1 /************************************************************** 2 * 3 * Licensed to the Apache Software Foundation (ASF) under one 4 * or more contributor license agreements. See the NOTICE file 5 * distributed with this work for additional information 6 * regarding copyright ownership. The ASF licenses this file 7 * to you under the Apache License, Version 2.0 (the 8 * "License"); you may not use this file except in compliance 9 * with the License. You may obtain a copy of the License at 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, 14 * software distributed under the License is distributed on an 15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 * KIND, either express or implied. See the License for the 17 * specific language governing permissions and limitations 18 * under the License. 19 * 20 *************************************************************/ 21 22 23 24 /** @HTML */ 25 26 #ifndef _OSL_FILE_HXX_ 27 #define _OSL_FILE_HXX_ 28 29 #ifdef __cplusplus 30 31 #include <osl/time.h> 32 # include <rtl/memory.h> 33 # include <rtl/ustring.hxx> 34 35 #include <osl/file.h> 36 # include <rtl/byteseq.hxx> 37 38 #include <stdio.h> 39 40 namespace osl 41 { 42 43 44 // ----------------------------------------------------------------------------- 45 /** Base class for all File System specific objects. 46 47 @see Directory 48 @see DirectoryItem 49 @see File 50 */ 51 52 class FileBase 53 { 54 public: 55 56 enum RC { 57 E_None = osl_File_E_None, 58 E_PERM = osl_File_E_PERM, 59 E_NOENT = osl_File_E_NOENT, 60 E_SRCH = osl_File_E_SRCH, 61 E_INTR = osl_File_E_INTR, 62 E_IO = osl_File_E_IO, 63 E_NXIO = osl_File_E_NXIO, 64 E_2BIG = osl_File_E_2BIG, 65 E_NOEXEC = osl_File_E_NOEXEC, 66 E_BADF = osl_File_E_BADF, 67 E_CHILD = osl_File_E_CHILD, 68 E_AGAIN = osl_File_E_AGAIN, 69 E_NOMEM = osl_File_E_NOMEM, 70 E_ACCES = osl_File_E_ACCES, 71 E_FAULT = osl_File_E_FAULT, 72 E_BUSY = osl_File_E_BUSY, 73 E_EXIST = osl_File_E_EXIST, 74 E_XDEV = osl_File_E_XDEV, 75 E_NODEV = osl_File_E_NODEV, 76 E_NOTDIR = osl_File_E_NOTDIR, 77 E_ISDIR = osl_File_E_ISDIR, 78 E_INVAL = osl_File_E_INVAL, 79 E_NFILE = osl_File_E_NFILE, 80 E_MFILE = osl_File_E_MFILE, 81 E_NOTTY = osl_File_E_NOTTY, 82 E_FBIG = osl_File_E_FBIG, 83 E_NOSPC = osl_File_E_NOSPC, 84 E_SPIPE = osl_File_E_SPIPE, 85 E_ROFS = osl_File_E_ROFS, 86 E_MLINK = osl_File_E_MLINK, 87 E_PIPE = osl_File_E_PIPE, 88 E_DOM = osl_File_E_DOM, 89 E_RANGE = osl_File_E_RANGE, 90 E_DEADLK = osl_File_E_DEADLK, 91 E_NAMETOOLONG = osl_File_E_NAMETOOLONG, 92 E_NOLCK = osl_File_E_NOLCK, 93 E_NOSYS = osl_File_E_NOSYS, 94 E_NOTEMPTY = osl_File_E_NOTEMPTY, 95 E_LOOP = osl_File_E_LOOP, 96 E_ILSEQ = osl_File_E_ILSEQ, 97 E_NOLINK = osl_File_E_NOLINK, 98 E_MULTIHOP = osl_File_E_MULTIHOP, 99 E_USERS = osl_File_E_USERS, 100 E_OVERFLOW = osl_File_E_OVERFLOW, 101 E_NOTREADY = osl_File_E_NOTREADY, 102 E_invalidError = osl_File_E_invalidError, /* unmapped error: always last entry in enum! */ 103 E_TIMEDOUT = osl_File_E_TIMEDOUT, 104 E_NETWORK = osl_File_E_NETWORK 105 }; 106 107 108 public: 109 110 /** Determine a valid unused canonical name for a requested name. 111 112 Determines a valid unused canonical name for a requested name. 113 Depending on the Operating System and the File System the illegal characters are replaced by valid ones. 114 If a file or directory with the requested name already exists a new name is generated following 115 the common rules on the actual Operating System and File System. 116 117 @param ustrRequestedURL [in] 118 Requested name of a file or directory. 119 120 @param pustrValidURL [out] 121 On success receives a name which is unused and valid on the actual Operating System and 122 File System. 123 124 @return 125 E_None on success 126 E_INVAL the format of the parameters was not valid 127 128 @see DirectoryItem::getFileStatus() 129 */ 130 131 static inline RC getCanonicalName( const ::rtl::OUString& ustrRequestedURL, ::rtl::OUString& ustrValidURL ) 132 { 133 return (RC) osl_getCanonicalName( ustrRequestedURL.pData, &ustrValidURL.pData ); 134 } 135 136 /** Convert a path relative to a given directory into an full qualified file URL. 137 138 Convert a path relative to a given directory into an full qualified file URL. 139 The function resolves symbolic links if possible and path ellipses, so on success 140 the resulting absolute path is fully resolved. 141 142 @param ustrBaseDirectoryURL [in] 143 Base directory URL to which the relative path is related to. 144 145 @param ustrRelativeFileURL [in] 146 An URL of a file or directory relative to the directory path specified by ustrBaseDirectoryURL 147 or an absolute path. 148 If ustrRelativeFileURL denotes an absolute path ustrBaseDirectoryURL will be ignored. 149 150 @param ustrAbsoluteFileURL [out] 151 On success it receives the full qualified absoulte file URL. 152 153 @return 154 E_None on success 155 E_INVAL the format of the parameters was not valid 156 E_NOMEM not enough memory for allocating structures 157 E_NOTDIR not a directory 158 E_ACCES permission denied 159 E_NOENT no such file or directory 160 E_NAMETOOLONG file name too long 161 E_OVERFLOW value too large for defined data type 162 E_FAULT bad address 163 E_INTR function call was interrupted 164 E_LOOP too many symbolic links encountered 165 E_MULTIHOP multihop attempted 166 E_NOLINK link has been severed 167 168 @see DirectoryItem::getFileStatus() 169 */ 170 171 static inline RC getAbsoluteFileURL( const ::rtl::OUString& ustrBaseDirectoryURL, const ::rtl::OUString& ustrRelativeFileURL, ::rtl::OUString& ustrAbsoluteFileURL ) 172 { 173 return (RC) osl_getAbsoluteFileURL( ustrBaseDirectoryURL.pData, ustrRelativeFileURL.pData, &ustrAbsoluteFileURL.pData ); 174 } 175 176 /** Convert a file URL into a system dependend path. 177 178 @param ustrFileURL [in] 179 A File URL. 180 181 @param ustrSystemPath [out] 182 On success it receives the system path. 183 184 @return 185 E_None on success 186 E_INVAL the format of the parameters was not valid 187 188 @see getFileURLFromSystemPath() 189 */ 190 191 static inline RC getSystemPathFromFileURL( const ::rtl::OUString& ustrFileURL, ::rtl::OUString& ustrSystemPath ) 192 { 193 return (RC) osl_getSystemPathFromFileURL( ustrFileURL.pData, &ustrSystemPath.pData ); 194 } 195 196 /** Convert a system dependend path into a file URL. 197 198 @param ustrSystemPath [in] 199 A System dependent path of a file or directory. 200 201 @param ustrFileURL [out] 202 On success it receives the file URL. 203 204 @return 205 E_None on success 206 E_INVAL the format of the parameters was not valid 207 208 @see getSystemPathFromFileURL() 209 */ 210 211 static inline RC getFileURLFromSystemPath( const ::rtl::OUString& ustrSystemPath, ::rtl::OUString& ustrFileURL ) 212 { 213 return (RC) osl_getFileURLFromSystemPath( ustrSystemPath.pData, &ustrFileURL.pData ); 214 } 215 216 /** Searche a full qualified system path or a file URL. 217 218 @param ustrFileName [in] 219 A system dependent path, a file URL, a file or relative directory 220 221 @param ustrSearchPath [in] 222 A list of system paths, in which a given file has to be searched. The Notation of a path list is 223 system dependend, e.g. on UNIX system "/usr/bin:/bin" and on Windows "C:\BIN;C:\BATCH". 