xref: /aoo41x/main/sw/source/ui/shells/tabsh.cxx (revision 69a74367)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"
#include <hintids.hxx>

#ifndef _ZFORLIST_HXX
#define _ZFORLIST_DECLARE_TABLE
#include <svl/zforlist.hxx>
#endif
#include <svl/stritem.hxx>
#include <svl/whiter.hxx>
#include <unotools/moduleoptions.hxx>
#include <svx/rulritem.hxx>
#include <svl/srchitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/brshitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/shaditem.hxx>
#include <editeng/spltitem.hxx>
#include <editeng/langitem.hxx>
#include <editeng/keepitem.hxx>
#include <editeng/bolnitem.hxx>
#include <editeng/colritem.hxx>
#include <editeng/frmdiritem.hxx>
#include <svx/numinf.hxx>
#include <svx/svddef.hxx>
#include <svx/svxdlg.hxx>
#include <svl/zformat.hxx>
#include <sfx2/bindings.hxx>
#include <vcl/msgbox.hxx>
#include <sfx2/request.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/objface.hxx>
#include <sfx2/sidebar/EnumContext.hxx>


#include <fmtornt.hxx>
#include <fmtclds.hxx>
#include <fmtlsplt.hxx>
#include <fmtrowsplt.hxx>
#include <fmtfsize.hxx>
#include <swmodule.hxx>
#include <wrtsh.hxx>
#include <wview.hxx>
#include <frmatr.hxx>
#include <uitool.hxx>
#include <inputwin.hxx>
#include <uiitems.hxx>
#include <usrpref.hxx>
#include <tabsh.hxx>
#include "swtablerep.hxx"
#include <tablemgr.hxx>
#include <cellatr.hxx>
#include <frmfmt.hxx>
#include <swundo.hxx>
#include <swtable.hxx>
#include <docsh.hxx>
#include <tblsel.hxx>

#include <dialog.hrc>



//!!! new: insert table
/*
#include <svx/htmlmode.hxx>
#include <modcfg.hxx>
#include <tblafmt.hxx>
#include <instable.hxx>
*/
//!!!

#ifndef _POPUP_HRC
#include <popup.hrc>
#endif
#ifndef _SHELLS_HRC
#include <shells.hrc>
#endif
#ifndef _TABLE_HRC
#include <table.hrc>
#endif
#include <cmdid.h>
#ifndef _GLOBALS_HRC
#include <globals.hrc>
#endif
#include <helpid.h>
#include <unobaseclass.hxx>

#define SwTableShell
#include <sfx2/msg.hxx>
#include <swslots.hxx>

#include "swabstdlg.hxx"
#include <table.hrc>

using namespace ::com::sun::star;

//-----------------------------------------------------------------------------

SFX_IMPL_INTERFACE(SwTableShell, SwBaseShell, SW_RES(STR_SHELLNAME_TABLE))
{
	SFX_POPUPMENU_REGISTRATION(SW_RES(MN_TAB_POPUPMENU));
	SFX_OBJECTBAR_REGISTRATION(SFX_OBJECTBAR_OBJECT, SW_RES(RID_TABLE_TOOLBOX));
}


TYPEINIT1(SwTableShell,SwBaseShell)

/************************************************************************/

const sal_uInt16 __FAR_DATA aUITableAttrRange[] =
{
	FN_PARAM_TABLE_NAME, 			FN_PARAM_TABLE_NAME,
	FN_PARAM_TABLE_HEADLINE, 		FN_PARAM_TABLE_HEADLINE,
	FN_PARAM_TABLE_SPACE, 			FN_PARAM_TABLE_SPACE,
	FN_TABLE_REP,					FN_TABLE_REP,
	SID_RULER_BORDERS,              SID_RULER_BORDERS,
	RES_LR_SPACE,					RES_UL_SPACE,
	SID_ATTR_BORDER_INNER,			SID_ATTR_BORDER_SHADOW,
	RES_BOX, 			   			RES_SHADOW,
	RES_BACKGROUND, 	   			RES_BACKGROUND,
	SID_BACKGRND_DESTINATION, 		SID_BACKGRND_DESTINATION,
	SID_HTML_MODE,					SID_HTML_MODE,
	SID_ATTR_BRUSH_ROW, 			SID_ATTR_BRUSH_TABLE,
	RES_PAGEDESC,					RES_BREAK,
	RES_KEEP,						RES_KEEP,
	RES_LAYOUT_SPLIT,				RES_LAYOUT_SPLIT,
	FN_TABLE_SET_VERT_ALIGN,		FN_TABLE_SET_VERT_ALIGN,
    RES_FRAMEDIR,                   RES_FRAMEDIR,
    RES_ROW_SPLIT,                  RES_ROW_SPLIT,
    FN_TABLE_BOX_TEXTDIRECTION,		FN_TABLE_BOX_TEXTDIRECTION,
// --> collapsing borders FME 2005-05-27 #i29550#
    RES_COLLAPSING_BORDERS,         RES_COLLAPSING_BORDERS,
// <-- collapsing borders
	0
};

const sal_uInt16* SwuiGetUITableAttrRange()
{
	return aUITableAttrRange;
}

static void lcl_SetAttr( SwWrtShell &rSh, const SfxPoolItem &rItem )
{
	SfxItemSet aSet( rSh.GetView().GetPool(), rItem.Which(), rItem.Which(), 0);
	aSet.Put( rItem );
	rSh.SetTblAttr( aSet );
}

/************************************************************************/


static SwTableRep*  lcl_TableParamToItemSet( SfxItemSet& rSet, SwWrtShell &rSh )
{
	SwFrmFmt *pFmt = rSh.GetTableFmt();
	SwTabCols aCols;
	rSh.GetTabCols( aCols );

	//Ersteinmal die einfachen Attribute besorgen.
	rSet.Put( SfxStringItem( FN_PARAM_TABLE_NAME, pFmt->GetName()));
    rSet.Put( SfxUInt16Item( FN_PARAM_TABLE_HEADLINE, rSh.GetRowsToRepeat() ) );
	rSet.Put( pFmt->GetShadow() );
	rSet.Put(SfxUInt16Item(FN_TABLE_SET_VERT_ALIGN, rSh.GetBoxAlign()));
    rSet.Put( pFmt->GetFrmDir() );

    SvxULSpaceItem aULSpace( pFmt->GetULSpace() );
	rSet.Put( aULSpace );

	sal_uInt16  nBackgroundDestination = rSh.GetViewOptions()->GetTblDest();
	rSet.Put(SwBackgroundDestinationItem(SID_BACKGRND_DESTINATION, nBackgroundDestination ));
	SvxBrushItem aBrush( RES_BACKGROUND );
// 		rSh.GetBoxBackground(aBrush);
//	rSet.Put( aBrush );
	if(rSh.GetRowBackground(aBrush))
		rSet.Put( aBrush, SID_ATTR_BRUSH_ROW );
	else
		rSet.InvalidateItem(SID_ATTR_BRUSH_ROW);
	rSh.GetTabBackground(aBrush);
	rSet.Put( aBrush, SID_ATTR_BRUSH_TABLE );

    // text direction in boxes
    SvxFrameDirectionItem aBoxDirection( FRMDIR_ENVIRONMENT, RES_FRAMEDIR );
    if(rSh.GetBoxDirection( aBoxDirection ))
        rSet.Put(aBoxDirection, FN_TABLE_BOX_TEXTDIRECTION);

    sal_Bool bTableSel = rSh.IsTableMode();
	if(!bTableSel)
	{
		rSh.StartAllAction();
		rSh.Push();
		rSh.GetView().GetViewFrame()->GetDispatcher()->Execute( FN_TABLE_SELECT_ALL, sal_False );
	}
    SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER );

		// Tabellenvariante, wenn mehrere Tabellenzellen selektiert
	rSh.GetCrsr();					//Damit GetCrsrCnt() auch das Richtige liefert
	aBoxInfo.SetTable          ((rSh.IsTableMode() && rSh.GetCrsrCnt() > 1) ||
									!bTableSel);
		// Abstandsfeld immer anzeigen
	aBoxInfo.SetDist           ((sal_Bool) sal_True);
		// Minimalgroesse in Tabellen und Absaetzen setzen
	aBoxInfo.SetMinDist( !bTableSel || rSh.IsTableMode() ||
							rSh.GetSelectionType() &
							(nsSelectionType::SEL_TXT | nsSelectionType::SEL_TBL));
		// Default-Abstand immer setzen
	aBoxInfo.SetDefDist        (MIN_BORDER_DIST);
		// Einzelne Linien koennen nur in Tabellen DontCare-Status haben
	aBoxInfo.SetValid( VALID_DISABLE, !bTableSel || !rSh.IsTableMode() );

	rSet.Put(aBoxInfo);
	rSh.GetTabBorders( rSet );

    //row split
    SwFmtRowSplit* pSplit = 0;
    rSh.GetRowSplit(pSplit);
    if(pSplit)
    {
        rSet.Put(*pSplit);
        delete pSplit;
    }

    if(!bTableSel)
	{
		rSh.ClearMark();
		rSh.Pop(sal_False);
		rSh.EndAllAction();
	}

	SwTabCols aTabCols;
	rSh.GetTabCols( aTabCols );
	SvxColumnItem aColItem;


	// Pointer wird nach der Dialogausfuehrung geloescht
	SwTableRep* pRep = new SwTableRep( aTabCols, rSh.IsTblComplex());
	pRep->SetSpace(aCols.GetRightMax());

	sal_uInt16 nPercent = 0;
	long nWidth = ::GetTableWidth(pFmt, aCols, &nPercent, &rSh );
	// Die Tabellenbreite ist fuer relative Angaben nicht korrekt
	if(nPercent)
		nWidth = pRep->GetSpace() * nPercent / 100;
	sal_uInt16 nAlign = pFmt->GetHoriOrient().GetHoriOrient();
	pRep->SetAlign(nAlign);
	SvxLRSpaceItem aLRSpace( pFmt->GetLRSpace() );
	SwTwips nLeft = aLRSpace.GetLeft();
	SwTwips nRight = aLRSpace.GetRight();
	SwTwips nDiff = pRep->GetSpace() - nRight - nLeft - nWidth;
    if(nAlign != text::HoriOrientation::FULL && Abs(nDiff) > 2)
	{
		SwTwips nLR = pRep->GetSpace() - nWidth;
		switch ( nAlign )
		{
            case text::HoriOrientation::CENTER: nLeft = nRight = nLR / 2;
			break;
            case text::HoriOrientation::LEFT: nRight = nLR; nLeft = 0;
			break;
            case text::HoriOrientation::RIGHT: nLeft = nLR, nRight = 0;
			break;
            case text::HoriOrientation::LEFT_AND_WIDTH:
				nRight = nLR - nLeft;
			break;
            case text::HoriOrientation::NONE:
				if(!nPercent)
					nWidth = pRep->GetSpace() - nLeft - nRight;
			break;
		}
	}
	pRep->SetLeftSpace(nLeft);
	pRep->SetRightSpace(nRight);

	pRep->SetWidth(nWidth);
	pRep->SetWidthPercent(nPercent);
	// sind einzelne Zeilen/Zellen selektiert, wird die Spaltenbearbeitung veraendert
	pRep->SetLineSelected(bTableSel && ! rSh.HasWholeTabSelection());
	rSet.Put(SwPtrItem(FN_TABLE_REP, pRep));
	return pRep;
}

/************************************************************************/


void ItemSetToTableParam( const SfxItemSet& rSet,
								SwWrtShell &rSh )
{
	rSh.StartAllAction();
	rSh.StartUndo( UNDO_TABLE_ATTR );
	const SfxPoolItem* pItem = 0;

	SwViewOption aUsrPref( *rSh.GetViewOptions() );
	sal_uInt16 nBackgroundDestination = aUsrPref.GetTblDest();
	if(SFX_ITEM_SET == rSet.GetItemState(SID_BACKGRND_DESTINATION, sal_False, &pItem))
	{
		nBackgroundDestination = ((SfxUInt16Item*)pItem)->GetValue();
		aUsrPref.SetTblDest((sal_uInt8)nBackgroundDestination);
		SW_MOD()->ApplyUsrPref(aUsrPref, &rSh.GetView());
	}
	sal_Bool bBorder = ( SFX_ITEM_SET == rSet.GetItemState( RES_BOX ) ||
			SFX_ITEM_SET == rSet.GetItemState( SID_ATTR_BORDER_INNER ) );
	pItem = 0;
	sal_Bool bBackground = SFX_ITEM_SET == rSet.GetItemState( RES_BACKGROUND, sal_False, &pItem );
	const SfxPoolItem* pRowItem = 0, *pTableItem = 0;
	bBackground |= SFX_ITEM_SET == rSet.GetItemState( SID_ATTR_BRUSH_ROW, sal_False, &pRowItem );
	bBackground |= SFX_ITEM_SET == rSet.GetItemState( SID_ATTR_BRUSH_TABLE, sal_False, &pTableItem );
    const SfxPoolItem* pSplit = 0;
    sal_Bool bRowSplit = SFX_ITEM_SET == rSet.GetItemState( RES_ROW_SPLIT, sal_False, &pSplit );
    const SfxPoolItem* pBoxDirection = 0;
    sal_Bool bBoxDirection = SFX_ITEM_SET == rSet.GetItemState( FN_TABLE_BOX_TEXTDIRECTION, sal_False, &pBoxDirection );
    if( bBackground || bBorder || bRowSplit || bBoxDirection)
	{
		/*
		 Die Umrandung wird auf die vorliegende Selektion angewendet
		 Liegt keine Selektion vor, wird die Tabelle vollstaendig selektiert.
		 Der Hintergrund wird immer auf den aktuellen Zustand angewendet.
		 */

		sal_Bool bTableSel = rSh.IsTableMode();
		rSh.StartAllAction();

		if(bBackground)
		{
			if(pItem)
				rSh.SetBoxBackground( *(const SvxBrushItem*)pItem );
			if(pRowItem)
			{
				SvxBrushItem aBrush(*(const SvxBrushItem*)pRowItem);
				aBrush.SetWhich(RES_BACKGROUND);
				rSh.SetRowBackground(aBrush);
			}
			if(pTableItem)
			{
				SvxBrushItem aBrush(*(const SvxBrushItem*)pTableItem);
				aBrush.SetWhich(RES_BACKGROUND);
				rSh.SetTabBackground( aBrush );
			}
		}

        if(bBoxDirection)
        {
            SvxFrameDirectionItem aDirection( FRMDIR_ENVIRONMENT, RES_FRAMEDIR );
            aDirection.SetValue(static_cast< const SvxFrameDirectionItem* >(pBoxDirection)->GetValue());
            rSh.SetBoxDirection(aDirection);
        }

        if(bBorder || bRowSplit)
		{
			rSh.Push();
			if(!bTableSel)
			{
				rSh.GetView().GetViewFrame()->GetDispatcher()->Execute( FN_TABLE_SELECT_ALL );
			}
			if(bBorder)
                rSh.SetTabBorders( rSet );

            if(bRowSplit)
            {
                rSh.SetRowSplit(*static_cast<const SwFmtRowSplit*>(pSplit));
            }

            if(!bTableSel)
			{
				rSh.ClearMark();
			}
			rSh.Pop(sal_False);
		}

		rSh.EndAllAction();
	}

	SwTabCols aTabCols;
	sal_Bool bTabCols = sal_False;
	sal_Bool bSingleLine = sal_False;
	SwTableRep* pRep = 0;
	SwFrmFmt *pFmt = rSh.GetTableFmt();
	SfxItemSet aSet( rSh.GetAttrPool(), RES_FRMATR_BEGIN, RES_FRMATR_END-1 );
	if(SFX_ITEM_SET == rSet.GetItemState( FN_TABLE_REP, sal_False, &pItem ))
	{
		pRep = (SwTableRep*)((const SwPtrItem*)pItem)->GetValue();

		const SwTwips nWidth = pRep->GetWidth();
        if ( text::HoriOrientation::FULL == pRep->GetAlign() )
		{
			SwFmtHoriOrient aAttr( pFmt->GetHoriOrient() );
            aAttr.SetHoriOrient( text::HoriOrientation::FULL );
			aSet.Put( aAttr );
		}
		else
		{
			SwFmtFrmSize aSz( ATT_VAR_SIZE, nWidth );
			if(pRep->GetWidthPercent())
			{
				aSz.SetWidthPercent( (sal_uInt8)pRep->GetWidthPercent() );
			}
			aSet.Put(aSz);
		}

