/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ #ifndef __FRAMEWORK_SERVICES_AUTORECOVERY_HXX_ #define __FRAMEWORK_SERVICES_AUTORECOVERY_HXX_ //_______________________________________________ // own includes #include #include #include #include #include #include //_______________________________________________ // interface includes #include #include #include #include #include #include #include #include #include #include #include #include //_______________________________________________ // other includes #include #include #include #include #include #include //_______________________________________________ // definition #ifndef css namespace css = ::com::sun::star; #endif namespace framework { //--------------------------------------- /** @short hold all needed informations for an asynchronous dispatch alive. @descr Because some operations are forced to be executed asynchronously (e.g. requested by our CreashSave/Recovery dialog) ... we must make sure that these informations wont be set as "normal" members of our AtoRecovery instance. Otherwise they can disturb our normal AutoSave-timer handling. e.g. it can be unclear then, which progress has to be used for storing documents ... */ struct DispatchParams { public: DispatchParams(); DispatchParams(const ::comphelper::SequenceAsHashMap& lArgs , const css::uno::Reference< css::uno::XInterface >& xOwner); DispatchParams(const DispatchParams& rCopy); ~DispatchParams(); DispatchParams& operator=(const DispatchParams& rCopy); void forget(); public: //--------------------------------------- /** @short can be set from outside and is provided to our internal started operations. @descr Normally we use the normal status indicator of the document windows to show a progress. But in case we are used by any special UI, it can provide its own status indicator object to us - so we use it instead of the normal one. */ css::uno::Reference< css::task::XStatusIndicator > m_xProgress; //--------------------------------------- /** TODO document me */ ::rtl::OUString m_sSavePath; //--------------------------------------- /** @short define the current cache entry, which should be used for current backup or cleanUp operation ... which is may be done asynchronous */ sal_Int32 m_nWorkingEntryID; //--------------------------------------- /** @short used for asyncoperations, to prevent us from dying. @descr If our dispatch() method was forced to start the internal operation asynchronous ... we send an event to start and return immediately. But we must be sure that our instance live if the event callback reach us. So we hold an uno reference to ourself. */ css::uno::Reference< css::uno::XInterface > m_xHoldRefForAsyncOpAlive; }; //_______________________________________________ /** implements the functionality of AutoSave and AutoRecovery of documents - including features of an EmergencySave in case a GPF occurs. */ class AutoRecovery : public css::lang::XTypeProvider , public css::lang::XServiceInfo , public css::frame::XDispatch , public css::document::XEventListener // => css.lang.XEventListener , public css::util::XChangesListener // => css.lang.XEventListener , public css::util::XModifyListener // => css.lang.XEventListener // attention! Must be the first base class to guarantee right initialize lock ... , private ThreadHelpBase , public ::cppu::OBroadcastHelper , public ::cppu::OPropertySetHelper // => XPropertySet, XFastPropertySet, XMultiPropertySet , public ::cppu::OWeakObject { //___________________________________________ // types public: /** These values are used as flags and represent the current state of a document. Every state of the life time of a document has to be recognized here. @attention Do not change (means reorganize) already used numbers. There exists some code inside SVX, which uses the same numbers, to analyze such document states. Not the best design ... but may be it will be changed later .