1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sw.hxx"
26
27 #include <hintids.hxx>
28 #include <svl/itemiter.hxx>
29 #include <svtools/imapobj.hxx>
30 #include <svtools/soerr.hxx>
31 #include <editeng/protitem.hxx>
32 #include <svx/svdogrp.hxx>
33 #include <svx/svdouno.hxx>
34 #include <svx/fmglob.hxx>
35 #include <com/sun/star/form/FormButtonType.hpp>
36 #include <com/sun/star/beans/XPropertySet.hpp>
37 #include <fmtanchr.hxx>
38 #include <txtflcnt.hxx>
39 #include <fmtcntnt.hxx>
40 #include <fmtornt.hxx>
41 #include <fmtflcnt.hxx>
42 #include <fmturl.hxx>
43 #include <fmtclds.hxx>
44 #include <fmtfsize.hxx>
45 #include <docary.hxx>
46 #include <fesh.hxx>
47 #include <rootfrm.hxx>
48 #include <pagefrm.hxx>
49 #include <cntfrm.hxx>
50 #include <txtfrm.hxx>
51 #include <viewimp.hxx>
52 #include <viscrs.hxx>
53 #include <doc.hxx>
54 #include <IDocumentUndoRedo.hxx>
55 #include <dview.hxx>
56 #include <dflyobj.hxx>
57 #include <dcontact.hxx>
58 #include <frmfmt.hxx>
59 #include <flyfrm.hxx>
60 #include <ndtxt.hxx>
61 #include <edimp.hxx>
62 #include <swtable.hxx>
63 #include <mvsave.hxx> // Strukturen zum Sichern beim Move/Delete
64 #include <ndgrf.hxx>
65 #include <flyfrms.hxx>
66 #include <flypos.hxx>
67 #include <fldbas.hxx>
68 #include <fmtfld.hxx>
69 #include <swundo.hxx>
70 #include <frame.hxx>
71 #include <notxtfrm.hxx>
72 // --> OD 2006-03-06 #125892#
73 #include <HandleAnchorNodeChg.hxx>
74 // <--
75 #include <frmatr.hxx>
76 // --> 3.7.2010 #i972#
77 #include <ndole.hxx>
78 // <--
79 // --> OD 2009-12-29 #i89920#
80 #include <fmtsrnd.hxx>
81 #include <editeng/opaqitem.hxx>
82 // <--
83
84 using ::rtl::OUString;
85 using namespace ::com::sun::star;
86
87 //Zum anmelden von Flys in Flys in ...
88 //definiert in layout/frmtool.cxx
89 void RegistFlys( SwPageFrm*, const SwLayoutFrm* );
90
91 /***********************************************************************
92 #* Class : SwDoc
93 #* Methode : UseSpzLayoutFmt
94 #* Beschreibung: Anhand des Request werden zu dem Format entsprechende
95 #* Aenderungen an den Spezifischen Layouts vorgenommen.
96 #* Datum : MA 23. Sep. 92
97 #* Update : JP 09.03.98
98 #***********************************************************************/
99
lcl_SetNewFlyPos(const SwNode & rNode,SwFmtAnchor & rAnchor,const Point & rPt)100 sal_Bool lcl_SetNewFlyPos( const SwNode& rNode, SwFmtAnchor& rAnchor,
101 const Point& rPt )
102 {
103 sal_Bool bRet = sal_False;
104 const SwStartNode* pStNode = rNode.FindFlyStartNode();
105 if( pStNode )
106 {
107 SwPosition aPos( *pStNode );
108 rAnchor.SetAnchor( &aPos );
109 bRet = sal_True;
110 }
111 else
112 {
113 const SwCntntNode *pCntNd = rNode.GetCntntNode();
114 const SwCntntFrm* pCFrm = pCntNd ? pCntNd->getLayoutFrm( pCntNd->GetDoc()->GetCurrentLayout(), &rPt, 0, sal_False ) : 0;
115 const SwPageFrm *pPg = pCFrm ? pCFrm->FindPageFrm() : 0;
116
117 rAnchor.SetPageNum( pPg ? pPg->GetPhyPageNum() : 1 );
118 rAnchor.SetType( FLY_AT_PAGE );
119 }
120 return bRet;
121 }
122
lcl_FindAnchorPos(SwEditShell & rEditShell,SwDoc & rDoc,const Point & rPt,const SwFrm & rFrm,SfxItemSet & rSet)123 sal_Bool lcl_FindAnchorPos(
124 SwEditShell& rEditShell,
125 SwDoc& rDoc,
126 const Point& rPt,
127 const SwFrm& rFrm,
128 SfxItemSet& rSet )
129 {
130 sal_Bool bRet = sal_True;
131 SwFmtAnchor aNewAnch( (SwFmtAnchor&)rSet.Get( RES_ANCHOR ) );
132 RndStdIds nNew = aNewAnch.GetAnchorId();
133 const SwFrm *pNewAnch;
134
135 //Neuen Anker ermitteln
136 Point aTmpPnt( rPt );
137 switch( nNew )
138 {
139 case FLY_AS_CHAR: // sollte der nicht auch mit hinein?
140 case FLY_AT_PARA:
141 case FLY_AT_CHAR: // LAYER_IMPL
142 {
143 //Ausgehend von der linken oberen Ecke des Fly den
144 //dichtesten CntntFrm suchen.
145 const SwFrm* pFrm = rFrm.IsFlyFrm() ? ((SwFlyFrm&)rFrm).GetAnchorFrm()
146 : &rFrm;
147 pNewAnch = ::FindAnchor( pFrm, aTmpPnt );
148 if( pNewAnch->IsProtected() )
149 {
150 bRet = sal_False;
151 break;
152 }
153
154 SwPosition aPos( *((SwCntntFrm*)pNewAnch)->GetNode() );
155 if ((FLY_AT_CHAR == nNew) || (FLY_AS_CHAR == nNew))
156 {
157 // es muss ein TextNode gefunden werden, denn nur in diesen
158 // ist ein Inhaltsgebundene Frames zu verankern
159 SwCrsrMoveState aState( MV_SETONLYTEXT );
160 aTmpPnt.X() -= 1; //nicht im Fly landen!!
161 if( !pNewAnch->GetCrsrOfst( &aPos, aTmpPnt, &aState ) )
162 {
163 SwCntntNode* pCNd = ((SwCntntFrm*)pNewAnch)->GetNode();
164 if( pNewAnch->Frm().Bottom() < aTmpPnt.Y() )
165 pCNd->MakeStartIndex( &aPos.nContent );
166 else
167 pCNd->MakeEndIndex( &aPos.nContent );
168 }
169 else
170 {
171 if ( rEditShell.PosInsideInputFld( aPos ) )
172 {
173 aPos.nContent = rEditShell.StartOfInputFldAtPos( aPos );
174 }
175 }
176 }
177 aNewAnch.SetAnchor( &aPos );
178 }
179 break;
180
181 case FLY_AT_FLY: // LAYER_IMPL
182 {
183 //Ausgehend von der linken oberen Ecke des Fly den
184 //dichtesten SwFlyFrm suchen.
185 SwCrsrMoveState aState( MV_SETONLYTEXT );
186 SwPosition aPos( rDoc.GetNodes() );
187 aTmpPnt.X() -= 1; //nicht im Fly landen!!
188 rDoc.GetCurrentLayout()->GetCrsrOfst( &aPos, aTmpPnt, &aState ); //swmod 071108//swmod 071225
189 pNewAnch = ::FindAnchor(
190 aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( rFrm.getRootFrm(), 0, 0, sal_False ),
191 aTmpPnt )->FindFlyFrm();
192
193 if( pNewAnch && &rFrm != pNewAnch && !pNewAnch->IsProtected() )
194 {
195 aPos.nNode = *((SwFlyFrm*)pNewAnch)->GetFmt()->GetCntnt().
196 GetCntntIdx();
197 aNewAnch.SetAnchor( &aPos );
198 break;
199 }
200 }
201
202 aNewAnch.SetType( nNew = FLY_AT_PAGE );
203 // no break
204
205 case FLY_AT_PAGE:
206 pNewAnch = rFrm.FindPageFrm();
207 aNewAnch.SetPageNum( pNewAnch->GetPhyPageNum() );
208 break;
209
210 default:
211 ASSERT( !&rDoc, "Falsche ID fuer neuen Anker." );
212 }
213
214 rSet.Put( aNewAnch );
215 return bRet;
216 }
217
218 //
219 //! also used in unoframe.cxx
220 //
lcl_ChkAndSetNewAnchor(SwEditShell & rEditShell,const SwFlyFrm & rFly,SfxItemSet & rSet)221 sal_Bool lcl_ChkAndSetNewAnchor(
222 SwEditShell& rEditShell,
223 const SwFlyFrm& rFly,
224 SfxItemSet& rSet )
225 {
226 const SwFrmFmt& rFmt = *rFly.GetFmt();
227 const SwFmtAnchor &rOldAnch = rFmt.GetAnchor();
228 const RndStdIds nOld = rOldAnch.GetAnchorId();
229
230 RndStdIds nNew = ((SwFmtAnchor&)rSet.Get( RES_ANCHOR )).GetAnchorId();
231
232 if( nOld == nNew )
233 return sal_False;
234
235 SwDoc* pDoc = (SwDoc*)rFmt.GetDoc();
236
237 #ifdef DBG_UTIL
238 ASSERT( !(nNew == FLY_AT_PAGE &&
239 (FLY_AT_PARA==nOld || FLY_AT_CHAR==nOld || FLY_AS_CHAR==nOld ) &&
240 pDoc->IsInHeaderFooter( rOldAnch.GetCntntAnchor()->nNode )),
241 "Unerlaubter Ankerwechsel in Head/Foot." );
242 #endif
243
244 return ::lcl_FindAnchorPos( rEditShell, *pDoc, rFly.Frm().Pos(), rFly, rSet );
245 }
246
SelectFlyFrm(SwFlyFrm & rFrm,sal_Bool bNew)247 void SwFEShell::SelectFlyFrm( SwFlyFrm& rFrm, sal_Bool bNew )
248 {
249 SET_CURR_SHELL( this );
250
251 // Wenn es ein neuer Rahmen ist, so soll er selektiert sein.
252 // !!Rahmen immer selektieren, wenn sie nicht selektiert sind.
253 // - Es kann ein neuer 'alter' sein weil der Anker gewechselt wurde.
254 // - 'alte' Rahmen sind vorher immer selektiert denn sonst wird nix
255 // an ihnen veraendert.
256 // Der Rahmen darf nicht per Dokumentposition selektiert werden, weil er
257 // auf jedenfall selektiert sein muss!
258 SwViewImp *pImpl = Imp();
259 if( GetWin() && (bNew || !pImpl->GetDrawView()->AreObjectsMarked()) )
260 {
261 ASSERT( rFrm.IsFlyFrm(), "SelectFlyFrm will einen Fly" );
262
263 //Wenn der Fly bereits selektiert ist gibt es hier ja wohl nichts
264 //zu tun.
265 if ( FindFlyFrm() == &rFrm )
266 return;
267
268 //Damit der Anker ueberhaupt noch gepaintet wird.
269 if( rFrm.IsFlyInCntFrm() && rFrm.GetAnchorFrm() )
270 rFrm.GetAnchorFrm()->SetCompletePaint();
271
272 // --> OD 2004-06-11 #i28701# - no format at all.
273 // //Hier wurde immer kalkuliert. Leider ist der Sonderfall Fly in Fly mit
274 // //Spalten u.U. sehr kritisch wenn der innenliegende zuerst formatiert
275 // //wird. Um kein Risiko einzugehen entschaerfen wir nur diesen Sonderfall.
276 // if( !rFrm.GetAnchorFrm()->IsInFly() )
277 // rFrm.Calc();
278
279 if( pImpl->GetDrawView()->AreObjectsMarked() )
280 pImpl->GetDrawView()->UnmarkAll();
281
282 pImpl->GetDrawView()->MarkObj( rFrm.GetVirtDrawObj(),
283 pImpl->GetPageView(), sal_False, sal_False );
284 KillPams();
285 ClearMark();
286 SelFlyGrabCrsr();
287 }
288 }
289
290 /*************************************************************************
291 |*
292 |* SwFEShell::FindFlyFrm()
293 |*
294 |* Beschreibung Liefert den Fly wenn einer Selektiert ist.
