1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sw.hxx"
26
27
28 #include "cmdid.h"
29 #include "hintids.hxx"
30 #include <editeng/sizeitem.hxx>
31 #include <editeng/brshitem.hxx>
32 #include <sfx2/app.hxx>
33 #include <sfx2/request.hxx>
34 #include <sfx2/objface.hxx>
35 #include <sfx2/bindings.hxx>
36 #include <svl/stritem.hxx>
37 #include <svl/eitem.hxx>
38 #include <tools/urlobj.hxx>
39 #include <svl/whiter.hxx>
40 #include <svl/intitem.hxx>
41 #include <tools/shl.hxx>
42 #include <svl/srchitem.hxx>
43
44 // --> FME 2005-01-04 #i35572#
45 #include <numrule.hxx>
46 // <--
47 #include <fmtornt.hxx>
48 #include "wrtsh.hxx"
49 #include "swmodule.hxx"
50 #include "frmatr.hxx"
51 #include "helpid.h"
52 #include "globals.hrc"
53 #include "shells.hrc"
54 #include "uinums.hxx"
55 #include "listsh.hxx"
56 #include "poolfmt.hxx"
57 #include "view.hxx"
58 #include "edtwin.hxx"
59
60 #define SwListShell
61 #include <sfx2/msg.hxx>
62 #include "swslots.hxx"
63
64 #include <IDocumentOutlineNodes.hxx>
65
SFX_IMPL_INTERFACE(SwListShell,SwBaseShell,SW_RES (STR_SHELLNAME_LIST))66 SFX_IMPL_INTERFACE(SwListShell, SwBaseShell, SW_RES(STR_SHELLNAME_LIST))
67 {
68 SFX_OBJECTBAR_REGISTRATION(SFX_OBJECTBAR_OBJECT, SW_RES(RID_NUM_TOOLBOX));
69 }
70
71
TYPEINIT1(SwListShell,SwBaseShell)72 TYPEINIT1(SwListShell,SwBaseShell)
73
74 // --> FME 2005-01-04 #i35572# Functionality of Numbering/Bullet toolbar
75 // for outline numbered paragraphs should match the functions for outlines
76 // available in the navigator. Therefore the code in the following
77 // function is quite similar the the code in SwContentTree::ExecCommand.
78 void lcl_OutlineUpDownWithSubPoints( SwWrtShell& rSh, bool bMove, bool bUp )
79 {
80 const sal_uInt16 nActPos = rSh.GetOutlinePos();
81 if ( nActPos < USHRT_MAX && rSh.IsOutlineMovable( nActPos ) )
82 {
83 rSh.Push();
84 rSh.MakeOutlineSel( nActPos, nActPos, sal_True );
85
86 if ( bMove )
87 {
88 const IDocumentOutlineNodes* pIDoc( rSh.getIDocumentOutlineNodesAccess() );
89 const sal_uInt16 nActLevel = static_cast<sal_uInt16>(pIDoc->getOutlineLevel( nActPos ));
90 sal_uInt16 nActEndPos = nActPos + 1;
91 sal_Int16 nDir = 0;
92
93 if ( !bUp )
94 {
95 // Move down with subpoints:
96 while ( nActEndPos < pIDoc->getOutlineNodesCount() &&
97 pIDoc->getOutlineLevel( nActEndPos ) > nActLevel )
98 ++nActEndPos;
99
100 if ( nActEndPos < pIDoc->getOutlineNodesCount() )
101 {
102 // The current subpoint which should be moved
103 // starts at nActPos and ends at nActEndPos - 1
104 --nActEndPos;
105 sal_uInt16 nDest = nActEndPos + 2;
106 while ( nDest < pIDoc->getOutlineNodesCount() &&
107 pIDoc->getOutlineLevel( nDest ) > nActLevel )
108 ++nDest;
109
110 nDir = nDest - 1 - nActEndPos;
111 }
112 }
113 else
114 {
115 // Move up with subpoints:
116 if ( nActPos > 0 )
117 {
118 --nActEndPos;
119 sal_uInt16 nDest = nActPos - 1;
120 while ( nDest > 0 && pIDoc->getOutlineLevel( nDest ) > nActLevel )
121 --nDest;
122
123 nDir = nDest - nActPos;
124 }
125 }
126
127 if ( nDir )
128 {
129 rSh.MoveOutlinePara( nDir );
130 rSh.GotoOutline( nActPos + nDir );
131 }
132 }
133 else
134 {
135 // Up/down with subpoints:
136 rSh.OutlineUpDown( bUp ? -1 : 1 );
137 }
138
139 rSh.ClearMark();
140 rSh.Pop( sal_False );
141 }
142 }
143 // <--
144
Execute(SfxRequest & rReq)145 void SwListShell::Execute(SfxRequest &rReq)
146 {
147 const SfxItemSet* pArgs = rReq.GetArgs();
148 sal_uInt16 nSlot = rReq.GetSlot();
149 SwWrtShell& rSh = GetShell();
150
151 // --> FME 2005-01-04 #i35572#
152 const SwNumRule* pCurRule = rSh.GetCurNumRule();
153 ASSERT( pCurRule, "SwListShell::Execute without NumRule" )
154 bool bOutline = pCurRule && pCurRule->IsOutlineRule();
155 // <--
156
157 switch (nSlot)
158 {
159 case FN_NUM_BULLET_DOWN:
160 case FN_NUM_BULLET_UP:
161 {
162 SfxViewFrame * pFrame = GetView().GetViewFrame();
163
164 rReq.Done();
165 rSh.NumUpDown( ( nSlot == FN_NUM_BULLET_DOWN )
166 ? sal_True
167 : sal_False );
168 pFrame->GetBindings().Invalidate( SID_TABLE_CELL ); // StatusZeile updaten!
