1 /************************************************************** 2 * 3 * Licensed to the Apache Software Foundation (ASF) under one 4 * or more contributor license agreements. See the NOTICE file 5 * distributed with this work for additional information 6 * regarding copyright ownership. The ASF licenses this file 7 * to you under the Apache License, Version 2.0 (the 8 * "License"); you may not use this file except in compliance 9 * with the License. You may obtain a copy of the License at 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, 14 * software distributed under the License is distributed on an 15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 * KIND, either express or implied. See the License for the 17 * specific language governing permissions and limitations 18 * under the License. 19 * 20 *************************************************************/ 21 22 23 24 // MARKER(update_precomp.py): autogen include statement, do not remove 25 #include "precompiled_sw.hxx" 26 27 28 #include <com/sun/star/uno/Sequence.hxx> 29 #include <com/sun/star/uno/Any.hxx> 30 #include <com/sun/star/uno/Any.hxx> 31 #include <com/sun/star/view/XRenderable.hpp> 32 33 #include <hintids.hxx> 34 #include <rtl/ustring.hxx> 35 #include <sfx2/app.hxx> 36 #include <sfx2/objsh.hxx> 37 #include <sfx2/prnmon.hxx> 38 #include <svl/languageoptions.hxx> 39 #include <editeng/paperinf.hxx> 40 #include <editeng/pbinitem.hxx> 41 #include <svx/svdview.hxx> 42 #include <toolkit/awt/vclxdevice.hxx> 43 #include <tools/debug.hxx> 44 #include <unotools/localedatawrapper.hxx> 45 #include <unotools/moduleoptions.hxx> 46 #include <unotools/syslocale.hxx> 47 #include <vcl/oldprintadaptor.hxx> 48 49 #include <unotxdoc.hxx> 50 #include <docsh.hxx> 51 #include <txtfld.hxx> 52 #include <fmtfld.hxx> 53 #include <fmtfsize.hxx> 54 #include <frmatr.hxx> 55 #include <rootfrm.hxx> 56 #include <pagefrm.hxx> 57 #include <cntfrm.hxx> 58 #include <doc.hxx> 59 #include <IDocumentUndoRedo.hxx> 60 #include <wdocsh.hxx> 61 #include <fesh.hxx> 62 #include <pam.hxx> 63 #include <viewimp.hxx> // Imp->SetFirstVisPageInvalid() 64 #include <layact.hxx> 65 #include <ndtxt.hxx> 66 #include <fldbas.hxx> 67 #include <docfld.hxx> // _SetGetExpFld 68 #include <docufld.hxx> // PostItFld /-Type 69 #include <shellres.hxx> 70 #include <viewopt.hxx> 71 #include <printdata.hxx> // SwPrintData 72 #include <pagedesc.hxx> 73 #include <poolfmt.hxx> // fuer RES_POOLPAGE_JAKET 74 #include <mdiexp.hxx> // Ansteuern der Statusleiste 75 #include <statstr.hrc> // -- " -- 76 #include <ptqueue.hxx> 77 #include <tabfrm.hxx> 78 #include <txtfrm.hxx> // MinPrtLine 79 #include <viscrs.hxx> // SwShellCrsr 80 #include <fmtpdsc.hxx> // SwFmtPageDesc 81 #include <globals.hrc> 82 83 84 using namespace ::com::sun::star; 85 86 //-------------------------------------------------------------------- 87 //Klasse zum Puffern von Paints 88 class SwQueuedPaint 89 { 90 public: 