1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_svtools.hxx"
26 //_________________________________________________________________________________________________________________
27 // includes
28 //_________________________________________________________________________________________________________________
29
30 #include <svtools/miscopt.hxx>
31 #include <unotools/configmgr.hxx>
32 #include <unotools/configitem.hxx>
33 #include <tools/debug.hxx>
34 #include <com/sun/star/uno/Any.hxx>
35 #include <com/sun/star/uno/Sequence.hxx>
36 #include <tools/link.hxx>
37 #include <tools/list.hxx>
38 #include <tools/wldcrd.hxx>
39 #include <tools/urlobj.hxx>
40
41 #include <rtl/logfile.hxx>
42 #include "itemholder2.hxx"
43
44 #include <svtools/imgdef.hxx>
45 #include <vcl/svapp.hxx>
46
47 //_________________________________________________________________________________________________________________
48 // namespaces
49 //_________________________________________________________________________________________________________________
50
51 using namespace ::utl ;
52 using namespace ::rtl ;
53 using namespace ::osl ;
54 using namespace ::com::sun::star::uno ;
55 using namespace ::com::sun::star;
56
57 //_________________________________________________________________________________________________________________
58 // const
59 //_________________________________________________________________________________________________________________
60
61 #define ASCII_STR(s) OUString( RTL_CONSTASCII_USTRINGPARAM(s) )
62 #define ROOTNODE_MISC ASCII_STR("Office.Common/Misc")
63 #define DEFAULT_PLUGINSENABLED sal_True;
64
65 #define PROPERTYNAME_PLUGINSENABLED ASCII_STR("PluginsEnabled")
66 #define PROPERTYHANDLE_PLUGINSENABLED 0
67 #define PROPERTYNAME_SYMBOLSET ASCII_STR("SymbolSet")
68 #define PROPERTYHANDLE_SYMBOLSET 1
69 #define PROPERTYNAME_TOOLBOXSTYLE ASCII_STR("ToolboxStyle")
70 #define PROPERTYHANDLE_TOOLBOXSTYLE 2
71 #define PROPERTYNAME_USESYSTEMFILEDIALOG ASCII_STR("UseSystemFileDialog")
72 #define PROPERTYHANDLE_USESYSTEMFILEDIALOG 3
73 #define PROPERTYNAME_SYMBOLSTYLE ASCII_STR("SymbolStyle")
74 #define PROPERTYHANDLE_SYMBOLSTYLE 4
75 #define PROPERTYNAME_USESYSTEMPRINTDIALOG ASCII_STR("UseSystemPrintDialog")
76 #define PROPERTYHANDLE_USESYSTEMPRINTDIALOG 5
77
78 #define PROPERTYCOUNT 6
79
80 #define VCL_TOOLBOX_STYLE_FLAT ((sal_uInt16)0x0004) // from <vcl/toolbox.hxx>
81
82 DECLARE_LIST( LinkList, Link * )
83
84 //_________________________________________________________________________________________________________________
85 // private declarations!
86 //_________________________________________________________________________________________________________________
87
88 class SvtMiscOptions_Impl : public ConfigItem
89 {
90 //-------------------------------------------------------------------------------------------------------------
91 // private member
92 //-------------------------------------------------------------------------------------------------------------
93
94 private:
95 LinkList aList;
96 sal_Bool m_bUseSystemFileDialog;
97 sal_Bool m_bIsUseSystemFileDialogRO;
98 sal_Bool m_bPluginsEnabled;
99 sal_Bool m_bIsPluginsEnabledRO;
100 sal_Int16 m_nSymbolsSize;
101 sal_Bool m_bIsSymbolsSizeRO;
102 sal_Bool m_bIsSymbolsStyleRO;
103 sal_Int16 m_nToolboxStyle;
104 sal_Bool m_bIsToolboxStyleRO;
105 sal_Bool m_bUseSystemPrintDialog;
106 sal_Bool m_bIsUseSystemPrintDialogRO;
107
108 //-------------------------------------------------------------------------------------------------------------
109 // public methods
110 //-------------------------------------------------------------------------------------------------------------
111
112 public:
113
114 //---------------------------------------------------------------------------------------------------------
115 // constructor / destructor
116 //---------------------------------------------------------------------------------------------------------
117
118 SvtMiscOptions_Impl();
119 ~SvtMiscOptions_Impl();
120
121 //---------------------------------------------------------------------------------------------------------
122 // overloaded methods of baseclass
123 //---------------------------------------------------------------------------------------------------------
124
125 /*-****************************************************************************************************//**
126 @short called for notify of configmanager
127 @descr These method is called from the ConfigManager before application ends or from the
128 PropertyChangeListener if the sub tree broadcasts changes. You must update your
129 internal values.
