xref: /trunk/main/officecfg/registry/schema/org/openoffice/Office/Draw.xcs (revision 4c00018e)

<?xml version="1.0" encoding="UTF-8"?>
<!--***********************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 ***********************************************************-->


<!DOCTYPE oor:component-schema SYSTEM "../../../../component-schema.dtd">
<oor:component-schema xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" oor:name="Draw" oor:package="org.openoffice.Office" xml:lang="en-US">
	<info>
		<desc>Defines the properties of the Draw application.</desc>
	</info>
	<import oor:component="org.openoffice.Office.Common"/>
	<component>
		<group oor:name="Layout">
			<info>
				<desc>Defines the general properties of the graphical object representation.</desc>
			</info>
			<group oor:name="Display">
				<info>
					<desc>Defines the general properties of the graphical object representation of screen displays.</desc>
				</info>
				<prop oor:name="Ruler" oor:type="xs:boolean">
					<!-- OldPath: Draw/Layout/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Display -->
					<info>
						<desc>Indicates whether to show the rulers at the left and at the top of the working area.</desc>
						<label>Rulers visible</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="Helpline" oor:type="xs:boolean">
					<!-- OldPath: Draw/Layout/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Display -->
					<info>
						<desc>Indicates whether to show help lines that can be created by dragging them from the rulers.</desc>
						<label>Helplines visible</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Guide" oor:type="xs:boolean">
					<!-- OldPath: Draw/Layout/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Display -->
					<info>
						<desc>Indicates whether to show help lines when moving an object.</desc>
						<label>Guides when moving</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Bezier" oor:type="xs:boolean">
					<!-- OldPath: Draw/Layout/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Display -->
					<info>
						<desc>Indicates whether to show all control points in the Bézier curve editor.</desc>
						<label>All control points in Bézier editor</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Contour" oor:type="xs:boolean">
					<!-- OldPath: Draw/Layout/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Display -->
					<info>
						<desc>Indicates whether to show the outline of all moved objects when moving more then one object at a time.</desc>
						<label>Contour of each individual object</label>
					</info>
					<value>true</value>
				</prop>
			</group>
			<group oor:name="Other">
				<info>
					<desc>Defines other properties regarding device independent graphical object representation.</desc>
				</info>
				<group oor:name="TabStop">
					<!-- OldPath: Draw/Layout -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Tab stops -->
					<!-- Notice: Default-Nonmetric Value: 1270 1/100 mm -->
					<info>
						<desc>Specifies the distance between adjacent tab stops.</desc>
						<label>Tab stops</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1250</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1270</value>
					</prop>
				</group>
				<group oor:name="MeasureUnit">
					<!-- OldPath: Draw/Layout -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Layout - [Section] Meas. units -->
					<info>
						<desc>Contains the specification of distances and sizes.</desc>
						<label>Measurement unit</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>Specifies the unit used for specification of distances and sizes in a metric environment.</desc>
						</info>
						<constraints>
							<enumeration oor:value="1">
								<info>
									<desc>Millimeter</desc>
								</info>
							</enumeration>
							<enumeration oor:value="2">
								<info>
									<desc>Centimeter</desc>
								</info>
							</enumeration>
							<enumeration oor:value="6">
								<info>
									<desc>Point</desc>
								</info>
							</enumeration>
							<enumeration oor:value="7">
								<info>
									<desc>Pica</desc>
								</info>
							</enumeration>
							<enumeration oor:value="8">
								<info>
									<desc>Inch</desc>
								</info>
							</enumeration>
						</constraints>
						<value>2</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>Specifies the unit used for specification of distances and sizes in a non metric environment.</desc>
							<label>Measurement unit</label>
						</info>
						<constraints>
							<enumeration oor:value="1">
								<info>
									<desc>Millimeter</desc>
								</info>
							</enumeration>
							<enumeration oor:value="2">
								<info>
									<desc>Centimeter</desc>
								</info>
							</enumeration>
							<enumeration oor:value="6">
								<info>
									<desc>Point</desc>
								</info>
							</enumeration>
							<enumeration oor:value="7">
								<info>
									<desc>Pica</desc>
								</info>
							</enumeration>
							<enumeration oor:value="8">