-) */ enum EDocStates { /* TEMP STATES */ /// default state, if a document was new created or loaded E_UNKNOWN = 0, /// modified against the original file E_MODIFIED = 1, /// an active document can be postponed to be saved later. E_POSTPONED = 2, /// was already handled during one AutoSave/Recovery session. E_HANDLED = 4, /** an action was started (saving/loading) ... Can be interesting later if the process may be was interrupted by an exception. */ E_TRY_SAVE = 8, E_TRY_LOAD_BACKUP = 16, E_TRY_LOAD_ORIGINAL = 32, /* FINAL STATES */ /// the Auto/Emergency saved document isn't useable any longer E_DAMAGED = 64, /// the Auto/Emergency saved document isn't really up-to-date (some changes can be missing) E_INCOMPLETE = 128, /// the Auto/Emergency saved document was processed successfully E_SUCCEDED = 512 }; /** @short indicates the results of a FAILURE_SAFE operation @descr We must know, which reason was the real one in case we couldnt copy a "failure document" to a user specified path. We must know, if we can forget our cache entry or not. */ enum EFailureSafeResult { E_COPIED, E_ORIGINAL_FILE_MISSING, E_WRONG_TARGET_PATH }; // TODO document me enum ETimerType { /** the timer shouldn't be used next time */ E_DONT_START_TIMER, /** timer (was/must be) started with normal AutoSaveTimeIntervall */ E_NORMAL_AUTOSAVE_INTERVALL, /** timer must be started with special short time intervall, to poll for an user idle period */ E_POLL_FOR_USER_IDLE, /** timer mst be started with a very(!) short time intervall, to poll for the end of an user action, which does not allow saving documents in general */ E_POLL_TILL_AUTOSAVE_IS_ALLOWED, /** dont start the timer - but calls the same action then before immediately again! */ E_CALL_ME_BACK }; // TODO document me ... flag field // Emergency_Save and Recovery overwrites Auto_Save! enum EJob { E_NO_JOB = 0, E_AUTO_SAVE = 1, E_EMERGENCY_SAVE = 2, E_RECOVERY = 4, E_ENTRY_BACKUP = 8, E_ENTRY_CLEANUP = 16, E_PREPARE_EMERGENCY_SAVE = 32, E_SESSION_SAVE = 64, E_SESSION_RESTORE = 128, E_DISABLE_AUTORECOVERY = 256, E_SET_AUTOSAVE_STATE = 512, E_SESSION_QUIET_QUIT = 1024 }; //--------------------------------------- /** @short combine different informations about one office document. */ struct TDocumentInfo { public: //------------------------------- TDocumentInfo() : DocumentState (E_UNKNOWN) , UsedForSaving (sal_False) , ListenForModify (sal_False) , IgnoreClosing (sal_False) , ID (-1 ) {} //------------------------------- /** @short points to the document. */ css::uno::Reference< css::frame::XModel > Document; //------------------------------- /** @short knows, if the document is really modified since the last autosave, or was postponed, because it was an active one etcpp... @descr Because we have no CHANGE TRACKING mechanism, based on office document, we implements it by ourself. We listen for MODIFIED events of each document and update this state flag here. Further we postpone saving of active documents, e.g. if the user works currently on it. We wait for an idle period then ... */ sal_Int32 DocumentState; //------------------------------- /** Because our applications not ready for concurrent save requests at the same time, we have suppress our own AutoSave for the moment, a document will be already saved by others. */ sal_Bool UsedForSaving; //------------------------------- /** For every user action, which modifies a document (e.g. key input) we get a notification as XModifyListener. That seams to be a "performance issue" .-) So we decided to listen for such modify events only for the time in which the document was stored as temp. file and was not modified again by the user. */ sal_Bool ListenForModify; //------------------------------- /** For SessionSave we must close all open documents by ourself. But because we are listen for documents events, we get some ... and deregister these documents from our configuration. That's why we mark these documents as "Closed by ourself" so we can ignore these "OnUnload" or disposing() events .-) */ sal_Bool IgnoreClosing; //------------------------------- /** TODO: document me */ ::rtl::OUString OrgURL; ::rtl::OUString FactoryURL; ::rtl::OUString TemplateURL; ::rtl::OUString OldTempURL; ::rtl::OUString NewTempURL; ::rtl::OUString AppModule; // e.g. com.sun.star.text.TextDocument - used to identify app module ::rtl::OUString FactoryService; // the service to create a document of the module ::rtl::OUString RealFilter; // real filter, which was used at loading time ::rtl::OUString DefaultFilter; // supports saving of the default format without losing data ::rtl::OUString Extension; // file extension of the default filter ::rtl::OUString Title; // can be used as "DisplayName" on every recovery UI! ::com::sun::star::uno::Sequence< ::rtl::OUString > ViewNames; // names of the view which were active at emergency-save time sal_Int32 ID; }; //--------------------------------------- /** @short used to know every currently open