1 /************************************************************** 2 * 3 * Licensed to the Apache Software Foundation (ASF) under one 4 * or more contributor license agreements. See the NOTICE file 5 * distributed with this work for additional information 6 * regarding copyright ownership. The ASF licenses this file 7 * to you under the Apache License, Version 2.0 (the 8 * "License"); you may not use this file except in compliance 9 * with the License. You may obtain a copy of the License at 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, 14 * software distributed under the License is distributed on an 15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 * KIND, either express or implied. See the License for the 17 * specific language governing permissions and limitations 18 * under the License. 19 * 20 *************************************************************/ 21 22 23 24 // MARKER(update_precomp.py): autogen include statement, do not remove 25 #include "precompiled_cui.hxx" 26 27 // include --------------------------------------------------------------- 28 #include <sfx2/app.hxx> 29 #include <sfx2/objsh.hxx> 30 #include <tools/resary.hxx> 31 #include <vcl/graph.hxx> 32 #include <sfx2/viewsh.hxx> 33 #include <svl/itemiter.hxx> 34 #include <svl/languageoptions.hxx> 35 #include <vcl/msgbox.hxx> 36 #include <unotools/configitem.hxx> 37 #include "svx/htmlmode.hxx" 38 39 #define _SVX_PAGE_CXX 40 41 #include <cuires.hrc> 42 #include "page.hrc" 43 #include "helpid.hrc" 44 #include "page.hxx" 45 #include <svx/pageitem.hxx> 46 #include <editeng/brshitem.hxx> 47 #include <editeng/boxitem.hxx> 48 #include <editeng/shaditem.hxx> 49 #include <editeng/pbinitem.hxx> 50 #include <editeng/lrspitem.hxx> 51 #include <editeng/ulspitem.hxx> 52 #include <editeng/sizeitem.hxx> 53 #include <editeng/frmdiritem.hxx> 54 #include "svx/dlgutil.hxx" 55 #include <dialmgr.hxx> 56 #include <editeng/paperinf.hxx> 57 #include <dialmgr.hxx> 58 #include <sfx2/module.hxx> 59 #include <svl/stritem.hxx> 60 #include <svx/dialogs.hrc> // for RID_SVXPAGE_PAGE 61 #include <editeng/eerdll.hxx> 62 #include <editeng/editrids.hrc> // for RID_SVXSTR_PAPERBIN..., 63 #include <svx/svxids.hrc> 64 65 // #i4219# 66 #include <svtools/optionsdrawinglayer.hxx> 67 #include <svl/slstitm.hxx> //CHINA001 68 #include <svl/aeitem.hxx> //CHINA001 69 #include <sfx2/request.hxx> //CHINA001 70 // configuration helper ======================================================= 71 72 /** Helper to get a configuration setting. 73 @descr This is a HACK to get a configuration item directly. Normally the 74 OfaHtmlOptions class from 'offmgr' project would do the job, but we cannot 75 use it here. On the other hand, the OfaHtmlOptions cannot be moved to 76 'svtools', because it uses 'svx' itself... 77 The correct way would be to move OfaHtmlOptions to 'svtools' anyway, and to 78 remove the dependency from 'svx' (a call to the static function 79 SvxTextEncodingBox::GetBestMimeEncoding(), which contains low level 80 operations that can be moved to lower projects, i.e. 'rtl'). Then this 81 class can be removed, and the OfaHtmlOptions can be used instead. */ 82 class SvxHtmlExportModeConfigItem_Impl : public utl::ConfigItem 83 { 84 public: 85 explicit SvxHtmlExportModeConfigItem_Impl(); 86 87 /** Returns the HTML export mode, as read from the configuration. */ 88 inline sal_Int32 GetExportMode() const { return mnExpMode; } 89 90 /** Returns true, if the current HTML export mode is set to HTML 3.2. */ 91 inline bool IsExportModeHTML32() const { return mnExpMode == 0; } // 0 == HTML_CFG_HTML32, see offmgr/htmlcfg.hxx 92 93 virtual void Commit(); 94 virtual void Notify( const com::sun::star::uno::Sequence< rtl::OUString >& _rPropertyNames); 95 96 private: 97 sal_Int32 mnExpMode; 98 }; 99 100 SvxHtmlExportModeConfigItem_Impl::SvxHtmlExportModeConfigItem_Impl() : 101 utl::ConfigItem( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Office.Common/Filter/HTML/Export" ) ) ), 102 mnExpMode( 3 ) // default to 3 == HTML_CFG_NS40, see offmgr/htmlcfg.hxx 103 { 104 using com::sun::star::uno::Sequence; 105 using com::sun::star::uno::Any; 106 107 Sequence< rtl::OUString > aPropNames( 1 ); 108 aPropNames[ 0 ] = rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Browser" ) ); 109 Sequence< Any > aPropValues( GetProperties( aPropNames ) ); 110 if( aPropValues.getLength() == 1 ) 111 aPropValues[ 0 ] >>= mnExpMode; 112 } 113 114 void SvxHtmlExportModeConfigItem_Impl::Commit() 115 { 116 } 117 118 void SvxHtmlExportModeConfigItem_Impl::Notify( const com::sun::star::uno::Sequence< rtl::OUString >& ) 119 { 120 } 121 122 // static ---------------------------------------------------------------- 123 124 static const long MINBODY = 284; // 0,5cm in twips aufgerundet 125 //static const long PRINT_OFFSET = 17; // 0,03cm in twips abgerundet 126 static const long PRINT_OFFSET = 0; // why was this ever set to 17 ? it led to wrong right and bottom margins. 127 128 static sal_uInt16 pRanges[] = 129 { 130 SID_ATTR_BORDER_OUTER, 131 SID_ATTR_BORDER_SHADOW, 132 SID_ATTR_LRSPACE, 133 SID_ATTR_PAGE_SHARED, 134 SID_SWREGISTER_COLLECTION, 135 SID_SWREGISTER_MODE, 136 0 137 }; 138 139 // ------- Mapping Seitenlayout ------------------------------------------ 140 141 sal_uInt16 aArr[] = 142 { 143 SVX_PAGE_ALL, 144 SVX_PAGE_MIRROR, 145 SVX_PAGE_RIGHT, 146 SVX_PAGE_LEFT 147 }; 148 149 // ----------------------------------------------------------------------- 150 151 sal_uInt16 PageUsageToPos_Impl( sal_uInt16 nUsage ) 152 { 153 const sal_uInt16 nCount = sizeof(aArr) / sizeof(sal_uInt16); 154 155 for ( sal_uInt16 i = 0; i < nCount; ++i ) 156 if ( aArr[i] == ( nUsage & 0x000f ) ) 157 return i; 158 return SVX_PAGE_ALL; 159 } 160 161 // ----------------------------------------------------------------------- 162 163 sal_uInt16 PosToPageUsage_Impl( sal_uInt16 nPos ) 164 { 165 const sal_uInt16 nCount = sizeof(aArr) / sizeof(sal_uInt16); 166 167 if ( nPos >= nCount ) 168 return 0; 169 return aArr[nPos]; 170 } 171 172 // ----------------------------------------------------------------------- 173 174 Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox ) 175 { 176 Size aSz; 177 aSz.Height() = rShadow.CalcShadowSpace( SHADOW_BOTTOM ) + rBox.CalcLineSpace( BOX_LINE_BOTTOM ); 178 aSz.Height() += rShadow.CalcShadowSpace( SHADOW_TOP ) + rBox.CalcLineSpace( BOX_LINE_TOP ); 179 aSz.Width() = rShadow.CalcShadowSpace( SHADOW_LEFT ) + rBox.CalcLineSpace( BOX_LINE_LEFT ); 180 aSz.Width() += rShadow.CalcShadowSpace( SHADOW_RIGHT ) + rBox.CalcLineSpace( BOX_LINE_RIGHT ); 181 return aSz; 182 } 183 184 // ----------------------------------------------------------------------- 185 186 long ConvertLong_Impl( const long nIn, SfxMapUnit eUnit ) 187 { 188 return OutputDevice::LogicToLogic( nIn, (MapUnit)eUnit, MAP_TWIP ); 189 } 190 191 sal_Bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize ) 192 { 193 if ( pSize ) 194 { 195 Size aSize = pSize->GetSize(); 196 long nDiffW = Abs( rSize.Width () - aSize.Width () ); 197 long nDiffH = Abs( rSize.Height() - aSize.Height() ); 198 return ( nDiffW < 10 && nDiffH < 10 ); 199 } 200 else 201 return sal_False; 202 } 203 204 // ----------------------------------------------------------------------- 205 206 #define MARGIN_LEFT ( (MarginPosition)0x0001 ) 207 #define MARGIN_RIGHT ( (MarginPosition)0x0002 ) 208 #define MARGIN_TOP ( (MarginPosition)0x0004 ) 209 #define MARGIN_BOTTOM ( (MarginPosition)0x0008 ) 210 211 struct SvxPage_Impl 212 { 213 MarginPosition m_nPos; 214 Printer* mpDefPrinter; 215 bool mbDelPrinter; 216 217 SvxPage_Impl() : 218 m_nPos( 0 ), 219 mpDefPrinter( 0 ), 220 mbDelPrinter( false ) {} 221 222 ~SvxPage_Impl() { if ( mbDelPrinter ) delete mpDefPrinter; } 223 }; 224 225 // class SvxPageDescPage -------------------------------------------------- 226 227 // gibt den Bereich der Which-Werte zur"uck 