/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svx.hxx"

#include <svx/svdotext.hxx>
#include "svx/svditext.hxx"
#include <svx/svdtrans.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdoutl.hxx>
#include <svx/svdpage.hxx>   // fuer Convert
#include <svx/svdmodel.hxx>  // fuer Convert
#include <editeng/outliner.hxx>
#include <svx/sdr/properties/itemsettools.hxx>
#include <svx/sdr/properties/properties.hxx>
#include <basegfx/polygon/b2dpolypolygontools.hxx>
#include <svl/itemset.hxx>
#include <svx/svditer.hxx>
#include <drawinglayer/processor2d/textaspolygonextractor2d.hxx>
#include <svx/sdr/contact/viewcontact.hxx>
#include <svx/xflclit.hxx>
#include <svx/xlnclit.hxx>
#include <svx/xlnwtit.hxx>

////////////////////////////////////////////////////////////////////////////////////////////////////
//
//  @@@@@@ @@@@@ @@   @@ @@@@@@  @@@@  @@@@@  @@@@@@
//    @@   @@    @@@ @@@   @@   @@  @@ @@  @@     @@
//    @@   @@     @@@@@    @@   @@  @@ @@  @@     @@
//    @@   @@@@    @@@     @@   @@  @@ @@@@@      @@
//    @@   @@     @@@@@    @@   @@  @@ @@  @@     @@
//    @@   @@    @@@ @@@   @@   @@  @@ @@  @@ @@  @@
//    @@   @@@@@ @@   @@   @@    @@@@  @@@@@   @@@@
//
//  Transformationen
//
////////////////////////////////////////////////////////////////////////////////////////////////////

void SdrTextObj::NbcSetSnapRect(const Rectangle& rRect)
{
	if (aGeo.nDrehWink!=0 || aGeo.nShearWink!=0) {
		Rectangle aSR0(GetSnapRect());
		long nWdt0=aSR0.Right()-aSR0.Left();
		long nHgt0=aSR0.Bottom()-aSR0.Top();
		long nWdt1=rRect.Right()-rRect.Left();
		long nHgt1=rRect.Bottom()-rRect.Top();
		SdrTextObj::NbcResize(maSnapRect.TopLeft(),Fraction(nWdt1,nWdt0),Fraction(nHgt1,nHgt0));
		SdrTextObj::NbcMove(Size(rRect.Left()-aSR0.Left(),rRect.Top()-aSR0.Top()));
	} else {
		long nHDist=GetTextLeftDistance()+GetTextRightDistance();
		long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
		long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
		long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
		long nTWdt1=rRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
		long nTHgt1=rRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;
		aRect=rRect;
		ImpJustifyRect(aRect);

        // #115391#
        AdaptTextMinSize();

        if (bTextFrame && (pModel==NULL || !pModel->IsPasteResize())) 
        { 
            if(SDRTEXTFIT_RESIZEATTR == GetFitToSize()) 
            {
                NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
            }

            NbcAdjustTextFrameWidthAndHeight();
        }

        ImpCheckShear();
        SetRectsDirty();
    }
}

const Rectangle& SdrTextObj::GetLogicRect() const
{
	return aRect;
}

void SdrTextObj::NbcSetLogicRect(const Rectangle& rRect)
{
	long nHDist=GetTextLeftDistance()+GetTextRightDistance();
	long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
	long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
	long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
	long nTWdt1=rRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
	long nTHgt1=rRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;
	aRect=rRect;
	ImpJustifyRect(aRect);

    // #115391#
    AdaptTextMinSize();

    if(bTextFrame) 
    {
        if(SDRTEXTFIT_RESIZEATTR == GetFitToSize()) 
        {
            NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
        }

        NbcAdjustTextFrameWidthAndHeight();
    }

    SetRectsDirty();
}

long SdrTextObj::GetRotateAngle() const
{
	return aGeo.nDrehWink;
}

long SdrTextObj::GetShearAngle(FASTBOOL /*bVertical*/) const
{
	return aGeo.nShearWink;
}

void SdrTextObj::NbcMove(const Size& rSiz)
{
	MoveRect(aRect,rSiz);
	MoveRect(aOutRect,rSiz);
	MoveRect(maSnapRect,rSiz);
	SetRectsDirty(sal_True);
}

void SdrTextObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
	FASTBOOL bNoShearMerk=aGeo.nShearWink==0;
	FASTBOOL bRota90Merk=bNoShearMerk && aGeo.nDrehWink % 9000 ==0;
	long nHDist=GetTextLeftDistance()+GetTextRightDistance();
	long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
	long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
	long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
	FASTBOOL bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
	FASTBOOL bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
	if (bXMirr || bYMirr) {
		Point aRef1(GetSnapRect().Center());
		if (bXMirr) {
			Point aRef2(aRef1);
			aRef2.Y()++;
			NbcMirrorGluePoints(aRef1,aRef2);
		}
		if (bYMirr) {
			Point aRef2(aRef1);
			aRef2.X()++;
			NbcMirrorGluePoints(aRef1,aRef2);
		}
	}

