/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ #ifndef __com_sun_star_document_MediaDescriptor_idl__ #define __com_sun_star_document_MediaDescriptor_idl__ #ifndef __com_sun_star_io_XOutputStream_idl__ #include #endif #ifndef __com_sun_star_io_XInputStream_idl__ #include #endif #ifndef __com_sun_star_awt_Rectangle_idl__ #include #endif #ifndef __com_sun_star_beans_NamedValue_idl__ #include #endif #ifndef __com_sun_star_util_URL_idl__ #include #endif #ifndef __com_sun_star_task_XInteractionHandler_idl__ #include #endif #ifndef __com_sun_star_task_XStatusIndicator_idl__ #include #endif #ifndef __com_sun_star_frame_XFrame_idl__ #include #endif //============================================================================= module com { module sun { module star { module document { //============================================================================= /** describes properties of a document, regarding the relationship between the loaded document and the resource the document is loaded from / stored to.

This service may be represented by a PropertyValue. Such descriptors will be passed to different functions, included into possible load/save proccesses. Every member of such process can use this descriptor and may change it if to actualize the informations about the document. So this descriptor should be used as an in/out parameter.

Note:
It's not allowed to hold member of this descriptor by references longer the they will be used (especially a possible stream). It's allowed to use it directly or by copying it only.

@see com::sun::star::beans::PropertyValue */ published service MediaDescriptor { //------------------------------------------------------------------------- /** May be set by filters or detection services if user has chosen to abort loading/saving, e.g. while entering a password. */ [optional,property] boolean Aborted; //------------------------------------------------------------------------- /** document is a template

Loading a component of type "template" creates a new untitled document by default, but setting the "AsTemplate" property to loads the template document for editing. Setting "AsTemplate" to creates a new untitled document out of the loaded document, even if it has not a "template" type.

*/ [optional,property] boolean AsTemplate; //------------------------------------------------------------------------- /** the author of the document

Only for storing versions in components supporting versioning: author of version.

*/ [optional,property] string Author; //------------------------------------------------------------------------- /** identifier of used character set

Defines the character set for document formats that contain single byte characters (if necessary).

*/ [optional,property] string CharacterSet; //------------------------------------------------------------------------- /** description of document

Only for storing versions in components supporting versioning: comment (description) for stored version.

*/ [optional,property] string Comment; //------------------------------------------------------------------------- /** pack specific properties of caller

This is a parameter that can be used for any properties specific for a special component type. Format of that depends from real type of addressed component.

For extensibility, it is recommended to use values of type sequence with this property.

*/ [optional,property] any ComponentData; //------------------------------------------------------------------------- /** The base URL of the document to be used to resolve relative links. */ [optional,property] string DocumentBaseURL; //------------------------------------------------------------------------- /** document title

This parameter can be used to specify a title for a document.

*/ [optional,property] string DocumentTitle; //------------------------------------------------------------------------- /** encryption information for encryption/decryption of documents

It contains the necessary information for encryption/decryption of a component (if necessary). If neither password nor encryption data is specified, loading of a password protected document will fail, storing will be done without encryption. If both are provided, the encryption data is used ( if the filter supports it ).

The encryption data is generated based on the password.

*/ [optional,property] sequence< ::com::sun::star::beans::NamedValue > EncryptionData; //------------------------------------------------------------------------- /** same as MediaDescriptor::URL

It will be supported for compatibility reasons only.

@deprecated */ [optional,property] string FileName; //------------------------------------------------------------------------- /** internal filter name

Name of a filter that should be used for loading or storing the component. Names must match the names of the TypeDetection configuration, invalid names are ignored. If a name is specified on loading, it still will be verified by a filter detection, but in case of doubt it will be preferred.

*/ [optional,property] string FilterName; //------------------------------------------------------------------------- /** same as MediaDescriptor::FilterOptions

It will be supported for compatibility reasons only.

@deprecated */ [optional,property] string FilterFlags; //------------------------------------------------------------------------- /** additional properties for filter

Some filters need additional parameters; use only together with property MediaDescriptor::FilterName. Details must be documented by the filter. This is an old format for some filters. If a string is not enough, filters can use the property MediaDescriptor::FilterData.

*/ [optional,property] string FilterOptions; //------------------------------------------------------------------------- /** additional properties for filter

This is a parameter that can be used for any properties specific for a special filter type. It should be used if MediaDescriptor::FilterOptions isn't enough.

