xref: /aoo4110/main/svx/source/svdraw/svdotxtr.cxx (revision b1cdbd2c)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_svx.hxx"
26 
27 #include <svx/svdotext.hxx>
28 #include "svx/svditext.hxx"
29 #include <svx/svdtrans.hxx>
30 #include <svx/svdogrp.hxx>
31 #include <svx/svdopath.hxx>
32 #include <svx/svdoutl.hxx>
33 #include <svx/svdpage.hxx>   // fuer Convert
34 #include <svx/svdmodel.hxx>  // fuer Convert
35 #include <editeng/outliner.hxx>
36 #include <svx/sdr/properties/itemsettools.hxx>
37 #include <svx/sdr/properties/properties.hxx>
38 #include <basegfx/polygon/b2dpolypolygontools.hxx>
39 #include <svl/itemset.hxx>
40 #include <svx/svditer.hxx>
41 #include <drawinglayer/processor2d/textaspolygonextractor2d.hxx>
42 #include <svx/sdr/contact/viewcontact.hxx>
43 #include <svx/xflclit.hxx>
44 #include <svx/xlnclit.hxx>
45 #include <svx/xlnwtit.hxx>
46 
47 ////////////////////////////////////////////////////////////////////////////////////////////////////
48 //
49 //  @@@@@@ @@@@@ @@   @@ @@@@@@  @@@@  @@@@@  @@@@@@
50 //    @@   @@    @@@ @@@   @@   @@  @@ @@  @@     @@
51 //    @@   @@     @@@@@    @@   @@  @@ @@  @@     @@
52 //    @@   @@@@    @@@     @@   @@  @@ @@@@@      @@
53 //    @@   @@     @@@@@    @@   @@  @@ @@  @@     @@
54 //    @@   @@    @@@ @@@   @@   @@  @@ @@  @@ @@  @@
55 //    @@   @@@@@ @@   @@   @@    @@@@  @@@@@   @@@@
56 //
57 //  Transformationen
58 //
59 ////////////////////////////////////////////////////////////////////////////////////////////////////
60 
NbcSetSnapRect(const Rectangle & rRect)61 void SdrTextObj::NbcSetSnapRect(const Rectangle& rRect)
62 {
63 	if (aGeo.nDrehWink!=0 || aGeo.nShearWink!=0) {
64 		Rectangle aSR0(GetSnapRect());
65 		long nWdt0=aSR0.Right()-aSR0.Left();
66 		long nHgt0=aSR0.Bottom()-aSR0.Top();
67 		long nWdt1=rRect.Right()-rRect.Left();
68 		long nHgt1=rRect.Bottom()-rRect.Top();
69 		SdrTextObj::NbcResize(maSnapRect.TopLeft(),Fraction(nWdt1,nWdt0),Fraction(nHgt1,nHgt0));
70 		SdrTextObj::NbcMove(Size(rRect.Left()-aSR0.Left(),rRect.Top()-aSR0.Top()));
71 	} else {
72 		long nHDist=GetTextLeftDistance()+GetTextRightDistance();
73 		long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
74 		long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
75 		long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
76 		long nTWdt1=rRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
77 		long nTHgt1=rRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;
78 		aRect=rRect;
79 		ImpJustifyRect(aRect);
80 
81         // #115391#
82         AdaptTextMinSize();
83 
84         if (bTextFrame && (pModel==NULL || !pModel->IsPasteResize()))
85         {
86             if(SDRTEXTFIT_RESIZEATTR == GetFitToSize())
87             {
88                 NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
89             }
90 
91             NbcAdjustTextFrameWidthAndHeight();
92         }
93 
94         ImpCheckShear();
95         SetRectsDirty();
96     }
97 }
98 
GetLogicRect() const99 const Rectangle& SdrTextObj::GetLogicRect() const
100 {
101 	return aRect;
102 }
103 