295 |* Ersterstellung MA 03. Nov. 92
296 |* Letzte Aenderung MA 05. Mar. 96
297 |*
298 *************************************************************************/
299
FindFlyFrm() const300 SwFlyFrm *SwFEShell::FindFlyFrm() const
301 {
302 if ( Imp()->HasDrawView() )
303 {
304 // Ein Fly ist genau dann erreichbar, wenn er selektiert ist.
305 const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
306 if( rMrkList.GetMarkCount() != 1 )
307 return 0;
308
309 SdrObject *pO = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
310 return ( pO && pO->ISA(SwVirtFlyDrawObj) ) ? ((SwVirtFlyDrawObj*)pO)->GetFlyFrm() : 0;
311 }
312 return 0;
313 }
314
315 /*************************************************************************
316 |*
317 |* SwFEShell::IsFlyInFly()
318 |*
319 |* Beschreibung Liefert sal_True, wenn der aktuelle Fly an einem anderen
320 |* verankert werden koennte (also innerhalb ist)
321 |* Ersterstellung AMA 11. Sep. 97
322 |* Letzte Aenderung AMA 14. Jan. 98
323 |*
324 *************************************************************************/
325
IsFlyInFly()326 const SwFrmFmt* SwFEShell::IsFlyInFly()
327 {
328 SET_CURR_SHELL( this );
329
330 if ( !Imp()->HasDrawView() )
331 return NULL;
332
333 const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
334 if ( !rMrkList.GetMarkCount() )
335 {
336 SwCntntFrm *pCntnt = GetCurrFrm( sal_False );
337 if( !pCntnt )
338 return NULL;
339 SwFlyFrm *pFly = pCntnt->FindFlyFrm();
340 if ( !pFly )
341 return NULL;
342 return pFly->GetFmt();
343 }
344 else if ( rMrkList.GetMarkCount() != 1 ||
345 !GetUserCall(rMrkList.GetMark( 0 )->GetMarkedSdrObj()) )
346 return NULL;
347
348 SdrObject *pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
349
350 SwFrmFmt *pFmt = FindFrmFmt( pObj );
351 if( pFmt && FLY_AT_FLY == pFmt->GetAnchor().GetAnchorId() )
352 {
353 const SwFrm* pFly = pObj->ISA(SwVirtFlyDrawObj) ?
354 ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm()->GetAnchorFrm() :
355 ((SwDrawContact*)GetUserCall(pObj))->GetAnchorFrm( pObj );
356 ASSERT( pFly, "IsFlyInFly: Where's my anchor?" );
357 ASSERT( pFly->IsFlyFrm(), "IsFlyInFly: Funny anchor!" );
358 return ((SwFlyFrm*)pFly)->GetFmt();
359 }
360
361 Point aTmpPos = pObj->GetCurrentBoundRect().TopLeft();
362
363 SwFrm *pTxtFrm;
364 {
365 SwCrsrMoveState aState( MV_SETONLYTEXT );
366 SwNodeIndex aSwNodeIndex( GetDoc()->GetNodes() );
367 SwPosition aPos( aSwNodeIndex );
368 Point aPoint( aTmpPos );
369 aPoint.X() -= 1; //nicht im Fly landen!!
370 GetLayout()->GetCrsrOfst( &aPos, aPoint, &aState );
371 // OD 01.07.2003 #108784# - determine text frame by left-top-corner
372 // of object
373 //pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->GetFrm( 0, 0, sal_False );
374 pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( GetLayout(), &aTmpPos, 0, sal_False );
375 }
376 const SwFrm *pTmp = ::FindAnchor( pTxtFrm, aTmpPos );
377 const SwFlyFrm *pFly = pTmp->FindFlyFrm();
378 if( pFly )
379 return pFly->GetFmt();
380 return NULL;
381 }
382
383 /*************************************************************************
384 |*
385 |* SwFEShell::SetFlyPos
386 |*
387 |* Ersterstellung MA 14. Jan. 93
388 |* Letzte Aenderung MA 14. Feb. 95
389 |*
390 *************************************************************************/
391
SetFlyPos(const Point & rAbsPos)392 void SwFEShell::SetFlyPos( const Point& rAbsPos )
393 {
394 SET_CURR_SHELL( this );
395
396 //Bezugspunkt in Dokumentkoordinaten bestimmen
397 SwCntntFrm *pCntnt = GetCurrFrm( sal_False );
398 if( !pCntnt )
399 return;
400 SwFlyFrm *pFly = pCntnt->FindFlyFrm();
401 if ( !pFly )
402 return;
403
404 //SwSaveHdl aSaveX( Imp() );
405
406 //Bei Absatzgebundenen Flys muss ausgehend von der absoluten
407 //Position ein neuer Anker gesetzt werden. Anker und neue RelPos werden
408 //vom Fly selbst berechnet und gesetzt.
409 if ( pFly->IsFlyAtCntFrm() )
410 ((SwFlyAtCntFrm*)pFly)->SetAbsPos( rAbsPos );
411 else
412 {
413 const SwFrm *pAnch = pFly->GetAnchorFrm();
414 // --> OD 2004-06-11 #i28701# - no format here
415 // pAnch->Calc();
416 Point aOrient( pAnch->Frm().Pos() );
417
418 if ( pFly->IsFlyInCntFrm() )
419 aOrient.X() = rAbsPos.X();
420
421 //RelPos errechnen.
422 aOrient.X() = rAbsPos.X() - aOrient.X();
423 aOrient.Y() = rAbsPos.Y() - aOrient.Y();
424 pFly->ChgRelPos( aOrient );
425 }
426 // --> OD 2004-06-11 #i28701# - no format here
427 // pFly->Calc();
428 CallChgLnk(); // rufe das AttrChangeNotify auf der UI-Seite.
429 }
430
431 /*************************************************************************
432 |*
433 |* SwFEShell::FindAnchorPos
434 |*
435 |* Ersterstellung AMA 24. Sep. 97
436 |* Letzte Aenderung AMA 24. Sep. 97
437 |*
438 *************************************************************************/
439
FindAnchorPos(const Point & rAbsPos,sal_Bool bMoveIt)440 Point SwFEShell::FindAnchorPos( const Point& rAbsPos, sal_Bool bMoveIt )
441 {
442 Point aRet;
443
444 SET_CURR_SHELL( this );
445
446 if ( !Imp()->HasDrawView() )
447 return aRet;
448
449 const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
450 if ( rMrkList.GetMarkCount() != 1 ||
451 !GetUserCall(rMrkList.GetMark( 0 )->GetMarkedSdrObj()) )
452 return aRet;
453
454 SdrObject* pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
455 // --> OD 2004-07-16 #i28701#
456 SwAnchoredObject* pAnchoredObj = ::GetUserCall( pObj )->GetAnchoredObj( pObj );
457 SwFrmFmt& rFmt = pAnchoredObj->GetFrmFmt();
458 const RndStdIds nAnchorId = rFmt.GetAnchor().GetAnchorId();
459
460 if ( FLY_AS_CHAR == nAnchorId )
461 return aRet;
462
463 sal_Bool bFlyFrame = pObj->ISA(SwVirtFlyDrawObj);
464
465 SwFlyFrm* pFly = 0L;
466 const SwFrm* pOldAnch;
467 const SwFrm* pFooterOrHeader = NULL;
468
469 if( bFlyFrame )
470 {
471 //Bezugspunkt in Dokumentkoordinaten bestimmen
472 SwCntntFrm *pCntnt = GetCurrFrm( sal_False );
473 if( !pCntnt )
474 return aRet;
475 pFly = pCntnt->FindFlyFrm();
476 if ( !pFly )
477 return aRet;
478 pOldAnch = pFly->GetAnchorFrm();
479 if( !pOldAnch )
480 return aRet;
481 if ( FLY_AT_PAGE != nAnchorId )
482 {
483 pFooterOrHeader = pCntnt->FindFooterOrHeader();
484 }
485 }
486 // OD 26.06.2003 #108784# - set <pFooterOrHeader> also for drawing
487 // objects, but not for control objects.
488 // Necessary for moving 'anchor symbol' at the user interface inside header/footer.
489 else if ( !::CheckControlLayer( pObj ) )
490 {
491 SwCntntFrm *pCntnt = GetCurrFrm( sal_False );
492 if( !pCntnt )
493 return aRet;
494 pFooterOrHeader = pCntnt->FindFooterOrHeader();
495 }
496
497 SwCntntFrm *pTxtFrm = NULL;
498 {
499 SwCrsrMoveState aState( MV_SETONLYTEXT );
500 SwPosition aPos( GetDoc()->GetNodes().GetEndOfExtras() );
501 Point aTmpPnt( rAbsPos );
502 GetLayout()->GetCrsrOfst( &aPos, aTmpPnt, &aState );
503 if ( nAnchorId != FLY_AT_CHAR
504 || !PosInsideInputFld( aPos ) )
505 {
506 pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( GetLayout(),0,&aPos,sal_False );
507 }
508 }
509 const SwFrm *pNewAnch = NULL;
510 if( pTxtFrm != NULL )
511 {
512 if ( FLY_AT_PAGE == nAnchorId )
513 {
514 pNewAnch = pTxtFrm->FindPageFrm();
515 }
516 else
517 {
518 pNewAnch = ::FindAnchor( pTxtFrm, rAbsPos );
519
520 if( FLY_AT_FLY == nAnchorId ) // LAYER_IMPL
521 {
522 pNewAnch = pNewAnch->FindFlyFrm();
523 }
524 }
525 }
526
527 if( pNewAnch && !pNewAnch->IsProtected() )
528 {
529 const SwFlyFrm* pCheck = bFlyFrame ? pNewAnch->FindFlyFrm() : 0;
530 // Falls wir innerhalb eines Rahmens landen, muss sichergestellt werden,
531 // dass der Rahmen nicht in seinem eigenen Inhalt landet!
532 while( pCheck )
533 {
534 if( pCheck == pFly )
535 break;
536 const SwFrm *pTmp = pCheck->GetAnchorFrm();
537 pCheck = pTmp ? pTmp->FindFlyFrm() : NULL;
538 }
539 // Es darf nicht aus einer Kopf-/Fusszeile in einen anderen Bereich
540 // gewechselt werden, es darf nicht in eine Kopf-/Fusszeile hinein-
541 // gewechselt werden.
542 if( !pCheck &&
543 pFooterOrHeader == pNewAnch->FindFooterOrHeader() )
544 {
545 aRet = pNewAnch->GetFrmAnchorPos( ::HasWrap( pObj ) );
546
547 if ( bMoveIt || (nAnchorId == FLY_AT_CHAR) )
548 {
549 SwFmtAnchor aAnch( rFmt.GetAnchor() );
550 switch ( nAnchorId )
551 {
552 case FLY_AT_PARA:
553 {
554 SwPosition *pPos = (SwPosition*)aAnch.GetCntntAnchor();
555 pPos->nNode = *pTxtFrm->GetNode();
556 pPos->nContent.Assign(0,0);
557 break;
558 }
559 case FLY_AT_PAGE:
560 {
561 aAnch.SetPageNum( ((const SwPageFrm*)pNewAnch)->
562 GetPhyPageNum() );
563 break;
564 }
565
566 case FLY_AT_FLY:
567 {
568 SwPosition aPos( *((SwFlyFrm*)pNewAnch)->GetFmt()->
569 GetCntnt().GetCntntIdx() );
570 aAnch.SetAnchor( &aPos );
571 break;
572 }
573
574 case FLY_AT_CHAR:
575 {
576 SwPosition *pPos = (SwPosition*)aAnch.GetCntntAnchor();
577 Point aTmpPnt( rAbsPos );
578 if( pTxtFrm->GetCrsrOfst( pPos, aTmpPnt, NULL ) )
579 {
580 SwRect aTmpRect;
581 pTxtFrm->GetCharRect( aTmpRect, *pPos );
582 aRet = aTmpRect.Pos();
583 }
584 else
585 {
586 pPos->nNode = *pTxtFrm->GetNode();
587 pPos->nContent.Assign(0,0);
588 }
589 break;
590 }
591 default:
592 break;
593
594 }
595
596 if( bMoveIt )
597 {
598 StartAllAction();
599 // --> OD 2006-02-28 #125892#
600 // handle change of anchor node:
601 // if count of the anchor frame also change, the fly frames have to be
602 // re-created. Thus, delete all fly frames except the <this> before the
603 // anchor attribute is change and re-create them afterwards.
