1<?xml version="1.0" encoding="UTF-8"?> 2<!--*********************************************************** 3 * 4 * Licensed to the Apache Software Foundation (ASF) under one 5 * or more contributor license agreements. See the NOTICE file 6 * distributed with this work for additional information 7 * regarding copyright ownership. The ASF licenses this file 8 * to you under the Apache License, Version 2.0 (the 9 * "License"); you may not use this file except in compliance 10 * with the License. You may obtain a copy of the License at 11 * 12 * http://www.apache.org/licenses/LICENSE-2.0 13 * 14 * Unless required by applicable law or agreed to in writing, 15 * software distributed under the License is distributed on an 16 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 17 * KIND, either express or implied. See the License for the 18 * specific language governing permissions and limitations 19 * under the License. 20 * 21 ***********************************************************--> 22<!-- 23*** GENERATED FROM project.xml - DO NOT EDIT *** 24*** EDIT ../build.xml INSTEAD *** 25 26For the purpose of easier reading the script 27is divided into following sections: 28 29 - initialization 30 - compilation 31 - jar 32 - execution 33 - debugging 34 - javadoc 35 - junit compilation 36 - junit execution 37 - junit debugging 38 - applet 39 - cleanup 40 41 --> 42<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="ConvwatchGUIProject-impl"> 43 <fail message="Please build using Ant 1.7.1 or higher."> 44 <condition> 45 <not> 46 <antversion atleast="1.7.1"/> 47 </not> 48 </condition> 49 </fail> 50 <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/> 51 <!-- 52 ====================== 53 INITIALIZATION SECTION 54 ====================== 55 --> 56 <target name="-pre-init"> 57 <!-- Empty placeholder for easier customization. --> 58 <!-- You can override this target in the ../build.xml file. --> 59 </target> 60 <target depends="-pre-init" name="-init-private"> 61 <property file="nbproject/private/config.properties"/> 62 <property file="nbproject/private/configs/${config}.properties"/> 63 <property file="nbproject/private/private.properties"/> 64 </target> 65 <target depends="-pre-init,-init-private" name="-init-user"> 66 <property file="${user.properties.file}"/> 67 <!-- The two properties below are usually overridden --> 68 <!-- by the active platform. Just a fallback. --> 69 <property name="default.javac.source" value="1.4"/> 70 <property name="default.javac.target" value="1.4"/> 71 </target> 72 <target depends="-pre-init,-init-private,-init-user" name="-init-project"> 73 <property file="nbproject/configs/${config}.properties"/> 74 <property file="nbproject/project.properties"/> 75 </target> 76 <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init"> 77 <available file="${manifest.file}" property="manifest.available"/> 78 <condition property="main.class.available"> 79 <and> 80 <isset property="main.class"/> 81 <not> 82 <equals arg1="${main.class}" arg2="" trim="true"/> 83 </not> 84 </and> 85 </condition> 86 <condition property="manifest.available+main.class"> 87 <and> 88 <isset property="manifest.available"/> 89 <isset property="main.class.available"/> 90 </and> 91 </condition> 92 <condition property="do.mkdist"> 93 <and> 94 <isset property="libs.CopyLibs.classpath"/> 95 <not> 96 <istrue value="${mkdist.disabled}"/> 97 </not> 98 </and> 99 </condition> 100 <condition property="manifest.available+main.class+mkdist.available"> 101 <and> 102 <istrue value="${manifest.available+main.class}"/> 103 <isset property="do.mkdist"/> 104 </and> 105 </condition> 106 <condition property="manifest.available+mkdist.available"> 107 <and> 108 <istrue value="${manifest.available}"/> 109 <isset property="do.mkdist"/> 110 </and> 111 </condition> 112 <condition property="manifest.available-mkdist.available"> 113 <or> 114 <istrue value="${manifest.available}"/> 115 <isset property="do.mkdist"/> 116 </or> 117 </condition> 118 <condition property="manifest.available+main.class-mkdist.available"> 119 <or> 120 <istrue value="${manifest.available+main.class}"/> 121 <isset property="do.mkdist"/> 122 </or> 123 </condition> 124 <condition property="have.tests"> 125 <or> 126 <available file="${test.src.dir}"/> 127 </or> 128 </condition> 129 <condition property="have.sources"> 130 <or> 131 <available file="${src.dir}"/> 132 </or> 133 </condition> 134 <condition property="netbeans.home+have.tests"> 135 <and> 136 <isset property="netbeans.home"/> 137 <isset property="have.tests"/> 138 </and> 139 </condition> 140 <condition property="no.javadoc.preview"> 