NbcSetLogicRect(const Rectangle & rRect)104 void SdrTextObj::NbcSetLogicRect(const Rectangle& rRect)
105 {
106 	long nHDist=GetTextLeftDistance()+GetTextRightDistance();
107 	long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
108 	long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
109 	long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
110 	long nTWdt1=rRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
111 	long nTHgt1=rRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;
112 	aRect=rRect;
113 	ImpJustifyRect(aRect);
114 
115     // #115391#
116     AdaptTextMinSize();
117 
118     if(bTextFrame)
119     {
120         if(SDRTEXTFIT_RESIZEATTR == GetFitToSize())
121         {
122             NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
123         }
124 
125         NbcAdjustTextFrameWidthAndHeight();
126     }
127 
128     SetRectsDirty();
129 }
130 
GetRotateAngle() const131 long SdrTextObj::GetRotateAngle() const
132 {
133 	return aGeo.nDrehWink;
134 }
135 
GetShearAngle(FASTBOOL) const136 long SdrTextObj::GetShearAngle(FASTBOOL /*bVertical*/) const
137 {
138 	return aGeo.nShearWink;
139 }
140 
NbcMove(const Size & rSiz)141 void SdrTextObj::NbcMove(const Size& rSiz)
142 {
143 	MoveRect(aRect,rSiz);
144 	MoveRect(aOutRect,rSiz);
145 	MoveRect(maSnapRect,rSiz);
146 	SetRectsDirty(sal_True);
147 }
148 
NbcResize(const Point & rRef,const Fraction & xFact,const Fraction & yFact)149 void SdrTextObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
150 {
151 	FASTBOOL bNoShearMerk=aGeo.nShearWink==0;
152 	FASTBOOL bRota90Merk=bNoShearMerk && aGeo.nDrehWink % 9000 ==0;
153 	long nHDist=GetTextLeftDistance()+GetTextRightDistance();
154 	long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
155 	long nTWdt0=aRect.GetWidth ()-1-nHDist; if (nTWdt0<0) nTWdt0=0;
156 	long nTHgt0=aRect.GetHeight()-1-nVDist; if (nTHgt0<0) nTHgt0=0;
157 	FASTBOOL bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
158 	FASTBOOL bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
159 	if (bXMirr || bYMirr) {
160 		Point aRef1(GetSnapRect().Center());
161 		if (bXMirr) {
162 			Point aRef2(aRef1);
163 			aRef2.Y()++;
164 			NbcMirrorGluePoints(aRef1,aRef2);
165 		}
166 		if (bYMirr) {
167 			Point aRef2(aRef1);
168 			aRef2.X()++;
169 			NbcMirrorGluePoints(aRef1,aRef2);
170 		}
171 	}
172 
173 	if (aGeo.nDrehWink==0 && aGeo.nShearWink==0) {
174 		ResizeRect(aRect,rRef,xFact,yFact);
175 		if (bYMirr) {
176 			aRect.Justify();
177 			aRect.Move(aRect.Right()-aRect.Left(),aRect.Bottom()-aRect.Top());
178 			aGeo.nDrehWink=18000;
179 			aGeo.RecalcSinCos();
180 		}
181 	}
182 	else
183 	{
184 		// #100663# aRect is NOT initialized for lines (polgon objects with two
185 		// exceptionally handled points). Thus, after this call the text rotaion is
186 		// gone. This error must be present since day one of this old drawing layer.
187 		// It's astonishing that noone discovered it earlier.
188 		// Polygon aPol(Rect2Poly(aRect,aGeo));
189 		// Polygon aPol(Rect2Poly(GetSnapRect(), aGeo));
190 
191 		// #101412# go back to old method, side effects are impossible
192 		// to calculate.