		SvxLRSpaceItem aLRSpace( RES_LR_SPACE );
		aLRSpace.SetLeft(pRep->GetLeftSpace());
		aLRSpace.SetRight(pRep->GetRightSpace());
		aSet.Put( aLRSpace );

        sal_Int16 eOrient = pRep->GetAlign();
		SwFmtHoriOrient aAttr( 0, eOrient );
		aSet.Put( aAttr );
	// Damit beim recording die Ausrichtung nicht durch die Abstaende ueberschrieben
	// wird, darf das Item nur bei manueller Ausrichtung aufgez. werden
        if(eOrient != text::HoriOrientation::NONE)
			((SfxItemSet&)rSet).ClearItem( SID_ATTR_LRSPACE );


		if(pRep->HasColsChanged())
		{
			bTabCols = sal_True;
		}
	}


	if( SFX_ITEM_SET == rSet.GetItemState( FN_PARAM_TABLE_HEADLINE, sal_False, &pItem))
        rSh.SetRowsToRepeat( ((SfxUInt16Item*)pItem)->GetValue() );

	if( SFX_ITEM_SET == rSet.GetItemState( FN_TABLE_SET_VERT_ALIGN, sal_False, &pItem))
		rSh.SetBoxAlign(((SfxUInt16Item*)(pItem))->GetValue());

	if( SFX_ITEM_SET == rSet.GetItemState( FN_PARAM_TABLE_NAME, sal_False, &pItem ))
		rSh.SetTableName( *pFmt, ((const SfxStringItem*)pItem)->GetValue() );

    // kopiere die ausgesuchten Attribute in den ItemSet
	static sal_uInt16 __READONLY_DATA aIds[] =
		{
            RES_PAGEDESC,
            RES_BREAK,
            RES_KEEP,
            RES_LAYOUT_SPLIT,
            RES_UL_SPACE,
            RES_SHADOW,
            RES_FRAMEDIR,
            // --> collapsing borders FME 2005-05-27 #i29550#
            RES_COLLAPSING_BORDERS,
            // <-- collapsing borders
            0
		};
    for( const sal_uInt16* pIds = aIds; *pIds; ++pIds )
		if( SFX_ITEM_SET == rSet.GetItemState( *pIds, sal_False, &pItem))
			aSet.Put( *pItem );

	if( aSet.Count() )
		rSh.SetTblAttr( aSet );

    if(bTabCols)
	{
		rSh.GetTabCols( aTabCols );
		bSingleLine = pRep->FillTabCols( aTabCols );
		rSh.SetTabCols( aTabCols, bSingleLine );
	}

	rSh.EndUndo( UNDO_TABLE_ATTR );
	rSh.EndAllAction();
}

/************************************************************************/


static void lcl_TabGetMaxLineWidth(const SvxBorderLine* pBorderLine, SvxBorderLine& rBorderLine)
{
	if(pBorderLine->GetInWidth() > rBorderLine.GetInWidth())
		rBorderLine.SetInWidth(pBorderLine->GetInWidth());

	if(pBorderLine->GetOutWidth() > rBorderLine.GetOutWidth())
		rBorderLine.SetOutWidth(pBorderLine->GetOutWidth());

	if(pBorderLine->GetDistance() > rBorderLine.GetDistance())
		rBorderLine.SetDistance(pBorderLine->GetDistance());

	rBorderLine.SetColor(pBorderLine->GetColor());
}


void SwTableShell::Execute(SfxRequest &rReq)
{
    sal_Bool bUseDialog = sal_True;
	const SfxItemSet* pArgs = rReq.GetArgs();
	SwWrtShell &rSh = GetShell();

	//Erstmal die Slots, die keinen FrmMgr benoetigen.
	sal_Bool bMore = sal_False;
	const SfxPoolItem* pItem = 0;
	sal_uInt16 nSlot = rReq.GetSlot();
	if(pArgs)
		pArgs->GetItemState(GetPool().GetWhich(nSlot), sal_False, &pItem);
    sal_Bool bCallDone = sal_False;
    switch ( nSlot )
	{
		case SID_ATTR_BORDER:
		{
/*			sal_Bool bPopCrsr = sal_False;
			if ( !rReq.IsAPI() )
			{
				//Keine Tabellenselektion -> Aenderung wird auf die gesamte
				//Tabelle.
				if ( !rSh.IsTableMode() )
				{
					rSh.StartAction();
					bPopCrsr = sal_True;
					rSh.Push();
					rSh.EnterStdMode();
					rSh.MoveTable( fnTableCurr, fnTableStart );
					rSh.SttSelect();
					rSh.MoveTable( fnTableCurr, fnTableEnd );
					rSh.EndSelect();
				}
			}*/
			if(!pArgs)
				break;
			//Items erzeugen, weil wir sowieso nacharbeiten muessen
            SvxBoxItem     aBox( RES_BOX );
			SfxItemSet aCoreSet( GetPool(),
							RES_BOX, RES_BOX,
                            SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER,
                            0);
            SvxBoxInfoItem aCoreInfo( SID_ATTR_BORDER_INNER );
			aCoreSet.Put(aCoreInfo);
			rSh.GetTabBorders( aCoreSet );
			const SvxBoxItem& rCoreBox = (const SvxBoxItem&)
													aCoreSet.Get(RES_BOX);
            const SfxPoolItem *pBoxItem = 0;
            if ( pArgs->GetItemState(RES_BOX, sal_True, &pBoxItem) == SFX_ITEM_SET )
			{
                aBox = *(SvxBoxItem*)pBoxItem;
				if ( !rReq.IsAPI() )
					aBox.SetDistance( Max(rCoreBox.GetDistance(),sal_uInt16(55)) );
				else if ( aBox.GetDistance() < MIN_BORDER_DIST )
					aBox.SetDistance( Max(rCoreBox.GetDistance(),(sal_uInt16)MIN_BORDER_DIST)  );
			}
			else
				{ASSERT( !this, "Wo ist das Box-Item?" )}

            //since the drawing layer also supports borders the which id might be a different one
            SvxBoxInfoItem aInfo( SID_ATTR_BORDER_INNER );
            if (pArgs->GetItemState(SID_ATTR_BORDER_INNER, sal_True, &pBoxItem) == SFX_ITEM_SET)
                aInfo = *(SvxBoxInfoItem*)pBoxItem;
            else if( pArgs->GetItemState(SDRATTR_TABLE_BORDER_INNER, sal_True, &pBoxItem) == SFX_ITEM_SET )
            {
                aInfo = *(SvxBoxInfoItem*)pBoxItem;
                aInfo.SetWhich(SID_ATTR_BORDER_INNER);
            }

			aInfo.SetTable( sal_True );
			aInfo.SetValid( VALID_DISABLE, sal_False );