169 }
170 break;
171
172 case FN_NUM_BULLET_NEXT:
173 rSh.GotoNextNum();
174 rReq.Done();
175 break;
176
177 case FN_NUM_BULLET_NONUM:
178 rSh.NoNum();
179 rReq.Done();
180 break;
181
182 case FN_NUM_BULLET_OFF:
183 {
184 rReq.Ignore();
185 SfxRequest aReq( GetView().GetViewFrame(), FN_NUM_BULLET_ON );
186 aReq.AppendItem( SfxBoolItem( FN_PARAM_1, sal_False ) );
187 aReq.Done();
188 rSh.DelNumRules();
189 break;
190 }
191
192 case FN_NUM_BULLET_OUTLINE_DOWN:
193 if ( bOutline )
194 lcl_OutlineUpDownWithSubPoints( rSh, false, false );
195 else
196 rSh.MoveNumParas(sal_False, sal_False);
197 rReq.Done();
198 break;
199
200 case FN_NUM_BULLET_OUTLINE_MOVEDOWN:
201 if ( bOutline )
202 lcl_OutlineUpDownWithSubPoints( rSh, true, false );
203 else
204 rSh.MoveNumParas(sal_True, sal_False);
205 rReq.Done();
206 break;
207
208 case FN_NUM_BULLET_OUTLINE_MOVEUP:
209 if ( bOutline )
210 lcl_OutlineUpDownWithSubPoints( rSh, true, true );
211 else
212 rSh.MoveNumParas(sal_True, sal_True);
213 rReq.Done();
214 break;
215
216 case FN_NUM_BULLET_OUTLINE_UP:
217 if ( bOutline )
218 lcl_OutlineUpDownWithSubPoints( rSh, false, true );
219 else
220 rSh.MoveNumParas(sal_False, sal_True);
221 rReq.Done();
222 break;
223
224 case FN_NUM_BULLET_PREV:
225 rSh.GotoPrevNum();
226 rReq.Done();
227 break;
228
229 case FN_NUM_OR_NONUM:
230 {
231 sal_Bool bApi = rReq.IsAPI();
232 sal_Bool bDelete = !rSh.IsNoNum(!bApi);
233 if(pArgs )
234 bDelete = ((SfxBoolItem &)pArgs->Get(rReq.GetSlot())).GetValue();
235 rSh.NumOrNoNum( bDelete, !bApi );
236 rReq.AppendItem( SfxBoolItem( nSlot, bDelete ) );
237 rReq.Done();
238 }
239 break;
240 default:
241 ASSERT(!this, falscher Dispatcher);
242 return;
243 }
244 }
245
246
GetState(SfxItemSet & rSet)247 void SwListShell::GetState(SfxItemSet &rSet)
248 {
249 SfxWhichIter aIter( rSet );
250 sal_uInt16 nWhich = aIter.FirstWhich();
251 SwWrtShell& rSh = GetShell();
252 sal_uInt8 nCurrentNumLevel = rSh.GetNumLevel();
253 while ( nWhich )
254 {
255 switch( nWhich )
256 {
257 case FN_NUM_OR_NONUM:
258 rSet.Put(SfxBoolItem(nWhich, GetShell().IsNoNum(sal_False)));
259 break;
260 case FN_NUM_BULLET_OUTLINE_UP:
261 case FN_NUM_BULLET_UP:
262 if(!nCurrentNumLevel)
263 rSet.DisableItem(nWhich);
264 break;
265 case FN_NUM_BULLET_OUTLINE_DOWN :
266 {
267 sal_uInt8 nUpper = 0;
268 sal_uInt8 nLower = 0;
269 rSh.GetCurrentOutlineLevels( nUpper, nLower );
270 if(nLower == (MAXLEVEL - 1))
271 rSet.DisableItem(nWhich);
272 }
273 break;
274 case FN_NUM_BULLET_DOWN:
275 if(nCurrentNumLevel == (MAXLEVEL - 1))
276 rSet.DisableItem(nWhich);
277 break;
278
279 case FN_NUM_BULLET_NONUM:
280 if ( rSh.CrsrInsideInputFld() )
281 {
282 rSet.DisableItem(nWhich);
283 }
284 break;
285 }
286 nWhich = aIter.NextWhich();
287 }
288 }
289
290
SwListShell(SwView & _rView)291 SwListShell::SwListShell(SwView &_rView) :
292 SwBaseShell(_rView)
293 {
294 SetName(String::CreateFromAscii("List"));
295 SetHelpId(SW_LISTSHELL);
296 }
297
298
299