1# Doxyfile 1.5.8 2 3# This file describes the settings to be used by the documentation system 4# doxygen (www.doxygen.org) for a project 5# 6# All text after a hash (#) is considered a comment and will be ignored 7# The format is: 8# TAG = value [value, ...] 9# For lists items can also be appended using: 10# TAG += value [value, ...] 11# Values that contain spaces should be placed between quotes (" ") 12 13#--------------------------------------------------------------------------- 14# Project related configuration options 15#--------------------------------------------------------------------------- 16 17# This tag specifies the encoding used for all characters in the config file 18# that follow. The default is UTF-8 which is also the encoding used for all 19# text before the first occurrence of this tag. Doxygen uses libiconv (or the 20# iconv built into libc) for the transcoding. See 21# http://www.gnu.org/software/libiconv for the list of possible encodings. 22 23DOXYFILE_ENCODING = UTF-8 24 25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 26# by quotes) that should identify the project. 27 28PROJECT_NAME = gbuild 29 30# The PROJECT_NUMBER tag can be used to enter a project or revision number. 31# This could be handy for archiving the generated documentation or 32# if some version control system is used. 33 34PROJECT_NUMBER = 35 36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 37# base path where the generated documentation will be put. 38# If a relative path is entered, it will be relative to the location 39# where doxygen was started. If left blank the current directory will be used. 40 41OUTPUT_DIRECTORY = ./output 42 43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 44# 4096 sub-directories (in 2 levels) under the output directory of each output 45# format and will distribute the generated files over these directories. 46# Enabling this option can be useful when feeding doxygen a huge amount of 47# source files, where putting all generated files in the same directory would 48# otherwise cause performance problems for the file system. 49 50CREATE_SUBDIRS = NO 51 52# The OUTPUT_LANGUAGE tag is used to specify the language in which all 53# documentation generated by doxygen is written. Doxygen will use this 54# information to generate all constant output in the proper language. 55# The default language is English, other supported languages are: 56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 57# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 58# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 59# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 60# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, 61# Spanish, Swedish, and Ukrainian. 62 63OUTPUT_LANGUAGE = English 64 65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 66# include brief member descriptions after the members that are listed in 67# the file and class documentation (similar to JavaDoc). 68# Set to NO to disable this. 69 70BRIEF_MEMBER_DESC = YES 71 72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 73# the brief description of a member or function before the detailed description. 74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 75# brief descriptions will be completely suppressed. 76 77REPEAT_BRIEF = YES 78 79# This tag implements a quasi-intelligent brief description abbreviator 80# that is used to form the text in various listings. Each string 81# in this list, if found as the leading text of the brief description, will be 82# stripped from the text and the result after processing the whole list, is 83# used as the annotated text. Otherwise, the brief description is used as-is. 84# If left blank, the following values are used ("$name" is automatically 85# replaced with the name of the entity): "The $name class" "The $name widget" 86# "The $name file" "is" "provides" "specifies" "contains" 87# "represents" "a" "an" "the" 88 89ABBREVIATE_BRIEF = 90 91# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 92# Doxygen will generate a detailed section even if there is only a brief 93# description. 94 95ALWAYS_DETAILED_SEC = NO 96 97# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 98# inherited members of a class in the documentation of that class as if those 99# members were ordinary class members. Constructors, destructors and assignment 100# operators of the base classes will not be shown. 101 102INLINE_INHERITED_MEMB = YES 103 104# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 105# path before files name in the file list and in the header files. If set 106# to NO the shortest path that makes the file name unique will be used. 107 108FULL_PATH_NAMES = YES 109 110# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 111# can be used to strip a user-defined part of the path. Stripping is 112# only done if one of the specified strings matches the left-hand part of 113# the path. The tag can be used to show relative paths in the file list. 114# If left blank the directory from which doxygen is run is used as the 115# path to strip. 116 117STRIP_FROM_PATH = 118 119# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 120# the path mentioned in the documentation of a class, which tells 121# the reader which header file to include in order to use a class. 122# If left blank only the name of the header file containing the class 123# definition is used. Otherwise one should specify the include paths that 124# are normally passed to the compiler using the -I flag. 125 126STRIP_FROM_INC_PATH = 127 128# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 129# (but less readable) file names. This can be useful is your file systems 130# doesn't support long names like on DOS, Mac, or CD-ROM. 131 132SHORT_NAMES = NO 133 134# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 135# will interpret the first line (until the first dot) of a JavaDoc-style 136# comment as the brief description. If set to NO, the JavaDoc 137# comments will behave just like regular Qt-style comments 138# (thus requiring an explicit @brief command for a brief description.) 139 140JAVADOC_AUTOBRIEF = NO 141 142# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 143# interpret the first line (until the first dot) of a Qt-style 144# comment as the brief description. If set to NO, the comments 145# will behave just like regular Qt-style comments (thus requiring 146# an explicit \brief command for a brief description.) 147 148QT_AUTOBRIEF = NO 149 150# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 151# treat a multi-line C++ special comment block (i.e. a block of //! or /// 152# comments) as a brief description. This used to be the default behaviour. 153# The new default is to treat a multi-line C++ comment block as a detailed 154# description. Set this tag to YES if you prefer the old behaviour instead. 155 156MULTILINE_CPP_IS_BRIEF = NO 157 158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 159# member inherits the documentation from any documented member that it 160# re-implements. 161 162INHERIT_DOCS = YES 163 164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 165# a new page for each member. If set to NO, the documentation of a member will 166# be part of the file/class/namespace that contains it. 167 168SEPARATE_MEMBER_PAGES = NO 169 170# The TAB_SIZE tag can be used to set the number of spaces in a tab. 171# Doxygen uses this value to replace tabs by spaces in code fragments. 172 173TAB_SIZE = 4 174 175# This tag can be used to specify a number of aliases that acts 176# as commands in the documentation. An alias has the form "name=value". 177# For example adding "sideeffect=\par Side Effects:\n" will allow you to 178# put the command \sideeffect (or @sideeffect) in the documentation, which 179# will result in a user-defined paragraph with heading "Side Effects:". 