/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sc.hxx" #include #include #include //------------------------------------------------------------------ //svdraw.hxx #define _SDR_NOITEMS #define _SDR_NOTOUCH #define _SDR_NOTRANSFORM #define _SI_NOSBXCONTROLS #define _VCONT_HXX #define _SI_NOOTHERFORMS #define _VCTRLS_HXX #define _SI_NOCONTROL #define _SETBRW_HXX #define _VCBRW_HXX #define _SI_NOSBXCONTROLS //------------------------------------------------------------------ #include "scitems.hxx" #include #include #include #include #include #include #include #define _ZFORLIST_DECLARE_TABLE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "formatsh.hxx" #include "sc.hrc" #include "globstr.hrc" #include "docsh.hxx" #include "patattr.hxx" #include "scmod.hxx" //CHINA001 #include "styledlg.hxx" #include "attrdlg.hrc" #include "stlpool.hxx" #include "stlsheet.hxx" #include "printfun.hxx" #include "docpool.hxx" #include "scresid.hxx" #include "tabvwsh.hxx" #include "undostyl.hxx" #define ScFormatShell #define TableFont #define FormatForSelection #include "scslots.hxx" #include "scabstdlg.hxx" //CHINA001 namespace { SvxCellHorJustify lclConvertSlotToHAlign( sal_uInt16 nSlot ) { SvxCellHorJustify eHJustify = SVX_HOR_JUSTIFY_STANDARD; switch( nSlot ) { case SID_ALIGN_ANY_HDEFAULT: eHJustify = SVX_HOR_JUSTIFY_STANDARD; break; case SID_ALIGN_ANY_LEFT: eHJustify = SVX_HOR_JUSTIFY_LEFT; break; case SID_ALIGN_ANY_HCENTER: eHJustify = SVX_HOR_JUSTIFY_CENTER; break; case SID_ALIGN_ANY_RIGHT: eHJustify = SVX_HOR_JUSTIFY_RIGHT; break; case SID_ALIGN_ANY_JUSTIFIED: eHJustify = SVX_HOR_JUSTIFY_BLOCK; break; default: DBG_ERRORFILE( "lclConvertSlotToHAlign - invalid slot" ); } return eHJustify; } SvxCellVerJustify lclConvertSlotToVAlign( sal_uInt16 nSlot ) { SvxCellVerJustify eVJustify = SVX_VER_JUSTIFY_STANDARD; switch( nSlot ) { case SID_ALIGN_ANY_VDEFAULT: eVJustify = SVX_VER_JUSTIFY_STANDARD; break; case SID_ALIGN_ANY_TOP: eVJustify = SVX_VER_JUSTIFY_TOP; break; case SID_ALIGN_ANY_VCENTER: eVJustify = SVX_VER_JUSTIFY_CENTER; break; case SID_ALIGN_ANY_BOTTOM: eVJustify = SVX_VER_JUSTIFY_BOTTOM; break; default: DBG_ERRORFILE( "lclConvertSlotToVAlign - invalid slot" ); } return eVJustify; } } // namespace TYPEINIT1( ScFormatShell, SfxShell ); SFX_IMPL_INTERFACE(ScFormatShell, SfxShell, ScResId(SCSTR_FORMATSHELL) ) { SFX_OBJECTBAR_REGISTRATION( SFX_OBJECTBAR_OBJECT | SFX_VISIBILITY_STANDARD | SFX_VISIBILITY_SERVER, ScResId(RID_OBJECTBAR_FORMAT)); } ScFormatShell::ScFormatShell(ScViewData* pData) : SfxShell(pData->GetViewShell()), pViewData(pData) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SetPool( &pTabViewShell->GetPool() ); ::svl::IUndoManager* pMgr = pViewData->GetSfxDocShell()->GetUndoManager(); SetUndoManager( pMgr ); if ( !pViewData->GetDocument()->IsUndoEnabled() ) { pMgr->SetMaxUndoActionCount( 0 ); } SetHelpId(HID_SCSHELL_FORMATSH); SetName(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("Format"))); } ScFormatShell::~ScFormatShell() { } //------------------------------------------------------------------ void __EXPORT ScFormatShell::GetStyleState( SfxItemSet& rSet ) { ScDocument* pDoc = GetViewData()->GetDocument(); ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SfxStyleSheetBasePool* pStylePool = pDoc->GetStyleSheetPool(); sal_Bool bProtected = sal_False; SCTAB nTabCount = pDoc->GetTableCount(); for (SCTAB i=0; iIsTabProtected(i)) // ueberhaupt eine Tabelle geschuetzt? bProtected = sal_True; SfxWhichIter aIter(rSet); sal_uInt16 nWhich = aIter.FirstWhich(); sal_uInt16 nSlotId = 0; while ( nWhich ) { nSlotId = SfxItemPool::IsWhich( nWhich ) ? GetPool().GetSlotId( nWhich ) : nWhich; switch ( nSlotId ) { case SID_STYLE_APPLY: if ( !pStylePool ) rSet.DisableItem( nSlotId ); break; case SID_STYLE_FAMILY2: // Zellvorlagen { SfxStyleSheet* pStyleSheet = (SfxStyleSheet*) pTabViewShell->GetStyleSheetFromMarked(); if ( pStyleSheet ) rSet.Put( SfxTemplateItem( nSlotId, pStyleSheet->GetName() ) ); else rSet.Put( SfxTemplateItem( nSlotId, String() ) ); } break; case SID_STYLE_FAMILY4: // Seitenvorlagen { SCTAB nCurTab = GetViewData()->GetTabNo(); String aPageStyle = pDoc->GetPageStyle( nCurTab ); SfxStyleSheet* pStyleSheet = (SfxStyleSheet*)pStylePool-> Find( aPageStyle, SFX_STYLE_FAMILY_PAGE ); if ( pStyleSheet ) rSet.Put( SfxTemplateItem( nSlotId, aPageStyle ) ); else rSet.Put( SfxTemplateItem( nSlotId, String() ) ); } break; case SID_STYLE_WATERCAN: { rSet.Put( SfxBoolItem( nSlotId, SC_MOD()->GetIsWaterCan() ) ); } break; case SID_STYLE_UPDATE_BY_EXAMPLE: { ISfxTemplateCommon* pDesigner = SFX_APP()-> GetCurrentTemplateCommon(pTabViewShell->GetViewFrame()->GetBindings()); sal_Bool bPage = pDesigner && SFX_STYLE_FAMILY_PAGE == pDesigner->GetActualFamily(); if ( bProtected || bPage ) rSet.DisableItem( nSlotId ); } break; case SID_STYLE_EDIT: case SID_STYLE_DELETE: { ISfxTemplateCommon* pDesigner = SFX_APP()-> GetCurrentTemplateCommon(pTabViewShell->GetViewFrame()->GetBindings()); sal_Bool bPage = pDesigner && SFX_STYLE_FAMILY_PAGE == pDesigner->GetActualFamily(); if ( bProtected && !bPage ) rSet.DisableItem( nSlotId ); } break; default: break; } nWhich = aIter.NextWhich(); } } //------------------------------------------------------------------ void __EXPORT ScFormatShell::ExecuteStyle( SfxRequest& rReq ) { // Wenn ToolBar vertikal : if ( !rReq.GetArgs() ) { pViewData->GetDispatcher().Execute( SID_STYLE_DESIGNER, SFX_CALLMODE_ASYNCHRON | SFX_CALLMODE_RECORD ); return; } //-------------------------------------------------------------------- SfxBindings& rBindings = pViewData->GetBindings(); const SfxItemSet* pArgs = rReq.GetArgs(); const sal_uInt16 nSlotId = rReq.GetSlot(); const SCTAB nCurTab = GetViewData()->GetTabNo(); ScDocShell* pDocSh = GetViewData()->GetDocShell(); ScTabViewShell* pTabViewShell= GetViewData()->GetViewShell(); ScDocument* pDoc = pDocSh->GetDocument(); ScMarkData& rMark = GetViewData()->GetMarkData(); ScModule* pScMod = SC_MOD(); String aRefName; sal_Bool bUndo = pDoc->IsUndoEnabled(); if ( (nSlotId == SID_STYLE_NEW) || (nSlotId == SID_STYLE_EDIT) || (nSlotId == SID_STYLE_DELETE) || (nSlotId == SID_STYLE_APPLY) || (nSlotId == SID_STYLE_WATERCAN) || (nSlotId == SID_STYLE_FAMILY) || (nSlotId == SID_STYLE_NEW_BY_EXAMPLE) || (nSlotId == SID_STYLE_UPDATE_BY_EXAMPLE) ) { SfxStyleSheetBasePool* pStylePool = pDoc->GetStyleSheetPool(); SfxStyleSheetBase* pStyleSheet = NULL; sal_Bool bStyleToMarked = sal_False; sal_Bool bListAction = sal_False; sal_Bool bAddUndo = sal_False; // add ScUndoModifyStyle (style modified) ScStyleSaveData aOldData; // for undo/redo ScStyleSaveData aNewData; SfxStyleFamily eFamily = SFX_STYLE_FAMILY_PARA; const SfxPoolItem* pFamItem; if ( pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_FAMILY, sal_True, &pFamItem ) ) eFamily = (SfxStyleFamily)((const SfxUInt16Item*)pFamItem)->GetValue(); else if ( pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_FAMILYNAME, sal_True, &pFamItem ) ) { String sFamily = ((const SfxStringItem*)pFamItem)->GetValue(); if (sFamily.CompareToAscii("CellStyles") == COMPARE_EQUAL) eFamily = SFX_STYLE_FAMILY_PARA; else if (sFamily.CompareToAscii("PageStyles") == COMPARE_EQUAL) eFamily = SFX_STYLE_FAMILY_PAGE; } String aStyleName; sal_uInt16 nRetMask = 0xffff; // #96983# only stylist sends focus to sheet // sal_Bool bGrabFocus = ( SID_STYLE_APPLY == nSlotId ); pStylePool->SetSearchMask( eFamily, SFXSTYLEBIT_ALL ); switch ( nSlotId ) { case SID_STYLE_NEW: { const SfxPoolItem* pNameItem; if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( nSlotId, sal_True, &pNameItem )) aStyleName = ((const SfxStringItem*)pNameItem)->GetValue(); const SfxPoolItem* pRefItem=NULL; if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_REFERENCE, sal_True, &pRefItem )) { if(pRefItem!