xref: /trunk/main/sw/source/ui/uiview/viewtab.cxx (revision ff0525f24f03981d56b7579b645949f111420994)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sw.hxx"
26 
27 
28 #include <tools/list.hxx>
29 
30 #include <hintids.hxx>
31 #include "uitool.hxx"
32 #include <sfx2/app.hxx>
33 #include <svx/rulritem.hxx>
34 #include <editeng/tstpitem.hxx>
35 #include <sfx2/request.hxx>
36 #include <editeng/lrspitem.hxx>
37 #include <editeng/ulspitem.hxx>
38 #include <editeng/boxitem.hxx>
39 #include <editeng/frmdiritem.hxx>
40 #include <svl/eitem.hxx>
41 #include <svl/whiter.hxx>
42 #include <svx/ruler.hxx>
43 #include <editeng/protitem.hxx>
44 #include <svl/rectitem.hxx>
45 #include <sfx2/bindings.hxx>
46 #include <fmtfsize.hxx>
47 #include <fmthdft.hxx>
48 #include <fmtclds.hxx>
49 #include <fmtornt.hxx>
50 #include <frmatr.hxx>
51 #include <edtwin.hxx>
52 #include "view.hxx"
53 #include "wrtsh.hxx"
54 #include "basesh.hxx"
55 #include "cmdid.h"
56 #include "viewopt.hxx"
57 #include "tabcol.hxx"
58 #include "frmfmt.hxx"       // FrameFormat
59 #include "pagedesc.hxx"     // Aktuelles Seitenformat
60 #include "wview.hxx"
61 #include "fmtcol.hxx"
62 #include "section.hxx"
63 
64 // -> #i23726#
65 #include "ndtxt.hxx"
66 #include "pam.hxx"
67 // <- #i23726#
68 
69 #include <IDocumentSettingAccess.hxx>
70 
71 using namespace ::com::sun::star;
72 
73 
74 /*--------------------------------------------------------------------
75     Beschreibung:   Debug-Methode
76  --------------------------------------------------------------------*/
77 
78 
79 /*--------------------------------------------------------------------
80     Beschreibung:   Columns eintueten
81  --------------------------------------------------------------------*/
82 
83 
84 void lcl_FillSvxColumn(const SwFmtCol& rCol,
85                           sal_uInt16 nTotalWidth,
86                           SvxColumnItem& rColItem,
87                           long nDistance)
88 {
89     const SwColumns& rCols = rCol.GetColumns();
90     sal_uInt16 nWidth = 0;
91 
92     sal_Bool bOrtho = rCol.IsOrtho() && rCols.Count();
93     long nInnerWidth = 0;
94     if( bOrtho )
95     {
96         nInnerWidth = nTotalWidth;
97         for ( sal_uInt16 i = 0; i < rCols.Count(); ++i )
98         {
99             SwColumn* pCol = rCols[i];
100             nInnerWidth -= pCol->GetLeft() + pCol->GetRight();
101         }
102         if( nInnerWidth < 0 )
103             nInnerWidth = 0;
104         else
105             nInnerWidth /= rCols.Count();
106     }
107     for ( sal_uInt16 i = 0; i < rCols.Count(); ++i )
108     {
109         SwColumn* pCol = rCols[i];
110         const sal_uInt16 nStart = sal_uInt16(pCol->GetLeft() + nWidth + nDistance);
111         if( bOrtho )
112             nWidth = static_cast< sal_uInt16 >(nWidth + nInnerWidth + pCol->GetLeft() + pCol->GetRight());
113         else
114             nWidth = static_cast< sal_uInt16 >(nWidth + rCol.CalcColWidth(i, nTotalWidth));
115         const sal_uInt16 nEnd = sal_uInt16(nWidth - pCol->GetRight() + nDistance);
116 
117         SvxColumnDescription aColDesc(nStart, nEnd, sal_True);
118         rColItem.Append(aColDesc);
119     }
120 }
121 
122 /*--------------------------------------------------------------------
123     Beschreibung:   ColumnItem in ColumnInfo ueberfuehren
124  --------------------------------------------------------------------*/
125 
126 
127 void lcl_ConvertToCols(const SvxColumnItem& rColItem,
128                           sal_uInt16 nTotalWidth,
129                           SwFmtCol& rCols)
130 {
131     ASSERT( rCols.GetNumCols() == rColItem.Count(), "Column count mismatch" );
132     // #126939# ruler executes that change the columns shortly after the selection has changed
133     // can result in a crash
134     if(rCols.GetNumCols() != rColItem.Count())
135         return;
136 
137     sal_uInt16 nLeft    = 0;
138     SwTwips nSumAll= 0;  // Summiere alle Spalten und Raender auf
139 
140     SwColumns& rArr = rCols.GetColumns();
141 
142     // Tabcols der Reihe nach
143     for( sal_uInt16 i=0; i < rColItem.Count()-1; ++i )
144     {
145         DBG_ASSERT(rColItem[i+1].nStart >= rColItem[i].nEnd,"\201berlappende Spalten" );
146         sal_uInt16 nStart = static_cast< sal_uInt16 >(rColItem[i+1].nStart);
147         sal_uInt16 nEnd = static_cast< sal_uInt16 >(rColItem[i].nEnd);
148         if(nStart < nEnd)
149             nStart = nEnd;
150         const sal_uInt16 nDiff  = nStart - nEnd;
151         const sal_uInt16 nRight = nDiff / 2;
152 
153         sal_uInt16 nWidth = static_cast< sal_uInt16 >(rColItem[i].nEnd - rColItem[i].nStart);
154         nWidth += nLeft + nRight;
155 
156         SwColumn* pCol = rArr[i];
157         pCol->SetWishWidth( sal_uInt16(long(rCols.GetWishWidth()) * long(nWidth) /
158                                                             long(nTotalWidth) ));
159         pCol->SetLeft( nLeft );
160         pCol->SetRight( nRight );
161         nSumAll += pCol->GetWishWidth();
162 
163         nLeft = nRight;
164     }
165     rArr[rColItem.Count()-1]->SetLeft( nLeft );
166 
167     //Die Differenz aus der Gesamtwunschbreite und der Summe der bisher berechneten
168     // Spalten und Raender sollte die Breite der letzten Spalte ergeben.
169     rArr[rColItem.Count()-1]->SetWishWidth( rCols.GetWishWidth() - (sal_uInt16)nSumAll );
170 
171     rCols.SetOrtho(sal_False, 0, 0 );
172 }
173 
174 /*--------------------------------------------------------------------
175     Beschreibung:   Tabs loeschen
176  --------------------------------------------------------------------*/
177 
178 
179 void lcl_EraseDefTabs(SvxTabStopItem& rTabStops)
180 {
181     // Def Tabs loeschen
182     for ( sal_uInt16 i = 0; i < rTabStops.Count(); )
183     {
184         // Hier auch den DefTab auf Null rausschmeissen
185         if ( SVX_TAB_ADJUST_DEFAULT == rTabStops[i].GetAdjustment() ||
186             rTabStops[i].GetTabPos() == 0 )
187         {
188             rTabStops.Remove(i);
189             continue;
190         }
191         ++i;
192     }
193 }
194 
195 /*--------------------------------------------------------------------
196     Beschreibung:   Seitenrand umdrehen
197  --------------------------------------------------------------------*/
198 
199 
200 void SwView::SwapPageMargin(const SwPageDesc& rDesc, SvxLRSpaceItem& rLRSpace)
201 {
202     sal_uInt16 nPhyPage, nVirPage;
203     GetWrtShell().GetPageNum( nPhyPage, nVirPage );
204 
205     if ( rDesc.GetUseOn() == nsUseOnPage::PD_MIRROR && (nPhyPage % 2) == 0 )
206     {
207         long nTmp = rLRSpace.GetRight();
208         rLRSpace.SetRight( rLRSpace.GetLeft() );
209         rLRSpace.SetLeft( nTmp );
210     }
211 }
212 
213 /*--------------------------------------------------------------------
214     Beschreibung:   Wenn der Rahmenrand verschoben wird, sollen die
215                     Spaltentrenner an der gleichen absoluten Position bleiben
216  --------------------------------------------------------------------*/
217 
218 
219 void lcl_Scale(long& nVal, long nScale)
220 {
221     nVal *= nScale;
222     nVal >>= 8;
223 }
224 
225 void ResizeFrameCols(SwFmtCol& rCol,
226                     long nOldWidth,
227                     long nNewWidth,
228                     long nLeftDelta )
229 {
230     SwColumns& rArr = rCol.GetColumns();
231     long nWishSum = (long)rCol.GetWishWidth();
232     long nWishDiff = (nWishSum * 100/nOldWidth * nNewWidth) / 100 - nWishSum;
233     long nNewWishWidth = nWishSum + nWishDiff;
234     if(nNewWishWidth > 0xffffl)
235     {
236         // wenn die Wunschbreite zu gross wird, dann muessen alle Werte passend skaliert werden
237         long nScale = (0xffffl << 8)/ nNewWishWidth;
238         for(sal_uInt16 i = 0; i < rArr.Count(); i++)
239         {
240             SwColumn* pCol = rArr.GetObject(i);
241             long nVal = pCol->GetWishWidth();
242             lcl_Scale(nVal, nScale);
243             pCol->SetWishWidth((sal_uInt16) nVal);
244             nVal = pCol->GetLeft();
245             lcl_Scale(nVal, nScale);
246             pCol->SetLeft((sal_uInt16) nVal);
247             nVal = pCol->GetRight();
248             lcl_Scale(nVal, nScale);
249             pCol->SetRight((sal_uInt16) nVal);
250         }
251         lcl_Scale(nNewWishWidth, nScale);
252         lcl_Scale(nWishDiff, nScale);
253     }
254     rCol.SetWishWidth( (sal_uInt16) (nNewWishWidth) );
255 
256     if( nLeftDelta >= 2 || nLeftDelta <= -2)
257         rArr[0]->SetWishWidth(rArr[0]->GetWishWidth() + (sal_uInt16)nWishDiff);
258     else
259         rArr[rArr.Count()-1]->SetWishWidth(rArr[rArr.Count()-1]->GetWishWidth() + (sal_uInt16)nWishDiff);
260     //reset auto width
261     rCol.SetOrtho(sal_False, 0, 0 );
262 }
263 /*--------------------------------------------------------------------
264     Beschreibung:   Hier werden alle Aenderungen der Tableiste
265                     wieder in das Modell geschossen
266  --------------------------------------------------------------------*/
267 
268 
269 void SwView::ExecTabWin( SfxRequest& rReq )
270 {
271     SwWrtShell &rSh         = GetWrtShell();
272     const sal_uInt16 nFrmType   = rSh.IsObjSelected() ?