180# You can put \n's in the value part of an alias to insert newlines. 181 182ALIASES = 183 184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 185# sources only. Doxygen will then generate output that is more tailored for C. 186# For instance, some of the names that are used will be different. The list 187# of all members will be omitted, etc. 188 189OPTIMIZE_OUTPUT_FOR_C = NO 190 191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 192# sources only. Doxygen will then generate output that is more tailored for 193# Java. For instance, namespaces will be presented as packages, qualified 194# scopes will look different, etc. 195 196OPTIMIZE_OUTPUT_JAVA = NO 197 198# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 199# sources only. Doxygen will then generate output that is more tailored for 200# Fortran. 201 202OPTIMIZE_FOR_FORTRAN = NO 203 204# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 205# sources. Doxygen will then generate output that is tailored for 206# VHDL. 207 208OPTIMIZE_OUTPUT_VHDL = NO 209 210# Doxygen selects the parser to use depending on the extension of the files it parses. 211# With this tag you can assign which parser to use for a given extension. 212# Doxygen has a built-in mapping, but you can override or extend it using this tag. 213# The format is ext=language, where ext is a file extension, and language is one of 214# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, 215# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat 216# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), 217# use: inc=Fortran f=C 218 219EXTENSION_MAPPING = mk=IDL 220 221# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 222# to include (a tag file for) the STL sources as input, then you should 223# set this tag to YES in order to let doxygen match functions declarations and 224# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 225# func(std::string) {}). This also make the inheritance and collaboration 226# diagrams that involve STL classes more complete and accurate. 227 228BUILTIN_STL_SUPPORT = NO 229 230# If you use Microsoft's C++/CLI language, you should set this option to YES to 231# enable parsing support. 232 233CPP_CLI_SUPPORT = NO 234 235# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 236# Doxygen will parse them like normal C++ but will assume all classes use public 237# instead of private inheritance when no explicit protection keyword is present. 238 239SIP_SUPPORT = NO 240 241# For Microsoft's IDL there are propget and propput attributes to indicate getter 242# and setter methods for a property. Setting this option to YES (the default) 243# will make doxygen to replace the get and set methods by a property in the 244# documentation. This will only work if the methods are indeed getting or 245# setting a simple type. If this is not the case, or you want to show the 246# methods anyway, you should set this option to NO. 247 248IDL_PROPERTY_SUPPORT = YES 249 250# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 251# tag is set to YES, then doxygen will reuse the documentation of the first 252# member in the group (if any) for the other members of the group. By default 253# all members of a group must be documented explicitly. 254 255DISTRIBUTE_GROUP_DOC = NO 256 257# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 258# the same type (for instance a group of public functions) to be put as a 259# subgroup of that type (e.g. under the Public Functions section). Set it to 260# NO to prevent subgrouping. Alternatively, this can be done per class using 261# the \nosubgrouping command. 262 263SUBGROUPING = YES 264 265# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 266# is documented as struct, union, or enum with the name of the typedef. So 267# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 268# with name TypeT. When disabled the typedef will appear as a member of a file, 269# namespace, or class. And the struct will be named TypeS. This can typically 270# be useful for C code in case the coding convention dictates that all compound 271# types are typedef'ed and only the typedef is referenced, never the tag name. 272 273TYPEDEF_HIDES_STRUCT = NO 274 275# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 276# determine which symbols to keep in memory and which to flush to disk. 277# When the cache is full, less often used symbols will be written to disk. 278# For small to medium size projects (<1000 input files) the default value is 279# probably good enough. For larger projects a too small cache size can cause 280# doxygen to be busy swapping symbols to and from disk most of the time 281# causing a significant performance penality. 282# If the system has enough physical memory increasing the cache will improve the 283# performance by keeping more symbols in memory. Note that the value works on 284# a logarithmic scale so increasing the size by one will rougly double the 285# memory usage. The cache size is given by this formula: 286# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 287# corresponding to a cache size of 2^16 = 65536 symbols 288 289SYMBOL_CACHE_SIZE = 0 290 291#--------------------------------------------------------------------------- 292# Build related configuration options 293#--------------------------------------------------------------------------- 294 295# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 296# documentation are documented, even if no documentation was available. 297# Private class members and static file members will be hidden unless 298# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES 299 300EXTRACT_ALL = YES 301 302# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 303# will be included in the documentation. 304 305EXTRACT_PRIVATE = YES 306 307# If the EXTRACT_STATIC tag is set to YES all static members of a file 308# will be included in the documentation. 309 310EXTRACT_STATIC = YES 311 312# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 313# defined locally in source files will be included in the documentation. 314# If set to NO only classes defined in header files are included. 315 316EXTRACT_LOCAL_CLASSES = YES 317 318# This flag is only useful for Objective-C code. When set to YES local 319# methods, which are defined in the implementation section but not in 320# the interface are included in the documentation. 321# If set to NO (the default) only methods in the interface are included. 322 323EXTRACT_LOCAL_METHODS = NO 324 325# If this flag is set to YES, the members of anonymous namespaces will be 326# extracted and appear in the documentation as a namespace called 327# 'anonymous_namespace{file}', where file will be replaced with the base 328# name of the file that contains the anonymous namespace. By default 329# anonymous namespace are hidden. 330 331EXTRACT_ANON_NSPACES = NO 332 333# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 334# undocumented members of documented classes, files or namespaces. 335# If set to NO (the default) these members will be included in the 336# various overviews, but no documentation section is generated. 337# This option has no effect if EXTRACT_ALL is enabled. 338 339HIDE_UNDOC_MEMBERS = NO 340 341# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 342# undocumented classes that are normally visible in the class hierarchy. 343# If set to NO (the default) these classes will be included in the various 344# overviews. This option has no effect if EXTRACT_ALL is enabled. 345 346HIDE_UNDOC_CLASSES = NO 347 348# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 349# friend (class|struct|union) declarations. 350# If set to NO (the default) these declarations will be included in the 351# documentation. 352 353HIDE_FRIEND_COMPOUNDS = NO 354 355# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 356# documentation blocks found inside the body of a function. 