modules/installer/epmfile.pm

#**************************************************************
#
#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing,
#  software distributed under the License is distributed on an
#  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#  KIND, either express or implied.  See the License for the
#  specific language governing permissions and limitations
#  under the License.
#
#**************************************************************


package installer::epmfile;

use Cwd;
use installer::converter;
use installer::existence;
use installer::exiter;
use installer::files;
use installer::globals;
use installer::logger;
use installer::packagelist;
use installer::pathanalyzer;
use installer::remover;
use installer::scriptitems;
use installer::systemactions;
use installer::worker;
use POSIX qw(uname);

############################################################################
# Reading the package map to find Solaris package names for
# the corresponding abbreviations
############################################################################

sub read_packagemap
{
    my ($allvariables, $includepatharrayref, $languagesarrayref) = @_;

    my $packagemapname = "";
    if ( $allvariables->{'PACKAGEMAP'} ) { $packagemapname = $allvariables->{'PACKAGEMAP'}; }
    if ( $packagemapname eq "" ) { installer::exiter::exit_program("ERROR: Property PACKAGEMAP must be defined!", "read_packagemap"); }

    $installer::logger::Lang->printf("\n");
    $installer::logger::Lang->printf("\n");
    $installer::logger::Lang->printf("nCollected abbreviations and package names:\n");

    # Can be a comma separated list. All files have to be found in include paths
    my $allpackagemapnames = installer::converter::convert_stringlist_into_hash(\$packagemapname, ",");
    foreach my $onepackagemapname ( keys %{$allpackagemapnames} )
    {
        my $packagemapref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$onepackagemapname, $includepatharrayref, 0);

        if ( $$packagemapref eq "" ) { installer::exiter::exit_program("ERROR: Could not find package map file \"$onepackagemapname\" (propery PACKAGEMAP)!", "read_packagemap"); }

        my $packagemapcontent = installer::files::read_file($$packagemapref);

        for ( my $i = 0; $i <= $#{$packagemapcontent}; $i++ )
        {
            my $line = ${$packagemapcontent}[$i];

            if ( $line =~ /^\s*\#/ ) { next; }  # comment line
            if ( $line =~ /^\s*$/ ) { next; }  # empty line

            if ( $line =~ /^\s*(.*?)\t(.*?)\s*$/ )
            {
                my $abbreviation = $1;
                my $packagename = $2;
                installer::packagelist::resolve_packagevariables(\$abbreviation, $allvariables, 0);
                installer::packagelist::resolve_packagevariables(\$packagename, $allvariables, 0);

                # Special handling for language strings %LANGUAGESTRING

                if (( $abbreviation =~ /\%LANGUAGESTRING/ ) || ( $packagename =~ /\%LANGUAGESTRING/ ))
                {
                    foreach my $onelang ( @{$languagesarrayref} )
                    {
                        my $local_abbreviation = $abbreviation;
                        my $local_packagename = $packagename;
                        $local_abbreviation =~ s/\%LANGUAGESTRING/$onelang/g;
                        $local_packagename =~ s/\%LANGUAGESTRING/$onelang/g;

                        # Logging all abbreviations and packagenames
                        $installer::logger::Lang->printf("%s : %s : %s\n",
                            $onelang,
                            $local_abbreviation,
                            $local_packagename);

                        if ( exists($installer::globals::dependfilenames{$local_abbreviation}) )
                        {
                            installer::exiter::exit_program("ERROR: Packagename for  Solaris package $local_abbreviation already defined ($installer::globals::dependfilenames{$local_abbreviation})!", "read_packagemap");
                        }
                        else
                        {
                            $installer::globals::dependfilenames{$local_abbreviation} = $local_packagename;
                        }
                    }
                }
                else
                {
                    # Logging all abbreviations and packagenames
                    $installer::logger::Lang->printf("%s : %s\n", $abbreviation, $packagename);

                    if ( exists($installer::globals::dependfilenames{$abbreviation}) )
                    {
                        installer::exiter::exit_program("ERROR: Packagename for  Solaris package $abbreviation already defined ($installer::globals::dependfilenames{$abbreviation})!", "read_packagemap");
                    }
                    else
                    {
                        $installer::globals::dependfilenames{$abbreviation} = $packagename;
                    }
                }
            }
            else
            {
                my $errorline = $i + 1;
                installer::exiter::exit_program("ERROR: Wrong syntax in file \"$onepackagemapname\" (line $errorline)!", "read_packagemap");
            }
        }
    }

    $installer::logger::Lang->print("\n");
    $installer::logger::Lang->print("\n");
}

############################################################################
# The header file contains the strings for the epm header in all languages
############################################################################

sub get_string_from_headerfile
{
    my ($searchstring, $language, $fileref) = @_;

    my $returnstring  = "";
    my $onestring  = "";
    my $englishstring  = "";
    my $foundblock = 0;
    my $foundstring = 0;
    my $foundenglishstring = 0;
    my $englishidentifier = "01";

    $searchstring = "[" . $searchstring . "]";

    for ( my $i = 0; $i <= $#{$fileref}; $i++ )
    {
        my $line = ${$fileref}[$i];

        if ( $line =~ /^\s*\Q$searchstring\E\s*$/ )
        {
            $foundblock = 1;
            my $counter = $i + 1;

            $line = ${$fileref}[$counter];

            # Beginning of the next block oder Dateiende

            while ((!($line =~ /^\s*\[\s*\w+\s*\]\s*$/ )) && ( $counter <= $#{$fileref} ))
            {
                if ( $line =~ /^\s*\Q$language\E\s+\=\s*\"(.*)\"\s*$/ )
                {
                    $onestring = $1;
                    $foundstring = 1;
                    last;
                }

                if ( $line =~ /^\s*\Q$englishidentifier\E\s+\=\s*\"(.*)\"\s*$/ )
                {
                    $englishstring = $1;
                    $foundenglishstring = 1;
                }

                $counter++;
                $line = ${$fileref}[$counter];
            }
        }
    }

    if ( $foundstring )
    {
        $returnstring = $onestring;
    }
    else
    {
        if ( $foundenglishstring )
        {
            $returnstring = $englishstring;
        }
        else
        {
            installer::exiter::exit_program("ERROR: No string found for $searchstring in epm header file (-h)", "get_string_from_headerfile");
        }
    }

    return \$returnstring;
}

##########################################################
# Filling the epm file with directories, files and links
##########################################################

sub put_directories_into_epmfile
{
    my ($directoriesarrayref, $epmfileref, $allvariables, $packagerootpath) = @_;
    my $group = "bin";

    if ( $installer::globals::islinuxbuild )
    {
        $group = "root";
    }

    for ( my $i = 0; $i <= $#{$directoriesarrayref}; $i++ )
    {
        my $onedir = ${$directoriesarrayref}[$i];
        my $dir = "";

        if ( $onedir->{'Dir'} ) { $dir = $onedir->{'Dir'}; }

        # if (!($dir =~ /\bPREDEFINED_/ ))
        if ((!($dir =~ /\bPREDEFINED_/ )) || ( $dir =~ /\bPREDEFINED_PROGDIR\b/ ))
        {
            my $hostname = $onedir->{'HostName'};

            # not including simple directory "/opt"
            # if (( $allvariables->{'SETSTATICPATH'} ) && ( $hostname eq $packagerootpath )) { next; }

            my $line = "d 755 root $group $hostname -\n";

            push(@{$epmfileref}, $line)
        }
    }
}

sub put_files_into_epmfile
{
    my ($filesinproductarrayref, $epmfileref) = @_;

    for ( my $i = 0; $i <= $#{$filesinproductarrayref}; $i++ )
    {
        my $onefile = ${$filesinproductarrayref}[$i];

        my $unixrights = $onefile->{'UnixRights'};
        my $destination = $onefile->{'destination'};
        my $sourcepath = $onefile->{'sourcepath'};

        my $filetype = "f";
        my $styles = "";
        if ( $onefile->{'Styles'} ) { $styles = $onefile->{'Styles'}; }
        if ( $styles =~ /\bCONFIGFILE\b/ ) { $filetype = "c"; }

        my $group = "bin";
        if ( $installer::globals::islinuxbuild ) { $group = "root"; }
        if (( $installer::globals::issolarisbuild ) && ( $onefile->{'SolarisGroup'} )) { $group = $onefile->{'SolarisGroup'}; }

        my $line = "$filetype $unixrights root $group $destination $sourcepath\n";

        push(@{$epmfileref}, $line);
    }
}

sub put_links_into_epmfile
{
    my ($linksinproductarrayref, $epmfileref) = @_;
    my $group = "bin";

    if ( $installer::globals::islinuxbuild )
    {
        $group = "root";
    }


    for ( my $i = 0; $i <= $#{$linksinproductarrayref}; $i++ )
    {
        my $onelink = ${$linksinproductarrayref}[$i];
        my $destination = $onelink->{'destination'};
        my $destinationfile = $onelink->{'destinationfile'};

        my $line = "l 000 root $group $destination $destinationfile\n";

        push(@{$epmfileref}, $line)
    }
}

sub put_unixlinks_into_epmfile
{
    my ($unixlinksinproductarrayref, $epmfileref) = @_;
    my $group = "bin";

    if ( $installer::globals::islinuxbuild ) { $group = "root"; }

    for ( my $i = 0; $i <= $#{$unixlinksinproductarrayref}; $i++ )
    {
        my $onelink = ${$unixlinksinproductarrayref}[$i];
        my $destination = $onelink->{'destination'};
        my $target = $onelink->{'Target'};

        my $line = "l 000 root $group $destination $target\n";

        push(@{$epmfileref}, $line)
    }
}

###############################################
# Creating epm header file
###############################################

sub create_epm_header
{
    my ($variableshashref, $filesinproduct, $languagesref, $onepackage) = @_;

    my @epmheader = ();

    my ($licensefilename, $readmefilename);

    my $foundlicensefile = 0;
    my $foundreadmefile = 0;

    my $line = "";
    my $infoline = "";

    # %product Apache OpenOffice Software
    # %version 2.0
    # %description A really great software
    # %copyright 1999-2003 by OOo
    # %vendor Apache OpenOffice project
    # %license /test/replace/01/LICENSE01
    # %readme /test/replace/01/README01
    # %requires foo
    # %provides bar

    # The first language in the languages array determines the language of license and readme file

    my $searchlanguage = ${$languagesref}[0];

    # using the description for the %product line in the epm list file

    my $productnamestring = $onepackage->{'description'};
    installer::packagelist::resolve_packagevariables(\$productnamestring, $variableshashref, 0);
    if ( $variableshashref->{'PRODUCTEXTENSION'} ) { $productnamestring = $productnamestring . " " . $variableshashref->{'PRODUCTEXTENSION'}; }

    $line = "%product" . " " . $productnamestring . "\n";
    push(@epmheader, $line);

    # Determining the release version
    # This release version has to be listed in the line %version : %version versionnumber releasenumber

    # if ( $variableshashref->{'PACKAGEVERSION'} ) { $installer::globals::packageversion = $variableshashref->{'PACKAGEVERSION'}; }
    if ( ! $onepackage->{'packageversion'} ) { installer::exiter::exit_program("ERROR: No packageversion defined for package: $onepackage->{'module'}!", "create_epm_header"); }
    $installer::globals::packageversion = $onepackage->{'packageversion'};
    installer::packagelist::resolve_packagevariables(\$installer::globals::packageversion, $variableshashref, 0);
    if ( $variableshashref->{'PACKAGEREVISION'} ) { $installer::globals::packagerevision = $variableshashref->{'PACKAGEREVISION'}; }

    $line = "%version" . " " . $installer::globals::packageversion . "\n";
    push(@epmheader, $line);

    $line = "%release" . " " . $installer::globals::packagerevision . "\n";
    if ( $installer::globals::islinuxrpmbuild ) { $line = "%release" . " " . $installer::globals::buildid . "\n"; }
    push(@epmheader, $line);

    # Description, Copyright and Vendor are multilingual and are defined in
    # the string file for the header file ($headerfileref)

    my $descriptionstring = $onepackage->{'description'};
    installer::packagelist::resolve_packagevariables(\$descriptionstring, $variableshashref, 0);
    $line = "%description" . " " . $descriptionstring . "\n";
    push(@epmheader, $line);

    my $copyrightstring = $onepackage->{'copyright'};
    installer::packagelist::resolve_packagevariables(\$copyrightstring, $variableshashref, 0);
    $line = "%copyright" . " " . $copyrightstring . "\n";
    push(@epmheader, $line);

    my $vendorstring = $onepackage->{'vendor'};
    installer::packagelist::resolve_packagevariables(\$vendorstring, $variableshashref, 0);
    $line = "%vendor" . " " . $vendorstring . "\n";
    push(@epmheader, $line);

    # License and Readme file can be included automatically from the file list

    if ( $installer::globals::iswindowsbuild || $installer::globals::isos2 )
    {
        $licensefilename = "LICENSE.txt";
        $readmefilename = "readme.txt";
    }
    else
    {
        $licensefilename = "LICENSE";
        $readmefilename = "README";
    }

    if (( $installer::globals::languagepack )   # in language packs the files LICENSE and README are removed, because they are not language specific
        || ( $variableshashref->{'NO_README_IN_ROOTDIR'} ))
    {
        if ( $installer::globals::iswindowsbuild || $installer::globals::isos2 )
        {
            $licensefilename = "LICENSE.txt";
            $readmefilename = "readme_$searchlanguage.txt";
        }
        else
        {
            $licensefilename = "LICENSE";
            $readmefilename = "README_$searchlanguage";
        }
    }

    my $license_in_package_defined = 0;

    if ( $installer::globals::issolarisbuild )
    {
        if ( $onepackage->{'solariscopyright'} )
        {
            $licensefilename = $onepackage->{'solariscopyright'};
            $license_in_package_defined = 1;
        }
    }

    # Process for Linux packages, in which only a very basic license file is
    # included into the package.

    if ( $installer::globals::islinuxbuild )
    {
        if ( $variableshashref->{'COPYRIGHT_INTO_LINUXPACKAGE'} )
        {
            $licensefilename = "linuxcopyrightfile";
            $license_in_package_defined = 1;
        }
    }
    # searching for and readme file

    for ( my $i = 0; $i <= $#{$filesinproduct}; $i++ )
    {
        my $onefile = ${$filesinproduct}[$i];
        my $filename = $onefile->{'Name'};
        if ( $filename eq $readmefilename )
        {
            $foundreadmefile = 1;
            $line = "%readme" . " " . $onefile->{'sourcepath'} . "\n";
            push(@epmheader, $line);
            last;
        }
    }

    # searching for and license file

    if ( $license_in_package_defined )
    {
        my $fileref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$licensefilename, "" , 0);

        if ( $$fileref eq "" ) { installer::exiter::exit_program("ERROR: Could not find license file $licensefilename (A)!", "create_epm_header"); }