273                                     FRMTYPE_DRAWOBJ :
274                                         rSh.GetFrmType(0,sal_True);
275     const sal_Bool bFrmSelection = rSh.IsFrmSelected();
276     const sal_Bool bBrowse = rSh.GetViewOptions()->getBrowseMode();
277 
278     const sal_uInt16 nSlot      = rReq.GetSlot();
279     const sal_uInt16 nDescId    = rSh.GetCurPageDesc();
280     const SwPageDesc& rDesc = rSh.GetPageDesc( nDescId );
281 
282     const sal_Bool bVerticalWriting = rSh.IsInVerticalText();
283     const SwFmtHeader& rHeaderFmt = rDesc.GetMaster().GetHeader();
284     SwFrmFmt *pHeaderFmt = (SwFrmFmt*)rHeaderFmt.GetHeaderFmt();
285 
286     const SwFmtFooter& rFooterFmt = rDesc.GetMaster().GetFooter();
287     SwFrmFmt *pFooterFmt = (SwFrmFmt*)rFooterFmt.GetFooterFmt();
288 
289     const SwFmtFrmSize &rFrmSize = rDesc.GetMaster().GetFrmSize();
290 
291     const SwRect& rPageRect = rSh.GetAnyCurRect(RECT_PAGE);
292     const long nPageWidth  = bBrowse ? rPageRect.Width() : rFrmSize.GetWidth();
293     const long nPageHeight = bBrowse ? rPageRect.Height() : rFrmSize.GetHeight();
294 
295     sal_Bool bUnlockView = sal_False;
296     rSh.StartAllAction();
297     sal_Bool bSect = 0 != (nFrmType & FRMTYPE_COLSECT);
298 
299     switch  ( nSlot )
300     {
301     case SID_ATTR_LONG_LRSPACE:
302     {
303         SvxLongLRSpaceItem aLongLR( (const SvxLongLRSpaceItem&)rReq.GetArgs()->
304                                                     Get( SID_ATTR_LONG_LRSPACE ) );
305         SvxLRSpaceItem aLR(RES_LR_SPACE);
306         if ( !bSect && (bFrmSelection || nFrmType & FRMTYPE_FLY_ANY) )
307         {
308             SwFrmFmt* pFmt = ((SwFrmFmt*)rSh.GetFlyFrmFmt());
309             const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED);
310 
311             sal_Bool bVerticalFrame(sal_False);
312             {
313                 sal_Bool bRTL;
314                 sal_Bool bVertL2R;
315                 bVerticalFrame = ( bFrmSelection &&
316                                    rSh.IsFrmVertical(sal_True, bRTL, bVertL2R) ) ||
317                                  ( !bFrmSelection && bVerticalWriting);
318             }
319             long nDeltaX = bVerticalFrame ?
320                 rRect.Right() - rPageRect.Right() + aLongLR.GetRight() :
321                 rPageRect.Left() + aLongLR.GetLeft() - rRect.Left();
322 
323             SfxItemSet aSet( GetPool(), RES_FRM_SIZE, RES_FRM_SIZE,
324                                         RES_VERT_ORIENT, RES_HORI_ORIENT,
325                                         RES_COL, RES_COL, 0 );
326 
327             if(bVerticalFrame)
328             {
329                 SwFmtVertOrient aVertOrient(pFmt->GetVertOrient());
330                 aVertOrient.SetVertOrient(text::VertOrientation::NONE);
331                 aVertOrient.SetPos(aVertOrient.GetPos() + nDeltaX );
332                 aSet.Put( aVertOrient );
333             }
334             else
335             {
336                 SwFmtHoriOrient aHoriOrient( pFmt->GetHoriOrient() );
337                 aHoriOrient.SetHoriOrient( text::HoriOrientation::NONE );
338                 aHoriOrient.SetPos( aHoriOrient.GetPos() + nDeltaX );
339                 aSet.Put( aHoriOrient );
340             }
341 
342             SwFmtFrmSize aSize( pFmt->GetFrmSize() );
343             long nOldWidth = (long) aSize.GetWidth();
344 
345             if(aSize.GetWidthPercent())
346             {
347                 SwRect aRect;
348                 rSh.CalcBoundRect(aRect, FLY_AS_CHAR);
349                 long nPrtWidth = aRect.Width();
350                 aSize.SetWidthPercent(sal_uInt8((nPageWidth - aLongLR.GetLeft() - aLongLR.GetRight()) * 100 /nPrtWidth));
351             }
352             else
353                 aSize.SetWidth( nPageWidth -
354                         (aLongLR.GetLeft() + aLongLR.GetRight()));
355 
356             if( nFrmType & FRMTYPE_COLUMN )
357             {
358                 SwFmtCol aCol(pFmt->GetCol());
359 
360                 ::ResizeFrameCols(aCol, nOldWidth, (long)aSize.GetWidth(), nDeltaX );
361                 aSet.Put(aCol);
362             }
363 
364             aSet.Put( aSize );
365 
366             rSh.StartAction();
367             rSh.Push();
368             rSh.SetFlyFrmAttr( aSet );
369             //die Rahmenselektion wieder aufheben
370             if(!bFrmSelection && rSh.IsFrmSelected())
371             {
372                 rSh.UnSelectFrm();
373                 rSh.LeaveSelFrmMode();
374             }
375             rSh.Pop();
376             rSh.EndAction();
377         }
378         else if ( nFrmType & ( FRMTYPE_HEADER | FRMTYPE_FOOTER ))
379         {
380             // Seitenraender rausrechnen
381             long nOld = rDesc.GetMaster().GetLRSpace().GetLeft();
382             aLongLR.SetLeft( nOld > aLongLR.GetLeft() ? 0 : aLongLR.GetLeft() - nOld );
383 
384             nOld = rDesc.GetMaster().GetLRSpace().GetRight();
385             aLongLR.SetRight( nOld > (sal_uInt16)aLongLR.GetRight() ? 0 : aLongLR.GetRight() - nOld );
386             aLR.SetLeft((sal_uInt16)aLongLR.GetLeft());
387             aLR.SetRight((sal_uInt16)aLongLR.GetRight());
388 
389             if ( nFrmType & FRMTYPE_HEADER && pHeaderFmt )
390                 pHeaderFmt->SetFmtAttr( aLR );
391             else if( nFrmType & FRMTYPE_FOOTER && pFooterFmt )
392                 pFooterFmt->SetFmtAttr( aLR );
393         }
394         else if( nFrmType == FRMTYPE_DRAWOBJ)
395         {
396             SwRect aRect( rSh.GetObjRect() );
397             aRect.Left( aLongLR.GetLeft() + rPageRect.Left() );
398             aRect.Right( rPageRect.Right() - aLongLR.GetRight());
399             rSh.SetObjRect( aRect );
400         }
401         else if(bSect || rSh.IsDirectlyInSection())
402         {
403             //change the section indents and the columns if available
404             //at first determine the changes
405             SwRect aSectRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, 0);
406             const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, 0);
407             aSectRect.Pos() += aTmpRect.Pos();
408             long nLeftDiff = aLongLR.GetLeft() - (long)(aSectRect.Left() - rPageRect.Left() );
409             long nRightDiff = aLongLR.GetRight() - (long)( rPageRect.Right() - aSectRect.Right());
410             //change the LRSpaceItem of the section accordingly
411             const SwSection* pCurrSect = rSh.GetCurrSection();
412             const SwSectionFmt* pSectFmt = pCurrSect->GetFmt();
413             SvxLRSpaceItem aLRTmp = pSectFmt->GetLRSpace();
414             aLRTmp.SetLeft(aLRTmp.GetLeft() + nLeftDiff);
415             aLRTmp.SetRight(aLRTmp.GetRight() + nRightDiff);
416             SfxItemSet aSet(rSh.GetAttrPool(), RES_LR_SPACE, RES_LR_SPACE, RES_COL, RES_COL, 0L);
417             aSet.Put(aLRTmp);
418             //change the first/last column
419             if(bSect)
420             {
421                 SwFmtCol aCols( pSectFmt->GetCol() );
422                 long nDiffWidth = nLeftDiff + nRightDiff;
423                 ::ResizeFrameCols(aCols, aSectRect.Width(), aSectRect.Width() - nDiffWidth, nLeftDiff );
424                 aSet.Put( aCols );
425             }
426             SwSectionData aData(*pCurrSect);
427             rSh.UpdateSection(rSh.GetSectionFmtPos(*pSectFmt), aData, &aSet);
428         }
429         else
430         {   // Seitenraender einstellen
431             aLR.SetLeft((sal_uInt16)aLongLR.GetLeft());
432             aLR.SetRight((sal_uInt16)aLongLR.GetRight());
433             SwapPageMargin( rDesc, aLR );
434             SwPageDesc aDesc( rDesc );
435             aDesc.GetMaster().SetFmtAttr( aLR );
436             rSh.ChgPageDesc( nDescId, aDesc );
437         }
438     }
439     break;
440     case SID_ATTR_LONG_ULSPACE:
441     {
442         SvxLongULSpaceItem aLongULSpace( (const SvxLongULSpaceItem&)rReq.GetArgs()->
443                                                         Get( SID_ATTR_LONG_ULSPACE ));
444 
445         if( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY )
446         {
447             SwFrmFmt* pFmt = ((SwFrmFmt*)rSh.GetFlyFrmFmt());
448             const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED);
449             const long nDeltaY = rPageRect.Top() + aLongULSpace.GetUpper() - rRect.Top();
450             const long nHeight = nPageHeight - (aLongULSpace.GetUpper() + aLongULSpace.GetLower());
451 
452             SfxItemSet aSet( GetPool(), RES_FRM_SIZE, RES_FRM_SIZE,
453                                         RES_VERT_ORIENT, RES_HORI_ORIENT, 0 );
454             //which of the orientation attributes is to be put depends on the frame's environment
455             sal_Bool bRTL;
456             sal_Bool bVertL2R;
457             if ( ( bFrmSelection &&
458                    rSh.IsFrmVertical(sal_True, bRTL, bVertL2R ) ) ||
459                  ( !bFrmSelection && bVerticalWriting ) )
460             {
461                 SwFmtHoriOrient aHoriOrient(pFmt->GetHoriOrient());
462                 aHoriOrient.SetHoriOrient(text::HoriOrientation::NONE);
463                 aHoriOrient.SetPos(aHoriOrient.GetPos() + nDeltaY );
464                 aSet.Put( aHoriOrient );
465             }
466             else
467             {
468                 SwFmtVertOrient aVertOrient(pFmt->GetVertOrient());
469                 aVertOrient.SetVertOrient(text::VertOrientation::NONE);
470                 aVertOrient.SetPos(aVertOrient.GetPos() + nDeltaY );
471                 aSet.Put( aVertOrient );
472             }
473             SwFmtFrmSize aSize(pFmt->GetFrmSize());
474             if(aSize.GetHeightPercent())
475             {
476                 SwRect aRect;
477                 rSh.CalcBoundRect(aRect, FLY_AS_CHAR);
478                 long nPrtHeight = aRect.Height();
479                 aSize.SetHeightPercent(sal_uInt8(nHeight * 100 /nPrtHeight));
480             }
481             else
482                 aSize.SetHeight(nHeight );
483 
484             aSet.Put( aSize );
485             rSh.SetFlyFrmAttr( aSet );
486         }
487         else if( nFrmType == FRMTYPE_DRAWOBJ )
488         {
489             SwRect aRect( rSh.GetObjRect() );
490             aRect.Top( aLongULSpace.GetUpper() + rPageRect.Top() );
491             aRect.Bottom( rPageRect.Bottom() - aLongULSpace.GetLower() );
492             rSh.SetObjRect( aRect ) ;
493         }
494         else if(bVerticalWriting && (bSect || rSh.IsDirectlyInSection()))
495         {
496             //change the section indents and the columns if available
497             //at first determine the changes
498             SwRect aSectRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, 0);
499             const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, 0);
500             aSectRect.Pos() += aTmpRect.Pos();
501             const long nLeftDiff = aLongULSpace.GetUpper() - (long)(aSectRect.Top() - rPageRect.Top());
502             const long nRightDiff = aLongULSpace.GetLower() - (long)(nPageHeight - aSectRect.Bottom() + rPageRect.Top());
