1dnl * ************************************************************* 2dnl * 3dnl * Licensed to the Apache Software Foundation (ASF) under one 4dnl * or more contributor license agreements. See the NOTICE file 5dnl * distributed with this work for additional information 6dnl * regarding copyright ownership. The ASF licenses this file 7dnl * to you under the Apache License, Version 2.0 (the 8dnl * "License"); you may not use this file except in compliance 9dnl * with the License. You may obtain a copy of the License at 10dnl * 11dnl * http://www.apache.org/licenses/LICENSE-2.0 12dnl * 13dnl * Unless required by applicable law or agreed to in writing, 14dnl * software distributed under the License is distributed on an 15dnl * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16dnl * KIND, either express or implied. See the License for the 17dnl * specific language governing permissions and limitations 18dnl * under the License. 19dnl * 20dnl * ************************************************************* 21AC_REVISION( $Revision$ ) 22dnl macOS needs autoconf 2.72 (2.71 mis-detects the toolchain there); 23dnl other platforms remain on the older 2.71 floor. 24m4_define([AOO_REQUIRED_AUTOCONF], 25 [m4_if(m4_esyscmd_s([uname]), [Darwin], [2.72], [2.71])]) 26AC_PREREQ(AOO_REQUIRED_AUTOCONF) 27AC_INIT 28echo "$@" >config.parms 29AC_ARG_WITH(dmake-path, 30[ --with-dmake-path=<PATH TO EXECUTABLE> Specify the location of dmake ], 31[ DMAKE_PATH="$withval" 32]) 33AC_ARG_WITH(dmake-url, 34[ --with-dmake-url=<URL> Specify the location of downloadable dmake source code. For example: 35 https://github.com/jimjag/dmake/archive/v4.13.2/dmake-4.13.2.tar.gz 36 Note that dmake is under GPL license.], 37[ DMAKE_URL="$withval" 38]) 39AC_ARG_WITH(packager-list, 40[ --with-packager-list=<PATH TO PACK LIST> Specify a file to drive the packaging process. 41 The file must follow the format explained in 42 instsetoo_native/util/pack.lst 43],,) 44AC_ARG_WITH(gnu-patch, 45[ --with-gnu-patch Specify location of GNU patch on Solaris or FreeBSD 46],,) 47AC_ARG_WITH(gnu-cp, 48[ --with-gnu-cp Specify location of GNU cp on Solaris 49],,) 50AC_ARG_WITH(gperf, 51[ --with-gperf Specify location of gperf on Solaris or FreeBSD 52],,) 53AC_ARG_ENABLE(graphite, 54[ --enable-graphite Enables the compilation of Graphite smart font rendering 55],,) 56AC_ARG_WITH(system-graphite, 57[ --with-system-graphite use graphite library already installed on system 58],,) 59AC_ARG_WITH(system-apache-commons, 60[ --with-system-apache-commons use apache-commons jar files already installed on system 61],,) 62AC_ARG_ENABLE(online-update, 63[ --disable-online-update Disables the Online Update feature. 64],,enable_online_update=yes) 65AC_ARG_ENABLE(unit-tests, 66[ --disable-unit-tests Disables default unit tests (eg. unit tests using Google test, ...). 67],,enable_unit_tests=yes) 68AC_ARG_ENABLE(ldap, 69[ --disable-ldap Disables the use of LDAP backend via OpenLDAP 70],,) 71AC_ARG_ENABLE(fetch-external, 72[ --disable-fetch-external Disables fetching external tarballs from web sources. 73],,) 74AC_ARG_WITH(external-tar, 75[ --with-external-tar=<TARFILE PATH> Specify path to tarfiles manually ], 76[ TARFILE_LOCATION="$withval" 77]) 78AC_ARG_WITH(openldap, 79[ --with-openldap Enables the use of the OpenLDAP 80],,) 81AC_ARG_ENABLE(lockdown, 82[ --enable-lockdown Enables the gconf integration work in AOO 83],,) 84AC_ARG_ENABLE(vba, 85[ --disable-vba disables the vba compatibility feature 86],,) 87AC_ARG_WITH(vba-package-format, 88[ --with-vba-package-format specify package format for vba compatibility api. 89 Specifying "builtin" means the api component and 90 associated type library are part of the installation set. 91 Specifying "extn" creates an uno extension that is 92 part of the installation set ( located in the program 93 directory ) that MUST be optionly registered using 94 either the unopkg executeable or the extension manager 95 gui. 96 97 Note: "builtin" is the default, "extn" can cause 98 problems. 99 Usage: --with-vba-package-format="builtin" or 100 --with-vba-package-format="extn" 101],,) 102AC_ARG_ENABLE(pch, 103[ --enable-pch EXPERIMENTAL: Enables precompiled header support for C++. 104],,) 105AC_ARG_WITH(fonts, 106[ --without-fonts AOO includes some third-party fonts to provide a reliable 107 basis for help content, templates, samples, etc. 108 When these fonts are already known to be available on the 109 system then you should use this option. 110],,) 111AC_ARG_WITH(ppds, 112[ --without-ppds Removes Postscript Printer definition files from 113 Apache OpenOffice installation set, for people building 114 for specific distributions where PPDs are known to be 115 already available (every recent distro with CUPS 116 backend) 117],,) 118AC_ARG_WITH(afms, 119[ --without-afms Removes bitmap font files from Apache Openoffice 120 installation set, for people building for specific 121 distributions where AFM files or TrueType Fonts 122 are known to be available. 123],,) 124AC_ARG_ENABLE(epm, 125[ --disable-epm AOO includes self-packaging code, that requires EPM. 126],,enable_epm="yes") 127AC_ARG_WITH(epm, 128[ --with-epm Decides which EPM to use. Default is to use 129 the one installed on the system if one is there. When 130 either this is not there or you say =internal 131 EPM will be built. 132],,) 133AC_ARG_WITH(epm-url, 134[ --with-epm-url=<URL> Specify the location of downloadable epm source code. For example: 135 https://github.com/jimjag/epm/archive/v5.1.0/epm-5.1.0.tar.gz 136 Version 5.0.0 or later is required. 137],[ EPM_URL="$withval" 138]) 139AC_ARG_WITH(package-format, 140[ --with-package-format specify package format(s) for AOO installsets. 141 Default is "normal" one of the OS/Distribution. 142 143 Usage: --with-package-format="foo bar" 144],,) 145AC_ARG_ENABLE(odk, 146[ --disable-odk AOO includes an ODK, office development kit 147 which some packagers may want to build without 148],,enable_odk="yes") 149AC_ARG_ENABLE(mathmldtd, 150[ --disable-mathmldtd disable mathmldtd 151 (useful for distributions that want to avoid packaging 152 it) 153],,enable_mathmldtd="yes") 154AC_ARG_ENABLE(evolution2, 155[ --enable-evolution2 Allows the built-in evolution 2 addressbook 156 connectivity build to be enabled. 157],,) 158AC_ARG_WITH(system-stdlibs, 159[ --with-system-stdlibs use libstdc++/libgcc_s already on system 160],,) 161AC_ARG_ENABLE(cups, 162[ --disable-cups disable CUPS support (for printing on UNIX) 163],,enable_cups=yes) 164AC_ARG_ENABLE(fontconfig, 165[ --disable-fontconfig disable support for the fontconfig library 166],,enable_fontconfig=yes) 167AC_ARG_ENABLE(directx, 168[ --disable-directx Remove DirectX implementation for the new XCanvas 169 interface. The DirectX support requires more stuff 170 installed on Windows to compile. 171 (DirectX SDK, GDI+ libs) 172],,enable_directx=yes) 173AC_ARG_ENABLE(activex, 174[ --disable-activex Disable the use of ActiveX for Windows build. 175 This switch is mandatory when using VC++ 2005/2008 Express. 176 Alternatively you can use the Windows Driver Kit (WDK) and 177 configure with the following switches: 178 --with-atl-include-dir=$WDK_HOME\inc\atl71 179 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 180 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 181 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 182],,) 183 184AC_ARG_ENABLE(atl, 185[ --disable-atl Disable the use of ATL for Windows build. 186 This switch is mandatory when using VC++ 2005/2008 Express. 187 Alternatively you can use the Windows Driver Kit (WDK) and 188 configure with the following switches: 189 --with-atl-include-dir=$WDK_HOME\inc\atl71 190 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 191 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 192 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 193],,) 194 195AC_ARG_WITH(atl-include-dir, 196[ --with-atl-include-dir Path to ATL include directory for Windows build. 197 This switch is mandatory when using VC++ 2008 Express 198 and configuring with ATL/ActiveX enabled. 199 You can use the Windows Driver Kit (WDK) and 200 configure with the following switch: 201 --with-atl-include-dir=$WDK_HOME\inc\atl71 202],,) 203 204AC_ARG_WITH(atl-lib-dir, 205[ --with-atl-lib-dir Path to ATL libraries directory for Windows build. 206 This switch is mandatory when using VC++ 2008 Express 207 and configuring with ATL/ActiveX enabled. 208 You can use the Windows Driver Kit (WDK) and 209 configure with the following switch: 210 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 211],,) 212 213AC_ARG_WITH(mfc-include-dir, 214[ --with-mfc-include-dir Path to MFC include directory for Windows build. 215 This switch is mandatory when using VC++ 2008 Express 216 and configuring with ATL/ActiveX enabled. 217 You can use the Windows Driver Kit (WDK) and 218 configure with the following switch: 219 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 220],,) 221 222AC_ARG_WITH(mfc-lib-dir, 223[ --with-mfc-lib-dir Path to MFC libraries directory for Windows build. 224 This switch is mandatory when using VC++ 2008 Express 225 and configuring with ATL/ActiveX enabled. 226 You can use the Windows Driver Kit (WDK) and 227 configure with the following switch: 228 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 229],,) 230 231 232AC_ARG_ENABLE(symbols, 233[ --enable-symbols Include debugging symbols in output. 234 WARNING - a complete build needs 8 Gb of space and 235 takes much longer. (enables -g compiler flag) 236 237 --enable-symbols=SMALL sets the gcc -g1 setting 238 which is smaller. 239 240 Enabling symbols disables the stripping of the solver 241 (--disable-strip-solver). 242],,) 243AC_ARG_ENABLE(sanitizer, 244[ --enable-sanitizer Enables -fsanitize=address compiler flag. 245 Works with GCC and Clang. 246 247 It is suggested to add --enable-symbols so that the 248 address sanitizer can give more detailed information. 249],,) 250AC_ARG_ENABLE(strip-solver, 251[ --disable-strip-solver Disable the stripping of the solver. 252 By default the solver is stripped unless a build with 253 debugging symbols (--enable-symbols) is requested. 254 255 This switch allows to override this setting. 256],,) 257AC_ARG_ENABLE(werror, 258[ --enable-werror Turn warnings to errors. (Has no effect in modules 259 where the treating of warnings as errors is disabled 260 explicitly) 261],,) 262AC_ARG_ENABLE(debug, 263[ --enable-debug Include debugging symbols from --enable-symbols 264 plus extra debugging code. Extra large build! 265 (enables -g compiler flag and dmake debug=true) 266],,) 267AC_ARG_ENABLE(dbgutil, 268[ --enable-dbgutil Include additional debugging utilities, such as 269 assertions, object counting, etc. Larger build. 270 Independent from --enable-debug 271],,) 272AC_ARG_ENABLE(crashdump, 273[ --enable-crashdump Enable the crashdump feature code. 274],,) 275AC_ARG_ENABLE(cl-standard, 276[ --enable-cl-standard For Microsoft C/C++ compiler users, use non-optimizing 277 standard compiler. ( This just disables optimization 278 options and therefore removes a lot of warnings when 279 using the cheaper standard compiler. ) 280],,) 281AC_ARG_ENABLE(win64, 282[ --enable-win64 Enable building 64 bit OpenOffice on 64 bit Windows, (as 283 opposed to 32 bit OpenOffice that is usually built there). 284 This is a temporary option during the transition, 285 as 64 bit OpenOffice doesn't fully build on Windows yet. 286],,enable_win64=no) 287AC_ARG_ENABLE(win-x64-shellext, 288[ --enable-win-x64-shellext Enable the build/usage of Windows 64bit shell extensions. 289 These extensions are used for the system integration on 290 Windows 64bit systems. For example supporting the search 291 in ODF files with the standard Windows search feature. 292],,) 293AC_ARG_ENABLE(gtk, 294[ --disable-gtk Determines whether to use Gtk+ vclplug on platforms 295 where Gtk+ is available. 296],,enable_gtk=yes) 297AC_ARG_ENABLE(gstreamer, 298[ --enable-gstreamer Determines whether to use the GStreamer media 299 backend on platforms where GStreamer is available. 300],,enable_gstreamer=no) 301AC_ARG_ENABLE(systray, 302[ --disable-systray Determines whether to build the systray quickstarter. 303],,enable_systray=yes) 304AC_ARG_ENABLE(cairo, 305[ --enable-cairo Determines whether to use Cairo library on 306 platforms where Cairo is available. 307],,enable_cairo=no) 308AC_ARG_WITH(system-cairo, 309[ --with-system-cairo Use Cairo libraries already on system 310],,) 311AC_ARG_ENABLE(cairo-canvas, 312[ --disable-cairo-canvas Determines whether to build the Cairo canvas on 313 platforms where Cairo is available. 314],,enable_cairo_canvas=yes) 315AC_ARG_ENABLE(opengl, 316[ --enable-opengl Determines whether to build the OpenGL 3D slide 317 transitions component 318],,enable_opengl=no) 319AC_ARG_ENABLE(dbus, 320[ --enable-dbus Determines whether to enable presentation mode 321 screensaver control under GNOME via DBUS 322],,enable_dbus=no) 323AC_ARG_ENABLE(gconf, 324[ --disable-gconf Determines whether to use the GConf support 325],,enable_gconf=yes) 326AC_ARG_ENABLE(gnome-vfs, 327[ --disable-gnome-vfs Determines whether to use the Gnome Virtual Filing 328 System on platforms where that VFS is available 329],,enable_gnome_vfs=no) 330AC_ARG_ENABLE(gio, 331[ --enable-gio Determines whether to use the GIO support 332],,enable_gio=yes) 333AC_ARG_ENABLE(static-gtk, 334[ --enable-static-gtk Modules that are linked against gtk libraries use 335 the static libraries instead of the dynamic ones. 336 (enables -Bstatic linker flag for gtk libraries) 337],,) 338AC_ARG_ENABLE(layout, 339[ --enable-layout Enable the compilation and use of layout dialogs 340],,) 341AC_ARG_ENABLE(nss-module, 342[ --disable-nss-module Whether to use the NSS module that is used for xml-security 343],,enable_nss_module=yes) 344AC_ARG_ENABLE(kde, 345[ --enable-kde Determines whether to use Qt/KDE vclplug on platforms 346 where Qt and KDE are available. 347],,) 348AC_ARG_ENABLE(kde4, 349[ --enable-kde4 Determines whether to use Qt4/KDE4 vclplug on platforms 350 where Qt4 and KDE4 are available. May be used with --enable-kde 351 if you want to support both KDE3 and KDE4. 352],,) 353AC_ARG_ENABLE(rpath, 354[ --disable-rpath Disable the use of relative paths in shared libraries 355],,) 356AC_ARG_ENABLE(pam, 357[ --disable-pam Disable pam support. 358],,) 359AC_ARG_ENABLE(pam-link, 360[ --enable-pam-link link with libpam instead of dynamically open it 361],,) 362AC_ARG_ENABLE(crypt-link, 363[ --disable-crypt-link disable linking with libcrypt instead of dynamically 364 open it (needed for ancient GNU/Linux distributions 365 without crypt()/libcrypt) 366],,enable_crypt_link=yes) 367AC_ARG_ENABLE(xrender-link, 368[ --enable-xrender-link link with libXrender instead of dynamically open it 369],,) 370AC_ARG_ENABLE(randr, 371[ --disable-randr disable RandR support in the vcl project 372],,enable_randr=yes) 373AC_ARG_ENABLE(randr-link, 374[ --disable-randr-link disable linking with libXrandr, instead dynamically 375 open it at runtime 376],,enable_randr_link=yes) 377AC_ARG_WITH(bundled-extension-blobs, 378[ --with-bundled-extension-blobs Whitespace separated list of files in the tarball directory 379 that are to be bundled as-is for installation as extensions 380 at the first program start. Make sure to only bundle extensions 381 which can be installed without requiring a license dialog 382 and comply with their distribution requirements by updating the 383 files LICENSE_aggregated and NOTICE_aggregated accordingly 384],,) 385#AC_ARG_WITH(bundled-prereg-extensions, 386#[ --with-bundled-prereg-extensions Whitespace separated list of files in the tarball directory that 387# are to be bundled as pre-registered extensions. Make sure to only bundle 388# extensions which can be installed without requiring a license dialog 389#],,) 390AC_ARG_ENABLE(bundled-dictionaries, 391[ --enable-bundled-dictionaries Download dictionaries (spelling, hyphenation, thesaurus) 392 according to main/extensions.lst and bundle them. Make sure to 393 comply with their distribution requirements and update the 394 files LICENSE_aggregated and NOTICE_aggregated accordingly 395],,enable_bundled_dictionaries=no) 396 397# Remove the following switches when not in release mode. 398AC_ARG_WITH(system-dicts, 399[ --with-system-dicts Use dictionaries from system paths- Specify 400 them via --with-{dict,hyph,thes}-path=/path 401 if you want to override the default ones 402],,) 403AC_ARG_WITH(external-dict-dir, 404[ --with-external-dict-dir Specify external dictionary dir 405],,) 406AC_ARG_WITH(external-hyph-dir, 407[ --with-external-hyph-dir Specify external hyphenation pattern dir 408],,) 409AC_ARG_WITH(external-thes-dir, 410[ --with-external-thes-dir Specify external thesaurus dir 411],,) 412# End of remove. 413 414 415AC_ARG_WITH(system-libs, 416[ --with-system-libs Use libs already on system -- enables all 417 --with-system-* flags except 418 odbc/sane/xrender-header(s) 419],,) 420AC_ARG_WITH(system-headers, 421[ --with-system-headers Use headers already on system -- enables all 422 --with-system-* flags for external packages 423 whose headers are the only entities used i.e. 424 boost/vigra/odbc/sane/xrender-header(s) 425],,) 426AC_ARG_WITH(system-jars, 427[ --without-system-jars When building with --with-system-libs, also the 428 needed jars are expected on the system. Use this to 429 disable that. 430 (except for the db case where --with-system-db 431 *has to* imply using the db.jar from there, too) 432],,) 433AC_ARG_WITH(system-zlib, 434[ --with-system-zlib Use zlib already on system 435],,) 436AC_ARG_WITH(system-nss, 437[ --with-system-nss Use NSS already on system 438],,) 439AC_ARG_WITH(system-openssl, 440[ --with-system-openssl Use OpenSSL already on system 441],,) 442AC_ARG_WITH(system-jpeg, 443[ --with-system-jpeg Use jpeg already on system 444],,) 445AC_ARG_WITH(system-expat, 446[ --with-system-expat Use expat already on system 447],,) 448AC_ARG_WITH(system-libxml, 449[ --with-system-libxml Use libxml already on system 450],,) 451AC_ARG_WITH(static-system-libs, 452[ --with-static-system-libs=LIST 453 Comma-separated list of system libraries to link 454 statically, each NAME or NAME:DIR, e.g. 455 "libxml,libxslt,curl,openssl,libiconv:/usr/local". 456 Supported: libxml, libxslt, curl, openssl, libiconv. 457 NAME alone uses the prefix the matching 458 --with-system-NAME resolved (openssl: the prefix 459 and libdir its openssl.pc reports); libiconv has no such 460 option, so it always needs the :DIR form. Without 461 this the archive is used only when the prefix 462 happens to have no dylib, so a dylib appearing 463 there silently switches the build to dynamic 464 linking. 465],,) 466AC_ARG_WITH(system-python, 467[ --with-system-python Use python already on system 468],,) 469AC_ARG_WITH(system-icu, 470[ --with-system-icu Use icu already on system 471],,) 472AC_ARG_WITH(system-poppler, 473[ --with-system-poppler Use poppler already on system 474],,) 475AC_ARG_WITH(system-lucene, 476[ --with-system-lucene Use lucene already on system 477],,) 478AC_ARG_WITH(lucene-core-jar, 479[ --with-lucene-core-jar=JARFILE Specify path to jarfile manually ], 480[ LUCENE_CORE_JAR="$withval" 481]) 482AC_ARG_WITH(lucene-analyzers-jar, 483[ --with-lucene-analyzers-jar=JARFILE Specify path to jarfile manually ], 484[ LUCENE_ANALYZERS_JAR="$withval" 485]) 486AC_ARG_ENABLE(mysql-connector, 487[ --enable-mysql-connector enables the build of the MySQL Connector/OOo extension. 488 This requires access to the MySQL Connector/C (aka libmysql) to be given, too, with 489 either the --with-system-mysql or --with-libmysql-path option. 490],,) 491AC_ARG_WITH(system-mysql, 492[ --with-system-mysql Use MySQL libraries already on system, for building the MySQL Connector/OOo extension. 493 Requires MYSQLCONFIG to point to the mysql_config executable. 494],,) 495AC_ARG_WITH(libmysql-path, 496[ --with-libmysql-path Use Connector/C (libmysql) installation for building the MySQL Connector/OOo extension. 497 498 Usage: --with-libmysql-path=<absolute path to your Connector/C installation> 499],,) 500AC_ARG_WITH(system-mysql-cppconn, 501[ --with-system-mysql-cppconn Use MySQL C++ Connector libraries already on system 502],,) 503AC_ARG_WITH(system-hsqldb, 504[ --with-system-hsqldb Use hsqldb already on system 505],,) 506AC_ARG_WITH(hsqldb-jar, 507[ --with-hsqldb-jar=JARFILE Specify path to jarfile manually ], 508[ HSQLDB_JAR="$withval" 509]) 510AC_ARG_WITH(system-beanshell, 511[ --with-system-beanshell Use beanshell already on system (default) 512],,) 513AC_ARG_ENABLE(beanshell, 514[ --enable-beanshell Enable the use of beanshell. 515],,) 516AC_ARG_WITH(beanshell-jar, 517[ --with-beanshell-jar=JARFILE Specify path to jarfile manually ], 518[ BSH_JAR="$withval" 519]) 520AC_ARG_ENABLE(pdfimport, 521[ --enable-pdfimport enables the build of the PDF Import extension 522],,) 523AC_ARG_ENABLE(wiki-publisher, 524[ --enable-wiki-publisher enables the build of the Wiki Publisher extension 525],,) 526AC_ARG_WITH(commons-lang-jar, 527[ --with-commons-lang-jar=JARFILE Specify path to jarfile manually ], 528[ COMMONS_LANG_JAR="$withval" 529]) 530AC_ARG_WITH(commons-logging-jar, 531[ --with-commons-logging-jar=JARFILE Specify path to jarfile manually ], 532[ COMMONS_LOGGING_JAR="$withval" 533]) 534AC_ARG_ENABLE(report-builder, 535[ --enable-report-builder enables the build of the Report Builder extension 536],,) 537AC_ARG_WITH(sac-jar, 538[ --with-sac-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 539[ SAC_JAR="$withval" 540]) 541AC_ARG_WITH(libxml-jar, 542[ --with-libxml-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 543[ LIBXML_JAR="$withval" 544]) 545AC_ARG_WITH(flute-jar, 546[ --with-flute-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 547[ FLUTE_JAR="$withval" 548]) 549AC_ARG_WITH(jfreereport-jar, 550[ --with-jfreereport-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 551[ JFREEREPORT_JAR="$withval" 552]) 553AC_ARG_WITH(liblayout-jar, 554[ --with-liblayout-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 555[ LIBLAYOUT_JAR="$withval" 556]) 557AC_ARG_WITH(libloader-jar, 558[ --with-libloader-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 559[ LIBLOADER_JAR="$withval" 560]) 561AC_ARG_WITH(libformula-jar, 562[ --with-libformula-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 563[ LIBFORMULA_JAR="$withval" 564]) 565AC_ARG_WITH(librepository-jar, 566[ --with-librepository-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 567[ LIBREPOSITORY_JAR="$withval" 568]) 569AC_ARG_WITH(libfonts-jar, 570[ --with-libfonts-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 571[ LIBFONTS_JAR="$withval" 572]) 573AC_ARG_WITH(libserializer-jar, 574[ --with-libserializer-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 575[ LIBSERIALIZER_JAR="$withval" 576]) 577AC_ARG_WITH(libbase-jar, 578[ --with-libbase-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 579[ LIBBASE_JAR="$withval" 580]) 581AC_ARG_WITH(system-saxon, 582[ --with-system-saxon Use saxon already on system (default) 583],,) 584AC_ARG_ENABLE(saxon, 585[ --disable-saxon Disable use of saxon 586],,) 587AC_ARG_WITH(saxon-jar, 588[ --with-saxon-jar=JARFILE Specify path to jarfile manually. This implies --with-system-saxon ], 589[ SAXON_JAR="$withval" 590]) 591AC_ARG_WITH(system-libxslt, 592[ --with-system-libxslt Use libxslt already on system 593],,) 594AC_ARG_WITH(system-odbc, 595[ --with-system-odbc-headers Use the odbc headers already on system 596],,) 597AC_ARG_WITH(system-sane, 598[ --with-system-sane-header Use sane.h already on system 599],,) 600AC_ARG_WITH(system-xrender, 601[ --with-system-xrender-headers Use XRender headers already on system 602],,) 603AC_ARG_WITH(system-curl, 604[ --with-system-curl Use curl already on system 605],,) 606AC_ARG_WITH(system-boost, 607[ --with-system-boost Use boost already on system 608],,) 609AC_ARG_WITH(system-mdds, 610[ --with-system-mdds Use mdds already on system 611],,) 612AC_ARG_WITH(system-vigra, 613[ --with-system-vigra Use vigra already on system 614],,) 615AC_ARG_ENABLE(hunspell, 616[ --enable-hunspell Determines whether to enable the Hunspell library. 617 If enabled, the library will be built unless you 618 specify --with-system-hunspell to use the library 619 already present on your system. 620 If disabled, the Spell Checking component will also 621 be disabled. 622 (Default: hunspell disabled) 623],,enable_hunspell=no) 624AC_ARG_WITH(system-hunspell, 625[ --with-system-hunspell Use libhunspell already on system 626],,) 627AC_ARG_WITH(system-mythes, 628[ --with-system-mythes Use mythes already on system 629],,) 630AC_ARG_ENABLE(hyphen, 631[ --enable-hyphen Determines whether to enable the Hyphen library. 632 If enabled, the library will be built unless you 633 specify --with-system-hyphen to use the library 634 already present on your system. 635 If disabled, the Hyphenator component will also 636 be disabled. 637 (Default: hyphen disabled) 638],,enable_hyphen=no) 639AC_ARG_WITH(system-hyphen, 640[ --with-system-hyphen Use libhypeh already on system 641],,) 642AC_ARG_WITH(system-libtextcat, 643[ --with-system-libtextcat Use libtextcat already on system 644],,) 645AC_ARG_WITH(external-libtextcat-data, 646[ --with-system-libtextcat-data Use libtextcat data already on system 647],,) 648AC_ARG_WITH(system-redland, 649[ --with-system-redland Use redland library already on system 650],,) 651AC_ARG_WITH(stlport, 652[ --with-stlport Only building --without-stlport is supported. 653], WITH_STLPORT=$withval , WITH_STLPORT=no) 654AC_ARG_WITH(jdk-home, 655[ --with-jdk-home if you have installed JDK 1.3 or later on your system 656 please supply the path here. 657 Note that this is not the location of the Java binary 658 but the location of the entire distribution. 659 660 Usage: --with-jdk-home=<absolute path to JDK home> 661],,) 662AC_ARG_WITH(java, 663[ --with-java Build with[[out]] Java support. If you use 664 --without-java/--with-java=no then the build will have 665 no support for Java components, applets, accessibility 666 or XML filters. 667], if test "$withval" = "yes"; then WITH_JAVA=java; else WITH_JAVA=$withval; fi, WITH_JAVA=java) 668AC_ARG_ENABLE(gcjaot, 669[ --enable-gcjaot Build with[[out]] using Ahead of Time java compilation 670 support to speed up buildsi by compiling the jars also 671 to native code.. 672 --enable-gcjaot is only known to work with bytecode 673 created with gcj or ecj 674],,) 675AC_ARG_WITH(ant-home, 676[ --with-ant-home If you have installed Apache Ant on your system, 677 please supply the path here. 678 Note that this is not the location of the Ant binary 679 but the location of the entire distribution. 680 681 Usage: --with-ant-home=<absolute path to Ant home> 682],,) 683AC_ARG_WITH(junit, 684[ --with-junit Specifies the JUnit 4 jar file to use for JUnit-based 685 tests. --without-junit disables those tests. Not 686 relevant in the --without-java case. 687 688 Usage: --with-junit=<absolute path to JUnit 4 jar> 689],,with_junit=yes) 690AC_ARG_WITH(hamcrest-core, 691[ --with-hamcrest-core Specifies the hamcrest-core jar file to use for 692 JUnit-based tests. --without-junit disables those 693 tests. Not relevant in the --without-java or 694 --without-junit cases, and only needed for JUnit 695 >= 4.11. 696],,with_hamcrest_core=yes) 697AC_ARG_WITH(perl-home, 698[ --with-perl-home If you have installed the Perl 5 Distribution, on your 699 system, please supply the path here. 700 Note that this is not the location of the Perl binary 701 but the location of the entire distribution. 702 703 Usage: --with-perl-home=<absolute path to Perl 5 home> 704],,) 705AC_ARG_WITH(cl-home, 706[ --with-cl-home For Windows NT users, please supply the path 707 for the Microsoft C/C++ compiler. 708 Note that this is not the location of the compiler 709 binary but the location of the entire distribution. 710 711 Usage: --with-cl-home=<absolute path to Microsoft C/C++ compiler home> 712],,) 713AC_ARG_WITH(mspdb-path, 714[ --with-mspdb-path For Microsoft C/C++ compiler users, please supply the 715 path pointing to the mspdb71.dll (.NET 2003). 716 717 Usage: --with-mspdb-path=<absolute path to mspdb71.dll> 718],,) 719AC_ARG_WITH(midl-path, 720[ --with-midl-path For Microsoft C/C++ .NET compiler users, please supply 721 the path pointing to the midl.exe. 722 723 Usage: --with-midl-path=<absolute path to midl.exe> 724],,) 725AC_ARG_WITH(csc-path, 726[ --with-csc-path For Microsoft C/C++ .NET compiler users, please supply 727 the path pointing to the csc.exe. 728 729 Usage: --with-csc-path=<absolute path to csc.exe> 730],,) 731AC_ARG_WITH(host-python, 732[ --with-host-python For Windows users on a modern MSVC, the Python 3.9 or 733 newer used to RUN the bundled Python's build scripts. 734 It is not the Python that gets shipped. Autodetected 735 from the path; supply it when that finds nothing, or 736 the build would try to download one. 737 738 Usage: --with-host-python=<absolute path to python.exe> 739],,) 740AC_ARG_WITH(nsis-path, 741[ --with-nsis-path For Windows users, please supply the path to the 742 "Nullsoft Scriptable Install System" (NSIS). If NSIS 743 is found in the path or this option is supplied a self 744 contained executable installer for Apache OpenOffice 745 will be created. 746 747 Usage: --with-nsis-path=<absolute path to nsis.exe> 748],,) 749AC_ARG_WITH(frame-home, 750[ --with-frame-home For Microsoft C/C++ .NET compiler users, please supply 751 the path pointing to lib/mscoree.lib, usually 752 something like: 753 "/cygdrive/c/Program Files/Microsoft Visual Studio .NET/FrameworkSDK" 754 755 MS Visual Toolkit compiler users, please supply the 756 path pointing to lib/msvcrt.lib, usually something 757 like: 758 "/cygdrive/c/Program Files/Microsoft Visual Studio .NET 2003/Vc7" 759 760 Usage: --with-frame-home=<absolute path to Framework SDK [[home]]> 761],,) 762AC_ARG_WITH(msbuild-path, 763[ --with-msbuild-path For Windows users building with a VS2015-or-newer 764 toolset: the directory holding MSBuild.exe. Only 765 needed when it is not beside the toolset. 766 767 Usage: --with-msbuild-path=<absolute path to MSBuild.exe directory> 768],,) 769 770AC_ARG_WITH(windows-sdk-home, 771[ --with-windows-sdk-home For Windows users building with a VS2015-or-newer 772 toolset: the root of the Windows 10/11 SDK, i.e. the 773 directory holding Include/, Lib/ and bin/. Only 774 needed when it is not in the default location. 775 776 Usage: --with-windows-sdk-home=<absolute path to Windows Kits\10> 777],,) 778 779AC_ARG_WITH(windows-sdk-version, 780[ --with-windows-sdk-version 781 Pin the Windows 10/11 SDK to one version instead of 782 taking the newest complete one that is installed. 783 784 Usage: --with-windows-sdk-version=10.0.19041.0 785],,) 786 787AC_ARG_WITH(psdk-home, 788[ --with-psdk-home For Windows users, please supply the path to the 789 Microsoft Platform SDK. 790 791 Usage: --with-psdk-home=<absolute path to Microsoft Platform SDK> 792],,) 793AC_ARG_WITH(directx-home, 794[ --with-directx-home For Windows users, please supply the path to the 795 Microsoft DirectX SDK. 796 797 Usage: --with-directx-home=<absolute path to Microsoft DirectX SDK> 798],,) 799AC_ARG_WITH(mozilla-build, 800[ --with-mozilla-build For Windows users, please supply the path to the 801 mozilla build tools. 802 803 Usage: --with-mozilla-build=<absolute path to mozilla build tools> 804 805 At the moment of this writing, an installer for the mozilla build tools 806 can be obtained from https://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32/. 807],[MOZILLABUILD=$withval],) 808AC_ARG_WITH(local-solenv, 809[ --with-local-solenv If you have solenv in a location other than ./solenv, 810 please supply the path here. 811 812 Usage: --with-local-solenv=<absolute path to solenv> 813],,) 814AC_ARG_WITH(local-solver, 815[ --with-local-solver if you have solver in a location other than ./solver, 816 please supply the path here. 817 818 Usage: --with-local-solver=<absolute path to solver> 819],,) 820AC_ARG_ENABLE(javascript, 821[ --disable-javascript Disables support for JavaScript macros. 822],,) 823AC_ARG_WITH(system-coinmp, 824[ --with-system-coinmp Use CoinMP library already installed on the system 825],,) 826AC_ARG_ENABLE(coinmp, 827[ --disable-coinmp Do not use CoinMP as the Calc solver. 828],,) 829AC_ARG_ENABLE(check-only, 830[ --enable-check-only Use this option option if you just want to check your 831 environment. This option stops the generation of an 832 ????env.set 833 834 Usage: --enable-check-only=yes 835],,) 836AC_ARG_ENABLE(ccache-skip, 837[[ --enable-ccache-skip [default=auto] allow the use of --ccache-skip to 838 escape compiler flags that would otherwise prevent 839 caching of the result (currently used on Mac only) 840 NOTE: requires patched version because of a bug in 841 ccache (see issue 104567 for details and patch) 842 explicitly enable if your version of ccache does not 843 identify as version 2.4_OOo 844]],,enable_ccache_skip=auto) 845AC_ARG_WITH(lang, 846[ --with-lang Use this option to build Apache OpenOffice with 847 additional language support. English (US) is always 848 included by default. Separate multiple languages with 849 space. For all languages, use --with-lang=ALL. 850 851 Usage: --with-lang="es sw tu cs sk" 852],,) 853AC_ARG_WITH(poor-help-localizations, 854[ --with-poor-help-localizations 855 Use this option to specify which languages have 856 unusable help localizations. Separate multiple 857 languages with space. 858 859 Usage: --with-poor-help-localizations="af ar be-BY ca" 860],,) 861AC_ARG_WITH(dict, 862[ --with-dict Use this option to build Apache OpenOffice with 863 dictionary support. ALL dictionaries are always 864 included by default unless overridden with 865 this option. Separate multiple dictionaries with 866 commas. For all dictionaries, use --with-dict=ALL. 867 868 Usage: --with-dict=ENGB,ENUS,ITIT 869],,) 870AC_ARG_WITH(intro-bitmaps, 871[ --with-intro-bitmaps Prefer the specified intro bitmaps over the 872 the default one. Can be more than one (separated by 873 commas), the order means priority of fallback if the 874 first does not exist (in the installed tree). 875 876 Usage: --with-intro-bitmaps=/path/my_ooo_intro.png 877],,) 878AC_ARG_WITH(about-bitmaps, 879[ --with-about-bitmaps Similarly to --with-intro-bitmaps, this allows 880 specification of bitmaps for the About box. 881 882 Usage: --with-about-bitmaps=/path/my_ooo_about.png 883],,) 884AC_ARG_WITH(vendor, 885[ --with-vendor Set vendor of the build. 886 887 Usage: --with-vendor="John the Builder" 888],,) 889AC_ARG_WITH(unix-wrapper, 890[ --with-unix-wrapper Redefines the name of the UNIX wrapper that will be used 891 in the desktop files and in the desktop-integration RPMs. 892 893 Usage: --with-unix-wrapper=ooffice 894],,) 895AC_ARG_WITH(asm-home, 896[ --with-asm-home For Windows users, please supply the path for the 897 ml.exe assembler. 898 899 Usage: --with-asm-home=<path to ml.exe directory> 900],,) 901AC_ARG_WITH(nasm-home, 902[ --with-nasm-home For Windows users, please supply the path for the 903 nasm.exe assembler. 904 905 Usage: --with-nasm-home=<path to nasm.exe directory> 906],,) 907AC_ARG_WITH(os-version, 908[ --with-os-version For FreeBSD users, use this option option to override 909 the detected OSVERSION. 910 911 Usage: --with-os-version=<OSVERSION> 912],,) 913AC_ARG_WITH(unzip-home, 914[ --with-unzip-home Deprecated: use --with-zip-home instead],,) 915AC_ARG_WITH(zip-home, 916[ --with-zip-home If you use a non standard zip, for example Windows 917 please supply the path for zip 918 919 Usage: --with-zip-home=<path to zip executable> 920],,) 921AC_ARG_WITH(mingwin, 922[ --with-mingwin For Windows users, use the mingwin32 compiler within 923 cygwin environment 924 925 Usage: --with-mingwin=yes 926 927 For !Windows use, use the mingw32 C++ compiler to 928 (re-) build unowinreg.dll. Specify the MinGW C++ 929 Compilers name. 930 931 Usage: --with-mingwin=i586-mingw32msvc-g++ 932],WITH_MINGWIN=$withval,WITH_MINGWIN=0) 933AC_ARG_WITH(build-version, 934[ --with-build-version Allows the builder to add a custom version tag 935 that will appear in the Help/About box for QA 936 purposes. 937 938 Usage: --with-build-version="Built by Jim" 939],with_build_version=$withval) 940AC_ARG_WITH(alloc, 941[ --with-alloc Define which allocator to build with 942 (choices are oo, system, tcmalloc, jemalloc) 943 944 Note that on FreeBSD/NetBSD system==jemalloc 945],,) 946AC_ARG_ENABLE(jemalloc, 947[ --enable-jemalloc Download, build and bundle jemalloc and use it as the 948 allocator (Linux and macOS only). Use 949 --with-alloc=jemalloc instead to link a jemalloc 950 already installed on the system. 951],,) 952AC_ARG_ENABLE(verbose, 953[ --enable-verbose Increase build verbosity. 954 --disable-verbose Decrease build verbosity. 955],,) 956AC_ARG_ENABLE(dependency-tracking, 957[ --disable-dependency-tracking Disables generation of dependency information. 958],,) 959AC_ARG_ENABLE(category-b, 960[ --enable-category-b Activate components under a category B license 961 (see https://www.apache.org/legal/3party.html#category-b): 962 MPL (hunspell, hyphen, nss, saxon, rhino), 963 CPL (silgraphite), CPL/EPL (CoinMP), OFL (fonts). 964 Flags for individual libraries override this one. 965],,) 966AC_ARG_WITH(arm-target, 967[ --arm-target The minimal targeted arm processor 968 used for the build environment. 969 Cases : 970 arm-target < 6 : armv4t compatibility 971 arm-target = 6 : exact armv6 compatibility 972 arm-target > 6 : armv7-a compatibility 973 974 Usage: --with-arm-target=7 975],with_arm_target=$withval,with_arm_target=4) 976AC_ARG_WITH(macosx-target, 977[ --macosx-target The minimal macOS/OSX deployment and build target 978 979 Usage: --with-macosx-target=11.0 980],with_macosx_target=$withval,with_macosx_target=11.0) 981AC_ARG_WITH(macosx-sdk, 982[ --macosx-sdk The macOS SDK to build against 983 984 Usage: --with-macosx-sdk=10.11 985 (or full path: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk) 986],with_macosx_sdk=$withval,) 987AC_ARG_WITH(macosx-codesigning-identity, 988[ --with-macosx-codesigning-identity 989 Code-sign the macOS application bundle and disk image 990 while packaging, with this codesign identity 991 ("-" for ad-hoc). Unset: package unsigned, as before. 992 Traditional macOS language packs cannot be installed 993 into a signed application because that would invalidate 994 its resource seal. 995 996 Usage: --with-macosx-codesigning-identity="Developer ID Application: ..." 997],with_macosx_codesigning_identity=$withval,) 998AC_ARG_WITH(macosx-codesigning-keychain, 999[ --with-macosx-codesigning-keychain 1000 Keychain holding that identity (default: the 1001 keychain search list, i.e. normally the login keychain). 