224 These paths are only for the search of a file or a relative path, otherwise it will be ignored. 225 If ustrSearchPath is NULL or while using the search path the search failed, the function searches for 226 a matching file in all system directories and in the directories listed in the PATH environment 227 variable. 228 The value of an environment variable should be used (e.g. LD_LIBRARY_PATH) if the caller is not 229 aware of the Operating System and so doesn't know which path list delimiter to use. 230 231 @param ustrFileURL [out] 232 On success it receives the full qualified file URL. 233 234 @return 235 E_None on success 236 E_INVAL the format of the parameters was not valid 237 E_NOTDIR not a directory 238 E_NOENT no such file or directory not found 239 240 @see getFileURLFromSystemPath() 241 @see getSystemPathFromFileURL() 242 */ 243 244 static inline RC searchFileURL( const ::rtl::OUString& ustrFileName, const ::rtl::OUString& ustrSearchPath, ::rtl::OUString& ustrFileURL ) 245 { 246 return (RC) osl_searchFileURL( ustrFileName.pData, ustrSearchPath.pData, &ustrFileURL.pData ); 247 } 248 249 /** Retrieves the file URL of the system's temporary directory path. 250 251 @param ustrTempDirURL[out] 252 On success receives the URL of system's temporary directory path. 253 254 @return 255 E_None on success 256 E_NOENT no such file or directory not found 257 */ 258 259 static inline RC getTempDirURL( ::rtl::OUString& ustrTempDirURL ) 260 { 261 return (RC) osl_getTempDirURL( &ustrTempDirURL.pData ); 262 } 263 264 /** Creates a temporary file in the directory provided by the caller or the 265 directory returned by getTempDirURL. 266 Under UNIX Operating Systems the file will be created with read and write 267 access for the user exclusively. 268 If the caller requests only a handle to the open file but not the name of 269 it, the file will be automatically removed on close else the caller is 270 responsible for removing the file on success.<br><br> 271 272 @param pustrDirectoryURL [in] 273 Specifies the full qualified URL where the temporary file should be created. 274 If pustrDirectoryURL is 0 the path returned by osl_getTempDirURL will be used. 275 276 @param pHandle [out] 277 On success receives a handle to the open file. 278 If pHandle is 0 the file will be closed on return, in this case 279 pustrTempFileURL must not be 0. 280 281 @param pustrTempFileURL [out] 282 On success receives the full qualified URL of the temporary file. 283 If pustrTempFileURL is 0 the file will be automatically removed 284 on close, in this case pHandle must not be 0. 285 If pustrTempFileURL is not 0 the caller receives the name of the 286 created file and is responsible for removing the file. 287 288 @descr 289 Description of the different pHandle, ppustrTempFileURL parameter combinations. 290 pHandle is 0 and pustrTempDirURL is 0 - this combination is invalid<br> 291 pHandle is not 0 and pustrTempDirURL is 0 - a handle to the open file 292 will be returned on success and the file will be automatically removed on close<br> 293 pHandle is 0 and pustrTempDirURL is not 0 - the name of the file will be 294 returned, the caller is responsible for opening, closing and removing the file.<br> 295 pHandle is not 0 and pustrTempDirURL is not 0 - a handle to the open file as well as 296 the file name will be returned, the caller is responsible for closing and removing 297 the file.<br> 298 299 @return 300 E_None on success 301 E_INVAL the format of the parameter is invalid 302 E_NOMEM not enough memory for allocating structures 303 E_ACCES Permission denied 304 E_NOENT No such file or directory 305 E_NOTDIR Not a directory 306 E_ROFS Read-only file system 307 E_NOSPC No space left on device 308 E_DQUOT Quota exceeded 309 310 @see getTempDirURL() 311 */ 312 313 static inline RC createTempFile( 314 ::rtl::OUString* pustrDirectoryURL, 315 oslFileHandle* pHandle, 316 ::rtl::OUString* pustrTempFileURL) 317 { 318 rtl_uString* pustr_dir_url = pustrDirectoryURL ? pustrDirectoryURL->pData : 0; 319 rtl_uString** ppustr_tmp_file_url = pustrTempFileURL ? &pustrTempFileURL->pData : 0; 320 321 return (RC) osl_createTempFile(pustr_dir_url, pHandle, ppustr_tmp_file_url); 322 } 323 }; 324 325 326 // ----------------------------------------------------------------------------- 327 /** The VolumeDevice class. 328 329 @see VolumeInfo 330 */ 331 #ifdef OS2 332 class VolumeInfo; 333 #endif 334 335 class VolumeDevice : public FileBase 336 { 337 #ifdef OS2 338 public: 339 #endif 340 oslVolumeDeviceHandle _aHandle; 341 342 public: 343 344 /** Constructor. 345 */ 346 347 VolumeDevice() : _aHandle( NULL ) 348 { 349 } 350 351 /** Copy constructor. 352 353 @param rDevice 354 The other volume device. 355 */ 356 357 VolumeDevice( const VolumeDevice & rDevice ) 358 { 359 _aHandle = rDevice._aHandle; 360 if ( _aHandle ) 361 osl_acquireVolumeDeviceHandle( _aHandle ); 362 } 363 364 /** Destructor. 365 */ 366 367 ~VolumeDevice() 368 { 369 if ( _aHandle ) 370 osl_releaseVolumeDeviceHandle( _aHandle ); 371 } 372 373 /** Assignment operator. 374 375 @param rDevice 376 The other volume device. 377 */ 378 379 inline VolumeDevice & operator =( const VolumeDevice & rDevice ) 380 { 381 oslVolumeDeviceHandle newHandle = rDevice._aHandle; 382 383 if ( newHandle ) 384 osl_acquireVolumeDeviceHandle( newHandle ); 385 386 if ( _aHandle ) 387 osl_releaseVolumeDeviceHandle( _aHandle ); 388 389 _aHandle = newHandle; 390 391 return *this; 392 } 393 394 /** Automount a volume device. 395 396 @return 397 E_None on success 398 399 @todo 400 specify all error codes that may be returned 401 */ 402 403 inline RC automount() 404 { 405 return (RC)osl_automountVolumeDevice( _aHandle ); 406 } 407 408 /** Unmount a volume device. 409 410 @return 411 E_None on success 412 413 @todo 414 specify all error codes that may be returned 415 */ 416 417 inline RC unmount() 418 { 419 return (RC)osl_unmountVolumeDevice( _aHandle ); 420 } 421 422 /** Get the full qualified URL where a device is mounted to. 423 424 @return 425 The full qualified URL where the device is mounted to. 426 */ 427 inline rtl::OUString getMountPath() 428 { 429 rtl::OUString aPath; 430 osl_getVolumeDeviceMountPath( _aHandle, &aPath.pData ); 431 return aPath; 432 } 433 434 friend class VolumeInfo; 435 }; 436 437 // ----------------------------------------------------------------------------- 438 439 #define VolumeInfoMask_Attributes osl_VolumeInfo_Mask_Attributes 440 #define VolumeInfoMask_TotalSpace osl_VolumeInfo_Mask_TotalSpace 441 #define VolumeInfoMask_UsedSpace osl_VolumeInfo_Mask_UsedSpace 442 #define VolumeInfoMask_FreeSpace osl_VolumeInfo_Mask_FreeSpace 443 #define VolumeInfoMask_MaxNameLength osl_VolumeInfo_Mask_MaxNameLength 444 #define VolumeInfoMask_MaxPathLength osl_VolumeInfo_Mask_MaxPathLength 445 #define VolumeInfoMask_FileSystemName osl_VolumeInfo_Mask_FileSystemName 446 #define VolumeInfoMask_FileSystemCaseHandling osl_VolumeInfo_Mask_FileSystemCaseHandling 447 448 class Directory; 449 450 /** The VolumeInfo class. 