/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svtools.hxx"
//_________________________________________________________________________________________________________________
//	includes
//_________________________________________________________________________________________________________________

#include <svtools/miscopt.hxx>
#include <unotools/configmgr.hxx>
#include <unotools/configitem.hxx>
#include <tools/debug.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>
#include <tools/link.hxx>
#include <tools/list.hxx>
#include <tools/wldcrd.hxx>
#include <tools/urlobj.hxx>

#include <rtl/logfile.hxx>
#include "itemholder2.hxx"

#include <svtools/imgdef.hxx>
#include <vcl/svapp.hxx>

//_________________________________________________________________________________________________________________
//	namespaces
//_________________________________________________________________________________________________________________

using namespace ::utl					;
using namespace ::rtl					;
using namespace ::osl					;
using namespace ::com::sun::star::uno	;
using namespace ::com::sun::star;

//_________________________________________________________________________________________________________________
//	const
//_________________________________________________________________________________________________________________

#define ASCII_STR(s)						OUString( RTL_CONSTASCII_USTRINGPARAM(s) )
#define	ROOTNODE_MISC						ASCII_STR("Office.Common/Misc")
#define	DEFAULT_PLUGINSENABLED				sal_True;

#define	PROPERTYNAME_PLUGINSENABLED			ASCII_STR("PluginsEnabled")
#define	PROPERTYHANDLE_PLUGINSENABLED		0
#define PROPERTYNAME_SYMBOLSET				ASCII_STR("SymbolSet")
#define PROPERTYHANDLE_SYMBOLSET			1
#define PROPERTYNAME_TOOLBOXSTYLE			ASCII_STR("ToolboxStyle")
#define PROPERTYHANDLE_TOOLBOXSTYLE			2
#define PROPERTYNAME_USESYSTEMFILEDIALOG	ASCII_STR("UseSystemFileDialog")
#define PROPERTYHANDLE_USESYSTEMFILEDIALOG	3
#define PROPERTYNAME_SYMBOLSTYLE			ASCII_STR("SymbolStyle")
#define PROPERTYHANDLE_SYMBOLSTYLE			4
#define PROPERTYNAME_USESYSTEMPRINTDIALOG	ASCII_STR("UseSystemPrintDialog")
#define PROPERTYHANDLE_USESYSTEMPRINTDIALOG	5

#define PROPERTYCOUNT						6

#define VCL_TOOLBOX_STYLE_FLAT				((sal_uInt16)0x0004) // from <vcl/toolbox.hxx>

DECLARE_LIST( LinkList, Link * )

//_________________________________________________________________________________________________________________
//	private declarations!
//_________________________________________________________________________________________________________________

class SvtMiscOptions_Impl : public ConfigItem
{
	//-------------------------------------------------------------------------------------------------------------
	//	private member
	//-------------------------------------------------------------------------------------------------------------

	private:
    LinkList    aList;
    sal_Bool    m_bUseSystemFileDialog;
    sal_Bool    m_bIsUseSystemFileDialogRO;
    sal_Bool    m_bPluginsEnabled;
    sal_Bool    m_bIsPluginsEnabledRO;
    sal_Int16   m_nSymbolsSize;
    sal_Bool    m_bIsSymbolsSizeRO;
    sal_Bool    m_bIsSymbolsStyleRO;
    sal_Int16   m_nToolboxStyle;
    sal_Bool    m_bIsToolboxStyleRO;
    sal_Bool    m_bUseSystemPrintDialog;
    sal_Bool    m_bIsUseSystemPrintDialogRO;

    //-------------------------------------------------------------------------------------------------------------
	//	public methods
	//-------------------------------------------------------------------------------------------------------------

	public:

		//---------------------------------------------------------------------------------------------------------
		//	constructor / destructor
		//---------------------------------------------------------------------------------------------------------

		 SvtMiscOptions_Impl();
		~SvtMiscOptions_Impl();

		//---------------------------------------------------------------------------------------------------------
		//	overloaded methods of baseclass
		//---------------------------------------------------------------------------------------------------------

		/*-****************************************************************************************************//**
			@short		called for notify of configmanager
			@descr		These method is called from the ConfigManager before application ends or from the
			 			PropertyChangeListener if the sub tree broadcasts changes. You must update your
						internal values.