357# If set to NO (the default) these blocks will be appended to the 358# function's detailed documentation block. 359 360HIDE_IN_BODY_DOCS = NO 361 362# The INTERNAL_DOCS tag determines if documentation 363# that is typed after a \internal command is included. If the tag is set 364# to NO (the default) then the documentation will be excluded. 365# Set it to YES to include the internal documentation. 366 367INTERNAL_DOCS = NO 368 369# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 370# file names in lower-case letters. If set to YES upper-case letters are also 371# allowed. This is useful if you have classes or files whose names only differ 372# in case and if your file system supports case sensitive file names. Windows 373# and Mac users are advised to set this option to NO. 374 375CASE_SENSE_NAMES = YES 376 377# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 378# will show members with their full class and namespace scopes in the 379# documentation. If set to YES the scope will be hidden. 380 381HIDE_SCOPE_NAMES = NO 382 383# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 384# will put a list of the files that are included by a file in the documentation 385# of that file. 386 387SHOW_INCLUDE_FILES = YES 388 389# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 390# is inserted in the documentation for inline members. 391 392INLINE_INFO = YES 393 394# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 395# will sort the (detailed) documentation of file and class members 396# alphabetically by member name. If set to NO the members will appear in 397# declaration order. 398 399SORT_MEMBER_DOCS = YES 400 401# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 402# brief documentation of file, namespace and class members alphabetically 403# by member name. If set to NO (the default) the members will appear in 404# declaration order. 405 406SORT_BRIEF_DOCS = NO 407 408# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 409# hierarchy of group names into alphabetical order. If set to NO (the default) 410# the group names will appear in their defined order. 411 412SORT_GROUP_NAMES = NO 413 414# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 415# sorted by fully-qualified names, including namespaces. If set to 416# NO (the default), the class list will be sorted only by class name, 417# not including the namespace part. 418# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 419# Note: This option applies only to the class list, not to the 420# alphabetical list. 421 422SORT_BY_SCOPE_NAME = NO 423 424# The GENERATE_TODOLIST tag can be used to enable (YES) or 425# disable (NO) the todo list. This list is created by putting \todo 426# commands in the documentation. 427 428GENERATE_TODOLIST = YES 429 430# The GENERATE_TESTLIST tag can be used to enable (YES) or 431# disable (NO) the test list. This list is created by putting \test 432# commands in the documentation. 433 434GENERATE_TESTLIST = YES 435 436# The GENERATE_BUGLIST tag can be used to enable (YES) or 437# disable (NO) the bug list. This list is created by putting \bug 438# commands in the documentation. 439 440GENERATE_BUGLIST = YES 441 442# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 443# disable (NO) the deprecated list. This list is created by putting 444# \deprecated commands in the documentation. 445 446GENERATE_DEPRECATEDLIST= YES 447 448# The ENABLED_SECTIONS tag can be used to enable conditional 449# documentation sections, marked by \if sectionname ... \endif. 450 451ENABLED_SECTIONS = 452 453# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 454# the initial value of a variable or define consists of for it to appear in 455# the documentation. If the initializer consists of more lines than specified 456# here it will be hidden. Use a value of 0 to hide initializers completely. 457# The appearance of the initializer of individual variables and defines in the 458# documentation can be controlled using \showinitializer or \hideinitializer 459# command in the documentation regardless of this setting. 460 461MAX_INITIALIZER_LINES = 30 462 463# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 464# at the bottom of the documentation of classes and structs. If set to YES the 465# list will mention the files that were used to generate the documentation. 466 467SHOW_USED_FILES = YES 468 469# If the sources in your project are distributed over multiple directories 470# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 471# in the documentation. The default is NO. 472 473SHOW_DIRECTORIES = NO 474 475# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 476# This will remove the Files entry from the Quick Index and from the 477# Folder Tree View (if specified). The default is YES. 478 479SHOW_FILES = YES 480 481# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 482# Namespaces page. 483# This will remove the Namespaces entry from the Quick Index 484# and from the Folder Tree View (if specified). The default is YES. 485 486SHOW_NAMESPACES = YES 487 488# The FILE_VERSION_FILTER tag can be used to specify a program or script that 489# doxygen should invoke to get the current version for each file (typically from 490# the version control system). Doxygen will invoke the program by executing (via 491# popen()) the command <command> <input-file>, where <command> is the value of 492# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 493# provided by doxygen. Whatever the program writes to standard output 494# is used as the file version. See the manual for examples. 495 496FILE_VERSION_FILTER = 497 498# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 499# doxygen. The layout file controls the global structure of the generated output files 500# in an output format independent way. The create the layout file that represents 501# doxygen's defaults, run doxygen with the -l option. You can optionally specify a 502# file name after the option, if omitted DoxygenLayout.xml will be used as the name 503# of the layout file. 504 505LAYOUT_FILE = 506 507#--------------------------------------------------------------------------- 508# configuration options related to warning and progress messages 509#--------------------------------------------------------------------------- 510 511# The QUIET tag can be used to turn on/off the messages that are generated 512# by doxygen. Possible values are YES and NO. If left blank NO is used. 513 514QUIET = NO 515 516# The WARNINGS tag can be used to turn on/off the warning messages that are 517# generated by doxygen. Possible values are YES and NO. If left blank 518# NO is used. 519 520WARNINGS = YES 521 522# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 523# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 524# automatically be disabled. 525 526WARN_IF_UNDOCUMENTED = YES 527 528# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 529# potential errors in the documentation, such as not documenting some 530# parameters in a documented function, or documenting parameters that 531# don't exist or using markup commands wrongly. 532 533WARN_IF_DOC_ERROR = YES 534 535# This WARN_NO_PARAMDOC option can be abled to get warnings for 536# functions that are documented, but have no documentation for their parameters 537# or return value. If set to NO (the default) doxygen will only warn about 538# wrong or incomplete parameter documentation, but not about the absence of 539# documentation. 