1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sw.hxx"
26
27
28 #include <string> // HACK: prevent conflict between STLPORT and Workshop headers
29 #include <stdlib.h>
30 #include <hintids.hxx>
31 #include <rtl/logfile.hxx>
32 #include <vcl/graph.hxx>
33 #include <vcl/inputctx.hxx>
34 #include <basic/sbxobj.hxx>
35 #include <svl/eitem.hxx>
36 #include <unotools/undoopt.hxx>
37 #include <unotools/lingucfg.hxx>
38 #include <unotools/useroptions.hxx>
39 #include <sfx2/dispatch.hxx>
40 #include <sfx2/request.hxx>
41 #include <sfx2/docfile.hxx>
42 #include <sfx2/printer.hxx>
43 #include <sfx2/app.hxx>
44 #include <svx/ruler.hxx>
45 #include <editeng/protitem.hxx>
46 #include <svx/fmshell.hxx>
47 #include <svx/extrusionbar.hxx>
48 #include <svx/fontworkbar.hxx>
49 #include <unotxvw.hxx>
50 #include <cmdid.h>
51 #include <swhints.hxx>
52 #include <swmodule.hxx>
53 #include <inputwin.hxx>
54 #include <chartins.hxx>
55 #include <uivwimp.hxx>
56 #include <uitool.hxx>
57 #include <edtwin.hxx>
58 #include <textsh.hxx>
59 #include <listsh.hxx>
60 #include <tabsh.hxx>
61 #include <grfsh.hxx>
62 #include <mediash.hxx>
63 #include <docsh.hxx>
64 #include <frmsh.hxx>
65 #include <olesh.hxx>
66 #include <drawsh.hxx>
67 #include <drawbase.hxx>
68 #include <drformsh.hxx>
69 #include <drwtxtsh.hxx>
70 #include <beziersh.hxx>
71 #include <globdoc.hxx>
72 #include <scroll.hxx>
73 #include <navipi.hxx>
74 #include <gloshdl.hxx>
75 #include <usrpref.hxx>
76 #include <srcview.hxx>
77 #include <doc.hxx>
78 #include <IDocumentUndoRedo.hxx>
79 #include <drawdoc.hxx>
80 #include <wdocsh.hxx>
81 #include <wview.hxx>
82 #include <workctrl.hxx>
83 #include <wrtsh.hxx>
84 #include <barcfg.hxx>
85 #include <pview.hxx>
86 #include <swdtflvr.hxx>
87 #include <view.hrc>
88 #include <globdoc.hrc>
89 #include <frmui.hrc>
90 #include <cfgitems.hxx>
91 #include <prtopt.hxx>
92 #include <linguistic/lngprops.hxx>
93 #include <editeng/unolingu.hxx>
94 //#include <sfx2/app.hxx>
95 #include <com/sun/star/frame/FrameSearchFlag.hpp>
96 #include <com/sun/star/scanner/ScannerContext.hpp>
97 #include <com/sun/star/scanner/XScannerManager.hpp>
98 #include <toolkit/helper/vclunohelper.hxx>
99 #include <rtl/ustrbuf.hxx>
100 #include <xmloff/xmluconv.hxx>
101
102 #include "formatclipboard.hxx"
103 #include <PostItMgr.hxx>
104 #include <annotsh.hxx>
105
106 #include <fldbas.hxx>
107
108 #include <unomid.h>
109
110 #include <com/sun/star/document/XDocumentProperties.hpp>
111 #include <com/sun/star/document/XDocumentPropertiesSupplier.hpp>
112
113
114 using namespace ::com::sun::star;
115 using namespace ::com::sun::star::uno;
116 using namespace ::com::sun::star::lang;
117 using namespace ::com::sun::star::scanner;
118 using ::rtl::OUString;
119 using ::rtl::OUStringBuffer;
120
121
122 extern sal_Bool bNoInterrupt; // in mainwn.cxx
123
124 #define SWVIEWFLAGS ( SFX_VIEW_CAN_PRINT| \
125 SFX_VIEW_HAS_PRINTOPTIONS)
126
127 /*--------------------------------------------------------------------
128 Description: statics
129 --------------------------------------------------------------------*/
130
131 int bDocSzUpdated = 1;
132
133 SvxSearchItem* SwView::pSrchItem = 0;
134
135 sal_uInt16 SwView::nInsertCtrlState = FN_INSERT_TABLE;
136 sal_uInt16 SwView::nWebInsertCtrlState = FN_INSERT_TABLE;
137 sal_uInt16 SwView::nInsertObjectCtrlState = SID_INSERT_DIAGRAM;
138
139 sal_Bool SwView::bExtra = sal_False;
140 sal_Bool SwView::bFound = sal_False;
141 sal_Bool SwView::bJustOpened = sal_False;
142
143
144 SvxSearchDialog* SwView::pSrchDlg = 0;
145 SearchAttrItemList* SwView::pSrchList = 0;
146 SearchAttrItemList* SwView::pReplList = 0;
147
DBG_NAME(viewhdl)148 DBG_NAME(viewhdl)
149
150 /*--------------------------------------------------------------------
151 Description:
152 --------------------------------------------------------------------*/
153
154 inline SfxDispatcher &SwView::GetDispatcher()
155 {
156 return *GetViewFrame()->GetDispatcher();
157 }
158
159 /*--------------------------------------------------------------------
160 Description:
161 --------------------------------------------------------------------*/
162
ImpSetVerb(int nSelType)163 void SwView::ImpSetVerb( int nSelType )
164 {
165 sal_Bool bResetVerbs = bVerbsActive;
166 if ( !GetViewFrame()->GetFrame().IsInPlace() &&
167 (nsSelectionType::SEL_OLE|nsSelectionType::SEL_GRF) & nSelType )
168 {
169 if ( !pWrtShell->IsSelObjProtected(FLYPROTECT_CONTENT) )
170 {
171 if ( nSelType & nsSelectionType::SEL_OLE )
172 {
173 SetVerbs( GetWrtShell().GetOLEObject()->getSupportedVerbs() );
174 bVerbsActive = sal_True;
175 bResetVerbs = sal_False;
176 }
177 }
178 }
179 if ( bResetVerbs )
180 {
181 SetVerbs( Sequence< embed::VerbDescriptor >() );
182 bVerbsActive = sal_False;
183 }
184 }
185
186 /*--------------------------------------------------------------------
187 Description called by the SwEditWin when it gets the focus
188 --------------------------------------------------------------------*/
189
GotFocus() const190 void SwView::GotFocus() const
191 {
192 // if we got the focus, and the form shell *is* on the top of the dispatcher
193 // stack, then we need to rebuild the stack (the form shell doesn't belong to
194 // the top then)
195 const SfxDispatcher& rDispatcher = const_cast< SwView* >( this )->GetDispatcher();
196 SfxShell* pTopShell = rDispatcher.GetShell( 0 );
197 FmFormShell* pAsFormShell = PTR_CAST( FmFormShell, pTopShell );
198 if ( pAsFormShell )
199 {
200 pAsFormShell->ForgetActiveControl();
201 const_cast< SwView* >( this )->AttrChangedNotify( pWrtShell );
202 }
203 else if ( mpPostItMgr )
204 {
205 SwAnnotationShell* pAsAnnotationShell = PTR_CAST( SwAnnotationShell, pTopShell );
206 if ( pAsAnnotationShell )
207 {
208 mpPostItMgr->SetActiveSidebarWin(0);
209 const_cast< SwView* >( this )->AttrChangedNotify( pWrtShell );
210 }
211 }
212 if( GetWrtShellPtr() )
213 {
214 SwWrtShell& rWrtShell = GetWrtShell();
215 rWrtShell.GetDoc()->SetCurrentViewShell( GetWrtShellPtr() );
216 rWrtShell.GetDoc()->set( IDocumentSettingAccess::BROWSE_MODE,
217 rWrtShell.GetViewOptions()->getBrowseMode() );
218 }
219 }
220
221 /*--------------------------------------------------------------------
222 Description:
223 called by the FormShell when a form control is focused. This is
224 a request to put the form shell on the top of the dispatcher
225 stack
226 --------------------------------------------------------------------*/
227
IMPL_LINK(SwView,FormControlActivated,FmFormShell *,EMPTYARG)228 IMPL_LINK( SwView, FormControlActivated, FmFormShell*, EMPTYARG )
229 {
230 // if a form control has been activated, and the form shell is not on the top
231 // of the dispatcher stack, then we need to activate it
232 const SfxDispatcher& rDispatcher = GetDispatcher();
233 const SfxShell* pTopShell = rDispatcher.GetShell( 0 );
234 const FmFormShell* pAsFormShell = PTR_CAST( FmFormShell, pTopShell );
235 if ( !pAsFormShell )
236 {
237 // if we're editing text currently, cancel this
238 SdrView *pSdrView = pWrtShell ? pWrtShell->GetDrawView() : NULL;
239 if ( pSdrView && pSdrView->IsTextEdit() )
240 pSdrView->SdrEndTextEdit( sal_True );
241
242 const_cast< SwView* >( this )->AttrChangedNotify( pWrtShell );
243 }
244
245 return 0L;
246 }
247
SelectShell()248 void SwView::SelectShell()
249 {
250 //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
251 //
252 // Achtung: SelectShell fuer die WebView mitpflegen
253 //
254 //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
255
256 if(bInDtor)
257 return;
258 // Entscheidung, ob UpdateTable gerufen werden muss
259 sal_Bool bUpdateTable = sal_False;
260 const SwFrmFmt* pCurTableFmt = pWrtShell->GetTableFmt();
261 if(pCurTableFmt && pCurTableFmt != pLastTableFormat)
262 {
263 bUpdateTable = sal_True; // kann erst spaeter ausgefuehrt werden
264 }
265 pLastTableFormat = pCurTableFmt;
266
267 // SEL_TBL und SEL_TBL_CELLS koennen verodert sein!
268 int nNewSelectionType = (pWrtShell->GetSelectionType()
269 & ~nsSelectionType::SEL_TBL_CELLS);
270
271 if ( pFormShell && pFormShell->IsActiveControl() )
272 nNewSelectionType |= nsSelectionType::SEL_FOC_FRM_CTRL;
273
274 if ( nNewSelectionType == nSelectionType )
275 {
276 GetViewFrame()->GetBindings().InvalidateAll( sal_False );
277 if ( nSelectionType & nsSelectionType::SEL_OLE ||
278 nSelectionType & nsSelectionType::SEL_GRF )
279 // Fuer Grafiken und OLE kann sich natuerlich das Verb aendern!