document. */ typedef ::std::vector< TDocumentInfo > TDocumentList; //___________________________________________ // member private: //--------------------------------------- /** @short the global uno service manager. @descr Must be used to create own needed services. */ css::uno::Reference< css::lang::XMultiServiceFactory > m_xSMGR; //--------------------------------------- /** @short points to the underlying recovery configuration. @descr This instance does not cache - it calls directly the configuration API! */ css::uno::Reference< css::container::XNameAccess > m_xRecoveryCFG; //--------------------------------------- /** @short points to the used configuration package or.openoffice.Setup @descr This instance does not cache - it calls directly the configuration API! */ css::uno::Reference< css::container::XNameAccess > m_xModuleCFG; //--------------------------------------- /** @short holds the global event broadcaster alive, where we listen for new created documents. */ css::uno::Reference< css::document::XEventBroadcaster > m_xNewDocBroadcaster; //--------------------------------------- /** @short because we stop/restart listening sometimes, it's a good idea to know if we already registered as listener .-) */ sal_Bool m_bListenForDocEvents; sal_Bool m_bListenForConfigChanges; //--------------------------------------- /** @short specify the time intervall between two save actions. @descr Time is measured in [min]. */ sal_Int32 m_nAutoSaveTimeIntervall; //--------------------------------------- /** @short for an asynchronous operation we must know, if there is at least one running job (may be asynchronous!). */ sal_Int32 m_eJob; //--------------------------------------- /** @short the timer, which is used to be informed about the next saving time ... */ Timer m_aTimer; //--------------------------------------- /** @short make our dispatch asynchronous ... if required to do so! */ ::vcl::EventPoster m_aAsyncDispatcher; //--------------------------------------- /** @see DispatchParams */ DispatchParams m_aDispatchParams; //--------------------------------------- /** @short indicates, which time period is currently used by the internal timer. */ ETimerType m_eTimerType; //--------------------------------------- /** @short this cache is used to hold all informations about recovery/emergency save documents alive. */ TDocumentList m_lDocCache; //--------------------------------------- // TODO document me sal_Int32 m_nIdPool; //--------------------------------------- /** @short contains all status listener registered at this instance. */ ListenerHash m_lListener; /** @descr This member is used to prevent us against re-entrance problems. A mutex can't help to prevent us from concurrent using of members inside the same thread. But e.g. our internally used stl structures are not threadsafe ... and furthermore they can't be used at the same time for iteration and add/remove requests! So we have to detect such states and ... show a warning. May be there will be a better solution next time ... (copying the cache temp. before using). And further it's not possible to use a simple boolean value here. Because if more than one operation iterates over the same stl container ... (only to modify its elements but don't add new or removing existing ones!) it should be possible doing so. But we must guarantee that the last operation resets this lock ... not the first one ! So we use a "ref count" mechanism for that." */ sal_Int32 m_nDocCacheLock; /** @descr These members are used to check the minimum disc space, which must exists to start the corresponding operation. */ sal_Int32 m_nMinSpaceDocSave; sal_Int32 m_nMinSpaceConfigSave; //--------------------------------------- /** @short special debug option to make testing faster. @descr We dont interpret the timer unit as [min] ... we use [ms] instead of that. Further we dont wait 10 s for user idle ... */ #if OSL_DEBUG_LEVEL > 1 sal_Bool m_dbg_bMakeItFaster; #endif //--------------------------------------- // HACK ... TODO css::uno::Reference< css::task::XStatusIndicator > m_xExternalProgress; //___________________________________________ // interface public: AutoRecovery(const css::uno::Reference< css::lang::XMultiServiceFactory >& xSMGR); virtual ~AutoRecovery( ); // XInterface, XTypeProvider, XServiceInfo FWK_DECLARE_XINTERFACE FWK_DECLARE_XTYPEPROVIDER DECLARE_XSERVICEINFO //--------------------------------------- // css.frame.XDispatch