xref: /trunk/main/wizards/source/euro/Hard.xba (revision 10d685eaf05487ae305fb27895e68dff92c96120)

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE script:module PUBLIC "-//OpenOffice.org//DTD OfficeDocument 1.0//EN" "module.dtd">
<!--***********************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 ***********************************************************-->
<script:module xmlns:script="http://openoffice.org/2000/script" script:name="Hard" script:language="StarBasic">REM ***** BASIC *****
Option Explicit


Sub CreateRangeList()
Dim MaxIndex as Integer
    MaxIndex = -1
    EnableStep1DialogControls(False, False, False)
    EmptySelection()
    DialogModel.lblSelection.Label = sCURRRANGES
    EmptyListbox(DialogModel.lstSelection)
    oDocument.CurrentController.Select(oSelRanges)
    If (DialogModel.optSheetRanges.State = 1) AND (DialogModel.chkComplete.State &lt;&gt; 1) Then
        &apos; Conversion on a sheet?
        SetStatusLineText(sStsRELRANGES)
        osheet = oDocument.CurrentController.GetActiveSheet
        oRanges = osheet.CellFormatRanges.createEnumeration()
        MaxIndex = AddSheetRanges(oRanges, MaxIndex, oSheet, False)
        If MaxIndex &gt; -1 Then
            ReDim Preserve RangeList(MaxIndex)
        End If
    Else
        CreateRangeEnumeration(False)
        bRangeListDefined = True
    End If
    EnableStep1DialogControls(True, True, True)
    SetStatusLineText(&quot;&quot;)
End Sub


Sub CreateRangeEnumeration(bAutopilot as Boolean)
Dim i as Integer
Dim MaxIndex as integer
Dim sStatustext as String
    MaxIndex = -1
    If Not bRangeListDefined Then
        &apos; Cellranges are not yet defined
        oSheets = oDocument.Sheets
        For i = 0 To oSheets.Count-1
            oSheet = oSheets.GetbyIndex(i)
            If bAutopilot Then
                IncreaseStatusValue(SBRELGET/osheets.Count)
            Else
                sStatustext = ReplaceString(sStsRELSHEETRANGES,Str(i+1),&quot;%1Number%1&quot;)
                sStatustext = ReplaceString(sStatusText,oSheets.Count,&quot;%2TotPageCount%2&quot;)
                SetStatusLineText(sStatusText)
            End If
            oRanges = osheet.CellFormatRanges.createEnumeration
            MaxIndex = AddSheetRanges(oRanges, MaxIndex, oSheet, bAutopilot)
        Next i
    Else
        If Not bAutoPilot Then
            SetStatusLineText(sStsRELRANGES)
            &apos; cellranges already defined
            For i = 0 To Ubound(RangeList())
                If RangeList(i) &lt;&gt; &quot;&quot; Then
                    AddSingleItemToListBox(DialogModel.lstSelection, RangeList(i))
                End If
            Next
        End If
    End If
    If MaxIndex &gt; -1 Then
        ReDim Preserve RangeList(MaxIndex)
    Else
        ReDim RangeList()
    End If
    Rangeindex = MaxIndex
End Sub


Function AddSheetRanges(oRanges as Object, r as Integer, oSheet as Object, bAutopilot)
Dim RangeName as String
Dim AddtoList as Boolean
Dim iCurStep as Integer
Dim MaxIndex as Integer
    iCurStep = DialogModel.Step
    While oRanges.hasMoreElements
        oRange = oRanges.NextElement
        AddToList = CheckFormatType(oRange)
        If AddToList Then
            RangeName = RetrieveRangeNamefromAddress(oRange)
            TotCellCount = TotCellCount + CountRangeCells(oRange)
            If Not bAutoPilot Then
                AddSingleItemToListbox(DialogModel.lstSelection, RangeName)
            End If
            &apos; The Ranges are only passed to an Array when the whole Document is the basis
            &apos; Redimension the RangeList Array if necessary
            MaxIndex = Ubound(RangeList())
            r = r + 1
            If r &gt; MaxIndex Then
                MaxIndex = MaxIndex + SBRANGEUBOUND
                ReDim Preserve RangeList(MaxIndex)
            End If
            RangeList(r) = RangeName
        End If
    Wend
    AddSheetRanges = r
End Function