// Die Attribute aller Linien werden gelesen und das staerkste gewinnt
			const SvxBorderLine* pBorderLine;
			SvxBorderLine aBorderLine;
			if ((pBorderLine = rCoreBox.GetTop()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);
			if ((pBorderLine = rCoreBox.GetBottom()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);
			if ((pBorderLine = rCoreBox.GetLeft()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);
			if ((pBorderLine = rCoreBox.GetRight()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);
			if ((pBorderLine = aCoreInfo.GetHori()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);
			if ((pBorderLine = aCoreInfo.GetVert()) != NULL)
				lcl_TabGetMaxLineWidth(pBorderLine, aBorderLine);

			if(aBorderLine.GetOutWidth() == 0)
			{
				aBorderLine.SetInWidth(0);
				aBorderLine.SetOutWidth(DEF_LINE_WIDTH_0);
			}

			sal_Bool bLine = sal_False;
			if ( (pBorderLine = aBox.GetTop()) != NULL)
				aBox.SetLine(&aBorderLine, BOX_LINE_TOP), bLine |= sal_True;
			if ((pBorderLine = aBox.GetBottom()) != NULL)
				aBox.SetLine(&aBorderLine, BOX_LINE_BOTTOM), bLine |= sal_True;
			if ((pBorderLine = aBox.GetLeft()) != NULL)
				aBox.SetLine(&aBorderLine, BOX_LINE_LEFT), bLine |= sal_True;
			if ((pBorderLine = aBox.GetRight()) != NULL)
				aBox.SetLine(&aBorderLine, BOX_LINE_RIGHT), bLine |= sal_True;
			if ((pBorderLine = aInfo.GetHori()) != NULL)
				aInfo.SetLine(&aBorderLine, BOXINFO_LINE_HORI), bLine |= sal_True;
			if ((pBorderLine = aInfo.GetVert()) != NULL)
				aInfo.SetLine(&aBorderLine, BOXINFO_LINE_VERT), bLine |= sal_True;

//			if ( bPopCrsr && !bLine )
//				aBox.SetDistance( 0 );

			aCoreSet.Put( aBox  );
			aCoreSet.Put( aInfo );
			rSh.SetTabBorders( aCoreSet );

            // we must record the "real" values because otherwise the lines can't be reconstructed on playtime
            // the coding style of the controller (setting lines with width 0) is not transportable via Query/PutValue in
            // the SvxBoxItem
            rReq.AppendItem( aBox );
            rReq.AppendItem( aInfo );
            bCallDone = sal_True;

/*			if ( bPopCrsr )
			{
				rSh.KillPams();
				rSh.Pop(sal_False);
				rSh.EndAction();
			}*/
		}
		break;
		case FN_INSERT_TABLE:
			InsertTable( rReq );
		break;
		case FN_FORMAT_TABLE_DLG:
		{
            //#127012# get the bindings before the dialog is called
            // it might happen that this shell is removed after closing the dialog
            SfxBindings& rBindings = GetView().GetViewFrame()->GetBindings();
            SfxItemSet aCoreSet( GetPool(), aUITableAttrRange);

            FieldUnit eMetric = ::GetDfltMetric(0 != PTR_CAST(SwWebView, &rSh.GetView()));
            SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric)));
            SwTableRep* pTblRep = ::lcl_TableParamToItemSet( aCoreSet, rSh );
			SfxAbstractTabDialog * pDlg = NULL;
            if ( bUseDialog )
			{
                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

                pDlg = pFact->CreateSwTableTabDlg( GetView().GetWindow(), GetPool(), &aCoreSet, &rSh, DLG_FORMAT_TABLE );
                DBG_ASSERT(pDlg, "Dialogdiet fail!");
			}
			aCoreSet.Put(SfxUInt16Item(SID_HTML_MODE, ::GetHtmlMode(GetView().GetDocShell())));
			rSh.GetTblAttr(aCoreSet);
			// GetTblAttr buegelt den Background ueber!
			SvxBrushItem aBrush( RES_BACKGROUND );
            if(rSh.GetBoxBackground(aBrush))
                aCoreSet.Put( aBrush );
            else
                aCoreSet.InvalidateItem( RES_BACKGROUND );

            if ( (!pDlg && rReq.GetArgs()) || pDlg->Execute() == RET_OK )
			{
                const SfxItemSet* pOutSet = pDlg ? pDlg->GetOutputItemSet() : rReq.GetArgs();
                if ( pDlg )
                {
                    //to record FN_INSERT_TABLE correctly
                    rReq.SetSlot(FN_FORMAT_TABLE_DLG);
                    rReq.Done( *pOutSet );
                }
                ItemSetToTableParam( *pOutSet, rSh );
			}

			delete pDlg;
			delete pTblRep;
            rBindings.Update(SID_RULER_BORDERS);
			rBindings.Update(SID_ATTR_TABSTOP);
            rBindings.Update(SID_RULER_BORDERS_VERTICAL);
            rBindings.Update(SID_ATTR_TABSTOP_VERTICAL);
        }
		break;
        case SID_ATTR_BRUSH:
        case SID_ATTR_BRUSH_ROW :
        case SID_ATTR_BRUSH_TABLE :
            if(rReq.GetArgs())
                ItemSetToTableParam(*rReq.GetArgs(), rSh);
        break;
		case FN_NUM_FORMAT_TABLE_DLG:
		{
			SwView* pView = GetActiveView();
			if(pView)
			{
				FieldUnit eMetric = ::GetDfltMetric(0 != PTR_CAST(SwWebView, pView));
                SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric)));
				SvNumberFormatter* pFormatter = rSh.GetNumberFormatter();
				SfxItemSet aCoreSet( GetPool(),
								 SID_ATTR_NUMBERFORMAT_VALUE, SID_ATTR_NUMBERFORMAT_VALUE,
								 SID_ATTR_NUMBERFORMAT_INFO, SID_ATTR_NUMBERFORMAT_INFO,
								 0 );

				SfxItemSet aBoxSet( *aCoreSet.GetPool(),
									RES_BOXATR_FORMAT, RES_BOXATR_FORMAT,
									RES_BOXATR_VALUE, RES_BOXATR_VALUE,
									0 );
				rSh.GetTblBoxFormulaAttrs( aBoxSet );

				SfxItemState eState = aBoxSet.GetItemState(RES_BOXATR_FORMAT);
				if(eState == SFX_ITEM_DEFAULT)
				{
					aCoreSet.Put( SfxUInt32Item( SID_ATTR_NUMBERFORMAT_VALUE,
					pFormatter->GetFormatIndex(NF_TEXT, LANGUAGE_SYSTEM)));
				}
				else
					aCoreSet.Put( SfxUInt32Item( SID_ATTR_NUMBERFORMAT_VALUE,
									((SwTblBoxNumFormat&)aBoxSet.Get(
									RES_BOXATR_FORMAT )).GetValue() ));

				String sCurText( rSh.GetTableBoxText() );
				aCoreSet.Put( SvxNumberInfoItem( pFormatter,
									((SwTblBoxValue&)aBoxSet.Get(
										RES_BOXATR_VALUE)).GetValue(),
									sCurText, SID_ATTR_NUMBERFORMAT_INFO ));

                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

                SfxAbstractDialog* pDlg = pFact->CreateSfxDialog( GetView().GetWindow(),aCoreSet,
					pView->GetViewFrame()->GetFrame().GetFrameInterface(),
					RC_DLG_SWNUMFMTDLG );
                DBG_ASSERT(pDlg, "Dialogdiet fail!");

				if (RET_OK == pDlg->Execute())
				{
                    const SfxPoolItem* pNumberFormatItem = GetView().GetDocShell()->
									GetItem( SID_ATTR_NUMBERFORMAT_INFO );

                    if( pNumberFormatItem && 0 != ((SvxNumberInfoItem*)pNumberFormatItem)->GetDelCount() )
					{
						const sal_uInt32* pDelArr = ((SvxNumberInfoItem*)
                                                        pNumberFormatItem)->GetDelArray();

                        for ( sal_uInt16 i = 0; i < ((SvxNumberInfoItem*)pNumberFormatItem)->GetDelCount(); i++ )
                            ((SvxNumberInfoItem*)pNumberFormatItem)->
							GetNumberFormatter()->DeleteEntry( pDelArr[i] );
					}

					if( SFX_ITEM_SET == pDlg->GetOutputItemSet()->GetItemState(
                        SID_ATTR_NUMBERFORMAT_VALUE, sal_False, &pNumberFormatItem ))
					{
                        SfxItemSet aBoxFormatSet( *aCoreSet.GetPool(),
									RES_BOXATR_FORMAT, RES_BOXATR_FORMAT );
                        aBoxFormatSet.Put( SwTblBoxNumFormat(
                                ((SfxUInt32Item*)pNumberFormatItem)->GetValue() ));
                        rSh.SetTblBoxFormulaAttrs( aBoxFormatSet );