1002 1003 Usage: --with-macosx-codesigning-keychain=/path/to/build.keychain-db 1004],with_macosx_codesigning_keychain=$withval,) 1005AC_ARG_WITH(macosx-notary-profile, 1006[ --with-macosx-notary-profile 1007 After code-signing with a Developer ID identity, submit 1008 the application and disk image to Apple's notary service 1009 and staple the ticket, using this "xcrun notarytool 1010 store-credentials" keychain profile name. Requires 1011 --with-macosx-codesigning-identity to be a real 1012 Developer ID identity (not "-"). Unset: package signed 1013 but not notarized, as before. 1014 1015 Usage: --with-macosx-notary-profile=my-notary-profile 1016],with_macosx_notary_profile=$withval,) 1017AC_ARG_WITH(rat-scan, 1018[ --with-rat-scan Scan source code for license headers. 1019 Use as --with-rat-scan to automatically download pre-built Rat binaries. 1020 Alternatively use as --with-rat-scan=<path-to-rat-direcetory> to use 1021 a separately installed library. 1022],with_rat_scan=$withval,) 1023 1024BUILD_TYPE="OOo" 1025ADDITIONAL_REPOSITORIES="../ext_libraries" 1026SCPDEFS="" 1027 1028dnl =================================================================== 1029dnl Check configure script vs. configure.ac 1030dnl =================================================================== 1031AC_MSG_CHECKING([whether configure is up-to-date]) 1032if test "configure" -ot "configure.ac"; then 1033 AC_MSG_RESULT([no]) 1034 AC_MSG_ERROR([configure is not up-to-date, run autoconf first!]) 1035else 1036 AC_MSG_RESULT([yes]) 1037fi 1038dnl =================================================================== 1039dnl Message. 1040dnl =================================================================== 1041echo "********************************************************************" 1042echo "* *" 1043echo "* Apache OpenOffice build configuration. *" 1044echo "* *" 1045echo "* The configure process checks your platform to see whether *" 1046echo "* you can build Apache OpenOffice on it. *" 1047echo "* This process checks all pre-requisites and generates a file *" 1048echo "* containing the necessary environment variables. *" 1049echo "* Source this file after configure has ended successfully. *" 1050echo "* *" 1051echo "* Warnings that are generated during the configure process *" 1052echo "* must be taken into account since it can be a reason for *" 1053echo "* an unsuccessful build of Apache OpenOffice. *" 1054echo "* *" 1055echo "********************************************************************" 1056echo "" 1057echo "********************************************************************" 1058echo "* *" 1059echo "* Checking the platform pre-requisites. *" 1060echo "* *" 1061echo "********************************************************************" 1062echo "" 1063dnl =================================================================== 1064dnl Configure pre-requisites. 1065dnl =================================================================== 1066cat /dev/null > warn 1067 1068AC_PROG_EGREP 1069if test -z "$GREP"; then 1070GREP=$EGREP 1071fi 1072AC_PATH_PROG(AWK, gawk) 1073 1074dnl =================================================================== 1075dnl A space in $AWK is fatal, so take the 8.3 form when there is one 1076dnl =================================================================== 1077dnl configure.ac spells $AWK unquoted in some forty places, so a path 1078dnl with a space in it does not merely look untidy -- it word-splits, 1079dnl and the build dies a long way from here with 1080dnl 1081dnl ./configure: line NNNN: /cygdrive/c/Program: No such file 1082dnl 1083dnl That is what a Cygwin carrying gawk-<version>.exe but no plain 1084dnl gawk gives you: the only gawk left on PATH is then Git for 1085dnl Windows' copy, under C:\Program Files. 1086dnl 1087dnl Fixing it on the Cygwin side -- copying gawk-<version>.exe to 1088dnl gawk.exe -- does work, and does not survive the next Cygwin 1089dnl update, which is why it keeps coming back. The 8.3 form of the 1090dnl very same file has no space and needs no upkeep at all. 1091case "$AWK" in 1092*\ *) 1093 _awk_short=`cygpath -d "$AWK" 2>/dev/null` 1094 if test -n "$_awk_short"; then 1095 _awk_short=`cygpath -u "$_awk_short" 2>/dev/null` 1096 fi 1097 if test -n "$_awk_short" -a -x "$_awk_short"; then 1098 AC_MSG_NOTICE([$AWK has a space in it, using $_awk_short instead]) 1099 AWK="$_awk_short" 1100 else 1101 AC_MSG_WARN([$AWK has a space in it and has no 8.3 name. 1102Either put a space-free awk earlier on PATH, or enable 8.3 names on that 1103volume; several checks below will fail on the space otherwise.]) 1104 fi 1105 ;; 1106esac 1107if test -z "$AWK"; then 1108 AC_MSG_ERROR([install GNU awk to build Apache OpenOffice]) 1109fi 1110 1111AC_PATH_PROGS(SED, sed ) 1112if test -z "$SED"; then 1113 AC_MSG_ERROR([install sed to build Apache OpenOffice]) 1114fi 1115 1116AC_MSG_CHECKING([for solenv environment]) 1117if test -z "$with_local_solenv"; then 1118 LOCAL_SOLENV="DEFAULT" 1119 AC_MSG_RESULT([default]) 1120else 1121 LOCAL_SOLENV=$with_local_solenv 1122 AC_MSG_RESULT([$with_local_solenv]) 1123fi 1124AC_SUBST(LOCAL_SOLENV) 1125 1126if test "$LOCAL_SOLENV" = "DEFAULT"; then 1127 _solenv="./solenv" 1128else 1129 _solenv="$LOCAL_SOLENV" 1130fi 1131AC_SUBST(_solenv) 1132 1133if test -e $_solenv/inc/minor.mk; then 1134 # Get UPD number from ./solenv/inc/minor.mk 1135 UPD="`$GREP RSCVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`" 1136 AC_SUBST(UPD) 1137 SOURCEVERSION="`$GREP SOURCEVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`" 1138 AC_SUBST(SOURCEVERSION) 1139else 1140 AC_MSG_ERROR([$_solenv/inc/minor.mk missing but needed for architecture/os detecion and proper environment script generation...]) 1141fi 1142 1143 1144dnl ================================================================== 1145dnl Checks for custom pack.lst 1146dnl ================================================================== 1147AC_MSG_CHECKING([for custom pack.lst]) 1148CUSTOM_PACK_LIST= 1149USE_PACKAGER= 1150if test -n "$with_packager_list" ; then 1151 if test -e $with_packager_list; then 1152 CUSTOM_PACK_LIST=$with_packager_list 1153 USE_PACKAGER=YES 1154 fi 1155fi 1156if test -n "$CUSTOM_PACK_LIST"; then 1157 AC_MSG_RESULT([$CUSTOM_PACK_LIST]) 1158else 1159 AC_MSG_RESULT([no]) 1160fi 1161AC_SUBST(CUSTOM_PACK_LIST) 1162AC_SUBST(USE_PACKAGER) 1163 1164 1165dnl =================================================================== 1166dnl Checks for the operating system and processor. 1167dnl =================================================================== 1168AC_CANONICAL_TARGET 1169if test "$build" != "$host" -o "$build" != "$target" \ 1170 -o "$host" != "$target"; then 1171 AC_MSG_WARN([cross-compiling by any means is not supported (yet)!]) 1172 echo "cross-compiling by any means is not supported (yet)!" >> warn 1173fi 1174 1175if echo "$build_os" | $GREP cygwin; then 1176 AC_MSG_CHECKING([Cygwin version]) 1177 CygwinVer=`uname -r` 1178 AC_MSG_RESULT([$CygwinVer]) 1179 if test "`echo $CygwinVer | $AWK -F . '{ print $1$2 }'`" -lt "15"; then 1180 AC_MSG_ERROR([You need at least Cygwin V1.5.x]) 1181 fi 1182else 1183 CygwinVer="false" 1184fi 1185 1186# get info about the system provided release/version details 1187head /etc/*-release 1188uname -a 1189 1190dnl =================================================================== 1191dnl The following is a list of supported systems. 1192dnl Sequential to keep the logic very simple 1193dnl These values may be checked and reset later. 1194dnl =================================================================== 1195case "$build_os" in 1196 solaris*) 1197 test_gtk=yes 1198 test_cairo=yes 1199 test_kde=yes 1200 test_cups=yes 1201 test_randr=yes 1202 test_freetype=yes 1203 test_gstreamer=yes 1204 _os=SunOS 1205 AC_PATH_PROG( GNUTAR, gtar,,$PATH:/usr/sfw/bin) 1206 if test -z "$GNUTAR"; then 1207 AC_MSG_ERROR([gtar (gnu tar) not found but needed. Install it (SUN Freeware package).]) 1208 fi 1209 AC_SUBST(GNUTAR) 1210 1211 dnl =========================================================== 1212 dnl check whether we're using solaris 6,7,8 - sparc or intel. 1213 dnl =========================================================== 1214 AC_MSG_CHECKING([the Solaris operating system release]) 1215 _os_release=`echo $build_os | $SED -e s/solaris2\.//` 1216 if test "$_os_release" -lt "6"; then 1217 AC_MSG_ERROR([use solaris >= 6 to build Apache OpenOffice]) 1218 else 1219 AC_MSG_RESULT([ok ($_os_release)]) 1220 fi 1221 1222 dnl check whether we're using a sparc or i386 processor 1223 AC_MSG_CHECKING([the processor type]) 1224 if test "$build_cpu" = "sparc" -o "$build_cpu" = "i386"; then 1225 AC_MSG_RESULT([ok ($build_cpu)]) 1226 else 1227 AC_MSG_ERROR([only sparc and i386 processors are supported]) 1228 fi 1229 ;; 1230 linux-gnu*|k*bsd*-gnu*) 1231 test_gtk=yes 1232 test_cairo=yes 1233 test_kde=yes 1234 test_kde4=yes 1235 test_cups=yes 1236 test_randr=yes 1237 test_freetype=yes 1238 test_gstreamer=yes 1239 _os=Linux 1240 ;; 1241 gnu) 1242 test_cups=no 1243 _os=GNU 1244 ;; 1245 cygwin*) # Windows 1246 test_cups=no 1247 test_cairo=yes 1248 test_freetype=no 1249 test_gstreamer=no 1250 _os=WINNT 1251 ;; 1252 darwin*) # Mac OS X 1253 test_cups=yes 1254 test_gtk=yes 1255 test_cairo=yes 1256 test_randr=no 1257 test_freetype=no 1258 test_gstreamer=no 1259 _os=Darwin 1260 if test "$enable_systray" = "yes" && test "$enable_gtk" != "no"; then 1261 AC_MSG_WARN([Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray]) 1262 echo "Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray" >>warn 1263 enable_systray=no 1264 fi 1265 SDKROOT="`xcrun --sdk macosx --show-sdk-path`" 1266 export SDKROOT 1267 if test ! -n "$CC"; then 1268 CC="`xcrun -f clang`" 1269 fi 1270 if test ! -n "$CXX"; then 1271 CXX="`xcrun -f clang++` -std=c++11" 1272 macos_c11=`pwd`/macos_c11 1273 echo "#!/bin/sh" > $macos_c11 1274 echo "$CXX \"\$@\"" >> $macos_c11 1275 chmod 755 $macos_c11 1276 CXX="$macos_c11" 1277 fi 1278 # Don't use OSVERSION until we know no conflicts result from it 1279 _darwin_version="`uname -r | $AWK -F . '{ print $1 }'`" 1280 # Map the Darwin (XNU) major version to the macOS version. 1281 # Darwin 6..19 => macOS 10.(darwin-4) (10.2 .. 10.15) 1282 # Darwin 20+ => macOS (darwin-9) (11, 12, 13, ...) 1283 if test "$_darwin_version" -ge 20; then 1284 _osx_version="`expr $_darwin_version - 9`" 1285 else 1286 _osx_version="10.`expr $_darwin_version - 4`" 1287 fi 1288 AC_MSG_NOTICE([Detected Darwin version: $_darwin_version ($_osx_version)]) 1289 # Detect the build CPU architecture. Apple Silicon (arm64) reports 1290 # "arm64" from uname -m and maps to the aarch64 toolchain/bridge. 1291 _darwin_cpu="`uname -m`" 1292 case "$_darwin_cpu" in 1293 arm64|aarch64) 1294 AC_MSG_NOTICE([Detected Apple Silicon (arm64) build host]) 1295 ;; 1296 x86_64|i*86) 1297 AC_MSG_NOTICE([Detected Intel (x86_64) build host]) 1298 ;; 1299 *) 1300 AC_MSG_ERROR([Unsupported macOS CPU architecture: $_darwin_cpu]) 1301 ;; 1302 esac 1303 ;; 1304 os2*) 1305 test_x=no 1306 test_cups=no 1307 test_randr=no 1308 test_gtk=no 1309 test_freetype=no 1310 test_gstreamer=no 1311 test_cairo=yes 1312 _os=OS2 1313 ;; 1314 freebsd*) 1315 test_gtk=yes 1316 test_cairo=yes 1317 test_kde=yes 1318 test_kde4=yes 1319 test_cups=yes 1320 test_randr=yes 1321 test_freetype=yes 1322 test_gstreamer=yes 1323 AC_MSG_CHECKING([the FreeBSD operating system release]) 1324 if test -n "$with_os_version"; then 1325 OSVERSION="$with_os_version" 1326 else 1327 OSVERSION=`/sbin/sysctl -n kern.osreldate` 1328 fi 1329 AC_MSG_RESULT([found OSVERSION=$OSVERSION]) 1330 AC_MSG_CHECKING([which thread library to use]) 1331 if test "$OSVERSION" -lt "500016"; then 1332 PTHREAD_CFLAGS="-D_THREAD_SAFE" 1333 PTHREAD_LIBS="-pthread" 1334 elif test "$OSVERSION" -lt "502102"; then 1335 PTHREAD_CFLAGS="-D_THREAD_SAFE" 1336 PTHREAD_LIBS="-lc_r" 1337 else 1338 PTHREAD_CFLAGS="" 1339 PTHREAD_LIBS="-pthread" 1340 fi 1341 AC_MSG_RESULT([$PTHREAD_LIBS]) 1342 _os=FreeBSD 1343 ;; 1344 osf) 1345 test_cups=no 1346 test_randr=no 1347 _os=OSF1 1348 ;; 1349 netbsd) 1350 test_gtk=yes 1351 test_cairo=yes 1352 test_kde=yes 1353 test_kde4=yes 1354 test_cups=no 1355 test_randr=yes 1356 test_freetype=yes 1357 test_gstreamer=yes 1358 PTHREAD_CFLAGS="-pthread" 1359 PTHREAD_LIBS="-pthread -lpthread" 1360 _os=NetBSD 1361 ;; 1362 aix*) 1363 test_cups=no 1364 test_randr=no 1365 test_freetype=yes 1366 test_gstreamer=yes 1367 PTHREAD_LIBS=-pthread 1368 echo "AIX is an alpha port --- Use at own risk" >> warn 1369 _os=AIX 1370 ;; 1371 *) 1372 AC_MSG_ERROR([$_os operating system is not suitable to build Apache OpenOffice!]) 1373 ;; 1374esac 1375 1376AC_SUBST(OSVERSION) 1377AC_SUBST(PTHREAD_CFLAGS) 1378AC_SUBST(PTHREAD_LIBS) 1379 1380 1381dnl Ensure pkg-config is initialized before any possible use 1382PKG_PROG_PKG_CONFIG 1383 1384 1385dnl =================================================================== 1386dnl Set the ENABLE_CRASHDUMP variable. 1387dnl =================================================================== 1388AC_MSG_CHECKING([whether to enable crashdump feature]) 1389if test "$enable_crashdump" = "yes"; then 1390 ENABLE_CRASHDUMP="TRUE" 1391 BUILD_TYPE="$BUILD_TYPE CRASHREP" 1392 AC_MSG_RESULT([yes]) 1393else 1394 ENABLE_CRASHDUMP="" 1395 AC_MSG_RESULT([no]) 1396fi 1397AC_SUBST(ENABLE_CRASHDUMP) 1398 1399if test "$_os" = "WINNT"; then 1400 BUILD_TYPE="$BUILD_TYPE TWAIN" 1401fi 1402 1403if test "$_os" = "WINNT"; then 1404 dnl =================================================================== 1405 dnl Set the VC_STANDARD variable. 1406 dnl =================================================================== 1407 AC_MSG_CHECKING([whether to use the standard non-optimizing compiler]) 1408 if test "$enable_cl_standard" = "" -o "$enable_cl_standard" = "no"; then 1409 VC_STANDARD="" 1410 AC_MSG_RESULT([no]) 1411 else 1412 VC_STANDARD="TRUE" 1413 AC_MSG_RESULT([yes]) 1414 fi 1415 AC_SUBST(VC_STANDARD) 1416fi 1417 1418if test "$_os" = "WINNT"; then 1419 dnl =================================================================== 1420 dnl Set the BUILD_X64 variable. 1421 dnl =================================================================== 1422 AC_MSG_CHECKING([whether to build/use the Windows 64bit shell extensions]) 1423 if test "$enable_win_x64_shellext" = "" -o "$enable_win_x64_shellext" = "no"; then 1424 BUILD_X64="" 1425 AC_MSG_RESULT([no]) 1426 else 1427 BUILD_X64="TRUE" 1428 AC_MSG_RESULT([yes]) 1429 fi 1430 AC_SUBST(BUILD_X64) 1431 1432 dnl =================================================================== 1433 dnl Set the BUILD_WIN64 variable. 1434 dnl =================================================================== 1435 AC_MSG_CHECKING([whether to build 64 bit OpenOffice on 64 bit Windows]) 1436 if test "$build_cpu" = "x86_64" ; then 1437 if test "x$enable_win64" != "xno" ; then 1438 BUILD_WIN64="TRUE" 1439 AC_MSG_RESULT([yes]) 1440 OOWINTOOL="./oowintool" 1441 else 1442 BUILD_WIN64="" 1443 AC_MSG_RESULT([no]) 1444 OOWINTOOL="./oowintool --aoo32-on-win64" 1445 fi 1446 else 1447 if test "x$enable_win64" != "xno" ; then 1448 AC_MSG_ERROR([the --enable-win64 option can only be used on an AMD64 CPU]) 1449 fi 1450 BUILD_WIN64="" 1451 AC_MSG_RESULT([no]) 1452 OOWINTOOL="./oowintool" 1453 fi 1454 AC_SUBST(BUILD_WIN64) 1455fi 1456 1457dnl =================================================================== 1458dnl Set the ENABLE_WERROR variable. (Activate --enable-werror) 1459dnl =================================================================== 1460AC_MSG_CHECKING([whether to turn warnings to errors]) 1461if test -n "$enable_werror" && test "$enable_werror" != "no"; then 1462 ENABLE_WERROR="TRUE" 1463 AC_MSG_RESULT([yes]) 1464 AC_MSG_WARN([Turning warnings to errors has no effect in modules or]) 1465 AC_MSG_WARN([on platforms where it has been disabled explicitly]) 1466 echo "Turning warnings to errors has no effect in modules or on platforms where it has been disabled explicitly" >> warn 1467else 1468 ENABLE_WERROR="FALSE" 1469 AC_MSG_RESULT([no]) 1470fi 1471AC_SUBST(ENABLE_WERROR) 1472 1473dnl =================================================================== 1474dnl Set the ENABLE_DEBUG variable. (Activate --enable-symbols) 1475dnl =================================================================== 1476AC_MSG_CHECKING([whether to do a debug build]) 1477if test -n "$enable_debug" && test "$enable_debug" != "no"; then 1478 ENABLE_DEBUG="TRUE" 1479 if test -z "$enable_symbols"; then 1480 enable_symbols="yes" 1481 fi 1482 AC_MSG_RESULT([yes]) 1483else 1484 ENABLE_DEBUG="FALSE" 1485 AC_MSG_RESULT([no]) 1486fi 1487AC_SUBST(ENABLE_DEBUG) 1488 1489dnl =================================================================== 1490dnl Set the ENABLE_DBGUTIL variable 1491dnl =================================================================== 1492AC_MSG_CHECKING([whether to build with additional debug utilities]) 1493if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then 1494 PROEXT="" 1495 PRODUCT="" 1496 PROFULLSWITCH="" 1497 AC_MSG_RESULT([yes]) 1498else 1499 PRODUCT="full" 1500 PROFULLSWITCH="product=full" 1501 PROEXT=".pro" 1502 AC_MSG_RESULT([no, full product build]) 1503fi 1504AC_SUBST(PRODUCT) 1505AC_SUBST(PROFULLSWITCH) 1506AC_SUBST(PROEXT) 1507 1508dnl =================================================================== 1509dnl First setting is whether to include symbols into final build. 1510dnl =================================================================== 1511AC_MSG_CHECKING([whether to include symbols into final build]) 1512if test -n "$enable_symbols" && test "$enable_symbols" != "no"; then 1513 if test "$enable_symbols" = "yes" -o "$enable_symbols" = "TRUE"; then 1514 ENABLE_SYMBOLS="TRUE" 1515 AC_MSG_RESULT([yes]) 1516 else 1517 if test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then 1518 ENABLE_SYMBOLS="SMALL" 1519 AC_MSG_RESULT([yes, small ones]) 1520 else if test "$enable_symbols" != "no" ; then 1521 echo enable symbols is: $enable_symbols 1522 AC_MSG_ERROR([--enable-symbols only accepts yes, TRUE or SMALL as parameter.]) 1523 else 1524 ENABLE_SYMBOLS= 1525 fi 1526 fi 1527 fi 1528else 1529 ENABLE_SYMBOLS= 1530 AC_MSG_RESULT([no]) 1531fi 1532AC_SUBST(ENABLE_SYMBOLS) 1533 1534dnl =================================================================== 1535dnl Set the ENABLE_SANITIZER variable. (Activate --enable-sanitizer) 1536dnl =================================================================== 1537AC_MSG_CHECKING([whether to enable address sanitizer]) 1538if test -n "$enable_sanitizer" && test "$enable_sanitizer" != "no"; then 1539 ENABLE_SANITIZER="TRUE" 1540 AC_MSG_RESULT([yes]) 1541else 1542 ENABLE_SANITIZER="FALSE" 1543 AC_MSG_RESULT([no]) 1544fi 1545AC_SUBST(ENABLE_SANITIZER) 1546 1547dnl =================================================================== 1548dnl Determine if the solver is to be stripped or not. 1549dnl =================================================================== 1550AC_MSG_CHECKING([whether to strip the solver or not.]) 1551if test -n "$enable_strip_solver"; then 1552 if test "$enable_strip_solver" = "yes"; then 1553 DISABLE_STRIP= 1554 else if test "$enable_strip_solver" = "no"; then 1555 DISABLE_STRIP="TRUE" 1556 else 1557 AC_MSG_ERROR([--disable-strip-solver only accepts yes or no as parameter.]) 1558 fi 1559 fi 1560else 1561 if test -n "$ENABLE_SYMBOLS"; then 1562 DISABLE_STRIP="TRUE" 1563 else 1564 DISABLE_STRIP= 1565 fi 1566fi 1567if test -z "$DISABLE_STRIP"; then 1568 AC_MSG_RESULT([yes]) 1569else 1570 AC_MSG_RESULT([no]) 1571fi 1572AC_SUBST(DISABLE_STRIP) 1573 1574dnl =================================================================== 1575dnl Build options 1576dnl =================================================================== 1577 1578# Disable or enable category-B libraries: nss, hunspell, hyphen, saxon, 1579# rhino, silgraphite. 1580 1581# Note that further below they may be enabled or disabled again by 1582# more specific options. 1583 1584ENABLE_CATEGORY_B= 1585 1586AC_MSG_CHECKING([whether to enable category B components]) 1587# Category B modules (libraries): 1588# nss (nss) 1589# hunspell (hunspell) 1590# hyphen (hyphen) 1591# saxon (saxon) 1592# rhino (rhino) 1593# graphite (silgraphite) 1594if test "$enable_category_b" = "yes"; then 1595 ENABLE_CATEGORY_B=YES 1596 enable_nss_module="yes" 1597 enable_hunspell="yes" 1598 enable_hyphen="yes" 1599 enable_saxon="yes" 1600 enable_javascript="yes" 1601 enable_graphite="yes" 1602 enable_coinmp="yes" 1603 enable_category_b_fonts="yes" 1604 1605 AC_MSG_RESULT([yes: allow modules nss, hunspell, hyphen, saxon, rhino, graphite, coinmp to be built]) 1606else 1607 # Disable libraries. 1608 enable_nss_module="no" 1609 enable_hunspell="no" 1610 enable_hyphen="no" 1611 enable_saxon="no" 1612 enable_javascript="no" 1613 enable_graphite="no" 1614 enable_coinmp="no" 1615 enable_category_b_fonts="no" 1616 1617 AC_MSG_RESULT([no: disabled modules nss, hunspell, hyphen, saxon, rhino, graphite, coinmp]) 1618fi 1619AC_SUBST(ENABLE_CATEGORY_B) 1620 1621# gstreamer is used only via pre-installed libraries: not a problem 1622 1623dnl =================================================================== 1624dnl Online Update 1625dnl =================================================================== 1626AC_MSG_CHECKING([whether to enable the Online Update support]) 1627if test "$enable_online_update" = "yes" -o "$enable_online_update" = "TRUE"; then 1628 ENABLE_ONLINE_UPDATE="YES" 1629 SCPDEFS="$SCPDEFS -DENABLE_ONLINE_UPDATE" 1630 AC_MSG_RESULT([yes]) 1631else 1632 ENABLE_ONLINE_UPDATE="" 1633 AC_MSG_RESULT([no]) 1634fi 1635AC_SUBST(ENABLE_ONLINE_UPDATE) 1636 1637dnl =================================================================== 1638dnl Unit Tests 1639dnl =================================================================== 1640AC_MSG_CHECKING([whether to enable unit tests]) 1641if test "$enable_unit_tests" = "yes" -o "$enable_unit_tests" = "TRUE"; then 1642 ENABLE_UNIT_TESTS="YES" 1643 BUILD_TYPE="$BUILD_TYPE GTEST" 1644 AC_MSG_RESULT([yes]) 1645else 1646 ENABLE_UNIT_TESTS="" 1647 AC_MSG_RESULT([no]) 1648fi 1649AC_SUBST(ENABLE_UNIT_TESTS) 1650 1651AC_MSG_CHECKING([whether to enable native CUPS support]) 1652if test "$test_cups" = "yes" -a \( "$enable_cups" = "yes" -o "$enable_cups" = "TRUE" \) ; then 1653 ENABLE_CUPS="TRUE" 1654 AC_MSG_RESULT([yes]) 1655else 1656 ENABLE_CUPS="" 1657 AC_MSG_RESULT([no]) 1658fi 1659AC_SUBST(ENABLE_CUPS) 1660 1661AC_MSG_CHECKING([whether to enable fontconfig support]) 1662if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a \( "$enable_fontconfig" = "yes" -o "$enable_fontconfig" = "TRUE" \); then 1663 ENABLE_FONTCONFIG="TRUE" 1664 AC_MSG_RESULT([yes]) 1665else 1666 ENABLE_FONTCONFIG="" 1667 AC_MSG_RESULT([no]) 1668fi 1669AC_SUBST(ENABLE_FONTCONFIG) 1670 1671dnl =================================================================== 1672dnl find external tarballs. 1673dnl =================================================================== 1674if test -z $TARFILE_LOCATION; then 1675 TARFILE_LOCATION="DEFAULT" 1676fi 1677AC_SUBST(TARFILE_LOCATION) 1678 1679if test -z "$enable_fetch_external" || test "$enable_fetch_external" = "yes" \ 1680 && test -z "$with_system_libs" -a "$with_system_jars" != "no"; then 1681 DO_FETCH_TARBALLS="yes" 1682fi 1683AC_SUBST(DO_FETCH_TARBALLS) 1684 1685if test "$_os" = "WINNT"; then 1686 AC_MSG_CHECKING([whether to use DirectX]) 1687 ENABLE_DIRECT_DRAW="" 1688 if test "$enable_directx" = "yes" -o "$enable_directx" = "TRUE" -o "$enable_directx" = ""; then 1689 ENABLE_DIRECTX="TRUE" 1690 AC_MSG_RESULT([yes]) 1691 else 1692 ENABLE_DIRECTX="" 1693 AC_MSG_RESULT([no]) 1694 fi 1695 AC_SUBST(ENABLE_DIRECTX) 1696 1697 AC_MSG_CHECKING([whether to use ActiveX]) 1698 if test "$enable_activex" = "yes" -o "$enable_activex" = "TRUE" -o "$enable_activex" = ""; then 1699 DISABLE_ACTIVEX="" 1700 AC_MSG_RESULT([yes]) 1701 else 1702 DISABLE_ACTIVEX="TRUE" 1703 AC_MSG_RESULT([no]) 1704 fi 1705 1706 AC_MSG_CHECKING([whether to use ATL]) 1707 if test "$enable_atl" = "yes" -o "$enable_atl" = "TRUE" -o "$enable_atl" = ""; then 1708 DISABLE_ATL="" 1709 AC_MSG_RESULT([yes]) 1710 else 1711 DISABLE_ATL="TRUE" 1712 dnl ActiveX depends on ATL, it should be disabled 1713 DISABLE_ACTIVEX="TRUE" 1714 AC_MSG_RESULT([no]) 1715 fi 1716 1717 AC_SUBST(DISABLE_ATL) 1718 AC_SUBST(DISABLE_ACTIVEX) 1719 1720fi 1721 1722dnl =================================================================== 1723dnl Disable rpath in shared libraries? 1724dnl =================================================================== 1725AC_MSG_CHECKING([whether to use RPATH in shared libraries]) 1726if test "$enable_rpath" = "no"; then 1727 ENABLE_RPATH="no" 1728else 1729 ENABLE_RPATH="yes" 1730fi 1731AC_MSG_RESULT([$ENABLE_RPATH]) 1732AC_SUBST(ENABLE_RPATH) 1733 1734dnl =================================================================== 1735dnl Check extensions to be bundled as literal blobs 1736dnl =================================================================== 1737if test -n "$with_bundled_extension_blobs"; then 1738 BUNDLED_EXTENSION_BLOBS="$with_bundled_extension_blobs" 1739else 1740 BUNDLED_EXTENSION_BLOBS= 1741fi 1742AC_SUBST(BUNDLED_EXTENSION_BLOBS) 1743 1744#dnl =================================================================== 1745#dnl Check extensions that are to be bundled as pre-registered 1746#dnl =================================================================== 1747if test -n "$with_bundled_prereg_extensions"; then 1748 BUNDLED_PREREG_EXTENSIONS="$with_bundled_prereg_extensions" 1749else 1750 BUNDLED_PREREG_EXTENSIONS= 1751fi 1752AC_SUBST(BUNDLED_PREREG_EXTENSIONS) 1753 1754dnl =================================================================== 1755dnl Configure system provided dictionary/hyphenation/thesaurus 1756dnl =================================================================== 1757 AC_MSG_CHECKING([whether to use dicts from external paths]) 1758 if test -n "$with_system_dicts" -a "$with_system_dicts" = "yes"; then 1759 AC_MSG_RESULT([yes]) 1760 SYSTEM_DICTS=YES 1761 AC_MSG_CHECKING([for spelling dictionary directory]) 1762 if test -n "$with_external_dict_dir"; then 1763 DICT_SYSTEM_DIR=file://$with_external_dict_dir 1764 else 1765 DICT_SYSTEM_DIR=file:///usr/share/hunspell 1766 fi 1767 AC_MSG_RESULT([$DICT_SYSTEM_DIR]) 1768 AC_MSG_CHECKING([for hyphenation patterns directory]) 1769 if test -n "$with_external_hyph_dir"; then 1770 HYPH_SYSTEM_DIR=file://$with_external_hyph_dir 1771 else 1772 HYPH_SYSTEM_DIR=file:///usr/share/hyphen 1773 fi 1774 AC_MSG_RESULT([$HYPH_SYSTEM_DIR]) 1775 AC_MSG_CHECKING([for thesaurus directory]) 1776 if test -n "$with_external_thes_dir"; then 1777 THES_SYSTEM_DIR=file://$with_external_thes_dir 1778 else 1779 THES_SYSTEM_DIR=file:///usr/share/mythes 1780 fi 1781 AC_MSG_RESULT([$THES_SYSTEM_DIR]) 1782 else 1783 AC_MSG_RESULT([no]) 1784 SYSTEM_DICTS=NO 1785 fi 1786AC_SUBST(SYSTEM_DICTS) 1787AC_SUBST(DICT_SYSTEM_DIR) 1788AC_SUBST(HYPH_SYSTEM_DIR) 1789AC_SUBST(THES_SYSTEM_DIR) 1790 1791if test $_os = "WINNT"; then 1792 AC_MSG_CHECKING([Windows build environment sanity]) 1793 dnl =================================================================== 1794 dnl Sanity check! Native Windows programs cannot use cygwin symlinks! 1795 dnl =================================================================== 1796 dnl As long as awk instead of $AWK is used somewhere in the sources, 1797 dnl check for $AWK and awk. $AWK is pointing to gawk in cygwin. 1798 dnl Quoted: either side can be a path with a space in it, and an 1799 dnl unquoted one splits into "test: too many arguments" here. 1800 if test -L "$AWK" -o -L "`which awk`" ; then 1801 AC_MSG_ERROR([$AWK / awk is a cygwin symlink! 1802Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1803link, and copy the program to the name of the link.]) 1804 fi 1805 if test -L `which tar` ; then 1806 AC_MSG_ERROR([tar is a cygwin symlink! 1807Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1808link, and copy the program to the name of the link.]) 1809 fi 1810 if test -L `which gunzip` ; then 1811 AC_MSG_ERROR([gunzip is a cygwin symlink! 1812Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1813link, and copy the program to the name of the link.]) 1814 fi 1815 dnl =================================================================== 1816 dnl Another sanity check! More a band-aid. winenv.* adds guw.exe to 1817 dnl CC and CXX but the configure checks here assume that guw.exe 1818 dnl (if needed at all) is not yet present. 1819 dnl =================================================================== 1820 CC=`echo $CC | $SED "s/^guw.exe //"` 1821 CXX=`echo $CXX | $SED "s/^guw.exe //"` 1822 dnl =================================================================== 1823 dnl If $CC is set to a MinGW compiler, e.g. "gcc -mno-cygwin" enable 1824 dnl $WITH_MINGWIN 1825 dnl =================================================================== 1826 if test -n "$CC";then 1827 if test "`$CC -dumpmachine 2>/dev/null | $SED -e 's/^.*-//'`" = "mingw32"; then 1828 WITH_MINGWIN="yes" 1829 fi 1830 fi 1831 dnl =================================================================== 1832 if test "$WITH_MINGWIN" = "yes" ; then 1833 if test -z "$CC"; then 1834 CC="gcc -mno-cygwin" 1835 CXX="g++ -mno-cygwin" 1836 fi 1837 fi 1838 AC_MSG_RESULT([ok]) 1839fi 1840AC_SUBST(WITH_MINGWIN) 1841 1842dnl =================================================================== 1843dnl Extra check for Windows. cygwin builds need gcc to build dmake 1844dnl and g++ to build guw.exe although MS cl (or MinGW) is used to 1845dnl build AOO. 1846dnl =================================================================== 1847if test "$_os" = "WINNT" ; then 1848 AC_MSG_CHECKING([for cygwin gcc/g++]) 1849 if which gcc > /dev/null && which g++ > /dev/null ; then 1850 AC_MSG_RESULT([found]) 1851 else 1852 AC_MSG_ERROR([cygwin gcc and g++ are needed, please install them.]) 1853 fi 1854fi 1855 1856 1857dnl =================================================================== 1858dnl Check whether the bash shell can be used. 1859dnl =================================================================== 1860AC_PATH_PROG(SHELLPATH, bash) 1861if test -z "$SHELLPATH"; then 1862 AC_MSG_ERROR([bash not found in \$PATH]) 1863else 1864 SHELLPATH=`echo $SHELLPATH | $SED -n "s/\/bash$//p"` 1865fi 1866AC_SUBST(SHELLPATH) 1867 1868dnl =================================================================== 1869dnl Checks for c compiler, 1870dnl The check for the c++ compiler is later on. 1871dnl =================================================================== 1872AC_MSG_CHECKING([gcc home]) 1873if test -z "$with_gcc_home"; then 1874 GCC_HOME=`which gcc | $SED -e s,/bin/gcc,,` 1875else 1876 GCC_HOME="$with_gcc_home" 1877fi 1878AC_MSG_RESULT($GCC_HOME) 1879AC_SUBST(GCC_HOME) 1880 1881save_CC=$CC 1882save_CXX=$CXX 1883 1884if test -n "$with_gcc_home"; then 1885 if test -z "$CC"; then 1886 CC="$with_gcc_home/bin/gcc" 1887 fi 1888fi 1889 1890dnl The following checks for gcc, cc and then cl (if it weren't guarded for win32) 1891if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 1892 AC_PROG_CC 1893fi 1894 1895dnl Newer autoconf (>= 2.70) probes for the highest C standard the compiler 1896dnl accepts and appends it (e.g. -std=gnu23) to $CC. That breaks bundled 1897dnl module configure scripts (nss/nspr, ...) which pass CC=$(CC) unquoted as 1898dnl an inline environment assignment: the embedded space makes the shell 1899dnl treat -std=gnu23 as a command ("-std=gnu23: command not found"). We pin 1900dnl the C dialect per-module in solenv/inc/*.mk anyway, so strip the appended 1901dnl -std= token and keep $CC a single bare compiler word. 1902CC=`echo "$CC" | $SED 's/ -std=[[^ ]]*//g'` 1903 1904COMPATH=`dirname "$CC"` 1905if test "$COMPATH" = "." ; then 1906 AC_PATH_PROGS(COMPATH, $CC) 1907 dnl double square bracket to get single because of M4 quote... 1908 COMPATH=`echo $COMPATH | $SED "s@/[[^/:]]*\\\$@@"`; 1909fi 1910CC_PATH="$COMPATH/" 1911COMPATH=`echo $COMPATH | $SED "s@/[[Bb]][[Ii]][[Nn]]\\\$@@"`; 1912 1913dnl =================================================================== 1914dnl Test the gcc version, 3 is OK 1915dnl =================================================================== 1916GCCVER=20995 1917if test \( "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes" \) -a "$GCC" = "yes"; then 1918 AC_MSG_CHECKING([the GNU gcc compiler version]) 1919 _gcc_version=`$CC -dumpversion` 1920 _gcc_major=`echo $_gcc_version | $AWK -F. '{ print \$1 }'` 1921 GCCVER=`echo $_gcc_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 1922 1923 if test "$_gcc_major" -lt "3"; then 1924 AC_MSG_ERROR([found version "$_gcc_version", use version 3+ of the gcc compiler]) 1925 else 1926 if test "$GCCVER" -eq "030203"; then 1927 if test "$ENABLE_SYMBOLS" = "SMALL"; then 1928 AC_MSG_ERROR([version "$_gcc_version" gives internal error with small.]) 1929 fi 1930 fi 1931 fi 1932 if test "$_os" = "Darwin" ; then 1933 AC_MSG_RESULT([implicitly using CC=$CC]) 1934 else 1935 AC_MSG_RESULT([checked (gcc $_gcc_version)]) 1936 fi 1937 if test "$_os" = "SunOS"; then 1938 AC_MSG_CHECKING([gcc linker]) 1939 if $CC -Wl,--version 2>&1 |head -n 1| $GREP -v GNU > /dev/null;then 1940 AC_MSG_ERROR([failed (not GNU ld). Use GNU ld instead of Sun ld on Solaris]) 1941 fi 1942 AC_MSG_RESULT([ok (GNU ld)]) 1943 fi 1944fi 1945AC_SUBST(GCCVER) 1946 1947HAVE_LD_BSYMBOLIC_FUNCTIONS= 1948if test "$GCC" = "yes"; then 1949 AC_MSG_CHECKING( for -Bsymbolic-functions linker support ) 1950 bsymbolic_functions_ldflags_save=$LDFLAGS 1951 LDFLAGS="$LDFLAGS -Wl,-Bsymbolic-functions -Wl,--dynamic-list-cpp-new -Wl,--dynamic-list-cpp-typeinfo" 1952 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 1953 #include <stdio.h> 1954 ],[ 1955 printf ("hello world\n"); 1956 ])], HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE, []) 1957 if test "z$HAVE_LD_BSYMBOLIC_FUNCTIONS" = "zTRUE"; then 1958 AC_MSG_RESULT( found ) 1959 else 1960 AC_MSG_RESULT( not found ) 1961 fi 1962 LDFLAGS=$bsymbolic_functions_ldflags_save 1963fi 1964AC_SUBST(HAVE_LD_BSYMBOLIC_FUNCTIONS) 1965 1966dnl =================================================================== 1967dnl Set the ENABLE_PCH variable. (Activate --enable-pch) 1968dnl =================================================================== 1969AC_MSG_CHECKING([whether to enable pch feature]) 1970if test -n "$enable_pch" && test "$enable_pch" != "no"; then 1971 if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 1972 ENABLE_PCH="TRUE" 1973 AC_MSG_RESULT([yes]) 1974dnl There is no PCH support in GCC versions prior to this 1975 elif test "$GCC" = "yes" -a "$GCCVER" -gt "030400"; then 1976 ENABLE_PCH="TRUE" 1977 AC_MSG_RESULT([yes]) 1978 else 1979 ENABLE_PCH="" 1980 AC_MSG_WARN([Precompiled header not yet supported for your platform/compiler]) 1981 fi 1982else 1983 ENABLE_PCH="" 1984 AC_MSG_RESULT([no]) 1985fi 1986AC_SUBST(ENABLE_PCH) 1987 1988dnl =================================================================== 1989dnl Search all the common names for GNU make 1990dnl =================================================================== 1991AC_MSG_CHECKING([for GNU make]) 1992for a in "$MAKE" "$GNUMAKE" make gmake gnumake; do 1993 $a --version 2> /dev/null | $GREP GNU 2>&1 > /dev/null 1994 if test $? -eq 0; then 1995 GNUMAKE=$a 1996 break 1997 fi 1998done 1999AC_MSG_RESULT($GNUMAKE) 2000if test -z "$GNUMAKE"; then 2001 AC_MSG_ERROR([not found. install GNU make.]) 2002fi 2003 2004AC_MSG_CHECKING([the GNU make version]) 2005_make_version=`$GNUMAKE --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 2006_make_longver=`echo $_make_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 2007if test "$_make_longver" -ge "038100" ; then 2008 AC_MSG_RESULT([$GNUMAKE $_make_version]) 2009else 2010 AC_MSG_ERROR([failed ($GNUMAKE version >= 3.81 needed]) 2011fi 2012AC_SUBST(GNUMAKE) 2013 2014dnl =================================================================== 2015dnl Search for a pre-installed dmake 2016dnl =================================================================== 2017AC_MSG_CHECKING([for dmake]) 2018DMAKE="no" 2019# Override system dmake if --with-dmake-path or --with-dmake-url is used. 2020if test -z "$with_dmake_path" && test -z "$with_dmake_url"; then 2021 AC_PATH_PROG(DMAKE, dmake, no) 2022 IS_SYSTEM_DMAKE=NO 2023 if test "$DMAKE" != "no"; then 2024 AC_MSG_RESULT([using system dmake]) 2025 DMAKE_PATH="$DMAKE" 2026 IS_SYSTEM_DMAKE=YES 2027 fi 2028elif test -n "$with_dmake_path" ; then 2029 # Did not find pre-installed dmake. 2030 # Is it at a nonstandard location provided by --with-dmake-path ? 2031 AC_MSG_NOTICE([looking for dmake at $DMAKE_PATH]) 2032 if test -x "$with_dmake_path" ; then 2033 AC_MSG_RESULT([using user provided dmake]) 2034 DMAKE=$with_dmake_path 2035 fi 2036fi 2037 2038DMAKE_URL= 2039if test "$DMAKE" = "no"; then 2040 AC_MSG_NOTICE([no system or user-provided dmake found]) 2041 # Check if a URL was supplied from which we can download the source and compile it. 2042 if test -n "$with_dmake_url" ; then 2043 # At this moment we can not verify the URL or the content that we want to download. 2044 # Neither can we apply the test below for ruling out that it is the SunStudio dmake. 2045 DMAKE_URL=$with_dmake_url 2046 AC_MSG_RESULT([dmake will be downloaded and compiled in bootstrap]) 2047 DMAKE= 2048 BUILD_DMAKE=YES 2049 else 2050 AC_MSG_ERROR([no URL for dmake source code specified, either. Use --with-dmake-url to supply an URL; run configure with the --help option for a list of possible URLs.]) 2051 fi 2052else 2053 AC_MSG_CHECKING([whether the found dmake is the right dmake]) 2054 # we need to find out whether that dmake we found is "our" dmake 2055 # or the dmake from Sun's SunStudio Compiler which is something 2056 # different 2057 # This test _should_ work because the one accepts -V (ours) and one 2058 # (the other) not... 2059 $DMAKE -V 2>/dev/null | $GREP -E 'dmake(.exe)? .* Version .