604 {
605 SwHandleAnchorNodeChg* pHandleAnchorNodeChg( 0L );
606 SwFlyFrmFmt* pFlyFrmFmt( dynamic_cast<SwFlyFrmFmt*>(&rFmt) );
607 if ( pFlyFrmFmt )
608 {
609 pHandleAnchorNodeChg =
610 new SwHandleAnchorNodeChg( *pFlyFrmFmt, aAnch );
611 }
612 rFmt.GetDoc()->SetAttr( aAnch, rFmt );
613 delete pHandleAnchorNodeChg;
614 }
615 // <--
616 // --> OD 2004-06-24 #i28701# - no call of method
617 // <CheckCharRectAndTopOfLine()> for to-character anchored
618 // Writer fly frame needed. This method call can cause a
619 // format of the anchor frame, which is no longer intended.
620 // Instead clear the anchor character rectangle and
621 // the top of line values for all to-character anchored objects.
622 pAnchoredObj->ClearCharRectAndTopOfLine();
623 // <--
624 EndAllAction();
625 }
626 }
627
628 SwRect aTmpRect( aRet, rAbsPos );
629 if( aTmpRect.HasArea() )
630 MakeVisible( aTmpRect );
631 #ifdef DBG_UTIL
632 //TODO: That doesn't seem to be intended
633 if( Color(COL_TRANSPARENT) != GetOut()->GetLineColor() )
634 {
635 ASSERT( sal_False, "Hey, Joe: Where's my Null Pen?" );
636 GetOut()->SetLineColor( Color(COL_TRANSPARENT) );
637 }
638 #endif
639 }
640 }
641
642 return aRet;
643 }
644
645 /***********************************************************************
646 #* Class : SwFEShell
647 #* Methode : NewFlyFrm
648 #* Beschreibung:
649 #* Datum : MA 03. Nov. 92
650 #* Update : JP 11. Aug. 93
651 #***********************************************************************/
652
NewFlyFrm(const SfxItemSet & rSet,sal_Bool bAnchValid,SwFrmFmt * pParent)653 const SwFrmFmt *SwFEShell::NewFlyFrm( const SfxItemSet& rSet, sal_Bool bAnchValid,
654 SwFrmFmt *pParent )
655 {
656 SET_CURR_SHELL( this );
657 StartAllAction();
658
659 SwPaM* pCrsr = GetCrsr();
660 const Point aPt( GetCrsrDocPos() );
661
662 SwSelBoxes aBoxes;
663 sal_Bool bMoveCntnt = sal_True;
664 if( IsTableMode() )
665 {
666 GetTblSel( *this, aBoxes );
667 if( aBoxes.Count() )
668 {
669 // die Crsr muessen noch aus dem Loeschbereich entfernt
670 // werden. Setze sie immer hinter/auf die Tabelle; ueber die
671 // Dokument-Position werden sie dann immer an die alte
672 // Position gesetzt.
673 ParkCrsr( SwNodeIndex( *aBoxes[0]->GetSttNd() ));
674
675 // --> FME 2005-12-01 #i127787# pCurCrsr will be deleted in ParkCrsr,
676 // we better get the current pCurCrsr instead of working with the
677 // deleted one:
678 pCrsr = GetCrsr();
679 // <--
680
681 // KillPams();
682 }
683 else
684 bMoveCntnt = sal_False;
685 }
686 else if( !pCrsr->HasMark() && pCrsr->GetNext() == pCrsr )
687 bMoveCntnt = sal_False;
688
689 const SwPosition& rPos = *pCrsr->Start();
690
691 SwFmtAnchor& rAnch = (SwFmtAnchor&)rSet.Get( RES_ANCHOR );
692 RndStdIds eRndId = rAnch.GetAnchorId();
693 switch( eRndId )
694 {
695 case FLY_AT_PAGE:
696 if( !rAnch.GetPageNum() ) //HotFix: Bug in UpdateByExample
697 rAnch.SetPageNum( 1 );
698 break;
699
700 case FLY_AT_FLY:
701 case FLY_AT_PARA:
702 case FLY_AT_CHAR:
703 case FLY_AS_CHAR:
704 if( !bAnchValid )
705 {
706 if( FLY_AT_FLY != eRndId )
707 {
708 rAnch.SetAnchor( &rPos );
709 }
710 else if( lcl_SetNewFlyPos( rPos.nNode.GetNode(), rAnch, aPt ) )
711 {
712 eRndId = FLY_AT_PAGE;
713 }
714 }
715 break;
716
717 default:
718 ASSERT( !this, "Was sollte das fuer ein Fly werden?" )
719 break;
720 }
721
722 SwFlyFrmFmt *pRet;
723 if( bMoveCntnt )
724 {
725 GetDoc()->GetIDocumentUndoRedo().StartUndo( UNDO_INSLAYFMT, NULL );
726 SwFmtAnchor* pOldAnchor = 0;
727 sal_Bool bHOriChgd = sal_False, bVOriChgd = sal_False;
728 SwFmtVertOrient aOldV;
729 SwFmtHoriOrient aOldH;
730
731 if ( FLY_AT_PAGE != eRndId )
732 {
733 // erstmal als mit Seitenbindung, Absatz/Zeichenbindung erst wenn
734 // alles verschoben ist. Dann ist die Position gueltig!
735 // JP 13.05.98: ggfs. auch noch die Hori/Vert-Orientierung
736 // umsetzen, damit diese beim Umanker NICHT
737 // korrigiert wird
738 pOldAnchor = new SwFmtAnchor( rAnch );
739 const_cast<SfxItemSet&>(rSet).Put( SwFmtAnchor( FLY_AT_PAGE, 1 ) );
740
741 const SfxPoolItem* pItem;
742 if( SFX_ITEM_SET == rSet.GetItemState( RES_HORI_ORIENT, sal_False, &pItem )
743 && text::HoriOrientation::NONE == ((SwFmtHoriOrient*)pItem)->GetHoriOrient() )
744 {
745 bHOriChgd = sal_True;
746 aOldH = *((SwFmtHoriOrient*)pItem);
747 ((SfxItemSet&)rSet).Put( SwFmtHoriOrient( 0, text::HoriOrientation::LEFT ) );
748 }
749 if( SFX_ITEM_SET == rSet.GetItemState( RES_VERT_ORIENT, sal_False, &pItem )
750 && text::VertOrientation::NONE == ((SwFmtVertOrient*)pItem)->GetVertOrient() )
751 {
752 bVOriChgd = sal_True;
753 aOldV = *((SwFmtVertOrient*)pItem);
754 ((SfxItemSet&)rSet).Put( SwFmtVertOrient( 0, text::VertOrientation::TOP ) );
755 }
756 }
757
758 pRet = GetDoc()->MakeFlyAndMove( *pCrsr, rSet, &aBoxes, pParent );
759
760 KillPams();
761
762 if( pOldAnchor )
763 {
764 if( pRet )
765 {
766 // neue Position bestimmen
767 //JP 24.03.97: immer ueber die Seitenbindung gehen - der
768 // chaos::Anchor darf nie im verschobenen Bereich
769 // liegen
770 pRet->DelFrms();
771
772 const SwFrm* pAnch = ::FindAnchor( GetLayout(), aPt, sal_False );
773 SwPosition aPos( *((SwCntntFrm*)pAnch)->GetNode() );
774 if ( FLY_AS_CHAR == eRndId )
775 {
776 aPos.nContent.Assign( ((SwCntntFrm*)pAnch)->GetNode(), 0 );
777 }
778 pOldAnchor->SetAnchor( &aPos );
779
780 // das verschieben von TabelleSelektion ist noch nicht
781 // Undofaehig - also darf das UmAnkern auch nicht
782 // aufgezeichnet werden.
783 bool const bDoesUndo =
784 GetDoc()->GetIDocumentUndoRedo().DoesUndo();
785 SwUndoId nLastUndoId(UNDO_EMPTY);
786 if (bDoesUndo &&
787 GetDoc()->GetIDocumentUndoRedo().GetLastUndoInfo(0,
788 & nLastUndoId))
789 {
790 if (UNDO_INSLAYFMT == nLastUndoId)
791 {
792 GetDoc()->GetIDocumentUndoRedo().DoUndo(false);
793 }
794 }
795
796 ((SfxItemSet&)rSet).Put( *pOldAnchor );
797
798 if( bHOriChgd )
799 ((SfxItemSet&)rSet).Put( aOldH );
800 if( bVOriChgd )
801 ((SfxItemSet&)rSet).Put( aOldV );
802
803 GetDoc()->SetFlyFrmAttr( *pRet, (SfxItemSet&)rSet );
804 GetDoc()->GetIDocumentUndoRedo().DoUndo(bDoesUndo);
805 }
806 delete pOldAnchor;
807 }
808 GetDoc()->GetIDocumentUndoRedo().EndUndo( UNDO_INSLAYFMT, NULL );
809 }
810 else
811 /* #109161# If called from a shell try to propagate an
812 existing adjust item from rPos to the content node of the
813 new frame. */
814 pRet = GetDoc()->MakeFlySection( eRndId, &rPos, &rSet, pParent, sal_True );
815
816 if( pRet )
817 {
818 SwFlyFrm* pFrm = pRet->GetFrm( &aPt );
819 if( pFrm )
820 SelectFlyFrm( *pFrm, sal_True );
821 else
822 {
823 GetLayout()->SetAssertFlyPages();
824 pRet = 0;
825 }
826 }
827 EndAllActionAndCall();
828
829 return pRet;
830 }
831
832 /***********************************************************************
833 #* Class : SwFEShell
834 #* Methode : Insert
835 #* Datum : ??
836 #* Update : MA 12. Sep. 94
837 #***********************************************************************/
838
Insert(const String & rGrfName,const String & rFltName,const Graphic * pGraphic,const SfxItemSet * pFlyAttrSet,const SfxItemSet * pGrfAttrSet,SwFrmFmt * pFrmFmt)839 void SwFEShell::Insert( const String& rGrfName, const String& rFltName,
840 const Graphic* pGraphic,
841 const SfxItemSet* pFlyAttrSet,
842 const SfxItemSet* pGrfAttrSet,
843 SwFrmFmt* pFrmFmt )
844 {
845 SwFlyFrmFmt* pFmt = 0;
846 SET_CURR_SHELL( this );
847 StartAllAction();
848 SwShellCrsr *pStartCursor = dynamic_cast<SwShellCrsr*>(this->GetSwCrsr());
849 SwShellCrsr *pCursor = pStartCursor;
850 do {
851
852 // Anker noch nicht oder unvollstaendig gesetzt ?