			@seealso	baseclass ConfigItem

			@param		"seqPropertyNames" is the list of properties which should be updated.
			@return		-

			@onerror	-
		*//*-*****************************************************************************************************/

    	virtual void Notify( const Sequence< OUString >& seqPropertyNames );

        /** loads required data from the configuration. It's called in the constructor to
         read all entries and form ::Notify to re-read changed settings

         */
        void Load( const Sequence< OUString >& rPropertyNames );

        /*-****************************************************************************************************//**
			@short		write changes to configuration
			@descr		These method writes the changed values into the sub tree
						and should always called in our destructor to guarantee consistency of config data.

			@seealso	baseclass ConfigItem

			@param		-
			@return		-

			@onerror	-
		*//*-*****************************************************************************************************/

    	virtual void Commit();

		//---------------------------------------------------------------------------------------------------------
		//	public interface
		//---------------------------------------------------------------------------------------------------------

        inline sal_Bool UseSystemFileDialog() const
        { return m_bUseSystemFileDialog; }

        inline void SetUseSystemFileDialog( sal_Bool bSet )
        {  m_bUseSystemFileDialog = bSet; SetModified(); }

        inline sal_Bool IsUseSystemFileDialogReadOnly() const
        { return m_bIsUseSystemFileDialogRO; }

        inline sal_Bool IsPluginsEnabled() const
        { return m_bPluginsEnabled; }

        void SetPluginsEnabled( sal_Bool bEnable );

        inline sal_Bool IsPluginsEnabledReadOnly() const
        { return m_bIsPluginsEnabledRO; }

        inline sal_Int16 GetSymbolsSize()
        { return m_nSymbolsSize; }

        void SetSymbolsSize( sal_Int16 nSet );

        inline sal_Bool IsGetSymbolsSizeReadOnly()
        { return m_bIsSymbolsSizeRO; }

        sal_Int16 GetSymbolsStyle() const;
        ::rtl::OUString GetSymbolsStyleName() const;
        sal_Int16 GetCurrentSymbolsStyle() const;

        inline void SetSymbolsStyle( sal_Int16 nSet )
        { ImplSetSymbolsStyle( true, nSet, ::rtl::OUString() ); }

        inline void SetSymbolsStyleName( ::rtl::OUString &rName )
        { ImplSetSymbolsStyle( false, 0, rName ); }

        inline sal_Bool IsGetSymbolsStyleReadOnly()
        { return m_bIsSymbolsStyleRO; }

        // translate to VCL settings ( "0" = 3D, "1" = FLAT )
        inline sal_Int16 GetToolboxStyle()
        { return m_nToolboxStyle ? VCL_TOOLBOX_STYLE_FLAT : 0; }

        // translate from VCL settings
        void SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified );

        inline sal_Bool IsGetToolboxStyleReadOnly()
        { return m_bIsToolboxStyleRO; }

        inline sal_Bool UseSystemPrintDialog() const
        { return m_bUseSystemPrintDialog; }

        inline void SetUseSystemPrintDialog( sal_Bool bSet )
        {  m_bUseSystemPrintDialog = bSet; SetModified(); }

        inline sal_Bool IsUseSystemPrintDialogReadOnly() const
        { return m_bIsUseSystemPrintDialogRO; }

        void AddListenerLink( const Link& rLink );
        void RemoveListenerLink( const Link& rLink );
        void CallListeners();

	//-------------------------------------------------------------------------------------------------------------
	//	private methods
	//-------------------------------------------------------------------------------------------------------------

	private:

		/*-****************************************************************************************************//**
			@short		return list of key names of ouer configuration management which represent oue module tree
			@descr		These methods return a static const list of key names. We need it to get needed values from our
						configuration management.

			@seealso	-

			@param		-
			@return		A list of needed configuration keys is returned.

			@onerror	-
		*//*-*****************************************************************************************************/

		static Sequence< OUString > GetPropertyNames();

    protected:
        void ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName );
};

//*****************************************************************************************************************
//	constructor
//*****************************************************************************************************************
SvtMiscOptions_Impl::SvtMiscOptions_Impl()
	// Init baseclasses first
    : ConfigItem( ROOTNODE_MISC )

    , m_bUseSystemFileDialog( sal_False )
    , m_bIsUseSystemFileDialogRO( sal_False )
    , m_bPluginsEnabled( sal_False )
    , m_bIsPluginsEnabledRO( sal_False )
    , m_nSymbolsSize( 0 )
    , m_bIsSymbolsSizeRO( sal_False )
    , m_bIsSymbolsStyleRO( sal_False )
    , m_nToolboxStyle( 1 )
    , m_bIsToolboxStyleRO( sal_False )
    , m_bUseSystemPrintDialog( sal_False )
    , m_bIsUseSystemPrintDialogRO( sal_False )