        # Special handling to add the content of the file "license_en-US" to the solaris copyrightfile. But not for all products

        if (( $installer::globals::issolarispkgbuild ) && ( ! $variableshashref->{'NO_LICENSE_INTO_COPYRIGHT'} ))
        {
            if ( ! $installer::globals::englishlicenseset ) { installer::worker::set_english_license() }

            # The location for the new file
            my $languagestring = "";
            for ( my $i = 0; $i <= $#{$languagesref}; $i++ ) { $languagestring = $languagestring . "_" . ${$languagesref}[$i]; }
            $languagestring =~ s/^\s*_//;

            my $copyrightdir = installer::systemactions::create_directories("copyright", \$languagestring);

            my $copyrightfile = installer::files::read_file($$fileref);

            # Adding license content to copyright file
            push(@{$copyrightfile}, "\n");
            for ( my $i = 0; $i <= $#{$installer::globals::englishlicense}; $i++ ) { push(@{$copyrightfile}, ${$installer::globals::englishlicense}[$i]); }

            # New destination for $$fileref
            $$fileref = $copyrightdir . $installer::globals::separator . "solariscopyrightfile_" . $onepackage->{'module'};
            if ( -f $$fileref ) { unlink $$fileref; }
            installer::files::save_file($$fileref, $copyrightfile);
        }

        $installer::logger::Lang->printf("Using license file: \"%s\"!\n", $$fileref);

        $foundlicensefile = 1;
        $line = "%license" . " " . $$fileref . "\n";
        push(@epmheader, $line);
    }
    else
    {
        # refer to the license in the matching AOO installation
        # TODO: sync AOO dest license full path with lpacks/sdks/exts
        my $licpath = "openoffice4/program/" . $licensefilename;
        $foundlicensefile = 1;
        $line = "%license " . $licpath . "\n";
        push(@epmheader, $line);
    }

    if (!($foundlicensefile))
    {
        installer::exiter::exit_program("ERROR: Could not find license file $licensefilename (B)", "create_epm_header");
    }

    if (!($foundreadmefile))
    {
        installer::exiter::exit_program("ERROR: Could not find readme file $readmefilename (C)", "create_epm_header");
    }

    # including %replaces

    my $replaces = "";

    if (( $installer::globals::issolarispkgbuild ) && ( ! $installer::globals::patch ))
    {
        $replaces = "solarisreplaces";   # the name in the packagelist
    }
    elsif (( $installer::globals::islinuxbuild ) && ( ! $installer::globals::patch ))
    {
        $replaces = "linuxreplaces";    # the name in the packagelist
    }

    if (( $replaces ) && ( ! $installer::globals::patch ))
    {
        if ( $onepackage->{$replaces} )
        {
            my $replacesstring = $onepackage->{$replaces};

            my $allreplaces = installer::converter::convert_stringlist_into_array(\$replacesstring, ",");

            for ( my $i = 0; $i <= $#{$allreplaces}; $i++ )
            {
                my $onereplaces = ${$allreplaces}[$i];
                $onereplaces =~ s/\s*$//;
                installer::packagelist::resolve_packagevariables(\$onereplaces, $variableshashref, 1);
                if ( $installer::globals::linuxlinkrpmprocess ) { $onereplaces = $onereplaces . "u"; }
                if ( $installer::globals::debian ) { $onereplaces =~ s/_/-/g; } # Debian allows no underline in package name
                $line = "%replaces" . " " . $onereplaces . "\n";
                push(@epmheader, $line);
            }

            if ( $installer::globals::debian && $variableshashref->{'UNIXPRODUCTNAME'} eq 'openoffice' )
            {
                $line = "%provides" . " openoffice.org-unbundled\n";
                push(@epmheader, $line);
                $line = "%replaces" . " openoffice.org-bundled\n";
                push(@epmheader, $line);
            }
        }
    }

    # including the directives for %requires and %provides

    my $provides = "";
    my $requires = "";

    if ( $installer::globals::issolarispkgbuild )
    {
        $provides = "solarisprovides";   # the name in the packagelist
        $requires = "solarisrequires";   # the name in the packagelist
    }
    elsif ( $installer::globals::isfreebsdpkgbuild )
    {
        $provides = "freebsdprovides";   # the name in the packagelist
        $requires = "freebsdrequires";   # the name in the packagelist
    }
    elsif (( $installer::globals::islinuxrpmbuild ) &&
            ( $installer::globals::patch ) &&
            ( exists($onepackage->{'linuxpatchrequires'}) ))
    {
        $provides = "provides";  # the name in the packagelist
        $requires = "linuxpatchrequires";    # the name in the packagelist
    }
    else
    {
        $provides = "provides";         # the name in the packagelist
        $requires = "requires";         # the name in the packagelist
    }

    # if ( $installer::globals::patch )
    # {
    #   $onepackage->{$provides} = "";
        my $isdict = 0;
        if ( $onepackage->{'packagename'} =~ /-dict-/ ) { $isdict = 1;  }

    #   $onepackage->{$requires} = "";
    # }

    if ( $onepackage->{$provides} )
    {
        my $providesstring = $onepackage->{$provides};

        my $allprovides = installer::converter::convert_stringlist_into_array(\$providesstring, ",");

        for ( my $i = 0; $i <= $#{$allprovides}; $i++ )
        {
            my $oneprovides = ${$allprovides}[$i];
            $oneprovides =~ s/\s*$//;
            installer::packagelist::resolve_packagevariables(\$oneprovides, $variableshashref, 1);
            if ( $installer::globals::linuxlinkrpmprocess ) { $oneprovides = $oneprovides . "u"; }
            if ( $installer::globals::debian ) { $oneprovides =~ s/_/-/g; } # Debian allows no underline in package name
            $line = "%provides" . " " . $oneprovides . "\n";
            push(@epmheader, $line);
        }
    }

    if ( $onepackage->{$requires} )
    {
        my $requiresstring = $onepackage->{$requires};

        if ( $installer::globals::add_required_package ) { $requiresstring = $requiresstring . "," . $installer::globals::add_required_package; }

        # The requires string can contain the separator "," in the names (descriptions) of the packages
        # (that are required for Solaris depend files). Therefore "," inside such a description has to
        # masked with a backslash.
        # This masked separator need to be found and replaced, before the stringlist is converted into an array.
        # This replacement has to be turned back after the array is created.

        my $replacementstring = "COMMAREPLACEMENT";
        $requiresstring = installer::converter::replace_masked_separator($requiresstring, ",", "$replacementstring");

        my $allrequires = installer::converter::convert_stringlist_into_array(\$requiresstring, ",");

        installer::converter::resolve_masked_separator($allrequires, ",", $replacementstring);

        for ( my $i = 0; $i <= $#{$allrequires}; $i++ )
        {
            my $onerequires = ${$allrequires}[$i];
            $onerequires =~ s/\s*$//;
            installer::packagelist::resolve_packagevariables2(\$onerequires, $variableshashref, 0, $isdict);
            if ( $installer::globals::debian ) { $onerequires =~ s/_/-/g; } # Debian allows no underline in package name

            # Special handling for Solaris. In depend files, the names of the packages are required, not
            # only the abbreviation. Therefore there is a special syntax for names in packagelist:
            # solarisrequires = "SUNWcar (Name="Package name of SUNWcar"),SUNWkvm (Name="Package name of SUNWcar"), ...
            # if ( $installer::globals::issolarispkgbuild )
            # {
            #   if ( $onerequires =~ /^\s*(.*?)\s+\(\s*Name\s*=\s*\"(.*?)\"\s*\)\s*$/ )
            #   {
            #       $onerequires = $1;
            #       $packagename = $2;
            #       $installer::globals::dependfilenames{$onerequires} = $packagename;
            #   }
            # }

            $line = "%requires" . " " . $onerequires . "\n";
            push(@epmheader, $line);
        }
    }
    else
    {
        if ( $installer::globals::add_required_package )
        {
            my $requiresstring = $installer::globals::add_required_package;

            my $replacementstring = "COMMAREPLACEMENT";
            $requiresstring = installer::converter::replace_masked_separator($requiresstring, ",", "$replacementstring");
            my $allrequires = installer::converter::convert_stringlist_into_array(\$requiresstring, ",");
            installer::converter::resolve_masked_separator($allrequires, ",", $replacementstring);

            for ( my $i = 0; $i <= $#{$allrequires}; $i++ )
            {
                my $onerequires = ${$allrequires}[$i];
                $onerequires =~ s/\s*$//;
                installer::packagelist::resolve_packagevariables(\$onerequires, $variableshashref, 0);
                if ( $installer::globals::debian ) { $onerequires =~ s/_/-/g; } # Debian allows no underline in package name

                # Special handling for Solaris. In depend files, the names of the packages are required, not
                # only the abbreviation. Therefore there is a special syntax for names in packagelist:
                # solarisrequires = "SUNWcar (Name="Package name of SUNWcar"),SUNWkvm (Name="Package name of SUNWcar"), ...
                # if ( $installer::globals::issolarispkgbuild )
                # {
                #   if ( $onerequires =~ /^\s*(.*?)\s+\(\s*Name\s*=\s*\"(.*?)\"\s*\)\s*$/ )
                #   {
                #       $onerequires = $1;
                #       $packagename = $2;
                #       $installer::globals::dependfilenames{$onerequires} = $packagename;
                #   }
                # }

                $line = "%requires" . " " . $onerequires . "\n";
                push(@epmheader, $line);
            }
        }
    }

    return \@epmheader;
}

#######################################
# Adding header to epm file
#######################################

sub adding_header_to_epm_file
{
    my ($epmfileref, $epmheaderref) = @_;

    for ( my $i = 0; $i <= $#{$epmheaderref}; $i++ )
    {
        push( @{$epmfileref}, ${$epmheaderref}[$i] );
    }

    push( @{$epmfileref}, "\n\n" );
}

#####################################################
# Replace one in shell scripts ( ${VARIABLENAME} )
#####################################################

sub replace_variable_in_shellscripts
{
    my ($scriptref, $variable, $searchstring) = @_;

    for ( my $i = 0; $i <= $#{$scriptref}; $i++ )
    {
        ${$scriptref}[$i] =~ s/\$\{$searchstring\}/$variable/g;
    }
}

###################################################
# Replace one in shell scripts ( %VARIABLENAME )
###################################################

sub replace_percent_variable_in_shellscripts
{
    my ($scriptref, $variable, $searchstring) = @_;

    for ( my $i = 0; $i <= $#{$scriptref}; $i++ )
    {
        ${$scriptref}[$i] =~ s/\%$searchstring/$variable/g;
    }
}

################################################
# Replacing many variables in shell scripts
################################################

sub replace_many_variables_in_shellscripts
{
    my ($scriptref, $variableshashref) = @_;

    my $key;

    foreach $key (keys %{$variableshashref})
    {
        my $value = $variableshashref->{$key};
        # $value = lc($value);  # lowercase !
        # if ( $installer::globals::issolarisbuild) { $value =~ s/\.org/org/g; }    # openofficeorg instead of openoffice.org
        replace_variable_in_shellscripts($scriptref, $value, $key);
    }
}

#######################################
# Adding shell scripts to epm file
#######################################

sub adding_shellscripts_to_epm_file
{
    my ($epmfileref, $shellscriptsfilename, $localrootpath, $allvariableshashref, $filesinpackage) = @_;

    # $installer::globals::shellscriptsfilename

    push( @{$epmfileref}, "\n\n" );

    my $shellscriptsfileref = installer::files::read_file($shellscriptsfilename);

    replace_variable_in_shellscripts($shellscriptsfileref, $localrootpath, "rootpath");

    replace_many_variables_in_shellscripts($shellscriptsfileref, $allvariableshashref);

    for ( my $i = 0; $i <= $#{$shellscriptsfileref}; $i++ )
    {
        push( @{$epmfileref}, ${$shellscriptsfileref}[$i] );
    }

    push( @{$epmfileref}, "\n" );
}

#################################################
# Determining the epm on the system
#################################################

sub find_epm_on_system
{
    my ($includepatharrayref) = @_;

    installer::logger::include_header_into_logfile("Check epm on system");

    my $epmname = "epm";

    # epm should be defined through the configure script but we need to
    # check for it to be defined because of the Sun environment.
    # Check the environment variable first and if it is not defined,
    # or if it is but the location is not executable, search further.
    # It has to be found in the solver or it has to be in the path
    # (saved in $installer::globals::epm_in_path) or we get the specified
    # one through the environment (i.e. when --with-epm=... is specified)

    if ($ENV{'EPM'})
    {
        if (($ENV{'EPM'} ne "") && (-x "$ENV{'EPM'}"))
        {
            $epmname = $ENV{'EPM'};
        }
        elsif ( ($ENV{'EPM'} eq "no") || ($ENV{'EPM'} eq "internal") )
        {
            $epmname = "epm";
            my $epmref = installer::scriptitems::get_sourcepath_from_filename_and_includepath( \$epmname, $includepatharrayref, 0);
            if ($$epmref eq "") { installer::exiter::exit_program("ERROR: Could not find program $epmname (EPM set to \"internal\" or \"no\")!", "find_epm_on_system"); }
            $epmname = $$epmref;
        }
        else
        {
            installer::exiter::exit_program("Environment variable EPM set (\"$ENV{'EPM'}\"), but file does not exist or is not executable!", "find_epm_on_system");
        }
    }
    else
    {
        my $epmfileref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$epmname, $includepatharrayref, 0);

        if (($$epmfileref eq "") && (!($installer::globals::epm_in_path))) { installer::exiter::exit_program("ERROR: Could not find program $epmname!", "find_epm_on_system"); }
        if (($$epmfileref eq "") && ($installer::globals::epm_in_path)) { $epmname = $installer::globals::epm_path; }
        if (!($$epmfileref eq "")) { $epmname = $$epmfileref; }
    }

