1*b3f79822SAndrew Rist /**************************************************************
2cdf0e10cSrcweir *
3*b3f79822SAndrew Rist * Licensed to the Apache Software Foundation (ASF) under one
4*b3f79822SAndrew Rist * or more contributor license agreements. See the NOTICE file
5*b3f79822SAndrew Rist * distributed with this work for additional information
6*b3f79822SAndrew Rist * regarding copyright ownership. The ASF licenses this file
7*b3f79822SAndrew Rist * to you under the Apache License, Version 2.0 (the
8*b3f79822SAndrew Rist * "License"); you may not use this file except in compliance
9*b3f79822SAndrew Rist * with the License. You may obtain a copy of the License at
10*b3f79822SAndrew Rist *
11*b3f79822SAndrew Rist * http://www.apache.org/licenses/LICENSE-2.0
12*b3f79822SAndrew Rist *
13*b3f79822SAndrew Rist * Unless required by applicable law or agreed to in writing,
14*b3f79822SAndrew Rist * software distributed under the License is distributed on an
15*b3f79822SAndrew Rist * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16*b3f79822SAndrew Rist * KIND, either express or implied. See the License for the
17*b3f79822SAndrew Rist * specific language governing permissions and limitations
18*b3f79822SAndrew Rist * under the License.
19*b3f79822SAndrew Rist *
20*b3f79822SAndrew Rist *************************************************************/
21*b3f79822SAndrew Rist
22*b3f79822SAndrew Rist
23cdf0e10cSrcweir
24cdf0e10cSrcweir // MARKER(update_precomp.py): autogen include statement, do not remove
25cdf0e10cSrcweir #include "precompiled_sc.hxx"
26cdf0e10cSrcweir
27cdf0e10cSrcweir #include "fuconpol.hxx"
28cdf0e10cSrcweir #include "tabvwsh.hxx"
29cdf0e10cSrcweir #include "sc.hrc"
30cdf0e10cSrcweir #include "drawview.hxx"
31cdf0e10cSrcweir
32cdf0e10cSrcweir // #98185# Create default drawing objects via keyboard
33cdf0e10cSrcweir #include <svx/svdopath.hxx>
34cdf0e10cSrcweir #include <basegfx/polygon/b2dpolygon.hxx>
35cdf0e10cSrcweir #include <basegfx/point/b2dpoint.hxx>
36cdf0e10cSrcweir
37cdf0e10cSrcweir // Pixelabstand zum Schliessen von Freihand-Zeichnungen
38cdf0e10cSrcweir #ifndef CLOSE_PIXDIST
39cdf0e10cSrcweir #define CLOSE_PIXDIST 5
40cdf0e10cSrcweir #endif
41cdf0e10cSrcweir
42cdf0e10cSrcweir //------------------------------------------------------------------------
43cdf0e10cSrcweir
44cdf0e10cSrcweir /*************************************************************************
45cdf0e10cSrcweir |*
46cdf0e10cSrcweir |* Konstruktor
47cdf0e10cSrcweir |*
48cdf0e10cSrcweir \************************************************************************/
49cdf0e10cSrcweir
FuConstPolygon(ScTabViewShell * pViewSh,Window * pWin,ScDrawView * pViewP,SdrModel * pDoc,SfxRequest & rReq)50cdf0e10cSrcweir FuConstPolygon::FuConstPolygon(ScTabViewShell* pViewSh, Window* pWin, ScDrawView* pViewP,
51cdf0e10cSrcweir SdrModel* pDoc, SfxRequest& rReq)
52cdf0e10cSrcweir : FuConstruct(pViewSh, pWin, pViewP, pDoc, rReq)
53cdf0e10cSrcweir {
54cdf0e10cSrcweir }
55cdf0e10cSrcweir
56cdf0e10cSrcweir /*************************************************************************
57cdf0e10cSrcweir |*
58cdf0e10cSrcweir |* Destruktor
59cdf0e10cSrcweir |*
60cdf0e10cSrcweir \************************************************************************/
61cdf0e10cSrcweir
~FuConstPolygon()62cdf0e10cSrcweir FuConstPolygon::~FuConstPolygon()
63cdf0e10cSrcweir {
64cdf0e10cSrcweir }
65cdf0e10cSrcweir
66cdf0e10cSrcweir /*************************************************************************
67cdf0e10cSrcweir |*
68cdf0e10cSrcweir |* MouseButtonDown-event
69cdf0e10cSrcweir |*
