*PPD-Adobe: "4.2" *% Adobe PostScript(R) Printer Description File *% For Lexmark Optra E310 Laser Printers *% Produced by Lexmark International, Inc. *% *% For use with Adobe (formerly Aldus) PageMaker *% *% WARNING: If you edit this file and use it with PageMaker, be sure to *% use an editor (such as DOS Edit) that does NOT add an end-of-file *% marker (hex 1A) when it stores the file *% *% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the content *% of the file is not altered in any way from its original form. *% *FormatVersion: "4.2" *FileVersion: "1.1" *LanguageVersion: English *LanguageEncoding: WindowsANSI *PCFileName: "LOPE310.PPD" *Product: "(Lexmark Optra E310 Laser Printer)" *PSVersion: "(2016)" *ModelName: "Lexmark Optra E310 Laser Printer" *ShortNickName: "Lexmark Optra E310 PS" *NickName: "Lexmark Optra E310 PS" *% ======== Installable Options ============ *OpenGroup: InstallableOptions/Options Installed *OpenUI *Flash/Flash Memory Card - Option: Boolean *DefaultFlash: False *Flash True/Installed: "" *Flash False/Not Installed: "" *CloseUI: *Flash *OpenUI *InstalledMemory/Printer Memory - Option: PickOne *DefaultInstalledMemory: 2Meg *InstalledMemory 2Meg/2 MB Printer Memory: "" *InstalledMemory 4Meg/4 MB Printer Memory: "" *InstalledMemory 6Meg/6 MB Printer Memory: "" *InstalledMemory 10Meg/10 MB Printer Memory: "" *InstalledMemory 18Meg/18 MB Printer Memory: "" *InstalledMemory 32Meg/32 or more MB Printer Memory: "" *CloseUI: *InstalledMemory *CloseGroup: InstallableOptions *%=========== User Constraints =================== *UIConstraints: *Resolution 300dpi *ImageEnhance True *UIConstraints: *ImageEnhance True *Smoothing True *UIConstraints: *JCLEconomode True *ImageEnhance True *% === Basic Capabilities ============ *LanguageLevel: "2" *Protocols: PJL TBCP *FreeVM: "376000" *VMOption 2Meg/2 MB Printer Memory: "376000" *VMOption 4Meg/4 MB Printer Memory: "910000" *VMOption 6Meg/6 MB Printer Memory: "1034000" *VMOption 10Meg/10 MB Printer Memory: "1290000" *VMOption 18Meg/18 MB Printer Memory: "2058000" *VMOption 32Meg/32 or more MB Printer Memory: "2058000" *ColorDevice: False *DefaultColorSpace: Gray *TTRasterizer: Type42 *?TTRasterizer:"" *FileSystem: True *?FileSystem: "" *VariablePaperSize: True *Throughput: "8" *Password: "0" *ExitServer: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *JobPatchFile 1: " /oldresourcestatus /resourcestatus load def /resourcestatus {dup /FontType eq {1 index 32 eq {pop pop false} {oldresourcestatus} ifelse} {oldresourcestatus} ifelse } bind def " *End *% === Job Control Language == *JCLBegin: "<1B>%-12345X@PJL JOB<0A>" *JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>" *JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X" *% === Resolution ============ *OpenUI *Resolution/Resolution: PickOne *DefaultResolution: 600dpi *OrderDependency: 100 AnySetup *Resolution *Resolution 300dpi/300 dpi: "<< /HWResolution [300 300] >> setpagedevice" *Resolution 600dpi/600 dpi: "<< /HWResolution [600 600] >> setpagedevice" *?Resolution: " save currentpagedevice /HWResolution get 0 get ( ) cvs print (dpi) = flush restore " *End *CloseUI: *Resolution *% === Halftone Information =============== *ScreenFreq: "60.0" *ScreenAngle: "45.0" *ResScreenFreq 300dpi: "60.0" *ResScreenAngle 300dpi: "45.0" *ResScreenFreq 600dpi: "60.0" *ResScreenAngle 600dpi: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Factory *Transfer Factory: "{ }" *Transfer Factory.Inverse: "{ 1 exch sub }" *% === Features === *JCLOpenUI *JCLDensity/Print Darkness: PickOne *DefaultJCLDensity: None *OrderDependency: 20 JCLSetup *JCLDensity *JCLDensity None/Printer's default: "" *JCLDensity VLIGHT/Very Light: "@PJL SET DENSITY = 1<0A>" *JCLDensity LIGHT/Light: "@PJL SET DENSITY = 2<0A>" *JCLDensity NORMAL/Normal: "@PJL SET DENSITY = 3<0A>" *JCLDensity DARK/Dark: "@PJL SET DENSITY = 4<0A>" *JCLDensity VDARK/Very Dark: "@PJL SET DENSITY = 5<0A>" *JCLCloseUI: *JCLDensity *JCLOpenUI *JCLEconomode/Toner Saver: PickOne *DefaultJCLEconomode: PrtSet *OrderDependency: 10 JCLSetup *JCLEconomode *JCLEconomode PrtSet/Printer Setting: "" *JCLEconomode True/On: "@PJL SET ECONOMODE = ON<0A>" *JCLEconomode False/Off: "@PJL SET ECONOMODE = OFF<0A>" *JCLCloseUI: *JCLEconomode *OpenUI *Smoothing/Smoothing: Boolean *DefaultSmoothing: False *OrderDependency: 120 