{
	// Use our static list of configuration keys to get his values.
	Sequence< OUString >	seqNames	= GetPropertyNames	(			);
    Load( seqNames );
    Sequence< Any >         seqValues   = GetProperties     ( seqNames  );
    Sequence< sal_Bool >    seqRO       = GetReadOnlyStates ( seqNames  );

	// Safe impossible cases.
	// We need values from ALL configuration keys.
	// Follow assignment use order of values in relation to our list of key names!
    DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtMiscOptions_Impl::SvtMiscOptions_Impl()\nI miss some values of configuration keys!\n" );

	// Copy values from list in right order to ouer internal member.
	sal_Int32 nPropertyCount = seqValues.getLength();
	for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
	{
		// Safe impossible cases.
		// Check any for valid value.
		DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" );
        switch( nProperty )
        {
            case PROPERTYHANDLE_PLUGINSENABLED :
            {
                if( !(seqValues[nProperty] >>= m_bPluginsEnabled) )
                {
                    DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" );
                }
                m_bIsPluginsEnabledRO = seqRO[nProperty];
                break;
            }

            case PROPERTYHANDLE_SYMBOLSET :
            {
                if( !(seqValues[nProperty] >>= m_nSymbolsSize) )
                {
                    DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" );
                }
                m_bIsSymbolsSizeRO = seqRO[nProperty];
                break;
            }

            case PROPERTYHANDLE_TOOLBOXSTYLE :
            {
                if( !(seqValues[nProperty] >>= m_nToolboxStyle) )
                {
                    DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" );
                }
                m_bIsToolboxStyleRO = seqRO[nProperty];
                break;
            }

            case PROPERTYHANDLE_USESYSTEMFILEDIALOG :
            {
                if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) )
                {
                    DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" );
                }
                m_bIsUseSystemFileDialogRO = seqRO[nProperty];
                break;
            }

            case PROPERTYHANDLE_USESYSTEMPRINTDIALOG :
            {
                if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) )
                {
                    DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" );
                }
                m_bIsUseSystemPrintDialogRO = seqRO[nProperty];
                break;
            }

            case PROPERTYHANDLE_SYMBOLSTYLE :
            {
                ::rtl::OUString aSymbolsStyle;
                if( seqValues[nProperty] >>= aSymbolsStyle )
                    SetSymbolsStyleName( aSymbolsStyle );
                else
                {
                    DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" );
                }
                m_bIsSymbolsStyleRO = seqRO[nProperty];
                break;
            }
        }
	}

	// Enable notification mechanism of ouer baseclass.
	// We need it to get information about changes outside these class on ouer used configuration keys!
	EnableNotification( seqNames );
}

//*****************************************************************************************************************
//	destructor
//*****************************************************************************************************************
SvtMiscOptions_Impl::~SvtMiscOptions_Impl()
{
	// We must save our current values .. if user forget it!
	if( IsModified() == sal_True )
	{
		Commit();
	}

    for ( sal_uInt16 n=0; n<aList.Count(); )
        delete aList.Remove(n);
}

/*-- 25.02.2005 13:22:04---------------------------------------------------

  -----------------------------------------------------------------------*/
static int lcl_MapPropertyName( const ::rtl::OUString rCompare,
                const uno::Sequence< ::rtl::OUString>& aInternalPropertyNames)
{
    for(int nProp = 0; nProp < aInternalPropertyNames.getLength(); ++nProp)
    {
        if( aInternalPropertyNames[nProp] == rCompare )
            return nProp;
    }
    return -1;
}

void SvtMiscOptions_Impl::Load( const Sequence< OUString >& rPropertyNames )
{
    const uno::Sequence< ::rtl::OUString> aInternalPropertyNames( GetPropertyNames());
    Sequence< Any > seqValues = GetProperties( rPropertyNames  );

    // Safe impossible cases.
    // We need values from ALL configuration keys.
    // Follow assignment use order of values in relation to our list of key names!
    DBG_ASSERT( !(rPropertyNames.getLength()!=seqValues.getLength()), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nI miss some values of configuration keys!\n" );