*' >/dev/null 2060 if test $? -eq 0; then 2061 BUILD_DMAKE=NO 2062 AC_MSG_RESULT([yes]) 2063 AC_MSG_CHECKING([the dmake version]) 2064 DMAKE_VERSION=`$DMAKE -V | $AWK '$3 == "Version" {print $4}'` 2065 if test "`echo $DMAKE_VERSION | cut -d'.' -f1`" -gt "4"; then 2066 AC_MSG_RESULT([OK, >= 4.11]) 2067 elif test "`echo $DMAKE_VERSION | cut -d'.' -f1`" = "4" && \ 2068 test "`echo $DMAKE_VERSION | cut -d'.' -f2`" -ge "11"; then 2069 AC_MSG_RESULT([OK, >= 4.11]) 2070 else 2071 AC_MSG_ERROR([too old. >= 4.11 is needed]) 2072 DMAKE=no 2073 fi 2074 else 2075 AC_MSG_WARN([no]) 2076 DMAKE=no 2077 fi 2078fi 2079if test "$DMAKE" = "no"; then 2080 AC_MSG_ERROR([please use --with-dmake-path or --with-dmake-url to specify dmake executable or source]) 2081fi 2082AC_SUBST(DMAKE_URL) 2083AC_SUBST(BUILD_DMAKE) 2084AC_SUBST(DMAKE_PATH) 2085AC_SUBST(IS_SYSTEM_DMAKE) 2086 2087 2088dnl =================================================================== 2089dnl Search all the common names for GNU or BSD tar 2090dnl =================================================================== 2091AC_MSG_CHECKING([for GNU or compatible BSD tar]) 2092for a in $GNUTAR gtar gnutar bsdtar tar; do 2093 $a --version 2> /dev/null | $EGREP "GNU|libarchive" 2>&1 > /dev/null 2094 if test $? -eq 0; then 2095 GNUTAR=$a 2096 break 2097 fi 2098done 2099AC_MSG_RESULT($GNUTAR) 2100if test -z "$GNUTAR"; then 2101 AC_MSG_ERROR([not found. install GNU tar.]) 2102fi 2103 2104AC_SUBST(GNUTAR) 2105 2106dnl =================================================================== 2107dnl Search for xz, needed to unpack .tar.xz external dependency tarballs 2108dnl =================================================================== 2109AC_MSG_CHECKING([for xz]) 2110for a in $XZ xz; do 2111 $a --version 2> /dev/null > /dev/null 2112 if test $? -eq 0; then 2113 XZ=$a 2114 break 2115 fi 2116done 2117if test -z "$XZ"; then 2118 AC_MSG_RESULT([not found]) 2119 AC_MSG_WARN([xz not found - building with a .tar.xz external dependency will fail. Install xz-utils.]) 2120 echo "xz not found - building with a .tar.xz external dependency will fail. Install xz-utils." >> warn 2121else 2122 AC_MSG_RESULT($XZ) 2123fi 2124AC_SUBST(XZ) 2125 2126dnl =================================================================== 2127dnl Test the solaris compiler version 2128dnl =================================================================== 2129if test "$_os" = "SunOS"; then 2130 if test "$CC" = "cc"; then 2131 AC_PATH_PROGS(_cc, cc) 2132 COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"` 2133 AC_MSG_CHECKING([the SunStudio C/C++ compiler version]) 2134 dnl cc -V outputs to standard error!!!! 2135 _sunstudio_string=`$CC -V 2>&1 | $GREP '^cc' | sed -e 's/.* C //'` 2136 _sunstudio_version=`echo $_sunstudio_string | $AWK '{ print $1 }'` 2137 _sunstudio_major=`echo $_sunstudio_version | $AWK -F. '{ print $1 }'` 2138 if test "$_sunstudio_major" != "5"; then 2139 AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler]) 2140 else 2141 _sunstudio_minor=`echo $_sunstudio_version | $AWK -F. '{ if ($2 == 5) print "true"; else if ($2 == 7) print "true"; else if ($2 == 8) print "true"; else if ($2 == 9) print "true"; else print "false" }'` 2142 if test "$_sunstudio_minor" = "false"; then 2143 AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler]) 2144 else 2145 dnl compiler will do 2146 AC_MSG_RESULT([checked]) 2147 fi 2148 fi 2149 fi 2150fi 2151 2152if test "$GCC" = "yes"; then 2153 AC_MSG_CHECKING( for --hash-style=both linker support ) 2154 hash_style_ldflags_save=$LDFLAGS 2155 LDFLAGS="$LDFLAGS -Wl,--hash-style=both" 2156 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 2157 #include <stdio.h> 2158 ],[ 2159 printf ("hello world\n"); 2160 ])], HAVE_LD_HASH_STYLE=TRUE, HAVE_LD_HASH_STYLE=FALSE) 2161 if test "z$HAVE_LD_HASH_STYLE" = "zTRUE"; then 2162 AC_MSG_RESULT( found ) 2163 else 2164 AC_MSG_RESULT( not found ) 2165 fi 2166 LDFLAGS=$hash_style_ldflags_save 2167fi 2168AC_SUBST(HAVE_LD_HASH_STYLE) 2169 2170dnl =================================================================== 2171dnl Test the Compaq compiler for OSF1 2172dnl =================================================================== 2173if test "$_os" = "OSF1"; then 2174 if test "$CC" = "cc"; then 2175 AC_PATH_PROGS(_cc, cc) 2176 COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"` 2177 AC_MSG_WARN([******* $_cc , $COMPATH]) 2178 AC_MSG_CHECKING([the Compaq C compiler version]) 2179 dnl cc -V outputs to standard error!!!! 2180 _compaqc_version=`$CC -V 2>&1 | $AWK '{ print $3 }'` 2181 _compaqc_major=`echo $_compaqc_version | $AWK -F. '{ print $1 }'` 2182 if test "$_compaqc_major" != "T6"; then 2183 AC_MSG_ERROR([found version "$_compaqc_version", use version 6 of the Compaq C compiler]) 2184 else 2185 dnl compiler will do 2186 AC_MSG_RESULT([checked]) 2187 fi 2188 fi 2189fi 2190 2191dnl =================================================================== 2192dnl Check whether there's a Perl version available. 2193dnl =================================================================== 2194if test -z "$with_perl_home"; then 2195 AC_PATH_PROG(PERL, perl) 2196else 2197 if test "$_os" = "WINNT"; then 2198 with_perl_home=`cygpath -u "$with_perl_home"` 2199 fi 2200 _perl_path="$with_perl_home/bin/perl" 2201 if test -x "$_perl_path"; then 2202 PERL=$_perl_path 2203 else 2204 AC_MSG_ERROR([$_perl_path not found]) 2205 fi 2206fi 2207 2208dnl =================================================================== 2209dnl Testing for Perl version 5 or greater. 2210dnl $] is the perl version variable, it is returned as an integer 2211dnl =================================================================== 2212if test "$PERL"; then 2213 AC_MSG_CHECKING([the Perl version]) 2214 ${PERL} -e "exit($]);" 2215 _perl_version=$? 2216 if test "$_perl_version" -lt 5; then 2217 AC_MSG_ERROR([found Perl version "$_perl_version", use version 5 of Perl]) 2218 fi 2219 AC_MSG_RESULT([checked (perl $_perl_version)]) 2220else 2221 AC_MSG_ERROR([Perl not found, install version 5 of Perl]) 2222fi 2223AC_SUBST(PERL) 2224 2225dnl =================================================================== 2226dnl Testing for required Perl modules 2227dnl The list of required Perl modules is documented here: 2228dnl https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO#General_Build_Requirements 2229dnl =================================================================== 2230AC_MSG_CHECKING([for required Perl modules]) 2231if `$PERL -e 'use Archive::Zip; 2232 use LWP::UserAgent; 2233 use XML::Parser; 2234 use Digest::SHA; 2235 use Digest::MD5; 2236 use LWP::Protocol::https;'>/dev/null 2>&1`; then 2237 AC_MSG_RESULT([all modules found]) 2238else 2239 # Find out which modules are missing. 2240 missing_perl_modules= 2241 if ! `$PERL -e 'use Archive::Zip;'>/dev/null 2>&1`; then 2242 missing_perl_modules=Archive::Zip 2243 fi 2244 if ! `$PERL -e 'use LWP::UserAgent;'>/dev/null 2>&1`; then 2245 missing_perl_modules="$missing_perl_modules LWP::UserAgent" 2246 fi 2247 if ! `$PERL -e 'use XML::Parser;'>/dev/null 2>&1`; then 2248 missing_perl_modules="$missing_perl_modules XML::Parser" 2249 fi 2250 if ! `$PERL -e 'use Digest::SHA;'>/dev/null 2>&1`; then 2251 missing_perl_modules="$missing_perl_modules Digest::SHA" 2252 fi 2253 if ! `$PERL -e 'use Digest::MD5;'>/dev/null 2>&1`; then 2254 missing_perl_modules="$missing_perl_modules Digest::MD5" 2255 fi 2256 if ! `$PERL -e 'use LWP::Protocol::https;'>/dev/null 2>&1`; then 2257 missing_perl_modules="$missing_perl_modules LWP::Protocol::https" 2258 fi 2259 AC_MSG_ERROR([ 2260 The missing Perl modules are: $missing_perl_modules 2261 Install them as superuser/administrator with "cpan -i $missing_perl_modules"]) 2262fi 2263 2264dnl =================================================================== 2265dnl Check which Microsoft C/C++ or MinGW compiler is used for WINNT 2266dnl =================================================================== 2267if test "$_os" = "WINNT"; then 2268 if test "$WITH_MINGWIN" != "yes"; then 2269 AC_MSG_CHECKING([for friendly registry keys]) 2270 # VS.Net 2003, VS.Net 2005 2271 if test -z "$with_cl_home"; then 2272 vctest=`$OOWINTOOL --msvc-productdir`; 2273 if test -x "$vctest/bin/cl.exe"; then 2274 with_cl_home=$vctest; 2275 fi 2276 else 2277 with_cl_home=`cygpath -u "$with_cl_home"` 2278 fi 2279 AC_MSG_RESULT([done]) 2280 2281 dnl =========================================================== 2282 dnl Which MSVC layout is --with-cl-home pointing at? 2283 dnl =========================================================== 2284 dnl VS2008 (VC9) keeps cl.exe in VC/bin and its debug-info server 2285 dnl (mspdb80.dll) somewhere else entirely -- Common7/IDE, or the 2286 dnl Windows SDK's own bin. From VS2015 on the toolset is versioned, 2287 dnl self-contained and reached as 2288 dnl VC/Tools/MSVC/<toolset>/bin/Host<host>/<target>/cl.exe 2289 dnl with its headers in <toolset>/include, its import libraries in 2290 dnl <toolset>/lib/<target>, and mspdb140.dll next to cl.exe. 2291 dnl Detecting the layout here lets the mspdb hunt and the VC/bin 2292 dnl logic below stay exactly as they were for VC9. 2293 MSVC_MODERN= 2294 if test -d "$with_cl_home/bin/Hostx86" -o -d "$with_cl_home/bin/Hostx64"; then 2295 MSVC_MODERN="TRUE" 2296 fi 2297 2298 dnl =========================================================== 2299 dnl Check for mspdb71.dll/mspdb80.dll 2300 dnl =========================================================== 2301 dnl VC9 and older only: a modern toolset ships its mspdb*.dll in the 2302 dnl same directory as cl.exe, which the compile actions already have 2303 dnl on PATH. 2304 if test -z "$MSVC_MODERN"; then 2305 dnl .NET 2003/5/8 Compiler 2306 if test -n "$with_mspdb_path";then 2307 with_mspdb_path=`cygpath -u "$with_mspdb_path"` 2308 fi 2309 if test -e "$with_mspdb_path/mspdb71.dll" -o -e "$with_mspdb_path/mspdb80.dll"; then 2310 MSPDB_PATH="$with_mspdb_path" 2311 fi 2312 dnl .NET 2003 case 2313 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb71.dll"; then 2314 MSPDB_PATH="$with_cl_home/../Common7/IDE" 2315 fi 2316 dnl .NET 2005/2008 case 2317 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb80.dll"; then 2318 MSPDB_PATH="$with_cl_home/../Common7/IDE" 2319 fi 2320 dnl Windows SDK 6.0 case 2321 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/bin/mspdb80.dll"; then 2322 MSPDB_PATH="$with_cl_home/bin" 2323 fi 2324 2325 if test -z "$MSPDB_PATH";then 2326 dnl AC_PATH_PROG only checks if MSPDB_PATH is still empty 2327 AC_PATH_PROG(MSPDB_PATH, mspdb80.dll) 2328 AC_PATH_PROG(MSPDB_PATH, mspdb71.dll) 2329 MSPDB_PATH=`dirname "$MSPDB_PATH"` 2330 fi 2331 2332 if test -z "$MSPDB_PATH"; then 2333 AC_MSG_ERROR([You need a mspdb71.dll/mspdb80.dll, make sure it's in the path or use --with-mspdb-path]) 2334 fi 2335 MSPDB_PATH=`cygpath -d "$MSPDB_PATH"` 2336 MSPDB_PATH=`cygpath -u "$MSPDB_PATH"` 2337 dnl The path needs to be added before cl is called 2338 PATH="$MSPDB_PATH:$PATH" 2339 fi 2340 2341 AC_MSG_CHECKING([the Microsoft C/C++ Compiler]) 2342 dnl A modern toolset splits bin/ by HOST and then by TARGET, so the 2343 dnl cross compiler is a directory rather than VC9's "bin/amd64" 2344 dnl suffix. Prefer a Hostx64 tree when one exists: the x64-hosted 2345 dnl compiler is not confined to a 2GB address space, which matters 2346 dnl on the larger translation units in this tree. 2347 if test -n "$MSVC_MODERN"; then 2348 if test -d "$with_cl_home/bin/Hostx64"; then 2349 cl_host="Hostx64" 2350 else 2351 cl_host="Hostx86" 2352 fi 2353 case "$build_cpu" in 2354 i?86) 2355 cl_subdirectory="bin/$cl_host/x86" 2356 ;; 2357 x86_64) 2358 if test "$BUILD_WIN64" = "TRUE" ; then 2359 cl_subdirectory="bin/$cl_host/x64" 2360 else 2361 cl_subdirectory="bin/$cl_host/x86" 2362 fi 2363 ;; 2364 *) 2365 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2366 ;; 2367 esac 2368 else 2369 case "$build_cpu" in 2370 i?86) 2371 cl_subdirectory="bin" 2372 ;; 2373 x86_64) 2374 if test "$BUILD_WIN64" = "TRUE" ; then 2375 cl_subdirectory="bin/amd64" 2376 else 2377 cl_subdirectory="bin" 2378 fi 2379 ;; 2380 *) 2381 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2382 ;; 2383 esac 2384 fi 2385 if test -x "$with_cl_home/$cl_subdirectory/cl.exe"; then 2386 CC="$with_cl_home/$cl_subdirectory/cl.exe" 2387 COMPATH="$with_cl_home" 2388 # This gives us a posix path with 8.3 filename restrictions 2389 CC=`cygpath -d "$CC"` 2390 CC=`cygpath -u "$CC"` 2391 COMPATH=`cygpath -d "$COMPATH"` 2392 COMPATH=`cygpath -u "$COMPATH"` 2393 # Remove /cl.exe from CC case insensitive 2394 AC_MSG_RESULT([found ($CC)]) 2395 dnl VC9 spells it VC/Include, a modern toolset spells it 2396 dnl <toolset>/include. NTFS is case-insensitive so either 2397 dnl name resolves, but only one of the two directories exists. 2398 if test -n "$MSVC_MODERN"; then 2399 export INCLUDE=`cygpath -d "$COMPATH/include"` 2400 else 2401 export INCLUDE=`cygpath -d "$COMPATH/Include"` 2402 fi 2403 dnl Check which Microsoft C/C++ compiler is found 2404 AC_MSG_CHECKING([the Version of Microsoft C/C++ Compiler]) 2405dnl The following find microsoft, matches nn.nn.nnnn then pulls numbers out. 2406 CCTXTVER=`$CC 2>&1 | head -n1` 2407 CCNUMVER=`echo $CCTXTVER | $AWK "/Microsoft/ && /..\\...\\...../ { 2408 x = match( \\\$0, /..\\...\\...../ ) 2409 CCversion = substr( \\\$0, RSTART, RLENGTH) 2410 tokencount = split (CCversion,vertoken,\".\") 2411 for ( i = 1 ; i <= tokencount ; i++ ) { 2412 printf (\"%04d\",vertoken[[i]] ) 2413 } 2414 }"` 2415 AC_MSG_RESULT([found Compiler version $CCNUMVER in "$CCTXTVER"]) 2416 dnl COMEX names the compiler generation the rest of the build 2417 dnl switches on: it selects solenv/inc/wntmsci<COMEX>.mk, the 2418 dnl CVER define, and the wntmsci<COMEX> output tree. 14 is the 2419 dnl UCRT generation -- VS2015 (cl 19.00) and everything since, 2420 dnl which share one CRT and one SDK layout. There is 2421 dnl deliberately no value per Visual Studio release: nothing in 2422 dnl this tree distinguishes VS2017 from VS2022. 2423 if test "$CCNUMVER" -ge "001900000000"; then 2424 COMEX=14 2425 MSVSVER=2015 2426 AC_MSG_RESULT([found a UCRT-generation compiler (VS2015 or newer).]) 2427 if test -z "$MSVC_MODERN"; then 2428 AC_MSG_ERROR([cl.exe reports version $CCNUMVER, i.e. VS2015 or newer, but $with_cl_home has no bin/Host* layout. Point --with-cl-home at the versioned toolset directory, e.g. .../VC/Tools/MSVC/14.29.30133]) 2429 fi 2430 elif test "$CCNUMVER" -ge "001500000000"; then 2431 COMEX=12 2432 MSVSVER=2008 2433 AC_MSG_RESULT([found .NET 2008 / VS 9.0.]) 2434 if test -n "$MSVC_MODERN"; then 2435 AC_MSG_ERROR([$with_cl_home has a modern bin/Host* layout but its cl.exe reports version $CCNUMVER. Refusing to guess which of the two it is.]) 2436 fi 2437 else 2438 AC_MSG_ERROR([Compiler too old. Use Microsoft C/C++ .NET 2008, or a VS2015-or-newer toolset.]) 2439 fi 2440 else 2441 AC_MSG_ERROR([Microsoft C/C++ Compiler not found. Use --with-cl-home.]) 2442 fi 2443 else 2444 AC_MSG_CHECKING([the Mingwin32 C++ Compiler]) 2445 if test `$CC -dumpmachine | $SED -e 's/^.*-//'` = "mingw32"; then 2446 AC_MSG_RESULT([found.]) 2447 if $CC -dumpspecs | $GREP -q "mno-cygwin"; then 2448 USE_MINGW="cygwin" 2449 else 2450 USE_MINGW="pure-mingw" 2451 fi 2452 else 2453 AC_MSG_ERROR([Mingwin32 C++ Compiler not found.]) 2454 fi 2455 fi 2456fi 2457AC_SUBST(COMEX) 2458AC_SUBST(MSPDB_PATH) 2459AC_SUBST(MSVC_MODERN) 2460AC_SUBST(USE_MINGW) 2461 2462dnl =================================================================== 2463dnl The CLI/.NET language binding, and whether it can be built at all 2464dnl =================================================================== 2465dnl cli_ure, the .NET language binding. It was written in Managed 2466dnl Extensions for C++ -- __gc, S"...", __pin -- which needs /clr:oldSyntax, 2467dnl and that switch was removed after VS2015; it is now C++/CLI and builds 2468dnl with either compiler generation. 2469dnl 2470dnl It is still optional, because it wants a .NET SDK: csc.exe to compile the 2471dnl C# half and mscoree.lib to link the C++ half. --disable-cli is for a 2472dnl Windows box that has a compiler but no SDK. 2473dnl 2474dnl One variable rather than a test in each consumer: the module makefiles, 2475dnl the SDK's file lists and its checker all need the same answer, and they 2476dnl should not each rediscover it. 2477AC_ARG_ENABLE(cli, 2478[ --disable-cli Do not build the CLI (.NET) language binding. It 2479 needs a .NET SDK -- csc.exe and mscoree.lib -- which 2480 a Windows machine need not have. 2481],,) 2482DISABLE_CLI= 2483if test "$_os" != "WINNT" -o "$enable_cli" = "no" ; then 2484 DISABLE_CLI="TRUE" 2485fi 2486if test "$_os" = "WINNT" ; then 2487 AC_MSG_CHECKING([whether to build the CLI language binding]) 2488 if test -z "$DISABLE_CLI" ; then 2489 AC_MSG_RESULT([yes]) 2490 else 2491 AC_MSG_RESULT([no, --disable-cli]) 2492 fi 2493fi 2494AC_SUBST(DISABLE_CLI) 2495 2496dnl =================================================================== 2497dnl A host Python, for building the bundled one on Windows 2498dnl =================================================================== 2499dnl Python 3's PCbuild runs generator scripts under an ALREADY EXISTING 2500dnl Python. Its find_python.bat probes only "py -3.10" and "py -3.9" 2501dnl and then falls back to downloading a private copy through nuget, 2502dnl which an offline build cannot do. HOST_PYTHON is the environment 2503dnl variable that batch file checks before any of that, so naming one 2504dnl here keeps the build off the network. 2505dnl AOO_CHECK_HOST_PYTHON(candidate) 2506dnl 2507dnl Sets HOST_PYTHON to the Windows form of $1 when it is a NATIVE Windows 2508dnl Python 3.9 or newer, and leaves it empty otherwise. 2509dnl 2510dnl os.name is the whole point of the test. A cygwin Python passes the 2511dnl version check and is still the wrong tool: it reads the native paths 2512dnl PCbuild hands it -- C:\foo\bar -- as RELATIVE, and prepends its own 2513dnl working directory, so deepfreeze.py dies on a path with a drive letter 2514dnl in the middle of it. 2515AC_DEFUN([AOO_CHECK_HOST_PYTHON], [ 2516 _pycand="$1" 2517 dnl cygwin's which reports the name without the .exe that Windows needs 2518 if test -f "$_pycand.exe"; then 2519 _pycand="$_pycand.exe" 2520 fi 2521 if "$_pycand" -Ec "import os, sys; assert os.name == 'nt'; assert sys.version_info[[:2]] >= (3, 9)" >/dev/null 2>&1; then 2522 HOST_PYTHON=`cygpath -m "$_pycand"` 2523 fi 2524]) 2525 2526HOST_PYTHON= 2527if test \( "$_os" = "WINNT" \) -a \( -n "$MSVC_MODERN" \) -a \( "$SYSTEM_PYTHON" != "YES" \) ; then 2528 AC_MSG_CHECKING([for a host Python to build the bundled Python with]) 2529 if test -n "$with_host_python"; then 2530 AOO_CHECK_HOST_PYTHON([$with_host_python]) 2531 if test -z "$HOST_PYTHON"; then 2532 AC_MSG_ERROR([--with-host-python=$with_host_python is not a native Windows Python 3.9 or newer]) 2533 fi 2534 else 2535 dnl which -a, not which: cygwin's own python comes first on PATH and 2536 dnl is not usable here, so the search has to see past it. 2537 for _pypath in `which -a python3 python py 2>/dev/null`; do 2538 AOO_CHECK_HOST_PYTHON([$_pypath]) 2539 if test -n "$HOST_PYTHON"; then 2540 break 2541 fi 2542 done 2543 fi 2544 if test -z "$HOST_PYTHON"; then 2545 AC_MSG_ERROR([no Python 3.9 or newer found. PCbuild needs one to build the bundled Python; pass --with-host-python=<path to python.exe>]) 2546 fi 2547 AC_MSG_RESULT([$HOST_PYTHON]) 2548fi 2549AC_SUBST(HOST_PYTHON) 2550 2551dnl =================================================================== 2552dnl The Windows 10 SDK, for a UCRT-generation toolset 2553dnl =================================================================== 2554dnl This sits here, immediately after the compiler, rather than next to 2555dnl the Platform SDK check far below, because the SDK now supplies 2556dnl midl.exe and the Windows Installer tools -- and the .NET/midl hunt 2557dnl is only a few lines further down. 2558if test \( "$_os" = "WINNT" \) -a \( -n "$MSVC_MODERN" \) ; then 2559 dnl ===================================================================== 2560 dnl A UCRT-generation toolset is paired with the Windows 10/11 SDK, 2561 dnl whose layout is genuinely different rather than merely renamed. 2562 dnl Platform SDK v7.0 has one Include/ and one Lib/; the Windows 10 SDK 2563 dnl has FOUR include trees (ucrt, um, shared, winrt) and TWO lib trees 2564 dnl (ucrt, um) per installed version, each under a version directory. 2565 dnl So the single PSDK_HOME/Include and PSDK_HOME/Lib that set_soenv.in 2566 dnl builds by concatenation become a version plus a fixed set of 2567 dnl subdirectories -- and that version is what has to be found here. 2568 AC_MSG_CHECKING([for the Windows 10 SDK]) 2569 dnl Every candidate is judged by ONE rule: does it have Include/<ver>/um? 2570 dnl That is the only cheap thing that separates a Windows 10 SDK from the 2571 dnl old Platform SDK, which also has an Include/ and a Lib/ -- so a test 2572 dnl for those two accepts v7.0 and then fails the version scan below with 2573 dnl a message naming the right directory and the wrong reason. 2574 dnl 2575 dnl In order: what the user said, what the old option said, what the 2576 dnl registry says (oowintool knows only pre-Windows-8 keys, so this is 2577 dnl usually the Platform SDK and usually rejected here), then the two 2578 dnl documented install roots. 2579 windows_sdk_seen= 2580 WINDOWS_SDK_HOME= 2581 for windows_sdk_try in \ 2582 "$with_windows_sdk_home" \ 2583 "$with_psdk_home" \ 2584 "`$OOWINTOOL --psdk-home 2>/dev/null`" \ 2585 "/cygdrive/c/Program Files (x86)/Windows Kits/10" \ 2586 "/cygdrive/c/Program Files/Windows Kits/10" ; do 2587 test -z "$windows_sdk_try" && continue 2588 windows_sdk_try=`cygpath -u "$windows_sdk_try" 2>/dev/null || echo "$windows_sdk_try"` 2589 windows_sdk_try=`echo "$windows_sdk_try" | $SED 's:/$::'` 2590 windows_sdk_seen="$windows_sdk_seen 2591 $windows_sdk_try" 2592 if test -n "`ls -d \"$windows_sdk_try\"/Include/*/um 2>/dev/null`"; then 2593 WINDOWS_SDK_HOME="$windows_sdk_try" 2594 break 2595 fi 2596 done 2597 if test -z "$WINDOWS_SDK_HOME"; then 2598 AC_MSG_ERROR([No Windows 10 SDK found. A directory qualifies only when it has an Include/<version>/um; the old Platform SDK does not, and is not a substitute. Tried, in order:$windows_sdk_seen 2599 2600Use --with-windows-sdk-home to name one explicitly.]) 2601 fi 2602 if test -n "$with_psdk_home" -a "$WINDOWS_SDK_HOME" != "`cygpath -u \"$with_psdk_home\" 2>/dev/null`"; then 2603 AC_MSG_WARN([--with-psdk-home=$with_psdk_home is not a Windows 10 SDK; using $WINDOWS_SDK_HOME instead. It is still used for --with-frame-home purposes only if you passed it there too.]) 2604 fi 2605 2606 dnl Pick the newest COMPLETE version. Completeness matters more than it 2607 dnl sounds: bin/ routinely holds several versions while Include/ and 2608 dnl Lib/ hold one or two, so selecting on bin/ alone can pick a version 2609 dnl that has no headers at all. Compare component by component as 2610 dnl integers -- a plain string compare sorts 10.0.9xxxx above 2611 dnl 10.0.19041. 2612 if test -n "$with_windows_sdk_version"; then 2613 WINDOWS_SDK_VERSION="$with_windows_sdk_version" 2614 else 2615 windows_sdk_candidates= 2616 for sdkver in `ls "$WINDOWS_SDK_HOME/Include" 2>/dev/null`; do 2617 if test -d "$WINDOWS_SDK_HOME/Include/$sdkver/um" -a -d "$WINDOWS_SDK_HOME/Lib/$sdkver/um"; then 2618 windows_sdk_candidates="$windows_sdk_candidates $sdkver" 2619 fi 2620 done 2621 WINDOWS_SDK_VERSION=`for v in $windows_sdk_candidates; do echo $v; done | $AWK -F. '{ printf "%05d%05d%05d%05d %s\n", $1, $2, $3, $4, $0 }' | sort | tail -n 1 | $AWK '{ print $2 }'` 2622 fi 2623 if test -z "$WINDOWS_SDK_VERSION"; then 2624 AC_MSG_ERROR([No complete Windows 10 SDK found under $WINDOWS_SDK_HOME. A version counts as complete only when it has both an Include/<version>/um and a Lib/<version>/um. Use --with-windows-sdk-home and/or --with-windows-sdk-version.]) 2625 fi 2626 AC_MSG_RESULT([$WINDOWS_SDK_VERSION in $WINDOWS_SDK_HOME]) 2627 2628 dnl PSDK_HOME stays the SDK root, so everything downstream that only 2629 dnl wants a base directory keeps working. What changes is that the 2630 dnl include and lib paths are built from the version as well; that 2631 dnl happens in set_soenv.in. 2632 PSDK_HOME="$WINDOWS_SDK_HOME" 2633 2634 windows_sdk_um="$WINDOWS_SDK_HOME/Include/$WINDOWS_SDK_VERSION/um" 2635 if test ! -f "$windows_sdk_um/adoint.h" -o ! -f "$windows_sdk_um/sqlucode.h" -o ! -f "$windows_sdk_um/usp10.h"; then 2636 AC_MSG_ERROR([$windows_sdk_um is missing headers this build needs (adoint.h, sqlucode.h, usp10.h). Install the "Windows SDK for Desktop C++" component.]) 2637 fi 2638 windows_sdk_lib="$WINDOWS_SDK_HOME/Lib/$WINDOWS_SDK_VERSION" 2639 if test ! -f "$windows_sdk_lib/ucrt/x86/ucrt.lib" -a ! -f "$windows_sdk_lib/ucrt/x64/ucrt.lib"; then 2640 AC_MSG_ERROR([$windows_sdk_lib has no ucrt import library for either architecture.]) 2641 fi 2642 2643 dnl The Windows Installer tools moved into bin/<version>/<arch>. They 2644 dnl run on the build machine, so x86 is the right choice whatever is 2645 dnl being built. 2646 WINDOWS_SDK_BINDIR="$WINDOWS_SDK_HOME/bin/$WINDOWS_SDK_VERSION/x86" 2647 for sdktool in msiinfo msidb uuidgen msitran; do 2648 if test ! -x "$WINDOWS_SDK_BINDIR/$sdktool.exe"; then 2649 AC_MSG_ERROR([$sdktool.exe is missing from $WINDOWS_SDK_BINDIR. Install the "MSI Tools" SDK component.]) 2650 fi 2651 done 2652 WINDOWS_VISTA_PSDK=TRUE 2653fi 2654AC_SUBST(WINDOWS_SDK_HOME) 2655AC_SUBST(WINDOWS_SDK_VERSION) 2656AC_SUBST(WINDOWS_SDK_BINDIR) 2657 2658dnl =================================================================== 2659dnl MSBuild, for dependencies that ship Visual Studio project files 2660dnl =================================================================== 2661dnl vcbuild.exe built .vcproj files and shipped with VS2005 and VS2008 2662dnl only; VS2010 replaced it with MSBuild and changed the project format 2663dnl to .vcxproj at the same time, so this is not a renamed binary but a 2664dnl different tool reading different files. CoinMP is the one bundled 2665dnl dependency that needs it. 2666dnl 2667dnl MSBuild lives beside the toolset rather than inside it, and is not on 2668dnl PATH in a BuildTools installation, so it is looked for relative to 2669dnl --with-cl-home: <VS>/VC/Tools/MSVC/<ver> puts the VS root four levels 2670dnl up. Only searched for a UCRT-generation toolset -- VC9 uses vcbuild 2671dnl and must not be given an MSBuild it would not know what to do with. 2672MSBUILD_PATH= 2673if test "$_os" = "WINNT" -a -n "$MSVC_MODERN"; then 2674 AC_MSG_CHECKING([for MSBuild]) 2675 if test -n "$with_msbuild_path"; then 2676 MSBUILD_PATH=`cygpath -u "$with_msbuild_path"` 2677 else 2678 for msbuild_try in \ 2679 "$with_cl_home/../../../../MSBuild/Current/Bin" \ 2680 "$with_cl_home/../../../../MSBuild/15.0/Bin" ; do 2681 if test -x "$msbuild_try/MSBuild.exe"; then 2682 MSBUILD_PATH="$msbuild_try" 2683 break 2684 fi 2685 done 2686 if test -z "$MSBUILD_PATH"; then 2687 AC_PATH_PROG(MSBUILD_EXE, MSBuild.exe) 2688 if test -n "$MSBUILD_EXE"; then 2689 MSBUILD_PATH=`dirname "$MSBUILD_EXE"` 2690 fi 2691 fi 2692 fi 2693 if test -z "$MSBUILD_PATH" -o ! -x "$MSBUILD_PATH/MSBuild.exe"; then 2694 AC_MSG_ERROR([MSBuild.exe not found. It is needed to build CoinMP, whose Visual Studio projects can no longer be built by vcbuild. It is normally beside the toolset, in <VisualStudio>/MSBuild/Current/Bin; use --with-msbuild-path to name it, or --disable-coinmp to do without the Calc solver.]) 2695 fi 2696 dnl Convert to a posix path with 8.3 names, as the other tool paths are 2697 MSBUILD_PATH=`cygpath -d "$MSBUILD_PATH"` 2698 MSBUILD_PATH=`cygpath -u "$MSBUILD_PATH"` 2699 AC_MSG_RESULT([$MSBUILD_PATH]) 2700fi 2701AC_SUBST(MSBUILD_PATH) 2702 2703dnl The PlatformToolset MSBuild should retarget a project to. CoinMP's 2704dnl MSBuild projects are v10, i.e. they name toolset v100 (VS2010), which is 2705dnl not installed -- so the toolset has to be passed on the command line or 2706dnl the build fails with "the build tools for v100 cannot be found". 2707dnl 2708dnl It is derived from the toolset directory name rather than from cl's 2709dnl version, because that name IS the toolset version and needs no parsing 2710dnl of the four-part number configure builds elsewhere: 14.29.30133 is v142, 2711dnl 14.16.x is v141, 14.0x is v140, 14.3x is v143. 2712VCTOOLSET= 2713if test "$_os" = "WINNT" -a -n "$MSVC_MODERN"; then 2714 AC_MSG_CHECKING([which MSBuild PlatformToolset to use]) 2715 vctoolset_ver=`basename "$with_cl_home"` 2716 vctoolset_major=`echo "$vctoolset_ver" | cut -d. -f1` 2717 vctoolset_minor=`echo "$vctoolset_ver" | cut -d. -f2` 2718 if test -n "$vctoolset_major" -a -n "$vctoolset_minor"; then 2719 VCTOOLSET="v$vctoolset_major`expr $vctoolset_minor / 10`" 2720 fi 2721 if test -z "$VCTOOLSET"; then 2722 AC_MSG_ERROR([Could not work out a PlatformToolset from the toolset directory name "$vctoolset_ver". --with-cl-home should name the versioned toolset directory, e.g. .../VC/Tools/MSVC/14.29.30133]) 2723 fi 2724 AC_MSG_RESULT([$VCTOOLSET]) 2725fi 2726AC_SUBST(VCTOOLSET) 2727 2728dnl Compiler detection, logic from setsoenv.in 2729case "$build_os" in 2730 *cygwin*) 2731 if test "$WITH_MINGWIN" = "yes"; then 2732 COM="GCC"; 2733 else 2734 COM="MSC"; 2735 fi;; 2736 os2*) 2737 COM="GCC";; 2738 netbsd | kfreebsd* | freebsd* | linux* | darwin* ) 2739 if $CC --version 2>&1 | $GREP clang > /dev/null ; then 2740 COM="CLANG"; 2741 else 2742 COM="GCC"; 2743 fi;; 2744 solaris*) 2745 case "$CC" in 2746 *gcc*) COM="GCC";; 2747 *) COM="C52";; 2748 esac;; 2749 osf | aix*) 2750 COM="CXX";; 2751 *) AC_MSG_ERROR([Unable to decipher compiler for $build_os]);; 2752esac 2753AC_SUBST(COM) 2754 2755dnl Decode the compiler version. Logic from main/solenv/inc/tg_compv.mk. 2756case $COM in 2757 GCC) 2758 CCVER=`${CC} -dumpfullversion -dumpversion 2>&1`; 2759 CCNUMVER=`echo ${CCVER} | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2760 if test "${CCNUMVER}" -ge 000300000001; then 2761 COMID="gcc3"; 2762 COMNAME="gcc3"; 2763 elif test "${CCNUMVER}" -ge 000300000001; then 2764 COMID="GCC"; 2765 COMNAME="gcc2"; 2766 else 2767 AC_MSG_ERROR([gcc too old]); 2768 fi 2769 ;; 2770 CLANG) 2771 CCVER=`${CC} --version 2>&1 | head -n1 | sed -e"s/.*version //" -e"s/ .*//"`; 2772 CCNUMVER=`echo ${CCVER} | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2773 # The version in tg_compv.mk for darwin does not look correct 2774 # CCNUMVER = `echo ${CCVER} | sed -e"s/\.//"; 2775 case "$build_os" in 2776 darwin*) # Mac OS X 2777 COMID="s5abi"; 2778 COMNAME="s5abi"; 2779 ;; 2780 *) 2781 COMID="gcc3"; 2782 COMNAME="gcc3"; 2783 ;; 2784 esac 2785 ;; 2786 MSC) 2787 CCVER=`${CC} 2>&1 | $AWK -f ${_solenv}/bin/getcompver.awk`; 2788 CCNUMVER=`${CC} 2>&1 | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2789 if test "${CCNUMVER}" -ge 001200000000; then 2790 COMID="MSC"; 2791 case "$build_cpu" in 2792 i?86) 2793 COMNAME="msci"; 2794 ;; 2795 x86_64) 2796 if test "$BUILD_WIN64" = "TRUE" ; then 2797 COMNAME="mscx"; 2798 else 2799 COMNAME="msci"; 2800 fi 2801 ;; 2802 *) 2803 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2804 ;; 2805 esac 2806 else 2807 AC_MSG_ERROR([MSC compiler too old]); 2808 fi 2809 ;; 2810 C55 | C54 | C52 | C40 | sunpro) 2811 CCVER=`${CC} -V 2>&1 | $AWK -f ${_solenv}/bin/getcompver.awk`; 2812 CCNUMVER=`${CC} -V 2>&1 | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2813 if test "${CCNUMVER}" -ge 00050002; then 2814 COMID="C52"; 2815 COMNAME="sunpro5"; 2816 else 2817 AC_MSG_ERROR([Sun compiler too old]); 2818 fi 2819 ;; 2820 *) 2821 AC_MSG_ERROR([Unable to detect compiler version]);; 2822esac 2823AC_SUBST(CCVER) 2824AC_SUBST(CCNUMVER) 2825AC_SUBST(COMID) 2826AC_SUBST(COMNAME) 2827 2828if test "$_os" = "FreeBSD"; then 2829 FBSD_GCC_RPATH= 2830 if test "$COM" = "GCC"; then 2831 rpath=`$CC --print-file-name libstdc++.so` 2832 rpath=`realpath $rpath` 2833 rpath=`dirname $rpath` 2834 if test "$rpath" != "/usr/lib" ; then 2835 FBSD_GCC_RPATH="-Wl,-rpath=$rpath" 2836 fi 2837 fi 2838 AC_SUBST(FBSD_GCC_RPATH) 2839fi 2840 2841if test "$_os" = "Linux" -o "$_os" = "FreeBSD" -o "$_os" = "GNU"; then 2842 AC_MSG_CHECKING( for --undefined-version linker support ) 2843 undefined_version_ldflags_save=$LDFLAGS 2844 LDFLAGS="$LDFLAGS -Wl,--undefined-version" 2845 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 2846 #include <stdio.h> 2847 ],[ 2848 printf ("hello world\n"); 2849 ])], HAVE_LD_UNDEFINED_VERSION=TRUE, HAVE_LD_UNDEFINED_VERSION=FALSE) 2850 if test "z$HAVE_LD_UNDEFINED_VERSION" = "zTRUE"; then 2851 AC_MSG_RESULT( found ) 2852 else 2853 AC_MSG_RESULT( not found ) 2854 fi 2855 LDFLAGS=$undefined_version_ldflags_save 2856 AC_SUBST(HAVE_LD_UNDEFINED_VERSION) 2857fi 2858 2859dnl =================================================================== 2860dnl .NET needs special treatment 2861dnl =================================================================== 2862if test "$_os" = "WINNT"; then 2863if test "$WITH_MINGWIN" = "yes" || test "$COMEX" -ge "10"; then 2864 dnl Check midl.exe 2865 AC_PATH_PROG(MIDL_PATH, midl.exe) 2866 if test -n "$MIDL_PATH";then 2867 MIDL_PATH=`dirname "$MIDL_PATH"` 2868 fi 2869 if test -n "$with_midl_path";then 2870 with_midl_path=`cygpath -u "$with_midl_path"` 2871 fi 2872 if test -x "$with_midl_path/midl.exe"; then 2873 MIDL_PATH="$with_midl_path" 2874 fi 2875 if test -z "$MIDL_PATH" -a -e "$with_cl_home/../Common7/Tools/Bin/midl.exe"; then 2876 MIDL_PATH="$with_cl_home/../Common7/Tools/Bin" 2877 fi 2878 if test -z "$MIDL_PATH" ; then 2879 vstest=`$OOWINTOOL --msvs-productdir`; 2880 if test -x "$vstest/Common7/Tools/Bin/midl.exe" ; then 2881 MIDL_PATH="$vstest/Common7/Tools/Bin" 2882 fi 2883 fi 2884 if test -z "$MIDL_PATH" ; then 2885 psdktest=`$OOWINTOOL --psdk-home` 2886 if test -x "$psdktest/Bin/midl.exe" ; then 2887 MIDL_PATH="$psdktest/Bin" 2888 fi 2889 fi 2890 dnl On the Windows 10 SDK midl.exe sits with the other SDK tools in 2891 dnl bin/<version>/<arch>. This is preferred over what the searches above 2892 dnl turn up -- an AC_PATH_PROG hit from an ambient vcvars environment is 2893 dnl exactly the kind of midl/headers mismatch that surfaces much later as 2894 dnl output the compiler cannot parse -- but NOT over --with-midl-path, 2895 dnl which is the user saying which one they mean. 2896 if test -z "$with_midl_path" \ 2897 -a -n "$WINDOWS_SDK_BINDIR" -a -x "$WINDOWS_SDK_BINDIR/midl.exe" ; then 2898 MIDL_PATH="$WINDOWS_SDK_BINDIR" 2899 fi 2900 if test ! -x "$MIDL_PATH/midl.exe"; then 2901 AC_MSG_ERROR([midl.exe not found. Make sure it's in the path or use --with-midl-path]) 2902 fi 2903 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2904 MIDL_PATH=`cygpath -d "$MIDL_PATH"` 2905 MIDL_PATH=`cygpath -u "$MIDL_PATH"` 2906 2907 dnl Check csc.exe 2908 AC_PATH_PROG(CSC_PATH, csc.exe) 2909 if test -n "$CSC_PATH";then 2910 CSC_PATH=`dirname "$CSC_PATH"` 2911 fi 2912 if test -n "$with_csc_path";then 2913 with_csc_path=`cygpath -u "$with_csc_path"` 2914 fi 2915 if test -x "$with_csc_path/csc.exe"; then 2916 CSC_PATH="$with_csc_path" 2917 else 2918 csctest=`$OOWINTOOL --csc-compilerdir`; 2919 if test -x "$csctest/csc.exe"; then 2920 CSC_PATH="$csctest" 2921 fi 2922 fi 2923 dnl Which CLR the C# half must target is decided by the C++ half, and a 2924 dnl UCRT-generation compiler settles it: /clr has not emitted CLR 2 2925 dnl assemblies since VS2010. Mixing the two does not fail at build time, 2926 dnl it fails when the process loads them -- 2927 dnl 2928 dnl System.BadImageFormatException: ... The assembly was created by a 2929 dnl runtime that is newer than the currently loaded runtime 2930 dnl 2931 dnl oowintool goes looking for the v2 csc on purpose, which is right for 2932 dnl VC9 and wrong here, so take the newest compiler beside it instead. 2933 dnl This overrides an explicit --with-csc-path, because the constraint is 2934 dnl the compiler's and not a preference; hence the warning. 2935 if test -n "$MSVC_MODERN" -a -z "$DISABLE_CLI"; then 2936 AC_MSG_CHECKING([for a csc.exe matching the C++ compiler's CLR]) 2937 case "$CSC_PATH" in 2938 *[[Vv]]1.*|*[[Vv]]2.*|*[[Vv]]3.*) 2939 _csc_root=`dirname "$CSC_PATH"` 2940 _csc_new= 2941 for _c in `ls -d "$_csc_root"/[[Vv]]4* 2>/dev/null | sort -r`; do 2942 if test -x "$_c/csc.exe"; then 2943 _csc_new="$_c" 2944 break 2945 fi 2946 done 2947 if test -n "$_csc_new"; then 2948 if test -n "$with_csc_path"; then 2949 AC_MSG_WARN([--with-csc-path points at a CLR 2 compiler; using $_csc_new instead, because this C++ compiler emits CLR 4 assemblies]) 2950 fi 2951 CSC_PATH="$_csc_new" 2952 AC_MSG_RESULT([$CSC_PATH]) 2953 else 2954 AC_MSG_RESULT([none found]) 2955 AC_MSG_ERROR([This C++ compiler emits CLR 4 assemblies, but only a CLR 2 csc.exe was found. Point --with-csc-path at a v4 .NET Framework directory, or configure --disable-cli.]) 2956 fi 2957 ;; 2958 *) 2959 AC_MSG_RESULT([$CSC_PATH]) 2960 ;; 2961 esac 2962 fi 2963 if test ! -x "$CSC_PATH/csc.exe" -a -z "$DISABLE_CLI"; then 2964 AC_MSG_ERROR([csc.exe not found. Make sure it's in the path or use --with-csc-path, or configure --disable-cli]) 2965 fi 2966 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2967 CSC_PATH=`cygpath -d "$CSC_PATH"` 2968 CSC_PATH=`cygpath -u "$CSC_PATH"` 2969 2970 dnl Check mscoree.lib / .NET Frameworks dir 2971 dnl For VS2003/2005 $with_frame_home has to point to the directory with lib/mscoree.lib. 2972 AC_MSG_CHECKING(.NET Framework) 2973 if test -n "$with_frame_home"; then 2974 with_frame_home=`cygpath -u "$with_frame_home"` 2975 fi 2976 if test -f "$with_frame_home/lib/mscoree.lib"; then 2977 FRAME_HOME="$with_frame_home" 2978 fi 2979 if test -z "$FRAME_HOME" -a -e "$with_cl_home/../SDK/v1.1/lib/mscoree.lib"; then 2980 FRAME_HOME="$with_cl_home/../SDK/v1.1" 2981 fi 2982 if test -z "$FRAME_HOME" ; then 2983 frametest=`$OOWINTOOL --dotnetsdk-dir` 2984 if test -f "$frametest/lib/mscoree.lib"; then 2985 FRAME_HOME="$frametest" 2986 else 2987 frametest=`$OOWINTOOL --psdk-home` 2988 if test -f "$frametest/lib/mscoree.lib"; then 2989 FRAME_HOME="$frametest" 2990 fi 2991 fi 2992 fi 2993 if test ! -f "$FRAME_HOME/lib/mscoree.lib" -a -z "$DISABLE_CLI"; then 2994 AC_MSG_ERROR([mscoree.lib (.NET Framework) not found. Make sure you use --with-frame-home, or configure --disable-cli]) 2995 fi 2996 AC_MSG_RESULT(found) 2997 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2998 FRAME_HOME=`cygpath -d "$FRAME_HOME"` 2999 FRAME_HOME=`cygpath -u "$FRAME_HOME"` 3000fi 3001AC_SUBST(MIDL_PATH) 3002AC_SUBST(CSC_PATH) 3003AC_SUBST(FRAME_HOME) 3004fi 3005 3006dnl =================================================================== 3007dnl Check if stdc headers are available excluding Windows. 3008dnl =================================================================== 3009if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3010 AC_CHECK_INCLUDES_DEFAULT 3011AC_PROG_EGREP 3012 3013fi 3014 3015dnl =================================================================== 3016dnl Find pre-processors. 3017dnl =================================================================== 3018if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3019 AC_PROG_CXXCPP 3020 3021dnl Check whether there's a C pre-processor. 