*/ [optional,property] any FilterData; //------------------------------------------------------------------------- /** load document invisible

Defines if the loaded component is made visible. If this property is not specified, the component is made visible by default.

*/ [optional,property] boolean Hidden; //------------------------------------------------------------------------- /** The hierarchical path to the embedded document from topmost container. */ [optional,property] string HierarchicalDocumentName; //------------------------------------------------------------------------- /** a stream to receive the document data.

If used when storing a document: writing must be done using this stream. If no stream is provided, the loader will create a stream by itself using the other properties. It is not allowed to keep a reference to this OutputStream after storing the component.

*/ [optional,property] com::sun::star::io::XOutputStream OutputStream; //------------------------------------------------------------------------- /** content of document

If used when loading a document: reading must be done using this stream. If no stream is provided, the loader will create a stream by itself using the other properties. It is not allowed to keep a reference to this InputStream after loading the component, and it would be useless, because in general an InputStream is usable for readong only once, except when it also implements the XSeekable interface.

*/ [optional,property] com::sun::star::io::XInputStream InputStream; //------------------------------------------------------------------------- /** handle exceptional situations

Object implementing the InteractionHandler service that is used to handle exceptional situations where proceeding with the task is impossible without additional information or impossible at all. The implemented api provides a default implementation for it that can handle many situations. If no InteractionHandler is set, a suitable exception is thrown. It is not allowed to keep a reference to this object, even not in the loaded or stored components' copy of the MediaDescriptor provided by its arguments attribute.

*/ [optional,property] com::sun::star::task::XInteractionHandler InteractionHandler; //------------------------------------------------------------------------- /** jump to a marked position after loading

This is the same as the text behind a '#' in a http URL. But this syntax with a '#' is not specified in most URL schemas.

*/ [optional,property] string JumpMark; //------------------------------------------------------------------------- /** specify mime type of content

Type of the medium to load, that must match to one of the types defined in the TypeDetection configuration (otherwise it's ignored). This bypasses the type detection of the Desktop environment, so passing a wrong MediaType will cause failure of loading.

*/ [optional,property] string MediaType; //------------------------------------------------------------------------- /** please use the corresponding parameters of this descriptor instead

String that summarizes some flags for loading. The string contains capital letters for the flags:
flag value replacement
ReadOnly R MediaDescriptor::ReadOnly
Preview B MediaDescriptor::Preview
AsTemplate T MediaDescriptor::AsTemplate
Hidden H MediaDescriptor::Hidden

@deprecated */ [optional,property] string OpenFlags; //------------------------------------------------------------------------- /** opens a new view for an already loaded document

Setting this to forces the component to create a new window on loading in any case. If the component supports multiple views, a second view is opened, if not, the component is loaded one more time. Otherwise the behavior depends on the default window handling of the Desktop environment.

*/ [optional,property] boolean OpenNewView; //------------------------------------------------------------------------- /** overwrite any existing file

For storing only: overwrite any existing file, default is , so an error occurs if the target file already exists.

*/ [optional,property] boolean Overwrite; //------------------------------------------------------------------------- /** pasword for loading storing documents

It contains a password for loading or storing a component (if necessary). If neither password nor encryption data is specified, loading of a password protected document will fail, storing will be done without encryption. If both are provided, the encryption data is used ( if the filter supports it ).

*/ [optional,property] string Password; //------------------------------------------------------------------------- /** contains the data for HTTP post method as a sequence of bytes.

Data to send to a location described by the media descriptor to get a result in return that will be loaded as a component (usually in webforms). Default is: no PostData.

*/ [optional,property] sequence< byte > PostData; //------------------------------------------------------------------------- /** use MediaDescriptor::PostData instead of this

Same as PostData, but the data is transferred as a string (just for compatibility).

@deprecated */ [optional,property] string PostString; //------------------------------------------------------------------------- /** show preview

Setting this to tells the a loaded component that it is loaded as a preview, so it can optimize loading and viewing for this special purpose. Default is .

*/ [optional,property] boolean Preview; //------------------------------------------------------------------------- /** open document readonly

Tells whether a document should be loaded in a (logical) readonly or in read/write mode. If opening in the desired mode is impossible, an error occurs. By default the loaded content decides what to do: if its UCB content supports a "readonly" property, the logical open mode depends on that, otherwise it will be read/write. This is only a UI related property, opening a document in read only mode will not prevent the component from being modified by API calls, but all modifying functionality in the UI will be disabled or removed.