540 541WARN_NO_PARAMDOC = NO 542 543# The WARN_FORMAT tag determines the format of the warning messages that 544# doxygen can produce. The string should contain the $file, $line, and $text 545# tags, which will be replaced by the file and line number from which the 546# warning originated and the warning text. Optionally the format may contain 547# $version, which will be replaced by the version of the file (if it could 548# be obtained via FILE_VERSION_FILTER) 549 550WARN_FORMAT = "$file:$line: $text" 551 552# The WARN_LOGFILE tag can be used to specify a file to which warning 553# and error messages should be written. If left blank the output is written 554# to stderr. 555 556WARN_LOGFILE = 557 558#--------------------------------------------------------------------------- 559# configuration options related to the input files 560#--------------------------------------------------------------------------- 561 562# The INPUT tag can be used to specify the files and/or directories that contain 563# documented source files. You may enter file names like "myfile.cpp" or 564# directories like "/usr/src/myproject". Separate the files or directories 565# with spaces. 566 567INPUT = solenv/gbuild 568 569# This tag can be used to specify the character encoding of the source files 570# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 571# also the default input encoding. Doxygen uses libiconv (or the iconv built 572# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 573# the list of possible encodings. 574 575INPUT_ENCODING = UTF-8 576 577# If the value of the INPUT tag contains directories, you can use the 578# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 579# and *.h) to filter out the source-files in the directories. If left 580# blank the following patterns are tested: 581# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 582# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 583 584FILE_PATTERNS = *.mk 585 586# The RECURSIVE tag can be used to turn specify whether or not subdirectories 587# should be searched for input files as well. Possible values are YES and NO. 588# If left blank NO is used. 589 590RECURSIVE = YES 591 592# The EXCLUDE tag can be used to specify files and/or directories that should 593# excluded from the INPUT source files. This way you can easily exclude a 594# subdirectory from a directory tree whose root is specified with the INPUT tag. 595 596EXCLUDE = 597 598# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 599# directories that are symbolic links (a Unix filesystem feature) are excluded 600# from the input. 601 602EXCLUDE_SYMLINKS = NO 603 604# If the value of the INPUT tag contains directories, you can use the 605# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 606# certain files from those directories. Note that the wildcards are matched 607# against the file with absolute path, so to exclude all test directories 608# for example use the pattern */test/* 609 610EXCLUDE_PATTERNS = 611 612# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 613# (namespaces, classes, functions, etc.) that should be excluded from the 614# output. The symbol name can be a fully qualified name, a word, or if the 615# wildcard * is used, a substring. Examples: ANamespace, AClass, 616# AClass::ANamespace, ANamespace::*Test 617 618EXCLUDE_SYMBOLS = 619 620# The EXAMPLE_PATH tag can be used to specify one or more files or 621# directories that contain example code fragments that are included (see 622# the \include command). 623 624EXAMPLE_PATH = 625 626# If the value of the EXAMPLE_PATH tag contains directories, you can use the 627# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 628# and *.h) to filter out the source-files in the directories. If left 629# blank all files are included. 630 631EXAMPLE_PATTERNS = 632 633# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 634# searched for input files to be used with the \include or \dontinclude 635# commands irrespective of the value of the RECURSIVE tag. 636# Possible values are YES and NO. If left blank NO is used. 637 638EXAMPLE_RECURSIVE = NO 639 640# The IMAGE_PATH tag can be used to specify one or more files or 641# directories that contain image that are included in the documentation (see 642# the \image command). 643 644IMAGE_PATH = 645 646# The INPUT_FILTER tag can be used to specify a program that doxygen should 647# invoke to filter for each input file. Doxygen will invoke the filter program 648# by executing (via popen()) the command <filter> <input-file>, where <filter> 649# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 650# input file. Doxygen will then use the output that the filter program writes 651# to standard output. 652# If FILTER_PATTERNS is specified, this tag will be 653# ignored. 654 655INPUT_FILTER = 656 657# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 658# basis. 659# Doxygen will compare the file name with each pattern and apply the 660# filter if there is a match. 661# The filters are a list of the form: 662# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 663# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 664# is applied to all files. 665 666FILTER_PATTERNS = 667 668# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 669# INPUT_FILTER) will be used to filter the input files when producing source 670# files to browse (i.e. when SOURCE_BROWSER is set to YES). 671 672FILTER_SOURCE_FILES = NO 673 674#--------------------------------------------------------------------------- 675# configuration options related to source browsing 676#--------------------------------------------------------------------------- 677 678# If the SOURCE_BROWSER tag is set to YES then a list of source files will 679# be generated. Documented entities will be cross-referenced with these sources. 680# Note: To get rid of all source code in the generated output, make sure also 681# VERBATIM_HEADERS is set to NO. 682 683SOURCE_BROWSER = NO 684 685# Setting the INLINE_SOURCES tag to YES will include the body 686# of functions and classes directly in the documentation. 687 688INLINE_SOURCES = NO 689 690# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 691# doxygen to hide any special comment blocks from generated source code 692# fragments. Normal C and C++ comments will always remain visible. 693 694STRIP_CODE_COMMENTS = YES 695 696# If the REFERENCED_BY_RELATION tag is set to YES 697# then for each documented function all documented 698# functions referencing it will be listed. 699 700REFERENCED_BY_RELATION = NO 701 702# If the REFERENCES_RELATION tag is set to YES 703# then for each documented function all documented entities 704# called/used by that function will be listed. 705 706REFERENCES_RELATION = NO 707 708# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 709# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 710# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 711# link to the source code. 712# Otherwise they will link to the documentation. 713 714REFERENCES_LINK_SOURCE = YES 715 716# If the USE_HTAGS tag is set to YES then the references to source code 717# will point to the HTML generated by the htags(1) tool instead of doxygen 718# built-in source browser. The htags tool is part of GNU's global source 719# tagging system (see http://www.gnu.org/software/global/global.html). You 720# will need version 4.8.6 or higher. 721 722USE_HTAGS = NO 723 724# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 725# will generate a verbatim copy of the header file for each class for 726# which an include is specified. Set to NO to disable this. 727 728VERBATIM_HEADERS = YES 729 730#--------------------------------------------------------------------------- 731# configuration options related to the alphabetical class index 732#--------------------------------------------------------------------------- 733 734# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 735# of all compounds will be generated. Enable this if the project 736# contains a lot of classes, structs, unions or interfaces. 