    $installer::logger::Lang->printf("Using epmfile: %s\n", $epmname);

    return $epmname;
}

#################################################
# Determining the epm patch state
# saved in $installer::globals::is_special_epm
# NOTE: W/ EPM 5.0.0 and later, it is ALWAYS special
#################################################

sub set_patch_state
{
    my ($epmexecutable) = @_;

    my $infoline = "";

    my $systemcall = "$epmexecutable |";
    open (EPMPATCH, "$systemcall");

    while (<EPMPATCH>)
    {
        chop;
        if ( $_ =~ /Patched for .*OpenOffice/ ) { $installer::globals::is_special_epm = 1; last; }
        if ( $_ =~ /Apache OpenOffice compatible/ ) { $installer::globals::is_special_epm = 1; last; }
    }

    close (EPMPATCH);

    if ( $installer::globals::is_special_epm )
    {
        $installer::logger::Lang->print("\n");
        $installer::logger::Lang->print("Patch state: This is a patched version of epm!\n");
        $installer::logger::Lang->print("\n");
    }
    else
    {
        $installer::logger::Lang->print("\n");
        $installer::logger::Lang->print("Patch state: This is an unpatched version of epm!\n");
        $installer::logger::Lang->print("\n");
    }

    if ( ( $installer::globals::is_special_epm ) && (($installer::globals::islinuxrpmbuild) || ($installer::globals::issolarispkgbuild)) )
    {
        # Special postprocess handling only for Linux RPM and Solaris packages
        $installer::globals::postprocess_specialepm = 1;
        $installer::globals::postprocess_standardepm = 0;
    }
    else
    {
        $installer::globals::postprocess_specialepm = 0;
        $installer::globals::postprocess_standardepm = 1;
    }
}

#################################################
# LD_PRELOAD string for Debian packages
#################################################

sub get_ld_preload_string
{
    return $ENV{'FAKEROOT'};
}

#################################################
# Calling epm to create the installation sets
#################################################

sub call_epm
{
    my ($epmname, $epmlistfilename, $packagename, $includepatharrayref) = @_;

    installer::logger::include_header_into_logfile("epm call for $packagename");

    my $packageformat = $installer::globals::packageformat;

    my $localpackagename = $packagename;
    # Debian allows only lowercase letters in package name
    if ( $installer::globals::debian ) { $localpackagename = lc($localpackagename); }

    my $outdirstring = "";
    if ( $installer::globals::epmoutpath ne "" ) { $outdirstring = " --output-dir $installer::globals::epmoutpath"; }

    # Debian package build needs fakeroot which we check for at configure time
    # NOTE: EPM 5.0.0 or later also uses fakeroot w/ dpkg if available

    my $ldpreloadstring = "";

    if ( $installer::globals::debian ) { $ldpreloadstring = get_ld_preload_string() . " "; }

    my $extraflags = "";
    if ($ENV{'EPM_FLAGS'}) { $extraflags = $ENV{'EPM_FLAGS'}; }

    my $verboseflag = "-v";
    if ( ! $installer::globals::quiet ) { $verboseflag = "-v2"; };

    my $systemcall = $ldpreloadstring . $epmname . " -f " . $packageformat . " " . $extraflags . " " . $localpackagename . " " . $epmlistfilename . $outdirstring . " " . $verboseflag . " " . " 2\>\&1 |";

    $installer::logger::Info->printf("... %s ...\n", $systemcall);

    my $maxepmcalls = 3;

    for ( my $i = 1; $i <= $maxepmcalls; $i++ )
    {
        my @epmoutput = ();

        open (EPM, "$systemcall");
        while (<EPM>) {push(@epmoutput, $_); }
        close (EPM);

        my $returnvalue = $?;   # $? contains the return value of the systemcall

        $installer::logger::Lang->printf("Systemcall  (Try %d): \n", $i, $systemcall);

        for ( my $j = 0; $j <= $#epmoutput; $j++ )
        {
            if ( $i < $maxepmcalls ) { $epmoutput[$j] =~ s/\bERROR\b/PROBLEM/ig; }
            $installer::logger::Lang->print($epmoutput[$j]);
        }

        if ($returnvalue)
        {
            $installer::logger::Lang->printf("Try %d : Could not execute \"%s\"!\n", $i, $systemcall);
            if ( $i == $maxepmcalls ) { installer::exiter::exit_program("ERROR: \"$systemcall\"!", "call_epm"); }
        }
        else
        {
            $installer::logger::Info->printf("Success: Executed (Try %d): \"%s\" successfully\n", $i, $systemcall);
            $installer::logger::Lang->printf("Success: Executed (Try %d): \"%s\" successfully\n", $i, $systemcall);
            last;
        }
    }
}

#####################################################################
# Adding the new line for relocatables into pkginfo file (Solaris)
# or spec file (Linux) created by epm
#####################################################################

sub add_one_line_into_file
{
    my ($file, $insertline, $filename) = @_;

    if ( $installer::globals::issolarispkgbuild )
    {
        push(@{$file}, $insertline);        # simply adding at the end of pkginfo file
    }

    if ( $installer::globals::islinuxrpmbuild )
    {
        # Adding behind the line beginning with: Group:

        my $inserted_line = 0;

        for ( my $i = 0; $i <= $#{$file}; $i++ )
        {
            if ( ${$file}[$i] =~ /^\s*Group\:\s*/ )
            {
                splice(@{$file},$i+1,0,$insertline);
                $inserted_line = 1;
                last;
            }
        }

        if (! $inserted_line) { installer::exiter::exit_program("ERROR: Did not find string \"Group:\" in file: $filename", "add_one_line_into_file"); }
    }

    $insertline =~ s/\s*$//;    # removing line end for correct logging
    $installer::logger::Lang->printf("Success: Added line %s into file !\n", $insertline, $filename);
}

#####################################################################
# Setting the revision VERSION=1.9,REV=66  .
# Also adding the new line: "AutoReqProv: no"
#####################################################################

sub set_revision_in_pkginfo
{
    my ($file, $filename, $variables, $packagename) = @_;

    my $revisionstring = "\,REV\=" . $installer::globals::packagerevision;

    # Adding also a time string to the revision. Syntax: VERSION=8.0.0,REV=66.2005.01.24

    my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);

    $mday = $mday;
    $mon = $mon + 1;
    $year = $year + 1900;

    if ( $mday < 10 ) { $mday = "0" . $mday; }
    if ( $mon < 10 ) { $mon = "0" . $mon; }
    $datestring = $year . "." . $mon . "." . $mday;
    $revisionstring = $revisionstring . "." . $datestring;

    for ( my $i = 0; $i <= $#{$file}; $i++ )
    {
        if ( ${$file}[$i] =~ /^\s*(VERSION\=.*?)\s*$/ )
        {
            my $oldstring = $1;
            my $newstring = $oldstring . $revisionstring;   # also adding the date string
            ${$file}[$i] =~ s/$oldstring/$newstring/;
            $installer::logger::Lang->printf("Info: Changed in %s file: \"%s\" to \"\"!\n",
                $filename,
                $oldstring,
                $newstring);
            last;
        }
    }

    # For Update and Patch reasons, this string can also be kept constant

    my $pkgversion = "SOLSPARCPKGVERSION";
    if ( $installer::globals::issolarisx86build ) { $pkgversion = "SOLIAPKGVERSION"; }

    if (( $variables->{$pkgversion} ) && ( $variables->{$pkgversion} ne "" ))
    {
        if ( $variables->{$pkgversion} ne "FINALVERSION" )
        {
            # In OOo 3.x timeframe, this string is no longer unique for all packages, because of the three layer.
            # In the string: "3.0.0,REV=9.2008.09.30" only the part "REV=9.2008.09.30" can be unique for all packages
            # and therefore be set as $pkgversion.
            # The first part "3.0.0" has to be derived from the

            my $version = $installer::globals::packageversion;
            if ( $version =~ /^\s*(\d+)\.(\d+)\.(\d+)\s*$/ )
            {
                my $major = $1;
                my $minor = $2;
                my $micro = $3;

                my $finalmajor = $major;
                my $finalminor = $minor;
                my $finalmicro = 0;

                # if (( $packagename =~ /-ure\s*$/ ) && ( $finalmajor == 1 )) { $finalminor = 4; }

                $version = "$finalmajor.$finalminor.$finalmicro";
            }

            my $datestring = $variables->{$pkgversion};

            # Allowing some packages to have another date of creation.
            # They can be defined in product definition using a key like "SOLSPARCPKGVERSION_$packagename"

            my $additionalkey = $pkgversion . "_" . $packagename;
            if (( $variables->{$additionalkey} ) && ( $variables->{$additionalkey} ne "" )) { $datestring = $variables->{$additionalkey}; }

            my $versionstring = "$version,$datestring";

            for ( my $i = 0; $i <= $#{$file}; $i++ )
            {
                if ( ${$file}[$i] =~ /^\s*(VERSION\=).*?\s*$/ )
                {
                    my $start = $1;
                    my $newstring = $start . $versionstring . "\n"; # setting the complete new string
                    my $oldstring = ${$file}[$i];
                    ${$file}[$i] = $newstring;
                    $oldstring =~ s/\s*$//;
                    $newstring =~ s/\s*$//;
                    $installer::logger::Lang->printf("Info: Changed in %s file: \"%s\" to \"\"!\n", $filename, $oldstring, $newstring);
                    last;
                }
            }
        }
    }
}

########################################################
# Setting Patch information for Respin versions
# into pkginfo file. This prevents Respin versions
# from patching.
########################################################

sub set_patchlist_in_pkginfo_for_respin
{
    my ($changefile, $filename, $allvariables, $packagename) = @_;

    my $patchlistname = "SOLSPARCPATCHLISTFORRESPIN";
    if ( $installer::globals::issolarisx86build ) { $patchlistname = "SOLIAPATCHLISTFORRESPIN"; }

    if ( $allvariables->{$patchlistname} )
    {
        # patchlist separator is a blank
        my $allpatchesstring = $allvariables->{$patchlistname};
        my @usedpatches = ();

        # Analyzing the patchlist
        # Syntax: 120186-10 126411-01(+core-01) -> use 126411-01 only for core-01
        # Syntax: 120186-10 126411-01(-core-01) -> use 126411-01 for all packages except for core-01
        my $allpatches = installer::converter::convert_whitespace_stringlist_into_array(\$allpatchesstring);

        for ( my $i = 0; $i <= $#{$allpatches}; $i++ )
        {
            my $patchdefinition = ${$allpatches}[$i];

            my $patchid = "";
            my $symbol = "";
            my $constraint = "";
            my $isusedpatch = 0;

            if ( $patchdefinition =~ /^\s*(.+)\(([+-])(.+)\)\s*$/ )
            {
                $patchid = $1;
                $symbol = $2;
                $constraint = $3;
            }
            elsif (( $patchdefinition =~ /\(/ ) || ( $patchdefinition =~ /\)/ ))    # small syntax check
            {
                # if there is a bracket in the $patchdefinition, but it does not
                # match the if-condition, this is an erroneous definition.
                installer::exiter::exit_program("ERROR: Unknown patch string: $patchdefinition", "set_patchlist_in_pkginfo_for_respin");
            }
            else
            {
                $patchid = $patchdefinition;
                $isusedpatch = 1; # patches without constraint are always included
            }

            if ( $symbol ne "" )
            {
                if ( $symbol eq "+" )
                {
                    if ( $packagename =~ /^.*\Q$constraint\E\s*$/ ) { $isusedpatch = 1; }
                }

                if ( $symbol eq "-" )
                {
                    if ( ! ( $packagename =~ /^.*\Q$constraint\E\s*$/ )) { $isusedpatch = 1; }
                }
            }

            if ( $isusedpatch ) { push(@usedpatches, $patchid); }
        }

        if ( $#usedpatches > -1 )
        {
            my $patchstring = installer::converter::convert_array_to_space_separated_string(\@usedpatches);

            my $newline = "PATCHLIST=" . $patchstring . "\n";
            add_one_line_into_file($changefile, $newline, $filename);

            # Adding patch info for each used patch in the patchlist

            for ( my $i = 0; $i <= $#usedpatches; $i++ )
            {
                my $patchid = $usedpatches[$i];
                my $key = "PATCH_INFO_" . $patchid;
                $key =~ s/\s*$//;

                if ( ! $allvariables->{$key} ) { installer::exiter::exit_program("ERROR: No Patch info available in zip list file for $key", "set_patchlist_in_pkginfo"); }
                my $value = set_timestamp_in_patchinfo($allvariables->{$key});
                $newline = $key . "=" . $value . "\n";

                add_one_line_into_file($changefile, $newline, $filename);
            }
        }
    }
}

########################################################
# Solaris requires, that the time of patch installation
# must not be empty.
# Format: Mon Mar 24 11:20:56 PDT 2008
# Log file: Tue Apr 29 23:26:19 2008 (04:31 min.)
# Replace string: ${TIMESTAMP}
########################################################

sub set_timestamp_in_patchinfo
{
    my ($value) = @_;

    my $currenttime = localtime();

    if ( $currenttime =~ /^\s*(.+?)(\d\d\d\d)\s*$/ )
    {
        my $start = $1;
        my $year = $2;
        $currenttime = $start . "CET " . $year;
    }

    $value =~ s/\$\{TIMESTAMP\}/$currenttime/;

    return $value;
}

########################################################
# Setting MAXINST=1000 into the pkginfo file.
########################################################

sub set_maxinst_in_pkginfo
{
    my ($changefile, $filename) = @_;

    my $newline = "MAXINST\=1000\n";

    add_one_line_into_file($changefile, $newline, $filename);
}

#############################################################
# Setting several Solaris variables into the pkginfo file.
#############################################################

sub set_solaris_parameter_in_pkginfo
{
    my ($changefile, $filename, $allvariables) = @_;

    my $newline = "";

    # SUNW_PRODNAME
    # SUNW_PRODVERS
    # SUNW_PKGVERS
    # Not: SUNW_PKGTYPE
    # HOTLINE
    # EMAIL

    my $productname = $allvariables->{'PRODUCTNAME'};
    $newline = "SUNW_PRODNAME=$productname\n";
    add_one_line_into_file($changefile, $newline, $filename);

    my $productversion = "";
    if ( $allvariables->{'PRODUCTVERSION'} )
    {
        $productversion = $allvariables->{'PRODUCTVERSION'};
        if ( $allvariables->{'PRODUCTEXTENSION'} ) { $productversion = $productversion . "/" . $allvariables->{'PRODUCTEXTENSION'}; }
    }
    $newline = "SUNW_PRODVERS=$productversion\n";
    add_one_line_into_file($changefile, $newline, $filename);

    $newline = "SUNW_PKGVERS=1\.0\n";
    add_one_line_into_file($changefile, $newline, $filename);

    if ( $allvariables->{'SUNW_PKGTYPE'} )
    {
        $newline = "SUNW_PKGTYPE=$allvariables->{'SUNW_PKGTYPE'}\n";
        add_one_line_into_file($changefile, $newline, $filename);
    }
    else
    {
        $newline = "SUNW_PKGTYPE=\n";
        add_one_line_into_file($changefile, $newline, $filename);
    }

    $newline = "HOTLINE=Please contact your local service provider\n";
    add_one_line_into_file($changefile, $newline, $filename);

    $newline = "EMAIL=\n";
    add_one_line_into_file($changefile, $newline, $filename);

}

#####################################################################
# epm uses as archtecture for Solaris x86 "i86pc". This has to be
# changed to "i386".
#####################################################################

sub fix_architecture_setting
{
    my ($changefile) = @_;