853 if( pFlyAttrSet )
854 {
855 const SfxPoolItem* pItem;
856 if( SFX_ITEM_SET == pFlyAttrSet->GetItemState( RES_ANCHOR, sal_False,
857 &pItem ) )
858 {
859 SwFmtAnchor* pAnchor = (SwFmtAnchor*)pItem;
860 switch( pAnchor->GetAnchorId())
861 {
862 case FLY_AT_PARA:
863 case FLY_AT_CHAR: // LAYER_IMPL
864 case FLY_AS_CHAR:
865 if( !pAnchor->GetCntntAnchor() )
866 {
867 pAnchor->SetAnchor( pCursor->GetPoint() );
868 }
869 break;
870 case FLY_AT_FLY:
871 if( !pAnchor->GetCntntAnchor() )
872 {
873 lcl_SetNewFlyPos( *pCursor->GetNode(),
874 *pAnchor, GetCrsrDocPos() );
875 }
876 break;
877 case FLY_AT_PAGE:
878 if( !pAnchor->GetPageNum() )
879 {
880 pAnchor->SetPageNum( pCursor->GetPageNum(
881 sal_True, &pCursor->GetPtPos() ) );
882 }
883 break;
884 default :
885 break;
886 }
887 }
888 }
889 pFmt = GetDoc()->Insert(*pCursor, rGrfName,
890 rFltName, pGraphic,
891 pFlyAttrSet,
892 pGrfAttrSet, pFrmFmt );
893 ASSERT( pFmt, "Doc->Insert(notxt) failed." );
894
895 } while( (pCursor = dynamic_cast<SwShellCrsr*>(pCursor->GetNext()))
896 != pStartCursor );
897
898 EndAllAction();
899
900 if( pFmt )
901 {
902 const Point aPt( GetCrsrDocPos() );
903 SwFlyFrm* pFrm = pFmt->GetFrm( &aPt );
904
905 if( pFrm )
906 SelectFlyFrm( *pFrm, sal_True );
907 else
908 GetLayout()->SetAssertFlyPages();
909 }
910 }
911
InsertObject(const svt::EmbeddedObjectRef & xObj,const SfxItemSet * pFlyAttrSet,const SfxItemSet * pGrfAttrSet,SwFrmFmt * pFrmFmt)912 SwFlyFrmFmt* SwFEShell::InsertObject( const svt::EmbeddedObjectRef& xObj,
913 const SfxItemSet* pFlyAttrSet,
914 const SfxItemSet* pGrfAttrSet,
915 SwFrmFmt* pFrmFmt )
916 {
917 SwFlyFrmFmt* pFmt = 0;
918 SET_CURR_SHELL( this );
919 StartAllAction();
920 FOREACHPAM_START( this )
921 pFmt = GetDoc()->Insert(*PCURCRSR, xObj,
922 pFlyAttrSet, pGrfAttrSet, pFrmFmt );
923 ASSERT( pFmt, "Doc->Insert(notxt) failed." );
924
925 FOREACHPAM_END()
926 EndAllAction();
927
928 if( pFmt )
929 {
930 const Point aPt( GetCrsrDocPos() );
931 SwFlyFrm* pFrm = pFmt->GetFrm( &aPt );
932
933 if( pFrm )
934 SelectFlyFrm( *pFrm, sal_True );
935 else
936 GetLayout()->SetAssertFlyPages();
937 }
938
939 return pFmt;
940 }
941
942
InsertDrawObj(SdrObject & rDrawObj,const Point & rInsertPosition)943 void SwFEShell::InsertDrawObj( SdrObject& rDrawObj,
944 const Point& rInsertPosition )
945 {
946 SET_CURR_SHELL( this );
947
948 SfxItemSet rFlyAttrSet( GetDoc()->GetAttrPool(), aFrmFmtSetRange );
949 rFlyAttrSet.Put( SwFmtAnchor( FLY_AT_PARA ));
950 // --> OD 2009-12-29 #i89920#
951 rFlyAttrSet.Put( SwFmtSurround( SURROUND_THROUGHT ) );
952 rDrawObj.SetLayer( getIDocumentDrawModelAccess()->GetHeavenId() );
953 // <--
954
955 // find anchor position
956 SwPaM aPam( pDoc->GetNodes() );
957 {
958 SwCrsrMoveState aState( MV_SETONLYTEXT );
959 Point aTmpPt( rInsertPosition );
960 GetLayout()->GetCrsrOfst( aPam.GetPoint(), aTmpPt, &aState );
961 const SwFrm* pFrm = aPam.GetCntntNode()->getLayoutFrm( GetLayout(), 0, 0, sal_False );
962 const Point aRelPos( rInsertPosition.X() - pFrm->Frm().Left(),
963 rInsertPosition.Y() - pFrm->Frm().Top() );
964 rDrawObj.SetRelativePos( aRelPos );
965 ::lcl_FindAnchorPos( *this, *GetDoc(), rInsertPosition, *pFrm, rFlyAttrSet );
966 }
967 // insert drawing object into the document creating a new <SwDrawFrmFmt> instance
968 SwDrawFrmFmt* pFmt = GetDoc()->InsertDrawObj( aPam, rDrawObj, rFlyAttrSet );
969
970 // move object to visible layer
971 SwContact* pContact = static_cast<SwContact*>(rDrawObj.GetUserCall());
972 if ( pContact )
973 {
974 pContact->MoveObjToVisibleLayer( &rDrawObj );
975 }
976
977 if ( pFmt )
978 {
979 // select drawing object
980 Imp()->GetDrawView()->MarkObj( &rDrawObj, Imp()->GetPageView(),
981 sal_False, sal_False );
982 }
983 else
984 {
985 GetLayout()->SetAssertFlyPages();
986 }
987 }
988
989 /***********************************************************************
990 #* Class : SwFEShell
991 #* Methode : GetPageObjs
992 #* Datum : ??
993 #* Update : MA 11. Jan. 95
994 #***********************************************************************/
995
GetPageObjs(SvPtrarr & rFillArr)996 void SwFEShell::GetPageObjs( SvPtrarr& rFillArr )
997 {
998 if( rFillArr.Count() )
999 rFillArr.Remove( 0, rFillArr.Count() );
1000
1001 const SwFrmFmt* pFmt;
1002 for( sal_uInt16 n = 0; n < pDoc->GetSpzFrmFmts()->Count(); ++n )
1003 {
1004 pFmt = (const SwFrmFmt*)(*pDoc->GetSpzFrmFmts())[n];
1005 if (FLY_AT_PAGE == pFmt->GetAnchor().GetAnchorId())
1006 {
1007 rFillArr.Insert( (VoidPtr)pFmt, rFillArr.Count() );
1008 }
1009 }
1010 }
1011
1012 /***********************************************************************
1013 #* Class : SwFEShell
1014 #* Methode : SetPageFlysNewPage
1015 #* Datum : ??
1016 #* Update : MA 14. Feb. 95
1017 #***********************************************************************/
1018
SetPageObjsNewPage(SvPtrarr & rFillArr,int nOffset)1019 void SwFEShell::SetPageObjsNewPage( SvPtrarr& rFillArr, int nOffset )
1020 {
1021 if( !rFillArr.Count() || !nOffset )
1022 return;
1023
1024 StartAllAction();
1025 StartUndo();
1026
1027 SwFrmFmt* pFmt;
1028 long nNewPage;
1029 SwRootFrm* pTmpRootFrm = GetLayout();//swmod 080317
1030 sal_uInt16 nMaxPage = pTmpRootFrm->GetPageNum();
1031 sal_Bool bTmpAssert = sal_False;
1032 for( sal_uInt16 n = 0; n < rFillArr.Count(); ++n )
1033 {
1034 pFmt = (SwFrmFmt*)rFillArr[n];
1035 if( USHRT_MAX != pDoc->GetSpzFrmFmts()->GetPos( pFmt ))
1036 {
1037 // FlyFmt ist noch gueltig, also behandeln
1038 SwFmtAnchor aNewAnchor( pFmt->GetAnchor() );
1039 if ((FLY_AT_PAGE != aNewAnchor.GetAnchorId()) ||
1040 0 >= ( nNewPage = aNewAnchor.GetPageNum() + nOffset ) )
1041 // chaos::Anchor wurde veraendert oder ungueltige SeitenNummer,
1042 // also nicht veraendern !!
1043 continue;
1044
1045 if( sal_uInt16(nNewPage) > nMaxPage )
1046 {
1047 if ( RES_DRAWFRMFMT == pFmt->Which() )
1048 {
1049 SwContact *pCon = pFmt->FindContactObj();
1050 if( pCon )
1051 ((SwDrawContact*)pCon)->DisconnectFromLayout();
1052 }
1053 else
1054 pFmt->DelFrms();
1055 bTmpAssert = sal_True;
1056 }
1057 aNewAnchor.SetPageNum( sal_uInt16(nNewPage) );
1058 pDoc->SetAttr( aNewAnchor, *pFmt );
1059 }
1060 }
1061
1062 if( bTmpAssert )
1063 pTmpRootFrm->SetAssertFlyPages();
1064
1065 EndUndo();
1066 EndAllAction();
1067 }
1068
1069 /***********************************************************************
1070 #* Class : SwFEShell
1071 #* Methode : GetFlyFrmAttr
1072 #* Beschreibung: Alle Attribute in dem 'Koerbchen' werden mit den
1073 #* Attributen des aktuellen FlyFrms gefuellt.
1074 #* Sind Attribute nicht zu fuellen weil fehl am Platz oder
1075 #* uneindeutig (Mehrfachtselektionen) so werden sie entfernt.
1076 #* Datum : MA 03. Nov. 92
1077 #* Update : MA 03. Feb. 94
1078 #***********************************************************************/
1079
GetFlyFrmAttr(SfxItemSet & rSet) const1080 sal_Bool SwFEShell::GetFlyFrmAttr( SfxItemSet &rSet ) const
1081 {
1082 SwFlyFrm *pFly = FindFlyFrm();
1083 if ( !pFly )
1084 {
1085 // --> OD 2006-11-08 #139670# - make code robust
1086 SwFrm* pCurrFrm( GetCurrFrm() );
1087 if ( !pCurrFrm )
1088 {
1089 ASSERT( false,
1090 "<SwFEShell::GetFlyFrmAttr(..)> - missing current frame. This is a serious defect, please inform OD." );
1091 return sal_False;
1092 }
1093 // <--
1094 pFly = GetCurrFrm()->FindFlyFrm();
1095 if ( !pFly )
1096 {
1097 ASSERT( !this, "GetFlyFrmAttr, no Fly selected." );
1098 return sal_False;
1099 }
1100 }
1101
1102 SET_CURR_SHELL( (ViewShell*)this );
1103
1104 if( !rSet.Set( pFly->GetFmt()->GetAttrSet(), sal_True ) )
1105 return sal_False;
1106
1107 //Und die Attribute durchschaufeln. Unerlaubte Attribute entfernen, dann
1108 //alle restlichen Attribute besorgen und eintragen.
1109 const SfxPoolItem* pItem;
1110 if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False, &pItem ) )
1111 {
1112 SwFmtAnchor* pAnchor = (SwFmtAnchor*)pItem;
1113 RndStdIds eType = pAnchor->GetAnchorId();
1114
1115 if ( FLY_AT_PAGE != eType )
1116 {
1117 // OD 12.11.2003 #i22341# - content anchor of anchor item is needed.
1118 // Thus, don't overwrite anchor item by default contructed anchor item.
1119 //rSet.Put( SwFmtAnchor( eType ) );
1120 if ( FLY_AS_CHAR == eType )
1121 {
1122 rSet.ClearItem( RES_OPAQUE );
1123 rSet.ClearItem( RES_SURROUND );
1124 }
1125 }
1126 }
1127 rSet.SetParent( pFly->GetFmt()->GetAttrSet().GetParent() );
1128 //JP 11.02.97: Bug #35894#: die Attribute MUESSEN entfern werden!
1129 rSet.ClearItem( RES_FILL_ORDER );
1130 rSet.ClearItem( RES_CNTNT );
1131 //MA: Ersteinmal entfernen (Template by example usw.)
1132 rSet.ClearItem( RES_CHAIN );
1133 return sal_True;
1134 }
1135 /***********************************************************************
1136 #* Class : SwFEShell
1137 #* Methode : SetFlyFrmAttr
1138 #* Beschreibung: Die Attribute des aktuellen Flys aendern sich.