193 		Polygon aPol(Rect2Poly(aRect,aGeo));
194 
195 		for(sal_uInt16 a(0); a < aPol.GetSize(); a++)
196 		{
197 			 ResizePoint(aPol[a], rRef, xFact, yFact);
198 		}
199 
200 		if(bXMirr != bYMirr)
201 		{
202 			// Polygon wenden und etwas schieben
203 			Polygon aPol0(aPol);
204 
205 			aPol[0] = aPol0[1];
206 			aPol[1] = aPol0[0];
207 			aPol[2] = aPol0[3];
208 			aPol[3] = aPol0[2];
209 			aPol[4] = aPol0[1];
210 		}
211 
212 		Poly2Rect(aPol, aRect, aGeo);
213 	}
214 
215 	if (bRota90Merk) {
216 		FASTBOOL bRota90=aGeo.nDrehWink % 9000 ==0;
217 		if (!bRota90) { // Scheinbar Rundungsfehler: Korregieren
218 			long a=NormAngle360(aGeo.nDrehWink);
219 			if (a<4500) a=0;
220 			else if (a<13500) a=9000;
221 			else if (a<22500) a=18000;
222 			else if (a<31500) a=27000;
223 			else a=0;
224 			aGeo.nDrehWink=a;
225 			aGeo.RecalcSinCos();
226 		}
227 		if (bNoShearMerk!=(aGeo.nShearWink==0)) { // Shear ggf. korregieren wg. Rundungsfehler
228 			aGeo.nShearWink=0;
229 			aGeo.RecalcTan();
230 		}
231 	}
232 
233     ImpJustifyRect(aRect);
234 
235     long nTWdt1=aRect.GetWidth ()-1-nHDist; if (nTWdt1<0) nTWdt1=0;
236     long nTHgt1=aRect.GetHeight()-1-nVDist; if (nTHgt1<0) nTHgt1=0;
237 
238     // #115391#
239     AdaptTextMinSize();
240 
241     if(bTextFrame && (!pModel || !pModel->IsPasteResize()))
242     {
243         if(SDRTEXTFIT_RESIZEATTR == GetFitToSize())
244         {
245             NbcResizeTextAttributes(Fraction(nTWdt1,nTWdt0),Fraction(nTHgt1,nTHgt0));
246         }
247 
248         NbcAdjustTextFrameWidthAndHeight();
249     }
250 
251     ImpCheckShear();
252     SetRectsDirty();
253 }
254 
NbcRotate(const Point & rRef,long nWink,double sn,double cs)255 void SdrTextObj::NbcRotate(const Point& rRef, long nWink, double sn, double cs)
256 {
257 	SetGlueReallyAbsolute(sal_True);
258 	long dx=aRect.Right()-aRect.Left();
259 	long dy=aRect.Bottom()-aRect.Top();
260 	Point aP(aRect.TopLeft());
261 	RotatePoint(aP,rRef,sn,cs);
262 	aRect.Left()=aP.X();
263 	aRect.Top()=aP.Y();
264 	aRect.Right()=aRect.Left()+dx;
265 	aRect.Bottom()=aRect.Top()+dy;
266 	if (aGeo.nDrehWink==0) {
267 		aGeo.nDrehWink=NormAngle360(nWink);
268 		aGeo.nSin=sn;
269 		aGeo.nCos=cs;
270 	} else {
271 		aGeo.nDrehWink=NormAngle360(aGeo.nDrehWink+nWink);
272 		aGeo.RecalcSinCos();
273 	}
274 	SetRectsDirty();
275 	NbcRotateGluePoints(rRef,nWink,sn,cs);
276 	SetGlueReallyAbsolute(sal_False);
277 }
278 
NbcShear(const Point & rRef,long nWink,double tn,FASTBOOL bVShear)279 void SdrTextObj::NbcShear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear)
280 {
281 	SetGlueReallyAbsolute(sal_True);
282 
283 	// #75889# when this is a SdrPathObj aRect maybe not initialized
284 	Polygon aPol(Rect2Poly(aRect.IsEmpty() ? GetSnapRect() : aRect, aGeo));
285 
286 	sal_uInt16 nPointCount=aPol.GetSize();
287 	for (sal_uInt16 i=0; i<nPointCount; i++) {
288 		 ShearPoint(aPol[i],rRef,tn,bVShear);
289 	}