280 ImpSetVerb( nNewSelectionType );
281 }
282 else
283 {
284
285 SfxDispatcher &rDispatcher = GetDispatcher();
286 SwToolbarConfigItem *pBarCfg = SW_MOD()->GetToolbarConfig();
287
288 // DELETEZ(pxSelectionObj); // Selektionsobjekt loeschen
289 if ( pShell )
290 {
291 rDispatcher.Flush(); // alle gecachten Shells wirklich loeschen
292
293 // Zur alten Selektion merken welche Toolbar sichtbar war
294 sal_uInt16 nId = static_cast< sal_uInt16 >( rDispatcher.GetObjectBarId( SFX_OBJECTBAR_OBJECT ));
295 if ( nId )
296 pBarCfg->SetTopToolbar( nSelectionType, nId );
297
298 SfxShell *pSfxShell;
299 for ( sal_uInt16 i = 0; sal_True; ++i )
300 {
301 pSfxShell = rDispatcher.GetShell( i );
302 if ( pSfxShell->ISA( SwBaseShell )
303 || pSfxShell->ISA( SwDrawTextShell )
304 || pSfxShell->ISA( svx::ExtrusionBar )
305 || pSfxShell->ISA( svx::FontworkBar )
306 || pSfxShell->ISA( SwAnnotationShell )
307 )
308 {
309 rDispatcher.Pop( *pSfxShell, SFX_SHELL_POP_DELETE );
310 }
311 else if ( pSfxShell->ISA( FmFormShell ) )
312 {
313 rDispatcher.Pop( *pSfxShell );
314 }
315 else
316 break;
317 }
318 }
319
320 sal_Bool bInitFormShell = sal_False;
321 if (!pFormShell)
322 {
323 bInitFormShell = sal_True;
324 pFormShell = new FmFormShell( this );
325 pFormShell->SetControlActivationHandler( LINK( this, SwView, FormControlActivated ) );
326 StartListening(*pFormShell);
327 }
328
329 sal_Bool bSetExtInpCntxt = sal_False;
330 nSelectionType = nNewSelectionType;
331 ShellModes eShellMode;
332
333 if ( !( nSelectionType & nsSelectionType::SEL_FOC_FRM_CTRL ) )
334 rDispatcher.Push( *pFormShell );
335
336 if ( nSelectionType & nsSelectionType::SEL_OLE )
337 {
338 eShellMode = SHELL_MODE_OBJECT;
339 pShell = new SwOleShell( *this );
340 rDispatcher.Push( *pShell );
341 }
342 else if ( nSelectionType & nsSelectionType::SEL_FRM
343 || nSelectionType & nsSelectionType::SEL_GRF)
344 {
345 eShellMode = SHELL_MODE_FRAME;
346 pShell = new SwFrameShell( *this );
347 rDispatcher.Push( *pShell );
348 if(nSelectionType & nsSelectionType::SEL_GRF )
349 {
350 eShellMode = SHELL_MODE_GRAPHIC;
351 pShell = new SwGrfShell( *this );
352 rDispatcher.Push( *pShell );
353 }
354 }
355 else if ( nSelectionType & nsSelectionType::SEL_DRW )
356 {
357 eShellMode = SHELL_MODE_DRAW;
358 pShell = new SwDrawShell( *this );
359 rDispatcher.Push( *pShell );
360
361 if ( nSelectionType & nsSelectionType::SEL_BEZ )
362 {
363 eShellMode = SHELL_MODE_BEZIER;
364 pShell = new SwBezierShell( *this );
365 rDispatcher.Push( *pShell );
366 }
367 else if( nSelectionType & nsSelectionType::SEL_MEDIA )
368 {
369 eShellMode = SHELL_MODE_MEDIA;
370 pShell = new SwMediaShell( *this );
371 rDispatcher.Push( *pShell );
372 }
373
374 if (nSelectionType & nsSelectionType::SEL_EXTRUDED_CUSTOMSHAPE)
375 {
376 eShellMode = SHELL_MODE_EXTRUDED_CUSTOMSHAPE;
377 pShell = new svx::ExtrusionBar(this);
378 rDispatcher.Push( *pShell );
379 }
380 if (nSelectionType & nsSelectionType::SEL_FONTWORK)
381 {
382 eShellMode = SHELL_MODE_FONTWORK;
383 pShell = new svx::FontworkBar(this);
384 rDispatcher.Push( *pShell );
385 }
386 }
387 else if ( nSelectionType & nsSelectionType::SEL_DRW_FORM )
388 {
389 eShellMode = SHELL_MODE_DRAW_FORM;
390 pShell = new SwDrawFormShell( *this );
391
392 rDispatcher.Push( *pShell );
393 }
394 else if ( nSelectionType & nsSelectionType::SEL_DRW_TXT )
395 {
396 bSetExtInpCntxt = sal_True;
397 eShellMode = SHELL_MODE_DRAWTEXT;
398 rDispatcher.Push( *(new SwBaseShell( *this )) );
399 pShell = new SwDrawTextShell( *this );
400 rDispatcher.Push( *pShell );
401 }
402 else if ( nSelectionType & nsSelectionType::SEL_POSTIT )
403 {
404 eShellMode = SHELL_MODE_POSTIT;
405 pShell = new SwAnnotationShell( *this );
406 rDispatcher.Push( *pShell );
407 }
408 else
409 {
410 bSetExtInpCntxt = sal_True;
411 eShellMode = SHELL_MODE_TEXT;
412 sal_uInt32 nHelpId = 0;
413 if ( nSelectionType & nsSelectionType::SEL_NUM )
414 {
415 eShellMode = SHELL_MODE_LIST_TEXT;
416 pShell = new SwListShell( *this );
417 nHelpId = pShell->GetHelpId();
418 rDispatcher.Push( *pShell );
419 }
420 pShell = new SwTextShell(*this);
421 if(nHelpId)
422 pShell->SetHelpId(nHelpId);
423 rDispatcher.Push( *pShell );
424 if ( nSelectionType & nsSelectionType::SEL_TBL )
425 {
426 eShellMode = eShellMode == SHELL_MODE_LIST_TEXT ? SHELL_MODE_TABLE_LIST_TEXT
427 : SHELL_MODE_TABLE_TEXT;
428 pShell = new SwTableShell( *this );
429 rDispatcher.Push( *pShell );
430 }
431 }
432
433 if ( nSelectionType & nsSelectionType::SEL_FOC_FRM_CTRL )
434 rDispatcher.Push( *pFormShell );
435
436 pViewImpl->SetShellMode(eShellMode);
437 ImpSetVerb( nSelectionType );
438
439 if( !GetDocShell()->IsReadOnly() )
440 {
441 if( bSetExtInpCntxt && GetWrtShell().HasReadonlySel() )
442 bSetExtInpCntxt = sal_False;
443
444 InputContext aCntxt( GetEditWin().GetInputContext() );
445 aCntxt.SetOptions( bSetExtInpCntxt
446 ? (aCntxt.GetOptions() |
447 ( INPUTCONTEXT_TEXT |
448 INPUTCONTEXT_EXTTEXTINPUT ))
449 : (aCntxt.GetOptions() & ~
450 ( INPUTCONTEXT_TEXT |
451 INPUTCONTEXT_EXTTEXTINPUT )) );
452 GetEditWin().SetInputContext( aCntxt );
453 }
454
455 // Zur neuen Selektion die Toolbar aktivieren, die auch beim letzten Mal
456 // aktiviert war
457 // Vorher muss ein Flush() sein, betrifft aber lt. MBA nicht das UI und ist
458 // kein Performance-Problem
459 // TODO/LATER: maybe now the Flush() command is superfluous?!
460 rDispatcher.Flush();
461
462 Point aPnt = GetEditWin().OutputToScreenPixel(GetEditWin().GetPointerPosPixel());
463 aPnt = GetEditWin().PixelToLogic(aPnt);
464 GetEditWin().UpdatePointer(aPnt);
465
466 SdrView* pDView = GetWrtShell().GetDrawView();
467 if ( bInitFormShell && pDView )
468 pFormShell->SetView(PTR_CAST(FmFormView, pDView));
469
470 }
471 // Guenstiger Zeitpunkt fuer die Kommunikation mit OLE-Objekten?
472 if ( GetDocShell()->GetDoc()->IsOLEPrtNotifyPending() )
473 GetDocShell()->GetDoc()->PrtOLENotify( sal_False );
474
475 // jetzt das Tabellen-Update
476 if(bUpdateTable)
477 pWrtShell->UpdateTable();
478
479 GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged();
480 }
481
482 // Zusammenspiel: AttrChangedNotify() und TimeoutHdl.
483 // Falls noch Actions offen sind keine Aktualisierung, da der
484 // Cursor auf der Core-Seite im Wald stehen kann.
485 // Da wir aber keine Stati mehr liefern koennen und wollen locken wir
486 // stattdessen den Dispatcher.
487
488
489
490 extern "C"
491 {
lcl_CmpIds(const void * pFirst,const void * pSecond)492 int lcl_CmpIds( const void *pFirst, const void *pSecond)
493 {
494 return (*(sal_uInt16*)pFirst) - (*(sal_uInt16*)pSecond);
495 }
496 }
497
498
499
IMPL_LINK(SwView,AttrChangedNotify,SwWrtShell *,EMPTYARG)500 IMPL_LINK( SwView, AttrChangedNotify, SwWrtShell *, EMPTYARG )
501 {
502 if ( GetEditWin().IsChainMode() )
503 GetEditWin().SetChainMode( sal_False );
504
505 // Opt: Nicht wenn PaintLocked. Beim Unlock wird dafuer nocheinmal ein
506 // Notify ausgeloest.
507 if( !pWrtShell->IsPaintLocked() && !bNoInterrupt &&
508 GetDocShell()->IsReadOnly() )
509 _CheckReadonlyState();
510
511 // JP 19.01.99: Cursor in Readonly Bereichen
512 if( !pWrtShell->IsPaintLocked() && !bNoInterrupt )
513 _CheckReadonlySelection();
514
515 if( !bAttrChgNotified )
516 {
517 if ( pWrtShell->BasicActionPend() || bNoInterrupt ||
518 GetDispatcher().IsLocked() || // do not confuse the SFX
519 GetViewFrame()->GetBindings().IsInUpdate() ) // do not confuse the SFX
520 {
521 bAttrChgNotified = sal_True;
522 aTimer.Start();
523
524 const SfxPoolItem *pItem;
525 if ( SFX_ITEM_SET != GetObjectShell()->GetMedium()->GetItemSet()->
526 GetItemState( SID_HIDDEN, sal_False, &pItem ) ||
527 !((SfxBoolItem*)pItem)->GetValue() )
528 {
529 GetViewFrame()->GetBindings().ENTERREGISTRATIONS();
530 bAttrChgNotifiedWithRegistrations = sal_True;
531 }
532
533 }
534 else
535 SelectShell();
536
537 }
538
539 // #i6193#, change ui if cursor is at a SwPostItField
540 if (mpPostItMgr)
541 {
542 mpPostItMgr->SetShadowState( pWrtShell->GetPostItFieldAtCursor() );
543 }
544
545 return 0;
546 }
547
548
549
IMPL_LINK(SwView,TimeoutHdl,Timer *,EMPTYARG)550 IMPL_LINK( SwView, TimeoutHdl, Timer *, EMPTYARG )
551 {
552 DBG_PROFSTART(viewhdl);
553
554 if( pWrtShell->BasicActionPend() || bNoInterrupt )
555 {
556 aTimer.Start();
557 DBG_PROFSTOP(viewhdl);
558 return 0;
559 }
560
561 if ( bAttrChgNotifiedWithRegistrations )
562 {
563 GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
564 bAttrChgNotifiedWithRegistrations = sal_False;
565 }
566
567 _CheckReadonlyState();
568 _CheckReadonlySelection();
569
570 sal_Bool bOldUndo = pWrtShell->DoesUndo();
571 pWrtShell->DoUndo( sal_False );
572 SelectShell();
573 pWrtShell->DoUndo( bOldUndo );
574 bAttrChgNotified = sal_False;
575 GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged();
576
577 DBG_PROFSTOP(viewhdl);
578 return 0;
579 }
580
_CheckReadonlyState()581 void SwView::_CheckReadonlyState()
582 {
583 SfxDispatcher &rDis = GetDispatcher();
584 // Um erkennen zu koennen ob bereits disabled ist!