503             //change the LRSpaceItem of the section accordingly
504             const SwSection* pCurrSect = rSh.GetCurrSection();
505             const SwSectionFmt* pSectFmt = pCurrSect->GetFmt();
506             SvxLRSpaceItem aLR = pSectFmt->GetLRSpace();
507             aLR.SetLeft(aLR.GetLeft() + nLeftDiff);
508             aLR.SetRight(aLR.GetRight() + nRightDiff);
509             SfxItemSet aSet(rSh.GetAttrPool(), RES_LR_SPACE, RES_LR_SPACE, RES_COL, RES_COL, 0L);
510             aSet.Put(aLR);
511             //change the first/last column
512             if(bSect)
513             {
514                 SwFmtCol aCols( pSectFmt->GetCol() );
515                 long nDiffWidth = nLeftDiff + nRightDiff;
516                 ::ResizeFrameCols(aCols, aSectRect.Height(), aSectRect.Height() - nDiffWidth, nLeftDiff );
517                 aSet.Put( aCols );
518             }
519             SwSectionData aData(*pCurrSect);
520             rSh.UpdateSection(rSh.GetSectionFmtPos(*pSectFmt), aData, &aSet);
521         }
522         else
523         {   SwPageDesc aDesc( rDesc );
524 
525             if ( nFrmType & ( FRMTYPE_HEADER | FRMTYPE_FOOTER ))
526             {
527 
528                 const sal_Bool bHead = nFrmType & FRMTYPE_HEADER ? sal_True : sal_False;
529                 SvxULSpaceItem aUL( rDesc.GetMaster().GetULSpace() );
530                 if ( bHead )
531                     aUL.SetUpper( (sal_uInt16)aLongULSpace.GetUpper() );
532                 else
533                     aUL.SetLower( (sal_uInt16)aLongULSpace.GetLower() );
534                 aDesc.GetMaster().SetFmtAttr( aUL );
535 
536                 if( (bHead && pHeaderFmt) || (!bHead && pFooterFmt) )
537                 {
538                     SwFmtFrmSize aSz( bHead ? pHeaderFmt->GetFrmSize() :
539                                               pFooterFmt->GetFrmSize() );
540                     aSz.SetHeightSizeType( ATT_FIX_SIZE );
541                     aSz.SetHeight(nPageHeight - aLongULSpace.GetLower() -
542                                                 aLongULSpace.GetUpper() );
543                     if ( bHead )
544                         pHeaderFmt->SetFmtAttr( aSz );
545                     else
546                         pFooterFmt->SetFmtAttr( aSz );
547                 }
548             }
549             else
550             {
551                 SvxULSpaceItem aUL(RES_UL_SPACE);
552                 aUL.SetUpper((sal_uInt16)aLongULSpace.GetUpper());
553                 aUL.SetLower((sal_uInt16)aLongULSpace.GetLower());
554                 aDesc.GetMaster().SetFmtAttr(aUL);
555             }
556 
557             rSh.ChgPageDesc( nDescId, aDesc );
558         }
559     }
560     break;
561     case SID_ATTR_SWPAGE_COLUMN:
562     {
563         const SfxInt16Item aColumnItem( (const SfxInt16Item&)rReq.GetArgs()->Get(nSlot) );
564         const sal_uInt16 nPageColumnType = aColumnItem.GetValue();
565 
566         // nPageColumnType =
567         // 1 - single-columned page
568         // 2 - two-columned page
569         // 3 - three-columned page
570         // 4 - two-columned page with left column width of 2/3 of page width
571         // 5 - two-columned page with right column width of 2/3 of page width
572 
573         sal_uInt16 nCount = 2;
574         if ( nPageColumnType == 1 )
575         {
576             nCount = 0;
577         }
578         else if ( nPageColumnType == 3 )
579         {
580             nCount = 3;
581         }
582 
583         const sal_uInt16 nGutterWidth = 0;
584 
585         const SvxLRSpaceItem aLR( rDesc.GetMaster().GetLRSpace() );
586         const long nLeft = aLR.GetLeft();
587         const long nRight = aLR.GetRight();
588         const long nWidth = nPageWidth - nLeft - nRight;
589 
590         SwFmtCol aCols( rDesc.GetMaster().GetCol() );
591         aCols.Init( nCount, nGutterWidth, nWidth );
592         aCols.SetWishWidth( nWidth );
593         aCols.SetGutterWidth( nGutterWidth, nWidth );
594         aCols.SetOrtho( sal_False, nGutterWidth, nWidth );
595 
596         long nColumnLeft = 0;
597         long nColumnRight = 0;
598         if ( nPageColumnType == 4 )
599         {
600             nColumnRight = (long)(nWidth/3);
601             nColumnLeft = nWidth - nColumnRight;
602             aCols.GetColumns()[0]->SetWishWidth( nColumnLeft );
603             aCols.GetColumns()[1]->SetWishWidth( nColumnRight );
604         }
605         else if ( nPageColumnType == 5 )
606         {
607             nColumnLeft = (long)(nWidth/3);
608             nColumnRight = nWidth - nColumnLeft;
609             aCols.GetColumns()[0]->SetWishWidth( nColumnLeft );
610             aCols.GetColumns()[1]->SetWishWidth( nColumnRight );
611         }
612 
613         SwPageDesc aDesc( rDesc );
614         aDesc.GetMaster().SetFmtAttr( aCols );
615         rSh.ChgPageDesc( rSh.GetCurPageDesc(), aDesc );
616     }
617     break;
618     case SID_ATTR_TABSTOP_VERTICAL:
619     case SID_ATTR_TABSTOP:
620     {
621         sal_uInt16 nWhich = GetPool().GetWhich(nSlot);
622         SvxTabStopItem aTabStops( (const SvxTabStopItem&)rReq.GetArgs()->
623                                                     Get( nWhich ));
624         aTabStops.SetWhich(RES_PARATR_TABSTOP);
625         const SvxTabStopItem& rDefTabs =
626                     (const SvxTabStopItem&)rSh.GetDefault(RES_PARATR_TABSTOP);
627 
628         // Default-Tab an Pos 0
629         SfxItemSet aSet( GetPool(), RES_LR_SPACE, RES_LR_SPACE );
630         rSh.GetCurAttr( aSet );
631         const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)aSet.Get(RES_LR_SPACE);
632 
633         if ( rLR.GetTxtFirstLineOfst() < 0 )
634         {
635             SvxTabStop aSwTabStop( 0, SVX_TAB_ADJUST_DEFAULT );
636             aTabStops.Insert( aSwTabStop );
637         }
638 
639         // auffuellen mit Default-Tabs
640         sal_uInt16 nDef = ::GetTabDist( rDefTabs );
641         ::MakeDefTabs( nDef, aTabStops );
642 
643         SwTxtFmtColl* pColl = rSh.GetCurTxtFmtColl();
644         if( pColl && pColl->IsAutoUpdateFmt() )
645         {
646             SfxItemSet aTmp(GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP);
647             aTmp.Put(aTabStops);
648             rSh.AutoUpdatePara( pColl, aTmp );
649         }
650         else
651             rSh.SetAttr( aTabStops );
652         break;
653     }
654     case SID_ATTR_PARA_LRSPACE_VERTICAL:
655     case SID_ATTR_PARA_LRSPACE:
656     {
657         SvxLRSpaceItem aParaMargin((const SvxLRSpaceItem&)rReq.
658                                         GetArgs()->Get(nSlot));
659         if(nFrmType & FRMTYPE_FLY_ANY)
660         {
661             sal_Bool bFirstColumn = sal_True;
662             sal_Bool bLastColumn = sal_True;
663             if(nFrmType & FRMTYPE_COLUMN)
664             {
665                 sal_uInt16 nCurFrameCol = rSh.GetCurColNum() - 1;
666                 bFirstColumn = !nCurFrameCol;
667                 const SwFrmFmt* pFmt =  rSh.GetFlyFrmFmt();
668                 const SwFmtCol* pCols = &pFmt->GetCol();
669                 const SwColumns& rCols = pCols->GetColumns();
670                 sal_uInt16 nColumnCount = rCols.Count();
671                 bLastColumn = nColumnCount == nCurFrameCol + 1;
672             }
673         }
674         aParaMargin.SetRight( aParaMargin.GetRight() - nRightBorderDistance );
675         aParaMargin.SetTxtLeft(aParaMargin.GetTxtLeft() - nLeftBorderDistance );
676 
677         aParaMargin.SetWhich( RES_LR_SPACE );
678         SwTxtFmtColl* pColl = rSh.GetCurTxtFmtColl();
679 
680         // #i23726#
681         if (pNumRuleNodeFromDoc)
682         {
683             // --> FME 2005-02-22 #i42922# Mouse move of numbering label
684             // has to consider the left indent of the paragraph
685             SfxItemSet aSet( GetPool(), RES_LR_SPACE, RES_LR_SPACE );
686             rSh.GetCurAttr( aSet );
687             const SvxLRSpaceItem& rLR =
688                     static_cast<const SvxLRSpaceItem&>(aSet.Get(RES_LR_SPACE));
689             // <--
690 
691             SwPosition aPos(*pNumRuleNodeFromDoc);
692             // --> OD 2008-06-09 #i90078#
693             rSh.SetIndent( static_cast< short >(aParaMargin.GetTxtLeft() - rLR.GetTxtLeft()), aPos);
694             // <--
695             // --> OD 2005-02-18 #i42921# - invalidate state of indent in order
696             // to get a ruler update.
697             aParaMargin.SetWhich( nSlot );
698             GetViewFrame()->GetBindings().SetState( aParaMargin );
699             // <--
700         }
701         else if( pColl && pColl->IsAutoUpdateFmt() )
702         {
703             SfxItemSet aSet(GetPool(), RES_LR_SPACE, RES_LR_SPACE);
704             aSet.Put(aParaMargin);
705             rSh.AutoUpdatePara( pColl, aSet);
706         }
707         else
708             rSh.SetAttr( aParaMargin );
709 
710         if ( aParaMargin.GetTxtFirstLineOfst() < 0 )
711         {
712             SfxItemSet aSet( GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP );
713 
714             rSh.GetCurAttr( aSet );
715             const SvxTabStopItem&  rTabStops = (const SvxTabStopItem&)aSet.Get(RES_PARATR_TABSTOP);
716 
717             // Haben wir einen Tab an Stelle Null
718             sal_uInt16 i;
719 
720             for ( i = 0; i < rTabStops.Count(); ++i )
721                 if ( rTabStops[i].GetTabPos() == 0 )
722                     break;
723 
724             if ( i >= rTabStops.Count() )
725             {
726                 // Kein DefTab
727                 SvxTabStopItem aTabStops( RES_PARATR_TABSTOP );
728                 aTabStops = rTabStops;
729 
730                 ::lcl_EraseDefTabs(aTabStops);
731 
732                 SvxTabStop aSwTabStop( 0, SVX_TAB_ADJUST_DEFAULT );
733                 aTabStops.Insert(aSwTabStop);
734 
735                 const SvxTabStopItem& rDefTabs =
736                     (const SvxTabStopItem&)rSh.GetDefault(RES_PARATR_TABSTOP);
737                 sal_uInt16 nDef = ::GetTabDist(rDefTabs);
738                 ::MakeDefTabs( nDef, aTabStops );
739 
740                 if( pColl && pColl->IsAutoUpdateFmt())
741                 {
742                     SfxItemSet aSetTmp(GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP);
743                     aSetTmp.Put(aTabStops);
744                     rSh.AutoUpdatePara( pColl, aSetTmp );
745                 }
746                 else
747                     rSh.SetAttr( aTabStops );
748             }
749         }
750     }
751     break;
752     case SID_RULER_BORDERS_VERTICAL:
753     case SID_RULER_BORDERS:
754     {
755         SvxColumnItem aColItem((const SvxColumnItem&)rReq.
756                                             GetArgs()->Get(nSlot));
757 
758         if( bSetTabColFromDoc || (!bSect && rSh.GetTableFmt()) )
759         {
760             ASSERT(aColItem.Count(), "ColDesc ist leer!!");
761 
762             const sal_Bool bSingleLine = ((const SfxBoolItem&)rReq.