	if (aGeo.nDrehWink==0 && aGeo.nShearWink==0) {
		ResizeRect(aRect,rRef,xFact,yFact);
		if (bYMirr) {
			aRect.Justify();
			aRect.Move(aRect.Right()-aRect.Left(),aRect.Bottom()-aRect.Top());
			aGeo.nDrehWink=18000;
			aGeo.RecalcSinCos();
		}
	} 
	else 
	{
		// #100663# aRect is NOT initialized for lines (polgon objects with two
		// exceptionally handled points). Thus, after this call the text rotaion is
		// gone. This error must be present since day one of this old drawing layer.
		// It's astonishing that no one discovered it earlier.
		// Polygon aPol(Rect2Poly(aRect,aGeo));
		// Polygon aPol(Rect2Poly(GetSnapRect(), aGeo));
		
		// #101412# go back to old method, side effects are impossible
		// to calculate.
		Polygon aPol(Rect2Poly(aRect,aGeo));

		for(sal_uInt16 a(0); a < aPol.GetSize(); a++) 
		{
			 ResizePoint(aPol[a], rRef, xFact, yFact);
		}

		if(bXMirr != bYMirr) 
		{
			// Polygon wenden und etwas schieben
			Polygon aPol0(aPol);
			
			aPol[0] = aPol0[1];
			aPol[1] = aPol0[0];
			aPol[2] = aPol0[3];
			aPol[3] = aPol0[2];
			aPol[4] = aPol0[1];
		}

		Poly2Rect(aPol, aRect, aGeo);
	}

	if (bRota90Merk) {
		FASTBOOL bRota90=aGeo.nDrehWink % 9000 ==0;
		if (!bRota90) { // Scheinbar Rundungsfehler: Korregieren
			long a=NormAngle360(aGeo.nDrehWink);
			if (a<4500) a=0;
			else if (a<13500) a=9000;
			else if (a<22500) a=18000;
			else if (a<31500) a=27000;
			else a=0;
			aGeo.nDrehWink=a;
			aGeo.RecalcSinCos();
		}
		if (bNoShearMerk!=(aGeo.nShearWink==0)) { // Shear ggf. korregieren wg. Rundungsfehler
			aGeo.nShearWink=0;
			aGeo.RecalcTan();
		}
	}

    ImpJustifyRect(aRect);

    long nTWdt1=aRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
    long nTHgt1=aRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;

    // #115391#
    AdaptTextMinSize();

    if(bTextFrame && (!pModel || !pModel->IsPasteResize())) 
    { 
        if(SDRTEXTFIT_RESIZEATTR == GetFitToSize()) 
        {
            NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
        }

        NbcAdjustTextFrameWidthAndHeight();
    }

    ImpCheckShear();
    SetRectsDirty();
}

void SdrTextObj::NbcRotate(const Point& rRef, long nWink, double sn, double cs)
{
	SetGlueReallyAbsolute(sal_True);
	long dx=aRect.Right()-aRect.Left();
	long dy=aRect.Bottom()-aRect.Top();
	Point aP(aRect.TopLeft());
	RotatePoint(aP,rRef,sn,cs);
	aRect.Left()=aP.X();
	aRect.Top()=aP.Y();
	aRect.Right()=aRect.Left()+dx;
	aRect.Bottom()=aRect.Top()+dy;
	if (aGeo.nDrehWink==0) {
		aGeo.nDrehWink=NormAngle360(nWink);
		aGeo.nSin=sn;
		aGeo.nCos=cs;
	} else {
		aGeo.nDrehWink=NormAngle360(aGeo.nDrehWink+nWink);
		aGeo.RecalcSinCos();
	}
	SetRectsDirty();
	NbcRotateGluePoints(rRef,nWink,sn,cs);
	SetGlueReallyAbsolute(sal_False);
}

void SdrTextObj::NbcShear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear)
{
	SetGlueReallyAbsolute(sal_True);