290 	Poly2Rect(aPol,aRect,aGeo);
291 	ImpJustifyRect(aRect);
292 	if (bTextFrame) {
293 		NbcAdjustTextFrameWidthAndHeight();
294 	}
295 	ImpCheckShear();
296 	SetRectsDirty();
297 	NbcShearGluePoints(rRef,nWink,tn,bVShear);
298 	SetGlueReallyAbsolute(sal_False);
299 }
300 
NbcMirror(const Point & rRef1,const Point & rRef2)301 void SdrTextObj::NbcMirror(const Point& rRef1, const Point& rRef2)
302 {
303 	SetGlueReallyAbsolute(sal_True);
304 	FASTBOOL bNoShearMerk=aGeo.nShearWink==0;
305 	FASTBOOL bRota90Merk=sal_False;
306 	if (bNoShearMerk &&
307 		(rRef1.X()==rRef2.X() || rRef1.Y()==rRef2.Y() ||
308 		 Abs(rRef1.X()-rRef2.X())==Abs(rRef1.Y()-rRef2.Y()))) {
309 		bRota90Merk=aGeo.nDrehWink % 9000 ==0;
310 	}
311 	Polygon aPol(Rect2Poly(aRect,aGeo));
312 	sal_uInt16 i;
313 	sal_uInt16 nPntAnz=aPol.GetSize();
314 	for (i=0; i<nPntAnz; i++) {
315 		 MirrorPoint(aPol[i],rRef1,rRef2);
316 	}
317 	// Polygon wenden und etwas schieben
318 	Polygon aPol0(aPol);
319 	aPol[0]=aPol0[1];
320 	aPol[1]=aPol0[0];
321 	aPol[2]=aPol0[3];
322 	aPol[3]=aPol0[2];
323 	aPol[4]=aPol0[1];
324 	Poly2Rect(aPol,aRect,aGeo);
325 
326 	if (bRota90Merk) {
327 		FASTBOOL bRota90=aGeo.nDrehWink % 9000 ==0;
328 		if (bRota90Merk && !bRota90) { // Scheinbar Rundungsfehler: Korregieren
329 			long a=NormAngle360(aGeo.nDrehWink);
330 			if (a<4500) a=0;
331 			else if (a<13500) a=9000;
332 			else if (a<22500) a=18000;
333 			else if (a<31500) a=27000;
334 			else a=0;
335 			aGeo.nDrehWink=a;
336 			aGeo.RecalcSinCos();
337 		}
338 	}
339 	if (bNoShearMerk!=(aGeo.nShearWink==0)) { // Shear ggf. korregieren wg. Rundungsfehler
340 		aGeo.nShearWink=0;
341 		aGeo.RecalcTan();
342 	}
343 
344 	ImpJustifyRect(aRect);
345 	if (bTextFrame) {
346 		NbcAdjustTextFrameWidthAndHeight();
347 	}
348 	ImpCheckShear();
349 	SetRectsDirty();
350 	NbcMirrorGluePoints(rRef1,rRef2);
351 	SetGlueReallyAbsolute(sal_False);
352 }
353 
354 //////////////////////////////////////////////////////////////////////////////
355 
ImpConvertContainedTextToSdrPathObjs(bool bToPoly) const356 SdrObject* SdrTextObj::ImpConvertContainedTextToSdrPathObjs(bool bToPoly) const
357 {
358 	SdrObject* pRetval = 0;
359 
360 	if(!ImpCanConvTextToCurve())
361 	{
362 		// suppress HelpTexts from PresObj's
363 		return 0;
364 	}
365 
366 	// get primitives
367 	const drawinglayer::primitive2d::Primitive2DSequence xSequence(GetViewContact().getViewIndependentPrimitive2DSequence());
368 
369 	if(xSequence.hasElements())
370 	{
371 		// create an extractor with neutral ViewInformation
372 		const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
373 		drawinglayer::processor2d::TextAsPolygonExtractor2D aExtractor(aViewInformation2D);
374 
375 		// extract text as polygons
376 		aExtractor.process(xSequence);
377 
378 		// get results
379 		const drawinglayer::processor2d::TextAsPolygonDataNodeVector& rResult = aExtractor.getTarget();