virtual void SAL_CALL dispatch(const css::util::URL& aURL , const css::uno::Sequence< css::beans::PropertyValue >& lArguments) throw(css::uno::RuntimeException); virtual void SAL_CALL addStatusListener(const css::uno::Reference< css::frame::XStatusListener >& xListener, const css::util::URL& aURL ) throw(css::uno::RuntimeException); virtual void SAL_CALL removeStatusListener(const css::uno::Reference< css::frame::XStatusListener >& xListener, const css::util::URL& aURL ) throw(css::uno::RuntimeException); //--------------------------------------- // css.document.XEventListener /** @short informs about created/opened documents. @descr Every new opened/created document will be saved internally so it can be checked if it's modified. This modified state is used later to decide, if it must be saved or not. @param aEvent points to the new created/opened document. */ virtual void SAL_CALL notifyEvent(const css::document::EventObject& aEvent) throw(css::uno::RuntimeException); //--------------------------------------- // css.util.XChangesListener virtual void SAL_CALL changesOccurred(const css::util::ChangesEvent& aEvent) throw(css::uno::RuntimeException); //--------------------------------------- // css.util.XModifyListener virtual void SAL_CALL modified(const css::lang::EventObject& aEvent) throw(css::uno::RuntimeException); //--------------------------------------- // css.lang.XEventListener using cppu::OPropertySetHelper::disposing; virtual void SAL_CALL disposing(const css::lang::EventObject& aEvent) throw(css::uno::RuntimeException); //___________________________________________ // helper protected: //--------------------------------------- // OPropertySetHelper virtual sal_Bool SAL_CALL convertFastPropertyValue( css::uno::Any& aConvertedValue, css::uno::Any& aOldValue , sal_Int32 nHandle , const css::uno::Any& aValue ) throw(css::lang::IllegalArgumentException); virtual void SAL_CALL setFastPropertyValue_NoBroadcast( sal_Int32 nHandle, const css::uno::Any& aValue ) throw(css::uno::Exception); using cppu::OPropertySetHelper::getFastPropertyValue; virtual void SAL_CALL getFastPropertyValue(css::uno::Any& aValue , sal_Int32 nHandle) const; virtual ::cppu::IPropertyArrayHelper& SAL_CALL getInfoHelper(); virtual css::uno::Reference< css::beans::XPropertySetInfo > SAL_CALL getPropertySetInfo() throw(css::uno::RuntimeException); //___________________________________________ // helper private: //--------------------------------------- /** @short open the underlying configuration. @descr This method must be called everytimes a configuartion call is needed. Because method works together with the member m_xCFG, open it on demand and cache it afterwards. @return [com.sun.star.container.XNameAccess] the configuration object @throw [com.sun.star.uno.RuntimeException] if config could not be opened successfully! @threadsafe */ css::uno::Reference< css::container::XNameAccess > implts_openConfig(); //--------------------------------------- /** @short read the underlying configuration. @descr After that we know the initial state - means: - if AutoSave was enabled by the user - which time intervall has to be used - which recovery entries may already exists @throw [com.sun.star.uno.RuntimeException] if config could not be opened or readed successfully! @threadsafe */ void implts_readConfig(); //--------------------------------------- /** @short read the underlying configuration... @descr ... but only keys related to the AutoSave mechanism. Means: State and Timer intervall. E.g. the recovery list isn't addressed here. @throw [com.sun.star.uno.RuntimeException] if config could not be opened or readed successfully! @threadsafe */ void implts_readAutoSaveConfig(); //--------------------------------------- // TODO document me void implts_flushConfigItem(const AutoRecovery::TDocumentInfo& rInfo , sal_Bool bRemoveIt = sal_False); //--------------------------------------- // TODO document me void implts_startListening(); void implts_startModifyListeningOnDoc(AutoRecovery::TDocumentInfo& rInfo); //--------------------------------------- // TODO document me void implts_stopListening(); void implts_stopModifyListeningOnDoc(AutoRecovery::TDocumentInfo& rInfo); //--------------------------------------- /** @short stops and may be(!) restarts the timer. @descr A running timer is stopped everytimes here. But starting depends from the different internal timer variables (e.g. AutoSaveEnabled, AutoSaveTimeIntervall, TimerType etcpp.) @throw [com.sun.star.uno.RuntimeException] if timer could not be stopped or started! @threadsafe */ void implts_updateTimer(); //--------------------------------------- /** @short stop the timer. @descr Double calls will be ignored - means we do nothing here, if the timer is already disabled. @throw [com.sun.star.uno.RuntimeException] if timer could not be stopped! @threadsafe */ void implts_stopTimer(); //--------------------------------------- /** @short callback of our internal timer. */ DECL_LINK(implts_timerExpired, void*); //--------------------------------------- /** @short makes our dispatch() method asynchronous! */ DECL_LINK(implts_asyncDispatch, void*); //--------------------------------------- /** @short implements the dispatch real. */ void implts_dispatch(const DispatchParams& aParams); //--------------------------------------- /** @short validate new detected document and add it into the internal document list. @descr This method should be called only, if its clear that a new document was opened/created during office runtime. This method checks, if its a top level document (means not an embedded one). Only such top level documents can be recognized by this auto save mechanism. @param xDocument the new document, which should be checked and registered. @threadsafe */ void implts_registerDocument(const css::uno::Reference< css::frame::XModel >& xDocument); //--------------------------------------- /** @short remove the specified document from our internal document list. @param xDocument the new document, which should be deregistered. @param bStopListening sal_False: must be used in case this method is called withion disposing() of the document, where it make no sense to deregister our listener. The container dies ... sal_True : must be used in case this method is used on "dergistration" of this document, where we must deregister our listener .-) @threadsafe */ void implts_deregisterDocument(const css::uno::Reference< css::frame::XModel >& xDocument , sal_Bool bStopListening = sal_True); //--------------------------------------- // TODO document me void implts_markDocumentModifiedAgainstLastBackup(const css::uno::Reference< css::frame::XModel >& xDocument); //--------------------------------------- // TODO document me void implts_updateModifiedState(const css::uno::Reference< css::frame::XModel >& xDocument); //--------------------------------------- // TODO document me void implts_updateDocumentUsedForSavingState(const css::uno::Reference< css::frame::XModel >& xDocument , sal_Bool bSaveInProgress); //--------------------------------------- // TODO document me void implts_markDocumentAsSaved(const css::uno::Reference< css::frame::XModel >& xDocument); //--------------------------------------- /** @short search a document inside given list. @param rList reference to a vector, which can contain such document. @param xDocument the document, which should be located inside the given list. @return [TDocumentList::iterator] which points to the located document. If document does not exists - its set to rList.end()! */ static TDocumentList::iterator impl_searchDocument( AutoRecovery::TDocumentList& rList , const css::uno::Reference< css::frame::XModel >& xDocument); //--------------------------------------- /** TODO document me */ void implts_changeAllDocVisibility(sal_Bool bVisible); void implts_prepareSessionShutdown(); //--------------------------------------- /** @short save all current opened documents to a specific backup directory. @descr Only really changed documents will be saved here. Further this method returns a suggestion, if and how it should be called again. May be some documents was not saved yet and must wait for an user idle period ... @param bAllowUserIdleLoop Because this method is used for different uses cases, it must know, which actions are allowed or not. AUTO_SAVE => If a document is the most active one, saving it will be postponed if there exists other unsaved documents. This feature was implemented, because we dont wish to disturb the user on it's work. ... bAllowUserIdleLoop should be set to sal_True EMERGENCY_SAVE / SESSION_SAVE => Here we must finish our work ASAP! It's not allowed to postpone any document. ... bAllowUserIdleLoop must(!) be set to sal_False @param pParams sometimes this method is required inside an external dispatch request. The it contains some special environment