1dnl * ************************************************************* 2dnl * 3dnl * Licensed to the Apache Software Foundation (ASF) under one 4dnl * or more contributor license agreements. See the NOTICE file 5dnl * distributed with this work for additional information 6dnl * regarding copyright ownership. The ASF licenses this file 7dnl * to you under the Apache License, Version 2.0 (the 8dnl * "License"); you may not use this file except in compliance 9dnl * with the License. You may obtain a copy of the License at 10dnl * 11dnl * http://www.apache.org/licenses/LICENSE-2.0 12dnl * 13dnl * Unless required by applicable law or agreed to in writing, 14dnl * software distributed under the License is distributed on an 15dnl * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16dnl * KIND, either express or implied. See the License for the 17dnl * specific language governing permissions and limitations 18dnl * under the License. 19dnl * 20dnl * ************************************************************* 21AC_REVISION( $Revision$ ) 22dnl macOS needs autoconf 2.72 (2.71 mis-detects the toolchain there); 23dnl other platforms remain on the older 2.71 floor. 24m4_define([AOO_REQUIRED_AUTOCONF], 25 [m4_if(m4_esyscmd_s([uname]), [Darwin], [2.72], [2.71])]) 26AC_PREREQ(AOO_REQUIRED_AUTOCONF) 27AC_INIT 28echo "$@" >config.parms 29AC_ARG_WITH(dmake-path, 30[ --with-dmake-path=<PATH TO EXECUTABLE> Specify the location of dmake ], 31[ DMAKE_PATH="$withval" 32]) 33AC_ARG_WITH(dmake-url, 34[ --with-dmake-url=<URL> Specify the location of downloadable dmake source code. For example: 35 https://github.com/jimjag/dmake/archive/v4.13.2/dmake-4.13.2.tar.gz 36 Note that dmake is under GPL license.], 37[ DMAKE_URL="$withval" 38]) 39AC_ARG_WITH(packager-list, 40[ --with-packager-list=<PATH TO PACK LIST> Specify a file to drive the packaging process. 41 The file must follow the format explained in 42 instsetoo_native/util/pack.lst 43],,) 44AC_ARG_WITH(gnu-patch, 45[ --with-gnu-patch Specify location of GNU patch on Solaris or FreeBSD 46],,) 47AC_ARG_WITH(gnu-cp, 48[ --with-gnu-cp Specify location of GNU cp on Solaris 49],,) 50AC_ARG_WITH(gperf, 51[ --with-gperf Specify location of gperf on Solaris or FreeBSD 52],,) 53AC_ARG_ENABLE(graphite, 54[ --enable-graphite Enables the compilation of Graphite smart font rendering 55],,) 56AC_ARG_WITH(system-graphite, 57[ --with-system-graphite use graphite library already installed on system 58],,) 59AC_ARG_WITH(system-apache-commons, 60[ --with-system-apache-commons use apache-commons jar files already installed on system 61],,) 62AC_ARG_ENABLE(online-update, 63[ --disable-online-update Disables the Online Update feature. 64],,enable_online_update=yes) 65AC_ARG_ENABLE(unit-tests, 66[ --disable-unit-tests Disables default unit tests (eg. unit tests using Google test, ...). 67],,enable_unit_tests=yes) 68AC_ARG_ENABLE(ldap, 69[ --disable-ldap Disables the use of LDAP backend via OpenLDAP 70],,) 71AC_ARG_ENABLE(fetch-external, 72[ --disable-fetch-external Disables fetching external tarballs from web sources. 73],,) 74AC_ARG_WITH(external-tar, 75[ --with-external-tar=<TARFILE PATH> Specify path to tarfiles manually ], 76[ TARFILE_LOCATION="$withval" 77]) 78AC_ARG_WITH(openldap, 79[ --with-openldap Enables the use of the OpenLDAP 80],,) 81AC_ARG_ENABLE(lockdown, 82[ --enable-lockdown Enables the gconf integration work in AOO 83],,) 84AC_ARG_ENABLE(vba, 85[ --disable-vba disables the vba compatibility feature 86],,) 87AC_ARG_WITH(vba-package-format, 88[ --with-vba-package-format specify package format for vba compatibility api. 89 Specifying "builtin" means the api component and 90 associated type library are part of the installation set. 91 Specifying "extn" creates an uno extension that is 92 part of the installation set ( located in the program 93 directory ) that MUST be optionly registered using 94 either the unopkg executeable or the extension manager 95 gui. 96 97 Note: "builtin" is the default, "extn" can cause 98 problems. 99 Usage: --with-vba-package-format="builtin" or 100 --with-vba-package-format="extn" 101],,) 102AC_ARG_ENABLE(pch, 103[ --enable-pch EXPERIMENTAL: Enables precompiled header support for C++. 104],,) 105AC_ARG_WITH(fonts, 106[ --without-fonts AOO includes some third-party fonts to provide a reliable 107 basis for help content, templates, samples, etc. 108 When these fonts are already known to be available on the 109 system then you should use this option. 110],,) 111AC_ARG_WITH(ppds, 112[ --without-ppds Removes Postscript Printer definition files from 113 Apache OpenOffice installation set, for people building 114 for specific distributions where PPDs are known to be 115 already available (every recent distro with CUPS 116 backend) 117],,) 118AC_ARG_WITH(afms, 119[ --without-afms Removes bitmap font files from Apache Openoffice 120 installation set, for people building for specific 121 distributions where AFM files or TrueType Fonts 122 are known to be available. 123],,) 124AC_ARG_ENABLE(epm, 125[ --disable-epm AOO includes self-packaging code, that requires EPM. 126],,enable_epm="yes") 127AC_ARG_WITH(epm, 128[ --with-epm Decides which EPM to use. Default is to use 129 the one installed on the system if one is there. When 130 either this is not there or you say =internal 131 EPM will be built. 132],,) 133AC_ARG_WITH(epm-url, 134[ --with-epm-url=<URL> Specify the location of downloadable epm source code. For example: 135 https://github.com/jimjag/epm/archive/v5.1.0/epm-5.1.0.tar.gz 136 Version 5.0.0 or later is required. 137],[ EPM_URL="$withval" 138]) 139AC_ARG_WITH(package-format, 140[ --with-package-format specify package format(s) for AOO installsets. 141 Default is "normal" one of the OS/Distribution. 142 143 Usage: --with-package-format="foo bar" 144],,) 145AC_ARG_ENABLE(odk, 146[ --disable-odk AOO includes an ODK, office development kit 147 which some packagers may want to build without 148],,enable_odk="yes") 149AC_ARG_ENABLE(mathmldtd, 150[ --disable-mathmldtd disable mathmldtd 151 (useful for distributions that want to avoid packaging 152 it) 153],,enable_mathmldtd="yes") 154AC_ARG_ENABLE(evolution2, 155[ --enable-evolution2 Allows the built-in evolution 2 addressbook 156 connectivity build to be enabled. 157],,) 158AC_ARG_WITH(system-stdlibs, 159[ --with-system-stdlibs use libstdc++/libgcc_s already on system 160],,) 161AC_ARG_ENABLE(cups, 162[ --disable-cups disable CUPS support (for printing on UNIX) 163],,enable_cups=yes) 164AC_ARG_ENABLE(fontconfig, 165[ --disable-fontconfig disable support for the fontconfig library 166],,enable_fontconfig=yes) 167AC_ARG_ENABLE(directx, 168[ --disable-directx Remove DirectX implementation for the new XCanvas 169 interface. The DirectX support requires more stuff 170 installed on Windows to compile. 171 (DirectX SDK, GDI+ libs) 172],,enable_directx=yes) 173AC_ARG_ENABLE(activex, 174[ --disable-activex Disable the use of ActiveX for Windows build. 175 This switch is mandatory when using VC++ 2005/2008 Express. 176 Alternatively you can use the Windows Driver Kit (WDK) and 177 configure with the following switches: 178 --with-atl-include-dir=$WDK_HOME\inc\atl71 179 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 180 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 181 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 182],,) 183 184AC_ARG_ENABLE(atl, 185[ --disable-atl Disable the use of ATL for Windows build. 186 This switch is mandatory when using VC++ 2005/2008 Express. 187 Alternatively you can use the Windows Driver Kit (WDK) and 188 configure with the following switches: 189 --with-atl-include-dir=$WDK_HOME\inc\atl71 190 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 191 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 192 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 193],,) 194 195AC_ARG_WITH(atl-include-dir, 196[ --with-atl-include-dir Path to ATL include directory for Windows build. 197 This switch is mandatory when using VC++ 2008 Express 198 and configuring with ATL/ActiveX enabled. 199 You can use the Windows Driver Kit (WDK) and 200 configure with the following switch: 201 --with-atl-include-dir=$WDK_HOME\inc\atl71 202],,) 203 204AC_ARG_WITH(atl-lib-dir, 205[ --with-atl-lib-dir Path to ATL libraries directory for Windows build. 206 This switch is mandatory when using VC++ 2008 Express 207 and configuring with ATL/ActiveX enabled. 208 You can use the Windows Driver Kit (WDK) and 209 configure with the following switch: 210 --with-atl-lib-dir=$WDK_HOME\lib\ATL\i386 211],,) 212 213AC_ARG_WITH(mfc-include-dir, 214[ --with-mfc-include-dir Path to MFC include directory for Windows build. 