3022dnl =================================================================== 3023dnl When using SunStudio compiler, there is a bug with the cc 3024dnl preprocessor, so use CC preprocessor as the cc preprocessor 3025dnl See Issuezilla #445. 3026dnl =================================================================== 3027 if test "$_os" = "SunOS"; then 3028 CPP=$CXXCPP 3029 else 3030 AC_PROG_CPP 3031 fi 3032fi 3033 3034AC_CHECK_SIZEOF(long) 3035SIZEOF_LONG=$ac_cv_sizeof_long 3036AC_SUBST(SIZEOF_LONG) 3037AC_C_BIGENDIAN([], [], [], [:]) 3038WORDS_BIGENDIAN=$ac_cv_c_bigendian 3039AC_SUBST(WORDS_BIGENDIAN) 3040 3041dnl Check for large file support 3042AC_SYS_LARGEFILE 3043if test -n "$ac_cv_sys_file_offset_bits"; then 3044 LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" 3045fi 3046if test -n "$ac_cv_sys_large_files" && test "$ac_cv_sys_large_files" != "no"; then 3047 LFS_CFLAGS="$LFS_CFLAGS -D_LARGE_FILES" 3048fi 3049AC_SUBST(LFS_CFLAGS) 3050 3051dnl =================================================================== 3052dnl Check if valgrind.h is available 3053dnl =================================================================== 3054if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then 3055 dnl Test $prefix (currently only testing for /usr and /usr/local) 3056 dnl so that VALGRIND_CFLAGS = -I$prefix/include/valgrind 3057 VALGRIND_CFLAGS="" 3058 prev_cppflags=$CPPFLAGS 3059 if test -z "$VALGRIND_CFLAGS"; then 3060 CPPFLAGS="-I/usr/include/valgrind" 3061 AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], [unset ac_cv_header_valgrind_h]) 3062 fi 3063 if test -z "$VALGRIND_CFLAGS"; then 3064 CPPFLAGS="-I/usr/local/include/valgrind" 3065 AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], []) 3066 fi 3067 if test -n "$VALGRIND_CFLAGS"; then 3068 CPPFLAGS=$VALGRIND_CFLAGS 3069 AC_CHECK_HEADER([memcheck.h], [], [VALGRIND_CFLAGS=""]) 3070 fi 3071 CPPFLAGS=$prev_cppflags 3072fi 3073AC_SUBST([VALGRIND_CFLAGS]) 3074 3075dnl =================================================================== 3076dnl Check if cups/cups.h is available 3077dnl =================================================================== 3078if test "$test_cups" = "yes" -a "$ENABLE_CUPS" = "TRUE" ; then 3079 AC_CHECK_HEADER(cups/cups.h, [], 3080 [AC_MSG_ERROR([cups/cups.h could not be found. libcupsys2-dev or cups???-devel missing?])], []) 3081fi 3082 3083dnl =================================================================== 3084dnl Check if PAM/pam_appl.h is available on Linux or FreeBSD 3085dnl =================================================================== 3086if test "$_os" = "Linux" -o "$_os" = "FreeBSD" -o "$_os" = "GNU"; then 3087 AC_MSG_CHECKING([whether to enable pam support]) 3088 if test -z "$enable_pam" || test "$enable_pam" != "no"; then 3089 AC_MSG_RESULT([yes]) 3090 PAM=YES 3091 AC_CHECK_HEADER(security/pam_appl.h, [], 3092 [AC_MSG_ERROR([pam_appl.h could not be found. libpam-dev or pam-devel missing?])], []) 3093 AC_MSG_CHECKING([whether to link to libpam]) 3094 if test -n "$enable_pam_link" -a "$enable_pam_link" != "no"; then 3095 AC_MSG_RESULT([yes]) 3096 PAM_LINK=YES 3097 AC_CHECK_LIB(pam, pam_start, [], 3098 [AC_MSG_ERROR(libpam not found or functional)], []) 3099 else 3100 AC_MSG_RESULT([no, dynamically open it]) 3101 PAM_LINK=NO 3102 fi 3103 else 3104 AC_MSG_RESULT([no]) 3105 PAM=NO 3106 PAM_LINK=NO 3107 dnl check getspnam_r for needed args (4 or 5) 3108 AX_FUNC_WHICH_GETSPNAM_R 3109 fi 3110fi 3111AC_SUBST(PAM) 3112AC_SUBST(NEW_SHADOW_API) 3113AC_SUBST(PAM_LINK) 3114 3115if test "$_os" = "Linux"; then 3116 AC_MSG_CHECKING([whether to link to libcrypt]) 3117 if test -n "$enable_crypt_link" -a "$enable_crypt_link" != "no"; then 3118 AC_MSG_RESULT([yes]) 3119 CRYPT_LINK=YES 3120 AC_CHECK_LIB(crypt, crypt, [], 3121 [AC_MSG_ERROR(libcrypt not found or functional)], []) 3122 else 3123 AC_MSG_RESULT([no, dynamically open it]) 3124 CRYPT_LINK=NO 3125 fi 3126fi 3127AC_SUBST(CRYPT_LINK) 3128 3129dnl =================================================================== 3130dnl Testing for c++ compiler and version... 3131dnl =================================================================== 3132if test -n "$with_gcc_home"; then 3133 if test -z "$CXX"; then 3134 CXX="$with_gcc_home/bin/g++" 3135 fi 3136fi 3137 3138if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 3139 if test -e "$CC"; then 3140 CXX="$CC" 3141 fi 3142fi 3143 3144dnl Autoconf 2.53 can do this test for cl.exe, 2.13 can't! 3145if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3146 AC_PROG_CXX 3147fi 3148 3149dnl check if we are using a buggy version of g++ (currently 3.4.0, 3.4.1 and trunk) 3150if test "$GXX" = "yes"; then 3151 AC_MSG_CHECKING([the GNU C++ compiler version]) 3152 3153 _gpp_version=`$CXX -dumpversion` 3154 _gpp_majmin=`echo $_gpp_version | $AWK -F. '{ print \$1*100+\$2 }'` 3155 3156 AC_MSG_RESULT([checked (g++ $_gpp_version)]) 3157 3158 if test "$_gpp_majmin" = "304"; then 3159 AC_MSG_CHECKING([whether $CXX has the enum bug]) 3160AC_RUN_IFELSE([AC_LANG_SOURCE([[ 3161extern "C" void abort (void); 3162extern "C" void exit (int status); 3163 3164enum E { E0, E1, E2, E3, E4, E5 }; 3165 3166void 3167test (enum E e) 3168{ 3169 if (e == E2 || e == E3 || e == E1) 3170 exit (1); 3171} 3172 3173int 3174main (void) 3175{ 3176 test (E4); 3177 test (E5); 3178 test (E0); 3179 return 0; 3180} 3181]])],[AC_MSG_ERROR([your version of the GNU C++ compiler has a bug which prevents Apache OpenOffice from being compiled correctly - please check https://gcc.gnu.org/ml/gcc-patches/2004-07/msg00968.html for details.])],[AC_MSG_RESULT([no])],[]) 3182 fi 3183fi 3184 3185dnl =================================================================== 3186dnl Set the mingw runtime library include directories 3187dnl =================================================================== 3188if test "$WITH_MINGWIN" = "yes"; then 3189 AC_MSG_CHECKING([for mingwin runtime include path]) 3190 cat >conftest.$ac_ext <<_ACEOF 3191#include <stddef.h> 3192#include <bits/c++config.h> 3193_ACEOF 3194 _mingw_lib_include_path=`$CXX -E -xc++ conftest.$ac_ext | $SED -n -e '/.*1*"\(.*\)\/stddef.h".*/s//\1/p' -e '/.*1*"\(.*\)\/bits\/c++config.h".*/s//\1/p' | sort -u | xargs echo` 3195 rm conftest.$ac_ext 3196 if test -n "$_mingw_lib_include_path"; then 3197 _temp="" 3198 for a in $_mingw_lib_include_path 3199 do 3200 a=`cygpath -d "$a"` 3201 _temp="$_temp "`cygpath -u "$a"` 3202 done 3203 _mingw_lib_include_path=$_temp 3204 fi 3205 if test -z "$_mingw_lib_include_path"; then 3206 _mingw_lib_include_path="NO_LIB_INCLUDE" 3207 AC_MSG_RESULT([no mingwin runtime includes]) 3208 else 3209 AC_MSG_RESULT([$_mingw_lib_include_path]) 3210 fi 3211 MINGW_LIB_INCLUDE_PATH="$_mingw_lib_include_path" 3212 AC_SUBST(MINGW_LIB_INCLUDE_PATH) 3213dnl mingw gcc 4.4.0 needs backward in include path to use hash_set/hash_map 3214 AC_MSG_CHECKING([for mingwin c++ backward include path]) 3215 cat >conftest.$ac_ext <<_ACEOF 3216#include <hash_set> 3217_ACEOF 3218 _mingw_backward_include_path=`$CXX -E -xc++ -Wno-deprecated conftest.$ac_ext 2>&5| $SED -n -e '/.*1*"\(.*\)\/hash_set".*/s//\1/p' | sort -u | xargs echo` 3219 rm conftest.$ac_ext 3220 if test -n "$_mingw_backward_include_path"; then 3221 _mingw_backward_include_path=`cygpath -d $_mingw_backward_include_path` 3222 _mingw_backward_include_path=`cygpath -u $_mingw_backward_include_path` 3223 AC_MSG_RESULT([$_mingw_backward_include_path]) 3224 else 3225 _mingw_backward_include_path="NO_BACKWARD_INCLUDE" 3226 AC_MSG_RESULT([no mingwin c++ backward includes]) 3227 fi 3228 MINGW_BACKWARD_INCLUDE_PATH="$_mingw_backward_include_path" 3229 AC_SUBST(MINGW_BACKWARD_INCLUDE_PATH) 3230 mingw_crtbegin=`$CC -print-file-name=crtbegin.o` 3231 MINGW_CLIB_DIR=`dirname $mingw_crtbegin` 3232 AC_MSG_CHECKING([whether to use dynamic libgcc]) 3233 if test -e "$MINGW_CLIB_DIR/libgcc_s.a"; then 3234 AC_MSG_CHECKING([dynamic libgcc name]) 3235 MINGW_GCCDLL_pattern=`nm $MINGW_CLIB_DIR/libgcc_s.a | sed -ne 's@.* _libgcc\(.*\)_dll_iname@libgcc\1.dll@p' | uniq | sed -e 's@_@?@g'` 3236 MINGW_GCCDLL=`cd $COMPATH/bin && ls $MINGW_GCCDLL_pattern 2>/dev/null` 3237 if test -n "$MINGW_GCCDLL"; then 3238 MINGW_SHARED_GCCLIB=YES 3239 AC_MSG_RESULT([use $MINGW_GCCDLL]) 3240 else 3241 AC_MSG_RESULT([no]) 3242 fi 3243 else 3244 AC_MSG_RESULT([no]) 3245 fi 3246 if test -e "$MINGW_CLIB_DIR/libgcc_eh.a"; then 3247 MINGW_GCCLIB_EH=YES 3248 fi 3249 AC_MSG_CHECKING([whether to use dynamic libstdc++]) 3250 MINGW_SHARED_LIBSTDCPP= 3251 if test -e "$MINGW_CLIB_DIR/libstdc++_s.a" ; then 3252 MINGW_SHARED_LIBSTDCPP=stdc++_s 3253 fi 3254 if test -e "$MINGW_CLIB_DIR/libstdc++.dll.a" ; then 3255 MINGW_SHARED_LIBSTDCPP=stdc++.dll 3256 fi 3257 if test -n "$MINGW_SHARED_LIBSTDCPP" ; then 3258 AC_MSG_CHECKING([dynamic libstdc++ name]) 3259 MINGW_GXXDLL_pattern=`nm $MINGW_CLIB_DIR/lib$MINGW_SHARED_LIBSTDCPP.a | sed -ne 's@.* _libstdc__\(.*\)_dll_iname@libstdc++\1.dll@p' | uniq | sed -e 's@_@?@g'` 3260 MINGW_GXXDLL=`cd $COMPATH/bin && ls $MINGW_GXXDLL_pattern 2>/dev/null` 3261 if test -n "$MINGW_GXXDLL"; then 3262 MINGW_SHARED_LIBSTDCPP=-l$MINGW_SHARED_LIBSTDCPP 3263 MINGW_SHARED_GXXLIB=YES 3264 AC_MSG_RESULT([use $MINGW_GXXDLL]) 3265 else 3266 MINGW_SHARED_LIBSTDCPP= 3267 AC_MSG_RESULT([no]) 3268 fi 3269 else 3270 AC_MSG_RESULT([no]) 3271 fi 3272 MINGW_CLIB_DIR=`cygpath $MINGW_CLIB_DIR` 3273 AC_SUBST(MINGW_CLIB_DIR) 3274 AC_SUBST(MINGW_SHARED_GCCLIB) 3275 AC_SUBST(MINGW_GCCLIB_EH) 3276 AC_SUBST(MINGW_SHARED_GXXLIB) 3277 AC_SUBST(MINGW_SHARED_LIBSTDCPP) 3278 AC_SUBST(MINGW_GCCDLL) 3279 AC_SUBST(MINGW_GXXDLL) 3280fi 3281 3282dnl =================================================================== 3283dnl Extra checking for the SUN OS compiler 3284dnl =================================================================== 3285if test "$_os" = "SunOS"; then 3286 dnl SunStudio C++ compiler packaged with SunStudio C compiler 3287 if test "$CC" = "cc"; then 3288 AC_MSG_CHECKING([SunStudio C++ Compiler]) 3289 if test "$CXX" != "CC"; then 3290 AC_MSG_WARN([SunStudio C++ was not found]) 3291 echo "SunStudio C++ was not found" >> warn 3292 else 3293 AC_MSG_RESULT([checked]) 3294 fi 3295 fi 3296fi 3297dnl =================================================================== 3298dnl Extra checking for the OSF compiler 3299dnl =================================================================== 3300if test "$_os" = "OSF1"; then 3301 AC_MSG_CHECKING([Compaq C++ compiler version]) 3302 dnl cxx -V outputs to standard error!!!! 3303 _compaqcxx_version=`$CXX -V 2>&1 | $AWK '{ print $3 }'` 3304 _compaqcxx_major=`echo $_compaqcxx_version | $AWK -F. '{ print $1 }'` 3305 if test "$_compaqcxx_major" != "V6"; then 3306 AC_MSG_WARN([found version "$_compaqc_version", use version 6 of the Compaq C++ compiler]) 3307 echo "found version $_compaqc_version, use version 6 of the Compaq C++ compiler" >> warn 3308 else 3309 dnl compiler will do 3310 AC_MSG_RESULT([checked]) 3311 fi 3312fi 3313 3314dnl ************************************************************* 3315dnl Testing for exception handling - dwarf2 or sjlj exceptions... 3316dnl ************************************************************* 3317AC_MSG_CHECKING([exception type]) 3318AC_LANG_PUSH([C++]) 3319if test "$WITH_MINGWIN" = "yes"; then 3320 AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <iostream> 3321 3322extern "C" void _Unwind_SjLj_RaiseException(void) __attribute__ ((__noreturn__)); 3323 3324 ]], [[_Unwind_SjLj_RaiseException() ]])],[exceptions_type="sjlj"],[exceptions_type="dwarf2" 3325 ]) 3326fi 3327 3328AC_MSG_RESULT($exceptions_type) 3329AC_LANG_POP([C++]) 3330EXCEPTIONS="$exceptions_type" 3331AC_SUBST(EXCEPTIONS) 3332 3333dnl =================================================================== 3334dnl Checks for what the default STL should be 3335dnl =================================================================== 3336 AC_MSG_CHECKING([what the default STL should be]) 3337 DEFAULT_TO_STLPORT="no" 3338if test "$WITH_STLPORT" != "no"; then 3339 AC_MSG_ERROR([Option --with-stlport is no longer available.]) 3340else 3341 USE_SYSTEM_STL="YES" 3342fi 3343 3344AC_SUBST(USE_SYSTEM_STL) 3345 3346dnl =================================================================== 3347dnl visibility feature 3348dnl =================================================================== 3349if test "$GCC" = "yes"; then 3350 AC_MSG_CHECKING([whether $CC supports -fvisibility=hidden]) 3351 save_CFLAGS=$CFLAGS 3352 CFLAGS="$CFLAGS -fvisibility=hidden" 3353 AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_VISIBILITY_FEATURE=TRUE ],[]) 3354 CFLAGS=$save_CFLAGS 3355 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3356 AC_MSG_RESULT([yes]) 3357 else 3358 AC_MSG_RESULT([no]) 3359 fi 3360fi 3361 3362# =================================================================== 3363# use --ccache-skip? 3364# =================================================================== 3365dnl used to escape compiler options for ccache that otherwise prevent 3366dnl caching of the results (like "-x objective-c++" for Mac) 3367AC_MSG_CHECKING([whether we are allowed and able to use --ccache-skip]) 3368if test "$_os" != "Darwin" ; then 3369 AC_MSG_RESULT([only used on Mac currently, skipping]) 3370elif test "$enable_ccache_skip" = "no" ; then 3371 AC_MSG_RESULT([no - disabled explicitly]) 3372elif test "$enable_ccache_skip" = "yes" ; then 3373 AC_MSG_RESULT([yes - enabled explicitly, skipping checks]) 3374 AC_SUBST([USE_CCACHE], [YES]) 3375elif test "$enable_ccache_skip" = "auto" ; then 3376 # checking for ccache presence/version 3377 AC_MSG_RESULT([probing...]) 3378 AC_PATH_PROG([CCACHE],[ccache],[not_found]) 3379 if test "$CCACHE" = "not_found" ; then 3380 AC_MSG_NOTICE([not enabling --ccache-skip (ccache not found)]) 3381 else 3382 # check ccache version 3383 AC_MSG_CHECKING([whether version of ccache is suitable]) 3384 CCACHE_VERSION=`"$CCACHE" -V | "$AWK" '/^ccache version/{print $3}'` 3385 if test "$CCACHE_VERSION" = "2.4_OOo"; then 3386 AC_MSG_RESULT([yes]) 3387 AC_MSG_CHECKING([whether ccache is actually used for the build]) 3388 AC_LANG_PUSH([C++]) 3389 save_CXXFLAGS=$CXXFLAGS 3390 CXXFLAGS="$CXXFLAGS --ccache-skip -O2" 3391 dnl an empty program will do, we're checking the compiler flags 3392 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], 3393 [use_ccache=yes], [use_ccache=no]) 3394 if test $use_ccache = yes ; then 3395 AC_MSG_RESULT([yes, will enable --ccache-skip]) 3396 AC_SUBST([USE_CCACHE], [YES]) 3397 else 3398 AC_MSG_RESULT([no, will not enable --ccache-skip]) 3399 fi 3400 CXXFLAGS=$save_CXXFLAGS 3401 AC_LANG_POP([C++]) 3402 else 3403 AC_MSG_RESULT([no]) 3404 AC_MSG_NOTICE([ccache version $CCACHE_VERSION not accepted. See description for --enable-ccache-skip]) 3405 fi 3406 fi 3407else 3408 AC_MSG_ERROR([invalid option to --enable-ccache-skip. Valid values are "auto", "yes" and "no"]) 3409fi 3410 3411dnl =================================================================== 3412dnl system stl sanity tests 3413dnl =================================================================== 3414if false ; then # TODO: update TR1 compliant STLs 3415if test "$USE_SYSTEM_STL" = "YES"; then 3416 AC_MSG_CHECKING([system stl sanity]) 3417 AC_LANG_PUSH([C++]) 3418 3419 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3420 AC_MSG_CHECKING([if STL headers are visibility safe]) 3421 AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no) 3422 AC_MSG_RESULT([$stlvisok]) 3423 if test "$stlvisok" = "no"; then 3424 AC_MSG_WARN([Your gcc STL headers are not visibility safe. Disabling visibility]) 3425 echo "Your gcc STL headers are not visibility safe. Disabling visibility" >> warn 3426 unset HAVE_GCC_VISIBILITY_FEATURE 3427 fi 3428 fi 3429 3430 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3431 sharedlink_ldflags_save=$LDFLAGS 3432 LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden -fpic -shared" 3433 3434 AC_MSG_CHECKING([if gcc is -fvisibility-inlines-hidden safe with STL headers]) 3435 AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <sstream> 3436using namespace std; 3437]], [[istringstream strm( "test" ); return 0;]])],[$EGREP -q unresolvable conftest.err; 3438 if test $? -eq 0; then gccvisok=no; else gccvisok=yes; fi],[gccvisok=no]) 3439 AC_MSG_RESULT([$gccvisok]) 3440 if test "$gccvisok" = "no"; then 3441 AC_MSG_WARN([Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility]) 3442 echo "Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility" >> warn 3443 unset HAVE_GCC_VISIBILITY_FEATURE 3444 fi 3445 3446 LDFLAGS=$sharedlink_ldflags_save 3447 fi 3448 3449 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3450 AC_MSG_CHECKING([if gcc has a visibility bug with class-level attributes (GCC bug 26905)]) 3451 cat >visibility.cxx <<_ACEOF 3452#pragma GCC visibility push(hidden) 3453struct __attribute__ ((visibility ("default"))) TestStruct { 3454 static void Init(); 3455}; 3456__attribute__ ((visibility ("default"))) void TestFunc() { 3457 TestStruct::Init(); 3458} 3459_ACEOF 3460 if ! $CXX $CXXFLAGS $CPPFLAGS -fpic -S visibility.cxx 2>/dev/null > /dev/null; then 3461 gccvisbroken=yes 3462 else 3463 case "$build_cpu" in 3464 i?86|x86_64) 3465 if $EGREP -q '@PLT' visibility.s; then 3466 gccvisbroken=no 3467 else 3468 gccvisbroken=yes 3469 fi 3470 ;; 3471 *) 3472 gccvisbroken=no 3473 ;; 3474 esac 3475 fi 3476 rm -f visibility.s visibility.cxx 3477 3478 AC_MSG_RESULT([$gccvisbroken]) 3479 if test "$gccvisbroken" = "yes"; then 3480 AC_MSG_WARN([Your gcc is not -fvisibility=hidden safe. Disabling visibility]) 3481 echo "Your gcc is not -fvisibility=hidden safe. Disabling visibility" >> warn 3482 unset HAVE_GCC_VISIBILITY_FEATURE 3483 fi 3484 fi 3485 3486 AC_LANG_POP([C++]) 3487fi 3488fi # endof TODO: update TR1 compliant STLs 3489 3490AC_SUBST(HAVE_GCC_VISIBILITY_FEATURE) 3491 3492dnl =================================================================== 3493dnl allocator 3494dnl =================================================================== 3495AC_MSG_CHECKING([which memory allocator to use]) 3496if test "$enable_jemalloc" = "yes"; then 3497 case "$_os" in 3498 Linux|Darwin) ;; 3499 *) AC_MSG_ERROR([--enable-jemalloc is only supported on Linux and macOS]) ;; 3500 esac 3501 if test -n "$with_alloc" -a "$with_alloc" != "jemalloc"; then 3502 AC_MSG_ERROR([--enable-jemalloc cannot be combined with --with-alloc=$with_alloc]) 3503 fi 3504 AC_MSG_RESULT([jemalloc (bundled)]) 3505 ALLOC="JEMALLOC" 3506 ENABLE_JEMALLOC=YES 3507 BUILD_TYPE="$BUILD_TYPE JEMALLOC" 3508 with_alloc="bundled-jemalloc" 3509fi 3510if test "$with_alloc" = "system"; then 3511 AC_MSG_RESULT([system]) 3512 ALLOC="SYS_ALLOC"; 3513 AC_CHECK_FUNCS([malloc realloc calloc free]) 3514fi 3515if test "$with_alloc" = "tcmalloc"; then 3516 AC_MSG_RESULT(tcmalloc) 3517 if ! echo $build_cpu | $GREP -E 'i[[3456]]86' 2>/dev/null >/dev/null; then 3518 AC_MSG_ERROR([tcmalloc only available/usable on ix86]) 3519 fi 3520 AC_CHECK_LIB(tcmalloc, malloc, [], 3521 [AC_MSG_ERROR(tcmalloc not found or functional. Install the Google Profiling Tools)], []) 3522 ALLOC="TCMALLOC"; 3523fi 3524if test "$with_alloc" = "jemalloc"; then 3525 if test "$_os" != "FreeBSD" -o "$_os" != "NetBSD"; then 3526 AC_MSG_RESULT(jemalloc) 3527 save_CFLAGS=$CFLAGS 3528 CFLAGS="$CFLAGS -pthread" 3529 AC_CHECK_LIB(jemalloc, malloc, [], 3530 [AC_MSG_ERROR(jemalloc not found or functional. Install the jemalloc allocator.)], []) 3531 ALLOC="JEMALLOC"; 3532 CFLAGS=$save_CFLAGS 3533 else 3534 AC_MSG_RESULT([system]) 3535 ALLOC="SYS_ALLOC"; 3536 AC_CHECK_FUNCS([malloc realloc calloc free]) 3537 fi 3538fi 3539if test "$with_alloc" = "internal" -o -z "$with_alloc"; then 3540 AC_MSG_RESULT([internal]) 3541fi 3542AC_SUBST(ALLOC) 3543AC_SUBST(ENABLE_JEMALLOC) 3544 3545dnl =================================================================== 3546dnl Custom build version 3547dnl =================================================================== 3548 3549AC_MSG_CHECKING([whether to add custom build version]) 3550if test "z$with_build_version" != "z"; then 3551 BUILD_VER_STRING=$with_build_version 3552 AC_MSG_RESULT([yes, $BUILD_VER_STRING]) 3553else 3554 BUILD_VER_STRING= 3555 AC_MSG_RESULT([no]) 3556fi 3557AC_SUBST(BUILD_VER_STRING) 3558 3559dnl =================================================================== 3560dnl Java support enable 3561dnl =================================================================== 3562AC_MSG_CHECKING([whether to build with Java support]) 3563if test "$WITH_JAVA" != "no"; then 3564 AC_MSG_RESULT([yes]) 3565 SOLAR_JAVA="TRUE" 3566else 3567 AC_MSG_RESULT([no]) 3568 SOLAR_JAVA="" 3569 3570 AC_MSG_WARN([building without java will mean some features will not be available]) 3571 echo "building without java will mean some features will not be available" >>warn 3572fi 3573AC_SUBST(SOLAR_JAVA) 3574 3575if test "$_os" = "Linux" && test "$build_cpu" = "powerpc"; then 3576 # IBMs JDK needs this... 3577 JITC_PROCESSOR_TYPE=6 3578 export JITC_PROCESSOR_TYPE 3579fi 3580 3581if test "$_os" = "WINNT"; then 3582 if test -z "$with_jdk_home"; then 3583 AC_MSG_CHECKING([for JDK home]) 3584 _jdk_home=`$OOWINTOOL --jdk-home` 3585 AC_MSG_RESULT([$_jdk_home]) 3586 if test -d "$_jdk_home"; then 3587 with_jdk_home="$_jdk_home" 3588 else 3589 AC_MSG_WARN([$_jdk_home is not a JDK home directory, ignoring it]) 3590 fi 3591 else 3592 with_jdk_home=`cygpath -u "$with_jdk_home"` 3593 fi 3594fi 3595 3596dnl on macOS there is no reliable way to derive JAVA_HOME from the path 3597dnl of the java/javac binaries (the /usr/bin/java* wrappers are no longer 3598dnl symlinks into a JDK, they are dispatcher stubs that shell out to 3599dnl /usr/libexec/java_home), so ask the system tool directly. 3600if test "$_os" = "Darwin"; then 3601 if test -z "$with_jdk_home"; then 3602 AC_MSG_CHECKING([for JDK home]) 3603 _jdk_home=`/usr/libexec/java_home 2>/dev/null` 3604 AC_MSG_RESULT([$_jdk_home]) 3605 if test -d "$_jdk_home"; then 3606 with_jdk_home="$_jdk_home" 3607 else 3608 AC_MSG_WARN([/usr/libexec/java_home did not return a JDK home directory, ignoring it]) 3609 fi 3610 fi 3611fi 3612 3613dnl =================================================================== 3614dnl Checks for java 3615dnl =================================================================== 3616if test "$SOLAR_JAVA" != ""; then 3617 JAVA_HOME=; export JAVA_HOME 3618 if test -z "$with_jdk_home"; then 3619 AC_PATH_PROG(JAVAINTERPRETER, $WITH_JAVA) 3620 else 3621 _java_path="$with_jdk_home/bin/$WITH_JAVA" 3622 dnl Check if there is a java interpreter at all. 3623 if test -x "$_java_path"; then 3624 JAVAINTERPRETER=$_java_path 3625 else 3626 AC_MSG_ERROR([$_java_path not found, please use --with-jdk-home]) 3627 fi 3628 fi 3629 if test "$_os" = "WINNT"; then 3630 if test x`echo "$JAVAINTERPRETER" | $GREP -i '\.exe$'` = x; then 3631 JAVAINTERPRETER="${JAVAINTERPRETER}.exe" 3632 fi 3633 JAVAINTERPRETER=`cygpath -d "$JAVAINTERPRETER"` 3634 JAVAINTERPRETER=`cygpath -u "$JAVAINTERPRETER"` 3635 elif test "$_os" = "Darwin"; then 3636 JAVAIFLAGS="" 3637 fi 3638fi 3639 3640dnl =================================================================== 3641dnl Checks for JDK. 3642dnl =================================================================== 3643if test "$SOLAR_JAVA" != ""; then 3644 _gij_longver=0 3645 AC_MSG_CHECKING([the installed JDK]) 3646 if test -n "$JAVAINTERPRETER"; then 3647 dnl java -version sends output to stderr! 3648 if test `$JAVAINTERPRETER -version 2>&1 | $GREP -c "Kaffe"` -gt 0; then 3649 AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in]) 3650# dnl Kaffe specific tests 3651# KAFFE_VER=`$JAVAINTERPRETER -version 2>&1 | $EGREP " Version:" | $SED -r "s/.* Version: ([[0-9\.]]*).*/\1/"` 3652# if test -z "$KAFFE_VER"; then 3653# AC_MSG_ERROR([looks like Kaffe but version detection failed]) 3654# fi 3655# _kaffe_ver=`echo "$KAFFE_VER" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3656# if test "$_kaffe_ver" -lt 10100; then 3657# AC_MSG_ERROR([Kaffe is too old ($KAFFE_VER - $_kaffe_ver), you need at least 1.1.0]) 3658# fi 3659# JDK=kaffe 3660# 3661# dnl TODO: define some project exclusion variables 3662# 3663# AC_MSG_RESULT([checked (Kaffe $KAFFE_VER)]) 3664# AC_MSG_WARN([EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile]) 3665# echo "EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile" >>warn 3666# JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"` 3667 elif test `$JAVAINTERPRETER --version 2>&1 | $GREP -c "GNU libgcj"` -gt 0; then 3668 JDK=gcj 3669 AC_MSG_RESULT([checked (gcj)]) 3670 _gij_version=`$JAVAINTERPRETER --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 3671 _gij_longver=`echo $_gij_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 3672 3673 elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | $GREP -c "BEA"` -gt 0; then 3674 AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in]) 3675# JDK=bea 3676# 3677# dnl BEA JDK specific tests 3678# _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3679# _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3680# 3681# if test "$_jdk_ver" -lt 10500; then 3682# AC_MSG_ERROR([JDK is too old, you need at least BEA JDK 1.5.0]) 3683# fi 3684# 3685# AC_MSG_RESULT([checked (BEA JDK $_jdk)]) 3686# 3687# if test "$with_jdk_home" = ""; then 3688# AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the BEA JDK, 3689#you must use the "--with-jdk-home" configure option explicitly]) 3690# fi 3691# 3692# AC_MSG_WARN([A bug in certain BEA JREs can prevent you from successfully compiling some modules]) 3693# echo "A bug in certain BEA JREs can prevent you from successfully compiling some modules" >>warn 3694# 3695# JAVA_HOME=$with_jdk_home 3696# 3697 elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | $GREP -c "IBM"` -gt 0; then 3698 JDK=ibm 3699 3700 dnl IBM JDK specific tests 3701 _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3702 _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3703 3704 if test "$_jdk_ver" -lt 10500; then 3705 AC_MSG_ERROR([IBM JDK is too old, you need at least 1.5]) 3706 fi 3707 3708 AC_MSG_RESULT([checked (IBM JDK $_jdk)]) 3709 3710 if test "$with_jdk_home" = ""; then 3711 AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the IBM JDK, 3712you must use the "--with-jdk-home" configure option explicitly]) 3713 fi 3714 3715 JAVA_HOME=$with_jdk_home 3716 3717 else 3718 JDK=sun 3719 3720 dnl SUN JDK specific tests 3721 _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3722 _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3723 3724 if test "$_jdk_ver" -lt 10500; then 3725 AC_MSG_ERROR([JDK is too old, you need at least 1.5]) 3726 fi 3727 AC_MSG_RESULT([checked (JDK $_jdk)]) 3728 JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"` 3729 if test "$_os" = "WINNT"; then 3730 JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"` 3731 fi 3732 if test "$_os" = "OS2"; then 3733 JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"` 3734 fi 3735 fi 3736 else 3737 AC_MSG_ERROR([JAVA not found. You need at least jdk-1.5, or gcj-4]) 3738 fi 3739else 3740 dnl Java disabled 3741 JAVA_HOME=NO_JAVA_HOME ; export JAVA_HOME 3742fi 3743 3744dnl =================================================================== 3745dnl Checks for javac 3746dnl =================================================================== 3747if test "$SOLAR_JAVA" != ""; then 3748 if test "$JDK" = "gcj"; then 3749 javacompiler=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g" | $SED -e "s/java/javac/g"` 3750 else 3751 javacompiler="javac" 3752 fi 3753 if test "$_os" = "WNT" -o "$_os" = "OS2"; then 3754 if test x`echo "$javacompiler" | $GREP -i '\.exe$'` = x; then 3755 javacompiler="${javacompiler}.exe" 3756 fi 3757 fi 3758 if test -z "$with_jdk_home"; then 3759 AC_PATH_PROG(JAVACOMPILER, $javacompiler) 3760 else 3761 _javac_path="$with_jdk_home/bin/$javacompiler" 3762 dnl Check if there is a java compiler at all. 3763 if test -x "$_javac_path"; then 3764 JAVACOMPILER=$_javac_path 3765 fi 3766 fi 3767 if test -z "$JAVACOMPILER"; then 3768 AC_MSG_ERROR([$javacompiler not found, please use --with-jdk-home]) 3769 fi 3770 if test "$_os" = "WINNT"; then 3771 if test x`echo "$JAVACOMPILER" | $GREP -i '\.exe$'` = x; then 3772 JAVACOMPILER="${JAVACOMPILER}.exe" 3773 fi 3774 JAVACOMPILER=`cygpath -d "$JAVACOMPILER"` 3775 JAVACOMPILER=`cygpath -u "$JAVACOMPILER"` 3776 fi 3777 if test "$_os" = "OS2"; then 3778 if test x`echo "$JAVACOMPILER" | $GREP -i '\.exe$'` = x; then 3779 JAVACOMPILER="${JAVACOMPILER}.exe" 3780 fi 3781 fi 3782 3783 if test `$JAVACOMPILER -version 2>&1 | $GREP -c "Eclipse Java Compiler"` -gt 0; then 3784 AC_MSG_CHECKING([re-checking JDK]) 3785 JDK=gcj 3786 AC_MSG_RESULT([checked (ecj)]) 3787 #TODO: what's to do here? some switch to do 1.5 compiling? 3788 JAVAFLAGS="-source 1.5 -target 1.5" 3789 _gij_longver="40200" 3790 fi 3791fi 3792 3793JAVACISGCJ="" 3794dnl =================================================================== 3795dnl Checks that javac is gcj 3796dnl =================================================================== 3797if test "$SOLAR_JAVA" != ""; then 3798 if test `$JAVACOMPILER --version 2>&1 | $GREP -c "GCC"` -gt 0; then 3799 JAVACISGCJ="yes" 3800 fi 3801fi 3802AC_SUBST(JAVACISGCJ) 3803 3804dnl =================================================================== 3805dnl Checks for javadoc 3806dnl =================================================================== 3807if test "$SOLAR_JAVA" != ""; then 3808 if test -z "$with_jdk_home"; then 3809 AC_PATH_PROG(JAVADOC, javadoc) 3810 else 3811 _javadoc_path="$with_jdk_home/bin/javadoc" 3812 if test "$_os" = "WNT" -o "$_os" = "OS2"; then 3813 if test x`echo "$_javadoc_path" | $GREP -i '\.exe$'` = x; then 3814 _javadoc_path="${_javadoc_path}.exe" 3815 fi 3816 fi 3817 dnl Check if there is a javadoc at all. 3818 if test -x "$_javadoc_path"; then 3819 JAVADOC=$_javadoc_path 3820 else 3821 AC_PATH_PROG(JAVADOC, javadoc) 3822 fi 3823 fi 3824 if test -z "$JAVADOC"; then 3825 AC_MSG_ERROR([$_javadoc_path not found, please use --with-jdk-home]) 3826 fi 3827 if test "$_os" = "WINNT"; then 3828 if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then 3829 JAVADOC="${JAVADOC}.exe" 3830 fi 3831 JAVADOC=`cygpath -d "$JAVADOC"` 3832 JAVADOC=`cygpath -u "$JAVADOC"` 3833 fi 3834 if test "$_os" = "OS2"; then 3835 if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then 3836 JAVADOC="${JAVADOC}.exe" 3837 fi 3838 fi 3839fi 3840 3841if test "$SOLAR_JAVA" != ""; then 3842 dnl first check if we have been asked to autodetect JAVA_HOME with a recent gij 3843 if test "$JDK" = "gcj" -a -z "$JAVA_HOME"; then 3844 if test "x$with_jdk_home" = "x" -a "$_gij_longver" -ge "40200"; then 3845 cat > findhome.java <<_ACEOF 3846[import java.io.File; 3847 3848class findhome 3849{ 3850 public static void main(String args[]) 3851 { 3852 String jrelocation = System.getProperty("java.home"); 3853 File jre = new File(jrelocation); 3854 System.out.println(jre.getParent()); 3855 } 3856}] 3857_ACEOF 3858 AC_MSG_CHECKING([if javac works]) 3859 javac_cmd="$JAVACOMPILER findhome.java 1>&2" 3860 AC_TRY_EVAL(javac_cmd) 3861 if test $? = 0 && test -f ./findhome.class ; then 3862 AC_MSG_RESULT([javac works]) 3863 else 3864 echo "configure: javac test failed" >&5 3865 cat findhome.java >&5 3866 AC_MSG_ERROR([javac does not work - java projects will not build!]) 3867 fi 3868 3869 AC_MSG_CHECKING([if gij knows its java.home]) 3870 JAVA_HOME=`$JAVAINTERPRETER findhome` 3871 if test $? = 0 && test "$JAVA_HOME" != "" ; then 3872 AC_MSG_RESULT([$JAVA_HOME]) 3873 else 3874 echo "configure: java test failed" >&5 3875 cat findhome.java >&5 3876 AC_MSG_ERROR([gij does not know its java.home - use --with-jdk-home]) 3877 fi 3878 else 3879 JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*$WITH_JAVA,,p"` 3880 fi 3881 fi 3882 3883 dnl second sanity check JAVA_HOME if possible 3884 if test "$JDK" != "gcj" -o "$_gij_longver" -ge "40200"; then 3885 # check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr 3886 if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then 3887 javac_link_f=`readlink -f "$JAVACOMPILER" 2>/dev/null` 3888 if test $? == 0 && test "$JAVACOMPILER" != "$javac_link_f"; then 3889 # try to recover first by looking whether we have a alternatives 3890 # system as in Debian or newer SuSEs where following /usr/bin/javac 3891 # over /etc/alternatives/javac leads to the right bindir where we 3892 # just need to strip a bit away to get a valid JAVA_HOME 3893 # Solaris 11 is even worse, because target is relative, so use -f 3894 JAVA_HOME="$javac_link_f" 3895 elif readlink $JAVACOMPILER >/dev/null 2>/dev/null; then 3896 # Darwin readlink(1) is so primitive it doesn't even support -f 3897 # maybe only one level of symlink (e.g. on Mac) 3898 JAVA_HOME=`readlink $JAVACOMPILER` 3899 else 3900 # else warn 3901 AC_MSG_WARN([JAVA_HOME is set to /usr - this is very likely to be incorrect]) 3902 AC_MSG_WARN([if this is the case, please inform the correct JAVA_HOME with --with-jdk-home]) 3903 echo "JAVA_HOME is set to /usr - this is very likely to be incorrect" >> warn 3904 echo "if this is the case, please inform the correct JAVA_HOME with --with-jdk-home" >> warn 3905 fi 3906 dnl now that we have the path to the real javac, make a JAVA_HOME out of it.. 3907 if test "$JAVA_HOME" != "/usr"; then 3908 if test "$_os" = "Darwin"; then 3909 dnl Leopard returns a non-suitable path with readlink - points to "Current" only 3910 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/Current/Commands/javac$,/CurrentJDK/Home,) 3911 dnl Tiger already returns a JDK path.. 3912 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/CurrentJDK/Commands/javac$,/CurrentJDK/Home,) 3913 else 3914 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/bin/javac$,,) 3915 fi 3916 fi 3917 fi 3918 # now check if $JAVA_HOME is really valid 3919 if test "$_os" = "Darwin"; then 3920 if test ! -f "$JAVA_HOME/lib/jvm.cfg" -a "x$with_jdk_home" = "x"; then 3921 JAVA_HOME_OK="NO" 3922 fi 3923 elif test ! -d "$JAVA_HOME/jre" -a "x$with_jdk_home" = "x"; then 3924 JAVA_HOME_OK="NO" 3925 fi 3926 if test "$JAVA_HOME_OK" = "NO"; then 3927 AC_MSG_WARN([JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script]) 3928 AC_MSG_WARN([attempted to find JAVA_HOME automatically, but apparently it failed]) 3929 AC_MSG_WARN([in case JAVA_HOME is incorrectly set, some projects with not be built correctly]) 3930 echo "JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script" >> warn 3931 echo "attempted to find JAVA_HOME automatically, but apparently it failed" >> warn 3932 echo "in case JAVA_HOME is incorrectly set, some projects with not be built correctly" >> warn 3933# if test "$JDK" = "gcj"; then 3934# echo "e.g. install java-1.4.2-gcj-compat-devel and use --with-jdk-home=/usr/lib/jvm/java-1.4.2-gcj" >> warn 3935# fi 3936 fi 3937 fi 3938fi 3939 3940AWTLIB= 3941if test "$SOLAR_JAVA" != ""; then 3942 AC_MSG_CHECKING([for jawt lib name]) 3943 if test "$JDK" = "gcj"; then 3944 save_CFLAGS=$CFLAGS 3945 save_LDFLAGS=$LDFLAGS 3946 CFLAGS="$CFLAGS -I$JAVA_HOME/include" 3947 LDFLAGS="$LDFLAGS -L$JAVA_HOME/lib -lgcj" 3948 exec 6>/dev/null # no output 3949 AC_CHECK_HEADER(jni.h, [], 3950 [AC_MSG_ERROR([jni.h could not be found. Mismatch between gcc and libgcj or libgcj-devel missing?])], []) 3951 AC_CHECK_LIB(gcjawt, JAWT_GetAWT, [ AWTLIB="-lgcjawt -lgcj"] ) 3952 exec 6>&1 # output on again 3953 CFLAGS=$save_CFLAGS 3954 LDFLAGS=$save_LDFLAGS 3955 fi 3956 # IBM SDK 1.5.0-sr5 includes libjawt.so with unresolved symbols. 3957 # A workaround is to link also against libpmawt.so 3958 if test "$JDK" = "ibm" ; then 3959 save_CFLAGS=$CFLAGS 3960 save_LDFLAGS=$LDFLAGS 3961 save_LD_LIBRARY_PATH=$LD_LIBRARY_PATH 3962 CFLAGS="$CFLAGS -I$JAVA_HOME/include" 3963 if test "$_os" = "Darwin"; then 3964 dnl jni_md.h lives in a platform-specific subdirectory on macOS, 3965 dnl matching the layout set up for the real build in set_soenv.in 3966 CFLAGS="$CFLAGS -I$JAVA_HOME/include/darwin" 3967 fi 3968 LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin" 3969 LD_LIBRARY_PATH=$JAVA_HOME/jre/bin:$JAVA_HOME/jre/bin/classic:$JAVA_HOME/jre/bin/xawt:$LD_LIBRARY_PATH 3970 export LD_LIBRARY_PATH 3971 exec 6>/dev/null # no output 3972 AC_CHECK_HEADER(jni.h, [], 3973 [AC_MSG_ERROR([jni.h could not be found.])], []) 3974 AC_CHECK_LIB(jawt, JAWT_GetAWT, [ AWTLIB="-ljawt"] ) 3975 if test -z "$AWTLIB"; then 3976 LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin/xawt -ljawt" 3977 AC_CHECK_LIB(mawt, JAWT_GetAWT, [ AWTLIB="-L$JAVA_HOME/jre/bin/xawt -ljawt -lmawt"]) 3978 fi 3979 exec 6>&1 # output on again 3980 CFLAGS=$save_CFLAGS 3981 LDFLAGS=$save_LDFLAGS 3982 LD_LIBRARY_PATH=$save_LD_LIBRARY_PATH 3983 fi 3984 if test -z "$AWTLIB"; then 3985 AWTLIB=-ljawt 3986 fi 3987 AC_MSG_RESULT([$AWTLIB]) 3988 AC_SUBST(AWTLIB) 3989fi 3990 3991dnl =================================================================== 3992dnl Check for optional gcj for AOT 3993dnl =================================================================== 3994if test "$SOLAR_JAVA" != ""; then 3995 AC_MSG_CHECKING([whether to enable gcj aot compilation]) 3996 if test -n "$enable_gcjaot" && test "$enable_gcjaot" != "no"; then 3997 AC_MSG_RESULT([yes]) 3998 if test `echo $WITH_JAVA | $GREP -c "gij"` -eq 0; then 3999 gcjaot="gcj" 4000 else 4001 gcjaot=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g"` 4002 fi 4003 AC_MSG_RESULT([$gcjaot]) 4004 if test -n "$with_jdk_home"; then 4005 _javac_path="$with_jdk_home/bin/$gcjaot" 4006 dnl Check if there is a gcj at all. 4007 if test -x "$_javac_path"; then 4008 JAVAAOTCOMPILER=$_javac_path 4009 fi 4010 fi 4011 if test -z "$JAVAAOTCOMPILER"; then 4012 AC_PATH_PROG(JAVAAOTCOMPILER, $gcjaot) 4013 fi 4014 if test -z "$JAVAAOTCOMPILER"; then 4015 AC_MSG_WARN([$gcjaot not found, please use --with-jdk-home]) 4016 fi 4017 else 4018 AC_MSG_RESULT([no]) 4019 fi 4020fi 4021 4022AC_SUBST(JAVA_HOME) 4023AC_SUBST(JDK) 4024AC_SUBST(JAVAFLAGS) 4025AC_SUBST(JAVAINTERPRETER) 4026AC_SUBST(JAVAIFLAGS) 4027AC_SUBST(JAVACOMPILER) 4028AC_SUBST(JAVAAOTCOMPILER) 4029AC_SUBST(JAVADOC) 4030 4031dnl =================================================================== 4032dnl Checks for specific files. 4033dnl =================================================================== 4034 4035dnl =================================================================== 4036dnl Checks for programs. 4037dnl =================================================================== 4038 4039dnl EPM is not needed for Windows, or when every requested package format is 4040dnl handled directly by the simple packager (installer/simplepackage.pm) 4041dnl rather than by EPM: "archive"/"installed" on any platform, and Darwin's 4042dnl "dmg" - including the empty default, which resolves to "dmg" on Darwin 4043dnl below. simplepackage.pm never invokes EPM for any of these three, so 4044dnl requiring EPM to be present for e.g. a plain "dmg" or "archive dmg" 4045dnl build serves no purpose. 