								<info>
									<desc>Inch</desc>
								</info>
							</enumeration>
						</constraints>
						<value>8</value>
					</prop>
				</group>
			</group>
		</group>
		<group oor:name="Content">
			<info>
				<desc>Contains the specification of how to display the content of Draw documents.</desc>
			</info>
			<group oor:name="Display">
				<info>
					<desc>Contains the specification of how to display the content of Draw documents on screen.</desc>
				</info>
				<prop oor:name="PicturePlaceholder" oor:type="xs:boolean">
					<!-- OldPath: Draw/Contents/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Contents - [Section] Alternative display -->
					<info>
						<desc>Indicates whether to show only outlines of graphical objects.</desc>
						<label>Picture placeholders</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="ContourMode" oor:type="xs:boolean">
					<!-- OldPath: Draw/Contents/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Contents - [Section] Alternative display -->
					<info>
						<desc>Indicates whether to show only outlines of draw objects.</desc>
						<label>Contour mode</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="TextPlaceholder" oor:type="xs:boolean">
					<!-- OldPath: Draw/Contents/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Contents - [Section] Alternative display -->
					<info>
						<desc>Indicates whether to use placeholders for text in draw objects.</desc>
						<label>Text placeholders</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="LineContour" oor:type="xs:boolean">
					<!-- OldPath: Draw/Contents/Display -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Contents - [Section] Alternative display -->
					<info>
						<desc>Indicates whether to show only hairlines instead of an object&apos;s linestyle.</desc>
						<label>Line contour only</label>
					</info>
					<value>false</value>
				</prop>
			</group>
		</group>
		<group oor:name="Misc">
			<info>
				<desc>Contains a collection of configuration items for the Draw application that do not fit into another category.</desc>
			</info>
			<prop oor:name="BackgroundCache" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Other - [Section] Other -->
				<info>
					<desc>Indicates whether to store master pages in a cache to speed up drawing.</desc>
					<label>Use background cache</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="CopyWhileMoving" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Other - [Section] Other -->
				<info>
					<desc>Indicates whether moving while holding the Control key makes a copy of the moved object.</desc>
					<label>Copy while moving</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="ObjectMoveable" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Other - [Section] Other -->
				<info>
					<desc>Indicates whether objects can still be moved while in rotating mode.</desc>
					<label>Objects always moveable</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="NoDistort" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Other - [Section] Other -->
				<info>
					<desc>Indicates whether objects that are placed on a circle keep their original form, i.e. may be moved and rotated but not resized or otherwise distorted.</desc>
					<label>Don&apos;t distort objects in curve</label>
				</info>
				<value>false</value>
			</prop>
			<prop oor:name="DclickTextedit" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: soffice.cfg -->
				<!-- UIHints: Option Bar -->
				<info>
					<desc>Indicates whether a double-click on a text object changes activates the edit mode.</desc>
					<label>Double-Click Text to Edit</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="RotateClick" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: soffice.cfg -->
				<!-- UIHints: Option Bar -->
				<info>
					<desc>Indicates whether a double-click on an object activates the rotation mode.</desc>
					<label>Rotation Mode after clicking object</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="Preview" oor:type="xs:double">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: soffice.cfg -->
				<!-- UIHints: Menu: view - preview mode -->
				<info>
					<desc>Specifies the color quality of the preview: 0 - Color, 868 - Grayscale, 5381 - Black/White.</desc>
					<label>Preview-Mode</label>
				</info>
				<constraints>
					<enumeration oor:value="0">
						<info>
							<desc>Color</desc>
						</info>
					</enumeration>
					<enumeration oor:value="868">
						<info>
							<desc>Grayscale</desc>
						</info>
					</enumeration>
					<enumeration oor:value="5381">
						<info>
							<desc>Black/White</desc>
						</info>
					</enumeration>
				</constraints>
				<value>0</value>
			</prop>
			<prop oor:name="ShowComments" oor:type="xs:boolean">
				<info>
					<desc>Indicates whether to show comments (true) or hide them (false).</desc>
					<label>Show Comments</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="BigHandles" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: soffice.cfg -->