215 This switch is mandatory when using VC++ 2008 Express 216 and configuring with ATL/ActiveX enabled. 217 You can use the Windows Driver Kit (WDK) and 218 configure with the following switch: 219 --with-mfc-include-dir=$WDK_HOME\inc\mfc42 220],,) 221 222AC_ARG_WITH(mfc-lib-dir, 223[ --with-mfc-lib-dir Path to MFC libraries directory for Windows build. 224 This switch is mandatory when using VC++ 2008 Express 225 and configuring with ATL/ActiveX enabled. 226 You can use the Windows Driver Kit (WDK) and 227 configure with the following switch: 228 --with-mfc-lib-dir=$WDK_HOME\lib\Mfc\i386 229],,) 230 231 232AC_ARG_ENABLE(symbols, 233[ --enable-symbols Include debugging symbols in output. 234 WARNING - a complete build needs 8 Gb of space and 235 takes much longer. (enables -g compiler flag) 236 237 --enable-symbols=SMALL sets the gcc -g1 setting 238 which is smaller. 239 240 Enabling symbols disables the stripping of the solver 241 (--disable-strip-solver). 242],,) 243AC_ARG_ENABLE(sanitizer, 244[ --enable-sanitizer Enables -fsanitize=address compiler flag. 245 Works with GCC and Clang. 246 247 It is suggested to add --enable-symbols so that the 248 address sanitizer can give more detailed information. 249],,) 250AC_ARG_ENABLE(strip-solver, 251[ --disable-strip-solver Disable the stripping of the solver. 252 By default the solver is stripped unless a build with 253 debugging symbols (--enable-symbols) is requested. 254 255 This switch allows to override this setting. 256],,) 257AC_ARG_ENABLE(werror, 258[ --enable-werror Turn warnings to errors. (Has no effect in modules 259 where the treating of warnings as errors is disabled 260 explicitly) 261],,) 262AC_ARG_ENABLE(debug, 263[ --enable-debug Include debugging symbols from --enable-symbols 264 plus extra debugging code. Extra large build! 265 (enables -g compiler flag and dmake debug=true) 266],,) 267AC_ARG_ENABLE(dbgutil, 268[ --enable-dbgutil Include additional debugging utilities, such as 269 assertions, object counting, etc. Larger build. 270 Independent from --enable-debug 271],,) 272AC_ARG_ENABLE(crashdump, 273[ --enable-crashdump Enable the crashdump feature code. 274],,) 275AC_ARG_ENABLE(cl-standard, 276[ --enable-cl-standard For Microsoft C/C++ compiler users, use non-optimizing 277 standard compiler. ( This just disables optimization 278 options and therefore removes a lot of warnings when 279 using the cheaper standard compiler. ) 280],,) 281AC_ARG_ENABLE(win64, 282[ --enable-win64 Enable building 64 bit OpenOffice on 64 bit Windows, (as 283 opposed to 32 bit OpenOffice that is usually built there). 284 This is a temporary option during the transition, 285 as 64 bit OpenOffice doesn't fully build on Windows yet. 286],,enable_win64=no) 287AC_ARG_ENABLE(win-x64-shellext, 288[ --enable-win-x64-shellext Enable the build/usage of Windows 64bit shell extensions. 289 These extensions are used for the system integration on 290 Windows 64bit systems. For example supporting the search 291 in ODF files with the standard Windows search feature. 292],,) 293AC_ARG_ENABLE(gtk, 294[ --disable-gtk Determines whether to use Gtk+ vclplug on platforms 295 where Gtk+ is available. 296],,enable_gtk=yes) 297AC_ARG_ENABLE(gstreamer, 298[ --enable-gstreamer Determines whether to use the GStreamer media 299 backend on platforms where GStreamer is available. 300],,enable_gstreamer=no) 301AC_ARG_ENABLE(systray, 302[ --disable-systray Determines whether to build the systray quickstarter. 303],,enable_systray=yes) 304AC_ARG_ENABLE(cairo, 305[ --enable-cairo Determines whether to use Cairo library on 306 platforms where Cairo is available. 307],,enable_cairo=no) 308AC_ARG_WITH(system-cairo, 309[ --with-system-cairo Use Cairo libraries already on system 310],,) 311AC_ARG_ENABLE(cairo-canvas, 312[ --disable-cairo-canvas Determines whether to build the Cairo canvas on 313 platforms where Cairo is available. 314],,enable_cairo_canvas=yes) 315AC_ARG_ENABLE(opengl, 316[ --enable-opengl Determines whether to build the OpenGL 3D slide 317 transitions component 318],,enable_opengl=no) 319AC_ARG_ENABLE(dbus, 320[ --enable-dbus Determines whether to enable presentation mode 321 screensaver control under GNOME via DBUS 322],,enable_dbus=no) 323AC_ARG_ENABLE(gconf, 324[ --disable-gconf Determines whether to use the GConf support 325],,enable_gconf=yes) 326AC_ARG_ENABLE(gnome-vfs, 327[ --disable-gnome-vfs Determines whether to use the Gnome Virtual Filing 328 System on platforms where that VFS is available 329],,enable_gnome_vfs=no) 330AC_ARG_ENABLE(gio, 331[ --enable-gio Determines whether to use the GIO support 332],,enable_gio=yes) 333AC_ARG_ENABLE(static-gtk, 334[ --enable-static-gtk Modules that are linked against gtk libraries use 335 the static libraries instead of the dynamic ones. 336 (enables -Bstatic linker flag for gtk libraries) 337],,) 338AC_ARG_ENABLE(layout, 339[ --enable-layout Enable the compilation and use of layout dialogs 340],,) 341AC_ARG_ENABLE(nss-module, 342[ --disable-nss-module Whether to use the NSS module that is used for xml-security 343],,enable_nss_module=yes) 344AC_ARG_ENABLE(kde, 345[ --enable-kde Determines whether to use Qt/KDE vclplug on platforms 346 where Qt and KDE are available. 347],,) 348AC_ARG_ENABLE(kde4, 349[ --enable-kde4 Determines whether to use Qt4/KDE4 vclplug on platforms 350 where Qt4 and KDE4 are available. May be used with --enable-kde 351 if you want to support both KDE3 and KDE4. 352],,) 353AC_ARG_ENABLE(rpath, 354[ --disable-rpath Disable the use of relative paths in shared libraries 355],,) 356AC_ARG_ENABLE(pam, 357[ --disable-pam Disable pam support. 358],,) 359AC_ARG_ENABLE(pam-link, 360[ --enable-pam-link link with libpam instead of dynamically open it 361],,) 362AC_ARG_ENABLE(crypt-link, 363[ --disable-crypt-link disable linking with libcrypt instead of dynamically 364 open it (needed for ancient GNU/Linux distributions 365 without crypt()/libcrypt) 366],,enable_crypt_link=yes) 367AC_ARG_ENABLE(xrender-link, 368[ --enable-xrender-link link with libXrender instead of dynamically open it 369],,) 370AC_ARG_ENABLE(randr, 371[ --disable-randr disable RandR support in the vcl project 372],,enable_randr=yes) 373AC_ARG_ENABLE(randr-link, 374[ --disable-randr-link disable linking with libXrandr, instead dynamically 375 open it at runtime 376],,enable_randr_link=yes) 377AC_ARG_WITH(bundled-extension-blobs, 378[ --with-bundled-extension-blobs Whitespace separated list of files in the tarball directory 379 that are to be bundled as-is for installation as extensions 380 at the first program start. Make sure to only bundle extensions 381 which can be installed without requiring a license dialog 382 and comply with their distribution requirements by updating the 383 files LICENSE_aggregated and NOTICE_aggregated accordingly 384],,) 385#AC_ARG_WITH(bundled-prereg-extensions, 386#[ --with-bundled-prereg-extensions Whitespace separated list of files in the tarball directory that 387# are to be bundled as pre-registered extensions. Make sure to only bundle 388# extensions which can be installed without requiring a license dialog 389#],,) 390AC_ARG_ENABLE(bundled-dictionaries, 391[ --enable-bundled-dictionaries Download dictionaries (spelling, hyphenation, thesaurus) 392 according to main/extensions.lst and bundle them. Make sure to 393 comply with their distribution requirements and update the 394 files LICENSE_aggregated and NOTICE_aggregated accordingly 395],,enable_bundled_dictionaries=no) 396 397# Remove the following switches when not in release mode. 398AC_ARG_WITH(system-dicts, 399[ --with-system-dicts Use dictionaries from system paths- Specify 400 them via --with-{dict,hyph,thes}-path=/path 401 if you want to override the default ones 402],,) 403AC_ARG_WITH(external-dict-dir, 404[ --with-external-dict-dir Specify external dictionary dir 405],,) 406AC_ARG_WITH(external-hyph-dir, 407[ --with-external-hyph-dir Specify external hyphenation pattern dir 408],,) 409AC_ARG_WITH(external-thes-dir, 410[ --with-external-thes-dir Specify external thesaurus dir 411],,) 412# End of remove. 