70cdf0e10cSrcweir \************************************************************************/
71cdf0e10cSrcweir
MouseButtonDown(const MouseEvent & rMEvt)72cdf0e10cSrcweir sal_Bool __EXPORT FuConstPolygon::MouseButtonDown(const MouseEvent& rMEvt)
73cdf0e10cSrcweir {
74cdf0e10cSrcweir // #95491# remember button state for creation of own MouseEvents
75cdf0e10cSrcweir SetMouseButtonCode(rMEvt.GetButtons());
76cdf0e10cSrcweir
77cdf0e10cSrcweir sal_Bool bReturn = FuConstruct::MouseButtonDown(rMEvt);
78cdf0e10cSrcweir
79cdf0e10cSrcweir SdrViewEvent aVEvt;
80cdf0e10cSrcweir (void)pView->PickAnything(rMEvt, SDRMOUSEBUTTONDOWN, aVEvt);
81cdf0e10cSrcweir if (aVEvt.eEvent == SDREVENT_BEGTEXTEDIT)
82cdf0e10cSrcweir {
83cdf0e10cSrcweir // Texteingabe hier nicht zulassen
84cdf0e10cSrcweir aVEvt.eEvent = SDREVENT_BEGDRAGOBJ;
85cdf0e10cSrcweir pView->EnableExtendedMouseEventDispatcher(sal_False);
86cdf0e10cSrcweir }
87cdf0e10cSrcweir else
88cdf0e10cSrcweir {
89cdf0e10cSrcweir pView->EnableExtendedMouseEventDispatcher(sal_True);
90cdf0e10cSrcweir }
91cdf0e10cSrcweir
92cdf0e10cSrcweir if ( pView->MouseButtonDown(rMEvt, pWindow) )
93cdf0e10cSrcweir bReturn = sal_True;
94cdf0e10cSrcweir
95cdf0e10cSrcweir return bReturn;
96cdf0e10cSrcweir }
97cdf0e10cSrcweir
98cdf0e10cSrcweir /*************************************************************************
99cdf0e10cSrcweir |*
100cdf0e10cSrcweir |* MouseMove-event
101cdf0e10cSrcweir |*
102cdf0e10cSrcweir \************************************************************************/
103cdf0e10cSrcweir
MouseMove(const MouseEvent & rMEvt)104cdf0e10cSrcweir sal_Bool __EXPORT FuConstPolygon::MouseMove(const MouseEvent& rMEvt)
105cdf0e10cSrcweir {
106cdf0e10cSrcweir pView->MouseMove(rMEvt, pWindow);
107cdf0e10cSrcweir sal_Bool bReturn = FuConstruct::MouseMove(rMEvt);
108cdf0e10cSrcweir return bReturn;
109cdf0e10cSrcweir }
110cdf0e10cSrcweir
111cdf0e10cSrcweir /*************************************************************************
112cdf0e10cSrcweir |*
113cdf0e10cSrcweir |* MouseButtonUp-event
114cdf0e10cSrcweir |*
115cdf0e10cSrcweir \************************************************************************/
116cdf0e10cSrcweir
MouseButtonUp(const MouseEvent & rMEvt)117cdf0e10cSrcweir sal_Bool __EXPORT FuConstPolygon::MouseButtonUp(const MouseEvent& rMEvt)
118cdf0e10cSrcweir {
119cdf0e10cSrcweir // #95491# remember button state for creation of own MouseEvents
120cdf0e10cSrcweir SetMouseButtonCode(rMEvt.GetButtons());
121cdf0e10cSrcweir
122cdf0e10cSrcweir sal_Bool bReturn = sal_False;
123cdf0e10cSrcweir sal_Bool bSimple = sal_False;
124cdf0e10cSrcweir
125cdf0e10cSrcweir SdrViewEvent aVEvt;
126cdf0e10cSrcweir (void)pView->PickAnything(rMEvt, SDRMOUSEBUTTONUP, aVEvt);
127cdf0e10cSrcweir
128cdf0e10cSrcweir pView->MouseButtonUp(rMEvt, pWindow);
129cdf0e10cSrcweir
130cdf0e10cSrcweir if (aVEvt.eEvent == SDREVENT_ENDCREATE)
131cdf0e10cSrcweir {
132cdf0e10cSrcweir bReturn = sal_True;
133cdf0e10cSrcweir bSimple = sal_True; // Doppelklick nicht weiterreichen
134cdf0e10cSrcweir }
135cdf0e10cSrcweir
136cdf0e10cSrcweir sal_Bool bParent;
137cdf0e10cSrcweir if (bSimple)
138cdf0e10cSrcweir bParent = FuConstruct::SimpleMouseButtonUp(rMEvt);
139cdf0e10cSrcweir else
140cdf0e10cSrcweir bParent = FuConstruct::MouseButtonUp(rMEvt);
141cdf0e10cSrcweir
142cdf0e10cSrcweir return (bParent || bReturn);
143cdf0e10cSrcweir }
144cdf0e10cSrcweir
145cdf0e10cSrcweir /*************************************************************************
146cdf0e10cSrcweir |*
147cdf0e10cSrcweir |* Tastaturereignisse bearbeiten
148cdf0e10cSrcweir |*
149cdf0e10cSrcweir |* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls
150cdf0e10cSrcweir |* FALSE.