228 229 sal_uInt16* SvxPageDescPage::GetRanges() 230 { 231 return pRanges; 232 } 233 234 // ----------------------------------------------------------------------- 235 236 SfxTabPage* SvxPageDescPage::Create( Window* pParent, const SfxItemSet& rSet ) 237 { 238 return new SvxPageDescPage( pParent, rSet ); 239 } 240 241 // ----------------------------------------------------------------------- 242 243 SvxPageDescPage::SvxPageDescPage( Window* pParent, const SfxItemSet& rAttr ) : 244 245 SfxTabPage( pParent, CUI_RES( RID_SVXPAGE_PAGE ), rAttr ), 246 247 aPaperSizeFl ( this, CUI_RES( FL_PAPER_SIZE ) ), 248 aPaperFormatText ( this, CUI_RES( FT_PAPER_FORMAT ) ), 249 aPaperSizeBox ( this, CUI_RES( LB_PAPER_SIZE ) ), 250 aPaperWidthText ( this, CUI_RES( FT_PAPER_WIDTH ) ), 251 aPaperWidthEdit ( this, CUI_RES( ED_PAPER_WIDTH ) ), 252 aPaperHeightText ( this, CUI_RES( FT_PAPER_HEIGHT ) ), 253 aPaperHeightEdit ( this, CUI_RES( ED_PAPER_HEIGHT ) ), 254 aOrientationFT ( this, CUI_RES( FT_ORIENTATION ) ), 255 aPortraitBtn ( this, CUI_RES( RB_PORTRAIT ) ), 256 aLandscapeBtn ( this, CUI_RES( RB_LANDSCAPE ) ), 257 aBspWin ( this, CUI_RES( WN_BSP ) ), 258 aTextFlowLbl ( this, CUI_RES( FT_TEXT_FLOW ) ), 259 aTextFlowBox ( this, CUI_RES( LB_TEXT_FLOW ) ), 260 aPaperTrayLbl ( this, CUI_RES( FT_PAPER_TRAY ) ), 261 aPaperTrayBox ( this, CUI_RES( LB_PAPER_TRAY ) ), 262 aMarginFl ( this, CUI_RES( FL_MARGIN ) ), 263 aLeftMarginLbl ( this, CUI_RES( FT_LEFT_MARGIN ) ), 264 aLeftMarginEdit ( this, CUI_RES( ED_LEFT_MARGIN ) ), 265 aRightMarginLbl ( this, CUI_RES( FT_RIGHT_MARGIN ) ), 266 aRightMarginEdit ( this, CUI_RES( ED_RIGHT_MARGIN ) ), 267 aTopMarginLbl ( this, CUI_RES( FT_TOP_MARGIN ) ), 268 aTopMarginEdit ( this, CUI_RES( ED_TOP_MARGIN ) ), 269 aBottomMarginLbl ( this, CUI_RES( FT_BOTTOM_MARGIN ) ), 270 aBottomMarginEdit ( this, CUI_RES( ED_BOTTOM_MARGIN ) ), 271 aBottomSeparatorFl ( this, CUI_RES( FL_BOTTOM_SEP ) ), 272 aLayoutFL ( this, CUI_RES( FL_LAYOUT ) ), 273 aPageText ( this, CUI_RES( FT_PAGELAYOUT ) ), 274 aLayoutBox ( this, CUI_RES( LB_LAYOUT ) ), 275 aNumberFormatText ( this, CUI_RES( FT_NUMBER_FORMAT ) ), 276 aNumberFormatBox ( this, CUI_RES( LB_NUMBER_FORMAT ) ), 277 aTblAlignFT ( this, CUI_RES( FT_TBL_ALIGN ) ), 278 aHorzBox ( this, CUI_RES( CB_HORZ ) ), 279 aVertBox ( this, CUI_RES( CB_VERT ) ), 280 aAdaptBox ( this, CUI_RES( CB_ADAPT ) ), 281 aRegisterCB ( this, CUI_RES( CB_REGISTER ) ), 282 aRegisterFT ( this, CUI_RES( FT_REGISTER ) ), 283 aRegisterLB ( this, CUI_RES( LB_REGISTER ) ), 284 285 aInsideText ( CUI_RES( STR_INSIDE ) ), 286 aOutsideText ( CUI_RES( STR_OUTSIDE ) ), 287 aPrintRangeQueryText( CUI_RES( STR_QUERY_PRINTRANGE ) ), 288 289 bLandscape ( sal_False ), 290 eMode ( SVX_PAGE_MODE_STANDARD ), 291 ePaperStart ( PAPER_A3 ), 292 ePaperEnd ( PAPER_ENV_DL ), 293 pImpl ( new SvxPage_Impl ) 294 295 { 296 bBorderModified = sal_False; 297 FreeResource(); 298 aBspWin.EnableRTL( sal_False ); 299 300 // diese Page braucht ExchangeSupport 301 SetExchangeSupport(); 302 303 SvtLanguageOptions aLangOptions; 304 sal_Bool bCJK = aLangOptions.IsAsianTypographyEnabled(); 305 sal_Bool bCTL = aLangOptions.IsCTLFontEnabled(); 306 sal_Bool bWeb = sal_False; 307 const SfxPoolItem* pItem; 308 309 SfxObjectShell* pShell; 310 if(SFX_ITEM_SET == rAttr.GetItemState(SID_HTML_MODE, sal_False, &pItem) || 311 ( 0 != (pShell = SfxObjectShell::Current()) && 312 0 != (pItem = pShell->GetItem(SID_HTML_MODE)))) 313 bWeb = 0 != (((const SfxUInt16Item*)pItem)->GetValue() & HTMLMODE_ON); 314 315 // #109989# get the HTML export setting from configuration. 316 // !! This is a hack, see comments in SvxHtmlExportModeConfigItem_Impl class above. 317 bool bHTML32 = SvxHtmlExportModeConfigItem_Impl().IsExportModeHTML32(); 318 319 // fill text flow listbox with valid entries 320 aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_LTR_HORI ), FRMDIR_HORI_LEFT_TOP ); 321 if( bCTL ) 322 aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_RTL_HORI ), FRMDIR_HORI_RIGHT_TOP ); 323 // #109989# do not show vertical directions in Writer/Web 324 if( !bWeb ) 325 { 326 if( bCJK ) 327 { 328 aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_RTL_VERT ), FRMDIR_VERT_TOP_RIGHT ); 329 // aTextFlowBox.InsertEntryValue( CUI_RESSTR( RID_SVXSTR_PAGEDIR_LTR_VERT ), FRMDIR_VERT_TOP_LEFT ); 330 } 331 } 332 333 // #109989# show the text direction box in Writer/Web too, but only, if HTML export mode is not HTML3.2. 334 if( !(bWeb && bHTML32) && (bCJK || bCTL) && 335 SFX_ITEM_UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION ))) 336 { 337 aTextFlowLbl.Show(); 338 aTextFlowBox.Show(); 339 aTextFlowBox.SetSelectHdl(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl )); 340 341 aBspWin.EnableFrameDirection(sal_True); 342 } 343 Init_Impl(); 344 345 FieldUnit eFUnit = GetModuleFieldUnit( rAttr ); 346 SetFieldUnit( aLeftMarginEdit, eFUnit ); 347 SetFieldUnit( aRightMarginEdit, eFUnit ); 348 SetFieldUnit( aTopMarginEdit, eFUnit ); 349 SetFieldUnit( aBottomMarginEdit, eFUnit ); 350 SetFieldUnit( aPaperWidthEdit, eFUnit ); 351 SetFieldUnit( aPaperHeightEdit, eFUnit ); 352 353 if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() ) 354 pImpl->mpDefPrinter = (Printer*)SfxViewShell::Current()->GetPrinter(); 355 else 356 { 357 pImpl->mpDefPrinter = new Printer; 358 pImpl->mbDelPrinter = true; 359 } 360 361 MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode(); 362 pImpl->mpDefPrinter->SetMapMode( MAP_TWIP ); 363 364 // First- und Last-Werte f"ur die R"ander setzen 365 Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize(); 366 Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize(); 367 /* 368 * einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren, 369 * sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des 370 * Koordinatensystems verschoben ist. 371 */ 372 Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() - 373 pImpl->mpDefPrinter->PixelToLogic( Point() ); 374 pImpl->mpDefPrinter->SetMapMode( aOldMode ); 375 376 long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET; 377 aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( aPrintOffset.X() ), FUNIT_TWIP ); 378 nFirstLeftMargin = static_cast<long>(aLeftMarginEdit.GetFirst()); 379 aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize( 380 aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset ), FUNIT_TWIP); 381 nFirstRightMargin = static_cast<long>(aRightMarginEdit.GetFirst()); 382 aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( aPrintOffset.Y() ), FUNIT_TWIP ); 383 nFirstTopMargin = static_cast<long>(aTopMarginEdit.GetFirst()); 384 aBottomMarginEdit.SetFirst( aBottomMarginEdit.Normalize( 385 aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset ), FUNIT_TWIP ); 386 nFirstBottomMargin = static_cast<long>(aBottomMarginEdit.GetFirst()); 387 aLeftMarginEdit.SetLast( aLeftMarginEdit.Normalize( 388 aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP ); 389 nLastLeftMargin = static_cast<long>(aLeftMarginEdit.GetLast()); 390 aRightMarginEdit.SetLast( aRightMarginEdit.Normalize( 391 aPrintOffset.X() + aPrintSize.Width() ), FUNIT_TWIP ); 392 nLastRightMargin = static_cast<long>(aRightMarginEdit.GetLast()); 393 aTopMarginEdit.SetLast( aTopMarginEdit.Normalize( 394 aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP ); 395 nLastTopMargin = static_cast<long>(aTopMarginEdit.GetLast()); 396 aBottomMarginEdit.SetLast( aBottomMarginEdit.Normalize( 397 aPrintOffset.Y() + aPrintSize.Height() ), FUNIT_TWIP ); 398 nLastBottomMargin = static_cast<long>(aBottomMarginEdit.GetLast()); 399 400 // #i4219# get DrawingLayer options 401 const SvtOptionsDrawinglayer aDrawinglayerOpt; 402 403 // #i4219# take Maximum now from configuration (1/100th cm) 404 // was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000 405 aPaperWidthEdit.SetMax(aPaperWidthEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FUNIT_CM); 406 aPaperWidthEdit.SetLast(aPaperWidthEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FUNIT_CM); 407 aPaperHeightEdit.SetMax(aPaperHeightEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FUNIT_CM); 408 aPaperHeightEdit.SetLast(aPaperHeightEdit.Normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FUNIT_CM); 409 410 // #i4219# also for margins (1/100th cm). Was: 9999, keeping. 