141 <and> 142 <isset property="javadoc.preview"/> 143 <isfalse value="${javadoc.preview}"/> 144 </and> 145 </condition> 146 <property name="run.jvmargs" value=""/> 147 <property name="javac.compilerargs" value=""/> 148 <property name="work.dir" value="${basedir}"/> 149 <condition property="no.deps"> 150 <and> 151 <istrue value="${no.dependencies}"/> 152 </and> 153 </condition> 154 <property name="javac.debug" value="true"/> 155 <property name="javadoc.preview" value="true"/> 156 <property name="application.args" value=""/> 157 <property name="source.encoding" value="${file.encoding}"/> 158 <property name="runtime.encoding" value="${source.encoding}"/> 159 <condition property="javadoc.encoding.used" value="${javadoc.encoding}"> 160 <and> 161 <isset property="javadoc.encoding"/> 162 <not> 163 <equals arg1="${javadoc.encoding}" arg2=""/> 164 </not> 165 </and> 166 </condition> 167 <property name="javadoc.encoding.used" value="${source.encoding}"/> 168 <property name="includes" value="**"/> 169 <property name="excludes" value=""/> 170 <property name="do.depend" value="false"/> 171 <condition property="do.depend.true"> 172 <istrue value="${do.depend}"/> 173 </condition> 174 <path id="endorsed.classpath.path" path="${endorsed.classpath}"/> 175 <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'"> 176 <length length="0" string="${endorsed.classpath}" when="greater"/> 177 </condition> 178 <property name="javac.fork" value="false"/> 179 </target> 180 <target name="-post-init"> 181 <!-- Empty placeholder for easier customization. --> 182 <!-- You can override this target in the ../build.xml file. --> 183 </target> 184 <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check"> 185 <fail unless="src.dir">Must set src.dir</fail> 186 <fail unless="test.src.dir">Must set test.src.dir</fail> 187 <fail unless="build.dir">Must set build.dir</fail> 188 <fail unless="dist.dir">Must set dist.dir</fail> 189 <fail unless="build.classes.dir">Must set build.classes.dir</fail> 190 <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail> 191 <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail> 192 <fail unless="build.test.results.dir">Must set build.test.results.dir</fail> 193 <fail unless="build.classes.excludes">Must set build.classes.excludes</fail> 194 <fail unless="dist.jar">Must set dist.jar</fail> 195 </target> 196 <target name="-init-macrodef-property"> 197 <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1"> 198 <attribute name="name"/> 199 <attribute name="value"/> 200 <sequential> 201 <property name="@{name}" value="${@{value}}"/> 202 </sequential> 203 </macrodef> 204 </target> 205 <target name="-init-macrodef-javac"> 206 <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> 207 <attribute default="${src.dir}" name="srcdir"/> 208 <attribute default="${build.classes.dir}" name="destdir"/> 209 <attribute default="${javac.classpath}" name="classpath"/> 210 <attribute default="${includes}" name="includes"/> 211 <attribute default="${excludes}" name="excludes"/> 212 <attribute default="${javac.debug}" name="debug"/> 213 <attribute default="${empty.dir}" name="sourcepath"/> 214 <attribute default="${empty.dir}" name="gensrcdir"/> 215 <element name="customize" optional="true"/> 216 <sequential> 217 <property location="${build.dir}/empty" name="empty.dir"/> 218 <mkdir dir="${empty.dir}"/> 219 <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> 220 <src> 221 <dirset dir="@{gensrcdir}" erroronmissingdir="false"> 222 <include name="*"/> 223 </dirset> 224 </src> 225 <classpath> 226 <path path="@{classpath}"/> 227 </classpath> 228 <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> 229 <compilerarg line="${javac.compilerargs}"/> 230 <customize/> 231 </javac> 232 </sequential> 233 </macrodef> 234 <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3"> 235 <attribute default="${src.dir}" name="srcdir"/> 236 <attribute default="${build.classes.dir}" name="destdir"/> 237 <attribute default="${javac.classpath}" name="classpath"/> 238 <sequential> 239 <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}"> 240 <classpath> 241 <path path="@{classpath}"/> 242 </classpath> 243 </depend> 244 </sequential> 245 </macrodef> 246 <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3"> 247 <attribute default="${build.classes.dir}" name="destdir"/> 248 <sequential> 249 <fail unless="javac.includes">Must set javac.includes</fail> 250 <pathconvert pathsep="," property="javac.includes.binary"> 251 <path> 252 <filelist dir="@{destdir}" files="${javac.includes}"/> 253 </path> 254 <globmapper