1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sc.hxx"
26
27
28
29 // INCLUDE ---------------------------------------------------------------
30
31 #include <editeng/eeitem.hxx>
32 #include <svx/svdograf.hxx>
33 #include <svx/svdoole2.hxx>
34 #include <svx/svdoutl.hxx>
35 #include <svx/svdpage.hxx>
36 #include <svx/svdpagv.hxx>
37 #include <svx/svdview.hxx>
38 #include <vcl/svapp.hxx>
39
40 #include "output.hxx"
41 #include "drwlayer.hxx"
42 #include "document.hxx"
43 #include "tabvwsh.hxx"
44 #include "fillinfo.hxx"
45
46 #include <svx/fmview.hxx>
47
48 //==================================================================
49
50 // #i72502#
PrePrintDrawingLayer(long nLogStX,long nLogStY)51 Point ScOutputData::PrePrintDrawingLayer(long nLogStX, long nLogStY )
52 {
53 Rectangle aRect;
54 SCCOL nCol;
55 Point aOffset;
56 long nLayoutSign(bLayoutRTL ? -1 : 1);
57
58 for (nCol=0; nCol<nX1; nCol++)
59 aOffset.X() -= pDoc->GetColWidth( nCol, nTab ) * nLayoutSign;
60 aOffset.Y() -= pDoc->GetRowHeight( 0, nY1-1, nTab );
61
62 long nDataWidth = 0;
63 long nDataHeight = 0;
64 for (nCol=nX1; nCol<=nX2; nCol++)
65 nDataWidth += pDoc->GetColWidth( nCol, nTab );
66 nDataHeight += pDoc->GetRowHeight( nY1, nY2, nTab );
67
68 if ( bLayoutRTL )
69 aOffset.X() += nDataWidth;
70
71 aRect.Left() = aRect.Right() = -aOffset.X();
72 aRect.Top() = aRect.Bottom() = -aOffset.Y();
73
74 Point aMMOffset( aOffset );
75 aMMOffset.X() = (long)(aMMOffset.X() * HMM_PER_TWIPS);
76 aMMOffset.Y() = (long)(aMMOffset.Y() * HMM_PER_TWIPS);
77
78 if (!bMetaFile)
79 aMMOffset += Point( nLogStX, nLogStY );
80
81 for (nCol=nX1; nCol<=nX2; nCol++)
82 aRect.Right() += pDoc->GetColWidth( nCol, nTab );
83 aRect.Bottom() += pDoc->GetRowHeight( nY1, nY2, nTab );
84
85 aRect.Left() = (long) (aRect.Left() * HMM_PER_TWIPS);
86 aRect.Top() = (long) (aRect.Top() * HMM_PER_TWIPS);
87 aRect.Right() = (long) (aRect.Right() * HMM_PER_TWIPS);
88 aRect.Bottom() = (long) (aRect.Bottom() * HMM_PER_TWIPS);
89
90 if(pViewShell || pDrawView)
91 {
92 SdrView* pLocalDrawView = (pDrawView) ? pDrawView : pViewShell->GetSdrView();
93
94 if(pLocalDrawView)
95 {
96 // #i76114# MapMode has to be set because BeginDrawLayers uses GetPaintRegion
97 MapMode aOldMode = pDev->GetMapMode();
98 if (!bMetaFile)
99 pDev->SetMapMode( MapMode( MAP_100TH_MM, aMMOffset, aOldMode.GetScaleX(), aOldMode.GetScaleY() ) );
100
101 // #i74769# work with SdrPaintWindow directly
102 // #i76114# pass bDisableIntersect = true, because the intersection of the table area
103 // with the Window's paint region can be empty
104 Region aRectRegion(aRect);
105 mpTargetPaintWindow = pLocalDrawView->BeginDrawLayers(pDev, aRectRegion, true);
106 OSL_ENSURE(mpTargetPaintWindow, "BeginDrawLayers: Got no SdrPaintWindow (!)");
107
108 if (!bMetaFile)
109 pDev->SetMapMode( aOldMode );
110 }
111 }
112
113 return aMMOffset;
114 }
115
116 // #i72502#
PostPrintDrawingLayer(const Point & rMMOffset)117 void ScOutputData::PostPrintDrawingLayer(const Point& rMMOffset) // #i74768#
118 {
119 // #i74768# just use offset as in PrintDrawingLayer() to also get the form controls
120 // painted with offset
121 MapMode aOldMode = pDev->GetMapMode();
122
123 if (!bMetaFile)
124 {
125 pDev->SetMapMode( MapMode( MAP_100TH_MM, rMMOffset, aOldMode.GetScaleX(), aOldMode.GetScaleY() ) );
126 }
127
128 if(pViewShell || pDrawView)
129 {
130 SdrView* pLocalDrawView = (pDrawView) ? pDrawView : pViewShell->GetSdrView();
131
132 if(pLocalDrawView)
133 {