    // Copy values from list in right order to ouer internal member.
    sal_Int32 nPropertyCount = seqValues.getLength();
    for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
    {
        // Safe impossible cases.
        // Check any for valid value.
        DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" );
        switch( lcl_MapPropertyName(rPropertyNames[nProperty], aInternalPropertyNames) )
        {
            case PROPERTYHANDLE_PLUGINSENABLED      :   {
                                                            if( !(seqValues[nProperty] >>= m_bPluginsEnabled) )
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" );
                                                            }
                                                        }
                                                    break;
            case PROPERTYHANDLE_SYMBOLSET           :   {
                                                            if( !(seqValues[nProperty] >>= m_nSymbolsSize) )
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" );
                                                            }
                                                        }
                                                    break;
            case PROPERTYHANDLE_TOOLBOXSTYLE        :   {
                                                            if( !(seqValues[nProperty] >>= m_nToolboxStyle) )
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" );
                                                            }
                                                        }
                                                    break;
            case PROPERTYHANDLE_USESYSTEMFILEDIALOG      :   {
                                                            if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) )
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" );
                                                            }
                                                        }
                                                    break;
            case PROPERTYHANDLE_USESYSTEMPRINTDIALOG     :   {
                                                            if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) )
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" );
                                                            }
                                                        }
                                                    break;
            case PROPERTYHANDLE_SYMBOLSTYLE         :   {
                                                            ::rtl::OUString aSymbolsStyle;
                                                            if( seqValues[nProperty] >>= aSymbolsStyle )
                                                                SetSymbolsStyleName( aSymbolsStyle );
                                                            else
                                                            {
                                                                DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" );
                                                            }
                                                        }
                                                    break;
        }
    }
}

void SvtMiscOptions_Impl::AddListenerLink( const Link& rLink )
{
    aList.Insert( new Link( rLink ) );
}

void SvtMiscOptions_Impl::RemoveListenerLink( const Link& rLink )
{
    for ( sal_uInt16 n=0; n<aList.Count(); n++ )
    {
        if ( (*aList.GetObject(n) ) == rLink )
        {
            delete aList.Remove(n);
            break;
        }
    }
}

void SvtMiscOptions_Impl::CallListeners()
{
    for ( sal_uInt16 n = 0; n < aList.Count(); ++n )
        aList.GetObject(n)->Call( this );
}

void SvtMiscOptions_Impl::SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified )
{
    m_nToolboxStyle = nStyle ? 1 : 0;
	if ( _bSetModified )
	    SetModified();
	CallListeners();
}

void SvtMiscOptions_Impl::SetSymbolsSize( sal_Int16 nSet )
{
    m_nSymbolsSize = nSet;
    SetModified();
	CallListeners();
}

sal_Int16 SvtMiscOptions_Impl::GetSymbolsStyle() const
{
	return (sal_Int16)Application::GetSettings().GetStyleSettings().GetSymbolsStyle();
}

::rtl::OUString SvtMiscOptions_Impl::GetSymbolsStyleName() const
{
	return Application::GetSettings().GetStyleSettings().GetSymbolsStyleName();
}

sal_Int16 SvtMiscOptions_Impl::GetCurrentSymbolsStyle() const
{
	return (sal_Int16)Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyle();
}

void SvtMiscOptions_Impl::ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName )
{
	if ( ( bValue && ( nSet != GetSymbolsStyle() ) ) ||
		 ( !bValue && ( rName != GetSymbolsStyleName() ) ) )
	{
		AllSettings aAllSettings = Application::GetSettings();
		StyleSettings aStyleSettings = aAllSettings.GetStyleSettings();

		if ( bValue )
			aStyleSettings.SetSymbolsStyle( nSet );
		else
			aStyleSettings.SetSymbolsStyleName( rName );

		aAllSettings.SetStyleSettings(aStyleSettings);
		Application::MergeSystemSettings( aAllSettings );
		Application::SetSettings(aAllSettings);

		SetModified();
		CallListeners();
	}
}

void SvtMiscOptions_Impl::SetPluginsEnabled( sal_Bool bEnable )
{
    m_bPluginsEnabled = bEnable;
    SetModified();
	CallListeners();
}

//*****************************************************************************************************************
//	public method
//*****************************************************************************************************************
void SvtMiscOptions_Impl::Notify( const Sequence< OUString >& rPropertyNames )
{
    Load( rPropertyNames );
	CallListeners();
}