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*ARCH=i86pc\s*$/ )
        {
            ${$changefile}[$i] =~ s/i86pc/i386/;
            last;
        }

    }
}

#####################################################################
# Adding a new line for topdir into specfile, removing old
# topdir if set.
#####################################################################

sub set_topdir_in_specfile
{
    my ($changefile, $filename, $newepmdir) = @_;

    # $newepmdir =~ s/^\s*\.//; # removing leading "."
    $newepmdir = cwd() . $installer::globals::separator . $newepmdir; # only absolute path allowed

    # removing "%define _topdir", if existing

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*\%define _topdir\s+/ )
        {
            my $removeline = ${$changefile}[$i];
            $removeline =~ s/\s*$//;
            splice(@{$changefile},$i,1);
            $installer::logger::Lang->printf("Info: Removed line \"%s\" from file %s!\n", $removeline, $filename);
            last;
        }
    }

    # Adding "topdir" behind the line beginning with: Group:

    my $inserted_line = 0;

    my $topdirline = "\%define _topdir $newepmdir\n";

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*Group\:\s*/ )
        {
            splice(@{$changefile},$i+1,0,$topdirline);
            $inserted_line = 1;
            $topdirline =~ s/\s*$//;
            $installer::logger::Lang->printf("Success: Added line %s into file %s!\n", $topdirline, $filename);
        }
    }

    if (! $inserted_line) { installer::exiter::exit_program("ERROR: Did not find string \"Group:\" in file: $filename", "set_topdir_in_specfile"); }

}

#####################################################################
# Setting the packager in the spec file
# Syntax: Packager: abc@def
#####################################################################

sub set_packager_in_specfile
{
    my ($changefile) = @_;

    my $packager = $installer::globals::longmanufacturer;

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*Packager\s*:\s*(.+?)\s*$/ )
        {
            my $oldstring = $1;
            ${$changefile}[$i] =~ s/\Q$oldstring\E/$packager/;
            $installer::logger::Lang->printf("Info: Changed Packager in spec file from %s to %s!\n",
                $oldstring,
                $packager);
            last;
        }
    }
}

#####################################################################
# Setting the requirements in the spec file (i81494)
# Syntax: PreReq: "requirements" (only for shared extensions)
#####################################################################

sub set_prereq_in_specfile
{
    my ($changefile) = @_;

    my $prereq = "PreReq:";

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*Requires:\s*(.+?)\s*$/ )
        {
            my $oldstring = ${$changefile}[$i];
            ${$changefile}[$i] =~ s/Requires:/$prereq/;
            $installer::logger::Lang->printf("Info: Changed requirements in spec file from %s to %s!\n",
                $oldstring,
                ${$changefile}[$i]);
        }
    }
}

#####################################################################
# Setting the Auto[Req]Prov line and __find_requires
#####################################################################

sub set_autoprovreq_in_specfile
{
    my ($changefile, $findrequires, $bindir) = @_;

    my $autoreqprovline;

    if ( $findrequires )
    {
        $autoreqprovline = "AutoProv\: no\n%define __find_requires $bindir/$findrequires\n";
    }
    else
    {
        $autoreqprovline = "AutoReqProv\: no\n";
    }

    $autoreqprovline .= "%define _binary_filedigest_algorithm 1\n%define _binary_payload w9.gzdio\n";

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        # Adding "autoreqprov" behind the line beginning with: Group:
        if ( ${$changefile}[$i] =~ /^\s*Group\:\s*/ )
        {
            splice(@{$changefile},$i+1,0,$autoreqprovline);
            $autoreqprovline =~ s/\s*$//;
            $installer::logger::Lang->printf("Success: Added line %s into spec file!\n", $autoreqprovline);
            last;
        }
    }
}

#####################################################################
# Replacing Copyright with License in the spec file
# Syntax: License: ALv2 (older usages were LGPL, SISSL)
#####################################################################

sub set_license_in_specfile
{
    my ($changefile, $variableshashref) = @_;

    my $license = $variableshashref->{'LICENSENAME'};

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*Copyright\s*:\s*(.+?)\s*$/ )
        {
            ${$changefile}[$i] = "License: $license\n";
            $installer::logger::Lang->printf("Info: Replaced Copyright with License: %s !\n", $license);
            last;
        }
    }
}

#########################################################
# Building relocatable Solaris packages means:
# 1. Add "BASEDIR=/opt" into pkginfo
# 2. Remove "/opt/" from all objects in prototype file
# For step2 this function exists
# Sample: d none /opt/openofficeorg20/help 0755 root other
# -> d none openofficeorg20/help 0755 root other
#########################################################

sub make_prototypefile_relocatable
{
    my ($prototypefile, $relocatablepath) = @_;

    for ( my $i = 0; $i <= $#{$prototypefile}; $i++ )
    {
        if ( ${$prototypefile}[$i] =~ /^\s*\w\s+\w+\s+\/\w+/ )  # this is an object line
        {
            ${$prototypefile}[$i] =~ s/$relocatablepath//;  # Important: $relocatablepath has a "/" at the end. Example "/opt/"
        }
    }

    # If the $relocatablepath is "/opt/openoffice20/" the line "d none /opt/openoffice20" was not changed.
    # This line has to be removed now

    if ( $relocatablepath ne "/" ) { $relocatablepath =~ s/\/\s*$//; }      # removing the ending slash

    for ( my $i = 0; $i <= $#{$prototypefile}; $i++ )
    {
        if ( ${$prototypefile}[$i] =~ /^\s*d\s+\w+\s+\Q$relocatablepath\E/ )
        {
            my $line = ${$prototypefile}[$i];
            splice(@{$prototypefile},$i,1); # removing the line
            $line =~ s/\s*$//;
            $installer::logger::Lang->printf("Info: Removed line \"%s\" from prototype file!\n", $line);
            last;
        }
    }

    # Making "\$" to "$" in prototype file. "\$" was created by epm.

    for ( my $i = 0; $i <= $#{$prototypefile}; $i++ )
    {
        if ( ${$prototypefile}[$i] =~ /\\\$/ )
        {
            ${$prototypefile}[$i] =~ s/\\\$/\$/g;
            $installer::logger::Lang->printf("Info: Changed line in prototype file: %s !\n", ${$prototypefile}[$i]);
        }
    }
}


#########################################################################
# In scp the flag VOLATEFILE can be used. This shall lead to style "v"
# in Solaris prototype file. This is not supported by epm and has
# therefore to be included in prototypefile, not in epm list file.
#########################################################################

sub set_volatilefile_into_prototypefile
{
    my ($prototypefile, $filesref) = @_;

    for ( my $i = 0; $i <= $#{$filesref}; $i++ )
    {
        my $onefile = ${$filesref}[$i];

        my $styles = "";
        if ( $onefile->{'Styles'} ) { $styles = $onefile->{'Styles'}; }

        if ( $styles =~ /\bVOLATILEFILE\b/ )
        {
            my $sourcepath = $onefile->{'sourcepath'};

            for ( my $j = 0; $j <= $#{$prototypefile}; $j++ )
            {
                if (( ${$prototypefile}[$j] =~ /^\s*f\s+none\s+/ ) && ( ${$prototypefile}[$j] =~ /\=\Q$sourcepath\E\s+/ ))
                {
                    my $oldline = ${$prototypefile}[$j];
                    ${$prototypefile}[$j] =~ s/^\s*f/v/;
                    my $newline = ${$prototypefile}[$j];
                    $oldline =~ s/\s*$//;
                    $newline =~ s/\s*$//;
                    $installer::logger::Lang->printf(
                        "Volatile file: Changing content from \"%s\" to \"%s\" .\n",
                        $oldline,
                        $newline);
                    last;
                }
            }
        }
    }
}

#########################################################################
# Replacing the variables in the Solaris patch shell scripts.
# Taking care, that multiple slashes are not always removed.
#########################################################################

sub replace_variables_in_shellscripts_for_patch
{
    my ($scriptfile, $scriptfilename, $oldstring, $newstring) = @_;

    for ( my $i = 0; $i <= $#{$scriptfile}; $i++ )
    {
        if ( ${$scriptfile}[$i] =~ /\Q$oldstring\E/ )
        {
            my $oldline = ${$scriptfile}[$i];
            if (( $oldstring eq "PRODUCTDIRECTORYNAME" ) && ( $newstring eq "" )) { $oldstring = $oldstring . "/"; }
            ${$scriptfile}[$i] =~ s/\Q$oldstring\E/$newstring/g;
            $installer::logger::Lang->printf("Info: Substituting in %s %s by %s\n",
                $scriptfilename, $oldstring, $newstring);
        }
    }
}

#########################################################################
# Replacing the variables in the shell scripts or in the epm list file
# Linux: spec file
# Solaris: preinstall, postinstall, preremove, postremove
# If epm is used in the original version (not relocatable)
# the variables have to be exchanged in the list file,
# created for epm.
#########################################################################

sub replace_variables_in_shellscripts
{
    my ($scriptfile, $scriptfilename, $oldstring, $newstring) = @_;

    my $debug = 0;
    if ( $oldstring eq "PRODUCTDIRECTORYNAME" ) { $debug = 1; }

    for ( my $i = 0; $i <= $#{$scriptfile}; $i++ )
    {
        if ( ${$scriptfile}[$i] =~ /\Q$oldstring\E/ )
        {
            my $oldline = ${$scriptfile}[$i];
            ${$scriptfile}[$i] =~ s/\Q$oldstring\E/$newstring/g;
            ${$scriptfile}[$i] =~ s/\/\//\//g;  # replacing "//" by "/" , if path $newstring is empty!
            $installer::logger::Lang->printf("Info: Substituting in %s %s by %s\n",
                $scriptfilename,
                $oldstring,
                $newstring);
            if ( $debug )
            {
                $installer::logger::Lang->printf("Old Line: %s", $oldline);
                $installer::logger::Lang->printf("New Line: %s", ${$scriptfile}[$i]);
            }
        }
    }
}

############################################################
# Determinig the directory created by epm, in which the
# RPMS or Solaris packages are created.
############################################################

sub determine_installdir_ooo
{
    # A simple "ls" command returns the directory name

    my $dirname = "";

    my $systemcall = "ls |";
    open (LS, "$systemcall");
    $dirname = <LS>;
    close (LS);

    $dirname =~ s/\s*$//;

    $installer::logger::Lang->printf("Info: Directory created by epm: %s\n", $dirname);

    return $dirname;
}

############################################################
# Setting the tab content into the file container
############################################################

sub set_tab_into_datafile
{
    my ($changefile, $filesref) = @_;

    my @newclasses = ();
    my $newclassesstring = "";

    if ( $installer::globals::issolarispkgbuild )
    {
        for ( my $i = 0; $i <= $#{$filesref}; $i++ )
        {
            my $onefile = ${$filesref}[$i];

            if ( $onefile->{'SolarisClass'} )
            {
                my $sourcepath = $onefile->{'sourcepath'};

                for ( my $j = 0; $j <= $#{$changefile}; $j++ )
                {
                    if (( ${$changefile}[$j] =~ /^\s*f\s+none\s+/ ) && ( ${$changefile}[$j] =~ /\=\Q$sourcepath\E\s+/ ))
                    {
                        my $oldline = ${$changefile}[$j];
                        ${$changefile}[$j] =~ s/f\s+none/e $onefile->{'SolarisClass'}/;
                        my $newline = ${$changefile}[$j];
                        $oldline =~ s/\s*$//;
                        $newline =~ s/\s*$//;

                        $installer::logger::Lang->printf("TAB: Changing content from \"%s\" to \"%s\" .\n",
                            $oldline, $newline);

                        # collecting all new classes
                        if (! installer::existence::exists_in_array($onefile->{'SolarisClass'}, \@newclasses))
                        {
                            push(@newclasses, $onefile->{'SolarisClass'});
                        }

                        last;
                    }
                }
            }
        }

        $newclassesstring = installer::converter::convert_array_to_space_separated_string(\@newclasses);
    }

    if ( $installer::globals::islinuxrpmbuild )
    {
        for ( my $i = 0; $i <= $#{$filesref}; $i++ )
        {
            my $onefile = ${$filesref}[$i];

            if ( $onefile->{'SpecFileContent'} )
            {
                my $destination = $onefile->{'destination'};

                for ( my $j = 0; $j <= $#{$changefile}; $j++ )
                {
                    if ( ${$changefile}[$j] =~ /^\s*(\%attr\(.*\))\s+(\".*?\Q$destination\E\"\s*)$/ )
                    {
                        my $begin = $1;
                        my $end = $2;

                        my $oldline = ${$changefile}[$j];
                        ${$changefile}[$j] = $begin . " " . $onefile->{'SpecFileContent'} . " " . $end;
                        my $newline = ${$changefile}[$j];

                        $oldline =~ s/\s*$//;
                        $newline =~ s/\s*$//;

                        $installer::logger::Lang->printf(
                            "TAB: Changing content from \"%s\" to \"%s\" .\n", $oldline, $newline);

                        last;
                    }
                }
            }
        }
    }

    return $newclassesstring;
}

############################################################
# Including additional classes into the pkginfo file
############################################################

sub include_classes_into_pkginfo
{
    my ($changefile, $classesstring) = @_;

    for ( my $i = 0; $i <= $#{$changefile}; $i++ )
    {
        if ( ${$changefile}[$i] =~ /^\s*CLASSES\=none/ )
        {
            ${$changefile}[$i] =~ s/\s*$//;
            my $oldline = ${$changefile}[$i];
            ${$changefile}[$i] = ${$changefile}[$i] . " " . $classesstring . "\n";
            my $newline = ${$changefile}[$i];
            $newline =~ s/\s*$//;

            $installer::logger::Lang->printf("pkginfo file: Changing content from \"%s\" to \"%s\" .\n",
                $oldline, $newline);
        }
    }
}

##########################################################################################
# Checking, if an extension is included into the package (Linux).
# All extension files have to be installed into directory
# share/extension/install
# %attr(0444,root,root) "/opt/staroffice8/share/extension/install/SunSearchToolbar.oxt"
##########################################################################################

sub is_extension_package
{
    my ($specfile) = @_;

    my $is_extension_package = 0;

    for ( my $i = 0; $i <= $#{$specfile}; $i++ )
    {
        my $line = ${$specfile}[$i];
        if ( $line =~ /share\/extension\/install\/.*?\.oxt\"\s*$/ )
        {
            $is_extension_package = 1;
            last;
        }
    }

    return $is_extension_package;
}

######################################################################
# Checking, if an extension is included into the package (Solaris).
# All extension files have to be installed into directory
# share/extension/install
######################################################################

sub contains_extension_dir
{
    my ($prototypefile) = @_;

    my $contains_extension_dir = 0;

