/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sw.hxx" #include #include #include #include #include #include #include #include #include // prevent conflict between exception and std::exception #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // fuer Anwenden einer #include // fuer Undo-Ids #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // -> #111827# #include #include // <- #111827# #include #include #include #include "PostItMgr.hxx" #include using namespace sw::mark; using namespace com::sun::star; #define COMMON_INI_LIST \ fnDrag(&SwWrtShell::BeginDrag),\ fnSetCrsr(&SwWrtShell::SetCrsr),\ fnEndDrag(&SwWrtShell::EndDrag),\ fnKillSel(&SwWrtShell::Ignore),\ pModeStack(0), \ ePageMove(MV_NO),\ pCrsrStack(0),\ rView(rShell),\ bDestOnStack(sal_False), \ fnLeaveSelect(&SwWrtShell::SttLeaveSelect) #define BITFLD_INI_LIST \ bClearMark = \ bIns = sal_True;\ bAddMode = \ bBlockMode = \ bExtMode = \ bInSelect = \ bCopy = \ bLayoutMode = \ bNoEdit = \ bSelWrd = \ bSelLn = \ bIsInClickToEdit = \ mbRetainSelection = sal_False; SvxAutoCorrect* lcl_IsAutoCorr() { SvxAutoCorrect* pACorr = SvxAutoCorrCfg::Get()->GetAutoCorrect(); if( pACorr && !pACorr->IsAutoCorrFlag( CptlSttSntnc | CptlSttWrd | AddNonBrkSpace | ChgOrdinalNumber | ChgToEnEmDash | SetINetAttr | Autocorrect )) pACorr = 0; return pACorr; } void SwWrtShell::NoEdit(sal_Bool bHideCrsr) { if(bHideCrsr) HideCrsr(); bNoEdit = sal_True; } void SwWrtShell::Edit() { if (CanInsert()) { ShowCrsr(); bNoEdit = sal_False; } } sal_Bool SwWrtShell::IsEndWrd() { MV_KONTEXT(this); if(IsEndPara() && !IsSttPara()) return sal_True; return IsEndWord(); } /*------------------------------------------------------------------------ Beschreibung: Abfrage, ob Einfuegen moeglich ist; gfs. Beep ------------------------------------------------------------------------*/ bool SwWrtShell::_CanInsert() { if(!CanInsert()) { Sound::Beep(); return false; } return true; } /*------------------------------------------------------------------------ Beschreibung: String einfuegen ------------------------------------------------------------------------*/ void SwWrtShell::InsertByWord( const String & rStr) { if( rStr.Len() ) { sal_Bool bDelim = GetAppCharClass().isLetterNumeric( rStr, 0 ); xub_StrLen nPos = 0, nStt = 0; for( ; nPos < rStr.Len(); nPos++ ) { sal_Bool bTmpDelim = GetAppCharClass().isLetterNumeric( rStr, nPos ); if( bTmpDelim != bDelim ) { Insert( rStr.Copy( nStt, nPos - nStt )); nStt = nPos; } } if( nStt != nPos ) Insert( rStr.Copy( nStt, nPos - nStt )); } } void SwWrtShell::Insert( const String &rStr ) { ResetCursorStack(); if( !_CanInsert() ) return; sal_Bool bStarted = sal_False, bHasSel = HasSelection(), bCallIns = bIns /*|| bHasSel*/; bool bDeleted = false; if( bHasSel || ( !bIns && SelectHiddenRange() ) ) { // nur hier klammern, da das normale Insert schon an der // Editshell geklammert ist StartAllAction(); // #111827# SwRewriter aRewriter; aRewriter.AddRule(UNDO_ARG1, GetCrsrDescr()); aRewriter.AddRule(UNDO_ARG2, String(SW_RES(STR_YIELDS))); { String aTmpStr; aTmpStr += String(SW_RES(STR_START_QUOTE)); aTmpStr += rStr; aTmpStr += String(SW_RES(STR_END_QUOTE)); aRewriter.AddRule(UNDO_ARG3, rStr); } StartUndo(UNDO_REPLACE, &aRewriter); bStarted = sal_True; bDeleted = DelRight() != 0; } /* JP 21.01.98: Ueberschreiben ueberschreibt nur die Selektion, nicht das naechste Zeichen. if( bHasSel && !bIns && 1 < rStr.Len() ) { // falls mehrere Zeichen anstehen, nur das erste einfuegen, // der Rest muss dann aber Ueberschrieben werden. SwEditShell::Insert( rStr.GetChar( 0 ) ); SwEditShell::Overwrite( rStr.Copy( 1 ) ); } else */ bCallIns ? SwEditShell::Insert2( rStr, bDeleted ) : SwEditShell::Overwrite( rStr ); if( bStarted ) { EndAllAction(); EndUndo(); } // delete pChgFlg; } /* Begrenzung auf maximale Hoehe geht nicht, da die maximale Hoehe * des aktuellen Frames nicht erfragt werden kann. */ void SwWrtShell::Insert( const String &rPath, const String &rFilter, const Graphic &rGrf, SwFlyFrmAttrMgr *pFrmMgr, sal_Bool bRule ) { ResetCursorStack(); if ( !_CanInsert() ) return; StartAllAction(); SwRewriter aRewriter; aRewriter.AddRule(UNDO_ARG1, SW_RES(STR_GRAPHIC)); StartUndo(UNDO_INSERT, &aRewriter); if ( HasSelection() ) DelRight(); // eingefuegte Grafik in eigenen Absatz, falls am Ende // eines nichtleeren Absatzes //For i120928,avoid to split node //if ( IsEndPara() && !IsSttPara() ) // SwFEShell::SplitNode(); EnterSelFrmMode(); sal_Bool bSetGrfSize = sal_True; sal_Bool bOwnMgr = sal_False; if ( !pFrmMgr ) { bOwnMgr = sal_True; pFrmMgr = new SwFlyFrmAttrMgr( sal_True, this, FRMMGR_TYPE_GRF ); // VORSICHT // GetAttrSet nimmt einen Abgleich vor // Beim Einfuegen ist eine SwFrmSize vorhanden wegen der // DEF-Rahmengroesse // Diese muss fuer die optimale Groesse explizit entfernt werden pFrmMgr->DelAttr(RES_FRM_SIZE); } else { Size aSz( pFrmMgr->GetSize() ); if ( !aSz.Width() || !aSz.Height() ) { aSz.Width() = aSz.Height() = 567; pFrmMgr->SetSize( aSz ); } else if ( aSz.Width() != DFLT_WIDTH && aSz.Height() != DFLT_HEIGHT ) bSetGrfSize = sal_False; pFrmMgr->SetHeightSizeType(ATT_FIX_SIZE); } // Einfuegen der Grafik SwFEShell::Insert(rPath, rFilter, &rGrf, &pFrmMgr->GetAttrSet()); if ( bOwnMgr ) pFrmMgr->UpdateAttrMgr(); if( bSetGrfSize && !bRule ) { Size aGrfSize, aBound = GetGraphicDefaultSize(); GetGrfSize( aGrfSize ); //Die GrafikSize noch um die Randattribute vergroessern, denn die //Zaehlen beim Rahmen mit. aGrfSize.Width() += pFrmMgr->CalcWidthBorder(); aGrfSize.Height()+= pFrmMgr->CalcHeightBorder(); const BigInt aTempWidth( aGrfSize.Width() ); const BigInt aTempHeight( aGrfSize.Height()); // ggf. Breite anpassen, Hoehe dann proportional verkleinern if( aGrfSize.Width() > aBound.Width() ) { aGrfSize.Width() = aBound.Width(); aGrfSize.Height() = ((BigInt)aBound.Width()) * aTempHeight / aTempWidth; } // ggf. Hoehe anpassen, Breite dann proportional verkleinern if( aGrfSize.Height() > aBound.Height() ) { aGrfSize.Height() = aBound.Height(); aGrfSize.Width() = ((BigInt)aBound.Height()) * aTempWidth / aTempHeight; } pFrmMgr->SetSize( aGrfSize ); pFrmMgr->UpdateFlyFrm(); } if ( bOwnMgr ) delete pFrmMgr; EndUndo(); EndAllAction(); } /*------------------------------------------------------------------------ Beschreibung: Fuegt ein OLE-Objekt in die CORE ein. Wenn kein Object uebergeben wird, so wird eins erzeugt. ------------------------------------------------------------------------*/ void SwWrtShell::InsertObject( const svt::EmbeddedObjectRef& xRef, SvGlobalName *pName, sal_Bool bActivate, sal_uInt16 nSlotId ) { ResetCursorStack(); if( !