585 SfxItemState eStateRO, eStateProtAll;
586 const SfxPoolItem *pItem;
587 // JP 29.04.97: von einem nur uns bekannten Slot den Status abfragen.
588 // Ansonsten kennen andere den Slot; wie z.B. die BasidIde
589 eStateRO = rDis.QueryState( FN_INSERT_BOOKMARK, pItem );
590 eStateProtAll = rDis.QueryState( FN_EDIT_REGION, pItem );
591 sal_Bool bChgd = sal_False;
592
593 if ( !pWrtShell->IsCrsrReadonly() )
594 {
595 static sal_uInt16 aROIds[] =
596 {
597 SID_DELETE, FN_BACKSPACE, FN_SHIFT_BACKSPACE,
598 SID_UNDO,
599 SID_REDO, SID_REPEAT, SID_PASTE,
600 SID_PASTE_UNFORMATTED,
601 SID_PASTE_SPECIAL, SID_SBA_BRW_INSERT,
602 SID_BACKGROUND_COLOR, FN_INSERT_BOOKMARK,
603 SID_CHARMAP, FN_INSERT_SOFT_HYPHEN,
604 FN_INSERT_HARDHYPHEN, FN_INSERT_HARD_SPACE, FN_INSERT_BREAK,
605 FN_INSERT_LINEBREAK, FN_INSERT_COLUMN_BREAK, FN_INSERT_BREAK_DLG,
606 FN_DELETE_SENT, FN_DELETE_BACK_SENT, FN_DELETE_WORD,
607 FN_DELETE_BACK_WORD, FN_DELETE_LINE, FN_DELETE_BACK_LINE,
608 FN_DELETE_PARA, FN_DELETE_BACK_PARA, FN_DELETE_WHOLE_LINE,
609 FN_CALCULATE, FN_FORMAT_RESET,
610 FN_POSTIT, FN_JAVAEDIT, SID_ATTR_PARA_ADJUST_LEFT,
611 SID_ATTR_PARA_ADJUST_RIGHT, SID_ATTR_PARA_ADJUST_CENTER,SID_ATTR_PARA_ADJUST_BLOCK,
612 SID_ATTR_PARA_LINESPACE_10, SID_ATTR_PARA_LINESPACE_15, SID_ATTR_PARA_LINESPACE_20,
613 SID_ATTR_CHAR_FONT, SID_ATTR_CHAR_FONTHEIGHT, SID_ATTR_CHAR_COLOR_BACKGROUND,
614 SID_ATTR_CHAR_COLOR_BACKGROUND_EXT, SID_ATTR_CHAR_COLOR_EXT,
615 SID_ATTR_CHAR_COLOR, SID_ATTR_CHAR_WEIGHT, SID_ATTR_CHAR_POSTURE,
616 SID_ATTR_CHAR_OVERLINE,
617 SID_ATTR_CHAR_UNDERLINE, SID_ATTR_FLASH, SID_ATTR_CHAR_STRIKEOUT,
618 FN_UNDERLINE_DOUBLE, SID_ATTR_CHAR_CONTOUR, SID_ATTR_CHAR_SHADOWED,
619 SID_ATTR_CHAR_AUTOKERN, SID_ATTR_CHAR_ESCAPEMENT, FN_SET_SUPER_SCRIPT,
620 FN_SET_SUB_SCRIPT, SID_ATTR_CHAR_CASEMAP, SID_ATTR_CHAR_LANGUAGE,
621 SID_ATTR_CHAR_KERNING, SID_CHAR_DLG, SID_ATTR_CHAR_WORDLINEMODE,
622 FN_GROW_FONT_SIZE, FN_SHRINK_FONT_SIZE, FN_TXTATR_INET,
623 FN_FORMAT_DROPCAPS, SID_ATTR_PARA_ADJUST, SID_ATTR_PARA_LINESPACE,
624 SID_ATTR_PARA_SPLIT, SID_ATTR_PARA_KEEP, SID_ATTR_PARA_WIDOWS,
625 SID_ATTR_PARA_ORPHANS,
626 SID_ATTR_PARA_MODEL, SID_PARA_DLG,
627 FN_SELECT_PARA, SID_DEC_INDENT,
628 SID_INC_INDENT
629 };
630 static sal_Bool bFirst = sal_True;
631 if ( bFirst )
632 {
633 qsort( (void*)aROIds, sizeof(aROIds)/sizeof(sal_uInt16), sizeof(sal_uInt16), lcl_CmpIds );
634 bFirst = sal_False;
635 }
636 if ( SFX_ITEM_DISABLED == eStateRO )
637 {
638 rDis.SetSlotFilter( sal_Bool(2), sizeof(aROIds)/sizeof(sal_uInt16), aROIds );
639 bChgd = sal_True;
640 }
641 }
642 else if( pWrtShell->IsAllProtect() )
643 {
644 if ( SFX_ITEM_DISABLED == eStateProtAll )
645 {
646 static sal_uInt16 aAllProtIds[] = { SID_SAVEDOC, FN_EDIT_REGION };
647 static sal_Bool bAllProtFirst = sal_True;
648 if ( bAllProtFirst )
649 {
650 qsort( (void*)aAllProtIds, sizeof(aAllProtIds)/sizeof(sal_uInt16), sizeof(sal_uInt16), lcl_CmpIds );
651 bAllProtFirst = sal_False;
652 }
653 rDis.SetSlotFilter( sal_Bool(2),
654 sizeof(aAllProtIds)/sizeof(sal_uInt16),
655 aAllProtIds );
656 bChgd = sal_True;
657 }
658 }
659 else if ( SFX_ITEM_DISABLED != eStateRO ||
660 SFX_ITEM_DISABLED != eStateProtAll )
661 {
662 bChgd = sal_True;
663 rDis.SetSlotFilter();
664 }
665 if ( bChgd )
666 GetViewFrame()->GetBindings().InvalidateAll(sal_True);
667 }
668
_CheckReadonlySelection()669 void SwView::_CheckReadonlySelection()
670 {
671 sal_uInt32 nDisableFlags = 0;
672 SfxDispatcher &rDis = GetDispatcher();
673
674 if( pWrtShell->HasReadonlySel() &&
675 ( !pWrtShell->GetDrawView() ||
676 !pWrtShell->GetDrawView()->GetMarkedObjectList().GetMarkCount() ))
677 nDisableFlags |= SW_DISABLE_ON_PROTECTED_CURSOR;
678
679 if( (SW_DISABLE_ON_PROTECTED_CURSOR & nDisableFlags ) !=
680 (SW_DISABLE_ON_PROTECTED_CURSOR & rDis.GetDisableFlags() ) )
681 {
682 // zusaetzlich am Window den InputContext umsetzen, damit in
683 // japanischen / chinesischen Versionen die externe Eingabe
684 // ab-/angeschaltet wird. Das aber nur wenn auch die richtige
685 // Shell auf dem Stack steht.
686 switch( pViewImpl->GetShellMode() )
687 {
688 case SHELL_MODE_TEXT:
689 case SHELL_MODE_LIST_TEXT:
690 case SHELL_MODE_TABLE_TEXT:
691 case SHELL_MODE_TABLE_LIST_TEXT:
692 {
693 // JP 22.01.99: temporaere Loesung!!! Sollte bei jeder Cursorbewegung
694 // den Font von der akt. Einfuegeposition setzen, also ausserhalb
695 // dieses if's. Aber TH wertet den Font zur Zeit nicht aus und
696 // das besorgen erscheint mir hier zu teuer zu sein.
697 // Ausserdem haben wir keinen Font, sondern nur Attribute aus denen
698 // die Textformatierung dann den richtigen Font zusammen baut.
699
700 InputContext aCntxt( GetEditWin().GetInputContext() );
701 aCntxt.SetOptions( SW_DISABLE_ON_PROTECTED_CURSOR & nDisableFlags
702 ? (aCntxt.GetOptions() & ~
703 ( INPUTCONTEXT_TEXT |
704 INPUTCONTEXT_EXTTEXTINPUT ))
705 : (aCntxt.GetOptions() |
706 ( INPUTCONTEXT_TEXT |
707 INPUTCONTEXT_EXTTEXTINPUT )) );
708 GetEditWin().SetInputContext( aCntxt );
709 }
710 break;
711 default:
712 ;
713 }
714
715 }
716
717 if( nDisableFlags != rDis.GetDisableFlags() )
718 {
719 rDis.SetDisableFlags( nDisableFlags );
720 GetViewFrame()->GetBindings().InvalidateAll( sal_True );
721 }
722 }
723
724
SwView(SfxViewFrame * _pFrame,SfxViewShell * pOldSh)725 SwView::SwView( SfxViewFrame *_pFrame, SfxViewShell* pOldSh )
726 : SfxViewShell( _pFrame, SWVIEWFLAGS ),
727 aPageStr( SW_RES( STR_PAGE )),
728 nNewPage(USHRT_MAX),
729 nOldPageNum(0),
730 pNumRuleNodeFromDoc(0), // #i23726#
731 pEditWin( new SwEditWin( &_pFrame->GetWindow(), *this ) ),
732 pWrtShell(0),
733 pShell(0),
734 pFormShell(0),
735 pHScrollbar(0),
736 pVScrollbar(0),
737 pScrollFill(new ScrollBarBox( &_pFrame->GetWindow(), _pFrame->GetFrame().GetParentFrame() ? 0 : WB_SIZEABLE )),
738 pHRuler( new SvxRuler(&GetViewFrame()->GetWindow(), pEditWin,
739 SVXRULER_SUPPORT_TABS |
740 SVXRULER_SUPPORT_PARAGRAPH_MARGINS |
741 SVXRULER_SUPPORT_BORDERS |
742 SVXRULER_SUPPORT_NEGATIVE_MARGINS|
743 SVXRULER_SUPPORT_REDUCED_METRIC,
744 GetViewFrame()->GetBindings(),
745 WB_STDRULER | WB_EXTRAFIELD | WB_BORDER)),
746 pVRuler(new SvxRuler(&GetViewFrame()->GetWindow(), pEditWin,
747 SVXRULER_SUPPORT_TABS | SVXRULER_SUPPORT_PARAGRAPH_MARGINS_VERTICAL|
748 SVXRULER_SUPPORT_BORDERS | SVXRULER_SUPPORT_REDUCED_METRIC,
749 GetViewFrame()->GetBindings(),
750 WB_VSCROLL | WB_EXTRAFIELD | WB_BORDER )),
751 pTogglePageBtn(0),
752 pPageUpBtn(0),
753 pPageDownBtn(0),
754 pNaviBtn(0),
755 pGlosHdl(0),
756 pDrawActual(0),
757 pLastTableFormat(0),
758 pFormatClipboard(new SwFormatClipboard()),
759 mpPostItMgr(0),
760 nSelectionType( INT_MAX ),
761 nPageCnt(0),
762 nDrawSfxId( USHRT_MAX ),
763 nFormSfxId( USHRT_MAX ),
764 nLastPasteDestination( 0xFFFF ),
765 nLeftBorderDistance( 0 ),
766 nRightBorderDistance( 0 ),
767 bInMailMerge(sal_False),
768 bInDtor(sal_False),
769 bOldShellWasPagePreView(sal_False),
770 bIsPreviewDoubleClick(sal_False)
771 {
772 // OD 18.12.2002 #103492# - According to discussion with MBA and further
773 // investigations, no old SfxViewShell will be set as parameter <pOldSh>,
774 // if function "New Window" is performed to open an additional view beside
775 // an already existing one.