    # d none opt/openoffice.org3/share/extensions/

    for ( my $i = 0; $i <= $#{$prototypefile}; $i++ )
    {
        my $line = ${$prototypefile}[$i];
        if ( $line =~ /^\s*d\s+none\s.*\/share\/extensions\// )
        {
            $contains_extension_dir = 1;
            last;
        }
    }

    return $contains_extension_dir;
}

############################################################
# A Solaris patch contains 7 specific scripts
############################################################

sub add_scripts_into_prototypefile
{
    my ($prototypefile, $prototypefilename, $languagestringref, $staticpath) = @_;

    # The files are stored in the directory $installer::globals::patchincludepath
    # The file names are available via @installer::globals::solarispatchscripts

    my $path = $installer::globals::patchincludepath;
    $path =~ s/\/\s*$//;
    $path = $path . $installer::globals::separator;

    my @newlines = ();
    my $is_extension_package = contains_extension_dir($prototypefile);

    if ( $is_extension_package )
    {
        for ( my $i = 0; $i <= $#installer::globals::solarispatchscriptsforextensions; $i++ )
        {
            my $sourcefilename = $path . $installer::globals::solarispatchscriptsforextensions[$i];
            my $destfile = $installer::globals::solarispatchscriptsforextensions[$i];

            # If the sourcepath has "_extension" in its name, this has to be removed
            $destfile =~ s/_extensions\s*$//;  # hard coded renaming of script name

            # Creating unique directory name with $prototypefilename
            my $extensiondir = installer::systemactions::create_directories("extensionscripts", $languagestringref);

            if ( $prototypefilename =~ /\/(\S*?)\s*$/ ) { $prototypefilename = $1; }
            $prototypefilename =~ s/\./_/g;
            my $destdir = $extensiondir . $installer::globals::separator . $prototypefilename;
            if ( ! -d $destdir ) { installer::systemactions::create_directory($destdir); }
            my $destpath = $destdir . $installer::globals::separator . $destfile;
            if ( -f $destpath ) { unlink($destpath); }

            # Reading file
            my $scriptfile = installer::files::read_file($sourcefilename);

            # Replacing variables
            my $oldstring = "PRODUCTDIRECTORYNAME";
            replace_variables_in_shellscripts_for_patch($scriptfile, $destpath, $oldstring, $staticpath);

            # Saving file
            installer::files::save_file($destpath, $scriptfile);

            # Writing file destination into prototype file
            my $line = "i $destfile=" . $destpath . "\n";
            push(@newlines, $line);
        }
    }
    else
    {
        for ( my $i = 0; $i <= $#installer::globals::solarispatchscripts; $i++ )
        {
            my $line = "i $installer::globals::solarispatchscripts[$i]=" . $path . $installer::globals::solarispatchscripts[$i] . "\n";
            push(@newlines, $line);
        }
    }

    # Including the new lines after the last line starting with "i"

    for ( my $i = 0; $i <= $#{$prototypefile}; $i++ )
    {
        if ( ${$prototypefile}[$i] =~ /^\s*i\s+copyright/ )
        {
            splice(@{$prototypefile}, $i, 1);   # ignoring old copyright text, using patch standard
            next;
        }
        if ( ${$prototypefile}[$i] =~ /^\s*i\s+/ ) { next; }
        splice(@{$prototypefile}, $i, 0, @newlines);
        last;
    }
}

############################################################
# Adding patch infos in pkginfo file
############################################################

sub include_patchinfos_into_pkginfo
{
    my ( $changefile, $filename, $variableshashref ) = @_;

    # SUNW_PATCHID=101998-10
    # SUNW_OBSOLETES=114999-01 113999-01
    # SUNW_PKGTYPE=usr
    # SUNW_PKGVERS=1.0
    # SUNW_REQUIRES=126411-01

    my $patchidname = "SOLSPARCPATCHID";
    if ( $installer::globals::issolarisx86build ) { $patchidname = "SOLIAPATCHID"; }

    if ( ! $variableshashref->{$patchidname} ) { installer::exiter::exit_program("ERROR: Variable $patchidname not defined in zip list file!", "include_patchinfos_into_pkginfo"); }

    my $newline = "SUNW_PATCHID=" . $variableshashref->{$patchidname} . "\n";
    add_one_line_into_file($changefile, $newline, $filename);

    my $patchobsoletesname = "SOLSPARCPATCHOBSOLETES";
    if ( $installer::globals::issolarisx86build ) { $patchobsoletesname = "SOLIAPATCHOBSOLETES"; }

    my $obsoletes = "";
    if ( $variableshashref->{$patchobsoletesname} ) { $obsoletes = $variableshashref->{$patchobsoletesname}; }
    $newline = "SUNW_OBSOLETES=" . $obsoletes . "\n";
    add_one_line_into_file($changefile, $newline, $filename);

    my $patchrequiresname = "SOLSPARCPATCHREQUIRES";
    if ( $installer::globals::issolarisx86build ) { $patchrequiresname = "SOLIAPATCHREQUIRES"; }

    if ( $variableshashref->{$patchrequiresname} )
    {
        my $requires = $variableshashref->{$patchrequiresname};
        $newline = "SUNW_REQUIRES=" . $requires . "\n";
        add_one_line_into_file($changefile, $newline, $filename);
    }
    $newline = "SUNW_PATCH_PROPERTIES=\n";
    add_one_line_into_file($changefile, $newline, $filename);
    # $newline = "SUNW_PKGTYPE=usr\n";
    # add_one_line_into_file($changefile, $newline, $filename);

    # $newline = "SUNW_PKGVERS=1.0\n";
    # add_one_line_into_file($changefile, $newline, $filename);
}

############################################################
# Setting the correct Solaris locales
############################################################

sub get_solaris_language_for_langpack
{
    my ( $onelanguage ) = @_;

    my $sollanguage = $onelanguage;
    $sollanguage =~ s/\-/\_/;

    if ( $sollanguage eq "de" ) { $sollanguage = "de"; }
    elsif ( $sollanguage eq "en_US" ) { $sollanguage = "en_AU,en_CA,en_GB,en_IE,en_MT,en_NZ,en_US,en_US.UTF-8"; }
    elsif ( $sollanguage eq "es" ) { $sollanguage = "es"; }
    elsif ( $sollanguage eq "fr" ) { $sollanguage = "fr"; }
    elsif ( $sollanguage eq "hu" ) { $sollanguage = "hu_HU"; }
    elsif ( $sollanguage eq "it" ) { $sollanguage = "it"; }
    elsif ( $sollanguage eq "nl" ) { $sollanguage = "nl_BE,nl_NL"; }
    elsif ( $sollanguage eq "pl" ) { $sollanguage = "pl_PL"; }
    elsif ( $sollanguage eq "sv" ) { $sollanguage = "sv"; }
    elsif ( $sollanguage eq "pt" ) { $sollanguage = "pt_PT"; }
    elsif ( $sollanguage eq "pt_BR" ) { $sollanguage = "pt_BR"; }
    elsif ( $sollanguage eq "ru" ) { $sollanguage = "ru_RU"; }
    elsif ( $sollanguage eq "ja" ) { $sollanguage = "ja,ja_JP,ja_JP.PCK,ja_JP.UTF-8"; }
    elsif ( $sollanguage eq "ko" ) { $sollanguage = "ko,ko.UTF-8"; }
    elsif ( $sollanguage eq "zh_CN" ) { $sollanguage = "zh,zh.GBK,zh_CN.GB18030,zh.UTF-8"; }
    elsif ( $sollanguage eq "zh_TW" ) { $sollanguage = "zh_TW,zh_TW.BIG5,zh_TW.UTF-8,zh_HK.BIG5HK,zh_HK.UTF-8"; }

    return $sollanguage;
}

############################################################
# Adding language infos in pkginfo file
############################################################

sub include_languageinfos_into_pkginfo
{
    my ( $changefile, $filename, $languagestringref, $onepackage, $variableshashref ) = @_;

    # SUNWPKG_LIST=core01
    # SUNW_LOC=de

    my $locallang = $onepackage->{'language'};
    my $solarislanguage = get_solaris_language_for_langpack($locallang);

    my $newline = "SUNW_LOC=" . $solarislanguage . "\n";
    add_one_line_into_file($changefile, $newline, $filename);

    # SUNW_PKGLIST is required, if SUNW_LOC is defined.
    if ( $onepackage->{'pkg_list_entry'} )
    {
        my $packagelistentry = $onepackage->{'pkg_list_entry'};
        installer::packagelist::resolve_packagevariables(\$packagelistentry, $variableshashref, 1);
        $newline = "SUNW_PKGLIST=" . $packagelistentry . "\n";
        add_one_line_into_file($changefile, $newline, $filename);
    }
    else
    {
        # Using default package ooobasis30-core01.
        my $packagelistentry = "%BASISPACKAGEPREFIX%WITHOUTDOTOOOBASEVERSION-core01";
        installer::packagelist::resolve_packagevariables(\$packagelistentry, $variableshashref, 1);
        $newline = "SUNW_PKGLIST=" . $packagelistentry . "\n";
        add_one_line_into_file($changefile, $newline, $filename);
    }
}

############################################################
# Collecting all files included in patch in
# @installer::globals::patchfilecollector
############################################################

sub collect_patch_files
{
    my ($file, $packagename, $prefix) = @_;

    # $file is the spec file or the prototypefile

    $prefix = $prefix . "/";
    my $packagenamestring = "Package " . $packagename . " \:\n";
    push(@installer::globals::patchfilecollector, $packagenamestring);

    for ( my $i = 0; $i <= $#{$file}; $i++ )
    {
        my $line = ${$file}[$i];

        if ( $installer::globals::islinuxrpmbuild )
        {
            # %attr(0444,root,root) "/opt/openofficeorg20/program/about.bmp"

            if ( $line =~ /^\s*\%attr\(.*\)\s*\"(.*?)\"\s*$/ )
            {
                my $filename = $1 . "\n";
                $filename =~ s/^\s*\Q$prefix\E//;
                push(@installer::globals::patchfilecollector, $filename);
            }
        }

        if ( $installer::globals::issolarispkgbuild )
        {
            # f none program/msomrl.rdb=/ab/SRC680/unxsols4.pro/bin/msomrl.rdb 0444 root bin

            if ( $line =~ /^\s*f\s+\w+\s+(.*?)\=/ )
            {
                my $filename = $1 . "\n";
                push(@installer::globals::patchfilecollector, $filename);
            }
        }
    }

    push(@installer::globals::patchfilecollector, "\n");

}

############################################################
# Including package names into the depend files.
# The package names have to be included into
# packagelist. They are already saved in
# %installer::globals::dependfilenames.
############################################################

sub put_packagenames_into_dependfile
{
    my ( $file ) = @_;

    for ( my $i = 0; $i <= $#{$file}; $i++ )
    {
        my $line = ${$file}[$i];
        if ( $line =~ /^\s*\w\s+(.*?)\s*$/ )
        {
            my $abbreviation = $1;

            if ( $abbreviation =~ /\%/ ) { installer::exiter::exit_program("ERROR: Could not resolve all properties in Solaris package abbreviation \"$abbreviation\"!", "read_packagemap"); }

            if ( exists($installer::globals::dependfilenames{$abbreviation}) )
            {
                my $packagename = $installer::globals::dependfilenames{$abbreviation};
                if ( $packagename =~ /\%/ ) { installer::exiter::exit_program("ERROR: Could not resolve all properties in Solaris package name \"$packagename\"!", "read_packagemap"); }

                $line =~ s/\s*$//;
                ${$file}[$i] = $line . "\t" . $packagename . "\n";
            }
            else
            {
                installer::exiter::exit_program("ERROR: Missing packagename for Solaris package \"$abbreviation\"!", "put_packagenames_into_dependfile");
            }
        }
    }
}

############################################################
# Including the relocatable directory into
# spec file and pkginfo file
# Linux: set topdir in specfile
# Solaris: remove $relocatablepath (/opt/)
# for all objects in prototype file
# and changing "topdir" for Linux
############################################################

sub prepare_packages
{
    my ($loggingdir, $packagename, $staticpath, $relocatablepath, $onepackage, $variableshashref, $filesref, $languagestringref) = @_;

    my $filename = "";
    my $newline = "";
    my $newepmdir = $installer::globals::epmoutpath . $installer::globals::separator;

    my $localrelocatablepath = $relocatablepath;
    if ( $localrelocatablepath ne "/" ) { $localrelocatablepath =~ s/\/\s*$//; }

    if ( $installer::globals::issolarispkgbuild )
    {
        $filename = $packagename . ".pkginfo";
        $newline = "BASEDIR\=" . $localrelocatablepath . "\n";
    }

    if ( $installer::globals::islinuxrpmbuild )
    {
        # if ( $localrelocatablepath =~ /^\s*$/ ) { $localrelocatablepath = "/"; }; # at least the "/"
        $filename =  $packagename . ".spec";
        $newline = "Prefix\:\ " . $localrelocatablepath . "\n";
    }

    my $completefilename = $newepmdir . $filename;

    if ( ! -f $completefilename) { installer::exiter::exit_program("ERROR: Did not find file: $completefilename", "prepare_packages"); }
    my $changefile = installer::files::read_file($completefilename);
    if ( $newline ne "" )
    {
        add_one_line_into_file($changefile, $newline, $filename);
        installer::files::save_file($completefilename, $changefile);
    }

    # my $newepmdir = $completefilename;
    # installer::pathanalyzer::get_path_from_fullqualifiedname(\$newepmdir);

    # adding new "topdir" and removing old "topdir" in specfile

    if ( $installer::globals::islinuxrpmbuild )
    {
        set_topdir_in_specfile($changefile, $filename, $newepmdir);
        set_autoprovreq_in_specfile($changefile, $onepackage->{'findrequires'}, "$installer::globals::unpackpath" . "/bin");
        set_packager_in_specfile($changefile);
        if ( is_extension_package($changefile) ) { set_prereq_in_specfile($changefile); }
        set_license_in_specfile($changefile, $variableshashref);
        set_tab_into_datafile($changefile, $filesref);
        # check_requirements_in_specfile($changefile);
        installer::files::save_file($completefilename, $changefile);
        if ( $installer::globals::patch ) { collect_patch_files($changefile, $packagename, $localrelocatablepath); }
    }

