1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23 #ifndef _DCONTACT_HXX
24 #define _DCONTACT_HXX
25
26 #include <svx/svdobj.hxx>
27 #include <svx/svdovirt.hxx>
28 #include <swtypes.hxx>
29 #include <fmtanchr.hxx>
30 #include <frmfmt.hxx>
31 #include <list>
32
33 #include "calbck.hxx"
34 #include <anchoreddrawobject.hxx>
35
36 class SfxPoolItem;
37 class SwFrmFmt;
38 class SwFlyFrmFmt;
39 class SwFlyFrm;
40 class SwFrm;
41 class SwPageFrm;
42 class SwVirtFlyDrawObj;
43 class SwFmtAnchor;
44 class SwFlyDrawObj;
45 class SwRect;
46 class SwDrawContact;
47 struct SwPosition;
48 class SwIndex;
49 class SdrTextObj;
50
51 //Der Umgekehrte Weg: Sucht das Format zum angegebenen Objekt.
52 //Wenn das Object ein SwVirtFlyDrawObj ist so wird das Format von
53 //selbigem besorgt.
54 //Anderfalls ist es eben ein einfaches Zeichenobjekt. Diese hat einen
55 //UserCall und der ist Client vom gesuchten Format.
56 //Implementierung in dcontact.cxx
57 SW_DLLPUBLIC SwFrmFmt *FindFrmFmt( SdrObject *pObj );
FindFrmFmt(const SdrObject * pObj)58 inline const SwFrmFmt *FindFrmFmt( const SdrObject *pObj )
59 { return ::FindFrmFmt( (SdrObject*)pObj ); }
60 sal_Bool HasWrap( const SdrObject* pObj );
61
62 void setContextWritingMode( SdrObject* pObj, SwFrm* pAnchor );
63
64 //Bei Aenderungen das Objekt aus dem ContourCache entfernen.
65 //Implementierung in TxtFly.Cxx
66 void ClrContourCache( const SdrObject *pObj );
67
68 // liefert BoundRect inklusive Abstand
69 // --> OD 2006-08-15 #i68520# - change naming
70 SwRect GetBoundRectOfAnchoredObj( const SdrObject* pObj );
71 // <--
72
73 //Liefert den UserCall ggf. vom Gruppenobjekt
74 // OD 2004-03-31 #i26791# - change return type
75 SwContact* GetUserCall( const SdrObject* );
76
77 // liefert sal_True falls das SrdObject ein Marquee-Object (Lauftext) ist
78 sal_Bool IsMarqueeTextObj( const SdrObject& rObj );
79
80 //Basisklasse fuer die folgenden KontaktObjekte (Rahmen+Zeichenobjekte)
81 class SwContact : public SdrObjUserCall, public SwClient
82 {
83 // OD 05.09.2003 #112039# - boolean, indicating destruction of contact object
84 // important note: boolean has to be set at the beginning of each destructor
85 // in the subclasses using method <SetInDTOR()>.
86 bool mbInDTOR;
87
88 /** method to move object to visible/invisible layer
89
90 OD 21.08.2003 #i18447#
91 Implementation for the public method <MoveObjToVisibleLayer(..)>
92 and <MoveObjToInvisibleLayer(..)>
93 If object is in invisble respectively visible layer, its moved to
94 the corresponding visible respectively invisible layers.
95 For group object the members are individually moved to the corresponding
96 layer, because <SdrObjGroup::GetLayer()> does return 0, if members
97 aren't on the same layer as the group object, and
98 <SdrObjGroup::SetLayer(..)|NbcSetLayer(..)> sets also the layer of
99 the members.
100 OD 2004-01-15 #110582# - moved from subclass <SwDrawContact>
101
102 @author OD
103
104 @param _bToVisible
105 input parameter - boolean indicating, if object has to be moved to
106 visible (== true) or invisible (== false) layer.
107
108 @param _pDrawObj
109 input parameter, which will be changed - drawing object, which will
110 change its layer.