1139 #* Datum : MA 03. Nov. 92
1140 #* Update : MA 01. Aug. 95
1141 #***********************************************************************/
1142
SetFlyFrmAttr(SfxItemSet & rSet)1143 sal_Bool SwFEShell::SetFlyFrmAttr( SfxItemSet& rSet )
1144 {
1145 SET_CURR_SHELL( this );
1146 sal_Bool bRet = sal_False;
1147
1148 if( rSet.Count() )
1149 {
1150 SwFlyFrm *pFly = FindFlyFrm();
1151 if( !pFly )
1152 {
1153 ASSERT( GetCurrFrm(), "Crsr in parking zone" );
1154 pFly = GetCurrFrm()->FindFlyFrm();
1155 ASSERT( pFly, "SetFlyFrmAttr, no Fly selected." );
1156 }
1157 if( pFly )
1158 {
1159 StartAllAction();
1160 const Point aPt( pFly->Frm().Pos() );
1161
1162 if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False ))
1163 ::lcl_ChkAndSetNewAnchor( *this, *pFly, rSet );
1164 SwFlyFrmFmt* pFlyFmt = (SwFlyFrmFmt*)pFly->GetFmt();
1165
1166 if( GetDoc()->SetFlyFrmAttr( *pFlyFmt, rSet ))
1167 {
1168 bRet = sal_True;
1169 SwFlyFrm* pFrm = pFlyFmt->GetFrm( &aPt );
1170 if( pFrm )
1171 SelectFlyFrm( *pFrm, sal_True );
1172 else
1173 GetLayout()->SetAssertFlyPages();
1174 }
1175
1176 EndAllActionAndCall();
1177 }
1178 }
1179 return bRet;
1180 }
1181 /*-- 30.03.2004 15:05:07---------------------------------------------------
1182
1183 -----------------------------------------------------------------------*/
SetDrawingAttr(SfxItemSet & rSet)1184 sal_Bool SwFEShell::SetDrawingAttr( SfxItemSet& rSet )
1185 {
1186 sal_Bool bRet = sal_False;
1187 SET_CURR_SHELL( this );
1188 if ( !rSet.Count() ||
1189 !Imp()->HasDrawView() )
1190 return bRet;
1191
1192 const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
1193 if ( rMrkList.GetMarkCount() != 1 )
1194 return bRet;
1195
1196 StartUndo();
1197 SdrObject *pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
1198 SwFrmFmt *pFmt = FindFrmFmt( pObj );
1199 StartAllAction();
1200 if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False ))
1201 {
1202 RndStdIds nNew = ((SwFmtAnchor&)rSet.Get( RES_ANCHOR )).GetAnchorId();
1203 if ( nNew != pFmt->GetAnchor().GetAnchorId() )
1204 {
1205 ChgAnchor( nNew );
1206 // --> OD 2004-06-17 #i26791# - clear anchor attribute in item set,
1207 // because method <ChgAnchor(..)> takes care of it.
1208 rSet.ClearItem( RES_ANCHOR );
1209 }
1210 }
1211
1212 if( GetDoc()->SetFlyFrmAttr( *pFmt, rSet ))
1213 {
1214 bRet = sal_True;
1215 Point aTmp;
1216 SelectObj( aTmp, 0, pObj );
1217 }
1218 EndAllActionAndCall();
1219 EndUndo();
1220 return bRet;
1221 }
1222
1223
1224 /***********************************************************************
1225 #* Class : SwFEShell
1226 #* Methode : ResetFlyFrmAttr
1227 #* Beschreibung: Das gewuenschte Attribut oder die im Set befindlichen
1228 #* werden zurueckgesetzt.
1229 #* Datum : MA 14. Mar. 97
1230 #* Update : MA 14. Mar. 97
1231 #***********************************************************************/
1232
ResetFlyFrmAttr(sal_uInt16 nWhich,const SfxItemSet * pSet)1233 sal_Bool SwFEShell::ResetFlyFrmAttr( sal_uInt16 nWhich, const SfxItemSet* pSet )
1234 {
1235 sal_Bool bRet = sal_False;
1236
1237 if( RES_ANCHOR != nWhich && RES_CHAIN != nWhich && RES_CNTNT != nWhich )
1238 {
1239 SET_CURR_SHELL( this );
1240
1241 SwFlyFrm *pFly = FindFlyFrm();
1242 if( !pFly )
1243 {
1244 ASSERT( GetCurrFrm(), "Crsr in parking zone" );
1245 pFly = GetCurrFrm()->FindFlyFrm();
1246 ASSERT( pFly, "SetFlyFrmAttr, no Fly selected." );
1247 }
1248
1249 if( pFly )
1250 {
1251 StartAllAction();
1252
1253 if( pSet )
1254 {
1255 SfxItemIter aIter( *pSet );
1256 const SfxPoolItem* pItem = aIter.FirstItem();
1257 while( pItem )
1258 {
1259 if( !IsInvalidItem( pItem ) &&
1260 RES_ANCHOR != ( nWhich = pItem->Which() ) &&
1261 RES_CHAIN != nWhich && RES_CNTNT != nWhich )
1262 pFly->GetFmt()->ResetFmtAttr( nWhich );
1263 pItem = aIter.NextItem();
1264 }
1265 }
1266 else
1267 pFly->GetFmt()->ResetFmtAttr( nWhich );
1268
1269 bRet = sal_True;
1270 EndAllActionAndCall();
1271 GetDoc()->SetModified();
1272 }
1273 }
1274 return bRet;
1275 }
1276
1277 /***********************************************************************
1278 #* Class : SwFEShell
1279 #* Methode : GetCurFrmFmt
1280 #* Beschreibung: liefert wenn Rahmen, dann Rahmenvorlage, sonst 0
1281 #* Datum : ST 04. Jun. 93
1282 #* Update :
1283 #***********************************************************************/
1284
GetCurFrmFmt() const1285 SwFrmFmt* SwFEShell::GetCurFrmFmt() const
1286 {
1287 SwFrmFmt* pRet = 0;
1288 SwLayoutFrm *pFly = FindFlyFrm();
1289 if( pFly && ( pRet = (SwFrmFmt*)pFly->GetFmt()->DerivedFrom() ) ==
1290 GetDoc()->GetDfltFrmFmt() )
1291 pRet = 0;
1292 return pRet;
1293 }
1294
1295 /******************************************************************************
1296 * Methode : void SwFEShell::SetFrmFmt(SwFrmFmt *pNewFmt)
1297 * Beschreibung:
1298 * Erstellt : OK 14.04.94 15:40
1299 * Aenderung : MA 23. Apr. 97
1300 ******************************************************************************/
1301
SetFrmFmt(SwFrmFmt * pNewFmt,sal_Bool bKeepOrient,Point * pDocPos)1302 void SwFEShell::SetFrmFmt( SwFrmFmt *pNewFmt, sal_Bool bKeepOrient, Point* pDocPos )
1303 {
1304 SwFlyFrm *pFly = 0;
1305 if(pDocPos)
1306 {
1307 const SwFrmFmt* pFmt = GetFmtFromObj( *pDocPos );
1308
1309 if(PTR_CAST(SwFlyFrmFmt, pFmt))
1310 pFly = ((SwFlyFrmFmt*)pFmt)->GetFrm();
1311 }
1312 else
1313 pFly = FindFlyFrm();
1314 ASSERT( pFly, "SetFrmFmt: kein Frame" );
1315 if( pFly )
1316 {
1317 StartAllAction();
1318 SET_CURR_SHELL( this );
1319
1320 SwFlyFrmFmt* pFlyFmt = (SwFlyFrmFmt*)pFly->GetFmt();
1321 const Point aPt( pFly->Frm().Pos() );
1322
1323 SfxItemSet* pSet = 0;
1324 const SfxPoolItem* pItem;
1325 if( SFX_ITEM_SET == pNewFmt->GetItemState( RES_ANCHOR, sal_False, &pItem ))
1326 {
1327 pSet = new SfxItemSet( GetDoc()->GetAttrPool(), aFrmFmtSetRange );
1328 pSet->Put( *pItem );
1329 if( !::lcl_ChkAndSetNewAnchor( *this, *pFly, *pSet ))
1330 delete pSet, pSet = 0;
1331 }
1332
1333 if( GetDoc()->SetFrmFmtToFly( *pFlyFmt, *pNewFmt, pSet, bKeepOrient ))
1334 {
1335 SwFlyFrm* pFrm = pFlyFmt->GetFrm( &aPt );
1336 if( pFrm )
1337 SelectFlyFrm( *pFrm, sal_True );
1338 else
1339 GetLayout()->SetAssertFlyPages();
1340 }
1341 if( pSet )
1342 delete pSet;
1343
1344 EndAllActionAndCall();
1345 }
1346 }
1347
1348 /*************************************************************************
1349 |*
1350 |* SwFEShell::GetFlyFrmFmt()
1351 |*
1352 |* Ersterstellung OK 23.06.93 13:15
1353 |* Letzte Aenderung OK 23.06.93 13:15
1354 |*
1355 *************************************************************************/
1356
GetFlyFrmFmt() const1357 const SwFrmFmt* SwFEShell::GetFlyFrmFmt() const
1358 {
1359 const SwFlyFrm* pFly = FindFlyFrm();
1360 if ( !pFly )
1361 {
1362 SwFrm* pCurrFrm = GetCurrFrm();
1363 pFly = pCurrFrm ? pCurrFrm->FindFlyFrm() : 0;
1364 }
1365 if( pFly )
1366 return pFly->GetFmt();
1367 return 0;
1368 }
1369
GetFlyFrmFmt()1370 SwFrmFmt* SwFEShell::GetFlyFrmFmt()
1371 {
1372 SwFlyFrm* pFly = FindFlyFrm();
1373 if ( !pFly )
1374 {
1375 SwFrm* pCurrFrm = GetCurrFrm();
1376 pFly = pCurrFrm ? pCurrFrm->FindFlyFrm() : 0;
1377 }
1378 if( pFly )
1379 return pFly->GetFmt();
1380 return 0;
1381 }
1382
1383 /*************************************************************************
1384 |*
1385 |* SwFEShell::GetFlyRect()
1386 |*
1387 |* Ersterstellung AMA 6. Mae. 97
1388 |* Letzte Aenderung AMA 6. Mae. 97
1389 |*
1390 *************************************************************************/
1391
GetFlyRect() const1392 SwRect SwFEShell::GetFlyRect() const
1393 {
1394 SwCntntFrm *pCntnt = GetCurrFrm( sal_False );
1395 SwFlyFrm *pFly = pCntnt ? pCntnt->FindFlyFrm() : 0;
1396 if ( !pFly )
1397 {
1398 SwRect aRect;
1399 return aRect;
1400 }
1401 else
1402 return pFly->Frm();
1403 }
1404
1405 /*************************************************************************
1406 |*
1407 |* SwFEShell::GetObjRect()
1408 |*
1409 |* Ersterstellung MA 22. Aug. 93
1410 |* Letzte Aenderung MA 11. Jan. 95
1411 |*
1412 *************************************************************************/
1413
GetObjRect() const1414 SwRect SwFEShell::GetObjRect() const
1415 {
1416 if( Imp()->HasDrawView() )
1417 return Imp()->GetDrawView()->GetAllMarkedRect();
1418 else
1419 {
1420 SwRect aRect;
1421 return aRect;
1422 }
1423 }
1424
SetObjRect(const SwRect & rRect)1425 void SwFEShell::SetObjRect( const SwRect& rRect )
1426 {
1427 if ( Imp()->HasDrawView() )
1428 {
1429 Imp()->GetDrawView()->SetAllMarkedRect( rRect.SVRect() );
1430 CallChgLnk(); // rufe das AttrChangeNotify auf der UI-Seite.
1431 }
1432 }
1433
1434 /***********************************************************************
1435 #* Class : SwFEShell
1436 #* Methode : RequestObjectResize()
1437 #* Datum : MA 10. Feb. 95
1438 #* Update : MA 13. Jul. 95
1439 #***********************************************************************/
1440
RequestObjectResize(const SwRect & rRect,const uno::Reference<embed::XEmbeddedObject> & xObj)1441 Size SwFEShell::RequestObjectResize( const SwRect &rRect, const uno::Reference < embed::XEmbeddedObject >& xObj )
1442 {
1443 Size aResult;
1444
1445 SwFlyFrm *pFly = FindFlyFrm( xObj );
1446 if ( !pFly )
1447 {
1448 aResult = rRect.SSize();
1449 return aResult;
1450 }
1451
1452 aResult = pFly->Prt().SSize();
1453
1454 sal_Bool bPosProt = pFly->GetFmt()->GetProtect().IsPosProtected();
1455 sal_Bool bSizeProt = pFly->GetFmt()->GetProtect().IsSizeProtected();
1456
1457 StartAllAction();
1458
1459 //MA wir lassen den Fly nicht Clippen, damit die Ole-Server mit
1460 //beliebigen Wuenschen kommen koennen. Die Formatierung uebernimmt das
1461 //Clippen. Die richtige Darstellung wird per Scalierung erledigt.