					}
				}
				delete pDlg;
			}
		}
		break;
		case FN_CALC_TABLE:
			rSh.UpdateTable();
            bCallDone = sal_True;
        break;
		case FN_TABLE_OPTIMAL_HEIGHT:
		{
			const SwFmtFrmSize aSz;
			rSh.SetRowHeight( aSz );
            bCallDone = sal_True;
        }
		break;
		case FN_TABLE_DELETE_COL:
			if ( rSh.DeleteCol() && rSh.HasSelection() )
				rSh.EnterStdMode();
            bCallDone = sal_True;
        break;
		case FN_END_TABLE:
			rSh.MoveTable( fnTableCurr, fnTableEnd );
            bCallDone = sal_True;
        break;
		case FN_START_TABLE:
			rSh.MoveTable( fnTableCurr, fnTableStart );
            bCallDone = sal_True;
        break;
        case FN_GOTO_NEXT_CELL:
        {
            sal_Bool bAppendLine = sal_True;
            if( pItem )
                bAppendLine = ((SfxBoolItem*)pItem)->GetValue();
            rReq.SetReturnValue( SfxBoolItem( nSlot,
                                    rSh.GoNextCell( bAppendLine ) ) );
            bCallDone = sal_True;
        }
        break;
        case FN_GOTO_PREV_CELL:
            rReq.SetReturnValue( SfxBoolItem( nSlot, rSh.GoPrevCell() ) );
            bCallDone = sal_True;
        break;
		case FN_TABLE_DELETE_ROW:
			if ( rSh.DeleteRow() && rSh.HasSelection() )
				rSh.EnterStdMode();
            bCallDone = sal_True;
        break;
		case FN_TABLE_MERGE_CELLS:
			if ( rSh.IsTableMode() )
				switch ( rSh.MergeTab() )
				{
					case TBLMERGE_OK:
                         bCallDone = sal_True;
                    //no break;
					case TBLMERGE_NOSELECTION:	break;
					case TBLMERGE_TOOCOMPLEX:
					{
						InfoBox aInfoBox( GetView().GetWindow(),
									SW_RES( MSG_ERR_TABLE_MERGE ) );
						aInfoBox.Execute();
						break;
					}
					default: ASSERT( !this, "unbekannter Returnwert MergeTab.");
				}
		break;
		case FN_TABLE_ADJUST_CELLS:
        case FN_TABLE_BALANCE_CELLS:
        {
            sal_Bool bBalance = (FN_TABLE_BALANCE_CELLS == nSlot);
            if ( rSh.IsAdjustCellWidthAllowed(bBalance) )
            {
                {
                    // remove actions to make a valid table selection
                    UnoActionRemoveContext aRemoveContext(rSh.GetDoc());
                }
                rSh.AdjustCellWidth(bBalance);
            }
            bCallDone = sal_True;
        }
		break;
		case FN_TABLE_BALANCE_ROWS:
			if ( rSh.BalanceRowHeight(sal_True) )
				rSh.BalanceRowHeight(sal_False);
            bCallDone = sal_True;
        break;
		case FN_TABLE_SELECT_ALL:
			rSh.EnterStdMode();
			rSh.MoveTable( fnTableCurr, fnTableStart );
			rSh.SttSelect();
			rSh.MoveTable( fnTableCurr, fnTableEnd );
			rSh.EndSelect();
            bCallDone = sal_True;
        break;
		case FN_TABLE_SELECT_COL:
			rSh.EnterStdMode();
			rSh.SelectTableCol();
            bCallDone = sal_True;
        break;
		case FN_TABLE_SELECT_ROW:
			rSh.EnterStdMode();
			rSh.SelectTableRow();
            bCallDone = sal_True;
        break;
		case FN_TABLE_SET_READ_ONLY_CELLS:
			rSh.ProtectCells();
			rSh.ResetSelect( 0, sal_False );
            bCallDone = sal_True;
        break;
		case FN_TABLE_UNSET_READ_ONLY_CELLS:
			rSh.UnProtectCells();
            bCallDone = sal_True;
        break;
		case SID_AUTOFORMAT:
		{
            SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
            DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

            AbstractSwAutoFormatDlg* pDlg = pFact->CreateSwAutoFormatDlg(&GetView().GetViewFrame()->GetWindow(), &rSh , DLG_AUTOFMT_TABLE );
            DBG_ASSERT(pDlg, "Dialogdiet fail!");
			pDlg->Execute();
			delete pDlg;
		}
		break;
		case FN_TABLE_SET_ROW_HEIGHT:
		{
            SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
            DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

            VclAbstractDialog* pDlg = pFact->CreateVclAbstractDialog( GetView().GetWindow(), rSh, DLG_ROW_HEIGHT );
            DBG_ASSERT(pDlg, "Dialogdiet fail!");
			pDlg->Execute();
			delete pDlg;
		}
		break;
		case FN_NUMBER_BULLETS:
		case FN_NUM_BULLET_ON:
			ASSERT( !this, "Funktion darf zur Zeit nicht gerufen werden." );
		break;

		case FN_TABLE_INSERT_COL:
		case FN_TABLE_INSERT_ROW:
		{
			sal_Bool bColumn = rReq.GetSlot() == FN_TABLE_INSERT_COL;
			sal_uInt16 nCount = 0;
			sal_Bool bAfter = sal_True;
			if (pItem)
			{
				nCount = ((const SfxInt16Item* )pItem)->GetValue();
				if(SFX_ITEM_SET == pArgs->GetItemState(FN_PARAM_INSERT_AFTER, sal_True, &pItem))
					bAfter = ((const SfxBoolItem* )pItem)->GetValue();
			}
			else if( !rReq.IsAPI() )
				++nCount;

			if( nCount )
			{
                // i74180: Table border patch submitted by chensuchun:
                // -->get the SvxBoxInfoItem of the table before insert
                SfxItemSet aCoreSet( GetPool(), aUITableAttrRange);
                ::lcl_TableParamToItemSet( aCoreSet, rSh );
                bool bSetInnerBorders = false;
                SwUndoId nUndoId = UNDO_EMPTY;
                // <--End

				if( bColumn )
                {
                    rSh.StartUndo( UNDO_TABLE_INSCOL );
                    rSh.InsertCol( nCount, bAfter );
                    bSetInnerBorders = true;
                    nUndoId = UNDO_TABLE_INSCOL;
                }
                else if ( !rSh.IsInRepeatedHeadline() )
                {
                    rSh.StartUndo( UNDO_TABLE_INSROW );
                    rSh.InsertRow( nCount, bAfter );
                    bSetInnerBorders = true;
                    nUndoId = UNDO_TABLE_INSROW;
                }

                // -->after inserting,reset the inner table borders
                if ( bSetInnerBorders )
                {
                    const SvxBoxInfoItem aBoxInfo((const SvxBoxInfoItem&)
                        aCoreSet.Get(SID_ATTR_BORDER_INNER));
                    SfxItemSet aSet( GetPool(), SID_ATTR_BORDER_INNER,
                                                SID_ATTR_BORDER_INNER, 0);
                    aSet.Put( aBoxInfo );
                    ItemSetToTableParam( aSet, rSh );
                    rSh.EndUndo( nUndoId );
                }
                // <--

                bCallDone = sal_True;
				break;
			}

			nSlot = bColumn ? FN_TABLE_INSERT_COL_DLG : FN_TABLE_INSERT_ROW_DLG;
		}
		// kein break;  bei Count = 0 kommt der Dialog
		case FN_TABLE_INSERT_COL_DLG:
		case FN_TABLE_INSERT_ROW_DLG:
		{
            const SfxSlot* pSlot = GetStaticInterface()->GetSlot(nSlot);
			if ( FN_TABLE_INSERT_ROW_DLG != nSlot || !rSh.IsInRepeatedHeadline())
			{
                SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
	            ::std::auto_ptr<SvxAbstractInsRowColDlg> pDlg( pFact ? pFact->CreateSvxInsRowColDlg( GetView().GetWindow(), nSlot == FN_TABLE_INSERT_COL_DLG, pSlot->GetCommand() ) : 0);