451 452 Neither copy nor assignment is allowed for this class. 453 454 @see Directory::getVolumeInfo 455 */ 456 457 458 class VolumeInfo 459 { 460 oslVolumeInfo _aInfo; 461 sal_uInt32 _nMask; 462 VolumeDevice _aDevice; 463 464 /** Copy constructor. 465 */ 466 467 VolumeInfo( VolumeInfo& ); 468 469 /** Assginment operator. 470 */ 471 472 VolumeInfo& operator = ( VolumeInfo& ); 473 474 public: 475 476 /** Constructor. 477 478 @param nMask 479 Set of flaggs decribing the demanded information. 480 */ 481 482 VolumeInfo( sal_uInt32 nMask ): _nMask( nMask ) 483 { 484 _aInfo.uStructSize = sizeof( oslVolumeInfo ); 485 rtl_fillMemory( &_aInfo.uValidFields, sizeof( oslVolumeInfo ) - sizeof( sal_uInt32 ), 0 ); 486 _aInfo.pDeviceHandle = &_aDevice._aHandle; 487 } 488 489 /** Destructor. 490 */ 491 492 ~VolumeInfo() 493 { 494 if( _aInfo.ustrFileSystemName ) 495 rtl_uString_release( _aInfo.ustrFileSystemName ); 496 } 497 498 /** Check if specified fields are valid. 499 500 @param nMask 501 Set of flags for the fields to check. 502 503 @return sal_True if all fields are valid else sal_False. 504 */ 505 506 inline sal_Bool isValid( sal_uInt32 nMask ) const 507 { 508 return ( nMask & _aInfo.uValidFields ) == nMask; 509 } 510 511 /** Check the remote flag. 512 513 @return 514 sal_True if Attributes are valid and the volume is remote else sal_False. 515 */ 516 517 inline sal_Bool getRemoteFlag() const 518 { 519 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_Remote); 520 } 521 522 /** Check the removeable flag. 523 524 @return 525 sal_True if attributes are valid and the volume is removable else sal_False. 526 */ 527 528 inline sal_Bool getRemoveableFlag() const 529 { 530 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_Removeable); 531 } 532 533 /** Check the compact disc flag. 534 535 @return 536 sal_True if attributes are valid and the volume is a CDROM else sal_False. 537 */ 538 539 inline sal_Bool getCompactDiscFlag() const 540 { 541 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_CompactDisc); 542 } 543 544 /** Check the floppy disc flag. 545 546 @return 547 sal_True if attributes are valid and the volume is a floppy disk else sal_False. 548 */ 549 550 inline sal_Bool getFloppyDiskFlag() const 551 { 552 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_FloppyDisk); 553 } 554 555 /** Check the fixed disk flag. 556 557 @return 558 sal_True if attributes are valid and the volume is a fixed disk else sal_False. 559 */ 560 561 inline sal_Bool getFixedDiskFlag() const 562 { 563 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_FixedDisk); 564 } 565 566 /** Check the RAM disk flag. 567 568 @return 569 sal_True if attributes are valid and the volume is a RAM disk else sal_False. 570 */ 571 572 inline sal_Bool getRAMDiskFlag() const 573 { 574 return 0 != (_aInfo.uAttributes & osl_Volume_Attribute_RAMDisk); 575 } 576 577 /** Determine the total space of a volume device. 578 579 @return 580 The total diskspace of this volume if this information is valid, 581 0 otherwise. 582 */ 583 584 inline sal_uInt64 getTotalSpace() const 585 { 586 return _aInfo.uTotalSpace; 587 } 588 589 /** Determine the free space of a volume device. 590 591 @return 592 The free diskspace of this volume if this information is valid, 593 0 otherwise. 594 */ 595 596 inline sal_uInt64 getFreeSpace() const 597 { 598 return _aInfo.uFreeSpace; 599 } 600 601 /** Determine the used space of a volume device. 602 603 @return 604 The used diskspace of this volume if this information is valid, 605 0 otherwise. 606 */ 607 608 inline sal_uInt64 getUsedSpace() const 609 { 610 return _aInfo.uUsedSpace; 611 } 612 613 /** Determine the maximal length of a file name. 614 615 @return 616 The maximal length of a file name if this information is valid, 617 0 otherwise. 618 */ 619 620 inline sal_uInt32 getMaxNameLength() const 621 { 622 return _aInfo.uMaxNameLength; 623 } 624 625 /** Determine the maximal length of a path name. 626 627 @return 628 The maximal length of a path if this information is valid, 629 0 otherwise. 630 */ 631 632 inline sal_uInt32 getMaxPathLength() const 633 { 634 return _aInfo.uMaxPathLength; 635 } 636 637 /** Determine the name of the volume device's File System. 638 639 @return 640 The name of the volume's fielsystem if this information is valid, 641 otherwise an empty string. 642 */ 643 644 inline ::rtl::OUString getFileSystemName() const 645 { 646 return _aInfo.ustrFileSystemName ? ::rtl::OUString( _aInfo.ustrFileSystemName ) : ::rtl::OUString(); 647 } 648 649 650 /** Get the volume device handle. 651 652 @return 653 The device handle of the volume if this information is valid, 654 otherwise returns NULL; 655 */ 656 657 inline VolumeDevice getDeviceHandle() const 658 { 659 return _aDevice; 660 } 661 662 /** Return whether the file system is case sensitive or 663 case insensitive 664 665 @return 666 true if the file system is case sensitive false otherwise 667 */ 668 bool isCaseSensitiveFileSystem() const 669 { 670 return (_aInfo.uAttributes & osl_Volume_Attribute_Case_Sensitive); 671 } 672 673 /** Return whether the file system preserves the case of 674 file and directory names or not 675 676 @return 677 true if the file system preserves the case of file and 678 directory names false otherwise 679 */ 680 bool isCasePreservingFileSystem() const 681 { 682 return (_aInfo.uAttributes & osl_Volume_Attribute_Case_Is_Preserved); 683 } 684 685 friend class Directory; 686 }; 687 688 // ----------------------------------------------------------------------------- 689 690 #define FileStatusMask_Type osl_FileStatus_Mask_Type 691 #define FileStatusMask_Attributes osl_FileStatus_Mask_Attributes 692 #define FileStatusMask_CreationTime osl_FileStatus_Mask_CreationTime 693 #define FileStatusMask_AccessTime osl_FileStatus_Mask_AccessTime 694 #define FileStatusMask_ModifyTime osl_FileStatus_Mask_ModifyTime 695 #define FileStatusMask_FileSize osl_FileStatus_Mask_FileSize 696 #define FileStatusMask_FileName osl_FileStatus_Mask_FileName 697 #define FileStatusMask_FileURL osl_FileStatus_Mask_FileURL 698 #define FileStatusMask_LinkTargetURL osl_FileStatus_Mask_LinkTargetURL 699 #define FileStatusMask_All osl_FileStatus_Mask_All 700 #define FileStatusMask_Validate osl_FileStatus_Mask_Validate 701 702 #define Attribute_ReadOnly osl_File_Attribute_ReadOnly 703 #define Attribute_Hidden osl_File_Attribute_Hidden 704 #define Attribute_Executable osl_File_Attribute_Executable 705 #define Attribute_GrpWrite osl_File_Attribute_GrpWrite 706 #define Attribute_GrpRead osl_File_Attribute_GrpRead 707 #define Attribute_GrpExe osl_File_Attribute_GrpExe 708 #define Attribute_OwnWrite osl_File_Attribute_OwnWrite 709 #define Attribute_OwnRead osl_File_Attribute_OwnRead 710 #define Attribute_OwnExe osl_File_Attribute_OwnExe 711 #define Attribute_OthWrite osl_File_Attribute_OthWrite 712 #define Attribute_OthRead osl_File_Attribute_OthRead 713 #define Attribute_OthExe osl_File_Attribute_OthExe 714 715 class DirectoryItem; 716 717 /** The FileStatus class. 