763                             GetArgs()->Get(SID_RULER_ACT_LINE_ONLY)).GetValue();
764 
765             SwTabCols aTabCols;
766             if ( bSetTabColFromDoc )
767                 rSh.GetMouseTabCols( aTabCols, aTabColFromDocPos );
768             else
769                 rSh.GetTabCols(aTabCols);
770 
771             // linker Tabellenrand
772             long nBorder = (long)(aColItem.GetLeft() - aTabCols.GetLeftMin());
773             aTabCols.SetLeft( nBorder );
774 
775             nBorder = (bVerticalWriting ? nPageHeight : nPageWidth) - aTabCols.GetLeftMin() - aColItem.GetRight();
776 
777 #ifdef DEBUG
778             long nTmp1 = nPageWidth;
779             long nTmp2 = aTabCols.GetLeftMin() + nBorder;
780             (void)nTmp1;
781             (void)nTmp2;
782 #endif
783 
784             if ( aColItem.GetRight() > 0 )
785                 aTabCols.SetRight( nBorder );
786 
787             // Tabcols der Reihe nach
788             // Die letzte Col wird durch den Rand definiert
789             //columns in right-to-left tables need to be mirrored
790             sal_Bool bIsTableRTL =
791                 IsTabColFromDoc() ?
792                       rSh.IsMouseTableRightToLeft(aTabColFromDocPos)
793                     : rSh.IsTableRightToLeft();
794             if(bIsTableRTL)
795             {
796                 sal_uInt16 nColCount = aColItem.Count() - 1;
797                 for ( sal_uInt16 i = 0; i < nColCount; ++i )
798                 {
799                     const SvxColumnDescription& rCol = aColItem[nColCount - i];
800                     aTabCols[i] = aTabCols.GetRight() - rCol.nStart;
801                     aTabCols.SetHidden( i, !rCol.bVisible );
802                 }
803             }
804             else
805             {
806                 for ( sal_uInt16 i = 0; i < aColItem.Count()-1; ++i )
807                 {
808                     const SvxColumnDescription& rCol = aColItem[i];
809                     aTabCols[i] = rCol.nEnd + aTabCols.GetLeft();
810                     aTabCols.SetHidden( i, !rCol.bVisible );
811                 }
812             }
813 
814             if ( bSetTabColFromDoc )
815             {
816                 if( !rSh.IsViewLocked() )
817                 {
818                     bUnlockView = sal_True;
819                     rSh.LockView( sal_True );
820                 }
821                 rSh.SetMouseTabCols( aTabCols, bSingleLine,
822                                                aTabColFromDocPos );
823             }
824             else
825                 rSh.SetTabCols(aTabCols, bSingleLine);
826 
827         }
828         else
829         {
830             if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY || bSect)
831             {
832                 SwSectionFmt *pSectFmt = 0;
833                 SfxItemSet aSet( GetPool(), RES_COL, RES_COL );
834                 if(bSect)
835                 {
836                     const SwSection *pSect = rSh.GetAnySection();
837                     ASSERT( pSect, "Welcher Bereich?");
838                     pSectFmt = pSect->GetFmt();
839                 }
840                 else
841                 {
842                     rSh.GetFlyFrmAttr( aSet );
843                 }
844                 SwFmtCol aCols(
845                     bSect ?
846                         pSectFmt->GetCol() :
847                             (const SwFmtCol&)aSet.Get( RES_COL, sal_False ));
848                 SwRect aCurRect = rSh.GetAnyCurRect(bSect ? RECT_SECTION_PRT : RECT_FLY_PRT_EMBEDDED);
849                 const long lWidth = bVerticalWriting ? aCurRect.Height() : aCurRect.Width();
850                 ::lcl_ConvertToCols( aColItem, sal_uInt16(lWidth), aCols );
851                 aSet.Put( aCols );
852                 if(bSect)
853                     rSh.SetSectionAttr( aSet, pSectFmt );
854                 else
855                 {
856                     rSh.StartAction();
857                     rSh.Push();
858                     rSh.SetFlyFrmAttr( aSet );
859                     //die Rahmenselektion wieder aufheben
860                     if(!bFrmSelection && rSh.IsFrmSelected())
861                     {
862                         rSh.UnSelectFrm();
863                         rSh.LeaveSelFrmMode();
864                     }
865                     rSh.Pop();
866                     rSh.EndAction();
867                 }
868             }
869             else
870             {
871                 SwFmtCol aCols( rDesc.GetMaster().GetCol() );
872                 const SwRect aPrtRect = rSh.GetAnyCurRect(RECT_PAGE_PRT);
873                 ::lcl_ConvertToCols( aColItem,
874                     sal_uInt16(bVerticalWriting ? aPrtRect.Height() : aPrtRect.Width()),
875                                 aCols );
876                 SwPageDesc aDesc( rDesc );
877                 aDesc.GetMaster().SetFmtAttr( aCols );
878                 rSh.ChgPageDesc( rSh.GetCurPageDesc(), aDesc );
879             }
880         }
881     }
882     break;
883 
884     case SID_RULER_ROWS :
885     case SID_RULER_ROWS_VERTICAL:
886     {
887         SvxColumnItem aColItem((const SvxColumnItem&)rReq.
888                                             GetArgs()->Get(nSlot));
889 
890         if( bSetTabColFromDoc || (!bSect && rSh.GetTableFmt()) )
891         {
892             ASSERT(aColItem.Count(), "ColDesc ist leer!!");
893 
894             SwTabCols aTabCols;
895             if ( bSetTabRowFromDoc )
896                 rSh.GetMouseTabRows( aTabCols, aTabColFromDocPos );
897             else
898                 rSh.GetTabRows(aTabCols);
899 
900             if ( bVerticalWriting )
901             {
902                 aTabCols.SetRight(nPageWidth - aColItem.GetRight() - aColItem.GetLeft());
903                 aTabCols.SetLeftMin(aColItem.GetLeft());
904             }
905             else
906             {
907                 long nBorder = nPageHeight - aTabCols.GetLeftMin() - aColItem.GetRight();
908                 aTabCols.SetRight( nBorder );
909             }
910 
911             if(bVerticalWriting)
912             {
913                 for ( sal_uInt16 i = aColItem.Count() - 1; i; --i )
914                 {
915                     const SvxColumnDescription& rCol = aColItem[i - 1];
916                     long nColumnPos = aTabCols.GetRight() - rCol.nEnd ;
917                     aTabCols[i - 1] = nColumnPos;
918                     aTabCols.SetHidden( i - 1, !rCol.bVisible );
919                 }
920             }
921             else
922             {
923                 for ( sal_uInt16 i = 0; i < aColItem.Count()-1; ++i )
924                 {
925                     const SvxColumnDescription& rCol = aColItem[i];
926                     aTabCols[i] = rCol.nEnd + aTabCols.GetLeft();
927                     aTabCols.SetHidden( i, !rCol.bVisible );
928                 }
929             }
930             sal_Bool bSingleLine = sal_False;
931             const SfxPoolItem* pSingleLine;
932             if( SFX_ITEM_SET == rReq.GetArgs()->GetItemState(SID_RULER_ACT_LINE_ONLY, sal_False, &pSingleLine))
933                 bSingleLine = ((const SfxBoolItem*)pSingleLine)->GetValue();
934             if ( bSetTabRowFromDoc )
935             {
936                 if( !rSh.IsViewLocked() )
937                 {
938                     bUnlockView = sal_True;
939                     rSh.LockView( sal_True );
940                 }
941                 rSh.SetMouseTabRows( aTabCols, bSingleLine, aTabColFromDocPos );
942             }
943             else
944                 rSh.SetTabRows(aTabCols, bSingleLine);
945         }
946     }
947     break;
948 
949     default:
950         ASSERT( !this, "Falsche SlotId");
951     }
952     rSh.EndAllAction();
953 
954     if( bUnlockView )
955         rSh.LockView( sal_False );
956 
957     bSetTabColFromDoc = bSetTabRowFromDoc = bTabColFromDoc = bTabRowFromDoc = sal_False;
958     SetNumRuleNodeFromDoc(NULL);
959 }
960 
961 /*--------------------------------------------------------------------
962     Beschreibung:   Hier wird der Status der Tableiste ermittelt
963                     sprich alle relevanten Attribute an der CursorPos
964                     werden der Tableiste uebermittelt
965  --------------------------------------------------------------------*/
966 
967 
968 void SwView::StateTabWin(SfxItemSet& rSet)
969 {
970     SwWrtShell &rSh         = GetWrtShell();
971 
972     const Point* pPt = IsTabColFromDoc() || IsTabRowFromDoc() ? &aTabColFromDocPos : 0;
973     const sal_uInt16 nFrmType   = rSh.IsObjSelected()
974                 ? FRMTYPE_DRAWOBJ
975                 : rSh.GetFrmType( pPt, sal_True );
976 
977     const sal_Bool  bFrmSelection = rSh.IsFrmSelected();
978     const sal_Bool bBrowse = rSh.GetViewOptions()->getBrowseMode();
979     // PageOffset/Begrenzer
980     const SwRect& rPageRect = rSh.GetAnyCurRect( RECT_PAGE, pPt );
981     const SwRect& rPagePrtRect = rSh.GetAnyCurRect( RECT_PAGE_PRT, pPt );
982     const long nPageWidth  = rPageRect.Width();
983     const long nPageHeight = rPageRect.Height();
984 
985     const SwPageDesc& rDesc = rSh.GetPageDesc(
986                 IsTabColFromDoc() || bTabRowFromDoc ?
987                     rSh.GetMousePageDesc(aTabColFromDocPos) : rSh.GetCurPageDesc() );
988 
989     const SvxFrameDirectionItem& rFrameDir = rDesc.GetMaster().GetFrmDir();
990     const sal_Bool bVerticalWriting = rSh.IsInVerticalText();
991 
992     //enable tab stop display on the rulers depending on the writing direction
993     WinBits nRulerStyle = pHRuler->GetStyle() & ~WB_EXTRAFIELD;
994     pHRuler->SetStyle(bVerticalWriting||bBrowse ? nRulerStyle : nRulerStyle|WB_EXTRAFIELD);
995     nRulerStyle = pVRuler->GetStyle() & ~WB_EXTRAFIELD;
996     pVRuler->SetStyle(bVerticalWriting ? nRulerStyle|WB_EXTRAFIELD : nRulerStyle);
997 
998     //#i24363# tab stops relative to indent
999     bool bRelative = rSh.getIDocumentSettingAccess()->get(IDocumentSettingAccess::TABS_RELATIVE_TO_INDENT);
1000     pHRuler->SetTabsRelativeToIndent( bRelative );
1001     pVRuler->SetTabsRelativeToIndent( bRelative );
1002 
1003     SvxLRSpaceItem aPageLRSpace( rDesc.GetMaster().GetLRSpace() );
1004     SwapPageMargin( rDesc, aPageLRSpace );
1005 
1006     SfxItemSet aCoreSet( GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP,
1007                                     RES_LR_SPACE,        RES_UL_SPACE, 0 );
1008     // --> OD 2008-01-17 #newlistlevelattrs#
1009     // get also the list level indent values merged as LR-SPACE item, if needed.