413 414 415AC_ARG_WITH(system-libs, 416[ --with-system-libs Use libs already on system -- enables all 417 --with-system-* flags except 418 odbc/sane/xrender-header(s) 419],,) 420AC_ARG_WITH(system-headers, 421[ --with-system-headers Use headers already on system -- enables all 422 --with-system-* flags for external packages 423 whose headers are the only entities used i.e. 424 boost/vigra/odbc/sane/xrender-header(s) 425],,) 426AC_ARG_WITH(system-jars, 427[ --without-system-jars When building with --with-system-libs, also the 428 needed jars are expected on the system. Use this to 429 disable that. 430 (except for the db case where --with-system-db 431 *has to* imply using the db.jar from there, too) 432],,) 433AC_ARG_WITH(system-zlib, 434[ --with-system-zlib Use zlib already on system 435],,) 436AC_ARG_WITH(system-nss, 437[ --with-system-nss Use NSS already on system 438],,) 439AC_ARG_WITH(system-openssl, 440[ --with-system-openssl Use OpenSSL already on system 441],,) 442AC_ARG_WITH(system-jpeg, 443[ --with-system-jpeg Use jpeg already on system 444],,) 445AC_ARG_WITH(system-expat, 446[ --with-system-expat Use expat already on system 447],,) 448AC_ARG_WITH(system-libxml, 449[ --with-system-libxml Use libxml already on system 450],,) 451AC_ARG_WITH(static-system-libs, 452[ --with-static-system-libs=LIST 453 Comma-separated list of system libraries to link 454 statically, each NAME or NAME:DIR, e.g. 455 "libxml,libxslt,curl,openssl,libiconv:/usr/local". 456 Supported: libxml, libxslt, curl, openssl, libiconv. 457 NAME alone uses the prefix the matching 458 --with-system-NAME resolved (openssl: the prefix 459 and libdir its openssl.pc reports); libiconv has no such 460 option, so it always needs the :DIR form. Without 461 this the archive is used only when the prefix 462 happens to have no dylib, so a dylib appearing 463 there silently switches the build to dynamic 464 linking. 465],,) 466AC_ARG_WITH(system-python, 467[ --with-system-python Use python already on system 468],,) 469AC_ARG_WITH(system-icu, 470[ --with-system-icu Use icu already on system 471],,) 472AC_ARG_WITH(system-poppler, 473[ --with-system-poppler Use poppler already on system 474],,) 475AC_ARG_WITH(system-lucene, 476[ --with-system-lucene Use lucene already on system 477],,) 478AC_ARG_WITH(lucene-core-jar, 479[ --with-lucene-core-jar=JARFILE Specify path to jarfile manually ], 480[ LUCENE_CORE_JAR="$withval" 481]) 482AC_ARG_WITH(lucene-analyzers-jar, 483[ --with-lucene-analyzers-jar=JARFILE Specify path to jarfile manually ], 484[ LUCENE_ANALYZERS_JAR="$withval" 485]) 486AC_ARG_ENABLE(mysql-connector, 487[ --enable-mysql-connector enables the build of the MySQL Connector/OOo extension. 488 This requires access to the MySQL Connector/C (aka libmysql) to be given, too, with 489 either the --with-system-mysql or --with-libmysql-path option. 490],,) 491AC_ARG_WITH(system-mysql, 492[ --with-system-mysql Use MySQL libraries already on system, for building the MySQL Connector/OOo extension. 493 Requires MYSQLCONFIG to point to the mysql_config executable. 494],,) 495AC_ARG_WITH(libmysql-path, 496[ --with-libmysql-path Use Connector/C (libmysql) installation for building the MySQL Connector/OOo extension. 497 498 Usage: --with-libmysql-path=<absolute path to your Connector/C installation> 499],,) 500AC_ARG_WITH(system-mysql-cppconn, 501[ --with-system-mysql-cppconn Use MySQL C++ Connector libraries already on system 502],,) 503AC_ARG_WITH(system-hsqldb, 504[ --with-system-hsqldb Use hsqldb already on system 505],,) 506AC_ARG_WITH(hsqldb-jar, 507[ --with-hsqldb-jar=JARFILE Specify path to jarfile manually ], 508[ HSQLDB_JAR="$withval" 509]) 510AC_ARG_WITH(system-beanshell, 511[ --with-system-beanshell Use beanshell already on system (default) 512],,) 513AC_ARG_ENABLE(beanshell, 514[ --enable-beanshell Enable the use of beanshell. 515],,) 516AC_ARG_WITH(beanshell-jar, 517[ --with-beanshell-jar=JARFILE Specify path to jarfile manually ], 518[ BSH_JAR="$withval" 519]) 520AC_ARG_ENABLE(pdfimport, 521[ --enable-pdfimport enables the build of the PDF Import extension 522],,) 523AC_ARG_ENABLE(wiki-publisher, 524[ --enable-wiki-publisher enables the build of the Wiki Publisher extension 525],,) 526AC_ARG_WITH(commons-lang-jar, 527[ --with-commons-lang-jar=JARFILE Specify path to jarfile manually ], 528[ COMMONS_LANG_JAR="$withval" 529]) 530AC_ARG_WITH(commons-logging-jar, 531[ --with-commons-logging-jar=JARFILE Specify path to jarfile manually ], 532[ COMMONS_LOGGING_JAR="$withval" 533]) 534AC_ARG_ENABLE(report-builder, 535[ --enable-report-builder enables the build of the Report Builder extension 536],,) 537AC_ARG_WITH(sac-jar, 538[ --with-sac-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 539[ SAC_JAR="$withval" 540]) 541AC_ARG_WITH(libxml-jar, 542[ --with-libxml-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 543[ LIBXML_JAR="$withval" 544]) 545AC_ARG_WITH(flute-jar, 546[ --with-flute-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 547[ FLUTE_JAR="$withval" 548]) 549AC_ARG_WITH(jfreereport-jar, 550[ --with-jfreereport-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 551[ JFREEREPORT_JAR="$withval" 552]) 553AC_ARG_WITH(liblayout-jar, 554[ --with-liblayout-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 555[ LIBLAYOUT_JAR="$withval" 556]) 557AC_ARG_WITH(libloader-jar, 558[ --with-libloader-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 559[ LIBLOADER_JAR="$withval" 560]) 561AC_ARG_WITH(libformula-jar, 562[ --with-libformula-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 563[ LIBFORMULA_JAR="$withval" 564]) 565AC_ARG_WITH(librepository-jar, 566[ --with-librepository-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 567[ LIBREPOSITORY_JAR="$withval" 568]) 569AC_ARG_WITH(libfonts-jar, 570[ --with-libfonts-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 571[ LIBFONTS_JAR="$withval" 572]) 573AC_ARG_WITH(libserializer-jar, 574[ --with-libserializer-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 575[ LIBSERIALIZER_JAR="$withval" 576]) 577AC_ARG_WITH(libbase-jar, 578[ --with-libbase-jar=JARFILE Specify path to jarfile manually (for Report Builder extension) ], 579[ LIBBASE_JAR="$withval" 580]) 581AC_ARG_WITH(system-saxon, 582[ --with-system-saxon Use saxon already on system (default) 583],,) 584AC_ARG_ENABLE(saxon, 585[ --disable-saxon Disable use of saxon 586],,) 587AC_ARG_WITH(saxon-jar, 588[ --with-saxon-jar=JARFILE Specify path to jarfile manually. This implies --with-system-saxon ], 589[ SAXON_JAR="$withval" 590]) 591AC_ARG_WITH(system-libxslt, 592[ --with-system-libxslt Use libxslt already on system 593],,) 594AC_ARG_WITH(system-odbc, 595[ --with-system-odbc-headers Use the odbc headers already on system 596],,) 597AC_ARG_WITH(system-sane, 598[ --with-system-sane-header Use sane.h already on system 599],,) 600AC_ARG_WITH(system-xrender, 601[ --with-system-xrender-headers Use XRender headers already on system 602],,) 603AC_ARG_WITH(system-curl, 604[ --with-system-curl Use curl already on system 605],,) 606AC_ARG_WITH(system-boost, 607[ --with-system-boost Use boost already on system 608],,) 609AC_ARG_WITH(system-mdds, 610[ --with-system-mdds Use mdds already on system 611],,) 612AC_ARG_WITH(system-vigra, 613[ --with-system-vigra Use vigra already on system 614],,) 615AC_ARG_ENABLE(hunspell, 616[ --enable-hunspell Determines whether to enable the Hunspell library. 617 If enabled, the library will be built unless you 618 specify --with-system-hunspell to use the library 619 already present on your system. 620 If disabled, the Spell Checking component will also 621 be disabled. 622 (Default: hunspell disabled) 623],,enable_hunspell=no) 624AC_ARG_WITH(system-hunspell, 625[ --with-system-hunspell Use libhunspell already on system 626],,) 627AC_ARG_WITH(system-mythes, 628[ --with-system-mythes Use mythes already on system 629],,) 630AC_ARG_ENABLE(hyphen, 631[ --enable-hyphen Determines whether to enable the Hyphen library. 632 If enabled, the library will be built unless you 633 specify --with-system-hyphen to use the library 634 already present on your system. 635 If disabled, the Hyphenator component will also 636 be disabled. 637 (Default: hyphen disabled) 638],,enable_hyphen=no) 639AC_ARG_WITH(system-hyphen, 640[ --with-system-hyphen Use libhypeh already on system 641],,) 642AC_ARG_WITH(system-libtextcat, 643[ --with-system-libtextcat Use libtextcat already on system 644],,) 645AC_ARG_WITH(external-libtextcat-data, 646[ --with-system-libtextcat-data Use libtextcat data already on system 647],,) 648AC_ARG_WITH(system-redland, 649[ --with-system-redland Use redland library already on system 650],,) 651AC_ARG_WITH(stlport, 652[ --with-stlport Only building --without-stlport is supported. 653], WITH_STLPORT=$withval , WITH_STLPORT=no) 654AC_ARG_WITH(jdk-home, 655[ --with-jdk-home if you have installed JDK 1.3 or later on your system 656 please supply the path here. 657 Note that this is not the location of the Java binary 658 but the location of the entire distribution. 