4046need_epm_for_packaging=yes 4047if test "$_os" = "WINNT"; then 4048 need_epm_for_packaging=no 4049elif test "$with_package_format" = "archive" -o "$with_package_format" = "installed"; then 4050 need_epm_for_packaging=no 4051elif test "$_os" = "Darwin"; then 4052 need_epm_for_packaging=no 4053 for pkgformat_word in $with_package_format; do 4054 case "$pkgformat_word" in 4055 archive|installed|dmg) ;; 4056 *) need_epm_for_packaging=yes ;; 4057 esac 4058 done 4059fi 4060 4061AC_MSG_CHECKING([whether to enable EPM for packing]) 4062if test "$enable_epm" = "yes"; then 4063 AC_MSG_RESULT([yes]) 4064 dnl ================================================================================ 4065 dnl Check for epm - not needed for Windows, or when the requested package 4066 dnl format(s) are all handled without it (see need_epm_for_packaging above) 4067 dnl ================================================================================ 4068 if test "$need_epm_for_packaging" = "yes"; then 4069 if test -n "$with_epm"; then 4070 EPM=$with_epm 4071 else 4072 AC_PATH_PROG(EPM, epm, no) 4073 fi 4074 4075 # Override system epm and --with-epm if --with-epm-url is used. 4076 if test -n "$with_epm_url" ; then 4077 # At this moment we can not verify the URL or the content that we want to download. 4078 EPM_URL=$with_epm_url 4079 AC_MSG_RESULT([epm will be downloaded and compiled in bootstrap]) 4080 EPM= 4081 echo "EPM will be built." 4082 BUILD_EPM=YES 4083 BUILD_TYPE="$BUILD_TYPE EPM" 4084 else 4085 if test "$EPM" = "no" ; then 4086 AC_MSG_ERROR([no. Install ESP Package Manager (EPM) (https://jimjag.github.io/epm/) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-5.0.0 (or later) source package (--with-epm-url); run configure with the --help option for a list of possible URLs.]) 4087 else 4088 # Gentoo has some epm which is something different... 4089 AC_MSG_CHECKING([whether the found EPM is the right EPM]) 4090 if $EPM --version | $GREP "ESP Package Manager" >/dev/null 2>/dev/null; then 4091 AC_MSG_RESULT([yes]) 4092 else 4093 AC_MSG_ERROR([no. Install ESP Package Manager (https://jimjag.github.io/epm/) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-5.0.0 (or later) source package (--with-epm-url); run configure with the --help option for a list of possible URLs.]) 4094 fi 4095 AC_MSG_CHECKING([EPM version]) 4096 EPM_VERSION=`$EPM --version | $GREP 'ESP Package Manager' | cut -d' ' -f5 | $SED -e s/v//` 4097 if test "`echo $EPM_VERSION | cut -d'.' -f1`" -ge "5"; then 4098 AC_MSG_RESULT([OK, >= 5.0]) 4099 BUILD_EPM=NO 4100 else 4101 AC_MSG_ERROR([too old. EPM >= 5.0.0 is required.]) 4102 fi 4103 fi 4104 fi 4105 fi 4106 4107 # test which package format to use 4108 AC_MSG_CHECKING([which package format to use]) 4109 4110 # defaults 4111 case "$_os" in 4112 OS2) 4113 PKGFORMAT=native 4114 ;; 4115 Darwin) 4116 PKGFORMAT=dmg 4117 ;; 4118 SunOS) 4119 PKGFORMAT=pkg 4120 ;; 4121 Linux) 4122 # if building on Debian, default should be deb... 4123 if test -e /etc/debian_version; then 4124 PKGFORMAT=deb 4125 else 4126 PKGFORMAT=rpm 4127 fi 4128 ;; 4129 AIX) 4130 PKGFORMAT=aix 4131 ;; 4132 *BSD) 4133 PKGFORMAT=bsd 4134 ;; 4135 OSF1) 4136 PKGFORMAT=setld 4137 ;; 4138 WINNT) 4139 PKGFORMAT=msi 4140 ;; 4141 # we never should get here since we check the architecture/os at the beginning, 4142 # but go sure... 4143 *) 4144 AC_MSG_ERROR([unknown system]) 4145 esac 4146 if test -n "$with_package_format"; then 4147 for i in $with_package_format; do 4148 case "$i" in 4149 aix | bsd | deb | inst | tardist | osx | pkg | rpm | setld | native | portable | archive | dmg | installed | msi) 4150 ;; 4151 *) 4152 AC_MSG_ERROR([unsupported format $i. Supported by EPM are: 4153aix - AIX software distribution 4154bsd - FreeBSD, NetBSD, or OpenBSD software distribution 4155depot or swinstall - HP-UX software distribution 4156deb - Debian software distribution 4157inst or tardist - IRIX software distribution 4158osx - MacOS X software distribution 4159pkg - Solaris software distribution 4160rpm - RedHat software distribution 4161setld - Tru64 (setld) software distribution 4162native - "Native" software distribution for the platform 4163portable - Portable software distribution 4164AOO additionally supports: 4165archive - .tar.gz or .zip 4166dmg - Mac OS X .dmg 4167installed - installation tree 4168msi - Windows .msi 4169 ]) 4170 ;; 4171 esac 4172 done 4173 PKGFORMAT="$with_package_format" 4174 fi 4175 AC_MSG_RESULT([$PKGFORMAT]) 4176 if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null; then 4177 AC_MSG_CHECKING([for rpm]) 4178 for a in "$RPM" rpmbuild rpm; do 4179 $a --usage >/dev/null 2> /dev/null 4180 if test $? -eq 0; then 4181 RPM=$a 4182 break 4183 else 4184 $a --version >/dev/null 2> /dev/null 4185 if test $? -eq 0; then 4186 RPM=$a 4187 break 4188 fi 4189 fi 4190 done 4191 if test -z "$RPM" ; then 4192 AC_MSG_ERROR([not found]) 4193 elif "$RPM" --usage 2>&1 | $EGREP -- -bb >/dev/null; then 4194 RPM_PATH=`which $RPM` 4195 AC_MSG_RESULT([$RPM_PATH]) 4196 else 4197 AC_MSG_ERROR([cannot build packages. Try installing rpmbuild.]) 4198 fi 4199 fi 4200 if echo "$PKGFORMAT" | $EGREP deb 2>&1 >/dev/null; then 4201 AC_PATH_PROG(DPKG, dpkg, no) 4202 if test "$DPKG" = "no"; then 4203 AC_MSG_ERROR([dpkg needed for deb creation. Install dpkg.]) 4204 fi 4205 AC_PATH_PROG(FAKEROOT, fakeroot, no) 4206 if test "$FAKEROOT" = "no"; then 4207 AC_MSG_ERROR([fakeroot needed for deb creation. Install fakeroot.]) 4208 fi 4209 fi 4210 if echo "$PKGFORMAT" | $EGREP osx 2>&1 >/dev/null; then 4211 if test "$_os" = "Darwin"; then 4212 AC_MSG_CHECKING([for PackageMaker availability]) 4213 if ! test -x /Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker; then 4214 AC_MSG_ERROR([not installed. Apple's PackageMaker does not exist on 4215current Xcode; the "osx" EPM format is obsolete on this platform - use "dmg" 4216instead, or see MACOS_PACKAGING_EPM_REVIEW.md for a modern product-PKG path.]) 4217 else 4218 AC_MSG_RESULT([ok]) 4219 fi 4220 else 4221 AC_MSG_ERROR([PackageMaker needed to build OSX packages and you are not on OSX...]) 4222 fi 4223 fi 4224 if echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then 4225 AC_PATH_PROG(PKGMK, pkgmk, no) 4226 if test "$PKGMK" = "no"; then 4227 AC_MSG_ERROR([pkgmk needed for Solaris pkg creation. Install it.]) 4228 fi 4229 fi 4230 AC_SUBST(RPM) 4231 AC_SUBST(DPKG) 4232 AC_SUBST(FAKEROOT) 4233 AC_SUBST(PKGMK) 4234else 4235 AC_MSG_RESULT([no]) 4236 BUILD_EPM=NO 4237 EPM=NO 4238 if test "$_os" = "Darwin" -a "$need_epm_for_packaging" = "no"; then 4239 dnl simplepackage.pm builds archive/installed/dmg without EPM, so 4240 dnl --disable-epm should not discard a requested "dmg" (or Darwin's 4241 dnl "dmg" default) the way it must for a format that does need EPM. 4242 PKGFORMAT=dmg 4243 test -z "$with_package_format" || PKGFORMAT="$with_package_format" 4244 else 4245 PKGFORMAT=native 4246 fi 4247fi 4248AC_SUBST(BUILD_EPM) 4249AC_SUBST(EPM_URL) 4250AC_SUBST(EPM) 4251AC_SUBST(PKGFORMAT) 4252 4253dnl =================================================================== 4254dnl Check for gperf 4255dnl =================================================================== 4256AC_PATH_PROG(GPERF, gperf) 4257if test -z "$with_gperf"; then 4258 AC_PATH_PROG(GPERF, gperf) 4259 if test -z "$GPERF"; then 4260 AC_MSG_ERROR([gperf not found but needed. Install it and/or specify --with-gperf=/path/to/it.]) 4261 fi 4262else 4263 if test -x "$with_gperf"; then 4264 GPERF=$with_gperf 4265 else 4266 AC_MSG_ERROR([--with-gperf did not point to an executable]) 4267 fi 4268fi 4269AC_MSG_CHECKING([gperf version]) 4270if test "`$GPERF --version | $EGREP ^GNU\ gperf | $AWK '{ print $3 }' | cut -d. -f1`" -ge "3"; then 4271 AC_MSG_RESULT([OK]) 4272 GPERF=$GPERF 4273else 4274 AC_MSG_ERROR([too old, you need at least 3.0.0]) 4275fi 4276AC_SUBST(GPERF) 4277 4278dnl =================================================================== 4279dnl Check for building ODK 4280dnl =================================================================== 4281AC_MSG_CHECKING([whether to build the ODK]) 4282if test "z$enable_odk" = "z" -o "$enable_odk" != "no"; then 4283 AC_MSG_RESULT([yes]) 4284 if test "$WITH_JAVA" != "no"; then 4285 AC_MSG_CHECKING([for external/unowinreg/unowinreg.dll]) 4286 if ! test -f "./external/unowinreg/unowinreg.dll"; then 4287 HAVE_UNOWINREG_DLL=no 4288 else 4289 HAVE_UNOWINREG_DLL=yes 4290 fi 4291 if test "$HAVE_UNOWINREG_DLL" = "yes"; then 4292 AC_MSG_RESULT([found]) 4293 BUILD_UNOWINREG=NO 4294 else 4295 if test "$_os" = "WINNT"; then 4296 AC_MSG_RESULT([not found, will be built]) 4297 else 4298 AC_MSG_WARN([not found, will be cross-built using mingw32]) 4299 fi 4300 BUILD_UNOWINREG=YES 4301 fi 4302 if test "$_os" != "WINNT" && test "$BUILD_UNOWINREG" = "YES"; then 4303 if test -z "$WITH_MINGWIN" || test "$WITH_MINGWIN" = "0"; then 4304 AC_MSG_ERROR([for rebuilding unowinreg.dll you need the mingw32 C++ compiler. 4305 Specify mingw32 g++ executable name with --with-mingwin. 4306 Or use prebuilt one from https://tools.openoffice.org/unowinreg_prebuild/680/ and 4307 put it into external/unowinreg using your browser or a command equivalent to: 4308 wget -O external/unowinreg/unowinreg.dll https://www.openoffice.org/tools/unowinreg_prebuild/680/unowinreg.dll]) 4309 fi 4310 if echo "$WITH_MINGWIN" | $EGREP -q "/"; then 4311 if ! test -x "$WITH_MINGWIN"; then MINGWCXX=false; else MINGWCXX=`basename $WITH_MINGWIN`; fi 4312 else 4313 AC_CHECK_TOOL(MINGWCXX, $WITH_MINGWIN, false) 4314 fi 4315 if test "$MINGWCXX" = "false"; then 4316 AC_MSG_ERROR(specified MinGW32 C++ cross-compiler not found. Install it or correct name.) 4317 fi 4318 AC_MSG_CHECKING(whether we are using the MinGW32 cross C++ compiler) 4319 if ! echo "`$MINGWCXX -dumpmachine`" | $GREP -q mingw32; then 4320 AC_MSG_ERROR(no) 4321 else 4322 AC_MSG_RESULT(yes) 4323 fi 4324 if echo "$WITH_MINGWIN" | $EGREP -q "/"; then 4325 if ! test -x "`echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`"; then MINGWSTRIP=false; else MINGWSTRIP=$(basename $(echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/)); fi 4326 else 4327 AC_CHECK_TOOL(MINGWSTRIP, `echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`, false) 4328 fi 4329 if test "$MINGWSTRIP" = "false"; then 4330 AC_MSG_ERROR(MinGW32 binutils needed. Install them.) 4331 fi 4332 AC_LANG_PUSH([C++]) 4333 save_CXX=$CXX 4334 save_CXXCPP=$CXXCPP 4335 CXX=$MINGWCXX 4336 CXXCPP="$MINGWCXX -E" 4337 save_CXXFLAGS=$CXXFLAGS 4338 save_CPPFLAGS=$CPPFLAGS 4339 CXXFLAGS="$CXXFLAGS -I$JAVA_HOME/include" 4340 CPPFLAGS="$CPPFLAGS -I$JAVA_HOME/include" 4341 # LIBS contains -lcrypt etc due to the AC_CHECK_LIBS which obviously 4342 # do not make sense here (and 'd make the check fail) 4343 save_LIBS=$LIBS 4344 LIBS="" 4345 AC_CHECK_LIB([kernel32],[main],[],[],[])ac_cv_lib_kernel32=ac_cv_lib_kernel32_main 4346 4347 AC_CHECK_LIB([advapi32],[main],[],[],[])ac_cv_lib_advapi32=ac_cv_lib_advapi32_main 4348 4349 AC_CHECK_HEADER(windows.h, [], [AC_MSG_ERROR([windows.h missing])]) 4350 CXXFLAGS=$save_CXXFLAGS 4351 CPPFLAGS=$save_CPPFLAGS 4352 CXX=$save_CXX 4353 CXXCPP=$save_CXXCPP 4354 LIBS=$save_LIBS 4355 AC_LANG_POP([C++]) 4356 fi 4357 fi 4358 BUILD_TYPE="$BUILD_TYPE ODK" 4359else 4360 AC_MSG_RESULT([no]) 4361 BUILD_UNOWINREG=NO 4362fi 4363AC_SUBST(BUILD_UNOWINREG) 4364AC_SUBST(MINGWCXX) 4365AC_SUBST(MINGWSTRIP) 4366 4367dnl =================================================================== 4368dnl Check for system stdlibs 4369dnl =================================================================== 4370AC_MSG_CHECKING([whether to provide libstdc++/libgcc_s in the installset]) 4371if test -n "$with_system_stdlibs" -o -n "$with_system_libs" && \ 4372 test "$with_system_stdlibs" != "no"; then 4373 AC_MSG_RESULT([no]) 4374 SYSTEM_STDLIBS=YES 4375else 4376 AC_MSG_RESULT([yes]) 4377 SYSTEM_STDLIBS=NO 4378fi 4379AC_SUBST(SYSTEM_STDLIBS) 4380 4381dnl =================================================================== 4382dnl Check for system zlib 4383dnl =================================================================== 4384if test "$_os" = "Darwin" && test "$with_system_zlib" != "no"; then 4385 with_system_zlib=yes 4386fi 4387AC_MSG_CHECKING([which zlib to use]) 4388if test -n "$with_system_zlib" -o -n "$with_system_libs" && \ 4389 test "$with_system_zlib" != "no"; then 4390 AC_MSG_RESULT([external]) 4391 SYSTEM_ZLIB=YES 4392 AC_CHECK_HEADER(zlib.h, [], 4393 [AC_MSG_ERROR(zlib.h not found. install zlib)], []) 4394 AC_CHECK_LIB(z, deflate, [ ZLIB=-lz ], 4395 [AC_MSG_ERROR(zlib not found or functional)], []) 4396else 4397 AC_MSG_RESULT([internal]) 4398 SYSTEM_ZLIB=NO 4399 BUILD_TYPE="$BUILD_TYPE ZLIB" 4400fi 4401AC_SUBST(SYSTEM_ZLIB) 4402 4403dnl =================================================================== 4404dnl Check for system jpeg 4405dnl =================================================================== 4406AC_MSG_CHECKING([which jpeg to use]) 4407if test -n "$with_system_jpeg" -o -n "$with_system_libs" && \ 4408 test "$with_system_jpeg" != "no"; then 4409 AC_MSG_RESULT([external]) 4410 SYSTEM_JPEG=YES 4411 AC_CHECK_HEADER(jpeglib.h, [], 4412 [AC_MSG_ERROR(jpeg.h not found. install libjpeg)], []) 4413 AC_CHECK_LIB(jpeg, jpeg_resync_to_restart, [ JPEG3RDLIB=-ljpeg ], 4414 [AC_MSG_CHECKING(jpeg library not found or functional)], []) 4415else 4416 AC_MSG_RESULT([internal]) 4417 SYSTEM_JPEG=NO 4418 BUILD_TYPE="$BUILD_TYPE JPEG" 4419fi 4420AC_SUBST(SYSTEM_JPEG) 4421 4422dnl =================================================================== 4423dnl Check for system expat 4424dnl =================================================================== 4425AC_MSG_CHECKING([which expat to use]) 4426if test -n "$with_system_expat" -o -n "$with_system_libs" && \ 4427 test "$with_system_expat" != "no"; then 4428 AC_MSG_RESULT([external]) 4429 SYSTEM_EXPAT=YES 4430 AC_CHECK_HEADER(expat.h, [], 4431 [AC_MSG_ERROR(expat.h not found. install expat)], []) 4432 AC_CHECK_LIB(expat, XML_ParserCreate, [], 4433 [AC_MSG_RESULT(expat library not found or functional.)], []) 4434else 4435 AC_MSG_RESULT([internal]) 4436 SYSTEM_EXPAT=NO 4437 BUILD_TYPE="$BUILD_TYPE EXPAT" 4438fi 4439AC_SUBST(SYSTEM_EXPAT) 4440 4441dnl =================================================================== 4442dnl Check whether freetype is available 4443dnl =================================================================== 4444if test "$test_freetype" = "yes"; then 4445 AC_MSG_CHECKING([whether freetype is available]) 4446 PKG_CHECK_MODULES( FREETYPE, freetype2 >= 2.0 ) 4447fi 4448AC_SUBST(FREETYPE_CFLAGS) 4449AC_SUBST(FREETYPE_LIBS) 4450 4451dnl =================================================================== 4452dnl Check whether freetype2 supports emboldening 4453dnl =================================================================== 4454if test "$test_freetype" = "yes"; then 4455 save_CPPFLAGS="$CPPFLAGS" 4456 save_LDFLAGS="$LDFLAGS" 4457 save_LIBS="$LIBS" 4458 CPPFLAGS="$CPPFLAGS $FREETYPE_CFLAGS" 4459 LDFLAGS="$LDFLAGS $FREETYPE_LIBS" 4460 AC_CHECK_LIB(freetype, FT_GlyphSlot_Embolden, 4461 [USE_FT_EMBOLDEN="YES"], [USE_FT_EMBOLDEN="NO"], []) 4462 LDFLAGS="$save_LDFLAGS" 4463 CPPFLAGS="$save_CPPFLAGS" 4464 LIBS="$save_LIBS" 4465fi 4466AC_SUBST(USE_FT_EMBOLDEN) 4467 4468if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \ 4469 test "$with_system_libxslt" != "no"; then 4470 if test -z "$with_system_libxml" -a -z "$with_system_libs" || \ 4471 test "$with_system_libxml" = "no"; then 4472 # somehow AC_MSG_WARN won't work... 4473 echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml" 4474 echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml" >> warn 4475 with_system_libxml=yes 4476 fi 4477fi 4478if test -n "$with_system_libxml" -o -n "$with_system_libs" && \ 4479 test "$with_system_libxml" != "no"; then 4480 if test -z "$with_system_libxslt" -a -z "$with_system_libs" || \ 4481 test "$with_system_libxslt" = "no"; then 4482 # somehow AC_MSG_WARN won't work... 4483 echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt" 4484 echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt" >> warn 4485 with_system_libxslt=yes 4486 fi 4487fi 4488 4489dnl =================================================================== 4490dnl Check for system libxslt 4491dnl =================================================================== 4492AC_MSG_CHECKING([which libxslt to use]) 4493if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \ 4494 test "$with_system_libxslt" != "no"; then 4495 AC_MSG_RESULT([external]) 4496 SYSTEM_LIBXSLT=YES 4497 4498 if test "$_os" != "Darwin"; then 4499 PKG_CHECK_MODULES(LIBXSLT, libxslt) 4500 else 4501 dnl See the matching libxml check below for why this pins 4502 dnl xslt-config to the directory given to --with-system-libxslt 4503 dnl instead of resolving a bare "xslt-config" off PATH. 4504 if test "$with_system_libxslt" != "yes" -a -n "$with_system_libxslt"; then 4505 XSLT_CONFIG="$with_system_libxslt/bin/xslt-config" 4506 if test ! -x "$XSLT_CONFIG"; then 4507 AC_MSG_ERROR([--with-system-libxslt=$with_system_libxslt given, but $XSLT_CONFIG not found or not executable]) 4508 fi 4509 else 4510 AC_PATH_PROG(XSLT_CONFIG, xslt-config, []) 4511 if test -z "$XSLT_CONFIG"; then 4512 AC_MSG_ERROR([xslt-config not found on PATH]) 4513 fi 4514 fi 4515 LIBXSLT_CFLAGS=`$XSLT_CONFIG --cflags` 4516 LIBXSLT_LIBS=`$XSLT_CONFIG --libs` 4517 LIBXSLT_PREFIX=`$XSLT_CONFIG --prefix` 4518 fi 4519 4520 dnl Check for xsltproc 4521 AC_PATH_PROG(XSLTPROC, xsltproc, no) 4522 if test "$XSLTPROC" = "no"; then 4523 AC_MSG_ERROR([xsltproc is required]) 4524 fi 4525else 4526 AC_MSG_RESULT([internal]) 4527 SYSTEM_LIBXSLT=NO 4528 BUILD_TYPE="$BUILD_TYPE LIBXSLT" 4529fi 4530AC_SUBST(SYSTEM_LIBXSLT) 4531AC_SUBST(LIBXSLT_CFLAGS) 4532AC_SUBST(LIBXSLT_LIBS) 4533AC_SUBST(LIBXSLT_PREFIX) 4534 4535 4536dnl =================================================================== 4537dnl Check for system libxml 4538dnl =================================================================== 4539AC_MSG_CHECKING([which libxml to use]) 4540if test -n "$with_system_libxml" -o -n "$with_system_libs" && \ 4541 test "$with_system_libxml" != "no"; then 4542 AC_MSG_RESULT([external]) 4543 SYSTEM_LIBXML=YES 4544 BUILD_TYPE="$BUILD_TYPE LIBXMLSEC" 4545 4546 if test "$_os" != "Darwin"; then 4547 PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.0) 4548 else 4549 dnl A bare "xml2-config" resolves off whatever happens to be 4550 dnl first on PATH, which is ambiguous when several package 4551 dnl managers each ship their own libxml2 (MacPorts, Homebrew, 4552 dnl a hand-built static copy, ...). When --with-system-libxml 4553 dnl is given an actual directory (not just a bare "yes"), pin 4554 dnl xml2-config to that prefix explicitly so the intended copy 4555 dnl can't be shadowed by PATH order. 4556 if test "$with_system_libxml" != "yes" -a -n "$with_system_libxml"; then 4557 XML2_CONFIG="$with_system_libxml/bin/xml2-config" 4558 if test ! -x "$XML2_CONFIG"; then 4559 AC_MSG_ERROR([--with-system-libxml=$with_system_libxml given, but $XML2_CONFIG not found or not executable]) 4560 fi 4561 else 4562 AC_PATH_PROG(XML2_CONFIG, xml2-config, []) 4563 if test -z "$XML2_CONFIG"; then 4564 AC_MSG_ERROR([xml2-config not found on PATH]) 4565 fi 4566 fi 4567 LIBXML_CFLAGS=`$XML2_CONFIG --cflags` 4568 LIBXML_LIBS=`$XML2_CONFIG --libs` 4569 LIBXML_PREFIX=`$XML2_CONFIG --prefix` 4570 fi 4571else 4572 AC_MSG_RESULT([internal]) 4573 SYSTEM_LIBXML=NO 4574 BUILD_TYPE="$BUILD_TYPE LIBXML2 LIBXMLSEC" 4575fi 4576AC_SUBST(SYSTEM_LIBXML) 4577AC_SUBST(SYSTEM_LIBXML_STATIC) 4578AC_SUBST(LIBXML_CFLAGS) 4579AC_SUBST(LIBXML_LIBS) 4580AC_SUBST(LIBXML_PREFIX) 4581 4582 4583dnl =================================================================== 4584dnl Checks for a MacOS platform SDK compatible with deployment target 4585dnl =================================================================== 4586if test "$_os" = "Darwin"; then 4587 sdk_target=$with_macosx_target 4588 AC_MSG_CHECKING([checking SDK compatibility with OSX $sdk_target]) 4589 4590 sdk_major=`echo $sdk_target | cut -d"." -f1` 4591 sdk_minor=`echo $sdk_target | cut -d"." -f2` 4592 test -z "$sdk_minor" && sdk_minor=0 4593 4594 dnl Minimum supported macOS deployment target is 11.0 (Big Sur). This is 4595 dnl also the hard floor for Apple Silicon (arm64), so enforce it for every 4596 dnl architecture. 4597 if test "$sdk_major" -lt "11" ; then 4598 AC_MSG_ERROR([macOS deployment target < 11.0 is no longer supported; use --with-macosx-target=11.0 or later]) 4599 else 4600 MACOSX_DEPLOYMENT_TARGET=$sdk_target 4601 sdk_path=$with_macosx_sdk 4602 if test -z "$sdk_path"; then 4603 dnl --macosx-sdk not used (or blank): We look for the SDK. 4604 dnl Prefer xcodebuild when full Xcode is installed, but fall back 4605 dnl to xcrun so that Command Line Tools-only setups also work 4606 dnl (xcodebuild is unavailable without the full Xcode app). 4607 sdk_found=`xcodebuild -showsdks 2>/dev/null | $EGREP "sdk macosx(1[1-9]|[2-9][0-9])" | sed -e "s/.*sdk //" | tail -n1` 4608 if test -n "$sdk_found"; then 4609 AC_MSG_RESULT([yes, by using SDK $sdk_found]) 4610 sdk_path=`xcodebuild -version -sdk ${sdk_found} Path` 4611 else 4612 sdk_path=`xcrun --sdk macosx --show-sdk-path 2>/dev/null` 4613 if test -z "$sdk_path"; then 4614 AC_MSG_ERROR([No SDK with OSX $sdk_target compatibility found]) 4615 fi 4616 AC_MSG_RESULT([yes, by using SDK at $sdk_path]) 4617 fi 4618 elif test ! -d "$sdk_path"; then 4619 dnl --macosx-sdk=<version> given (not a path): resolve it. Prefer 4620 dnl xcodebuild, but fall back to xcrun so Command Line Tools-only 4621 dnl setups (no full Xcode) also work. 4622 sdk_found=`xcodebuild -showsdks 2>/dev/null | $EGREP "sdk macosx${sdk_path}" | sed -e "s/.*sdk //" | tail -n1` 4623 if test -n "$sdk_found"; then 4624 AC_MSG_RESULT([SDK $sdk_found]) 4625 sdk_path=`xcodebuild -version -sdk ${sdk_found} Path` 4626 else 4627 sdk_xcrun=`xcrun --sdk macosx${sdk_path} --show-sdk-path 2>/dev/null` 4628 if test -z "$sdk_xcrun"; then 4629 AC_MSG_ERROR([SDK macosx${sdk_path} not found]) 4630 fi 4631 AC_MSG_RESULT([SDK at $sdk_xcrun]) 4632 sdk_path=$sdk_xcrun 4633 fi 4634 fi 4635 AC_MSG_CHECKING([for $sdk_path]) 4636 if test -d "$sdk_path"; then 4637 AC_MSG_RESULT([yes]) 4638 else 4639 AC_MSG_ERROR([not found!]) 4640 fi 4641 4642 MACOSX_SDK_PATH=$sdk_path 4643 SDKROOT=$sdk_path 4644 export SDKROOT 4645 fi 4646 4647fi 4648dnl Code signing during packaging: solenv/bin/modules/installer/simplepackage.pm 4649dnl reads these from the environment (via set_soenv), so a bare "yes" is an error. 4650MACOSX_CODESIGNING_IDENTITY= 4651MACOSX_CODESIGNING_KEYCHAIN= 4652MACOSX_NOTARY_PROFILE= 4653if test "$with_macosx_codesigning_identity" = "yes"; then 4654 AC_MSG_ERROR([--with-macosx-codesigning-identity needs a codesign identity, or "-" for ad-hoc]) 4655fi 4656if test -n "$with_macosx_codesigning_identity" -a "$with_macosx_codesigning_identity" != "no"; then 4657 MACOSX_CODESIGNING_IDENTITY=$with_macosx_codesigning_identity 4658fi 4659if test -n "$with_macosx_codesigning_keychain" -a "$with_macosx_codesigning_keychain" != "no" -a "$with_macosx_codesigning_keychain" != "yes"; then 4660 MACOSX_CODESIGNING_KEYCHAIN=$with_macosx_codesigning_keychain 4661fi 4662if test "$with_macosx_notary_profile" = "yes"; then 4663 AC_MSG_ERROR([--with-macosx-notary-profile needs a notarytool keychain profile name]) 4664fi 4665if test -n "$with_macosx_notary_profile" -a "$with_macosx_notary_profile" != "no"; then 4666 if test "$MACOSX_CODESIGNING_IDENTITY" = "" -o "$MACOSX_CODESIGNING_IDENTITY" = "-"; then 4667 AC_MSG_ERROR([--with-macosx-notary-profile needs --with-macosx-codesigning-identity set to a real Developer ID identity, not ad-hoc]) 4668 fi 4669 MACOSX_NOTARY_PROFILE=$with_macosx_notary_profile 4670fi 4671AC_SUBST(MACOSX_DEPLOYMENT_TARGET) 4672AC_SUBST(MACOSX_SDK_PATH) 4673AC_SUBST(SDKROOT) 4674AC_SUBST(MACOSX_CODESIGNING_IDENTITY) 4675AC_SUBST(MACOSX_CODESIGNING_KEYCHAIN) 4676AC_SUBST(MACOSX_NOTARY_PROFILE) 4677 4678 4679dnl =================================================================== 4680dnl Check for system python 4681dnl =================================================================== 4682AC_MSG_CHECKING([which python to use]) 4683if test "$_os" = "Darwin" && \ 4684 test -n "$with_system_python" -o -n "$with_system_libs" && \ 4685 test "$with_system_python" != "no"; then 4686 with_system_python=yes 4687 4688 dnl Recent macOS releases no longer ship a usable Python under /usr/bin, 4689 dnl and even when python3 exists there it may be Apple's old CLT stub 4690 dnl (< 3.11). Probe the locations where a system/user Python is typically 4691 dnl found - the python.org framework build, Homebrew (Apple Silicon and 4692 dnl Intel), and whatever python3 is first on PATH (MacPorts/pyenv/etc.) - 4693 dnl and pick the first candidate that actually satisfies the 3.11 floor. 4694 dnl hex version of Python 3.11.0 = 51118080 4695 _python="" 4696 for _python_candidate in \ 4697 "/Library/Frameworks/Python.framework/Versions/Current/bin/python3" \ 4698 "/Library/Frameworks/Python.framework/Versions/Current/bin/python" \ 4699 "/opt/homebrew/bin/python3" \ 4700 "/usr/local/bin/python3" \ 4701 `command -v python3 2>/dev/null` \ 4702 "/usr/bin/python3" \ 4703 "/usr/bin/python" ; do 4704 if test -x "$_python_candidate"; then 4705 _python_candidate_hexversion=`$_python_candidate -c "import sys; print(sys.hexversion)" 2>/dev/null` 4706 if test -n "$_python_candidate_hexversion" && \ 4707 test "$_python_candidate_hexversion" -ge 51118080 2>/dev/null; then 4708 _python="$_python_candidate" 4709 break 4710 fi 4711 fi 4712 done 4713 if test -z "$_python"; then 4714 AC_MSG_ERROR([Python 3.11 or higher is required; install it (e.g. from python.org or Homebrew), or configure with --without-system-python]) 4715 fi 4716 4717 _python_version=`$_python -c "import sys; print(sys.version);" | head -c 4` 4718 AC_MSG_RESULT([compiling against system python ($_python, version $_python_version)]) 4719 4720 dnl Hand the interpreter we just validated to the build, so that the build 4721 dnl steps that run Python scripts use it instead of whatever "python3" 4722 dnl happens to be first on PATH. 4723 PYTHON_BIN="$_python" 4724 4725 _python_ver=`$_python -c "import sysconfig; print(sysconfig.get_config_var('VERSION'));"` 4726 4727 dnl Locate the headers. Prefer the framework/SDK locations, but fall back 4728 dnl to whatever include dir the interpreter itself reports (this is what 4729 dnl makes Homebrew and other non-framework installs work). 4730 if test -d "/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"; then 4731 PYTHON_CFLAGS="-I/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver" 4732 elif test -d "$MACOSX_SDK_PATH/usr/include/python$_python_ver"; then 4733 PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/usr/include/python$_python_ver" 4734 elif test -d "$MACOSX_SDK_PATH/System/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"; then 4735 PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/System/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver" 4736 else 4737 _python_inc=`$_python -c "import sysconfig; print(sysconfig.get_path('include'));"` 4738 PYTHON_CFLAGS="-I$_python_inc" 4739 fi 4740 4741 dnl A framework build links against the Python framework; any other 4742 dnl install (Homebrew, etc.) links against libpython in its LIBDIR. 4743 case "$_python" in 4744 /Library/Frameworks/Python.framework/*|*/System/Library/Frameworks/Python.framework/*) 4745 PYTHON_LIBS="-framework Python" 4746 ;; 4747 *) 4748 dnl Use sysconfig, not distutils.sysconfig: distutils was removed in 4749 dnl Python 3.12 and the interpreter we pick here may well be newer 4750 dnl than the 3.11 floor. 4751 _python_libdir=`$_python -c "import sysconfig; print(sysconfig.get_config_var('LIBDIR'));"` 4752 PYTHON_LIBS="-L$_python_libdir -lpython$_python_ver" 4753 ;; 4754 esac 4755elif test -n "$with_system_python" -o -n "$with_system_libs" && \ 4756 test "$with_system_python" != "no"; then 4757 with_system_python=yes 4758 AC_MSG_RESULT([external]) 4759 AM_PATH_PYTHON([3.11]) 4760 4761 dnl Hand the interpreter AM_PATH_PYTHON just validated to the build, so that 4762 dnl the build steps that run Python scripts use it instead of whatever 4763 dnl "python3" happens to be first on PATH. 4764 PYTHON_BIN="$PYTHON" 4765 4766 python_include=`$PYTHON -c "import sysconfig; print(sysconfig.get_config_var('INCLUDEPY'));"` 4767 python_version=`$PYTHON -c "import sysconfig; print(sysconfig.get_config_var('VERSION'));"` 4768 # Python 3.8 and later distinguish building Python modules from linking to the 4769 # libpython, so embedders must use the "-embed" pkg-config module: 4770 # (https://bugs.python.org/issue36721) 4771 # AM_PATH_PYTHON above already enforces a 3.11 floor, so "-embed" is always 4772 # the right variant here. (The old "$python_version" -lt "3.8" test was a 4773 # numeric comparison on a string like "3.11" and could never work.) 4774 PKG_CHECK_MODULES(PYTHON, python-$python_version-embed, PYTHON_PC="TRUE", PYTHON_PC="" ) 4775 if test "$PYTHON_PC" != "TRUE"; then 4776 PYTHON_CFLAGS="-I$python_include" 4777 PYTHON_LIBS="-lpython$python_version" 4778 fi 4779fi 4780if test "$with_system_python" = "yes" ; then 4781 SYSTEM_PYTHON=YES 4782 dnl check if the headers really work: 4783 save_CPPFLAGS="$CPPFLAGS" 4784 CPPFLAGS="$CPPFLAGS $PYTHON_CFLAGS" 4785 AC_CHECK_HEADER(Python.h, [], 4786 [AC_MSG_ERROR(Python headers not found)], []) 4787 CPPFLAGS="$save_CPPFLAGS" 4788else 4789 SYSTEM_PYTHON=NO 4790 BUILD_TYPE="$BUILD_TYPE PYTHON" 4791 AC_MSG_RESULT([internal]) 4792 # Embedded python dies without Home set 4793 if test "z$HOME" = "z"; then 4794 export HOME=""; 4795 fi 4796 dnl The internal Python tarball is a .tgz (see main/external_deps.lst), so 4797 dnl gzip is all that is needed to unpack it. The old bzip2 requirement was 4798 dnl for the Python 2.x .tar.bz2 and no longer applies. 4799fi 4800AC_SUBST(SYSTEM_PYTHON) 4801AC_SUBST(PYTHON_BIN) 4802AC_SUBST(PYTHON_CFLAGS) 4803AC_SUBST(PYTHON_LIBS) 4804HOME=`echo $HOME | sed 's:\\\\:/:g'` 4805AC_SUBST(HOME) 4806 4807dnl =================================================================== 4808dnl Check for system lucene 4809dnl =================================================================== 4810AC_MSG_CHECKING([which lucene to use]) 4811if test -n "$with_system_lucene" -o -n "$with_system_libs" && \ 4812 test "$with_system_lucene" != "no" && test "$with_system_jars" != "no"; then 4813 AC_MSG_RESULT([external]) 4814 SYSTEM_LUCENE=YES 4815 if test -z $LUCENE_CORE_JAR; then 4816 AC_CHECK_FILE(/usr/share/java/lucene-core-2.9.4.jar, 4817 [ LUCENE_CORE_JAR=/usr/share/java/lucene-core-2.9.4.jar ], 4818 [ 4819 AC_CHECK_FILE(/usr/share/java/lucene-core.jar, 4820 [ LUCENE_CORE_JAR=/usr/share/java/lucene-core.jar ], 4821 [ AC_CHECK_FILE(/usr/share/java/lucene.jar, 4822 [ LUCENE_CORE_JAR=/usr/share/java/lucene.jar ], 4823 [ AC_MSG_ERROR(lucene-core.jar replacement not found)] 4824 ) 4825 ] 4826 ) 4827 ] 4828 ) 4829 else 4830 AC_CHECK_FILE($LUCENE_CORE_JAR, [], 4831 [AC_MSG_ERROR(lucene-core.jar not found.)], []) 4832 fi 4833 4834 if test -z $LUCENE_ANALYZERS_JAR; then 4835 AC_CHECK_FILE(/usr/share/java/lucene-analyzers-2.3.jar, 4836 [ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-analyzers-2.3.jar ], 4837 [ 4838 AC_CHECK_FILE(/usr/share/java/lucene-contrib/lucene-analyzers.jar, 4839 [ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-contrib/lucene-analyzers.jar ], 4840 [ AC_MSG_ERROR(lucene-analyzers.jar replacement not found.)] 4841 ) 4842 ] 4843 ) 4844 else 4845 AC_CHECK_FILE($LUCENE_CORE_JAR, [], 4846 [ AC_MSG_ERROR(lucene-analyzers.jar not found.)], []) 4847 fi 4848 AC_MSG_CHECKING([whether lucene is version 2.x]) 4849 export LUCENE_CORE_JAR 4850 if $PERL -e 'use Archive::Zip; 4851 my $file = "$ENV{'LUCENE_CORE_JAR'}"; 4852 my $zip = Archive::Zip->new( $file ); 4853 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 4854 if ( $mf =~ m/Specification-Version: 2.*/ ) { 4855 exit 0; 4856 } else { 4857 exit 1; 4858 }'; then 4859 AC_MSG_RESULT([yes]) 4860 else 4861 AC_MSG_RESULT([no]) 4862 AC_MSG_CHECKING([whether lucene is version 3.x]) 4863 4864 if $PERL -e 'use Archive::Zip; 4865 my $file = "$ENV{'LUCENE_CORE_JAR'}"; 4866 my $zip = Archive::Zip->new( $file ); 4867 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 4868 if ( $mf =~ m/Specification-Version: 3.*/ ) { 4869 exit 0; 4870 } else { 4871 exit 1; 4872 }'; then 4873 AC_MSG_RESULT([yes]) 4874 else 4875 AC_MSG_ERROR([no, you need lucene 2 or 3]) 4876 fi 4877 fi 4878 4879else 4880 AC_MSG_RESULT([internal]) 4881 SYSTEM_LUCENE=NO 4882 BUILD_TYPE="$BUILD_TYPE LUCENE" 4883fi 4884AC_SUBST(SYSTEM_LUCENE) 4885AC_SUBST(LUCENE_CORE_JAR) 4886AC_SUBST(LUCENE_ANALYZERS_JAR) 4887 4888AC_MSG_CHECKING([whether to build the MySQL Connector extension]) 4889if test -n "$enable_mysql_connector" -a "$enable_mysql_connector" != "no"; then 4890 AC_MSG_RESULT([yes]) 4891 ENABLE_MYSQLC=YES 4892 AC_MSG_CHECKING([for mysqlc module]) 4893 if test -d mysqlc; then 4894 AC_MSG_RESULT([OK]) 4895 else 4896 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 4897 fi 4898 BUILD_TYPE="$BUILD_TYPE MYSQLC" 4899else 4900 AC_MSG_RESULT([no]) 4901 ENABLE_MYSQLC=NO 4902fi 4903AC_SUBST(ENABLE_MYSQLC) 4904 4905if test "$ENABLE_MYSQLC" = "YES"; then 4906dnl =================================================================== 4907dnl Check for system MySQL 4908dnl =================================================================== 4909AC_MSG_CHECKING([for mysql pre-requisites]) 4910if test -n "$with_system_mysql" -o -n "$with_system_libs" && \ 4911 test "$with_system_mysql" != "no" && test "$with_system_libs" != "no"; then 4912 AC_MSG_RESULT([external MySQL]) 4913 SYSTEM_MYSQL=YES 4914 AC_PATH_PROG( MYSQLCONFIG, mysql_config) 4915 AC_MSG_CHECKING([MySQL version]) 4916 if test -z "$MYSQLCONFIG" -o ! -x "$MYSQLCONFIG" ; then 4917 AC_MSG_ERROR([can not find/execute mysql_config]); 4918 fi 4919 MYSQL_VERSION=`$MYSQLCONFIG --version` 4920 MYSQL_MAJOR=`$MYSQLCONFIG --version | cut -d"." -f1` 4921 if test "$MYSQL_MAJOR" -ge "5"; then 4922 AC_MSG_RESULT([OK]) 4923 else 4924 AC_MSG_ERROR([too old, use 5.0.x or 5.1.x]) 4925 fi 4926 AC_MSG_CHECKING([for MySQL Client library]) 4927 MYSQL_INC=`$MYSQLCONFIG --include` 4928 MYSQL_LIB=`$MYSQLCONFIG --libs` 4929 MYSQL_DEFINES=`$MYSQLCONFIG --cflags | sed -e s,$MYSQL_INC,,` 4930 AC_MSG_RESULT([includes $MYSQL_INC, libraries $MYSQL_LIB]) 4931else 4932 SYSTEM_MYSQL=NO 4933 if test -n "$with_libmysql_path"; then 4934 AC_MSG_RESULT([external Connector/C (libmysql)]) 4935 LIBMYSQL=libmysql.so 4936 if test "$_os" = "Darwin"; then 4937 LIBMYSQL=libmysql.dylib 4938 elif test "$_os" = "WINNT"; then 4939 LIBMYSQL=libmysql.dll 4940 fi 4941 AC_MSG_CHECKING([for $LIBMYSQL]) 4942 if test -e "$with_libmysql_path/lib/$LIBMYSQL"; then 4943 AC_MSG_RESULT([found.]) 4944 LIBMYSQL_PATH=$with_libmysql_path 4945 else 4946 AC_MSG_ERROR([not found. Please specify proper path in --with-libmysql-path.]) 4947 fi 4948 else 4949 AC_MSG_ERROR([not given. Please specify either --with-system-mysql or --with-libmysql-path]) 4950 fi 4951fi 4952AC_SUBST(SYSTEM_MYSQL) 4953AC_SUBST(MYSQL_INC) 4954AC_SUBST(MYSQL_LIB) 4955AC_SUBST(MYSQL_DEFINES) 4956AC_SUBST(LIBMYSQL_PATH) 4957 4958AC_LANG_PUSH([C++]) 4959dnl =================================================================== 4960dnl Check for system MySQL C++ Connector 4961dnl =================================================================== 4962# FIXME! 4963# who thought this too-generic cppconn dir was a good idea? 4964AC_MSG_CHECKING([MySQL Connector/C++]) 4965if test -n "$with_system_mysql_cppconn" -o -n "$with_system_libs" && \ 4966 test "$with_system_mysql_cppconn" != "no" && test "$with_system_libs" != "no"; then 4967 AC_MSG_RESULT([external]) 4968 SYSTEM_MYSQL_CPPCONN=YES 4969 AC_LANG_PUSH([C++]) 4970 AC_CHECK_HEADER(mysql_driver.h, [], 4971 [AC_MSG_ERROR(mysql_driver.h not found. install MySQL C++ Connectivity)], []) 4972 AC_CHECK_LIB(mysqlcppconn, main, [], 4973 [AC_MSG_ERROR(MySQL C++ Connectivity lib not found or functional)], []) 4974 AC_MSG_CHECKING([version]) 4975 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 4976#include <mysql_driver.h> 4977 4978int main(int argc, char **argv) { 4979 sql::Driver *driver; 4980 driver = get_driver_instance(); 4981 if (driver->getMajorVersion() > 1 || \ 4982 (driver->getMajorVersion() == 1 && driver->getMinorVersion() > 0) || \ 4983 (driver->getMajorVersion() == 1 && driver->getMinorVersion() == 0 && driver->getPatchVersion() >= 6)) 4984 return 0; 4985 else 4986 return 1; 4987} 4988 ]])],[AC_MSG_RESULT(OK)],[AC_MSG_ERROR([not suitable, we need >= 1.0.6])],[]) 4989 AC_LANG_POP([C++]) 4990 4991else 4992 AC_MSG_RESULT([no]) 4993 SYSTEM_MYSQL_CPPCONN= 4994fi 4995AC_LANG_POP([C++]) 4996AC_SUBST(SYSTEM_MYSQL_CPPCONN) 4997fi 4998 4999dnl =================================================================== 5000dnl Check for system hsqldb 5001dnl =================================================================== 5002AC_MSG_CHECKING([which hsqldb to use]) 5003if test -n "$with_system_hsqldb" -o -n "$with_system_libs" && \ 5004 test "$with_system_hsqldb" != "no" && test "$with_system_jars" != "no"; then 5005 AC_MSG_RESULT([external]) 5006 SYSTEM_HSQLDB=YES 5007 if test -z $HSQLDB_JAR; then 5008 HSQLDB_JAR=/usr/share/java/hsqldb.jar 5009 fi 5010 AC_CHECK_FILE($HSQLDB_JAR, [], 5011 [AC_MSG_ERROR(hsqldb.jar not found.)], []) 5012 AC_MSG_CHECKING([whether hsqldb is 1.8.0.x]) 5013 export HSQLDB_JAR 5014 if $PERL -e 'use Archive::Zip; 5015 my $file = "$ENV{'HSQLDB_JAR'}"; 5016 my $zip = Archive::Zip->new( $file ); 5017 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 5018 if ( $mf =~ m/Specification-Version: 1.8.