1010     rSh.GetCurAttr( aCoreSet, true );
1011     // <--
1012     SelectionType nSelType = rSh.GetSelectionType();
1013 
1014     SfxWhichIter aIter( rSet );
1015     sal_uInt16 nWhich = aIter.FirstWhich();
1016     sal_Bool bPutContentProtection = sal_False;
1017 
1018     while ( nWhich )
1019     {
1020         switch ( nWhich )
1021         {
1022         case SID_ATTR_SWPAGE_COLUMN:
1023         {
1024             sal_uInt16 nColumnType = 0;
1025 
1026             const SwFrmFmt& rMaster = rDesc.GetMaster();
1027             SwFmtCol aCol(rMaster.GetCol());
1028             const sal_uInt16 nCols = aCol.GetNumCols();
1029             if ( nCols == 0 )
1030             {
1031                 nColumnType = 1;
1032             }
1033             else if ( nCols == 2 )
1034             {
1035                 const sal_uInt16 nColLeft = aCol.CalcPrtColWidth(0, aCol.GetWishWidth());
1036                 const sal_uInt16 nColRight = aCol.CalcPrtColWidth(1, aCol.GetWishWidth());
1037 
1038                 if ( abs(nColLeft - nColRight) <= 10 )
1039                 {
1040                     nColumnType = 2;
1041                 }
1042                 else if( abs(nColLeft - nColRight*2) < 20 )
1043                 {
1044                     nColumnType = 4;
1045                 }
1046                 else if( abs(nColLeft*2 - nColRight) < 20 )
1047                 {
1048                     nColumnType = 5;
1049                 }
1050             }
1051             else if( nCols == 3 )
1052             {
1053                 nColumnType = 3;
1054             }
1055 
1056             rSet.Put( SfxInt16Item( SID_ATTR_SWPAGE_COLUMN, nColumnType ) );
1057         }
1058         break;
1059 //        case RES_LR_SPACE:
1060 //        case SID_ATTR_LRSPACE:
1061         case SID_ATTR_LONG_LRSPACE:
1062         {
1063             SvxLongLRSpaceItem aLongLR( (long)aPageLRSpace.GetLeft(),
1064                                         (long)aPageLRSpace.GetRight(),
1065                                         SID_ATTR_LONG_LRSPACE);
1066             if(bBrowse)
1067             {
1068                 aLongLR.SetLeft(rPagePrtRect.Left());
1069                 aLongLR.SetRight(nPageWidth - rPagePrtRect.Right());
1070             }
1071             if ( ( nFrmType & FRMTYPE_HEADER || nFrmType & FRMTYPE_FOOTER ) &&
1072                  !(nFrmType & FRMTYPE_COLSECT) )
1073             {
1074                 SwFrmFmt *pFmt = (SwFrmFmt*) (nFrmType & FRMTYPE_HEADER ?
1075                                 rDesc.GetMaster().GetHeader().GetHeaderFmt() :
1076                                 rDesc.GetMaster().GetFooter().GetFooterFmt());
1077                 if( pFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash
1078                 {
1079                     SwRect aRect( rSh.GetAnyCurRect( RECT_HEADERFOOTER, pPt));
1080                     aRect.Pos() -= rSh.GetAnyCurRect( RECT_PAGE, pPt ).Pos();
1081                     const SvxLRSpaceItem& aLR = pFmt->GetLRSpace();
1082                     aLongLR.SetLeft ( (long)aLR.GetLeft() + (long)aRect.Left() );
1083                     aLongLR.SetRight( (nPageWidth -
1084                                         (long)aRect.Right() + (long)aLR.GetRight()));
1085                 }
1086             }
1087             else
1088             {
1089                 SwRect aRect;
1090                 if( !bFrmSelection && ((nFrmType & FRMTYPE_COLSECT) || rSh.IsDirectlyInSection()) )
1091                 {
1092                     aRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, pPt);
1093                     const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, pPt);
1094                     aRect.Pos() += aTmpRect.Pos();
1095                 }
1096 
1097                 else if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY )
1098                     aRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt);
1099                 else if( nFrmType & FRMTYPE_DRAWOBJ)
1100                     aRect = rSh.GetObjRect();
1101 
1102                 if( aRect.Width() )
1103                 {
1104                     // PAGES01
1105                     // make relative to page position:
1106                     aLongLR.SetLeft ((long)( aRect.Left() - rPageRect.Left() ));
1107                     aLongLR.SetRight((long)( rPageRect.Right() - aRect.Right()));
1108                 }
1109             }
1110             if( nWhich == SID_ATTR_LONG_LRSPACE )
1111                 rSet.Put( aLongLR );
1112             else
1113             {
1114                 SvxLRSpaceItem aLR( aLongLR.GetLeft(),
1115                                     aLongLR.GetRight(),
1116                                     0, 0,
1117                                     nWhich);
1118                 rSet.Put(aLR);
1119             }
1120             break;
1121         }
1122         case SID_ATTR_LONG_ULSPACE:
1123 //        case SID_ATTR_ULSPACE:
1124 //        case RES_UL_SPACE:
1125         {
1126             // Rand Seite Oben Unten
1127             SvxULSpaceItem aUL( rDesc.GetMaster().GetULSpace() );
1128             SvxLongULSpaceItem aLongUL( (long)aUL.GetUpper(),
1129                                         (long)aUL.GetLower(),
1130                                         SID_ATTR_LONG_ULSPACE);
1131 
1132             if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY )
1133             {
1134                 // Dokumentkoordinaten Frame auf Seitenkoordinaten umbrechen
1135                 const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt);
1136                 aLongUL.SetUpper((sal_uInt16)(rRect.Top() - rPageRect.Top() ));
1137                 aLongUL.SetLower((sal_uInt16)(rPageRect.Bottom() - rRect.Bottom() ));
1138             }
1139             else if ( nFrmType & FRMTYPE_HEADER || nFrmType & FRMTYPE_FOOTER )
1140             {
1141                 SwRect aRect( rSh.GetAnyCurRect( RECT_HEADERFOOTER, pPt));
1142                 aRect.Pos() -= rSh.GetAnyCurRect( RECT_PAGE, pPt ).Pos();
1143                 aLongUL.SetUpper( (sal_uInt16)aRect.Top() );
1144                 aLongUL.SetLower( (sal_uInt16)(nPageHeight - aRect.Bottom()) );
1145             }
1146             else if( nFrmType & FRMTYPE_DRAWOBJ)
1147             {
1148                 const SwRect &rRect = rSh.GetObjRect();
1149                 aLongUL.SetUpper((rRect.Top() - rPageRect.Top()));
1150                 aLongUL.SetLower((rPageRect.Bottom() - rRect.Bottom()));
1151             }
1152             else if(bBrowse)
1153             {
1154                 aLongUL.SetUpper(rPagePrtRect.Top());
1155                 aLongUL.SetLower(nPageHeight - rPagePrtRect.Bottom());
1156             }
1157             if( nWhich == SID_ATTR_LONG_ULSPACE )
1158                 rSet.Put( aLongUL );
1159             else
1160             {
1161                 SvxULSpaceItem aULTmp((sal_uInt16)aLongUL.GetUpper(),
1162                                       (sal_uInt16)aLongUL.GetLower(),
1163                                       nWhich);
1164                 rSet.Put(aULTmp);
1165             }
1166             break;
1167         }
1168         case SID_ATTR_TABSTOP_VERTICAL :
1169         case RES_PARATR_TABSTOP:
1170         {
1171             if ( ISA( SwWebView ) ||
1172                  IsTabColFromDoc() ||
1173                  IsTabRowFromDoc() ||
1174                  ( nSelType & nsSelectionType::SEL_GRF) ||
1175                     (nSelType & nsSelectionType::SEL_FRM) ||
1176                     (nSelType & nsSelectionType::SEL_OLE) ||
1177                     SFX_ITEM_AVAILABLE > aCoreSet.GetItemState(RES_LR_SPACE)||
1178                     (!bVerticalWriting && (SID_ATTR_TABSTOP_VERTICAL == nWhich))||
1179                     (bVerticalWriting && (RES_PARATR_TABSTOP == nWhich))
1180                  )
1181                 rSet.DisableItem( nWhich );
1182             else
1183             {
1184                 SvxTabStopItem aTabStops((const SvxTabStopItem&)
1185                                             aCoreSet.Get( RES_PARATR_TABSTOP ));
1186 
1187                 const SvxTabStopItem& rDefTabs = (const SvxTabStopItem&)
1188                                             rSh.GetDefault(RES_PARATR_TABSTOP);
1189 
1190                 DBG_ASSERT(pHRuler, "warum ist das Lineal nicht da?");
1191                 long nDefTabDist = ::GetTabDist(rDefTabs);
1192                 pHRuler->SetDefTabDist( nDefTabDist );
1193                 pVRuler->SetDefTabDist( nDefTabDist );
1194                 ::lcl_EraseDefTabs(aTabStops);
1195                 rSet.Put(aTabStops, nWhich);
1196             }
1197             break;
1198         }
1199         case SID_ATTR_PARA_LRSPACE_VERTICAL:
1200         case SID_ATTR_PARA_LRSPACE:
1201         {
1202             if ( nSelType & nsSelectionType::SEL_GRF ||
1203                     nSelType & nsSelectionType::SEL_FRM ||
1204                     nSelType & nsSelectionType::SEL_OLE ||
1205                     nFrmType == FRMTYPE_DRAWOBJ ||
1206                     (!bVerticalWriting && (SID_ATTR_PARA_LRSPACE_VERTICAL == nWhich))||
1207                     (bVerticalWriting && (SID_ATTR_PARA_LRSPACE == nWhich))
1208                     )
1209             {
1210                 rSet.DisableItem(nWhich);
1211             }
1212             else
1213             {
1214                 SvxLRSpaceItem aLR( RES_LR_SPACE );
1215                 if ( !IsTabColFromDoc() )
1216                 {
1217                     aLR = (const SvxLRSpaceItem&)aCoreSet.Get(RES_LR_SPACE);
1218 
1219                     // #i23726#
1220                     if (pNumRuleNodeFromDoc)
1221                     {
1222                         short nOffset = static_cast< short >(aLR.GetTxtLeft() +
1223                                         // --> FME 2005-02-22 #i42922# Mouse move of numbering label
1224                                         // has to consider the left indent of the paragraph
1225                                         pNumRuleNodeFromDoc->GetLeftMarginWithNum( sal_True ) );
1226                                        // <--
1227 
1228                         short nFLOffset;
1229                         pNumRuleNodeFromDoc->GetFirstLineOfsWithNum( nFLOffset );
1230 
1231                         aLR.SetLeft( nOffset + nFLOffset );
1232                     }
1233                 }
1234                 aLR.SetWhich(nWhich);
1235                 rSet.Put(aLR);
1236             }
1237         break;
1238         }
1239         case SID_RULER_BORDER_DISTANCE:
1240         {
1241             nLeftBorderDistance = 0;
1242             nRightBorderDistance = 0;
1243             if ( nSelType & nsSelectionType::SEL_GRF ||
1244                     nSelType & nsSelectionType::SEL_FRM ||
1245                     nSelType & nsSelectionType::SEL_OLE ||
1246                     nFrmType == FRMTYPE_DRAWOBJ )
1247                 rSet.DisableItem(SID_RULER_BORDER_DISTANCE);
1248             else
1249             {
1250                 SvxLRSpaceItem aDistLR(SID_RULER_BORDER_DISTANCE);
1251                 if(nFrmType & FRMTYPE_FLY_ANY)
1252                 {
1253                     if( IsTabColFromDoc() )
1254                     {
1255                         const SwRect& rFlyPrtRect = rSh.GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, pPt );
1256                         aDistLR.SetLeft(rFlyPrtRect.Left());
1257                         aDistLR.SetRight(rFlyPrtRect.Left());
1258                     }
1259                     else
1260                     {
1261                         SfxItemSet aCoreSet2( GetPool(),
1262                                                 RES_BOX, RES_BOX,
1263                                                 SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 );
1264                         SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER );
1265                         aCoreSet.Put( aBoxInfo );
1266                         rSh.GetFlyFrmAttr( aCoreSet );
1267                         const SvxBoxItem& rBox = (const SvxBoxItem&)aCoreSet.Get(RES_BOX);