		        if( pDlg.get() && (pDlg->Execute() == 1) )
		        {
	                sal_uInt16 nDispatchSlot = (nSlot == FN_TABLE_INSERT_COL_DLG) ? FN_TABLE_INSERT_COL : FN_TABLE_INSERT_ROW;
                    SfxUInt16Item aCountItem( nDispatchSlot, static_cast< sal_uInt16 >(pDlg->getInsertCount()) );
	                SfxBoolItem  aAfter( FN_PARAM_INSERT_AFTER, !pDlg->isInsertBefore() );
           			SfxViewFrame* pVFrame = GetView().GetViewFrame();
           			if( pVFrame )
                        pVFrame->GetDispatcher()->Execute( nDispatchSlot, SFX_CALLMODE_SYNCHRON|SFX_CALLMODE_RECORD, &aCountItem, &aAfter, 0L);
		        }
			}
		}
		break;
		case FN_TABLE_SPLIT_CELLS:
		{
            long nCount=0;
            sal_Bool bHorizontal=sal_True;
            sal_Bool bProportional = sal_False;
            SFX_REQUEST_ARG( rReq, pSplit, SfxInt32Item, FN_TABLE_SPLIT_CELLS, sal_False );
            SFX_REQUEST_ARG( rReq, pHor, SfxBoolItem, FN_PARAM_1, sal_False );
            SFX_REQUEST_ARG( rReq, pProp, SfxBoolItem, FN_PARAM_2, sal_False );
            if ( pSplit )
            {
                nCount = pSplit->GetValue();
                if ( pHor )
                    bHorizontal = pHor->GetValue();
                if ( pProp )
                    bProportional = pProp->GetValue();
            }
            else
            {
				SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
				if( pFact )
				{
					const long nMaxVert = rSh.GetAnyCurRect( RECT_FRM ).Width() / MINLAY;
					SvxAbstractSplittTableDialog* pDlg = pFact->CreateSvxSplittTableDialog( GetView().GetWindow(), rSh.IsTableVertical(), nMaxVert, 99 );
					if( pDlg && (pDlg->Execute() == RET_OK) )
					{
						nCount = pDlg->GetCount();
						bHorizontal = pDlg->IsHorizontal();
						bProportional = pDlg->IsProportional();
						rReq.AppendItem( SfxInt32Item( FN_TABLE_SPLIT_CELLS, nCount ) );
						rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bHorizontal ) );
						rReq.AppendItem( SfxBoolItem( FN_PARAM_2, bProportional ) );
					}
	                delete pDlg;
				}
            }

            if ( nCount>1 )
            {
                rSh.SplitTab(!bHorizontal, static_cast< sal_uInt16 >( nCount-1 ), bProportional );
                bCallDone = sal_True;
            }
            else
                rReq.Ignore();
		}
		break;

		case FN_TABLE_SPLIT_TABLE:
		{
            SFX_REQUEST_ARG( rReq, pType, SfxUInt16Item, FN_PARAM_1, sal_False );
            if( pType )
            {
                switch( pType->GetValue() )
                {
                    case HEADLINE_NONE    :
                    case HEADLINE_BORDERCOPY:
                    case HEADLINE_CNTNTCOPY:
                    case HEADLINE_BOXATTRCOPY:
                    case HEADLINE_BOXATRCOLLCOPY:
                        rSh.SplitTable(pType->GetValue()) ;
                    default: ;//wrong parameter, do nothing
                }
            }
            else
            {
                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

                AbstractSplitTableDialog* pDlg = pFact->CreateSplitTblDialog( GetView().GetWindow(), rSh );
                DBG_ASSERT(pDlg, "Dialogdiet fail!");
                pDlg->Execute();
                rReq.AppendItem( SfxUInt16Item( FN_PARAM_1, pDlg->GetSplitMode() ) );
                delete pDlg;
                bCallDone = sal_True;
            }
		}
		break;

		case FN_TABLE_MERGE_TABLE:
		{
			sal_Bool bPrev = rSh.CanMergeTable( sal_True );
			sal_Bool bNext = rSh.CanMergeTable( sal_False );

			if( bPrev && bNext )
			{
                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");
                VclAbstractDialog* pDlg = pFact->CreateSwVclDialog( DLG_MERGE_TABLE, GetView().GetWindow(), bPrev );
                DBG_ASSERT(pDlg, "dialogdiet pDlg fail!");
				if( RET_OK != pDlg->Execute())
					bPrev = bNext = sal_False;
				delete pDlg;
			}

			if( bPrev || bNext )
				rSh.MergeTable( bPrev );
		}
		break;

		case FN_TABLE_MODE_FIX       :
		case FN_TABLE_MODE_FIX_PROP  :
		case FN_TABLE_MODE_VARIABLE	 :
		{
			rSh.SetTblChgMode( ( FN_TABLE_MODE_FIX == nSlot ? TBLFIX_CHGABS
									: FN_TABLE_MODE_FIX_PROP == nSlot
										? TBLFIX_CHGPROP
										: TBLVAR_CHGABS ) );

			SfxBindings& rBind = GetView().GetViewFrame()->GetBindings();
			static sal_uInt16 __READONLY_DATA aInva[] =
							{   FN_TABLE_MODE_FIX,
								FN_TABLE_MODE_FIX_PROP,
								FN_TABLE_MODE_VARIABLE,
								0
							};
			rBind.Invalidate( aInva );
            bCallDone = sal_True;
        }
		break;
		case FN_TABLE_AUTOSUM:
		{
			SfxViewFrame* pVFrame = GetView().GetViewFrame();
			pVFrame->GetDispatcher()->Execute(FN_EDIT_FORMULA, SFX_CALLMODE_SYNCHRON);
			const sal_uInt16 nId = SwInputChild::GetChildWindowId();
			SwInputChild* pChildWin = (SwInputChild*)pVFrame->
												GetChildWindow( nId );
			String sSum;
			GetShell().GetAutoSum(sSum);
			if( pChildWin )
				pChildWin->SetFormula( sSum );

		}
		break;
        case FN_TABLE_HEADLINE_REPEAT:
            if(0 != rSh.GetRowsToRepeat())
                rSh.SetRowsToRepeat( 0 );
            else
                rSh.SetRowsToRepeat(rSh.GetRowSelectionFromTop());
        break;
        case FN_TABLE_SELECT_CELL   :
            rSh.SelectTableCell();
        break;
        case FN_TABLE_DELETE_TABLE  :
        {
            rSh.StartAction();
            rSh.StartUndo();
            rSh.GetView().GetViewFrame()->GetDispatcher()->Execute(FN_TABLE_SELECT_ALL);
            rSh.DeleteRow();
            rSh.EndUndo();
            rSh.EndAction();
        }
        //'this' is already destroyed
        return;
        //break;
		default:
			bMore = sal_True;
	}

	if ( !bMore )
	{
        if(bCallDone)
            rReq.Done();
        return;
	}
	else
		bMore = sal_False;
	//Jetzt die Slots, die direkt auf dem TableFmt arbeiten.
	SwFrmFmt *pFmt = rSh.GetTableFmt();
	switch ( nSlot )
	{
		case SID_ATTR_ULSPACE:
		{
			if(pItem)
			{
				SvxULSpaceItem aULSpace( *(const SvxULSpaceItem*)pItem );
				aULSpace.SetWhich( RES_UL_SPACE );
				::lcl_SetAttr( rSh, aULSpace );
			}
		}
			break;

		case SID_ATTR_LRSPACE:
		{
			if(pItem)
			{
				SfxItemSet aSet( GetPool(), RES_LR_SPACE, RES_LR_SPACE,
											RES_HORI_ORIENT, RES_HORI_ORIENT, 0 );
				SvxLRSpaceItem aLRSpace( *(const SvxLRSpaceItem*)pItem );
				aLRSpace.SetWhich( RES_LR_SPACE );
				aSet.Put( aLRSpace );
				SwFmtHoriOrient aHori( pFmt->GetHoriOrient() );
                aHori.SetHoriOrient( text::HoriOrientation::NONE );
				aSet.Put( aLRSpace );
				rSh.SetTblAttr( aSet );
			}
		}
		break;
// der letzte case-Zweig der noch einen TabellenManager braucht!!
		case FN_TABLE_SET_COL_WIDTH:
		{
			SwTableFUNC aMgr( &rSh, sal_False);
			aMgr.ColWidthDlg(GetView().GetWindow());
		}
		break;
		case SID_TABLE_VERT_NONE:
		case SID_TABLE_VERT_CENTER:
		case SID_TABLE_VERT_BOTTOM:
		{
				sal_uInt16 nAlign = nSlot == SID_TABLE_VERT_NONE ?
                                text::VertOrientation::NONE :
									nSlot == SID_TABLE_VERT_CENTER ?
                                        text::VertOrientation::CENTER : text::VertOrientation::BOTTOM;
			rSh.SetBoxAlign(nAlign);
			bCallDone = sal_True;

