xref: /trunk/main/svl/source/numbers/numhead.cxx (revision 40df464ee80f942fd2baf5effc726656f4be12a0)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svl.hxx"
#ifndef GCC
#endif
#include <tools/debug.hxx>

#include "numhead.hxx"

//      ID's fuer Dateien:
#define SV_NUMID_SIZES                      0x4200

// STATIC DATA -----------------------------------------------------------

//SEG_EOFGLOBALS()

// =======================================================================
/*                              wird fuer SvNumberformatter nicht gebraucht
//#pragma SEG_FUNCDEF(numhead_01)

SvNumReadHeader::SvNumReadHeader(SvStream& rNewStream) :
    rStream( rNewStream )
{
    sal_uLong nDataSize;
    rStream >> nDataSize;
    nDataEnd = rStream.Tell() + nDataSize;
}

//#pragma SEG_FUNCDEF(numhead_02)

SvNumReadHeader::~SvNumReadHeader()
{
    sal_uLong nReadEnd = rStream.Tell();
    DBG_ASSERT( nReadEnd <= nDataEnd, "zuviele Bytes gelesen" );
    if ( nReadEnd != nDataEnd )
        rStream.Seek(nDataEnd);                     // Rest ueberspringen
}

//#pragma SEG_FUNCDEF(numhead_03)

sal_uLong SvNumReadHeader::BytesLeft() const
{
    sal_uLong nReadEnd = rStream.Tell();
    if (nReadEnd <= nDataEnd)
        return nDataEnd-nReadEnd;

    DBG_ERROR("Fehler bei SvNumReadHeader::BytesLeft");
    return 0;
}

// -----------------------------------------------------------------------

//#pragma SEG_FUNCDEF(numhead_04)

SvNumWriteHeader::SvNumWriteHeader(SvStream& rNewStream, sal_uLong nDefault) :
    rStream( rNewStream )
{
    nDataSize = nDefault;
    rStream << nDataSize;
    nDataPos = rStream.Tell();
}

//#pragma SEG_FUNCDEF(numhead_05)

SvNumWriteHeader::~SvNumWriteHeader()
{
    sal_uLong nPos = rStream.Tell();

    if ( nPos - nDataPos != nDataSize )             // Default getroffen?
    {
        nDataSize = nPos - nDataPos;
        rStream.Seek(nDataPos - sizeof(sal_uInt32));
        rStream << nDataSize;                       // Groesse am Anfang eintragen
        rStream.Seek(nPos);
    }
}
*/

// =======================================================================

//#pragma SEG_FUNCDEF(numhead_06)

//! mit Skip() synchron
ImpSvNumMultipleReadHeader::ImpSvNumMultipleReadHeader(SvStream& rNewStream) :
    rStream( rNewStream )
{
    sal_uInt32 nDataSize;
    rStream >> nDataSize;
    sal_uLong nDataPos = rStream.Tell();
    nEntryEnd = nDataPos;

    rStream.SeekRel(nDataSize);
    sal_uInt16 nID;
    rStream >> nID;
    if (nID != SV_NUMID_SIZES)
    {
        DBG_ERROR("SV_NUMID_SIZES nicht gefunden");
    }
    sal_uInt32 nSizeTableLen;
    rStream >> nSizeTableLen;
    pBuf = new char[nSizeTableLen];
    rStream.Read( pBuf, nSizeTableLen );
    pMemStream = new SvMemoryStream( pBuf, nSizeTableLen, STREAM_READ );

    nEndPos = rStream.Tell();
    rStream.Seek( nDataPos );
}

//#pragma SEG_FUNCDEF(numhead_07)

ImpSvNumMultipleReadHeader::~ImpSvNumMultipleReadHeader()
{
    DBG_ASSERT( pMemStream->Tell() == pMemStream->GetEndOfData(),
                "Sizes nicht vollstaendig gelesen" );
    delete pMemStream;
    delete [] pBuf;

    rStream.Seek(nEndPos);
}

//! mit ctor synchron
// static
void ImpSvNumMultipleReadHeader::Skip( SvStream& rStream )
{
    sal_uInt32 nDataSize;
    rStream >> nDataSize;
    rStream.SeekRel( nDataSize );
    sal_uInt16 nID;
    rStream >> nID;
    if ( nID != SV_NUMID_SIZES )
    {
        DBG_ERROR("SV_NUMID_SIZES nicht gefunden");
    }
    sal_uInt32 nSizeTableLen;
    rStream >> nSizeTableLen;
    rStream.SeekRel( nSizeTableLen );
}

//#pragma SEG_FUNCDEF(numhead_08)

void ImpSvNumMultipleReadHeader::EndEntry()
{
    sal_uLong nPos = rStream.Tell();
    DBG_ASSERT( nPos <= nEntryEnd, "zuviel gelesen" );
    if ( nPos != nEntryEnd )
        rStream.Seek( nEntryEnd );          // Rest ueberspringen
}

//#pragma SEG_FUNCDEF(numhead_0d)

void ImpSvNumMultipleReadHeader::StartEntry()
{
    sal_uLong nPos = rStream.Tell();
    sal_uInt32 nEntrySize;
    (*pMemStream) >> nEntrySize;

    nEntryEnd = nPos + nEntrySize;
}

//#pragma SEG_FUNCDEF(numhead_09)

sal_uLong ImpSvNumMultipleReadHeader::BytesLeft() const
{
    sal_uLong nReadEnd = rStream.Tell();
    if (nReadEnd <= nEntryEnd)
        return nEntryEnd-nReadEnd;

    DBG_ERROR("Fehler bei ImpSvNumMultipleReadHeader::BytesLeft");
    return 0;
}

// -----------------------------------------------------------------------

//#pragma SEG_FUNCDEF(numhead_0a)

ImpSvNumMultipleWriteHeader::ImpSvNumMultipleWriteHeader(SvStream& rNewStream,
                                                   sal_uLong nDefault) :
    rStream( rNewStream ),
    aMemStream( 4096, 4096 )
{
    nDataSize = nDefault;
    rStream << nDataSize;

    nDataPos = rStream.Tell();
    nEntryStart = nDataPos;
}

//#pragma SEG_FUNCDEF(numhead_0b)

ImpSvNumMultipleWriteHeader::~ImpSvNumMultipleWriteHeader()
{
    sal_uLong nDataEnd = rStream.Tell();

    rStream << (sal_uInt16) SV_NUMID_SIZES;
    rStream << static_cast<sal_uInt32>(aMemStream.Tell());
    rStream.Write( aMemStream.GetData(), aMemStream.Tell() );

    if ( nDataEnd - nDataPos != nDataSize )                 // Default getroffen?
    {
        nDataSize = nDataEnd - nDataPos;
        sal_uLong nPos = rStream.Tell();
        rStream.Seek(nDataPos-sizeof(sal_uInt32));
        rStream << nDataSize;                               // Groesse am Anfang eintragen
        rStream.Seek(nPos);
    }
}

//#pragma SEG_FUNCDEF(numhead_0c)

void ImpSvNumMultipleWriteHeader::EndEntry()
{
    sal_uLong nPos = rStream.Tell();
    aMemStream << static_cast<sal_uInt32>(nPos - nEntryStart);
}

//#pragma SEG_FUNCDEF(numhead_0e)

void ImpSvNumMultipleWriteHeader::StartEntry()
{
    sal_uLong nPos = rStream.Tell();
    nEntryStart = nPos;
}