				<!-- UIHints: Optionbar -->
				<info>
					<desc>Indicates whether to show big (true) or small (false) handles.</desc>
					<label>Big Handles</label>
				</info>
				<value>true</value>
			</prop>
			<prop oor:name="ModifyWithAttributes" oor:type="xs:boolean">
				<!-- OldPath: Draw/Other -->
				<!-- OldLocation: soffice.cfg -->
				<!-- UIHints: Optionbar -->
				<info>
					<desc>Indicates whether the object creation and modification will be visualized using the full object attribute set or wireframe.</desc>
					<label>Modify with attributes</label>
				</info>
				<value>true</value>
			</prop>
			<group oor:name="TextObject">
				<info>
					<desc>Defines text editing related configuration items.</desc>
				</info>
				<prop oor:name="QuickEditing" oor:type="xs:boolean">
					<!-- OldPath: Draw/Other/Text_Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Other - [Section] Text objects -->
					<info>
						<desc>Indicates whether a simple click on a text object changes it to edit mode.</desc>
						<label>Allow quick editing</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="Selectable" oor:type="xs:boolean">
					<!-- OldPath: Draw/Other/Text_Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Other - [Section] Text objects -->
					<info>
						<desc>Indicates whether a text frame can only be selected by clicking on the text or by clicking somewhere in the frame.</desc>
						<label>Only text area selectable</label>
					</info>
					<value>true</value>
				</prop>
			</group>
			<group oor:name="CrossFading">
				<info>
					<desc>Contains a specification of how to morph between objects (e.g. how many steps and whether to regard the object&apos;s attributes).</desc>
				</info>
				<prop oor:name="Steps" oor:type="xs:short">
					<!-- OldPath: Draw/Cross_fading -->
					<!-- OldLocation: drawing.cfg -->
					<!-- UIHints: Select two objects =&gt; Edit - Cross-fade -->
					<info>
						<desc>Specifies the number of intermediate morphing steps between two objects.</desc>
						<label>Steps</label>
					</info>
					<constraints>
						<minInclusive oor:value="1">
							<info>
								<desc>Specifies that there has to be at least one morphing step.</desc>
							</info>
						</minInclusive>
						<maxInclusive oor:value="256">
							<info>
								<desc>Specifies that there may be at least this many morphing steps.</desc>
							</info>
						</maxInclusive>
					</constraints>
					<value>16</value>
				</prop>
				<prop oor:name="Orientation" oor:type="xs:boolean">
					<!-- OldPath: Draw/Cross_fading -->
					<!-- OldLocation: drawing.cfg -->
					<!-- UIHints: Select two objects =&gt; Edit - Cross-fade -->
					<info>
						<desc>Indicates whether two objects to be morphed shall have the same orientation.</desc>
						<label>Orientation</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="Attributes" oor:type="xs:boolean">
					<!-- OldPath: Draw/Cross_fading -->
					<!-- OldLocation: drawing.cfg -->
					<!-- UIHints: Select two objects =&gt; Edit - Cross-fade -->
					<info>
						<desc>Indicates whether to consider objects&apos; attributes (e.g. colors) when morphing one object into another.</desc>
						<label>Attributes</label>
					</info>
					<value>true</value>
				</prop>
			</group>
			<group oor:name="DefaultObjectSize">
				<!-- OldPath: -->
				<!-- OldLocation: -->
				<!-- UIHints: Default size for newly created objects when using CTRL-Return or CTRL-Click -->
				<info>
					<desc>Defines the default size of newly created objects using CTRL-Return or CTRL-Click at a object creating Button.</desc>
					<label>Default Object Size</label>
				</info>
				<prop oor:name="Width" oor:type="xs:int">
					<info>
						<desc>Specifies the default width of new objects. [UNIT=1/100 mm]</desc>
						<label/>
					</info>
					<value>8000</value>
				</prop>
				<prop oor:name="Height" oor:type="xs:int">
					<info>
						<desc>Specifies the default height of new objects. [UNIT=1/100 mm]</desc>
						<label/>
					</info>
					<value>5000</value>
				</prop>
			</group>
			<group oor:name="Compatibility">
				<info>
					<desc>Contains the group of options that control the compatibility to other applications.</desc>
					<label>Compatibility options.</label>
				</info>
				<prop oor:name="PrinterIndependentLayout" oor:type="xs:short">
					<!-- UIHints: Tools - Options - Draw - Other - [Section] Compatibility -->
					<info>
						<desc>Indicates whether to use printer independent metrics for document formatting (2) or to use metrics derived from the current printer (1). Refer to com::sun::star::document::PrinterIndependentLayout for valid values.</desc>
						<label>Use printer independent metrics for document formatting</label>
					</info>
					<value>2</value>
				</prop>
			</group>
		</group>
		<group oor:name="Snap">
			<info>
				<desc>Contains the specification of how to force object positions and sizes to the snap grid or to align with other objects.</desc>
			</info>