380 		const sal_uInt32 nResultCount(rResult.size());
381 
382 		if(nResultCount)
383 		{
384 			// prepare own target
385 			SdrObjGroup* pGroup = new SdrObjGroup();
386 			SdrObjList* pObjectList = pGroup->GetSubList();
387 
388 			// process results
389 			for(sal_uInt32 a(0); a < nResultCount; a++)
390 			{
391 				const drawinglayer::processor2d::TextAsPolygonDataNode& rCandidate = rResult[a];
392 				basegfx::B2DPolyPolygon aPolyPolygon(rCandidate.getB2DPolyPolygon());
393 
394 				if(aPolyPolygon.count())
395 				{
396 					// take care of wanted polygon type
397 					if(bToPoly)
398 					{
399 						if(aPolyPolygon.areControlPointsUsed())
400 						{
401 							aPolyPolygon = basegfx::tools::adaptiveSubdivideByAngle(aPolyPolygon);
402 						}
403 					}
404 					else
405 					{
406 						if(!aPolyPolygon.areControlPointsUsed())
407 						{
408 							aPolyPolygon = basegfx::tools::expandToCurve(aPolyPolygon);
409 						}
410 					}
411 
412 					// create ItemSet with object attributes
413 					SfxItemSet aAttributeSet(GetObjectItemSet());
414 					SdrPathObj* pPathObj = 0;
415 
416 					// always clear objectshadow; this is included in the extraction
417 					aAttributeSet.Put(SdrShadowItem(false));
418 
419 					if(rCandidate.getIsFilled())
420 					{
421 						// set needed items
422 						aAttributeSet.Put(XFillColorItem(String(), Color(rCandidate.getBColor())));
423 						aAttributeSet.Put(XLineStyleItem(XLINE_NONE));
424 						aAttributeSet.Put(XFillStyleItem(XFILL_SOLID));
425 
426 						// create filled SdrPathObj
427 						pPathObj = new SdrPathObj(OBJ_PATHFILL, aPolyPolygon);
428 					}
429 					else
430 					{
431 						// set needed items
432 						aAttributeSet.Put(XLineColorItem(String(), Color(rCandidate.getBColor())));
433 						aAttributeSet.Put(XLineStyleItem(XLINE_SOLID));
434 						aAttributeSet.Put(XLineWidthItem(0));
435 						aAttributeSet.Put(XFillStyleItem(XFILL_NONE));
436 
437 						// create line SdrPathObj
438 						pPathObj = new SdrPathObj(OBJ_PATHLINE, aPolyPolygon);
439 					}
440 
441 					// copy basic information from original
442 					pPathObj->ImpSetAnchorPos(GetAnchorPos());
443 					pPathObj->NbcSetLayer(GetLayer());
444 
445 					if(GetModel())
446 					{
447 						pPathObj->SetModel(GetModel());
448 						pPathObj->NbcSetStyleSheet(GetStyleSheet(), true);
449 					}
450 
451 					// apply prepared ItemSet and add to target
452 					pPathObj->SetMergedItemSet(aAttributeSet);
453 					pObjectList->InsertObject(pPathObj);
454 				}
455 			}
456 
457 			// postprocess; if no result and/or only one object, simplify
458 			if(!pObjectList->GetObjCount())
459 			{
460 				delete pGroup;
461 			}
462 			else if(1 == pObjectList->GetObjCount())
463 			{
464 				pRetval = pObjectList->RemoveObject(0);
465 				delete pGroup;
466 			}
467 			else
468 			{
469 				pRetval = pGroup;
470 			}
471 		}
472 	}
473 
474 	return pRetval;
475 }
476 