//*****************************************************************************************************************
//	public method
//*****************************************************************************************************************
void SvtMiscOptions_Impl::Commit()
{
	// Get names of supported properties, create a list for values and copy current values to it.
	Sequence< OUString >	seqNames	= GetPropertyNames	();
	sal_Int32				nCount		= seqNames.getLength();
	Sequence< Any >			seqValues	( nCount );
	for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
	{
        switch( nProperty )
        {
            case PROPERTYHANDLE_PLUGINSENABLED :
            {
                if ( !m_bIsPluginsEnabledRO )
                    seqValues[nProperty] <<= m_bPluginsEnabled;
                break;
            }

            case PROPERTYHANDLE_SYMBOLSET :
            {
                if ( !m_bIsSymbolsSizeRO )
                   seqValues[nProperty] <<= m_nSymbolsSize;
                break;
            }

            case PROPERTYHANDLE_TOOLBOXSTYLE :
            {
                if ( !m_bIsToolboxStyleRO )
                    seqValues[nProperty] <<= m_nToolboxStyle;
                break;
            }

            case PROPERTYHANDLE_USESYSTEMFILEDIALOG :
            {
                if ( !m_bIsUseSystemFileDialogRO )
                    seqValues[nProperty] <<= m_bUseSystemFileDialog;
                break;
            }

            case PROPERTYHANDLE_SYMBOLSTYLE :
            {
                if ( !m_bIsSymbolsStyleRO )
                    seqValues[nProperty] <<= GetSymbolsStyleName();
                break;
            }

            case PROPERTYHANDLE_USESYSTEMPRINTDIALOG :
            {
                if ( !m_bIsUseSystemPrintDialogRO )
                    seqValues[nProperty] <<= m_bUseSystemPrintDialog;
                break;
            }
        }
	}
	// Set properties in configuration.
	PutProperties( seqNames, seqValues );
}

//*****************************************************************************************************************
//	private method
//*****************************************************************************************************************
Sequence< OUString > SvtMiscOptions_Impl::GetPropertyNames()
{
	// Build static list of configuration key names.
	static const OUString pProperties[] =
	{
        PROPERTYNAME_PLUGINSENABLED,
        PROPERTYNAME_SYMBOLSET,
        PROPERTYNAME_TOOLBOXSTYLE,
        PROPERTYNAME_USESYSTEMFILEDIALOG,
        PROPERTYNAME_SYMBOLSTYLE,
        PROPERTYNAME_USESYSTEMPRINTDIALOG
	};

	// Initialize return sequence with these list ...
	static const Sequence< OUString > seqPropertyNames( pProperties, PROPERTYCOUNT );
	// ... and return it.
	return seqPropertyNames;
}

//*****************************************************************************************************************
//	initialize static member
//	DON'T DO IT IN YOUR HEADER!
//	see definition for further informations
//*****************************************************************************************************************
SvtMiscOptions_Impl*	SvtMiscOptions::m_pDataContainer	= NULL	;
sal_Int32				SvtMiscOptions::m_nRefCount	= 0		;

//*****************************************************************************************************************
//	constructor
//*****************************************************************************************************************
SvtMiscOptions::SvtMiscOptions()
{
    // Global access, must be guarded (multithreading!).
    MutexGuard aGuard( GetInitMutex() );
	// Increase ouer refcount ...
	++m_nRefCount;
	// ... and initialize ouer data container only if it not already exist!
    if( m_pDataContainer == NULL )
	{
       RTL_LOGFILE_CONTEXT(aLog, "svtools ( ??? ) ::SvtMiscOptions_Impl::ctor()");
       m_pDataContainer = new SvtMiscOptions_Impl;
       ItemHolder2::holdConfigItem(E_MISCOPTIONS);
	}
}

//*****************************************************************************************************************
//	destructor
//*****************************************************************************************************************
SvtMiscOptions::~SvtMiscOptions()
{
    // Global access, must be guarded (multithreading!)
    MutexGuard aGuard( GetInitMutex() );
	// Decrease ouer refcount.
	--m_nRefCount;
	// If last instance was deleted ...
	// we must destroy ouer static data container!
    if( m_nRefCount <= 0 )
	{
		delete m_pDataContainer;
		m_pDataContainer = NULL;
	}
}

sal_Bool SvtMiscOptions::UseSystemFileDialog() const
{
    return m_pDataContainer->UseSystemFileDialog();
}

void SvtMiscOptions::SetUseSystemFileDialog( sal_Bool bEnable )
{
    m_pDataContainer->SetUseSystemFileDialog( bEnable );
}

sal_Bool SvtMiscOptions::IsUseSystemFileDialogReadOnly() const
{
    return m_pDataContainer->IsUseSystemFileDialogReadOnly();
}

sal_Bool SvtMiscOptions::IsPluginsEnabled() const
{
    return m_pDataContainer->IsPluginsEnabled();
}