659 660 Usage: --with-jdk-home=<absolute path to JDK home> 661],,) 662AC_ARG_WITH(java, 663[ --with-java Build with[[out]] Java support. If you use 664 --without-java/--with-java=no then the build will have 665 no support for Java components, applets, accessibility 666 or XML filters. 667], if test "$withval" = "yes"; then WITH_JAVA=java; else WITH_JAVA=$withval; fi, WITH_JAVA=java) 668AC_ARG_ENABLE(gcjaot, 669[ --enable-gcjaot Build with[[out]] using Ahead of Time java compilation 670 support to speed up buildsi by compiling the jars also 671 to native code.. 672 --enable-gcjaot is only known to work with bytecode 673 created with gcj or ecj 674],,) 675AC_ARG_WITH(ant-home, 676[ --with-ant-home If you have installed Apache Ant on your system, 677 please supply the path here. 678 Note that this is not the location of the Ant binary 679 but the location of the entire distribution. 680 681 Usage: --with-ant-home=<absolute path to Ant home> 682],,) 683AC_ARG_WITH(junit, 684[ --with-junit Specifies the JUnit 4 jar file to use for JUnit-based 685 tests. --without-junit disables those tests. Not 686 relevant in the --without-java case. 687 688 Usage: --with-junit=<absolute path to JUnit 4 jar> 689],,with_junit=yes) 690AC_ARG_WITH(hamcrest-core, 691[ --with-hamcrest-core Specifies the hamcrest-core jar file to use for 692 JUnit-based tests. --without-junit disables those 693 tests. Not relevant in the --without-java or 694 --without-junit cases, and only needed for JUnit 695 >= 4.11. 696],,with_hamcrest_core=yes) 697AC_ARG_WITH(perl-home, 698[ --with-perl-home If you have installed the Perl 5 Distribution, on your 699 system, please supply the path here. 700 Note that this is not the location of the Perl binary 701 but the location of the entire distribution. 702 703 Usage: --with-perl-home=<absolute path to Perl 5 home> 704],,) 705AC_ARG_WITH(cl-home, 706[ --with-cl-home For Windows NT users, please supply the path 707 for the Microsoft C/C++ compiler. 708 Note that this is not the location of the compiler 709 binary but the location of the entire distribution. 710 711 Usage: --with-cl-home=<absolute path to Microsoft C/C++ compiler home> 712],,) 713AC_ARG_WITH(mspdb-path, 714[ --with-mspdb-path For Microsoft C/C++ compiler users, please supply the 715 path pointing to the mspdb71.dll (.NET 2003). 716 717 Usage: --with-mspdb-path=<absolute path to mspdb71.dll> 718],,) 719AC_ARG_WITH(midl-path, 720[ --with-midl-path For Microsoft C/C++ .NET compiler users, please supply 721 the path pointing to the midl.exe. 722 723 Usage: --with-midl-path=<absolute path to midl.exe> 724],,) 725AC_ARG_WITH(csc-path, 726[ --with-csc-path For Microsoft C/C++ .NET compiler users, please supply 727 the path pointing to the csc.exe. 728 729 Usage: --with-csc-path=<absolute path to csc.exe> 730],,) 731AC_ARG_WITH(host-python, 732[ --with-host-python For Windows users on a modern MSVC, the Python 3.9 or 733 newer used to RUN the bundled Python's build scripts. 734 It is not the Python that gets shipped. Autodetected 735 from the path; supply it when that finds nothing, or 736 the build would try to download one. 737 738 Usage: --with-host-python=<absolute path to python.exe> 739],,) 740AC_ARG_WITH(nsis-path, 741[ --with-nsis-path For Windows users, please supply the path to the 742 "Nullsoft Scriptable Install System" (NSIS). If NSIS 743 is found in the path or this option is supplied a self 744 contained executable installer for Apache OpenOffice 745 will be created. 746 747 Usage: --with-nsis-path=<absolute path to nsis.exe> 748],,) 749AC_ARG_WITH(frame-home, 750[ --with-frame-home For Microsoft C/C++ .NET compiler users, please supply 751 the path pointing to lib/mscoree.lib, usually 752 something like: 753 "/cygdrive/c/Program Files/Microsoft Visual Studio .NET/FrameworkSDK" 754 755 MS Visual Toolkit compiler users, please supply the 756 path pointing to lib/msvcrt.lib, usually something 757 like: 758 "/cygdrive/c/Program Files/Microsoft Visual Studio .NET 2003/Vc7" 759 760 Usage: --with-frame-home=<absolute path to Framework SDK [[home]]> 761],,) 762AC_ARG_WITH(msbuild-path, 763[ --with-msbuild-path For Windows users building with a VS2015-or-newer 764 toolset: the directory holding MSBuild.exe. Only 765 needed when it is not beside the toolset. 766 767 Usage: --with-msbuild-path=<absolute path to MSBuild.exe directory> 768],,) 769 770AC_ARG_WITH(windows-sdk-home, 771[ --with-windows-sdk-home For Windows users building with a VS2015-or-newer 772 toolset: the root of the Windows 10/11 SDK, i.e. the 773 directory holding Include/, Lib/ and bin/. Only 774 needed when it is not in the default location. 775 776 Usage: --with-windows-sdk-home=<absolute path to Windows Kits\10> 777],,) 778 779AC_ARG_WITH(windows-sdk-version, 780[ --with-windows-sdk-version 781 Pin the Windows 10/11 SDK to one version instead of 782 taking the newest complete one that is installed. 783 784 Usage: --with-windows-sdk-version=10.0.19041.0 785],,) 786 787AC_ARG_WITH(psdk-home, 788[ --with-psdk-home For Windows users, please supply the path to the 789 Microsoft Platform SDK. 790 791 Usage: --with-psdk-home=<absolute path to Microsoft Platform SDK> 792],,) 793AC_ARG_WITH(directx-home, 794[ --with-directx-home For Windows users, please supply the path to the 795 Microsoft DirectX SDK. 796 797 Usage: --with-directx-home=<absolute path to Microsoft DirectX SDK> 798],,) 799AC_ARG_WITH(mozilla-build, 800[ --with-mozilla-build For Windows users, please supply the path to the 801 mozilla build tools. 802 803 Usage: --with-mozilla-build=<absolute path to mozilla build tools> 804 805 At the moment of this writing, an installer for the mozilla build tools 806 can be obtained from https://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32/. 807],[MOZILLABUILD=$withval],) 808AC_ARG_WITH(local-solenv, 809[ --with-local-solenv If you have solenv in a location other than ./solenv, 810 please supply the path here. 811 812 Usage: --with-local-solenv=<absolute path to solenv> 813],,) 814AC_ARG_WITH(local-solver, 815[ --with-local-solver if you have solver in a location other than ./solver, 816 please supply the path here. 817 818 Usage: --with-local-solver=<absolute path to solver> 819],,) 820AC_ARG_ENABLE(javascript, 821[ --disable-javascript Disables support for JavaScript macros. 822],,) 823AC_ARG_WITH(system-coinmp, 824[ --with-system-coinmp Use CoinMP library already installed on the system 825],,) 826AC_ARG_ENABLE(coinmp, 827[ --disable-coinmp Do not use CoinMP as the Calc solver. 828],,) 829AC_ARG_ENABLE(check-only, 830[ --enable-check-only Use this option option if you just want to check your 831 environment. This option stops the generation of an 832 ????env.set 833 834 Usage: --enable-check-only=yes 835],,) 836AC_ARG_ENABLE(ccache-skip, 837[[ --enable-ccache-skip [default=auto] allow the use of --ccache-skip to 838 escape compiler flags that would otherwise prevent 839 caching of the result (currently used on Mac only) 840 NOTE: requires patched version because of a bug in 841 ccache (see issue 104567 for details and patch) 842 explicitly enable if your version of ccache does not 843 identify as version 2.4_OOo 844]],,enable_ccache_skip=auto) 845AC_ARG_WITH(lang, 846[ --with-lang Use this option to build Apache OpenOffice with 847 additional language support. English (US) is always 848 included by default. Separate multiple languages with 849 space. For all languages, use --with-lang=ALL. 850 851 Usage: --with-lang="es sw tu cs sk" 852],,) 853AC_ARG_WITH(poor-help-localizations, 854[ --with-poor-help-localizations 855 Use this option to specify which languages have 856 unusable help localizations. Separate multiple 857 languages with space. 858 859 Usage: --with-poor-help-localizations="af ar be-BY ca" 860],,) 861AC_ARG_WITH(dict, 862[ --with-dict Use this option to build Apache OpenOffice with 863 dictionary support. ALL dictionaries are always 864 included by default unless overridden with 865 this option. Separate multiple dictionaries with 866 commas. For all dictionaries, use --with-dict=ALL. 867 868 Usage: --with-dict=ENGB,ENUS,ITIT 869],,) 870AC_ARG_WITH(intro-bitmaps, 871[ --with-intro-bitmaps Prefer the specified intro bitmaps over the 872 the default one. Can be more than one (separated by 873 commas), the order means priority of fallback if the 874 first does not exist (in the installed tree). 