from="*.java" to="*.class"/> 255 </pathconvert> 256 <delete> 257 <files includes="${javac.includes.binary}"/> 258 </delete> 259 </sequential> 260 </macrodef> 261 </target> 262 <target name="-init-macrodef-junit"> 263 <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3"> 264 <attribute default="${includes}" name="includes"/> 265 <attribute default="${excludes}" name="excludes"/> 266 <attribute default="**" name="testincludes"/> 267 <sequential> 268 <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${build.dir}"> 269 <batchtest todir="${build.test.results.dir}"> 270 <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}"> 271 <filename name="@{testincludes}"/> 272 </fileset> 273 </batchtest> 274 <classpath> 275 <path path="${run.test.classpath}"/> 276 </classpath> 277 <syspropertyset> 278 <propertyref prefix="test-sys-prop."/> 279 <mapper from="test-sys-prop.*" to="*" type="glob"/> 280 </syspropertyset> 281 <formatter type="brief" usefile="false"/> 282 <formatter type="xml"/> 283 <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> 284 <jvmarg line="${run.jvmargs}"/> 285 </junit> 286 </sequential> 287 </macrodef> 288 </target> 289 <target depends="-init-debug-args" name="-init-macrodef-nbjpda"> 290 <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1"> 291 <attribute default="${main.class}" name="name"/> 292 <attribute default="${debug.classpath}" name="classpath"/> 293 <attribute default="" name="stopclassname"/> 294 <sequential> 295 <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}"> 296 <classpath> 297 <path path="@{classpath}"/> 298 </classpath> 299 </nbjpdastart> 300 </sequential> 301 </macrodef> 302 <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1"> 303 <attribute default="${build.classes.dir}" name="dir"/> 304 <sequential> 305 <nbjpdareload> 306 <fileset dir="@{dir}" includes="${fix.classes}"> 307 <include name="${fix.includes}*.class"/> 308 </fileset> 309 </nbjpdareload> 310 </sequential> 311 </macrodef> 312 </target> 313 <target name="-init-debug-args"> 314 <property name="version-output" value="java version "${ant.java.version}"/> 315 <condition property="have-jdk-older-than-1.4"> 316 <or> 317 <contains string="${version-output}" substring="java version "1.0"/> 318 <contains string="${version-output}" substring="java version "1.1"/> 319 <contains string="${version-output}" substring="java version "1.2"/> 320 <contains string="${version-output}" substring="java version "1.3"/> 321 </or> 322 </condition> 323 <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none"> 324 <istrue value="${have-jdk-older-than-1.4}"/> 325 </condition> 326 <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem"> 327 <os family="windows"/> 328 </condition> 329 <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}"> 330 <isset property="debug.transport"/> 331 </condition> 332 </target> 333 <target depends="-init-debug-args" name="-init-macrodef-debug"> 334 <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3"> 335 <attribute default="${main.class}" name="classname"/> 336 <attribute default="${debug.classpath}" name="classpath"/> 337 <element name="customize" optional="true"/> 338 <sequential> 339 <java classname="@{classname}" dir="${work.dir}" fork="true"> 340 <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> 341 <jvmarg line="${debug-args-line}"/> 342 <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/> 343 <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> 344 <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> 345 <jvmarg line="${run.jvmargs}"/> 346 <classpath> 347 <path path="@{classpath}"/> 348 </classpath> 349 <syspropertyset> 350 <propertyref prefix="run-sys-prop."/> 351 <mapper from="run-sys-prop.*" to="*" type="glob"/> 352 </syspropertyset> 353 <customize/> 354 </java> 355 </sequential> 356 </macrodef> 357 </target> 358 <target name="-init-macrodef-java"> 359 <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1"> 360 <attribute default="${main.class}" name="classname"/> 361 <attribute default="${run.classpath}" name="classpath"/> 362 <element name="customize" optional="true"/> 363 <sequential> 364 <java classname="@{classname}" dir="${work.dir}" fork="true"> 365 <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> 366 <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> 367 <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> 368 <jvmarg line="${run.jvmargs}"/> 369 <classpath> 370 <path path="@{classpath}"/> 371 </classpath> 372 <syspropertyset> 373 <propertyref prefix="run-sys-prop."/> 374 <mapper from="run-sys-prop.