151cdf0e10cSrcweir |*
152cdf0e10cSrcweir \************************************************************************/
153cdf0e10cSrcweir
KeyInput(const KeyEvent & rKEvt)154cdf0e10cSrcweir sal_Bool __EXPORT FuConstPolygon::KeyInput(const KeyEvent& rKEvt)
155cdf0e10cSrcweir {
156cdf0e10cSrcweir sal_Bool bReturn = FuConstruct::KeyInput(rKEvt);
157cdf0e10cSrcweir
158cdf0e10cSrcweir return(bReturn);
159cdf0e10cSrcweir }
160cdf0e10cSrcweir
161cdf0e10cSrcweir /*************************************************************************
162cdf0e10cSrcweir |*
163cdf0e10cSrcweir |* Function aktivieren
164cdf0e10cSrcweir |*
165cdf0e10cSrcweir \************************************************************************/
166cdf0e10cSrcweir
Activate()167cdf0e10cSrcweir void FuConstPolygon::Activate()
168cdf0e10cSrcweir {
169cdf0e10cSrcweir pView->EnableExtendedMouseEventDispatcher(sal_True);
170cdf0e10cSrcweir
171cdf0e10cSrcweir SdrObjKind eKind;
172cdf0e10cSrcweir
173cdf0e10cSrcweir switch (GetSlotID())
174cdf0e10cSrcweir {
175cdf0e10cSrcweir case SID_DRAW_POLYGON_NOFILL:
176cdf0e10cSrcweir case SID_DRAW_XPOLYGON_NOFILL:
177cdf0e10cSrcweir {
178cdf0e10cSrcweir eKind = OBJ_PLIN;
179cdf0e10cSrcweir }
180cdf0e10cSrcweir break;
181cdf0e10cSrcweir
182cdf0e10cSrcweir case SID_DRAW_POLYGON:
183cdf0e10cSrcweir case SID_DRAW_XPOLYGON:
184cdf0e10cSrcweir {
185cdf0e10cSrcweir eKind = OBJ_POLY;
186cdf0e10cSrcweir }
187cdf0e10cSrcweir break;
188cdf0e10cSrcweir
189cdf0e10cSrcweir case SID_DRAW_BEZIER_NOFILL:
190cdf0e10cSrcweir {
191cdf0e10cSrcweir eKind = OBJ_PATHLINE;
192cdf0e10cSrcweir }
193cdf0e10cSrcweir break;
194cdf0e10cSrcweir
195cdf0e10cSrcweir case SID_DRAW_BEZIER_FILL:
196cdf0e10cSrcweir {
197cdf0e10cSrcweir eKind = OBJ_PATHFILL;
198cdf0e10cSrcweir }
199cdf0e10cSrcweir break;
200cdf0e10cSrcweir
201cdf0e10cSrcweir case SID_DRAW_FREELINE_NOFILL:
202cdf0e10cSrcweir {
203cdf0e10cSrcweir eKind = OBJ_FREELINE;
204cdf0e10cSrcweir }
205cdf0e10cSrcweir break;
206cdf0e10cSrcweir
207cdf0e10cSrcweir case SID_DRAW_FREELINE:
208cdf0e10cSrcweir {
209cdf0e10cSrcweir eKind = OBJ_FREEFILL;
210cdf0e10cSrcweir }
211cdf0e10cSrcweir break;
212cdf0e10cSrcweir
213cdf0e10cSrcweir default:
214cdf0e10cSrcweir {
215cdf0e10cSrcweir eKind = OBJ_PATHLINE;
216cdf0e10cSrcweir }
217cdf0e10cSrcweir break;
218cdf0e10cSrcweir }
219cdf0e10cSrcweir
220cdf0e10cSrcweir pView->SetCurrentObj(sal::static_int_cast<sal_uInt16>(eKind));
221cdf0e10cSrcweir
222cdf0e10cSrcweir pView->SetEditMode(SDREDITMODE_CREATE);
223cdf0e10cSrcweir
224cdf0e10cSrcweir FuConstruct::Activate();
225cdf0e10cSrcweir
226cdf0e10cSrcweir aNewPointer = Pointer( POINTER_DRAW_POLYGON );
227cdf0e10cSrcweir aOldPointer = pWindow->GetPointer();
228cdf0e10cSrcweir pViewShell->SetActivePointer( aNewPointer );
229cdf0e10cSrcweir }
230cdf0e10cSrcweir