1462 //Die Scalierung wird von SwNoTxtFrm::Format durch einen Aufruf von
1463 //SwWrtShell::CalcAndSetScale() erledigt.
1464 if ( rRect.SSize() != pFly->Prt().SSize() && !bSizeProt )
1465 {
1466 Size aSz( rRect.SSize() );
1467
1468 //JP 28.02.2001: Task 74707 - ask for fly in fly with automatic size
1469 //
1470 const SwFrm* pAnchor;
1471 const SwTxtNode* pTNd;
1472 const SwpHints* pHts;
1473 const SwFmtFrmSize& rFrmSz = pFly->GetFmt()->GetFrmSize();
1474 if( bCheckForOLEInCaption &&
1475 0 != rFrmSz.GetWidthPercent() &&
1476 0 != (pAnchor = pFly->GetAnchorFrm()) &&
1477 pAnchor->IsTxtFrm() &&
1478 !pAnchor->GetNext() && !pAnchor->GetPrev() &&
1479 pAnchor->GetUpper()->IsFlyFrm() &&
1480 0 != ( pTNd = ((SwTxtFrm*)pAnchor)->GetNode()->GetTxtNode()) &&
1481 0 != ( pHts = pTNd->GetpSwpHints() ))
1482 {
1483 // search for a sequence field:
1484 const SfxPoolItem* pItem;
1485 for( sal_uInt16 n = 0, nEnd = pHts->Count(); n < nEnd; ++n )
1486 if( RES_TXTATR_FIELD == ( pItem = &(*pHts)[ n ]->GetAttr())->Which()
1487 && TYP_SEQFLD == ((SwFmtFld*)pItem)->GetField()->GetTypeId() )
1488 {
1489 // sequence field found
1490 SwFlyFrm* pChgFly = (SwFlyFrm*)pAnchor->GetUpper();
1491 // calculate the changed size:
1492 // width must change, height can change
1493 Size aNewSz( aSz.Width() + pChgFly->Frm().Width() -
1494 pFly->Prt().Width(), aSz.Height() );
1495
1496 SwFrmFmt *pFmt = pChgFly->GetFmt();
1497 SwFmtFrmSize aFrmSz( pFmt->GetFrmSize() );
1498 aFrmSz.SetWidth( aNewSz.Width() );
1499 if( ATT_MIN_SIZE != aFrmSz.GetHeightSizeType() )
1500 {
1501 aNewSz.Height() += pChgFly->Frm().Height() -
1502 pFly->Prt().Height();
1503 if( Abs( aNewSz.Height() - pChgFly->Frm().Height()) > 1 )
1504 aFrmSz.SetHeight( aNewSz.Height() );
1505 }
1506 // uebers Doc fuers Undo!
1507 pFmt->GetDoc()->SetAttr( aFrmSz, *pFmt );
1508 break;
1509 }
1510 }
1511
1512 // set the new Size at the fly themself
1513 if ( pFly->Prt().Height() > 0 && pFly->Prt().Width() > 0 )
1514 {
1515 aSz.Width() += pFly->Frm().Width() - pFly->Prt().Width();
1516 aSz.Height()+= pFly->Frm().Height()- pFly->Prt().Height();
1517 }
1518 aResult = pFly->ChgSize( aSz );
1519
1520 //Wenn sich das Objekt aendert ist die Kontur hoechstwahrscheinlich daneben.
1521 ASSERT( pFly->Lower()->IsNoTxtFrm(), "Request ohne NoTxt" );
1522 SwNoTxtNode *pNd = ((SwCntntFrm*)pFly->Lower())->GetNode()->GetNoTxtNode();
1523 ASSERT( pNd, "Request ohne Node" );
1524 pNd->SetContour( 0 );
1525 ClrContourCache();
1526 }
1527
1528 //Wenn nur die Size angepasst werden soll, so wird eine Pos mit
1529 //ausgezeichneten Werten transportiert.
1530 Point aPt( pFly->Prt().Pos() );
1531 aPt += pFly->Frm().Pos();
1532 if ( rRect.Top() != LONG_MIN && rRect.Pos() != aPt && !bPosProt )
1533 {
1534 aPt = rRect.Pos();
1535 aPt.X() -= pFly->Prt().Left();
1536 aPt.Y() -= pFly->Prt().Top();
1537 //Bei Absatzgebundenen Flys muss ausgehend von der neuen Position ein
1538 //neuer Anker gesetzt werden. Anker und neue RelPos werden vom Fly
1539 //selbst berechnet und gesetzt.
1540 if( pFly->IsFlyAtCntFrm() )
1541 ((SwFlyAtCntFrm*)pFly)->SetAbsPos( aPt );
1542 else
1543 {
1544 const SwFrmFmt *pFmt = pFly->GetFmt();
1545 const SwFmtVertOrient &rVert = pFmt->GetVertOrient();
1546 const SwFmtHoriOrient &rHori = pFmt->GetHoriOrient();
1547 const long lXDiff = aPt.X() - pFly->Frm().Left();
1548 const long lYDiff = aPt.Y() - pFly->Frm().Top();
1549 const Point aTmp( rHori.GetPos() + lXDiff,
1550 rVert.GetPos() + lYDiff );
1551 pFly->ChgRelPos( aTmp );
1552 }
1553 }
1554
1555 SwFlyFrmFmt *pFlyFrmFmt = pFly->GetFmt();
1556 ASSERT( pFlyFrmFmt, "fly frame format missing!" );
1557 if ( pFlyFrmFmt )
1558 pFlyFrmFmt->SetLastFlyFrmPrtRectPos( pFly->Prt().Pos() ); //stores the value of last Prt rect
1559
1560 EndAllAction();
1561
1562 return aResult;
1563 }
1564
1565
1566 /***********************************************************************
1567 #* Class : SwFEShell
1568 #* Methode : WizzardFindCurFrmFmt
1569 #* Datum : JP 31.07.95
1570 #* Update : JP 31.07.95
1571 #***********************************************************************/
1572
WizzardGetFly()1573 SwFrmFmt* SwFEShell::WizzardGetFly()
1574 {
1575 // mal nicht uebers Layout den Fly suchen. Dann kann auch ohne gueltiges
1576 // Layout ein Rahmen geloescht werden. ( z.B.: fuer die Wizard's )
1577 SwSpzFrmFmts& rSpzArr = *pDoc->GetSpzFrmFmts();
1578 sal_uInt16 nCnt = rSpzArr.Count();
1579 if( nCnt )
1580 {
1581 SwNodeIndex& rCrsrNd = GetCrsr()->GetPoint()->nNode;
1582 if( rCrsrNd.GetIndex() > pDoc->GetNodes().GetEndOfExtras().GetIndex() )
1583 // Cusor steht im Body-Bereich!
1584 return 0;
1585
1586 for( sal_uInt16 n = 0; n < nCnt; ++n )
1587 {
1588 SwFrmFmt* pFmt = rSpzArr[ n ];
1589 const SwNodeIndex* pIdx = pFmt->GetCntnt( sal_False ).GetCntntIdx();
1590 SwStartNode* pSttNd;
1591 if( pIdx &&
1592 0 != ( pSttNd = pIdx->GetNode().GetStartNode() ) &&
1593 pSttNd->GetIndex() < rCrsrNd.GetIndex() &&
1594 rCrsrNd.GetIndex() < pSttNd->EndOfSectionIndex() )
1595 {
1596 // gefunden: also raus damit
1597 return pFmt;
1598 }
1599 }
1600 }
1601 return 0;
1602 }
1603
SetFlyName(const String & rName)1604 void SwFEShell::SetFlyName( const String& rName )
1605 {
1606 SwLayoutFrm *pFly = FindFlyFrm();
1607 if( pFly )
1608 GetDoc()->SetFlyName( *(SwFlyFrmFmt*)pFly->GetFmt(), rName );
1609 else {
1610 ASSERT( !this, "kein FlyFrame selektiert" )
1611 }
1612 }
1613
GetFlyName() const1614 const String& SwFEShell::GetFlyName() const
1615 {
1616 SwLayoutFrm *pFly = FindFlyFrm();
1617 if( pFly )
1618 return pFly->GetFmt()->GetName();
1619
1620 ASSERT( !this, "kein FlyFrame selektiert" )
1621 return aEmptyStr;
1622 }
1623
1624
GetOleRef() const1625 const uno::Reference < embed::XEmbeddedObject > SwFEShell::GetOleRef() const
1626 {
1627 uno::Reference < embed::XEmbeddedObject > xObj;
1628 SwFlyFrm * pFly = FindFlyFrm();
1629 if (pFly && pFly->Lower() && pFly->Lower()->IsNoTxtFrm())
1630 {
1631 SwOLENode *pNd = ((SwNoTxtFrm*)pFly->Lower())->GetNode()->GetOLENode();
1632 if (pNd)
1633 xObj = pNd->GetOLEObj().GetOleRef();
1634 }
1635 return xObj;
1636 }
1637
1638
GetUniqueGrfName() const1639 String SwFEShell::GetUniqueGrfName() const
1640 {
1641 return GetDoc()->GetUniqueGrfName();
1642 }
1643
IsURLGrfAtPos(const Point & rPt,String * pURL,String * pTargetFrameName,String * pDescription) const1644 const SwFrmFmt* SwFEShell::IsURLGrfAtPos( const Point& rPt, String* pURL,
1645 String *pTargetFrameName,
1646 String *pDescription ) const
1647 {
1648 if( !Imp()->HasDrawView() )
1649 return 0;
1650
1651 SdrObject* pObj;
1652 SdrPageView* pPV;
1653 const SwFrmFmt* pRet = 0;
1654 SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView();
1655
1656 sal_uInt16 nOld = pDView->GetHitTolerancePixel();
1657 pDView->SetHitTolerancePixel( 2 );
1658
1659 if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPV,SDRSEARCH_PICKMACRO ) &&
1660 pObj->ISA(SwVirtFlyDrawObj) )
1661 {
1662 SwFlyFrm *pFly = ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm();
1663 const SwFmtURL &rURL = pFly->GetFmt()->GetURL();
1664 if( rURL.GetURL().Len() || rURL.GetMap() )
1665 {
1666 sal_Bool bSetTargetFrameName = pTargetFrameName != 0;
1667 sal_Bool bSetDescription = pDescription != 0;
1668 if ( rURL.GetMap() )
1669 {
1670 IMapObject *pObject = pFly->GetFmt()->GetIMapObject( rPt, pFly );
1671 if ( pObject && pObject->GetURL().Len() )
1672 {
1673 if( pURL )
1674 *pURL = pObject->GetURL();
1675 if ( bSetTargetFrameName && pObject->GetTarget().Len() )
1676 {
1677 bSetTargetFrameName = sal_False;
1678 *pTargetFrameName = pObject->GetTarget();
1679 }
1680 if ( bSetDescription )
1681 {
1682 bSetDescription = sal_False;
1683 *pDescription = pObject->GetAltText();
1684 }
1685 pRet = pFly->GetFmt();
1686 }
1687 }
1688 else
1689 {
1690 if( pURL )
1691 {
1692 *pURL = rURL.GetURL();
1693 if( rURL.IsServerMap() )
1694 {
1695 // dann die rel. Pixel Position anhaengen !!
1696 Point aPt( rPt );
1697 aPt -= pFly->Frm().Pos();
1698 // ohne MapMode-Offset, ohne Offset, o ... !!!!!