130
131 @seealso baseclass ConfigItem
132
133 @param "seqPropertyNames" is the list of properties which should be updated.
134 @return -
135
136 @onerror -
137 *//*-*****************************************************************************************************/
138
139 virtual void Notify( const Sequence< OUString >& seqPropertyNames );
140
141 /** loads required data from the configuration. It's called in the constructor to
142 read all entries and form ::Notify to re-read changed settings
143
144 */
145 void Load( const Sequence< OUString >& rPropertyNames );
146
147 /*-****************************************************************************************************//**
148 @short write changes to configuration
149 @descr These method writes the changed values into the sub tree
150 and should always called in our destructor to guarantee consistency of config data.
151
152 @seealso baseclass ConfigItem
153
154 @param -
155 @return -
156
157 @onerror -
158 *//*-*****************************************************************************************************/
159
160 virtual void Commit();
161
162 //---------------------------------------------------------------------------------------------------------
163 // public interface
164 //---------------------------------------------------------------------------------------------------------
165
UseSystemFileDialog() const166 inline sal_Bool UseSystemFileDialog() const
167 { return m_bUseSystemFileDialog; }
168
SetUseSystemFileDialog(sal_Bool bSet)169 inline void SetUseSystemFileDialog( sal_Bool bSet )
170 { m_bUseSystemFileDialog = bSet; SetModified(); }
171
IsUseSystemFileDialogReadOnly() const172 inline sal_Bool IsUseSystemFileDialogReadOnly() const
173 { return m_bIsUseSystemFileDialogRO; }
174
IsPluginsEnabled() const175 inline sal_Bool IsPluginsEnabled() const
176 { return m_bPluginsEnabled; }
177
178 void SetPluginsEnabled( sal_Bool bEnable );
179
IsPluginsEnabledReadOnly() const180 inline sal_Bool IsPluginsEnabledReadOnly() const
181 { return m_bIsPluginsEnabledRO; }
182
GetSymbolsSize()183 inline sal_Int16 GetSymbolsSize()
184 { return m_nSymbolsSize; }
185
186 void SetSymbolsSize( sal_Int16 nSet );
187
IsGetSymbolsSizeReadOnly()188 inline sal_Bool IsGetSymbolsSizeReadOnly()
189 { return m_bIsSymbolsSizeRO; }
190
191 sal_Int16 GetSymbolsStyle() const;
192 ::rtl::OUString GetSymbolsStyleName() const;
193 sal_Int16 GetCurrentSymbolsStyle() const;
194
SetSymbolsStyle(sal_Int16 nSet)195 inline void SetSymbolsStyle( sal_Int16 nSet )
196 { ImplSetSymbolsStyle( true, nSet, ::rtl::OUString() ); }
197
SetSymbolsStyleName(::rtl::OUString & rName)198 inline void SetSymbolsStyleName( ::rtl::OUString &rName )
199 { ImplSetSymbolsStyle( false, 0, rName ); }
200
IsGetSymbolsStyleReadOnly()201 inline sal_Bool IsGetSymbolsStyleReadOnly()
202 { return m_bIsSymbolsStyleRO; }
203
204 // translate to VCL settings ( "0" = 3D, "1" = FLAT )
GetToolboxStyle()205 inline sal_Int16 GetToolboxStyle()
206 { return m_nToolboxStyle ? VCL_TOOLBOX_STYLE_FLAT : 0; }
207
208 // translate from VCL settings
209 void SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified );
210
IsGetToolboxStyleReadOnly()211 inline sal_Bool IsGetToolboxStyleReadOnly()
212 { return m_bIsToolboxStyleRO; }
213
UseSystemPrintDialog() const214 inline sal_Bool UseSystemPrintDialog() const
215 { return m_bUseSystemPrintDialog; }
216
SetUseSystemPrintDialog(sal_Bool bSet)217 inline void SetUseSystemPrintDialog( sal_Bool bSet )
218 { m_bUseSystemPrintDialog = bSet; SetModified(); }
219
IsUseSystemPrintDialogReadOnly() const220 inline sal_Bool IsUseSystemPrintDialogReadOnly() const
221 { return m_bIsUseSystemPrintDialogRO; }
222
223 void AddListenerLink( const Link& rLink );
224 void RemoveListenerLink( const Link& rLink );
225 void CallListeners();
226
227 //-------------------------------------------------------------------------------------------------------------
228 // private methods
229 //-------------------------------------------------------------------------------------------------------------
230
231 private:
232
233 /*-****************************************************************************************************//**
234 @short return list of key names of ouer configuration management which represent oue module tree
235 @descr These methods return a static const list of key names. We need it to get needed values from our
236 configuration management.