411 aLeftMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperLeftMargin()); 412 aLeftMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperLeftMargin()); 413 aRightMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperRightMargin()); 414 aRightMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperRightMargin()); 415 aTopMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperTopMargin()); 416 aTopMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperTopMargin()); 417 aBottomMarginEdit.SetMax(aDrawinglayerOpt.GetMaximumPaperBottomMargin()); 418 aBottomMarginEdit.SetLast(aDrawinglayerOpt.GetMaximumPaperBottomMargin()); 419 420 aPortraitBtn.SetAccessibleRelationMemberOf(&aOrientationFT); 421 aLandscapeBtn.SetAccessibleRelationMemberOf(&aOrientationFT); 422 } 423 424 // ----------------------------------------------------------------------- 425 426 SvxPageDescPage::~SvxPageDescPage() 427 { 428 delete pImpl; 429 } 430 431 // ----------------------------------------------------------------------- 432 433 void SvxPageDescPage::Init_Impl() 434 { 435 aLeftText = aLeftMarginLbl.GetText(); 436 aRightText = aRightMarginLbl.GetText(); 437 438 // Handler einstellen 439 aLayoutBox.SetSelectHdl( LINK( this, SvxPageDescPage, LayoutHdl_Impl ) ); 440 aPaperSizeBox.SetDropDownLineCount(10); 441 442 aPaperTrayBox.SetGetFocusHdl( 443 LINK( this, SvxPageDescPage, PaperBinHdl_Impl ) ); 444 aPaperSizeBox.SetSelectHdl( 445 LINK( this, SvxPageDescPage, PaperSizeSelect_Impl ) ); 446 aPaperWidthEdit.SetModifyHdl( 447 LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) ); 448 aPaperHeightEdit.SetModifyHdl( 449 LINK( this, SvxPageDescPage, PaperSizeModify_Impl ) ); 450 aLandscapeBtn.SetClickHdl( 451 LINK( this, SvxPageDescPage, SwapOrientation_Impl ) ); 452 aPortraitBtn.SetClickHdl( 453 LINK( this, SvxPageDescPage, SwapOrientation_Impl ) ); 454 455 Link aLink = LINK( this, SvxPageDescPage, BorderModify_Impl ); 456 aLeftMarginEdit.SetModifyHdl( aLink ); 457 aRightMarginEdit.SetModifyHdl( aLink ); 458 aTopMarginEdit.SetModifyHdl( aLink ); 459 aBottomMarginEdit.SetModifyHdl( aLink ); 460 461 aLink = LINK( this, SvxPageDescPage, RangeHdl_Impl ); 462 aPaperWidthEdit.SetLoseFocusHdl( aLink ); 463 aPaperHeightEdit.SetLoseFocusHdl( aLink ); 464 aLeftMarginEdit.SetLoseFocusHdl( aLink ); 465 aRightMarginEdit.SetLoseFocusHdl( aLink ); 466 aTopMarginEdit.SetLoseFocusHdl( aLink ); 467 aBottomMarginEdit.SetLoseFocusHdl( aLink ); 468 469 aHorzBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) ); 470 aVertBox.SetClickHdl( LINK( this, SvxPageDescPage, CenterHdl_Impl ) ); 471 472 } 473 474 // ----------------------------------------------------------------------- 475 476 void SvxPageDescPage::Reset( const SfxItemSet& rSet ) 477 { 478 SfxItemPool* pPool = rSet.GetPool(); 479 DBG_ASSERT( pPool, "Wo ist der Pool" ); 480 SfxMapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) ); 481 482 // R"ander (Links/Rechts) einstellen 483 const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_LRSPACE ); 484 485 if ( pItem ) 486 { 487 const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)*pItem; 488 SetMetricValue( aLeftMarginEdit, rLRSpace.GetLeft(), eUnit ); 489 aBspWin.SetLeft( 490 (sal_uInt16)ConvertLong_Impl( (long)rLRSpace.GetLeft(), eUnit ) ); 491 SetMetricValue( aRightMarginEdit, rLRSpace.GetRight(), eUnit ); 492 aBspWin.SetRight( 493 (sal_uInt16)ConvertLong_Impl( (long)rLRSpace.GetRight(), eUnit ) ); 494 } 495 496 // R"ander (Oben/Unten) einstellen 497 pItem = GetItem( rSet, SID_ATTR_ULSPACE ); 498 499 if ( pItem ) 500 { 501 const SvxULSpaceItem& rULSpace = (const SvxULSpaceItem&)*pItem; 502 SetMetricValue( aTopMarginEdit, rULSpace.GetUpper(), eUnit ); 503 aBspWin.SetTop( 504 (sal_uInt16)ConvertLong_Impl( (long)rULSpace.GetUpper(), eUnit ) ); 505 SetMetricValue( aBottomMarginEdit, rULSpace.GetLower(), eUnit ); 506 aBspWin.SetBottom( 507 (sal_uInt16)ConvertLong_Impl( (long)rULSpace.GetLower(), eUnit ) ); 508 } 509 510 // allgemeine Seitendaten 511 SvxNumType eNumType = SVX_ARABIC; 512 bLandscape = ( pImpl->mpDefPrinter->GetOrientation() == ORIENTATION_LANDSCAPE ); 513 sal_uInt16 nUse = (sal_uInt16)SVX_PAGE_ALL; 514 pItem = GetItem( rSet, SID_ATTR_PAGE ); 515 516 if ( pItem ) 517 { 518 const SvxPageItem& rItem = (const SvxPageItem&)*pItem; 519 eNumType = rItem.GetNumType(); 520 nUse = rItem.GetPageUsage(); 521 bLandscape = rItem.IsLandscape(); 522 } 523 524 // Ausrichtung 525 aLayoutBox.SelectEntryPos( ::PageUsageToPos_Impl( nUse ) ); 526 aBspWin.SetUsage( nUse ); 527 LayoutHdl_Impl( 0 ); 528 529 // Numerierungsart der Seitenvorlage einstellen 530 aNumberFormatBox.SelectEntryPos( sal::static_int_cast< sal_uInt16 >(eNumType) ); 531 532 // Aktueller Papierschacht 533 aPaperTrayBox.Clear(); 534 sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS; 535 pItem = GetItem( rSet, SID_ATTR_PAGE_PAPERBIN ); 536 537 if ( pItem ) 538 { 539 nPaperBin = ( (const SvxPaperBinItem*)pItem )->GetValue(); 540 541 if ( nPaperBin >= pImpl->mpDefPrinter->GetPaperBinCount() ) 542 nPaperBin = PAPERBIN_PRINTER_SETTINGS; 543 } 544 545 String aBinName; 546 547 if ( PAPERBIN_PRINTER_SETTINGS == nPaperBin ) 548 aBinName = EE_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS ); 549 else 550 aBinName = pImpl->mpDefPrinter->GetPaperBinName( (sal_uInt16)nPaperBin ); 551 552 sal_uInt16 nEntryPos = aPaperTrayBox.InsertEntry( aBinName ); 553 aPaperTrayBox.SetEntryData( nEntryPos, (void*)(sal_uLong)nPaperBin ); 554 aPaperTrayBox.SelectEntry( aBinName ); 555 556 // Size rausholen 557 Size aPaperSize = SvxPaperInfo::GetPaperSize( pImpl->mpDefPrinter ); 558 pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE ); 559 560 if ( pItem ) 561 aPaperSize = ( (const SvxSizeItem*)pItem )->GetSize(); 562 563 FASTBOOL bOrientationSupport = 564 pImpl->mpDefPrinter->HasSupport( SUPPORT_SET_ORIENTATION ); 565 #ifdef OS2 566 // unter OS/2 wird bei HasSupport() immer sal_True returned 567 // aber nur als Dummy, deshalb FALSE 568 bOrientationSupport = sal_False; 569 #endif 570 571 if ( !bOrientationSupport && 572 aPaperSize.Width() > aPaperSize.Height() ) 573 bLandscape = sal_True; 574 575 aLandscapeBtn.Check( bLandscape ); 576 aPortraitBtn.Check( !bLandscape ); 577 578 aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ), 579 ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) ); 580 581 aPaperSize = OutputDevice::LogicToLogic(aPaperSize, (MapUnit)eUnit, MAP_100TH_MM); 582 if ( bLandscape ) 583 Swap( aPaperSize ); 584 585 // Actual Paper Format 586 Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MAP_100TH_MM, sal_True ); 587 588 if ( PAPER_USER != ePaper ) 589 aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MAP_100TH_MM ); 590 591 if ( bLandscape ) 592 Swap( aPaperSize ); 593 594 // Werte in die Edits eintragen 595 SetMetricValue( aPaperHeightEdit, aPaperSize.Height(), SFX_MAPUNIT_100TH_MM ); 596 SetMetricValue( aPaperWidthEdit, aPaperSize.Width(), SFX_MAPUNIT_100TH_MM ); 597 aPaperSizeBox.Clear(); 598 599 sal_uInt16 nActPos = LISTBOX_ENTRY_NOTFOUND; 600 sal_uInt16 nAryId = RID_SVXSTRARY_PAPERSIZE_STD; 601 602 if ( ePaperStart != PAPER_A3 ) 603 nAryId = RID_SVXSTRARY_PAPERSIZE_DRAW; 604 ResStringArray aPaperAry( CUI_RES( nAryId ) ); 605 sal_uInt32 nCnt = aPaperAry.Count(); 606 607 sal_uInt16 nUserPos = LISTBOX_ENTRY_NOTFOUND; 608 for ( sal_uInt32 i = 0; i < nCnt; ++i ) 609 { 610 String aStr = aPaperAry.GetString(i); 611 Paper eSize = (Paper)aPaperAry.GetValue(i); 