			<group oor:name="Object">
				<info>
					<desc>Contains the specification of how to force object positions and sizes to predefined locations in relation to other objects.</desc>
				</info>
				<prop oor:name="Grid" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Indicates whether to snap an object when moved to the next grid point.</desc>
						<label>Grid lines</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="SnapLine" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Indicates whether to snap at snap lines.</desc>
						<label>Snap lines</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="PageMargin" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Indicates whether the outline of an object is justified with adjacent page margins.</desc>
						<label>Page margins</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="ObjectFrame" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Indicates whether to justify the outline of an object to that of an adjacent object.</desc>
						<label>Object frame</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="ObjectPoint" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Indicates whether to snap corner points of adjacent objects.</desc>
						<label>Object points</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Range" oor:type="xs:int">
					<!-- OldPath: Draw/Snap/Objects -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap to -->
					<info>
						<desc>Specifies the maximal range in pixel along the coordinate axes at which snapping becomes active.</desc>
						<label>Snap range</label>
					</info>
					<constraints>
						<minInclusive oor:value="1">
							<info>
								<desc>Specifies that the minimum snap range is 1.</desc>
							</info>
						</minInclusive>
						<maxInclusive oor:value="50">
							<info>
								<desc>Specifies that the maximum snap range is 50.</desc>
							</info>
						</maxInclusive>
					</constraints>
					<value>5</value>
				</prop>
			</group>
			<group oor:name="Position">
				<info>
					<desc>Specifies constraints regarding the creation and modification of graphical objects.</desc>
				</info>
				<prop oor:name="CreatingMoving" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Position -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap position -->
					<info>
						<desc>Indicates whether to restrict the creation of objects to squares, circles, etc. and to retain the x/y ratio when resizing.</desc>
						<label>When creating or moving objects</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="ExtendEdges" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Position -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap position -->
					<info>
						<desc>Indicates whether to use the longer (true) or the shorter (false) of the two distances along the coordinates axes from the initial to the current position to determine a new square&apos;s edge length or a new circle&apos;s diameter.</desc>
						<label>Extend edges</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="Rotating" oor:type="xs:boolean">
					<!-- OldPath: Draw/Snap/Position -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap position -->
					<info>
						<desc>Indicates whether to use snapping while rotating an object.</desc>
						<label>When rotating</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="RotatingValue" oor:type="xs:int">
					<!-- OldPath: Draw/Snap/Position -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap position -->
					<info>
						<desc>Specifies the rotation angle as a multiple of this input value when snapping for rotation is enabled. [UNIT=Degree/100]</desc>
						<label>When rotating</label>
					</info>
					<constraints>
						<minInclusive oor:value="0">
							<info>
								<desc>Specifies that the minimum rotation angle is 0/100 degrees.</desc>
							</info>
						</minInclusive>
						<maxInclusive oor:value="18000">
							<info>
								<desc>Specifies that the maximum rotation angle is 18000/100 degrees.</desc>
							</info>
						</maxInclusive>
					</constraints>
					<value>1500</value>
				</prop>
				<prop oor:name="PointReduction" oor:type="xs:int">
					<!-- OldPath: Draw/Snap/Position -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Snap to Grid - [Section] Snap position -->
					<info>
						<desc>Specifies the maximum angle that you can move a line before it snaps into place in the point editor that connects two points [UNIT=Degree/100].</desc>
						<label>Point reduction</label>
					</info>
					<constraints>
						<minInclusive oor:value="100">
							<info>
								<desc>Specifies that the minimum angle is 100/100 degrees.</desc>
							</info>
						</minInclusive>
						<maxInclusive oor:value="9000">
							<info>
								<desc>Specifies that the maximum angle is 9000/100 degrees.</desc>
							</info>
						</maxInclusive>
					</constraints>
					<value>1500</value>
				</prop>
			</group>
		</group>
		<group oor:name="Zoom">
			<info>
				<desc>Contains configuration items related to zooming.</desc>