237
238 @seealso -
239
240 @param -
241 @return A list of needed configuration keys is returned.
242
243 @onerror -
244 *//*-*****************************************************************************************************/
245
246 static Sequence< OUString > GetPropertyNames();
247
248 protected:
249 void ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName );
250 };
251
252 //*****************************************************************************************************************
253 // constructor
254 //*****************************************************************************************************************
SvtMiscOptions_Impl()255 SvtMiscOptions_Impl::SvtMiscOptions_Impl()
256 // Init baseclasses first
257 : ConfigItem( ROOTNODE_MISC )
258
259 , m_bUseSystemFileDialog( sal_False )
260 , m_bIsUseSystemFileDialogRO( sal_False )
261 , m_bPluginsEnabled( sal_False )
262 , m_bIsPluginsEnabledRO( sal_False )
263 , m_nSymbolsSize( 0 )
264 , m_bIsSymbolsSizeRO( sal_False )
265 , m_bIsSymbolsStyleRO( sal_False )
266 , m_nToolboxStyle( 1 )
267 , m_bIsToolboxStyleRO( sal_False )
268 , m_bUseSystemPrintDialog( sal_False )
269 , m_bIsUseSystemPrintDialogRO( sal_False )
270
271 {
272 // Use our static list of configuration keys to get his values.
273 Sequence< OUString > seqNames = GetPropertyNames ( );
274 Load( seqNames );
275 Sequence< Any > seqValues = GetProperties ( seqNames );
276 Sequence< sal_Bool > seqRO = GetReadOnlyStates ( seqNames );
277
278 // Safe impossible cases.
279 // We need values from ALL configuration keys.
280 // Follow assignment use order of values in relation to our list of key names!
281 DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtMiscOptions_Impl::SvtMiscOptions_Impl()\nI miss some values of configuration keys!\n" );
282
283 // Copy values from list in right order to ouer internal member.
284 sal_Int32 nPropertyCount = seqValues.getLength();
285 for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
286 {
287 // Safe impossible cases.
288 // Check any for valid value.