*/ [optional,property] boolean ReadOnly; //------------------------------------------------------------------------- /** start presentation from a document

Tells the component loading the document that a presentation that is in the document is to be started right away.

*/ [optional,property] boolean StartPresentation; //------------------------------------------------------------------------- /** name of document referrer

A URL describing the environment of the request; f.e. a referrer may be a URL of a document, if a hyperlink inside this document is clicked to load another document. The referrer may be evaluated by the addressed UCB content or the loaded document. Without a referrer the processing of URLs that needs security checks will be denied, f.e. "macro:" URLs.
Don't be confused about the wrong spelling; is kept for compatibility reasons.

*/ [optional,property] string Referer; //------------------------------------------------------------------------- /** let the document be opened in repair mode

For loading of corrupted zip packages: Setting this to let the document be opened in repair mode, so as much as possible information will be retrieved.

@since OpenOffice 1.1.2 */ [optional,property] boolean RepairPackage; //------------------------------------------------------------------------- /** can be used for status informations

Object implementing the XStatusIndicator interface that can be used to give status information (text or progress) for the task. The office provides a default implementation for it. It is not allowed to keep a reference to this object, even not in the loaded or stored components' copy of the MediaDescriptor provided by its arguments attribute.

*/ [optional,property] com::sun::star::task::XStatusIndicator StatusIndicator; //------------------------------------------------------------------------- /** allows to specify the URL that is used next time SaveAs dialog is opened

If the parameter is specified, the URL will be used by SaveAs dialog next time as target folder.

*/ [optional,property] string SuggestedSaveAsDir; //------------------------------------------------------------------------- /** allows to specify the suggested file name that is used next time SaveAs dialog is opened

If the parameter is specified, the file name will be suggested by SaveAs dialog next time.

*/ [optional,property] string SuggestedSaveAsName; //------------------------------------------------------------------------- /** name of the template instead of the URL

The logical name of a template to load. Together with the MediaDescriptor::TemplateRegion property it can be used instead of the URL of the template. Use always in conjunction with MediaDescriptor::TemplateRegionName.

*/ [optional,property] string TemplateName; //------------------------------------------------------------------------- /** name of the template instead of the URL

The logical name of a template to load. Together with the MediaDescriptor::TemplateRegion property it can be used instead of the URL of the template. Use always in conjunction with MediaDescriptor::TemplateRegionName.

*/ [optional,property] string TemplateRegionName; //------------------------------------------------------------------------- /** regulate using of compressing

For storing: Setting this to means, don't use a zip file to save the document, use a folder instead (only usable for UCB contents, that support folders). Default is .

*/ [optional,property] boolean Unpacked; //------------------------------------------------------------------------- /** URL of the document

The location of the component in URL syntax. It must be the full qualified URL and must include f.e. an optional MediaDescriptor::JumpMark too.

*/ [optional,property] string URL; //------------------------------------------------------------------------- /** storage version

For components supporting versioning: the number of the version to be loaded or saved. Default is zero and means: no version is created or loaded, the "main" document is processed.

*/ [optional,property] short Version; //------------------------------------------------------------------------- /** set special view state

Data to set a special view state after loading. The type depends on the component and is usually retrieved from a Controller object by its XController interface. Default is: no view data.

*/ [optional,property] any ViewData; //------------------------------------------------------------------------- /** id of the initial view

For components supporting different views: a number to define the view that should be constructed after loading. Default is: zero, and this should be treated by the component as the default view.

*/ [optional,property] short ViewId; //------------------------------------------------------------------------- /** should the macro be executed. the value should be one from MacroExecMode constant list. @since OpenOffice 1.1.2 */ [optional,property] short MacroExecutionMode; //------------------------------------------------------------------------- /** can the document be updated depending from links. the value should be one from UpdateDocMode constant list. @since OpenOffice 1.1.2 */ [optional,property] short UpdateDocMode; //------------------------------------------------------------------------- /** specifies the name of the view controller to create when loading a document

If this property is used when loading a document into a frame, then it specifies the name of the view controller to create. That is, the property is passed to the document's XModel2::createViewController method.
If the loaded document does not support the XModel2 interface, the property is ignored.

@see ::com::sun::star::frame::XModel2::createViewController @see ::com::sun::star::frame::XController2::ViewControllerName @since OpenOffice 3.0 */ [optional,property] string ViewControllerName; //------------------------------------------------------------------------- /** specifies the frame containing the document. May be empty. */ [optional,property] com::sun::star::frame::XFrame Frame; }; //============================================================================= }; }; }; }; #endif