			</info>
			<prop oor:name="ScaleX" oor:type="xs:int">
				<!-- OldPath: Draw/Zoom -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Zoom - [Section] Scale -->
				<info>
					<desc>Specifies zoom factor along the horizontal axis.</desc>
					<label>Scale</label>
				</info>
				<value>1</value>
			</prop>
			<prop oor:name="ScaleY" oor:type="xs:int">
				<!-- OldPath: Draw/Zoom -->
				<!-- OldLocation: Soffice.cfg -->
				<!-- UIHints: Tools - Options - Drawing - Zoom - [Section] Scale -->
				<info>
					<desc>Specifies zoom factor along the vertical axis.</desc>
					<label>Scale</label>
				</info>
				<value>1</value>
			</prop>
		</group>
		<group oor:name="Grid">
			<info>
				<desc>Defines handling and display of the (snap) grid.</desc>
			</info>
			<group oor:name="Option">
				<info>
					<desc>Switches regarding use and display of the (snap) grid.</desc>
				</info>
				<prop oor:name="SnapToGrid" oor:type="xs:boolean">
					<!-- OldPath: Draw/Grid/Options -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Options -->
					<info>
						<desc>Indicates whether to force frames and drawing elements on grid points.</desc>
						<label>Snap to grid</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="VisibleGrid" oor:type="xs:boolean">
					<!-- OldPath: Draw/Grid/Options -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Options -->
					<info>
						<desc>Indicates whether to show the grid.</desc>
						<label>Visible grid</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Synchronize" oor:type="xs:boolean">
					<!-- OldPath: Draw/Grid/Options -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Options -->
					<info>
						<desc>Indicates whether to synchronize the resolutions of x- and y-grids.</desc>
						<label>Synchronize axes</label>
					</info>
					<value>false</value>
				</prop>
			</group>
			<group oor:name="Resolution">
				<info>
					<desc>Specifies the grid resolution.</desc>
				</info>
				<group oor:name="XAxis">
					<!-- OldPath: Draw/Grid/Resolution -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Grid -->
					<!-- Notice: Default-nonmetrical value: 1270 1/100 mm. -->
					<info>
						<desc>Defines the horizontal distance between adjacent grid points.</desc>
						<label>X Axis Resolution</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1000</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1270</value>
					</prop>
				</group>
				<group oor:name="YAxis">
					<!-- OldPath: Draw/Grid/Resolution -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Grid -->
					<!-- Notice: Default- nonmetrical value: 1270 1/100 mm. -->
					<info>
						<desc>Defines the vertical distance between adjacent grid points.</desc>
						<label>Y Axis Resolution</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1000</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1270</value>
					</prop>
				</group>
			</group>
			<group oor:name="Subdivision">
				<info>
					<desc>Specifies the subdivision of the grid.</desc>
				</info>
				<prop oor:name="XAxis" oor:type="xs:double">
					<!-- OldPath: Draw/Grid/Subdivision -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Grid -->
					<!-- Notice: Default value for English Version only: 254 Points) -->
					<info>
						<desc>Specifies the number of points between two grid points on the X axis.</desc>
						<label>X Axis Subdivision</label>
					</info>
					<value>9</value>
				</prop>
				<prop oor:name="YAxis" oor:type="xs:double">
					<!-- OldPath: Draw/Grid/Subdivision -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Grid -->
					<!-- Notice: Default value for English Version only: 254 Points) -->
					<info>
						<desc>Specifies the number of points between two grid points on the Y axis.</desc>
						<label>Y Axis Subdivision</label>
					</info>
					<value>9</value>
				</prop>
			</group>
			<group oor:name="SnapGrid">
				<info>
					<desc>Specifies the snap grid.</desc>
				</info>
				<prop oor:name="Size" oor:type="xs:boolean">
					<!-- OldPath: Draw/Grid/Snap_Grid -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Snap grid -->
					<info>
						<desc>Indicates whether to synchronize grid and snap-grid.</desc>
						<label>Size to grid</label>
					</info>
					<value>true</value>
				</prop>
				<group oor:name="XAxis">
					<!-- OldPath: Draw/Grid/Snap_Grid -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Snap grid -->
					<!-- Notice: Default-nonmetrical value: 1270 1/100 mm. -->
					<info>
						<desc>Defines the horizontal distance between adjacent points of the snap grid.</desc>
						<label>X axis</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1000</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1270</value>
					</prop>
				</group>
				<group oor:name="YAxis">
					<!-- OldPath: Draw/Grid/Snap_Grid -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Grid - [Section] Snap grid -->
					<!-- Notice: Default-Default-nonmetrical value: 1270 1/100 mm. -->
					<info>