289 DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" );
290 switch( nProperty )
291 {
292 case PROPERTYHANDLE_PLUGINSENABLED :
293 {
294 if( !(seqValues[nProperty] >>= m_bPluginsEnabled) )
295 {
296 DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" );
297 }
298 m_bIsPluginsEnabledRO = seqRO[nProperty];
299 break;
300 }
301
302 case PROPERTYHANDLE_SYMBOLSET :
303 {
304 if( !(seqValues[nProperty] >>= m_nSymbolsSize) )
305 {
306 DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" );
307 }
308 m_bIsSymbolsSizeRO = seqRO[nProperty];
309 break;
310 }
311
312 case PROPERTYHANDLE_TOOLBOXSTYLE :
313 {
314 if( !(seqValues[nProperty] >>= m_nToolboxStyle) )
315 {
316 DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" );
317 }
318 m_bIsToolboxStyleRO = seqRO[nProperty];
319 break;
320 }
321
322 case PROPERTYHANDLE_USESYSTEMFILEDIALOG :
323 {
324 if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) )
325 {
326 DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" );
327 }
328 m_bIsUseSystemFileDialogRO = seqRO[nProperty];
329 break;
330 }
331
332 case PROPERTYHANDLE_USESYSTEMPRINTDIALOG :
333 {
334 if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) )
335 {
336 DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" );
337 }
338 m_bIsUseSystemPrintDialogRO = seqRO[nProperty];
339 break;
340 }
341
342 case PROPERTYHANDLE_SYMBOLSTYLE :
343 {
344 ::rtl::OUString aSymbolsStyle;
345 if( seqValues[nProperty] >>= aSymbolsStyle )
346 SetSymbolsStyleName( aSymbolsStyle );
347 else
348 {
349 DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" );
350 }
351 m_bIsSymbolsStyleRO = seqRO[nProperty];
352 break;
353 }
354 }
355 }
356
357 // Enable notification mechanism of ouer baseclass.
358 // We need it to get information about changes outside these class on ouer used configuration keys!
359 EnableNotification( seqNames );
360 }
361
362 //*****************************************************************************************************************
363 // destructor
364 //*****************************************************************************************************************
~SvtMiscOptions_Impl()365 SvtMiscOptions_Impl::~SvtMiscOptions_Impl()
366 {
367 // We must save our current values .. if user forget it!
368 if( IsModified() == sal_True )
369 {
370 Commit();
371 }
372
373 for ( sal_uInt16 n=0; n<aList.Count(); )
374 delete aList.Remove(n);
375 }
376
377 /*-- 25.02.2005 13:22:04---------------------------------------------------
378
379 -----------------------------------------------------------------------*/
lcl_MapPropertyName(const::rtl::OUString rCompare,const uno::Sequence<::rtl::OUString> & aInternalPropertyNames)380 static int lcl_MapPropertyName( const ::rtl::OUString rCompare,
381 const uno::Sequence< ::rtl::OUString>& aInternalPropertyNames)
382 {
383 for(int nProp = 0; nProp < aInternalPropertyNames.getLength(); ++nProp)
384 {
385 if( aInternalPropertyNames[nProp] == rCompare )
386 return nProp;
387 }
388 return -1;
389 }
390
Load(const Sequence<OUString> & rPropertyNames)391 void SvtMiscOptions_Impl::Load( const Sequence< OUString >& rPropertyNames )
392 {
393 const uno::Sequence< ::rtl::OUString> aInternalPropertyNames( GetPropertyNames());
394 Sequence< Any > seqValues = GetProperties( rPropertyNames );
395
396 // Safe impossible cases.
397 // We need values from ALL configuration keys.
398 // Follow assignment use order of values in relation to our list of key names!
399 DBG_ASSERT( !(rPropertyNames.getLength()!=seqValues.getLength()), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nI miss some values of configuration keys!\n" );
400
401 // Copy values from list in right order to ouer internal member.
402 sal_Int32 nPropertyCount = seqValues.getLength();
403 for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
404 {
405 // Safe impossible cases.
406 // Check any for valid value.