*/ ) { 5019 push @l, split(/\n/, $mf); 5020 foreach my $line (@l) { 5021 if ($line =~ m/Specification-Version:/) { 5022 ($t, $version) = split (/:/,$line); 5023 $version =~ s/^\s//; 5024 ($a, $b, $c, $d) = split (/\./,$version); 5025 if ($c == "0" && $d > "8") { 5026 exit 0; 5027 } else { 5028 exit 1; 5029 } 5030 } 5031 } 5032 } else { 5033 exit 1; 5034 }'; then 5035 AC_MSG_RESULT([yes]) 5036 else 5037 AC_MSG_ERROR([no, you need hsqldb >= 1.8.0.9 but < 1.8.1]) 5038 fi 5039else 5040 AC_MSG_RESULT([internal]) 5041 SYSTEM_HSQLDB=NO 5042 BUILD_TYPE="$BUILD_TYPE HSQLDB" 5043fi 5044AC_SUBST(SYSTEM_HSQLDB) 5045AC_SUBST(HSQLDB_JAR) 5046 5047dnl =================================================================== 5048dnl Check for system beanshell 5049dnl =================================================================== 5050ENABLE_BEANSHELL=YES 5051AC_MSG_CHECKING([which beanshell to use]) 5052if test -n "$with_system_beanshell" -o -n "$with_system_libs" && \ 5053 test "$with_system_beanshell" != "no" && test "$with_system_jars" != "no"; then 5054 AC_MSG_RESULT([external]) 5055 SYSTEM_BSH=YES 5056 if test -z $BSH_JAR; then 5057 BSH_JAR=/usr/share/java/bsh.jar 5058 fi 5059 AC_CHECK_FILE($BSH_JAR, [], 5060 [AC_MSG_ERROR(bsh.jar not found.)], []) 5061elif test "x$enable_beanshell" = "xyes"; then 5062 AC_MSG_RESULT([internal]) 5063 SYSTEM_BSH=NO 5064 BUILD_TYPE="$BUILD_TYPE BSH" 5065else 5066 AC_MSG_RESULT([none (disabled)]) 5067 SYSTEM_BSH=NO 5068 ENABLE_BEANSHELL=NO 5069fi 5070AC_SUBST(SYSTEM_BSH) 5071AC_SUBST(BSH_JAR) 5072AC_SUBST(ENABLE_BEANSHELL) 5073 5074 5075dnl =================================================================== 5076dnl Check for saxon. It can come from two different places: 5077dnl - pre-installed on the system. This is checked when the --with-system-saxon 5078dnl option is given to configure. 5079dnl The exact place can be specified with the --with-saxon-jar=<path> option. 5080dnl - From the saxon tar ball in ext_sources/. This is used when --enable-saxon 5081dnl is given to configure but not any of --with-system-saxon or --with-saxon-jar. 5082dnl =================================================================== 5083DISABLE_SAXON= 5084AC_MSG_CHECKING([which saxon to use]) 5085if test -n "$with_system_saxon" -o -n "$with_system_libs" && \ 5086 test "$with_system_saxon" != "no" && test "$with_system_jars" != "no"; then 5087 AC_MSG_RESULT([external]) 5088 SYSTEM_SAXON=YES 5089 if test -z $SAXON_JAR; then 5090 AC_CHECK_FILE(/usr/share/java/saxon9.jar, 5091 [ SAXON_JAR=/usr/share/java/saxon9.jar ], 5092 [ 5093 AC_CHECK_FILE(/usr/share/java/saxon.jar, 5094 [ SAXON_JAR=/usr/share/java/saxon.jar ], 5095 [ AC_CHECK_FILE(/usr/share/java/saxon9.jar, 5096 [ SAXON_JAR=/usr/share/java/saxon9.jar ], 5097 [ AC_MSG_ERROR(saxon.jar replacement not found)] 5098 ) 5099 ] 5100 ) 5101 ] 5102 ) 5103 else 5104 AC_CHECK_FILE($SAXON_JAR, [], 5105 [AC_MSG_ERROR(saxon.jar replacement not found.)], []) 5106 fi 5107 if test -n "$SERIALIZER_JAR"; then 5108 AC_CHECK_FILE($SERIALIZER_JAR, [], 5109 [AC_MSG_ERROR(serializer.jar not found.)], []) 5110 AC_SUBST(SERIALIZER_JAR) 5111 fi 5112 5113dnl Saxon comes in two practically available versions, the out-of-date saxonb which 5114dnl supports the java extensions that AOO uses, and the up-to-date saxon he 5115dnl "home edition" version, which is crippled to not support those java extensions. 5116dnl And as an aside the he one also needs to be tweaked to include 5117dnl a META-INF/services to broadcast that it supports the jaxp transform factory 5118 5119 AC_MSG_CHECKING([if saxon works]) 5120 cat > saxontest.java <<_ACEOF 5121[import javax.xml.transform.TransformerFactory; 5122import javax.xml.transform.Transformer; 5123import javax.xml.transform.stream.StreamSource; 5124import java.io.*; 5125 5126import net.sf.saxon.FeatureKeys; 5127 5128class saxontest { 5129 public static void main(String[] args) { 5130 System.setProperty("javax.xml.transform.TransformerFactory", 5131 "net.sf.saxon.TransformerFactoryImpl"); 5132 try { 5133 TransformerFactory tfactory = TransformerFactory.newInstance(); 5134 // some external saxons (Debian, Ubuntu, ...) have this disabled 5135 // per default 5136 tfactory.setAttribute(FeatureKeys.ALLOW_EXTERNAL_FUNCTIONS, new Boolean(true)); 5137 System.out.println("TransformerFactory is" + 5138 tfactory.getClass().getName()); 5139 Transformer transformer = tfactory.newTransformer( 5140 new StreamSource(new File(args[0]))); 5141 } catch(Exception e){ 5142 e.printStackTrace(System.err); 5143 System.exit(-1); 5144 } 5145 System.exit(0); 5146 } 5147} 5148] 5149_ACEOF 5150 cat > saxontest.xsl<<_ACEOF 5151[<?xml version="1.0" encoding="UTF-8"?> 5152<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> 5153 <xsl:template match="/"> 5154 <xsl:value-of select="math:sqrt(1)" xmlns:math="java:java.lang.Math"/> 5155 </xsl:template> 5156</xsl:stylesheet> 5157] 5158_ACEOF 5159 javac_cmd="$JAVACOMPILER -cp $SAXON_JAR saxontest.java 1>&2" 5160 AC_TRY_EVAL(javac_cmd) 5161 if test $? = 0 && test -f ./saxontest.class ; then 5162 java_cmd="$JAVAINTERPRETER -cp $SAXON_JAR:. saxontest saxontest.xsl 1>&2" 5163 AC_TRY_EVAL(java_cmd) 5164 if test $? = 0; then 5165 AC_MSG_RESULT([yes]) 5166 else 5167 cat saxontest.java >&5 5168 AC_MSG_RESULT([no]) 5169 AC_MSG_ERROR([Non-functional saxon jar, e.g. crippled saxon-he instead of saxonb]) 5170 fi 5171 else 5172 AC_MSG_RESULT([no]) 5173 cat saxontest.java >&5 5174 AC_MSG_ERROR([saxontest could not be compiled, non-functional saxon jar]) 5175 fi 5176elif test "x$enable_saxon" = "xyes"; then 5177 AC_MSG_RESULT([internal]) 5178 SYSTEM_SAXON=NO 5179 BUILD_TYPE="$BUILD_TYPE SAXON" 5180else 5181 AC_MSG_RESULT([none (disabled)]) 5182 SYSTEM_SAXON=NO 5183 DISABLE_SAXON=YES 5184fi 5185AC_SUBST(SYSTEM_SAXON) 5186AC_SUBST(SAXON_JAR) 5187AC_SUBST(DISABLE_SAXON) 5188 5189 5190dnl =================================================================== 5191dnl Check for rhino 5192dnl =================================================================== 5193ENABLE_JAVASCRIPT= 5194AC_MSG_CHECKING([whether to enable support for JavaScript]) 5195if test "x$enable_javascript" = "xyes"; then 5196 BUILD_TYPE="$BUILD_TYPE RHINO" 5197 AC_MSG_RESULT([yes]) 5198 ENABLE_JAVASCRIPT=YES 5199else 5200 AC_MSG_RESULT([no]) 5201 ENABLE_JAVASCRIPT=NO 5202fi 5203AC_SUBST(ENABLE_JAVASCRIPT) 5204 5205 5206dnl =================================================================== 5207dnl Check for CoinMP 5208dnl =================================================================== 5209ENABLE_COINMP= 5210SYSTEM_COINMP=NO 5211COINMP_CFLAGS= 5212COINMP_LIBS= 5213AC_MSG_CHECKING([whether to enable support for CoinMP]) 5214if test "x$enable_coinmp" = "xyes"; then 5215 BUILD_TYPE="$BUILD_TYPE COINMP" 5216 AC_MSG_RESULT([yes]) 5217 ENABLE_COINMP=YES 5218 5219 dnl Check whether to use system or internal CoinMP 5220 AC_MSG_CHECKING([which coinmp to use]) 5221 if test "x$with_system_coinmp" = "xyes" -o -n "$with_system_libs"; then 5222 AC_MSG_RESULT([system]) 5223 PKG_CHECK_MODULES([COINMP], [coinmp]) 5224 SYSTEM_COINMP=YES 5225 # some systems need this. Like Ubuntu.... 5226 AC_CHECK_LIB(m, floor) 5227 AC_CHECK_LIB(dl, dlopen) 5228 else 5229 AC_MSG_RESULT([internal]) 5230 SYSTEM_COINMP=NO 5231 BUILD_TYPE="$BUILD_TYPE COINMP" 5232 fi 5233else 5234 AC_MSG_RESULT([no]) 5235 ENABLE_COINMP=NO 5236fi 5237AC_SUBST(ENABLE_COINMP) 5238AC_SUBST(SYSTEM_COINMP) 5239AC_SUBST(COINMP_CFLAGS) 5240AC_SUBST(COINMP_LIBS) 5241 5242 5243dnl =================================================================== 5244dnl Check for system curl 5245dnl =================================================================== 5246with_system_curl_dir="$with_system_curl" 5247AC_MSG_CHECKING([which curl to use]) 5248if test -n "$with_system_curl" -o -n "$with_system_libs" && \ 5249 test "$with_system_curl" != "no"; then 5250 AC_MSG_RESULT([external]) 5251 SYSTEM_CURL=YES 5252 5253 dnl See the matching libxml check above for why this pins 5254 dnl curl-config to the directory given to --with-system-curl instead 5255 dnl of resolving a bare "curl-config" off PATH. 5256 if test "$with_system_curl_dir" != "yes" -a -n "$with_system_curl_dir"; then 5257 CURLCONFIG="$with_system_curl_dir/bin/curl-config" 5258 if test ! -x "$CURLCONFIG"; then 5259 AC_MSG_ERROR([--with-system-curl=$with_system_curl_dir given, but $CURLCONFIG not found or not executable]) 5260 fi 5261 else 5262 AC_PATH_PROG( CURLCONFIG, curl-config) 5263 if test -z "$CURLCONFIG"; then 5264 AC_MSG_ERROR([install curl to run this script]) 5265 fi 5266 fi 5267 5268 # check curl version 5269 AC_MSG_CHECKING([whether curl is >= 7.13.1]) 5270 if test "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $1 }'`" -gt "7" -a \ 5271 "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $2 }'`" -gt "13" -a \ 5272 "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $3 }'`" -gt "1"; then 5273 AC_MSG_ERROR([no, you need at least curl 7.13,1]) 5274 else 5275 AC_MSG_RESULT([yes]) 5276 fi 5277 5278 # Does curl use OpenSSL as its SSL implementation? Needed for ucb/source/ucp/webdav. 5279 AC_MSG_CHECKING([whether curl uses OpenSSL as its SSL backend]) 5280 if $CURLCONFIG --ssl-backends | $GREP -q 'OpenSSL'; then 5281 AC_MSG_RESULT([yes]) 5282 else 5283 AC_MSG_ERROR([no, cannot use system curl whose SSL backend isn't OpenSSL]) 5284 fi 5285 5286 CURL_LIBS=`$CURLCONFIG --libs` 5287 CURL_CFLAGS=`$CURLCONFIG --cflags` 5288 CURL_PREFIX=`$CURLCONFIG --prefix` 5289else 5290 AC_MSG_RESULT([internal]) 5291 SYSTEM_CURL=NO 5292 BUILD_TYPE="$BUILD_TYPE CURL" 5293fi 5294AC_SUBST(SYSTEM_CURL) 5295AC_SUBST(CURL_CFLAGS) 5296AC_SUBST(CURL_LIBS) 5297AC_SUBST(CURL_PREFIX) 5298 5299dnl =================================================================== 5300dnl Check for system openssl 5301dnl =================================================================== 5302dnl This sits ahead of the static-pin block below because that block 5303dnl rewrites OPENSSL_LIBS. openssl has no *-config script, so the prefix and 5304dnl libdir the pin block needs are read from the .pc file (libdir can be 5305dnl lib64 rather than $prefix/lib). 5306AC_MSG_CHECKING([which libssl to use]) 5307if test -n "$with_system_openssl" -o -n "$with_system_libs" && \ 5308 test "$with_system_openssl" != "no"; then 5309 AC_MSG_RESULT([external]) 5310 if test "$_os" = "FreeBSD"; then 5311 OPENSSL_CFLAGS= 5312 OPENSSL_LIBS="-lssl -lcrypto" 5313 else 5314 PKG_CHECK_MODULES( OPENSSL, openssl ) 5315 OPENSSL_PREFIX=`$PKG_CONFIG --variable=prefix openssl` 5316 OPENSSL_LIBDIR=`$PKG_CONFIG --variable=libdir openssl` 5317 fi 5318 SYSTEM_OPENSSL=YES 5319else 5320 AC_MSG_RESULT([internal]) 5321 SYSTEM_OPENSSL=NO 5322 BUILD_TYPE="$BUILD_TYPE OPENSSL" 5323fi 5324AC_SUBST(SYSTEM_OPENSSL) 5325AC_SUBST(OPENSSL_CFLAGS) 5326AC_SUBST(OPENSSL_LIBS) 5327 5328dnl =================================================================== 5329dnl Pin selected system libraries to their static archives 5330dnl =================================================================== 5331dnl Runs after the libxml/libxslt/curl/openssl checks above, which is where 5332dnl the *_PREFIX and *_LIBS values it rewrites are established. 5333dnl 5334dnl Without this the static-vs-dynamic choice is implicit: "-lfoo" lets the 5335dnl linker take a dylib over an archive, and the libxml2 link in 5336dnl forms/util and xmlsecurity/util explicitly prefers a dylib when the 5337dnl prefix has one. Either way a dylib appearing at the prefix silently 5338dnl turns a release build dynamic, and these dylibs carry absolute install 5339dnl names that do not exist on an end user's machine. 5340STATIC_SYSTEM_LIBS= 5341STATIC_SYSTEM_LIBXML=NO 5342STATIC_SYSTEM_LIBXSLT=NO 5343STATIC_SYSTEM_CURL=NO 5344if test -n "$with_static_system_libs" -a "$with_static_system_libs" != "no"; then 5345 if test "$with_static_system_libs" = "yes"; then 5346 AC_MSG_ERROR([--with-static-system-libs needs a list, e.g. --with-static-system-libs=libxml,libxslt,curl]) 5347 fi 5348 for _ssentry in `echo "$with_static_system_libs" | $SED -e 's/,/ /g'`; do 5349 dnl Each entry is NAME or NAME:DIR. The explicit DIR is what makes 5350 dnl libiconv usable here: it has no --with-system-libiconv, so 5351 dnl configure has no prefix of its own to fall back on. 5352 _sslib=`echo "$_ssentry" | $SED -e 's/:.*//'` 5353 _sslibdir= 5354 _ssgiven= 5355 case "$_ssentry" in 5356 *:*) _ssgiven=`echo "$_ssentry" | $SED -e 's/^[[^:]]*://'` ;; 5357 esac 5358 AC_MSG_CHECKING([for a static system $_sslib]) 5359 case "$_sslib" in 5360 libxml) 5361 _ssenabled="$SYSTEM_LIBXML"; _ssprefix="$LIBXML_PREFIX"; _ssopt="--with-system-libxml" 5362 _ssarchives="libxml2.a"; _sslflags="-lxml2" 5363 ;; 5364 libxslt) 5365 _ssenabled="$SYSTEM_LIBXSLT"; _ssprefix="$LIBXSLT_PREFIX"; _ssopt="--with-system-libxslt" 5366 _ssarchives="libxslt.a libexslt.a"; _sslflags="-lxslt -lexslt" 5367 ;; 5368 curl) 5369 _ssenabled="$SYSTEM_CURL"; _ssprefix="$CURL_PREFIX"; _ssopt="--with-system-curl" 5370 _ssarchives="libcurl.a"; _sslflags="-lcurl" 5371 ;; 5372 openssl) 5373 dnl No *-config here: configure takes prefix and libdir from 5374 dnl openssl.pc, so the archives are found even under lib64. 5375 _ssenabled="$SYSTEM_OPENSSL"; _ssprefix="$OPENSSL_PREFIX"; _sslibdir="$OPENSSL_LIBDIR"; _ssopt="--with-system-openssl" 5376 _ssarchives="libssl.a libcrypto.a"; _sslflags="-lssl -lcrypto" 5377 ;; 5378 libiconv) 5379 dnl The bundled XML libs are built --without-iconv, so this only 5380 dnl covers a *system* libxml2/libxslt/curl whose own build enabled 5381 dnl iconv and whose *-config therefore reports -liconv. There is no 5382 dnl --with-system-libiconv to take a prefix from, hence libiconv:DIR. 5383 _ssenabled=YES; _ssprefix="$_ssgiven"; _ssopt= 5384 _ssarchives="libiconv.a"; _sslflags="-liconv" 5385 ;; 5386 *) 5387 AC_MSG_ERROR([unsupported library "$_sslib" in --with-static-system-libs; supported: libxml, libxslt, curl, openssl, libiconv]) 5388 ;; 5389 esac 5390 if test -n "$_ssgiven"; then 5391 _ssprefix="$_ssgiven" 5392 _sslibdir= 5393 fi 5394 if test "$_ssenabled" != "YES"; then 5395 AC_MSG_ERROR([--with-static-system-libs=$_sslib requires $_ssopt]) 5396 fi 5397 if test -z "$_ssprefix"; then 5398 if test "$_sslib" = "openssl"; then 5399 AC_MSG_ERROR([--with-static-system-libs=openssl found no prefix from pkg-config (FreeBSD?); write openssl:DIR, e.g. openssl:/usr/local]) 5400 elif test -n "$_ssopt"; then 5401 AC_MSG_ERROR([--with-static-system-libs=$_sslib needs a prefix; give $_ssopt=DIR (macOS only)]) 5402 else 5403 AC_MSG_ERROR([--with-static-system-libs=$_sslib needs a prefix; write $_sslib:DIR, e.g. $_sslib:/usr/local]) 5404 fi 5405 fi 5406 test -z "$_sslibdir" && _sslibdir="$_ssprefix/lib" 5407 for _ssa in $_ssarchives; do 5408 if test ! -f "$_sslibdir/$_ssa"; then 5409 AC_MSG_ERROR([--with-static-system-libs=$_sslib given, but $_sslibdir/$_ssa not found]) 5410 fi 5411 done 5412 dnl Replace each "-lfoo" with the archive's absolute path so the 5413 dnl linker cannot pick a dylib sitting beside it. Matching on a 5414 dnl trailing space (the value gets one appended, then trimmed) keeps 5415 dnl this to portable BRE -- $SED is whatever sed AC_PATH_PROGS found, 5416 dnl which is not required to be GNU, and \| alternation silently 5417 dnl matches nothing under the BSD sed macOS ships. 5418 for _ssl in $_sslflags; do 5419 _ssa="lib`echo "$_ssl" | $SED -e 's/^-l//'`.a" 5420 case "$_sslib" in 5421 libxml) LIBXML_LIBS=`echo "$LIBXML_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5422 libxslt) LIBXSLT_LIBS=`echo "$LIBXSLT_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5423 curl) CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5424 openssl) 5425 dnl curl-config reports -lssl -lcrypto for a static libcurl, so the 5426 dnl pin has to reach CURL_LIBS as well as OPENSSL_LIBS. 5427 OPENSSL_LIBS=`echo "$OPENSSL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5428 CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5429 ;; 5430 libiconv) 5431 dnl iconv is a transitive dep, so -liconv turns up in whichever 5432 dnl of these *-config reported it -- rewrite all of them. 5433 LIBXML_LIBS=`echo "$LIBXML_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5434 LIBXSLT_LIBS=`echo "$LIBXSLT_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5435 CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5436 ;; 5437 esac 5438 done 5439 case "$_sslib" in 5440 libxml) STATIC_SYSTEM_LIBXML=YES ;; 5441 libxslt) STATIC_SYSTEM_LIBXSLT=YES ;; 5442 curl) STATIC_SYSTEM_CURL=YES ;; 5443 esac 5444 STATIC_SYSTEM_LIBS="$STATIC_SYSTEM_LIBS $_sslib" 5445 AC_MSG_RESULT([$_sslibdir]) 5446 done 5447 STATIC_SYSTEM_LIBS=`echo $STATIC_SYSTEM_LIBS` 5448fi 5449AC_SUBST(STATIC_SYSTEM_LIBS) 5450AC_SUBST(STATIC_SYSTEM_LIBXML) 5451AC_SUBST(STATIC_SYSTEM_LIBXSLT) 5452AC_SUBST(STATIC_SYSTEM_CURL) 5453 5454dnl =================================================================== 5455dnl Check for system mdds 5456dnl =================================================================== 5457AC_MSG_CHECKING([which mdds to use]) 5458if test -n "$with_system_mdds" -o -n "$with_system_headers" && \ 5459 test "$with_system_mdds" != "no"; then 5460 AC_MSG_RESULT([external]) 5461 SYSTEM_MDDS=YES 5462 AC_LANG_PUSH([C++]) 5463 AC_CHECK_HEADER(mdds/flat_segment_tree.hpp, [], 5464 [AC_MSG_ERROR(mdds/flat_segment_tree.hpp not found. install mdds)], []) 5465 AC_LANG_POP([C++]) 5466else 5467 AC_MSG_RESULT([internal]) 5468 BUILD_TYPE="$BUILD_TYPE MDDS" 5469 SYSTEM_MDDS=NO 5470fi 5471AC_SUBST(SYSTEM_MDDS) 5472 5473dnl =================================================================== 5474dnl Check for system boost 5475dnl =================================================================== 5476AC_MSG_CHECKING([which boost to use]) 5477if test -n "$with_system_boost" -o -n "$with_system_headers" && \ 5478 test "$with_system_boost" != "no"; then 5479 AC_MSG_RESULT([external]) 5480 SYSTEM_BOOST=YES 5481 AC_LANG_PUSH([C++]) 5482 AC_CHECK_HEADER(boost/shared_ptr.hpp, [], 5483 [AC_MSG_ERROR(boost/shared_ptr.hpp not found. install boost)], []) 5484 AC_CHECK_HEADER(boost/spirit/include/classic_core.hpp, [], 5485 [AC_MSG_ERROR(boost/spirit/include/classic_core.hpp not found. install boost >= 1.36)], []) 5486 AC_CHECK_HEADER(boost/function.hpp, [], 5487 [AC_MSG_ERROR(boost/function.hpp not found. install boost)], []) 5488 5489 save_CXXFLAGS=$CXXFLAGS 5490 CXXFLAGS="$CXXFLAGS -fno-exceptions" 5491 AC_MSG_CHECKING([whether boost/function.hpp compiles with -fno-exceptions]) 5492 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <boost/function.hpp> 5493]], [[]])],[ac_cv_cxx_boost_no_exceptons_broken=no],[ac_cv_cxx_boost_no_exceptons_broken=yes]) 5494 5495 if test "$ac_cv_cxx_boost_no_exceptons_broken" = "yes"; then 5496 AC_MSG_ERROR([no, see https://bugzilla.redhat.com/show_bug.cgi?id=477131]) 5497 else 5498 AC_MSG_RESULT([yes]) 5499 fi 5500 CXXFLAGS=$save_CXXFLAGS 5501 AC_LANG_POP([C++]) 5502else 5503 AC_MSG_RESULT([internal]) 5504 BUILD_TYPE="$BUILD_TYPE BOOST" 5505 SYSTEM_BOOST=NO 5506fi 5507AC_SUBST(SYSTEM_BOOST) 5508 5509dnl =================================================================== 5510dnl Check for system vigra 5511dnl =================================================================== 5512AC_MSG_CHECKING([which vigra to use]) 5513if test -n "$with_system_vigra" -o -n "$with_system_headers" && \ 5514 test "$with_system_vigra" != "no"; then 5515 AC_MSG_RESULT([external]) 5516 SYSTEM_VIGRA=YES 5517 AC_LANG_PUSH([C++]) 5518 AC_CHECK_HEADER(vigra/copyimage.hxx, [], 5519 [AC_MSG_ERROR(vigra/copyimage.hxx not found. install vigra)], []) 5520 AC_LANG_POP([C++]) 5521else 5522 AC_MSG_RESULT([internal]) 5523 BUILD_TYPE="$BUILD_TYPE VIGRA" 5524 SYSTEM_VIGRA=NO 5525fi 5526AC_SUBST(SYSTEM_VIGRA) 5527 5528dnl =================================================================== 5529dnl Check for system odbc 5530dnl =================================================================== 5531AC_MSG_CHECKING([which odbc headers to use]) 5532if test -n "$with_system_odbc_headers" -o -n "$with_system_headers" && \ 5533 test "$with_system_odbc_headers" != "no"; then 5534 AC_MSG_RESULT([external]) 5535 SYSTEM_ODBC_HEADERS=YES 5536 5537 AC_CHECK_HEADER(sqlext.h, [], 5538 [AC_MSG_ERROR(odbc not found. install odbc)], []) 5539else 5540 AC_MSG_RESULT([internal]) 5541 SYSTEM_ODBC_HEADERS=NO 5542 BUILD_TYPE="$BUILD_TYPE UNIXODBC" 5543fi 5544AC_SUBST(SYSTEM_ODBC_HEADERS) 5545 5546AC_MSG_CHECKING([whether to build XML Security support]) 5547if test "$enable_nss_module" = "no"; then 5548 AC_MSG_RESULT([no, since NSS disabled but needed]) 5549else 5550 AC_MSG_RESULT([yes]) 5551fi 5552 5553AC_MSG_CHECKING([whether to build LDAP configuration backend]) 5554if test -z "$enable_ldap" || test "$enable_ldap" = "yes"; then 5555 if test "$with_openldap" = "yes"; then 5556 AC_MSG_RESULT([yes]) 5557 WITH_LDAP=YES 5558 else 5559 WITH_LDAP=NO 5560 fi 5561else 5562 AC_MSG_RESULT([no]) 5563 WITH_LDAP=NO 5564fi 5565 5566if test "$WITH_LDAP" = "YES"; then 5567 dnl =================================================================== 5568 dnl Test whether we want to use the OpenLDAP LDAP SDK 5569 dnl =================================================================== 5570 AC_MSG_CHECKING([which LDAP SDK to use]) 5571 if test -n "$with_openldap" && test "$with_openldap" != "no"; then 5572 AC_MSG_RESULT([OpenLDAP]) 5573 WITH_OPENLDAP=YES 5574 AC_CHECK_HEADERS(ldap.h, [], 5575 [AC_MSG_ERROR(ldap.h not found. install openldap libs)], []) 5576 AC_CHECK_LIB(ldap, ldap_simple_bind_s, [], 5577 [AC_MSG_ERROR(openldap lib not found or functional)], []) 5578 # rumours say that OpenLDAP doesn't have that function. I looked and 5579 # it has it. Test for it to be sure 5580 AC_CHECK_LIB(ldap, ldap_set_option, [], 5581 [AC_MSG_ERROR(openldap lib not found or functional)], []) 5582 fi 5583fi 5584AC_SUBST(WITH_LDAP) 5585AC_SUBST(WITH_OPENLDAP) 5586 5587AC_MSG_CHECKING([whether to build the internal NSS module]) 5588if test "$enable_nss_module" != "no"; then 5589 ENABLE_NSS_MODULE="YES" 5590 BUILD_TYPE="$BUILD_TYPE NSS" 5591 AC_MSG_RESULT([yes]) 5592 if test "$_os" = "WINNT"; then 5593 AC_MSG_CHECKING([for Mozilla build tooling]) 5594 if test -z "$MOZILLABUILD" ; then 5595AC_MSG_ERROR([ 5596Mozilla build tooling not found! 5597 It is required for NSS that is needed for AOO's security facilities. 5598 Either disable NSS using the option --disable-nss-module 5599 or use the --with-mozilla-build option after installing the tool obtained 5600 from https://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32/]) 5601 else 5602 if test \( "$WITH_MINGWIN" = "yes" \) ; then 5603 if test ! -d "$MOZILLABUILD" ; then 5604AC_MSG_ERROR([Mozilla build tooling incomplete!]) 5605 else 5606 AC_MSG_RESULT([ok]) 5607 fi 5608 else 5609 if test ! -d "$MOZILLABUILD/msys" ; then 5610AC_MSG_ERROR([Mozilla build tooling incomplete!]) 5611 else 5612 AC_MSG_RESULT([ok]) 5613 fi 5614 fi 5615 fi 5616 fi 5617else 5618 ENABLE_NSS_MODULE="NO" 5619 AC_MSG_RESULT([no]) 5620fi 5621 5622AC_SUBST(ENABLE_NSS_MODULE) 5623AC_SUBST(MOZILLABUILD) 5624AC_SUBST(MOZ_INC) 5625 5626dnl =================================================================== 5627dnl Check for system sane 5628dnl =================================================================== 5629AC_MSG_CHECKING([which sane header to use]) 5630if test -n "$with_system_sane_header" -o -n "$with_system_headers" && \ 5631 test "$with_system_sane_header" != "no"; then 5632 AC_MSG_RESULT([external]) 5633 SYSTEM_SANE_HEADER=YES 5634 AC_CHECK_HEADER(sane/sane.h, [], 5635 [AC_MSG_ERROR(sane not found. install sane)], []) 5636else 5637 AC_MSG_RESULT([internal]) 5638 SYSTEM_SANE_HEADER=NO 5639 BUILD_TYPE="$BUILD_TYPE SANE" 5640fi 5641AC_SUBST(SYSTEM_SANE_HEADER) 5642 5643dnl =================================================================== 5644dnl Check for system icu 5645dnl =================================================================== 5646AC_MSG_CHECKING([which icu to use]) 5647if test -n "$with_system_icu" -o -n "$with_system_libs" && \ 5648 test "$with_system_icu" != "no"; then 5649 AC_MSG_RESULT([external]) 5650 SYSTEM_ICU=YES 5651 AC_LANG_PUSH([C++]) 5652 AC_MSG_CHECKING([for unicode/rbbi.h]) 5653 AC_PREPROC_IFELSE([AC_LANG_SOURCE([[unicode/rbbi.h]])],[AC_MSG_RESULT(checked.)],[AC_MSG_ERROR(icu headers not found.)]) 5654 AC_LANG_POP([C++]) 5655 AC_PATH_PROG(SYSTEM_GENBRK, genbrk, [], [$PATH:/usr/sbin:/sbin]) 5656 if test -z "$SYSTEM_GENBRK"; then 5657 AC_MSG_ERROR([\"genbrk\" not found in \$PATH, install the icu development tool \"genbrk"\]) 5658 fi 5659 AC_PATH_PROG(SYSTEM_GENCCODE, genccode, [], [$PATH:/usr/sbin:/sbin]) 5660 if test -z "$SYSTEM_GENCCODE"; then 5661 AC_MSG_ERROR([\"genccode\" not found in \$PATH, install the icu development tool \"genccode"\]) 5662 fi 5663 AC_PATH_PROG(SYSTEM_GENCMN, gencmn, [], [$PATH:/usr/sbin:/sbin]) 5664 if test -z "$SYSTEM_GENCMN"; then 5665 AC_MSG_ERROR([\"gencmn\" not found in \$PATH, install the icu development tool \"gencmn"\]) 5666 fi 5667 5668 AC_PATH_PROG( ICUCONFIG, icu-config) 5669 AC_MSG_CHECKING([ICU version]) 5670 if test "$_os" = "OS2"; then 5671 ICU_MAJOR=4 5672 else 5673 ICU_VERSION=`$ICUCONFIG --version` 5674 ICU_MAJOR=`$ICUCONFIG --version | cut -d"." -f1` 5675 ICU_MINOR=`$ICUCONFIG --version | cut -d"." -f2` 5676 ICU_MICRO=`$ICUCONFIG --version | cut -d"." -f3` 5677 ICU_CFLAGS=`$ICUCONFIG --cppflags` 5678 fi 5679 5680 if test "$ICU_MAJOR" -ge "4"; then 5681 AC_MSG_RESULT([OK]) 5682 else 5683 AC_MSG_ERROR([not suitable, only >= 4.0 supported currently]) 5684 fi 5685 5686else 5687 AC_MSG_RESULT([internal]) 5688 SYSTEM_ICU=NO 5689 BUILD_TYPE="$BUILD_TYPE ICU" 5690fi 5691AC_SUBST(SYSTEM_ICU) 5692AC_SUBST(SYSTEM_GENBRK) 5693AC_SUBST(SYSTEM_GENCCODE) 5694AC_SUBST(SYSTEM_GENCMN) 5695AC_SUBST(ICU_MAJOR) 5696AC_SUBST(ICU_MINOR) 5697AC_SUBST(ICU_MICRO) 5698AC_SUBST(ICU_CFLAGS) 5699 5700dnl =================================================================== 5701dnl Graphite 5702dnl =================================================================== 5703 5704ENABLE_GRAPHITE="FALSE" 5705AC_MSG_CHECKING([whether to enable graphite support]) 5706if test "x$enable_graphite" = "xyes" -a \( "$_os" = "WINNT" -o "$_os" = "Linux" -o "$_os" = "FreeBSD" \) ; then 5707 AC_MSG_RESULT([yes]) 5708 ENABLE_GRAPHITE="TRUE" 5709 AC_MSG_CHECKING([which graphite to use]) 5710 if test -n "$with_system_graphite" -o -n "$with_system_libs" && \ 5711 test "$with_system_graphite" != "no"; then 5712 AC_MSG_RESULT([external]) 5713 SYSTEM_GRAPHITE=YES 5714 PKG_CHECK_MODULES( GRAPHITE, silgraphite ) 5715 else 5716 AC_MSG_RESULT([internal]) 5717 SYSTEM_GRAPHITE=NO 5718 BUILD_TYPE="$BUILD_TYPE GRAPHITE" 5719 fi 5720else 5721 AC_MSG_RESULT([no]) 5722 ENABLE_GRAPHITE="FALSE" 5723fi 5724AC_SUBST(ENABLE_GRAPHITE) 5725AC_SUBST(SYSTEM_GRAPHITE) 5726AC_SUBST(GRAPHITE_LIBS) 5727AC_SUBST(GRAPHITE_CFLAGS) 5728 5729 5730dnl =================================================================== 5731dnl Checks for libraries. 5732dnl =================================================================== 5733dnl Check for Mac OS X native GUI, which may is now required; the X11 build is no longer supported 5734dnl See if we have the AppKit framework for building with Quartz graphics. 5735 5736if test "$_os" = "Darwin"; then 5737 if test "x$with_x" = "xyes"; then 5738 AC_MSG_ERROR([X11 build is no longer supported on MacOSX, please use the native aqua build]) 5739 else 5740 AC_MSG_CHECKING([for /System/Library/Frameworks/AppKit.framework]) 5741 if test -d "/System/Library/Frameworks/AppKit.framework/"; then 5742 AC_MSG_RESULT([yes]) 5743 x_includes="no_x_includes" 5744 x_libraries="no_x_libraries" 5745 dnl disable some things used on other Unix versions but not on the aqua build 5746 enable_gtk=no 5747 enable_cups=no 5748 ENABLE_CUPS="" 5749 AC_SUBST(ENABLE_CUPS) 5750 else 5751 AC_MSG_ERROR([No AppKit.framewrok found]) 5752 fi 5753 fi 5754fi 5755 5756dnl *************************************** 5757dnl testing for X libraries and includes... 5758dnl *************************************** 5759if test "$_os" = "Darwin" -a "x$x_includes" = "xno_x_includes"; then 5760 echo "Do Nothing for _os = Darwin" 5761 dnl Mac OS X using Aqua graphics. Don't check for X11. 5762 : 5763elif test "$_os" = "OS2" ; then 5764 echo "Do Nothing for _os = OS2. Don't check for X11." 5765 dnl OS/2 uses native graphics. Don't check for X11. 5766 : 5767elif test "$_os" != "WINNT" ; then 5768 AC_PATH_X 5769 AC_PATH_XTRA 5770 CPPFLAGS="$CPPFLAGS $X_CFLAGS" 5771 5772 if test "x$x_includes" = "x"; then 5773 x_includes="default_x_includes" 5774 fi 5775 if test "x$x_libraries" = "x"; then 5776 x_libraries="default_x_libraries" 5777 fi 5778 dnl The variables $x_libraries and $x_includes are set. 5779 if test -z "$x_libraries"; then 5780 AC_MSG_ERROR([No X libraries found]) # Exit 5781 fi 5782 if test -z "$x_includes"; then 5783 AC_MSG_ERROR([No X includes found]) # Exit 5784 fi 5785 CFLAGS=$X_CFLAGS 5786 LDFLAGS="$X_LDFLAGS $X_LIBS" 5787 AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", [AC_MSG_ERROR([X Development libraries not found])]) 5788 dnl Check if the XauDisposeAuth symbol is provided by libXau. 5789 AC_CHECK_LIB(Xau, XauDisposeAuth, XAU_LIBS="-lXau", []) 5790else 5791 x_includes="no_x_includes" 5792 x_libraries="no_x_libraries" 5793fi 5794if test -z "$x_includes"; then 5795 x_includes="no_x_includes" 5796fi 5797if test -z "$x_libraries"; then 5798 x_libraries="no_x_libraries" 5799fi 5800if test "$x_includes" = "default_x_includes"; then 5801 XINC="/usr/include" 5802else 5803 XINC="$x_includes" 5804fi 5805AC_SUBST(XINC) 5806if test "$x_libraries" = "default_x_libraries"; then 5807 XLIB=`$PKG_CONFIG --variable=libdir x11` 5808 if test "x$XLIB" = x; then 5809 XLIB="/usr/lib" 5810 fi 5811else 5812 XLIB="$x_libraries" 5813fi 5814AC_SUBST(XLIB) 5815AC_SUBST(XAU_LIBS) 5816 5817dnl =================================================================== 5818dnl Check if fontconfig/fontconfig.h is available 5819dnl =================================================================== 5820if test "$ENABLE_FONTCONFIG" = "TRUE" ; then 5821 AC_CHECK_HEADER(fontconfig/fontconfig.h, [], 5822 [AC_MSG_ERROR([fontconfig/fontconfig.h could not be found. libfontconfig1-dev or fontconfig???-devel missing?])], []) 5823 AC_MSG_CHECKING([whether fontconfig is >= 2.2.0]) 5824 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 5825#include <fontconfig/fontconfig.h> 5826 5827int main(int argc, char **argv) { 5828 if(FC_MAJOR > 2 || (FC_MAJOR == 2 && FC_MINOR >= 2)) return 0; 5829 else return 1; 5830} 5831]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, fontconfig >= 2.2.0 needed])],[]) 5832fi 5833 5834dnl =================================================================== 5835dnl Check for system Xrender 5836dnl =================================================================== 5837AC_MSG_CHECKING([whether to link to Xrender]) 5838if test -n "$enable_xrender_link" -a "$enable_xrender_link" != "no"; then 5839 AC_MSG_RESULT([yes]) 5840 XRENDER_LINK=YES 5841 with_system_xrender_headers=yes 5842else 5843 AC_MSG_RESULT([no, dynamically open it]) 5844 XRENDER_LINK=NO 5845fi 5846AC_MSG_CHECKING([which Xrender headers to use]) 5847if test -n "$with_system_xrender_headers" -o -n "$with_system_headers" && \ 5848 test "$with_system_xrender_headers" != "no"; then 5849 AC_MSG_RESULT([external]) 5850 SYSTEM_XRENDER_HEADERS=YES 5851 AC_CHECK_HEADER(X11/extensions/Xrender.h, [], 5852 [AC_MSG_ERROR(Xrender not found. install X)], []) 5853else 5854 AC_MSG_RESULT([internal]) 5855 SYSTEM_XRENDER_HEADERS=NO 5856 BUILD_TYPE="$BUILD_TYPE X11_EXTENSIONS" 5857fi 5858if test "$XRENDER_LINK" = "YES"; then 5859 AC_CHECK_LIB(Xrender, XRenderQueryVersion, [], 5860 [AC_MSG_ERROR(libXrender not found or functional)], []) 5861fi 5862AC_SUBST(SYSTEM_XRENDER_HEADERS) 5863AC_SUBST(XRENDER_LINK) 5864 5865dnl =================================================================== 5866dnl Check for XRandr 5867dnl =================================================================== 5868AC_MSG_CHECKING([whether to enable RandR support]) 5869if test "$test_randr" = "yes" -a \( "$enable_randr" = "yes" -o "$enable_randr" = "TRUE" \) ; then 5870 if test -z "$enable_randr_link" -o "$enable_randr_link" = "no"; then 5871 XRANDR_DLOPEN="TRUE" 5872 AC_MSG_RESULT([resorting to dlopen libXrandr at runtime]) 5873 else 5874 XRANDR_DLOPEN="FALSE" 5875 PKG_CHECK_MODULES(XRANDR, xrandr >= 1.2, ENABLE_RANDR="TRUE", ENABLE_RANDR="") 5876 if test "$ENABLE_RANDR" != "TRUE"; then 5877 AC_CHECK_HEADER(X11/extensions/Xrandr.h, [], 5878 [AC_MSG_ERROR([X11/extensions/Xrandr.h could not be found. X11 dev missing?])], []) 5879 XRANDR_CFLAGS=" " 5880 AC_CHECK_LIB(Xrandr, XRRQueryExtension, [], 5881 [ AC_MSG_ERROR(libXrandr not found or functional) ], []) 5882 XRANDR_LIBS="-lXrandr " 5883 ENABLE_RANDR="TRUE" 5884 AC_MSG_RESULT([enabling RandR support]) 5885 fi 5886 fi 5887else 5888 ENABLE_RANDR="" 5889 AC_MSG_RESULT([no]) 5890fi 5891AC_SUBST(XRANDR_DLOPEN) 5892AC_SUBST(XRANDR_CFLAGS) 5893AC_SUBST(XRANDR_LIBS) 5894AC_SUBST(ENABLE_RANDR) 5895 5896dnl =================================================================== 5897dnl Check for system nss 5898dnl =================================================================== 5899AC_MSG_CHECKING([which libnss to use]) 5900if test -n "$with_system_nss" -o -n "$with_system_libs" && test "$with_system_nss" != "no"; then 5901 AC_MSG_RESULT([external]) 5902 PKG_CHECK_MODULES( NSS, nss ) 5903 SYSTEM_NSS=YES 5904else 5905 AC_MSG_RESULT([internal]) 5906 SYSTEM_NSS=NO 5907 BUILD_TYPE="$BUILD_TYPE NSS" 5908fi 5909AC_SUBST(SYSTEM_NSS) 5910AC_SUBST(NSS_CFLAGS) 5911AC_SUBST(NSS_LIBS) 5912 5913dnl =================================================================== 5914dnl Check for system redland 5915dnl =================================================================== 5916AC_MSG_CHECKING([which redland library to use]) 5917if test -n "$with_system_redland" -o -n "$with_system_libs" && \ 5918 test "$with_system_redland" != "no"; then 5919 AC_MSG_RESULT([external]) 5920 SYSTEM_REDLAND=YES 5921 dnl versions before 1.0.8 write RDF/XML that is useless for ODF (@xml:base) 5922 PKG_CHECK_MODULES(REDLAND, redland >= 1.0.8) 5923else 5924 AC_MSG_RESULT([internal]) 5925 BUILD_TYPE="$BUILD_TYPE REDLAND" 5926 SYSTEM_REDLAND=NO 5927fi 5928AC_SUBST(SYSTEM_REDLAND) 5929AC_SUBST(REDLAND_CFLAGS) 5930AC_SUBST(REDLAND_LIBS) 5931 5932dnl =================================================================== 5933dnl Check for hunspell 5934dnl =================================================================== 5935AC_MSG_CHECKING([whether to build the Spell Checking component]) 5936ENABLE_HUNSPELL= 5937 5938if test "x$enable_hunspell" != "xno" ; then 5939 AC_MSG_CHECKING([which libhunspell to use]) 5940 if test -n "$with_system_hunspell" -o -n "$with_system_libs" && \ 5941 test "$with_system_hunspell" != "no"; then 5942 AC_MSG_RESULT([external]) 5943 SYSTEM_HUNSPELL=YES 5944 AC_LANG_PUSH([C++]) 5945 PKG_CHECK_MODULES(HUNSPELL, hunspell, HUNSPELL_PC="TRUE", HUNSPELL_PC="" ) 5946 if test "$HUNSPELL_PC" != "TRUE"; then 5947 AC_CHECK_HEADER(hunspell.hxx, [], 5948 [AC_CHECK_HEADER(hunspell/hunspell.hxx, [ HUNSPELL_CFLAGS=-I/usr/include/hunspell ], 5949 [AC_MSG_ERROR(hunspell headers not found.)], []) 5950 ], []) 5951 AC_CHECK_LIB(hunspell, main, [], 5952 [ AC_MSG_ERROR(hunspell library not found.) ], []) 5953 HUNSPELL_LIBS=-lhunspell 5954 fi 5955 AC_LANG_POP([C++]) 5956 else 5957 AC_MSG_RESULT([internal]) 5958 SYSTEM_HUNSPELL=NO 5959 BUILD_TYPE="$BUILD_TYPE HUNSPELL" 5960 fi 5961 ENABLE_HUNSPELL=YES 5962 AC_SUBST(SYSTEM_HUNSPELL) 5963 AC_SUBST(HUNSPELL_CFLAGS) 5964 AC_SUBST(HUNSPELL_LIBS) 5965else 5966 AC_MSG_RESULT([no]) 5967fi 5968AC_SUBST(ENABLE_HUNSPELL) 5969 5970dnl =================================================================== 5971dnl Checking for libhyphen 5972dnl =================================================================== 5973AC_MSG_CHECKING([whether to build the Hyphenator component]) 5974ENABLE_HYPHEN= 5975 5976if test "x$enable_hyphen" != "xno" ; then 5977 AC_MSG_CHECKING([which libhyphen to use]) 5978 if test -n "$with_system_hyphen" -o -n "$with_system_libs" && \ 5979 test "$with_system_hyphen" != "no"; then 5980 AC_MSG_RESULT([external]) 5981 SYSTEM_HYPH=YES 5982 AC_CHECK_HEADER(hyphen.h, [], 5983 [ AC_MSG_ERROR(libhyphen headers not found.)], []) 5984 AC_CHECK_MEMBER(struct _HyphenDict.cset, [], 5985 [ AC_MSG_ERROR(no. You are sure you have libhyphen headers?)], 5986 [#include <hyphen.h>]) 5987 AC_CHECK_LIB(hyphen, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyphen], 5988 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5989 if test -z "$HYPHEN_LIB"; then 5990 AC_CHECK_LIB(hyph, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyph], 5991 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5992 fi 5993 if test -z "$HYPHEN_LIB"; then 5994 AC_CHECK_LIB(hnj, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhnj], 5995 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5996 fi 5997 else 5998 AC_MSG_RESULT([internal]) 5999 SYSTEM_HYPH=NO 6000 BUILD_TYPE="$BUILD_TYPE HYPHEN" 6001 fi 6002 ENABLE_HYPHEN=YES 6003 AC_SUBST(SYSTEM_HYPH) 6004 AC_SUBST(HYPHEN_LIB) 6005else 6006 AC_MSG_RESULT([no]) 6007fi 6008AC_SUBST(ENABLE_HYPHEN) 6009 6010 6011#dnl =================================================================== 6012#dnl Check whether we are allowed to bundle dictionaries and whether 6013#dnl hunspell is available. 6014#dnl =================================================================== 6015ENABLE_BUNDLED_DICTIONARIES= 6016if test "x$enable_bundled_dictionaries" != "xno" -a "x$ENABLE_HUNSPELL" = "xYES"; then 6017 ENABLE_BUNDLED_DICTIONARIES=YES 6018fi 6019AC_SUBST(ENABLE_BUNDLED_DICTIONARIES) 6020 6021 6022 6023dnl =================================================================== 6024dnl Checking for mythes 6025dnl =================================================================== 6026AC_MSG_CHECKING([which mythes to use]) 6027if test -n "$with_system_mythes" -o -n "$with_system_libs" && \ 6028 test "$with_system_mythes" != "no"; then 6029 AC_MSG_RESULT([external]) 6030 SYSTEM_MYTHES=YES 6031 AC_LANG_PUSH([C++]) 6032 PKG_CHECK_MODULES(MYTHES, mythes, MYTHES_PKGCONFIG=yes, MYTHES_PKGCONFIG=no) 6033 if test "$MYTHES_PKGCONFIG" = "no"; then 6034 AC_CHECK_HEADER(mythes.hxx, [], 6035 [ AC_MSG_ERROR(mythes.hxx headers not found.)], []) 6036 AC_CHECK_LIB(mythes-1.2, main, [], 6037 [ MYTHES_FOUND=no], []) 6038 if test "$MYTHES_FOUND" = "no"; then 6039 AC_CHECK_LIB(mythes, main, [MYTHES_FOUND=yes], 6040 [ MYTHES_FOUND=no], []) 6041 fi 6042 if test "$MYTHES_FOUND" = "no"; then 6043 AC_MSG_ERROR([mythes library not found!.]) 6044 fi 6045 fi 6046 AC_LANG_POP([C++]) 6047else 6048 AC_MSG_RESULT([internal]) 6049 SYSTEM_MYTHES=NO 6050 BUILD_TYPE="$BUILD_TYPE MYTHES" 6051fi 6052AC_SUBST(SYSTEM_MYTHES) 6053AC_SUBST(MYTHES_CFLAGS) 6054AC_SUBST(MYTHES_LIBS) 6055 6056 6057dnl =================================================================== 6058dnl Checking for libtextcat 6059dnl =================================================================== 6060AC_MSG_CHECKING([which libtextcat to use]) 6061if test -n "$with_system_libtextcat" && test "$with_system_libtextcat" != "no"; then 6062 AC_MSG_RESULT([external]) 6063 SYSTEM_LIBTEXTCAT=YES 6064 AC_CHECK_HEADER(libtextcat/textcat.h, [], 6065 [ AC_MSG_ERROR(libtextcat headers not found.)], []) 6066 AC_CHECK_LIB(textcat, special_textcat_Init, , 6067 [ AC_MSG_ERROR(libtextcat library not found or not suitable. libtextcat typically needs to be patched)], []) 6068else 6069 AC_MSG_RESULT([internal]) 6070 SYSTEM_LIBTEXTCAT=NO 6071 BUILD_TYPE="$BUILD_TYPE LIBTEXTCAT" 6072fi 6073AC_SUBST(SYSTEM_LIBTEXTCAT) 6074 6075AC_MSG_CHECKING([which libtextcat data directory to use]) 6076if test -n "$with_system_libtextcat_data" && test "$with_system_libtextcat_data" != "no"; then 6077 if test "$with_system_libtextcat_data" = "yes"; then 6078 SYSTEM_LIBTEXTCAT_DATA=file:///usr/share/libtextcat 6079 else 6080 SYSTEM_LIBTEXTCAT_DATA=file://$with_system_libtextcat_data 6081 fi 6082 AC_MSG_RESULT([$SYSTEM_LIBTEXTCAT_DATA]) 6083else 6084 AC_MSG_RESULT([internal]) 6085 BUILD_TYPE="$BUILD_TYPE LIBTEXTCATDATA" 6086fi 6087AC_SUBST(SYSTEM_LIBTEXTCAT_DATA) 6088 6089dnl *************************************** 6090dnl testing libc version for Linux... 