718 719 @see DirectoryItem::getFileStatus 720 */ 721 722 class FileStatus 723 { 724 oslFileStatus _aStatus; 725 sal_uInt32 _nMask; 726 727 /** Copy constructor. 728 */ 729 730 FileStatus( FileStatus& ); 731 732 /** Assignment operator. 733 */ 734 735 FileStatus& operator = ( FileStatus& ); 736 737 public: 738 739 enum Type { 740 Directory = osl_File_Type_Directory, 741 Volume = osl_File_Type_Volume, 742 Regular = osl_File_Type_Regular, 743 Fifo = osl_File_Type_Fifo, 744 Socket = osl_File_Type_Socket, 745 Link = osl_File_Type_Link, 746 Special = osl_File_Type_Special, 747 Unknown = osl_File_Type_Unknown 748 }; 749 750 /** Constructor. 751 752 @param nMask 753 Set of flaggs decribing the demanded information. 754 */ 755 756 FileStatus( sal_uInt32 nMask ): _nMask( nMask ) 757 { 758 _aStatus.uStructSize = sizeof( oslFileStatus ); 759 rtl_fillMemory( &_aStatus.uValidFields, sizeof( oslFileStatus ) - sizeof( sal_uInt32 ), 0 ); 760 } 761 762 /** Destructor. 763 */ 764 765 ~FileStatus() 766 { 767 if ( _aStatus.ustrFileURL ) 768 rtl_uString_release( _aStatus.ustrFileURL ); 769 if ( _aStatus.ustrLinkTargetURL ) 770 rtl_uString_release( _aStatus.ustrLinkTargetURL ); 771 if ( _aStatus.ustrFileName ) 772 rtl_uString_release( _aStatus.ustrFileName ); 773 } 774 775 /** Check if specified fields are valid. 776 777 @param nMask 778 Set of flags for the fields to check. 779 780 @return 781 sal_True if all fields are valid else sal_False. 782 */ 783 784 inline sal_Bool isValid( sal_uInt32 nMask ) const 785 { 786 return ( nMask & _aStatus.uValidFields ) == nMask; 787 } 788 789 /** Get the file type. 790 791 @return 792 The file type if this information is valid, Unknown otherwise. 793 */ 794 inline Type getFileType() const 795 { 796 return (_aStatus.uValidFields & FileStatusMask_Type) ? (Type) _aStatus.eType : Unknown; 797 } 798 799 /** Get the file attributes. 800 801 @return 802 The set of attribute flags of this file. 803 */ 804 805 inline sal_uInt64 getAttributes() const 806 { 807 return _aStatus.uAttributes; 808 } 809 810 /** Get the creation time of this file. 811 812 @return 813 The creation time if this information is valid, 814 an uninitialized TimeValue otherwise. 815 */ 816 817 inline TimeValue getCreationTime() const 818 { 819 return _aStatus.aCreationTime; 820 } 821 822 /** Get the file access time. 823 824 @return 825 The last access time if this information is valid, 826 an uninitialized TimeValue otherwise. 827 */ 828 829 inline TimeValue getAccessTime() const 830 { 831 return _aStatus.aAccessTime; 832 } 833 834 /** Get the file modification time. 835 836 @return 837 The last modified time if this information is valid, 838 an uninitialized TimeValue otherwise. 839 */ 840 841 inline TimeValue getModifyTime() const 842 { 843 return _aStatus.aModifyTime; 844 } 845 846 /** Get the size of the file. 847 848 @return 849 The actual file size if this information is valid, 0 otherwise. 850 */ 851 852 inline sal_uInt64 getFileSize() const 853 { 854 return _aStatus.uFileSize; 855 } 856 857 /** Get the file name. 858 859 @return 860 The file name if this information is valid, an empty string otherwise. 861 */ 862 863 inline ::rtl::OUString getFileName() const 864 { 865 return _aStatus.ustrFileName ? ::rtl::OUString(_aStatus.ustrFileName) : ::rtl::OUString(); 866 } 867 868 869 /** Get the URL of the file. 870 871 @return 872 The full qualified URL of the file if this information is valid, an empty string otherwise. 873 */ 874 875 inline ::rtl::OUString getFileURL() const 876 { 877 return _aStatus.ustrFileURL ? ::rtl::OUString(_aStatus.ustrFileURL) : ::rtl::OUString(); 878 } 879 880 /** Get the link target URL. 881 882 @return 883 The link target URL if this information is valid, an empty string otherwise. 884 */ 885 886 inline ::rtl::OUString getLinkTargetURL() const 887 { 888 return _aStatus.ustrLinkTargetURL ? ::rtl::OUString(_aStatus.ustrLinkTargetURL) : ::rtl::OUString(); 889 } 890 891 friend class DirectoryItem; 892 }; 893 894 895 // ----------------------------------------------------------------------------- 896 /** The file class object provides access to file contents and attributes. 897 898 @see Directory 899 @see DirectoryItem 900 */ 901 902 class File: public FileBase 903 { 904 oslFileHandle _pData; 905 ::rtl::OUString _aPath; 906 907 /** Copy constructor. 908 */ 909 910 File( File& ); 911 912 /** Assginment operator. 913 */ 914 915 File& operator = ( File& ); 916 917 public: 918 919 /** Constructor. 920 921 @param ustrFileURL [in] 922 The full qualified URL of the file. Relative paths are not allowed. 923 */ 924 925 File( const ::rtl::OUString& ustrFileURL ): _pData( 0 ), _aPath( ustrFileURL ) {} 926 927 /** Destructor 928 */ 929 930 inline ~File() 931 { 932 close(); 933 } 934 935 #define OpenFlag_Read osl_File_OpenFlag_Read 936 #define OpenFlag_Write osl_File_OpenFlag_Write 937 #define OpenFlag_Create osl_File_OpenFlag_Create 938 #define OpenFlag_NoLock osl_File_OpenFlag_NoLock 939 940 /** Open a regular file. 941 942 Open a file. Only regular files can be openend. 943 944 @param uFlags [in] 945 Specifies the open mode. 946 947 @return 948 E_None on success 949 E_NOMEM not enough memory for allocating structures 950 E_INVAL the format of the parameters was not valid 951 E_NAMETOOLONG pathname was too long 952 E_NOENT no such file or directory 953 E_ACCES permission denied 954 E_AGAIN a write lock could not be established 955 E_NOTDIR not a directory 956 E_NXIO no such device or address 957 E_NODEV no such device 958 E_ROFS read-only file system 959 E_TXTBSY text file busy 960 E_FAULT bad address 961 E_LOOP too many symbolic links encountered 962 E_NOSPC no space left on device 963 E_ISDIR is a directory 964 E_MFILE too many open files used by the process 965 E_NFILE too many open files in the system 966 E_DQUOT quota exceeded 967 E_EXIST file exists 968 E_INTR function call was interrupted 969 E_IO on I/O errors 970 E_MULTIHOP multihop attempted 971 E_NOLINK link has been severed 972 E_EOVERFLOW value too large for defined data type 973 974 @see close() 975 @see setPos() 976 @see getPos() 977 @see read() 978 @see write() 979 @see getSize() 980 @see setSize() 981 */ 982 983 inline RC open( sal_uInt32 uFlags ) 984 { 985 return (RC) osl_openFile( _aPath.pData, &_pData, uFlags ); 986 } 987 988 /** Close an open file. 989 990 @return 991 E_None on success 992 E_INVAL the format of the parameters was not valid 993 E_BADF Bad file 994 E_INTR function call was interrupted 995 E_NOLINK link has been severed 996 E_NOSPC no space left on device 997 E_IO on I/O errors 998 999 @see open() 1000 */ 1001 1002 inline RC close() 1003 { 1004 oslFileError Error = osl_File_E_BADF; 1005 1006 if( _pData ) 1007 { 1008 Error=osl_closeFile( _pData ); 1009 _pData = NULL; 1010 } 1011 1012 return (RC) Error; 1013 } 1014 1015 1016 #define Pos_Absolut osl_Pos_Absolut 1017 #define Pos_Current osl_Pos_Current 1018 #define Pos_End osl_Pos_End 1019 1020 /** Set the internal position pointer of an open file. 1021 1022 @param uHow [in] 1023 Distance to move the internal position pointer (from uPos). 