AnySetup *Smoothing *Smoothing True/On: "<< /PostRenderingEnhanceDetails << /REValue 2 >> >> setpagedevice" *Smoothing False/Off: "<< /PostRenderingEnhanceDetails << /REValue 0 >> >> setpagedevice" *?Smoothing: " save currentpagedevice /PostRenderingEnhanceDetails get /REValue get dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush restore " *End *CloseUI: *Smoothing *OpenUI *ImageEnhance/1200 Image Quality: Boolean *DefaultImageEnhance: False *OrderDependency: 40 AnySetup *ImageEnhance *ImageEnhance True/On: " 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 1 put put setpagedevice" *End *ImageEnhance False/Off: " 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 0 put put setpagedevice" *End *CloseUI: *ImageEnhance *JCLOpenUI *JCLPictureGrade/PictureGrade: Boolean *DefaultJCLPictureGrade: PrtSet *OrderDependency: 10 JCLSetup *JCLPictureGrade *JCLPictureGrade PrtSet/Printer Setting:"" *JCLPictureGrade True/On: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = ON<0A>" *JCLPictureGrade False/Off: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = OFF<0A>" *JCLCloseUI: *JCLPictureGrade *OpenUI *MediaType/Media Type: PickOne *DefaultMediaType: None *OrderDependency: 140 AnySetup *MediaType *MediaType None/Printer Setting: "" *MediaType Plain/Plain Paper: "<< /MediaType (Plain) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType CardStock/Card Stock: "<< /MediaType (Card Stock) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Transparency/Transparency: "<< /MediaType (Transparency) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Labels/Labels: "<< /MediaType (Labels) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Bond/Bond: "<< /MediaType (Bond) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Letterhead/Letterhead: "<< /MediaType (Letterhead) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Preprint/Preprinted: "<< /MediaType (Preprinted) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Color/Colored Paper: "<< /MediaType (Color) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Env/Envelope: "<< /MediaType (Envelope) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom1/Custom Type 1: "<< /MediaType (Custom Type 1) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom2/Custom Type 2: "<< /MediaType (Custom Type 2) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom3/Custom Type 3: "<< /MediaType (Custom Type 3) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom4/Custom Type 4: "<< /MediaType (Custom Type 4) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom5/Custom Type 5: "<< /MediaType (Custom Type 5) /Policies << /MediaType 2 >> >> setpagedevice" *MediaType Custom6/Custom Type 6: "<< /MediaType (Custom Type 6) /Policies << /MediaType 2 >> >> setpagedevice" *CloseUI: *MediaType *JCLOpenUI *JCLPortRotation/Port Rotation: PickOne *DefaultJCLPortRotation: None *OrderDependency: 10 JCLSetup *JCLPortRotation *JCLPortRotation None/Printer's default: "" *JCLPortRotation True/On: "@PJL LPORTROTATE<0A>" *JCLCloseUI: *JCLPortRotation *OpenUI *LXCollate/Collate Copies: Boolean *DefaultLXCollate: False *OrderDependency: 150 AnySetup *LXCollate *LXCollate False/Off: "<< /Collate false >> setpagedevice" *LXCollate True/On: "<< /Collate true >> setpagedevice" *CloseUI: *LXCollate *% === Paper ========================================== *LandscapeOrientation: Plus90 *% **** Printable Area by key word **** *DefaultImageableArea: Letter *ImageableArea Letter: "12 12 600 780" *ImageableArea Legal: "12 12 600 996" *ImageableArea B5: "12 12 505 716" *ImageableArea A4: "10 12 584 829" *ImageableArea Executive: "12 12 510 744" *ImageableArea A5: "12 12 407 583" *ImageableArea Universal: "12 12 600 996" *ImageableArea Monarch: "13 13 267 528" *ImageableArea C9: "13 13 267 626" *ImageableArea Comm10: "13 13 284 672" *ImageableArea DL: "13 13 299 611" *ImageableArea C5: "13 13 447 636" *ImageableArea ISOB5: "13 13 486 696" *ImageableArea Other: "12 12 600 996" *?ImageableArea: " save /cvp { cvi ( ) cvs print ( ) print } bind def newpath clippath pathbbox 4 -2 roll exch 2 {ceiling cvp} repeat exch 2 {floor cvp} repeat flush restore " *End *% **** Physical paper dimensions by key word **** *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension B5: "516 729" *PaperDimension A4: "595 842" *PaperDimension Executive: "522 