_CanInsert() ) return; if( !xRef.is() ) { // temporary storage svt::EmbeddedObjectRef xObj; uno::Reference < embed::XStorage > xStor = comphelper::OStorageHelper::GetTemporaryStorage(); sal_Bool bDoVerb = sal_True; if ( pName ) { comphelper::EmbeddedObjectContainer aCnt( xStor ); ::rtl::OUString aName; // TODO/LATER: get aspect? xObj.Assign( aCnt.CreateEmbeddedObject( pName->GetByteSequence(), aName ), embed::Aspects::MSOLE_CONTENT ); } else { SvObjectServerList aServerList; switch (nSlotId) { case SID_INSERT_OBJECT: { aServerList.FillInsertObjects(); aServerList.Remove( SwDocShell::Factory().GetClassId() ); // Intentionally no break! } // TODO/LATER: recording! Convert properties to items case SID_INSERT_PLUGIN: case SID_INSERT_FLOATINGFRAME: { SfxSlotPool* pSlotPool = SW_MOD()->GetSlotPool(); const SfxSlot* pSlot = pSlotPool->GetSlot(nSlotId); rtl::OString aCmd(".uno:"); aCmd += pSlot->GetUnoName(); SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); SfxAbstractInsertObjectDialog* pDlg = pFact->CreateInsertObjectDialog( GetWin(), rtl::OStringToOUString( aCmd, RTL_TEXTENCODING_UTF8 ), xStor, &aServerList ); if ( pDlg ) { pDlg->Execute(); bDoVerb = pDlg->IsCreateNew(); ::rtl::OUString aIconMediaType; uno::Reference< io::XInputStream > xIconMetaFile = pDlg->GetIconIfIconified( &aIconMediaType ); xObj.Assign( pDlg->GetObject(), xIconMetaFile.is() ? embed::Aspects::MSOLE_ICON : embed::Aspects::MSOLE_CONTENT ); if ( xIconMetaFile.is() ) xObj.SetGraphicStream( xIconMetaFile, aIconMediaType ); DELETEZ( pDlg ); } break; } default: break; } } if ( xObj.is() ) { if( InsertOleObject( xObj ) && bActivate && bDoVerb ) { SfxInPlaceClient* pClient = GetView().FindIPClient( xObj.GetObject(), &GetView().GetEditWin() ); if ( !pClient ) { pClient = new SwOleClient( &GetView(), &GetView().GetEditWin(), xObj ); SetCheckForOLEInCaption( sal_True ); } if ( xObj.GetViewAspect() == embed::Aspects::MSOLE_ICON ) { SwRect aArea = GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, 0, xObj.GetObject() ); aArea.Pos() += GetAnyCurRect( RECT_FLY_EMBEDDED, 0, xObj.GetObject() ).Pos(); MapMode aMapMode( MAP_TWIP ); Size aSize = xObj.GetSize( &aMapMode ); aArea.Width( aSize.Width() ); aArea.Height( aSize.Height() ); RequestObjectResize( aArea, xObj.GetObject() ); } else CalcAndSetScale( xObj ); //#50270# Error brauchen wir nicht handeln, das erledigt das //DoVerb in der SfxViewShell pClient->DoVerb( SVVERB_SHOW ); // TODO/LATER: set document name - should be done in Client //if ( !ERRCODE_TOERROR( nErr ) ) // xIPObj->SetDocumentName( GetView().GetDocShell()->GetTitle() ); } } } else { if( HasSelection() ) DelRight(); InsertOleObject( xRef ); } } /*------------------------------------------------------------------------ Beschreibung: Object in die Core einfuegen. Vom ClipBoard oder Insert ------------------------------------------------------------------------*/ sal_Bool SwWrtShell::InsertOleObject( const svt::EmbeddedObjectRef& xRef, SwFlyFrmFmt **pFlyFrmFmt ) { ResetCursorStack(); StartAllAction(); StartUndo(UNDO_INSERT); //Some differences between Math and any other objects: //1. Selections should be deleted. For Math the Text should be // passed to the Object //2. If the cursor is at the end of an non empty paragraph a paragraph // break should be inserted. Math objects are character bound and // no break should be inserted. //3. If an selection is passed to a Math object, this object should // not be activated. sal_False should be returned then. sal_Bool bStarMath = sal_True; sal_Bool bActivate = sal_True; // set parent to get correct VisArea(in case of object needing parent printer) uno::Reference < container::XChild > xChild( xRef.GetObject(), uno::UNO_QUERY ); if ( xChild.is() ) xChild->setParent( pDoc->GetDocShell()->GetModel() ); SvGlobalName aCLSID( xRef->getClassID() ); bStarMath = ( SotExchange::IsMath( aCLSID ) != 0 ); if( IsSelection() ) { if( bStarMath ) { String aMathData; GetSelectedText( aMathData, GETSELTXT_PARABRK_TO_ONLYCR ); if( aMathData.Len() && svt::EmbeddedObjectRef::TryRunningState( xRef.GetObject() ) ) { uno::Reference < beans::XPropertySet > xSet( xRef->getComponent(), uno::UNO_QUERY ); if ( xSet.is() ) { try { xSet->setPropertyValue( ::rtl::OUString::createFromAscii("Formula"), uno::makeAny( ::rtl::OUString( aMathData ) ) ); bActivate = sal_False; } catch ( uno::Exception& ) { } } } } DelRight(); } if ( !bStarMath ) SwFEShell::SplitNode( sal_False, sal_False ); EnterSelFrmMode(); SwFlyFrmAttrMgr aFrmMgr( sal_True, this, FRMMGR_TYPE_OLE ); aFrmMgr.SetHeightSizeType(ATT_FIX_SIZE); SwRect aBound; CalcBoundRect( aBound, aFrmMgr.GetAnchor() ); // The Size should be suggested by the OLE server MapMode aMapMode( MAP_TWIP ); Size aSz = xRef.GetSize( &aMapMode ); // Object size can be limited if ( aSz.Width() > aBound.Width() ) { //Immer proportional begrenzen. aSz.Height() = aSz.Height() * aBound.Width() / aSz.Width(); aSz.Width() = aBound.Width(); } aFrmMgr.SetSize( aSz ); SwFlyFrmFmt *pFmt = SwFEShell::InsertObject( xRef, &aFrmMgr.GetAttrSet() ); // --> #i972# if ( bStarMath && pDoc->get( IDocumentSettingAccess::MATH_BASELINE_ALIGNMENT ) ) AlignFormulaToBaseline( xRef.GetObject() ); // <-- if (pFlyFrmFmt) *pFlyFrmFmt = pFmt; if ( SotExchange::IsChart( aCLSID ) ) { uno::Reference< embed::XEmbeddedObject > xEmbeddedObj( xRef.GetObject(), uno::UNO_QUERY ); if ( xEmbeddedObj.is() ) { bool bDisableDataTableDialog = false; svt::EmbeddedObjectRef::TryRunningState( xEmbeddedObj ); uno::Reference< beans::XPropertySet > xProps( xEmbeddedObj->getComponent(), uno::UNO_QUERY ); if ( xProps.is() && ( xProps->getPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ) ) >>= bDisableDataTableDialog ) && bDisableDataTableDialog ) { xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ), uno::makeAny( sal_False ) ); xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableComplexChartTypes" ) ), uno::makeAny( sal_False ) ); uno::Reference< util::XModifiable > xModifiable( xProps, uno::UNO_QUERY ); if ( xModifiable.is() ) { xModifiable->setModified( sal_True ); } } } } EndAllAction(); GetView().AutoCaption(OLE_CAP, &aCLSID); SwRewriter aRewriter; if ( bStarMath ) aRewriter.AddRule(UNDO_ARG1, SW_RES(STR_MATH_FORMULA)); else if ( SotExchange::IsChart( aCLSID ) ) aRewriter.AddRule(UNDO_ARG1, SW_RES(STR_CHART)); else aRewriter.AddRule(UNDO_ARG1, SW_RES(STR_OLE)); EndUndo(UNDO_INSERT, &aRewriter); return bActivate; } /*------------------------------------------------------------------------ Beschreibung: Das aktuelle selektierte OLE-Objekt wird mit dem Verb in den Server geladen. ------------------------------------------------------------------------*/ void SwWrtShell::LaunchOLEObj( long nVerb ) { if ( GetCntType() == CNT_OLE && !GetView().GetViewFrame()->GetFrame().IsInPlace() ) { svt::EmbeddedObjectRef& xRef = GetOLEObject(); ASSERT( xRef.is(), "OLE not found" ); SfxInPlaceClient* pCli=0; pCli = GetView().FindIPClient( xRef.GetObject(), &GetView().GetEditWin() ); if ( !pCli ) pCli = new SwOleClient( &GetView(), &GetView().GetEditWin(), xRef ); ((SwOleClient*)pCli)->SetInDoVerb( sal_True ); CalcAndSetScale( xRef ); pCli->DoVerb( nVerb ); ((SwOleClient*)pCli)->SetInDoVerb( sal_False ); CalcAndSetScale( xRef ); } } void SwWrtShell::MoveObjectIfActive( svt::EmbeddedObjectRef& xObj, const Point& rOffset ) { try { sal_Int32 nState = xObj->getCurrentState(); if ( nState == ::com::sun::star::embed::EmbedStates::INPLACE_ACTIVE || nState == ::com::sun::star::embed::EmbedStates::UI_ACTIVE ) { SfxInPlaceClient* pCli = GetView().FindIPClient( xObj.GetObject(), &(GetView().GetEditWin()) ); if ( pCli ) { Rectangle aArea = pCli->GetObjArea(); aArea += rOffset; pCli->SetObjArea( aArea ); } } } catch( uno::Exception& ) {} } void SwWrtShell::CalcAndSetScale( svt::EmbeddedObjectRef& xObj, const SwRect *pFlyPrtRect, const SwRect *pFlyFrmRect, const bool bNoTxtFrmPrtAreaChanged ) { //Einstellen der Skalierung am Client. Diese ergibt sich aus der Differenz //zwischen der VisArea des Objektes und der ObjArea. ASSERT( xObj.is(), "ObjectRef not valid" ); sal_Int64 nAspect = xObj.GetViewAspect(); if ( nAspect == embed::Aspects::MSOLE_ICON ) return; // the replacement image is completely controlled by container in this case sal_Int64 nMisc = 0; sal_Bool bLinkingChart = sal_False; try { nMisc = xObj->getStatus( nAspect ); //Das kann ja wohl nur ein nicht aktives Objekt sein. Diese bekommen //auf Wunsch die neue Groesse als VisArea gesetzt (Chart) if( embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE & nMisc ) { // TODO/MBA: testing SwRect aRect( pFlyPrtRect ? *pFlyPrtRect : GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, 0, xObj.GetObject() )); if( !aRect.IsEmpty() ) { // TODO/LEAN: getMapUnit can switch object to running state // xObj.TryRunningState(); MapUnit aUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( nAspect ) ); // TODO/LATER: needs complete VisArea?! Size aSize( OutputDevice::LogicToLogic( aRect.SVRect(), MAP_TWIP, aUnit ).GetSize() ); awt::Size aSz; aSz.Width = aSize.Width(); aSz.Height = aSize.Height(); xObj->setVisualAreaSize( nAspect, aSz ); // --> OD 2005-05-02 #i48419# - action 'UpdateReplacement' doesn't // have to change the modified state of the document. // This is only a workaround for the defect, that this action // modifies a document after load, because unnecessarily the // replacement graphic is updated, in spite of the fact that // nothing has been changed. // If the replacement graphic changes by this action, the document // will be already modified via other mechanisms. { bool bResetEnableSetModified(false); if ( GetDoc()->GetDocShell()->IsEnableSetModified() ) { GetDoc()->GetDocShell()->EnableSetModified( sal_False ); bResetEnableSetModified = true; } //#i79576# don't destroy chart replacement images on load //#i79578# don't request a new replacement image for charts to often //a chart sends a modified call to the framework if it was changed //thus the replacement update is already handled elsewhere if ( !SotExchange::IsChart( xObj->getClassID() ) ) xObj.UpdateReplacement(); if ( bResetEnableSetModified ) { GetDoc()->GetDocShell()->EnableSetModified( sal_True ); } } // <-- } // TODO/LATER: this is only a workaround, uno::Reference< chart2::XChartDocument > xChartDocument( xObj->getComponent(), uno::UNO_QUERY ); bLinkingChart = ( xChartDocument.is() && !xChartDocument->hasInternalDataProvider() ); } } catch ( uno::Exception& ) { // TODO/LATER: handle the error return; } SfxInPlaceClient* pCli = GetView().FindIPClient( xObj.GetObject(), &GetView().GetEditWin() ); if ( !pCli ) { if ( (embed::EmbedMisc::EMBED_ACTIVATEIMMEDIATELY & nMisc) || bLinkingChart // TODO/LATER: ResizeOnPrinterChange //|| SVOBJ_MISCSTATUS_RESIZEONPRINTERCHANGE & xObj->GetMiscStatus() // --> OD #i117189# - refine condition for non-resizable objects // non-resizable objects need to be set the size back by this method || ( bNoTxtFrmPrtAreaChanged && nMisc & embed::EmbedMisc::EMBED_NEVERRESIZE ) ) { pCli = new SwOleClient( &GetView(), &GetView().GetEditWin(), xObj ); } else return; } // TODO/LEAN: getMapUnit can switch object to running state // xObj.TryRunningState(); awt::Size aSize; try { aSize = xObj->getVisualAreaSize( nAspect ); } catch( embed::NoVisualAreaSizeException& ) { DBG_ERROR( "Can't get visual area size!