgnoreCaseAscii("ERROR"))
	//if (!aString.ICompare("ERROR"))
		eTok = _ERROR_;	// Error kommt als SYMBOL
	if( eTok != _ERROR_ && eTok != LOCAL ) OnGoto();
	else
	{
		if( eTok == LOCAL ) Next();
		Next (); // Kein TestToken mehr, da es sonst einen Fehler gibt

		Next();	// Token nach Error holen
		if( eCurTok == GOTO )
		{
			// ON ERROR GOTO label|0
			Next();
			bool bError_ = false;
			if( MayBeLabel() )
			{
				if( eCurTok == NUMBER && !nVal )
					aGen.Gen( _STDERROR );
				else
				{
					sal_uInt32 nOff = pProc->GetLabels().Reference( aSym );
					aGen.Gen( _ERRHDL, nOff );
				}
			}
			else if( eCurTok == MINUS )
			{
				Next();
				if( eCurTok == NUMBER && nVal == 1 )
					aGen.Gen( _STDERROR );
				else
					bError_ = true;
			}
			if( bError_ )
				Error( SbERR_LABEL_EXPECTED );			
		}
		else if( eCurTok == RESUME )
		{
			TestToken( NEXT );
			aGen.Gen( _NOERROR );
		}
		else Error( SbERR_EXPECTED, "GoTo/Resume" );
	}
}

#ifdef _MSC_VER
#pragma optimize("",off)
#endif

// RESUME [0]|NEXT|label

void SbiParser::Resume()
{
	sal_uInt32 nLbl;

	switch( Next() )
	{
		case EOS:
		case EOLN:
			aGen.Gen( _RESUME, 0 );
			break;
		case NEXT:
			aGen.Gen( _RESUME, 1 );
			Next();
			break;
		case NUMBER:
			if( !nVal )
			{
				aGen.Gen( _RESUME, 0 );
				break;
			} // fall through
		case SYMBOL:
			if( MayBeLabel() )
			{
				nLbl = pProc->GetLabels().Reference( aSym );
				aGen.Gen( _RESUME, nLbl );
				Next();
				break;
			} // fall through
		default:
			Error( SbERR_LABEL_EXPECTED );
	}
}