231cdf0e10cSrcweir /*************************************************************************
232cdf0e10cSrcweir |*
233cdf0e10cSrcweir |* Function deaktivieren
234cdf0e10cSrcweir |*
235cdf0e10cSrcweir \************************************************************************/
236cdf0e10cSrcweir
Deactivate()237cdf0e10cSrcweir void FuConstPolygon::Deactivate()
238cdf0e10cSrcweir {
239cdf0e10cSrcweir pView->SetEditMode(SDREDITMODE_EDIT);
240cdf0e10cSrcweir
241cdf0e10cSrcweir pView->EnableExtendedMouseEventDispatcher(sal_False);
242cdf0e10cSrcweir
243cdf0e10cSrcweir FuConstruct::Deactivate();
244cdf0e10cSrcweir
245cdf0e10cSrcweir pViewShell->SetActivePointer( aOldPointer );
246cdf0e10cSrcweir }
247cdf0e10cSrcweir
248cdf0e10cSrcweir // #98185# Create default drawing objects via keyboard
CreateDefaultObject(const sal_uInt16 nID,const Rectangle & rRectangle)249cdf0e10cSrcweir SdrObject* FuConstPolygon::CreateDefaultObject(const sal_uInt16 nID, const Rectangle& rRectangle)
250cdf0e10cSrcweir {
251cdf0e10cSrcweir // case SID_DRAW_POLYGON:
252cdf0e10cSrcweir // case SID_DRAW_POLYGON_NOFILL:
253cdf0e10cSrcweir // case SID_DRAW_BEZIER_NOFILL:
254cdf0e10cSrcweir // case SID_DRAW_FREELINE_NOFILL:
255cdf0e10cSrcweir
256cdf0e10cSrcweir SdrObject* pObj = SdrObjFactory::MakeNewObject(
257cdf0e10cSrcweir pView->GetCurrentObjInventor(), pView->GetCurrentObjIdentifier(),
258cdf0e10cSrcweir 0L, pDrDoc);
259cdf0e10cSrcweir
260cdf0e10cSrcweir if(pObj)
261cdf0e10cSrcweir {
262cdf0e10cSrcweir if(pObj->ISA(SdrPathObj))
263cdf0e10cSrcweir {
264cdf0e10cSrcweir basegfx::B2DPolyPolygon aPoly;
265cdf0e10cSrcweir
266cdf0e10cSrcweir switch(nID)
267cdf0e10cSrcweir {
268cdf0e10cSrcweir case SID_DRAW_BEZIER_NOFILL:
269cdf0e10cSrcweir {
270cdf0e10cSrcweir basegfx::B2DPolygon aInnerPoly;
271cdf0e10cSrcweir
272cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Bottom()));
273cdf0e10cSrcweir
274cdf0e10cSrcweir const basegfx::B2DPoint aCenterBottom(rRectangle.Center().X(), rRectangle.Bottom());
275cdf0e10cSrcweir aInnerPoly.appendBezierSegment(
276cdf0e10cSrcweir aCenterBottom,
277cdf0e10cSrcweir aCenterBottom,
278cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Center().X(), rRectangle.Center().Y()));
279cdf0e10cSrcweir
280cdf0e10cSrcweir const basegfx::B2DPoint aCenterTop(rRectangle.Center().X(), rRectangle.Top());
281cdf0e10cSrcweir aInnerPoly.appendBezierSegment(
282cdf0e10cSrcweir aCenterTop,
283cdf0e10cSrcweir aCenterTop,
284cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Right(), rRectangle.Top()));
285cdf0e10cSrcweir
286cdf0e10cSrcweir aPoly.append(aInnerPoly);
287cdf0e10cSrcweir break;
288cdf0e10cSrcweir }
289cdf0e10cSrcweir case SID_DRAW_FREELINE_NOFILL:
290cdf0e10cSrcweir {
291cdf0e10cSrcweir basegfx::B2DPolygon aInnerPoly;
292cdf0e10cSrcweir
293cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Bottom()));