*" to="*" type="glob"/> 375 </syspropertyset> 376 <customize/> 377 </java> 378 </sequential> 379 </macrodef> 380 </target> 381 <target name="-init-presetdef-jar"> 382 <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1"> 383 <jar compress="${jar.compress}" jarfile="${dist.jar}"> 384 <j2seproject1:fileset dir="${build.classes.dir}"/> 385 </jar> 386 </presetdef> 387 </target> 388 <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/> 389 <!-- 390 =================== 391 COMPILATION SECTION 392 =================== 393 --> 394 <target name="-deps-jar-init" unless="built-jar.properties"> 395 <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/> 396 <delete file="${built-jar.properties}" quiet="true"/> 397 </target> 398 <target if="already.built.jar.${basedir}" name="-warn-already-built-jar"> 399 <echo level="warn" message="Cycle detected: ConvwatchGUIProject was already built"/> 400 </target> 401 <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps"> 402 <mkdir dir="${build.dir}"/> 403 <touch file="${built-jar.properties}" verbose="false"/> 404 <property file="${built-jar.properties}" prefix="already.built.jar."/> 405 <antcall target="-warn-already-built-jar"/> 406 <propertyfile file="${built-jar.properties}"> 407 <entry key="${basedir}" value=""/> 408 </propertyfile> 409 </target> 410 <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/> 411 <target depends="init" name="-check-automatic-build"> 412 <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/> 413 </target> 414 <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build"> 415 <antcall target="clean"/> 416 </target> 417 <target depends="init,deps-jar" name="-pre-pre-compile"> 418 <mkdir dir="${build.classes.dir}"/> 419 </target> 420 <target name="-pre-compile"> 421 <!-- Empty placeholder for easier customization. --> 422 <!-- You can override this target in the ../build.xml file. --> 423 </target> 424 <target if="do.depend.true" name="-compile-depend"> 425 <pathconvert property="build.generated.subdirs"> 426 <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false"> 427 <include name="*"/> 428 </dirset> 429 </pathconvert> 430 <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/> 431 </target> 432 <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile"> 433 <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/> 434 <copy todir="${build.classes.dir}"> 435 <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> 436 </copy> 437 </target> 438 <target name="-post-compile"> 439 <!-- Empty placeholder for easier customization. --> 440 <!-- You can override this target in the ../build.xml file. --> 441 </target> 442 <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/> 443 <target name="-pre-compile-single"> 444 <!-- Empty placeholder for easier customization. --> 445 <!-- You can override this target in the ../build.xml file. --> 446 </target> 447 <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single"> 448 <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> 449 <j2seproject3:force-recompile/> 450 <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/> 451 </target> 452 <target name="-post-compile-single"> 453 <!-- Empty placeholder for easier customization. --> 454 <!-- You can override this target in the ../build.xml file. --> 455 </target> 456 <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/> 457 <!-- 458 ==================== 459 JAR BUILDING SECTION 460 ==================== 461 --> 462 <target depends="init" name="-pre-pre-jar"> 463 <dirname file="${dist.jar}" property="dist.jar.dir"/> 464 <mkdir dir="${dist.jar.dir}"/> 465 </target> 466 <target name="-pre-jar"> 467 <!-- Empty placeholder for easier customization. --> 468 <!-- You can override this target in the ../build.xml file. --> 469 </target> 470 <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available-mkdist.available"> 471 <j2seproject1:jar/> 472 </target> 473 <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class-mkdist.available"> 474 <j2seproject1:jar manifest="${manifest.file}"/> 475 </target> 476 <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available"> 477 <j2seproject1:jar manifest="${manifest.file}"> 478 <j2seproject1:manifest> 479 <j2seproject1:attribute name="Main-Class" value="${main.class}"/> 480 </j2seproject1:manifest> 481 </j2seproject1:jar> 482 <echo>To run this application from the command line without Ant, try:</echo> 483 <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> 484 <property location="${dist.jar}" name="dist.jar.resolved"/> 485 <pathconvert property="run.classpath.with.dist.jar"> 486 <path path="${run.classpath}"/> 487 <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> 488 </pathconvert> 489 <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo> 490 </target> 491 <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries"> 492 <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> 493 <pathconvert property="run.classpath.without.build.classes.dir"> 494 <path path="${run.classpath}"/> 495 <map from="${build.classes.dir.resolved}" to=""/> 496 </pathconvert> 497 <pathconvert pathsep=" " property="jar.classpath"> 498 <path path="${run.classpath.without.build.classes.dir}"/> 499 <chainedmapper> 500 <flattenmapper/> 501 <globmapper from="*" to="lib/*"/> 502 </chainedmapper> 503 </pathconvert> 504 <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> 505 <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> 506 <fileset dir="${build.classes.dir}"/> 507 <manifest> 508 <attribute name="Main-Class" value="${main.class}"/> 509 <attribute name="Class-Path" value="${jar.classpath}"/> 510 </manifest> 511 </copylibs> 512 <echo>To run this application from the command line without Ant, try:</echo> 513 <property location="${dist.jar}" name="dist.jar.resolved"/> 514 <echo>java -jar "${dist.jar.resolved}"</echo> 515 </target> 516 <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+mkdist.available" name="-do-jar-with-libraries-without-mainclass" unless="main.class.available"> 517 <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> 518 <pathconvert property="run.classpath.without.build.classes.dir"> 519 <path path="${run.classpath}"/> 520 <map from="${build.classes.dir.resolved}" to=""/> 521 </pathconvert> 522 <pathconvert pathsep=" " property="jar.classpath"> 523 <path path="${run.classpath.without.build.classes.dir}"/> 524 <chainedmapper> 525 <flattenmapper/> 526 <globmapper from="*" to="lib/*"/> 527 </chainedmapper> 528 </pathconvert> 529 <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> 530 <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> 531 <fileset dir="${build.classes.dir}"/> 532 <manifest> 533 <attribute name="Class-Path" value="${jar.classpath}"/> 534 </manifest> 535 </copylibs> 536 </target> 537 <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.mkdist" name="-do-jar-with-libraries-without-manifest" unless="manifest.available"> 538 <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> 539 <pathconvert property="run.classpath.without.build.classes.dir"> 540 <path path="${run.classpath}"/> 541 <map from="${build.classes.dir.resolved}" to=""/> 542 </pathconvert> 543 <pathconvert pathsep=" " property="jar.classpath"> 544 <path path="${run.classpath.without.build.classes.dir}"/> 545 <chainedmapper> 546 <flattenmapper/> 547 <globmapper from="*" to="lib/*"/> 548 </chainedmapper> 549 </pathconvert> 550 <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> 551 <copylibs compress="${jar.compress}" jarfile="${dist.jar}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> 552 <fileset dir="${build.classes.dir}"/> 553 <manifest> 554 <attribute name="Class-Path" value="${jar.classpath}"/> 555 </manifest> 556 </copylibs> 557 </target> 558 <target name="-post-jar"> 559 <!-- Empty placeholder for easier customization. --> 560 <!-- You can override this target in the ../build.xml file. --> 561 </target> 562 <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-do-jar-with-libraries-without-mainclass,-do-jar-with-libraries-without-manifest,-post-jar" description="Build JAR." name="jar"/> 563 <!-- 564 ================= 565 EXECUTION SECTION 566 ================= 567 --> 568 <target depends="init,compile" description="Run a main class." name="run"> 569 <j2seproject1:java> 570 <customize> 571 <arg line="${application.args}"/> 572 </customize> 573 </j2seproject1:java> 574 </target> 575 <target name="-do-not-recompile"> 576 <property name="javac.includes.binary" value=""/> 577 </target> 578 <target depends="init,compile-single" name="run-single"> 579 <fail unless="run.class">Must select one file in the IDE or set run.class</fail> 580 <j2seproject1:java classname="${run.class}"/> 581 </target> 582 <target depends="init,compile-test-single" name="run-test-with-main"> 583 <fail unless="run.class">Must select one file in the IDE or set run.class</fail> 584 <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/> 585 </target> 586 <!