1699 aPt = GetOut()->LogicToPixel(
1700 aPt, MapMode( MAP_TWIP ) );
1701 ((( *pURL += '?' ) += String::CreateFromInt32( aPt.X() ))
1702 += ',' ) += String::CreateFromInt32(aPt.Y() );
1703 }
1704 }
1705 pRet = pFly->GetFmt();
1706 }
1707 if ( bSetTargetFrameName )
1708 *pTargetFrameName = rURL.GetTargetFrameName();
1709 if ( bSetDescription )
1710 *pDescription = pFly->GetFmt()->GetName();
1711 }
1712 }
1713 pDView->SetHitTolerancePixel( nOld );
1714 return pRet;
1715 }
1716
GetGrfAtPos(const Point & rPt,String & rName,sal_Bool & rbLink) const1717 const Graphic *SwFEShell::GetGrfAtPos( const Point &rPt,
1718 String &rName, sal_Bool &rbLink ) const
1719 {
1720 if( !Imp()->HasDrawView() )
1721 return 0;
1722
1723 SdrObject* pObj;
1724 SdrPageView* pPV;
1725 SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView();
1726
1727 if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPV ) && pObj->ISA(SwVirtFlyDrawObj) )
1728 {
1729 SwFlyFrm *pFly = ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm();
1730 if ( pFly->Lower() && pFly->Lower()->IsNoTxtFrm() )
1731 {
1732 SwGrfNode *pNd = ((SwCntntFrm*)pFly->Lower())->GetNode()->GetGrfNode();
1733 if ( pNd )
1734 {
1735 if ( pNd->IsGrfLink() )
1736 {
1737 //Halbfertige Grafik?
1738 ::sfx2::SvLinkSource* pLnkObj = pNd->GetLink()->GetObj();
1739 if( pLnkObj && pLnkObj->IsPending() )
1740 return 0;
1741 rbLink = sal_True;
1742 }
1743
1744 pNd->GetFileFilterNms( &rName, 0 );
1745 if ( !rName.Len() )
1746 rName = pFly->GetFmt()->GetName();
1747 pNd->SwapIn( sal_True );
1748 return &pNd->GetGrf();
1749 }
1750 }
1751 }
1752 return 0;
1753 }
1754
1755
GetFmtFromObj(const Point & rPt,SwRect ** pRectToFill) const1756 const SwFrmFmt* SwFEShell::GetFmtFromObj( const Point& rPt, SwRect** pRectToFill ) const
1757 {
1758 SwFrmFmt* pRet = 0;
1759
1760 if( Imp()->HasDrawView() )
1761 {
1762 SdrObject* pObj;
1763 SdrPageView* pPView;
1764
1765 SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView();
1766
1767 sal_uInt16 nOld = pDView->GetHitTolerancePixel();
1768 // Tattergrenze fuer Drawing-SS
1769 pDView->SetHitTolerancePixel( pDView->GetMarkHdlSizePixel()/2 );
1770
1771 if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPView, SDRSEARCH_PICKMARKABLE ) )
1772 {
1773 // dann teste mal was es ist:
1774 if ( pObj->ISA(SwVirtFlyDrawObj) )
1775 pRet = ((SwVirtFlyDrawObj*)pObj)->GetFmt();
1776 else if ( pObj->GetUserCall() ) //nicht fuer Gruppenobjekte
1777 pRet = ((SwDrawContact*)pObj->GetUserCall())->GetFmt();
1778 if(pRet && pRectToFill)
1779 **pRectToFill = pObj->GetCurrentBoundRect();
1780 }
1781 pDView->SetHitTolerancePixel( nOld );
1782 }
1783 return pRet;
1784 }
1785
1786 // returns a format too, if the point is over the text of any fly
GetFmtFromAnyObj(const Point & rPt) const1787 const SwFrmFmt* SwFEShell::GetFmtFromAnyObj( const Point& rPt ) const
1788 {
1789 const SwFrmFmt* pRet = GetFmtFromObj( rPt );
1790 if( !pRet || RES_FLYFRMFMT == pRet->Which() )
1791 {
1792 SwPosition aPos( *GetCrsr()->GetPoint() );
1793 Point aPt( rPt );
1794 GetLayout()->GetCrsrOfst( &aPos, aPt );
1795 SwCntntNode *pNd = aPos.nNode.GetNode().GetCntntNode();
1796 SwFrm* pFrm = pNd->getLayoutFrm( GetLayout(), &rPt, 0, sal_False )->FindFlyFrm();
1797 pRet = pFrm ? ((SwLayoutFrm*)pFrm)->GetFmt() : 0;
1798 }
1799 return pRet;
1800 }
1801
GetObjCntType(const SdrObject & rObj) const1802 ObjCntType SwFEShell::GetObjCntType( const SdrObject& rObj ) const
1803 {
1804 ObjCntType eType = OBJCNT_NONE;
1805
1806 // OD 23.06.2003 #108784# - investigate 'master' drawing object, if method
1807 // is called for a 'virtual' drawing object.
1808 const SdrObject* pInvestigatedObj;
1809 if ( rObj.ISA(SwDrawVirtObj) )
1810 {
1811 const SwDrawVirtObj* pDrawVirtObj = static_cast<const SwDrawVirtObj*>(&rObj);
1812 pInvestigatedObj = &(pDrawVirtObj->GetReferencedObj());
1813 }
1814 else
1815 {
1816 pInvestigatedObj = &rObj;
1817 }
1818
1819 if( FmFormInventor == pInvestigatedObj->GetObjInventor() )
1820 {
1821 eType = OBJCNT_CONTROL;
1822 uno::Reference< awt::XControlModel > xModel =
1823 ((SdrUnoObj&)(*pInvestigatedObj)).GetUnoControlModel();
1824 if( xModel.is() )
1825 {
1826 uno::Any aVal;
1827 OUString sName = OUString::createFromAscii("ButtonType");
1828 uno::Reference< beans::XPropertySet > xSet(xModel, uno::UNO_QUERY);
1829
1830 uno::Reference< beans::XPropertySetInfo > xInfo = xSet->getPropertySetInfo();
1831 if(xInfo->hasPropertyByName( sName ))
1832 {
1833 beans::Property xProperty = xInfo->getPropertyByName( sName );
1834 aVal = xSet->getPropertyValue( sName );
1835 if( aVal.getValue() && form::FormButtonType_URL == *((form::FormButtonType*)aVal.getValue()) )
1836 eType = OBJCNT_URLBUTTON;
1837 }
1838 }
1839 }
1840 else if( pInvestigatedObj->ISA(SwVirtFlyDrawObj) )
1841 {
1842 SwFlyFrm *pFly = ((SwVirtFlyDrawObj&)(*pInvestigatedObj)).GetFlyFrm();
1843 if ( pFly->Lower() && pFly->Lower()->IsNoTxtFrm() )
1844 {
1845 if ( ((SwCntntFrm*)pFly->Lower())->GetNode()->GetGrfNode() )
1846 eType = OBJCNT_GRF;
1847 else
1848 eType = OBJCNT_OLE;
1849 }
1850 else
1851 eType = OBJCNT_FLY;
1852 }
1853 else if ( pInvestigatedObj->ISA( SdrObjGroup ) )
1854 {
1855 SwDrawContact* pDrawContact( dynamic_cast<SwDrawContact*>(GetUserCall( pInvestigatedObj ) ) );
1856 if ( !pDrawContact )
1857 {
1858 ASSERT( false,
1859 "<SwFEShell::GetObjCntType(..)> - missing draw contact object" );
1860 eType = OBJCNT_NONE;
1861 }
1862 else
1863 {
1864 SwFrmFmt* pFrmFmt( pDrawContact->GetFmt() );
1865 if ( !pFrmFmt )
1866 {
1867 ASSERT( false,
1868 "<SwFEShell::GetObjCntType(..)> - missing frame format" );
1869 eType = OBJCNT_NONE;
1870 }
1871 else if ( FLY_AS_CHAR != pFrmFmt->GetAnchor().GetAnchorId() )
1872 {
1873 eType = OBJCNT_GROUPOBJ;
1874 }
1875 }
1876 }
1877 else
1878 eType = OBJCNT_SIMPLE;
1879 return eType;
1880 }
1881
GetObjCntType(const Point & rPt,SdrObject * & rpObj) const1882 ObjCntType SwFEShell::GetObjCntType( const Point &rPt, SdrObject *&rpObj ) const
1883 {
1884 ObjCntType eType = OBJCNT_NONE;
1885
1886 if( Imp()->HasDrawView() )
1887 {
1888 SdrObject* pObj;
1889 SdrPageView* pPView;
1890
1891 SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView();
1892
1893 sal_uInt16 nOld = pDView->GetHitTolerancePixel();
1894 // Tattergrenze fuer Drawing-SS
1895 pDView->SetHitTolerancePixel( pDView->GetMarkHdlSizePixel()/2 );
1896
1897 if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPView, SDRSEARCH_PICKMARKABLE ) )
1898 eType = GetObjCntType( *(rpObj = pObj) );
1899
1900 pDView->SetHitTolerancePixel( nOld );
1901 }
1902 return eType;
1903 }
1904
GetObjCntTypeOfSelection(SdrObject ** ppObj) const1905 ObjCntType SwFEShell::GetObjCntTypeOfSelection( SdrObject** ppObj ) const
1906 {
1907 ObjCntType eType = OBJCNT_NONE;
1908
1909 if( Imp()->HasDrawView() )
1910 {
1911 const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
1912 for( sal_uInt32 i = 0, nE = rMrkList.GetMarkCount(); i < nE; ++i )
1913 {
1914 SdrObject* pObj = rMrkList.GetMark( i )->GetMarkedSdrObj();
1915 if( !pObj )
1916 continue;
1917 ObjCntType eTmp = GetObjCntType( *pObj );
1918 if( !i )
1919 {
1920 eType = eTmp;
1921 if( ppObj ) *ppObj = pObj;
1922 }
1923 else if( eTmp != eType )
1924 {
1925 eType = OBJCNT_DONTCARE;
1926 // einmal DontCare, immer DontCare!
1927 break;
1928 }
1929 }
1930 }
1931 return eType;
1932 }
1933
1934
ReplaceSdrObj(const String & rGrfName,const String & rFltName,const Graphic * pGrf)1935 sal_Bool SwFEShell::ReplaceSdrObj( const String& rGrfName, const String& rFltName,
1936 const Graphic* pGrf )
1937 {
1938 SET_CURR_SHELL( this );
1939
1940 sal_Bool bRet = sal_False;
1941 const SdrMarkList *pMrkList;
1942 if( Imp()->HasDrawView() && 1 ==
1943 ( pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList())->GetMarkCount() )
1944 {
1945 SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj();
1946 SwFrmFmt *pFmt = FindFrmFmt( pObj );
1947
1948 // Attribute sichern und dann an der Grafik setzen
1949 SfxItemSet aFrmSet( pDoc->GetAttrPool(),
1950 pFmt->GetAttrSet().GetRanges() );
1951 aFrmSet.Set( pFmt->GetAttrSet() );
1952
1953 // Groesse und Position setzen ??
1954 if( !pObj->ISA(SwVirtFlyDrawObj) )
1955 {
1956 // dann mal los:
1957 const Rectangle &rBound = pObj->GetSnapRect();
1958 Point aRelPos( pObj->GetRelativePos() );
1959
1960 const long nWidth = rBound.Right() - rBound.Left();
1961 const long nHeight= rBound.Bottom() - rBound.Top();
1962 aFrmSet.Put( SwFmtFrmSize( ATT_MIN_SIZE,
1963 Max( nWidth, long(MINFLY) ),
1964 Max( nHeight, long(MINFLY) )));
1965
1966 if( SFX_ITEM_SET != aFrmSet.GetItemState( RES_HORI_ORIENT ))
1967 aFrmSet.Put( SwFmtHoriOrient( aRelPos.X(), text::HoriOrientation::NONE, text::RelOrientation::FRAME ));
1968
1969 if( SFX_ITEM_SET != aFrmSet.GetItemState( RES_VERT_ORIENT ))
1970 aFrmSet.Put( SwFmtVertOrient( aRelPos.Y(), text::VertOrientation::NONE, text::RelOrientation::FRAME ));
1971
1972 }
1973
1974 pObj->GetOrdNum();
1975
1976 StartAllAction();
1977 StartUndo();
1978
1979 // das "Sdr-Object" loeschen und dafuer die Grafik einfuegen
1980 DelSelectedObj();
1981
1982 pFmt = GetDoc()->Insert( *GetCrsr(), rGrfName, rFltName, pGrf, &aFrmSet, NULL, NULL );
1983
1984 // die Ordnungsnummer (Z-Order) noch uebertragen
1985 // JP 04.07.98: klappt aber nicht richtig!