    # removing the relocatable path in prototype file

    if ( $installer::globals::issolarispkgbuild )
    {
        set_revision_in_pkginfo($changefile, $filename, $variableshashref, $packagename);
        set_maxinst_in_pkginfo($changefile, $filename);
        set_solaris_parameter_in_pkginfo($changefile, $filename, $variableshashref);
        if ( $installer::globals::issolarisx86build ) { fix_architecture_setting($changefile); }
        if ( ! $installer::globals::patch ) { set_patchlist_in_pkginfo_for_respin($changefile, $filename, $variableshashref, $packagename); }
        if ( $installer::globals::patch ) { include_patchinfos_into_pkginfo($changefile, $filename, $variableshashref); }
        if (( $onepackage->{'language'} ) && ( $onepackage->{'language'} ne "" ) && ( $onepackage->{'language'} ne "en-US" )) { include_languageinfos_into_pkginfo($changefile, $filename, $languagestringref, $onepackage, $variableshashref); }
        installer::files::save_file($completefilename, $changefile);

        my $prototypefilename = $packagename . ".prototype";
        $prototypefilename = $newepmdir . $prototypefilename;
        if (! -f $prototypefilename) { installer::exiter::exit_program("ERROR: Did not find prototype file: $prototypefilename", "prepare_packages"); }

        my $prototypefile = installer::files::read_file($prototypefilename);
        make_prototypefile_relocatable($prototypefile, $relocatablepath);
        set_volatilefile_into_prototypefile($prototypefile, $filesref);
        my $classesstring = set_tab_into_datafile($prototypefile, $filesref);
        if ($classesstring)
        {
            include_classes_into_pkginfo($changefile, $classesstring);
            installer::files::save_file($completefilename, $changefile);
        }

        if ( $installer::globals::patch ) { add_scripts_into_prototypefile($prototypefile, $prototypefilename, $languagestringref, $staticpath); }

        installer::files::save_file($prototypefilename, $prototypefile);
        if ( $installer::globals::patch ) { collect_patch_files($prototypefile, $packagename, ""); }

        # Adding package names into depend files for Solaris (not supported by epm)
        my $dependfilename = $packagename . ".depend";
        $dependfilename = $newepmdir . $dependfilename;
        if ( -f $dependfilename)
        {
            my $dependfile = installer::files::read_file($dependfilename);
            put_packagenames_into_dependfile($dependfile);
            installer::files::save_file($dependfilename, $dependfile);
        }
    }

    return $newepmdir;
}

############################################################
# Linux requirement for perl is changed by epm from
# /usr/bin/perl to perl .
# Requires: perl
############################################################

sub check_requirements_in_specfile
{
    my ( $specfile ) = @_;

    for ( my $i = 0; $i <= $#{$specfile}; $i++ )
    {
        if (( ${$specfile}[$i] =~ /^\s*Requires/ ) && ( ${$specfile}[$i] =~ /\bperl\b/ ) && ( ! (  ${$specfile}[$i] =~ /\/usr\/bin\/perl\b/ )))
        {
            my $oldline = ${$specfile}[$i];
            ${$specfile}[$i] =~ s/perl/\/usr\/bin\/perl/;
            my $newline = ${$specfile}[$i];

            $oldline =~ s/\s*$//;
            $newline =~ s/\s*$//;
            $installer::logger::Lang->printf("Spec File: Changing content from \"%s\" to \"%s\".\n",
                $oldline, $newline);
        }
    }
}

###############################################################################
# Replacement of PRODUCTINSTALLLOCATION and PRODUCTDIRECTORYNAME in the
# epm list file.
# The complete rootpath is stored in $installer::globals::rootpath
# or for each package in $onepackage->{'destpath'}
# The static rootpath is stored in $staticpath
# The relocatable path is stored in $relocatablepath
# PRODUCTINSTALLLOCATION is the relocatable part ("/opt") and
# PRODUCTDIRECTORYNAME the static path ("openofficeorg20").
# In standard epm process:
# No usage of package specific variables like $BASEDIR, because
# 1. These variables would be replaced in epm process
# 2. epm version 3.7 does not support relocatable packages
###############################################################################

sub resolve_path_in_epm_list_before_packaging
{
    my ($listfile, $listfilename, $variable, $path) = @_;

    installer::logger::include_header_into_logfile("Replacing variables in epm list file:");

    $path =~ s/\/\s*$//;
    replace_variables_in_shellscripts($listfile, $listfilename, $variable, $path);

}

#################################################################
# Determining the rpm version. Beginning with rpm version 4.0
# the tool to create RPMs is "rpmbuild" and no longer "rpm"
#################################################################

sub determine_rpm_version
{
    my $rpmversion = 0;
    my $rpmout = "";
    my $systemcall = "";

    # my $systemcall = "rpm --version |";
    # "rpm --version" has problems since LD_LIBRARY_PATH was removed. Therefore the content of $RPM has to be called.
    # "rpm --version" and "rpmbuild --version" have the same output. Therefore $RPM can be used. Its value
    # is saved in $installer::globals::rpm

    if ( $installer::globals::rpm ne "" )
    {
        $systemcall = "$installer::globals::rpm --version |";
    }
    else
    {
        $systemcall = "rpm --version |";
    }

    open (RPM, "$systemcall");
    $rpmout = <RPM>;
    close (RPM);

    if ( $rpmout ne "" )
    {
        $rpmout =~ s/\s*$//g;

        $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

        if ( $rpmout eq "" )
        {
            $installer::logger::Lang->printf("ERROR: Could not find file \"rpm\" !\n");
        }
        else
        {
            $installer::logger::Lang->printf("Success: rpm version: %s\n", $rpmout);
        }

        if ( $rpmout =~ /(\d+)\.(\d+)\.(\d+)/ ) { $rpmversion = $1; }
        elsif ( $rpmout =~ /(\d+)\.(\d+)/ ) { $rpmversion = $1; }
        elsif ( $rpmout =~ /(\d+)/ ) { $rpmversion = $1; }
        else { installer::exiter::exit_program("ERROR: Unknown format: $rpmout ! Expected: \"a.b.c\", or \"a.b\", or \"a\"", "determine_rpm_version"); }
    }

    return $rpmversion;
}

####################################################
# Writing some info about rpm into the log file
####################################################

sub log_rpm_info
{
    my $systemcall = "";
    my $infoline = "";

    $installer::logger::Lang->printf("\n");
    $installer::logger::Lang->printf("Logging rpmrc content using --showrc\n");
    $installer::logger::Lang->printf("\n");

    if ( $installer::globals::rpm ne "" )
    {
        $systemcall = "$installer::globals::rpm --showrc |";
    }
    else
    {
        $systemcall = "rpm --showrc |";
    }

    my @fullrpmout = ();

    open (RPM, "$systemcall");
    while (<RPM>) {push(@fullrpmout, $_); }
    close (RPM);

    if ( $#fullrpmout > -1 )
    {
        for ( my $i = 0; $i <= $#fullrpmout; $i++ )
        {
            my $rpmout = $fullrpmout[$i];
            $rpmout =~ s/\s*$//g;

            $infoline = "$rpmout\n";
            $infoline =~ s/error/e_r_r_o_r/gi;  # avoiding log problems
            $installer::logger::Lang->print($infoline);
        }
    }
    else
    {
        $installer::logger::Lang->printf("Problem in systemcall: %s : No return value\n", $systemcall);
    }

    $installer::logger::Lang->printf("End of logging rpmrc\n");
    $installer::logger::Lang->print("\n");
}

#################################################
# Systemcall to start the packaging process
#################################################

sub create_packages_without_epm
{
    my ($epmdir, $packagename, $includepatharrayref, $allvariables, $languagestringref) = @_;

    # Solaris: pkgmk -o -f solaris-2.8-sparc/SUNWso8m34.prototype -d solaris-2.8-sparc
    # Solaris: pkgtrans solaris-2.8-sparc SUNWso8m34.pkg SUNWso8m34
    # Solaris: tar -cf - SUNWso8m34 | gzip > SUNWso8m34.tar.gz

    if ( $installer::globals::issolarispkgbuild )
    {
        my $prototypefile = $epmdir . $packagename . ".prototype";
        if (! -f $prototypefile) { installer::exiter::exit_program("ERROR: Did not find file: $prototypefile", "create_packages_without_epm"); }

        my $destinationdir = $prototypefile;
        installer::pathanalyzer::get_path_from_fullqualifiedname(\$destinationdir);
        $destinationdir =~ s/\/\s*$//;  # removing ending slashes

        # my $systemcall = "pkgmk -o -f $prototypefile -d $destinationdir \> /dev/null 2\>\&1";
        my $systemcall = "pkgmk -l 1073741824 -o -f $prototypefile -d $destinationdir 2\>\&1 |";
        $installer::logger::Info->printf("... %s ...\n", $systemcall);

        my $maxpkgmkcalls = 3;

        for ( my $i = 1; $i <= $maxpkgmkcalls; $i++ )
        {
            my @pkgmkoutput = ();

            open (PKGMK, "$systemcall");
            while (<PKGMK>) {push(@pkgmkoutput, $_); }
            close (PKGMK);

            my $returnvalue = $?;   # $? contains the return value of the systemcall

            $installer::logger::Lang->printf("Systemcall (Try %d): %s\n", $i, $systemcall);

            for ( my $j = 0; $j <= $#pkgmkoutput; $j++ )
            {
                if ( $i < $maxpkgmkcalls ) { $pkgmkoutput[$j] =~ s/\bERROR\b/PROBLEM/ig; }
                $installer::logger::Lang->print($pkgmkoutput[$j]);
            }

            if ($returnvalue)
            {
                $installer::logger::Lang->printf("Try %s : Could not execute \"%s\"!\n",
                    $i, $systemcall);
                if ( $i == $maxpkgmkcalls ) { installer::exiter::exit_program("ERROR: \"$systemcall\"!", "create_packages_without_epm"); }
            }
            else
            {
                $installer::logger::Info->printf("Success: (Try %d): Executed \"%s\" successfully\n",
                    $i, $systemcall);
                $installer::logger::Lang->printf("Success: (Try %d): Executed \"%s\" successfully\n",
                    $i, $systemcall);
                last;
            }
        }

        # It might be necessary to save uncompressed Solaris packages

        if ( $allvariables->{'JDSBUILD'} )
        {
            if ( ! $installer::globals::jds_language_controlled )
            {
                my $correct_language = installer::worker::check_jds_language($allvariables, $languagestringref);
                $installer::globals::correct_jds_language = $correct_language;
                $installer::globals::jds_language_controlled = 1;
            }

            if ( $installer::globals::correct_jds_language )
            {
                if ( $installer::globals::saved_packages_path eq "" )
                {
                    $packagestempdir = installer::systemactions::create_directories("jds", $languagestringref);
                    $installer::globals::saved_packages_path = $packagestempdir;
                    push(@installer::globals::jdsremovedirs, $packagestempdir);
                }

                $systemcall = "cd $destinationdir; cp -p -R $packagename $installer::globals::saved_packages_path;";
                make_systemcall($systemcall);
                $installer::logger::Info->printf("... %s ...\n", $systemcall);

                # Setting unix rights to "775" for all created directories inside the package,
                # that is saved in temp directory

                $systemcall = "cd $packagestempdir; find $packagename -type d -exec chmod 775 \{\} \\\;";
                $installer::logger::Info->printf("... %s ...\n", $systemcall);

                $returnvalue = system($systemcall);

                $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

                if ($returnvalue)
                {
                    $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n", $systemcall);
                }
                else
                {
                    $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $systemcall);
                }
            }
        }

        # compressing packages

        if ( ! $installer::globals::solarisdontcompress )
        {
            my $faspac = "faspac-so.sh";

            my $compressorref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$faspac, $includepatharrayref, 0);
            if ($$compressorref ne "")
            {
                # Saving original pkginfo, to set time stamp later
                my $pkginfoorig = "$destinationdir/$packagename/pkginfo";
                my $pkginfotmp = "$destinationdir/$packagename" . ".pkginfo.tmp";
                $systemcall = "cp -p $pkginfoorig $pkginfotmp";
                make_systemcall($systemcall);

                $faspac = $$compressorref;
                $installer::logger::Lang->printf("Found compressor: %s\n", $faspac);

                $installer::logger::Info->printf("... %s ...\n", $faspac);
                $installer::logger::Lang->add_timestamp("Starting $faspac");

                $systemcall = "/bin/sh $faspac -a -q -d $destinationdir $packagename";   # $faspac has to be the absolute path!
                make_systemcall($systemcall);

                # Setting time stamp for pkginfo, because faspac-so.sh changed the pkginfo file,
                # updated the size and checksum, but not the time stamp.
                $systemcall = "touch -r $pkginfotmp $pkginfoorig";
                make_systemcall($systemcall);
                if ( -f $pkginfotmp ) { unlink($pkginfotmp); }

                $installer::logger::Lang->add_timestamp("End of $faspac");
            }
            else
            {
                $installer::logger::Lang->printf("Not found: %s\n", $faspac);
            }
        }

        # Setting unix rights to "775" for all created directories inside the package

        $systemcall = "cd $destinationdir; find $packagename -type d -exec chmod 775 \{\} \\\;";
        $installer::logger::Info->printf("... %s ...\n", $systemcall);

        $returnvalue = system($systemcall);

        $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

        if ($returnvalue)
        {
            $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n", $systemcall);
        }
        else
        {
            $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $systemcall);
        }
    }

    # Linux: rpm -bb so8m35.spec    ( -> dependency check abklemmen? )

    if ( $installer::globals::islinuxrpmbuild )
    {
        my $specfilename = $epmdir . $packagename . ".spec";
        if (! -f $specfilename) { installer::exiter::exit_program("ERROR: Did not find file: $specfilename", "create_packages_without_epm"); }

        # my $rpmcommand = "rpm";
        my $rpmcommand = $installer::globals::rpm;
        my $rpmversion = determine_rpm_version();

        # if ( $rpmversion >= 4 ) { $rpmcommand = "rpmbuild"; }

        # saving globally for later usage
        $installer::globals::rpmcommand = $rpmcommand;
        $installer::globals::rpmquerycommand = "rpm";

        my $target = "";
        if ( $installer::globals::compiler =~ /unxlngi/) { $target = "i586"; }
        elsif ( $installer::globals::compiler =~ /unxlng/) {$target = (POSIX::uname())[4]; }

        # rpm 4.6 ignores buildroot tag in spec file

        my $buildrootstring = "";

        if ( $rpmversion >= 4 )
        {
            my $dir = getcwd;
            my $buildroot = $dir . "/" . $epmdir . "buildroot/";
            $buildrootstring = "--buildroot=$buildroot";
            mkdir($buildroot = $dir . "/" . $epmdir . "BUILD/");
        }

        if ( ! $installer::globals::rpminfologged )
        {
            log_rpm_info();
            $installer::globals::rpminfologged = 1;
        }

        my $systemcall = "$rpmcommand -bb --define \"_unpackaged_files_terminate_build  0\" $specfilename --target $target $buildrootstring 2\>\&1 |";

