*PPD-Adobe: "4.3"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1995 Adobe Systems Incorporated. 
*% All Rights Reserved. 
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.3"
*FileVersion: "1.2"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Product: "(Phaser 350)"
*PSVersion: "(2015.105) 10"
*Manufacturer: "Tektronix"
*ModelName: "Tektronix Phaser 350"
*ShortNickName: "Tektronix Phaser 350"
*NickName: "Tektronix Phaser 350"
*PCFileName: "TK350171.PPD"

*% === Installable Options ===========
*OpenGroup: InstallableOptions/Options Installed

*OpenUI *InstalledMemory/Memory Configuration: PickOne
*DefaultInstalledMemory: 24Meg
*InstalledMemory None/Standard 8 MB RAM: ""
*InstalledMemory 12Meg/12 MB Total RAM: ""
*InstalledMemory 24Meg/24 MB Total RAM: ""
*?InstalledMemory: "
 currentsystemparams /RamSize get
 16#100000 div round cvi
 dup 14 lt
 { pop (None) } {2 string cvs print (Meg) } ifelse
 = flush"
*End
*CloseUI: *InstalledMemory

*OpenUI *Option1/Optional Hard Drive: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*?Option1: "
 save false
 (%disk?%)
 { currentdevparams dup /Writeable known
   { /Writeable get {pop true} if }  {pop} ifelse
 } 10 string /IODevice resourceforall
 {(True)}{(False)} ifelse = flush
 restore"
*End
*CloseUI: *Option1

*OpenUI *Option2/Optional Network Card: PickOne
*DefaultOption2: None
*Option2 None/Not Installed: ""
*Option2 P1/EtherTalk, NetWare and TCP/IP: ""
*Option2 P2/TokenTalk, NetWare and TCP/IP: ""
*Option2 P3/LocalTalk and Serial: ""
*?Option2: "
 (%EthernetPhysical%) /IODevice resourcestatus
 {pop pop (P1) }
 {
   (%LocalTalk%) /IODevice resourcestatus
   {pop pop (P3) }
   {
     (%TokenRingPhysical%) /IODevice resourcestatus
     {pop pop (P2) } { (None) } ifelse
   } ifelse
 } ifelse = flush"
*End
*CloseUI: *Option2

*OpenUI *Option3/Optional Lower Tray: Boolean
*DefaultOption3: False
*Option3 True/Installed: ""
*Option3 False/Not Installed: ""
*?Option3: "
currentpagedevice /InputAttributes get 1 known
{ (True) } { (False) } ifelse = flush"
*End
*CloseUI: *Option3

*CloseGroup: InstallableOptions

*% === Basic Device Capabilities ============
*LanguageLevel: "2"
*Protocols: BCP

*FreeVM: "16000000"
*VMOption None/Standard 8 MB RAM: "2300000"
*VMOption 12Meg/12 MB Total RAM: "6100000"
*VMOption 24Meg/24 MB Total RAM: "16000000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*AccurateScreensSupport: True
*SuggestedJobTimeout: "0"
*SuggestedWaitTimeout: "300"
*SuggestedManualFeedTimeout: "60"
*1284Modes Parallel: Compat Nibble
*1284DeviceID: "
  MANUFACTURER:Tektronix;COMMAND SET:Adobe Level 2 PostScript;
  MODEL:Phaser 350;CLASS:Printer;DESCRIPTION:
  Phaser 350 Color Page Printer, PostScript Level 2, Letter / A4 Size;
  COMPATIBLE_ID:"
*End
*TTRasterizer: Type42
*?TTRasterizer: "
 save
 42 /FontType resourcestatus
 { pop pop (Type42)} {pop pop (None)} ifelse = flush
 restore
 "
*End


*FileSystem: True
*?FileSystem: "
  save false
  (%disk?%)
  { currentdevparams dup /Writeable known
    { /Writeable get {pop true} if }  {pop} ifelse
  } 10 string /IODevice resourceforall
  {(True)}{(False)} ifelse = flush
  restore"
*End

*Throughput: "6"
*Password: "(0)"
*ExitServer: "
  count 0 eq
  { false } { true exch startjob } ifelse
  not
  { (WARNING: Cannot modify initial VM.) =
    (Missing or invalid password.) =
    (Please contact the author of this software.) = flush quit
  } if
"
*End
*Reset: "
  count 0 eq
  { false } { true exch startjob } ifelse
  not
  { (WARNING: Cannot reset printer.) =
    (Missing or invalid password.) =
    (Please contact the author of this software.) = flush quit
  } if
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush"
*End