-- 587 ================= 588 DEBUGGING SECTION 589 ================= 590 --> 591 <target depends="init" if="netbeans.home" name="-debug-start-debugger"> 592 <j2seproject1:nbjpdastart name="${debug.class}"/> 593 </target> 594 <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test"> 595 <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/> 596 </target> 597 <target depends="init,compile" name="-debug-start-debuggee"> 598 <j2seproject3:debug> 599 <customize> 600 <arg line="${application.args}"/> 601 </customize> 602 </j2seproject3:debug> 603 </target> 604 <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/> 605 <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto"> 606 <j2seproject1:nbjpdastart stopclassname="${main.class}"/> 607 </target> 608 <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/> 609 <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single"> 610 <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> 611 <j2seproject3:debug classname="${debug.class}"/> 612 </target> 613 <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/> 614 <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test"> 615 <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> 616 <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/> 617 </target> 618 <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/> 619 <target depends="init" name="-pre-debug-fix"> 620 <fail unless="fix.includes">Must set fix.includes</fail> 621 <property name="javac.includes" value="${fix.includes}.java"/> 622 </target> 623 <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix"> 624 <j2seproject1:nbjpdareload/> 625 </target> 626 <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/> 627 <!-- 628 =============== 629 JAVADOC SECTION 630 =============== 631 --> 632 <target depends="init" name="-javadoc-build"> 633 <mkdir dir="${dist.javadoc.dir}"/> 634 <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}"> 635 <classpath> 636 <path path="${javac.classpath}"/> 637 </classpath> 638 <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}"> 639 <filename name="**/*.java"/> 640 </fileset> 641 <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> 642 <include name="**/*.java"/> 643 </fileset> 644 </javadoc> 645 </target> 646 <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview"> 647 <nbbrowse file="${dist.javadoc.dir}/index.html"/> 648 </target> 649 <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/> 650 <!-- 651 ========================= 652 JUNIT COMPILATION SECTION 653 ========================= 654 --> 655 <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test"> 656 <mkdir dir="${build.test.classes.dir}"/> 657 </target> 658 <target name="-pre-compile-test"> 659 <!-- Empty placeholder for easier customization. --> 660 <!-- You can override this target in the ../build.xml file. --> 661 </target> 662 <target if="do.depend.true" name="-compile-test-depend"> 663 <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> 664 </target> 665 <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test"> 666 <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> 667 <copy todir="${build.test.classes.dir}"> 668 <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> 669 </copy> 670 </target> 671 <target name="-post-compile-test"> 672 <!-- Empty placeholder for easier customization. --> 673 <!-- You can override this target in the ../build.xml file. --> 674 </target> 675 <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/> 676 <target name="-pre-compile-test-single"> 677 <!-- Empty placeholder for easier customization. --> 678 <!-- You can override this target in the ../build.xml file. --> 679 </target> 680 <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single"> 681 <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> 682 <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/> 683 <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/> 684 <copy todir="${build.test.classes.dir}"> 685 <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> 686 </copy> 687 </target> 688 <target name="-post-compile-test-single"> 689 <!-- Empty placeholder for easier customization. --> 690 <!-- You can override this target in the ../build.xml file. --> 691 </target> 692 <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/> 693 <!