1024 1025 @param uPos [in] 1026 Absolute position from the beginning of the file. 1027 1028 @return 1029 E_None on success 1030 E_INVAL the format of the parameters was not valid 1031 E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files 1032 1033 @see open() 1034 @see getPos() 1035 */ 1036 1037 inline RC setPos( sal_uInt32 uHow, sal_Int64 uPos ) 1038 { 1039 return (RC) osl_setFilePos( _pData, uHow, uPos ); 1040 } 1041 1042 /** Retrieve the current position of the internal pointer of an open file. 1043 1044 @param uPos [out] 1045 On success receives the current position of the file pointer. 1046 1047 @return 1048 E_None on success 1049 E_INVAL the format of the parameters was not valid 1050 E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files 1051 1052 @see open() 1053 @see setPos() 1054 @see read() 1055 @see write() 1056 */ 1057 1058 inline RC getPos( sal_uInt64& uPos ) 1059 { 1060 return (RC) osl_getFilePos( _pData, &uPos ); 1061 } 1062 1063 /** Test if the end of a file is reached. 1064 1065 @param pIsEOF [out] 1066 Points to a variable that receives the end-of-file status. 1067 1068 @return 1069 E_None on success 1070 E_INVAL the format of the parameters was not valid 1071 E_INTR function call was interrupted 1072 E_IO on I/O errors 1073 E_ISDIR is a directory 1074 E_BADF bad file 1075 E_FAULT bad address 1076 E_AGAIN operation would block 1077 E_NOLINK link has been severed 1078 1079 @see open() 1080 @see read() 1081 @see readLine() 1082 @see setPos() 1083 */ 1084 1085 inline RC isEndOfFile( sal_Bool *pIsEOF ) 1086 { 1087 return (RC) osl_isEndOfFile( _pData, pIsEOF ); 1088 } 1089 1090 /** Set the file size of an open file. 1091 1092 Sets the file size of an open file. The file can be truncated or enlarged by the function. 1093 The position of the file pointer is not affeced by this function. 1094 1095 @param uSize [in] 1096 New size in bytes. 1097 1098 @return 1099 E_None on success 1100 E_INVAL the format of the parameters was not valid 1101 E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files 1102 1103 @see open() 1104 @see setPos() 1105 @see getStatus() 1106 */ 1107 1108 inline RC setSize( sal_uInt64 uSize ) 1109 { 1110 return (RC) osl_setFileSize( _pData, uSize ); 1111 } 1112 1113 /** Get the file size of an open file. 1114 1115 Gets the file size of an open file. 1116 The position of the file pointer is not affeced by this function. 1117 1118 @param rSize [out] 1119 Current size in bytes. 1120 1121 @return 1122 E_None on success 1123 E_INVAL the format of the parameters was not valid 1124 E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files 1125 1126 @see open() 1127 @see setPos() 1128 @see getSize() 1129 @see setSize() 1130 @see getStatus() 1131 */ 1132 1133 inline RC getSize( sal_uInt64 &rSize ) 1134 { 1135 return (RC) osl_getFileSize( _pData, &rSize ); 1136 } 1137 1138 /** Read a number of bytes from a file. 1139 1140 Reads a number of bytes from a file. The internal file pointer is 1141 increased by the number of bytes read. 1142 1143 @param pBuffer [out] 1144 Points to a buffer which receives data. The buffer must be large enough 1145 to hold uBytesRequested bytes. 1146 1147 @param uBytesRequested [in] 1148 Number of bytes which should be retrieved. 1149 1150 @param rBytesRead [out] 1151 On success the number of bytes which have actually been retrieved. 1152 1153 @return 1154 E_None on success 1155 E_INVAL the format of the parameters was not valid 1156 E_INTR function call was interrupted 1157 E_IO on I/O errors 1158 E_ISDIR is a directory 1159 E_BADF bad file 1160 E_FAULT bad address 1161 E_AGAIN operation would block 1162 E_NOLINK link has been severed 1163 1164 @see open() 1165 @see write() 1166 @see readLine() 1167 @see setPos() 1168 */ 1169 1170 inline RC read( void *pBuffer, sal_uInt64 uBytesRequested, sal_uInt64& rBytesRead ) 1171 { 1172 return (RC) osl_readFile( _pData, pBuffer, uBytesRequested, &rBytesRead ); 1173 } 1174 1175 /** Write a number of bytes to a file. 1176 1177 Writes a number of bytes to a file. 1178 The internal file pointer is increased by the number of bytes read. 1179 1180 @param pBuffer [in] 1181 Points to a buffer which contains the data. 1182 1183 @param uBytesToWrite [in] 1184 Number of bytes which should be written. 1185 1186 @param rBytesWritten [out] 1187 On success the number of bytes which have actually been written. 1188 1189 @return 1190 E_None on success 1191 E_INVAL the format of the parameters was not valid 1192 E_FBIG file too large 1193 E_DQUOT quota exceeded 1194 E_AGAIN operation would block 1195 E_BADF bad file 1196 E_FAULT bad address 1197 E_INTR function call was interrupted 1198 E_IO on I/O errosr 1199 E_NOLCK no record locks available 1200 E_NOLINK link has been severed 1201 E_NOSPC no space left on device 1202 E_NXIO no such device or address 1203 1204 @see open() 1205 @see read() 1206 @see setPos() 1207 */ 1208 1209 inline RC write(const void *pBuffer, sal_uInt64 uBytesToWrite, sal_uInt64& rBytesWritten) 1210 { 1211 return (RC) osl_writeFile( _pData, pBuffer, uBytesToWrite, &rBytesWritten ); 1212 } 1213 1214 1215 /** Read a line from a file. 1216 1217 Reads a line from a file. The new line delimiter is NOT returned! 1218 1219 @param aSeq [in/out] 1220 A reference to a ::rtl::ByteSequence that will hold the line read on success. 1221 1222 @return 1223 E_None on success 1224 E_INVAL the format of the parameters was not valid 1225 E_INTR function call was interrupted 1226 E_IO on I/O errors 1227 E_ISDIR is a directory 1228 E_BADF bad file 1229 E_FAULT bad address 1230 E_AGAIN operation would block 1231 E_NOLINK link has been severed 1232 1233 @see open() 1234 @see read() 1235 @see write() 1236 @see setPos() 1237 */ 1238 1239 inline RC readLine( ::rtl::ByteSequence& aSeq ) 1240 { 1241 return (RC) osl_readLine( _pData, reinterpret_cast<sal_Sequence**>(&aSeq) ); 1242 } 1243 1244 /** Synchronize the memory representation of a file with that on the physical medium. 