6091dnl *************************************** 6092if test "$_os" = "Linux"; then 6093 AC_MSG_CHECKING([whether libc is >= 2.1.1]) 6094 exec 6>/dev/null # no output 6095 AC_CHECK_LIB(c, gnu_get_libc_version, HAVE_LIBC=yes; export HAVE_LIBC) 6096 exec 6>&1 # output on again 6097 if test "$HAVE_LIBC"; then 6098 AC_MSG_RESULT([yes]) 6099 else 6100 AC_MSG_ERROR([no, upgrade libc]) 6101 fi 6102fi 6103 6104if test "$_os" != "WNT"; then 6105 AC_CHECK_FUNCS(getopt, HAVE_GETOPT=YES, [HAVE_GETOPT=NO]) 6106 AC_CHECK_FUNCS(readdir_r, HAVE_READDIR_R=YES, [HAVE_READDIR_R=NO]) 6107 if test "$HAVE_GETOPT" = "YES" -a "$HAVE_READDIR_R" = "YES"; then 6108 SYSTEM_LIBC=YES 6109 fi 6110else 6111 HAVE_GETOPT=NO 6112 HAVE_READDIR_R=NO 6113 SYSTEM_LIBC=YES 6114fi 6115AC_SUBST(HAVE_GETOPT) 6116AC_SUBST(HAVE_READDIR_R) 6117AC_SUBST(SYSTEM_LIBC) 6118 6119dnl ========================================= 6120dnl Check for the Microsoft Platform SDK. 6121dnl ========================================= 6122dnl FIXME: I don't know yet if PSDK works with MinGW, keep it until I know better, 6123dnl and add "-a \( "$WITH_MINGWIN" != "yes" \)" then 6124if test \( "$_os" = "WINNT" \) -a \( -z "$MSVC_MODERN" \) ; then 6125 AC_MSG_CHECKING([for PSDK files]) 6126 if test -z "$with_psdk_home"; then 6127 # This first line will detect a February 2003 Microsoft Platform SDK 6128 PSDK_HOME=`$OOWINTOOL --psdk-home` 6129 # But there might be also an April 2005 PSDK, unfortunately MS changed 6130 # the registry entry. (we prefer the old version!?) 6131 if test -z "$PSDK_HOME"; then 6132 PSDK_HOME=`cat /proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MicrosoftSDK/InstalledSDKs/*/Install\ Dir 2> /dev/null | tr '\000' '\n' | head -n 1` 6133 fi 6134 # normalize if found 6135 if test -n "$PSDK_HOME"; then 6136 PSDK_HOME=`cygpath -d "$PSDK_HOME"` 6137 PSDK_HOME=`cygpath -u "$PSDK_HOME"` 6138 fi 6139 else 6140 PSDK_HOME=`cygpath -u "$with_psdk_home"` 6141 fi 6142 # Remove a possible trailing backslash 6143 PSDK_HOME=`echo $PSDK_HOME | $SED 's/\/$//'` 6144 # Problem with current PSDK (iz 49865) 6145 if test -f "$PSDK_HOME/Lib/libcp.lib"; then 6146 AC_MSG_ERROR([ 6147 6148Some modules do not build correctly with MS Platform SDK - April 2005 6149Edition if the library ($PSDK_HOME/Lib/libcp.lib) is found. 6150Remove/rename/backup that file and restart configure. Details about this 6151problem can be found in issue 49856.]) 6152 fi 6153# Windows SDK has different headers 6154 if test \( -f "$PSDK_HOME/Include/adoint.h" \) \ 6155 -a \( -f "$PSDK_HOME/Include/SqlUcode.h" \) \ 6156 -a \( -f "$PSDK_HOME/Include/usp10.h" \); then 6157 HAVE_PSDK_H="yes" 6158 else 6159 HAVE_PSDK_H="no" 6160 fi 6161 if test -f "$PSDK_HOME/lib/unicows.lib"; then 6162 HAVE_PSDK_LIB="yes" 6163 else 6164 HAVE_PSDK_LIB="no" 6165 fi 6166 if test "$HAVE_PSDK_H" = "no" -o "$HAVE_PSDK_LIB" = "no"; then 6167 AC_MSG_ERROR([Some (all?) PSDK files not found, please check if all needed Platform SDKs 6168are installed or use --with-psdk-home .]) 6169 fi 6170 if test ! -x "$PSDK_HOME/bin/msiinfo.exe" \ 6171 -o ! -x "$PSDK_HOME/bin/msidb.exe" \ 6172 -o ! -x "$PSDK_HOME/bin/uuidgen.exe" \ 6173 -o ! -x "$PSDK_HOME/bin/msitran.exe" ; then 6174 AC_MSG_ERROR([Some (all) files of the Windows Installer SDK are missing, please install.]) 6175 fi 6176 AC_MSG_RESULT([SDK files found ...)]) 6177dnl Check if this is the right SDK. 6178 if echo $PSDK_HOME | $GREP "v6.1" >/dev/null 2>/dev/null; then 6179 AC_MSG_RESULT([Found Windows SDK 6.1 ($PSDK_HOME)]) 6180 WINDOWS_VISTA_PSDK=TRUE 6181 elif echo $PSDK_HOME | $GREP "v6.0" >/dev/null 2>/dev/null; then 6182 AC_MSG_RESULT([Found Windows SDK 6.0 ($PSDK_HOME)]) 6183 WINDOWS_VISTA_PSDK=TRUE 6184 elif echo $PSDK_HOME | $GREP "v7.0" >/dev/null 2>/dev/null; then 6185 AC_MSG_RESULT([Found Windows SDK 7.0 ($PSDK_HOME)]) 6186 WINDOWS_VISTA_PSDK=TRUE 6187 else 6188 AC_MSG_RESULT([Found Legacy Windows Platform SDK ($PSDK_HOME)]) 6189 fi 6190fi 6191AC_SUBST(PSDK_HOME) 6192AC_SUBST(WINDOWS_VISTA_PSDK) 6193 6194dnl ========================================= 6195dnl Check for the Microsoft DirectX SDK. 6196dnl ========================================= 6197if test \( "$_os" = "WINNT" \) ; then 6198 AC_MSG_CHECKING([for DirectX SDK files]) 6199 if test -z "$with_directx_home"; then 6200 dnl A standard installation of the DirectX SDK sets $DXSDK_DIR 6201 if test -n "$DXSDK_DIR"; then 6202 DIRECTXSDK_HOME=`cygpath -d "$DXSDK_DIR"` 6203 DIRECTXSDK_HOME=`cygpath -u "$DIRECTXSDK_HOME"` 6204 fi 6205 # At this point $DIRECTXSDK_HOME might still be undefined. This will lead to 6206 # the "DirectX SDK files not found" error later 6207 else 6208 DIRECTXSDK_HOME=`cygpath -u "$with_directx_home"` 6209 fi 6210 # Remove a possible trailing backslash 6211 DIRECTXSDK_HOME=`echo $DIRECTXSDK_HOME | $SED 's/\/$//'` 6212 6213 if test -f "$DIRECTXSDK_HOME/Include/ddraw.h" ; then 6214 HAVE_DIRECTDRAW_H="yes" 6215 else 6216 HAVE_DIRECTDRAW_H="no" 6217 fi 6218 if test -f "$DIRECTXSDK_HOME/Include/d3d9.h" ; then 6219 HAVE_DIRECTXSDK_H="yes" 6220 else 6221 HAVE_DIRECTXSDK_H="no" 6222 fi 6223 6224 # MS changed the location of the libraries with dec 2004 directx sdk 6225 if test -d "$DIRECTXSDK_HOME/lib/x86" ; then 6226 DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib/x86" 6227 else 6228 DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib" 6229 fi 6230 if test -f "$DIRECTXSDK_LIB/ddraw.lib" ; then 6231 HAVE_DIRECTDRAW_LIB="yes" 6232 else 6233 HAVE_DIRECTDRAW_LIB="no" 6234 fi 6235 if test -f "$DIRECTXSDK_LIB/d3d9.lib" ; then 6236 HAVE_DIRECTXSDK_LIB="yes" 6237 else 6238 HAVE_DIRECTXSDK_LIB="no" 6239 fi 6240 6241 if test "$HAVE_DIRECTDRAW_H" = "yes" -a "$HAVE_DIRECTDRAW_LIB" = "yes" ; then 6242 ENABLE_DIRECT_DRAW="TRUE" 6243 fi 6244 if test "$HAVE_DIRECTXSDK_H" = "yes" -a "$HAVE_DIRECTXSDK_LIB" = "yes" ; then 6245 HAVE_DIRECTXSDK="yes" 6246 else 6247 HAVE_DIRECTXSDK="no" 6248 fi 6249 6250 if test -n "$ENABLE_DIRECTX"; then 6251 if test "$HAVE_DIRECTDRAW" = "yes" -o "$HAVE_DIRECTXSDK" = "yes" ; then 6252 AC_MSG_RESULT([found]) 6253 else 6254 AC_MSG_ERROR([DirectX SDK files not found, please use --with-directx-home or --disable-directx.]) 6255 fi 6256 else 6257 DIRECTXSDK_HOME="" 6258 AC_MSG_RESULT([disabled]) 6259 fi 6260fi 6261AC_SUBST(ENABLE_DIRECT_DRAW) 6262AC_SUBST(DIRECTXSDK_HOME) 6263AC_SUBST(DIRECTXSDK_LIB) 6264 6265 6266dnl ============================================ 6267dnl Check for ATL and MFC 6268dnl ============================================ 6269if test \( "$_os" = "WINNT" \) ; then 6270 AC_MSG_CHECKING([for ATL and MFC]) 6271 if test "$DISABLE_ATL" = "TRUE"; then 6272 AC_MSG_RESULT([ATL is disabled, nothing to check]) 6273 else 6274 AC_MSG_NOTICE([testing ATL/MFC libs and includes]) 6275 if test -z "$with_atl_include_dir"; then 6276 ATL_INCLUDE=$COMPATH/atlmfc/include 6277 else 6278 ATL_INCLUDE=`cygpath -u "$with_atl_include_dir"` 6279 fi 6280 if test -z "$with_atl_lib_dir"; then 6281 ATL_LIB=$COMPATH/atlmfc/lib 6282 ATL_LIB_X64=$COMPATH/atlmfc/lib/amd64 6283 else 6284 ATL_LIB=`cygpath -u "$with_atl_lib_dir"` 6285 ATL_LIB_X64=$ATL_LIB/../amd64 6286 fi 6287 if test -z "$with_mfc_include_dir"; then 6288 MFC_INCLUDE=$COMPATH/atlmfc/include 6289 else 6290 MFC_INCLUDE=`cygpath -u "$with_mfc_include_dir"` 6291 fi 6292 if test -z "$with_mfc_lib_dir"; then 6293 MFC_LIB=$COMPATH/atlmfc/lib 6294 else 6295 MFC_LIB=`cygpath -u "$with_mfc_lib_dir"` 6296 fi 6297 6298 ATL_INCLUDE=`echo $ATL_INCLUDE | $SED 's/\/$//'` 6299 ATL_LIB=`echo $ATL_LIB | $SED 's/\/$//'` 6300 ATL_LIB_X64=`echo $ATL_LIB_X64 | $SED 's/\/$//'` 6301 MFC_INCLUDE=`echo $MFC_INCLUDE | $SED 's/\/$//'` 6302 MFC_LIB=`echo $MFC_LIB | $SED 's/\/$//'` 6303 6304 AC_MSG_NOTICE([looking for atlbase.h in "$ATL_INCLUDE"]) 6305 if test -f "$ATL_INCLUDE/atlbase.h"; then 6306 HAVE_ATL_H="yes" 6307 else 6308 HAVE_ATL_H="no" 6309 fi 6310 AC_MSG_NOTICE([found atlbase.h in "$ATL_INCLUDE"? "$HAVE_ATL_H"]) 6311 6312 AC_MSG_NOTICE([looking for afx.h in "$MFC_INCLUDE"]) 6313 if test -f "$MFC_INCLUDE/afx.h"; then 6314 HAVE_MFC_H="yes" 6315 else 6316 HAVE_MFC_H="no" 6317 fi 6318 AC_MSG_NOTICE([found afx.h in "$MFC_INCLUDE"? "$HAVE_MFC_H"]) 6319 6320 AC_MSG_NOTICE([looking for atls.lib in "$ATL_LIB"]) 6321 if test -f "$ATL_LIB/atls.lib"; then 6322 HAVE_ATL_LIB="yes" 6323 AC_MSG_NOTICE([looking for atlthunk.lib in "$ATL_LIB"]) 6324 if test -f "$ATL_LIB/atlthunk.lib"; then 6325 HAVE_ATLTHUNK="YES" 6326 else 6327 HAVE_ATLTHUNK="NO" 6328 fi 6329 AC_MSG_NOTICE([found atlthunk.lib in "$ATL_LIB"? "$HAVE_ATLTHUNK"]) 6330 else 6331 HAVE_ATL_LIB="no" 6332 fi 6333 AC_MSG_NOTICE([found atls.lib in "$ATL_LIB"? "$HAVE_ATL_LIB"]) 6334 6335 dnl TODO check also MFC libraries, they seem to have different names 6336 dnl mfc42.lib mfc90.lib 6337 if test -d "$MFC_LIB"; then 6338 HAVE_MFC_LIB="yes" 6339 else 6340 HAVE_MFC_LIB="no" 6341 fi 6342 6343 if test "$HAVE_ATL_H" = "no" -o "$HAVE_MFC_H" = "no" -o "$HAVE_ATL_LIB" = "no" -o "$HAVE_MFC_LIB" = "no"; then 6344 ATL_INCLUDE= 6345 ATL_LIB= 6346 ATL_LIB_X64= 6347 MFC_INCLUDE= 6348 MFC_LIB= 6349 HAVE_ATL_LIB= 6350 dnl TODO shouldn't this be an error? 6351 DISABLE_ACTIVEX="TRUE" 6352 DISABLE_ATL="TRUE" 6353 AC_MSG_RESULT([ATL/MFC disabled]) 6354 else 6355 ATL_INCLUDE=`cygpath -dm "$ATL_INCLUDE"` 6356 ATL_LIB=`cygpath -dm "$ATL_LIB"` 6357 ATL_LIB_X64=`cygpath -dm "$ATL_LIB_X64"` 6358 MFC_INCLUDE=`cygpath -dm "$MFC_INCLUDE"` 6359 MFC_LIB=`cygpath -dm "$MFC_LIB"` 6360 AC_MSG_RESULT([ATL/MFC enabled]) 6361 fi 6362 fi 6363fi 6364AC_SUBST(ATL_INCLUDE) 6365AC_SUBST(ATL_LIB) 6366AC_SUBST(ATL_LIB_X64) 6367AC_SUBST(HAVE_ATLTHUNK) 6368AC_SUBST(MFC_INCLUDE) 6369AC_SUBST(MFC_LIB) 6370 6371 6372dnl ============================================ 6373dnl Check for Nullsoft Scriptable Install System 6374dnl ============================================ 6375NSIS_PATH="" 6376if test "$_os" = "WINNT" ; then 6377 AC_MSG_CHECKING([for NSIS]) 6378 AC_PATH_PROG(NSIS_PATH, nsis.exe) 6379 if test -n "$NSIS_PATH"; then 6380 NSIS_PATH=`dirname "$NSIS_PATH"` 6381 fi 6382 if test -n "$with_nsis_path"; then 6383 with_nsis_path=`cygpath -u "$with_nsis_path"` 6384 fi 6385 if test -e "$with_nsis_path/nsis.exe"; then 6386 NSIS_PATH="$with_nsis_path" 6387 fi 6388 nsistest=`$OOWINTOOL --nsis-dir`; 6389 if test -x "$nsistest/nsis.exe"; then 6390 NSIS_PATH="$nsistest" 6391 fi 6392 if test -z "$NSIS_PATH"; then 6393 AC_MSG_WARN([NSIS not found, no self contained installer will be build.]) 6394 echo "NSIS not found, no self contained installer will be build." >> warn 6395 else 6396 NSIS_PATH=`cygpath -d "$NSIS_PATH"` 6397 NSIS_PATH=`cygpath -u "$NSIS_PATH"` 6398 AC_MSG_RESULT([found ($NSIS_PATH)]) 6399 AC_MSG_CHECKING([whether NSIS version is >= 3.*]) 6400 nsis_version_string=`"$NSIS_PATH/makensis.exe" /VERSION | $SED -e s/^v//i` 6401 nsis_version_major=`echo $nsis_version_string | cut -d. -f1` 6402 nsis_version_minor=`echo $nsis_version_string | cut -d. -f2` 6403 if test "$nsis_version_major" -ge "3"; then 6404 AC_MSG_RESULT([found NSIS $nsis_version_major.$nsis_version_minor >= 3.*]) 6405 AC_MSG_CHECKING([whether NSIS was compiled with Unicode support]) 6406 if echo `"$NSIS_PATH/makensis.exe" /HDRINFO` | $EGREP "\bNSIS_UNICODE_MAKENSIS\b" 2>&1 >/dev/null; then 6407 AC_MSG_RESULT([NSIS version compiled with Unicode support.]) 6408 else 6409 NSIS_PATH="" 6410 AC_MSG_WARN([NSIS version compiled without Unicode support, no self contained installer will be build.]) 6411 fi 6412 else 6413 NSIS_PATH="" 6414 AC_MSG_WARN([NSIS version found is < 3.*, no self contained installer will be build.]) 6415 fi 6416 fi 6417fi 6418AC_SUBST(NSIS_PATH) 6419 6420dnl *************************************** 6421dnl testing bison and flex exist 6422dnl *************************************** 6423AC_PATH_PROG(BISON, bison) 6424if test -z "$BISON"; then 6425 AC_MSG_ERROR([no bison found in \$PATH, install bison]) 6426else 6427 AC_MSG_CHECKING([the bison version]) 6428 _bison_version=`$BISON --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 6429 _bison_longver=`echo $_bison_version | $AWK -F. '{ print \$1*1000+\$2}'` 6430 # Accept newer than 1.875 or older(equal) than 1.75 6431 if test "$_bison_longver" -ge 1875 -o "$_bison_longver" -le 1075; then 6432 if test "$_bison_version" = "1.875" ; then 6433 AC_MSG_WARN([suspect ($BISON $_bison_version)]) 6434 echo "Suspect ($BISON $_bison_version) suggest upgrade" >> warn 6435 else 6436 AC_MSG_RESULT([checked ($BISON $_bison_version)]) 6437 fi 6438 else 6439 AC_MSG_ERROR([failed ($BISON $_bison_version need 1.875+ (or 1.75 and older))]) 6440 fi 6441fi 6442AC_PATH_PROG(FLEX, flex) 6443if test -z "$FLEX"; then 6444 AC_MSG_ERROR([no flex found in \$PATH, install flex]) 6445fi 6446dnl *************************************** 6447dnl testing that patch exists 6448dnl *************************************** 6449AC_PATH_PROG(PATCH, patch) 6450if test -z "$PATCH"; then 6451 AC_MSG_ERROR([\"patch\" not found in \$PATH, install the development tool named\"patch"\]) 6452fi 6453 6454dnl On Solaris, FreeBSD or MacOS X, check if --with-gnu-patch was used 6455if test "$_os" = "SunOS" -o "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then 6456 if test -z "$with_gnu_patch"; then 6457 GNUPATCH=$PATCH 6458 else 6459 if test -x "$with_gnu_patch"; then 6460 GNUPATCH=$with_gnu_patch 6461 else 6462 AC_MSG_ERROR([--with-gnu-patch did not point to an executable]) 6463 fi 6464 fi 6465 6466 AC_MSG_CHECKING([whether $GNUPATCH is GNU patch]) 6467 if $GNUPATCH --version | $GREP "Free Software Foundation" >/dev/null 2>/dev/null; then 6468 AC_MSG_RESULT([yes]) 6469 else 6470 AC_MSG_ERROR([no, GNU patch needed. install or specify with --with-gnu-patch=/path/to/it]) 6471 fi 6472fi 6473 6474dnl We also need to check for --with-gnu-cp 6475 6476if test -z "$with_gnu_cp"; then 6477 # check the place where the GNU stuff is hidden on Solaris... 6478 if test -x /usr/gnu/bin/cp; then 6479 GNUCP=/usr/gnu/bin/cp 6480 else 6481 AC_PATH_PROGS(GNUCP, gnucp cp) 6482 fi 6483 if test -z $GNUCP; then 6484 AC_MSG_ERROR([Neither gnucp nor cp found. Install GNU cp and/or specify --with-gnu-cp=/path/to/it]) 6485 fi 6486else 6487 if test -x "$with_gnu_cp"; then 6488 GNUCP=$with_gnu_cp 6489 else 6490 AC_MSG_ERROR([--with-gnu-cp did not point to an executable]) 6491 fi 6492fi 6493 6494AC_MSG_CHECKING([whether $GNUCP is GNU cp from coreutils with preserve= support]) 6495if $GNUCP --version 2>/dev/null | $GREP "coreutils" >/dev/null 2>/dev/null; then 6496 AC_MSG_RESULT([yes]) 6497else 6498 AC_MSG_RESULT([no]) 6499 GNUCP='' 6500fi 6501 6502if test -z "$GNUCP"; then 6503 if test "$_os" = "SunOS"; then 6504 AC_MSG_ERROR([no, GNU cp from coreutils is needed. install or specify with --with-gnu-cp=/path/to/it]) 6505 else 6506 AC_MSG_RESULT([no GNU cp from coreutils found - using the system's cp command]) 6507 fi 6508fi 6509 6510AC_SUBST(GNUPATCH) 6511AC_SUBST(GNUCP) 6512 6513dnl *************************************** 6514dnl testing bash tools path on Windows 6515dnl *************************************** 6516if test "$_os" = "WINNT"; then 6517 CYGWIN_PATH="" 6518 AC_PATH_PROG(CYGWIN_PATH, bash) 6519 CYGWIN_PATH=`dirname "$CYGWIN_PATH"` 6520fi 6521if test -z "$CYGWIN_PATH"; then 6522 CYGWIN_PATH="NO_CYGWIN" 6523fi 6524AC_SUBST(CYGWIN_PATH) 6525 6526dnl *************************************** 6527dnl testing ml.exe assembler path 6528dnl *************************************** 6529if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 6530 dnl The 64 bit assembler is a different BINARY, not just a different copy: 6531 dnl ml.exe emits 32 bit objects and ml64.exe 64 bit ones, and the x64 6532 dnl toolset directory ships only the latter. Look for whichever one goes 6533 dnl with the target being built. 6534 if test "$BUILD_WIN64" = "TRUE" ; then 6535 ASM_EXE_NAME=ml64.exe 6536 else 6537 ASM_EXE_NAME=ml.exe 6538 fi 6539 AC_MSG_CHECKING([$ASM_EXE_NAME assembler path]) 6540 if test -n "$with_asm_home"; then 6541 with_asm_home=`cygpath -u "$with_asm_home"` 6542 fi 6543 if test ! -x "$with_asm_home/$ASM_EXE_NAME"; then 6544 AC_PATH_PROG(ML_EXE, $ASM_EXE_NAME) 6545 if test -z "$ML_EXE"; then 6546 if test -x "$with_cl_home/bin/$ASM_EXE_NAME"; then 6547 with_asm_home=$with_cl_home/bin 6548 AC_MSG_RESULT([found ($with_asm_home)]) 6549 elif test -x "$with_cl_home/$cl_subdirectory/$ASM_EXE_NAME"; then 6550 dnl A modern toolset keeps the assembler beside the compiler in the 6551 dnl split bin/Host<host>/<target> tree, and the target half matters: 6552 dnl the x86 directory has ml.exe, the x64 one has ml64.exe. Reusing 6553 dnl $cl_subdirectory is what keeps assembler and compiler on the same 6554 dnl target rather than merely on the same toolset. 6555 with_asm_home=$with_cl_home/$cl_subdirectory 6556 AC_MSG_RESULT([found ($with_asm_home)]) 6557 else 6558 AC_MSG_ERROR([Configure did not find $ASM_EXE_NAME assembler.]) 6559 fi 6560 else 6561 with_asm_home="ASM_IN_PATH" 6562 fi 6563 fi 6564 AC_MSG_RESULT([$ASM_HOME]) 6565else 6566 with_asm_home="NO_ASM_HOME" 6567fi 6568ASM_HOME="$with_asm_home" 6569AC_SUBST(ASM_HOME) 6570 6571dnl *************************************** 6572dnl testing nasm.exe assembler path 6573dnl *************************************** 6574if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes" -a "$SYSTEM_OPENSSL" = "NO"; then 6575 AC_MSG_CHECKING([nasm.exe assembler path]) 6576 if test -n "$with_nasm_home"; then 6577 with_nasm_home=`cygpath -u "$with_nasm_home"` 6578 fi 6579 if test ! -x "$with_nasm_home/nasm.exe"; then 6580 AC_PATH_PROG(NASM_EXE, nasm.exe) 6581 if test -z "$NASM_EXE"; then 6582 with_nasm_home="NO_NASM_HOME" 6583 AC_MSG_ERROR([NASM is required to build on Windows, please install or use --with-nasm-home],,) 6584 else 6585 with_nasm_home="NASM_IN_PATH" 6586 fi 6587 fi 6588 AC_MSG_RESULT([$NASM_HOME]) 6589else 6590 with_nasm_home="NO_NASM_HOME" 6591fi 6592NASM_HOME="$with_nasm_home" 6593AC_SUBST(NASM_HOME) 6594 6595dnl =================================================================== 6596dnl testing handle deprecated unzip switch 6597dnl =================================================================== 6598if test -z "$with_zip_home"; then 6599 with_zip_home="$with_unzip_home" 6600fi 6601dnl =================================================================== 6602dnl Zip will be found where you tell me to find it 6603dnl =================================================================== 6604if test -n "$with_zip_home" ; then 6605 if test "$_os" = "WINNT"; then 6606 with_zip_home=`cygpath -u "$with_zip_home"` 6607 fi 6608 ZIP="$with_zip_home/zip" 6609 UNZIP="$with_zip_home/unzip" 6610 ZIP_HOME="$with_zip_home" 6611else 6612 AC_PATH_PROG(ZIP, zip) 6613 AC_PATH_PROG(UNZIP, unzip) 6614 ZIP_HOME=`dirname "$ZIP"` 6615fi 6616dnl =================================================================== 6617dnl Zip must be available or else it is an error, all platforms 6618dnl =================================================================== 6619if test -z "$ZIP" -o -z "$UNZIP"; then 6620 AC_MSG_ERROR([Zip/Unzip are required to build, please install or use --with-zip-home],,) 6621fi 6622if "$ZIP" -FS < /dev/null 2>&1 | $EGREP "no such option: S" > /dev/null; then 6623 AC_MSG_ERROR([Zip version 3.0 or newer is required to build, please install or use --with-zip-home],,) 6624fi 6625 6626dnl =================================================================== 6627dnl Zip must be a specific type for different build types. 6628dnl =================================================================== 6629if test "$_os" = "WINNT"; then 6630 if test -n "`$ZIP -h | $GREP -i WinNT`" ; then 6631AC_MSG_ERROR([$ZIP found in the path is not the required cygwin version of Info-ZIPs zip.exe.]) 6632 fi 6633fi 6634AC_SUBST(ZIP_HOME) 6635 6636dnl =================================================================== 6637dnl Windows builds need dbghelp.dll in external/dbghelp/ 6638dnl =================================================================== 6639if test "$_os" = "WINNT"; then 6640 AC_MSG_CHECKING([for dbghelp.dll]) 6641 if test -x ./external/dbghelp/dbghelp.dll; then 6642 AC_MSG_RESULT([found and executable]) 6643 else 6644 AC_MSG_ERROR([dbghelp.dll is missing in external/dbghelp/. 6645Get it from the Microsoft site and put it into external/dbghelp. 6646(Note: Microsoft seems to enjoy changing the exact location of this file. You 6647may have to search Microsoft's website.) Last time it was seen at: 6648<https://www.microsoft.com/downloads/release.asp?releaseid=30682>.]) 6649 fi 6650fi 6651 6652dnl =================================================================== 6653dnl Windows builds need vcredist_x*.exe in external/vcredist/ 6654dnl =================================================================== 6655WITH_VC_REDIST="" 6656 6657if test "$_os" = "WINNT"; then 6658 AC_MSG_CHECKING([for vcredist_x86.exe]) 6659 if test -x ./external/vcredist/vcredist_x86.exe; then 6660 AC_MSG_RESULT([found and executable]) 6661 else 6662 AC_MSG_ERROR([ vcredist_x86.exe is missing in external/vcredist/. 6663Get it from the Microsoft site and put it into external/vcredist. You can try 6664to download it from https://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.]) 6665 fi 6666 AC_MSG_CHECKING([for vcredist_x64.exe]) 6667 if test -x ./external/vcredist/vcredist_x64.exe; then 6668 AC_MSG_RESULT([found and executable]) 6669 else 6670 AC_MSG_ERROR([ vcredist_x64.exe is missing in external/vcredist/. 6671Get it from the Microsoft site and put it into external/vcredist. You can try 6672to download it from https://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.]) 6673 fi 6674 WITH_VC_REDIST=YES 6675 AC_SUBST(WITH_VC_REDIST) 6676fi 6677 6678dnl =================================================================== 6679dnl Windows builds - use oowintool to copy CRT dlls and manifest 6680dnl =================================================================== 6681if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 6682 if $OOWINTOOL --msvc-copy-dlls ./external/msvcp ; then 6683 : 6684 else 6685 AC_MSG_ERROR([oowintool failed to copy CRT]) 6686 fi 6687fi 6688 6689dnl =================================================================== 6690dnl Windows builds need gdiplus.dll in external/gdiplus/ 6691dnl =================================================================== 6692if test "$_os" = "WINNT"; then 6693 AC_MSG_CHECKING([for gdiplus.dll]) 6694 if test -x ./external/gdiplus/gdiplus.dll; then 6695 AC_MSG_RESULT([found and executable]) 6696 else 6697 AC_MSG_ERROR([gdiplus.dll is missing in external/gdiplus/. 6698Get it from the Microsoft site and put it into external/gdiplus. 6699You may have to search Microsoft's website. Last time it was seen at: 6700<https://www.microsoft.com/downloads/details.aspx?familyid=6A63AB9C-DF12-4D41-933C-BE590FEAA05A&displaylang=en>.]) 6701 fi 6702fi 6703 6704dnl =================================================================== 6705dnl Windows builds need msvcr100.dll in external/msvcp100/ 6706dnl =================================================================== 6707if test "$_os" = "WINNT"; then 6708 AC_MSG_CHECKING([for msvcr100.dll]) 6709 if test -x ./external/msvcp100/msvcr100.dll; then 6710 AC_MSG_RESULT([found and executable]) 6711 else 6712 AC_MSG_ERROR([msvcr100.dll is missing in external/msvcp100/. 6713Get it from the Microsoft Visual C++ 2010 Redistributable Package (x86), 6714from the Microsoft site and put it into external/msvcp100. 6715You may have to search Microsoft's website. Last time it was seen at: 6716<https://www.microsoft.com/en-us/download/search.aspx?q=Microsoft+Visual+C%2b%2b+2010+Redistributable>.]) 6717 fi 6718fi 6719 6720dnl =================================================================== 6721dnl Test which vclplugs have to be built. 6722dnl =================================================================== 6723AC_MSG_CHECKING([which VCLplugs shall be built]) 6724ENABLE_GTK="" 6725if test "x$enable_gtk" = "xyes"; then 6726 ENABLE_GTK="TRUE" 6727 R="gtk" 6728fi 6729AC_SUBST(ENABLE_GTK) 6730 6731ENABLE_KDE="" 6732if test "x$enable_kde" = "xyes"; then 6733 ENABLE_KDE="TRUE" 6734 R="$R kde" 6735fi 6736AC_SUBST(ENABLE_KDE) 6737 6738ENABLE_KDE4="" 6739if test "x$enable_kde4" = "xyes"; then 6740 ENABLE_KDE4="TRUE" 6741 R="$R kde4" 6742fi 6743AC_SUBST(ENABLE_KDE4) 6744 6745if test -z "$R"; then 6746 AC_MSG_RESULT([none]) 6747else 6748 AC_MSG_RESULT([$R]) 6749fi 6750 6751dnl =================================================================== 6752dnl GCONF check 6753dnl =================================================================== 6754 6755ENABLE_GCONF="" 6756AC_MSG_CHECKING([whether to enable GConf support]) 6757if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$_os" != "OS2" -a "$enable_gconf" = "yes"; then 6758 ENABLE_GCONF="TRUE" 6759 AC_MSG_RESULT([yes]) 6760 PKG_CHECK_MODULES( GCONF, gconf-2.0 ) 6761else 6762 AC_MSG_RESULT([no]) 6763fi 6764AC_SUBST(ENABLE_GCONF) 6765 6766dnl =================================================================== 6767dnl Gnome VFS check 6768dnl =================================================================== 6769 6770ENABLE_GNOMEVFS="" 6771AC_MSG_CHECKING([whether to enable GNOME VFS support]) 6772if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gnome_vfs" = "yes"; then 6773 ENABLE_GNOMEVFS="TRUE" 6774 AC_MSG_RESULT([yes]) 6775 PKG_CHECK_MODULES( GNOMEVFS, gnome-vfs-2.0 >= 2.6.0 ) 6776 if test "$ENABLE_GCONF" != "TRUE"; then 6777 PKG_CHECK_MODULES( GCONF, gconf-2.0 ) 6778 fi 6779else 6780 AC_MSG_RESULT([no]) 6781fi 6782AC_SUBST(ENABLE_GNOMEVFS) 6783 6784dnl =================================================================== 6785dnl Check whether the gtk 2.0 libraries are available. 6786dnl =================================================================== 6787 6788GTK_CFLAGS="" 6789GTK_LIBS="" 6790ENABLE_SYSTRAY_GTK="" 6791ENABLE_DBUS="" 6792if test "$test_gtk" = "yes"; then 6793 6794 if test "$ENABLE_GTK" = "TRUE" ; then 6795 PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.4 gdk-pixbuf-xlib-2.0 >= 2.2 ,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages])) 6796 PKG_CHECK_MODULES(GTHREAD, gthread-2.0,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages])) 6797 BUILD_TYPE="$BUILD_TYPE GTK" 6798 6799 if test "x$enable_systray" = "xyes"; then 6800 PKG_CHECK_MODULES(GTK_2_10,gtk+-2.0 >= 2.10.0, 6801 [ENABLE_SYSTRAY_GTK="TRUE" 6802 BUILD_TYPE="$BUILD_TYPE SYSTRAY_GTK"], 6803 [ENABLE_SYSTRAY_GTK=""]) 6804 fi 6805 6806 AC_MSG_CHECKING([whether to enable DBUS support]) 6807 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_dbus" = "yes"; then 6808 ENABLE_DBUS="TRUE" 6809 AC_MSG_RESULT([yes]) 6810 PKG_CHECK_MODULES( DBUS, dbus-glib-1 >= 0.70 ) 6811 else 6812 AC_MSG_RESULT([no]) 6813 fi 6814 6815 AC_MSG_CHECKING([whether to enable GIO support]) 6816 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gio" = "yes"; then 6817 if test "$ENABLE_GNOMEVFS" = "TRUE" ; then 6818 AC_MSG_ERROR([please use --enable-gio only together with --disable-gnome-vfs.]) 6819 fi 6820 ENABLE_GIO="TRUE" 6821 AC_MSG_RESULT([yes]) 6822 PKG_CHECK_MODULES( GIO, gio-2.0 ) 6823 else 6824 AC_MSG_RESULT([no]) 6825 fi 6826 6827 fi 6828 6829fi 6830AC_SUBST(ENABLE_GIO) 6831AC_SUBST(ENABLE_DBUS) 6832AC_SUBST(ENABLE_SYSTRAY_GTK) 6833AC_SUBST(GTK_CFLAGS) 6834AC_SUBST(GTK_LIBS) 6835AC_SUBST(GTHREAD_CFLAGS) 6836AC_SUBST(GTHREAD_LIBS) 6837 6838dnl =================================================================== 6839dnl Check whether the GStreamer libraries are available. 6840dnl =================================================================== 6841 6842GSTREAMER_CFLAGS="" 6843GSTREAMER_LIBS="" 6844ENABLE_GSTREAMER="" 6845 6846if test "$test_gstreamer" = "yes"; then 6847 AC_MSG_CHECKING([whether to build the GStreamer media backend]) 6848 if test "x$enable_gstreamer" != "xno" ; then 6849 PKG_CHECK_MODULES( GSTREAMER, gtk+-2.0 >= 2.4 gthread-2.0 gstreamer-1.0 gstreamer-video-1.0,,AC_MSG_ERROR([requirements to build the GStreamer media backend not met. Do not use --enable-gstreamer or install the missing packages])) 6850 ENABLE_GSTREAMER="TRUE" 6851 AC_MSG_RESULT([yes]) 6852 else 6853 AC_MSG_RESULT([no]) 6854 fi 6855fi 6856AC_SUBST(ENABLE_GSTREAMER) 6857AC_SUBST(GSTREAMER_CFLAGS) 6858AC_SUBST(GSTREAMER_LIBS) 6859 6860dnl =================================================================== 6861dnl Check the ARM target 6862dnl =================================================================== 6863 6864if echo "$build_cpu" | $GREP -q arm && test "$build_cpu" != "arm64" && test "$build_cpu" != "aarch64"; then 6865 # default value 6866 ARM_TARGET=ARMV4T 6867 AC_MSG_CHECKING([which ARM processor optimization to use]) 6868 if test "$with_arm_target" -lt "6"; then 6869 ARM_TARGET=ARMV4T 6870 elif test "$with_arm_target" = "6"; then 6871 ARM_TARGET=ARMV6 6872 elif test "$with_arm_target" -gt "6"; then 6873 ARM_TARGET=ARMV7 6874 fi 6875 AC_MSG_RESULT([$ARM_TARGET]) 6876 AC_SUBST(ARM_TARGET) 6877fi 6878 6879dnl =================================================================== 6880dnl Check whether the Cairo libraries are available. 6881dnl =================================================================== 6882 6883ENABLE_CAIRO="" 6884BUILD_PIXMAN="" 6885SYSTEM_CAIRO="" 6886 6887if test "$test_cairo" = "yes"; then 6888 6889 AC_MSG_CHECKING([whether to use cairo]) 6890 if test "x$enable_cairo" != "xno" ; then 6891 ENABLE_CAIRO="TRUE" 6892 AC_MSG_RESULT([yes]) 6893 AC_MSG_CHECKING([which cairo to use]) 6894 if test -n "$with_system_cairo" -o -n "$with_system_libs" && \ 6895 test "$with_system_cairo" != "no"; then 6896 AC_MSG_RESULT([external]) 6897 SYSTEM_CAIRO=YES 6898 6899 PKG_CHECK_MODULES( CAIRO, cairo >= 1.0.2 ) 6900 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$ENABLE_FONTCONFIG" != "TRUE" ; then 6901 AC_MSG_ERROR([Cairo library requires fontconfig.]) 6902 fi 6903 if test "$with_system_xrender_headers" = "yes"; then 6904 AC_MSG_CHECKING([whether Xrender.h defines PictStandardA8]) 6905 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 6906#include <X11/extensions/Xrender.h> 6907 6908int main(int argc, char **argv) { 6909#ifdef PictStandardA8 6910 return 0; 6911#else 6912 return 1; 6913#endif 6914} 6915 ]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, X headers too old.])],[]) 6916 fi 6917 else 6918 BUILD_TYPE="$BUILD_TYPE CAIRO" 6919 dnl === compiler fails on pixman with 64bit architectures...=== 6920 if test "$build_cpu" != "x86_64"; then 6921 BUILD_PIXMAN=YES 6922 fi 6923 AC_MSG_RESULT([internal]) 6924 fi 6925 else 6926 AC_MSG_RESULT([no]) 6927 fi 6928fi 6929 6930AC_SUBST(ENABLE_CAIRO) 6931AC_SUBST(BUILD_PIXMAN) 6932AC_SUBST(SYSTEM_CAIRO) 6933AC_SUBST(CAIRO_CFLAGS) 6934AC_SUBST(CAIRO_LIBS) 6935 6936ENABLE_CAIRO_CANVAS="FALSE" 6937if test "$enable_cairo_canvas" = "yes" -a "$ENABLE_CAIRO" = "TRUE" ; then 6938 ENABLE_CAIRO_CANVAS="TRUE" 6939fi 6940AC_SUBST(ENABLE_CAIRO_CANVAS) 6941 6942dnl =================================================================== 6943dnl Check whether the OpenGL libraries are available 6944dnl =================================================================== 6945 6946AC_MSG_CHECKING([whether to build the OpenGL Transitions component]) 6947ENABLE_OPENGL= 6948 6949if test "x$enable_opengl" != "xno" ; then 6950 AC_MSG_RESULT([yes]) 6951 AC_CHECK_HEADER(GL/gl.h, [], 6952 [AC_MSG_ERROR([OpenGL headers not found])], []) 6953 AC_CHECK_LIB(GL, main, [], 6954 [AC_MSG_ERROR(libGL not installed or functional)], []) 6955 AC_CHECK_LIB(GLU, main, [], 6956 [AC_MSG_ERROR(libGLU not installed or functional)], []) 6957 ENABLE_OPENGL=TRUE 6958else 6959 AC_MSG_RESULT([no]) 6960fi 6961 6962AC_SUBST(ENABLE_OPENGL) 6963 6964 6965AC_MSG_CHECKING([whether to build the PDF Import extension]) 6966if test -n "$enable_pdfimport" -a "$enable_pdfimport" != "no"; then 6967 AC_MSG_RESULT([yes]) 6968 ENABLE_PDFIMPORT=YES 6969 6970 dnl =================================================================== 6971 dnl Check for system poppler 6972 dnl =================================================================== 6973 AC_MSG_CHECKING([whether to use system pdf backend]) 6974 if test -n "$with_system_poppler" -o -n "$with_system_libs" && \ 6975 test "$with_system_poppler" != "no"; then 6976 AC_MSG_RESULT([external]) 6977 SYSTEM_POPPLER=YES 6978 PKG_CHECK_MODULES( POPPLER, poppler >= 0.8.0 ) 6979 else 6980 AC_MSG_RESULT([no]) 6981 SYSTEM_POPPLER=NO 6982 ENABLE_PDFIMPORT=NO 6983 fi 6984else 6985 AC_MSG_RESULT([no]) 6986 ENABLE_PDFIMPORT=NO 6987fi 6988AC_SUBST(ENABLE_PDFIMPORT) 6989AC_SUBST(SYSTEM_POPPLER) 6990AC_SUBST(POPPLER_CFLAGS) 6991AC_SUBST(POPPLER_LIBS) 6992 6993AC_MSG_CHECKING([whether to build the Wiki Publisher extension]) 6994if test -n "$enable_wiki_publisher" -a "$enable_wiki_publisher" != "no" && test "$WITH_JAVA" != "no"; then 6995 AC_MSG_RESULT([yes]) 6996 AC_MSG_CHECKING([for swext module]) 6997 if test -d ./swext; then 6998 AC_MSG_RESULT([OK]) 6999 else 7000 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 7001 fi 7002 ENABLE_MEDIAWIKI=YES 7003 BUILD_TYPE="$BUILD_TYPE SWEXT" 7004else 7005 AC_MSG_RESULT([no]) 7006 ENABLE_MEDIAWIKI=NO 7007fi 7008AC_SUBST(ENABLE_MEDIAWIKI) 7009 7010AC_MSG_CHECKING([whether to build the Report Builder extension]) 7011if test -n "$enable_report_builder" -a "$enable_report_builder" != "no" && test "$WITH_JAVA" != "no"; then 7012 AC_MSG_RESULT([yes]) 7013 ENABLE_REPORTBUILDER=YES 7014 SYSTEM_JFREEREPORT=YES 7015 AC_MSG_CHECKING([for reportbuilder module]) 7016 if test -d ./reportbuilder; then 7017 AC_MSG_RESULT([OK]) 7018 else 7019 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 7020 fi 7021 AC_MSG_CHECKING([which jfreereport libs to use (for Report Builder extension)]) 7022 AC_MSG_RESULT([external]) 7023 if test -z $SAC_JAR; then 7024 SAC_JAR=/usr/share/java/sac.jar 7025 fi 7026 AC_CHECK_FILE($SAC_JAR, [], 7027 [AC_MSG_ERROR(sac.jar not found.)], []) 7028 7029 if test -z $LIBXML_JAR; then 7030 AC_CHECK_FILE(/usr/share/java/libxml-1.0.0.jar, 7031 [ LIBXML_JAR=/usr/share/java/libxml-1.0.0.jar ], 7032 [ 7033 AC_CHECK_FILE(/usr/share/java/libxml.jar, 7034 [ LIBXML_JAR=/usr/share/java/libxml.jar ], 7035 [AC_MSG_ERROR(libxml.jar replacement not found.)] 7036 ) 7037 ] 7038 ) 7039 else 7040 AC_CHECK_FILE($LIBXML_JAR, [], 7041 [AC_MSG_ERROR(libxml.jar not found.)], []) 7042 fi 7043 7044 if test -z $FLUTE_JAR; then 7045 AC_CHECK_FILE(/usr/share/java/flute-1.3.0.jar, 7046 [ FLUTE_JAR=/usr/share/java/flute-1.3.0.jar ], 7047 [ 7048 AC_CHECK_FILE(/usr/share/java/flute.jar, 7049 [ FLUTE_JAR=/usr/share/java/flute.jar ], 7050 [ AC_MSG_ERROR(flute-1.3.0.jar replacement not found.)] 7051 ) 7052 ] 7053 ) 7054 else 7055 AC_CHECK_FILE($FLUTE_JAR, [], 7056 [AC_MSG_ERROR(flute-1.3.0.jar not found.)], []) 7057 fi 7058 7059 if test -z $JFREEREPORT_JAR; then 7060 AC_CHECK_FILE(/usr/share/java/flow-engine-0.9.2.jar, 7061 [ JFREEREPORT_JAR=/usr/share/java/flow-engine-0.9.2.jar ], 7062 [ 7063 AC_CHECK_FILE(/usr/share/java/flow-engine.jar, 7064 [ JFREEREPORT_JAR=/usr/share/java/flow-engine.jar ], 7065 [AC_MSG_ERROR(jfreereport.jar replacement not found.)] 7066 ) 7067 ] 7068 ) 7069 else 7070 AC_CHECK_FILE($JFREEREPORT_JAR, [], 7071 [AC_MSG_ERROR(jfreereport.jar not found.)], []) 7072 fi 7073 7074 if test -z $LIBLAYOUT_JAR; then 7075 AC_CHECK_FILE(/usr/share/java/liblayout-0.2.9.jar, 7076 [ LIBLAYOUT_JAR=/usr/share/java/liblayout-0.2.9.jar ], 7077 [ 7078 AC_CHECK_FILE(/usr/share/java/liblayout.jar, 7079 [ LIBLAYOUT_JAR=/usr/share/java/liblayout.jar ], 7080 [AC_MSG_ERROR(liblayout.jar replacement not found.)] 7081 ) 7082 ] 7083 ) 7084 else 7085 AC_CHECK_FILE($LIBLAYOUT_JAR, [], 7086 [AC_MSG_ERROR(liblayout.jar not found.)], []) 7087 fi 7088 7089 if test -z $LIBLOADER_JAR; then 7090 AC_CHECK_FILE(/usr/share/java/libloader-1.0.0.jar, 7091 [ LIBLOADER_JAR=/usr/share/java/libloader-1.0.0.jar ], 7092 [ 7093 AC_CHECK_FILE(/usr/share/java/libloader.jar, 7094 [ LIBLOADER_JAR=/usr/share/java/libloader.jar ], 7095 [AC_MSG_ERROR(libloader.jar replacement not found.)] 7096 ) 7097 ] 7098 ) 7099 else 7100 AC_CHECK_FILE($LIBLOADER_JAR, [], 7101 [AC_MSG_ERROR(libloader.jar not found.)], []) 7102 fi 7103 7104 if test -z $LIBFORMULA_JAR; then 7105 AC_CHECK_FILE(/usr/share/java/libformula-0.2.0.jar, 7106 [ LIBFORMULA_JAR=/usr/share/java/libformula-0.2.0.jar ], 7107 [ 7108 AC_CHECK_FILE(/usr/share/java/libformula.jar, 7109 [ LIBFORMULA_JAR=/usr/share/java/libformula.jar ], 7110 [AC_MSG_ERROR(libformula.jar replacement not found.)] 7111 ) 7112 ] 7113 ) 7114 else 7115 AC_CHECK_FILE($LIBFORMULA_JAR, [], 7116 [AC_MSG_ERROR(libformula.jar not found.)], []) 7117 fi 7118 7119 if test -z $LIBREPOSITORY_JAR; then 7120 AC_CHECK_FILE(/usr/share/java/librepository-1.0.0.jar, 7121 [ LIBREPOSITORY_JAR=/usr/share/java/librepository-1.0.0.jar ], 7122 [ 7123 AC_CHECK_FILE(/usr/share/java/librepository.jar, 7124 [ LIBREPOSITORY_JAR=/usr/share/java/librepository.jar ], 7125 [AC_MSG_ERROR(librepository.jar replacement not found.)] 7126 ) 7127 ] 7128 ) 7129 else 7130 AC_CHECK_FILE($LIBREPOSITORY_JAR, [], 7131 [AC_MSG_ERROR(librepository.jar not found.)], []) 7132 fi 7133 7134 if test -z $LIBFONTS_JAR; then 7135 AC_CHECK_FILE(/usr/share/java/libfonts-1.0.0.jar, 7136 [ LIBFONTS_JAR=/usr/share/java/libfonts-1.0.0.jar ], 7137 [ 7138 AC_CHECK_FILE(/usr/share/java/libfonts.jar, 7139 [ LIBFONTS_JAR=/usr/share/java/libfonts.jar ], 7140 [AC_MSG_ERROR(libfonts.jar replacement not found.)] 7141 ) 7142 ] 7143 ) 7144 else 7145 AC_CHECK_FILE($LIBFONTS_JAR, [], 7146 [AC_MSG_ERROR(libfonts.jar not found.)], []) 7147 fi 7148 7149 if test -z $LIBSERIALIZER_JAR; then 7150 AC_CHECK_FILE(/usr/share/java/libserializer-1.0.0.jar, 7151 [ LIBSERIALIZER_JAR=/usr/share/java/libserializer-1.0.0.jar ], 7152 [ 7153 AC_CHECK_FILE(/usr/share/java/libserializer.jar, 7154 [ LIBSERIALIZER_JAR=/usr/share/java/libserializer.jar ], 7155 [AC_MSG_ERROR(libserializer.jar replacement not found.)] 