xref: /trunk/main/sw/source/ui/frmdlg/frmmgr.cxx (revision 3f09c2ce83c31bec9519173e2b25b00b5abfc6a1)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#include "cmdid.h"
#include "hintids.hxx"

#include <svl/stritem.hxx>
#include <editeng/protitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/opaqitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/shaditem.hxx>
#include <svx/swframevalidation.hxx>
#include <svx/xdef.hxx>
#include <fmtclds.hxx>
#include "wrtsh.hxx"
#include "view.hxx"
#include "viewopt.hxx"
#include "uitool.hxx"
#include "frmmgr.hxx"
#include "format.hxx"
#include "mdiexp.hxx"
#include "poolfmt.hxx"
#include <com/sun/star/text/TextContentAnchorType.hpp>
#include <com/sun/star/text/HoriOrientation.hpp>
#include <com/sun/star/text/VertOrientation.hpp>
#include <com/sun/star/text/RelOrientation.hpp>

using namespace ::com::sun::star;
//using namespace text;

static sal_uInt16 __FAR_DATA aFrmMgrRange[] = {
                            RES_FRMATR_BEGIN, RES_FRMATR_END-1,

                            //UUUU FillAttribute support
                            XATTR_FILL_FIRST, XATTR_FILL_LAST,

                            SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER,
                            FN_SET_FRM_NAME, FN_SET_FRM_NAME,
                            0};

/*--------------------------------------------------------------------
     Beschreibung: Rahmen-Attribute ueber Shell ermitteln
 --------------------------------------------------------------------*/

SwFlyFrmAttrMgr::SwFlyFrmAttrMgr( sal_Bool bNew, SwWrtShell* pSh, sal_uInt8 nType ) :
    aSet( (SwAttrPool&)pSh->GetAttrPool(), aFrmMgrRange ),
    pOwnSh( pSh ),
    bAbsPos( sal_False ),
    bNewFrm( bNew ),
    bIsInVertical( sal_False ),
    bIsInVerticalL2R( sal_False )
{
    if ( bNewFrm )
    {
        // Defaults einstellen:
        sal_uInt16 nId = 0;
        switch ( nType )
        {
            case FRMMGR_TYPE_TEXT:  nId = RES_POOLFRM_FRAME;    break;
            case FRMMGR_TYPE_OLE:   nId = RES_POOLFRM_OLE;      break;
            case FRMMGR_TYPE_GRF:   nId = RES_POOLFRM_GRAPHIC;  break;
        }
        aSet.SetParent( &pOwnSh->GetFmtFromPool( nId )->GetAttrSet());
        aSet.Put( SwFmtFrmSize( ATT_MIN_SIZE, DFLT_WIDTH, DFLT_HEIGHT ));
        if ( 0 != ::GetHtmlMode(pSh->GetView().GetDocShell()) )
            aSet.Put( SwFmtHoriOrient( 0, text::HoriOrientation::LEFT, text::RelOrientation::PRINT_AREA ) );
    }
    else if ( nType == FRMMGR_TYPE_NONE )
    {
        pOwnSh->GetFlyFrmAttr( aSet );
        sal_Bool bRightToLeft;
        bIsInVertical = pOwnSh->IsFrmVertical(sal_True, bRightToLeft, bIsInVerticalL2R);
    }
    ::PrepareBoxInfo( aSet, *pOwnSh );
}

SwFlyFrmAttrMgr::SwFlyFrmAttrMgr( sal_Bool bNew, SwWrtShell* pSh, const SfxItemSet &rSet ) :
    aSet( rSet ),
    pOwnSh( pSh ),
    bAbsPos( sal_False ),
    bNewFrm( bNew ),
    bIsInVertical(sal_False),
    bIsInVerticalL2R(sal_False)
{
    if(!bNew)
    {
        sal_Bool bRightToLeft;
        bIsInVertical = pSh->IsFrmVertical(sal_True, bRightToLeft, bIsInVerticalL2R);
    }
}