91 SwQueuedPaint *pNext; 92 ViewShell *pSh; 93 SwRect aRect; 94 95 SwQueuedPaint( ViewShell *pNew, const SwRect &rRect ) : 96 pNext( 0 ), 97 pSh( pNew ), 98 aRect( rRect ) 99 {} 100 }; 101 102 SwQueuedPaint *SwPaintQueue::pQueue = 0; 103 104 // saves some settings from the draw view 105 class SwDrawViewSave 106 { 107 String sLayerNm; 108 SdrView* pDV; 109 sal_Bool bPrintControls; 110 public: 111 SwDrawViewSave( SdrView* pSdrView ); 112 ~SwDrawViewSave(); 113 }; 114 115 116 void SwPaintQueue::Add( ViewShell *pNew, const SwRect &rNew ) 117 { 118 SwQueuedPaint *pPt; 119 if ( 0 != (pPt = pQueue) ) 120 { 121 while ( pPt->pSh != pNew && pPt->pNext ) 122 pPt = pPt->pNext; 123 if ( pPt->pSh == pNew ) 124 { 125 pPt->aRect.Union( rNew ); 126 return; 127 } 128 } 129 SwQueuedPaint *pNQ = new SwQueuedPaint( pNew, rNew ); 130 if ( pPt ) 131 pPt->pNext = pNQ; 132 else 133 pQueue = pNQ; 134 } 135 136 137 138 void SwPaintQueue::Repaint() 139 { 140 if ( !SwRootFrm::IsInPaint() && pQueue ) 141 { 142 SwQueuedPaint *pPt = pQueue; 143 do 144 { ViewShell *pSh = pPt->pSh; 145 SET_CURR_SHELL( pSh ); 146 if ( pSh->IsPreView() ) 147 { 148 if ( pSh->GetWin() ) 149 { 150 //Fuer PreView aussenherum, weil im PaintHdl (UI) die 151 //Zeilen/Spalten bekannt sind. 152 pSh->GetWin()->Invalidate(); 153 pSh->GetWin()->Update(); 154 } 155 } 156 else 157 pSh->Paint( pPt->aRect.SVRect() ); 158 pPt = pPt->pNext; 159 } while ( pPt ); 160 161 do 162 { pPt = pQueue; 163 pQueue = pQueue->pNext; 164 delete pPt; 165 } while ( pQueue ); 166 } 167 } 168 169 170 171 void SwPaintQueue::Remove( ViewShell *pSh ) 172 { 173 SwQueuedPaint *pPt; 174 if ( 0 != (pPt = pQueue) ) 175 { 176 SwQueuedPaint *pPrev = 0; 177 while ( pPt && pPt->pSh != pSh ) 178 { 179 pPrev = pPt; 180 pPt = pPt->pNext; 181 } 182 if ( pPt ) 183 { 184 if ( pPrev ) 185 pPrev->pNext = pPt->pNext; 186 else if ( pPt == pQueue ) 187 pQueue = 0; 188 delete pPt; 189 } 190 } 191 } 192 193 /****************************************************************************** 194 * Methode : void SetSwVisArea( ViewShell *pSh, Point aPrtOffset, ... 195 * Beschreibung: 196 * Erstellt : OK 04.11.94 16:27 197 * Aenderung : 198 ******************************************************************************/ 199 200 void SetSwVisArea( ViewShell *pSh, const SwRect &rRect, sal_Bool /*bPDFExport*/ ) 201 { 202 ASSERT( !pSh->GetWin(), "Drucken mit Window?" ); 203 pSh->aVisArea = rRect; 204 pSh->Imp()->SetFirstVisPageInvalid(); 205 Point aPt( rRect.Pos() ); 206 207 // calculate an offset for the rectangle of the n-th page to 208 // move the start point of the output operation to a position 209 // such that in the output device all pages will be painted 210 // at the same position 211 aPt.X() = -aPt.X(); aPt.Y() = -aPt.Y(); 212 213 OutputDevice *pOut = pSh->GetOut(); 214 215 MapMode aMapMode( pOut->GetMapMode() ); 216 aMapMode.SetOrigin( aPt ); 217 pOut->SetMapMode( aMapMode ); 218 } 219 220 /******************************************************************************/ 221 222 void ViewShell::InitPrt( OutputDevice *pOutDev ) 223 { 224 //Fuer den Printer merken wir uns einen negativen Offset, der 225 //genau dem Offset de OutputSize entspricht. Das ist notwendig, 226 //weil unser Ursprung der linken ober Ecke der physikalischen 227 //Seite ist, die Ausgaben (SV) aber den Outputoffset als Urstprung 228 //betrachten. 