612 sal_uInt16 nPos = aPaperSizeBox.InsertEntry( aStr ); 613 aPaperSizeBox.SetEntryData( nPos, (void*)(sal_uLong)eSize ); 614 615 if ( eSize == ePaper ) 616 nActPos = nPos; 617 if( eSize == PAPER_USER ) 618 nUserPos = nPos; 619 } 620 // preselect current paper format - #115915#: ePaper might not be in aPaperSizeBox so use PAPER_USER instead 621 aPaperSizeBox.SelectEntryPos( nActPos != LISTBOX_ENTRY_NOTFOUND ? nActPos : nUserPos ); 622 623 // Applikationsspezifisch 624 625 switch ( eMode ) 626 { 627 case SVX_PAGE_MODE_CENTER: 628 { 629 aTblAlignFT.Show(); 630 aHorzBox.Show(); 631 aVertBox.Show(); 632 DisableVerticalPageDir(); 633 634 // Horizontale Ausrichtung 635 pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 ); 636 aHorzBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue() 637 : sal_False ); 638 639 // Vertikale Ausrichtung 640 pItem = GetItem( rSet, SID_ATTR_PAGE_EXT2 ); 641 aVertBox.Check( pItem ? ( (const SfxBoolItem*)pItem )->GetValue() 642 : sal_False ); 643 644 // Beispiel-Fenster auf Tabelle setzen 645 aBspWin.SetTable( sal_True ); 646 aBspWin.SetHorz( aHorzBox.IsChecked() ); 647 aBspWin.SetVert( aVertBox.IsChecked() ); 648 649 break; 650 } 651 652 case SVX_PAGE_MODE_PRESENTATION: 653 { 654 DisableVerticalPageDir(); 655 aAdaptBox.Show(); 656 pItem = GetItem( rSet, SID_ATTR_PAGE_EXT1 ); 657 aAdaptBox.Check( pItem ? 658 ( (const SfxBoolItem*)pItem )->GetValue() : sal_False ); 659 660 //!!! hidden, weil von StarDraw nicht implementiert 661 aLayoutBox.Hide(); 662 aPageText.Hide(); 663 664 break; 665 } 666 default: ;//prevent warning 667 } 668 669 670 // im Beispiel Hintergrund und Umrandung anzeigen 671 ResetBackground_Impl( rSet ); 672 //! UpdateExample_Impl(); 673 RangeHdl_Impl( 0 ); 674 675 // Header Footer anzeigen 676 InitHeadFoot_Impl( rSet ); 677 678 // R"ander auf Hoch/Quer updaten, dann Beispiel updaten 679 bBorderModified = sal_False; 680 SwapFirstValues_Impl( sal_False ); 681 UpdateExample_Impl(); 682 683 // Alte Werte sichern 684 aLeftMarginEdit.SaveValue(); 685 aRightMarginEdit.SaveValue(); 686 aTopMarginEdit.SaveValue(); 687 aBottomMarginEdit.SaveValue(); 688 aLayoutBox.SaveValue(); 689 aNumberFormatBox.SaveValue(); 690 aPaperSizeBox.SaveValue(); 691 aPaperWidthEdit.SaveValue(); 692 aPaperHeightEdit.SaveValue(); 693 aPortraitBtn.SaveValue(); 694 aLandscapeBtn.SaveValue(); 695 aPaperTrayBox.SaveValue(); 696 aVertBox.SaveValue(); 697 aHorzBox.SaveValue(); 698 aAdaptBox.SaveValue(); 699 700 CheckMarginEdits( true ); 701 702 // Registerhaltigkeit 703 if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_MODE)) 704 { 705 aRegisterCB.Check(((const SfxBoolItem&)rSet.Get( 706 SID_SWREGISTER_MODE)).GetValue()); 707 aRegisterCB.SaveValue(); 708 RegisterModify(&aRegisterCB); 709 } 710 if(SFX_ITEM_SET == rSet.GetItemState(SID_SWREGISTER_COLLECTION)) 711 { 712 aRegisterLB.SelectEntry( 713 ((const SfxStringItem&)rSet.Get(SID_SWREGISTER_COLLECTION)).GetValue()); 714 aRegisterLB.SaveValue(); 715 } 716 717 SfxItemState eState = rSet.GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ), 718 sal_True, &pItem ); 719 if( SFX_ITEM_UNKNOWN != eState ) 720 { 721 sal_uInt32 nVal = SFX_ITEM_SET == eState 722 ? ((SvxFrameDirectionItem*)pItem)->GetValue() 723 : 0; 724 aTextFlowBox.SelectEntryValue( static_cast< SvxFrameDirection >( nVal ) ); 725 aTextFlowBox.SaveValue(); 726 aBspWin.SetFrameDirection(nVal); 727 } 728 } 729 730 // ----------------------------------------------------------------------- 731 732 void SvxPageDescPage::FillUserData() 733 { 734 if ( SVX_PAGE_MODE_PRESENTATION == eMode ) 735 SetUserData( UniString::CreateFromInt32( (sal_Int32)aAdaptBox.IsChecked() ) ); 736 } 737 738 // ----------------------------------------------------------------------- 739 740 sal_Bool SvxPageDescPage::FillItemSet( SfxItemSet& rSet ) 741 { 742 sal_Bool bModified = sal_False; 743 const SfxItemSet& rOldSet = GetItemSet(); 744 SfxItemPool* pPool = rOldSet.GetPool(); 745 DBG_ASSERT( pPool, "Wo ist der Pool" ); 746 sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); 747 SfxMapUnit eUnit = pPool->GetMetric( nWhich ); 748 const SfxPoolItem* pOld = 0; 749 750 // alten linken und rechten Rand kopieren 751 SvxLRSpaceItem aMargin( (const SvxLRSpaceItem&)rOldSet.Get( nWhich ) ); 752 753 // alten oberen und unteren Rand kopieren 754 nWhich = GetWhich( SID_ATTR_ULSPACE ); 755 SvxULSpaceItem aTopMargin( (const SvxULSpaceItem&)rOldSet.Get( nWhich ) ); 756 757 if ( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() ) 758 { 759 aMargin.SetLeft( (sal_uInt16)GetCoreValue( aLeftMarginEdit, eUnit ) ); 760 bModified |= sal_True; 761 } 762 763 if ( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() ) 764 { 765 aMargin.SetRight( (sal_uInt16)GetCoreValue( aRightMarginEdit, eUnit ) ); 766 bModified |= sal_True; 767 } 768 769 // Linken und rechten Rand setzen 770 if ( bModified ) 771 { 772 pOld = GetOldItem( rSet, SID_ATTR_LRSPACE ); 773 774 if ( !pOld || !( *(const SvxLRSpaceItem*)pOld == aMargin ) ) 775 rSet.Put( aMargin ); 776 else 777 bModified = sal_False; 778 } 779 780 sal_Bool bMod = sal_False; 781 782 if ( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() ) 783 { 784 aTopMargin.SetUpper( (sal_uInt16)GetCoreValue( aTopMarginEdit, eUnit ) ); 785 bMod |= sal_True; 786 } 787 788 if ( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() ) 789 { 790 aTopMargin.SetLower( (sal_uInt16)GetCoreValue( aBottomMarginEdit, eUnit ) ); 791 bMod |= sal_True; 792 } 793 794 // unteren oberen Rand setzen 795 // 796 if ( bMod ) 797 { 798 pOld = GetOldItem( rSet, SID_ATTR_ULSPACE ); 799 800 if ( !pOld || !( *(const SvxULSpaceItem*)pOld == aTopMargin ) ) 801 { 802 bModified |= sal_True; 803 rSet.Put( aTopMargin ); 804 } 805 } 806 807 // Druckerschacht 808 nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN ); 809 sal_uInt16 nPos = aPaperTrayBox.GetSelectEntryPos(); 810 sal_uInt16 nBin = (sal_uInt16)(sal_uLong)aPaperTrayBox.GetEntryData( nPos ); 811 pOld = GetOldItem( rSet, SID_ATTR_PAGE_PAPERBIN ); 812 813 if ( !pOld || ( (const SvxPaperBinItem*)pOld )->GetValue() != nBin ) 814 { 815 rSet.Put( SvxPaperBinItem( nWhich, (sal_uInt8)nBin ) ); 816 bModified |= sal_True; 817 } 818 819 nPos = aPaperSizeBox.GetSelectEntryPos(); 820 Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos ); 821 const sal_uInt16 nOld = aPaperSizeBox.GetSavedValue(); 822 sal_Bool bChecked = aLandscapeBtn.IsChecked(); 823 824 if ( PAPER_USER == ePaper ) 825 { 826 if ( nOld != nPos || 827 aPaperWidthEdit.IsValueModified() || 828 aPaperHeightEdit.IsValueModified() || 829 bChecked != aLandscapeBtn.GetSavedValue() ) 830 { 831 Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ), 832 GetCoreValue( aPaperHeightEdit, eUnit ) ); 833 pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE ); 834 835 if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize ) 836 { 837 rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); 838 bModified |= sal_True; 839 } 840 } 841 } 842 else 843 { 844 if ( nOld != nPos || bChecked != aLandscapeBtn.GetSavedValue() ) 845 { 846 Size aSize( SvxPaperInfo::GetPaperSize( ePaper, (MapUnit)eUnit ) ); 847 848 if ( bChecked ) 849 Swap( aSize ); 850 851 pOld = GetOldItem( rSet, SID_ATTR_PAGE_SIZE ); 852 853 if ( !pOld || ( (const SvxSizeItem*)pOld )->GetSize() != aSize ) 854 { 855 rSet.Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); 856 bModified |= sal_True; 857 } 858 } 859 } 860 861 // sonstiges Zeug der Page 862 nWhich = GetWhich( SID_ATTR_PAGE ); 863 SvxPageItem aPage( (const SvxPageItem&)rOldSet.Get( nWhich ) ); 864 bMod = aLayoutBox.GetSelectEntryPos() != aLayoutBox.GetSavedValue(); 865 866 if ( bMod ) 867 aPage.SetPageUsage( 868 ::PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) ); 869 870 if ( bChecked != aLandscapeBtn.GetSavedValue() ) 871 { 872 aPage.SetLandscape(bChecked); 873 bMod |= sal_True; 874 } 875 876 // Einstellen der Numerierungsart der Seite 877 nPos = aNumberFormatBox.GetSelectEntryPos(); 878 879 if ( nPos != aNumberFormatBox.GetSavedValue() ) 880 { 881 aPage.SetNumType( (SvxNumType)nPos ); 882 bMod |= sal_True; 883 } 884 885 if ( bMod ) 886 { 887 pOld = GetOldItem( rSet, SID_ATTR_PAGE ); 888 889 if ( !pOld || !