	// #75889# when this is a SdrPathObj aRect maybe not initialized
	Polygon aPol(Rect2Poly(aRect.IsEmpty() ? GetSnapRect() : aRect, aGeo));
	
	sal_uInt16 nPointCount=aPol.GetSize();
	for (sal_uInt16 i=0; i<nPointCount; i++) {
		 ShearPoint(aPol[i],rRef,tn,bVShear);
	}
	Poly2Rect(aPol,aRect,aGeo);
	ImpJustifyRect(aRect);
	if (bTextFrame) {
		NbcAdjustTextFrameWidthAndHeight();
	}
	ImpCheckShear();
	SetRectsDirty();
	NbcShearGluePoints(rRef,nWink,tn,bVShear);
	SetGlueReallyAbsolute(sal_False);
}

void SdrTextObj::NbcMirror(const Point& rRef1, const Point& rRef2)
{
	SetGlueReallyAbsolute(sal_True);
	FASTBOOL bNoShearMerk=aGeo.nShearWink==0;
	FASTBOOL bRota90Merk=sal_False;
	if (bNoShearMerk &&
		(rRef1.X()==rRef2.X() || rRef1.Y()==rRef2.Y() ||
		 Abs(rRef1.X()-rRef2.X())==Abs(rRef1.Y()-rRef2.Y()))) {
		bRota90Merk=aGeo.nDrehWink % 9000 ==0;
	}
	Polygon aPol(Rect2Poly(aRect,aGeo));
	sal_uInt16 i;
	sal_uInt16 nPntAnz=aPol.GetSize();
	for (i=0; i<nPntAnz; i++) {
		 MirrorPoint(aPol[i],rRef1,rRef2);
	}
	// Polygon wenden und etwas schieben
	Polygon aPol0(aPol);
	aPol[0]=aPol0[1];
	aPol[1]=aPol0[0];
	aPol[2]=aPol0[3];
	aPol[3]=aPol0[2];
	aPol[4]=aPol0[1];
	Poly2Rect(aPol,aRect,aGeo);

	if (bRota90Merk) {
		FASTBOOL bRota90=aGeo.nDrehWink % 9000 ==0;
		if (bRota90Merk && !bRota90) { // Scheinbar Rundungsfehler: Korregieren
			long a=NormAngle360(aGeo.nDrehWink);
			if (a<4500) a=0;
			else if (a<13500) a=9000;
			else if (a<22500) a=18000;
			else if (a<31500) a=27000;
			else a=0;
			aGeo.nDrehWink=a;
			aGeo.RecalcSinCos();
		}
	}
	if (bNoShearMerk!=(aGeo.nShearWink==0)) { // Shear ggf. korregieren wg. Rundungsfehler
		aGeo.nShearWink=0;
		aGeo.RecalcTan();
	}

	ImpJustifyRect(aRect);
	if (bTextFrame) {
		NbcAdjustTextFrameWidthAndHeight();
	}
	ImpCheckShear();
	SetRectsDirty();
	NbcMirrorGluePoints(rRef1,rRef2);
	SetGlueReallyAbsolute(sal_False);
}

//////////////////////////////////////////////////////////////////////////////

SdrObject* SdrTextObj::ImpConvertContainedTextToSdrPathObjs(bool bToPoly) const
{
	SdrObject* pRetval = 0;

	if(!ImpCanConvTextToCurve())
	{
		// suppress HelpTexts from PresObj's
		return 0;
	}

	// get primitives
	const drawinglayer::primitive2d::Primitive2DSequence xSequence(GetViewContact().getViewIndependentPrimitive2DSequence());

	if(xSequence.hasElements())
	{
		// create an extractor with neutral ViewInformation
		const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
		drawinglayer::processor2d::TextAsPolygonExtractor2D aExtractor(aViewInformation2D);

		// extract text as polygons
		aExtractor.process(xSequence);

		// get results
		const drawinglayer::processor2d::TextAsPolygonDataNodeVector& rResult = aExtractor.getTarget();
		const sal_uInt32 nResultCount(rResult.size());

		if(nResultCount)
		{
			// prepare own target
			SdrObjGroup* pGroup = new SdrObjGroup();
			SdrObjList* pObjectList = pGroup->GetSubList();

			// process results
			for(sal_uInt32 a(0); a < nResultCount; a++)
			{
				const drawinglayer::processor2d::TextAsPolygonDataNode& rCandidate = rResult[a];
				basegfx::B2DPolyPolygon aPolyPolygon(rCandidate.getB2DPolyPolygon());

				if(aPolyPolygon.count())
				{
					// take care of wanted polygon type
					if(bToPoly)
					{
						if(aPolyPolygon.areControlPointsUsed())
						{
							aPolyPolygon = basegfx::tools::adaptiveSubdivideByAngle(aPolyPolygon);
						}
					}
					else
					{
						if(!aPolyPolygon.areControlPointsUsed())
						{
							aPolyPolygon = basegfx::tools::expandToCurve(aPolyPolygon);
						}
					}

					// create ItemSet with object attributes
					SfxItemSet aAttributeSet(GetObjectItemSet());
					SdrPathObj* pPathObj = 0;

					// always clear objectshadow; this is included in the extraction
					aAttributeSet.Put(SdrShadowItem(false));
					
					if(rCandidate.getIsFilled())
					{
						// set needed items
						aAttributeSet.Put(XFillColorItem(String(), Color(rCandidate.getBColor())));
						aAttributeSet.Put(XLineStyleItem(XLINE_NONE));
						aAttributeSet.Put(XFillStyleItem(XFILL_SOLID));