111 */
112 void _MoveObjToLayer( const bool _bToVisible,
113 SdrObject* _pDrawObj );
114
115 protected:
116 // OD 05.09.2003 #112039# - accessor to set member <mbInDTOR>
117 void SetInDTOR();
118
119 public:
120 TYPEINFO();
121
122 //Fuer den Reader, es wir nur die Verbindung hergestellt.
123 SwContact( SwFrmFmt *pToRegisterIn );
124 virtual ~SwContact();
125
126 // OD 2004-03-29 #i26791#
127 virtual const SwAnchoredObject* GetAnchoredObj( const SdrObject* _pSdrObj ) const = 0;
128 virtual SwAnchoredObject* GetAnchoredObj( SdrObject* _pSdrObj ) = 0;
129
130 // OD 13.05.2003 #108784# - made methods virtual and not inline
131 // OD 2004-04-01 #i26791# - made methods pure virtual
132 virtual const SdrObject *GetMaster() const = 0;
133 virtual SdrObject *GetMaster() = 0;
134 virtual void SetMaster( SdrObject* _pNewMaster ) = 0;
135
GetFmt()136 SwFrmFmt *GetFmt(){ return (SwFrmFmt*)GetRegisteredIn(); }
GetFmt() const137 const SwFrmFmt *GetFmt() const
138 { return (const SwFrmFmt*)GetRegisteredIn(); }
139
140 // OD 05.09.2003 #112039# - accessor for member <mbInDTOR>
141 bool IsInDTOR() const;
142
143 /** method to move drawing object to corresponding visible layer
144
145 OD 21.08.2003 #i18447#
146 uses method <_MoveObjToLayer(..)>
147 OD 2004-01-15 #110582# - moved from subclass <SwDrawContact> and made virtual
148
149 @author OD
150
151 @param _pDrawObj
152 drawing object, which will be moved to the visible layer
153 */
154 virtual void MoveObjToVisibleLayer( SdrObject* _pDrawObj );
155
156 /** method to move drawing object to corresponding invisible layer
157
158 OD 21.08.2003 #i18447#
159 uses method <_MoveObjToLayer(..)>
160 OD 2004-01-15 #110582# - moved from subclass <SwDrawContact> and made virtual.
161
162 @author OD
163
164 @param _pDrawObj
165 drawing object, which will be moved to the visible layer
166 */
167 virtual void MoveObjToInvisibleLayer( SdrObject* _pDrawObj );
168
169 // -------------------------------------------------------------------------
170 // OD 2004-01-16 #110582# - some virtual helper methods for information
171 // about the object (Writer fly frame resp. drawing object)
GetAnchorFmt() const172 const SwFmtAnchor& GetAnchorFmt() const
173 {
174 ASSERT( GetFmt(),
175 "<SwContact::GetAnchorFmt()> - no frame format -> crash" );
176
177 return GetFmt()->GetAnchor();
178 }
179
GetAnchorId() const180 RndStdIds GetAnchorId() const { return GetAnchorFmt().GetAnchorId(); }
ObjAnchoredAtPage() const181 bool ObjAnchoredAtPage() const { return GetAnchorId() == FLY_AT_PAGE; }
ObjAnchoredAtFly() const182 bool ObjAnchoredAtFly() const { return GetAnchorId() == FLY_AT_FLY; }
ObjAnchoredAtPara() const183 bool ObjAnchoredAtPara() const { return GetAnchorId() == FLY_AT_PARA; }
ObjAnchoredAtChar() const184 bool ObjAnchoredAtChar() const { return GetAnchorId() == FLY_AT_CHAR; }
ObjAnchoredAsChar() const185 bool ObjAnchoredAsChar() const { return GetAnchorId() == FLY_AS_CHAR; }
186
GetCntntAnchor() const187 const SwPosition& GetCntntAnchor() const
188 {
189 ASSERT( GetAnchorFmt().GetCntntAnchor(),
190 "<SwContact::GetCntntAnchor()> - no content anchor -> crash" );
191
192 return *(GetAnchorFmt().GetCntntAnchor());
193 }
194
195 const SwIndex& GetCntntAnchorIndex() const;
196
197 // -------------------------------------------------------------------------