						<desc>Defines the vertical distance between adjacent points of the snap grid.</desc>
						<label>Y axis</label>
					</info>
					<prop oor:name="Metric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1000</value>
					</prop>
					<prop oor:name="NonMetric" oor:type="xs:int">
						<info>
							<desc>[UNIT=1/100 mm]</desc>
							<label/>
						</info>
						<value>1270</value>
					</prop>
				</group>
			</group>
		</group>
		<group oor:name="Print">
			<info>
				<desc>Defines options regarding the printing of Draw documents.</desc>
			</info>
			<group oor:name="Content">
				<info>
					<desc>Defines options regarding the printing of document content.</desc>
				</info>
				<prop oor:name="Drawing" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Contents -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Contents -->
					<info>
						<desc>Indicates whether the drawing page (in contrast to master page) will be printed.</desc>
						<label>Drawing</label>
					</info>
					<value>true</value>
				</prop>
			</group>
			<group oor:name="Page">
				<info>
					<desc>Specifies how and what pages will be printed.</desc>
				</info>
				<prop oor:name="PageSize" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Page -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Page options -->
					<info>
						<desc>Indicates whether to enlarge or shrink a document&apos;s page size while printing to fit the physical paper size.</desc>
						<label>Fit to page</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="PageTile" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Page -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Page options -->
					<info>
						<desc>Indicates whether to print the pages&apos; titles at the top of every page.</desc>
						<label>Tile pages</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Booklet" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Page -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Page options -->
					<info>
						<desc>Indicates whether to print a document in the form of a brochure.</desc>
						<label>Brochure</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="BookletFront" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Page -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Page options -->
					<info>
						<desc>Indicates whether to print the front side pages of a brochure.</desc>
						<label>Front side</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="BookletBack" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print/Page -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Page options -->
					<info>
						<desc>Indicates whether to print the back side pages of a brochure.</desc>
						<label>Back side</label>
					</info>
					<value>true</value>
				</prop>
			</group>
			<group oor:name="Other">
				<info>
					<desc>Contains specifications of general printing related issues.</desc>
				</info>
				<prop oor:name="PageName" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Print -->
					<info>
						<desc>Indicates whether to print page names.</desc>
						<label>Page name</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Date" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Print -->
					<info>
						<desc>Indicates whether to print the current date at the top of every page.</desc>
						<label>Date</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="Time" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Print -->
					<info>
						<desc>Indicates whether to print the current time at the top of every page.</desc>
						<label>Time</label>
					</info>
					<value>false</value>
				</prop>
				<prop oor:name="HiddenPage" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Print -->
					<info>
						<desc>Indicates whether to print hidden pages.</desc>
						<label>Hidden pages</label>
					</info>
					<value>true</value>
				</prop>
				<prop oor:name="Quality" oor:type="xs:int">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Section] Quality -->
					<info>
						<desc>Specifies the quality of the printed colors.</desc>
					</info>
					<constraints>
						<enumeration oor:value="0">
							<info>
								<desc>Color</desc>
							</info>
						</enumeration>
						<enumeration oor:value="1">
							<info>
								<desc>Grayscale</desc>
							</info>
						</enumeration>
						<enumeration oor:value="2">
							<info>
								<desc>Black/White</desc>
							</info>
						</enumeration>
					</constraints>
					<value>0</value>
				</prop>
				<prop oor:name="FromPrinterSetup" oor:type="xs:boolean">
					<!-- OldPath: Draw/Print -->
					<!-- OldLocation: Soffice.cfg -->
					<!-- UIHints: Tools - Options - Drawing - Print - [Check box] From printer setup -->
					<info>
						<desc>Indicates whether to use the system settings of the printer to choose the paper tray.</desc>
						<label>From printer setup</label>
					</info>
					<value>false</value>
				</prop>
			</group>
		</group>
	</component>
</oor:component-schema>