\n" ); // the scaling will not be done } catch( uno::Exception& ) { // TODO/LATER: handle the error DBG_ERROR( "Can't get visual area size!\n" ); return; } Size _aVisArea( aSize.Width, aSize.Height ); Fraction aScaleWidth( 1, 1 ); Fraction aScaleHeight( 1, 1 ); sal_Bool bUseObjectSize = sal_False; // solange keine vernuenftige Size vom Object kommt, kann nichts // skaliert werden if( _aVisArea.Width() && _aVisArea.Height() ) { const MapMode aTmp( MAP_TWIP ); MapUnit aUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( nAspect ) ); _aVisArea = OutputDevice::LogicToLogic( _aVisArea, aUnit, aTmp); Size aObjArea; if ( pFlyPrtRect ) aObjArea = pFlyPrtRect->SSize(); else aObjArea = GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, 0, xObj.GetObject() ).SSize(); // differ the aObjArea and _aVisArea by 1 Pixel then set new VisArea long nX, nY; SwSelPaintRects::Get1PixelInLogic( *this, &nX, &nY ); if( !( _aVisArea.Width() - nX <= aObjArea.Width() && _aVisArea.Width() + nX >= aObjArea.Width() && _aVisArea.Height()- nY <= aObjArea.Height()&& _aVisArea.Height()+ nY >= aObjArea.Height() )) { // TODO/LATER: MISCSTATUS_RESIZEONPRINTERCHANGE /* if( SVOBJ_MISCSTATUS_RESIZEONPRINTERCHANGE & nMisc ) { //This type of objects should never be resized. //If this request comes from the Writer core (inaktive Object //ist resized), the Object should be resized too. //If this request comes from the Object itself, the Frame //in the Writer core should be resized. if ( pFlyPrtRect ) //Request from core? { xObj->SetVisArea( OutputDevice::LogicToLogic( pFlyPrtRect->SVRect(), MAP_TWIP, xObj->GetMapUnit() )); } else { SwRect aTmp( Point( LONG_MIN, LONG_MIN ), _aVisArea ); RequestObjectResize( aTmp, xObj ); } //Der Rest erledigt sich, weil wir eh wiederkommen sollten, evtl. //sogar rekursiv. return; } else*/ if ( nMisc & embed::EmbedMisc::EMBED_NEVERRESIZE ) { // the object must not be scaled, the size stored in object must be used for restoring bUseObjectSize = sal_True; } else { aScaleWidth = Fraction( aObjArea.Width(), _aVisArea.Width() ); aScaleHeight = Fraction( aObjArea.Height(), _aVisArea.Height()); } } } //Jetzt ist auch der guenstige Zeitpunkt die ObjArea einzustellen. //Die Skalierung muss beruecksichtigt werden. SwRect aArea; if ( pFlyPrtRect ) { aArea = *pFlyPrtRect; aArea += pFlyFrmRect->Pos(); } else { aArea = GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, 0, xObj.GetObject() ); aArea.Pos() += GetAnyCurRect( RECT_FLY_EMBEDDED, 0, xObj.GetObject() ).Pos(); } if ( bUseObjectSize ) { // --> this moves non-resizable object so that when adding borders the baseline remains the same const SwFlyFrmFmt *pFlyFrmFmt = dynamic_cast< const SwFlyFrmFmt * >( GetFlyFrmFmt() ); ASSERT( pFlyFrmFmt, "Could not find fly frame." ); if ( pFlyFrmFmt ) { const Point &rPoint = pFlyFrmFmt->GetLastFlyFrmPrtRectPos(); SwRect aRect( pFlyPrtRect ? *pFlyPrtRect : GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, 0, xObj.GetObject() )); aArea += rPoint - aRect.Pos(); // adjust area by diff of printing area position in order to keep baseline alignment correct. } // <-- aArea.Width ( _aVisArea.Width() ); aArea.Height( _aVisArea.Height() ); RequestObjectResize( aArea, xObj.GetObject() ); } else { aArea.Width ( Fraction( aArea.Width() ) / pCli->GetScaleWidth() ); aArea.Height( Fraction( aArea.Height() ) / pCli->GetScaleHeight()); } pCli->SetObjAreaAndScale( aArea.SVRect(), aScaleWidth, aScaleHeight ); } void SwWrtShell::ConnectObj( svt::EmbeddedObjectRef& xObj, const SwRect &rPrt, const SwRect &rFrm ) { SfxInPlaceClient* pCli = GetView().FindIPClient( xObj.GetObject(), &GetView().GetEditWin()); if ( !pCli ) pCli = new SwOleClient( &GetView(), &GetView().GetEditWin(), xObj ); CalcAndSetScale( xObj, &rPrt, &rFrm ); } /*------------------------------------------------------------------------ Beschreibung: Einfuegen harter Seitenumbruch; Selektionen werden ueberschrieben ------------------------------------------------------------------------*/ void SwWrtShell::InsertPageBreak(const String *pPageDesc, sal_uInt16 nPgNum ) { ResetCursorStack(); if( _CanInsert() ) { ACT_KONTEXT(this); StartUndo(UNDO_UI_INSERT_PAGE_BREAK); if ( !IsCrsrInTbl() ) { if(HasSelection()) DelRight(); SwFEShell::SplitNode(); } const SwPageDesc *pDesc = pPageDesc ? FindPageDescByName( *pPageDesc, sal_True ) : 0; if( pDesc ) { SwFmtPageDesc aDesc( pDesc ); aDesc.SetNumOffset( nPgNum ); SetAttrItem( aDesc ); } else SetAttrItem( SvxFmtBreakItem(SVX_BREAK_PAGE_BEFORE, RES_BREAK) ); EndUndo(UNDO_UI_INSERT_PAGE_BREAK); } } /*------------------------------------------------------------------------ Beschreibung: Einfuegen harter Zeilenumbruch; Selektionen werden ueberschrieben ------------------------------------------------------------------------*/ void SwWrtShell::InsertLineBreak() { ResetCursorStack(); if( _CanInsert() ) { if(HasSelection()) DelRight(); const sal_Unicode cIns = 0x0A; SvxAutoCorrect* pACorr = lcl_IsAutoCorr(); if( pACorr ) AutoCorrect( *pACorr, cIns ); else SwWrtShell::Insert( String( cIns ) ); } } /*------------------------------------------------------------------------ Beschreibung: Einfuegen harter Spaltenumbruch; Selektionen werden ueberschrieben ------------------------------------------------------------------------*/ void SwWrtShell::InsertColumnBreak() { ACT_KONTEXT(this); ResetCursorStack(); if( _CanInsert() ) { StartUndo(UNDO_UI_INSERT_COLUMN_BREAK); if ( !IsCrsrInTbl() ) { if(HasSelection()) DelRight(); SwFEShell::SplitNode( sal_False, sal_False ); } SetAttrItem(SvxFmtBreakItem(SVX_BREAK_COLUMN_BEFORE, RES_BREAK)); EndUndo(UNDO_UI_INSERT_COLUMN_BREAK); } } /*------------------------------------------------------------------------ Beschreibung: Einfuegen Fussnote Parameter: rStr -- optionales Fussnotenzeichen ------------------------------------------------------------------------*/ void SwWrtShell::InsertFootnote(const String &rStr, sal_Bool bEndNote, sal_Bool bEdit ) { ResetCursorStack(); if( _CanInsert() ) { if(HasSelection()) { //collapse cursor to the end if(!IsCrsrPtAtEnd()) SwapPam(); ClearMark(); } SwFmtFtn aFootNote( bEndNote ); if(rStr.Len()) aFootNote.SetNumStr( rStr ); SetAttrItem(aFootNote); if( bEdit ) { // zur Bearbeiung des Fussnotentextes Left(CRSR_SKIP_CHARS, sal_False, 1, sal_False ); GotoFtnTxt(); } } } /*------------------------------------------------------------------------ Beschreibung: SplitNode; hier auch, da - selektierter Inhalt geloescht wird; - der Cursorstack gfs. zurueckgesetzt wird. ------------------------------------------------------------------------*/ void SwWrtShell::SplitNode( sal_Bool bAutoFmt, sal_Bool bCheckTableStart ) { ResetCursorStack(); if( _CanInsert() ) { ACT_KONTEXT(this); rView.GetEditWin().FlushInBuffer(); sal_Bool bHasSel = HasSelection(); if( bHasSel ) { StartUndo( UNDO_INSERT ); DelRight(); } SwFEShell::SplitNode( bAutoFmt, bCheckTableStart ); if( bHasSel ) EndUndo( UNDO_INSERT ); } } /*------------------------------------------------------------------------ Beschreibung: Numerierung anschalten Parameter: Optionale Angabe eines Namens fuer die benannte Liste; dieser bezeichnet eine Position, wenn er in eine Zahl konvertierbar ist und kleiner ist als nMaxRules. -------------------------------------------------------------------------*/ // zum Testen der CharFormate an der Numerierung // extern void SetNumChrFmt( SwWrtShell*, SwNumRules& ); // -> #i40041# // --> OD 2005-10-25 #b6340308# // Preconditions (as far as OD has figured out): // - is sal_False, if is sal_True // - is sal_False, if is sal_False // Behavior of method is determined by the current situation at the current // cursor position in the document. void SwWrtShell::NumOrBulletOn(sal_Bool bNum) { // determine numbering rule found at current cursor position in the document. const SwNumRule* pCurRule = GetNumRuleAtCurrCrsrPos(); StartUndo(UNDO_NUMORNONUM); const SwNumRule * pNumRule = pCurRule; // --> OD 2005-10-25 #b6340308# // - activate outline rule respectively turning on outline rule for // current text node. But, only for turning on a numbering ( == sal_True). // - overwrite found numbering rule at current cursor position, if // no numbering rule can be retrieved from the paragraph style. bool bContinueFoundNumRule( false ); bool bActivateOutlineRule( false ); int nActivateOutlineLvl( MAXLEVEL ); // only relevant, if == sal_True SwTxtFmtColl * pColl = GetCurTxtFmtColl(); if ( pColl ) { // --> OD 2005-10-25 #b6340308# - retrieve numbering rule at paragraph // style, which is found at current cursor position in the document. SwNumRule* pCollRule = pDoc->FindNumRulePtr(pColl->GetNumRule().GetValue()); // --> OD 2005-10-25 #125993# - The outline numbering rule isn't allowed // to be derived from a parent paragraph style to a derived one. // Thus check, if the found outline numbering rule is directly // set at the paragraph style . If not, set to NULL if ( pCollRule && pCollRule == GetDoc()->GetOutlineNumRule() ) { const SwNumRule* pDirectCollRule = pDoc->FindNumRulePtr(pColl->GetNumRule( sal_False ).GetValue()); if ( !pDirectCollRule ) { pCollRule = 0; } } // --> OD 2006-11-20 #i71764# // Document setting OUTLINE_LEVEL_YIELDS_OUTLINE_RULE has no influence // any more. // if ( pCollRule == NULL && // NO_NUMBERING != pColl->GetOutlineLevel() && // GetDoc()->get(IDocumentSettingAccess::OUTLINE_LEVEL_YIELDS_OUTLINE_RULE) ) // { // pCollRule = GetDoc()->GetOutlineNumRule(); // } // <-- // <-- // --> OD 2005-10-25 #b6340308# if ( !pCollRule ) { pNumRule = pCollRule; } // --> OD 2006-06-12 #b6435904# // no activation or continuation of outline numbering in Writer/Web document else if ( bNum && !dynamic_cast(GetDoc()->GetDocShell()) && pCollRule == GetDoc()->GetOutlineNumRule() ) // <-- { if ( pNumRule == pCollRule ) { // check, if text node at current cursor positioned is counted. // If not, let it been counted. Then it has to be checked, // of the outline numbering has to be activated or continued. SwTxtNode* pTxtNode = GetCrsr()->GetPoint()->nNode.GetNode().GetTxtNode(); if ( pTxtNode && !pTxtNode->IsCountedInList() ) { // check, if numbering of the outline level of the paragraph // style is active. If not, activate this outline level. nActivateOutlineLvl = pColl->GetAssignedOutlineStyleLevel(); ASSERT( pColl->IsAssignedToListLevelOfOutlineStyle(), //<-end,zhaojianwei " - paragraph style with outline rule, but no outline level" ); if ( pColl->IsAssignedToListLevelOfOutlineStyle() && //<-end,zhaojianwei pCollRule->Get( static_cast(nActivateOutlineLvl) ).GetNumberingType() == SVX_NUM_NUMBER_NONE ) { // activate outline numbering bActivateOutlineRule = true; } else { // turning on outline numbering at current cursor position bContinueFoundNumRule = true; } } else { // --> OD 2009-08-27 #i101234# // activate outline numbering, because from the precondition // it's known, that == sal_False bActivateOutlineRule = true; nActivateOutlineLvl = pColl->GetAssignedOutlineStyleLevel();//<-end,zhaojianwei } } else if ( !pNumRule ) { // --> OD 2009-08-27 #i101234# // Check, if corresponding list level of the outline numbering // has already a numbering format set. nActivateOutlineLvl = pColl->GetAssignedOutlineStyleLevel();//<-end,zhaojianwei,need further consideration if ( pCollRule->Get( static_cast(nActivateOutlineLvl) ).GetNumberingType() == SVX_NUM_NUMBER_NONE ) { // activate outline numbering, because from the precondition // it's known, that == sal_False bActivateOutlineRule = true; } else { // turning on outline numbering at current cursor position