407 DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtSecurityOptions_Impl::SvtSecurityOptions_Impl()\nInvalid property value detected!\n" );
408 switch( lcl_MapPropertyName(rPropertyNames[nProperty], aInternalPropertyNames) )
409 {
410 case PROPERTYHANDLE_PLUGINSENABLED : {
411 if( !(seqValues[nProperty] >>= m_bPluginsEnabled) )
412 {
413 DBG_ERROR("Wrong type of \"Misc\\PluginsEnabled\"!" );
414 }
415 }
416 break;
417 case PROPERTYHANDLE_SYMBOLSET : {
418 if( !(seqValues[nProperty] >>= m_nSymbolsSize) )
419 {
420 DBG_ERROR("Wrong type of \"Misc\\SymbolSet\"!" );
421 }
422 }
423 break;
424 case PROPERTYHANDLE_TOOLBOXSTYLE : {
425 if( !(seqValues[nProperty] >>= m_nToolboxStyle) )
426 {
427 DBG_ERROR("Wrong type of \"Misc\\ToolboxStyle\"!" );
428 }
429 }
430 break;
431 case PROPERTYHANDLE_USESYSTEMFILEDIALOG : {
432 if( !(seqValues[nProperty] >>= m_bUseSystemFileDialog) )
433 {
434 DBG_ERROR("Wrong type of \"Misc\\UseSystemFileDialog\"!" );
435 }
436 }
437 break;
438 case PROPERTYHANDLE_USESYSTEMPRINTDIALOG : {
439 if( !(seqValues[nProperty] >>= m_bUseSystemPrintDialog) )
440 {
441 DBG_ERROR("Wrong type of \"Misc\\UseSystemPrintDialog\"!" );
442 }
443 }
444 break;
445 case PROPERTYHANDLE_SYMBOLSTYLE : {
446 ::rtl::OUString aSymbolsStyle;
447 if( seqValues[nProperty] >>= aSymbolsStyle )
448 SetSymbolsStyleName( aSymbolsStyle );
449 else
450 {
451 DBG_ERROR("Wrong type of \"Misc\\SymbolStyle\"!" );
452 }
453 }
454 break;
455 }
456 }
457 }
458
AddListenerLink(const Link & rLink)459 void SvtMiscOptions_Impl::AddListenerLink( const Link& rLink )
460 {
461 aList.Insert( new Link( rLink ) );
462 }
463
RemoveListenerLink(const Link & rLink)464 void SvtMiscOptions_Impl::RemoveListenerLink( const Link& rLink )
465 {
466 for ( sal_uInt16 n=0; n<aList.Count(); n++ )
467 {
468 if ( (*aList.GetObject(n) ) == rLink )
469 {
470 delete aList.Remove(n);
471 break;
472 }
473 }
474 }
475
CallListeners()476 void SvtMiscOptions_Impl::CallListeners()
477 {
478 for ( sal_uInt16 n = 0; n < aList.Count(); ++n )
479 aList.GetObject(n)->Call( this );
480 }
481
SetToolboxStyle(sal_Int16 nStyle,bool _bSetModified)482 void SvtMiscOptions_Impl::SetToolboxStyle( sal_Int16 nStyle, bool _bSetModified )
483 {
484 m_nToolboxStyle = nStyle ? 1 : 0;
485 if ( _bSetModified )
486 SetModified();
487 CallListeners();
488 }
489
SetSymbolsSize(sal_Int16 nSet)490 void SvtMiscOptions_Impl::SetSymbolsSize( sal_Int16 nSet )
491 {
492 m_nSymbolsSize = nSet;
493 SetModified();
494 CallListeners();
495 }
496
GetSymbolsStyle() const497 sal_Int16 SvtMiscOptions_Impl::GetSymbolsStyle() const
498 {
499 return (sal_Int16)Application::GetSettings().GetStyleSettings().GetSymbolsStyle();
500 }
501
GetSymbolsStyleName() const502 ::rtl::OUString SvtMiscOptions_Impl::GetSymbolsStyleName() const
503 {
504 return Application::GetSettings().GetStyleSettings().GetSymbolsStyleName();
505 }
506
GetCurrentSymbolsStyle() const507 sal_Int16 SvtMiscOptions_Impl::GetCurrentSymbolsStyle() const
508 {
509 return (sal_Int16)Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyle();
510 }
511
ImplSetSymbolsStyle(bool bValue,sal_Int16 nSet,const::rtl::OUString & rName)512 void SvtMiscOptions_Impl::ImplSetSymbolsStyle( bool bValue, sal_Int16 nSet, const ::rtl::OUString &rName )
513 {
514 if ( ( bValue && ( nSet != GetSymbolsStyle() ) ) ||
515 ( !bValue && ( rName != GetSymbolsStyleName() ) ) )
516 {
517 AllSettings aAllSettings = Application::GetSettings();
518 StyleSettings aStyleSettings = aAllSettings.GetStyleSettings();
519
520 if ( bValue )
521 aStyleSettings.SetSymbolsStyle( nSet );
522 else
523 aStyleSettings.SetSymbolsStyleName( rName );
524
525 aAllSettings.SetStyleSettings(aStyleSettings);
526 Application::MergeSystemSettings( aAllSettings );
527 Application::SetSettings(aAllSettings);
528
529 SetModified();
530 CallListeners();
531 }
532 }
533
SetPluginsEnabled(sal_Bool bEnable)534 void SvtMiscOptions_Impl::SetPluginsEnabled( sal_Bool bEnable )
535 {
536 m_bPluginsEnabled = bEnable;
537 SetModified();
538 CallListeners();
539 }
540
541 //*****************************************************************************************************************
542 // public method
543 //*****************************************************************************************************************
Notify(const Sequence<OUString> & rPropertyNames)544 void SvtMiscOptions_Impl::Notify( const Sequence< OUString >& rPropertyNames )
545 {
546 Load( rPropertyNames );
547 CallListeners();
548 }
549
550 //*****************************************************************************************************************
551 // public method
552 //*****************************************************************************************************************
Commit()553 void SvtMiscOptions_Impl::Commit()
554 {
555 // Get names of supported properties, create a list for values and copy current values to it.