875 876 Usage: --with-intro-bitmaps=/path/my_ooo_intro.png 877],,) 878AC_ARG_WITH(about-bitmaps, 879[ --with-about-bitmaps Similarly to --with-intro-bitmaps, this allows 880 specification of bitmaps for the About box. 881 882 Usage: --with-about-bitmaps=/path/my_ooo_about.png 883],,) 884AC_ARG_WITH(vendor, 885[ --with-vendor Set vendor of the build. 886 887 Usage: --with-vendor="John the Builder" 888],,) 889AC_ARG_WITH(unix-wrapper, 890[ --with-unix-wrapper Redefines the name of the UNIX wrapper that will be used 891 in the desktop files and in the desktop-integration RPMs. 892 893 Usage: --with-unix-wrapper=ooffice 894],,) 895AC_ARG_WITH(asm-home, 896[ --with-asm-home For Windows users, please supply the path for the 897 ml.exe assembler. 898 899 Usage: --with-asm-home=<path to ml.exe directory> 900],,) 901AC_ARG_WITH(nasm-home, 902[ --with-nasm-home For Windows users, please supply the path for the 903 nasm.exe assembler. 904 905 Usage: --with-nasm-home=<path to nasm.exe directory> 906],,) 907AC_ARG_WITH(os-version, 908[ --with-os-version For FreeBSD users, use this option option to override 909 the detected OSVERSION. 910 911 Usage: --with-os-version=<OSVERSION> 912],,) 913AC_ARG_WITH(unzip-home, 914[ --with-unzip-home Deprecated: use --with-zip-home instead],,) 915AC_ARG_WITH(zip-home, 916[ --with-zip-home If you use a non standard zip, for example Windows 917 please supply the path for zip 918 919 Usage: --with-zip-home=<path to zip executable> 920],,) 921AC_ARG_WITH(mingwin, 922[ --with-mingwin For Windows users, use the mingwin32 compiler within 923 cygwin environment 924 925 Usage: --with-mingwin=yes 926 927 For !Windows use, use the mingw32 C++ compiler to 928 (re-) build unowinreg.dll. Specify the MinGW C++ 929 Compilers name. 930 931 Usage: --with-mingwin=i586-mingw32msvc-g++ 932],WITH_MINGWIN=$withval,WITH_MINGWIN=0) 933AC_ARG_WITH(build-version, 934[ --with-build-version Allows the builder to add a custom version tag 935 that will appear in the Help/About box for QA 936 purposes. 937 938 Usage: --with-build-version="Built by Jim" 939],with_build_version=$withval) 940AC_ARG_WITH(alloc, 941[ --with-alloc Define which allocator to build with 942 (choices are oo, system, tcmalloc, jemalloc) 943 944 Note that on FreeBSD/NetBSD system==jemalloc 945],,) 946AC_ARG_ENABLE(jemalloc, 947[ --enable-jemalloc Download, build and bundle jemalloc and use it as the 948 allocator (Linux and macOS only). Use 949 --with-alloc=jemalloc instead to link a jemalloc 950 already installed on the system. 951],,) 952AC_ARG_ENABLE(verbose, 953[ --enable-verbose Increase build verbosity. 954 --disable-verbose Decrease build verbosity. 955],,) 956AC_ARG_ENABLE(dependency-tracking, 957[ --disable-dependency-tracking Disables generation of dependency information. 958],,) 959AC_ARG_ENABLE(category-b, 960[ --enable-category-b Activate components under a category B license 961 (see https://www.apache.org/legal/3party.html#category-b): 962 MPL (hunspell, hyphen, nss, saxon, rhino), 963 CPL (silgraphite), CPL/EPL (CoinMP), OFL (fonts). 964 Flags for individual libraries override this one. 965],,) 966AC_ARG_WITH(arm-target, 967[ --arm-target The minimal targeted arm processor 968 used for the build environment. 969 Cases : 970 arm-target < 6 : armv4t compatibility 971 arm-target = 6 : exact armv6 compatibility 972 arm-target > 6 : armv7-a compatibility 973 974 Usage: --with-arm-target=7 975],with_arm_target=$withval,with_arm_target=4) 976AC_ARG_WITH(macosx-target, 977[ --macosx-target The minimal macOS/OSX deployment and build target 978 979 Usage: --with-macosx-target=11.0 980],with_macosx_target=$withval,with_macosx_target=11.0) 981AC_ARG_WITH(macosx-sdk, 982[ --macosx-sdk The macOS SDK to build against 983 984 Usage: --with-macosx-sdk=10.11 985 (or full path: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk) 986],with_macosx_sdk=$withval,) 987AC_ARG_WITH(macosx-codesigning-identity, 988[ --with-macosx-codesigning-identity 989 Code-sign the macOS application bundle and disk image 990 while packaging, with this codesign identity 991 ("-" for ad-hoc). Unset: package unsigned, as before. 992 Traditional macOS language packs cannot be installed 993 into a signed application because that would invalidate 994 its resource seal. 995 996 Usage: --with-macosx-codesigning-identity="Developer ID Application: ..." 997],with_macosx_codesigning_identity=$withval,) 998AC_ARG_WITH(macosx-codesigning-keychain, 999[ --with-macosx-codesigning-keychain 1000 Keychain holding that identity (default: the 1001 keychain search list, i.e. normally the login keychain). 1002 1003 Usage: --with-macosx-codesigning-keychain=/path/to/build.keychain-db 1004],with_macosx_codesigning_keychain=$withval,) 1005AC_ARG_WITH(macosx-notary-profile, 1006[ --with-macosx-notary-profile 1007 After code-signing with a Developer ID identity, submit 1008 the application and disk image to Apple's notary service 1009 and staple the ticket, using this "xcrun notarytool 1010 store-credentials" keychain profile name. Requires 1011 --with-macosx-codesigning-identity to be a real 1012 Developer ID identity (not "-"). Unset: package signed 1013 but not notarized, as before. 1014 1015 Usage: --with-macosx-notary-profile=my-notary-profile 1016],with_macosx_notary_profile=$withval,) 1017AC_ARG_WITH(rat-scan, 1018[ --with-rat-scan Scan source code for license headers. 1019 Use as --with-rat-scan to automatically download pre-built Rat binaries. 1020 Alternatively use as --with-rat-scan=<path-to-rat-direcetory> to use 1021 a separately installed library. 1022],with_rat_scan=$withval,) 1023 1024BUILD_TYPE="OOo" 1025ADDITIONAL_REPOSITORIES="../ext_libraries" 1026SCPDEFS="" 1027 1028dnl =================================================================== 1029dnl Check configure script vs. configure.ac 1030dnl =================================================================== 1031AC_MSG_CHECKING([whether configure is up-to-date]) 1032if test "configure" -ot "configure.ac"; then 1033 AC_MSG_RESULT([no]) 1034 AC_MSG_ERROR([configure is not up-to-date, run autoconf first!]) 1035else 1036 AC_MSG_RESULT([yes]) 1037fi 1038dnl =================================================================== 1039dnl Message. 1040dnl =================================================================== 1041echo "********************************************************************" 1042echo "* *" 1043echo "* Apache OpenOffice build configuration. *" 1044echo "* *" 1045echo "* The configure process checks your platform to see whether *" 1046echo "* you can build Apache OpenOffice on it. *" 1047echo "* This process checks all pre-requisites and generates a file *" 1048echo "* containing the necessary environment variables. *" 1049echo "* Source this file after configure has ended successfully. *" 1050echo "* *" 1051echo "* Warnings that are generated during the configure process *" 1052echo "* must be taken into account since it can be a reason for *" 1053echo "* an unsuccessful build of Apache OpenOffice. *" 1054echo "* *" 1055echo "********************************************************************" 1056echo "" 1057echo "********************************************************************" 1058echo "* *" 1059echo "* Checking the platform pre-requisites. *" 1060echo "* *" 1061echo "********************************************************************" 1062echo "" 1063dnl =================================================================== 1064dnl Configure pre-requisites. 1065dnl =================================================================== 1066cat /dev/null > warn 1067 1068AC_PROG_EGREP 1069if test -z "$GREP"; then 1070GREP=$EGREP 1071fi 1072AC_PROG_AWK 1073AC_PATH_PROG( AWK, $AWK) 1074 1075dnl =================================================================== 1076dnl A space in $AWK is fatal, so take the 8.3 form when there is one 1077dnl =================================================================== 1078dnl configure.ac spells $AWK unquoted in some forty places, so a path 1079dnl with a space in it does not merely look untidy -- it word-splits, 1080dnl and the build dies a long way from here with 1081dnl 1082dnl ./configure: line NNNN: /cygdrive/c/Program: No such file 1083dnl 1084dnl That is what a Cygwin carrying gawk-<version>.exe but no plain 1085dnl gawk gives you: the only gawk left on PATH is then Git for 1086dnl Windows' copy, under C:\Program Files. 