xref: /aoo4110/main/svx/source/engine3d/camera3d.cxx (revision b1cdbd2c)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svx.hxx"
#include <svx/camera3d.hxx>
#include <tools/stream.hxx>

/*************************************************************************
|*
|* Konstruktor
|*
\************************************************************************/

Camera3D::Camera3D(const basegfx::B3DPoint& rPos, const basegfx::B3DPoint& rLookAt,
				   double fFocalLen, double fBankAng) :
	aResetPos(rPos),
	aResetLookAt(rLookAt),
	fResetFocalLength(fFocalLen),
	fResetBankAngle(fBankAng),
	fBankAngle(fBankAng),
	bAutoAdjustProjection(sal_True)
{
	SetVPD(0);
	SetPosition(rPos);
	SetLookAt(rLookAt);
	SetFocalLength(fFocalLen);
}

/*************************************************************************
|*
|* Default-Konstruktor
|*
\************************************************************************/

Camera3D::Camera3D()
{
	basegfx::B3DPoint aVector3D(0.0 ,0.0 ,1.0);
	Camera3D(aVector3D, basegfx::B3DPoint());
}

/*************************************************************************
|*
|* Konstruktor
|*
\************************************************************************/

void Camera3D::Reset()
{
	SetVPD(0);
	fBankAngle = fResetBankAngle;
	SetPosition(aResetPos);
	SetLookAt(aResetLookAt);
	SetFocalLength(fResetFocalLength);
}

/*************************************************************************
|*
|* Defaultwerte fuer Reset setzen
|*
\************************************************************************/

void Camera3D::SetDefaults(const basegfx::B3DPoint& rPos, const basegfx::B3DPoint& rLookAt,
							double fFocalLen, double fBankAng)
{
	aResetPos			= rPos;
	aResetLookAt		= rLookAt;
	fResetFocalLength	= fFocalLen;
	fResetBankAngle 	= fBankAng;
}

/*************************************************************************
|*
|* ViewWindow setzen und PRP anpassen
|*
\************************************************************************/

void Camera3D::SetViewWindow(double fX, double fY, double fW, double fH)
{
	Viewport3D::SetViewWindow(fX, fY, fW, fH);
	if ( bAutoAdjustProjection )
		SetFocalLength(fFocalLength);
}

/*************************************************************************
|*
|* Kameraposition setzen
|*
\************************************************************************/

void Camera3D::SetPosition(const basegfx::B3DPoint& rNewPos)
{
	if ( rNewPos != aPosition )
	{
		aPosition = rNewPos;
		SetVRP(aPosition);
		SetVPN(aPosition - aLookAt);
		SetBankAngle(fBankAngle);
	}
}

/*************************************************************************
|*
|* Blickpunkt setzen
|*
\************************************************************************/

void Camera3D::SetLookAt(const basegfx::B3DPoint& rNewLookAt)
{
	if ( rNewLookAt != aLookAt )
	{
		aLookAt = rNewLookAt;
		SetVPN(aPosition - aLookAt);
		SetBankAngle(fBankAngle);
	}
}

/*************************************************************************
|*
|* Position und Blickpunkt setzen
|*
\************************************************************************/

void Camera3D::SetPosAndLookAt(const basegfx::B3DPoint& rNewPos,
							   const basegfx::B3DPoint& rNewLookAt)
{
	if ( rNewPos != aPosition || rNewLookAt != aLookAt )
	{
		aPosition = rNewPos;
		aLookAt = rNewLookAt;

		SetVRP(aPosition);
		SetVPN(aPosition - aLookAt);
		SetBankAngle(fBankAngle);
	}
}

/*************************************************************************
|*
|* seitlichen Neigungswinkel setzen
|*
\************************************************************************/

void Camera3D::SetBankAngle(double fAngle)
{
	basegfx::B3DVector aDiff(aPosition - aLookAt);
	basegfx::B3DVector aPrj(aDiff);
	fBankAngle = fAngle;

	if ( aDiff.getY() == 0 )
	{
		aPrj.setY(-1.0);
	}
	else
	{	// aPrj = Projektion von aDiff auf die XZ-Ebene
		aPrj.setY(0.0);

		if ( aDiff.getY() < 0.0 )
		{
			aPrj = -aPrj;
		}
	}

	// von aDiff nach oben zeigenden View-Up-Vektor berechnen
	aPrj = aPrj.getPerpendicular(aDiff);
	aPrj = aPrj.getPerpendicular(aDiff);
	aDiff.normalize();