198
199 /** get data collection of anchored objects, handled by with contact
200
201 OD 2004-08-23 #110810#
202
203 @author
204 */
205 virtual void GetAnchoredObjs( std::list<SwAnchoredObject*>& _roAnchoredObjs ) const = 0;
206
207 /** get minimum order number of anchored objects handled by with contact
208
209 OD 2004-08-24 #110810#
210
211 @author
212 */
213 sal_uInt32 GetMinOrdNum() const;
214
215 /** get maximum order number of anchored objects handled by with contact
216
217 OD 2004-08-24 #110810#
218
219 @author
220 */
221 sal_uInt32 GetMaxOrdNum() const;
222 };
223
224 //KontactObjekt fuer die Verbindung zwischen Rahmen bzw. deren Formaten
225 //im StarWriter (SwClient) und den Zeichenobjekten des Drawing (SdrObjUserCall)
226
227 class SW_DLLPUBLIC SwFlyDrawContact : public SwContact
228 {
229 private:
230 // OD 2004-04-01 #i26791#
231 SwFlyDrawObj* mpMasterObj;
232
233 protected:
234 // virtuelle Methoden von SwClient
235 virtual void Modify( const SfxPoolItem* pOld, const SfxPoolItem *pNew );
236
237 public:
238 TYPEINFO();
239
240 //Legt das DrawObjekt an und meldet es beim Model an.
241 SwFlyDrawContact( SwFlyFrmFmt* pToRegisterIn, SdrModel* pMod );
242 virtual ~SwFlyDrawContact();
243
244 // OD 2004-03-29 #i26791#
245 virtual const SwAnchoredObject* GetAnchoredObj( const SdrObject* _pSdrObj ) const;
246 virtual SwAnchoredObject* GetAnchoredObj( SdrObject* _pSdrObj );
247
248 // OD 2004-04-01 #i26791#
249 virtual const SdrObject* GetMaster() const;
250 virtual SdrObject* GetMaster();
251 virtual void SetMaster( SdrObject* _pNewMaster );
252
253 // OD 2004-01-16 #110582# - override methods to control Writer fly frames,
254 // which are linked, and to assure that all objects anchored at/inside the
255 // Writer fly frame are also made visible/invisible.
256 virtual void MoveObjToVisibleLayer( SdrObject* _pDrawObj );
257 virtual void MoveObjToInvisibleLayer( SdrObject* _pDrawObj );
258
259 /** get data collection of anchored objects handled by with contact
260
261 OD 2004-08-23 #110810#
262
263 @author
264 */
265 virtual void GetAnchoredObjs( std::list<SwAnchoredObject*>& _roAnchoredObjs ) const;
266 };
267
268 // OD 16.05.2003 #108784# - new class for re-direct methods calls at a 'virtual'
269 // drawing object to its referenced object.
270 class SwDrawVirtObj : public SdrVirtObj
271 {
272 private:
273 // data for connection to writer layout
274 // OD 2004-03-25 #i26791# - anchored drawing object instance for the
275 // 'virtual' drawing object
276 SwAnchoredDrawObject maAnchoredDrawObj;
277
278 // writer-drawing contact object the 'virtual' drawing object is controlled by.
279 // This object is also the <UserCall> of the drawing object, if it's
280 // inserted into the drawing layer.
281 SwDrawContact& mrDrawContact;
282
283 using SdrVirtObj::GetPlusHdl;
284
285 protected:
286 // AW: Need own sdr::contact::ViewContact since AnchorPos from parent is
287 // not used but something own (top left of new SnapRect minus top left
288 // of original SnapRect)
289 virtual sdr::contact::ViewContact* CreateObjectSpecificViewContact();
290
291 public:
292 TYPEINFO();
293
294 SwDrawVirtObj( SdrObject& _rNewObj,
295 SwDrawContact& _rDrawContact );
296 virtual ~SwDrawVirtObj();
297
298 // access to offset
299 // OD 30.06.2003 #108784# - virtual!!!