bContinueFoundNumRule = true; } // <-- } else { // check, if numbering of the outline level of the paragraph // style is active. If not, activate this outline level. nActivateOutlineLvl = pColl->GetAssignedOutlineStyleLevel();//#outline level,zhaojianwei ASSERT( pColl->IsAssignedToListLevelOfOutlineStyle(),//#outline level,zhaojianwei " - paragraph style with outline rule, but no outline level" ); if ( pColl->IsAssignedToListLevelOfOutlineStyle() &&//#outline level,zhaojianwei pCollRule->Get( static_cast(nActivateOutlineLvl) ).GetNumberingType() == SVX_NUM_NUMBER_NONE ) { // activate outline numbering bActivateOutlineRule = true; } else { // turning on outline numbering at current cursor position bContinueFoundNumRule = true; } } pNumRule = pCollRule; } } // --> OD 2005-10-25 #b6340308# // Only automatic numbering/bullet rules should be changed. // Note: The outline numbering rule is also an automatic one. It's only // changed, if it has to be activated. if ( pNumRule ) { if ( !pNumRule->IsAutoRule() ) { pNumRule = 0; } else if ( pNumRule == GetDoc()->GetOutlineNumRule() && !bActivateOutlineRule && !bContinueFoundNumRule ) { pNumRule = 0; } } // <-- // --> OD 2005-10-25 #b6340308# // Search for a previous numbering/bullet rule to continue it. // --> OD 2008-03-18 #refactorlists# String sContinuedListId; if ( !pNumRule ) { pNumRule = GetDoc()->SearchNumRule( *GetCrsr()->GetPoint(), false, bNum, false, 0, sContinuedListId ); bContinueFoundNumRule = pNumRule != 0; } // <-- if (pNumRule) { SwNumRule aNumRule(*pNumRule); // --> OD 2005-10-25 #b6340308# // do not change found numbering/bullet rule, if it should only be continued. if ( !bContinueFoundNumRule ) { SwTxtNode * pTxtNode = GetCrsr()->GetPoint()->nNode.GetNode().GetTxtNode(); if (pTxtNode) { // --> OD 2005-10-26 #b6340308# - use above retrieve outline // level, if outline numbering has to be activated. int nLevel = bActivateOutlineRule ////#outline level,zhaojianwei,need more consideration ? nActivateOutlineLvl : pTxtNode->GetActualListLevel(); // <-- if (nLevel < 0) nLevel = 0; if (nLevel >= MAXLEVEL) nLevel = MAXLEVEL - 1; SwNumFmt aFmt(aNumRule.Get(static_cast(nLevel))); if (bNum) aFmt.SetNumberingType(SVX_NUM_ARABIC); else { // --> OD 2008-06-03 #i63395# // Only apply user defined default bullet font if ( numfunc::IsDefBulletFontUserDefined() ) { const Font* pFnt = &numfunc::GetDefBulletFont(); aFmt.SetBulletFont( pFnt ); } // <-- aFmt.SetBulletChar( numfunc::GetBulletChar(static_cast(nLevel))); aFmt.SetNumberingType(SVX_NUM_CHAR_SPECIAL); // #i93908# clear suffix for bullet lists aFmt.SetPrefix(::rtl::OUString()); aFmt.SetSuffix(::rtl::OUString()); } aNumRule.Set(static_cast(nLevel), aFmt); } } // <-- // --> OD 2008-02-08 #newlistlevelattrs# // reset indent attribute on applying list style // --> OD 2008-03-27 #refactorlists# SetCurNumRule( aNumRule, false, sContinuedListId, true ); // <-- } else { // --> OD 2009-08-27 #i95907# const SvxNumberFormat::SvxNumPositionAndSpaceMode ePosAndSpaceMode( numfunc::GetDefaultPositionAndSpaceMode() ); // --> OD 2008-02-11 #newlistlevelattrs# SwNumRule aNumRule( GetUniqueNumRuleName(), ePosAndSpaceMode ); // <-- // <-- // Zeichenvorlage an die Numerierung haengen SwCharFmt* pChrFmt; SwDocShell* pDocSh = GetView().GetDocShell(); // --> OD 2008-06-03 #i63395# // Only apply user defined default bullet font const Font* pFnt = numfunc::IsDefBulletFontUserDefined() ? &numfunc::GetDefBulletFont() : 0; // <-- if (bNum) { pChrFmt = GetCharFmtFromPool( RES_POOLCHR_NUM_LEVEL ); } else { pChrFmt = GetCharFmtFromPool( RES_POOLCHR_BUL_LEVEL ); } const SwTxtNode* pTxtNode = GetCrsr()->GetPoint()->nNode.GetNode().GetTxtNode(); const SwTwips nWidthOfTabs = pTxtNode ? pTxtNode->GetWidthOfLeadingTabs() : 0; GetDoc()->RemoveLeadingWhiteSpace( *GetCrsr()->GetPoint() ); const bool bHtml = 0 != PTR_CAST(SwWebDocShell, pDocSh); const bool bRightToLeft = IsInRightToLeftText(); for( sal_uInt8 nLvl = 0; nLvl < MAXLEVEL; ++nLvl ) { SwNumFmt aFmt( aNumRule.Get( nLvl ) ); aFmt.SetCharFmt( pChrFmt ); if (! bNum) { // --> OD 2008-06-03 #i63395# // Only apply user defined default bullet font if ( pFnt ) { aFmt.SetBulletFont( pFnt ); } aFmt.SetBulletChar( numfunc::GetBulletChar(nLvl) ); aFmt.SetNumberingType(SVX_NUM_CHAR_SPECIAL); // #i93908# clear suffix for bullet lists aFmt.SetPrefix(::rtl::OUString()); aFmt.SetSuffix(::rtl::OUString()); } // --> OD 2009-08-26 #i95907# if ( ePosAndSpaceMode == SvxNumberFormat::LABEL_WIDTH_AND_POSITION ) { if(bHtml && nLvl) { // 1/2" fuer HTML aFmt.SetLSpace(720); aFmt.SetAbsLSpace(nLvl * 720); } else if ( nWidthOfTabs > 0 ) { aFmt.SetAbsLSpace(nWidthOfTabs + nLvl * 720); } } // <-- // --> FME 2005-01-21 #i38904# Default alignment for // numbering/bullet should be rtl in rtl paragraph: if ( bRightToLeft ) { aFmt.SetNumAdjust( SVX_ADJUST_RIGHT ); } // <-- aNumRule.Set( nLvl, aFmt ); } // --> OD 2009-08-26 #i95907# if ( pTxtNode && ePosAndSpaceMode == SvxNumberFormat::LABEL_ALIGNMENT ) { // --> OD 2010-01-05 #b6884103# // short nTxtNodeFirstLineOffset( 0 ); // pTxtNode->GetFirstLineOfsWithNum( nTxtNodeFirstLineOffset ); // const SwTwips nTxtNodeIndent = pTxtNode->GetLeftMarginForTabCalculation() + // nTxtNodeFirstLineOffset; const SwTwips nTxtNodeIndent = pTxtNode->GetAdditionalIndentForStartingNewList(); // <-- if ( ( nTxtNodeIndent + nWidthOfTabs ) != 0 ) { // --> OD 2010-05-05 #i111172# // If text node is already inside a list, assure that the indents // are the same. Thus, adjust the indent change value by subtracting // indents of to be applied list style. SwTwips nIndentChange = nTxtNodeIndent + nWidthOfTabs; if ( pTxtNode->GetNumRule() ) { const SwNumFmt aFmt( aNumRule.Get( 0 ) ); if ( aFmt.GetPositionAndSpaceMode() == SvxNumberFormat::LABEL_ALIGNMENT ) { nIndentChange -= aFmt.GetIndentAt() + aFmt.GetFirstLineIndent(); } } // <-- aNumRule.ChangeIndent( nIndentChange ); } } // <-- // --> OD 