1245 1246 The function ensures that all modified data and attributes of the file associated with 1247 the given file handle have been written to the physical medium. 1248 In case the hard disk has a write cache enabled, the data may not really be on 1249 permanent storage when osl_syncFile returns. 1250 1251 @return 1252 <dl> 1253 <dt>E_None</dt> 1254 <dd>On success</dd> 1255 <dt>E_INVAL</dt> 1256 <dd>The value of the input parameter is invalid</dd> 1257 </dl> 1258 <br><p><strong>In addition to these error codes others may occur as well, for instance:</strong></p><br> 1259 <dt>E_BADF</dt> 1260 <dd>The file is not open for writing</dd> 1261 <dt>E_IO</dt> 1262 <dd>An I/O error occurred</dd> 1263 <dt>E_NOSPC</dt> 1264 <dd>There is no enough space on the target device</dd> 1265 <dt>E_ROFS</dt> 1266 <dd>The file is located on a read only file system</dd> 1267 <dt>E_TIMEDOUT</dt> 1268 <dd>A remote connection timed out. This may happen when a file is on a remote location</dd> 1269 </dl> 1270 1271 @see osl_syncFile() 1272 @see open() 1273 @see write() 1274 */ 1275 inline RC sync() const 1276 { 1277 OSL_PRECOND(_pData, "File::sync(): File not open"); 1278 return (RC)osl_syncFile(_pData); 1279 } 1280 1281 /** Copy a file to a new destination. 1282 1283 Copies a file to a new destination. Copies only files not directories. 1284 No assumptions should be made about preserving attributes or file time. 1285 1286 @param ustrSourceFileURL [in] 1287 Full qualified URL of the source file. 1288 1289 @param ustrDestFileURL [in] 1290 Full qualified URL of the destination file. A directory is NOT a valid destination file! 1291 1292 @return 1293 E_None on success 1294 E_INVAL the format of the parameters was not valid 1295 E_NOMEM not enough memory for allocating structures 1296 E_ACCES permission denied 1297 E_PERM operation not permitted 1298 E_NAMETOOLONG file name too long 1299 E_NOENT no such file or directory 1300 E_ISDIR is a directory 1301 E_ROFS read-only file system 1302 1303 @see move() 1304 @see remove() 1305 */ 1306 1307 inline static RC copy( const ::rtl::OUString& ustrSourceFileURL, const ::rtl::OUString& ustrDestFileURL ) 1308 { 1309 return (RC) osl_copyFile( ustrSourceFileURL.pData, ustrDestFileURL.pData ); 1310 } 1311 1312 /** Move a file or directory to a new destination or renames it. 1313 1314 Moves a file or directory to a new destination or renames it. 1315 File time and attributes are preserved. 1316 1317 @param ustrSourceFileURL [in] 1318 Full qualified URL of the source file. 1319 1320 @param ustrDestFileURL [in] 1321 Full qualified URL of the destination file. An existing directory is NOT a valid destination ! 1322 1323 @return 1324 E_None on success 1325 E_INVAL the format of the parameters was not valid 1326 E_NOMEM not enough memory for allocating structures 1327 E_ACCES permission denied 1328 E_PERM operation not permitted 1329 E_NAMETOOLONG file name too long 1330 E_NOENT no such file or directory 1331 E_ROFS read-only file system 1332 1333 @see copy() 1334 */ 1335 1336 inline static RC move( const ::rtl::OUString& ustrSourceFileURL, const ::rtl::OUString& ustrDestFileURL ) 1337 { 1338 return (RC) osl_moveFile( ustrSourceFileURL.pData, ustrDestFileURL.pData ); 1339 } 1340 1341 /** Remove a regular file. 1342 1343 @param ustrFileURL [in] 1344 Full qualified URL of the file to remove. 1345 1346 @return 1347 E_None on success 1348 E_INVAL the format of the parameters was not valid 1349 E_NOMEM not enough memory for allocating structures 1350 E_ACCES permission denied 1351 E_PERM operation not permitted 1352 E_NAMETOOLONG file name too long 1353 E_NOENT no such file or directory 1354 E_ISDIR is a directory 1355 E_ROFS read-only file system 1356 E_FAULT bad address 1357 E_LOOP too many symbolic links encountered 1358 E_IO on I/O errors 1359 E_BUSY device or resource busy 1360 E_INTR function call was interrupted 1361 E_LOOP too many symbolic links encountered 1362 E_MULTIHOP multihop attempted 1363 E_NOLINK link has been severed 1364 E_TXTBSY text file busy 1365 1366 @see open() 1367 */ 1368 1369 inline static RC remove( const ::rtl::OUString& ustrFileURL ) 1370 { 1371 return (RC) osl_removeFile( ustrFileURL.pData ); 1372 } 1373 1374 /** Set file attributes. 1375 1376 @param ustrFileURL [in] 1377 The full qualified file URL. 1378 1379 @param uAttributes [in] 1380 Attributes of the file to be set. 1381 1382 @return 1383 E_None on success 1384 E_INVAL the format of the parameters was not valid 1385 1386 @see FileStatus 1387 */ 1388 1389 inline static RC setAttributes( const ::rtl::OUString& ustrFileURL, sal_uInt64 uAttributes ) 1390 { 1391 return (RC) osl_setFileAttributes( ustrFileURL.pData, uAttributes ); 1392 } 1393 1394 /** Set the file time. 1395 1396 @param ustrFileURL [in] 1397 The full qualified URL of the file. 1398 1399 @param rCreationTime [in] 1400 Creation time of the given file. 1401 1402 @param rLastAccessTime [in] 1403 Time of the last access of the given file. 1404 1405 @param rLastWriteTime [in] 1406 Time of the last modifying of the given file. 1407 1408 @return 1409 E_None on success 1410 E_INVAL the format of the parameters was not valid 1411 E_NOENT no such file or directory not found 1412 1413 @see FileStatus 1414 */ 1415 1416 inline static RC setTime( 1417 const ::rtl::OUString& ustrFileURL, 1418 const TimeValue& rCreationTime, 1419 const TimeValue& rLastAccessTime, 1420 const TimeValue& rLastWriteTime ) 1421 { 1422 return (RC) osl_setFileTime( 1423 ustrFileURL.pData, 1424 &rCreationTime, 1425 &rLastAccessTime, 1426 &rLastWriteTime ); 1427 } 1428 1429 friend class DirectoryItem; 1430 }; 1431 1432 // ----------------------------------------------------------------------------- 1433 /** The directory item class object provides access to file status information. 1434 1435 @see FileStatus 1436 */ 1437 1438 class DirectoryItem: public FileBase 1439 { 1440 oslDirectoryItem _pData; 1441 1442 public: 1443 1444 /** Constructor. 1445 */ 1446 1447 DirectoryItem(): _pData( NULL ) 1448 { 1449 } 1450 1451 /** Copy constructor. 1452 */ 1453 1454 DirectoryItem( const DirectoryItem& rItem ): _pData( rItem._pData) 1455 { 1456 if( _pData ) 1457 osl_acquireDirectoryItem( _pData ); 1458 } 1459 1460 /** Destructor. 1461 */ 1462 1463 ~DirectoryItem() 1464 { 1465 if( _pData ) 1466 osl_releaseDirectoryItem( _pData ); 1467 } 1468 1469 /** Assignment operator. 1470 */ 1471 1472 DirectoryItem& operator=(const DirectoryItem& rItem ) 1473 { 1474 if (&rItem != this) 1475 { 1476 if( _pData ) 1477 osl_releaseDirectoryItem( _pData ); 1478 1479 _pData = rItem._pData; 1480 1481 if( _pData ) 1482 osl_acquireDirectoryItem( _pData ); 1483 } 1484 return *this; 1485 } 1486 1487 /** Check for validity of this instance. 1488 1489 @return 1490 sal_True if object is valid directory item else sal_False. 1491 */ 1492 1493 inline sal_Bool is() 1494 { 1495 return _pData != NULL; 1496 } 1497 1498 /** Retrieve a single directory item. 1499 1500 Retrieves a single directory item. The returned handle has an initial refcount of 1. 