300 virtual const Point GetOffset() const;
301
302 virtual SdrObject* Clone() const;
303 virtual void operator=( const SdrObject& rObj );
304
305 // connection to writer layout
306 // OD 2004-03-29 #i26791#
307 const SwAnchoredObject* GetAnchoredObj() const;
308 SwAnchoredObject* AnchoredObj();
309 const SwFrm* GetAnchorFrm() const;
310 SwFrm* AnchorFrm();
311 void RemoveFromWriterLayout();
312
313 // connection to drawing layer
314 void AddToDrawingPage();
315 void RemoveFromDrawingPage();
316
317 // is 'virtual' drawing object connected to writer layout and
318 // to drawing layer.
319 bool IsConnected() const;
320
321 virtual void NbcSetAnchorPos(const Point& rPnt);
322
323 // #108784#
324 // All overloaded methods which need to use the offset
325 virtual void RecalcBoundRect();
326 virtual ::basegfx::B2DPolyPolygon TakeXorPoly() const;
327 virtual ::basegfx::B2DPolyPolygon TakeContour() const;
328 virtual SdrHdl* GetHdl(sal_uInt32 nHdlNum) const;
329 virtual SdrHdl* GetPlusHdl(const SdrHdl& rHdl, sal_uInt16 nPlNum) const;
330 virtual void NbcMove(const Size& rSiz);
331 virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact);
332 virtual void NbcRotate(const Point& rRef, long nWink, double sn, double cs);
333 virtual void NbcMirror(const Point& rRef1, const Point& rRef2);
334 virtual void NbcShear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear);
335 virtual void Move(const Size& rSiz);
336 virtual void Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact);
337 virtual void Rotate(const Point& rRef, long nWink, double sn, double cs);
338 virtual void Mirror(const Point& rRef1, const Point& rRef2);
339 virtual void Shear(const Point& rRef, long nWink, double tn, FASTBOOL bVShear);
340 virtual void RecalcSnapRect();
341 virtual const Rectangle& GetSnapRect() const;
342 virtual void SetSnapRect(const Rectangle& rRect);
343 virtual void NbcSetSnapRect(const Rectangle& rRect);
344 virtual const Rectangle& GetLogicRect() const;
345 virtual void SetLogicRect(const Rectangle& rRect);
346 virtual void NbcSetLogicRect(const Rectangle& rRect);
347 virtual Point GetSnapPoint(sal_uInt32 i) const;
348 virtual Point GetPoint(sal_uInt32 i) const;
349 virtual void NbcSetPoint(const Point& rPnt, sal_uInt32 i);
350
351 // #108784#
352 virtual FASTBOOL HasTextEdit() const;
353
354 // OD 17.06.2003 #108784# - overload 'layer' methods
355 virtual SdrLayerID GetLayer() const;
356 virtual void NbcSetLayer(SdrLayerID nLayer);
357 virtual void SetLayer(SdrLayerID nLayer);
358
359 // FullDrag support
360 virtual bool supportsFullDrag() const;
361 virtual SdrObject* getFullDragClone() const;
362
363 // #i97197#
364 virtual void SetBoundRectDirty();
365 virtual const Rectangle& GetCurrentBoundRect() const;
366 virtual const Rectangle& GetLastBoundRect() const;
367 };
368
369 // OD 26.06.2003 #108784#
370 bool CheckControlLayer( const SdrObject *pObj );
371
372 //KontactObjekt fuer die Verbindung von Formaten als Repraesentanten der
373 //Zeichenobjekte im StarWriter (SwClient) und den Objekten selbst im Drawing
374 //(SdrObjUserCall).