-- 694 ======================= 695 JUNIT EXECUTION SECTION 696 ======================= 697 --> 698 <target depends="init" if="have.tests" name="-pre-test-run"> 699 <mkdir dir="${build.test.results.dir}"/> 700 </target> 701 <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run"> 702 <j2seproject3:junit testincludes="**/*Test.java"/> 703 </target> 704 <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run"> 705 <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> 706 </target> 707 <target depends="init" if="have.tests" name="test-report"/> 708 <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/> 709 <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/> 710 <target depends="init" if="have.tests" name="-pre-test-run-single"> 711 <mkdir dir="${build.test.results.dir}"/> 712 </target> 713 <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single"> 714 <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> 715 <j2seproject3:junit excludes="" includes="${test.includes}"/> 716 </target> 717 <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single"> 718 <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> 719 </target> 720 <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/> 721 <!-- 722 ======================= 723 JUNIT DEBUGGING SECTION 724 ======================= 725 --> 726 <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test"> 727 <fail unless="test.class">Must select one file in the IDE or set test.class</fail> 728 <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/> 729 <delete file="${test.report.file}"/> 730 <mkdir dir="${build.test.results.dir}"/> 731 <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}"> 732 <customize> 733 <syspropertyset> 734 <propertyref prefix="test-sys-prop."/> 735 <mapper from="test-sys-prop.*" to="*" type="glob"/> 736 </syspropertyset> 737 <arg value="${test.class}"/> 738 <arg value="showoutput=true"/> 739 <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/> 740 <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/> 741 </customize> 742 </j2seproject3:debug> 743 </target> 744 <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test"> 745 <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/> 746 </target> 747 <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/> 748 <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test"> 749 <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/> 750 </target> 751 <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/> 752 <!-- 753 ========================= 754 APPLET EXECUTION SECTION 755 ========================= 756 --> 757 <target depends="init,compile-single" name="run-applet"> 758 <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> 759 <j2seproject1:java classname="sun.applet.AppletViewer"> 760 <customize> 761 <arg value="${applet.url}"/> 762 </customize> 763 </j2seproject1:java> 764 </target> 765 <!-- 766 ========================= 767 APPLET DEBUGGING SECTION 768 ========================= 769 --> 770 <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet"> 771 <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> 772 <j2seproject3:debug classname="sun.applet.AppletViewer"> 773 <customize> 774 <arg value="${applet.url}"/> 775 </customize> 776 </j2seproject3:debug> 777 </target> 778 <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/> 779 <!-- 780 =============== 781 CLEANUP SECTION 782 =============== 783 --> 784 <target name="-deps-clean-init" unless="built-clean.properties"> 785 <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/> 786 <delete file="${built-clean.properties}" quiet="true"/> 787 </target> 788 <target if="already.built.clean.${basedir}" name="-warn-already-built-clean"> 789 <echo level="warn" message="Cycle detected: ConvwatchGUIProject was already built"/> 790 </target> 791 <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps"> 792 <mkdir dir="${build.dir}"/> 793 <touch file="${built-clean.properties}" verbose="false"/> 794 <property file="${built-clean.properties}" prefix="already.built.clean."/> 795 <antcall target="-warn-already-built-clean"/> 796 <propertyfile file="${built-clean.properties}"> 797 <entry key="${basedir}" value=""/> 798 </propertyfile> 799 </target> 800 <target depends="init" name="-do-clean"> 801 <delete dir="${build.dir}"/> 802 <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/> 803 </target> 804 <target name="-post-clean"> 805 <!-- Empty placeholder for easier customization. --> 806 <!-- You can override this target in the ../build.xml file. --> 807 </target> 808 <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/> 809 <target name="-check-call-dep"> 810 <property file="${call.built.properties}" prefix="already.built."/> 811 <condition property="should.call.dep"> 812 <not> 813 <isset property="already.built.${call.subproject}"/> 814 </not> 815 </condition> 816 </target> 817 <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep"> 818 <ant antfile="${call.script}" inheritall="false" target="${call.target}"> 819 <propertyset> 820 <propertyref prefix="transfer."/> 821 <mapper from="transfer.*" to="*" type="glob"/> 822 </propertyset> 823 </ant> 824 </target> 825</project> 826