xref: /trunk/main/svtools/source/dialogs/prnsetup.cxx (revision 5900e8ec)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svtools.hxx"
#include <tools/debug.hxx>
#ifndef _VCL_PRINT_HXX
#include <vcl/print.hxx>
#endif

#ifndef GCC
#endif

#include <svtools/svtdata.hxx>
#include "prnsetup.hrc"
#include <svtools/prnsetup.hxx>

// =======================================================================

void ImplFillPrnDlgListBox( const Printer* pPrinter,
							ListBox* pBox, PushButton* pPropBtn )
{
	ImplFreePrnDlgListBox( pBox );

    const std::vector<rtl::OUString>& rPrinters = Printer::GetPrinterQueues();
	unsigned int nCount = rPrinters.size();
	if ( nCount )
	{
		for( unsigned int i = 0; i < nCount; i++ )
			pBox->InsertEntry( rPrinters[i] );
		pBox->SelectEntry( pPrinter->GetName() );
	}

	pBox->Enable( nCount != 0 );
	pPropBtn->Show( pPrinter->HasSupport( SUPPORT_SETUPDIALOG ) );
}

// -----------------------------------------------------------------------

void ImplFreePrnDlgListBox( ListBox* pBox, sal_Bool bClear )
{
	if ( bClear )
		pBox->Clear();
}

// -----------------------------------------------------------------------

Printer* ImplPrnDlgListBoxSelect( ListBox* pBox, PushButton* pPropBtn,
								  Printer* pPrinter, Printer* pTempPrinter )
{
	if ( pBox->GetSelectEntryPos() != LISTBOX_ENTRY_NOTFOUND )
	{
		const QueueInfo* pInfo = Printer::GetQueueInfo( pBox->GetSelectEntry(), true );
        if( pInfo)
        {
            if ( !pTempPrinter )
            {
                if ( (pPrinter->GetName() == pInfo->GetPrinterName()) &&
                     (pPrinter->GetDriverName() == pInfo->GetDriver()) )
                    pTempPrinter = new Printer( pPrinter->GetJobSetup() );
                else
                    pTempPrinter = new Printer( *pInfo );
            }
            else
            {
                if ( (pTempPrinter->GetName() != pInfo->GetPrinterName()) ||
                     (pTempPrinter->GetDriverName() != pInfo->GetDriver()) )
                {
                    delete pTempPrinter;
                    pTempPrinter = new Printer( *pInfo );
                }
            }

            pPropBtn->Enable( pTempPrinter->HasSupport( SUPPORT_SETUPDIALOG ) );
        }
        else
            pPropBtn->Disable();
	}
	else
		pPropBtn->Disable();

	return pTempPrinter;
}

// -----------------------------------------------------------------------

Printer* ImplPrnDlgUpdatePrinter( Printer* pPrinter, Printer* pTempPrinter )
{
	XubString aPrnName;
	if ( pTempPrinter )
		aPrnName = pTempPrinter->GetName();
	else
		aPrnName = pPrinter->GetName();

	if ( ! Printer::GetQueueInfo( aPrnName, false ) )
	{
		if ( pTempPrinter )
			delete pTempPrinter;
		pTempPrinter = new Printer;
	}

	return pTempPrinter;
}

// -----------------------------------------------------------------------

void ImplPrnDlgUpdateQueueInfo( ListBox* pBox, QueueInfo& rInfo )
{
	if ( pBox->GetSelectEntryPos() != LISTBOX_ENTRY_NOTFOUND )
	{
        const QueueInfo* pInfo = Printer::GetQueueInfo( pBox->GetSelectEntry(), true );
        if( pInfo )
			rInfo = *pInfo;
	}
}

// -----------------------------------------------------------------------

static void ImplPrnDlgAddString( XubString& rStr, const XubString& rAddStr )
{
	if ( rStr.Len() )
		rStr.AppendAscii( "; " );
	rStr += rAddStr;
}

// -----------------------------------------------------------------------

static void ImplPrnDlgAddResString( XubString& rStr, sal_uInt16 nResId )
{
	SvtResId aResId( nResId );
	XubString aAddStr( aResId );
	ImplPrnDlgAddString( rStr, aAddStr );
}

// -----------------------------------------------------------------------

XubString ImplPrnDlgGetStatusText( const QueueInfo& rInfo )
{
	XubString	aStr;
	sal_uLong		nStatus = rInfo.GetStatus();

	// Default-Printer
	if ( rInfo.GetPrinterName().Len() &&
		 (rInfo.GetPrinterName() == Printer::GetDefaultPrinterName()) )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_DEFPRINTER );