229 if ( pOutDev ) 230 { 231 aPrtOffst = Point(); 232 233 aPrtOffst += pOutDev->GetMapMode().GetOrigin(); 234 MapMode aMapMode( pOutDev->GetMapMode() ); 235 aMapMode.SetMapUnit( MAP_TWIP ); 236 pOutDev->SetMapMode( aMapMode ); 237 pOutDev->SetLineColor(); 238 pOutDev->SetFillColor(); 239 } 240 else 241 aPrtOffst.X() = aPrtOffst.Y() = 0; 242 243 if ( !pWin ) 244 pOut = pOutDev; //Oder was sonst? 245 } 246 247 /****************************************************************************** 248 * Methode : void ViewShell::ChgAllPageOrientation 249 * Erstellt : MA 08. Aug. 95 250 * Aenderung : 251 ******************************************************************************/ 252 253 254 void ViewShell::ChgAllPageOrientation( sal_uInt16 eOri ) 255 { 256 ASSERT( nStartAction, "missing an Action" ); 257 SET_CURR_SHELL( this ); 258 259 sal_uInt16 nAll = GetDoc()->GetPageDescCnt(); 260 sal_Bool bNewOri = Orientation(eOri) == ORIENTATION_PORTRAIT ? sal_False : sal_True; 261 262 for( sal_uInt16 i = 0; i < nAll; ++ i ) 263 { 264 const SwPageDesc& rOld = 265 const_cast<const SwDoc *>(GetDoc())->GetPageDesc( i ); 266 267 if( rOld.GetLandscape() != bNewOri ) 268 { 269 SwPageDesc aNew( rOld ); 270 { 271 ::sw::UndoGuard const ug(GetDoc()->GetIDocumentUndoRedo()); 272 GetDoc()->CopyPageDesc(rOld, aNew); 273 } 274 aNew.SetLandscape( bNewOri ); 275 SwFrmFmt& rFmt = aNew.GetMaster(); 276 SwFmtFrmSize aSz( rFmt.GetFrmSize() ); 277 // Groesse anpassen. 278 // PORTRAIT -> Hoeher als Breit 279 // LANDSCAPE -> Breiter als Hoch 280 // Hoehe ist die VarSize, Breite ist die FixSize (per Def.) 281 if( bNewOri ? aSz.GetHeight() > aSz.GetWidth() 282 : aSz.GetHeight() < aSz.GetWidth() ) 283 { 284 SwTwips aTmp = aSz.GetHeight(); 285 aSz.SetHeight( aSz.GetWidth() ); 286 aSz.SetWidth( aTmp ); 287 rFmt.SetFmtAttr( aSz ); 288 } 289 GetDoc()->ChgPageDesc( i, aNew ); 290 } 291 } 292 } 293 294 /****************************************************************************** 295 * Methode : void ViewShell::ChgAllPageOrientation 296 * Erstellt : MA 08. Aug. 95 297 * Aenderung : 298 ******************************************************************************/ 299 300 301 void ViewShell::ChgAllPageSize( Size &rSz ) 302 { 303 ASSERT( nStartAction, "missing an Action" ); 304 SET_CURR_SHELL( this ); 305 306 SwDoc* pMyDoc = GetDoc(); 307 sal_uInt16 nAll = pMyDoc->GetPageDescCnt(); 308 309 for( sal_uInt16 i = 0; i < nAll; ++i ) 310 { 311 const SwPageDesc &rOld = const_cast<const SwDoc *>(pMyDoc)->GetPageDesc( i ); 312 