756" *PaperDimension A5: "420 595" *PaperDimension Universal: "612 1008" *PaperDimension Monarch: "279 540" *PaperDimension C9: "279 639" *PaperDimension Comm10: "297 684" *PaperDimension DL: "312 624" *PaperDimension C5: "459 649" *PaperDimension ISOB5: "499 708" *PaperDimension Other: "612 1008" *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter/Letter 8 1/2 x 11 in: " 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" *End *PageSize Legal/Legal 8 1/2 x 14 in: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageSize B5/B5 182 x 257 mm: " 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" *End *PageSize A4/A4 210 x 297 mm: " 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" *End *PageSize Executive/Executive 7 1/4 x 10 1/2 in: " 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" *End *PageSize A5/A5 148 x 210 mm: " 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice" *End *PageSize Universal/Universal 8 1/2 x 14 in: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageSize Monarch/7 3/4 Envelope 3 7/8 x 7 1/2 in: " 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" *End *PageSize C9/9 Envelope 3 7/8 x 8 7/8 in: " 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" *End *PageSize Comm10/10 Envelope 4 1/8 x 9 1/2 in: " 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" *End *PageSize DL/DL Envelope 110 x 220 mm: " 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" *End *PageSize C5/C5 Envelope 162 x 229 mm: " 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" *End *PageSize ISOB5/B5 Envelope 176 x 250 mm: " 2 dict dup /PageSize [499 708] put dup /ImagingBBox null put setpagedevice" *End *PageSize Other/Other Envelope 8 1/2 x 14 in: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *?PageSize: " save 14 dict dup /letter (Letter) put dup /legal (Legal) put dup /executivepage (Executive) put dup /a4 (A4) put dup /a5 (A5) put dup /b5 (B5) put dup /universal (Universal) put dup /3.875x7.5envelope (Monarch) put dup /3.875x8.875envelope (C9) put dup /4.125x9.5envelope (Comm10) put dup /110x220envelope (DL) put dup /162x229envelope (C5) put dup /176x250envelope (Envelope.499.708) put dup /otherenvelope (Envelope.612.1008) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. *% Usually used with input source selection rather than selection by size (AutoSelect). *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: " 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Legal: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageRegion B5: " 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" *End *PageRegion A4: " 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Executive: " 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" *End *PageRegion A5: " 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Universal: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Monarch: " 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" *End *PageRegion C9: " 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Comm10: " 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" *End *PageRegion DL: " 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" *End *PageRegion C5: " 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" *End *PageRegion ISOB5: " 2 dict dup /PageSize [499 708] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Other: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *CloseUI: *PageRegion *RequiresPageRegion All: True *% === Input Trays ======================================= *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: AutoSelect *InputSlot AutoSelect/Auto Select: " 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" *End *InputSlot Tray1/Tray 1: " 1 dict dup /ManualFeed false put setpagedevice 1 dict dup /MediaPosition null put setpagedevice currentpagedevice /InputAttributes get 0 get setpagedevice 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" *End *InputSlot Manual/Manual Paper: " 1 dict dup /ManualFeed true put setpagedevice 1 dict dup /MediaPosition null put setpagedevice 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" *End *?InputSlot: " save [ (Tray1) (Manual) ] statusdict /papertray get exec {get exec} stopped { pop pop (Unknown) } if = flush restore " *End *CloseUI: *InputSlot *% === Font Information ========================================== *DefaultFont: Courier *Font Courier: Standard "(001.000)" Standard ROM *Font Courier-Bold: Standard "(001.000)" Standard ROM *Font Courier-Oblique: Standard "(001.000)" Standard ROM *Font Courier-BoldOblique: Standard "(001.000)" Standard ROM *Font Times-Roman: Standard "(001.000)" Standard ROM *Font Times-Bold: Standard "(001.000)" Standard ROM *Font Times-Italic: Standard "(001.000)" Standard ROM *Font Times-BoldItalic: Standard "(001.000)" Standard ROM *Font Helvetica: Standard "(001.000)" Standard ROM *Font Helvetica-Bold: Standard "(001.000)" Standard ROM *Font Helvetica-Oblique: Standard "(001.000)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM *Font Symbol: Special "(001.000)" Standard ROM *Font AvantGarde-Book: Standard "(001.000)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM *Font AvantGarde-Demi: Standard "(001.000)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM *Font Bookman-Demi: Standard "(001.000)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM *Font Bookman-Light: Standard "(001.000)" Standard ROM *Font Bookman-LightItalic: Standard "(001.000)" Standard ROM *Font Helvetica-Light: Standard "(001.000)" Standard ROM *Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Black: Standard "(001.000)" Standard ROM *Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM *Font Palatino-Roman: Standard "(001.000)" Standard ROM *Font Palatino-Bold: Standard "(001.000)" Standard ROM *Font Palatino-Italic: Standard "(001.000)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM *Font ZapfDingbats: Special "(001.000)" Special ROM *?FontQuery: " save 4 dict begin /sv exch def /str (fonts/ ) def /st2 128 string def { count 0 gt { dup st2 cvs (/) print print (:) print dup FontDirectory exch known {pop (Yes)} { str exch st2 cvs dup length /len exch def 6 exch putinterval str 0 len 6 add getinterval mark exch { } st2 filenameforall counttomark 0 gt { cleartomark (Yes)}{cleartomark (No)}ifelse }ifelse = flush }{ exit } ifelse } bind loop (*) = flush sv end restore " *End *?FontList: " save 2 dict begin /sv exch def /str 128 string def FontDirectory { pop == } bind forall flush /filenameforall where { pop save (fonts/*) { dup length 6 sub 6 exch getinterval cvn == } bind str filenameforall flush restore } if (*) = flush sv end restore " *End *% Printer Messages (verbatim from printer): *Message: "%% exitserver: permanent state may be changed %%" *Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%" *Message: "\FontName\ not found, using Courier" *% Status (format: %% status: %% ) *Status: "Printer Busy" *Status: "Warming Up" *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "initializing" *Status: "not ready" *% Input Sources (format: %% status: ; source: %% ) *Source: "Serial" *Source: "Parallel" *Source: "Network" *% Printer Error (format: %% PrinterError: %%) *PrinterError: "Paper Jam" *PrinterError: "Wrong Paper Length" *PrinterError: "Invalid Manual Insertion" *PrinterError: "Change Size in Feeder" *PrinterError: "Change Size in Tray 1" *PrinterError: "Change Size in Tray 2" *PrinterError: "Paper Out or Feed Failure - Feed" *PrinterError: "Load Manual Envelope" *PrinterError: "Paper Out or Feed Failure - Tray 1" *PrinterError: "Paper Out or Feed Failure - Tray 2" *PrinterError: "Load Manual Paper" *PrinterError: "Output Bin Full" *PrinterError: "Cover Open/Cartridge Not Installed" *PrinterError: "Insufficient Memory" *PrinterError: "Complex Page" *PrinterError: "Default Storage Error" *PrinterError: "Defective Font Card Installed" *PrinterError: "Flash Full" *PrinterError: "ioerror" *PrinterError: "Flash Error" *PrinterError: "Duplex Not Attached" *PrinterError: "Duplex Cover Open" *PrinterError: "Scheduled Maintenance" *PrinterError: "Toner Low" *PrinterError: "Service Error" *% === Color Separation Information ===================== *DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) ===================== *ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0" *ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: " {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *% For 71 lpi / 600 dpi =============================== *ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667" *% For 116 lpi / 1200 dpi =================================================== *% [removed]*% End of PPD file for Lexmark Optra E310 Laser Printers