*% === Constraints ===================
*%
*UIConstraints: *InstalledMemory None *OutputMode Enhanced
*UIConstraints: *InstalledMemory 12Meg *OutputMode Enhanced
*UIConstraints: *VMOption None *OutputMode Enhanced
*UIConstraints: *VMOption 12Meg *OutputMode Enhanced
*UIConstraints: *Option3 False *InputSlot Lower

*UIConstraints: *OutputMode Enhanced *InstalledMemory None
*UIConstraints: *OutputMode Enhanced *InstalledMemory 12Meg
*UIConstraints: *OutputMode Enhanced *VMOption None
*UIConstraints: *OutputMode Enhanced *VMOption 12Meg
*UIConstraints: *InputSlot Lower *Option3 False

*% Resolution/Print Quality Selection  ===================

*DefaultResolution: 300x300dpi

*SetResolution 300x300dpi : ""
*SetResolution 600x300dpi : ""

*OpenUI *OutputMode/Print Quality: PickOne
*OrderDependency: 40.0 AnySetup *OutputMode
*DefaultOutputMode: Standard
*OutputMode FastColor/Fast Color: "
 <<
   /HWResolution /Default /OutputDevice findresource /HWResolution get 0 get
 >> setpagedevice"
*End

*OutputMode Standard/Standard: "
<<
   /HWResolution /Default /OutputDevice findresource /HWResolution get 1 get
>> setpagedevice"
*End

*OutputMode Enhanced/Enhanced: "
<<
   /HWResolution /Default /OutputDevice findresource /HWResolution get
   dup length 1 sub get
>> setpagedevice"
*End

*?OutputMode: "
  currentpagedevice /HWResolution get 0 get dup 300 lt
    {
      pop (FastColor)
    }
    {
      300 gt
      {
        (Enhanced)
      }
      {
        (Standard)
      } ifelse
    } ifelse
    = flush"
*End
*CloseUI: *OutputMode

*% Halftone Information =================

*DefaultHalftoneType: 9
*ScreenFreq: "60.0"
*ScreenAngle: "0.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
 {180 mul cos exch 180 mul cos add 2 div} bind"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub } bind"

*% Tray Selection ============

*OpenUI *InputSlot: PickOne
*OrderDependency: 42.0 AnySetup *InputSlot
*DefaultInputSlot: Paper
*InputSlot Upper: "
  <<
    /MediaPosition 0
    /MediaType null
    /TraySwitch false
    /ManualFeed false
  >>  setpagedevice"
*End
*InputSlot Lower: "
  <<
    /MediaPosition 1
    /MediaType null
    /TraySwitch false
    /ManualFeed false
  >>  setpagedevice"
*End
*InputSlot Paper: "
  <<
    /MediaPosition null
    /MediaType (Paper)
    /TraySwitch true
    /ManualFeed false
  >>  setpagedevice"
*End
*InputSlot Transparency: "
  <<
      /MediaPosition null
      /MediaType (Transparency)
      /TraySwitch true
      /ManualFeed false
  >>  setpagedevice"
*End
*InputSlot ManualPaper/Manual Paper: "
  <<
    /MediaPosition null
    /MediaType (Paper)
    /TraySwitch false
    /ManualFeed true
  >>  setpagedevice"
*End
*InputSlot ManualTransparency/Manual Transparency: "
  <<
    /MediaPosition null
    /MediaType (Transparency)
    /TraySwitch false
    /ManualFeed true
  >>  setpagedevice"
*End
*?InputSlot: "
  save
  currentpagedevice /MediaPosition get
  dup null eq
  { pop currentpagedevice /MediaType get
    dup null eq
    { pop (Upper) }
    { dup (Paper) eq
      { pop currentpagedevice /ManualFeed get
        { (ManualPaper) }
        { (Paper) } ifelse
      }
      {
        (Transparency) eq
        { currentpagedevice /ManualFeed get
          { (ManualTransparency) }
          { (Transparency) } ifelse
        }
        { (Unknown) } ifelse
      } ifelse
    } ifelse
  }
  {
    dup 0 eq
    { pop (Upper) }
    { 1 eq
      { (Lower) }
      { (Unknown) } ifelse
    } ifelse
  } ifelse
  = flush restore"
*End
*CloseUI: *InputSlot