	// Status
	if ( nStatus & QUEUE_STATUS_READY )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_READY );
	if ( nStatus & QUEUE_STATUS_PAUSED )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAUSED );
	if ( nStatus & QUEUE_STATUS_PENDING_DELETION )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PENDING );
	if ( nStatus & QUEUE_STATUS_BUSY )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_BUSY );
	if ( nStatus & QUEUE_STATUS_INITIALIZING )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_INITIALIZING );
	if ( nStatus & QUEUE_STATUS_WAITING )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_WAITING );
	if ( nStatus & QUEUE_STATUS_WARMING_UP )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_WARMING_UP );
	if ( nStatus & QUEUE_STATUS_PROCESSING )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PROCESSING );
	if ( nStatus & QUEUE_STATUS_PRINTING )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PRINTING );
	if ( nStatus & QUEUE_STATUS_OFFLINE )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OFFLINE );
	if ( nStatus & QUEUE_STATUS_ERROR )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_ERROR );
	if ( nStatus & QUEUE_STATUS_SERVER_UNKNOWN )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_SERVER_UNKNOWN );
	if ( nStatus & QUEUE_STATUS_PAPER_JAM )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_JAM );
	if ( nStatus & QUEUE_STATUS_PAPER_OUT )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_OUT );
	if ( nStatus & QUEUE_STATUS_MANUAL_FEED )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_MANUAL_FEED );
	if ( nStatus & QUEUE_STATUS_PAPER_PROBLEM )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_PROBLEM );
	if ( nStatus & QUEUE_STATUS_IO_ACTIVE )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_IO_ACTIVE );
	if ( nStatus & QUEUE_STATUS_OUTPUT_BIN_FULL )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OUTPUT_BIN_FULL );
	if ( nStatus & QUEUE_STATUS_TONER_LOW )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_TONER_LOW );
	if ( nStatus & QUEUE_STATUS_NO_TONER )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_NO_TONER );
	if ( nStatus & QUEUE_STATUS_PAGE_PUNT )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAGE_PUNT );
	if ( nStatus & QUEUE_STATUS_USER_INTERVENTION )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_USER_INTERVENTION );
	if ( nStatus & QUEUE_STATUS_OUT_OF_MEMORY )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OUT_OF_MEMORY );
	if ( nStatus & QUEUE_STATUS_DOOR_OPEN )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_DOOR_OPEN );
	if ( nStatus & QUEUE_STATUS_POWER_SAVE )
		ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_POWER_SAVE );

	// Anzahl Jobs
	sal_uLong nJobs = rInfo.GetJobs();
	if ( nJobs && (nJobs != QUEUE_JOBS_DONTKNOW) )
	{
		XubString aJobStr( SvtResId( STR_SVT_PRNDLG_JOBCOUNT ) );
		XubString aJobs( XubString::CreateFromInt32( nJobs ) );
		aJobStr.SearchAndReplaceAscii( "%d", aJobs );
		ImplPrnDlgAddString( aStr, aJobStr );
	}

	return aStr;
}

// =======================================================================

PrinterSetupDialog::PrinterSetupDialog( Window* pWindow ) :
	ModalDialog 	( pWindow, SvtResId( DLG_SVT_PRNDLG_PRNSETUPDLG ) ),
	maFlPrinter		( this, SvtResId( FL_PRINTER ) ),
	maFtName		( this, SvtResId( FT_NAME ) ),
	maLbName		( this, SvtResId( LB_NAMES ) ),
	maBtnProperties ( this, SvtResId( BTN_PROPERTIES ) ),
	maBtnOptions    ( this, SvtResId( BTN_OPTIONS ) ),
	maFtStatus		( this, SvtResId( FT_STATUS ) ),
	maFiStatus		( this, SvtResId( FI_STATUS ) ),
	maFtType		( this, SvtResId( FT_TYPE ) ),
	maFiType		( this, SvtResId( FI_TYPE ) ),
	maFtLocation	( this, SvtResId( FT_LOCATION ) ),
	maFiLocation	( this, SvtResId( FI_LOCATION ) ),
	maFtComment 	( this, SvtResId( FT_COMMENT ) ),
	maFiComment 	( this, SvtResId( FI_COMMENT ) ),
    maFlSepButton	( this, SvtResId( FL_SEPBUTTON ) ),
	maBtnOK 		( this, SvtResId( BTN_OK ) ),
	maBtnCancel 	( this, SvtResId( BTN_CANCEL ) ),
	maBtnHelp		( this, SvtResId( BTN_HELP ) )
{
	FreeResource();