1986 //SdrObject* pNewObj = ::FindSdrObject( pFmt );
1987 //pNewObj->SetOrdNum( nOrdNum );
1988
1989 EndUndo();
1990 EndAllAction();
1991 bRet = sal_True;
1992 }
1993 return bRet;
1994 }
1995
SwFmtGetPageNum(const SwFlyFrmFmt * pFmt)1996 static sal_uInt16 SwFmtGetPageNum(const SwFlyFrmFmt * pFmt)
1997 {
1998 ASSERT(pFmt != NULL, "invalid argument");
1999
2000 SwFlyFrm * pFrm = pFmt->GetFrm();
2001
2002 sal_uInt16 aResult;
2003
2004 if (pFrm != NULL)
2005 aResult = pFrm->GetPhyPageNum();
2006 else
2007 aResult = pFmt->GetAnchor().GetPageNum();
2008
2009 return aResult;
2010 }
2011
2012 #include <fmtcnct.hxx>
2013
GetConnectableFrmFmts(SwFrmFmt & rFmt,const String & rReference,sal_Bool bSuccessors,::std::vector<String> & aPrevPageVec,::std::vector<String> & aThisPageVec,::std::vector<String> & aNextPageVec,::std::vector<String> & aRestVec)2014 void SwFEShell::GetConnectableFrmFmts(SwFrmFmt & rFmt,
2015 const String & rReference,
2016 sal_Bool bSuccessors,
2017 ::std::vector< String > & aPrevPageVec,
2018 ::std::vector< String > & aThisPageVec,
2019 ::std::vector< String > & aNextPageVec,
2020 ::std::vector< String > & aRestVec)
2021 {
2022 StartAction();
2023
2024 SwFmtChain rChain = rFmt.GetChain();
2025 SwFrmFmt * pOldChainNext = (SwFrmFmt *) rChain.GetNext();
2026 SwFrmFmt * pOldChainPrev = (SwFrmFmt *) rChain.GetPrev();
2027
2028 if (pOldChainNext)
2029 pDoc->Unchain(rFmt);
2030
2031 if (pOldChainPrev)
2032 pDoc->Unchain(*pOldChainPrev);
2033
2034 sal_uInt16 nCnt = pDoc->GetFlyCount(FLYCNTTYPE_FRM);
2035
2036 /* potential successors resp. predecessors */
2037 ::std::vector< const SwFrmFmt * > aTmpSpzArray;
2038
2039 (SwFrmFmt *) pDoc->FindFlyByName(rReference);
2040
2041 for (sal_uInt16 n = 0; n < nCnt; n++)
2042 {
2043 const SwFrmFmt & rFmt1 = *(pDoc->GetFlyNum(n, FLYCNTTYPE_FRM));
2044
2045 /*
2046 pFmt is a potential successor of rFmt if it is chainable after
2047 rFmt.
2048
2049 pFmt is a potential predecessor of rFmt if rFmt is chainable
2050 after pFmt.
2051 */
2052
2053 int nChainState;
2054
2055 if (bSuccessors)
2056 nChainState = pDoc->Chainable(rFmt, rFmt1);
2057 else
2058 nChainState = pDoc->Chainable(rFmt1, rFmt);
2059
2060 if (nChainState == SW_CHAIN_OK)
2061 {
2062 aTmpSpzArray.push_back(&rFmt1);
2063
2064 }
2065
2066 }
2067
2068 if (aTmpSpzArray.size() > 0)
2069 {
2070 aPrevPageVec.clear();
2071 aThisPageVec.clear();
2072 aNextPageVec.clear();
2073 aRestVec.clear();
2074
2075 /* number of page rFmt resides on */
2076 sal_uInt16 nPageNum = SwFmtGetPageNum((SwFlyFrmFmt *) &rFmt);
2077
2078 ::std::vector< const SwFrmFmt * >::const_iterator aIt;
2079
2080 for (aIt = aTmpSpzArray.begin(); aIt != aTmpSpzArray.end(); aIt++)
2081 {
2082 String aString = (*aIt)->GetName();
2083
2084 /* rFmt is not a vaild successor or predecessor of
2085 itself */
2086 if (aString != rReference && aString != rFmt.GetName())
2087 {
2088 sal_uInt16 nNum1 =
2089 SwFmtGetPageNum((SwFlyFrmFmt *) *aIt);
2090
2091 if (nNum1 == nPageNum -1)
2092 aPrevPageVec.push_back(aString);
2093 else if (nNum1 == nPageNum)
2094 aThisPageVec.push_back(aString);
2095 else if (nNum1 == nPageNum + 1)
2096 aNextPageVec.push_back(aString);
2097 else
2098 aRestVec.push_back(aString);
2099 }
2100 }
2101
2102 }
2103
2104 if (pOldChainNext)
2105 pDoc->Chain(rFmt, *pOldChainNext);
2106
2107 if (pOldChainPrev)
2108 pDoc->Chain(*pOldChainPrev, rFmt);
2109
2110 EndAction();
2111 }
2112
2113 // --> OD 2009-07-13 #i73249#
GetObjTitle() const2114 const String SwFEShell::GetObjTitle() const
2115 {
2116 String aTitle;
2117
2118 if ( Imp()->HasDrawView() )
2119 {
2120 const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList();
2121 if ( pMrkList->GetMarkCount() == 1 )
2122 {
2123 const SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj();
2124 const SwFrmFmt* pFmt = FindFrmFmt( pObj );
2125 if ( pFmt->Which() == RES_FLYFRMFMT )
2126 {
2127 aTitle = dynamic_cast<const SwFlyFrmFmt*>(pFmt)->GetObjTitle();
2128 }
2129 else
2130 {
2131 aTitle = pObj->GetTitle();
2132 }
2133 }
2134 }
2135
2136 return aTitle;
2137 }
2138
SetObjTitle(const String & rTitle)2139 void SwFEShell::SetObjTitle( const String& rTitle )
2140 {
2141 if ( Imp()->HasDrawView() )
2142 {
2143 const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList();
2144 if ( pMrkList->GetMarkCount() == 1 )
2145 {
2146 SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj();
2147 SwFrmFmt* pFmt = FindFrmFmt( pObj );
2148 if ( pFmt->Which() == RES_FLYFRMFMT )
2149 {
2150 GetDoc()->SetFlyFrmTitle( *(dynamic_cast<SwFlyFrmFmt*>(pFmt)),
2151 rTitle );
2152 }
2153 else
2154 {
2155 pObj->SetTitle( rTitle );
2156 }
2157 }
2158 }
2159 }
2160
GetObjDescription() const2161 const String SwFEShell::GetObjDescription() const
2162 {
2163 String aDescription;
2164
2165 if ( Imp()->HasDrawView() )
2166 {
2167 const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList();
2168 if ( pMrkList->GetMarkCount() == 1 )
2169 {
2170 const SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj();
2171 const SwFrmFmt* pFmt = FindFrmFmt( pObj );
2172 if ( pFmt->Which() == RES_FLYFRMFMT )
2173 {
2174 aDescription = dynamic_cast<const SwFlyFrmFmt*>(pFmt)->GetObjDescription();
2175 }
2176 else
2177 {
2178 aDescription = pObj->GetDescription();
2179 }
2180 }
2181 }
2182
2183 return aDescription;
2184 }
2185
SetObjDescription(const String & rDescription)2186 void SwFEShell::SetObjDescription( const String& rDescription )
2187 {
2188 if ( Imp()->HasDrawView() )
2189 {
2190 const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList();
2191 if ( pMrkList->GetMarkCount() == 1 )
2192 {
2193 SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj();
2194 SwFrmFmt* pFmt = FindFrmFmt( pObj );
2195 if ( pFmt->Which() == RES_FLYFRMFMT )
2196 {
2197 GetDoc()->SetFlyFrmDescription( *(dynamic_cast<SwFlyFrmFmt*>(pFmt)),
2198 rDescription );
2199 }
2200 else
2201 {
2202 pObj->SetDescription( rDescription );
2203 }
2204 }
2205 }
2206 }
2207
2208
AlignFormulaToBaseline(const uno::Reference<embed::XEmbeddedObject> & xObj,SwFlyFrm * pFly)2209 void SwFEShell::AlignFormulaToBaseline( const uno::Reference < embed::XEmbeddedObject >& xObj, SwFlyFrm * pFly )
2210 {
2211 #if OSL_DEBUG_LEVEL > 1
2212 SvGlobalName aCLSID( xObj->getClassID() );
2213 const bool bStarMath = ( SotExchange::IsMath( aCLSID ) != 0 );
2214 ASSERT( bStarMath, "AlignFormulaToBaseline should only be called for Math objects" );
2215
2216 if ( !bStarMath )
2217 return;
2218 #endif
2219
2220 if (!pFly)
2221 pFly = FindFlyFrm( xObj );
2222 ASSERT( pFly , "No fly frame!" );
2223 SwFrmFmt * pFrmFmt = pFly ? pFly->GetFmt() : 0;
2224
2225 // baseline to baseline alignment should only be applied to formulas anchored as char
2226 if ( pFly && pFrmFmt && FLY_AS_CHAR == pFrmFmt->GetAnchor().GetAnchorId() )
2227 {
2228 // get baseline from Math object
2229 uno::Any aBaseline;
2230 if( svt::EmbeddedObjectRef::TryRunningState( xObj ) )
2231 {
2232 uno::Reference < beans::XPropertySet > xSet( xObj->getComponent(), uno::UNO_QUERY );
2233 if ( xSet.is() )
2234 {
2235 try
2236 {
2237 aBaseline = xSet->getPropertyValue( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM("BaseLine") ) );
2238 }
2239 catch ( uno::Exception& )
2240 {
2241 ASSERT( sal_False , "Baseline could not be retrieved from Starmath!" );
2242 }
2243 }
2244 }
2245
2246 sal_Int32 nBaseline = ::comphelper::getINT32(aBaseline);
2247 const MapMode aSourceMapMode( MAP_100TH_MM );
2248 const MapMode aTargetMapMode( MAP_TWIP );
2249 nBaseline = OutputDevice::LogicToLogic( nBaseline, aSourceMapMode.GetMapUnit(), aTargetMapMode.GetMapUnit() );
2250
2251 ASSERT( nBaseline > 0, "Wrong value of Baseline while retrieving from Starmath!" );
2252 //nBaseline must be moved by aPrt position
2253 const SwFlyFrmFmt *pFlyFrmFmt = pFly->GetFmt();
2254 ASSERT( pFlyFrmFmt, "fly frame format missing!" );
2255 if ( pFlyFrmFmt )
2256 nBaseline += pFlyFrmFmt->GetLastFlyFrmPrtRectPos().Y();
2257
2258 const SwFmtVertOrient &rVert = pFrmFmt->GetVertOrient();
2259 SwFmtVertOrient aVert( rVert );
2260 aVert.SetPos( -nBaseline );
2261 aVert.SetVertOrient( com::sun::star::text::VertOrientation::NONE );
2262
2263 pFrmFmt->LockModify();
2264 pFrmFmt->SetFmtAttr( aVert );
2265 pFrmFmt->UnlockModify();
2266 pFly->InvalidatePos();
2267 }
2268 }
2269
2270
AlignAllFormulasToBaseline()2271 void SwFEShell::AlignAllFormulasToBaseline()
2272 {
2273 StartAllAction();
2274
2275 SwStartNode *pStNd;
2276 SwNodeIndex aIdx( *GetNodes().GetEndOfAutotext().StartOfSectionNode(), 1 );
2277 while ( 0 != (pStNd = aIdx.GetNode().GetStartNode()) )
2278 {
2279 ++aIdx;
2280 SwOLENode *pOleNode = dynamic_cast< SwOLENode * >( &aIdx.GetNode() );
2281 if ( pOleNode )
2282 {
2283 const uno::Reference < embed::XEmbeddedObject > & xObj( pOleNode->GetOLEObj().GetOleRef() );
2284 if (xObj.is())
2285 {
2286 SvGlobalName aCLSID( xObj->getClassID() );
2287 if ( SotExchange::IsMath( aCLSID ) )
2288 AlignFormulaToBaseline( xObj );
2289 }
2290 }
2291
2292 aIdx.Assign( *pStNd->EndOfSectionNode(), + 1 );
2293 }
2294
2295 EndAllAction();
2296 }
2297