1087dnl 1088dnl Fixing it on the Cygwin side -- copying gawk-<version>.exe to 1089dnl gawk.exe -- does work, and does not survive the next Cygwin 1090dnl update, which is why it keeps coming back. The 8.3 form of the 1091dnl very same file has no space and needs no upkeep at all. 1092case "$AWK" in 1093*\ *) 1094 _awk_short=`cygpath -d "$AWK" 2>/dev/null` 1095 if test -n "$_awk_short"; then 1096 _awk_short=`cygpath -u "$_awk_short" 2>/dev/null` 1097 fi 1098 if test -n "$_awk_short" -a -x "$_awk_short"; then 1099 AC_MSG_NOTICE([$AWK has a space in it, using $_awk_short instead]) 1100 AWK="$_awk_short" 1101 else 1102 AC_MSG_WARN([$AWK has a space in it and has no 8.3 name. 1103Either put a space-free awk earlier on PATH, or enable 8.3 names on that 1104volume; several checks below will fail on the space otherwise.]) 1105 fi 1106 ;; 1107esac 1108if test -z "$AWK"; then 1109 AC_MSG_ERROR([install awk to run this script]) 1110fi 1111 1112AC_PATH_PROGS(SED, sed ) 1113if test -z "$SED"; then 1114 AC_MSG_ERROR([install sed to run this script]) 1115fi 1116 1117AC_MSG_CHECKING([for solenv environment]) 1118if test -z "$with_local_solenv"; then 1119 LOCAL_SOLENV="DEFAULT" 1120 AC_MSG_RESULT([default]) 1121else 1122 LOCAL_SOLENV=$with_local_solenv 1123 AC_MSG_RESULT([$with_local_solenv]) 1124fi 1125AC_SUBST(LOCAL_SOLENV) 1126 1127if test "$LOCAL_SOLENV" = "DEFAULT"; then 1128 _solenv="./solenv" 1129else 1130 _solenv="$LOCAL_SOLENV" 1131fi 1132AC_SUBST(_solenv) 1133 1134if test -e $_solenv/inc/minor.mk; then 1135 # Get UPD number from ./solenv/inc/minor.mk 1136 UPD="`$GREP RSCVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`" 1137 AC_SUBST(UPD) 1138 SOURCEVERSION="`$GREP SOURCEVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`" 1139 AC_SUBST(SOURCEVERSION) 1140else 1141 AC_MSG_ERROR([$_solenv/inc/minor.mk missing but needed for architecture/os detecion and proper environment script generation...]) 1142fi 1143 1144 1145dnl ================================================================== 1146dnl Checks for custom pack.lst 1147dnl ================================================================== 1148AC_MSG_CHECKING([for custom pack.lst]) 1149CUSTOM_PACK_LIST= 1150USE_PACKAGER= 1151if test -n "$with_packager_list" ; then 1152 if test -e $with_packager_list; then 1153 CUSTOM_PACK_LIST=$with_packager_list 1154 USE_PACKAGER=YES 1155 fi 1156fi 1157if test -n "$CUSTOM_PACK_LIST"; then 1158 AC_MSG_RESULT([$CUSTOM_PACK_LIST]) 1159else 1160 AC_MSG_RESULT([no]) 1161fi 1162AC_SUBST(CUSTOM_PACK_LIST) 1163AC_SUBST(USE_PACKAGER) 1164 1165 1166dnl =================================================================== 1167dnl Checks for the operating system and processor. 1168dnl =================================================================== 1169AC_CANONICAL_TARGET 1170if test "$build" != "$host" -o "$build" != "$target" \ 1171 -o "$host" != "$target"; then 1172 AC_MSG_WARN([cross-compiling by any means is not supported (yet)!]) 1173 echo "cross-compiling by any means is not supported (yet)!" >> warn 1174fi 1175 1176if echo "$build_os" | $GREP cygwin; then 1177 AC_MSG_CHECKING([Cygwin version]) 1178 CygwinVer=`uname -r` 1179 AC_MSG_RESULT([$CygwinVer]) 1180 if test "`echo $CygwinVer | $AWK -F . '{ print $1$2 }'`" -lt "15"; then 1181 AC_MSG_ERROR([You need at least Cygwin V1.5.x]) 1182 fi 1183else 1184 CygwinVer="false" 1185fi 1186 1187# get info about the system provided release/version details 1188head /etc/*-release 1189uname -a 1190 1191dnl =================================================================== 1192dnl The following is a list of supported systems. 1193dnl Sequential to keep the logic very simple 1194dnl These values may be checked and reset later. 1195dnl =================================================================== 1196case "$build_os" in 1197 solaris*) 1198 test_gtk=yes 1199 test_cairo=yes 1200 test_kde=yes 1201 test_cups=yes 1202 test_randr=yes 1203 test_freetype=yes 1204 test_gstreamer=yes 1205 _os=SunOS 1206 AC_PATH_PROG( GNUTAR, gtar,,$PATH:/usr/sfw/bin) 1207 if test -z "$GNUTAR"; then 1208 AC_MSG_ERROR([gtar (gnu tar) not found but needed. Install it (SUN Freeware package).]) 1209 fi 1210 AC_SUBST(GNUTAR) 1211 1212 dnl =========================================================== 1213 dnl check whether we're using solaris 6,7,8 - sparc or intel. 1214 dnl =========================================================== 1215 AC_MSG_CHECKING([the Solaris operating system release]) 1216 _os_release=`echo $build_os | $SED -e s/solaris2\.//` 1217 if test "$_os_release" -lt "6"; then 1218 AC_MSG_ERROR([use solaris >= 6 to build Apache OpenOffice]) 1219 else 1220 AC_MSG_RESULT([ok ($_os_release)]) 1221 fi 1222 1223 dnl check whether we're using a sparc or i386 processor 1224 AC_MSG_CHECKING([the processor type]) 1225 if test "$build_cpu" = "sparc" -o "$build_cpu" = "i386"; then 1226 AC_MSG_RESULT([ok ($build_cpu)]) 1227 else 1228 AC_MSG_ERROR([only sparc and i386 processors are supported]) 1229 fi 1230 ;; 1231 linux-gnu*|k*bsd*-gnu*) 1232 test_gtk=yes 1233 test_cairo=yes 1234 test_kde=yes 1235 test_kde4=yes 1236 test_cups=yes 1237 test_randr=yes 1238 test_freetype=yes 1239 test_gstreamer=yes 1240 _os=Linux 1241 ;; 1242 gnu) 1243 test_cups=no 1244 _os=GNU 1245 ;; 1246 cygwin*) # Windows 1247 test_cups=no 1248 test_cairo=yes 1249 test_freetype=no 1250 test_gstreamer=no 1251 _os=WINNT 1252 ;; 1253 darwin*) # Mac OS X 1254 test_cups=yes 1255 test_gtk=yes 1256 test_cairo=yes 1257 test_randr=no 1258 test_freetype=no 1259 test_gstreamer=no 1260 _os=Darwin 1261 if test "$enable_systray" = "yes" && test "$enable_gtk" != "no"; then 1262 AC_MSG_WARN([Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray]) 1263 echo "Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray" >>warn 1264 enable_systray=no 1265 fi 1266 SDKROOT="`xcrun --sdk macosx --show-sdk-path`" 1267 export SDKROOT 1268 if test ! -n "$CC"; then 1269 CC="`xcrun -f clang`" 1270 fi 1271 if test ! -n "$CXX"; then 1272 CXX="`xcrun -f clang++` -std=c++11" 1273 macos_c11=`pwd`/macos_c11 1274 echo "#!/bin/sh" > $macos_c11 1275 echo "$CXX \"\$@\"" >> $macos_c11 1276 chmod 755 $macos_c11 1277 CXX="$macos_c11" 1278 fi 1279 # Don't use OSVERSION until we know no conflicts result from it 1280 _darwin_version="`uname -r | $AWK -F . '{ print $1 }'`" 1281 # Map the Darwin (XNU) major version to the macOS version. 1282 # Darwin 6..19 => macOS 10.(darwin-4) (10.2 .. 10.15) 1283 # Darwin 20+ => macOS (darwin-9) (11, 12, 13, ...) 1284 if test "$_darwin_version" -ge 20; then 1285 _osx_version="`expr $_darwin_version - 9`" 1286 else 1287 _osx_version="10.`expr $_darwin_version - 4`" 1288 fi 1289 AC_MSG_NOTICE([Detected Darwin version: $_darwin_version ($_osx_version)]) 1290 # Detect the build CPU architecture. Apple Silicon (arm64) reports 1291 # "arm64" from uname -m and maps to the aarch64 toolchain/bridge. 1292 _darwin_cpu="`uname -m`" 1293 case "$_darwin_cpu" in 1294 arm64|aarch64) 1295 AC_MSG_NOTICE([Detected Apple Silicon (arm64) build host]) 1296 ;; 1297 x86_64|i*86) 1298 AC_MSG_NOTICE([Detected Intel (x86_64) build host]) 1299 ;; 1300 *) 1301 AC_MSG_ERROR([Unsupported macOS CPU architecture: $_darwin_cpu]) 1302 ;; 1303 esac 1304 ;; 1305 os2*) 1306 test_x=no 1307 test_cups=no 1308 test_randr=no 1309 test_gtk=no 1310 test_freetype=no 1311 test_gstreamer=no 1312 test_cairo=yes 1313 _os=OS2 1314 ;; 1315 freebsd*) 1316 test_gtk=yes 1317 test_cairo=yes 1318 test_kde=yes 1319 test_kde4=yes 1320 test_cups=yes 1321 test_randr=yes 1322 test_freetype=yes 1323 test_gstreamer=yes 1324 AC_MSG_CHECKING([the FreeBSD operating system release]) 1325 if test -n "$with_os_version"; then 1326 OSVERSION="$with_os_version" 1327 else 1328 OSVERSION=`/sbin/sysctl -n kern.osreldate` 1329 fi 1330 AC_MSG_RESULT([found OSVERSION=$OSVERSION]) 1331 AC_MSG_CHECKING([which thread library to use]) 1332 if test "$OSVERSION" -lt "500016"; then 1333 PTHREAD_CFLAGS="-D_THREAD_SAFE" 1334 PTHREAD_LIBS="-pthread" 1335 elif test "$OSVERSION" -lt "502102"; then 1336 PTHREAD_CFLAGS="-D_THREAD_SAFE" 1337 PTHREAD_LIBS="-lc_r" 1338 else 1339 PTHREAD_CFLAGS="" 1340 PTHREAD_LIBS="-pthread" 1341 fi 1342 AC_MSG_RESULT([$PTHREAD_LIBS]) 1343 _os=FreeBSD 1344 ;; 1345 osf) 1346 test_cups=no 1347 test_randr=no 1348 _os=OSF1 1349 ;; 1350 netbsd) 1351 test_gtk=yes 1352 test_cairo=yes 1353 test_kde=yes 1354 test_kde4=yes 1355 test_cups=no 1356 test_randr=yes 1357 test_freetype=yes 1358 test_gstreamer=yes 1359 PTHREAD_CFLAGS="-pthread" 1360 PTHREAD_LIBS="-pthread -lpthread" 1361 _os=NetBSD 1362 ;; 1363 aix*) 1364 test_cups=no 1365 test_randr=no 1366 test_freetype=yes 1367 test_gstreamer=yes 1368 PTHREAD_LIBS=-pthread 1369 echo "AIX is an alpha port --- Use at own risk" >> warn 1370 _os=AIX 1371 ;; 1372 *) 1373 AC_MSG_ERROR([$_os operating system is not suitable to build Apache OpenOffice!]) 