( *(const SvxPageItem*)pOld == aPage ) ) 890 { 891 rSet.Put( aPage ); 892 bModified |= sal_True; 893 } 894 } 895 else if ( SFX_ITEM_DEFAULT == rOldSet.GetItemState( nWhich ) ) 896 rSet.ClearItem( nWhich ); 897 else 898 rSet.Put( rOldSet.Get( nWhich ) ); 899 900 // Modispezifische Controls auswerten 901 902 switch ( eMode ) 903 { 904 case SVX_PAGE_MODE_CENTER: 905 { 906 if ( aHorzBox.IsChecked() != aHorzBox.GetSavedValue() ) 907 { 908 SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ), 909 aHorzBox.IsChecked() ); 910 rSet.Put( aHorz ); 911 bModified |= sal_True; 912 } 913 914 if ( aVertBox.IsChecked() != aVertBox.GetSavedValue() ) 915 { 916 SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ), 917 aVertBox.IsChecked() ); 918 rSet.Put( aVert ); 919 bModified |= sal_True; 920 } 921 break; 922 } 923 924 case SVX_PAGE_MODE_PRESENTATION: 925 { 926 // immer putten, damit Draw das auswerten kann 927 rSet.Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ), 928 aAdaptBox.IsChecked() ) ); 929 bModified |= sal_True; 930 break; 931 } 932 default: ;//prevent warning 933 934 } 935 936 if(aRegisterCB.IsVisible() && 937 (aRegisterCB.IsChecked() || aRegisterCB.GetSavedValue() != aRegisterCB.IsChecked())) 938 { 939 const SfxBoolItem& rRegItem = (const SfxBoolItem&)rOldSet.Get(SID_SWREGISTER_MODE); 940 SfxBoolItem* pRegItem = (SfxBoolItem*)rRegItem.Clone(); 941 sal_Bool bCheck = aRegisterCB.IsChecked(); 942 pRegItem->SetValue(bCheck); 943 rSet.Put(*pRegItem); 944 bModified |= sal_True; 945 if(bCheck) 946 { 947 bModified |= sal_True; 948 rSet.Put(SfxStringItem(SID_SWREGISTER_COLLECTION, 949 aRegisterLB.GetSelectEntry())); 950 } 951 delete pRegItem; 952 } 953 954 SvxFrameDirection eDirection = aTextFlowBox.GetSelectEntryValue(); 955 if( aTextFlowBox.IsVisible() && (eDirection != aTextFlowBox.GetSavedValue()) ) 956 { 957 rSet.Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) ); 958 bModified = sal_True; 959 } 960 961 return bModified; 962 } 963 964 // ----------------------------------------------------------------------- 965 966 IMPL_LINK( SvxPageDescPage, LayoutHdl_Impl, ListBox *, EMPTYARG ) 967 { 968 // innen au\sen umschalten 969 const sal_uInt16 nPos = PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ); 970 971 if ( nPos == SVX_PAGE_MIRROR ) 972 { 973 if ( aLeftMarginLbl.GetText() != aInsideText ) 974 aLeftMarginLbl.SetText( aInsideText ); 975 976 if ( aRightMarginLbl.GetText() != aOutsideText ) 977 aRightMarginLbl.SetText( aOutsideText ); 978 } 979 else 980 { 981 if ( aLeftMarginLbl.GetText() != aLeftText ) 982 aLeftMarginLbl.SetText( aLeftText ); 983 984 if ( aRightMarginLbl.GetText() != aRightText ) 985 aRightMarginLbl.SetText( aRightText ); 986 } 987 UpdateExample_Impl( true ); 988 return 0; 989 } 990 991 // ----------------------------------------------------------------------- 992 993 IMPL_LINK( SvxPageDescPage, PaperBinHdl_Impl, ListBox *, EMPTYARG ) 994 { 995 if ( aPaperTrayBox.GetEntryCount() > 1 ) 996 // schon gef"ullt 997 return 0; 998 999 // Schacht-Box initialisieren 1000 String aOldName = aPaperTrayBox.GetSelectEntry(); 1001 aPaperTrayBox.SetUpdateMode( sal_False ); 1002 aPaperTrayBox.Clear(); 1003 sal_uInt16 nEntryPos = aPaperTrayBox.InsertEntry( 1004 EE_RESSTR( RID_SVXSTR_PAPERBIN_SETTINGS ) ); 1005 aPaperTrayBox.SetEntryData( nEntryPos, 1006 (void*)(sal_uLong)PAPERBIN_PRINTER_SETTINGS ); 1007 String aPaperBin( EditResId( RID_SVXSTR_PAPERBIN ) ); 1008 sal_uInt16 nBinCount = pImpl->mpDefPrinter->GetPaperBinCount(); 1009 1010 for ( sal_uInt16 i = 0; i < nBinCount; ++i ) 1011 { 1012 String aName = pImpl->mpDefPrinter->GetPaperBinName(i); 1013 1014 if ( !aName.Len() ) 1015 { 1016 aName = aPaperBin; 1017 aName.Append( sal_Unicode(' ') ); 1018 aName.Append( UniString::CreateFromInt32( i+1 ) ); 1019 } 1020 nEntryPos = aPaperTrayBox.InsertEntry( aName ); 1021 aPaperTrayBox.SetEntryData( nEntryPos, (void*)(sal_uLong)i ); 1022 } 1023 aPaperTrayBox.SelectEntry( aOldName ); 1024 aPaperTrayBox.SetUpdateMode( sal_True ); 1025 1026 return 0; 1027 } 1028 1029 // ----------------------------------------------------------------------- 1030 1031 IMPL_LINK( SvxPageDescPage, PaperSizeSelect_Impl, ListBox *, pBox ) 1032 { 1033 const sal_uInt16 nPos = pBox->GetSelectEntryPos(); 1034 Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos ); 1035 1036 if ( ePaper != PAPER_USER ) 1037 { 1038 Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MAP_100TH_MM ) ); 1039 1040 if ( aLandscapeBtn.IsChecked() ) 1041 Swap( aSize ); 1042 1043 if ( aSize.Height() < aPaperHeightEdit.GetMin( FUNIT_100TH_MM ) ) 1044 aPaperHeightEdit.SetMin( 1045 aPaperHeightEdit.Normalize( aSize.Height() ), FUNIT_100TH_MM ); 1046 if ( aSize.Width() < aPaperWidthEdit.GetMin( FUNIT_100TH_MM ) ) 1047 aPaperWidthEdit.SetMin( 1048 aPaperWidthEdit.Normalize( aSize.Width() ), FUNIT_100TH_MM ); 1049 SetMetricValue( aPaperHeightEdit, aSize.Height(), SFX_MAPUNIT_100TH_MM ); 1050 SetMetricValue( aPaperWidthEdit, aSize.Width(), SFX_MAPUNIT_100TH_MM ); 1051 1052 // R"ander ggf. neu berechnen 1053 CalcMargin_Impl(); 1054 1055 RangeHdl_Impl( 0 ); 1056 UpdateExample_Impl( true ); 1057 1058 if ( eMode == SVX_PAGE_MODE_PRESENTATION ) 1059 { 1060 // Draw: bei Papierformat soll der Rand 1cm betragen 1061 long nTmp = 0; 1062 sal_Bool bScreen = ( PAPER_SCREEN == ePaper ); 1063 1064 if ( !bScreen ) 1065 // bei Bildschirm keinen Rand 1066 nTmp = 1; // entspr. 1cm 1067 1068 // Abfragen, ob fuer Raender 0 gesetzt ist: 1069 if ( bScreen || aRightMarginEdit.GetValue() == 0 ) 1070 { 1071 SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_CM ); 1072 if ( !bScreen && 1073 aRightMarginEdit.GetFirst() > aRightMarginEdit.GetValue() ) 1074 aRightMarginEdit.SetValue( aRightMarginEdit.GetFirst() ); 1075 } 1076 if ( bScreen || aLeftMarginEdit.GetValue() == 0 ) 1077 { 1078 SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_CM ); 1079 if ( !bScreen && 1080 aLeftMarginEdit.GetFirst() > aLeftMarginEdit.GetValue() ) 1081 aLeftMarginEdit.SetValue( aLeftMarginEdit.GetFirst() ); 1082 } 1083 if ( bScreen || aBottomMarginEdit.GetValue() == 0 ) 1084 { 1085 SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_CM ); 1086 if ( !bScreen && 1087 aBottomMarginEdit.GetFirst() > aBottomMarginEdit.GetValue() ) 1088 aBottomMarginEdit.SetValue( aBottomMarginEdit.GetFirst() ); 1089 } 1090 if ( bScreen || aTopMarginEdit.GetValue() == 0 ) 1091 { 1092 SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_CM ); 1093 if ( !bScreen && 1094 aTopMarginEdit.GetFirst() > aTopMarginEdit.GetValue() ) 1095 aTopMarginEdit.SetValue( aTopMarginEdit.GetFirst() ); 1096 } 1097 UpdateExample_Impl( true ); 1098 } 1099 } 1100 return 0; 1101 } 1102 1103 // ----------------------------------------------------------------------- 1104 1105 IMPL_LINK( SvxPageDescPage, PaperSizeModify_Impl, Edit *, EMPTYARG ) 1106 { 1107 sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); 1108 SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich ); 1109 Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ), 1110 GetCoreValue( aPaperHeightEdit, eUnit ) ); 1111 Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, (MapUnit)eUnit, sal_True ); 1112 sal_uInt16 nEntryCount = aPaperSizeBox.GetEntryCount(); 1113 1114 for ( sal_uInt16 i = 0; i < nEntryCount; ++i ) 1115 { 1116 Paper eTmp = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData(i); 1117 1118 if ( eTmp == ePaper ) 1119 { 1120 aPaperSizeBox.SelectEntryPos(i); 1121 break; 1122 } 1123 } 1124 UpdateExample_Impl( true ); 1125 return 0; 1126 } 1127 1128 // ----------------------------------------------------------------------- 1129 1130 IMPL_LINK( SvxPageDescPage, SwapOrientation_Impl, RadioButton *, pBtn ) 1131 { 1132 if ( 1133 (!bLandscape && pBtn == &aLandscapeBtn) || 1134 (bLandscape && pBtn == &aPortraitBtn) 1135 ) 1136 { 1137 bLandscape = aLandscapeBtn.IsChecked(); 1138 1139 const long lWidth = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_100TH_MM ); 1140 const long lHeight = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_100TH_MM ); 1141 1142 // swap with and height 1143 SetMetricValue( aPaperWidthEdit, lHeight, SFX_MAPUNIT_100TH_MM ); 1144 SetMetricValue( aPaperHeightEdit, lWidth, SFX_MAPUNIT_100TH_MM ); 1145 1146 // recalculate margins if necessary 1147 CalcMargin_Impl(); 1148 1149 PaperSizeSelect_Impl( &aPaperSizeBox ); 1150 RangeHdl_Impl( 0 ); 1151 SwapFirstValues_Impl( bBorderModified ); 1152 UpdateExample_Impl( true ); 1153 } 1154 return 0; 1155 } 1156 1157 // ----------------------------------------------------------------------- 1158 1159 void SvxPageDescPage::SwapFirstValues_Impl( FASTBOOL bSet ) 1160 { 1161 MapMode aOldMode = pImpl->mpDefPrinter->GetMapMode(); 1162 Orientation eOri = ORIENTATION_PORTRAIT; 1163 1164 if ( bLandscape ) 1165 eOri = ORIENTATION_LANDSCAPE; 1166 Orientation eOldOri = pImpl->mpDefPrinter->GetOrientation(); 1167 pImpl->mpDefPrinter->SetOrientation( eOri ); 1168 pImpl->mpDefPrinter->SetMapMode( MAP_TWIP ); 1169 1170 // First- und Last-Werte f"ur die R"ander setzen 1171 Size aPaperSize = pImpl->mpDefPrinter->GetPaperSize(); 1172 Size aPrintSize = pImpl->mpDefPrinter->GetOutputSize(); 1173 /* 1174 * einen Punkt ( 0,0 ) in logische Koordinaten zu konvertieren, 1175 * sieht aus wie Unsinn; ist aber sinnvoll, wenn der Ursprung des 1176 * Koordinatensystems verschoben ist. 1177 */ 1178 Point aPrintOffset = pImpl->mpDefPrinter->GetPageOffset() - 1179 pImpl->mpDefPrinter->PixelToLogic( Point() ); 1180 pImpl->mpDefPrinter->SetMapMode( aOldMode ); 1181 pImpl->mpDefPrinter->SetOrientation( eOldOri ); 1182 1183 sal_Int64 nSetL = aLeftMarginEdit.Denormalize( 1184 aLeftMarginEdit.GetValue( FUNIT_TWIP ) ); 1185 sal_Int64 nSetR = aRightMarginEdit.Denormalize( 1186 aRightMarginEdit.GetValue( FUNIT_TWIP ) ); 1187 sal_Int64 nSetT = aTopMarginEdit.Denormalize( 1188 aTopMarginEdit.GetValue( FUNIT_TWIP ) ); 1189 sal_Int64 nSetB = aBottomMarginEdit.Denormalize( 1190 aBottomMarginEdit.GetValue( FUNIT_TWIP ) ); 1191 1192 long nOffset = !aPrintOffset.X() && !aPrintOffset.Y() ? 0 : PRINT_OFFSET; 1193 long nNewL = aPrintOffset.X(); 1194 long nNewR = 1195 aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X() + nOffset; 1196 long nNewT = aPrintOffset.Y(); 1197 long nNewB = 1198 aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y() + nOffset; 1199 1200 aLeftMarginEdit.SetFirst( aLeftMarginEdit.Normalize( nNewL ), FUNIT_TWIP ); 1201 nFirstLeftMargin = static_cast<long>(aLeftMarginEdit.GetFirst()); 1202 aRightMarginEdit.SetFirst( aRightMarginEdit.Normalize( nNewR ), FUNIT_TWIP ); 1203 nFirstRightMargin = static_cast<long>(aRightMarginEdit.GetFirst()); 1204 aTopMarginEdit.SetFirst( aTopMarginEdit.Normalize( nNewT ), FUNIT_TWIP ); 1205 nFirstTopMargin = static_cast<long>(aTopMarginEdit.GetFirst()); 1206 aBottomMarginEdit.SetFirst( aBottomMarginEdit.Normalize( nNewB ), FUNIT_TWIP ); 1207 nFirstBottomMargin = static_cast<long>(aBottomMarginEdit.GetFirst()); 1208 1209 if ( bSet ) 1210 { 1211 // ggf. auch die Werte umsetzen, 1212 if ( nSetL < nNewL ) 1213 aLeftMarginEdit.SetValue( aLeftMarginEdit.Normalize( nNewL ), 1214 FUNIT_TWIP ); 1215 if ( nSetR < nNewR ) 1216 aRightMarginEdit.SetValue( aRightMarginEdit.Normalize( nNewR ), 1217 FUNIT_TWIP ); 1218 if ( nSetT < nNewT ) 1219 aTopMarginEdit.SetValue( aTopMarginEdit.Normalize( nNewT ), 1220 FUNIT_TWIP ); 1221 if ( nSetB < nNewB ) 1222 aBottomMarginEdit.SetValue( aBottomMarginEdit.Normalize( nNewB ), 1223 FUNIT_TWIP ); 1224 } 1225 } 1226 1227 // ----------------------------------------------------------------------- 1228 1229 IMPL_LINK_INLINE_START( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG ) 1230 { 1231 if ( !bBorderModified ) 1232 bBorderModified = sal_True; 1233 UpdateExample_Impl(); 1234 return 0; 1235 } 1236 IMPL_LINK_INLINE_END( SvxPageDescPage, BorderModify_Impl, MetricField *, EMPTYARG ) 1237 1238 // ----------------------------------------------------------------------- 1239 1240 void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground ) 1241 { 1242 // Size 1243 Size aSize( GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP ), 1244 GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP ) ); 1245 1246 aBspWin.SetSize( aSize ); 1247 1248 // R"ander 1249 aBspWin.SetTop( GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP ) ); 1250 aBspWin.SetBottom( GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP ) ); 1251 aBspWin.SetLeft( GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP ) ); 1252 aBspWin.SetRight( GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP ) ); 1253 1254 // Layout 1255 aBspWin.SetUsage( PosToPageUsage_Impl( aLayoutBox.GetSelectEntryPos() ) ); 1256 if ( bResetbackground ) 1257 aBspWin.ResetBackground(); 1258 aBspWin.Invalidate(); 1259 } 1260 1261 // ----------------------------------------------------------------------- 1262 1263 void SvxPageDescPage::ResetBackground_Impl( const SfxItemSet& rSet ) 1264 { 1265 sal_uInt16 nWhich = GetWhich( SID_ATTR_PAGE_HEADERSET ); 1266 1267 if ( rSet.GetItemState( nWhich, sal_False ) == SFX_ITEM_SET ) 1268 { 1269 const SvxSetItem& rSetItem = 1270 (const SvxSetItem&)rSet.Get( nWhich, sal_False ); 1271 const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); 1272 const SfxBoolItem& rOn = 1273 (const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ); 1274 1275 if ( rOn.GetValue() ) 1276 { 1277 nWhich = GetWhich( SID_ATTR_BRUSH ); 1278 1279 if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET ) 1280 { 1281 const SvxBrushItem& rItem = 1282 (const SvxBrushItem&)rTmpSet.Get( nWhich ); 1283 aBspWin.SetHdColor( rItem.GetColor() ); 1284 } 1285 nWhich = GetWhich( SID_ATTR_BORDER_OUTER ); 1286 1287 if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET ) 1288 { 1289 const SvxBoxItem& rItem = 1290 (const SvxBoxItem&)rTmpSet.Get( nWhich ); 1291 aBspWin.SetHdBorder( rItem ); 1292 } 1293 } 1294 } 1295 1296 nWhich = GetWhich( SID_ATTR_PAGE_FOOTERSET ); 1297 1298 if ( rSet.GetItemState( nWhich, sal_False ) == SFX_ITEM_SET ) 1299 { 1300 const SvxSetItem& rSetItem = 1301 (const SvxSetItem&)rSet.Get( nWhich, sal_False ); 1302 const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); 1303 const SfxBoolItem& rOn = 1304 (const SfxBoolItem&)rTmpSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ); 1305 1306 if ( rOn.GetValue() ) 1307 { 1308 nWhich = GetWhich( SID_ATTR_BRUSH ); 1309 1310 if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET ) 1311 { 1312 const SvxBrushItem& rItem = 1313 (const SvxBrushItem&)rTmpSet.Get( nWhich ); 1314 aBspWin.SetFtColor( rItem.GetColor() ); 1315 } 1316 nWhich = GetWhich( SID_ATTR_BORDER_OUTER ); 1317 1318 if ( rTmpSet.GetItemState( nWhich ) == SFX_ITEM_SET ) 1319 { 1320 const SvxBoxItem& rItem = 1321 (const SvxBoxItem&)rTmpSet.Get( nWhich ); 1322 aBspWin.SetFtBorder( rItem ); 1323 } 1324 } 1325 } 1326 1327 const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_BRUSH ); 1328 1329 if ( pItem ) 1330 { 1331 aBspWin.SetColor( ( (const SvxBrushItem*)pItem )->GetColor() ); 1332 const Graphic* pGrf = ( (const SvxBrushItem*)pItem )->GetGraphic(); 1333 1334 if ( pGrf ) 1335 { 1336 Bitmap aBitmap = pGrf->GetBitmap(); 1337 aBspWin.SetBitmap( &aBitmap ); 1338 } 1339 else 1340 aBspWin.SetBitmap( NULL ); 1341 } 1342 1343 pItem = GetItem( rSet, SID_ATTR_BORDER_OUTER ); 1344 1345 if ( pItem ) 1346 aBspWin.SetBorder( (SvxBoxItem&)*pItem ); 1347 } 1348 1349 // ----------------------------------------------------------------------- 