    // show options button only if link is set
    maBtnOptions.Hide();

	mpPrinter		= NULL;
	mpTempPrinter	= NULL;

	maStatusTimer.SetTimeout( IMPL_PRINTDLG_STATUS_UPDATE );
	maStatusTimer.SetTimeoutHdl( LINK( this, PrinterSetupDialog, ImplStatusHdl ) );
	maBtnProperties.SetClickHdl( LINK( this, PrinterSetupDialog, ImplPropertiesHdl ) );
	maLbName.SetSelectHdl( LINK( this, PrinterSetupDialog, ImplChangePrinterHdl ) );
}

// -----------------------------------------------------------------------

PrinterSetupDialog::~PrinterSetupDialog()
{
	ImplFreePrnDlgListBox( &maLbName, sal_False );
	delete mpTempPrinter;
}

// -----------------------------------------------------------------------

void PrinterSetupDialog::SetOptionsHdl( const Link& rLink )
{
    maBtnOptions.SetClickHdl( rLink );
    maBtnOptions.Show( rLink.IsSet() );
}

const Link& PrinterSetupDialog::GetOptionsHdl() const
{
    return maBtnOptions.GetClickHdl();
}

void PrinterSetupDialog::ImplSetInfo()
{
	const QueueInfo* pInfo = Printer::GetQueueInfo(maLbName.GetSelectEntry(), true);
	if ( pInfo )
	{
		maFiType.SetText( pInfo->GetDriver() );
		maFiLocation.SetText( pInfo->GetLocation() );
		maFiComment.SetText( pInfo->GetComment() );
		maFiStatus.SetText( ImplPrnDlgGetStatusText( *pInfo ) );
	}
	else
	{
		XubString aTempStr;
		maFiType.SetText( aTempStr );
		maFiLocation.SetText( aTempStr );
		maFiComment.SetText( aTempStr );
		maFiStatus.SetText( aTempStr );
	}
}

// -----------------------------------------------------------------------

IMPL_LINK( PrinterSetupDialog, ImplStatusHdl, Timer*, EMPTYARG )
{
	QueueInfo aInfo;
	ImplPrnDlgUpdateQueueInfo( &maLbName, aInfo );
	maFiStatus.SetText( ImplPrnDlgGetStatusText( aInfo ) );

	return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( PrinterSetupDialog, ImplPropertiesHdl, void*, EMPTYARG )
{
	if ( !mpTempPrinter )
		mpTempPrinter = new Printer( mpPrinter->GetJobSetup() );
	mpTempPrinter->Setup( this );

	return 0;
}

// -----------------------------------------------------------------------

IMPL_LINK( PrinterSetupDialog, ImplChangePrinterHdl, void*, EMPTYARG )
{
	mpTempPrinter = ImplPrnDlgListBoxSelect( &maLbName, &maBtnProperties,
											 mpPrinter, mpTempPrinter );
	ImplSetInfo();
	return 0;
}

// -----------------------------------------------------------------------

long PrinterSetupDialog::Notify( NotifyEvent& rNEvt )
{
	if ( (rNEvt.GetType() == EVENT_GETFOCUS) && IsReallyVisible() )
		ImplStatusHdl( &maStatusTimer );

	return ModalDialog::Notify( rNEvt );
}

// -----------------------------------------------------------------------

void PrinterSetupDialog::DataChanged( const DataChangedEvent& rDCEvt )
{
	if ( rDCEvt.GetType() == DATACHANGED_PRINTER )
	{
		mpTempPrinter = ImplPrnDlgUpdatePrinter( mpPrinter, mpTempPrinter );
		Printer* pPrn;
		if ( mpTempPrinter )
			pPrn = mpTempPrinter;
		else
			pPrn = mpPrinter;
		ImplFillPrnDlgListBox( pPrn, &maLbName, &maBtnProperties );
		ImplSetInfo();
	}

	ModalDialog::DataChanged( rDCEvt );
}

// -----------------------------------------------------------------------

short PrinterSetupDialog::Execute()
{
	if ( !mpPrinter || mpPrinter->IsPrinting() || mpPrinter->IsJobActive() )
	{
		DBG_ERRORFILE( "PrinterSetupDialog::Execute() - No Printer or printer is printing" );
		return sal_False;
	}

    Printer::updatePrinters();

	ImplFillPrnDlgListBox( mpPrinter, &maLbName, &maBtnProperties );
	ImplSetInfo();
	maStatusTimer.Start();

	// Dialog starten
	short nRet = ModalDialog::Execute();

	// Wenn Dialog mit OK beendet wurde, dann die Daten updaten
	if ( nRet == sal_True )
	{
		if ( mpTempPrinter )
			mpPrinter->SetPrinterProps( mpTempPrinter );
	}

	maStatusTimer.Stop();

	return nRet;
}