1268                         aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT ));
1269                         aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT));
1270 
1271                         //add the paragraph border distance
1272                         SfxItemSet aCoreSet1( GetPool(),
1273                                                 RES_BOX, RES_BOX,
1274                                                 0 );
1275                         rSh.GetCurAttr( aCoreSet1 );
1276                         const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSet1.Get(RES_BOX);
1277                         aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT ));
1278                         aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT));
1279                     }
1280                     rSet.Put(aDistLR);
1281                     nLeftBorderDistance  = static_cast< sal_uInt16 >(aDistLR.GetLeft());
1282                     nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight());
1283                 }
1284                 else if ( IsTabColFromDoc() ||
1285                     ( rSh.GetTableFmt() && !bFrmSelection &&
1286                     !(nFrmType & FRMTYPE_COLSECT ) ) )
1287                 {
1288                     SfxItemSet aCoreSet2( GetPool(),
1289                                             RES_BOX, RES_BOX,
1290                                             SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 );
1291                     SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER );
1292                     aBoxInfo.SetTable(sal_False);
1293                     aBoxInfo.SetDist((sal_Bool) sal_True);
1294                     aCoreSet2.Put(aBoxInfo);
1295                     rSh.GetTabBorders( aCoreSet2 );
1296                     const SvxBoxItem& rBox = (const SvxBoxItem&)aCoreSet2.Get(RES_BOX);
1297                     aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT ));
1298                     aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT));
1299 
1300                     //add the border distance of the paragraph
1301                     SfxItemSet aCoreSet1( GetPool(),
1302                                             RES_BOX, RES_BOX,
1303                                             0 );
1304                     rSh.GetCurAttr( aCoreSet1 );
1305                     const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSet1.Get(RES_BOX);
1306                     aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT ));
1307                     aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT));
1308                     rSet.Put(aDistLR);
1309                     nLeftBorderDistance  = static_cast< sal_uInt16 >(aDistLR.GetLeft());
1310                     nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight());
1311                 }
1312                 else if ( !rSh.IsDirectlyInSection() )
1313                 {
1314                     //get the page/header/footer border distance
1315                     const SwFrmFmt& rMaster = rDesc.GetMaster();
1316                     const SvxBoxItem& rBox = (const SvxBoxItem&)rMaster.GetAttrSet().Get(RES_BOX);
1317                     aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT ));
1318                     aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT));
1319 
1320                     const SvxBoxItem* pBox = 0;
1321                     if(nFrmType & FRMTYPE_HEADER)
1322                     {
1323                         rMaster.GetHeader();
1324                         const SwFmtHeader& rHeaderFmt = rMaster.GetHeader();
1325                         SwFrmFmt *pHeaderFmt = (SwFrmFmt*)rHeaderFmt.GetHeaderFmt();
1326                         if( pHeaderFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash
1327                             pBox = & (const SvxBoxItem&)pHeaderFmt->GetBox();
1328                     }
1329                     else if(nFrmType & FRMTYPE_FOOTER )
1330                     {
1331                         const SwFmtFooter& rFooterFmt = rMaster.GetFooter();
1332                         SwFrmFmt *pFooterFmt = (SwFrmFmt*)rFooterFmt.GetFooterFmt();
1333                         if( pFooterFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash
1334                             pBox = & (const SvxBoxItem&)pFooterFmt->GetBox();
1335                     }
1336                     if(pBox)
1337                     {
1338                         aDistLR.SetLeft((sal_uInt16)pBox->GetDistance(BOX_LINE_LEFT ));
1339                         aDistLR.SetRight((sal_uInt16)pBox->GetDistance(BOX_LINE_RIGHT));
1340                     }
1341 
1342                     //add the border distance of the paragraph
1343                     SfxItemSet aCoreSetTmp( GetPool(),
1344                                             RES_BOX, RES_BOX,
1345                                             SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 );
1346                     rSh.GetCurAttr( aCoreSetTmp );
1347                     const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSetTmp.Get(RES_BOX);
1348                     aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT ));
1349                     aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT));
1350                     rSet.Put(aDistLR);
1351                     nLeftBorderDistance  = static_cast< sal_uInt16 >(aDistLR.GetLeft());
1352                     nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight());
1353                 }
1354             }
1355         }
1356         break;
1357         case SID_RULER_TEXT_RIGHT_TO_LEFT:
1358         {
1359             if ( nSelType & nsSelectionType::SEL_GRF ||
1360                     nSelType & nsSelectionType::SEL_FRM ||
1361                     nSelType & nsSelectionType::SEL_OLE ||
1362                     nFrmType == FRMTYPE_DRAWOBJ)
1363                 rSet.DisableItem(nWhich);
1364             else
1365             {
1366                 sal_Bool bFlag = rSh.IsInRightToLeftText();
1367                 rSet.Put(SfxBoolItem(nWhich, bFlag));
1368             }
1369         }
1370         break;
1371         case SID_RULER_BORDERS_VERTICAL:
1372         case SID_RULER_BORDERS:
1373         {
1374             sal_Bool bFrameHasVerticalColumns(sal_False);
1375             {
1376                 sal_Bool bFrameRTL;
1377                 sal_Bool bFrameVertL2R;
1378                 bFrameHasVerticalColumns = rSh.IsFrmVertical(sal_False, bFrameRTL, bFrameVertL2R) &&
1379                                            bFrmSelection;
1380             }
1381             sal_Bool bHasTable = ( IsTabColFromDoc() ||
1382                     ( rSh.GetTableFmt() && !bFrmSelection &&
1383                     !(nFrmType & FRMTYPE_COLSECT ) ) );
1384 
1385             sal_Bool bTableVertical = bHasTable && rSh.IsTableVertical();
1386 
1387             if( ( (SID_RULER_BORDERS_VERTICAL == nWhich) &&
1388                     ((bHasTable && !bTableVertical)||
1389                         (!bVerticalWriting && !bFrmSelection && !bHasTable ) || (bFrmSelection && !bFrameHasVerticalColumns)) ) ||
1390                 ((SID_RULER_BORDERS == nWhich) &&
1391                     ((bHasTable && bTableVertical)||
1392                         (bVerticalWriting && !bFrmSelection&& !bHasTable) || bFrameHasVerticalColumns)))
1393                 rSet.DisableItem(nWhich);
1394             else if ( bHasTable )
1395             {
1396                 SwTabCols aTabCols;
1397                 sal_uInt16    nNum;
1398                 if ( 0 != ( bSetTabColFromDoc = IsTabColFromDoc() ) )
1399                 {
1400                     rSh.GetMouseTabCols( aTabCols, aTabColFromDocPos );
1401                     nNum = rSh.GetCurMouseTabColNum( aTabColFromDocPos );
1402                 }
1403                 else
1404                 {
1405                     rSh.GetTabCols( aTabCols );
1406                     nNum = rSh.GetCurTabColNum();
1407                     if(rSh.IsTableRightToLeft())
1408                         nNum = aTabCols.Count() - nNum;
1409                 }
1410 
1411                 ASSERT(nNum <= aTabCols.Count(), "TabCol not found");
1412                 const int nLft = aTabCols.GetLeftMin() + aTabCols.GetLeft();
1413                 const int nRgt = (sal_uInt16)(bTableVertical ? nPageHeight : nPageWidth) -
1414                                   (aTabCols.GetLeftMin() +
1415                                   aTabCols.GetRight());
1416 
1417                 const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0);
1418                 const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0);
1419 
1420                 SvxColumnItem aColItem(nNum, nL, nR);
1421 
1422                 sal_uInt16 nStart = 0,
1423                        nEnd;
1424 
1425                 //columns in right-to-left tables need to be mirrored
1426                 sal_Bool bIsTableRTL =
1427                     IsTabColFromDoc() ?
1428                           rSh.IsMouseTableRightToLeft(aTabColFromDocPos)
1429                         : rSh.IsTableRightToLeft();
1430                 if(bIsTableRTL)
1431                 {
1432                     for ( sal_uInt16 i = aTabCols.Count(); i ; --i )
1433                     {
1434                         const SwTabColsEntry& rEntry = aTabCols.GetEntry( i - 1 );
1435                         nEnd  = (sal_uInt16)aTabCols.GetRight();
1436                         nEnd  = nEnd - (sal_uInt16)rEntry.nPos;
1437                         SvxColumnDescription aColDesc( nStart, nEnd,
1438                                     (sal_uInt16(aTabCols.GetRight() - rEntry.nMax)),
1439                                     (sal_uInt16(aTabCols.GetRight() - rEntry.nMin)),
1440                                                     !aTabCols.IsHidden(i - 1) );
1441                         aColItem.Append(aColDesc);
1442                         nStart = nEnd;
1443                     }
1444                     SvxColumnDescription aColDesc(nStart,
1445                                     aTabCols.GetRight() - aTabCols.GetLeft(), sal_True);
1446                     aColItem.Append(aColDesc);
1447                 }
1448                 else
1449                 {
1450                     for ( sal_uInt16 i = 0; i < aTabCols.Count(); ++i )
1451                     {
1452                         const SwTabColsEntry& rEntry = aTabCols.GetEntry( i );
1453                         nEnd  = static_cast< sal_uInt16 >(rEntry.nPos - aTabCols.GetLeft());
1454                         SvxColumnDescription aColDesc( nStart, nEnd,
1455                                 rEntry.nMin - aTabCols.GetLeft(), rEntry.nMax - aTabCols.GetLeft(),
1456                                                     !aTabCols.IsHidden(i) );
1457                         aColItem.Append(aColDesc);
1458                         nStart = nEnd;
1459                     }
1460                     SvxColumnDescription aColDesc(nStart, aTabCols.GetRight() - aTabCols.GetLeft(),
1461                                 0, 0,
1462                                     sal_True);
1463                     aColItem.Append(aColDesc);
1464                 }
1465                 rSet.Put(aColItem, nWhich);
1466             }
1467             else if ( bFrmSelection || nFrmType & ( FRMTYPE_COLUMN | FRMTYPE_COLSECT ) )
1468             {
1469                 // Aus Rahmen oder Seite ?
1470                 sal_uInt16 nNum = 0;
1471                 if(bFrmSelection)
1472                 {
1473                     const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt();
1474                     if(pFmt)
1475                         nNum = pFmt->GetCol().GetNumCols();
1476                 }
1477                 else
1478                     nNum = rSh.GetCurColNum();
1479 
1480                 if(
1481                     //eigentlich sollte FRMTYPE_COLSECT nicht enthalten sein, wenn der Rahmen selektiert ist!