1350 1351 void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet ) 1352 { 1353 bLandscape = aLandscapeBtn.IsChecked(); 1354 const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE ); 1355 1356 if ( pItem ) 1357 aBspWin.SetSize( ( (const SvxSizeItem*)pItem )->GetSize() ); 1358 1359 const SvxSetItem* pSetItem = 0; 1360 1361 // Kopfzeilen-Attribute auswerten 1362 1363 if ( SFX_ITEM_SET == 1364 rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ), 1365 sal_False, (const SfxPoolItem**)&pSetItem ) ) 1366 { 1367 const SfxItemSet& rHeaderSet = pSetItem->GetItemSet(); 1368 const SfxBoolItem& rHeaderOn = 1369 (const SfxBoolItem&)rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ); 1370 1371 if ( rHeaderOn.GetValue() ) 1372 { 1373 const SvxSizeItem& rSize = (const SvxSizeItem&) 1374 rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) ); 1375 const SvxULSpaceItem& rUL = (const SvxULSpaceItem&) 1376 rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) ); 1377 long nDist = rUL.GetLower(); 1378 aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist ); 1379 aBspWin.SetHdDist( nDist ); 1380 const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&) 1381 rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) ); 1382 aBspWin.SetHdLeft( rLR.GetLeft() ); 1383 aBspWin.SetHdRight( rLR.GetRight() ); 1384 aBspWin.SetHeader( sal_True ); 1385 } 1386 else 1387 aBspWin.SetHeader( sal_False ); 1388 1389 // im Beispiel Hintergrund und Umrandung anzeigen 1390 sal_uInt16 nWhich = GetWhich( SID_ATTR_BRUSH ); 1391 1392 if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE ) 1393 { 1394 const SvxBrushItem& rItem = 1395 (const SvxBrushItem&)rHeaderSet.Get( nWhich ); 1396 aBspWin.SetHdColor( rItem.GetColor() ); 1397 } 1398 nWhich = GetWhich( SID_ATTR_BORDER_OUTER ); 1399 1400 if ( rHeaderSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE ) 1401 { 1402 const SvxBoxItem& rItem = 1403 (const SvxBoxItem&)rHeaderSet.Get( nWhich ); 1404 aBspWin.SetHdBorder( rItem ); 1405 } 1406 } 1407 1408 // Fusszeilen-Attribute auswerten 1409 1410 if ( SFX_ITEM_SET == 1411 rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ), 1412 sal_False, (const SfxPoolItem**)&pSetItem ) ) 1413 { 1414 const SfxItemSet& rFooterSet = pSetItem->GetItemSet(); 1415 const SfxBoolItem& rFooterOn = 1416 (const SfxBoolItem&)rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ); 1417 1418 if ( rFooterOn.GetValue() ) 1419 { 1420 const SvxSizeItem& rSize = (const SvxSizeItem&) 1421 rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) ); 1422 const SvxULSpaceItem& rUL = (const SvxULSpaceItem&) 1423 rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) ); 1424 long nDist = rUL.GetUpper(); 1425 aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist ); 1426 aBspWin.SetFtDist( nDist ); 1427 const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&) 1428 rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) ); 1429 aBspWin.SetFtLeft( rLR.GetLeft() ); 1430 aBspWin.SetFtRight( rLR.GetRight() ); 1431 aBspWin.SetFooter( sal_True ); 1432 } 1433 else 1434 aBspWin.SetFooter( sal_False ); 1435 1436 // im Beispiel Hintergrund und Umrandung anzeigen 1437 sal_uInt16 nWhich = GetWhich( SID_ATTR_BRUSH ); 1438 1439 if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE ) 1440 { 1441 const SvxBrushItem& rItem = 1442 (const SvxBrushItem&)rFooterSet.Get( nWhich ); 1443 aBspWin.SetFtColor( rItem.GetColor() ); 1444 } 1445 nWhich = GetWhich( SID_ATTR_BORDER_OUTER ); 1446 1447 if ( rFooterSet.GetItemState( nWhich ) >= SFX_ITEM_AVAILABLE ) 1448 { 1449 const SvxBoxItem& rItem = 1450 (const SvxBoxItem&)rFooterSet.Get( nWhich ); 1451 aBspWin.SetFtBorder( rItem ); 1452 } 1453 } 1454 } 1455 1456 // ----------------------------------------------------------------------- 1457 1458 void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet ) 1459 { 1460 InitHeadFoot_Impl( rSet ); 1461 ResetBackground_Impl( rSet ); 1462 RangeHdl_Impl( 0 ); 1463 } 1464 1465 // ----------------------------------------------------------------------- 1466 1467 int SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet ) 1468 { 1469 // Abfrage, ob die Seitenr"ander ausserhalb des Druckbereichs liegen 1470 // Wenn nicht, dann den Anwender fragen, ob sie "ubernommen werden sollen. 1471 // Wenn nicht, dann auf der TabPage bleiben. 1472 sal_uInt16 nPos = aPaperSizeBox.GetSelectEntryPos(); 1473 Paper ePaper = (Paper)(sal_uLong)aPaperSizeBox.GetEntryData( nPos ); 1474 1475 if ( ePaper != PAPER_SCREEN && IsMarginOutOfRange() ) 1476 { 1477 if ( QueryBox( this, WB_YES_NO | WB_DEF_NO, aPrintRangeQueryText ).Execute() == RET_NO ) 1478 { 1479 MetricField* pField = NULL; 1480 if ( IsPrinterRangeOverflow( aLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) ) 1481 pField = &aLeftMarginEdit; 1482 if ( IsPrinterRangeOverflow( aRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT ) 1483 && !pField ) 1484 pField = &aRightMarginEdit; 1485 if ( IsPrinterRangeOverflow( aTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP ) 1486 && !pField ) 1487 pField = &aTopMarginEdit; 1488 if ( IsPrinterRangeOverflow( aBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM ) 1489 && !pField ) 1490 pField = &aBottomMarginEdit; 1491 if ( pField ) 1492 pField->GrabFocus(); 1493 UpdateExample_Impl(); 1494 return KEEP_PAGE; 1495 } 1496 else 1497 CheckMarginEdits( false ); 1498 } 1499 1500 if ( _pSet ) 1501 { 1502 FillItemSet( *_pSet ); 1503 1504 // ggf. hoch/quer putten 1505 sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE ); 1506 SfxMapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh ); 1507 Size aSize( GetCoreValue( aPaperWidthEdit, eUnit ), 1508 GetCoreValue( aPaperHeightEdit, eUnit ) ); 1509 1510 // putten, wenn aktuelle Gr"o/se unterschiedlich zum Wert in _pSet 1511 const SvxSizeItem* pSize = (const SvxSizeItem*)GetItem( *_pSet, SID_ATTR_PAGE_SIZE ); 1512 if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) ) 1513 _pSet->Put( SvxSizeItem( nWh, aSize ) ); 1514 } 1515 1516 return LEAVE_PAGE; 1517 } 1518 1519 // ----------------------------------------------------------------------- 1520 1521 IMPL_LINK( SvxPageDescPage, RangeHdl_Impl, Edit *, EMPTYARG ) 1522 { 1523 // Aktuelle Header-Breite/H"ohe aus dem Bsp 1524 long nHHeight = aBspWin.GetHdHeight(); 1525 long nHDist = aBspWin.GetHdDist(); 1526 1527 // Aktuelle Footer-Breite/H"ohe aus dem Bsp 1528 long nFHeight = aBspWin.GetFtHeight(); 1529 long nFDist = aBspWin.GetFtDist(); 1530 1531 // Aktuelle Header/Footer-R"ander aus dem Bsp 1532 long nHFLeft = Max( aBspWin.GetHdLeft(), aBspWin.GetFtLeft() ); 1533 long nHFRight = Max( aBspWin.GetHdRight(), aBspWin.GetFtRight() ); 1534 1535 // Aktuelle Werte der Seitenr"ander 1536 long nBT = static_cast<long>(aTopMarginEdit.Denormalize(aTopMarginEdit.GetValue(FUNIT_TWIP))); 1537 long nBB = static_cast<long>(aBottomMarginEdit.Denormalize(aBottomMarginEdit.GetValue(FUNIT_TWIP))); 1538 long nBL = static_cast<long>(aLeftMarginEdit.Denormalize(aLeftMarginEdit.GetValue(FUNIT_TWIP))); 1539 long nBR = static_cast<long>(aRightMarginEdit.Denormalize(aRightMarginEdit.GetValue(FUNIT_TWIP))); 1540 1541 // Breite Umrandung der Seite berechnen 1542 const SfxItemSet* _pSet = &GetItemSet(); 1543 Size aBorder; 1544 1545 if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >= 1546 SFX_ITEM_AVAILABLE && 1547 _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER) ) >= 1548 SFX_ITEM_AVAILABLE ) 1549 { 1550 aBorder = ( GetMinBorderSpace_Impl( 1551 (const SvxShadowItem&)_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW)), 1552 (const SvxBoxItem&)_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER)))); 1553 } 1554 1555 long nH = static_cast<long>(aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP))); 1556 long nW = static_cast<long>(aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP))); 1557 