134 // #i74769# work with SdrPaintWindow directly
135 pLocalDrawView->EndDrawLayers(*mpTargetPaintWindow, true);
136 mpTargetPaintWindow = 0;
137 }
138 }
139
140 // #i74768#
141 if (!bMetaFile)
142 {
143 pDev->SetMapMode( aOldMode );
144 }
145 }
146
147 // #i72502#
PrintDrawingLayer(const sal_uInt16 nLayer,const Point & rMMOffset)148 void ScOutputData::PrintDrawingLayer(const sal_uInt16 nLayer, const Point& rMMOffset)
149 {
150 bool bHideAllDrawingLayer(false);
151
152 if(pViewShell || pDrawView)
153 {
154 SdrView* pLocalDrawView = (pDrawView) ? pDrawView : pViewShell->GetSdrView();
155
156 if(pLocalDrawView)
157 {
158 bHideAllDrawingLayer = pLocalDrawView->getHideOle() && pLocalDrawView->getHideChart()
159 && pLocalDrawView->getHideDraw() && pLocalDrawView->getHideFormControl();
160 }
161 }
162
163 // #109985#
164 if(bHideAllDrawingLayer || (!pDoc->GetDrawLayer()))
165 {
166 return;
167 }
168
169 MapMode aOldMode = pDev->GetMapMode();
170
171 if (!bMetaFile)
172 {
173 pDev->SetMapMode( MapMode( MAP_100TH_MM, rMMOffset, aOldMode.GetScaleX(), aOldMode.GetScaleY() ) );
174 }
175
176 // #109985#
177 DrawSelectiveObjects( nLayer );
178
179 if (!bMetaFile)
180 {
181 pDev->SetMapMode( aOldMode );
182 }
183 }
184
185 // #109985#
DrawSelectiveObjects(const sal_uInt16 nLayer)186 void ScOutputData::DrawSelectiveObjects(const sal_uInt16 nLayer)
187 {
188 ScDrawLayer* pModel = pDoc->GetDrawLayer();
189 if (!pModel)
190 return;
191
192 // #i46362# high contrast mode (and default text direction) must be handled
193 // by the application, so it's still needed when using DrawLayer().
194
195 SdrOutliner& rOutl = pModel->GetDrawOutliner();
196 rOutl.EnableAutoColor( bUseStyleColor );
197 rOutl.SetDefaultHorizontalTextDirection(
198 (EEHorizontalTextDirection)pDoc->GetEditTextDirection( nTab ) );
199
200 // #i69767# The hyphenator must be set (used to be before drawing a text shape with hyphenation).
201 // LinguMgr::GetHyphenator (EditEngine) uses a wrapper now that creates the real hyphenator on demand,
202 // so it's not a performance problem to call UseHyphenator even when it's not needed.
203
204 pModel->UseHyphenator();
205
206 sal_uLong nOldDrawMode = pDev->GetDrawMode();
207 if ( bUseStyleColor && Application::GetSettings().GetStyleSettings().GetHighContrastMode() )
208 {
209 pDev->SetDrawMode( nOldDrawMode | DRAWMODE_SETTINGSLINE | DRAWMODE_SETTINGSFILL |
210 DRAWMODE_SETTINGSTEXT | DRAWMODE_SETTINGSGRADIENT );
211 }
212
213 // #109985#
214 if(pViewShell || pDrawView)
215 {
216 SdrView* pLocalDrawView = (pDrawView) ? pDrawView : pViewShell->GetSdrView();
217
218 if(pLocalDrawView)
219 {
220 SdrPageView* pPageView = pLocalDrawView->GetSdrPageView();
221
222 if(pPageView)
223 {
224 pPageView->DrawLayer(sal::static_int_cast<SdrLayerID>(nLayer), pDev);
225 }
226 }
227 }
228
229 pDev->SetDrawMode(nOldDrawMode);
230
231 // #109985#
232 return;
233 }
234
235 // Teile nur fuer Bildschirm
236
237 // #109985#
DrawingSingle(const sal_uInt16 nLayer)238 void ScOutputData::DrawingSingle(const sal_uInt16 nLayer)
239 {
240 sal_Bool bHad = sal_False;
241 long nPosY = nScrY;
242 SCSIZE nArrY;
243 for (nArrY=1; nArrY+1<nArrCount; nArrY++)
244 {
245 RowInfo* pThisRowInfo = &pRowInfo[nArrY];
246
247 if ( pThisRowInfo->bChanged )
248 {
249 if (!bHad)
250 {
251 bHad = sal_True;
252 }
253 }
254 else if (bHad)
255 {
256 DrawSelectiveObjects( nLayer );
257 bHad = sal_False;
258 }
259 nPosY += pRowInfo[nArrY].nHeight;
260 }
261
262 if (bHad)
263 DrawSelectiveObjects( nLayer );
264 }
265
266
267
268
269