737 738ALPHABETICAL_INDEX = NO 739 740# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 741# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 742# in which this list will be split (can be a number in the range [1..20]) 743 744COLS_IN_ALPHA_INDEX = 5 745 746# In case all classes in a project start with a common prefix, all 747# classes will be put under the same header in the alphabetical index. 748# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 749# should be ignored while generating the index headers. 750 751IGNORE_PREFIX = 752 753#--------------------------------------------------------------------------- 754# configuration options related to the HTML output 755#--------------------------------------------------------------------------- 756 757# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 758# generate HTML output. 759 760GENERATE_HTML = YES 761 762# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 763# If a relative path is entered the value of OUTPUT_DIRECTORY will be 764# put in front of it. If left blank `html' will be used as the default path. 765 766HTML_OUTPUT = html 767 768# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 769# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 770# doxygen will generate files with .html extension. 771 772HTML_FILE_EXTENSION = .html 773 774# The HTML_HEADER tag can be used to specify a personal HTML header for 775# each generated HTML page. If it is left blank doxygen will generate a 776# standard header. 777 778HTML_HEADER = 779 780# The HTML_FOOTER tag can be used to specify a personal HTML footer for 781# each generated HTML page. If it is left blank doxygen will generate a 782# standard footer. 783 784HTML_FOOTER = 785 786# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 787# style sheet that is used by each HTML page. It can be used to 788# fine-tune the look of the HTML output. If the tag is left blank doxygen 789# will generate a default style sheet. Note that doxygen will try to copy 790# the style sheet file to the HTML output directory, so don't put your own 791# stylesheet in the HTML output directory as well, or it will be erased! 792 793HTML_STYLESHEET = 794 795# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 796# files or namespaces will be aligned in HTML using tables. If set to 797# NO a bullet list will be used. 798 799HTML_ALIGN_MEMBERS = YES 800 801# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 802# documentation will contain sections that can be hidden and shown after the 803# page has loaded. For this to work a browser that supports 804# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 805# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). 806 807HTML_DYNAMIC_SECTIONS = NO 808 809# If the GENERATE_DOCSET tag is set to YES, additional index files 810# will be generated that can be used as input for Apple's Xcode 3 811# integrated development environment, introduced with OSX 10.5 (Leopard). 812# To create a documentation set, doxygen will generate a Makefile in the 813# HTML output directory. Running make will produce the docset in that 814# directory and running "make install" will install the docset in 815# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 816# it at startup. 817# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. 818 819GENERATE_DOCSET = NO 820 821# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 822# feed. A documentation feed provides an umbrella under which multiple 823# documentation sets from a single provider (such as a company or product suite) 824# can be grouped. 825 826DOCSET_FEEDNAME = "Doxygen generated docs" 827 828# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 829# should uniquely identify the documentation set bundle. This should be a 830# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 831# will append .docset to the name. 832 833DOCSET_BUNDLE_ID = org.openoffice.gbuild 834 835# If the GENERATE_HTMLHELP tag is set to YES, additional index files 836# will be generated that can be used as input for tools like the 837# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 838# of the generated HTML documentation. 839 840GENERATE_HTMLHELP = NO 841 842# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 843# be used to specify the file name of the resulting .chm file. You 844# can add a path in front of the file if the result should not be 845# written to the html output directory. 846 847CHM_FILE = 848 849# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 850# be used to specify the location (absolute path including file name) of 851# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 852# the HTML help compiler on the generated index.hhp. 853 854HHC_LOCATION = 855 856# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 857# controls if a separate .chi index file is generated (YES) or that 858# it should be included in the master .chm file (NO). 859 860GENERATE_CHI = NO 861 862# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 863# is used to encode HtmlHelp index (hhk), content (hhc) and project file 864# content. 865 866CHM_INDEX_ENCODING = 867 868# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 869# controls whether a binary table of contents is generated (YES) or a 870# normal table of contents (NO) in the .chm file. 871 872BINARY_TOC = NO 873 874# The TOC_EXPAND flag can be set to YES to add extra items for group members 875# to the contents of the HTML help documentation and to the tree view. 876 877TOC_EXPAND = NO 878 879# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 880# are set, an additional index file will be generated that can be used as input for 881# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 882# HTML documentation. 883 884GENERATE_QHP = NO 885 886# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 887# be used to specify the file name of the resulting .qch file. 888# The path specified is relative to the HTML output folder. 889 890QCH_FILE = 891 892# The QHP_NAMESPACE tag specifies the namespace to use when generating 893# Qt Help Project output. For more information please see 894# http://doc.trolltech.com/qthelpproject.html#namespace 895 896QHP_NAMESPACE = 897 898# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 899# Qt Help Project output. For more information please see 900# http://doc.trolltech.com/qthelpproject.html#virtual-folders 901 902QHP_VIRTUAL_FOLDER = doc 903 904# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. 905# For more information please see 906# http://doc.trolltech.com/qthelpproject.html#custom-filters 907 908QHP_CUST_FILTER_NAME = 909 910# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see 911# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. 912 913QHP_CUST_FILTER_ATTRS = 914 915# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's 916# filter section matches. 917# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. 918 919QHP_SECT_FILTER_ATTRS = 920 921# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 922# be used to specify the location of Qt's qhelpgenerator. 923# If non-empty doxygen will try to run qhelpgenerator on the generated 924# .qhp file. 925 926QHG_LOCATION = 927 928# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 929# top of each HTML page. The value NO (the default) enables the index and 930# the value YES disables it. 931 932DISABLE_INDEX = NO 933 934# This tag can be used to set the number of enum values (range [1..20]) 935# that doxygen will group on one line in the generated HTML documentation. 936 937ENUM_VALUES_PER_LINE = 4 938 939# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 940# structure should be generated to display hierarchical information. 