2008-02-08 #newlistlevelattrs# // reset indent attribute on applying list style // --> OD 2008-03-17 #refactorlists# // start new list SetCurNumRule( aNumRule, true, String(), true ); // <-- } EndUndo(UNDO_NUMORNONUM); } // <- #i40041# void SwWrtShell::NumOn() { NumOrBulletOn(sal_True); } void SwWrtShell::NumOrBulletOff() { const SwNumRule * pCurNumRule = GetNumRuleAtCurrCrsrPos(); if (pCurNumRule) { if (pCurNumRule->IsOutlineRule()) { SwNumRule aNumRule(*pCurNumRule); SwTxtNode * pTxtNode = GetCrsr()->GetPoint()->nNode.GetNode().GetTxtNode(); if (pTxtNode) { sal_uInt16 nLevel = sal::static_int_cast(pTxtNode->GetActualListLevel()); SwNumFmt aFmt(aNumRule.Get(nLevel)); aFmt.SetNumberingType(SVX_NUM_NUMBER_NONE); aNumRule.Set(nLevel, aFmt); // --> OD 2008-03-17 #refactorlists# // no start or continuation of a list - the outline style is only changed. SetCurNumRule( aNumRule, false ); // <-- } } else { DelNumRules(); } // --> OD 2005-10-24 #126346# - Cursor can not be anymore in front of // a label, because numbering/bullet is switched off. SetInFrontOfLabel( sal_False ); // <-- } } // <- #i29560# /*------------------------------------------------------------------------ Beschreibung: Default-Bulletliste erfragen ------------------------------------------------------------------------*/ void SwWrtShell::BulletOn() { NumOrBulletOn(sal_False); } /*-------------------------------------------------- --------------------------------------------------*/ SelectionType SwWrtShell::GetSelectionType() const { // ContentType kann nicht ermittelt werden innerhalb einer // Start-/Endactionklammerung. // Da es keinen ungueltigen Wert gibt, wird TEXT geliefert. // Der Wert ist egal, da in EndAction ohnehin aktualisiert wird. if ( BasicActionPend() ) return IsSelFrmMode() ? nsSelectionType::SEL_FRM : nsSelectionType::SEL_TXT; SwView &_rView = ((SwView&)GetView()); if (_rView.GetPostItMgr() && _rView.GetPostItMgr()->HasActiveSidebarWin() ) return nsSelectionType::SEL_POSTIT; int nCnt; // Insertion of a text frame is not a DrawMode if ( !_rView.GetEditWin().IsFrmAction() && (IsObjSelected() || (_rView.IsDrawMode() && !IsFrmSelected()) )) { if (GetDrawView()->IsTextEdit()) nCnt = nsSelectionType::SEL_DRW_TXT; else { if (GetView().IsFormMode()) // Nur Forms selektiert nCnt = nsSelectionType::SEL_DRW_FORM; else nCnt = nsSelectionType::SEL_DRW; // Irgendein Draw-Objekt if (_rView.IsBezierEditMode()) nCnt |= nsSelectionType::SEL_BEZ; else if( GetDrawView()->GetContext() == SDRCONTEXT_MEDIA ) nCnt |= nsSelectionType::SEL_MEDIA; if (svx::checkForSelectedCustomShapes( const_cast(GetDrawView()), true /* bOnlyExtruded */ )) { nCnt |= nsSelectionType::SEL_EXTRUDED_CUSTOMSHAPE; } sal_uInt32 nCheckStatus = 0; if (svx::checkForSelectedFontWork( const_cast(GetDrawView()), nCheckStatus )) { nCnt |= nsSelectionType::SEL_FONTWORK; } } return nCnt; } nCnt = GetCntType(); if ( IsFrmSelected() ) { if (_rView.IsDrawMode()) _rView.LeaveDrawCreate(); // Aufraeumen (Bug #45639) if ( !(nCnt & (CNT_GRF | CNT_OLE)) ) return nsSelectionType::SEL_FRM; } if ( IsCrsrInTbl() ) nCnt |= nsSelectionType::SEL_TBL; if ( IsTableMode() ) nCnt |= (nsSelectionType::SEL_TBL | nsSelectionType::SEL_TBL_CELLS); // Do not pop up numbering toolbar, if the text node has a numbering of type SVX_NUM_NUMBER_NONE. const SwNumRule* pNumRule = GetNumRuleAtCurrCrsrPos(); if ( pNumRule ) { const SwTxtNode* pTxtNd = GetCrsr()->GetPoint()->nNode.GetNode().GetTxtNode(); if ( pTxtNd && pTxtNd->IsInList() ) { const SwNumFmt& rFmt = pNumRule->Get(sal::static_int_cast< sal_uInt8, sal_Int32>(pTxtNd->GetActualListLevel())); if ( SVX_NUM_NUMBER_NONE != rFmt.GetNumberingType() ) nCnt |= nsSelectionType::SEL_NUM; } } return nCnt; } /*------------------------------------------------------------------------ Beschreibung: Finden der TextCollection mit dem Name rCollname Return: Pointer auf die Collection oder 0, wenn keine TextCollection mit diesem Namen existiert oder diese eine Defaultvorlage ist. ------------------------------------------------------------------------*/ SwTxtFmtColl *SwWrtShell::GetParaStyle(const String &rCollName, GetStyle eCreate ) { SwTxtFmtColl* pColl = FindTxtFmtCollByName( rCollName ); if( !pColl && GETSTYLE_NOCREATE != eCreate ) { sal_uInt16 nId = SwStyleNameMapper::GetPoolIdFromUIName( rCollName, nsSwGetPoolIdFromName::GET_POOLID_TXTCOLL ); if( USHRT_MAX != nId || GETSTYLE_CREATEANY == eCreate ) pColl = GetTxtCollFromPool( nId ); } return pColl; } /*------------------------------------------------------------------------ Beschreibung: Finden der Zeichenvorlage mit dem Name rCollname Return: Pointer auf die Collection oder 0, wenn keine Zeichenvorlage mit diesem Namen existiert oder diese eine Defaultvorlage oder automatische Vorlage ist. ------------------------------------------------------------------------*/ SwCharFmt *SwWrtShell::GetCharStyle(const String &rFmtName, GetStyle eCreate ) { SwCharFmt* pFmt = FindCharFmtByName( rFmtName ); if( !pFmt && GETSTYLE_NOCREATE != eCreate ) { sal_uInt16 nId = SwStyleNameMapper::GetPoolIdFromUIName( rFmtName, nsSwGetPoolIdFromName::GET_POOLID_CHRFMT ); if( USHRT_MAX != nId || GETSTYLE_CREATEANY == eCreate ) pFmt = (SwCharFmt*)GetFmtFromPool( nId ); } return pFmt; } /*------------------------------------------------------------------------ Beschreibung: Finden des Tabellenformates mit dem Name rFmtname Return: Pointer auf das Format oder 0, wenn kein Rahmenformat mit diesem Namen existiert oder dieses eine Defaultformat oder automatisches Format ist. ------------------------------------------------------------------------*/ SwFrmFmt *SwWrtShell::GetTblStyle(const String &rFmtName) { SwFrmFmt *pFmt = 0; for( sal_uInt16 i = GetTblFrmFmtCount(); i; ) if( !