556 Sequence< OUString > seqNames = GetPropertyNames ();
557 sal_Int32 nCount = seqNames.getLength();
558 Sequence< Any > seqValues ( nCount );
559 for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
560 {
561 switch( nProperty )
562 {
563 case PROPERTYHANDLE_PLUGINSENABLED :
564 {
565 if ( !m_bIsPluginsEnabledRO )
566 seqValues[nProperty] <<= m_bPluginsEnabled;
567 break;
568 }
569
570 case PROPERTYHANDLE_SYMBOLSET :
571 {
572 if ( !m_bIsSymbolsSizeRO )
573 seqValues[nProperty] <<= m_nSymbolsSize;
574 break;
575 }
576
577 case PROPERTYHANDLE_TOOLBOXSTYLE :
578 {
579 if ( !m_bIsToolboxStyleRO )
580 seqValues[nProperty] <<= m_nToolboxStyle;
581 break;
582 }
583
584 case PROPERTYHANDLE_USESYSTEMFILEDIALOG :
585 {
586 if ( !m_bIsUseSystemFileDialogRO )
587 seqValues[nProperty] <<= m_bUseSystemFileDialog;
588 break;
589 }
590
591 case PROPERTYHANDLE_SYMBOLSTYLE :
592 {
593 if ( !m_bIsSymbolsStyleRO )
594 seqValues[nProperty] <<= GetSymbolsStyleName();
595 break;
596 }
597
598 case PROPERTYHANDLE_USESYSTEMPRINTDIALOG :
599 {
600 if ( !m_bIsUseSystemPrintDialogRO )
601 seqValues[nProperty] <<= m_bUseSystemPrintDialog;
602 break;
603 }
604 }
605 }
606 // Set properties in configuration.
607 PutProperties( seqNames, seqValues );
608 }
609
610 //*****************************************************************************************************************
611 // private method
612 //*****************************************************************************************************************
GetPropertyNames()613 Sequence< OUString > SvtMiscOptions_Impl::GetPropertyNames()
614 {
615 // Build static list of configuration key names.
616 static const OUString pProperties[] =
617 {
618 PROPERTYNAME_PLUGINSENABLED,
619 PROPERTYNAME_SYMBOLSET,
620 PROPERTYNAME_TOOLBOXSTYLE,
621 PROPERTYNAME_USESYSTEMFILEDIALOG,
622 PROPERTYNAME_SYMBOLSTYLE,
623 PROPERTYNAME_USESYSTEMPRINTDIALOG
624 };
625
626 // Initialize return sequence with these list ...
627 static const Sequence< OUString > seqPropertyNames( pProperties, PROPERTYCOUNT );
628 // ... and return it.
629 return seqPropertyNames;
630 }
631
632 //*****************************************************************************************************************
633 // initialize static member
634 // DON'T DO IT IN YOUR HEADER!