375
376 // --> OD 2006-01-18 #129959#
377 class NestedUserCallHdl;
378 // <--
379
380 class SwDrawContact : public SwContact
381 {
382 private:
383 // OD 2004-03-25 #i26791# - anchored drawing object instance for the
384 // 'master' drawing object
385 SwAnchoredDrawObject maAnchoredDrawObj;
386
387 // OD 16.05.2003 #108784# - data structure for collecting 'virtual'
388 // drawing object supporting drawing objects in headers/footers.
389 std::list<SwDrawVirtObj*> maDrawVirtObjs;
390
391 // OD 2004-04-01 #i26791# - boolean indicating set 'master' drawing
392 // object has been cleared.
393 bool mbMasterObjCleared : 1;
394
395 // OD 10.10.2003 #112299# - internal flag to indicate that disconnect
396 // from layout is in progress
397 bool mbDisconnectInProgress : 1;
398
399 // --> OD 2006-01-18 #129959#
400 // Needed data for handling of nested <SdrObjUserCall> events in
401 // method <_Changed(..)>
402 bool mbUserCallActive : 1;
403 // event type, which is handled for <mpSdrObjHandledByCurrentUserCall>.
404 // Note: value only valid, if <mbUserCallActive> is sal_True.
405 SdrUserCallType meEventTypeOfCurrentUserCall;
406
407 friend class NestedUserCallHdl;
408 // <--
409
410 // unary function used by <list> iterator to find a disconnected 'virtual'
411 // drawing object
412 struct UsedOrUnusedVirtObjPred
413 {
414 bool mbUsedPred;
UsedOrUnusedVirtObjPredSwDrawContact::UsedOrUnusedVirtObjPred415 UsedOrUnusedVirtObjPred( bool _bUsed ) : mbUsedPred( _bUsed ) {};
operator ()SwDrawContact::UsedOrUnusedVirtObjPred416 bool operator() ( const SwDrawVirtObj* _pDrawVirtObj )
417 {
418 if ( mbUsedPred )
419 {
420 return _pDrawVirtObj->IsConnected();
421 }
422 else
423 {
424 return !_pDrawVirtObj->IsConnected();
425 }
426 }
427 };
428
429 // unary function used by <list> iterator to find a 'virtual' drawing
430 // object anchored at a given frame
431 struct VirtObjAnchoredAtFrmPred
432 {
433 const SwFrm* mpAnchorFrm;
434 VirtObjAnchoredAtFrmPred( const SwFrm& _rAnchorFrm );
435 bool operator() ( const SwDrawVirtObj* _pDrawVirtObj );
436 };
437
438 // OD 16.05.2003 #108784# - method for adding/removing 'virtual' drawing object.
439 SwDrawVirtObj* CreateVirtObj();
440 void DestroyVirtObj( SwDrawVirtObj* pVirtObj );
441 void RemoveAllVirtObjs();
442
443 // OD 2004-03-31 #i26791#
444 void _InvalidateObjs( const bool _bUpdateSortedObjsList = false );
445
446 // --> OD 2006-01-23 #124157#
447 // no copy-constructor and no assignment operator
448 SwDrawContact( const SwDrawContact& );
449 SwDrawContact& operator=( const SwDrawContact& );
450 // <--
451
452 protected:
453 // virtuelle Methoden von SwClient
454 virtual void Modify( const SfxPoolItem* pOld, const SfxPoolItem *pNew );
455
456 public:
457 TYPEINFO();
458
459 SwDrawContact( SwFrmFmt *pToRegisterIn, SdrObject *pObj );
460 virtual ~SwDrawContact();
461
462 // OD 2004-03-29 #i26791#
463 // --> OD 2005-01-06 #i30669# - no default value for parameter <_pSdrObj>
464 virtual const SwAnchoredObject* GetAnchoredObj( const SdrObject* _pSdrObj ) const;
465 virtual SwAnchoredObject* GetAnchoredObj( SdrObject* _pSdrObj );