941# If the tag value is set to FRAME, a side panel will be generated 942# containing a tree-like index structure (just like the one that 943# is generated for HTML Help). For this to work a browser that supports 944# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 945# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 946# probably better off using the HTML help feature. Other possible values 947# for this tag are: HIERARCHIES, which will generate the Groups, Directories, 948# and Class Hierarchy pages using a tree view instead of an ordered list; 949# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 950# disables this behavior completely. For backwards compatibility with previous 951# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 952# respectively. 953 954GENERATE_TREEVIEW = NONE 955 956# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 957# used to set the initial width (in pixels) of the frame in which the tree 958# is shown. 959 960TREEVIEW_WIDTH = 250 961 962# Use this tag to change the font size of Latex formulas included 963# as images in the HTML documentation. The default is 10. Note that 964# when you change the font size after a successful doxygen run you need 965# to manually remove any form_*.png images from the HTML output directory 966# to force them to be regenerated. 967 968FORMULA_FONTSIZE = 10 969 970#--------------------------------------------------------------------------- 971# configuration options related to the LaTeX output 972#--------------------------------------------------------------------------- 973 974# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 975# generate Latex output. 976 977GENERATE_LATEX = YES 978 979# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 980# If a relative path is entered the value of OUTPUT_DIRECTORY will be 981# put in front of it. If left blank `latex' will be used as the default path. 982 983LATEX_OUTPUT = latex 984 985# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 986# invoked. If left blank `latex' will be used as the default command name. 987 988LATEX_CMD_NAME = latex 989 990# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 991# generate index for LaTeX. If left blank `makeindex' will be used as the 992# default command name. 993 994MAKEINDEX_CMD_NAME = makeindex 995 996# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 997# LaTeX documents. This may be useful for small projects and may help to 998# save some trees in general. 999 1000COMPACT_LATEX = NO 1001 1002# The PAPER_TYPE tag can be used to set the paper type that is used 1003# by the printer. Possible values are: a4, a4wide, letter, legal and 1004# executive. If left blank a4wide will be used. 1005 1006PAPER_TYPE = a4wide 1007 1008# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 1009# packages that should be included in the LaTeX output. 1010 1011EXTRA_PACKAGES = 1012 1013# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 1014# the generated latex document. The header should contain everything until 1015# the first chapter. If it is left blank doxygen will generate a 1016# standard header. Notice: only use this tag if you know what you are doing! 1017 1018LATEX_HEADER = 1019 1020# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 1021# is prepared for conversion to pdf (using ps2pdf). The pdf file will 1022# contain links (just like the HTML output) instead of page references 1023# This makes the output suitable for online browsing using a pdf viewer. 1024 1025PDF_HYPERLINKS = YES 1026 1027# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 1028# plain latex in the generated Makefile. Set this option to YES to get a 1029# higher quality PDF documentation. 1030 1031USE_PDFLATEX = YES 1032 1033# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 1034# command to the generated LaTeX files. This will instruct LaTeX to keep 1035# running if errors occur, instead of asking the user for help. 1036# This option is also used when generating formulas in HTML. 1037 1038LATEX_BATCHMODE = NO 1039 1040# If LATEX_HIDE_INDICES is set to YES then doxygen will not 1041# include the index chapters (such as File Index, Compound Index, etc.) 1042# in the output. 1043 1044LATEX_HIDE_INDICES = NO 1045 1046#--------------------------------------------------------------------------- 1047# configuration options related to the RTF output 1048#--------------------------------------------------------------------------- 1049 1050# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 1051# The RTF output is optimized for Word 97 and may not look very pretty with 1052# other RTF readers or editors. 1053 1054GENERATE_RTF = NO 1055 1056# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 1057# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1058# put in front of it. If left blank `rtf' will be used as the default path. 1059 1060RTF_OUTPUT = rtf 1061 1062# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 1063# RTF documents. This may be useful for small projects and may help to 1064# save some trees in general. 1065 1066COMPACT_RTF = NO 1067 1068# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 1069# will contain hyperlink fields. The RTF file will 1070# contain links (just like the HTML output) instead of page references. 1071# This makes the output suitable for online browsing using WORD or other 1072# programs which support those fields. 1073# Note: wordpad (write) and others do not support links. 1074 1075RTF_HYPERLINKS = NO 1076 1077# Load stylesheet definitions from file. Syntax is similar to doxygen's 1078# config file, i.e. a series of assignments. You only have to provide 1079# replacements, missing definitions are set to their default value. 1080 1081RTF_STYLESHEET_FILE = 1082 1083# Set optional variables used in the generation of an rtf document. 1084# Syntax is similar to doxygen's config file. 1085 1086RTF_EXTENSIONS_FILE = 1087 1088#--------------------------------------------------------------------------- 1089# configuration options related to the man page output 1090#--------------------------------------------------------------------------- 1091 1092# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 1093# generate man pages 1094 1095GENERATE_MAN = NO 1096 1097# The MAN_OUTPUT tag is used to specify where the man pages will be put. 1098# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1099# put in front of it. If left blank `man' will be used as the default path. 1100 1101MAN_OUTPUT = man 1102 1103# The MAN_EXTENSION tag determines the extension that is added to 1104# the generated man pages (default is the subroutine's section .3) 1105 1106MAN_EXTENSION = .3 1107 1108# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 1109# then it will generate one additional man file for each entity 1110# documented in the real man page(s). These additional files 1111# only source the real man page, but without them the man command 1112# would be unable to find the correct page. The default is NO. 1113 1114MAN_LINKS = NO 1115 1116#--------------------------------------------------------------------------- 1117# configuration options related to the XML output 1118#--------------------------------------------------------------------------- 1119 1120# If the GENERATE_XML tag is set to YES Doxygen will 1121# generate an XML file that captures the structure of 1122# the code including all documentation. 1123 1124GENERATE_XML = NO 1125 1126# The XML_OUTPUT tag is used to specify where the XML pages will be put. 1127# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1128# put in front of it. If left blank `xml' will be used as the default path. 1129 1130XML_OUTPUT = xml 1131 1132# The XML_SCHEMA tag can be used to specify an XML schema, 1133# which can be used by a validating XML parser to check the 1134# syntax of the XML files. 1135 1136XML_SCHEMA = 1137 1138# The XML_DTD tag can be used to specify an XML DTD, 1139# which can be used by a validating XML parser to check the 1140# syntax of the XML files. 