635 // see definition for further informations
636 //*****************************************************************************************************************
637 SvtMiscOptions_Impl* SvtMiscOptions::m_pDataContainer = NULL ;
638 sal_Int32 SvtMiscOptions::m_nRefCount = 0 ;
639
640 //*****************************************************************************************************************
641 // constructor
642 //*****************************************************************************************************************
SvtMiscOptions()643 SvtMiscOptions::SvtMiscOptions()
644 {
645 // Global access, must be guarded (multithreading!).
646 MutexGuard aGuard( GetInitMutex() );
647 // Increase ouer refcount ...
648 ++m_nRefCount;
649 // ... and initialize ouer data container only if it not already exist!
650 if( m_pDataContainer == NULL )
651 {
652 RTL_LOGFILE_CONTEXT(aLog, "svtools ( ??? ) ::SvtMiscOptions_Impl::ctor()");
653 m_pDataContainer = new SvtMiscOptions_Impl;
654 ItemHolder2::holdConfigItem(E_MISCOPTIONS);
655 }
656 }
657
658 //*****************************************************************************************************************
659 // destructor
660 //*****************************************************************************************************************
~SvtMiscOptions()661 SvtMiscOptions::~SvtMiscOptions()
662 {
663 // Global access, must be guarded (multithreading!)
664 MutexGuard aGuard( GetInitMutex() );
665 // Decrease ouer refcount.
666 --m_nRefCount;
667 // If last instance was deleted ...
668 // we must destroy ouer static data container!
669 if( m_nRefCount <= 0 )
670 {
671 delete m_pDataContainer;
672 m_pDataContainer = NULL;
673 }
674 }
675
UseSystemFileDialog() const676 sal_Bool SvtMiscOptions::UseSystemFileDialog() const
677 {
678 return m_pDataContainer->UseSystemFileDialog();
679 }
680
SetUseSystemFileDialog(sal_Bool bEnable)681 void SvtMiscOptions::SetUseSystemFileDialog( sal_Bool bEnable )
682 {
683 m_pDataContainer->SetUseSystemFileDialog( bEnable );
684 }
685
IsUseSystemFileDialogReadOnly() const686 sal_Bool SvtMiscOptions::IsUseSystemFileDialogReadOnly() const
687 {
688 return m_pDataContainer->IsUseSystemFileDialogReadOnly();
689 }
690
IsPluginsEnabled() const691 sal_Bool SvtMiscOptions::IsPluginsEnabled() const
692 {
693 return m_pDataContainer->IsPluginsEnabled();
694 }
695
SetPluginsEnabled(sal_Bool bEnable)696 void SvtMiscOptions::SetPluginsEnabled( sal_Bool bEnable )
697 {
698 m_pDataContainer->SetPluginsEnabled( bEnable );
699 }
700
IsPluginsEnabledReadOnly() const701 sal_Bool SvtMiscOptions::IsPluginsEnabledReadOnly() const
702 {
703 return m_pDataContainer->IsPluginsEnabledReadOnly();
704 }
705
GetSymbolsSize() const706 sal_Int16 SvtMiscOptions::GetSymbolsSize() const
707 {
708 return m_pDataContainer->GetSymbolsSize();
709 }
710
SetSymbolsSize(sal_Int16 nSet)711 void SvtMiscOptions::SetSymbolsSize( sal_Int16 nSet )
712 {
713 m_pDataContainer->SetSymbolsSize( nSet );
714 }
715
GetCurrentSymbolsSize() const716 sal_Int16 SvtMiscOptions::GetCurrentSymbolsSize() const
717 {
718 sal_Int16 eOptSymbolsSize = m_pDataContainer->GetSymbolsSize();
719
720 if ( eOptSymbolsSize == SFX_SYMBOLS_SIZE_AUTO )
721 {
722 // Use system settings, we have to retrieve the toolbar icon size from the
723 // Application class
724 sal_uLong nStyleIconSize = Application::GetSettings().GetStyleSettings().GetToolbarIconSize();
725 if ( nStyleIconSize == STYLE_TOOLBAR_ICONSIZE_LARGE )