=NULL) aRefName = ((const SfxStringItem*)pRefItem)->GetValue(); } pStyleSheet = &(pStylePool->Make( aStyleName, eFamily, SFXSTYLEBIT_USERDEF ) ); if ( pStyleSheet && pStyleSheet->HasParentSupport() ) pStyleSheet->SetParent(aRefName); } break; case SID_STYLE_APPLY: { SFX_REQUEST_ARG( rReq, pNameItem, SfxStringItem, SID_APPLY_STYLE, sal_False ); SFX_REQUEST_ARG( rReq, pFamilyItem, SfxStringItem, SID_STYLE_FAMILYNAME, sal_False ); if ( pFamilyItem && pNameItem ) { com::sun::star::uno::Reference< com::sun::star::style::XStyleFamiliesSupplier > xModel(pDocSh->GetModel(), com::sun::star::uno::UNO_QUERY); try { com::sun::star::uno::Reference< com::sun::star::container::XNameAccess > xStyles; com::sun::star::uno::Reference< com::sun::star::container::XNameAccess > xCont = xModel->getStyleFamilies(); xCont->getByName(pFamilyItem->GetValue()) >>= xStyles; com::sun::star::uno::Reference< com::sun::star::beans::XPropertySet > xInfo; xStyles->getByName( pNameItem->GetValue() ) >>= xInfo; ::rtl::OUString aUIName; xInfo->getPropertyValue( ::rtl::OUString::createFromAscii("DisplayName") ) >>= aUIName; if ( aUIName.getLength() ) rReq.AppendItem( SfxStringItem( SID_STYLE_APPLY, aUIName ) ); } catch( com::sun::star::uno::Exception& ) { } } } case SID_STYLE_EDIT: case SID_STYLE_DELETE: case SID_STYLE_NEW_BY_EXAMPLE: { const SfxPoolItem* pNameItem; if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( nSlotId, sal_True, &pNameItem )) aStyleName = ((const SfxStringItem*)pNameItem)->GetValue(); pStyleSheet = pStylePool->Find( aStyleName, eFamily ); aOldData.InitFromStyle( pStyleSheet ); } break; case SID_STYLE_WATERCAN: { sal_Bool bWaterCan = pScMod->GetIsWaterCan(); if( !bWaterCan ) { const SfxPoolItem* pItem; if ( SFX_ITEM_SET == pArgs->GetItemState( nSlotId, sal_True, &pItem ) ) { const SfxStringItem* pStrItem = PTR_CAST(SfxStringItem,pItem); if ( pStrItem ) { aStyleName = pStrItem->GetValue(); pStyleSheet = pStylePool->Find( aStyleName, eFamily ); if ( pStyleSheet ) { ((ScStyleSheetPool*)pStylePool)-> SetActualStyleSheet( pStyleSheet ); rReq.Done(); } } } } if ( !bWaterCan && pStyleSheet ) { pScMod->SetWaterCan( sal_True ); pTabViewShell->SetActivePointer( Pointer(POINTER_FILL) ); rReq.Done(); } else { pScMod->SetWaterCan( sal_False ); pTabViewShell->SetActivePointer( Pointer(POINTER_ARROW) ); rReq.Done(); } } break; default: break; } // Neuen Style fuer WaterCan-Mode setzen if ( nSlotId == SID_STYLE_APPLY && pScMod->GetIsWaterCan() && pStyleSheet ) ((ScStyleSheetPool*)pStylePool)->SetActualStyleSheet( pStyleSheet ); switch ( eFamily ) { case SFX_STYLE_FAMILY_PARA: { switch ( nSlotId ) { case SID_STYLE_DELETE: { if ( pStyleSheet ) { pTabViewShell->RemoveStyleSheetInUse( pStyleSheet ); pStylePool->Remove( pStyleSheet ); pTabViewShell->InvalidateAttribs(); nRetMask = sal_True; bAddUndo = sal_True; rReq.Done(); } else nRetMask = sal_False; } break; case SID_STYLE_APPLY: { if ( pStyleSheet && !pScMod->GetIsWaterCan() ) { // Anwenden der Vorlage auf das Dokument pTabViewShell->SetStyleSheetToMarked( (SfxStyleSheet*)pStyleSheet ); pTabViewShell->InvalidateAttribs(); rReq.Done(); } } break; case SID_STYLE_NEW_BY_EXAMPLE: case SID_STYLE_UPDATE_BY_EXAMPLE: { // Vorlage erzeugen/ersetzen durch Attribute // an der Cursor-Position: const ScPatternAttr* pAttrItem = NULL; // Die Abfrage, ob markiert ist, war hier immer falsch, // darum jetzt gar nicht mehr, und einfach vom Cursor. // Wenn Attribute aus der Selektion genommen werden sollen, // muss noch darauf geachtet werden, Items aus Vorlagen nicht // zu uebernehmen (GetSelectionPattern sammelt auch Items aus // Vorlagen zusammen) (#44748#) // pAttrItem = GetSelectionPattern(); // ScViewData* pViewData = GetViewData(); SCCOL nCol = pViewData->GetCurX(); SCROW nRow = pViewData->GetCurY(); pAttrItem = pDoc->GetPattern( nCol, nRow, nCurTab ); SfxItemSet aAttrSet = pAttrItem->GetItemSet(); aAttrSet.ClearItem( ATTR_MERGE ); aAttrSet.ClearItem( ATTR_MERGE_FLAG ); // bedingte Formatierung und Gueltigkeit nicht uebernehmen, // weil sie in der Vorlage nicht editiert werden koennen aAttrSet.ClearItem( ATTR_VALIDDATA ); aAttrSet.ClearItem( ATTR_CONDITIONAL ); if ( SID_STYLE_NEW_BY_EXAMPLE == nSlotId ) { if ( bUndo ) { String aUndo = ScGlobal::GetRscString( STR_UNDO_EDITCELLSTYLE ); pDocSh->GetUndoManager()->EnterListAction( aUndo, aUndo ); bListAction = sal_True; } sal_Bool bConvertBack = sal_False; SfxStyleSheet* pSheetInUse = (SfxStyleSheet*) pTabViewShell->GetStyleSheetFromMarked(); // wenn neuer Style vorhanden und in der Selektion // verwendet wird, so darf der Parent nicht uebernommen // werden: if ( pStyleSheet && pSheetInUse && pStyleSheet == pSheetInUse ) pSheetInUse = NULL; // wenn bereits vorhanden, erstmal entfernen... if ( pStyleSheet ) { // Style-Pointer zu Namen vor Erase, // weil Zellen sonst ungueltige Pointer // enthalten. //!!! bei Gelenheit mal eine Methode, die // das fuer einen bestimmten Style macht pDoc->StylesToNames(); bConvertBack = sal_True; pStylePool->Remove(pStyleSheet); } // ...und neu anlegen pStyleSheet = &pStylePool->Make( aStyleName, eFamily, SFXSTYLEBIT_USERDEF ); // wenn ein Style vorhanden ist, so wird dieser // Parent der neuen Vorlage: if ( pSheetInUse && pStyleSheet->HasParentSupport() ) pStyleSheet->SetParent( pSheetInUse->GetName() ); if ( bConvertBack ) // Namen zu Style-Pointer pDoc->UpdStlShtPtrsFrmNms(); else pDoc->GetPool()->CellStyleCreated( aStyleName ); // Attribute uebernehmen und Style anwenden pStyleSheet->GetItemSet().Put( aAttrSet ); pTabViewShell->UpdateStyleSheetInUse( pStyleSheet ); // call SetStyleSheetToMarked after adding the ScUndoModifyStyle // (pStyleSheet pointer is used!) bStyleToMarked = sal_True; } else // ( nSlotId == SID_STYLE_UPDATE_BY_EXAMPLE ) { pStyleSheet = (SfxStyleSheet*)pTabViewShell->GetStyleSheetFromMarked(); if ( pStyleSheet ) { aOldData.InitFromStyle( pStyleSheet ); if ( bUndo ) { String aUndo = ScGlobal::GetRscString( STR_UNDO_EDITCELLSTYLE ); pDocSh->GetUndoManager()->EnterListAction( aUndo, aUndo ); bListAction = sal_True; } pStyleSheet->GetItemSet().Put( aAttrSet ); pTabViewShell->UpdateStyleSheetInUse( pStyleSheet ); // call SetStyleSheetToMarked after adding the ScUndoModifyStyle // (pStyleSheet pointer is used!) bStyleToMarked = sal_True; } } aNewData.InitFromStyle( pStyleSheet ); bAddUndo = sal_True; rReq.Done(); } break; default: break; } } // case SFX_STYLE_FAMILY_PARA: break; case SFX_STYLE_FAMILY_PAGE: { switch ( nSlotId ) { case SID_STYLE_DELETE: { nRetMask = ( NULL != pStyleSheet ); if ( pStyleSheet ) { if ( pDoc->RemovePageStyleInUse( pStyleSheet->GetName() ) ) { ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nCurTab ).UpdatePages(); rBindings.Invalidate( SID_STATUS_PAGESTYLE ); rBindings.Invalidate( FID_RESET_PRINTZOOM ); } pStylePool->Remove( pStyleSheet ); rBindings.Invalidate( SID_STYLE_FAMILY4 ); pDocSh->SetDocumentModified(); bAddUndo = sal_True; rReq.Done(); } } break; case SID_STYLE_APPLY: { nRetMask = ( NULL != pStyleSheet ); if ( pStyleSheet && !pScMod->GetIsWaterCan() ) { ScUndoApplyPageStyle* pUndoAction = 0; for( SCTAB nTab = 0, nTabCount = pDoc->GetTableCount(); nTab < nTabCount; ++nTab ) { if( rMark.GetTableSelect( nTab ) ) { String aOldName = pDoc->GetPageStyle( nTab ); if ( aOldName != aStyleName ) { pDoc->SetPageStyle( nTab, aStyleName ); ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nTab ).UpdatePages(); if( !pUndoAction ) pUndoAction = new ScUndoApplyPageStyle( pDocSh, aStyleName ); pUndoAction->AddSheetAction( nTab, aOldName ); } } } if( pUndoAction ) { pDocSh->GetUndoManager()->AddUndoAction( pUndoAction ); pDocSh->SetDocumentModified(); rBindings.Invalidate( SID_STYLE_FAMILY4 ); rBindings.Invalidate( SID_STATUS_PAGESTYLE ); rBindings.Invalidate( FID_RESET_PRINTZOOM ); } rReq.Done(); } } break; case SID_STYLE_NEW_BY_EXAMPLE: { const String& rStrCurStyle = pDoc->GetPageStyle( nCurTab ); if ( rStrCurStyle != aStyleName ) { SfxStyleSheetBase* pCurStyle = pStylePool->Find( rStrCurStyle, eFamily ); SfxItemSet aAttrSet = pCurStyle->GetItemSet(); SCTAB nInTab; sal_Bool bUsed = pDoc->IsPageStyleInUse( aStyleName, &nInTab ); // wenn bereits vorhanden, erstmal entfernen... if ( pStyleSheet ) pStylePool->Remove( pStyleSheet ); // ...und neu anlegen pStyleSheet = &pStylePool->Make( aStyleName, eFamily, SFXSTYLEBIT_USERDEF ); // Attribute uebernehmen pStyleSheet->GetItemSet().Put( aAttrSet ); pDocSh->SetDocumentModified(); // wenn in Verwendung -> Update if ( bUsed ) ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nInTab ).UpdatePages(); aNewData.InitFromStyle( pStyleSheet ); bAddUndo = sal_True; rReq.Done(); nRetMask = sal_True; } } break; default: break; } // switch ( nSlotId ) } // case SFX_STYLE_FAMILY_PAGE: break; default: break; } // switch ( eFamily ) // Neu anlegen oder bearbeiten ueber Dialog: if ( nSlotId == SID_STYLE_NEW || nSlotId == SID_STYLE_EDIT ) { if ( pStyleSheet ) { SvxNumberInfoItem* pNumberInfoItem = NULL; SfxStyleFamily eFam = pStyleSheet->GetFamily(); // ScDocument* pDoc = GetViewData()->GetDocument(); // ScDocShell* pDocSh = GetViewData()->GetDocShell(); //CHINA001 ScStyleDlg* pDlg = NULL; SfxAbstractTabDialog* pDlg = NULL; //CHINA001 sal_uInt16 nRsc = 0; // #37034#/#37245# alte Items aus der Vorlage merken SfxItemSet aOldSet = pStyleSheet->GetItemSet(); String aOldName = pStyleSheet->GetName(); switch ( eFam ) { case SFX_STYLE_FAMILY_PAGE: nRsc = RID_SCDLG_STYLES_PAGE; break; case SFX_STYLE_FAMILY_PARA: default: { SfxItemSet& rSet = pStyleSheet->GetItemSet(); const SfxPoolItem* pItem; if ( rSet.GetItemState( ATTR_VALUE_FORMAT, sal_False, &pItem ) == SFX_ITEM_SET ) { // NumberFormat Value aus Value und Language // erzeugen und eintueten sal_uLong nFormat = ((SfxUInt32Item*)pItem)->GetValue(); LanguageType eLang = ((SvxLanguageItem*)&rSet.Get( ATTR_LANGUAGE_FORMAT ))->GetLanguage(); sal_uLong nLangFormat = pDoc->GetFormatTable()-> GetFormatForLanguageIfBuiltIn( nFormat, eLang ); if ( nLangFormat != nFormat ) { SfxUInt32Item aNewItem( ATTR_VALUE_FORMAT, nLangFormat ); rSet.Put( aNewItem ); aOldSet.Put( aNewItem ); // auch in aOldSet fuer Vergleich nach dem Dialog, // sonst geht evtl. eine Aenderung der Sprache verloren } } pTabViewShell->MakeNumberInfoItem( pDoc, GetViewData(), &pNumberInfoItem ); pDocSh->PutItem( *pNumberInfoItem ); nRsc = RID_SCDLG_STYLES_PAR; // auf jeden Fall ein SvxBoxInfoItem mit Table = sal_False im Set: // (wenn gar kein Item da ist, loescht der Dialog auch das // BORDER_OUTER SvxBoxItem aus dem Vorlagen-Set) if ( rSet.GetItemState( ATTR_BORDER_INNER, sal_False ) != SFX_ITEM_SET ) { SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER ); aBoxInfoItem.SetTable(sal_False); // keine inneren Linien aBoxInfoItem.SetDist(sal_True); aBoxInfoItem.SetMinDist(sal_False); rSet.Put( aBoxInfoItem ); } } break; } // If GetDefDialogParent is a dialog, it must be used // (style catalog) Window* pParent = Application::GetDefDialogParent(); if ( !pParent || !pParent->IsDialog() ) { // #107256# GetDefDialogParent currently doesn't return the window // that was set with SetDefDialogParent (but dynamically finds the // topmost parent of the focus window), so IsDialog above is FALSE // even if called from the style catalog. // -> Use NULL if a modal dialog is open, to enable the Dialog's // default parent handling. if ( Application::IsInModalMode() ) pParent = NULL; else pParent = pTabViewShell->GetDialogParent(); } pTabViewShell->SetInFormatDialog(sal_True); //CHINA001 pDlg = new ScStyleDlg( pParent, *pStyleSheet, nRsc ); ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create(); DBG_ASSERT(pFact, "ScAbstractFactory create fail!");//CHINA001 pDlg = pFact->CreateScStyleDlg( pParent, *pStyleSheet, nRsc, nRsc ); DBG_ASSERT(pDlg, "Dialog create fail!");//CHINA001 short nResult = pDlg->Execute(); pTabViewShell->SetInFormatDialog(sal_False); if ( nResult == RET_OK ) { const SfxItemSet* pOutSet = pDlg->GetOutputItemSet(); if ( pOutSet ) { nRetMask = pStyleSheet->GetMask(); // #37034#/#37245# Attribut-Vergleiche (frueher in ModifyStyleSheet) // jetzt hier mit den alten Werten (Style ist schon veraendert) if ( SFX_STYLE_FAMILY_PARA == eFam ) { // pDoc->CellStyleChanged( *pStyleSheet, aOldSet ); SfxItemSet& rNewSet = pStyleSheet->GetItemSet(); sal_Bool bNumFormatChanged; if ( ScGlobal::CheckWidthInvalidate( bNumFormatChanged, aOldSet, rNewSet ) ) pDoc->InvalidateTextWidth( NULL, NULL, bNumFormatChanged ); SCTAB nTabCount = pDoc->GetTableCount(); for (SCTAB nTab=0; nTabIsStreamValid(nTab)) pDoc->SetStreamValid(nTab, sal_False); sal_uLong nOldFormat = ((const SfxUInt32Item&)aOldSet. Get( ATTR_VALUE_FORMAT )).GetValue(); sal_uLong nNewFormat = ((const SfxUInt32Item&)rNewSet. Get( ATTR_VALUE_FORMAT )).GetValue(); if ( nNewFormat != nOldFormat ) { SvNumberFormatter* pFormatter = pDoc->GetFormatTable(); const SvNumberformat* pOld = pFormatter->GetEntry( nOldFormat ); const SvNumberformat* pNew = pFormatter->GetEntry( nNewFormat ); if ( pOld && pNew && pOld->GetLanguage() != pNew->GetLanguage() ) rNewSet.Put( SvxLanguageItem( pNew->GetLanguage(), ATTR_LANGUAGE_FORMAT ) ); } pDoc->GetPool()->CellStyleCreated( pStyleSheet->GetName() ); } else { //! auch fuer Seitenvorlagen die Abfragen hier String aNewName = pStyleSheet->GetName(); if ( aNewName != aOldName && pDoc->RenamePageStyleInUse( aOldName, aNewName ) ) { rBindings.Invalidate( SID_STATUS_PAGESTYLE ); rBindings.Invalidate( FID_RESET_PRINTZOOM ); } pDoc->ModifyStyleSheet( *pStyleSheet, *pOutSet ); rBindings.Invalidate( FID_RESET_PRINTZOOM ); } pDocSh->SetDocumentModified(); if ( SFX_STYLE_FAMILY_PARA == eFam ) { pTabViewShell->UpdateNumberFormatter( pDoc, (const SvxNumberInfoItem&) *(pDocSh->GetItem(SID_ATTR_NUMBERFORMAT_INFO)) ); pTabViewShell->UpdateStyleSheetInUse( pStyleSheet ); pTabViewShell->InvalidateAttribs(); } aNewData.InitFromStyle( pStyleSheet ); bAddUndo = sal_True; } } else { if ( nSlotId == SID_STYLE_NEW ) pStylePool->Remove( pStyleSheet ); else { // falls zwischendurch etwas mit dem temporaer geaenderten // ItemSet gepainted wurde: pDocSh->PostPaintGridAll(); } } delete pDlg; } } // if ( nRetMask != 0xffff )// Irgendein Wert MUSS geliefert werden JN rReq.SetReturnValue( SfxUInt16Item( nSlotId, nRetMask ) ); // #96983# only stylist sends focus to sheet // if ( bGrabFocus ) // pTabViewShell->GetActiveWin()->GrabFocus(); if ( bAddUndo && bUndo) pDocSh->GetUndoManager()->AddUndoAction( new ScUndoModifyStyle( pDocSh, eFamily, aOldData, aNewData ) ); if ( bStyleToMarked ) { // call SetStyleSheetToMarked after adding the ScUndoModifyStyle, // so redo will find the modified style pTabViewShell->SetStyleSheetToMarked( (SfxStyleSheet*)pStyleSheet ); pTabViewShell->InvalidateAttribs(); } if ( bListAction ) pDocSh->GetUndoManager()->LeaveListAction(); } else { DBG_ERROR( "Unknown slot (ScViewShell::ExecuteStyle)" ); } } void ScFormatShell::ExecuteNumFormat( SfxRequest& rReq ) { ScModule* pScMod = SC_MOD(); ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); const SfxItemSet* pReqArgs = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox // Eingabe beenden if ( GetViewData()->HasEditView( GetViewData()->GetActivePart() ) ) { switch ( nSlot ) { case SID_NUMBER_TWODEC: case SID_NUMBER_SCIENTIFIC: case SID_NUMBER_DATE: case SID_NUMBER_CURRENCY: case SID_NUMBER_PERCENT: case SID_NUMBER_STANDARD: case SID_NUMBER_FORMAT: case SID_NUMBER_INCDEC: case SID_NUMBER_DECDEC: case FID_DEFINE_NAME: case FID_USE_NAME: case FID_INSERT_NAME: case SID_SPELL_DIALOG: case SID_HANGUL_HANJA_CONVERSION: pScMod->InputEnterHandler(); pTabViewShell->UpdateInputHandler(); break; default: break; } } switch ( nSlot ) { case SID_NUMBER_TWODEC: pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER, 4 ); // Standard+4 = #.##0,00 rReq.Done(); break; case SID_NUMBER_SCIENTIFIC: pTabViewShell->SetNumberFormat( NUMBERFORMAT_SCIENTIFIC ); rReq.Done(); break; case SID_NUMBER_DATE: pTabViewShell->SetNumberFormat( NUMBERFORMAT_DATE ); rReq.Done(); break; case SID_NUMBER_TIME: pTabViewShell->SetNumberFormat( NUMBERFORMAT_TIME ); rReq.Done(); break; case SID_NUMBER_CURRENCY: pTabViewShell->SetNumberFormat( NUMBERFORMAT_CURRENCY ); rReq.Done(); break; case SID_NUMBER_PERCENT: pTabViewShell->SetNumberFormat( NUMBERFORMAT_PERCENT ); rReq.Done(); break; case SID_NUMBER_STANDARD: pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER ); rReq.Done(); break; case SID_NUMBER_INCDEC: pTabViewShell->ChangeNumFmtDecimals( sal_True ); rReq.Done(); break; case SID_NUMBER_DECDEC: pTabViewShell->ChangeNumFmtDecimals( sal_False ); rReq.Done(); break; case SID_NUMBER_FORMAT: //if ( pReqArgs ) //{ // const SfxPoolItem* pItem; // if(pReqArgs->GetItemState(nSlot, sal_True, &pItem) == SFX_ITEM_SET) // { // String aCode = ((const SfxStringItem*)pItem)->GetValue(); // pTabViewShell->SetNumFmtByStr( aCode ); // } //} // symphony version with format interpretation if(pReqArgs) { const SfxPoolItem* pItem; ScDocument* pDoc = pViewData->GetDocument(); SvNumberFormatter* pFormatter = pDoc->GetFormatTable(); LanguageType eLanguage = ScGlobal::eLnge; sal_Int16 eType = -1; sal_uInt32 nCurrentNumberFormat; pDoc->GetNumberFormat(pViewData->GetCurX(), pViewData->GetCurY(), pViewData->GetTabNo(), nCurrentNumberFormat); const SvNumberformat* pEntry = pFormatter->GetEntry(nCurrentNumberFormat); if(pEntry) { eLanguage = pEntry->GetLanguage(); eType = pEntry->GetType(); } //Just use eType to judge whether the command is fired for