*% Paper Handling ===================

*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 44.0 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "<<  /PageSize [612 792] /ImagingBBox null
  >>  setpagedevice"
*End
*PageSize A4: "<<  /PageSize [595 842] /ImagingBBox null
  >>  setpagedevice"
*End
*?PageSize: "
  save currentpagedevice /PageSize get aload pop
  2 copy gt {exch} if (Unknown)
  <<
  [612 792] (Letter)
  [595 842] (A4) >>
  { exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and
  	{ exch pop exit } { pop } ifelse
  } bind forall = flush pop pop restore"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 46.0 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "<<  /PageSize [612 792] /ImagingBBox null
  >>  setpagedevice"
*End
*PageRegion A4: "<<  /PageSize [595 842] /ImagingBBox null
  >>  setpagedevice"
*End
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "14.16 25.8 597.84 777.96"
*ImageableArea A4: "13.45 25.81 581.76 827.88"
*?ImageableArea: "
<< /HWResolution [300 300] >> setpagedevice
  clippath pathbbox
  /cvp {16 string cvs print ( ) print} def
  4 3 roll 100 mul ceiling 100 div cvp
  3 2 roll 100 mul ceiling 100 div cvp
  exch 100 mul floor 100 div cvp
  100 mul floor 100 div = flush
  userdict /cvp undef"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension A4: "595 842"

*DefaultOutputOrder: Normal
*RequiresPageRegion All: True

*% TKColor Selections  ===================
*OpenUI *TKColor/Color Correction: PickOne
*OrderDependency: 50.0 AnySetup *TKColor
*DefaultTKColor: VividColor/Vivid Color
*TKColor NoAdjust/None: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice null
    >>
  >>  setpagedevice"
*End
*TKColor VividColor/Vivid Color: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 3
        /ColorTransform /TekBlue
      >>
    >>
   >>  setpagedevice"
*End
*TKColor SimulateDisplay/Simulate Display: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 3
        /ColorTransform /TekDisplay
      >>
    >>
   >>  setpagedevice"
*End
*TKColor SWOPPress/SWOP Press: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 3
        /ColorTransform /SWOP-Coated
      >>
    >>
   >>  setpagedevice"
*End
*TKColor EuroscalePress/Euroscale Press: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 3
        /ColorTransform /Euroscale-Coated
      >>
    >>
   >>  setpagedevice"
*End
*TKColor CommercialPress/Commercial Press: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 3
        /ColorTransform /Commercial-Coated
      >>
    >>
   >>  setpagedevice"
*End
*TKColor Monochrome: "
  <<
    /DeviceRenderingInfo <<
      /Type 2
      /VirtualColorDevice <<
        /Type 1
        /ColorTransform /Gray
      >>
    >>
   >>  setpagedevice"
*End
*TKColor UsePrinterSetting/Use Printer Setting: ""
*?TKColor: "save
  { currentpagedevice /DeviceRenderingInfo get
    /VirtualColorDevice get
    dup null eq
    { pop (NoAdjust) }
    { /ColorTransform get
      <<
        /TekBlue           (VividColor)
        /TekDisplay        (SimulateDisplay)
        /SWOP-Coated       (SWOPPress)
        /Euroscale-Coated  (EuroscalePress)
        /Commercial-Coated (CommercialPress)
        /Gray              (Monochrome)
      >>
      exch get
    } ifelse
  } stopped
  { % error in PostScript code execution
    pop pop (Unknown)
  } if
  = flush restore"
*End
*CloseUI: *TKColor

*OpenUI *TKImageSmoothing/Image Smoothing: Boolean
*OrderDependency: 52.0 AnySetup *TKImageSmoothing
*DefaultTKImageSmoothing: False
*TKImageSmoothing False: "
  false /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
*End
*TKImageSmoothing True: "
  true /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
*End
*?TKImageSmoothing: "
  save
  /RRCustomProcs /ProcSet findresource /currentforceinterpolate get exec
  {(True)}{(False)} ifelse
  = flush restore"
*End
*CloseUI: *TKImageSmoothing

*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*?FontQuery: "
  save
  { count 1 gt
    { exch dup 127 string cvs (/) print print (:) print
     /Font resourcestatus {pop pop (Yes)} {(No)} ifelse =
    } { exit } ifelse
  } bind loop
  (*) = flush restore"
*End

*?FontList: "
   save (*) {cvn ==} 128 string /Font resourceforall
   (*) = flush restore"
*End

*DefaultColorSep: ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300x300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"

*% The byte count of this file should be exactly 014657 or 015208
*% depending on the filesystem it resides in.
*% end of PPD file for Tektronix Phaser 350