&apos; adds a section to the collection
Sub SelectRange()
Dim i as Integer
Dim RangeName as String
Dim SelItem as String
Dim CurRange as String
Dim SheetRangeName as String
Dim DescriptionList() as String
Dim MaxRangeIndex as Integer
Dim StatusValue as Integer
    StatusValue = 0
    MaxRangeIndex = Ubound(SelRangeList())
    CurSheetName = oSheet.Name
    For i = 0 To MaxRangeIndex
        SelItem = SelRangeList(i)
        &apos; Is the Range already included in the collection?
        oRange = RetrieveRangeoutOfRangename(SelItem)
        TotCellCount = TotCellCount + CountRangeCells(oRange)
        DescriptionList() = ArrayOutofString(SelItem,&quot;.&quot;,1)
        SheetRangeName = DeleteStr(DescriptionList(0),&quot;&apos;&quot;)
        If SheetRangeName = CurSheetName Then
            oSelRanges.InsertbyName(&quot;&quot;,oRange)
        End If
        IncreaseStatusValue(SBRELGET/MaxRangeIndex)
    Next i
End Sub


Sub ConvertThehardWay(ListboxList(), SwitchFormat as Boolean, bRemove as Boolean)
Dim i as Integer
Dim AddCells as Long
Dim OldStatusValue as Single
Dim RangeName as String
Dim LastIndex as Integer
Dim oSelListbox as Object

    oSelListbox = DialogConvert.GetControl(&quot;lstSelection&quot;)
    Lastindex = Ubound(ListboxList())
    If TotCellCount &gt; 0 Then
        OldStatusValue = StatusValue
        &apos; hard format
        For i = 0 To LastIndex
            RangeName = ListboxList(i)
            oRange = RetrieveRangeoutofRangeName(RangeName)
            ConvertCellCurrencies(oRange)
            If bRemove Then
                If oSelRanges.HasbyName(RangeName) Then
                    oSelRanges.RemovebyName(RangeName)
                    oDocument.CurrentController.Select(oSelRanges)
                End If
            End If
            If SwitchFormat Then
                If oRange.getPropertyState(&quot;NumberFormat&quot;) &lt;&gt; 1 Then
                    &apos; Range is hard formatted
                    SwitchNumberFormat(oRange, oFormats, sEuroSign)
                End If
            Else
                SwitchNumberFormat(oRange, oFormats, sEuroSign)
            End If
            AddCells = CountRangeCells(oRange)
            CurCellCount = AddCells
            IncreaseStatusValue((CurCellCount/TotCellCount)*(100-OldStatusValue))
            If bRemove Then
                RemoveListBoxItemByName(oSelListbox.Model,Rangename)
            End If
        Next
    End If
End Sub


Sub ConvertCellCurrencies(oRange as Object)
Dim oValues as Object
Dim oCells as Object
Dim oCell as Object
    oValues = oRange.queryContentCells(com.sun.star.sheet.CellFlags.VALUE)
    If (oValues.Count &gt; 0) Then
        oCells = oValues.Cells.createEnumeration
        While oCells.hasMoreElements
            oCell = oCells.nextElement
            ModifyObjectValuewithCurrFactor(oCell)
        Wend
    End If
End Sub


Sub ModifyObjectValuewithCurrFactor(oDocObject as Object)
Dim oDocObjectValue as double
    oDocObjectValue = oDocObject.Value
    oDocObject.Value = Round(oDocObjectValue/CurrFactor, 2)
End Sub


Function CheckIfRangeisCurrency(FormatObject as Object)
Dim oFormatofObject() as Object
    &apos; Retrieve the Format of the Object
    On Local Error GoTo NOKEY
    oFormatofObject() = oFormats.getByKey(FormatObject.NumberFormat)
    On Local Error GoTo 0
    CheckIfRangeIsCurrency = INT(oFormatofObject.Type) AND com.sun.star.util.NumberFormat.CURRENCY
    Exit Function
NOKEY:
    CheckIfRangeisCurrency = False
    Resume CLERROR
    CLERROR:
End Function


Function CountColumnsForRow(IndexArray() as String, Row as Integer)
Dim i as Integer
Dim NoNulls as Boolean
    For i = 1 To Ubound(IndexArray,2)
        If IndexArray(Row,i)= &quot;&quot; Then
            NoNulls = False
            Exit For
        End If
    Next
    CountColumnsForRow = i
End Function


Function CountRangeCells(oRange as Object) As Long
Dim oRangeAddress as Object
Dim LocCellCount as Long
    oRangeAddress = oRange.RangeAddress
    LocCellCount = (oRangeAddress.EndColumn - oRangeAddress.StartColumn + 1) * (oRangeAddress.EndRow - oRangeAddress.StartRow + 1)
    CountRangeCells = LocCellCount
End Function</script:module>