726 eOptSymbolsSize = SFX_SYMBOLS_SIZE_LARGE;
727 else
728 eOptSymbolsSize = SFX_SYMBOLS_SIZE_SMALL;
729 }
730
731 return eOptSymbolsSize;
732 }
733
AreCurrentSymbolsLarge() const734 bool SvtMiscOptions::AreCurrentSymbolsLarge() const
735 {
736 return ( GetCurrentSymbolsSize() == SFX_SYMBOLS_SIZE_LARGE );
737 }
738
IsGetSymbolsSizeReadOnly() const739 sal_Bool SvtMiscOptions::IsGetSymbolsSizeReadOnly() const
740 {
741 return m_pDataContainer->IsGetSymbolsSizeReadOnly();
742 }
743
GetSymbolsStyle() const744 sal_Int16 SvtMiscOptions::GetSymbolsStyle() const
745 {
746 return m_pDataContainer->GetSymbolsStyle();
747 }
748
GetCurrentSymbolsStyle() const749 sal_Int16 SvtMiscOptions::GetCurrentSymbolsStyle() const
750 {
751 return m_pDataContainer->GetCurrentSymbolsStyle();
752 }
753
GetCurrentSymbolsStyleName() const754 OUString SvtMiscOptions::GetCurrentSymbolsStyleName() const
755 {
756 return Application::GetSettings().GetStyleSettings().GetCurrentSymbolsStyleName();
757 }
758
SetSymbolsStyle(sal_Int16 nSet)759 void SvtMiscOptions::SetSymbolsStyle( sal_Int16 nSet )
760 {
761 m_pDataContainer->SetSymbolsStyle( nSet );
762 }
763
IsGetSymbolsStyleReadOnly() const764 sal_Bool SvtMiscOptions::IsGetSymbolsStyleReadOnly() const
765 {
766 return m_pDataContainer->IsGetSymbolsStyleReadOnly();
767 }
768
GetToolboxStyle() const769 sal_Int16 SvtMiscOptions::GetToolboxStyle() const
770 {
771 return m_pDataContainer->GetToolboxStyle();
772 }
773
SetToolboxStyle(sal_Int16 nStyle)774 void SvtMiscOptions::SetToolboxStyle( sal_Int16 nStyle )
775 {
776 m_pDataContainer->SetToolboxStyle( nStyle, true );
777 }
778
IsGetToolboxStyleReadOnly() const779 sal_Bool SvtMiscOptions::IsGetToolboxStyleReadOnly() const
780 {
781 return m_pDataContainer->IsGetToolboxStyleReadOnly();
782 }
783
UseSystemPrintDialog() const784 sal_Bool SvtMiscOptions::UseSystemPrintDialog() const
785 {
786 return m_pDataContainer->UseSystemPrintDialog();
787 }
788
SetUseSystemPrintDialog(sal_Bool bEnable)789 void SvtMiscOptions::SetUseSystemPrintDialog( sal_Bool bEnable )
790 {
791 m_pDataContainer->SetUseSystemPrintDialog( bEnable );
792 }
793
794 //*****************************************************************************************************************
795 // private method
796 //*****************************************************************************************************************
GetInitMutex()797 Mutex & SvtMiscOptions::GetInitMutex()
798 {
799 // Initialize static mutex only for one time!
800 static Mutex* pMutex = NULL;
801 // If these method first called (Mutex not already exist!) ...
802 if( pMutex == NULL )
803 {
804 // ... we must create a new one. Protect follow code with the global mutex -
805 // It must be - we create a static variable!
806 MutexGuard aGuard( Mutex::getGlobalMutex() );
807 // We must check our pointer again - because it can be that another instance of ouer class will be fastr then these!
808 if( pMutex == NULL )
809 {
810 // Create the new mutex and set it for return on static variable.
811 static Mutex aMutex;
812 pMutex = &aMutex;
813 }
814 }
815 // Return new created or already existing mutex object.
816 return *pMutex;
817 }
818
AddListenerLink(const Link & rLink)819 void SvtMiscOptions::AddListenerLink( const Link& rLink )
820 {
821 m_pDataContainer->AddListenerLink( rLink );
822 }
823
RemoveListenerLink(const Link & rLink)824 void SvtMiscOptions::RemoveListenerLink( const Link& rLink )
825 {
826 m_pDataContainer->RemoveListenerLink( rLink );
827 }
828