/*--------------------------------------------------------------------
     Beschreibung:  Initialisieren
 --------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::UpdateAttrMgr()
{
    if ( !bNewFrm && pOwnSh->IsFrmSelected() )
        pOwnSh->GetFlyFrmAttr( aSet );
    ::PrepareBoxInfo( aSet, *pOwnSh );
}

void SwFlyFrmAttrMgr::_UpdateFlyFrm()
{
    const SfxPoolItem* pItem = 0;

    if (aSet.GetItemState(FN_SET_FRM_NAME, sal_False, &pItem) == SFX_ITEM_SET)
        pOwnSh->SetFlyName(((SfxStringItem *)pItem)->GetValue());

    pOwnSh->SetModified();

    if ( bAbsPos )
    {
        pOwnSh->SetFlyPos( aAbsPos );
        bAbsPos = sal_False;
    }
}

/*--------------------------------------------------------------------
    Beschreibung: Bestehenden Fly-Frame aendern
 --------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::UpdateFlyFrm()
{
    ASSERT( pOwnSh->IsFrmSelected(),
        "Kein Rahmen selektiert oder keine Shell, Update nicht moeglich");

    if( pOwnSh->IsFrmSelected() )
    {
        //JP 6.8.2001: set never an invalid anchor into the core.
        const SfxPoolItem *pGItem, *pItem;
        if( SFX_ITEM_SET == aSet.GetItemState( RES_ANCHOR, sal_False, &pItem ))
        {
            SfxItemSet aGetSet( *aSet.GetPool(), RES_ANCHOR, RES_ANCHOR );
            if( pOwnSh->GetFlyFrmAttr( aGetSet ) && 1 == aGetSet.Count() &&
                SFX_ITEM_SET == aGetSet.GetItemState( RES_ANCHOR, sal_False, &pGItem )
                && ((SwFmtAnchor*)pGItem)->GetAnchorId() ==
                   ((SwFmtAnchor*)pItem)->GetAnchorId() )
                aSet.ClearItem( RES_ANCHOR );
        }

        // return wg. BASIC
        if( aSet.Count() )
        {
            pOwnSh->StartAllAction();
            pOwnSh->SetFlyFrmAttr( aSet );
            _UpdateFlyFrm();
            pOwnSh->EndAllAction();
        }
    }
}

/*--------------------------------------------------------------------
     Beschreibung:  Rahmen einfuegen
 --------------------------------------------------------------------*/

sal_Bool SwFlyFrmAttrMgr::InsertFlyFrm()
{
    pOwnSh->StartAllAction();

    sal_Bool bRet = 0 != pOwnSh->NewFlyFrm( aSet );

    // richtigen Mode an der Shell einschalten, Rahmen wurde aut. selektiert.
    if ( bRet )
    {
        _UpdateFlyFrm();
        pOwnSh->EnterSelFrmMode();
        FrameNotify(pOwnSh, FLY_DRAG_START);
    }
    pOwnSh->EndAllAction();
    return bRet;
}

/*------------------------------------------------------------------------
 Beschreibung:  Rahmen des Typs eAnchorType einfuegen. Position und
                Groesse werden explizit angegeben.
                Nicht erlaubte Werte des Aufzaehlungstypes werden
                korrigiert.
------------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::InsertFlyFrm(RndStdIds    eAnchorType,
                                   const Point  &rPos,
                                   const Size   &rSize,
                                   sal_Bool bAbs )
{
    ASSERT( eAnchorType == FLY_AT_PAGE ||
            eAnchorType == FLY_AT_PARA ||
            eAnchorType == FLY_AT_CHAR ||
            eAnchorType == FLY_AT_FLY  ||
            eAnchorType == FLY_AS_CHAR,     "invalid frame type" );

    if ( bAbs )
        SetAbsPos( rPos );
    else
        SetPos( rPos );