1501 Due to performance issues it is not recommended to use this function while 1502 enumerating the contents of a directory. In this case use osl_getNextDirectoryItem() instead. 1503 1504 @param ustrFileURL [in] 1505 An absolute file URL. 1506 1507 @param rItem [out] 1508 On success it receives a handle which can be used for subsequent calls to osl_getFileStatus(). 1509 The handle has to be released by a call to osl_releaseDirectoryItem(). 1510 1511 @return 1512 E_None on success 1513 E_INVAL the format of the parameters was not valid 1514 E_NOMEM not enough memory for allocating structures 1515 E_ACCES permission denied 1516 E_MFILE too many open files used by the process 1517 E_NFILE too many open files in the system 1518 E_NOENT no such file or directory 1519 E_LOOP too many symbolic links encountered 1520 E_NAMETOOLONG the file name is too long 1521 E_NOTDIR a component of the path prefix of path is not a directory 1522 E_IO on I/O errors 1523 E_MULTIHOP multihop attempted 1524 E_NOLINK link has been severed 1525 E_FAULT bad address 1526 E_INTR the function call was interrupted 1527 1528 @see FileStatus 1529 @see Directory::getNextItem() 1530 */ 1531 1532 static inline RC get( const ::rtl::OUString& ustrFileURL, DirectoryItem& rItem ) 1533 { 1534 if( rItem._pData) 1535 { 1536 osl_releaseDirectoryItem( rItem._pData ); 1537 rItem._pData = NULL; 1538 } 1539 1540 return (RC) osl_getDirectoryItem( ustrFileURL.pData, &rItem._pData ); 1541 } 1542 1543 /** Retrieve information about a single file or directory. 1544 1545 @param rStatus [in|out] 1546 Reference to a class which receives the information of the file or directory 1547 represented by this directory item. 1548 1549 @return 1550 E_None on success 1551 E_NOMEM not enough memory for allocating structures 1552 E_INVAL the format of the parameters was not valid 1553 E_LOOP too many symbolic links encountered 1554 E_ACCES permission denied 1555 E_NOENT no such file or directory 1556 E_NAMETOOLONG file name too long 1557 E_BADF invalid oslDirectoryItem parameter 1558 E_FAULT bad address 1559 E_OVERFLOW value too large for defined data type 1560 E_INTR function call was interrupted 1561 E_NOLINK link has been severed 1562 E_MULTIHOP components of path require hopping to multiple remote machines and the file system does not allow it 1563 E_MFILE too many open files used by the process 1564 E_NFILE too many open files in the system 1565 E_NOSPC no space left on device 1566 E_NXIO no such device or address 1567 E_IO on I/O errors 1568 E_NOSYS function not implemented 1569 1570 @see get() 1571 @see Directory::getNextItem() 1572 @see FileStatus 1573 */ 1574 1575 inline RC getFileStatus( FileStatus& rStatus ) 1576 { 1577 return (RC) osl_getFileStatus( _pData, &rStatus._aStatus, rStatus._nMask ); 1578 } 1579 1580 friend class Directory; 1581 }; 1582 1583 //########################################### 1584 1585 /** Base class for observers of directory creation notifications. 1586 1587 Clients which uses the method createDirectoryPath of the class 1588 Directory may want to be informed about the directories that 1589 have been created. This may be accomplished by deriving from 1590 this base class and overwriting the virtual function 1591 DirectoryCreated. 1592 1593 @see Directory::createPath 1594 */ 1595 class DirectoryCreationObserver 1596 { 1597 public: 1598 virtual ~DirectoryCreationObserver() {}; 1599 1600 /** This method will be called when a new directory has been 1601 created and needs to be overwritten by derived classes. 1602 You must not delete the directory that was just created 1603 otherwise you will run into an endless loop. 1604 1605 @param aDirectoryUrl 1606 [in]The absolute file URL of the directory that was just created by 1607 ::osl::Directory::createPath. 1608 */ 1609 virtual void DirectoryCreated(const rtl::OUString& aDirectoryUrl) = 0; 1610 }; 1611 1612 //########################################### 1613 // This just an internal helper function for 1614 // private use. 1615 extern "C" inline void SAL_CALL onDirectoryCreated(void* pData, rtl_uString* aDirectoryUrl) 1616 { 1617 (static_cast<DirectoryCreationObserver*>(pData))->DirectoryCreated(aDirectoryUrl); 1618 } 1619 1620 /** The directory class object provides a enumeration of DirectoryItems. 1621 1622 @see DirectoryItem 1623 @see File 1624 */ 1625 1626 class Directory: public FileBase 1627 { 1628 oslDirectory _pData; 1629 ::rtl::OUString _aPath; 1630 1631 /** Copy constructor. 1632 */ 1633 1634 Directory( Directory& ); 1635 1636 /** Assignment operator. 1637 */ 1638 1639 Directory& operator = ( Directory& ); 1640 1641 public: 1642 1643 /** Constructor. 1644 1645 @param strPath [in] 1646 The full qualified URL of the directory. 1647 Relative URLs are not allowed. 1648 */ 1649 1650 Directory( const ::rtl::OUString& strPath ): _pData( 0 ), _aPath( strPath ) 1651 { 1652 } 1653 1654 /** Destructor. 1655 */ 1656 1657 ~Directory() 1658 { 1659 close(); 1660 } 1661 1662 /** Open a directory for enumerating its contents. 1663 1664 @return 1665 E_None on success 1666 E_INVAL the format of the parameters was not valid 1667 E_NOENT the specified path doesn't exist 1668 E_NOTDIR the specified path is not an directory 1669 E_NOMEM not enough memory for allocating structures 1670 E_ACCES permission denied 1671 E_MFILE too many open files used by the process 1672 E_NFILE too many open files in the system 1673 E_NAMETOOLONG File name too long 1674 E_LOOP Too many symbolic links encountered 1675 1676 @see getNextItem() 1677 @see close() 1678 */ 1679 1680 inline RC open() 1681 { 1682 return (RC) osl_openDirectory( _aPath.pData, &_pData ); 1683 } 1684 1685 /** Query if directory is open. 1686 1687 Query if directory is open and so item enumeration is valid. 1688 1689 @return 1690 sal_True if the directory is open else sal_False. 1691 1692 @see open() 1693 @see close() 1694 */ 1695 1696 inline sal_Bool isOpen() { return _pData != NULL; }; 1697 1698 /** Close a directory. 1699 1700 @return 1701 E_None on success 1702 E_INVAL the format of the parameters was not valid 1703 E_NOMEM not enough memory for allocating structures 1704 E_BADF invalid oslDirectory parameter 1705 E_INTR the function call was interrupted 1706 1707 @see open() 1708 */ 1709 1710 inline RC close() 1711 { 1712 oslFileError Error = osl_File_E_BADF; 1713 1714 if( _pData ) 1715 { 1716 Error=osl_closeDirectory( _pData ); 1717 _pData = NULL; 1718 } 1719 1720 return (RC) Error; 1721 } 1722 1723 1724 /** Resets the directory item enumeration to the beginning. 