1141 1142XML_DTD = 1143 1144# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 1145# dump the program listings (including syntax highlighting 1146# and cross-referencing information) to the XML output. Note that 1147# enabling this will significantly increase the size of the XML output. 1148 1149XML_PROGRAMLISTING = YES 1150 1151#--------------------------------------------------------------------------- 1152# configuration options for the AutoGen Definitions output 1153#--------------------------------------------------------------------------- 1154 1155# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 1156# generate an AutoGen Definitions (see autogen.sf.net) file 1157# that captures the structure of the code including all 1158# documentation. Note that this feature is still experimental 1159# and incomplete at the moment. 1160 1161GENERATE_AUTOGEN_DEF = NO 1162 1163#--------------------------------------------------------------------------- 1164# configuration options related to the Perl module output 1165#--------------------------------------------------------------------------- 1166 1167# If the GENERATE_PERLMOD tag is set to YES Doxygen will 1168# generate a Perl module file that captures the structure of 1169# the code including all documentation. Note that this 1170# feature is still experimental and incomplete at the 1171# moment. 1172 1173GENERATE_PERLMOD = NO 1174 1175# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 1176# the necessary Makefile rules, Perl scripts and LaTeX code to be able 1177# to generate PDF and DVI output from the Perl module output. 1178 1179PERLMOD_LATEX = NO 1180 1181# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 1182# nicely formatted so it can be parsed by a human reader. 1183# This is useful 1184# if you want to understand what is going on. 1185# On the other hand, if this 1186# tag is set to NO the size of the Perl module output will be much smaller 1187# and Perl will parse it just the same. 1188 1189PERLMOD_PRETTY = YES 1190 1191# The names of the make variables in the generated doxyrules.make file 1192# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 1193# This is useful so different doxyrules.make files included by the same 1194# Makefile don't overwrite each other's variables. 1195 1196PERLMOD_MAKEVAR_PREFIX = 1197 1198#--------------------------------------------------------------------------- 1199# Configuration options related to the preprocessor 1200#--------------------------------------------------------------------------- 1201 1202# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 1203# evaluate all C-preprocessor directives found in the sources and include 1204# files. 1205 1206ENABLE_PREPROCESSING = YES 1207 1208# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 1209# names in the source code. If set to NO (the default) only conditional 1210# compilation will be performed. Macro expansion can be done in a controlled 1211# way by setting EXPAND_ONLY_PREDEF to YES. 1212 1213MACRO_EXPANSION = NO 1214 1215# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 1216# then the macro expansion is limited to the macros specified with the 1217# PREDEFINED and EXPAND_AS_DEFINED tags. 1218 1219EXPAND_ONLY_PREDEF = NO 1220 1221# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 1222# in the INCLUDE_PATH (see below) will be search if a #include is found. 1223 1224SEARCH_INCLUDES = YES 1225 1226# The INCLUDE_PATH tag can be used to specify one or more directories that 1227# contain include files that are not input files but should be processed by 1228# the preprocessor. 1229 1230INCLUDE_PATH = 1231 1232# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 1233# patterns (like *.h and *.hpp) to filter out the header-files in the 1234# directories. If left blank, the patterns specified with FILE_PATTERNS will 1235# be used. 1236 1237INCLUDE_FILE_PATTERNS = 1238 1239# The PREDEFINED tag can be used to specify one or more macro names that 1240# are defined before the preprocessor is started (similar to the -D option of 1241# gcc). The argument of the tag is a list of macros of the form: name 1242# or name=definition (no spaces). If the definition and the = are 1243# omitted =1 is assumed. To prevent a macro definition from being 1244# undefined via #undef or recursively expanded use the := operator 1245# instead of the = operator. 1246 1247PREDEFINED = 1248 1249# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 1250# this tag can be used to specify a list of macro names that should be expanded. 1251# The macro definition that is found in the sources will be used. 1252# Use the PREDEFINED tag if you want to use a different macro definition. 1253 1254EXPAND_AS_DEFINED = 1255 1256# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 1257# doxygen's preprocessor will remove all function-like macros that are alone 1258# on a line, have an all uppercase name, and do not end with a semicolon. Such 1259# function macros are typically used for boiler-plate code, and will confuse 1260# the parser if not removed. 1261 1262SKIP_FUNCTION_MACROS = YES 1263 1264#--------------------------------------------------------------------------- 1265# Configuration::additions related to external references 1266#--------------------------------------------------------------------------- 1267 1268# The TAGFILES option can be used to specify one or more tagfiles. 1269# Optionally an initial location of the external documentation 1270# can be added for each tagfile. The format of a tag file without 1271# this location is as follows: 1272# 1273# TAGFILES = file1 file2 ... 1274# Adding location for the tag files is done as follows: 1275# 1276# TAGFILES = file1=loc1 "file2 = loc2" ... 1277# where "loc1" and "loc2" can be relative or absolute paths or 1278# URLs. If a location is present for each tag, the installdox tool 1279# does not have to be run to correct the links. 1280# Note that each tag file must have a unique name 1281# (where the name does NOT include the path) 1282# If a tag file is not located in the directory in which doxygen 1283# is run, you must also specify the path to the tagfile here. 1284 1285TAGFILES = 1286 1287# When a file name is specified after GENERATE_TAGFILE, doxygen will create 1288# a tag file that is based on the input files it reads. 1289 1290GENERATE_TAGFILE = 1291 1292# If the ALLEXTERNALS tag is set to YES all external classes will be listed 1293# in the class index. If set to NO only the inherited external classes 1294# will be listed. 1295 1296ALLEXTERNALS = NO 1297 1298# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 1299# in the modules index. If set to NO, only the current project's groups will 1300# be listed. 1301 1302EXTERNAL_GROUPS = YES 1303 1304# The PERL_PATH should be the absolute path and name of the perl script 1305# interpreter (i.e. the result of `which perl'). 1306 1307PERL_PATH = /usr/bin/perl 1308 1309#--------------------------------------------------------------------------- 1310# Configuration options related to the dot tool 1311#--------------------------------------------------------------------------- 1312 1313# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 1314# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 1315# or super classes. Setting the tag to NO turns the diagrams off. Note that 1316# this option is superseded by the HAVE_DOT option below. This is only a 1317# fallback. It is recommended to install and use dot, since it yields more 1318# powerful graphs. 1319 1320CLASS_DIAGRAMS = YES 1321 1322# You can define message sequence charts within doxygen comments using the \msc 1323# command. Doxygen will then run the mscgen tool (see 1324# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 1325# documentation. The MSCGEN_PATH tag allows you to specify the directory where 1326# the mscgen tool resides. If left empty the tool is assumed to be found in the 1327# default search path. 1328 1329MSCGEN_PATH = 1330 1331# If set to YES, the inheritance and collaboration graphs will hide 1332# inheritance and usage relations if the target is undocumented 1333# or is not a class. 