		}
		break;

		case SID_ATTR_PARA_SPLIT:
			if ( pItem )
			{
				SwFmtLayoutSplit aSplit( ((const SvxFmtSplitItem*)pItem)->GetValue());
				SfxItemSet aSet(GetPool(),  RES_LAYOUT_SPLIT, RES_LAYOUT_SPLIT, 0 );
				aSet.Put(aSplit);
				rSh.SetTblAttr(aSet);
			}
		break;

		case SID_ATTR_PARA_KEEP:
			if ( pItem )
			{
				SvxFmtKeepItem aKeep( *(const SvxFmtKeepItem*)pItem );
				aKeep.SetWhich( RES_KEEP );
				SfxItemSet aSet(GetPool(),  RES_KEEP, RES_KEEP, 0 );
				aSet.Put(aKeep);
				rSh.SetTblAttr(aSet);
			}
		break;
        case FN_TABLE_ROW_SPLIT :
        {
            const SfxBoolItem* pBool = static_cast<const SfxBoolItem*>(pItem);
            SwFmtRowSplit* pSplit = 0;
            if(!pBool)
            {
                rSh.GetRowSplit(pSplit);
                if(pSplit)
                    pSplit->SetValue(!pSplit->GetValue());
                else
                   pSplit = new SwFmtRowSplit(sal_True);
            }
            else
            {
                pSplit = new SwFmtRowSplit(pBool->GetValue());
            }
            rSh.SetRowSplit( *pSplit );
            delete pSplit;
        }
        break;

		default:
			ASSERT( !this, "falscher Dispatcher" );
			return;
	}
    if(bCallDone)
        rReq.Done();
}
/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

void SwTableShell::GetState(SfxItemSet &rSet)
{
	SfxWhichIter aIter( rSet );
	SwWrtShell &rSh = GetShell();
	SwFrmFmt *pFmt = rSh.GetTableFmt();
    // os #124829# crash report: in case of an invalid shell selection return immediately
    if(!pFmt)
        return;
	sal_uInt16 nSlot = aIter.FirstWhich();
	while ( nSlot )
	{
		switch ( nSlot )
		{
			case FN_TABLE_MERGE_CELLS:
				if ( !rSh.IsTableMode() )
					rSet.DisableItem(FN_TABLE_MERGE_CELLS);
			break;
			case FN_TABLE_ADJUST_CELLS:
				if ( !rSh.IsAdjustCellWidthAllowed() )
					rSet.DisableItem(FN_TABLE_ADJUST_CELLS);
			break;

			case FN_TABLE_BALANCE_CELLS:
				if ( !rSh.IsAdjustCellWidthAllowed(sal_True) )
					rSet.DisableItem(FN_TABLE_BALANCE_CELLS);
			break;

			case FN_TABLE_BALANCE_ROWS:
				if ( !rSh.BalanceRowHeight(sal_True) )
					rSet.DisableItem(FN_TABLE_BALANCE_ROWS);
			break;
            case FN_OPTIMIZE_TABLE:
                if ( !rSh.IsTableMode() &&
                        !rSh.IsAdjustCellWidthAllowed() &&
                        !rSh.IsAdjustCellWidthAllowed(sal_True) &&
                        !rSh.BalanceRowHeight(sal_True) )
                    rSet.DisableItem(FN_OPTIMIZE_TABLE);
            break;
			case SID_INSERT_DIAGRAM:
				{
					SvtModuleOptions aMOpt;
					if ( !aMOpt.IsMath() || rSh.IsTblComplexForChart() )
						rSet.DisableItem(nSlot);
				}
				break;

            case FN_INSERT_TABLE:
                if ( rSh.CrsrInsideInputFld() )
                {
                    rSet.DisableItem( nSlot );
                }
                break;

			case FN_TABLE_OPTIMAL_HEIGHT:
			{
				//Disablen wenn bereits auto-Hoehe eingestellt ist.
				SwFmtFrmSize *pSz;
				rSh.GetRowHeight( pSz );
				if ( pSz )
				{
                    if ( ATT_VAR_SIZE == pSz->GetHeightSizeType() )
						rSet.DisableItem( nSlot );
					delete pSz;
				}
			}
			break;
			case FN_TABLE_INSERT_ROW:
			case FN_TABLE_INSERT_ROW_DLG:
			{
				if ( rSh.IsInRepeatedHeadline() )
					rSet.DisableItem( nSlot );
			}
			break;
			case RES_LR_SPACE:
				rSet.Put(pFmt->GetLRSpace());
			break;
			case RES_UL_SPACE:
                rSet.Put(pFmt->GetULSpace());
			break;

            case SID_TABLE_VERT_NONE:
            case SID_TABLE_VERT_CENTER:
            case SID_TABLE_VERT_BOTTOM:
            {
                sal_uInt16 nAlign = rSh.GetBoxAlign();
                sal_Bool bSet = nSlot == SID_TABLE_VERT_NONE && nAlign == text::VertOrientation::NONE||
                            nSlot == SID_TABLE_VERT_CENTER && nAlign == text::VertOrientation::CENTER ||
                            nSlot == SID_TABLE_VERT_BOTTOM && nAlign == text::VertOrientation::BOTTOM;
                rSet.Put(SfxBoolItem(nSlot, bSet));
            }
            break;

			case FN_TABLE_MODE_FIX       :
			case FN_TABLE_MODE_FIX_PROP  :
			case FN_TABLE_MODE_VARIABLE	 :
				{
                    TblChgMode nMode = rSh.GetTblChgMode();
					sal_Bool bSet = (nSlot == FN_TABLE_MODE_FIX && nMode == TBLFIX_CHGABS) ||
							(nSlot == FN_TABLE_MODE_FIX_PROP && nMode == TBLFIX_CHGPROP) ||
							(nSlot == FN_TABLE_MODE_VARIABLE && nMode == TBLVAR_CHGABS);
					rSet.Put(SfxBoolItem(nSlot, bSet));
				}
			break;

			case SID_ATTR_PARA_SPLIT:
				rSet.Put( pFmt->GetKeep() );
			break;

			case SID_ATTR_PARA_KEEP:
				rSet.Put( pFmt->GetLayoutSplit() );
			break;
			case FN_TABLE_SPLIT_TABLE:
			{
				if ( rSh.IsInHeadline() )
					rSet.DisableItem( nSlot );
			}
			break;
			case FN_TABLE_MERGE_TABLE:
			{
				sal_Bool bAsk;
				if( !rSh.CanMergeTable( sal_True, &bAsk ))
					rSet.DisableItem( nSlot );
			}
			break;

            case FN_TABLE_DELETE_ROW:
                {
                    SwSelBoxes aBoxes;
                    ::GetTblSel( rSh, aBoxes, nsSwTblSearchType::TBLSEARCH_ROW );
                    if( ::HasProtectedCells( aBoxes ))
                        rSet.DisableItem( nSlot );
                }
                break;
            case FN_TABLE_DELETE_COL:
                {
                    SwSelBoxes aBoxes;
                    ::GetTblSel( rSh, aBoxes, nsSwTblSearchType::TBLSEARCH_COL );
                    if( ::HasProtectedCells( aBoxes ))
                        rSet.DisableItem( nSlot );
                }
                break;