        $installer::logger::Info->printf("... %s ...\n", $systemcall);

        my $maxrpmcalls = 3;
        my $rpm_failed = 0;

        for ( my $i = 1; $i <= $maxrpmcalls; $i++ )
        {
            my @rpmoutput = ();

            open (RPM, "$systemcall");
            while (<RPM>) {push(@rpmoutput, $_); }
            close (RPM);

            my $returnvalue = $?;   # $? contains the return value of the systemcall

            $installer::logger::Lang->printf("Systemcall (Try %d): %s\n", $i, $systemcall);

            for ( my $j = 0; $j <= $#rpmoutput; $j++ )
            {
                # if ( $i < $maxrpmcalls ) { $rpmoutput[$j] =~ s/\bERROR\b/PROBLEM/ig; }
                $rpmoutput[$j] =~ s/\bERROR\b/PROBLEM/ig;
                $installer::logger::Lang->print($rpmoutput[$j]);
            }

            if ($returnvalue)
            {
                $installer::logger::Lang->printf("Try %d : Could not execute \"%s\"!\n", $i, $systemcall);
                $rpm_failed = 1;
            }
            else
            {
                $installer::logger::Info->printf("Success (Try %d): Executed \"%s\" successfully!\n", $i, $systemcall);
                $installer::logger::Lang->printf("Success (Try %d): Executed \"%s\" successfully!\n", $i, $systemcall);
                $rpm_failed = 0;
                last;
            }
        }

        if ( $rpm_failed )
        {
            # Because of the problems with LD_LIBARY_PATH, a direct call of local "rpm" or "rpmbuild" might be successful
            my $rpmprog = "";
            if ( -f "/usr/bin/rpmbuild" ) { $rpmprog = "/usr/bin/rpmbuild"; }
            elsif ( -f "/usr/bin/rpm" ) { $rpmprog = "/usr/bin/rpm"; }

            if ( $rpmprog ne "" )
            {
                $installer::logger::Info->printf("... %s ...\n", $rpmprog);

                my $helpersystemcall = "$rpmprog -bb $specfilename --target $target $buildrootstring 2\>\&1 |";

                my @helperrpmoutput = ();

                open (RPM, "$helpersystemcall");
                while (<RPM>) {push(@helperrpmoutput, $_); }
                close (RPM);

                my $helperreturnvalue = $?; # $? contains the return value of the systemcall

                $installer::logger::Lang->printf("\n");
                $installer::logger::Lang->printf("Last try: Using %s directly (problem with LD_LIBARY_PATH)\n",
                    $rpmprog);

                $installer::logger::Lang->printf("\n");
                $installer::logger::Lang->printf("Systemcall: %s\n", $helpersystemcall);

                foreach my $line (@helperrpmoutput)
                {
                    $installer::logger::Lang->print($helperrpmoutput[$j]);
                }

                if ($helperreturnvalue)
                {
                    $installer::logger::Lang->printf("Could not execute \"%s\"!\n", $helpersystemcall);
                }
                else
                {
                    $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $helpersystemcall);
                    $installer::logger::Info->printf("Success: Executed \"%s\" successfully!\n", $helpersystemcall);
                    $rpm_failed = 0;
                }
            }

            # Now it is really time to exit this packaging process, if the error still occurs
            if ( $rpm_failed ) { installer::exiter::exit_program("ERROR: \"$systemcall\"!", "create_packages_without_epm"); }
        }
    }
}

#################################################
# Removing all temporary files created by epm
#################################################

sub remove_temporary_epm_files
{
    my ($epmdir, $loggingdir, $packagename) = @_;

    # saving the files into the loggingdir

    if ( $installer::globals::issolarispkgbuild )
    {
        my @extensions = ();
        push(@extensions, ".pkginfo");
        push(@extensions, ".prototype");
        push(@extensions, ".postinstall");
        push(@extensions, ".postremove");
        push(@extensions, ".preinstall");
        push(@extensions, ".preremove");
        push(@extensions, ".depend");

        for ( my $i = 0; $i <= $#extensions; $i++ )
        {
            my $removefile = $epmdir . $packagename . $extensions[$i];
            my $destfile = $loggingdir . $packagename . $extensions[$i] . ".log";

            if (! -f $removefile) { next; }

            my $systemcall = "mv -f $removefile $destfile";
            system($systemcall);     # ignoring the return value
            $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
        }
    }

    if ( $installer::globals::islinuxrpmbuild )
    {
        my $removefile = $epmdir . $packagename . ".spec";
        my $destfile = $loggingdir . $packagename . ".spec.log";

         # if (! -f $removefile) { next; }

        my $systemcall = "mv -f $removefile $destfile";
        system($systemcall);     # ignoring the return value
        $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

        # removing the directory "buildroot"

        my $removedir = $epmdir . "buildroot";

        $systemcall = "rm -rf $removedir";

        $installer::logger::Info->printf("... %s ...\n", $systemcall);

        my $returnvalue = system($systemcall);

        $removedir = $epmdir . "BUILD";

        $systemcall = "rm -rf $removedir";

        $installer::logger::Info->printf("... %s ...\n", $systemcall);

        $returnvalue = system($systemcall);

        $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

        if ($returnvalue)
        {
            $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n", $systemcall);
        }
        else
        {
            $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $systemcall);
        }
    }
}

######################################################
# Making the systemcall
######################################################

sub make_systemcall
{
    my ($systemcall) = @_;

    my $returnvalue = system($systemcall);

    $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

    if ($returnvalue)
    {
        $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n", $systemcall);
    }
    else
    {
        $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $systemcall);
    }
}

###########################################################
# Creating a better directory structure in the solver.
###########################################################

sub create_new_directory_structure
{
    my ($newepmdir) = @_;

    my $newdir = $installer::globals::epmoutpath;

    if ( $installer::globals::islinuxrpmbuild )
    {
        my $rpmdir;
                my $machine = "";
        if ( $installer::globals::compiler =~ /unxlngi/) {
                    $rpmdir = "$installer::globals::epmoutpath/RPMS/i586";
                }
        elsif ( $installer::globals::compiler =~ /unxlng/) {
                    $machine = (POSIX::uname())[4];
                    $rpmdir = "$installer::globals::epmoutpath/RPMS/$machine";
                }
                else { installer::exiter::exit_program("ERROR: rpmdir undefined !", "create_new_directory_structure"); }

        my $systemcall = "mv $rpmdir/* $newdir";    # moving the rpms into the directory "RPMS"

        my $returnvalue = system($systemcall);

        $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);

        if ($returnvalue)
        {
            $installer::logger::Lang->printf("ERROR: Could not move content of \"%s\" to \"%s\"!\n",
                $rpmdir,$newdir);
        }
        else
        {
            $installer::logger::Lang->printf("Success: Moved content of \"%s\" to \"%s\"!\n",
                $rpmdir, $newdir);
        }

        # and removing the empty directory

        if ( $machine ne "" )
        {
            installer::systemactions::remove_empty_directory("$installer::globals::epmoutpath/RPMS/$machine");
        }
        installer::systemactions::remove_empty_directory("$installer::globals::epmoutpath/RPMS/x86_64");
        installer::systemactions::remove_empty_directory("$installer::globals::epmoutpath/RPMS/i586");
        installer::systemactions::remove_empty_directory("$installer::globals::epmoutpath/RPMS/i386");
        installer::systemactions::remove_empty_directory("$installer::globals::epmoutpath/RPMS");

    }

    # Setting unix rights to "775" for $newdir ("RPMS" or "packages")

    my $localcall = "chmod 775 $newdir \>\/dev\/null 2\>\&1";
    my $callreturnvalue = system($localcall);

    $installer::logger::Lang->printf("Systemcall: %s\n", $localcall);

    if ($callreturnvalue)
    {
        $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n", $localcall);
    }
    else
    {
        $installer::logger::Lang->printf("Success: Executed \"%s\" successfully!\n", $localcall);
    }
}

######################################################
# Collect modules with product specific styles.
######################################################

sub collect_modules_with_style
{
    my ($style, $modulesarrayref) = @_;

    my @allmodules = ();

    for ( my $i = 0; $i <= $#{$modulesarrayref}; $i++ )
    {
        my $onemodule = ${$modulesarrayref}[$i];
        my $styles = "";
        if ( $onemodule->{'Styles'} ) { $styles = $onemodule->{'Styles'}; }
        if ( $styles =~ /\b\Q$style\E\b/ )
        {
            push(@allmodules, $onemodule);
        }
    }

    return \@allmodules;
}

######################################################
# Remove modules without packagecontent.
######################################################

sub remove_modules_without_package
{
    my ($allmodules) = @_;

    my @allmodules = ();

    for ( my $i = 0; $i <= $#{$allmodules}; $i++ )
    {
        my $onemodule = ${$allmodules}[$i];
        my $packagename = "";
        if ( $onemodule->{'PackageName'} ) { $packagename = $onemodule->{'PackageName'}; }
        if ( $packagename ne "" )
        {
            push(@allmodules, $onemodule);
        }
    }

    return \@allmodules;
}

######################################################
# Unpacking tar.gz file and setting new packagename.
######################################################

sub unpack_tar_gz_file
{
    my ($packagename, $destdir) = @_;

    my $newpackagename = "";

    if ( $packagename =~ /\.tar\.gz\s*$/ )
    {
        # Collecting all packages in directory "packages"
        my $oldcontent = installer::systemactions::read_directory($destdir);

        # unpacking gunzip
        my $systemcall = "cd $destdir; cat $packagename | gunzip | tar -xf -";
        make_systemcall($systemcall);

        # deleting the tar.gz files
        $systemcall = "cd $destdir; rm -f $packagename";
        make_systemcall($systemcall);

        # Finding new content -> that is the package name
        my ($newcontent, $allcontent ) = installer::systemactions::find_new_content_in_directory($destdir, $oldcontent);
        $newpackagename = ${$newcontent}[0];
        installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$newpackagename);
    }

    if ( $newpackagename ne "" ) { $packagename = $newpackagename; }

    return $packagename;
}

######################################################
# Copying files of child projects.
######################################################

sub copy_childproject_files
{
    my ($allmodules, $sopackpath, $destdir, $modulesarrayref, $allvariables, $subdir, $includepatharrayref, $use_sopackpath) = @_;

    for ( my $i = 0; $i <= $#{$allmodules}; $i++ )
    {
        my $localdestdir = $destdir;
        my $onemodule = ${$allmodules}[$i];
        my $packagename = $onemodule->{'PackageName'};
        my $sourcefile = "";
        if ( $use_sopackpath )
        {
            $sourcefile = $sopackpath . $installer::globals::separator . $installer::globals::compiler . $installer::globals::separator . $subdir . $installer::globals::separator . $packagename;
        }
        else
        {
            my $sourcepathref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$packagename, $includepatharrayref, 1);
            $sourcefile = $$sourcepathref;
        }

        if ( ! -f $sourcefile ) { installer::exiter::exit_program("ERROR: File not found: $sourcefile ($packagename) !", "copy_childproject_files"); }
        if ( $onemodule->{'Subdir'} )
        {
            $localdestdir = $localdestdir . $installer::globals::separator . $onemodule->{'Subdir'};
            if ( ! -d $localdestdir ) { installer::systemactions::create_directory($localdestdir); }
        }
        installer::systemactions::copy_one_file($sourcefile, $localdestdir);
        # Solaris: unpacking tar.gz files and setting new packagename
        if ( $installer::globals::issolarispkgbuild ) { $packagename = unpack_tar_gz_file($packagename, $localdestdir); }

        if (( $installer::globals::isxpdplatform ) && ( $allvariables->{'XPDINSTALLER'} ))
        {
            installer::xpdinstaller::create_xpd_file_for_childproject($onemodule, $localdestdir, $packagename, $allvariableshashref, $modulesarrayref);
        }
    }

}

######################################################
# Copying files for system integration.
######################################################

sub copy_and_unpack_tar_gz_files
{
    my ($sourcefile, $destdir) = @_;

    my $systemcall = "cd $destdir; cat $sourcefile | gunzip | tar -xf -";
    make_systemcall($systemcall);
}

######################################################
# Including child packages into the
# installation set.
######################################################

sub put_childprojects_into_installset
{
    my ($newdir, $allvariables, $modulesarrayref, $includepatharrayref) = @_;

    my $infoline = "";

    my $sopackpath = "";
    if ( $ENV{'SO_PACK'} ) { $sopackpath  = $ENV{'SO_PACK'}; }
    else { installer::exiter::exit_program("ERROR: Environment variable SO_PACK not set!", "put_childprojects_into_installset"); }

    my $destdir = "$newdir";

    # adding Java

    my $sourcefile = "";

    # Finding the modules defined in scp (with flag JAVAMODULE, ADAMODULE, ...)
    # Getting name of package from scp-Module
    # Copy file into installation set
    # Create xpd file and put it into xpd directory
    # xpd file has to be created completely from module and package itself (-> no packagelist!)

    if ( $allvariables->{'JAVAPRODUCT'} )
    {
        # Collect all modules with flag "JAVAMODULE"
        my $allmodules = collect_modules_with_style("JAVAMODULE", $modulesarrayref);
        $allmodules = remove_modules_without_package($allmodules);
        copy_childproject_files($allmodules, $sopackpath, $destdir, $modulesarrayref, $allvariables, "jre", $includepatharrayref, 1);
    }

    # Adding additional required packages (freetype).
    # This package names are stored in global array @installer::globals::requiredpackages

    if ( $allvariables->{'ADDREQUIREDPACKAGES'} )
    {
        # Collect all modules with flag "REQUIREDPACKAGEMODULE"
        my $allmodules = collect_modules_with_style("REQUIREDPACKAGEMODULE", $modulesarrayref);
        $allmodules = remove_modules_without_package($allmodules);
        copy_childproject_files($allmodules, $sopackpath, $destdir, $modulesarrayref, $allvariables, "requiredpackages", $includepatharrayref, 1);
    }

    # Collect all modules with flag "USERLANDMODULE"
    my $alluserlandmodules = collect_modules_with_style("USERLANDMODULE", $modulesarrayref);
    $alluserlandmodules = remove_modules_without_package($alluserlandmodules);
    copy_childproject_files($alluserlandmodules, $sopackpath, $destdir, $modulesarrayref, $allvariables, "", $includepatharrayref, 0);

}

######################################################
# Checking whether the new content is a directory and
# not a package. If it is a directory, the complete
# content of the directory has to be added to the
# array newcontent.
######################################################

sub control_subdirectories
{
    my ($content, $subdir) = @_;

    my @newcontent = ();

    for ( my $i = 0; $i <= $#{$content}; $i++ )
    {
        if ( -d ${$content}[$i] )
        {
            $subdir = ${$content}[$i];
            installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$subdir);
            my $allpackages = installer::systemactions::read_directory(${$content}[$i]);
            for ( my $j = 0; $j <= $#{$allpackages}; $j++ )
            {
                # Currently only Linux rpm is supported, debian packages cannot be installed via xpd installer
                if (( $installer::globals::islinuxbuild ) && ( ! ( ${$allpackages}[$j] =~ /\.rpm\s*$/ ))) { next; }
                push(@newcontent, ${$allpackages}[$j]);
            }
        }
        else
        {
            push(@newcontent, ${$content}[$i]);
        }
    }

    return (\@newcontent, $subdir);
}

######################################################
# Including the system integration files into the
# installation sets.
######################################################

sub put_systemintegration_into_installset
{
    my ($newdir, $includepatharrayref, $allvariables, $modulesarrayref) = @_;

    my $destdir = $newdir;

    # adding System integration files

    my $sourcefile = "";

    # Finding the modules defined in scp (with flag SYSTEMMODULE)
    # Getting name of package from scp-Module
    # Search package in list off all include files
    # Copy file into installation set and unpack it (always tar.gz)
    # Create xpd file and put it into xpd directory
    # tar.gz can contain a different number of packages -> automatically create hidden sub modules
    # xpd file has to be created completely from module and package itself (-> no packagelist!)