SwPageDesc aNew( rOld ); 313 { 314 ::sw::UndoGuard const ug(GetDoc()->GetIDocumentUndoRedo()); 315 GetDoc()->CopyPageDesc( rOld, aNew ); 316 } 317 SwFrmFmt& rPgFmt = aNew.GetMaster(); 318 Size aSz( rSz ); 319 const sal_Bool bOri = aNew.GetLandscape(); 320 if( bOri ? aSz.Height() > aSz.Width() 321 : aSz.Height() < aSz.Width() ) 322 { 323 SwTwips aTmp = aSz.Height(); 324 aSz.Height() = aSz.Width(); 325 aSz.Width() = aTmp; 326 } 327 328 SwFmtFrmSize aFrmSz( rPgFmt.GetFrmSize() ); 329 aFrmSz.SetSize( aSz ); 330 rPgFmt.SetFmtAttr( aFrmSz ); 331 pMyDoc->ChgPageDesc( i, aNew ); 332 } 333 } 334 335 336 void ViewShell::CalcPagesForPrint( sal_uInt16 nMax ) 337 { 338 SET_CURR_SHELL( this ); 339 340 SwRootFrm* pMyLayout = GetLayout(); 341 342 const SwFrm *pPage = pMyLayout->Lower(); 343 SwLayAction aAction( pMyLayout, Imp() ); 344 345 pMyLayout->StartAllAction(); 346 for ( sal_uInt16 i = 1; pPage && i <= nMax; pPage = pPage->GetNext(), ++i ) 347 { 348 pPage->Calc(); 349 SwRect aOldVis( VisArea() ); 350 aVisArea = pPage->Frm(); 351 Imp()->SetFirstVisPageInvalid(); 352 aAction.Reset(); 353 aAction.SetPaint( sal_False ); 354 aAction.SetWaitAllowed( sal_False ); 355 aAction.SetReschedule( sal_True ); 356 357 aAction.Action(); 358 359 aVisArea = aOldVis; //Zuruecksetzen wg. der Paints! 360 Imp()->SetFirstVisPageInvalid(); 361 // SwPaintQueue::Repaint(); 362 } 363 364 pMyLayout->EndAllAction(); 365 } 366 367 /******************************************************************************/ 368 369 SwDoc * ViewShell::FillPrtDoc( SwDoc *pPrtDoc, const SfxPrinter* pPrt) 370 { 371 ASSERT( this->IsA( TYPE(SwFEShell) ),"ViewShell::Prt for FEShell only"); 372 SwFEShell* pFESh = (SwFEShell*)this; 373 // Wir bauen uns ein neues Dokument 374 // SwDoc *pPrtDoc = new SwDoc; 375 // pPrtDoc->acquire(); 376 // pPrtDoc->SetRefForDocShell( (SvEmbeddedObjectRef*)&(long&)rDocShellRef ); 377 pPrtDoc->LockExpFlds(); 378 379 // Der Drucker wird uebernommen 380 //! Make a copy of it since it gets destroyed with the temporary document 381 //! used for PDF export 382 if (pPrt) 383 pPrtDoc->setPrinter( new SfxPrinter(*pPrt), true, true ); 384 385 const SfxPoolItem* pCpyItem; 386 const SfxItemPool& rPool = GetAttrPool(); 387 for( sal_uInt16 nWh = POOLATTR_BEGIN; nWh < POOLATTR_END; ++nWh ) 388 if( 0 != ( pCpyItem = rPool.GetPoolDefaultItem( nWh ) ) ) 389 pPrtDoc->GetAttrPool().SetPoolDefaultItem( *pCpyItem ); 390 391 // JP 29.07.99 - Bug 67951 - set all Styles from the SourceDoc into 392 // the PrintDoc - will be replaced! 