776 // If the view is switch from one to another, the 'old' view is given by
777 // parameter <pOldSh>.
778
779 RTL_LOGFILE_CONTEXT_AUTHOR( aLog, "SW", "JP93722", "SwView::SwView" );
780
781 bCenterCrsr = bTopCrsr = bAllwaysShowSel = bTabColFromDoc = bTabRowFromDoc =
782 bSetTabColFromDoc = bSetTabRowFromDoc = bAttrChgNotified = bAttrChgNotifiedWithRegistrations =
783 bVerbsActive = bDrawRotate = bInOuterResizePixel = bInInnerResizePixel =
784 bPasteState = bPasteSpecialState = bMakeSelectionVisible = sal_False;
785
786 bShowAtResize = bDrawSelMode = bDocSzUpdated = sal_True;
787
788 _CreateScrollbar( sal_True );
789 _CreateScrollbar( sal_False );
790
791 pViewImpl = new SwView_Impl(this);
792 SetName(C2S("View"));
793 SetWindow( pEditWin );
794
795 aTimer.SetTimeout( 120 );
796
797 SwDocShell* pDocSh = PTR_CAST( SwDocShell, _pFrame->GetObjectShell() );
798 sal_Bool bOldModifyFlag = pDocSh->IsEnableSetModified();
799 if(bOldModifyFlag)
800 pDocSh->EnableSetModified( sal_False );
801 ASSERT( pDocSh, "View ohne DocShell." );
802 SwWebDocShell* pWebDShell = PTR_CAST( SwWebDocShell, pDocSh );
803
804 const SwMasterUsrPref *pUsrPref = SW_MOD()->GetUsrPref(0 != pWebDShell);
805 SwViewOption aUsrPref( *pUsrPref);
806
807 // ! get lingu options without loading lingu DLL
808 SvtLinguOptions aLinguOpt;
809 SvtLinguConfig().GetOptions( aLinguOpt );
810 aUsrPref.SetOnlineSpell( aLinguOpt.bIsSpellAuto );
811
812 sal_Bool bOldShellWasSrcView = sal_False;
813
814 // OD 18.12.2002 #103492# - determine, if there is an existing view for
815 // document
816 SfxViewShell* pExistingSh = 0;
817 if ( pOldSh )
818 {
819 pExistingSh = pOldSh;
820 // determine type of existing view
821 if( pExistingSh->IsA( TYPE( SwPagePreView ) ) )
822 {
823 sSwViewData = ((SwPagePreView*)pExistingSh)->GetPrevSwViewData();
824 sNewCrsrPos = ((SwPagePreView*)pExistingSh)->GetNewCrsrPos();
825 nNewPage = ((SwPagePreView*)pExistingSh)->GetNewPage();
826 bOldShellWasPagePreView = sal_True;
827 bIsPreviewDoubleClick = sNewCrsrPos.Len() > 0 || nNewPage != USHRT_MAX;
828 }
829 else if( pExistingSh->IsA( TYPE( SwSrcView ) ) )
830 bOldShellWasSrcView = sal_True;
831 }
832
833 RTL_LOGFILE_CONTEXT_TRACE( aLog, "before create WrtShell" );
834 if(PTR_CAST( SwView, pExistingSh))
835 {
836 pWrtShell = new SwWrtShell( *((SwView*)pExistingSh)->pWrtShell,
837 pEditWin, *this);
838 }
839 else if( dynamic_cast<SwWrtShell*>( pDocSh->GetDoc()->GetCurrentViewShell() ) )
840 {
841 pWrtShell = new SwWrtShell( *(SwWrtShell*)pDocSh->GetDoc()->GetCurrentViewShell(),
842 pEditWin, *this);
843 }
844 else
845 {
846 SwDoc& rDoc = *((SwDocShell*)pDocSh)->GetDoc();
847
848 if( !bOldShellWasSrcView && pWebDShell && !bOldShellWasPagePreView )
849 aUsrPref.setBrowseMode( sal_True );
850 else if( rDoc.IsLoaded() )
851 aUsrPref.setBrowseMode( rDoc.get(IDocumentSettingAccess::BROWSE_MODE) );
852
853 // Fuer den BrowseMode wollen wir keinen Factor uebernehmen.
854 if( aUsrPref.getBrowseMode() && aUsrPref.GetZoomType() != SVX_ZOOM_PERCENT )
855 {
856 aUsrPref.SetZoomType( SVX_ZOOM_PERCENT );
857 aUsrPref.SetZoom( 100 );
858 }
859 if(pDocSh->IsPreview())
860 {
861 aUsrPref.SetZoomType( SVX_ZOOM_WHOLEPAGE );
862 aUsrPref.SetViewLayoutBookMode( false );
863 aUsrPref.SetViewLayoutColumns( 1 );
864 }
865 pWrtShell = new SwWrtShell( rDoc, pEditWin, *this, &aUsrPref );
866 // #97610# creating an SwView from a SwPagePreView needs to
867 // add the ViewShell to the ring of the other ViewShell(s)
868 if(bOldShellWasPagePreView)
869 {
870 ViewShell& rPreviewViewShell = *((SwPagePreView*)pExistingSh)->GetViewShell();
871 pWrtShell->MoveTo(&rPreviewViewShell);
872 // #95521# to update the field command et.al. if necessary
873 const SwViewOption* pPreViewOpt = rPreviewViewShell.GetViewOptions();
874 if( pPreViewOpt->IsFldName() != aUsrPref.IsFldName() ||
875 pPreViewOpt->IsShowHiddenField() != aUsrPref.IsShowHiddenField() ||
876 pPreViewOpt->IsShowHiddenPara() != aUsrPref.IsShowHiddenPara() ||
877 pPreViewOpt->IsShowHiddenChar() != aUsrPref.IsShowHiddenChar() )
878 rPreviewViewShell.ApplyViewOptions(aUsrPref);
879 // OD 09.01.2003 #106334# - reset design mode at draw view for form
880 // shell, if needed.
881 if ( ((SwPagePreView*)pExistingSh)->ResetFormDesignMode() &&
882 pWrtShell->HasDrawView() )
883 {
884 SdrView* pDrawView = pWrtShell->GetDrawView();
885 pDrawView->SetDesignMode( ((SwPagePreView*)pExistingSh)->FormDesignModeToReset() );
886 }
887 }
888 }
889 RTL_LOGFILE_CONTEXT_TRACE( aLog, "after create WrtShell" );
890
891 // --> OD 2005-02-11 #i38810# - assure that modified state of document
892 // isn't reset, if document is already modified.
893 const bool bIsDocModified = pWrtShell->GetDoc()->IsModified();
894 // <--
895
896 // JP 05.02.99: Bug 61495 - damit unter anderem das HLineal im
897 // ReadonlyFall nicht angezeigt wird
898 aUsrPref.SetReadonly( pWrtShell->GetViewOptions()->IsReadonly() );
899
900 // No margin for OLE!
901 Size aBrwsBorder;
902 if( SFX_CREATE_MODE_EMBEDDED != pDocSh->GetCreateMode() )
903 aBrwsBorder = GetMargin();
904
905 pWrtShell->SetBrowseBorder( aBrwsBorder );
906
907 // Im CTOR duerfen keine Shell-Wechsel erfolgen, die muessen ueber
908 // den Timer "zwischengespeichert" werden. Sonst raeumt der SFX
909 // sie wieder vom Stack!
910 sal_Bool bOld = bNoInterrupt;
911 bNoInterrupt = sal_True;
912
913 pHRuler->SetActive( sal_True );
914 pVRuler->SetActive( sal_True );
915
916 SfxViewFrame* pViewFrame = GetViewFrame();
917 if( pViewFrame->GetFrame().GetParentFrame())
918 {
919 aUsrPref.SetViewHRuler(sal_False);
920 aUsrPref.SetViewVRuler(sal_False);
921 }
922
923 StartListening( *pViewFrame, sal_True );
924 StartListening( *pDocSh, sal_True );
925
926 // Vom HLineal den ZOOM-Faktor einstellen
927 Fraction aZoomFract( aUsrPref.GetZoom(), 100 );
928 pHRuler->SetZoom( aZoomFract );
929 pVRuler->SetZoom( aZoomFract );
930 pHRuler->SetDoubleClickHdl(LINK( this, SwView, ExecRulerClick ));
931 FieldUnit eMetric = pUsrPref->GetHScrollMetric();
932 pHRuler->SetUnit( eMetric );
933 eMetric = pUsrPref->GetVScrollMetric();
934 pVRuler->SetUnit( eMetric );
935
936 // DocShell setzen
937 pDocSh->SetView( this );
938 SW_MOD()->SetView( this );
939
940 mpPostItMgr = new SwPostItMgr(this);
941
942 // Die DocSize erfragen und verarbeiten. Ueber die Handler konnte
943 // die Shell nicht gefunden werden, weil die Shell innerhalb CTOR-Phase
944 // nicht in der SFX-Verwaltung bekannt ist.
945 DocSzChgd( pWrtShell->GetDocSize() );
946
947 // AttrChangedNotify Link setzen
948 pWrtShell->SetChgLnk(LINK(this, SwView, AttrChangedNotify));
949
950 if( pDocSh->GetCreateMode() == SFX_CREATE_MODE_EMBEDDED &&
951 // TODO/LATER: why a cast here?