	// auf Z-Achse rotieren, dort um BankAngle drehen und zurueck
	basegfx::B3DHomMatrix aTf;
	const double fV(sqrt(aDiff.getY() * aDiff.getY() + aDiff.getZ() * aDiff.getZ()));

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(aDiff.getY() / fV);
		const double fCos(aDiff.getZ() / fV);

		aTemp.set(1, 1, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(2, 1, fSin);
		aTemp.set(1, 2, -fSin);

		aTf *= aTemp;
	}

	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(-aDiff.getX());
		const double fCos(fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	aTf.rotate(0.0, 0.0, fBankAngle);

	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(aDiff.getX());
		const double fCos(fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(-aDiff.getY() / fV);
		const double fCos(aDiff.getZ() / fV);

		aTemp.set(1, 1, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(2, 1, fSin);
		aTemp.set(1, 2, -fSin);

		aTf *= aTemp;
	}

	SetVUV(aTf * aPrj);
}

/*************************************************************************
|*
|* Brennweite setzen
|*
\************************************************************************/

void Camera3D::SetFocalLength(double fLen)
{
	if ( fLen < 5 )
		fLen = 5;
	SetPRP(basegfx::B3DPoint(0.0, 0.0, fLen / 35.0 * aViewWin.W));
	fFocalLength = fLen;
}

/*************************************************************************
|*
|* Um die Kameraposition drehen, LookAt wird dabei veraendert
|*
\************************************************************************/

void Camera3D::Rotate(double fHAngle, double fVAngle)
{
	basegfx::B3DHomMatrix aTf;
	basegfx::B3DVector aDiff(aLookAt - aPosition);
	const double fV(sqrt(aDiff.getX() * aDiff.getX() + aDiff.getZ() * aDiff.getZ()));

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(aDiff.getZ() / fV);
		const double fCos(aDiff.getX() / fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	{
		aTf.rotate(0.0, 0.0, fVAngle);
	}

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(-aDiff.getZ() / fV);
		const double fCos(aDiff.getX() / fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	{
		aTf.rotate(0.0, fHAngle, 0.0);
	}

	aDiff *= aTf;
	SetLookAt(aPosition + aDiff);
}


/*************************************************************************
|*
|* Um den Blickpunkt drehen, Position wird dabei veraendert
|*
\************************************************************************/

void Camera3D::RotateAroundLookAt(double fHAngle, double fVAngle)
{
	basegfx::B3DHomMatrix aTf;
	basegfx::B3DVector aDiff(aPosition - aLookAt);
	const double fV(sqrt(aDiff.getX() * aDiff.getX() + aDiff.getZ() * aDiff.getZ()));

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(aDiff.getZ() / fV);
		const double fCos(aDiff.getX() / fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	{
		aTf.rotate(0.0, 0.0, fVAngle);
	}

	if ( fV != 0.0 )
	{
		basegfx::B3DHomMatrix aTemp;
		const double fSin(-aDiff.getZ() / fV);
		const double fCos(aDiff.getX() / fV);

		aTemp.set(0, 0, fCos);
		aTemp.set(2, 2, fCos);
		aTemp.set(0, 2, fSin);
		aTemp.set(2, 0, -fSin);

		aTf *= aTemp;
	}

	{
		aTf.rotate(0.0, fHAngle, 0.0);
	}

	aDiff *= aTf;
	SetPosition(aLookAt + aDiff);
}

/*************************************************************************
|*
|* FG: ??? Setzt wohl die Projektionsebene in eine bestimmte Tiefe
|*
\************************************************************************/

void Camera3D::SetFocalLengthWithCorrect(double fLen)
{
	if ( fLen < 5.0 )
	{
		fLen = 5.0;
	}

	SetPRP(basegfx::B3DPoint(0.0, 0.0, aPRP.getZ() * fLen / fFocalLength));
	fFocalLength = fLen;
}

// eof