void SvtMiscOptions::SetPluginsEnabled( sal_Bool bEnable )
{
    m_pDataContainer->SetPluginsEnabled( bEnable );
}

sal_Bool SvtMiscOptions::IsPluginsEnabledReadOnly() const
{
    return m_pDataContainer->IsPluginsEnabledReadOnly();
}

sal_Int16 SvtMiscOptions::GetSymbolsSize() const
{
    return m_pDataContainer->GetSymbolsSize();
}

void SvtMiscOptions::SetSymbolsSize( sal_Int16 nSet )
{
    m_pDataContainer->SetSymbolsSize( nSet );
}

sal_Int16 SvtMiscOptions::GetCurrentSymbolsSize() const
{
    sal_Int16 eOptSymbolsSize = m_pDataContainer->GetSymbolsSize();

    if ( eOptSymbolsSize == SFX_SYMBOLS_SIZE_AUTO )
    {
        // Use system settings, we have to retrieve the toolbar icon size from the
        // Application class
        sal_uLong nStyleIconSize = Application::GetSettings().GetStyleSettings().GetToolbarIconSize();
        if ( nStyleIconSize == STYLE_TOOLBAR_ICONSIZE_LARGE )
            eOptSymbolsSize = SFX_SYMBOLS_SIZE_LARGE;
        else
            eOptSymbolsSize = SFX_SYMBOLS_SIZE_SMALL;
    }

    return eOptSymbolsSize;
}

bool SvtMiscOptions::AreCurrentSymbolsLarge() const
{
    return ( GetCurrentSymbolsSize() == SFX_SYMBOLS_SIZE_LARGE );
}

sal_Bool SvtMiscOptions::IsGetSymbolsSizeReadOnly() const
{
    return m_pDataContainer->IsGetSymbolsSizeReadOnly();
}

sal_Int16 SvtMiscOptions::GetSymbolsStyle() const
{
    return m_pDataContainer->GetSymbolsStyle();
}

sal_Int16 SvtMiscOptions::GetCurrentSymbolsStyle() const
{
    return m_pDataContainer->GetCurrentSymbolsStyle();
}

OUString SvtMiscOptions::GetCurrentSymbolsStyleName() const
{
    return Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyleName();
}

void SvtMiscOptions::SetSymbolsStyle( sal_Int16 nSet )
{
    m_pDataContainer->SetSymbolsStyle( nSet );
}

sal_Bool SvtMiscOptions::IsGetSymbolsStyleReadOnly() const
{
    return m_pDataContainer->IsGetSymbolsStyleReadOnly();
}

sal_Int16 SvtMiscOptions::GetToolboxStyle() const
{
    return m_pDataContainer->GetToolboxStyle();
}

void SvtMiscOptions::SetToolboxStyle( sal_Int16 nStyle )
{
    m_pDataContainer->SetToolboxStyle( nStyle, true );
}

sal_Bool SvtMiscOptions::IsGetToolboxStyleReadOnly() const
{
    return m_pDataContainer->IsGetToolboxStyleReadOnly();
}

sal_Bool SvtMiscOptions::UseSystemPrintDialog() const
{
    return m_pDataContainer->UseSystemPrintDialog();
}

void SvtMiscOptions::SetUseSystemPrintDialog( sal_Bool bEnable )
{
    m_pDataContainer->SetUseSystemPrintDialog( bEnable );
}

//*****************************************************************************************************************
//	private method
//*****************************************************************************************************************
Mutex & SvtMiscOptions::GetInitMutex()
{
	// Initialize static mutex only for one time!
    static Mutex* pMutex = NULL;
	// If these method first called (Mutex not already exist!) ...
    if( pMutex == NULL )
    {
		// ... we must create a new one. Protect follow code with the global mutex -
		// It must be - we create a static variable!
        MutexGuard aGuard( Mutex::getGlobalMutex() );
		// We must check our pointer again - because it can be that another instance of ouer class will be fastr then these!
        if( pMutex == NULL )
        {
			// Create the new mutex and set it for return on static variable.
            static Mutex aMutex;
            pMutex = &aMutex;
        }
    }
	// Return new created or already existing mutex object.
    return *pMutex;
}

void SvtMiscOptions::AddListenerLink( const Link& rLink )
{
    m_pDataContainer->AddListenerLink( rLink );
}

void SvtMiscOptions::RemoveListenerLink( const Link& rLink )
{
    m_pDataContainer->RemoveListenerLink( rLink );
}