393 pPrtDoc->ReplaceStyles( *GetDoc() ); 394 395 SwShellCrsr *pActCrsr = pFESh->_GetCrsr(); 396 SwShellCrsr *pFirstCrsr = dynamic_cast<SwShellCrsr*>(pActCrsr->GetNext()); 397 if( !pActCrsr->HasMark() ) // bei Multiselektion kann der aktuelle Cursor leer sein 398 { 399 pActCrsr = dynamic_cast<SwShellCrsr*>(pActCrsr->GetPrev()); 400 } 401 402 // Die Y-Position der ersten Selektion 403 // Die Y-Position der ersten Selektion 404 Point aSelPoint; 405 if( pFESh->IsTableMode() ) 406 { 407 SwShellTableCrsr* pShellTblCrsr = pFESh->GetTableCrsr(); 408 409 const SwCntntNode* pCntntNode = pShellTblCrsr->GetNode()->GetCntntNode(); 410 const SwCntntFrm *pCntntFrm = pCntntNode ? pCntntNode->getLayoutFrm( GetLayout(), 0, pShellTblCrsr->Start() ) : 0; 411 if( pCntntFrm ) 412 { 413 SwRect aCharRect; 414 SwCrsrMoveState aTmpState( MV_NONE ); 415 pCntntFrm->GetCharRect( aCharRect, *pShellTblCrsr->Start(), &aTmpState ); 416 aSelPoint = Point( aCharRect.Left(), aCharRect.Top() ); 417 } 418 } 419 else 420 { 421 aSelPoint = pFirstCrsr->GetSttPos(); 422 } 423 424 const SwPageFrm* pPage = GetLayout()->GetPageAtPos( aSelPoint ); 425 ASSERT( pPage, "no page found!" ); 426 427 // get page descriptor - fall back to the first one if pPage could not be found 428 const SwPageDesc* pPageDesc = pPage ? pPrtDoc->FindPageDescByName( 429 pPage->GetPageDesc()->GetName() ) : &pPrtDoc->_GetPageDesc( (sal_uInt16)0 ); 430 431 if( !pFESh->IsTableMode() && pActCrsr->HasMark() ) 432 { // Am letzten Absatz die Absatzattribute richten: 433 SwNodeIndex aNodeIdx( *pPrtDoc->GetNodes().GetEndOfContent().StartOfSectionNode() ); 434 SwTxtNode* pTxtNd = pPrtDoc->GetNodes().GoNext( &aNodeIdx )->GetTxtNode(); 435 SwCntntNode *pLastNd = 436 pActCrsr->GetCntntNode( (*pActCrsr->GetMark()) <= (*pActCrsr->GetPoint()) ); 437 // Hier werden die Absatzattribute des ersten Absatzes uebertragen 438 if( pLastNd && pLastNd->IsTxtNode() ) 439 ((SwTxtNode*)pLastNd)->CopyCollFmt( *pTxtNd ); 440 } 441 442 // es wurde in der CORE eine neu angelegt (OLE-Objekte kopiert!) 443 //REMOVE // if( aDocShellRef.Is() ) 444 //REMOVE // SwDataExchange::InitOle( aDocShellRef, pPrtDoc ); 445 // und fuellen es mit dem selektierten Bereich 446 pFESh->Copy( pPrtDoc ); 447 448 //Jetzt noch am ersten Absatz die Seitenvorlage setzen 449 { 450 SwNodeIndex aNodeIdx( *pPrtDoc->GetNodes().GetEndOfContent().StartOfSectionNode() ); 451 SwCntntNode* pCNd = pPrtDoc->GetNodes().GoNext( &aNodeIdx ); // gehe zum 1. ContentNode 452 if( pFESh->IsTableMode() ) 453 { 454 SwTableNode* pTNd = pCNd->FindTableNode(); 455 if( pTNd ) 456 pTNd->GetTable().GetFrmFmt()->SetFmtAttr( SwFmtPageDesc( pPageDesc ) ); 457 } 458 else 459 { 460 pCNd->SetAttr( SwFmtPageDesc( pPageDesc ) ); 461 if( pFirstCrsr->HasMark() ) 462 { 463 SwTxtNode *pTxtNd = pCNd->GetTxtNode(); 464 if( pTxtNd ) 465 { 466 SwCntntNode *pFirstNd = 467 pFirstCrsr->GetCntntNode( (*pFirstCrsr->GetMark()) > (*pFirstCrsr->GetPoint()) ); 468 // Hier werden die Absatzattribute des ersten Absatzes uebertragen 469 if( pFirstNd && pFirstNd->IsTxtNode() ) 470 ((SwTxtNode*)pFirstNd)->CopyCollFmt( *pTxtNd ); 471 } 472 } 473 } 474 } 475 return pPrtDoc; 476 } 477 478 479 sal_Bool ViewShell::PrintOrPDFExport( 480 OutputDevice *pOutDev, 481 SwPrintData const& rPrintData, 482 sal_Int32 nRenderer /* the index in the vector of pages to be printed */ ) 483 { 484 //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 485 //Immer die Druckroutinen in viewpg.cxx (PrintProspect) mitpflegen!! 