						// create filled SdrPathObj
						pPathObj = new SdrPathObj(OBJ_PATHFILL, aPolyPolygon);
					}
					else
					{
						// set needed items
						aAttributeSet.Put(XLineColorItem(String(), Color(rCandidate.getBColor())));
						aAttributeSet.Put(XLineStyleItem(XLINE_SOLID));
						aAttributeSet.Put(XLineWidthItem(0));
						aAttributeSet.Put(XFillStyleItem(XFILL_NONE));

						// create line SdrPathObj
						pPathObj = new SdrPathObj(OBJ_PATHLINE, aPolyPolygon);
					}

					// copy basic information from original
					pPathObj->ImpSetAnchorPos(GetAnchorPos());
					pPathObj->NbcSetLayer(GetLayer());

					if(GetModel()) 
					{
						pPathObj->SetModel(GetModel());
						pPathObj->NbcSetStyleSheet(GetStyleSheet(), true);
					}

					// apply prepared ItemSet and add to target
					pPathObj->SetMergedItemSet(aAttributeSet);
					pObjectList->InsertObject(pPathObj);
				}
			}

			// postprocess; if no result and/or only one object, simplify
			if(!pObjectList->GetObjCount())
			{
				delete pGroup;
			}
			else if(1 == pObjectList->GetObjCount()) 
			{
				pRetval = pObjectList->RemoveObject(0);
				delete pGroup;
			}
			else
			{
				pRetval = pGroup;
			}
		}
	}

	return pRetval;
}

//////////////////////////////////////////////////////////////////////////////

SdrObject* SdrTextObj::DoConvertToPolyObj(sal_Bool bBezier, bool bAddText) const
{
    if(bAddText)
    {
    	return ImpConvertContainedTextToSdrPathObjs(!bBezier);
    }

    return 0;
}

bool SdrTextObj::ImpCanConvTextToCurve() const 
{ 
	return !IsOutlText();
}

SdrObject* SdrTextObj::ImpConvertMakeObj(const basegfx::B2DPolyPolygon& rPolyPolygon, sal_Bool bClosed, sal_Bool bBezier, sal_Bool bNoSetAttr) const
{
	SdrObjKind ePathKind = bClosed ? OBJ_PATHFILL : OBJ_PATHLINE;
	basegfx::B2DPolyPolygon aB2DPolyPolygon(rPolyPolygon);

	// #i37011#
	if(!bBezier) 
	{
		aB2DPolyPolygon = basegfx::tools::adaptiveSubdivideByAngle(aB2DPolyPolygon);
		ePathKind = bClosed ? OBJ_POLY : OBJ_PLIN;
	}

	SdrPathObj* pPathObj = new SdrPathObj(ePathKind, aB2DPolyPolygon);

	if(bBezier) 
	{
		// create bezier curves
		pPathObj->SetPathPoly(basegfx::tools::expandToCurve(pPathObj->GetPathPoly()));
	}

	if(pPathObj) 
	{
		pPathObj->ImpSetAnchorPos(aAnchor);
		pPathObj->NbcSetLayer(SdrLayerID(GetLayer()));

		if(pModel) 
		{
			pPathObj->SetModel(pModel);
		
			if(!bNoSetAttr) 
			{
				sdr::properties::ItemChangeBroadcaster aC(*pPathObj);
			
				pPathObj->ClearMergedItem();
				pPathObj->SetMergedItemSet(GetObjectItemSet());
				pPathObj->GetProperties().BroadcastItemChange(aC);
				pPathObj->NbcSetStyleSheet(GetStyleSheet(), sal_True);
			}
		}
	}

	return pPathObj;
}

SdrObject* SdrTextObj::ImpConvertAddText(SdrObject* pObj, FASTBOOL bBezier) const
{
	if(!ImpCanConvTextToCurve()) 
    {
        return pObj;
    }

	SdrObject* pText = ImpConvertContainedTextToSdrPathObjs(!bBezier);

    if(!pText)
    {
        return pObj;
    }

	if(!pObj) 
    {
        return pText;
    }

	if(pText->IsGroupObject()) 
    {
        // is already group object, add partial shape in front
		SdrObjList* pOL=pText->GetSubList();
		pOL->InsertObject(pObj,0);

        return pText;
	} 
    else 
    {
        // not yet a group, create one and add partial and new shapes
		SdrObjGroup* pGrp=new SdrObjGroup;
		SdrObjList* pOL=pGrp->GetSubList();
		pOL->InsertObject(pObj);
		pOL->InsertObject(pText);

        return pGrp;
	}
}

//////////////////////////////////////////////////////////////////////////////
// eof