477 //////////////////////////////////////////////////////////////////////////////
478 
DoConvertToPolyObj(sal_Bool bBezier,bool bAddText) const479 SdrObject* SdrTextObj::DoConvertToPolyObj(sal_Bool bBezier, bool bAddText) const
480 {
481     if(bAddText)
482     {
483     	return ImpConvertContainedTextToSdrPathObjs(!bBezier);
484     }
485 
486     return 0;
487 }
488 
ImpCanConvTextToCurve() const489 bool SdrTextObj::ImpCanConvTextToCurve() const
490 {
491 	return !IsOutlText();
492 }
493 
ImpConvertMakeObj(const basegfx::B2DPolyPolygon & rPolyPolygon,sal_Bool bClosed,sal_Bool bBezier,sal_Bool bNoSetAttr) const494 SdrObject* SdrTextObj::ImpConvertMakeObj(const basegfx::B2DPolyPolygon& rPolyPolygon, sal_Bool bClosed, sal_Bool bBezier, sal_Bool bNoSetAttr) const
495 {
496 	SdrObjKind ePathKind = bClosed ? OBJ_PATHFILL : OBJ_PATHLINE;
497 	basegfx::B2DPolyPolygon aB2DPolyPolygon(rPolyPolygon);
498 
499 	// #i37011#
500 	if(!bBezier)
501 	{
502 		aB2DPolyPolygon = basegfx::tools::adaptiveSubdivideByAngle(aB2DPolyPolygon);
503 		ePathKind = bClosed ? OBJ_POLY : OBJ_PLIN;
504 	}
505 
506 	SdrPathObj* pPathObj = new SdrPathObj(ePathKind, aB2DPolyPolygon);
507 
508 	if(bBezier)
509 	{
510 		// create bezier curves
511 		pPathObj->SetPathPoly(basegfx::tools::expandToCurve(pPathObj->GetPathPoly()));
512 	}
513 
514 	if(pPathObj)
515 	{
516 		pPathObj->ImpSetAnchorPos(aAnchor);
517 		pPathObj->NbcSetLayer(SdrLayerID(GetLayer()));
518 
519 		if(pModel)
520 		{
521 			pPathObj->SetModel(pModel);
522 
523 			if(!bNoSetAttr)
524 			{
525 				sdr::properties::ItemChangeBroadcaster aC(*pPathObj);
526 
527 				pPathObj->ClearMergedItem();
528 				pPathObj->SetMergedItemSet(GetObjectItemSet());
529 				pPathObj->GetProperties().BroadcastItemChange(aC);
530 				pPathObj->NbcSetStyleSheet(GetStyleSheet(), sal_True);
531 			}
532 		}
533 	}
534 
535 	return pPathObj;
536 }
537 
ImpConvertAddText(SdrObject * pObj,FASTBOOL bBezier) const538 SdrObject* SdrTextObj::ImpConvertAddText(SdrObject* pObj, FASTBOOL bBezier) const
539 {
540 	if(!ImpCanConvTextToCurve())
541     {
542         return pObj;
543     }
544 
545 	SdrObject* pText = ImpConvertContainedTextToSdrPathObjs(!bBezier);
546 
547     if(!pText)
548     {
549         return pObj;
550     }
551 
552 	if(!pObj)
553     {
554         return pText;
555     }
556 
557 	if(pText->IsGroupObject())
558     {
559         // is already group object, add partial shape in front
560 		SdrObjList* pOL=pText->GetSubList();
561 		pOL->InsertObject(pObj,0);
562 
563         return pText;
564 	}
565     else
566     {
567         // not yet a group, create one and add partial and new shapes
568 		SdrObjGroup* pGrp=new SdrObjGroup;
569 		SdrObjList* pOL=pGrp->GetSubList();
570 		pOL->InsertObject(pObj);
571 		pOL->InsertObject(pText);
572 
573         return pGrp;
574 	}
575 }
576 
577 //////////////////////////////////////////////////////////////////////////////
578 // eof
579