1482                     !bFrmSelection &&
1483                     nFrmType & FRMTYPE_COLSECT )
1484                 {
1485                     const SwSection *pSect = rSh.GetAnySection(sal_False, pPt);
1486                     ASSERT( pSect, "Welcher Bereich?");
1487                     if( pSect )
1488                     {
1489                         SwSectionFmt *pFmt = pSect->GetFmt();
1490                         const SwFmtCol& rCol = pFmt->GetCol();
1491                         if(rSh.IsInRightToLeftText())
1492                             nNum = rCol.GetColumns().Count() - nNum;
1493                         else
1494                             --nNum;
1495                         SvxColumnItem aColItem(nNum);
1496                         SwRect aRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, pPt);
1497                         const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, pPt);
1498 
1499                         ::lcl_FillSvxColumn(rCol, sal_uInt16(bVerticalWriting ? aRect.Height() : aRect.Width()), aColItem, 0);
1500 
1501                         if(bVerticalWriting)
1502                         {
1503                             aRect.Pos() += Point(aTmpRect.Left(), aTmpRect.Top());
1504                             aRect.Pos().Y() -= rPageRect.Top();
1505                             aColItem.SetLeft ((sal_uInt16)(aRect.Top()));
1506                             aColItem.SetRight((sal_uInt16)(nPageHeight   - aRect.Bottom() ));
1507                         }
1508                         else
1509                         {
1510                             aRect.Pos() += aTmpRect.Pos();
1511 
1512                             // PAGES01
1513                             // make relative to page position:
1514                             aColItem.SetLeft ((sal_uInt16)( aRect.Left() - rPageRect.Left() ));
1515                             aColItem.SetRight((sal_uInt16)( rPageRect.Right() - aRect.Right()));
1516                         }
1517                         aColItem.SetOrtho(aColItem.CalcOrtho());
1518 
1519                         rSet.Put(aColItem, nWhich);
1520                     }
1521                 }
1522                 else if( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY )
1523                 {
1524                     // Spalten in Rahmen
1525                     if ( nNum  )
1526                     {
1527                         const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt() ;
1528 
1529                         const SwFmtCol& rCol = pFmt->GetCol();
1530                         if(rSh.IsInRightToLeftText())
1531                             nNum = rCol.GetColumns().Count() - nNum;
1532                         else
1533                             nNum--;
1534                         SvxColumnItem aColItem(nNum);
1535                         const SwRect &rSizeRect = rSh.GetAnyCurRect(RECT_FLY_PRT_EMBEDDED, pPt);
1536 
1537                         sal_Bool bUseVertical = bFrameHasVerticalColumns || (!bFrmSelection && bVerticalWriting);
1538                         const long lWidth = bUseVertical ? rSizeRect.Height() : rSizeRect.Width();
1539                         const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt);
1540                         long nDist2 = ((bUseVertical ? rRect.Height() : rRect.Width()) - lWidth) /2;
1541                         ::lcl_FillSvxColumn(rCol, sal_uInt16(lWidth), aColItem, nDist2);
1542 
1543                         SfxItemSet aFrameSet(GetPool(), RES_LR_SPACE, RES_LR_SPACE);
1544                         rSh.GetFlyFrmAttr( aFrameSet );
1545 
1546                         if(bUseVertical)
1547                         {
1548                             aColItem.SetLeft ((sal_uInt16)(rRect.Top()- rPageRect.Top()));
1549                             aColItem.SetRight((sal_uInt16)(nPageHeight + rPageRect.Top() - rRect.Bottom() ));
1550                         }
1551                         else
1552                         {
1553                             aColItem.SetLeft ((sal_uInt16)(rRect.Left() - rPageRect.Left()   ));
1554                             aColItem.SetRight((sal_uInt16)(rPageRect.Right() - rRect.Right() ));
1555                         }
1556 
1557                         aColItem.SetOrtho(aColItem.CalcOrtho());
1558 
1559                         rSet.Put(aColItem, nWhich);
1560                     }
1561                     else
1562                         rSet.DisableItem(nWhich);
1563                 }
1564                 else
1565                 {   // Spalten auf der Seite
1566                     const SwFrmFmt& rMaster = rDesc.GetMaster();
1567                     SwFmtCol aCol(rMaster.GetCol());
1568                     if(rFrameDir.GetValue() == FRMDIR_HORI_RIGHT_TOP)
1569                         nNum = aCol.GetColumns().Count() - nNum;
1570                     else
1571                         nNum--;
1572 
1573                     SvxColumnItem aColItem(nNum);
1574                     const SwRect aPrtRect = rSh.GetAnyCurRect(RECT_PAGE_PRT, pPt);
1575                     const SvxBoxItem& rBox = (const SvxBoxItem&)rMaster.GetFmtAttr(RES_BOX);
1576                     long nDist = rBox.GetDistance();
1577                     ::lcl_FillSvxColumn(aCol,
1578                         sal_uInt16(bVerticalWriting ? aPrtRect.Height() : aPrtRect.Width() ),
1579                         aColItem, nDist);
1580 
1581                     if(bBrowse)
1582                     {
1583                         aColItem.SetLeft((sal_uInt16)rPagePrtRect.Left());
1584                         aColItem.SetRight(sal_uInt16(nPageWidth - rPagePrtRect.Right()));
1585                     }
1586                     else
1587                     {
1588                         aColItem.SetLeft (aPageLRSpace.GetLeft());
1589                         aColItem.SetRight(aPageLRSpace.GetRight());
1590                     }
1591                     aColItem.SetOrtho(aColItem.CalcOrtho());
1592 
1593                     rSet.Put(aColItem, nWhich);
1594                 }
1595             }
1596             else
1597                 rSet.DisableItem(nWhich);
1598             break;
1599         }
1600         case SID_RULER_ROWS :
1601         case SID_RULER_ROWS_VERTICAL:
1602         {
1603             sal_Bool bFrameHasVerticalColumns(sal_False);
1604             {
1605                 sal_Bool bFrameRTL;
1606                 sal_Bool bFrameVertL2R;
1607                 bFrameHasVerticalColumns = rSh.IsFrmVertical(sal_False, bFrameRTL, bFrameVertL2R) &&
1608                                            bFrmSelection;
1609             }
1610 
1611             if( ( (SID_RULER_ROWS == nWhich) &&
1612                     ((!bVerticalWriting && !bFrmSelection) || (bFrmSelection && !bFrameHasVerticalColumns)) ) ||
1613                 ((SID_RULER_ROWS_VERTICAL == nWhich) &&
1614                     ((bVerticalWriting && !bFrmSelection) || bFrameHasVerticalColumns)))
1615                 rSet.DisableItem(nWhich);
1616             else if ( IsTabRowFromDoc() ||
1617                     ( rSh.GetTableFmt() && !bFrmSelection &&
1618                     !(nFrmType & FRMTYPE_COLSECT ) ) )
1619             {
1620                 SwTabCols aTabCols;
1621                 //no current value necessary
1622                 sal_uInt16    nNum = 0;
1623                 if ( 0 != ( bSetTabRowFromDoc = IsTabRowFromDoc() ) )
1624                 {
1625                     rSh.GetMouseTabRows( aTabCols, aTabColFromDocPos );
1626                 }
1627                 else
1628                 {
1629                     rSh.GetTabRows( aTabCols );
1630                 }
1631 
1632 //                ASSERT(nNum <= aTabCols.Count(), "TabCol not found");
1633                 const int nLft = aTabCols.GetLeftMin();
1634                 const int nRgt = (sal_uInt16)(bVerticalWriting ? nPageWidth : nPageHeight) -
1635                                   (aTabCols.GetLeftMin() +
1636                                   aTabCols.GetRight());
1637 
1638                 const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0);
1639                 const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0);
1640 
1641                 SvxColumnItem aColItem(nNum, nL, nR);
1642 
1643                 sal_uInt16 nStart = 0,
1644                        nEnd;
1645 
1646                 for ( sal_uInt16 i = 0; i < aTabCols.Count(); ++i )
1647                 {
1648                     const SwTabColsEntry& rEntry = aTabCols.GetEntry( i );
1649                     if(bVerticalWriting)
1650                     {
1651                         nEnd  = sal_uInt16(aTabCols.GetRight() - rEntry.nPos);
1652                         SvxColumnDescription aColDesc( nStart, nEnd,
1653                             aTabCols.GetRight() - rEntry.nMax, aTabCols.GetRight() - rEntry.nMin,
1654                                                     !aTabCols.IsHidden(i) );
1655                         aColItem.Append(aColDesc);
1656                     }
1657                     else
1658                     {
1659                         nEnd  = sal_uInt16(rEntry.nPos - aTabCols.GetLeft());
1660                         SvxColumnDescription aColDesc( nStart, nEnd,
1661                                 sal_uInt16(rEntry.nMin - aTabCols.GetLeft()), sal_uInt16(rEntry.nMax - aTabCols.GetLeft()),
1662                                                     !aTabCols.IsHidden(i) );
1663                         aColItem.Append(aColDesc);
1664                     }
1665                     nStart = nEnd;
1666                 }
1667                 if(bVerticalWriting)
1668                     nEnd = static_cast< sal_uInt16 >(aTabCols.GetRight());
1669                 else
1670                     nEnd = static_cast< sal_uInt16 >(aTabCols.GetLeft());
1671                 // put a position protection when the last row cannot be moved
1672                 // due to a page break inside of a row
1673                 if(!aTabCols.IsLastRowAllowedToChange())
1674                     bPutContentProtection = sal_True;
1675 
1676                 SvxColumnDescription aColDesc( nStart, nEnd,
1677                     aTabCols.GetRight(), aTabCols.GetRight(),
1678                                             sal_False );
1679                 aColItem.Append(aColDesc);
1680 
1681                 rSet.Put(aColItem, nWhich);
1682             }
1683             else
1684                 rSet.DisableItem(nWhich);
1685         }
1686         break;
1687         case SID_RULER_PAGE_POS:
1688         {
1689             // PAGES01
1690             SvxPagePosSizeItem aPagePosSize(
1691                     Point( rPageRect.Left(), rPageRect.Top()) , nPageWidth, nPageHeight);
1692 
1693             rSet.Put(aPagePosSize);
1694             break;
1695         }
1696         case SID_RULER_LR_MIN_MAX:
1697         {
1698             Rectangle aRectangle;
1699             if( ( nFrmType & FRMTYPE_COLSECT ) && !IsTabColFromDoc() &&
1700                 ( nFrmType & ( FRMTYPE_TABLE|FRMTYPE_COLUMN ) ) )
1701             {
1702                 if( nFrmType & FRMTYPE_TABLE )
1703                 {
1704                     const sal_uInt16 nNum = rSh.GetCurTabColNum();
1705                     SwTabCols aTabCols;
1706                     rSh.GetTabCols( aTabCols );
1707 
1708                     const int nLft = aTabCols.GetLeftMin() + aTabCols.GetLeft();
1709                     const int nRgt = (sal_uInt16)nPageWidth -(aTabCols.GetLeftMin() + aTabCols.GetRight());
1710 
1711                     const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0);
1712                     const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0);
1713 
1714                     aRectangle.Left() = nL;
1715                     if(nNum > 1)
1716                         aRectangle.Left() += aTabCols[nNum - 2];
1717                     if(nNum)
1718                         aRectangle.Left() += MINLAY;