952 //!((SvEmbeddedObject *)pDocSh)->GetVisArea().IsEmpty() )
953 //SetVisArea( ((SvEmbeddedObject *)pDocSh)->GetVisArea(),sal_False);
954 !pDocSh->GetVisArea(ASPECT_CONTENT).IsEmpty() )
955 SetVisArea( pDocSh->GetVisArea(ASPECT_CONTENT),sal_False);
956
957 pWrtShell->DoUndo( 0 != SW_MOD()->GetUndoOptions().GetUndoCount() );
958
959 const sal_Bool bBrowse = pWrtShell->GetViewOptions()->getBrowseMode();
960 // Disable "multiple window"
961 SetNewWindowAllowed(!bBrowse);
962 // End of disabled multiple window
963
964 ShowVScrollbar(aUsrPref.IsViewVScrollBar());
965 ShowHScrollbar(aUsrPref.IsViewHScrollBar());
966 pHScrollbar->SetAuto(bBrowse);
967 if( aUsrPref.IsViewHRuler() )
968 CreateTab();
969 if( aUsrPref.IsViewVRuler() )
970 CreateVLineal();
971
972 pWrtShell->SetUIOptions( aUsrPref );
973 pWrtShell->SetReadOnlyAvailable( aUsrPref.IsCursorInProtectedArea() );
974 pWrtShell->ApplyAccessiblityOptions(SW_MOD()->GetAccessibilityOptions());
975
976 if( pWrtShell->GetDoc()->IsUpdateExpFld() )
977 {
978 SET_CURR_SHELL( pWrtShell );
979 pWrtShell->StartAction();
980 pWrtShell->CalcLayout();
981 pWrtShell->GetDoc()->UpdateFlds(NULL, false);
982 pWrtShell->EndAction();
983 pWrtShell->GetDoc()->SetUpdateExpFldStat( sal_False );
984 }
985
986 // ggfs. alle Verzeichnisse updaten:
987 if( pWrtShell->GetDoc()->IsUpdateTOX() )
988 {
989 SfxRequest aSfxRequest( FN_UPDATE_TOX, SFX_CALLMODE_SLOT, GetPool() );
990 Execute( aSfxRequest );
991 pWrtShell->GetDoc()->SetUpdateTOX( sal_False ); // wieder zurueck setzen
992 pWrtShell->SttEndDoc(sal_True);
993 }
994
995 // kein ResetModified, wenn es schone eine View auf dieses Doc gibt
996 SfxViewFrame* pVFrame = GetViewFrame();
997 SfxViewFrame* pFirst = SfxViewFrame::GetFirst(pDocSh);
998 // zur Zeit(360) wird die View erst nach dem Ctor eingetragen
999 // der folgende Ausdruck funktioniert auch, wenn sich das aendert
1000 // JP 27.07.98: wenn per Undo nicht mehr die Modifizierung aufhebar ist,
1001 // so setze das Modified NICHT zurueck.
1002 // --> OD 2005-02-11 #i38810# - no reset of modified state, if document
1003 // was already modified.
1004 if (!pWrtShell->GetDoc()->GetIDocumentUndoRedo().IsUndoNoResetModified() &&
1005 ( !pFirst || pFirst == pVFrame ) &&
1006 !bIsDocModified )
1007 // <--
1008 {
1009 pWrtShell->ResetModified();
1010 }
1011
1012 bNoInterrupt = bOld;
1013
1014 // wird ein GlobalDoc neu angelegt, soll auch der Navigator erzeugt werden
1015 if( pDocSh->IsA(SwGlobalDocShell::StaticType()) &&
1016 !pVFrame->GetChildWindow( SID_NAVIGATOR ))
1017 {
1018 SfxBoolItem aNavi(SID_NAVIGATOR, sal_True);
1019 GetDispatcher().Execute(SID_NAVIGATOR, SFX_CALLMODE_ASYNCHRON, &aNavi, 0L);
1020 }
1021
1022
1023 uno::Reference< frame::XFrame > xFrame = pVFrame->GetFrame().GetFrameInterface();
1024
1025 uno::Reference< frame::XFrame > xBeamerFrame = xFrame->findFrame(
1026 OUString::createFromAscii("_beamer"), frame::FrameSearchFlag::CHILDREN);
1027 if(xBeamerFrame.is())
1028 {
1029 SwDBData aData = pWrtShell->GetDBData();
1030 SW_MOD()->ShowDBObj( *this, aData );
1031 }
1032
1033 // has anybody calls the attrchanged handler in the constructor?
1034 if( bAttrChgNotifiedWithRegistrations )
1035 {
1036 GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
1037 if( aTimer.IsActive() )
1038 aTimer.Stop();
1039 }
1040
1041 aTimer.SetTimeoutHdl(LINK(this, SwView, TimeoutHdl));
1042 bAttrChgNotified = bAttrChgNotifiedWithRegistrations = sal_False;
1043 if(bOldModifyFlag)
1044 pDocSh->EnableSetModified( sal_True );
1045 InvalidateBorder();
1046 }
1047
~SwView()1048 SwView::~SwView()
1049 {
1050 delete mpPostItMgr;
1051 // --> OD 2009-03-10 #i100035#
1052 mpPostItMgr = 0;
1053 // <--
1054
1055 bInDtor = sal_True;
1056 pEditWin->Hide(); // damit kein Paint Aerger machen kann!
1057 // An der SwDocShell den Pointer auf die View ruecksetzen
1058 SwDocShell* pDocSh = GetDocShell();
1059 if( pDocSh && pDocSh->GetView() == this )
1060 pDocSh->SetView( 0 );
1061 if ( SW_MOD()->GetView() == this )
1062 SW_MOD()->SetView( 0 );
1063
1064 if( aTimer.IsActive() && bAttrChgNotifiedWithRegistrations )
1065 GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
1066
1067 // JP 27.11.00: Bug 80631 - the last view must end the text edit
1068 SdrView *pSdrView = pWrtShell ? pWrtShell->GetDrawView() : 0;
1069 if( pSdrView && pSdrView->IsTextEdit() )
1070 pSdrView->SdrEndTextEdit( sal_True );
1071
1072 SetWindow( 0 );
1073
1074 pViewImpl->Invalidate();
1075 EndListening(*GetViewFrame());
1076 EndListening(*GetDocShell());
1077 delete pScrollFill;
1078 delete pWrtShell;
1079 pWrtShell = 0; // Auf 0 setzen, damit folgende DToren nicht drauf zugreifen
1080 pShell = 0;
1081 delete pHScrollbar;
1082 delete pVScrollbar;
1083 delete pHRuler;
1084 delete pVRuler;
1085 delete pTogglePageBtn;
1086 delete pPageUpBtn;
1087 delete pNaviBtn;
1088 delete pPageDownBtn;
1089 delete pGlosHdl;
1090 delete pViewImpl;
1091 delete pEditWin;
1092 delete pFormatClipboard;
1093 }
1094
GetDocShell()1095 SwDocShell* SwView::GetDocShell()
1096 {
1097 SfxObjectShell* pDocShell = GetViewFrame()->GetObjectShell();
1098 return PTR_CAST(SwDocShell, pDocShell);
1099 }
1100
1101 /*--------------------------------------------------------------------
1102 Description: CursorPos merken
1103 --------------------------------------------------------------------*/
1104
1105
WriteUserData(String & rUserData,sal_Bool bBrowse)1106 void SwView::WriteUserData( String &rUserData, sal_Bool bBrowse )
1107 {
1108 // Das Browse-Flag wird vom Sfx durchgereicht, wenn Dokumente gebrowsed
1109 // werden (nicht zu verwechseln mit dem BrowseMode).
1110 // Die dann gespeicherten Daten sind nicht persistent!!
1111
1112 const SwRect& rRect = pWrtShell->GetCharRect();
1113 const Rectangle& rVis = GetVisArea();
1114
1115 rUserData = String::CreateFromInt32( rRect.Left() );
1116 rUserData += ';';
1117 rUserData += String::CreateFromInt32( rRect.Top() );
1118 rUserData += ';';
1119 rUserData += String::CreateFromInt32( pWrtShell->GetViewOptions()->GetZoom() );
1120 rUserData += ';';
1121 rUserData += String::CreateFromInt32( rVis.Left() );
1122 rUserData += ';';
1123 rUserData += String::CreateFromInt32( rVis.Top() );
1124 rUserData += ';';
1125 rUserData += String::CreateFromInt32( bBrowse ? LONG_MIN : rVis.Right());
1126 rUserData += ';';
1127 rUserData += String::CreateFromInt32( bBrowse ? LONG_MIN : rVis.Bottom());
1128 rUserData += ';';
1129 rUserData += String::CreateFromInt32(
1130 (sal_uInt16)pWrtShell->GetViewOptions()->GetZoomType()); // eZoom;
1131 rUserData += ';';
1132 rUserData += FRMTYPE_NONE == pWrtShell->GetSelFrmType() ? '0' : '1';
1133 }
1134 /*--------------------------------------------------------------------
1135 Description: CursorPos setzen
1136 --------------------------------------------------------------------*/
1137 // #i43146# go to the last editing position when opening own files
lcl_IsOwnDocument(SwView & rView)1138 bool lcl_IsOwnDocument( SwView& rView )
1139 {
1140 uno::Reference<document::XDocumentPropertiesSupplier> xDPS(
1141 rView.GetDocShell()->GetModel(), uno::UNO_QUERY_THROW);
1142 uno::Reference<document::XDocumentProperties> xDocProps
1143 = xDPS->getDocumentProperties();
1144 String Created = xDocProps->getAuthor();
1145 String Changed = xDocProps->getModifiedBy();
1146 String FullName = SW_MOD()->GetUserOptions().GetFullName();
1147 return (FullName.Len() &&
1148 (Changed.Len() && Changed == FullName )) ||
1149 (!Changed.Len() && Created.Len() && Created == FullName );
1150 }
1151
1152
ReadUserData(const String & rUserData,sal_Bool bBrowse)1153 void SwView::ReadUserData( const String &rUserData, sal_Bool bBrowse )
1154 {
1155 if ( rUserData.GetTokenCount() > 1 &&
1156 // Fuer Dokumente ohne Layout nur im OnlineLayout oder beim
1157 // Forward/Backward
1158 (!pWrtShell->IsNewLayout() || pWrtShell->GetViewOptions()->getBrowseMode() || bBrowse) )
1159 {
1160 // #i43146# go to the last editing position when opening own files
1161 bool bIsOwnDocument = lcl_IsOwnDocument( *this );
1162
1163 SET_CURR_SHELL(pWrtShell);
1164
1165 sal_uInt16 nPos = 0;
1166
1167 // Nein, es ist *keine* gute Idee GetToken gleich im Point-Konstr.
1168 // aufzurufen, denn welcher Parameter wird zuerst ausgewertet?