1374 ;; 1375esac 1376 1377AC_SUBST(OSVERSION) 1378AC_SUBST(PTHREAD_CFLAGS) 1379AC_SUBST(PTHREAD_LIBS) 1380 1381 1382dnl Ensure pkg-config is initialized before any possible use 1383PKG_PROG_PKG_CONFIG 1384 1385 1386dnl =================================================================== 1387dnl Set the ENABLE_CRASHDUMP variable. 1388dnl =================================================================== 1389AC_MSG_CHECKING([whether to enable crashdump feature]) 1390if test "$enable_crashdump" = "yes"; then 1391 ENABLE_CRASHDUMP="TRUE" 1392 BUILD_TYPE="$BUILD_TYPE CRASHREP" 1393 AC_MSG_RESULT([yes]) 1394else 1395 ENABLE_CRASHDUMP="" 1396 AC_MSG_RESULT([no]) 1397fi 1398AC_SUBST(ENABLE_CRASHDUMP) 1399 1400if test "$_os" = "WINNT"; then 1401 BUILD_TYPE="$BUILD_TYPE TWAIN" 1402fi 1403 1404if test "$_os" = "WINNT"; then 1405 dnl =================================================================== 1406 dnl Set the VC_STANDARD variable. 1407 dnl =================================================================== 1408 AC_MSG_CHECKING([whether to use the standard non-optimizing compiler]) 1409 if test "$enable_cl_standard" = "" -o "$enable_cl_standard" = "no"; then 1410 VC_STANDARD="" 1411 AC_MSG_RESULT([no]) 1412 else 1413 VC_STANDARD="TRUE" 1414 AC_MSG_RESULT([yes]) 1415 fi 1416 AC_SUBST(VC_STANDARD) 1417fi 1418 1419if test "$_os" = "WINNT"; then 1420 dnl =================================================================== 1421 dnl Set the BUILD_X64 variable. 1422 dnl =================================================================== 1423 AC_MSG_CHECKING([whether to build/use the Windows 64bit shell extensions]) 1424 if test "$enable_win_x64_shellext" = "" -o "$enable_win_x64_shellext" = "no"; then 1425 BUILD_X64="" 1426 AC_MSG_RESULT([no]) 1427 else 1428 BUILD_X64="TRUE" 1429 AC_MSG_RESULT([yes]) 1430 fi 1431 AC_SUBST(BUILD_X64) 1432 1433 dnl =================================================================== 1434 dnl Set the BUILD_WIN64 variable. 1435 dnl =================================================================== 1436 AC_MSG_CHECKING([whether to build 64 bit OpenOffice on 64 bit Windows]) 1437 if test "$build_cpu" = "x86_64" ; then 1438 if test "x$enable_win64" != "xno" ; then 1439 BUILD_WIN64="TRUE" 1440 AC_MSG_RESULT([yes]) 1441 OOWINTOOL="./oowintool" 1442 else 1443 BUILD_WIN64="" 1444 AC_MSG_RESULT([no]) 1445 OOWINTOOL="./oowintool --aoo32-on-win64" 1446 fi 1447 else 1448 if test "x$enable_win64" != "xno" ; then 1449 AC_MSG_ERROR([the --enable-win64 option can only be used on an AMD64 CPU]) 1450 fi 1451 BUILD_WIN64="" 1452 AC_MSG_RESULT([no]) 1453 OOWINTOOL="./oowintool" 1454 fi 1455 AC_SUBST(BUILD_WIN64) 1456fi 1457 1458dnl =================================================================== 1459dnl Set the ENABLE_WERROR variable. (Activate --enable-werror) 1460dnl =================================================================== 1461AC_MSG_CHECKING([whether to turn warnings to errors]) 1462if test -n "$enable_werror" && test "$enable_werror" != "no"; then 1463 ENABLE_WERROR="TRUE" 1464 AC_MSG_RESULT([yes]) 1465 AC_MSG_WARN([Turning warnings to errors has no effect in modules or]) 1466 AC_MSG_WARN([on platforms where it has been disabled explicitly]) 1467 echo "Turning warnings to errors has no effect in modules or on platforms where it has been disabled explicitly" >> warn 1468else 1469 ENABLE_WERROR="FALSE" 1470 AC_MSG_RESULT([no]) 1471fi 1472AC_SUBST(ENABLE_WERROR) 1473 1474dnl =================================================================== 1475dnl Set the ENABLE_DEBUG variable. (Activate --enable-symbols) 1476dnl =================================================================== 1477AC_MSG_CHECKING([whether to do a debug build]) 1478if test -n "$enable_debug" && test "$enable_debug" != "no"; then 1479 ENABLE_DEBUG="TRUE" 1480 if test -z "$enable_symbols"; then 1481 enable_symbols="yes" 1482 fi 1483 AC_MSG_RESULT([yes]) 1484else 1485 ENABLE_DEBUG="FALSE" 1486 AC_MSG_RESULT([no]) 1487fi 1488AC_SUBST(ENABLE_DEBUG) 1489 1490dnl =================================================================== 1491dnl Set the ENABLE_DBGUTIL variable 1492dnl =================================================================== 1493AC_MSG_CHECKING([whether to build with additional debug utilities]) 1494if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then 1495 PROEXT="" 1496 PRODUCT="" 1497 PROFULLSWITCH="" 1498 AC_MSG_RESULT([yes]) 1499else 1500 PRODUCT="full" 1501 PROFULLSWITCH="product=full" 1502 PROEXT=".pro" 1503 AC_MSG_RESULT([no, full product build]) 1504fi 1505AC_SUBST(PRODUCT) 1506AC_SUBST(PROFULLSWITCH) 1507AC_SUBST(PROEXT) 1508 1509dnl =================================================================== 1510dnl First setting is whether to include symbols into final build. 1511dnl =================================================================== 1512AC_MSG_CHECKING([whether to include symbols into final build]) 1513if test -n "$enable_symbols" && test "$enable_symbols" != "no"; then 1514 if test "$enable_symbols" = "yes" -o "$enable_symbols" = "TRUE"; then 1515 ENABLE_SYMBOLS="TRUE" 1516 AC_MSG_RESULT([yes]) 1517 else 1518 if test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then 1519 ENABLE_SYMBOLS="SMALL" 1520 AC_MSG_RESULT([yes, small ones]) 1521 else if test "$enable_symbols" != "no" ; then 1522 echo enable symbols is: $enable_symbols 1523 AC_MSG_ERROR([--enable-symbols only accepts yes, TRUE or SMALL as parameter.]) 1524 else 1525 ENABLE_SYMBOLS= 1526 fi 1527 fi 1528 fi 1529else 1530 ENABLE_SYMBOLS= 1531 AC_MSG_RESULT([no]) 1532fi 1533AC_SUBST(ENABLE_SYMBOLS) 1534 1535dnl =================================================================== 1536dnl Set the ENABLE_SANITIZER variable. (Activate --enable-sanitizer) 1537dnl =================================================================== 1538AC_MSG_CHECKING([whether to enable address sanitizer]) 1539if test -n "$enable_sanitizer" && test "$enable_sanitizer" != "no"; then 1540 ENABLE_SANITIZER="TRUE" 1541 AC_MSG_RESULT([yes]) 1542else 1543 ENABLE_SANITIZER="FALSE" 1544 AC_MSG_RESULT([no]) 1545fi 1546AC_SUBST(ENABLE_SANITIZER) 1547 1548dnl =================================================================== 1549dnl Determine if the solver is to be stripped or not. 1550dnl =================================================================== 1551AC_MSG_CHECKING([whether to strip the solver or not.]) 1552if test -n "$enable_strip_solver"; then 1553 if test "$enable_strip_solver" = "yes"; then 1554 DISABLE_STRIP= 1555 else if test "$enable_strip_solver" = "no"; then 1556 DISABLE_STRIP="TRUE" 1557 else 1558 AC_MSG_ERROR([--disable-strip-solver only accepts yes or no as parameter.]) 1559 fi 1560 fi 1561else 1562 if test -n "$ENABLE_SYMBOLS"; then 1563 DISABLE_STRIP="TRUE" 1564 else 1565 DISABLE_STRIP= 1566 fi 1567fi 1568if test -z "$DISABLE_STRIP"; then 1569 AC_MSG_RESULT([yes]) 1570else 1571 AC_MSG_RESULT([no]) 1572fi 1573AC_SUBST(DISABLE_STRIP) 1574 1575dnl =================================================================== 1576dnl Build options 1577dnl =================================================================== 1578 1579# Disable or enable category-B libraries: nss, hunspell, hyphen, saxon, 1580# rhino, silgraphite. 1581 1582# Note that further below they may be enabled or disabled again by 1583# more specific options. 1584 1585ENABLE_CATEGORY_B= 1586 1587AC_MSG_CHECKING([whether to enable category B components]) 1588# Category B modules (libraries): 1589# nss (nss) 1590# hunspell (hunspell) 1591# hyphen (hyphen) 1592# saxon (saxon) 1593# rhino (rhino) 1594# graphite (silgraphite) 1595if test "$enable_category_b" = "yes"; then 1596 ENABLE_CATEGORY_B=YES 1597 enable_nss_module="yes" 1598 enable_hunspell="yes" 1599 enable_hyphen="yes" 1600 enable_saxon="yes" 1601 enable_javascript="yes" 1602 enable_graphite="yes" 1603 enable_coinmp="yes" 1604 enable_category_b_fonts="yes" 1605 1606 AC_MSG_RESULT([yes: allow modules nss, hunspell, hyphen, saxon, rhino, graphite, coinmp to be built]) 1607else 1608 # Disable libraries. 