NUMBER/PERCENT/CURRENCY //In sidebar, users can fire SID_NUMBER_FORMAT command by operating the related UI controls before they are disable switch(eType) { case NUMBERFORMAT_ALL: case NUMBERFORMAT_NUMBER: case NUMBERFORMAT_NUMBER| NUMBERFORMAT_DEFINED: case NUMBERFORMAT_PERCENT: case NUMBERFORMAT_PERCENT| NUMBERFORMAT_DEFINED: case NUMBERFORMAT_CURRENCY: case NUMBERFORMAT_CURRENCY|NUMBERFORMAT_DEFINED: eType = 0; break; default: eType =-1; } if(SFX_ITEM_SET == pReqArgs->GetItemState(nSlot, true, &pItem) && eType != -1) { String aCode = ((const SfxStringItem*)pItem)->GetValue(); sal_uInt16 aLen = aCode.Len(); String* sFormat = new String[4]; String sTmpStr = String::CreateFromAscii(""); sal_uInt16 nCount(0); sal_uInt16 nStrCount(0); while(nCount < aLen) { sal_Unicode cChar = aCode.GetChar(nCount); if(cChar == sal_Unicode(',')) { sFormat[nStrCount] = sTmpStr; sTmpStr = String::CreateFromAscii(""); nStrCount++; } else { sTmpStr += cChar; } nCount++; if(nStrCount > 3) break; } const sal_Bool bThousand = (sal_Bool)sFormat[0].ToInt32(); const sal_Bool bNegRed = (sal_Bool)sFormat[1].ToInt32(); const sal_uInt16 nPrecision = (sal_uInt16)sFormat[2].ToInt32(); const sal_uInt16 nLeadZeroes = (sal_uInt16)sFormat[3].ToInt32(); pFormatter->GenerateFormat( aCode, nCurrentNumberFormat,//modify eLanguage, bThousand, bNegRed, nPrecision, nLeadZeroes); pTabViewShell->SetNumFmtByStr(aCode); delete[] sFormat; } } break; case SID_ATTR_NUMBERFORMAT_VALUE: if ( pReqArgs ) { const SfxPoolItem* pItem; if ( pReqArgs->GetItemState( ATTR_VALUE_FORMAT, sal_True, &pItem ) == SFX_ITEM_SET ) { // We have to accomplish this using ApplyAttributes() // because we also need the language information to be // considered. const SfxItemSet& rOldSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); SfxItemPool* pDocPool = GetViewData()->GetDocument()->GetPool(); SfxItemSet aNewSet( *pDocPool, ATTR_PATTERN_START, ATTR_PATTERN_END ); aNewSet.Put( *pItem ); pTabViewShell->ApplyAttributes( &aNewSet, &rOldSet, sal_True ); } } break; case SID_NUMBER_TYPE_FORMAT: { SfxInt16Item aFormatItem((const SfxInt16Item&)rReq.GetArgs()->Get(nSlot)); sal_uInt16 nFormat = aFormatItem.GetValue(); switch(nFormat) { case 0: pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER); //Modify break; case 1: pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER, 2 ); //Modify break; case 2: pTabViewShell->SetNumberFormat( NUMBERFORMAT_PERCENT ); break; case 3: pTabViewShell->SetNumberFormat( NUMBERFORMAT_CURRENCY ); break; case 4: pTabViewShell->SetNumberFormat( NUMBERFORMAT_DATE ); break; case 5: pTabViewShell->SetNumberFormat( NUMBERFORMAT_TIME ); break; case 6: pTabViewShell->SetNumberFormat( NUMBERFORMAT_SCIENTIFIC ); break; case 7: pTabViewShell->SetNumberFormat( NUMBERFORMAT_FRACTION ); break; case 8: pTabViewShell->SetNumberFormat( NUMBERFORMAT_LOGICAL ); break; case 9: pTabViewShell->SetNumberFormat( NUMBERFORMAT_TEXT ); break; default: ; } rReq.Done(); } break; default: DBG_ERROR("falscher Slot bei ExecuteEdit"); break; } } //------------------------------------------------------------------ #define APPLY_HOR_JUSTIFY(j) \ { \ if ( !pHorJustify || (eHorJustify != (j) ) ) \ pTabViewShell->ApplyAttr( SvxHorJustifyItem( (j) ) ); \ else \ pTabViewShell->ApplyAttr( SvxHorJustifyItem( SVX_HOR_JUSTIFY_STANDARD ) ); \ } #define APPLY_VER_JUSTIFY(j) \ { \ if ( !pVerJustify || (eVerJustify != (j) ) ) \ pTabViewShell->ApplyAttr( SvxVerJustifyItem( (j) ) ); \ else \ pTabViewShell->ApplyAttr( SvxVerJustifyItem( SVX_VER_JUSTIFY_STANDARD ) ); \ } void ScFormatShell::ExecuteAlignment( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SfxBindings& rBindings = pViewData->GetBindings(); const SfxItemSet* pSet = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox switch( nSlot ) { // pseudo slots for Format menu case SID_ALIGN_ANY_HDEFAULT: case SID_ALIGN_ANY_LEFT: case SID_ALIGN_ANY_HCENTER: case SID_ALIGN_ANY_RIGHT: case SID_ALIGN_ANY_JUSTIFIED: pTabViewShell->ApplyAttr( SvxHorJustifyItem( lclConvertSlotToHAlign( nSlot ), ATTR_HOR_JUSTIFY ) ); break; case SID_ALIGN_ANY_VDEFAULT: case SID_ALIGN_ANY_TOP: case SID_ALIGN_ANY_VCENTER: case SID_ALIGN_ANY_BOTTOM: pTabViewShell->ApplyAttr( SvxVerJustifyItem( lclConvertSlotToVAlign( nSlot ), ATTR_VER_JUSTIFY ) ); break; default: if( pSet ) { const SfxPoolItem* pItem = NULL; if( pSet->GetItemState(GetPool().GetWhich(nSlot), sal_True, &pItem ) == SFX_ITEM_SET ) { switch ( nSlot ) { case SID_ATTR_ALIGN_HOR_JUSTIFY: case SID_ATTR_ALIGN_VER_JUSTIFY: case SID_ATTR_ALIGN_INDENT: case SID_ATTR_ALIGN_HYPHENATION: case SID_ATTR_ALIGN_DEGREES: case SID_ATTR_ALIGN_LOCKPOS: case SID_ATTR_ALIGN_MARGIN: case SID_ATTR_ALIGN_STACKED: pTabViewShell->ApplyAttr( *pItem ); break; case SID_H_ALIGNCELL: { SvxCellHorJustify eJust = (SvxCellHorJustify)((const SvxHorJustifyItem*)pItem)->GetValue(); // #i78476# update alignment of text in cell edit mode pTabViewShell->UpdateInputHandlerCellAdjust( eJust ); pTabViewShell->ApplyAttr( SvxHorJustifyItem( eJust, ATTR_HOR_JUSTIFY ) ); } break; case SID_V_ALIGNCELL: pTabViewShell->ApplyAttr( SvxVerJustifyItem( (SvxCellVerJustify)((const SvxVerJustifyItem*)pItem)->GetValue(), ATTR_VER_JUSTIFY ) ); break; default: DBG_ERROR( "ExecuteAlignment: invalid slot" ); return; } } } } rBindings.Invalidate( SID_ATTR_PARA_ADJUST_LEFT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_RIGHT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_BLOCK ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_CENTER); rBindings.Invalidate( SID_ALIGNLEFT ); rBindings.Invalidate( SID_ALIGNRIGHT ); rBindings.Invalidate( SID_ALIGNCENTERHOR ); rBindings.Invalidate( SID_ALIGNBLOCK ); rBindings.Invalidate( SID_ALIGNTOP ); rBindings.Invalidate( SID_ALIGNBOTTOM ); rBindings.Invalidate( SID_ALIGNCENTERVER ); rBindings.Invalidate( SID_V_ALIGNCELL ); rBindings.Invalidate( SID_H_ALIGNCELL ); // pseudo slots for Format menu rBindings.Invalidate( SID_ALIGN_ANY_HDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_LEFT ); rBindings.Invalidate( SID_ALIGN_ANY_HCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_RIGHT ); rBindings.Invalidate( SID_ALIGN_ANY_JUSTIFIED ); rBindings.Invalidate( SID_ALIGN_ANY_VDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_TOP ); rBindings.Invalidate( SID_ALIGN_ANY_VCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_BOTTOM ); rBindings.Update(); if( ! rReq.IsAPI() ) rReq.Done(); } void ScFormatShell::ExecuteTextAttr( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SfxBindings& rBindings = pViewData->GetBindings(); const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern(); const SfxItemSet* pSet = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); SfxAllItemSet* pNewSet = 0; pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox if ( (nSlot == SID_ATTR_CHAR_WEIGHT) ||(nSlot == SID_ATTR_CHAR_POSTURE) ||(nSlot == SID_ATTR_CHAR_UNDERLINE) ||(nSlot == SID_ULINE_VAL_NONE) ||(nSlot == SID_ULINE_VAL_SINGLE) ||(nSlot == SID_ULINE_VAL_DOUBLE) ||(nSlot == SID_ULINE_VAL_DOTTED) ) { pNewSet = new SfxAllItemSet( GetPool() ); switch ( nSlot ) { case SID_ATTR_CHAR_WEIGHT: { // #i78017 establish the same behaviour as in Writer sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX; SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); if ( pSet ) aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_WEIGHT ) ); else { // toggle manually FontWeight eWeight = WEIGHT_BOLD; SvxScriptSetItem aOldSetItem( nSlot, rPool ); aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), sal_False ); const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript ); if ( pCore && ((const SvxWeightItem*)pCore)->GetWeight() == WEIGHT_BOLD ) eWeight = WEIGHT_NORMAL; aSetItem.PutItemForScriptType( nScript, SvxWeightItem( eWeight, ATTR_FONT_WEIGHT ) ); } pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); pNewSet->Put( aSetItem.GetItemSet(), sal_False ); } break; case SID_ATTR_CHAR_POSTURE: { // #i78017 establish the same behaviour as in Writer sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX; SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); if ( pSet ) aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_POSTURE ) ); else { // toggle manually FontItalic eItalic = ITALIC_NORMAL; SvxScriptSetItem aOldSetItem( nSlot, rPool ); aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), sal_False ); const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript ); if ( pCore && ((const SvxPostureItem*)pCore)->GetPosture() == ITALIC_NORMAL ) eItalic = ITALIC_NONE; aSetItem.PutItemForScriptType( nScript, SvxPostureItem( eItalic, ATTR_FONT_POSTURE ) ); } pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); pNewSet->Put( aSetItem.GetItemSet(), sal_False ); } break; case SID_ATTR_CHAR_UNDERLINE: { FontUnderline eUnderline; if( pSet ) { const SfxPoolItem& rUnderline = pSet->Get( ATTR_FONT_UNDERLINE ); if( rUnderline.ISA(SvxUnderlineItem) ) { pTabViewShell->ApplyAttr( rUnderline ); pNewSet->Put( rUnderline,rUnderline.Which() ); } else if ( rUnderline.ISA(SvxTextLineItem) ) { // #i106580# also allow SvxTextLineItem (base class of SvxUnderlineItem) const SvxTextLineItem& rTextLineItem = static_cast(rUnderline); SvxUnderlineItem aNewItem( rTextLineItem.GetLineStyle(), rTextLineItem.Which() ); aNewItem.SetColor( rTextLineItem.GetColor() ); pTabViewShell->ApplyAttr( aNewItem ); pNewSet->Put( aNewItem, aNewItem.Which() ); } } else { SvxUnderlineItem aUnderline( (const SvxUnderlineItem&) pAttrs->GetItem( ATTR_FONT_UNDERLINE ) ); eUnderline = (UNDERLINE_NONE != aUnderline.GetLineStyle()) ? UNDERLINE_NONE : UNDERLINE_SINGLE; aUnderline.SetLineStyle( eUnderline ); pTabViewShell->ApplyAttr( aUnderline ); pNewSet->Put( aUnderline,aUnderline.Which() ); } } break; case SID_ULINE_VAL_NONE: pTabViewShell->ApplyAttr( SvxUnderlineItem( UNDERLINE_NONE, ATTR_FONT_UNDERLINE ) ); break; case SID_ULINE_VAL_SINGLE: // Toggles case SID_ULINE_VAL_DOUBLE: case SID_ULINE_VAL_DOTTED: { FontUnderline eOld = ((const SvxUnderlineItem&) pAttrs->GetItem(ATTR_FONT_UNDERLINE)).GetLineStyle(); FontUnderline eNew = eOld; switch (nSlot) { case SID_ULINE_VAL_SINGLE: eNew = ( eOld == UNDERLINE_SINGLE ) ? UNDERLINE_NONE : UNDERLINE_SINGLE; break; case SID_ULINE_VAL_DOUBLE: eNew = ( eOld == UNDERLINE_DOUBLE ) ? UNDERLINE_NONE : UNDERLINE_DOUBLE; break; case SID_ULINE_VAL_DOTTED: eNew = ( eOld == UNDERLINE_DOTTED ) ? UNDERLINE_NONE : UNDERLINE_DOTTED; break; } pTabViewShell->ApplyAttr( SvxUnderlineItem( eNew, ATTR_FONT_UNDERLINE ) ); } break; default: break; } rBindings.Invalidate( nSlot ); } else { /* * "Selbstgemachte" RadioButton-Funktionalitaet * Beim Toggle gibt es den Standard-State, d.h. kein * Button ist gedrueckt */ const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); const SfxPoolItem* pItem = NULL; const SvxHorJustifyItem* pHorJustify = NULL; const SvxVerJustifyItem* pVerJustify = NULL; SvxCellHorJustify eHorJustify = SVX_HOR_JUSTIFY_STANDARD; SvxCellVerJustify eVerJustify = SVX_VER_JUSTIFY_STANDARD; if (rAttrSet.GetItemState(ATTR_HOR_JUSTIFY, sal_True,&pItem ) == SFX_ITEM_SET) { pHorJustify = (const SvxHorJustifyItem*)pItem; eHorJustify = SvxCellHorJustify( pHorJustify->GetValue() ); } if (rAttrSet.GetItemState(ATTR_VER_JUSTIFY, sal_True,&pItem ) == SFX_ITEM_SET) { pVerJustify = (const SvxVerJustifyItem*)pItem; eVerJustify = SvxCellVerJustify( pVerJustify->GetValue() ); } switch ( nSlot ) { case SID_ALIGNLEFT: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_LEFT) ? SVX_HOR_JUSTIFY_LEFT : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_LEFT ); //break; case SID_ALIGNRIGHT: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_RIGHT) ? SVX_HOR_JUSTIFY_RIGHT : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_RIGHT ); //break; case SID_ALIGNCENTERHOR: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_CENTER) ? SVX_HOR_JUSTIFY_CENTER : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_CENTER ); //break; case SID_ALIGNBLOCK: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_BLOCK) ? SVX_HOR_JUSTIFY_BLOCK : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_BLOCK ); //break; case SID_ALIGNTOP: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_TOP) ? SVX_VER_JUSTIFY_TOP : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_TOP ); //break; case SID_ALIGNBOTTOM: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_BOTTOM) ? SVX_VER_JUSTIFY_BOTTOM : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_BOTTOM ); //break; case SID_ALIGNCENTERVER: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_CENTER) ? SVX_VER_JUSTIFY_CENTER : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; // APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_CENTER ); //break; default: break; } } rBindings.Update(); // rReq.Done(); if( pNewSet ) { rReq.Done( *pNewSet ); delete pNewSet; } else { rReq.Done(); } } #undef APPLY_HOR_JUSTIFY #undef APPLY_VER_JUSTIFY //------------------------------------------------------------------ void ScFormatShell::ExecuteAttr( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SfxBindings& rBindings = pViewData->GetBindings(); const SfxItemSet* pNewAttrs = rReq.GetArgs(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox if ( !pNewAttrs ) { sal_uInt16 nSlot = rReq.GetSlot(); switch ( nSlot ) { case SID_ATTR_CHAR_FONT: case SID_ATTR_CHAR_FONTHEIGHT: pTabViewShell->ExecuteCellFormatDlg( rReq, TP_FONT ); // wenn ToolBar vertikal break; case SID_ATTR_ALIGN_LINEBREAK: // ohne Parameter als Toggle { const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern(); sal_Bool bOld = ((const SfxBoolItem&)pAttrs->GetItem(ATTR_LINEBREAK)).GetValue(); SfxBoolItem aBreakItem( ATTR_LINEBREAK, !bOld ); pTabViewShell->ApplyAttr( aBreakItem ); SfxAllItemSet aNewSet( GetPool() ); aNewSet.Put( aBreakItem,aBreakItem.Which() ); rReq.Done( aNewSet ); rBindings.Invalidate( nSlot ); } break; case SID_BACKGROUND_COLOR: { // SID_BACKGROUND_COLOR without arguments -> set transparent background SvxBrushItem aBrushItem( (const SvxBrushItem&) pTabViewShell->GetSelectionPattern()-> GetItem( ATTR_BACKGROUND ) ); aBrushItem.SetColor( COL_TRANSPARENT ); pTabViewShell->ApplyAttr( aBrushItem ); } break; } } else { sal_uInt16 nSlot = rReq.GetSlot(); switch ( nSlot ) { case SID_ATTR_CHAR_OVERLINE: case SID_ATTR_CHAR_STRIKEOUT: case SID_ATTR_ALIGN_LINEBREAK: case SID_ATTR_CHAR_COLOR: case SID_ATTR_CHAR_CONTOUR: case SID_ATTR_CHAR_SHADOWED: case SID_ATTR_CHAR_RELIEF: case SID_SCATTR_PROTECTION : pTabViewShell->ApplyAttr( pNewAttrs->Get( pNewAttrs->GetPool()->GetWhich( nSlot ) ) ); rBindings.Invalidate( nSlot ); rBindings.Update( nSlot ); break; case SID_ATTR_CHAR_FONT: case SID_ATTR_CHAR_FONTHEIGHT: { // #i78017 establish the same behaviour as in Writer sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX; if (nSlot == SID_ATTR_CHAR_FONT) nScript = pTabViewShell->GetSelectionScriptType(); SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); sal_uInt16 nWhich = rPool.GetWhich( nSlot ); aSetItem.PutItemForScriptType( nScript, pNewAttrs->Get( nWhich ) ); pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); rBindings.Invalidate( nSlot ); rBindings.Update( nSlot ); } break; case SID_FRAME_LINESTYLE: { // Default-Linie aktualisieren const SvxBorderLine* pLine = ((const SvxLineItem&) pNewAttrs->Get( SID_FRAME_LINESTYLE )). GetLine(); if ( pLine ) { SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); if ( pDefLine ) { pDefLine->SetOutWidth( pLine->GetOutWidth() ); pDefLine->SetInWidth ( pLine->GetInWidth() ); pDefLine->SetDistance( pLine->GetDistance() ); pTabViewShell->SetSelectionFrameLines( pDefLine, sal_False ); } else { pTabViewShell->SetDefaultFrameLine( pLine ); pTabViewShell->GetDefaultFrameLine()->SetColor( COL_BLACK ); pTabViewShell->SetSelectionFrameLines( pLine, sal_False ); } } else { Color aColorBlack( COL_BLACK ); SvxBorderLine aDefLine( &aColorBlack, 20, 0, 0 ); pTabViewShell->SetDefaultFrameLine( &aDefLine ); pTabViewShell->SetSelectionFrameLines( NULL, sal_False ); } } break; case SID_FRAME_LINECOLOR: { SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); const Color& rColor = ((const SvxColorItem&) pNewAttrs->Get( SID_FRAME_LINECOLOR )). GetValue(); // Default-Linie aktualisieren if ( pDefLine ) { pDefLine->SetColor( rColor ); pTabViewShell->SetSelectionFrameLines( pDefLine, sal_True ); } else { SvxBorderLine aDefLine( &rColor, 20, 0, 0 ); pTabViewShell->SetDefaultFrameLine( &aDefLine ); pTabViewShell->SetSelectionFrameLines( &aDefLine, sal_False ); } } break; case SID_ATTR_BORDER_OUTER: case SID_ATTR_BORDER: { SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern(); ScDocument* pDoc = GetViewData()->GetDocument(); SfxItemSet* pOldSet = new SfxItemSet( *(pDoc->GetPool()), ATTR_PATTERN_START, ATTR_PATTERN_END ); SfxItemSet* pNewSet = new SfxItemSet( *(pDoc->GetPool()), ATTR_PATTERN_START, ATTR_PATTERN_END ); const SfxPoolItem& rBorderAttr = pOldAttrs->GetItemSet(). Get( ATTR_BORDER ); // Border-Items vom Controller auswerten: const SfxPoolItem* pItem = 0; if ( pNewAttrs->GetItemState( ATTR_BORDER, sal_True, &pItem ) == SFX_ITEM_SET ) { // #100959# The SvxFrameToolBoxControl toolbox controller uses a default // SvxBorderLine (all widths 0) to mark the lines that should be set. // Macro recording uses a SvxBoxItem with the real values (OutWidth > 0) // or NULL pointers for no lines. // -> Substitute existing lines with pDefLine only if widths are 0. SvxBoxItem aBoxItem ( *(const SvxBoxItem*)pItem ); if ( aBoxItem.GetTop() && aBoxItem.GetTop()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, BOX_LINE_TOP ); if ( aBoxItem.GetBottom() && aBoxItem.GetBottom()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, BOX_LINE_BOTTOM ); if ( aBoxItem.GetLeft() && aBoxItem.GetLeft()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, BOX_LINE_LEFT ); if ( aBoxItem.GetRight() && aBoxItem.GetRight()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, BOX_LINE_RIGHT ); pNewSet->Put( aBoxItem ); rReq.AppendItem( aBoxItem ); } if ( pNewAttrs->GetItemState( ATTR_BORDER_INNER, sal_True, &pItem ) == SFX_ITEM_SET ) { SvxBoxInfoItem aBoxInfoItem( *(const SvxBoxInfoItem*)pItem ); if ( aBoxInfoItem.GetHori() && aBoxInfoItem.GetHori()->GetOutWidth() == 0 ) aBoxInfoItem.SetLine( pDefLine, BOXINFO_LINE_HORI ); if ( aBoxInfoItem.GetVert() && aBoxInfoItem.GetVert()->GetOutWidth() == 0 ) aBoxInfoItem.SetLine( pDefLine, BOXINFO_LINE_VERT ); pNewSet->Put( aBoxInfoItem ); rReq.AppendItem( aBoxInfoItem ); } else { SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER ); aBoxInfoItem.SetLine( NULL, BOXINFO_LINE_HORI ); aBoxInfoItem.SetLine( NULL, BOXINFO_LINE_VERT ); pNewSet->Put( aBoxInfoItem ); } pOldSet->Put( rBorderAttr ); pTabViewShell->ApplyAttributes( pNewSet, pOldSet ); delete pOldSet; delete pNewSet; } break; case SID_ATTR_BORDER_DIAG_TLBR: case SID_ATTR_BORDER_DIAG_BLTR: { ScDocument* pDoc = GetViewData()->GetDocument(); const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern(); SfxItemSet* pOldSet = new SfxItemSet(pOldAttrs->GetItemSet()); SfxItemSet* pNewSet = new SfxItemSet(pOldAttrs->GetItemSet()); const SfxPoolItem* pItem = 0; if(SID_ATTR_BORDER_DIAG_TLBR == nSlot) { if(SFX_ITEM_SET == pNewAttrs->GetItemState(ATTR_BORDER_TLBR, true, &pItem)) { SvxLineItem aItem(ATTR_BORDER_TLBR); aItem.SetLine(((const SvxLineItem&)pNewAttrs->Get(ATTR_BORDER_TLBR)).GetLine()); pNewSet->Put(aItem); rReq.AppendItem(aItem); pTabViewShell->ApplyAttributes(pNewSet, pOldSet); } } else // if( nSlot == SID_ATTR_BORDER_DIAG_BLTR ) { if(SFX_ITEM_SET == pNewAttrs->GetItemState(ATTR_BORDER_BLTR, true, &pItem )) { SvxLineItem aItem(ATTR_BORDER_BLTR); aItem.SetLine(((const SvxLineItem&)pNewAttrs->Get(ATTR_BORDER_BLTR)).GetLine()); pNewSet->Put(aItem); rReq.AppendItem(aItem); pTabViewShell->ApplyAttributes(pNewSet, pOldSet); } } delete pOldSet; delete pNewSet; rBindings.Invalidate(nSlot); } break; // ATTR_BACKGROUND (=SID_ATTR_BRUSH) muss ueber zwei IDs // gesetzt werden: case SID_BACKGROUND_COLOR: { const SvxColorItem rNewColorItem = (const SvxColorItem&) pNewAttrs->Get( SID_BACKGROUND_COLOR ); SvxBrushItem aBrushItem( (const SvxBrushItem&) pTabViewShell->GetSelectionPattern()-> GetItem( ATTR_BACKGROUND ) ); aBrushItem.SetColor( rNewColorItem.GetValue() ); pTabViewShell->ApplyAttr( aBrushItem ); } break; case SID_ATTR_BRUSH: { SvxBrushItem aBrushItem( (const SvxBrushItem&) pTabViewShell->GetSelectionPattern()-> GetItem( ATTR_BACKGROUND ) ); const SvxBrushItem& rNewBrushItem = (const SvxBrushItem&) pNewAttrs->Get( GetPool().GetWhich(nSlot) ); aBrushItem.SetColor(rNewBrushItem.GetColor()); pTabViewShell->ApplyAttr( aBrushItem ); } break; case SID_ATTR_BORDER_SHADOW: { const SvxShadowItem& rNewShadowItem = (const SvxShadowItem&) pNewAttrs->Get( ATTR_SHADOW ); pTabViewShell->ApplyAttr( rNewShadowItem ); } break; default: break; } if( ! rReq.IsAPI() ) if( ! rReq.IsDone() ) rReq.Done(); } } void ScFormatShell::GetAttrState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); const SvxBorderLine* pLine = pTabViewShell->GetDefaultFrameLine(); const SvxBrushItem& rBrushItem = (const SvxBrushItem&)rAttrSet.Get( ATTR_BACKGROUND ); SfxWhichIter aIter( rSet ); sal_uInt16 nWhich = aIter.FirstWhich(); rSet.Put( rAttrSet, sal_False ); // choose font info according to selection script type sal_uInt8 nScript = 0; // GetSelectionScriptType never returns 0 if ( rSet.GetItemState( ATTR_FONT ) != SFX_ITEM_UNKNOWN ) { if (!nScript) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT, nScript ); } if ( rSet.GetItemState( ATTR_FONT_HEIGHT ) != SFX_ITEM_UNKNOWN ) { if (!nScript) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_HEIGHT, nScript ); } while ( nWhich ) { switch(nWhich) { case SID_BACKGROUND_COLOR: { rSet.Put( SvxColorItem( rBrushItem.GetColor(), SID_BACKGROUND_COLOR ) ); if(SFX_ITEM_DONTCARE == rAttrSet.GetItemState(ATTR_BACKGROUND)) { rSet.InvalidateItem(SID_BACKGROUND_COLOR); } } break; case SID_FRAME_LINESTYLE: case SID_FRAME_LINECOLOR: { // handled together because both need the cell border information for decisions // rSet.Put( SvxColorItem( pLine ? pLine->GetColor() : Color(), SID_FRAME_LINECOLOR ) ); Color aCol = 0; sal_uInt16 nOut = 0, nIn = 0, nDis = 0; SvxBorderLine aLine(0,0,0,0); bool bCol = 0; bool bColDisable = 0, bStyleDisable = 0; SvxBoxItem aBoxItem(ATTR_BORDER); SvxBoxInfoItem aInfoItem(ATTR_BORDER_INNER); pTabViewShell->GetSelectionFrame(aBoxItem, aInfoItem); if( aBoxItem.GetTop() ) { bCol = 1; aCol = aBoxItem.GetTop()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aBoxItem.GetTop()->GetOutWidth()); aLine.SetInWidth( aBoxItem.GetTop()->GetInWidth()); aLine.SetDistance( aBoxItem.GetTop()->GetDistance()); } if( aBoxItem.GetBottom() ) { if(bCol == 0) { bCol = 1; aCol = aBoxItem.GetBottom()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aBoxItem.GetBottom()->GetOutWidth()); aLine.SetInWidth( aBoxItem.GetBottom()->GetInWidth()); aLine.SetDistance( aBoxItem.GetBottom()->GetDistance()); } else { if(aCol != aBoxItem.GetBottom()->GetColor() ) bColDisable = 1; if(!( aLine == *(aBoxItem.GetBottom())) ) bStyleDisable = 1; } } if( aBoxItem.GetLeft() ) { if(bCol == 0) { bCol = 1; aCol = aBoxItem.GetLeft()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aBoxItem.GetLeft()->GetOutWidth()); aLine.SetInWidth( aBoxItem.GetLeft()->GetInWidth()); aLine.SetDistance( aBoxItem.GetLeft()->GetDistance()); } else { if(aCol != aBoxItem.GetLeft()->GetColor() ) bColDisable = 1; if(!( aLine == *(aBoxItem.GetLeft())) ) bStyleDisable = 1; } } if( aBoxItem.GetRight() ) { if(bCol == 0) { bCol = 1; aCol = aBoxItem.GetRight()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aBoxItem.GetRight()->GetOutWidth()); aLine.SetInWidth( aBoxItem.GetRight()->GetInWidth()); aLine.SetDistance( aBoxItem.GetRight()->GetDistance()); } else { if(aCol != aBoxItem.GetRight()->GetColor() ) bColDisable = 1; if(!( aLine == *(aBoxItem.GetRight())) ) bStyleDisable = 1; } } if( aInfoItem.GetVert()) { if(bCol == 0) { bCol = 1; aCol = aInfoItem.GetVert()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aInfoItem.GetVert()->GetOutWidth()); aLine.SetInWidth( aInfoItem.GetVert()->GetInWidth()); aLine.SetDistance( aInfoItem.GetVert()->GetDistance()); } else { if(aCol != aInfoItem.GetVert()->GetColor() ) bColDisable = 1; if(!( aLine == *(aInfoItem.GetVert())) ) bStyleDisable = 1; } } if( aInfoItem.GetHori()) { if(bCol == 0) { bCol = 1; aCol = aInfoItem.GetHori()->GetColor() ; aLine.SetColor(aCol); aLine.SetOutWidth( aInfoItem.GetHori()->GetOutWidth()); aLine.SetInWidth( aInfoItem.GetHori()->GetInWidth()); aLine.SetDistance( aInfoItem.GetHori()->GetDistance()); } else { if(aCol != aInfoItem.GetHori()->GetColor() ) bColDisable = 1; if(!