            case FN_TABLE_UNSET_READ_ONLY_CELLS:
                // disable in readonly sections, but enable in protected cells
                if( !rSh.CanUnProtectCells() )
                    rSet.DisableItem( nSlot );
                break;
            case RES_ROW_SPLIT:
            {
                const SwFmtLayoutSplit& rTabSplit = pFmt->GetLayoutSplit();
                if ( 0 == rTabSplit.GetValue() )
                {
                    rSet.DisableItem( nSlot );
                }
                else
                {
                    SwFmtRowSplit* pSplit = 0;
                    rSh.GetRowSplit(pSplit);
                    if(pSplit)
                        rSet.Put(*pSplit);
                    else
                        rSet.InvalidateItem( nSlot );
                    delete pSplit;
                }
            }
            break;
            case FN_TABLE_HEADLINE_REPEAT:
                if(0 != rSh.GetRowsToRepeat())
                    rSet.Put(SfxBoolItem(nSlot, sal_True));
                else if(!rSh.GetRowSelectionFromTop())
                    rSet.DisableItem( nSlot );
                else
                    rSet.Put(SfxBoolItem(nSlot, sal_False));
            break;
            case FN_TABLE_SELECT_CELL   :
                if(rSh.HasBoxSelection())
                    rSet.DisableItem( nSlot );
            break;
        }
    nSlot = aIter.NextWhich();
	}
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

SwTableShell::SwTableShell(SwView &_rView) :
    SwBaseShell(_rView)
{
	SetName(String::CreateFromAscii("Table"));
	SetHelpId(SW_TABSHELL);
    SfxShell::SetContextName(sfx2::sidebar::EnumContext::GetContextName(sfx2::sidebar::EnumContext::Context_Table));
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

void SwTableShell::GetFrmBorderState(SfxItemSet &rSet)
{
	SfxItemSet aCoreSet( GetPool(),
						 RES_BOX, RES_BOX,
						 SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 );
    SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER );
	aCoreSet.Put( aBoxInfo );
	GetShell().GetTabBorders( aCoreSet );
	rSet.Put( aCoreSet );
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

void SwTableShell::ExecTableStyle(SfxRequest& rReq)
{
	SwWrtShell &rSh = GetShell();
	const SfxItemSet *pArgs = rReq.GetArgs();
	if(pArgs)
		switch ( rReq.GetSlot() )
		{
			case SID_FRAME_LINESTYLE:
			case SID_FRAME_LINECOLOR:
			{
/*	Tabellenselektion ist abgeschafft
				sal_Bool bPopCrsr = sal_False;
				if ( !rReq.IsAPI() )
				{
					//Keine Tabellenselektion -> Aenderung wird auf die gesamte
					//Tabelle.
					if ( !rSh.IsTableMode() )
					{
						bPopCrsr = sal_True;
						rSh.Push();
						rSh.StartAction();
						rSh.EnterStdMode();
						rSh.MoveTable( fnTableCurr, fnTableStart );
						rSh.SttSelect();
						rSh.MoveTable( fnTableCurr, fnTableEnd );
						rSh.EndSelect();
					}
				}*/
				if ( rReq.GetSlot() == SID_FRAME_LINESTYLE )
				{
					const SvxLineItem &rLineItem = (const SvxLineItem&)pArgs->
															Get( SID_FRAME_LINESTYLE );
					const SvxBorderLine* pBorderLine = rLineItem.GetLine();
					rSh.SetTabLineStyle( 0, sal_True, pBorderLine);
				}
				else
				{
					const SvxColorItem &rNewColorItem = (const SvxColorItem&)pArgs->
															Get( SID_FRAME_LINECOLOR );
					rSh.SetTabLineStyle( &rNewColorItem.GetValue() );
				}

                rReq.Done();
/*				if ( bPopCrsr )
				{
					rSh.KillPams();
					rSh.Pop(sal_False);
					rSh.EndAction();
				}*/
				break;
			}
		}
}


void SwTableShell::GetLineStyleState(SfxItemSet &rSet)
{
	SfxItemSet aCoreSet( GetPool(),
							RES_BOX, RES_BOX,
							SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0);
    SvxBoxInfoItem aCoreInfo( SID_ATTR_BORDER_INNER );
	aCoreSet.Put(aCoreInfo);
	GetShell().GetTabBorders( aCoreSet );

	const SvxBoxItem& rBoxItem = (const SvxBoxItem&)aCoreSet.Get( RES_BOX );
	const SvxBorderLine* pLine = rBoxItem.GetTop();

	rSet.Put( SvxColorItem( pLine ? pLine->GetColor() : Color(), SID_FRAME_LINECOLOR ) );
	SvxLineItem aLine( SID_FRAME_LINESTYLE );
	aLine.SetLine(pLine);
	rSet.Put( aLine );
}

void SwTableShell::ExecNumberFormat(SfxRequest& rReq)
{
	const SfxItemSet* pArgs = rReq.GetArgs();
	SwWrtShell &rSh = GetShell();

	//Erstmal die Slots, die keinen FrmMgr benoetigen.
	const SfxPoolItem* pItem = 0;
	sal_uInt16 nSlot = rReq.GetSlot();
	if(pArgs)
		pArgs->GetItemState(GetPool().GetWhich(nSlot), sal_False, &pItem);

	//	Sprache immer von Cursorposition besorgen
	LanguageType eLang = rSh.GetCurLang();
	SvNumberFormatter* pFormatter = rSh.GetNumberFormatter();
	sal_uInt32 nNumberFormat = NUMBERFORMAT_ENTRY_NOT_FOUND;
	sal_uInt16 nFmtType = 0, nOffset = 0;

	switch ( nSlot )
	{
	case FN_NUMBER_FORMAT:
		if( pItem )
		{
			//	Index fuer String bestimmen
			String aCode( ((const SfxStringItem*)pItem)->GetValue() );
			nNumberFormat = pFormatter->GetEntryKey( aCode, eLang );
			if( NUMBERFORMAT_ENTRY_NOT_FOUND == nNumberFormat )
			{
				//	neu eintragen
				xub_StrLen nErrPos;
				short nType;
				if( !pFormatter->PutEntry( aCode, nErrPos, nType,
											nNumberFormat, eLang ))
					nNumberFormat = NUMBERFORMAT_ENTRY_NOT_FOUND;
			}
		}
		break;
	case FN_NUMBER_STANDARD:		nFmtType = NUMBERFORMAT_NUMBER; break;
	case FN_NUMBER_SCIENTIFIC:		nFmtType = NUMBERFORMAT_SCIENTIFIC; break;
	case FN_NUMBER_DATE:            nFmtType = NUMBERFORMAT_DATE; break;
	case FN_NUMBER_TIME:			nFmtType = NUMBERFORMAT_TIME; break;
	case FN_NUMBER_CURRENCY:		nFmtType = NUMBERFORMAT_CURRENCY; break;
	case FN_NUMBER_PERCENT:			nFmtType = NUMBERFORMAT_PERCENT; break;

	case FN_NUMBER_TWODEC:  		// #.##0,00
		nFmtType = NUMBERFORMAT_NUMBER;
		nOffset = NF_NUMBER_1000DEC2;
		break;

	default:
		ASSERT(sal_False, falscher Dispatcher);
		return;
	}

	if( nFmtType )
		nNumberFormat =	pFormatter->GetStandardFormat( nFmtType, eLang ) + nOffset;

	if( NUMBERFORMAT_ENTRY_NOT_FOUND != nNumberFormat )
	{
		SfxItemSet aBoxSet( GetPool(), RES_BOXATR_FORMAT, RES_BOXATR_FORMAT );
		aBoxSet.Put( SwTblBoxNumFormat( nNumberFormat ));
		rSh.SetTblBoxFormulaAttrs( aBoxSet );
	}

}