1725 1726 @return 1727 E_None on success 1728 E_INVAL the format of the parameters was not valid 1729 E_NOENT the specified path doesn't exist 1730 E_NOTDIR the specified path is not an directory 1731 E_NOMEM not enough memory for allocating structures 1732 E_ACCES permission denied 1733 E_MFILE too many open files used by the process 1734 E_NFILE too many open files in the system 1735 E_NAMETOOLONG File name too long 1736 E_LOOP Too many symbolic links encountered 1737 1738 @see open() 1739 */ 1740 1741 inline RC reset() 1742 { 1743 close(); 1744 return open(); 1745 } 1746 1747 /** Retrieve the next item of a previously opened directory. 1748 1749 Retrieves the next item of a previously opened directory. 1750 1751 @param rItem [out] 1752 On success a valid DirectoryItem. 1753 1754 @param nHint [in] 1755 With this parameter the caller can tell the implementation that (s)he 1756 is going to call this function uHint times afterwards. This enables the implementation to 1757 get the information for more than one file and cache it until the next calls. 1758 1759 @return 1760 E_None on success 1761 E_INVAL the format of the parameters was not valid 1762 E_NOMEM not enough memory for allocating structures 1763 E_NOENT no more entries in this directory 1764 E_BADF invalid oslDirectory parameter 1765 E_OVERFLOW the value too large for defined data type 1766 1767 @see DirectoryItem 1768 */ 1769 1770 inline RC getNextItem( DirectoryItem& rItem, sal_uInt32 nHint = 0 ) 1771 { 1772 if( rItem._pData ) 1773 { 1774 osl_releaseDirectoryItem( rItem._pData ); 1775 rItem._pData = 0; 1776 } 1777 return ( RC) osl_getNextDirectoryItem( _pData, &rItem._pData, nHint ); 1778 } 1779 1780 1781 /** Retrieve information about a volume. 1782 1783 Retrieves information about a volume. A volume can either be a mount point, a network 1784 resource or a drive depending on Operating System and File System. 1785 1786 @param ustrDirectoryURL [in] 1787 Full qualified URL of the volume 1788 1789 @param rInfo [out] 1790 On success it receives information about the volume. 1791 1792 @return 1793 E_None on success 1794 E_NOMEM not enough memory for allocating structures 1795 E_INVAL the format of the parameters was not valid 1796 E_NOTDIR not a directory 1797 E_NAMETOOLONG file name too long 1798 E_NOENT no such file or directory 1799 E_ACCES permission denied 1800 E_LOOP too many symbolic links encountered 1801 E_FAULT Bad address 1802 E_IO on I/O errors 1803 E_NOSYS function not implemented 1804 E_MULTIHOP multihop attempted 1805 E_NOLINK link has been severed 1806 E_INTR function call was interrupted 1807 1808 @see FileStatus 1809 @see VolumeInfo 1810 */ 1811 1812 inline static RC getVolumeInfo( const ::rtl::OUString& ustrDirectoryURL, VolumeInfo& rInfo ) 1813 { 1814 return (RC) osl_getVolumeInformation( ustrDirectoryURL.pData, &rInfo._aInfo, rInfo._nMask ); 1815 } 1816 1817 /** Create a directory. 1818 1819 @param ustrDirectoryURL [in] 1820 Full qualified URL of the directory to create. 1821 1822 @return 1823 E_None on success 1824 E_INVAL the format of the parameters was not valid 1825 E_NOMEM not enough memory for allocating structures 1826 E_EXIST file exists 1827 E_ACCES permission denied 1828 E_NAMETOOLONG file name too long 1829 E_NOENT no such file or directory 1830 E_NOTDIR not a directory 1831 E_ROFS read-only file system 1832 E_NOSPC no space left on device 1833 E_DQUOT quota exceeded 1834 E_LOOP too many symbolic links encountered 1835 E_FAULT bad address 1836 E_IO on I/O errors 1837 E_MLINK too many links 1838 E_MULTIHOP multihop attempted 1839 E_NOLINK link has been severed 1840 1841 @see remove() 1842 */ 1843 1844 inline static RC create( const ::rtl::OUString& ustrDirectoryURL ) 1845 { 1846 return (RC) osl_createDirectory( ustrDirectoryURL.pData ); 1847 } 1848 1849 /** Remove an empty directory. 1850 1851 @param ustrDirectoryURL [in] 1852 Full qualified URL of the directory. 1853 1854 @return 1855 E_None on success 1856 E_INVAL the format of the parameters was not valid 1857 E_NOMEM not enough memory for allocating structures 1858 E_PERM operation not permitted 1859 E_ACCES permission denied 1860 E_NOENT no such file or directory 1861 E_NOTDIR not a directory 1862 E_NOTEMPTY directory not empty 1863 E_FAULT bad address 1864 E_NAMETOOLONG file name too long 1865 E_BUSY device or resource busy 1866 E_ROFS read-only file system 1867 E_LOOP too many symbolic links encountered 1868 E_BUSY device or resource busy 1869 E_EXIST file exists 1870 E_IO on I/O errors 1871 E_MULTIHOP multihop attempted 1872 E_NOLINK link has been severed 1873 1874 @see create() 1875 */ 1876 1877 inline static RC remove( const ::rtl::OUString& ustrDirectoryURL ) 1878 { 1879 return (RC) osl_removeDirectory( ustrDirectoryURL.pData ); 1880 } 1881 1882 /** Create a directory path. 1883 1884 The osl_createDirectoryPath function creates a specified directory path. 1885 All nonexisting sub directories will be created. 1886 <p><strong>PLEASE NOTE:</strong> You cannot rely on getting the error code 1887 E_EXIST for existing directories. Programming against this error code is 1888 in general a strong indication of a wrong usage of osl_createDirectoryPath.</p> 1889 1890 @param aDirectoryUrl 1891 [in] The absolute file URL of the directory path to create. 1892 A relative file URL will not be accepted. 1893 1894 @param aDirectoryCreationObserver 1895 [in] Pointer to an instance of type DirectoryCreationObserver that will 1896 be informed about the creation of a directory. The value of this 1897 parameter may be NULL, in this case notifications will not be sent. 1898 1899 @return 1900 <dl> 1901 <dt>E_None</dt> 1902 <dd>On success</dd> 1903 <dt>E_INVAL</dt> 1904 <dd>The format of the parameters was not valid</dd> 1905 <dt>E_ACCES</dt> 1906 <dd>Permission denied</dd> 1907 <dt>E_EXIST</dt> 1908 <dd>The final node of the specified directory path already exist</dd> 1909 <dt>E_NAMETOOLONG</dt> 1910 <dd>The name of the specified directory path exceeds the maximum allowed length</dd> 1911 <dt>E_NOTDIR</dt> 1912 <dd>A component of the specified directory path already exist as file in any part of the directory path</dd> 1913 <dt>E_ROFS</dt> 1914 <dd>Read-only file system</dd> 1915 <dt>E_NOSPC</dt> 1916 <dd>No space left on device</dd> 1917 <dt>E_DQUOT</dt> 1918 <dd>Quota exceeded</dd> 1919 <dt>E_FAULT</dt> 1920 <dd>Bad address</dd> 1921 <dt>E_IO</dt> 1922 <dd>I/O error</dd> 1923 <dt>E_LOOP</dt> 1924 <dd>Too many symbolic links encountered</dd> 1925 <dt>E_NOLINK</dt> 1926 <dd>Link has been severed</dd> 1927 <dt>E_invalidError</dt> 1928 <dd>An unknown error occurred</dd> 1929 </dl> 1930 1931 @see DirectoryCreationObserver 1932 @see create 1933 */ 1934 static RC createPath( 1935 const ::rtl::OUString& aDirectoryUrl, 1936 DirectoryCreationObserver* aDirectoryCreationObserver = NULL) 1937 { 1938 return (RC)osl_createDirectoryPath( 1939 aDirectoryUrl.pData, 1940 (aDirectoryCreationObserver) ? onDirectoryCreated : NULL, 1941 aDirectoryCreationObserver); 1942 } 1943 }; 1944 1945 } /* namespace osl */ 1946 1947 #endif /* __cplusplus */ 1948 #endif /* _OSL_FILE_HXX_ */ 1949 1950