( aLine == *(aInfoItem.GetHori())) ) bStyleDisable = 1; } } if( !aInfoItem.IsValid( VALID_VERT ) || !aInfoItem.IsValid( VALID_HORI ) || !aInfoItem.IsValid( VALID_LEFT ) || !aInfoItem.IsValid( VALID_RIGHT ) || !aInfoItem.IsValid( VALID_TOP ) || !aInfoItem.IsValid( VALID_BOTTOM ) ) { bColDisable = 1; bStyleDisable = 1; } if(SID_FRAME_LINECOLOR == nWhich) { if(bColDisable) // if different lines have differernt colors { aCol = COL_TRANSPARENT; rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); rSet.InvalidateItem(SID_FRAME_LINECOLOR); } else if( bCol == 0 && bColDisable == 0) // if no line available { aCol = COL_AUTO; rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); } else rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); } else // if( nWhich == SID_FRAME_LINESTYLE) { if(bStyleDisable) // if have several lines but don't have same style { aLine.SetOutWidth( 1 ); aLine.SetInWidth( 0 ); aLine.SetDistance( 0 ); SvxLineItem aItem(SID_FRAME_LINESTYLE); aItem.SetLine(&aLine); rSet.Put( aItem ); rSet.InvalidateItem(SID_FRAME_LINESTYLE); } else // all the lines have same style or no line availavle, use initial value (0,0,0,0) { SvxLineItem aItem(SID_FRAME_LINESTYLE); aItem.SetLine(&aLine); rSet.Put( aItem ); } } } break; case SID_ATTR_BRUSH: { rSet.Put( rBrushItem, GetPool().GetWhich(nWhich) ); } break; /* case SID_ATTR_ALIGN_LINEBREAK: { const SfxBoolItem& rBreakItem = (const SfxBoolItem&)rAttrSet.Get( ATTR_LINEBREAK ); rSet.Put( rBreakItem, GetPool().GetWhich(nWhich) ); } break; */ } nWhich = aIter.NextWhich(); } if(nWhich) { // stuff for sidebar panels Invalidate(SID_ATTR_ALIGN_DEGREES); Invalidate(SID_ATTR_ALIGN_STACKED); } } //------------------------------------------------------------------ void ScFormatShell::GetTextAttrState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); rSet.Put( rAttrSet, sal_False ); // ItemStates mitkopieren // choose font info according to selection script type sal_uInt8 nScript = 0; // GetSelectionScriptType never returns 0 if ( rSet.GetItemState( ATTR_FONT_WEIGHT ) != SFX_ITEM_UNKNOWN ) { if (!nScript) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_WEIGHT, nScript ); } if ( rSet.GetItemState( ATTR_FONT_POSTURE ) != SFX_ITEM_UNKNOWN ) { if (!nScript) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_POSTURE, nScript ); } SfxItemState eState; // const SfxPoolItem* pItem; //-------------------------------------------------------------------- // eigene Kontrolle ueber RadioButton-Funktionalitaet: //-------------------------------------------------------------------- // Unterstreichung //------------------------ eState = rAttrSet.GetItemState( ATTR_FONT_UNDERLINE, sal_True ); if ( eState == SFX_ITEM_DONTCARE ) { rSet.InvalidateItem( SID_ULINE_VAL_NONE ); rSet.InvalidateItem( SID_ULINE_VAL_SINGLE ); rSet.InvalidateItem( SID_ULINE_VAL_DOUBLE ); rSet.InvalidateItem( SID_ULINE_VAL_DOTTED ); } else { FontUnderline eUnderline = ((const SvxUnderlineItem&) rAttrSet.Get(ATTR_FONT_UNDERLINE)).GetLineStyle(); sal_uInt16 nId = SID_ULINE_VAL_NONE; switch (eUnderline) { case UNDERLINE_SINGLE: nId = SID_ULINE_VAL_SINGLE; break; case UNDERLINE_DOUBLE: nId = SID_ULINE_VAL_DOUBLE; break; case UNDERLINE_DOTTED: nId = SID_ULINE_VAL_DOTTED; break; default: break; } rSet.Put( SfxBoolItem( nId, sal_True ) ); } //------------------------ // horizontale Ausrichtung //------------------------ const SvxHorJustifyItem* pHorJustify = NULL; const SvxVerJustifyItem* pVerJustify = NULL; SvxCellHorJustify eHorJustify = SVX_HOR_JUSTIFY_STANDARD; SvxCellVerJustify eVerJustify = SVX_VER_JUSTIFY_STANDARD; sal_uInt16 nWhich = 0; sal_Bool bJustifyStd = sal_False; SfxBoolItem aBoolItem ( 0, sal_True ); eState = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY, sal_True, (const SfxPoolItem**)&pHorJustify ); switch ( eState ) { case SFX_ITEM_SET: { eHorJustify = SvxCellHorJustify( pHorJustify->GetValue() ); switch ( SvxCellHorJustify( pHorJustify->GetValue() ) ) { case SVX_HOR_JUSTIFY_STANDARD: break; case SVX_HOR_JUSTIFY_LEFT: nWhich = SID_ALIGNLEFT; break; case SVX_HOR_JUSTIFY_RIGHT: nWhich = SID_ALIGNRIGHT; break; case SVX_HOR_JUSTIFY_CENTER: nWhich = SID_ALIGNCENTERHOR; break; case SVX_HOR_JUSTIFY_BLOCK: nWhich = SID_ALIGNBLOCK; break; case SVX_HOR_JUSTIFY_REPEAT: default: bJustifyStd = sal_True; break; } } break; case SFX_ITEM_DONTCARE: rSet.InvalidateItem( SID_ALIGNLEFT ); rSet.InvalidateItem( SID_ALIGNRIGHT ); rSet.InvalidateItem( SID_ALIGNCENTERHOR ); rSet.InvalidateItem( SID_ALIGNBLOCK ); break; default: bJustifyStd = sal_True; break; } if ( nWhich ) { aBoolItem.SetWhich( nWhich ); rSet.Put( aBoolItem ); } else if ( bJustifyStd ) { aBoolItem.SetValue( sal_False ); aBoolItem.SetWhich( SID_ALIGNLEFT ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNRIGHT ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNCENTERHOR ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNBLOCK ); rSet.Put( aBoolItem ); bJustifyStd = sal_False; } //------------------------ // vertikale Ausrichtung //------------------------ nWhich = 0; aBoolItem.SetValue( sal_True ); eState = rAttrSet.GetItemState( ATTR_VER_JUSTIFY, sal_True, (const SfxPoolItem**)&pVerJustify ); switch ( eState ) { case SFX_ITEM_SET: { eVerJustify = SvxCellVerJustify( pVerJustify->GetValue() ); switch ( eVerJustify ) { case SVX_VER_JUSTIFY_TOP: nWhich = SID_ALIGNTOP; break; case SVX_VER_JUSTIFY_BOTTOM: nWhich = SID_ALIGNBOTTOM; break; case SVX_VER_JUSTIFY_CENTER: nWhich = SID_ALIGNCENTERVER; break; case SVX_VER_JUSTIFY_STANDARD: default: bJustifyStd = sal_True; break; } } break; case SFX_ITEM_DONTCARE: rSet.InvalidateItem( SID_ALIGNTOP ); rSet.InvalidateItem( SID_ALIGNBOTTOM ); rSet.InvalidateItem( SID_ALIGNCENTERVER ); break; default: bJustifyStd = sal_True; break; } if ( nWhich ) { aBoolItem.SetWhich( nWhich ); rSet.Put( aBoolItem ); } else if ( bJustifyStd ) { aBoolItem.SetValue( sal_False ); aBoolItem.SetWhich( SID_ALIGNTOP ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNBOTTOM ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNCENTERVER ); rSet.Put( aBoolItem ); } } //------------------------------------------------------------------ void ScFormatShell::GetBorderState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SvxBoxItem aBoxItem( ATTR_BORDER ); SvxBoxInfoItem aInfoItem( ATTR_BORDER_INNER ); pTabViewShell->GetSelectionFrame( aBoxItem, aInfoItem ); if ( rSet.GetItemState( ATTR_BORDER ) != SFX_ITEM_UNKNOWN ) rSet.Put( aBoxItem ); if ( rSet.GetItemState( ATTR_BORDER_INNER ) != SFX_ITEM_UNKNOWN ) rSet.Put( aInfoItem ); } //------------------------------------------------------------------ void ScFormatShell::GetAlignState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); SfxWhichIter aIter(rSet); sal_uInt16 nWhich = aIter.FirstWhich(); SvxCellHorJustify eHAlign = SVX_HOR_JUSTIFY_STANDARD; bool bHasHAlign = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY ) != SFX_ITEM_DONTCARE; if( bHasHAlign ) eHAlign = (SvxCellHorJustify)((const SvxHorJustifyItem&) rAttrSet.Get( ATTR_HOR_JUSTIFY )).GetValue(); SvxCellVerJustify eVAlign = SVX_VER_JUSTIFY_STANDARD; bool bHasVAlign = rAttrSet.GetItemState( ATTR_VER_JUSTIFY ) != SFX_ITEM_DONTCARE; if( bHasVAlign ) eVAlign = (SvxCellVerJustify)((const SvxVerJustifyItem&) rAttrSet.Get( ATTR_VER_JUSTIFY )).GetValue(); while ( nWhich ) { switch ( nWhich ) { case SID_H_ALIGNCELL: if ( bHasHAlign ) rSet.Put( SvxHorJustifyItem( eHAlign, nWhich )); break; case SID_V_ALIGNCELL: if ( bHasVAlign ) rSet.Put( SvxVerJustifyItem( eVAlign, nWhich )); break; // pseudo slots for Format menu case SID_ALIGN_ANY_HDEFAULT: case SID_ALIGN_ANY_LEFT: case SID_ALIGN_ANY_HCENTER: case SID_ALIGN_ANY_RIGHT: case SID_ALIGN_ANY_JUSTIFIED: rSet.Put( SfxBoolItem( nWhich, bHasHAlign && (eHAlign == lclConvertSlotToHAlign( nWhich )) ) ); break; case SID_ALIGN_ANY_VDEFAULT: case SID_ALIGN_ANY_TOP: case SID_ALIGN_ANY_VCENTER: case SID_ALIGN_ANY_BOTTOM: rSet.Put( SfxBoolItem( nWhich, bHasVAlign && (eVAlign == lclConvertSlotToVAlign( nWhich )) ) ); break; } nWhich = aIter.NextWhich(); } } void ScFormatShell::GetNumFormatState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); // ScViewData* pViewData = GetViewData(); ScDocument* pDoc = pViewData->GetDocument(); SfxWhichIter aIter(rSet); sal_uInt16 nWhich = aIter.FirstWhich(); while ( nWhich ) { switch ( nWhich ) { case SID_NUMBER_FORMAT: //{ // String aFormatCode; // bleibt leer, wenn dont-care // // const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); // if ( rAttrSet.GetItemState( ATTR_VALUE_FORMAT ) != SFX_ITEM_DONTCARE ) // { // sal_uLong nNumberFormat = ((const SfxUInt32Item&)rAttrSet.Get( // ATTR_VALUE_FORMAT )).GetValue(); // // SvNumberFormatter* pFormatter = pDoc->GetFormatTable(); // const SvNumberformat* pFormatEntry = pFormatter->GetEntry( nNumberFormat ); // if ( pFormatEntry ) // aFormatCode = pFormatEntry->GetFormatstring(); // } // // rSet.Put( SfxStringItem( nWhich, aFormatCode ) ); //} // symphony version with format