1334 1335HIDE_UNDOC_RELATIONS = YES 1336 1337# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 1338# available from the path. This tool is part of Graphviz, a graph visualization 1339# toolkit from AT&T and Lucent Bell Labs. The other options in this section 1340# have no effect if this option is set to NO (the default) 1341 1342HAVE_DOT = NO 1343 1344# By default doxygen will write a font called FreeSans.ttf to the output 1345# directory and reference it in all dot files that doxygen generates. This 1346# font does not include all possible unicode characters however, so when you need 1347# these (or just want a differently looking font) you can specify the font name 1348# using DOT_FONTNAME. You need need to make sure dot is able to find the font, 1349# which can be done by putting it in a standard location or by setting the 1350# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 1351# containing the font. 1352 1353DOT_FONTNAME = FreeSans 1354 1355# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 1356# The default size is 10pt. 1357 1358DOT_FONTSIZE = 10 1359 1360# By default doxygen will tell dot to use the output directory to look for the 1361# FreeSans.ttf font (which doxygen will put there itself). If you specify a 1362# different font using DOT_FONTNAME you can set the path where dot 1363# can find it using this tag. 1364 1365DOT_FONTPATH = 1366 1367# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 1368# will generate a graph for each documented class showing the direct and 1369# indirect inheritance relations. Setting this tag to YES will force the 1370# the CLASS_DIAGRAMS tag to NO. 1371 1372CLASS_GRAPH = YES 1373 1374# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 1375# will generate a graph for each documented class showing the direct and 1376# indirect implementation dependencies (inheritance, containment, and 1377# class references variables) of the class with other documented classes. 1378 1379COLLABORATION_GRAPH = YES 1380 1381# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 1382# will generate a graph for groups, showing the direct groups dependencies 1383 1384GROUP_GRAPHS = YES 1385 1386# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 1387# collaboration diagrams in a style similar to the OMG's Unified Modeling 1388# Language. 1389 1390UML_LOOK = NO 1391 1392# If set to YES, the inheritance and collaboration graphs will show the 1393# relations between templates and their instances. 1394 1395TEMPLATE_RELATIONS = NO 1396 1397# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 1398# tags are set to YES then doxygen will generate a graph for each documented 1399# file showing the direct and indirect include dependencies of the file with 1400# other documented files. 1401 1402INCLUDE_GRAPH = YES 1403 1404# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 1405# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 1406# documented header file showing the documented files that directly or 1407# indirectly include this file. 1408 1409INCLUDED_BY_GRAPH = YES 1410 1411# If the CALL_GRAPH and HAVE_DOT options are set to YES then 1412# doxygen will generate a call dependency graph for every global function 1413# or class method. Note that enabling this option will significantly increase 1414# the time of a run. So in most cases it will be better to enable call graphs 1415# for selected functions only using the \callgraph command. 1416 1417CALL_GRAPH = NO 1418 1419# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 1420# doxygen will generate a caller dependency graph for every global function 1421# or class method. Note that enabling this option will significantly increase 1422# the time of a run. So in most cases it will be better to enable caller 1423# graphs for selected functions only using the \callergraph command. 1424 1425CALLER_GRAPH = NO 1426 1427# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 1428# will graphical hierarchy of all classes instead of a textual one. 1429 1430GRAPHICAL_HIERARCHY = YES 1431 1432# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 1433# then doxygen will show the dependencies a directory has on other directories 1434# in a graphical way. The dependency relations are determined by the #include 1435# relations between the files in the directories. 1436 1437DIRECTORY_GRAPH = YES 1438 1439# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 1440# generated by dot. Possible values are png, jpg, or gif 1441# If left blank png will be used. 1442 1443DOT_IMAGE_FORMAT = png 1444 1445# The tag DOT_PATH can be used to specify the path where the dot tool can be 1446# found. If left blank, it is assumed the dot tool can be found in the path. 1447 1448DOT_PATH = 1449 1450# The DOTFILE_DIRS tag can be used to specify one or more directories that 1451# contain dot files that are included in the documentation (see the 1452# \dotfile command). 1453 1454DOTFILE_DIRS = 1455 1456# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 1457# nodes that will be shown in the graph. If the number of nodes in a graph 1458# becomes larger than this value, doxygen will truncate the graph, which is 1459# visualized by representing a node as a red box. Note that doxygen if the 1460# number of direct children of the root node in a graph is already larger than 1461# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 1462# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. 1463 1464DOT_GRAPH_MAX_NODES = 50 1465 1466# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 1467# graphs generated by dot. A depth value of 3 means that only nodes reachable 1468# from the root by following a path via at most 3 edges will be shown. Nodes 1469# that lay further from the root node will be omitted. Note that setting this 1470# option to 1 or 2 may greatly reduce the computation time needed for large 1471# code bases. Also note that the size of a graph can be further restricted by 1472# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. 1473 1474MAX_DOT_GRAPH_DEPTH = 0 1475 1476# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 1477# background. This is disabled by default, because dot on Windows does not 1478# seem to support this out of the box. Warning: Depending on the platform used, 1479# enabling this option may lead to badly anti-aliased labels on the edges of 1480# a graph (i.e. they become hard to read). 1481 1482DOT_TRANSPARENT = NO 1483 1484# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 1485# files in one run (i.e. multiple -o and -T options on the command line). This 1486# makes dot run faster, but since only newer versions of dot (>1.8.10) 1487# support this, this feature is disabled by default. 1488 1489DOT_MULTI_TARGETS = NO 1490 1491# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 1492# generate a legend page explaining the meaning of the various boxes and 1493# arrows in the dot generated graphs. 1494 1495GENERATE_LEGEND = YES 1496 1497# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 1498# remove the intermediate dot files that are used to generate 1499# the various graphs. 1500 1501DOT_CLEANUP = YES 1502 1503#--------------------------------------------------------------------------- 1504# Options related to the search engine 1505#--------------------------------------------------------------------------- 1506 1507# The SEARCHENGINE tag specifies whether or not a search engine should be 1508# used. If set to NO the values of all tags below this one will be ignored. 1509 1510SEARCHENGINE = NO 1511