    SetSize( rSize );
    SetAnchor( eAnchorType );
    InsertFlyFrm();
}

/*--------------------------------------------------------------------
     Beschreibung:  Anker setzen
 --------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::SetAnchor( RndStdIds eId )
{
    sal_uInt16 nPhyPageNum, nVirtPageNum;
    pOwnSh->GetPageNum( nPhyPageNum, nVirtPageNum );

    aSet.Put( SwFmtAnchor( eId, nPhyPageNum ) );
    if ((FLY_AT_PAGE == eId) || (FLY_AT_PARA == eId) || (FLY_AT_CHAR == eId)
        || (FLY_AT_FLY == eId))
    {
        SwFmtVertOrient aVertOrient( GetVertOrient() );
        SwFmtHoriOrient aHoriOrient( GetHoriOrient() );
        aHoriOrient.SetRelationOrient( text::RelOrientation::FRAME );
        aVertOrient.SetRelationOrient( text::RelOrientation::FRAME );
        aSet.Put( aVertOrient );
        aSet.Put( aHoriOrient );
    }
}

/*------------------------------------------------------------------------
 Beschreibung:  Setzen des Attributs fuer Spalten
------------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::SetCol( const SwFmtCol &rCol )
{
    aSet.Put( rCol );
}
/*--------------------------------------------------------------------
     Beschreibung:  Absolute Position setzen
 --------------------------------------------------------------------*/

void SwFlyFrmAttrMgr::SetAbsPos( const Point& rPoint )
{
    bAbsPos = sal_True;
    aAbsPos = rPoint;

    SwFmtVertOrient aVertOrient( GetVertOrient() );
    SwFmtHoriOrient aHoriOrient( GetHoriOrient() );
    aHoriOrient.SetHoriOrient( text::HoriOrientation::NONE );
    aVertOrient.SetVertOrient( text::VertOrientation::NONE );
    aSet.Put( aVertOrient );
    aSet.Put( aHoriOrient );
}

/*--------------------------------------------------------------------
    Beschreibung: Metriken auf Korrektheit pruefen
 --------------------------------------------------------------------*/
void SwFlyFrmAttrMgr::ValidateMetrics( SvxSwFrameValidation& rVal,
        const SwPosition* pToCharCntntPos,
        sal_Bool bOnlyPercentRefValue )
{
    if (!bOnlyPercentRefValue)
    {
        rVal.nMinHeight = MINFLY + CalcTopSpace() + CalcBottomSpace();
        rVal.nMinWidth =  MINFLY + CalcLeftSpace()+ CalcRightSpace();
    }

    SwRect aBoundRect;

    // OD 18.09.2003 #i18732# - adjustment for allowing vertical position
    //      aligned to page for fly frame anchored to paragraph or to character.
    const RndStdIds eAnchorType = static_cast<RndStdIds >(rVal.nAnchorType);
    pOwnSh->CalcBoundRect( aBoundRect, eAnchorType,
                           rVal.nHRelOrient,
                           rVal.nVRelOrient,
                           pToCharCntntPos,
                           rVal.bFollowTextFlow,
                           rVal.bMirror, NULL, &rVal.aPercentSize);

    if (bOnlyPercentRefValue)
        return;

    // --> OD 2009-09-01 #mongolianlayout#
    if ( bIsInVertical || bIsInVerticalL2R )
    // <--
    {
        Point aPos(aBoundRect.Pos());
        long nTmp = aPos.X();
        aPos.X() = aPos.Y();
        aPos.Y() = nTmp;
        Size aSize(aBoundRect.SSize());
        nTmp = aSize.Width();
        aSize.Width() = aSize.Height();
        aSize.Height() = nTmp;
        aBoundRect.Chg( aPos, aSize );
        //exchange width/height to enable correct values
        nTmp = rVal.nWidth;
        rVal.nWidth = rVal.nHeight;
        rVal.nHeight = nTmp;
    }
    if ((eAnchorType == FLY_AT_PAGE) || (eAnchorType == FLY_AT_FLY))
    {
        // MinimalPosition
        rVal.nMinHPos = aBoundRect.Left();
        rVal.nMinVPos = aBoundRect.Top();
        SwTwips nH = rVal.nHPos;
        SwTwips nV = rVal.nVPos;

        if (rVal.nHPos + rVal.nWidth > aBoundRect.Right())
        {
            if (rVal.nHoriOrient == text::HoriOrientation::NONE)
            {
                rVal.nHPos -= ((rVal.nHPos + rVal.nWidth) - aBoundRect.Right());
                nH = rVal.nHPos;
            }
            else
                rVal.nWidth = aBoundRect.Right() - rVal.nHPos;
        }