    # Collect all modules with flag "SYSTEMMODULE"
    my $allmodules = collect_modules_with_style("SYSTEMMODULE", $modulesarrayref);
    $allmodules = remove_modules_without_package($allmodules);

    for ( my $i = 0; $i <= $#{$allmodules}; $i++ )
    {
        my $onemodule = ${$allmodules}[$i];
        my $packagetarfilename = $onemodule->{'PackageName'};

        $installer::logger::Lang->printf("Including into installation set: %s\n", $packagetarfilename);

        my $sourcepathref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$packagetarfilename, $includepatharrayref, 1);
        if ( $$sourcepathref eq "" ) { installer::exiter::exit_program("ERROR: Source path not found for $packagetarfilename!", "copy_systemintegration_files"); }

        # Collecting all packages in directory "packages" or "RPMS"
        my $oldcontent = installer::systemactions::read_directory($destdir);

        copy_and_unpack_tar_gz_files($$sourcepathref, $destdir);

        # Finding new content -> that is the package name
        my ($newcontent, $allcontent ) = installer::systemactions::find_new_content_in_directory($destdir, $oldcontent);

        # special handling, if new content is a directory
        my $subdir = "";
        if ( ! $installer::globals::issolarispkgbuild ) { ($newcontent, $subdir) = control_subdirectories($newcontent); }

        # Adding license content into Solaris packages
        if (( $installer::globals::issolarispkgbuild ) && ( $installer::globals::englishlicenseset ) && ( ! $variableshashref->{'NO_LICENSE_INTO_COPYRIGHT'} )) { installer::worker::add_license_into_systemintegrationpackages($destdir, $newcontent); }

        if (( $installer::globals::isxpdplatform ) && ( $allvariables->{'XPDINSTALLER'} ))
        {
            installer::xpdinstaller::create_xpd_file_for_systemintegration($onemodule, $newcontent, $modulesarrayref, $subdir);
        }
    }
}

######################################################
# Analyzing the Unix installation path.
# From the installation path /opt/openofficeorg20
# is the part /opt relocatable and the part
# openofficeorg20 static.
######################################################

sub analyze_rootpath
{
    my ($rootpath, $staticpathref, $relocatablepathref, $allvariables) = @_;

    $rootpath =~ s/\/\s*$//;    # removing ending slash

    ##############################################################
    # Version 1: "/opt" is variable and "openofficeorg20" fixed
    ##############################################################

    # my $staticpath = $rootpath;
    # installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$staticpath);
    # $$staticpathref = $staticpath;                # will be "openofficeorg20"

    # my $relocatablepath = $rootpath;
    # installer::pathanalyzer::get_path_from_fullqualifiedname(\$relocatablepath);
    # $$relocatablepathref = $relocatablepath;      # will be "/opt/"

    ##############################################################
    # Version 2: "/opt/openofficeorg20" is variable and "" fixed
    ##############################################################

    # if ( $$relocatablepathref eq "" ) # relocatablepath is not defined in package list
    # {
    #   $$staticpathref = "";   # will be ""
    #   $$relocatablepathref = $rootpath . "\/"; # relocatable path must end with "/", will be "/opt/openofficeorg20/"
    #   # setting the static path to the hostname of the directory with style OFFICEDIRECTORY
    #   if ( $allvariables->{'SETSTATICPATH'} ) { $$staticpathref = $installer::globals::officedirhostname; }
    #
    # }
    # else  # relocatablepath is defined in package list
    # {
    #   $$relocatablepathref =~ s/\/\s*$//;         # removing ending slash
    #   $$relocatablepathref = $$relocatablepathref . "\/"; # relocatable path must end with "/"
    #   my $staticpath = $rootpath;
    #   $staticpath =~ s/\Q$$relocatablepathref\E//;
    #   $staticpath =~ s/\/\s*$//;
    #   $$staticpathref = $staticpath;
    # }

    ##############################################################
    # Version 3: "/" is variable and "/opt/openofficeorg20" fixed
    ##############################################################

    $$relocatablepathref = "/";
    # Static path has to contain the office directory name. This is replaced in shellscripts.
    $$staticpathref = $rootpath . $installer::globals::separator . $installer::globals::officedirhostname;
    # For RPM version 3.x it is required, that Prefix is not "/" in spec file. In this case --relocate will not work,
    # because RPM 3.x says, that the package is not relocatable. Therefore we have to use Prefix=/opt and for
    # all usages of --relocate this path has to be on both sides of the "=": --relocate /opt=<myselectdir>/opt .
    if ( $installer::globals::islinuxrpmbuild )
    {
        $$relocatablepathref = $rootpath . "\/"; # relocatable path must end with "/", will be "/opt/"
        $$staticpathref = $installer::globals::officedirhostname; # to be used as replacement in shell scripts
    }

    if ( $installer::globals::islinuxdebbuild )
    {
        $$relocatablepathref = "";
        # $$staticpathref is already "/opt/openoffice.org3", no additional $rootpath required.
        # $$staticpathref = $rootpath . $installer::globals::separator . $$staticpathref;  # no relocatibility for Debian
    }

}

######################################################
# Including license and readme into
# Unix installation sets.
######################################################

sub put_installsetfiles_into_installset
{
    my ($destdir) = @_;

    # All files for the installation set are saved in the global
    # array @installer::globals::installsetfiles

    for ( my $i = 0; $i <= $#installer::globals::installsetfiles; $i++ )
    {
        my $onefile = $installer::globals::installsetfiles[$i];
        my $sourcefile = $onefile->{'sourcepath'};
        my $destfile = "";
        if ( $installer::globals::addjavainstaller ) { $destfile = $onefile->{'Name'}; }
        else { $destfile = $destdir . $installer::globals::separator . $onefile->{'Name'}; }
        installer::systemactions::copy_one_file($sourcefile, $destfile);

        $installer::logger::Lang->printf("Adding to installation set \"%s\" from source \"%s\".\n",
            $destfile, $sourcefile);
    }
}

######################################################
# Replacing one variable in patchinfo file
######################################################

sub replace_one_variable_in_file
{
    my ( $file, $placeholder, $value ) = @_;

    for ( my $i = 0; $i <= $#{$file}; $i++ )
    {
        ${$file}[$i] =~ s/$placeholder/$value/g;
    }
}

######################################################
# Setting variables in the patchinfo file
######################################################

sub set_patchinfo
{
    my ( $patchinfofile, $patchid, $allvariables ) = @_;

    # Setting: PATCHIDPLACEHOLDER and ARCHITECTUREPLACEHOLDER and PATCHCORRECTSPLACEHOLDER

    replace_one_variable_in_file($patchinfofile, "PATCHIDPLACEHOLDER", $patchid);

    my $architecture = "";
    if ( $installer::globals::issolarissparcbuild ) { $architecture = "sparc"; }
    if ( $installer::globals::issolarisx86build ) { $architecture = "i386"; }

    replace_one_variable_in_file($patchinfofile, "ARCHITECTUREPLACEHOLDER", $architecture);

    if ( ! $allvariables->{'SOLARISPATCHCORRECTS'} ) { installer::exiter::exit_program("ERROR: No setting for PATCH_CORRECTS in zip list file!", "set_patchinfo"); }
    my $patchcorrects = $allvariables->{'SOLARISPATCHCORRECTS'};

    replace_one_variable_in_file($patchinfofile, "PATCHCORRECTSPLACEHOLDER", $patchcorrects);

    # Setting also PATCH_REQUIRES in patch info file, if entry in zip list file exists
    my $requiresstring = "";
    if ( $installer::globals::issolarissparcbuild ) { $requiresstring = "SOLSPARCPATCHREQUIRES"; }
    if ( $installer::globals::issolarisx86build ) { $requiresstring = "SOLIAPATCHREQUIRES"; }

    if ( $allvariables->{$requiresstring} )
    {
        my $newline = "PATCH_REQUIRES=\"" . $allvariables->{$requiresstring} . "\"" . "\n";
        push(@{$patchinfofile}, $newline);
    }
}

######################################################
# Finalizing patch: Renaming directory and
# including additional patch files.
######################################################

sub finalize_patch
{
    my ( $newepmdir, $allvariables ) = @_;

    my $patchidname = "SOLSPARCPATCHID";
    if ( $installer::globals::issolarisx86build ) { $patchidname = "SOLIAPATCHID"; }

    if ( ! $allvariables->{$patchidname} ) { installer::exiter::exit_program("ERROR: Variable $patchidname not defined in zip list file!", "finalize_patch"); }
    my $patchid = $allvariables->{$patchidname};
    installer::systemactions::rename_directory($newepmdir, $patchid);

    # Copying all typical patch files into the patch directory
    # All patch file names are stored in @installer::globals::solarispatchfiles
    # Location of the file is $installer::globals::patchincludepath

    my $sourcepath = $installer::globals::patchincludepath;
    $sourcepath =~ s/\/\s*$//;

    for ( my $i = 0; $i <= $#installer::globals::solarispatchfiles; $i++ )
    {
        my $sourcefile = $sourcepath . $installer::globals::separator . $installer::globals::solarispatchfiles[$i];
        my $destfile = $patchid . $installer::globals::separator . $installer::globals::solarispatchfiles[$i];
        installer::systemactions::copy_one_file($sourcefile, $destfile);
    }

    # And editing the patchinfo file

    my $patchinfofilename = $patchid . $installer::globals::separator . "patchinfo";
    my $patchinfofile = installer::files::read_file($patchinfofilename);
    set_patchinfo($patchinfofile, $patchid, $allvariables);
    installer::files::save_file($patchinfofilename, $patchinfofile);
}

######################################################
# Finalizing Linux patch: Renaming directory and
# including additional patch files.
######################################################

sub finalize_linux_patch
{
    my ( $newepmdir, $allvariables, $includepatharrayref ) = @_;

    # Copying the setup into the patch directory
    # and including the list of RPMs into it

    print "... creating patch setup ...\n";

    installer::logger::include_header_into_logfile("Creating Linux patch setup:");

    # find and read setup script template

    my $scriptfilename = "linuxpatchscript.sh";
    my $scriptref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$scriptfilename, $includepatharrayref, 0);
    if ($$scriptref eq "") { installer::exiter::exit_program("ERROR: Could not find patch script template $scriptfilename!", "finalize_linux_patch"); }
    my $scriptfile = installer::files::read_file($$scriptref);

    $installer::logger::Lang->printf("Found  script file %s: %s \n", $scriptfilename, $$scriptref);

    # Collecting all RPMs in the patch directory

    my $fileextension = "rpm";
    my $rpmfiles = installer::systemactions::find_file_with_file_extension($fileextension, $newepmdir);
    if ( ! ( $#{$rpmfiles} > -1 )) { installer::exiter::exit_program("ERROR: Could not find rpm in directory $newepmdir!", "finalize_linux_patch"); }
    for ( my $i = 0; $i <= $#{$rpmfiles}; $i++ ) { installer::pathanalyzer::make_absolute_filename_to_relative_filename(\${$rpmfiles}[$i]); }

#   my $installline = "";
#
#   for ( my $i = 0; $i <= $#{$rpmfiles}; $i++ )
#   {
#       $installline = $installline . "  rpm --prefix \$PRODUCTINSTALLLOCATION -U $newepmdir/${$rpmfiles}[$i]\n";
#   }
#
#   $installline =~ s/\s*$//;
#
#   for ( my $j = 0; $j <= $#{$scriptfile}; $j++ )
#   {
#       ${$scriptfile}[$j] =~ s/INSTALLLINES/$installline/;
#   }

    # Searching packagename containing -core01
    my $found_package = 0;
    my $searchpackagename = "";
    for ( my $i = 0; $i <= $#{$rpmfiles}; $i++ )
    {
        if ( ${$rpmfiles}[$i] =~ /-core01-/ )
        {
            $searchpackagename = ${$rpmfiles}[$i];
            $found_package = 1;
            if ( $searchpackagename =~ /^\s*(.*?-core01)-.*/ ) { $searchpackagename = $1; }
            last;
        }
    }

    if ( ! $found_package ) { installer::exiter::exit_program("ERROR: No package containing \"-core01\" found in directory \"$newepmdir\"", "finalize_linux_patch"); }

    # Replacing the searchpackagename
    for ( my $j = 0; $j <= $#{$scriptfile}; $j++ ) { ${$scriptfile}[$j] =~ s/SEARCHPACKAGENAMEPLACEHOLDER/$searchpackagename/; }

    # Setting the PRODUCTDIRECTORYNAME to $installer::globals::officedirhostname
    for ( my $j = 0; $j <= $#{$scriptfile}; $j++ ) { ${$scriptfile}[$j] =~ s/PRODUCTDIRECTORYNAME/$installer::globals::officedirhostname/; }

    # Replacing the productname
    my $productname = $allvariables->{'PRODUCTNAME'};
    $productname = lc($productname);
    $productname =~ s/ /_/g;    # abc office -> abc_office

    $installer::logger::Lang->printf("Adding productname %s into Linux patch script\n", $productname);

    for ( my $j = 0; $j <= $#{$scriptfile}; $j++ ) { ${$scriptfile}[$j] =~ s/PRODUCTNAMEPLACEHOLDER/$productname/; }

    # Saving the file

    my $newscriptfilename = "setup"; # $newepmdir . $installer::globals::separator . "setup";
    installer::files::save_file($newscriptfilename, $scriptfile);

    $installer::logger::Lang->printf("Saved Linux patch setup %s\n", $newscriptfilename);

    # Setting unix rights 755
    my $localcall = "chmod 775 $newscriptfilename \>\/dev\/null 2\>\&1";
    system($localcall);
}

1;