486 //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 487 488 const sal_Int32 nMaxRenderer = rPrintData.GetRenderData().GetPagesToPrint().size() - 1; 489 #if OSL_DEBUG_LEVEL > 1 490 DBG_ASSERT( 0 <= nRenderer && nRenderer <= nMaxRenderer, "nRenderer out of bounds"); 491 #endif 492 if (!pOutDev || nMaxRenderer < 0 || nRenderer < 0 || nRenderer > nMaxRenderer) 493 return sal_False; 494 495 // save settings of OutputDevice (should be done always since the 496 // output device is now provided by a call from outside the Writer) 497 pOutDev->Push(); 498 499 // eine neue Shell fuer den Printer erzeugen 500 ViewShell *pShell; 501 SwDoc *pOutDevDoc; 502 503 // Print/PDF export for (multi-)selection has already generated a 504 // temporary document with the selected text. 505 // (see XRenderable implementation in unotxdoc.cxx) 506 // It is implemented this way because PDF export calls this Prt function 507 // once per page and we do not like to always have the temporary document 508 // to be created that often here. 509 pOutDevDoc = GetDoc(); 510 pShell = new ViewShell( *this, 0, pOutDev ); 511 512 SdrView *pDrawView = pShell->GetDrawView(); 513 if (pDrawView) 514 { 515 pDrawView->SetBufferedOutputAllowed( false ); 516 pDrawView->SetBufferedOverlayAllowed( false ); 517 } 518 519 { //Zusaetzlicher Scope, damit die CurrShell vor dem zerstoeren der 520 //Shell zurueckgesetzt wird. 521 522 SET_CURR_SHELL( pShell ); 523 524 //JP 01.02.99: das ReadOnly Flag wird NIE mitkopiert; Bug 61335 525 if( pOpt->IsReadonly() ) 526 pShell->pOpt->SetReadonly( sal_True ); 527 528 // save options at draw view: 529 SwDrawViewSave aDrawViewSave( pShell->GetDrawView() ); 530 531 pShell->PrepareForPrint( rPrintData ); 532 533 const sal_Int32 nPage = rPrintData.GetRenderData().GetPagesToPrint()[ nRenderer ]; 534 #if OSL_DEBUG_LEVEL > 1 535 DBG_ASSERT( nPage == 0 || rPrintData.GetRenderData().GetValidPagesSet().count( nPage ) == 1, "nPage not valid" ); 536 #endif 537 const SwPageFrm *pStPage = 0; 538 if (nPage > 0) // a 'regular' page, not one from the post-it document 539 { 540 const SwRenderData::ValidStartFramesMap_t &rFrms = rPrintData.GetRenderData().GetValidStartFrames(); 541 SwRenderData::ValidStartFramesMap_t::const_iterator aIt( rFrms.find( nPage ) ); 542 DBG_ASSERT( aIt != rFrms.end(), "failed to find start frame" ); 543 if (aIt == rFrms.end()) 544 return sal_False; 545 pStPage = aIt->second; 546 } 547 else // a page from the post-its document ... 548 { 549 DBG_ASSERT( nPage == 0, "unexpected page number. 0 for post-it pages expected" ); 550 pStPage = rPrintData.GetRenderData().GetPostItStartFrames()[ nRenderer ]; 551 } 552 DBG_ASSERT( pStPage, "failed to get start page" ); 553 554 //!! applying view options and formatting the dcoument should now only be done in getRendererCount! 