466 // <--
467
468 // OD 2004-04-01 #i26791#
469 virtual const SdrObject* GetMaster() const;
470 virtual SdrObject* GetMaster();
471 virtual void SetMaster( SdrObject* _pNewMaster );
472
473 // OD 2004-03-29 #i26791#
474 const SwFrm* GetAnchorFrm( const SdrObject* _pDrawObj = 0L ) const;
475 SwFrm* GetAnchorFrm( SdrObject* _pDrawObj = 0L );
476
477 // --> OD 2004-06-30 #i28701# - page frame is now stored at member <maAnchoredDrawObj>
GetPageFrm() const478 inline const SwPageFrm* GetPageFrm() const
479 {
480 return maAnchoredDrawObj.GetPageFrm();
481 }
GetPageFrm()482 inline SwPageFrm* GetPageFrm()
483 {
484 return maAnchoredDrawObj.GetPageFrm();
485 }
SetPageFrm(SwPageFrm * _pNewPageFrm)486 void SetPageFrm( SwPageFrm* _pNewPageFrm )
487 {
488 return maAnchoredDrawObj.SetPageFrm( _pNewPageFrm );
489 }
490 // <--
491 void ChkPage();
492 SwPageFrm* FindPage( const SwRect &rRect );
493
494 //Fuegt das SdrObject in die Arrays (SwPageFrm und SwFrm) des Layouts ein.
495 //Der Anker wird Anhand des Attributes SwFmtAnchor bestimmt.
496 //Das Objekt wird ggf. beim alten Anker abgemeldet.
497 void ConnectToLayout( const SwFmtAnchor *pAnch = 0 );
498 // OD 27.06.2003 #108784# - method to insert 'master' drawing object
499 // into drawing page
500 void InsertMasterIntoDrawPage();
501
502 void DisconnectFromLayout( bool _bMoveMasterToInvisibleLayer = true );
503 // OD 19.06.2003 #108784# - disconnect for a dedicated drawing object -
504 // could be 'master' or 'virtual'.
505 void DisconnectObjFromLayout( SdrObject* _pDrawObj );
506 // OD 26.06.2003 #108784# - method to remove 'master' drawing object
507 // from drawing page.
508 // To be used by the undo for delete of object. Call it after method
509 // <DisconnectFromLayout( bool = true )> is already performed.
510 // Note: <DisconnectFromLayout( bool )> no longer removes the 'master'
511 // drawing object from drawing page.
512 void RemoveMasterFromDrawPage();
513
514 // OD 19.06.2003 #108784# - get drawing object ('master' or 'virtual')
515 // by frame.
516 SdrObject* GetDrawObjectByAnchorFrm( const SwFrm& _rAnchorFrm );
517
518 // virtuelle Methoden von SdrObjUserCall
519 virtual void Changed(const SdrObject& rObj, SdrUserCallType eType, const Rectangle& rOldBoundRect);
520
521 // wird von Changed() und auch vom UndoDraw benutzt, uebernimmt
522 // das Notifien von Absaetzen, die ausweichen muessen
523 void _Changed(const SdrObject& rObj, SdrUserCallType eType, const Rectangle* pOldBoundRect);
524
525 //Moved alle SW-Verbindungen zu dem neuen Master.
526 void ChangeMasterObject( SdrObject *pNewMaster );
527
528 // OD 19.06.2003 #108784#
529 SwDrawVirtObj* AddVirtObj();
530
531 // OD 20.06.2003 #108784#
532 void NotifyBackgrdOfAllVirtObjs( const Rectangle* pOldBoundRect );
533
534 /** get data collection of anchored objects, handled by with contact
535
536 OD 2004-08-23 #110810#
537
538 @author
539 */
540
541 static void GetTextObjectsFromFmt( std::list<SdrTextObj*>&, SwDoc* );
542 virtual void GetAnchoredObjs( std::list<SwAnchoredObject*>& _roAnchoredObjs ) const;
543 };
544
545 #endif
546