        if (rVal.nHPos + rVal.nWidth > aBoundRect.Right())
            rVal.nWidth = aBoundRect.Right() - rVal.nHPos;

        if (rVal.nVPos + rVal.nHeight > aBoundRect.Bottom())
        {
            if (rVal.nVertOrient == text::VertOrientation::NONE)
            {
                rVal.nVPos -= ((rVal.nVPos + rVal.nHeight) - aBoundRect.Bottom());
                nV = rVal.nVPos;
            }
            else
                rVal.nHeight = aBoundRect.Bottom() - rVal.nVPos;
        }

        if (rVal.nVPos + rVal.nHeight > aBoundRect.Bottom())
            rVal.nHeight = aBoundRect.Bottom() - rVal.nVPos;

        if ( rVal.nVertOrient != text::VertOrientation::NONE )
            nV = aBoundRect.Top();

        if ( rVal.nHoriOrient != text::HoriOrientation::NONE )
            nH = aBoundRect.Left();

        rVal.nMaxHPos   = aBoundRect.Right()  - rVal.nWidth;
        rVal.nMaxHeight = aBoundRect.Bottom() - nV;

        rVal.nMaxVPos   = aBoundRect.Bottom() - rVal.nHeight;
        rVal.nMaxWidth  = aBoundRect.Right()  - nH;
    }
    // OD 12.11.2003 #i22341# - handle to character anchored objects vertical
    // aligned at character or top of line in a special case
    else if ((eAnchorType == FLY_AT_PARA) ||
                ((eAnchorType == FLY_AT_CHAR) &&
                !(rVal.nVRelOrient == text::RelOrientation::CHAR) &&
                !(rVal.nVRelOrient == text::RelOrientation::TEXT_LINE) ) )
    {
        if (rVal.nHPos + rVal.nWidth > aBoundRect.Right())
        {
            if (rVal.nHoriOrient == text::HoriOrientation::NONE)
            {
                rVal.nHPos -= ((rVal.nHPos + rVal.nWidth) - aBoundRect.Right());
            }
            else
                rVal.nWidth = aBoundRect.Right() - rVal.nHPos;
        }

        // OD 29.09.2003 #i17567#, #i18732# - consider following the text flow
        // and alignment at page areas.
        const bool bMaxVPosAtBottom = !rVal.bFollowTextFlow ||
                                      rVal.nVRelOrient == text::RelOrientation::PAGE_FRAME ||
                                      rVal.nVRelOrient == text::RelOrientation::PAGE_PRINT_AREA;
        {
            SwTwips nTmpMaxVPos = ( bMaxVPosAtBottom
                                    ? aBoundRect.Bottom()
                                    : aBoundRect.Height() ) -
                                  rVal.nHeight;
            if ( rVal.nVPos > nTmpMaxVPos )
            {
                if (rVal.nVertOrient == text::VertOrientation::NONE)
                {
                    rVal.nVPos = nTmpMaxVPos;
                }
                else
                {
                    rVal.nHeight = ( bMaxVPosAtBottom
                                     ? aBoundRect.Bottom()
                                     : aBoundRect.Height() ) - rVal.nVPos;
                }
            }
        }

        rVal.nMinHPos  = aBoundRect.Left();
        rVal.nMaxHPos  = aBoundRect.Right() - rVal.nWidth;

        rVal.nMinVPos  = aBoundRect.Top();
        // OD 26.09.2003 #i17567#, #i18732# - determine maximum vertical position
        if ( bMaxVPosAtBottom )
        {
            rVal.nMaxVPos  = aBoundRect.Bottom() - rVal.nHeight;
        }
        else
        {
            rVal.nMaxVPos  = aBoundRect.Height() - rVal.nHeight;
        }