555 556 ViewShell *pViewSh2 = nPage == 0 ? /* post-it page? */ 557 rPrintData.GetRenderData().m_pPostItShell : pShell; 558 ::SetSwVisArea( pViewSh2, pStPage->Frm() ); 559 560 // FIXME disabled because rPrintData.aOffset is always (0,0) 561 #if 0 562 // wenn wir einen Umschlag drucken wird ein Offset beachtet 563 if( pStPage->GetFmt()->GetPoolFmtId() == RES_POOLPAGE_JAKET ) 564 { 565 Point aNewOrigin = pOutDev->GetMapMode().GetOrigin(); 566 aNewOrigin += rPrintData.aOffset; 567 MapMode aTmp( pOutDev->GetMapMode() ); 568 aTmp.SetOrigin( aNewOrigin ); 569 pOutDev->SetMapMode( aTmp ); 570 } 571 #endif 572 573 pShell->InitPrt( pOutDev ); 574 575 pViewSh2 = nPage == 0 ? /* post-it page? */ 576 rPrintData.GetRenderData().m_pPostItShell : pShell; 577 ::SetSwVisArea( pViewSh2, pStPage->Frm() ); 578 579 pStPage->GetUpper()->Paint( pStPage->Frm(), &rPrintData ); 580 581 SwPaintQueue::Repaint(); 582 } //Zus. Scope wg. CurShell! 583 584 delete pShell; 585 586 // restore settings of OutputDevice (should be done always now since the 587 // output device is now provided by a call from outside the Writer) 588 pOutDev->Pop(); 589 590 return sal_True; 591 } 592 593 /****************************************************************************** 594 * Methode : PrtOle2() 595 * Beschreibung: 596 * Erstellt : PK 07.12.94 597 * Aenderung : MA 16. Feb. 95 598 ******************************************************************************/ 599 600 601 602 void ViewShell::PrtOle2( SwDoc *pDoc, const SwViewOption *pOpt, const SwPrintData& rOptions, 603 OutputDevice* pOleOut, const Rectangle& rRect ) 604 { 605 //Wir brauchen eine Shell fuer das Drucken. Entweder hat das Doc schon 606 //eine, dann legen wir uns eine neue Sicht an, oder das Doc hat noch 607 //keine, dann erzeugen wir die erste Sicht. 608 ViewShell *pSh; 609 if( pDoc->GetCurrentViewShell() ) 610 pSh = new ViewShell( *pDoc->GetCurrentViewShell(), 0, pOleOut,VSHELLFLAG_SHARELAYOUT );//swmod 080129 611 else //swmod 071108//swmod 071225 612 pSh = new ViewShell( *pDoc, 0, pOpt, pOleOut);//swmod 080129 613 614 { 615 SET_CURR_SHELL( pSh ); 616 pSh->PrepareForPrint( rOptions ); 617 pSh->SetPrtFormatOption( sal_True ); 618 619 SwRect aSwRect( rRect ); 620 pSh->aVisArea = aSwRect; 621 622 if ( pSh->GetViewOptions()->getBrowseMode() && 623 pSh->GetNext() == pSh ) 624 { 625 pSh->CheckBrowseView( sal_False ); 626 pSh->GetLayout()->Lower()->InvalidateSize(); 627 } 628 629 // --> FME 2005-02-10 #119474# 630 // CalcPagesForPrint() should not be necessary here. The pages in the 631 // visible area will be formatted in SwRootFrm::Paint(). 632 // Removing this gives us a performance gain during saving the 633 // document because the thumbnail creation will not trigger a complete 634 // formatting of the document. 