interpretation { const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); if(SFX_ITEM_DONTCARE != rAttrSet.GetItemState(ATTR_VALUE_FORMAT)) { SvNumberFormatter* pFormatter = pDoc->GetFormatTable(); sal_uInt32 nNumberFormat = ((const SfxUInt32Item&)rAttrSet.Get(ATTR_VALUE_FORMAT)).GetValue(); sal_Bool bThousand(false); sal_Bool bNegRed(false); sal_uInt16 nPrecision(0); sal_uInt16 nLeadZeroes(0); pFormatter->GetFormatSpecialInfo(nNumberFormat,bThousand, bNegRed, nPrecision, nLeadZeroes); String aFormat; static String sBreak = String::CreateFromAscii(","); const String sThousand = String::CreateFromInt32(bThousand); const String sNegRed = String::CreateFromInt32(bNegRed); const String sPrecision = String::CreateFromInt32(nPrecision); const String sLeadZeroes = String::CreateFromInt32(nLeadZeroes); aFormat += sThousand; aFormat += sBreak; aFormat += sNegRed; aFormat += sBreak; aFormat += sPrecision; aFormat += sBreak; aFormat += sLeadZeroes; aFormat += sBreak; rSet.Put(SfxStringItem(nWhich, aFormat)); } else { rSet.InvalidateItem( nWhich ); } } break; case SID_NUMBER_TYPE_FORMAT: { sal_Int16 aFormatCode = -1; const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); if ( rAttrSet.GetItemState( ATTR_VALUE_FORMAT ) >= SFX_ITEM_AVAILABLE ) //Modify for more robust { SvNumberFormatter* pFormatter = pDoc->GetFormatTable(); sal_uInt32 nNumberFormat = pTabViewShell->GetSelectionPattern()->GetNumberFormat( pFormatter ); const SvNumberformat* pFormatEntry = pFormatter->GetEntry( nNumberFormat ); bool bStandard = false; if ( pFormatEntry ) { aFormatCode = pFormatEntry->GetType(); bStandard = pFormatEntry->IsStandard(); } switch(aFormatCode) { case NUMBERFORMAT_NUMBER: case NUMBERFORMAT_NUMBER| NUMBERFORMAT_DEFINED: //use format code and standard format code to judge whether it is General, //if (nNumberFormat == nStandardNumberFormat) if (bStandard) aFormatCode = 0; else aFormatCode = 1; break; case NUMBERFORMAT_PERCENT: case NUMBERFORMAT_PERCENT| NUMBERFORMAT_DEFINED: aFormatCode = 2; break; case NUMBERFORMAT_CURRENCY: case NUMBERFORMAT_CURRENCY| NUMBERFORMAT_DEFINED: aFormatCode = 3; break; case NUMBERFORMAT_DATE: case NUMBERFORMAT_DATE| NUMBERFORMAT_DEFINED: //Add case NUMBERFORMAT_DATETIME: case NUMBERFORMAT_DATETIME | NUMBERFORMAT_DEFINED: aFormatCode = 4; break; case NUMBERFORMAT_TIME: case NUMBERFORMAT_TIME| NUMBERFORMAT_DEFINED: aFormatCode = 5; break; case NUMBERFORMAT_SCIENTIFIC: case NUMBERFORMAT_SCIENTIFIC| NUMBERFORMAT_DEFINED: aFormatCode = 6; break; case NUMBERFORMAT_FRACTION: case NUMBERFORMAT_FRACTION| NUMBERFORMAT_DEFINED: aFormatCode = 7; break; case NUMBERFORMAT_LOGICAL: case NUMBERFORMAT_LOGICAL| NUMBERFORMAT_DEFINED: aFormatCode = 8; break; case NUMBERFORMAT_TEXT: case NUMBERFORMAT_TEXT| NUMBERFORMAT_DEFINED: aFormatCode = 9; break; default: aFormatCode = -1; //for more roburst } if( aFormatCode == -1 ) rSet.InvalidateItem( nWhich ); else rSet.Put( SfxInt16Item( nWhich, aFormatCode ) ); } else { rSet.InvalidateItem( nWhich ); } } break; } nWhich = aIter.NextWhich(); } } void ScFormatShell::ExecuteTextDirection( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox if ( GetViewData()->HasEditView( GetViewData()->GetActivePart() ) ) { SC_MOD()->InputEnterHandler(); pTabViewShell->UpdateInputHandler(); } sal_uInt16 nSlot = rReq.GetSlot(); switch( nSlot ) { case SID_TEXTDIRECTION_LEFT_TO_RIGHT: case SID_TEXTDIRECTION_TOP_TO_BOTTOM: { sal_Bool bVert = (nSlot == SID_TEXTDIRECTION_TOP_TO_BOTTOM); ScPatternAttr aAttr( GetViewData()->GetDocument()->GetPool() ); SfxItemSet& rItemSet = aAttr.GetItemSet(); rItemSet.Put( SfxBoolItem( ATTR_STACKED, bVert ) ); rItemSet.Put( SfxBoolItem( ATTR_VERTICAL_ASIAN, bVert ) ); pTabViewShell->ApplySelectionPattern( aAttr ); pTabViewShell->AdjustBlockHeight(); } break; case SID_ATTR_PARA_LEFT_TO_RIGHT: case SID_ATTR_PARA_RIGHT_TO_LEFT: { SvxFrameDirection eDirection = ( nSlot == SID_ATTR_PARA_LEFT_TO_RIGHT ) ? FRMDIR_HORI_LEFT_TOP : FRMDIR_HORI_RIGHT_TOP; pTabViewShell->ApplyAttr( SvxFrameDirectionItem( eDirection, ATTR_WRITINGDIR ) ); } break; } } void ScFormatShell::GetTextDirectionState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); sal_Bool bVertDontCare = (rAttrSet.GetItemState( ATTR_VERTICAL_ASIAN ) == SFX_ITEM_DONTCARE) || (rAttrSet.GetItemState( ATTR_STACKED ) == SFX_ITEM_DONTCARE); sal_Bool bLeftRight = !bVertDontCare && !((const SfxBoolItem&) rAttrSet.Get( ATTR_STACKED )).GetValue(); sal_Bool bTopBottom = !bVertDontCare && !bLeftRight && ((const SfxBoolItem&) rAttrSet.Get( ATTR_VERTICAL_ASIAN )).GetValue(); sal_Bool bBidiDontCare = (rAttrSet.GetItemState( ATTR_WRITINGDIR ) == SFX_ITEM_DONTCARE); EEHorizontalTextDirection eBidiDir = EE_HTEXTDIR_DEFAULT; if ( !bBidiDontCare ) { SvxFrameDirection eCellDir = (SvxFrameDirection)((const SvxFrameDirectionItem&) rAttrSet.Get( ATTR_WRITINGDIR )).GetValue(); if ( eCellDir == FRMDIR_ENVIRONMENT ) eBidiDir = (EEHorizontalTextDirection)GetViewData()->GetDocument()-> GetEditTextDirection( GetViewData()->GetTabNo() ); else if ( eCellDir == FRMDIR_HORI_RIGHT_TOP ) eBidiDir = EE_HTEXTDIR_R2L; else eBidiDir = EE_HTEXTDIR_L2R; } SvtLanguageOptions aLangOpt; sal_Bool bDisableCTLFont = !aLangOpt.IsCTLFontEnabled(); sal_Bool bDisableVerticalText = !aLangOpt.IsVerticalTextEnabled(); SfxWhichIter aIter( rSet ); sal_uInt16 nWhich = aIter.FirstWhich(); while( nWhich ) { switch( nWhich ) { case SID_TEXTDIRECTION_LEFT_TO_RIGHT: case SID_TEXTDIRECTION_TOP_TO_BOTTOM: if ( bDisableVerticalText ) rSet.DisableItem( nWhich ); else { if( bVertDontCare ) rSet.InvalidateItem( nWhich ); else if ( nWhich == SID_TEXTDIRECTION_LEFT_TO_RIGHT ) rSet.Put( SfxBoolItem( nWhich, bLeftRight ) ); else rSet.Put( SfxBoolItem( nWhich, bTopBottom ) ); } break; case SID_ATTR_PARA_LEFT_TO_RIGHT: case SID_ATTR_PARA_RIGHT_TO_LEFT: if ( bDisableCTLFont ) rSet.DisableItem( nWhich ); else { if ( bTopBottom ) rSet.DisableItem( nWhich ); else if ( bBidiDontCare ) rSet.InvalidateItem( nWhich ); else if ( nWhich == SID_ATTR_PARA_LEFT_TO_RIGHT ) rSet.Put( SfxBoolItem( nWhich, eBidiDir == EE_HTEXTDIR_L2R ) ); else rSet.Put( SfxBoolItem( nWhich, eBidiDir == EE_HTEXTDIR_R2L ) ); } } nWhich = aIter.NextWhich(); } } void ScFormatShell::ExecFormatPaintbrush( SfxRequest& rReq ) { ScViewFunc* pView = pViewData->GetView(); if ( pView->HasPaintBrush() ) { // cancel paintbrush mode pView->ResetBrushDocument(); } else { sal_Bool bLock = sal_False; const SfxItemSet *pArgs = rReq.GetArgs(); if( pArgs && pArgs->Count() >= 1 ) bLock = static_cast(pArgs->Get(SID_FORMATPAINTBRUSH)).GetValue(); // in case of multi selection, deselect all and use the cursor position ScRange aDummy; if ( pViewData->GetSimpleArea(aDummy) != SC_MARK_SIMPLE ) pView->Unmark(); ScDocument* pBrushDoc = new ScDocument( SCDOCMODE_CLIP ); pView->CopyToClip( pBrushDoc, sal_False, sal_True ); pView->SetBrushDocument( pBrushDoc, bLock ); } } void ScFormatShell::StateFormatPaintbrush( SfxItemSet& rSet ) { if ( pViewData->HasEditView( pViewData->GetActivePart() ) ) rSet.DisableItem( SID_FORMATPAINTBRUSH ); else rSet.Put( SfxBoolItem( SID_FORMATPAINTBRUSH, pViewData->GetView()->HasPaintBrush() ) ); } void ScFormatShell::ExecViewOptions( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); SfxBindings& rBindings = pViewData->GetBindings(); const SfxItemSet* pNewAttrs = rReq.GetArgs(); if ( pNewAttrs ) { sal_uInt16 nSlot = rReq.GetSlot(); if( nSlot == SID_SCGRIDSHOW) { ScViewData* pViewData = pTabViewShell->GetViewData(); const ScViewOptions& rOldOpt = pViewData->GetOptions(); ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current()); bool bState = ((const SfxBoolItem &)pNewAttrs->Get( pNewAttrs->GetPool()->GetWhich( nSlot ) )).GetValue(); if ( (bool)rOldOpt.GetOption( VOPT_GRID ) != bState) { ScViewOptions rNewOpt(rOldOpt); rNewOpt.SetOption( VOPT_GRID, bState); pViewData->SetOptions( rNewOpt ); pViewData->GetDocument()->SetViewOptions( rNewOpt ); pDocSh->SetDocumentModified(); //add , write the change to sc view config ScModule* pScMod = SC_MOD(); pScMod->SetViewOptions( rNewOpt ); //add end rBindings.Invalidate( nSlot ); } } } } void ScFormatShell::GetViewOptions( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell(); if( pTabViewShell ) { ScViewOptions aViewOpt = pTabViewShell->GetViewData()->GetOptions(); rSet.ClearItem(SID_SCGRIDSHOW); SfxBoolItem aItem( SID_SCGRIDSHOW, aViewOpt.GetOption( VOPT_GRID ) ); rSet.Put(aItem); } } // eof