        // Maximale Breite Hoehe
        const SwTwips nH = ( rVal.nHoriOrient != text::HoriOrientation::NONE )
                           ? aBoundRect.Left()
                           : rVal.nHPos;
        const SwTwips nV = ( rVal.nVertOrient != text::VertOrientation::NONE )
                           ? aBoundRect.Top()
                           : rVal.nVPos;
        rVal.nMaxHeight  = rVal.nMaxVPos + rVal.nHeight - nV;
        rVal.nMaxWidth   = rVal.nMaxHPos + rVal.nWidth - nH;
    }
    // OD 12.11.2003 #i22341# - special case for to character anchored objects
    // vertical aligned at character or top of line.
    // Note: (1) positive vertical values are positions above the top of line
    //       (2) negative vertical values are positions below the top of line
    else if ( (eAnchorType == FLY_AT_CHAR) &&
              ( rVal.nVRelOrient == text::RelOrientation::CHAR ||
                rVal.nVRelOrient == text::RelOrientation::TEXT_LINE ) )
    {
        // determine horizontal values
        rVal.nMinHPos  = aBoundRect.Left();

        rVal.nMaxHPos  = aBoundRect.Right() - rVal.nWidth;
        if (rVal.nHPos + rVal.nWidth > aBoundRect.Right())
        {
            if (rVal.nHoriOrient == text::HoriOrientation::NONE)
            {
                rVal.nHPos -= ((rVal.nHPos + rVal.nWidth) - aBoundRect.Right());
            }
            else
                rVal.nWidth = aBoundRect.Right() - rVal.nHPos;
        }

        const SwTwips nH = ( rVal.nHoriOrient != text::HoriOrientation::NONE )
                           ? aBoundRect.Left()
                           : rVal.nHPos;
        rVal.nMaxWidth   = rVal.nMaxHPos + rVal.nWidth - nH;

        // determine vertical values
        rVal.nMinVPos = -( aBoundRect.Bottom() - rVal.nHeight );
        if ( rVal.nVPos < rVal.nMinVPos &&
             rVal.nVertOrient == text::VertOrientation::NONE )
        {
            rVal.nVPos = rVal.nMinVPos;
        }

        rVal.nMaxVPos  = -aBoundRect.Top();
        if ( rVal.nVPos > rVal.nMaxVPos &&
             rVal.nVertOrient == text::VertOrientation::NONE )
        {
            rVal.nVPos = rVal.nMaxVPos;
        }

        if ( rVal.nVertOrient == text::VertOrientation::NONE )
        {
            rVal.nMaxHeight = aBoundRect.Bottom() + rVal.nVPos;
        }
        else
        {
            rVal.nMaxHeight = aBoundRect.Height();
        }
    }
    else if ( eAnchorType == FLY_AS_CHAR )
    {
        rVal.nMinHPos = 0;
        rVal.nMaxHPos = 0;

        rVal.nMaxHeight = aBoundRect.Height();
        rVal.nMaxWidth  = aBoundRect.Width();

        rVal.nMaxVPos   = aBoundRect.Height();
        rVal.nMinVPos   = -aBoundRect.Height() + rVal.nHeight;
        if (rVal.nMaxVPos < rVal.nMinVPos)
        {
            rVal.nMinVPos = rVal.nMaxVPos;
            rVal.nMaxVPos = -aBoundRect.Height();
        }
    }
    // --> OD 2009-09-01 #mongolianlayout#
    if ( bIsInVertical || bIsInVerticalL2R )
    // <--
    {
        //restore width/height exchange
        long nTmp = rVal.nWidth;
        rVal.nWidth = rVal.nHeight;
        rVal.nHeight = nTmp;
    }

    if (rVal.nMaxWidth < rVal.nWidth)
        rVal.nWidth = rVal.nMaxWidth;
    if (rVal.nMaxHeight < rVal.nHeight)
        rVal.nHeight = rVal.nMaxHeight;
}

/*--------------------------------------------------------------------
    Beschreibung: Korrektur fuer Umrandung
 --------------------------------------------------------------------*/

SwTwips SwFlyFrmAttrMgr::CalcTopSpace()
{
    const SvxShadowItem& rShadow = GetShadow();
    const SvxBoxItem&    rBox    = GetBox();
    return rShadow.CalcShadowSpace(SHADOW_TOP ) + rBox.CalcLineSpace(BOX_LINE_TOP);
}

SwTwips SwFlyFrmAttrMgr::CalcBottomSpace()
{
    const SvxShadowItem& rShadow = GetShadow();
    const SvxBoxItem& rBox       = GetBox();
    return rShadow.CalcShadowSpace(SHADOW_BOTTOM) + rBox.CalcLineSpace(BOX_LINE_BOTTOM);
}