variables, which overwrites our normal environment. AutoSave => pParams == 0 SessionSave/CrashSave => pParams != 0 @return A suggestion, how the timer (if its not already disabled!) should be restarted to full fill the requirements. @threadsafe */ AutoRecovery::ETimerType implts_saveDocs( sal_Bool bAllowUserIdleLoop, sal_Bool bRemoveLockFiles, const DispatchParams* pParams = 0); //--------------------------------------- /** @short save one of the current documents to a specific backup directory. @descr It: - defines a new(!) unique temp file name - save the new temp file - remove the old temp file - patch the given info struct - and return errors. It does not: - patch the configuration. Note further: It paches the info struct more then ones. E.g. the new temp URL is set before the file is saved. And the old URL is removed only if removing oft he old file was successfully. If this method returns without an exception - everything was OK. Otherwhise the info struct can be analyzed to get more information, e.g. when the problem occurs. @param sBackupPath the base path for saving such temp files. @param rInfo points to an informations structure, where e.g. the document, its modified state, the count of autosave-retries etcpp. exists. Its used also to return the new temp file name and some other state values! @threadsafe */ void implts_saveOneDoc(const ::rtl::OUString& sBackupPath , AutoRecovery::TDocumentInfo& rInfo , const css::uno::Reference< css::task::XStatusIndicator >& xExternalProgress); //--------------------------------------- /** @short recovery all documents, which was saved during a crash before. @return A suggestion, how this method must be called back! @threadsafe */ AutoRecovery::ETimerType implts_openDocs(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_openOneDoc(const ::rtl::OUString& sURL , ::comphelper::MediaDescriptor& lDescriptor, AutoRecovery::TDocumentInfo& rInfo ); //--------------------------------------- // TODO document me void implts_generateNewTempURL(const ::rtl::OUString& sBackupPath , ::comphelper::MediaDescriptor& rMediaDescriptor, AutoRecovery::TDocumentInfo& rInfo ); //--------------------------------------- /** @short notifies all interested listener about the current state of the currently running operation. @descr We support different set's of functions. AUTO_SAVE, EMERGENCY_SAVE, AUTO_RECOVERY, FAILURE_SAVE ... etcpp. Listener can register itself for any type of supported functionality ... but not for document URL's in special. @param eJob is used to know, which set of listener we must notify. @param aEvent describe the event more in detail. @threadsafe */ void implts_informListener( sal_Int32 eJob , const css::frame::FeatureStateEvent& aEvent); //--------------------------------------- /** short create a feature event struct, which can be send to any interested listener. @param eJob describe the current running operation AUTOSAVE, EMERGENCYSAVE, RECOVERY @param sEventType describe the type of this event START, STOP, UPDATE @param pInfo if sOperation is an update, this parameter must be different from NULL and is used to send informations regarding the current handled document. @return [css::frame::FeatureStateEvent] the event structure for sending. */ static css::frame::FeatureStateEvent implst_createFeatureStateEvent( sal_Int32 eJob , const ::rtl::OUString& sEventType, AutoRecovery::TDocumentInfo* pInfo ); //--------------------------------------- // TODO document me void implts_resetHandleStates(sal_Bool bLoadCache); //--------------------------------------- // TODO document me void implts_specifyDefaultFilterAndExtension(AutoRecovery::TDocumentInfo& rInfo); //--------------------------------------- // TODO document me void implts_specifyAppModuleAndFactory(AutoRecovery::TDocumentInfo& rInfo); /** retrieves the names of all active views of the given document @param rInfo the document info, whose Document member must not be . */ void implts_collectActiveViewNames( AutoRecovery::TDocumentInfo& rInfo ); /** updates the configuration so that for all documents, their current view/names are stored */ void implts_persistAllActiveViewNames(); //--------------------------------------- // TODO document me void implts_prepareEmergencySave(); //--------------------------------------- // TODO document me void implts_doEmergencySave(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_doRecovery(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_doSessionSave(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_doSessionQuietQuit(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_doSessionRestore(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_backupWorkingEntry(const DispatchParams& aParams); //--------------------------------------- // TODO document me void implts_cleanUpWorkingEntry(const DispatchParams& aParams); //--------------------------------------- /** try to make sure that all changed config items (not our used config access only) will be flushed back to disc. E.g. our svtools::ConfigItems() has to be flushed explicitly .