1169 long nX = rUserData.GetToken( 0, ';', nPos ).ToInt32(),
1170 nY = rUserData.GetToken( 0, ';', nPos ).ToInt32();
1171 Point aCrsrPos( nX, nY );
1172
1173 sal_uInt16 nZoomFactor =
1174 static_cast< sal_uInt16 >( rUserData.GetToken(0, ';', nPos ).ToInt32() );
1175
1176 long nLeft = rUserData.GetToken(0, ';', nPos ).ToInt32(),
1177 nTop = rUserData.GetToken(0, ';', nPos ).ToInt32(),
1178 nRight = rUserData.GetToken(0, ';', nPos ).ToInt32(),
1179 nBottom= rUserData.GetToken(0, ';', nPos ).ToInt32();
1180
1181 const long nAdd = pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2;
1182 if ( nBottom <= (pWrtShell->GetDocSize().Height()+nAdd) )
1183 {
1184 pWrtShell->EnableSmooth( sal_False );
1185
1186 const Rectangle aVis( nLeft, nTop, nRight, nBottom );
1187
1188 sal_uInt16 nOff = 0;
1189 SvxZoomType eZoom;
1190 if( !pWrtShell->GetViewOptions()->getBrowseMode() )
1191 eZoom = (SvxZoomType) (sal_uInt16)rUserData.GetToken(nOff, ';', nPos ).ToInt32();
1192 else
1193 {
1194 eZoom = SVX_ZOOM_PERCENT;
1195 ++nOff;
1196 }
1197
1198 sal_Bool bSelectObj = (0 != rUserData.GetToken( nOff, ';', nPos ).ToInt32())
1199 && pWrtShell->IsObjSelectable( aCrsrPos );
1200
1201 // #i33307# restore editing position
1202 pViewImpl->SetRestorePosition(aCrsrPos, bSelectObj);
1203 // OD 11.02.2003 #100556# - set flag value to avoid macro execution.
1204 bool bSavedFlagValue = pWrtShell->IsMacroExecAllowed();
1205 pWrtShell->SetMacroExecAllowed( false );
1206 // !!! pb (11.08.2004): #i32536#
1207 // os: changed: The user data has to be read if the view is switched back from page preview
1208 // #i43146# go to the last editing position when opening own files
1209 if(bOldShellWasPagePreView || bIsOwnDocument)
1210 {
1211 pWrtShell->SwCrsrShell::SetCrsr( aCrsrPos, !bSelectObj );
1212 if( bSelectObj )
1213 {
1214 pWrtShell->SelectObj( aCrsrPos );
1215 pWrtShell->EnterSelFrmMode( &aCrsrPos );
1216 }
1217 }
1218
1219 // OD 11.02.2003 #100556# - reset flag value
1220 pWrtShell->SetMacroExecAllowed( bSavedFlagValue );
1221
1222 // OD 08.04.2003 #108693# - set visible area before applying
1223 // information from print preview. Otherwise, the applied information
1224 // is lost.
1225 // !!! pb (11.08.2004): #i32536#
1226 // os: changed: The user data has to be read if the view is switched back from page preview
1227 // #i43146# go to the last editing position when opening own files
1228 if(bOldShellWasPagePreView || bIsOwnDocument )
1229 {
1230 if ( bBrowse )
1231 SetVisArea( aVis.TopLeft() );
1232 else
1233 SetVisArea( aVis );
1234 }
1235
1236 // apply information from print preview - if available
1237 if( sNewCrsrPos.Len() )
1238 {
1239 long nXTmp = sNewCrsrPos.GetToken( 0, ';' ).ToInt32(),
1240 nYTmp = sNewCrsrPos.GetToken( 1, ';' ).ToInt32();
1241 Point aCrsrPos2( nXTmp, nYTmp );
1242 bSelectObj = pWrtShell->IsObjSelectable( aCrsrPos2 );
1243
1244 pWrtShell->SwCrsrShell::SetCrsr( aCrsrPos2, sal_False );
1245 if( bSelectObj )
1246 {
1247 pWrtShell->SelectObj( aCrsrPos2 );
1248 pWrtShell->EnterSelFrmMode( &aCrsrPos2 );
1249 }
1250 pWrtShell->MakeSelVisible();
1251 sNewCrsrPos.Erase();
1252 }
1253 else if(USHRT_MAX != nNewPage)
1254 {
1255 pWrtShell->GotoPage(nNewPage, sal_True);
1256 nNewPage = USHRT_MAX;
1257 }
1258
1259 SelectShell();
1260
1261 pWrtShell->StartAction();
1262 const SwViewOption* pVOpt = pWrtShell->GetViewOptions();
1263 if( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom )
1264 SetZoom( eZoom, nZoomFactor);
1265
1266 pWrtShell->LockView( sal_True );
1267 pWrtShell->EndAction();
1268 pWrtShell->LockView( sal_False );
1269 pWrtShell->EnableSmooth( sal_True );
1270 }
1271 }
1272 }
1273
ReadUserDataSequence(const uno::Sequence<beans::PropertyValue> & rSequence,sal_Bool bBrowse)1274 void SwView::ReadUserDataSequence ( const uno::Sequence < beans::PropertyValue >& rSequence, sal_Bool bBrowse )
1275 {
1276 if(GetDocShell()->IsPreview()||bIsPreviewDoubleClick)
1277 return;
1278 // #i43146# go to the last editing position when opening own files
1279 bool bIsOwnDocument = lcl_IsOwnDocument( *this );
1280 sal_Int32 nLength = rSequence.getLength();
1281 if (nLength && (!pWrtShell->IsNewLayout() || pWrtShell->GetViewOptions()->getBrowseMode() || bBrowse) )
1282 {
1283 SET_CURR_SHELL(pWrtShell);
1284 const beans::PropertyValue *pValue = rSequence.getConstArray();
1285 const SwRect& rRect = pWrtShell->GetCharRect();
1286 const Rectangle &rVis = GetVisArea();
1287 const SwViewOption* pVOpt = pWrtShell->GetViewOptions();
1288
1289 long nX = rRect.Left(), nY = rRect.Top(), nLeft = rVis.Left(), nTop = rVis.Top();
1290 long nRight = bBrowse ? LONG_MIN : rVis.Right(), nBottom = bBrowse ? LONG_MIN : rVis.Bottom();
1291 sal_Int16 nZoomType = static_cast< sal_Int16 >(pVOpt->GetZoomType());
1292 sal_Int16 nZoomFactor = static_cast < sal_Int16 > (pVOpt->GetZoom());
1293 bool bViewLayoutBookMode = pVOpt->IsViewLayoutBookMode();
1294 sal_Int16 nViewLayoutColumns = pVOpt->GetViewLayoutColumns();
1295
1296 sal_Bool bSelectedFrame = ( pWrtShell->GetSelFrmType() != FRMTYPE_NONE ),
1297 bGotViewLeft = sal_False, bGotViewTop = sal_False, bGotVisibleLeft = sal_False,
1298 bGotVisibleTop = sal_False, bGotVisibleRight = sal_False,
1299 bGotVisibleBottom = sal_False, bGotZoomType = sal_False,
1300 bGotZoomFactor = sal_False, bGotIsSelectedFrame = sal_False,
1301 bGotViewLayoutColumns = sal_False, bGotViewLayoutBookMode = sal_False;
1302
1303 for (sal_Int16 i = 0 ; i < nLength; i++)
1304 {
1305 if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ViewLeft" ) ) )
1306 {
1307 pValue->Value >>= nX;
1308 nX = MM100_TO_TWIP( nX );
1309 bGotViewLeft = sal_True;
1310 }
1311 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ViewTop" ) ) )
1312 {
1313 pValue->Value >>= nY;
1314 nY = MM100_TO_TWIP( nY );
1315 bGotViewTop = sal_True;
1316 }
1317 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "VisibleLeft" ) ) )
1318 {
1319 pValue->Value >>= nLeft;
1320 nLeft = MM100_TO_TWIP( nLeft );
1321 bGotVisibleLeft = sal_True;
1322 }
1323 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "VisibleTop" ) ) )
1324 {
1325 pValue->Value >>= nTop;
1326 nTop = MM100_TO_TWIP( nTop );
1327 bGotVisibleTop = sal_True;
1328 }
1329 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "VisibleRight" ) ) )
1330 {
1331 pValue->Value >>= nRight;
1332 nRight = MM100_TO_TWIP( nRight );
1333 bGotVisibleRight = sal_True;
1334 }
1335 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "VisibleBottom" ) ) )
1336 {
1337 pValue->Value >>= nBottom;
1338 nBottom = MM100_TO_TWIP( nBottom );
1339 bGotVisibleBottom = sal_True;
1340 }
1341 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ZoomType" ) ) )
1342 {
1343 pValue->Value >>= nZoomType;
1344 bGotZoomType = sal_True;
1345 }
1346 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ZoomFactor" ) ) )
1347 {
1348 pValue->Value >>= nZoomFactor;
1349 bGotZoomFactor = sal_True;
1350 }
1351 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ViewLayoutColumns" ) ) )
1352 {
1353 pValue->Value >>= nViewLayoutColumns;
1354 bGotViewLayoutColumns = sal_True;
1355 }
1356 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "ViewLayoutBookMode" ) ) )
1357 {
1358 bViewLayoutBookMode = * (sal_Bool *) pValue->Value.getValue();
1359 bGotViewLayoutBookMode = sal_True;
1360 }
1361 else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM( "IsSelectedFrame" ) ) )
1362 {
1363 pValue->Value >>= bSelectedFrame;
1364 bGotIsSelectedFrame = sal_True;
1365 }
1366 pValue++;
1367 }
1368 if (bGotVisibleBottom)
1369 {
1370 Point aCrsrPos( nX, nY );
1371 const long nAdd = pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2;
1372 if (nBottom <= (pWrtShell->GetDocSize().Height()+nAdd) )
1373 {
1374 pWrtShell->EnableSmooth( sal_False );
1375 const Rectangle aVis( nLeft, nTop, nRight, nBottom );
1376
1377 sal_uInt16 nOff = 0;
1378 SvxZoomType eZoom;
1379 if ( !pWrtShell->GetViewOptions()->getBrowseMode() )
1380 eZoom = static_cast < SvxZoomType > ( nZoomType );
1381 else
1382 {
1383 eZoom = SVX_ZOOM_PERCENT;
1384 ++nOff;
1385 }
1386 if (bGotIsSelectedFrame)
1387 {
1388 sal_Bool bSelectObj = (sal_False != bSelectedFrame )
1389 && pWrtShell->IsObjSelectable( aCrsrPos );
1390
1391 // OD 11.02.2003 #100556# - set flag value to avoid macro execution.