( pFmt = &GetTblFrmFmt( --i ) )->IsDefault() && pFmt->GetName() == rFmtName && IsUsed( *pFmt ) ) return pFmt; return 0; } /*------------------------------------------------------------------------ Beschreibung: Anwenden der Vorlagen ------------------------------------------------------------------------*/ void SwWrtShell::SetPageStyle(const String &rCollName) { if( !SwCrsrShell::HasSelection() && !IsSelFrmMode() && !IsObjSelected() ) { SwPageDesc* pDesc = FindPageDescByName( rCollName, sal_True ); if( pDesc ) ChgCurPageDesc( *pDesc ); } } /*------------------------------------------------------------------------ Beschreibung: Zugriff Vorlagen ------------------------------------------------------------------------*/ String SwWrtShell::GetCurPageStyle( const sal_Bool bCalcFrm ) const { return GetPageDesc(GetCurPageDesc( bCalcFrm )).GetName(); } /*------------------------------------------------------------------------ Beschreibung: Aktuelle Vorlage anhand der geltenden Attribute aendern ------------------------------------------------------------------------*/ void SwWrtShell::QuickUpdateStyle() { SwTxtFmtColl *pColl = GetCurTxtFmtColl(); // Standard kann nicht geaendert werden if(pColl && !pColl->IsDefault()) { FillByEx(pColl); // Vorlage auch anwenden, um harte Attributierung // zu entfernen SetTxtFmtColl(pColl); } } void SwWrtShell::AutoUpdatePara(SwTxtFmtColl* pColl, const SfxItemSet& rStyleSet) { SfxItemSet aCoreSet( GetAttrPool(), RES_CHRATR_BEGIN, RES_CHRATR_END - 1, RES_PARATR_BEGIN, RES_PARATR_END - 1, RES_FRMATR_BEGIN, RES_FRMATR_END - 1, SID_ATTR_TABSTOP_POS, SID_ATTR_TABSTOP_POS, SID_ATTR_TABSTOP_DEFAULTS, SID_ATTR_TABSTOP_DEFAULTS, SID_ATTR_TABSTOP_OFFSET, SID_ATTR_TABSTOP_OFFSET, SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, SID_ATTR_PARA_MODEL, SID_ATTR_PARA_KEEP, SID_ATTR_PARA_PAGENUM, SID_ATTR_PARA_PAGENUM, 0 ); GetCurAttr( aCoreSet ); sal_Bool bReset = sal_False; SfxItemIter aParaIter( aCoreSet ); const SfxPoolItem* pParaItem = aParaIter.FirstItem(); while( pParaItem ) { if(!IsInvalidItem(pParaItem)) { sal_uInt16 nWhich = pParaItem->Which(); if(SFX_ITEM_SET == aCoreSet.GetItemState(nWhich) && SFX_ITEM_SET == rStyleSet.GetItemState(nWhich)) { aCoreSet.ClearItem(nWhich); bReset = sal_True; } } pParaItem = aParaIter.NextItem(); } StartAction(); if(bReset) { ResetAttr(); SetAttrSet(aCoreSet); } pDoc->ChgFmt(*pColl, rStyleSet ); EndAction(); } /*-----------------12.03.97 12.24------------------- --------------------------------------------------*/ void SwWrtShell::AutoUpdateFrame( SwFrmFmt* pFmt, const SfxItemSet& rStyleSet ) { StartAction(); ResetFlyFrmAttr( 0, &rStyleSet ); pFmt->SetFmtAttr( rStyleSet ); EndAction(); } void SwWrtShell::AutoCorrect( SvxAutoCorrect& rACorr, sal_Unicode cChar ) { ResetCursorStack(); if(_CanInsert()) { sal_Bool bStarted = sal_False; if(HasSelection()) { // nur hier klammern, da das normale Insert schon an der // Editshell geklammert ist StartAllAction(); StartUndo(UNDO_INSERT); bStarted = sal_True; DelRight(); } SwEditShell::AutoCorrect( rACorr, IsInsMode(), cChar ); if(bStarted) { EndAllAction(); EndUndo(UNDO_INSERT); } } } /* * eine Art kontrollierter copy ctor */ SwWrtShell::SwWrtShell( SwWrtShell& rSh, Window *_pWin, SwView &rShell ) : SwFEShell( rSh, _pWin ), COMMON_INI_LIST { BITFLD_INI_LIST SET_CURR_SHELL( this ); SetSfxViewShell( (SfxViewShell *)&rShell ); SetFlyMacroLnk( LINK(this, SwWrtShell, ExecFlyMac) ); // place the cursor on the first field... IFieldmark *pBM = NULL; if ( IsFormProtected() && ( pBM = GetFieldmarkAfter( ) ) !=NULL ) { GotoFieldmark(pBM); } } SwWrtShell::SwWrtShell( SwDoc& rDoc, Window *_pWin, SwView &rShell, const SwViewOption *pViewOpt ) : SwFEShell( rDoc, _pWin, pViewOpt), COMMON_INI_LIST { BITFLD_INI_LIST SET_CURR_SHELL( this ); SetSfxViewShell( (SfxViewShell *)&rShell ); SetFlyMacroLnk( LINK(this, SwWrtShell, ExecFlyMac) ); } /* * ctor */ SwWrtShell::~SwWrtShell() { SET_CURR_SHELL( this ); while(IsModePushed()) PopMode(); while(PopCrsr(sal_False)) ; SwTransferable::ClearSelection( *this ); } sal_Bool SwWrtShell::Pop( sal_Bool bOldCrsr ) { sal_Bool bRet = SwCrsrShell::Pop( bOldCrsr ); if( bRet && IsSelection() ) { fnSetCrsr = &SwWrtShell::SetCrsrKillSel; fnKillSel = &SwWrtShell::ResetSelect; } return bRet; } /*-------------------------------------------------------------------- Beschreibung: --------------------------------------------------------------------*/ bool SwWrtShell::CanInsert() { // #123922# The original expression looks sleek, but it is not. Using the mathematical or ('|') // instead of the logical one ('||') forces the compiler to evaluate all conditions to allow or-ing // them together (yes, he could do better). Using the logical or allows to return on the first // failing statement instead. // // return (!(IsSelFrmMode() | IsObjSelected() | (GetView().GetDrawFuncPtr() != NULL) | (GetView().GetPostItMgr()->GetActiveSidebarWin()!= NULL))); if(IsSelFrmMode()) { return false; } if(IsObjSelected()) { return false; } if(GetView().GetDrawFuncPtr()) { return false; } if(GetView().GetPostItMgr()->GetActiveSidebarWin()) { return false; } return true; } // -------------- void SwWrtShell::ChgDBData(const SwDBData& aDBData) { SwEditShell::ChgDBData(aDBData); //notify the db-beamer if available GetView().NotifyDBChanged(); } String SwWrtShell::GetSelDescr() const { String aResult; int nSelType = GetSelectionType(); switch (nSelType) { case nsSelectionType::SEL_GRF: aResult = SW_RES(STR_GRAPHIC); break; case nsSelectionType::SEL_FRM: { const SwFrmFmt * pFrmFmt = GetCurFrmFmt(); if (pFrmFmt) aResult = pFrmFmt->GetDescription(); } break; case nsSelectionType::SEL_DRW: { aResult = SW_RES(STR_DRAWING_OBJECTS); } break; default: if (0 != pDoc) aResult = GetCrsrDescr(); } return aResult; } void SwWrtShell::ApplyViewOptions( const SwViewOption &rOpt ) { SwFEShell::ApplyViewOptions( rOpt ); //#i115062# invalidate meta character slot GetView().GetViewFrame()->GetBindings().Invalidate( FN_VIEW_META_CHARS ); } /* vim: set noet sw=4 ts=4: */