294cdf0e10cSrcweir
295cdf0e10cSrcweir aInnerPoly.appendBezierSegment(
296cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Left(), rRectangle.Top()),
297cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Center().X(), rRectangle.Top()),
298cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Center().X(), rRectangle.Center().Y()));
299cdf0e10cSrcweir
300cdf0e10cSrcweir aInnerPoly.appendBezierSegment(
301cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Center().X(), rRectangle.Bottom()),
302cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Right(), rRectangle.Bottom()),
303cdf0e10cSrcweir basegfx::B2DPoint(rRectangle.Right(), rRectangle.Top()));
304cdf0e10cSrcweir
305cdf0e10cSrcweir aPoly.append(aInnerPoly);
306cdf0e10cSrcweir break;
307cdf0e10cSrcweir }
308cdf0e10cSrcweir case SID_DRAW_POLYGON:
309cdf0e10cSrcweir case SID_DRAW_POLYGON_NOFILL:
310cdf0e10cSrcweir {
311cdf0e10cSrcweir basegfx::B2DPolygon aInnerPoly;
312cdf0e10cSrcweir const sal_Int32 nWdt(rRectangle.GetWidth());
313cdf0e10cSrcweir const sal_Int32 nHgt(rRectangle.GetHeight());
314cdf0e10cSrcweir
315cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Bottom()));
316cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left() + (nWdt * 30) / 100, rRectangle.Top() + (nHgt * 70) / 100));
317cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Top() + (nHgt * 15) / 100));
318cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left() + (nWdt * 65) / 100, rRectangle.Top()));
319cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left() + nWdt, rRectangle.Top() + (nHgt * 30) / 100));
320cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left() + (nWdt * 80) / 100, rRectangle.Top() + (nHgt * 50) / 100));
321cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Left() + (nWdt * 80) / 100, rRectangle.Top() + (nHgt * 75) / 100));
322cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Bottom(), rRectangle.Right()));
323cdf0e10cSrcweir
324cdf0e10cSrcweir if(SID_DRAW_POLYGON_NOFILL == nID)
325cdf0e10cSrcweir {
326cdf0e10cSrcweir aInnerPoly.append(basegfx::B2DPoint(rRectangle.Center().X(), rRectangle.Bottom()));
327cdf0e10cSrcweir }
328cdf0e10cSrcweir else
329cdf0e10cSrcweir {
330cdf0e10cSrcweir aInnerPoly.setClosed(true);
331cdf0e10cSrcweir }
332cdf0e10cSrcweir
333cdf0e10cSrcweir aPoly.append(aInnerPoly);
334cdf0e10cSrcweir break;
335cdf0e10cSrcweir }
336cdf0e10cSrcweir }
337cdf0e10cSrcweir
338cdf0e10cSrcweir ((SdrPathObj*)pObj)->SetPathPoly(aPoly);
339cdf0e10cSrcweir }
340cdf0e10cSrcweir else
341cdf0e10cSrcweir {
342cdf0e10cSrcweir DBG_ERROR("Object is NO path object");
343cdf0e10cSrcweir }
344cdf0e10cSrcweir
345cdf0e10cSrcweir pObj->SetLogicRect(rRectangle);
346cdf0e10cSrcweir }
347cdf0e10cSrcweir
348cdf0e10cSrcweir return pObj;
349cdf0e10cSrcweir }
350cdf0e10cSrcweir
351cdf0e10cSrcweir // eof
352