1392 bool bSavedFlagValue = pWrtShell->IsMacroExecAllowed();
1393 pWrtShell->SetMacroExecAllowed( false );
1394 // !!! pb (11.08.2004): #i32536#
1395 // os: changed: The user data has to be read if the view is switched back from page preview
1396 // #i43146# go to the last editing position when opening own files
1397 // #i33307# restore editing position
1398 pViewImpl->SetRestorePosition(aCrsrPos, bSelectObj);
1399 if(bOldShellWasPagePreView|| bIsOwnDocument)
1400 {
1401 pWrtShell->SwCrsrShell::SetCrsr( aCrsrPos, !bSelectObj );
1402 if( bSelectObj )
1403 {
1404 pWrtShell->SelectObj( aCrsrPos );
1405 pWrtShell->EnterSelFrmMode( &aCrsrPos );
1406 }
1407 }
1408
1409 // OD 11.02.2003 #100556# - reset flag value
1410 pWrtShell->SetMacroExecAllowed( bSavedFlagValue );
1411 }
1412 SelectShell();
1413
1414 // Set ViewLayoutSettings
1415 const bool bSetViewLayoutSettings = bGotViewLayoutColumns && bGotViewLayoutBookMode &&
1416 ( pVOpt->GetViewLayoutColumns() != nViewLayoutColumns || pVOpt->IsViewLayoutBookMode() != bViewLayoutBookMode );
1417
1418 const bool bSetViewSettings = bGotZoomType && bGotZoomFactor &&
1419 ( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom );
1420
1421 // In case we have a 'fixed' view layout of 2 or more columns,
1422 // we have to apply the view options *before* starting the action.
1423 // Otherwise the SetZoom function cannot work correctly, because
1424 // the view layout hasn't been calculated.
1425 const bool bZoomNeedsViewLayout = bSetViewLayoutSettings &&
1426 1 < nViewLayoutColumns &&
1427 bSetViewSettings &&
1428 eZoom != SVX_ZOOM_PERCENT;
1429
1430
1431 if ( !bZoomNeedsViewLayout )
1432 pWrtShell->StartAction();
1433
1434 if ( bSetViewLayoutSettings )
1435 SetViewLayout( nViewLayoutColumns, bViewLayoutBookMode, sal_True );
1436
1437 if ( bZoomNeedsViewLayout )
1438 pWrtShell->StartAction();
1439
1440 if ( bSetViewSettings )
1441 SetZoom( eZoom, nZoomFactor, sal_True );
1442
1443 // !!! pb (11.08.2004): #i32536#
1444 // os: changed: The user data has to be read if the view is switched back from page preview
1445 // #i43146# go to the last editing position when opening own files
1446 if(bOldShellWasPagePreView||bIsOwnDocument)
1447 {
1448 if ( bBrowse && bGotVisibleLeft && bGotVisibleTop )
1449 {
1450 Point aTopLeft(aVis.TopLeft());
1451 // #i76699# make sure the document is still centered
1452 const SwTwips lBorder = IsDocumentBorder() ? DOCUMENTBORDER : 2 * DOCUMENTBORDER;
1453 SwTwips nEditWidth = GetEditWin().GetOutputSize().Width();
1454 if(nEditWidth > (aDocSz.Width() + lBorder ))
1455 aTopLeft.X() = ( aDocSz.Width() + lBorder - nEditWidth ) / 2;
1456 else
1457 {
1458 // check if the values are possible
1459 long nXMax = pHScrollbar->GetRangeMax() - pHScrollbar->GetVisibleSize();
1460 if( aTopLeft.X() > nXMax )
1461 aTopLeft.X() = nXMax < 0 ? 0 : nXMax;
1462 }
1463 SetVisArea( aTopLeft );
1464 }
1465 else if (bGotVisibleLeft && bGotVisibleTop && bGotVisibleRight && bGotVisibleBottom )
1466 SetVisArea( aVis );
1467 }
1468
1469 pWrtShell->LockView( sal_True );
1470 pWrtShell->EndAction();
1471 pWrtShell->LockView( sal_False );
1472 pWrtShell->EnableSmooth( sal_True );
1473 }
1474 }
1475 }
1476 }
1477 #define NUM_VIEW_SETTINGS 12
WriteUserDataSequence(uno::Sequence<beans::PropertyValue> & rSequence,sal_Bool bBrowse)1478 void SwView::WriteUserDataSequence ( uno::Sequence < beans::PropertyValue >& rSequence, sal_Bool bBrowse )
1479 {
1480 const SwRect& rRect = pWrtShell->GetCharRect();
1481 const Rectangle& rVis = GetVisArea();
1482 Any aAny;
1483
1484 rSequence.realloc ( NUM_VIEW_SETTINGS );
1485 sal_Int16 nIndex = 0;
1486 beans::PropertyValue *pValue = rSequence.getArray();
1487
1488 sal_uInt16 nViewID( GetViewFrame()->GetCurViewId());
1489 pValue->Name = rtl::OUString ( RTL_CONSTASCII_USTRINGPARAM( "ViewId" ) );
1490 OUStringBuffer sBuffer ( OUString(RTL_CONSTASCII_USTRINGPARAM( "view" ) ) );
1491 SvXMLUnitConverter::convertNumber(sBuffer, static_cast<sal_Int32>(nViewID));
1492 pValue->Value <<= sBuffer.makeStringAndClear();
1493 pValue++;nIndex++;
1494
1495 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ViewLeft" ) );
1496 pValue->Value <<= TWIP_TO_MM100 ( rRect.Left() );
1497 pValue++;nIndex++;
1498
1499 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ViewTop" ) );
1500 pValue->Value <<= TWIP_TO_MM100 ( rRect.Top() );
1501 pValue++;nIndex++;
1502
1503 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "VisibleLeft" ) );
1504 pValue->Value <<= TWIP_TO_MM100 ( rVis.Left() );
1505 pValue++;nIndex++;
1506
1507 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "VisibleTop" ) );
1508 pValue->Value <<= TWIP_TO_MM100 ( rVis.Top() );
1509 pValue++;nIndex++;
1510
1511 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "VisibleRight" ) );
1512 pValue->Value <<= TWIP_TO_MM100 ( bBrowse ? LONG_MIN : rVis.Right() );
1513 pValue++;nIndex++;
1514
1515 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "VisibleBottom" ) );
1516 pValue->Value <<= TWIP_TO_MM100 ( bBrowse ? LONG_MIN : rVis.Bottom() );
1517 pValue++;nIndex++;
1518
1519 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ZoomType" ) );
1520 const sal_Int16 nZoomType = static_cast< sal_Int16 >(pWrtShell->GetViewOptions()->GetZoomType());
1521 pValue->Value <<= nZoomType;
1522 pValue++;nIndex++;
1523
1524 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ViewLayoutColumns" ) );
1525 const sal_Int16 nViewLayoutColumns = static_cast< sal_Int16 >(pWrtShell->GetViewOptions()->GetViewLayoutColumns());
1526 pValue->Value <<= nViewLayoutColumns;
1527 pValue++;nIndex++;
1528
1529 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ViewLayoutBookMode" ) );
1530 const sal_Bool bIsViewLayoutBookMode = pWrtShell->GetViewOptions()->IsViewLayoutBookMode();
1531 pValue->Value.setValue( &bIsViewLayoutBookMode, ::getBooleanCppuType() );
1532 pValue++;nIndex++;
1533
1534 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "ZoomFactor" ) );
1535 pValue->Value <<= static_cast < sal_Int16 > (pWrtShell->GetViewOptions()->GetZoom());
1536 pValue++;nIndex++;
1537
1538 pValue->Name = OUString ( RTL_CONSTASCII_USTRINGPARAM ( "IsSelectedFrame" ) );
1539 const sal_Bool bIsSelected = FRMTYPE_NONE == pWrtShell->GetSelFrmType() ? sal_False : sal_True;
1540 pValue->Value.setValue ( &bIsSelected, ::getBooleanCppuType() );
1541 nIndex++;
1542
1543 if ( nIndex < NUM_VIEW_SETTINGS )
1544 rSequence.realloc ( nIndex );
1545 }
1546 #undef NUM_VIEW_SETTINGS
1547
1548
1549
ShowCursor(FASTBOOL bOn)1550 void SwView::ShowCursor( FASTBOOL bOn )
1551 {
1552 // JP 10.10.2001: Bug 90461 - don't scroll the cursor into the visible area
1553 sal_Bool bUnlockView = !pWrtShell->IsViewLocked();
1554 pWrtShell->LockView( sal_True ); // lock visible section
1555
1556 if( !bOn )
1557 pWrtShell->HideCrsr();
1558 else if( !pWrtShell->IsFrmSelected() && !pWrtShell->IsObjSelected() )
1559 pWrtShell->ShowCrsr();
1560
1561 if( bUnlockView )
1562 pWrtShell->LockView( sal_False );
1563 }
1564
1565
1566
DoVerb(long nVerb)1567 ErrCode SwView::DoVerb( long nVerb )
1568 {
1569 if ( !GetViewFrame()->GetFrame().IsInPlace() )
1570 {
1571 SwWrtShell &rSh = GetWrtShell();
1572 const int nSel = rSh.GetSelectionType();
1573 if ( nSel & nsSelectionType::SEL_OLE )
1574 rSh.LaunchOLEObj( nVerb );
1575 }
1576 return ERRCODE_NONE;
1577 }
1578
1579 /*-----------------17.02.98 13:33-------------------
1580 nur sal_True fuer eine Textselektion zurueck geben
1581 --------------------------------------------------*/
HasSelection(sal_Bool bText) const1582 sal_Bool SwView::HasSelection( sal_Bool bText ) const
1583 {
1584 return bText ? GetWrtShell().SwCrsrShell::HasSelection()
1585 : GetWrtShell().HasSelection();
1586 }
1587
1588 /*-----------------09/16/97 09:50am-----------------
1589
1590 --------------------------------------------------*/
1591
GetSelectionText(sal_Bool bCompleteWrds)1592 String SwView::GetSelectionText( sal_Bool bCompleteWrds )
1593 {
1594 return GetSelectionTextParam( bCompleteWrds, sal_True );
1595 }
1596
1597 /*-----------------09/16/97 09:50am-----------------
1598
1599 --------------------------------------------------*/
GetSelectionTextParam(sal_Bool bCompleteWrds,sal_Bool bEraseTrail)1600 String SwView::GetSelectionTextParam( sal_Bool bCompleteWrds,
1601 sal_Bool bEraseTrail )
1602 {
1603 String sReturn;
1604 if( bCompleteWrds && !GetWrtShell().HasSelection() )
1605 GetWrtShell().SelWrd();
1606
1607 GetWrtShell().GetSelectedText( sReturn );
1608 if( bEraseTrail )
1609 sReturn.EraseTrailingChars();
1610 return sReturn;
1611 }
1612
1613 /*--------------------------------------------------------------------
1614 Description:
1615 --------------------------------------------------------------------*/
1616
1617
1618
GetGlosHdl()1619 SwGlossaryHdl* SwView::GetGlosHdl()
1620 {
1621 if(!pGlosHdl)
1622 pGlosHdl = new SwGlossaryHdl(GetViewFrame(), pWrtShell);
1623 return pGlosHdl;
1624 }
1625
1626 /*-----------------05.09.96 15.50-------------------
1627
1628 --------------------------------------------------*/
1629
1630
1631
Notify(SfxBroadcaster & rBC,const SfxHint & rHint)1632 void SwView::Notify( SfxBroadcaster& rBC, const SfxHint& rHint )
1633 {
1634 sal_Bool bCallBase = sal_True;
1635 if ( rHint.ISA(SfxSimpleHint) )
1636 {
1637 sal_uInt32 nId = ((SfxSimpleHint&)rHint).GetId();
1638 switch ( nId )
1639 {
1640 // --> OD 2005-03-03 #i43775# - sub shells will be destroyed by the
1641 // dispatcher, if the view frame is dying. Thus, reset member <pShell>.