1558 // Grenzen Papier 1559 // Maximum liegt bei 54cm 1560 // 1561 long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB + 1562 MINBODY + aBorder.Height(); 1563 aPaperHeightEdit.SetMin(aPaperHeightEdit.Normalize(nMin), FUNIT_TWIP); 1564 1565 nMin = MINBODY + nBL + nBR + aBorder.Width(); 1566 aPaperWidthEdit.SetMin(aPaperWidthEdit.Normalize(nMin), FUNIT_TWIP); 1567 1568 // Falls sich die Papiergr"o\se ge"adert hat 1569 nH = static_cast<long>(aPaperHeightEdit.Denormalize(aPaperHeightEdit.GetValue(FUNIT_TWIP))); 1570 nW = static_cast<long>(aPaperWidthEdit.Denormalize(aPaperWidthEdit.GetValue(FUNIT_TWIP))); 1571 1572 // Top 1573 long nMax = nH - nBB - aBorder.Height() - MINBODY - 1574 nFDist - nFHeight - nHDist - nHHeight; 1575 1576 aTopMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP); 1577 1578 // Bottom 1579 nMax = nH - nBT - aBorder.Height() - MINBODY - 1580 nFDist - nFHeight - nHDist - nHHeight; 1581 1582 aBottomMarginEdit.SetMax(aTopMarginEdit.Normalize(nMax), FUNIT_TWIP); 1583 1584 // Left 1585 nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight; 1586 aLeftMarginEdit.SetMax(aLeftMarginEdit.Normalize(nMax), FUNIT_TWIP); 1587 1588 // Right 1589 nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight; 1590 aRightMarginEdit.SetMax(aRightMarginEdit.Normalize(nMax), FUNIT_TWIP); 1591 return 0; 1592 } 1593 1594 // ----------------------------------------------------------------------- 1595 1596 void SvxPageDescPage::CalcMargin_Impl() 1597 { 1598 // Aktuelle Werte der Seitenr"ander 1599 long nBT = GetCoreValue( aTopMarginEdit, SFX_MAPUNIT_TWIP ); 1600 long nBB = GetCoreValue( aBottomMarginEdit, SFX_MAPUNIT_TWIP ); 1601 1602 long nBL = GetCoreValue( aLeftMarginEdit, SFX_MAPUNIT_TWIP ); 1603 long nBR = GetCoreValue( aRightMarginEdit, SFX_MAPUNIT_TWIP ); 1604 1605 long nH = GetCoreValue( aPaperHeightEdit, SFX_MAPUNIT_TWIP ); 1606 long nW = GetCoreValue( aPaperWidthEdit, SFX_MAPUNIT_TWIP ); 1607 1608 long nWidth = nBL + nBR + MINBODY; 1609 long nHeight = nBT + nBB + MINBODY; 1610 1611 if ( nWidth > nW || nHeight > nH ) 1612 { 1613 if ( nWidth > nW ) 1614 { 1615 long nTmp = nBL <= nBR ? nBR : nBL; 1616 nTmp -= nWidth - nW; 1617 1618 if ( nBL <= nBR ) 1619 SetMetricValue( aRightMarginEdit, nTmp, SFX_MAPUNIT_TWIP ); 1620 else 1621 SetMetricValue( aLeftMarginEdit, nTmp, SFX_MAPUNIT_TWIP ); 1622 } 1623 1624 if ( nHeight > nH ) 1625 { 1626 long nTmp = nBT <= nBB ? nBB : nBT; 1627 nTmp -= nHeight - nH; 1628 1629 if ( nBT <= nBB ) 1630 SetMetricValue( aBottomMarginEdit, nTmp, SFX_MAPUNIT_TWIP ); 1631 else 1632 SetMetricValue( aTopMarginEdit, nTmp, SFX_MAPUNIT_TWIP ); 1633 } 1634 } 1635 } 1636 1637 // ----------------------------------------------------------------------- 1638 1639 IMPL_LINK_INLINE_START( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG ) 1640 { 1641 aBspWin.SetHorz( aHorzBox.IsChecked() ); 1642 aBspWin.SetVert( aVertBox.IsChecked() ); 1643 UpdateExample_Impl(); 1644 return 0; 1645 } 1646 IMPL_LINK_INLINE_END( SvxPageDescPage, CenterHdl_Impl, CheckBox *, EMPTYARG ) 1647 1648 // ----------------------------------------------------------------------- 1649 1650 void SvxPageDescPage::SetCollectionList(const List* pList) 1651 { 1652 sStandardRegister = *(String*)pList->GetObject(0); 1653 for( sal_uInt16 i = 1; i < pList->Count(); i++ ) 1654 { 1655 aRegisterLB.InsertEntry(*(String*)pList->GetObject(i)); 1656 } 1657 1658 aRegisterCB .Show(); 1659 aRegisterFT .Show(); 1660 aRegisterLB.Show(); 1661 aRegisterCB.SetClickHdl(LINK(this, SvxPageDescPage, RegisterModify)); 1662 } 1663 1664 // ----------------------------------------------------------------------- 1665 1666 IMPL_LINK( SvxPageDescPage, RegisterModify, CheckBox*, pBox ) 1667 { 1668 sal_Bool bEnable = sal_False; 1669 if(pBox->IsChecked()) 1670 { 1671 bEnable = sal_True; 1672 if(USHRT_MAX == aRegisterLB.GetSelectEntryPos()) 1673 aRegisterLB.SelectEntry(sStandardRegister); 1674 } 1675 aRegisterFT.Enable( bEnable ); 1676 aRegisterLB.Enable( bEnable ); 1677 return 0; 1678 } 1679 1680 // ---------------------------------------------------------------------------- 1681 1682 void SvxPageDescPage::DisableVerticalPageDir() 1683 { 1684 aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_RIGHT ); 1685 aTextFlowBox.RemoveEntryValue( FRMDIR_VERT_TOP_LEFT ); 1686 if( aTextFlowBox.GetEntryCount() < 2 ) 1687 { 1688 aTextFlowLbl.Hide(); 1689 aTextFlowBox.Hide(); 1690 aBspWin.EnableFrameDirection( sal_False ); 1691 } 1692 } 1693 1694 IMPL_LINK( SvxPageDescPage, FrameDirectionModify_Impl, ListBox*, EMPTYARG) 1695 { 1696 aBspWin.SetFrameDirection( (sal_uInt32) aTextFlowBox.GetSelectEntryValue() ); 1697 aBspWin.Invalidate(); 1698 return 0; 1699 } 1700 1701 bool SvxPageDescPage::IsPrinterRangeOverflow( 1702 MetricField& rField, long nFirstMargin, long nLastMargin, MarginPosition nPos ) 1703 { 1704 bool bRet = false; 1705 bool bCheck = ( ( pImpl->m_nPos & nPos ) == 0 ); 1706 long nValue = static_cast<long>(rField.GetValue()); 1707 if ( bCheck && 1708 ( nValue < nFirstMargin || nValue > nLastMargin ) && 1709 rField.GetText() != rField.GetSavedValue() ) 1710 { 1711 rField.SetValue( nValue < nFirstMargin ? nFirstMargin : nLastMargin ); 1712 bRet = true; 1713 } 1714 1715 return bRet; 1716 } 1717 1718 /** Check if a value of a margin edit is outside the printer paper margins 1719 and save this information. 1720 */ 1721 void SvxPageDescPage::CheckMarginEdits( bool _bClear ) 1722 { 1723 if ( _bClear ) 1724 pImpl->m_nPos = 0; 1725 1726 sal_Int64 nValue = aLeftMarginEdit.GetValue(); 1727 if ( nValue < nFirstLeftMargin || nValue > nLastLeftMargin ) 1728 pImpl->m_nPos |= MARGIN_LEFT; 1729 nValue = aRightMarginEdit.GetValue(); 1730 if ( nValue < nFirstRightMargin || nValue > nLastRightMargin ) 1731 pImpl->m_nPos |= MARGIN_RIGHT; 1732 nValue = aTopMarginEdit.GetValue(); 1733 if ( nValue < nFirstTopMargin || nValue > nLastTopMargin ) 1734 pImpl->m_nPos |= MARGIN_TOP; 1735 nValue = aBottomMarginEdit.GetValue(); 1736 if ( nValue < nFirstBottomMargin || nValue > nLastBottomMargin ) 1737 pImpl->m_nPos |= MARGIN_BOTTOM; 1738 } 1739 1740 bool SvxPageDescPage::IsMarginOutOfRange() 1741 { 1742 bool bRet = ( ( ( !( pImpl->m_nPos & MARGIN_LEFT ) && 1743 ( aLeftMarginEdit.GetText() != aLeftMarginEdit.GetSavedValue() ) ) && 1744 ( aLeftMarginEdit.GetValue() < nFirstLeftMargin || 1745 aLeftMarginEdit.GetValue() > nLastLeftMargin ) ) || 1746 ( ( !( pImpl->m_nPos & MARGIN_RIGHT ) && 1747 ( aRightMarginEdit.GetText() != aRightMarginEdit.GetSavedValue() ) ) && 1748 ( aRightMarginEdit.GetValue() < nFirstRightMargin || 1749 aRightMarginEdit.GetValue() > nLastRightMargin ) ) || 1750 ( ( !( pImpl->m_nPos & MARGIN_TOP ) && 1751 ( aTopMarginEdit.GetText() != aTopMarginEdit.GetSavedValue() ) ) && 1752 ( aTopMarginEdit.GetValue() < nFirstTopMargin || 1753 aTopMarginEdit.GetValue() > nLastTopMargin ) ) || 1754 ( ( !( pImpl->m_nPos & MARGIN_BOTTOM ) && 1755 ( aBottomMarginEdit.GetText() != aBottomMarginEdit.GetSavedValue() ) ) && 1756 ( aBottomMarginEdit.GetValue() < nFirstBottomMargin || 1757 aBottomMarginEdit.GetValue() > nLastBottomMargin ) ) ); 1758 return bRet; 1759 } 1760 1761 void SvxPageDescPage::PageCreated (SfxAllItemSet aSet) //add CHINA001 1762 { 1763 SFX_ITEMSET_ARG (&aSet,pModeItem,SfxAllEnumItem,SID_ENUM_PAGE_MODE,sal_False); 1764 SFX_ITEMSET_ARG (&aSet,pPaperStartItem,SfxAllEnumItem,SID_PAPER_START,sal_False); 1765 SFX_ITEMSET_ARG (&aSet,pPaperEndItem,SfxAllEnumItem,SID_PAPER_END,sal_False); 1766 SFX_ITEMSET_ARG (&aSet,pCollectListItem,SfxStringListItem,SID_COLLECT_LIST,sal_False); 1767 if (pModeItem) 1768 SetMode((SvxModeType)pModeItem->GetEnumValue()); 1769 if (pPaperStartItem && pPaperEndItem) 1770 SetPaperFormatRanges( (Paper)pPaperStartItem->GetEnumValue(), (Paper)pPaperEndItem->GetEnumValue() ); 1771 if (pCollectListItem) 1772 SetCollectionList(pCollectListItem->GetList()); 1773 } 1774