-( Note: This method can't fail. Flushing of config entries is an optional feature. Errors can be ignored. */ void impl_flushALLConfigChanges(); //--------------------------------------- // TODO document me AutoRecovery::EFailureSafeResult implts_copyFile(const ::rtl::OUString& sSource , const ::rtl::OUString& sTargetPath, const ::rtl::OUString& sTargetName); //--------------------------------------- /** @short converts m_eJob into a job description, which can be used to inform an outside listener about the current running operation @param eJob describe the current running operation AUTOSAVE, EMERGENCYSAVE, RECOVERY @return [string] a suitable job description of form: vnd.sun.star.autorecovery:/do... */ static ::rtl::OUString implst_getJobDescription(sal_Int32 eJob); //--------------------------------------- /** @short mape the given URL to an internal int representation. @param aURL the url, which describe the next starting or may be already running operation. @return [long] the internal int representation see enum EJob */ static sal_Int32 implst_classifyJob(const css::util::URL& aURL); /// TODO void implts_verifyCacheAgainstDesktopDocumentList(); /// TODO document me sal_Bool impl_enoughDiscSpace(sal_Int32 nRequiredSpace); /// TODO document me static void impl_showFullDiscError(); //--------------------------------------- /** @short try to create/use a progress and set it inside the environment. @descr The problem behind: There exists different use case of this method. a) An external progress is provided by our CrashSave or Recovery dialog. b) We must create our own progress e.g. for an AutoSave c) Sometimes our application filters dont use the progress provided by the MediaDescriptor. They uses the Frame every time to create it's own progress. So we implemented a HACK for these and now we set an InterceptedProgress there for the time WE use this frame for loading/storing documents .-) @param xNewFrame must be set only in case WE create a new frame (e.g. for loading documents on session restore or recovery). Then search for a frame using rInfo.Document must be suppressed and xFrame must be preferred instead .-) @param rInfo used e.g. to find the frame corresponding to a document. This frame must be used to create a new progress e.g. for an AutoSave. @param rArgs is used to set the new created progress as parameter on these set. */ void impl_establishProgress(const AutoRecovery::TDocumentInfo& rInfo , ::comphelper::MediaDescriptor& rArgs , const css::uno::Reference< css::frame::XFrame >& xNewFrame); void impl_forgetProgress(const AutoRecovery::TDocumentInfo& rInfo , ::comphelper::MediaDescriptor& rArgs , const css::uno::Reference< css::frame::XFrame >& xNewFrame); //--------------------------------------- /** try to remove the specified file from disc. Every URL supported by our UCB component can be used here. Further it doesn't matter if the file really exists or not. Because removing a non exsistent file will have the same result at the end ... a non existing file .-) On the other side removing of files from disc is an optional feature. If we are not able doing so ... its not a real problem. Ok - users disc place will be samller then ... but we should produce a crash during crash save because we can't delete a temporary file only ! @param sURL the url of the file, which should be removed. */ static void st_impl_removeFile(const ::rtl::OUString& sURL); //--------------------------------------- /** try to remove ".lock" file from disc if office will be terminated not using the official way .-) This method has to be handled "optional". So every error inside has to be ignored ! This method CAN'T FAIL ... it can forget something only .-) */ static void st_impl_removeLockFile(); }; } // namespace framework #endif // __FRAMEWORK_SERVICES_AUTORECOVERY_HXX_