635 // Seiten fuers Drucken formatieren 636 // pSh->CalcPagesForPrint( SHRT_MAX ); 637 // <-- 638 639 //#39275# jetzt will der Meyer doch ein Clipping 640 pOleOut->Push( PUSH_CLIPREGION ); 641 pOleOut->IntersectClipRegion( aSwRect.SVRect() ); 642 pSh->GetLayout()->Paint( aSwRect ); 643 // SFX_APP()->SpoilDemoOutput( *pOleOut, rRect ); 644 pOleOut->Pop(); 645 646 // erst muss das CurrShell Object zerstoert werden!! 647 } 648 delete pSh; 649 } 650 651 /****************************************************************************** 652 * Methode : IsAnyFieldInDoc() 653 * Beschreibung: Stellt fest, ob im DocNodesArray Felder verankert sind 654 * Erstellt : JP 27.07.95 655 * Aenderung : JP 10.12.97 656 ******************************************************************************/ 657 658 659 660 sal_Bool ViewShell::IsAnyFieldInDoc() const 661 { 662 const SfxPoolItem* pItem; 663 sal_uInt32 nMaxItems = pDoc->GetAttrPool().GetItemCount2( RES_TXTATR_FIELD ); 664 for( sal_uInt32 n = 0; n < nMaxItems; ++n ) 665 if( 0 != (pItem = pDoc->GetAttrPool().GetItem2( RES_TXTATR_FIELD, n ))) 666 { 667 const SwFmtFld* pFmtFld = (SwFmtFld*)pItem; 668 const SwTxtFld* pTxtFld = pFmtFld->GetTxtFld(); 669 // do not include postits in field check 670 const SwField* pFld = pFmtFld->GetField(); 671 if( pTxtFld && pTxtFld->GetTxtNode().GetNodes().IsDocNodes() 672 && (pFld->Which() != RES_POSTITFLD)) 673 { 674 return sal_True; 675 } 676 } 677 return sal_False; 678 } 679 680 681 682 /****************************************************************************** 683 * SwDrawViewSave 684 * 685 * Saves some settings at the draw view 686 ******************************************************************************/ 687 688 SwDrawViewSave::SwDrawViewSave( SdrView* pSdrView ) 689 : pDV( pSdrView ) 690 { 691 if ( pDV ) 692 { 693 sLayerNm.AssignAscii( RTL_CONSTASCII_STRINGPARAM("Controls" ) ); 694 bPrintControls = pDV->IsLayerPrintable( sLayerNm ); 695 } 696 } 697 698 SwDrawViewSave::~SwDrawViewSave() 699 { 700 if ( pDV ) 701 { 702 pDV->SetLayerPrintable( sLayerNm, bPrintControls ); 703 } 704 } 705 706 707 // OD 09.01.2003 #i6467# - method also called for page preview 708 void ViewShell::PrepareForPrint( const SwPrintData &rOptions ) 709 { 710 // Viewoptions fuer den Drucker setzen 711 pOpt->SetGraphic ( sal_True == rOptions.bPrintGraphic ); 712 pOpt->SetTable ( sal_True == rOptions.bPrintTable ); 713 pOpt->SetDraw ( sal_True == rOptions.bPrintDraw ); 714 pOpt->SetControl ( sal_True == rOptions.bPrintControl ); 715 pOpt->SetPageBack( sal_True == rOptions.bPrintPageBackground ); 716 pOpt->SetBlackFont( sal_True == rOptions.bPrintBlackFont ); 717 718 if ( HasDrawView() ) 719 { 720 SdrView *pDrawView = GetDrawView(); 721 String sLayerNm; 722 sLayerNm.AssignAscii(RTL_CONSTASCII_STRINGPARAM("Controls" )); 723 // OD 09.01.2003 #i6467# - consider, if view shell belongs to page preview 724 if ( !IsPreView() ) 725 { 726 pDrawView->SetLayerPrintable( sLayerNm, rOptions.bPrintControl ); 727 } 728 else 729 { 730 pDrawView->SetLayerVisible( sLayerNm, rOptions.bPrintControl ); 731 } 732 } 733 } 734 735