1719                     if(aTabCols.Count() <= nNum + 1 )
1720                         aRectangle.Right() = nR;
1721                     else
1722                         aRectangle.Right() = nPageWidth - (nL + aTabCols[nNum + 1]);
1723 
1724                     if(nNum < aTabCols.Count())
1725                         aRectangle.Right() += MINLAY;
1726                 }
1727                 else
1728                 {
1729                     const SwFrmFmt* pFmt =  rSh.GetFlyFrmFmt();
1730                     const SwFmtCol* pCols = pFmt ? &pFmt->GetCol():
1731                                                    &rDesc.GetMaster().GetCol();
1732                     const SwColumns& rCols = pCols->GetColumns();
1733                     sal_uInt16 nNum = rSh.GetCurOutColNum();
1734                     sal_uInt16 nCount = Min(sal_uInt16(nNum + 1), rCols.Count());
1735                     const SwRect aRect( rSh.GetAnyCurRect( pFmt
1736                                                     ? RECT_FLY_PRT_EMBEDDED
1737                                                     : RECT_PAGE_PRT, pPt ));
1738                     const SwRect aAbsRect( rSh.GetAnyCurRect( pFmt
1739                                                     ? RECT_FLY_EMBEDDED
1740                                                     : RECT_PAGE, pPt ));
1741 
1742                     //die Breite im Rahmen bzw. innerhalbe der Seitenraender
1743                     const sal_uInt16 nTotalWidth = (sal_uInt16)aRect.Width();
1744                     //die gesamte Rahmenbreite - die Differenz ist der doppelte Abstand zum Rand
1745                     const sal_uInt16 nOuterWidth = (sal_uInt16)aAbsRect.Width();
1746                     int nWidth = 0,
1747                         nStart = 0,
1748                         nEnd = 0;
1749                     aRectangle.Left() = 0;
1750                     for ( sal_uInt16 i = 0; i < nCount; ++i )
1751                     {
1752                         SwColumn* pCol = rCols[i];
1753                         nStart = pCol->GetLeft() + nWidth;
1754                         if(i == nNum - 2)
1755                             aRectangle.Left() = nStart;
1756                         nWidth += pCols->CalcColWidth( i, nTotalWidth );
1757                         nEnd = nWidth - pCol->GetRight();
1758                     }
1759                     aRectangle.Right() = rPageRect.Right() - nEnd;
1760                     aRectangle.Left() -= rPageRect.Left();
1761 
1762                     if(nNum > 1)
1763                     {
1764                         aRectangle.Left() += MINLAY;
1765                         aRectangle.Left() += aRect.Left();
1766                     }
1767                     if(pFmt) //Bereich in Rahmen - hier darf man bis zum Rand
1768                         aRectangle.Left()  = aRectangle.Right() = 0;
1769                     else
1770                     {
1771                         // das Rechteck an die richtige absolute Position verschieben
1772                         aRectangle.Left() += aAbsRect.Left();
1773                         aRectangle.Right() -= aAbsRect.Left();
1774                         // Abstand zur Umrandung mit einbeziehen
1775                         aRectangle.Right() -= (nOuterWidth - nTotalWidth) / 2;
1776                     }
1777 
1778                     if(nNum < rCols.Count())
1779                     {
1780                         aRectangle.Right() += MINLAY;
1781                     }
1782                     else
1783                         // rechts ist jetzt nur noch der Seitenrand
1784                         aRectangle.Right() = 0;
1785 
1786 
1787                 }
1788             }
1789             else if ( ((nFrmType & FRMTYPE_TABLE) || IsTabColFromDoc()) &&
1790                  !bFrmSelection )
1791             {
1792                 sal_Bool bColumn;
1793                 if ( IsTabColFromDoc() )
1794                     bColumn = rSh.GetCurMouseColNum( aTabColFromDocPos ) != 0;
1795                 else
1796                     bColumn = (nFrmType & (FRMTYPE_COLUMN|FRMTYPE_FLY_ANY|
1797                                             FRMTYPE_COLSECTOUTTAB)) ?
1798                                             sal_True : sal_False;
1799                 if ( !bColumn )
1800                 {
1801                     if( nFrmType & FRMTYPE_FLY_ANY && IsTabColFromDoc() )
1802                     {
1803                         SwRect aRect( rSh.GetAnyCurRect(
1804                                             RECT_FLY_PRT_EMBEDDED, pPt ) );
1805                         aRect.Pos() += rSh.GetAnyCurRect( RECT_FLY_EMBEDDED,
1806                                                                 pPt ).Pos();
1807 
1808                         aRectangle.Left()  = aRect.Left() - rPageRect.Left();
1809                         aRectangle.Right() = rPageRect.Right() - aRect.Right();
1810                     }
1811                     else if( bBrowse )
1812                     {
1813                         aRectangle.Left()  = rPagePrtRect.Left();
1814                         aRectangle.Right() = nPageWidth - rPagePrtRect.Right();
1815                     }
1816                     else
1817                     {
1818                         aRectangle.Left()  = aPageLRSpace.GetLeft();
1819                         aRectangle.Right() = aPageLRSpace.GetRight();
1820                     }
1821                 }
1822                 else
1823                 {   //hier nur fuer Tabelle in mehrspaltigen Seiten und Rahmen
1824                     sal_Bool bSectOutTbl = (nFrmType & FRMTYPE_TABLE) ? sal_True : sal_False;
1825                     sal_Bool bFrame = (nFrmType & FRMTYPE_FLY_ANY) ? sal_True : sal_False;
1826                     sal_Bool bColSct =  (nFrmType & ( bSectOutTbl
1827                                                     ? FRMTYPE_COLSECTOUTTAB
1828                                                     : FRMTYPE_COLSECT )
1829                                                 ) ? sal_True : sal_False;
1830                     //Damit man auch mit der Mouse ziehen kann,
1831                     //ohne in der Tabelle zu stehen
1832                     CurRectType eRecType = RECT_PAGE_PRT;
1833                     sal_uInt16 nNum = IsTabColFromDoc() ?
1834                                 rSh.GetCurMouseColNum( aTabColFromDocPos ):
1835                                 rSh.GetCurOutColNum();
1836                     const SwFrmFmt* pFmt = NULL;
1837                     if( bColSct )
1838                     {
1839                         eRecType = bSectOutTbl ? RECT_OUTTABSECTION
1840                                                : RECT_SECTION;
1841                         const SwSection *pSect = rSh.GetAnySection( bSectOutTbl, pPt );
1842                         ASSERT( pSect, "Welcher Bereich?");
1843                         pFmt = pSect->GetFmt();
1844                     }
1845                     else if( bFrame )
1846                     {
1847                         pFmt = rSh.GetFlyFrmFmt();
1848                         eRecType = RECT_FLY_PRT_EMBEDDED;
1849                     }
1850 
1851                     const SwFmtCol* pCols = pFmt ? &pFmt->GetCol():
1852                                                    &rDesc.GetMaster().GetCol();
1853                     const SwColumns& rCols = pCols->GetColumns();
1854                     const sal_uInt16 nBorder = pFmt ? pFmt->GetBox().GetDistance() :
1855                                                   rDesc.GetMaster().GetBox().GetDistance();
1856 
1857                     /* RECT_FLY_PRT_EMBEDDED returns the relative position to
1858                         RECT_FLY_EMBEDDED
1859                         the absolute position must be added here
1860                     */
1861                     SwRect aRect( rSh.GetAnyCurRect( eRecType, pPt ) );
1862                     if(RECT_FLY_PRT_EMBEDDED == eRecType)
1863                         aRect.Pos() += rSh.GetAnyCurRect( RECT_FLY_EMBEDDED,
1864                                                                 pPt ).Pos();
1865 
1866                     const sal_uInt16 nTotalWidth = (sal_uInt16)aRect.Width();
1867                     //nStart und nEnd initialisieren fuer nNum == 0
1868                     int nWidth = 0,
1869                         nStart = 0,
1870                         nEnd = nTotalWidth;
1871 
1872                     if( nNum > rCols.Count() )
1873                     {
1874                         ASSERT( !this, "es wird auf dem falschen FmtCol gearbeitet!" );
1875                         nNum = rCols.Count();
1876                     }
1877 
1878                     for( sal_uInt16 i = 0; i < nNum; ++i )
1879                     {
1880                         SwColumn* pCol = rCols[i];
1881                         nStart = pCol->GetLeft() + nWidth;
1882                         nWidth += pCols->CalcColWidth( i, nTotalWidth );
1883                         nEnd = nWidth - pCol->GetRight();
1884                     }
1885                     if( bFrame | bColSct )
1886                     {
1887                         aRectangle.Left()  = aRect.Left() - rPageRect.Left() + nStart;
1888                         aRectangle.Right() = nPageWidth - aRectangle.Left() - nEnd + nStart;
1889                     }
1890                     else if(!bBrowse)
1891                     {
1892                         aRectangle.Left()  = aPageLRSpace.GetLeft() + nStart;
1893                         aRectangle.Right() = nPageWidth - nEnd - aPageLRSpace.GetLeft();
1894                     }
1895                     else
1896                     {
1897                         long nLeft = rPagePrtRect.Left();
1898                         aRectangle.Left()  = nStart + nLeft;
1899                         aRectangle.Right() = nPageWidth - nEnd - nLeft;
1900                     }
1901                     if(!bFrame)
1902                     {
1903                         aRectangle.Left() += nBorder;
1904                         aRectangle.Right() -= nBorder;
1905                     }
1906                 }
1907             }
1908             else if ( nFrmType & ( FRMTYPE_HEADER  | FRMTYPE_FOOTER ))
1909             {
1910                 aRectangle.Left()  = aPageLRSpace.GetLeft();
1911                 aRectangle.Right() = aPageLRSpace.GetRight();
1912             }
1913             else
1914                 aRectangle.Left()  = aRectangle.Right() = 0;
1915 
1916             SfxRectangleItem aLR( SID_RULER_LR_MIN_MAX , aRectangle);
1917             rSet.Put(aLR);
1918         }
1919         break;
1920         case SID_RULER_PROTECT:
1921         {
1922             if(bFrmSelection)
1923             {
1924                 sal_uInt8 nProtect = pWrtShell->IsSelObjProtected( FLYPROTECT_SIZE|FLYPROTECT_POS|FLYPROTECT_CONTENT );
1925 
1926                 SvxProtectItem aProt(SID_RULER_PROTECT);
1927                 aProt.SetCntntProtect((nProtect & FLYPROTECT_CONTENT)   != 0);
1928                 aProt.SetSizeProtect ((nProtect & FLYPROTECT_SIZE)      != 0);
1929                 aProt.SetPosProtect  ((nProtect & FLYPROTECT_POS)       != 0);
1930                 rSet.Put(aProt);
1931             }
1932             else
1933             {
1934                 SvxProtectItem aProtect(SID_RULER_PROTECT);
1935                 if(bBrowse && !(nFrmType & (FRMTYPE_DRAWOBJ|FRMTYPE_COLUMN)) && !rSh.GetTableFmt())
1936                 {
1937                     aProtect.SetSizeProtect(sal_True);
1938                     aProtect.SetPosProtect(sal_True);
1939                 }
1940                 rSet.Put(aProtect);
1941             }
1942         }
1943         break;
1944         }
1945         nWhich = aIter.NextWhich();
1946     }
1947     if(bPutContentProtection)
1948     {
1949         SvxProtectItem aProtect(SID_RULER_PROTECT);
1950         aProtect.SetCntntProtect(sal_True);
1951         rSet.Put(aProtect);
1952     }
1953 }
1954 
1955 
1956