1642 case SFX_HINT_DYING:
1643 {
1644 if ( &rBC == GetViewFrame() )
1645 {
1646 ResetSubShell();
1647 }
1648 }
1649 break;
1650 // <--
1651 case SFX_HINT_MODECHANGED:
1652 {
1653 // Modalmodus-Umschaltung?
1654 sal_Bool bModal = GetDocShell()->IsInModalMode();
1655 pHRuler->SetActive( !bModal );
1656 pVRuler->SetActive( !bModal );
1657 }
1658
1659 /* no break here */
1660
1661 case SFX_HINT_TITLECHANGED:
1662 if ( GetDocShell()->IsReadOnly() != GetWrtShell().GetViewOptions()->IsReadonly() )
1663 {
1664 SwWrtShell &rSh = GetWrtShell();
1665 rSh.SetReadonlyOption( GetDocShell()->IsReadOnly() );
1666
1667 if ( rSh.GetViewOptions()->IsViewVRuler() )
1668 CreateVLineal();
1669 else
1670 KillVLineal();
1671 if ( rSh.GetViewOptions()->IsViewHRuler() )
1672 CreateTab();
1673 else
1674 KillTab();
1675 bool bReadonly = GetDocShell()->IsReadOnly();
1676 // #i76332# if document is to be opened in alive-mode then this has to be regarded while switching from readonly-mode to edit-mode
1677 if( !bReadonly )
1678 {
1679 SwDrawModel* pDrawModel = 0;
1680
1681 if ( 0 != ( pDrawModel = GetDocShell()->GetDoc()->GetDrawModel() ) )
1682 {
1683 if( !pDrawModel->GetOpenInDesignMode() )
1684 break; // don't touch the design mode
1685 }
1686 }
1687 SfxBoolItem aItem( SID_FM_DESIGN_MODE, !bReadonly);
1688 GetDispatcher().Execute( SID_FM_DESIGN_MODE, SFX_CALLMODE_ASYNCHRON,
1689 &aItem, 0L );
1690 }
1691 break;
1692
1693 case SW_BROADCAST_DRAWVIEWS_CREATED:
1694 {
1695 bCallBase = sal_False;
1696 if ( GetFormShell() )
1697 {
1698 GetFormShell()->SetView(
1699 PTR_CAST(FmFormView, GetWrtShell().GetDrawView()) );
1700 SfxBoolItem aItem( SID_FM_DESIGN_MODE, !GetDocShell()->IsReadOnly());
1701 GetDispatcher().Execute( SID_FM_DESIGN_MODE, SFX_CALLMODE_SYNCHRON,
1702 &aItem, 0L );
1703 }
1704 }
1705 break;
1706 }
1707 }
1708 else if(rHint.ISA(FmDesignModeChangedHint))
1709 {
1710 sal_Bool bDesignMode = ((FmDesignModeChangedHint&)rHint).GetDesignMode();
1711 if (!bDesignMode && GetDrawFuncPtr())
1712 {
1713 GetDrawFuncPtr()->Deactivate();
1714 SetDrawFuncPtr(NULL);
1715 LeaveDrawCreate();
1716 AttrChangedNotify(pWrtShell);
1717 }
1718 }
1719
1720 if ( bCallBase )
1721 SfxViewShell::Notify(rBC, rHint);
1722 }
1723
1724 /*-----------------02.12.96 12:36-------------------
1725
1726 --------------------------------------------------*/
1727 #if defined WNT || defined UNX
1728
ScannerEventHdl(const EventObject &)1729 void SwView::ScannerEventHdl( const EventObject& /*rEventObject*/ )
1730 {
1731 uno::Reference< XScannerManager > xScanMgr = SW_MOD()->GetScannerManager();
1732 if( xScanMgr.is() )
1733 {
1734 const ScannerContext aContext( xScanMgr->getAvailableScanners().getConstArray()[ 0 ] );
1735 const ScanError eError = xScanMgr->getError( aContext );
1736
1737 if( ScanError_ScanErrorNone == eError )
1738 {
1739 const uno::Reference< awt::XBitmap > xBitmap( xScanMgr->getBitmap( aContext ) );
1740
1741 if( xBitmap.is() )
1742 {
1743 const BitmapEx aScanBmp( VCLUnoHelper::GetBitmap( xBitmap ) );
1744
1745 if( !!aScanBmp )
1746 {
1747 Graphic aGrf(aScanBmp);
1748 pWrtShell->Insert( aEmptyStr, aEmptyStr, aGrf );
1749 }
1750 }
1751 }
1752 }
1753 SfxBindings& rBind = GetViewFrame()->GetBindings();
1754 rBind.Invalidate( SID_TWAIN_SELECT );
1755 rBind.Invalidate( SID_TWAIN_TRANSFER );
1756 }
1757 #endif
1758
1759 /*-----------------04.03.97 15:07-------------------
1760
1761 --------------------------------------------------*/
1762
1763
StopShellTimer()1764 void SwView::StopShellTimer()
1765 {
1766 if(aTimer.IsActive())
1767 {
1768 aTimer.Stop();
1769 if ( bAttrChgNotifiedWithRegistrations )
1770 {
1771 GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
1772 bAttrChgNotifiedWithRegistrations = sal_False;
1773 }
1774 SelectShell();
1775 bAttrChgNotified = sal_False;
1776 }
1777 }
1778
1779 /*-----------------09/03/97 04:12pm-----------------
1780
1781 --------------------------------------------------*/
PrepareClose(sal_Bool bUI,sal_Bool bForBrowsing)1782 sal_uInt16 SwView::PrepareClose( sal_Bool bUI, sal_Bool bForBrowsing )
1783 {
1784 SfxViewFrame* pVFrame = GetViewFrame();
1785 pVFrame->SetChildWindow( SwInputChild::GetChildWindowId(), sal_False );
1786 if( pVFrame->GetDispatcher()->IsLocked() )
1787 pVFrame->GetDispatcher()->Lock(sal_False);
1788
1789 sal_uInt16 nRet;
1790 if ( pFormShell &&
1791 sal_True != (nRet = pFormShell->PrepareClose( bUI, bForBrowsing )) )
1792
1793 {
1794 return nRet;
1795 }
1796 return SfxViewShell::PrepareClose( bUI, bForBrowsing );
1797 }
1798
1799
1800
1801 // status methods for clipboard.
1802 // Status changes now notified from the clipboard.
IsPasteAllowed()1803 sal_Bool SwView::IsPasteAllowed()
1804 {
1805 sal_uInt16 nPasteDestination = SwTransferable::GetSotDestination( *pWrtShell );
1806 if( nLastPasteDestination != nPasteDestination )
1807 {
1808 TransferableDataHelper aDataHelper(
1809 TransferableDataHelper::CreateFromSystemClipboard(
1810 &GetEditWin()) );
1811 if( aDataHelper.GetXTransferable().is() )
1812 {
1813 bPasteState = SwTransferable::IsPaste( *pWrtShell, aDataHelper );
1814 bPasteSpecialState = SwTransferable::IsPasteSpecial(
1815 *pWrtShell, aDataHelper );
1816 }
1817 else
1818 bPasteState = bPasteSpecialState = sal_False;
1819
1820 if( 0xFFFF == nLastPasteDestination ) // the init value
1821 pViewImpl->AddClipboardListener();
1822 nLastPasteDestination = nPasteDestination;
1823 }
1824 return bPasteState;
1825 }
1826
IsPasteSpecialAllowed()1827 sal_Bool SwView::IsPasteSpecialAllowed()
1828 {
1829 if ( pFormShell && pFormShell->IsActiveControl() )
1830 return sal_False;
1831
1832 sal_uInt16 nPasteDestination = SwTransferable::GetSotDestination( *pWrtShell );
1833 if( nLastPasteDestination != nPasteDestination )
1834 {
1835 TransferableDataHelper aDataHelper(
1836 TransferableDataHelper::CreateFromSystemClipboard(
1837 &GetEditWin()) );
1838 if( aDataHelper.GetXTransferable().is() )
1839 {
1840 bPasteState = SwTransferable::IsPaste( *pWrtShell, aDataHelper );
1841 bPasteSpecialState = SwTransferable::IsPasteSpecial(
1842 *pWrtShell, aDataHelper );
1843 }
1844 else
1845 bPasteState = bPasteSpecialState = sal_False;
1846
1847 if( 0xFFFF == nLastPasteDestination ) // the init value
1848 pViewImpl->AddClipboardListener();
1849 }
1850 return bPasteSpecialState;
1851 }
1852 /* -----------------------------12.07.01 13:25--------------------------------
1853
1854 ---------------------------------------------------------------------------*/
NotifyDBChanged()1855 void SwView::NotifyDBChanged()
1856 {
1857 GetViewImpl()->GetUNOObject_Impl()->NotifyDBChanged();
1858 }
1859
1860 /*--------------------------------------------------------------------
1861 Description: print
1862 --------------------------------------------------------------------*/
1863
1864 /* -----------------------------28.10.02 13:25--------------------------------
1865
1866 ---------------------------------------------------------------------------*/
GetTmpSelectionDoc()1867 SfxObjectShellLock & SwView::GetTmpSelectionDoc()
1868 {
1869 return GetViewImpl()->GetTmpSelectionDoc();
1870 }
1871 /* -----------------------------31.10.02 13:25--------------------------------
1872
1873 ---------------------------------------------------------------------------*/
GetOrCreateTmpSelectionDoc()1874 SfxObjectShellLock & SwView::GetOrCreateTmpSelectionDoc()
1875 {
1876 SfxObjectShellLock &rxTmpDoc = GetViewImpl()->GetTmpSelectionDoc();
1877 if (!rxTmpDoc.Is())
1878 {
1879 SwXTextView *pImpl = GetViewImpl()->GetUNOObject_Impl();
1880 rxTmpDoc = pImpl->BuildTmpSelectionDoc();
1881 }
1882 return rxTmpDoc;
1883 }
1884 /* -----------------3/31/2003 12:39PM----------------
1885
1886 --------------------------------------------------*/
AddTransferable(SwTransferable & rTransferable)1887 void SwView::AddTransferable(SwTransferable& rTransferable)
1888 {
1889 GetViewImpl()->AddTransferable(rTransferable);
1890 }
1891
1892 /* --------------------------------------------------*/
1893
1894 namespace sw {
1895
InitPrintOptionsFromApplication(SwPrintData & o_rData,bool const bWeb)1896 void InitPrintOptionsFromApplication(SwPrintData & o_rData, bool const bWeb)
1897 {
1898 o_rData = *SW_MOD()->GetPrtOptions(bWeb);
1899 }
1900
1901 } // namespace sw
1902