7156 ) 7157 ] 7158 ) 7159 else 7160 AC_CHECK_FILE($LIBSERIALIZER_JAR, [], 7161 [AC_MSG_ERROR(libserializer.jar not found.)], []) 7162 fi 7163 7164 7165 if test -z $LIBBASE_JAR; then 7166 AC_CHECK_FILE(/usr/share/java/libbase-1.0.0.jar, 7167 [ LIBBASE_JAR=/usr/share/java/libbase-1.0.0.jar ], 7168 [ 7169 AC_CHECK_FILE(/usr/share/java/libbase.jar, 7170 [ LIBBASE_JAR=/usr/share/java/libbase.jar ], 7171 [AC_MSG_ERROR(libbase.jar replacement not found.)] 7172 ) 7173 ] 7174 ) 7175 else 7176 AC_CHECK_FILE($LIBBASE_JAR, [], 7177 [AC_MSG_ERROR(libbase.jar not found.)], []) 7178 fi 7179 BUILD_TYPE="$BUILD_TYPE REPORTBUILDER" 7180else 7181 AC_MSG_RESULT([no]) 7182 ENABLE_REPORTBUILDER=NO 7183fi 7184AC_SUBST(ENABLE_REPORTBUILDER) 7185AC_SUBST(SYSTEM_JFREEREPORT) 7186AC_SUBST(SAC_JAR) 7187AC_SUBST(LIBXML_JAR) 7188AC_SUBST(FLUTE_JAR) 7189AC_SUBST(JFREEREPORT_JAR) 7190AC_SUBST(LIBBASE_JAR) 7191AC_SUBST(LIBLAYOUT_JAR) 7192AC_SUBST(LIBLOADER_JAR) 7193AC_SUBST(LIBFORMULA_JAR) 7194AC_SUBST(LIBREPOSITORY_JAR) 7195AC_SUBST(LIBFONTS_JAR) 7196AC_SUBST(LIBSERIALIZER_JAR) 7197 7198# this has to be here because the Report Builder uses commons-logging, 7199# while the non-optional PostgreSQL connector uses commons-lang. 7200AC_MSG_CHECKING([which Apache commons-* libs to use]) 7201if test "$with_system_apache_commons" = "yes"; then 7202 SYSTEM_APACHE_COMMONS=YES 7203 AC_MSG_RESULT([external]) 7204 7205 if test -z $COMMONS_LANG_JAR; then 7206 AC_CHECK_FILE(/usr/share/java/commons-lang3-3.3.jar, 7207 [ COMMONS_LANG_JAR=/usr/share/java/commons-lang3-3.3.jar ], 7208 [ 7209 AC_CHECK_FILE(/usr/share/java/commons-lang.jar, 7210 [ COMMONS_LANG_JAR=/usr/share/java/commons-lang.jar ], 7211 [AC_MSG_ERROR(commons-lang.jar replacement not found.)] 7212 ) 7213 ] 7214 ) 7215 else 7216 AC_CHECK_FILE($COMMONS_LANG_JAR, [], 7217 [AC_MSG_ERROR(commons-lang.jar not found.)], []) 7218 fi 7219 AC_MSG_CHECKING([whether commons-lang is version 3.x]) 7220 export COMMONS_LANG_JAR 7221 if $PERL -e 'use Archive::Zip; 7222 my $file = "$ENV{'COMMONS_LANG_JAR'}"; 7223 my $zip = Archive::Zip->new( $file ); 7224 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 7225 if ( $mf =~ m/Specification-Version: 3.*/ ) { 7226 exit 0; 7227 } else { 7228 exit 1; 7229 }'; then 7230 AC_MSG_RESULT([yes]) 7231 else 7232 AC_MSG_ERROR([no, you need Apache Commons Lang 3.x]) 7233 fi 7234 7235 if test "$ENABLE_REPORTBUILDER" = "YES"; then 7236 if test -z $COMMONS_LOGGING_JAR; then 7237 AC_CHECK_FILE(/usr/share/java/commons-logging-1.1.3.jar, 7238 [ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging-1.1.3.jar ], 7239 [ 7240 AC_CHECK_FILE(/usr/share/java/commons-logging.jar, 7241 [ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging.jar ], 7242 [AC_MSG_ERROR(commons-logging.jar replacement not found.)] 7243 ) 7244 ] 7245 ) 7246 else 7247 AC_CHECK_FILE($COMMONS_LOGGING_JAR, [], 7248 [AC_MSG_ERROR(commons-logging.jar not found.)], []) 7249 fi 7250 fi 7251else 7252 AC_MSG_RESULT([internal]) 7253 SYSTEM_APACHE_COMMONS=NO 7254 BUILD_TYPE="$BUILD_TYPE APACHE_COMMONS" 7255fi 7256AC_SUBST(SYSTEM_APACHE_COMMONS) 7257AC_SUBST(COMMONS_LANG_JAR) 7258AC_SUBST(COMMONS_LOGGING_JAR) 7259 7260dnl =================================================================== 7261dnl Check whether the Qt and KDE libraries are available. 7262dnl =================================================================== 7263 7264KDE_CFLAGS="" 7265KDE_LIBS="" 7266MOC="moc" 7267if test "$test_kde" = "yes" -a "$ENABLE_KDE" = "TRUE" ; then 7268 dnl Search paths for Qt and KDE 7269 if test "$build_cpu" != "x86_64" ; then 7270 qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib/qt3/include /usr/lib/qt/include /usr/share/qt3/include $x_includes" 7271 qt_libdirs="$QTLIB /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries" 7272 else 7273 qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib64/qt3/include /usr/lib64/qt/include /usr/share/qt3/include /usr/lib/qt3/include /usr/lib/qt/include $x_includes" 7274 qt_libdirs="$QTLIB /usr/local/qt/lib64 /usr/lib64/qt /usr/lib64 /usr/X11R6/lib64/X11/qt /usr/X11R6/lib64/qt /usr/lib64/qt3/lib64 /usr/lib64/qt/lib64 /usr/share/qt3/lib64 /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries" 7275 fi 7276 if test -n "$QTDIR" ; then 7277 qt_incdirs="$QTDIR/include $qt_incdirs" 7278 if test "$build_cpu" != "x86_64" ; then 7279 qt_libdirs="$QTDIR/lib $qt_libdirs" 7280 else 7281 qt_libdirs="$QTDIR/lib64 $QTDIR/lib $qt_libdirs" 7282 fi 7283 fi 7284 if test "$build_cpu" != "x86_64" ; then 7285 kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes" 7286 kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib $x_libraries" 7287 else 7288 kde_incdirs="/usr/lib64/kde/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes" 7289 kde_libdirs="/usr/lib64/kde/lib64 /usr/local/kde/lib64 /usr/kde/lib64 /usr/lib64/kde /usr/lib64/kde3 /usr/X11R6/lib64 /usr/local/lib64 /opt/kde3/lib64 /opt/kde/lib64 /usr/X11R6/kde/lib64 /usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib64 $x_libraries" 7290 fi 7291 if test -n "$KDEDIR" ; then 7292 kde_incdirs="$KDEDIR/include $kde_incdirs" 7293 if test "$build_cpu" != "x86_64" ; then 7294 kde_libdirs="$KDEDIR/lib $kde_libdirs" 7295 else 7296 kde_libdirs="$KDEDIR/lib64 $KDEDIR/lib $kde_libdirs" 7297 fi 7298 fi 7299 7300 dnl What to test 7301 qt_test_include="qstyle.h" 7302 qt_test_library="libqt-mt.so" 7303 kde_test_include="ksharedptr.h" 7304 kde_test_library="libkdeui.so" 7305 7306 dnl Check for Qt headers 7307 AC_MSG_CHECKING([for Qt headers]) 7308 qt_incdir="no" 7309 for kde_check in $qt_incdirs ; do 7310 if test -r "$kde_check/$qt_test_include" ; then 7311 qt_incdir="$kde_check" 7312 break 7313 fi 7314 done 7315 AC_MSG_RESULT([$qt_incdir]) 7316 if test "x$qt_incdir" = "xno" ; then 7317 AC_MSG_ERROR([Qt headers not found. Please specify the root of 7318your Qt installation by exporting QTDIR before running "configure".]) 7319 fi 7320 7321 dnl Check for Qt libraries 7322 AC_MSG_CHECKING([for Qt libraries]) 7323 qt_libdir="no" 7324 for qt_check in $qt_libdirs ; do 7325 if test -r "$qt_check/$qt_test_library" ; then 7326 qt_libdir="$qt_check" 7327 break 7328 fi 7329 done 7330 AC_MSG_RESULT([$qt_libdir]) 7331 if test "x$qt_libdir" = "xno" ; then 7332 AC_MSG_ERROR([Qt libraries not found. Please specify the root of 7333your Qt installation by exporting QTDIR before running "configure".]) 7334 fi 7335 7336 dnl Check for Meta Object Compiler 7337 AC_PATH_PROG( MOC, moc, no, [$QTDIR/bin:$PATH] ) 7338 if test "$MOC" = "no" ; then 7339 AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify 7340the root of your Qt installation by exporting QTDIR before running "configure".]) 7341 fi 7342 7343 dnl Check for KDE headers 7344 AC_MSG_CHECKING([for KDE headers]) 7345 kde_incdir="no" 7346 for kde_check in $kde_incdirs ; do 7347 if test -r "$kde_check/$kde_test_include" ; then 7348 kde_incdir="$kde_check" 7349 break 7350 fi 7351 done 7352 AC_MSG_RESULT([$kde_incdir]) 7353 if test "x$kde_incdir" = "xno" ; then 7354 AC_MSG_ERROR([KDE headers not found. Please specify the root of 7355your KDE installation by exporting KDEDIR before running "configure".]) 7356 fi 7357 7358 dnl Check for KDE libraries 7359 AC_MSG_CHECKING([for KDE libraries]) 7360 kde_libdir="no" 7361 for kde_check in $kde_libdirs ; do 7362 if test -r "$kde_check/$kde_test_library" ; then 7363 kde_libdir="$kde_check" 7364 break 7365 fi 7366 done 7367 AC_MSG_RESULT([$kde_libdir]) 7368 if test "x$kde_libdir" = "xno" ; then 7369 AC_MSG_ERROR([KDE libraries not found. Please specify the root of 7370your KDE installation by exporting KDEDIR before running "configure".]) 7371 fi 7372 7373 dnl Set the variables 7374 KDE_CFLAGS="-I$qt_incdir -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT" 7375 KDE_LIBS="-L$kde_libdir -L$qt_libdir -lkdeui -lkdecore -lqt-mt" 7376fi 7377AC_SUBST(KDE_CFLAGS) 7378AC_SUBST(KDE_LIBS) 7379AC_SUBST(MOC) 7380 7381dnl =================================================================== 7382dnl KDE4 Integration 7383dnl =================================================================== 7384 7385KDE4_CFLAGS="" 7386KDE4_LIBS="" 7387MOC4="moc" 7388if test "$test_kde4" = "yes" -a "$ENABLE_KDE4" = "TRUE" ; then 7389 qt_incdirs="$QT4INC $QT4DIR /usr/include/qt4 /usr/include $x_includes" 7390 qt_libdirs="$QT4LIB /usr/lib $x_libraries" 7391 7392 kde_incdirs="/usr/include /usr/include/kde4 $x_includes" 7393 kde_libdirs="/usr/lib /usr/lib/kde4 /usr/lib/kde4/devel $x_libraries" 7394 7395 if test "$build_cpu" = "x86_64" ; then 7396 qt_libdirs="$qt_libdirs /usr/lib64/qt4 /usr/lib64/qt /usr/lib64" 7397 kde_libdirs="$kde_libdirs /usr/lib64 /usr/lib64/kde4 /usr/lib64/kde4/devel" 7398 fi 7399 7400 if test -n "$KDE4DIR" ; then 7401 kde_incdirs="$KDE4DIR/include $kde_incdirs" 7402 if test "$build_cpu" != "x86_64" ; then 7403 kde_libdirs="$KDE4DIR/lib $kde_libdirs" 7404 else 7405 kde_libdirs="$KDE4DIR/lib64 $KDE4DIR/lib $kde_libdirs" 7406 fi 7407 fi 7408 7409 qt_test_include="Qt/qobject.h" 7410 qt_test_library="libQtCore.so" 7411 kde_test_include="ksharedptr.h" 7412 kde_test_library="libkdeui.so" 7413 7414 AC_MSG_CHECKING([for Qt4 headers]) 7415 qt_header_dir="no" 7416 for inc_dir in $qt_incdirs ; do 7417 if test -r "$inc_dir/$qt_test_include" ; then 7418 qt_header_dir="$inc_dir" 7419 break 7420 fi 7421 done 7422 7423 AC_MSG_RESULT([$qt_header_dir]) 7424 if test "x$qt_header_dir" = "xno" ; then 7425 AC_MSG_ERROR([Qt4 headers not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".]) 7426 fi 7427 7428 AC_MSG_CHECKING([for Qt4 libraries]) 7429 qt_lib_dir="no" 7430 for lib_dir in $qt_libdirs ; do 7431 if test -r "$lib_dir/$qt_test_library" ; then 7432 qt_lib_dir="$lib_dir" 7433 break 7434 fi 7435 done 7436 7437 AC_MSG_RESULT([$qt_lib_dir]) 7438 7439 if test "x$qt_lib_dir" = "xno" ; then 7440 AC_MSG_ERROR([Qt4 libraries not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".]) 7441 fi 7442 7443 dnl Check for Meta Object Compiler 7444 AC_PATH_PROG( MOCQT4, moc-qt4, no, [$QT4DIR/bin:$PATH] ) 7445 MOC4="$MOCQT4" 7446 if test "$MOC4" = "no" ; then 7447 AC_PATH_PROG( MOC4, moc, no, [$PATH:$QT4DIR/bin] ) 7448 if test "$MOC4" = "no" ; then 7449 AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify the root of your Qt installation by exporting QT4DIR before running "configure".]) 7450 fi 7451 fi 7452 7453 dnl Check for KDE4 headers 7454 AC_MSG_CHECKING([for KDE4 headers]) 7455 kde_incdir="no" 7456 for kde_check in $kde_incdirs ; do 7457 if test -r "$kde_check/$kde_test_include" ; then 7458 kde_incdir="$kde_check" 7459 break 7460 fi 7461 done 7462 AC_MSG_RESULT([$kde_incdir]) 7463 if test "x$kde_incdir" = "xno" ; then 7464 AC_MSG_ERROR([KDE4 headers not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".]) 7465 fi 7466 7467 dnl Check for KDE4 libraries 7468 AC_MSG_CHECKING([for KDE4 libraries]) 7469 kde_libdir="no" 7470 for kde_check in $kde_libdirs ; do 7471 if test -r "$kde_check/$kde_test_library" ; then 7472 kde_libdir="$kde_check" 7473 break 7474 fi 7475 done 7476 7477 AC_MSG_RESULT([$kde_libdir]) 7478 if test "x$kde_libdir" = "xno" ; then 7479 AC_MSG_ERROR([KDE4 libraries not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".]) 7480 fi 7481 7482 KDE4_CFLAGS="`pkg-config --cflags QtCore` `pkg-config --cflags QtGui` -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT" 7483 KDE4_LIBS="-L$kde_libdir -L$qt_lib_dir -lkdeui -lkdecore -lQtCore -lQtGui" 7484fi 7485AC_SUBST(KDE4_CFLAGS) 7486AC_SUBST(KDE4_LIBS) 7487AC_SUBST(MOC4) 7488 7489dnl =================================================================== 7490dnl Test for the enabling the lockdown pieces 7491dnl =================================================================== 7492AC_MSG_CHECKING([whether to enable the lockdown pieces]) 7493ENABLE_LOCKDOWN="" 7494if test -n "$enable_lockdown" && test "$enable_lockdown" != "no"; then 7495 ENABLE_LOCKDOWN=YES 7496 AC_MSG_RESULT([yes]) 7497else 7498 AC_MSG_RESULT([no]) 7499fi 7500AC_SUBST(ENABLE_LOCKDOWN) 7501 7502dnl =================================================================== 7503dnl Test whether to include Evolution 2 support 7504dnl =================================================================== 7505AC_MSG_CHECKING([whether to enable evolution 2 support]) 7506if test "$enable_evolution2" = "yes" -o "$enable_evolution2" = "TRUE"; then 7507 AC_MSG_RESULT([yes]) 7508 PKG_CHECK_MODULES(GOBJECT, gobject-2.0) 7509 ENABLE_EVOAB2="TRUE" 7510else 7511 ENABLE_EVOAB2="" 7512 AC_MSG_RESULT([no]) 7513fi 7514AC_SUBST(ENABLE_EVOAB2) 7515AC_SUBST(GOBJECT_CFLAGS) 7516AC_SUBST(GOBJECT_LIBS) 7517 7518dnl =================================================================== 7519dnl Test whether to include MathMLDTD 7520dnl =================================================================== 7521AC_MSG_CHECKING([whether to include MathMLDTD]) 7522if test -n "$enable_mathmldtd"; then 7523 if test "$enable_mathmldtd" = "no"; then 7524 AC_MSG_RESULT([no]) 7525 SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD" 7526 else 7527 AC_MSG_RESULT([yes]) 7528 BUILD_TYPE="$BUILD_TYPE MATHMLDTD" 7529 fi 7530else 7531 AC_MSG_RESULT([no]) 7532 SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD" 7533fi 7534 7535dnl =================================================================== 7536dnl Test whether to include category-B fonts 7537dnl =================================================================== 7538WITH_CATB_FONTS= 7539AC_MSG_CHECKING([whether to include category B fonts]) 7540if test "x$enable_category_b_fonts" = "xyes" && test "x$with_fonts" != "xno"; then 7541 AC_MSG_RESULT([yes]) 7542 BUILD_TYPE="$BUILD_TYPE CATB_FONTS" 7543 WITH_CATB_FONTS=YES 7544 SCPDEFS="$SCPDEFS -DWITH_CATB_FONTS" 7545else 7546 AC_MSG_RESULT([no]) 7547 WITH_CATB_FONTS=NO 7548fi 7549 7550dnl =================================================================== 7551dnl Test whether to include category-A fonts 7552dnl =================================================================== 7553WITH_CATA_FONTS= 7554AC_MSG_CHECKING([whether to include category A fonts]) 7555if test "x$with_fonts" != "xno" ; then 7556 AC_MSG_RESULT([yes]) 7557 WITH_CATA_FONTS=YES 7558 SCPDEFS="$SCPDEFS -DWITH_CATA_FONTS" 7559else 7560 AC_MSG_RESULT([no]) 7561 WITH_CATA_FONTS=NO 7562 WITH_CATB_FONTS=NO 7563fi 7564 7565WITH_FONTS=NO 7566AC_MSG_CHECKING([whether any fonts are included]) 7567if test "x$WITH_CATA_FONTS" = "xYES" -o "x$WITH_CATB_FONTS" = "xYES"; then 7568 BUILD_TYPE="$BUILD_TYPE MORE_FONTS" 7569 WITH_FONTS=YES 7570 AC_MSG_RESULT([yes]) 7571else 7572 AC_MSG_RESULT([no]) 7573fi 7574 7575AC_SUBST(WITH_CATA_FONTS) 7576AC_SUBST(WITH_CATB_FONTS) 7577AC_SUBST(WITH_FONTS) 7578 7579dnl =================================================================== 7580dnl Test whether to include ppds 7581dnl =================================================================== 7582AC_MSG_CHECKING([whether to include PPDs]) 7583if test "$with_ppds" != "no"; then 7584 AC_MSG_RESULT([yes]) 7585else 7586 AC_MSG_RESULT([no]) 7587 WITHOUT_PPDS=YES 7588 SCPDEFS="$SCPDEFS -DWITHOUT_PPDS" 7589fi 7590AC_SUBST(WITHOUT_PPDS) 7591 7592dnl =================================================================== 7593dnl Test whether to include afms 7594dnl =================================================================== 7595AC_MSG_CHECKING([whether to include AFMs]) 7596if test "$with_afms" != "no"; then 7597 AC_MSG_RESULT([yes]) 7598 BUILD_TYPE="$BUILD_TYPE AFMS" 7599else 7600 AC_MSG_RESULT([no]) 7601 WITHOUT_AFMS=YES 7602 SCPDEFS="$SCPDEFS -DWITHOUT_AFMS" 7603fi 7604AC_SUBST(WITHOUT_AFMS) 7605 7606AC_SUBST(SCPDEFS) 7607 7608AC_MSG_CHECKING([whether and how to use Xinerama]) 7609if test "$_os" = "Darwin"; then 7610 USE_XINERAMA=YES 7611 XINERAMA_LINK=dynamic 7612 AC_MSG_RESULT([yes]) 7613elif test "$_os" = "Linux" -o "$_os" = "FreeBSD"; then 7614 if test -e "$XLIB/libXinerama.so" -a -e "$XLIB/libXinerama.a"; then 7615 # we have both versions, let the user decide but use the dynamic one 7616 # per default 7617 USE_XINERAMA=YES 7618 if test -z "$with_static_xinerama" -o -n "$with_system_libs"; then 7619 XINERAMA_LINK=dynamic 7620 else 7621 XINERAMA_LINK=static 7622 fi 7623 elif test -e "$XLIB/libXinerama.so" -a ! -e "$XLIB/libXinerama.a"; then 7624 # we have only the dynamic version 7625 USE_XINERAMA=YES 7626 XINERAMA_LINK=dynamic 7627 elif test -e "$XLIB/libXinerama.a"; then 7628 # static version 7629 if echo $build_cpu | $GREP -E 'i[[3456]]86' 2>/dev/null >/dev/null; then 7630 USE_XINERAMA=YES 7631 XINERAMA_LINK=static 7632 else 7633 USE_XINERAMA=NO 7634 XINERAMA_LINK=none 7635 fi 7636 else 7637 # no Xinerama 7638 USE_XINERAMA=NO 7639 XINERAMA_LINK=none 7640 fi 7641 if test "$USE_XINERAMA" = "YES"; then 7642 AC_MSG_RESULT([yes, with $XINERAMA_LINK linking]) 7643 AC_CHECK_HEADER(X11/extensions/Xinerama.h, [], 7644 [AC_MSG_ERROR(Xinerama header not found.)], []) 7645 XINERAMA_EXTRA_LIBS="-L$XLIB -lXext" 7646 if test "$_os" = "FreeBSD"; then 7647 XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -lXt" 7648 fi 7649 if test "$_os" = "Linux"; then 7650 XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -ldl" 7651 fi 7652 AC_CHECK_LIB(Xinerama, XineramaIsActive, [], 7653 [AC_MSG_ERROR(Xinerama not functional?)], [$XINERAMA_EXTRA_LIBS]) 7654 else 7655 AC_MSG_RESULT([no, libXinerama not found or wrong architecture.]) 7656 fi 7657else 7658 AC_MSG_RESULT([no]) 7659fi 7660AC_SUBST(USE_XINERAMA) 7661AC_SUBST(XINERAMA_LINK) 7662 7663dnl =================================================================== 7664dnl always rely on the system version of gdk-pixbuf 7665dnl =================================================================== 7666 7667SYSTEM_GDKPIXBUF=YES 7668AC_SUBST(SYSTEM_GDKPIXBUF) 7669 7670dnl =================================================================== 7671dnl always rely on the system version of glib 7672dnl =================================================================== 7673 7674SYSTEM_GLIB=YES 7675AC_SUBST(SYSTEM_GLIB) 7676 7677dnl =================================================================== 7678dnl always rely on the system version of gettext 7679dnl =================================================================== 7680 7681SYSTEM_GETTEXT=YES 7682AC_SUBST(SYSTEM_GETTEXT) 7683 7684if test "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then 7685 LIBINTL_PREFIX= 7686 for dir in $CPPFLAGS; do 7687 if dir=`expr -- $dir : '-I\(.*\)'`; then 7688 if test -f "$dir/libintl.h" ; then 7689 LIBINTL_PREFIX=`dirname $dir` 7690 fi 7691 fi 7692 done 7693 if test -z "$LIBINTL_PREFIX"; then 7694 for dir in /usr/local /opt/homebrew /opt/local /usr; do 7695 test -f "$dir/include/libintl.h" && LIBINTL_PREFIX=$dir && break 7696 done 7697 fi 7698 AC_SUBST(LIBINTL_PREFIX) 7699fi 7700 7701dnl =================================================================== 7702dnl always rely on the system version of pango 7703dnl =================================================================== 7704 7705SYSTEM_PANGO=YES 7706AC_SUBST(SYSTEM_PANGO) 7707 7708dnl =================================================================== 7709dnl Test whether to build libpng or rely on the system version 7710dnl =================================================================== 7711AC_MSG_CHECKING([whether to build own version of libpng]) 7712 7713case "$_os" in 7714 WINNT*) # Windows 7715 SYSTEM_LIBPNG=NO 7716 AC_MSG_RESULT([yes]) 7717 ;; 7718 Darwin*) 7719 SYSTEM_LIBPNG=NO 7720 AC_MSG_RESULT([yes]) 7721 ;; 7722 *) 7723 SYSTEM_LIBPNG=YES 7724 AC_MSG_RESULT([no]) 7725 ;; 7726esac 7727AC_SUBST(SYSTEM_LIBPNG) 7728 7729dnl =================================================================== 7730dnl Test whether to build libjpeg or rely on the system version 7731dnl =================================================================== 7732dnl FIXME: this is currently because we have jpeg-6b for our filters 7733dnl and jpeg-8 as dependency for librsvg 7734dnl this should be unified into using only one version for both 7735 7736AC_MSG_CHECKING([whether to build own version of libjpeg]) 7737 7738if test "$SYSTEM_JPEG" = "YES"; then 7739SYSTEM_LIBJPEG=YES 7740else 7741case "$_os" in 7742 WINNT*) # Windows 7743 SYSTEM_LIBJPEG=NO 7744 ;; 7745 Darwin*) 7746 SYSTEM_LIBJPEG=NO 7747 ;; 7748 *) 7749 SYSTEM_LIBJPEG=YES 7750 ;; 7751esac 7752fi 7753 7754if test "$SYSTEM_LIBJPEG" = "YES"; then 7755 AC_MSG_RESULT([no]) 7756else 7757 AC_MSG_RESULT([yes]) 7758fi 7759AC_SUBST(SYSTEM_LIBJPEG) 7760 7761dnl =================================================================== 7762dnl Test whether rat scan was requested and whether apache-rat is available 7763dnl =================================================================== 7764RAT_JAR= 7765AC_MSG_CHECKING([whether to trigger rat scan]) 7766if test -z "$with_rat_scan" -o "$with_rat_scan" = "no"; then 7767 AC_MSG_RESULT([no]) 7768else 7769 if test "$WITH_JAVA" = "no"; then 7770 AC_MSG_ERROR([no, java disabled, enable with --with-java]) 7771 elif test "$enable_saxon" = "no"; then 7772 AC_MSG_ERROR([no, saxon disabled, enable with --enable-category-b]) 7773 elif test "$with_rat_scan" = "yes"; then 7774 AC_MSG_RESULT([yes, use pre-built library]) 7775 RAT_JAR_HOME="BUILD" 7776 BUILD_TYPE="$BUILD_TYPE RAT" 7777 else 7778 AC_MSG_RESULT([yes, use pre-installed library]) 7779 AC_MSG_CHECKING([whether apache-rat is available]) 7780 if test -d "$with_rat_scan"; then 7781 RAT_JAR_HOME=$with_rat_scan 7782 else 7783 AC_MSG_ERROR([$with_rat_scan is not a directory]) 7784 fi 7785 fi 7786fi 7787AC_SUBST(RAT_JAR_HOME) 7788 7789 7790dnl =================================================================== 7791dnl Test for the presence of Ant and that it works 7792dnl =================================================================== 7793 7794if test "$SOLAR_JAVA" != ""; then 7795ANT_HOME=; export ANT_HOME 7796WITH_ANT_HOME=; export WITH_ANT_HOME 7797if test -z "$with_ant_home"; then 7798 if test "$_os" = "OS2"; then 7799 AC_PATH_PROGS(ANT, ant.cmd) 7800 else 7801 AC_PATH_PROGS(ANT, [apache-ant ant ant.sh ant.bat ant.cmd]) 7802 fi 7803else 7804 if test "$_os" = "WINNT"; then 7805 with_ant_home=`cygpath -u "$with_ant_home"` 7806 fi 7807 if test "$_os" = "OS2"; then 7808 AC_PATH_PROGS(ANT, ant.cmd,,$with_ant_home/bin:$PATH) 7809 else 7810 AC_PATH_PROGS(ANT, [apache-ant ant ant.sh ant.bat ant.cmd],,$with_ant_home/bin:$PATH) 7811 fi 7812 WITH_ANT_HOME=$with_ant_home 7813 ANT_HOME=$with_ant_home 7814fi 7815 7816if test -z "$ANT"; then 7817 AC_MSG_ERROR([Ant not found - Make sure it's in the path or use --with-ant-home]) 7818else 7819 # resolve relative or absolute symlink 7820 while test -h "$ANT"; do 7821 a_cwd=`pwd` 7822 a_basename=`basename "$ANT"` 7823 a_script=`ls -l "$ANT" | sed "s/.*${a_basename} -> //g"` 7824 cd "`dirname "$ANT"`" 7825 cd "`dirname "$a_script"`" 7826 ANT="`pwd`"/"`basename "$a_script"`" 7827 cd "$a_cwd" 7828 done 7829 7830 if test "$_os" = "OS2"; then 7831 ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"` 7832 export ANT_HOME 7833 fi 7834 7835 AC_MSG_CHECKING([if $ANT works]) 7836cat > conftest.java << EOF 7837 public class conftest { 7838 int testmethod(int a, int b) { 7839 return a + b; 7840 } 7841 } 7842EOF 7843 7844cat > conftest.xml << EOF 7845 <project name="conftest" default="conftest"> 7846 <target name="conftest"> 7847 <javac srcdir="." includes="conftest.java"> 7848 </javac> 7849 </target> 7850 </project> 7851EOF 7852 oldJAVA_HOME=$JAVA_HOME 7853 if test "$JAVACISGCJ" = "yes"; then 7854 JAVA_HOME=; export JAVA_HOME 7855 ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2" 7856 else 7857 ant_cmd="$ANT -buildfile conftest.xml 1>&2" 7858 fi 7859 AC_TRY_EVAL(ant_cmd) 7860 if test $? = 0 && test -f ./conftest.class ; then 7861 AC_MSG_RESULT([Ant works]) 7862 if test -z "$WITH_ANT_HOME"; then 7863 ANT_HOME=`$ANT -diagnostics | $EGREP "ant.home :" | $SED -e "s#ant.home : ##g"` 7864 if test -z "$ANT_HOME"; then 7865 ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"` 7866 fi 7867 else 7868 ANT_HOME="$WITH_ANT_HOME" 7869 fi 7870 else 7871 echo "configure: Ant test failed" >&5 7872 cat conftest.java >&5 7873 cat conftest.xml >&5 7874 AC_MSG_WARN([Ant does not work - Some Java projects will not build!]) 7875 ANT_HOME="" 7876 echo "Ant does not work - Some Java projects will not build!" >>warn 7877 fi 7878 JAVA_HOME=$oldJAVA_HOME 7879 rm -f conftest* core core.* *.core 7880fi 7881if test -z "$ANT_HOME"; then 7882 ANT_HOME="NO_ANT_HOME" 7883fi 7884AC_SUBST(ANT_HOME) 7885 7886dnl Checking for ant.jar 7887if test "$ANT_HOME" != "NO_ANT_HOME"; then 7888 AC_MSG_CHECKING([Ant lib directory]) 7889 if test -f $ANT_HOME/lib/ant.jar; then 7890 ANT_LIB="$ANT_HOME/lib" 7891 else 7892 if test -f $ANT_HOME/ant.jar; then 7893 ANT_LIB="$ANT_HOME" 7894 else 7895 if test -f /usr/share/java/ant.jar; then 7896 ANT_LIB=/usr/share/java 7897 else 7898 if test -f /usr/share/ant-core/lib/ant.jar; then 7899 ANT_LIB=/usr/share/ant-core/lib 7900 else 7901 if test -f $ANT_HOME/lib/ant/ant.jar; then 7902 ANT_LIB="$ANT_HOME/lib/ant" 7903 else 7904 if test -f /usr/share/lib/ant/ant.jar; then 7905 ANT_LIB=/usr/share/lib/ant 7906 else 7907 AC_MSG_ERROR([Ant libraries not found!]) 7908 fi 7909 fi 7910 fi 7911 fi 7912 fi 7913 fi 7914 AC_MSG_RESULT([Ant lib directory found.]) 7915fi 7916AC_SUBST(ANT_LIB) 7917fi 7918 7919ant_minver=1.9.1 7920# update for more extensions... 7921if test "$ENABLE_MEDIAWIKI" = "YES"; then 7922 ant_minver=1.9.1 7923fi 7924ant_minminor1=`echo $ant_minver | cut -d"." -f2` 7925 7926AC_MSG_CHECKING([whether ant is >= $ant_minver]) 7927ant_version=`$ANT -version | $AWK '{ print $4; }'` 7928ant_version_major=`echo $ant_version | cut -d. -f1` 7929ant_version_minor=`echo $ant_version | cut -d. -f2` 7930echo "configure: ant_version $ant_version " >&5 7931echo "configure: ant_version_major $ant_version_major " >&5 7932echo "configure: ant_version_minor $ant_version_minor " >&5 7933if test "$ant_version_major" -ge "2"; then 7934 AC_MSG_RESULT([yes, $ant_version]) 7935elif test "$ant_version_major" = "1" && test "$ant_version_minor" -ge "$ant_minminor1"; then 7936 AC_MSG_RESULT([yes, $ant_version]) 7937else 7938 AC_MSG_ERROR([no, you need at least ant >= $ant_minver]) 7939fi 7940 7941if test "$ENABLE_MEDIAWIKI" = "YES"; then 7942AC_MSG_CHECKING([whether ant supports mapper type="regexp"]) 7943rm -rf confdir 7944mkdir confdir 7945cat > conftest.java << EOF 7946 public class conftest { 7947 int testmethod(int a, int b) { 7948 return a + b; 7949 } 7950 } 7951EOF 7952 7953cat > conftest.xml << EOF 7954 <project name="conftest" default="conftest"> 7955 <target name="conftest" depends="copytest"> 7956 <javac srcdir="." includes="conftest.java"> 7957 </javac> 7958 </target> 7959 <target name="copytest"> 7960 <copy todir="confdir"> 7961 <fileset dir="confdir" includes="**/*.abc" casesensitive="yes"/> 7962 <filterset/> 7963 <mapper type="regexp" from="^(.*[/\\])foo([/\\].*)" to="\1baa\2"/> 7964 </copy> 7965 </target> 7966 </project> 7967EOF 7968 if test "$JAVACISGCJ" = "yes"; then 7969 JAVA_HOME=; export JAVA_HOME 7970 ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2" 7971 else 7972 ant_cmd="$ANT -buildfile conftest.xml 1>&2" 7973 fi 7974 AC_TRY_EVAL(ant_cmd) 7975 if test $? = 0 && test -f ./conftest.class ; then 7976 AC_MSG_RESULT([yes]) 7977 rm -rf confdir 7978 else 7979 echo "configure: Ant test failed" >&5 7980 cat conftest.java >&5 7981 cat conftest.xml >&5 7982 rm -rf confdir 7983 AC_MSG_ERROR([no. Did you install ant-apache-regexp?]) 7984 fi 7985fi 7986rm -f conftest* core core.* *.core 7987 7988OOO_JUNIT_JAR= 7989JUNIT_NEEDS_HAMCREST= 7990if test "$SOLAR_JAVA" != "" && test "$with_junit" != "no"; then 7991 AC_MSG_CHECKING([for JUnit]) 7992 if test "$with_junit" = "yes"; then 7993 if test -e /usr/share/java/junit4.jar; then 7994 OOO_JUNIT_JAR=/usr/share/java/junit4.jar 7995 else 7996 if test -e /usr/local/share/java/classes/junit4.jar; then 7997 OOO_JUNIT_JAR=/usr/local/share/java/classes/junit4.jar 7998 else 7999 if test -e /usr/share/lib/java/junit.jar; then 8000 OOO_JUNIT_JAR=/usr/share/lib/java/junit.jar 8001 else 8002 if test -e /usr/share/local/lib/java/junit.jar; then 8003 OOO_JUNIT_JAR=/usr/share/local/lib/java/junit.jar 8004 else 8005 if test -e /usr/share/java/junit.jar; then 8006 OOO_JUNIT_JAR=/usr/share/java/junit.jar 8007 else 8008 if test -e /usr/local/share/java/classes/junit.jar; then 8009 OOO_JUNIT_JAR=/usr/local/share/java/classes/junit.jar 8010 fi 8011 fi 8012 fi 8013 fi 8014 fi 8015 fi 8016 else 8017 OOO_JUNIT_JAR=$with_junit 8018 fi 8019 if test -e "$OOO_JUNIT_JAR"; then 8020 AC_MSG_RESULT([yes]) 8021 else 8022 AC_MSG_ERROR([cannot find JUnit 4 jar; please install one in the default 8023locations (/usr/share/java or /usr/local/share/java/classes), specify its pathname via 8024--with-junit=..., or disable it via --without-junit.]) 8025 fi 8026 if test "$_os" = "WINNT"; then 8027 OOO_JUNIT_JAR=`cygpath -m "$OOO_JUNIT_JAR"` 8028 fi 8029 AC_MSG_CHECKING([whether JUnit is version 4.x]) 8030 export OOO_JUNIT_JAR 8031 if $PERL -e 'use Archive::Zip; 8032 my $file = "$ENV{'OOO_JUNIT_JAR'}"; 8033 my $zip = Archive::Zip->new( $file ); 8034 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 8035 if ( $mf =~ m/Implementation-Version: 4.12*/ ) { 8036 exit 0; 8037 } elsif ( $mf =~ m/Implementation-Version: 4.11*/ ) { 8038 exit 0; 8039 } elsif ( $mf =~ m/Bundle-Version: 4.12*/ ) { 8040 exit 0; 8041 } elsif ( $mf =~ m/Bundle-Version: 4.11*/ ) { 8042 exit 0; 8043 } else { 8044 exit 1; 8045 }'; then 8046 AC_MSG_RESULT([yes, but Hamcrest Core is mandatory with this JUnit version (>= 4.11)]) 8047 JUNIT_NEEDS_HAMCREST=yes 8048 elif $PERL -e 'use Archive::Zip; 8049 my $file = "$ENV{'OOO_JUNIT_JAR'}"; 8050 my $zip = Archive::Zip->new( $file ); 8051 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 8052 if ( $mf =~ m/Implementation-Version: 4.*/ ) { 8053 exit 0; 8054 } elsif ( $mf =~ m/Bundle-Version: 4.*/ ) { 8055 } else { 8056 exit 1; 8057 }'; then 8058 AC_MSG_RESULT([yes]) 8059 else 8060 AC_MSG_ERROR([no, your JUnit version is too old, you need JUnit 4.x]) 8061 fi 8062fi 8063AC_SUBST(OOO_JUNIT_JAR) 8064 8065HAMCREST_CORE_JAR= 8066if test "$SOLAR_JAVA" != "" && test "$with_hamcrest_core" != "no"; then 8067 AC_MSG_CHECKING([for hamcrest-core]) 8068 if test "$with_hamcrest_core" = "yes"; then 8069 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest-core-1.3.jar; then 8070 HAMCREST_CORE_JAR=/usr/share/java/hamcrest-core-1.3.jar 8071 fi 8072 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest-core-1.3.jar; then 8073 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest-core-1.3.jar 8074 fi 8075 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/lib/java/hamcrest-core.jar; then 8076 HAMCREST_CORE_JAR=/usr/share/lib/java/hamcrest-core.jar 8077 fi 8078 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/lib/java/hamcrest-core.jar; then 8079 HAMCREST_CORE_JAR=/usr/local/share/lib/java/hamcrest-core.jar 8080 fi 8081 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest-core.jar; then 8082 HAMCREST_CORE_JAR=/usr/share/java/hamcrest-core.jar 8083 fi 8084 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest-core.jar; then 8085 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest-core.jar 8086 fi 8087 # Sometimes the "-core-" part is missing... 8088 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest1.3.jar; then 8089 HAMCREST_CORE_JAR=/usr/share/java/hamcrest1.3.jar 8090 fi 8091 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest1.3.jar; then 8092 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest1.3.jar 8093 fi 8094 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/lib/java/hamcrest.jar; then 8095 HAMCREST_CORE_JAR=/usr/share/lib/java/hamcrest.jar 8096 fi 8097 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/lib/java/hamcrest.jar; then 8098 HAMCREST_CORE_JAR=/usr/local/share/lib/java/hamcrest.jar 8099 fi 8100 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest.jar; then 8101 HAMCREST_CORE_JAR=/usr/share/java/hamcrest.jar 8102 fi 8103 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest.jar; then 8104 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest.jar 8105 fi 8106 else 8107 HAMCREST_CORE_JAR=$with_hamcrest_core 8108 fi 8109 if test -e "$HAMCREST_CORE_JAR"; then 8110 AC_MSG_RESULT([yes]) 8111 if test "$_os" = "WINNT"; then 8112 HAMCREST_CORE_JAR=`cygpath -m "$HAMCREST_CORE_JAR"` 8113 fi 8114 else 8115 if test "$JUNIT_NEEDS_HAMCREST" = "yes"; then 8116 AC_MSG_ERROR([cannot find hamcrest-core jar; please install one in the 8117default locations (/usr/share/java or /usr/local/share/java/classes), specify its 8118pathname via --with-hamcrest-core=..., or disable 8119it via --without-hamcrest-core or --without-junit]) 8120 else 8121 AC_MSG_RESULT([no, skipping]) 8122 fi 8123 fi 8124else 8125 if test "$JUNIT_NEEDS_HAMCREST" = "yes"; then 8126 AC_MSG_ERROR([JUnit needs Hamcrest but Hamcrest disabled.]) 8127 fi 8128fi 8129AC_SUBST(HAMCREST_CORE_JAR) 8130 8131AC_MSG_CHECKING([which languages to be built]) 8132WITH_LANG="$with_lang" 8133if test -z "$WITH_LANG"; then 8134 AC_MSG_RESULT([en-US]) 8135else 8136 AC_MSG_RESULT([$WITH_LANG]) 8137 ADDITIONAL_REPOSITORIES="$ADDITIONAL_REPOSITORIES ../extras" 8138 BUILD_TYPE="$BUILD_TYPE L10N" 8139fi 8140AC_SUBST(WITH_LANG) 8141 8142AC_MSG_CHECKING([which languages have poor help localizations]) 8143WITH_POOR_HELP_LOCALIZATIONS="$with_poor_help_localizations" 8144if test -z "$WITH_POOR_HELP_LOCALIZATIONS"; then 8145 AC_MSG_RESULT([none]) 8146else 8147 AC_MSG_RESULT([$WITH_POOR_HELP_LOCALIZATIONS]) 8148fi 8149AC_SUBST(WITH_POOR_HELP_LOCALIZATIONS) 8150 8151AC_MSG_CHECKING([which dictionaries to include]) 8152if test -z "$with_dict"; then 8153 WITH_DICT=,ALL, 8154 AC_MSG_RESULT([ALL]) 8155else 8156 WITH_DICT=","$with_dict"," 8157 AC_MSG_RESULT([$with_dict]) 8158fi 8159AC_SUBST(WITH_DICT) 8160 8161AC_MSG_CHECKING([for additional 'intro' bitmaps]) 8162INTRO_BITMAPS= 8163if test -z "$with_intro_bitmaps" -o "$with_intro_bitmaps" = "no" ; then 8164 INTRO_BITMAPS= 8165 AC_MSG_RESULT([none]) 8166else 8167 for bitmap in `echo $with_intro_bitmaps | tr ',' ' '` ; do 8168 case "$bitmap" in 8169 *.png) ;; 8170 *) bitmap= ; AC_MSG_WARN([Intro bitmaps should be .png files!]) ;; 8171 esac 8172 if test -n "$bitmap" ; then 8173 INTRO_BITMAPS="$INTRO_BITMAPS $bitmap" 8174 fi 8175 done 8176 AC_MSG_RESULT([$INTRO_BITMAPS]) 8177fi 8178AC_SUBST(INTRO_BITMAPS) 8179 8180AC_MSG_CHECKING([for additional 'about' bitmaps]) 8181ABOUT_BITMAPS= 8182if test -z "$with_about_bitmaps" -o "$with_about_bitmaps" = "no" ; then 8183 ABOUT_BITMAPS= 8184 AC_MSG_RESULT([none]) 8185else 8186 for bitmap in `echo $with_about_bitmaps | tr ',' ' '` ; do 8187 case "$bitmap" in 8188 *.png) ;; 8189 *) bitmap= ; AC_MSG_WARN([About bitmaps should be .png files!]) ;; 8190 esac 8191 if test -n "$bitmap" ; then 8192 ABOUT_BITMAPS="$ABOUT_BITMAPS $bitmap" 8193 fi 8194 done 8195 AC_MSG_RESULT([$ABOUT_BITMAPS]) 8196fi 8197AC_SUBST(ABOUT_BITMAPS) 8198 8199OOO_VENDOR= 8200AC_MSG_CHECKING([for vendor]) 8201if test -z "$with_vendor" -o "$with_vendor" = "no" ; then 8202 AC_MSG_RESULT([not set]) 8203else 8204 OOO_VENDOR="$with_vendor" 8205 AC_MSG_RESULT([$OOO_VENDOR]) 8206fi 8207AC_SUBST(OOO_VENDOR) 8208 8209UNIXWRAPPERNAME= 8210AC_MSG_CHECKING([for UNIX wrapper name]) 8211if test -z "$with_unix_wrapper" -o "$with_unix_wrapper" = "no" -o "$with_unix_wrapper" = "yes" ; then 8212 AC_MSG_RESULT([not set]) 8213else 8214 UNIXWRAPPERNAME="$with_unix_wrapper" 8215 AC_MSG_RESULT([$UNIXWRAPPERNAME]) 8216fi 8217AC_SUBST(UNIXWRAPPERNAME) 8218 8219AC_MSG_CHECKING([whether to statically link to Gtk]) 8220if test -n "$enable_static_gtk" && test "$enable_static_gtk" != "no"; then 8221 ENABLE_STATIC_GTK="TRUE" 8222 AC_MSG_RESULT([yes]) 8223else 8224 ENABLE_STATIC_GTK="FALSE" 8225 AC_MSG_RESULT([no]) 8226fi 8227AC_SUBST(ENABLE_STATIC_GTK) 8228 8229AC_MSG_CHECKING([whether to use layout dialogs]) 8230if test -n "$enable_layout" && test "$enable_layout" != "no"; then 8231 ENABLE_LAYOUT="TRUE" 8232 AC_MSG_RESULT([yes]) 8233else 8234 ENABLE_LAYOUT="FALSE" 8235 AC_MSG_RESULT([no]) 8236fi 8237AC_SUBST(ENABLE_LAYOUT) 8238 8239# =================================================================== 8240# De- or increase default verbosity of build process 8241# =================================================================== 8242AC_MSG_CHECKING([build verbosity]) 8243if test -n "$enable_verbose"; then 8244 if test "$enable_verbose" = "yes"; then 8245 VERBOSE="TRUE" 8246 AC_MSG_RESULT([high]) 8247 fi 8248 if test "$enable_verbose" = "no"; then 8249 VERBOSE="FALSE" 8250 AC_MSG_RESULT([low]) 8251 fi 8252else 8253 AC_MSG_RESULT([not set]) 8254fi 8255AC_SUBST(VERBOSE) 8256 8257dnl =================================================================== 8258dnl Hook up AOOs nodep environmental variable to automake's equivalent 8259dnl --enable-dependency-tracking configure option 8260dnl =================================================================== 8261AC_MSG_CHECKING([whether to enable dependency tracking]) 8262if test "$enable_dependency_tracking" = "no"; then 8263 nodep=TRUE 8264 AC_MSG_RESULT([no]) 8265else 8266 AC_MSG_RESULT([yes]) 8267fi 8268AC_SUBST(nodep) 8269 8270dnl =================================================================== 8271dnl Setting up the environment. 8272dnl =================================================================== 8273echo "********************************************************************" 8274echo "* *" 8275echo "* Setting up the build environment variables. *" 8276echo "* *" 8277echo "********************************************************************" 8278 8279if test -z "$COMPATH"; then 8280 AC_MSG_ERROR([No compiler found.]) 8281fi 8282AC_SUBST(COMPATH) 8283AC_SUBST(CC_PATH) 8284 8285AC_MSG_CHECKING([solver path]) 8286if test -z "$with_local_solver"; then 8287 LOCAL_SOLVER="DEFAULT" 8288 AC_MSG_RESULT([default]) 8289else 8290 LOCAL_SOLVER=$with_local_solver 8291 AC_MSG_RESULT([$with_local_solver]) 8292fi 8293AC_SUBST(LOCAL_SOLVER) 8294 8295AC_SUBST(BUILD_TYPE) 8296AC_SUBST(ADDITIONAL_REPOSITORIES) 8297 8298# make sure config.guess is +x; we execute config.guess, so it has to be so; 8299chmod +x ./config.guess 8300 8301# Create files from their *.in templates. 8302AC_CONFIG_FILES([set_soenv Makefile]) 8303 8304AC_MSG_NOTICE([writing config.status]) 8305AC_OUTPUT 8306 8307dnl Executing the set_soenv script to setup the environment variables. 8308chmod a+x set_soenv 8309if test -z "$enable_check_only"; then 8310 './set_soenv' 8311else 8312 echo 8313 echo Test Complete 8314 echo No environment file will be generated 8315 echo 8316 num_warnings=`wc -l warn` 8317 _num=`echo $num_warnings | $AWK '{ print $1 }'` 8318 if test $_num -gt 0; then 8319 echo The following warning\(s\) were generated by configure 8320 echo ---------------------------------------------------- 8321 echo 8322 cat warn 8323 echo 8324 else 8325 echo There were no warnings 8326 fi 8327 echo 8328fi 8329 8330