SwTwips SwFlyFrmAttrMgr::CalcLeftSpace()
{
    const SvxShadowItem& rShadow = GetShadow();
    const SvxBoxItem&    rBox    = GetBox();
    return rShadow.CalcShadowSpace(SHADOW_LEFT) + rBox.CalcLineSpace(BOX_LINE_LEFT);
}

SwTwips SwFlyFrmAttrMgr::CalcRightSpace()
{
    const SvxShadowItem& rShadow = GetShadow();
    const SvxBoxItem&    rBox    = GetBox();
    return rShadow.CalcShadowSpace(SHADOW_RIGHT) + rBox.CalcLineSpace(BOX_LINE_RIGHT);
}


/*--------------------------------------------------------------------
    Beschreibung: Attribut aus dem Set loeschen
 --------------------------------------------------------------------*/
void SwFlyFrmAttrMgr::DelAttr( sal_uInt16 nId )
{
    aSet.ClearItem( nId );
}

void SwFlyFrmAttrMgr::SetLRSpace( long nLeft, long nRight )
{
    ASSERT( LONG_MAX != nLeft && LONG_MAX != nRight, "Welchen Raend setzen?" );

    SvxLRSpaceItem aTmp( (SvxLRSpaceItem&)aSet.Get( RES_LR_SPACE ) );
    if( LONG_MAX != nLeft )
        aTmp.SetLeft( sal_uInt16(nLeft) );
    if( LONG_MAX != nRight )
        aTmp.SetRight( sal_uInt16(nRight) );
    aSet.Put( aTmp );
}

void SwFlyFrmAttrMgr::SetULSpace( long nTop, long nBottom )
{
    ASSERT(LONG_MAX != nTop && LONG_MAX != nBottom, "Welchen Raend setzen?" );

    SvxULSpaceItem aTmp( (SvxULSpaceItem&)aSet.Get( RES_UL_SPACE ) );
    if( LONG_MAX != nTop )
        aTmp.SetUpper( sal_uInt16(nTop) );
    if( LONG_MAX != nBottom )
        aTmp.SetLower( sal_uInt16(nBottom) );
    aSet.Put( aTmp );
}

void SwFlyFrmAttrMgr::SetPos( const Point& rPoint )
{
    SwFmtVertOrient aVertOrient( GetVertOrient() );
    SwFmtHoriOrient aHoriOrient( GetHoriOrient() );

    aHoriOrient.SetPos       ( rPoint.X() );
    aHoriOrient.SetHoriOrient( text::HoriOrientation::NONE  );

    aVertOrient.SetPos       ( rPoint.Y() );
    aVertOrient.SetVertOrient( text::VertOrientation::NONE  );

    aSet.Put( aVertOrient );
    aSet.Put( aHoriOrient );
}

void SwFlyFrmAttrMgr::SetHorzOrientation( sal_Int16 eOrient )
{
    SwFmtHoriOrient aHoriOrient( GetHoriOrient() );
    aHoriOrient.SetHoriOrient( eOrient );
    aSet.Put( aHoriOrient );
}

void SwFlyFrmAttrMgr::SetVertOrientation( sal_Int16 eOrient )
{
    SwFmtVertOrient aVertOrient( GetVertOrient() );
    aVertOrient.SetVertOrient( eOrient );
    aSet.Put( aVertOrient );
}

void SwFlyFrmAttrMgr::SetHeightSizeType( SwFrmSize eType )
{
    SwFmtFrmSize aSize( GetFrmSize() );
    aSize.SetHeightSizeType( eType );
    aSet.Put( aSize );
}

void SwFlyFrmAttrMgr::SetSize( const Size& rSize )
{
    SwFmtFrmSize aSize( GetFrmSize() );
    aSize.SetSize(Size(Max(rSize.Width(), long(MINFLY)), Max(rSize.Height(), long(MINFLY))));
    aSet.Put( aSize );
}

void SwFlyFrmAttrMgr::SetAttrSet(const SfxItemSet& rSet)
{
    aSet.ClearItem();
    aSet.Put( rSet );
}