1609 enable_nss_module="no" 1610 enable_hunspell="no" 1611 enable_hyphen="no" 1612 enable_saxon="no" 1613 enable_javascript="no" 1614 enable_graphite="no" 1615 enable_coinmp="no" 1616 enable_category_b_fonts="no" 1617 1618 AC_MSG_RESULT([no: disabled modules nss, hunspell, hyphen, saxon, rhino, graphite, coinmp]) 1619fi 1620AC_SUBST(ENABLE_CATEGORY_B) 1621 1622# gstreamer is used only via pre-installed libraries: not a problem 1623 1624dnl =================================================================== 1625dnl Online Update 1626dnl =================================================================== 1627AC_MSG_CHECKING([whether to enable the Online Update support]) 1628if test "$enable_online_update" = "yes" -o "$enable_online_update" = "TRUE"; then 1629 ENABLE_ONLINE_UPDATE="YES" 1630 SCPDEFS="$SCPDEFS -DENABLE_ONLINE_UPDATE" 1631 AC_MSG_RESULT([yes]) 1632else 1633 ENABLE_ONLINE_UPDATE="" 1634 AC_MSG_RESULT([no]) 1635fi 1636AC_SUBST(ENABLE_ONLINE_UPDATE) 1637 1638dnl =================================================================== 1639dnl Unit Tests 1640dnl =================================================================== 1641AC_MSG_CHECKING([whether to enable unit tests]) 1642if test "$enable_unit_tests" = "yes" -o "$enable_unit_tests" = "TRUE"; then 1643 ENABLE_UNIT_TESTS="YES" 1644 BUILD_TYPE="$BUILD_TYPE GTEST" 1645 AC_MSG_RESULT([yes]) 1646else 1647 ENABLE_UNIT_TESTS="" 1648 AC_MSG_RESULT([no]) 1649fi 1650AC_SUBST(ENABLE_UNIT_TESTS) 1651 1652AC_MSG_CHECKING([whether to enable native CUPS support]) 1653if test "$test_cups" = "yes" -a \( "$enable_cups" = "yes" -o "$enable_cups" = "TRUE" \) ; then 1654 ENABLE_CUPS="TRUE" 1655 AC_MSG_RESULT([yes]) 1656else 1657 ENABLE_CUPS="" 1658 AC_MSG_RESULT([no]) 1659fi 1660AC_SUBST(ENABLE_CUPS) 1661 1662AC_MSG_CHECKING([whether to enable fontconfig support]) 1663if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a \( "$enable_fontconfig" = "yes" -o "$enable_fontconfig" = "TRUE" \); then 1664 ENABLE_FONTCONFIG="TRUE" 1665 AC_MSG_RESULT([yes]) 1666else 1667 ENABLE_FONTCONFIG="" 1668 AC_MSG_RESULT([no]) 1669fi 1670AC_SUBST(ENABLE_FONTCONFIG) 1671 1672dnl =================================================================== 1673dnl find external tarballs. 1674dnl =================================================================== 1675if test -z $TARFILE_LOCATION; then 1676 TARFILE_LOCATION="DEFAULT" 1677fi 1678AC_SUBST(TARFILE_LOCATION) 1679 1680if test -z "$enable_fetch_external" || test "$enable_fetch_external" = "yes" \ 1681 && test -z "$with_system_libs" -a "$with_system_jars" != "no"; then 1682 DO_FETCH_TARBALLS="yes" 1683fi 1684AC_SUBST(DO_FETCH_TARBALLS) 1685 1686if test "$_os" = "WINNT"; then 1687 AC_MSG_CHECKING([whether to use DirectX]) 1688 ENABLE_DIRECT_DRAW="" 1689 if test "$enable_directx" = "yes" -o "$enable_directx" = "TRUE" -o "$enable_directx" = ""; then 1690 ENABLE_DIRECTX="TRUE" 1691 AC_MSG_RESULT([yes]) 1692 else 1693 ENABLE_DIRECTX="" 1694 AC_MSG_RESULT([no]) 1695 fi 1696 AC_SUBST(ENABLE_DIRECTX) 1697 1698 AC_MSG_CHECKING([whether to use ActiveX]) 1699 if test "$enable_activex" = "yes" -o "$enable_activex" = "TRUE" -o "$enable_activex" = ""; then 1700 DISABLE_ACTIVEX="" 1701 AC_MSG_RESULT([yes]) 1702 else 1703 DISABLE_ACTIVEX="TRUE" 1704 AC_MSG_RESULT([no]) 1705 fi 1706 1707 AC_MSG_CHECKING([whether to use ATL]) 1708 if test "$enable_atl" = "yes" -o "$enable_atl" = "TRUE" -o "$enable_atl" = ""; then 1709 DISABLE_ATL="" 1710 AC_MSG_RESULT([yes]) 1711 else 1712 DISABLE_ATL="TRUE" 1713 dnl ActiveX depends on ATL, it should be disabled 1714 DISABLE_ACTIVEX="TRUE" 1715 AC_MSG_RESULT([no]) 1716 fi 1717 1718 AC_SUBST(DISABLE_ATL) 1719 AC_SUBST(DISABLE_ACTIVEX) 1720 1721fi 1722 1723dnl =================================================================== 1724dnl Disable rpath in shared libraries? 1725dnl =================================================================== 1726AC_MSG_CHECKING([whether to use RPATH in shared libraries]) 1727if test "$enable_rpath" = "no"; then 1728 ENABLE_RPATH="no" 1729else 1730 ENABLE_RPATH="yes" 1731fi 1732AC_MSG_RESULT([$ENABLE_RPATH]) 1733AC_SUBST(ENABLE_RPATH) 1734 1735dnl =================================================================== 1736dnl Check extensions to be bundled as literal blobs 1737dnl =================================================================== 1738if test -n "$with_bundled_extension_blobs"; then 1739 BUNDLED_EXTENSION_BLOBS="$with_bundled_extension_blobs" 1740else 1741 BUNDLED_EXTENSION_BLOBS= 1742fi 1743AC_SUBST(BUNDLED_EXTENSION_BLOBS) 1744 1745#dnl =================================================================== 1746#dnl Check extensions that are to be bundled as pre-registered 1747#dnl =================================================================== 1748if test -n "$with_bundled_prereg_extensions"; then 1749 BUNDLED_PREREG_EXTENSIONS="$with_bundled_prereg_extensions" 1750else 1751 BUNDLED_PREREG_EXTENSIONS= 1752fi 1753AC_SUBST(BUNDLED_PREREG_EXTENSIONS) 1754 1755dnl =================================================================== 1756dnl Configure system provided dictionary/hyphenation/thesaurus 1757dnl =================================================================== 1758 AC_MSG_CHECKING([whether to use dicts from external paths]) 1759 if test -n "$with_system_dicts" -a "$with_system_dicts" = "yes"; then 1760 AC_MSG_RESULT([yes]) 1761 SYSTEM_DICTS=YES 1762 AC_MSG_CHECKING([for spelling dictionary directory]) 1763 if test -n "$with_external_dict_dir"; then 1764 DICT_SYSTEM_DIR=file://$with_external_dict_dir 1765 else 1766 DICT_SYSTEM_DIR=file:///usr/share/hunspell 1767 fi 1768 AC_MSG_RESULT([$DICT_SYSTEM_DIR]) 1769 AC_MSG_CHECKING([for hyphenation patterns directory]) 1770 if test -n "$with_external_hyph_dir"; then 1771 HYPH_SYSTEM_DIR=file://$with_external_hyph_dir 1772 else 1773 HYPH_SYSTEM_DIR=file:///usr/share/hyphen 1774 fi 1775 AC_MSG_RESULT([$HYPH_SYSTEM_DIR]) 1776 AC_MSG_CHECKING([for thesaurus directory]) 1777 if test -n "$with_external_thes_dir"; then 1778 THES_SYSTEM_DIR=file://$with_external_thes_dir 1779 else 1780 THES_SYSTEM_DIR=file:///usr/share/mythes 1781 fi 1782 AC_MSG_RESULT([$THES_SYSTEM_DIR]) 1783 else 1784 AC_MSG_RESULT([no]) 1785 SYSTEM_DICTS=NO 1786 fi 1787AC_SUBST(SYSTEM_DICTS) 1788AC_SUBST(DICT_SYSTEM_DIR) 1789AC_SUBST(HYPH_SYSTEM_DIR) 1790AC_SUBST(THES_SYSTEM_DIR) 1791 1792if test $_os = "WINNT"; then 1793 AC_MSG_CHECKING([Windows build environment sanity]) 1794 dnl =================================================================== 1795 dnl Sanity check! Native Windows programs cannot use cygwin symlinks! 1796 dnl =================================================================== 1797 dnl As long as awk instead of $AWK is used somewhere in the sources, 1798 dnl check for $AWK and awk. $AWK is pointing to gawk in cygwin. 1799 dnl Quoted: either side can be a path with a space in it, and an 1800 dnl unquoted one splits into "test: too many arguments" here. 1801 if test -L "$AWK" -o -L "`which awk`" ; then 1802 AC_MSG_ERROR([$AWK / awk is a cygwin symlink! 1803Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1804link, and copy the program to the name of the link.]) 1805 fi 1806 if test -L `which tar` ; then 1807 AC_MSG_ERROR([tar is a cygwin symlink! 1808Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1809link, and copy the program to the name of the link.]) 1810 fi 1811 if test -L `which gunzip` ; then 1812 AC_MSG_ERROR([gunzip is a cygwin symlink! 1813Native Windows programs cannot use cygwin symlinks. Remove the symbolic 1814link, and copy the program to the name of the link.]) 1815 fi 1816 dnl =================================================================== 1817 dnl Another sanity check! More a band-aid. winenv.* adds guw.exe to 1818 dnl CC and CXX but the configure checks here assume that guw.exe 1819 dnl (if needed at all) is not yet present. 1820 dnl =================================================================== 1821 CC=`echo $CC | $SED "s/^guw.exe //"` 1822 CXX=`echo $CXX | $SED "s/^guw.exe //"` 1823 dnl =================================================================== 1824 dnl If $CC is set to a MinGW compiler, e.g. "gcc -mno-cygwin" enable 1825 dnl $WITH_MINGWIN 1826 dnl =================================================================== 1827 if test -n "$CC";then 1828 if test "`$CC -dumpmachine 2>/dev/null | $SED -e 's/^.*-//'`" = "mingw32"; then 1829 WITH_MINGWIN="yes" 1830 fi 1831 fi 1832 dnl =================================================================== 1833 if test "$WITH_MINGWIN" = "yes" ; then 1834 if test -z "$CC"; then 1835 CC="gcc -mno-cygwin" 1836 CXX="g++ -mno-cygwin" 1837 fi 1838 fi 1839 AC_MSG_RESULT([ok]) 1840fi 1841AC_SUBST(WITH_MINGWIN) 1842 1843dnl =================================================================== 1844dnl Extra check for Windows. cygwin builds need gcc to build dmake 1845dnl and g++ to build guw.exe although MS cl (or MinGW) is used to 1846dnl build AOO. 1847dnl =================================================================== 1848if test "$_os" = "WINNT" ; then 1849 AC_MSG_CHECKING([for cygwin gcc/g++]) 1850 if which gcc > /dev/null && which g++ > /dev/null ; then 1851 AC_MSG_RESULT([found]) 1852 else 1853 AC_MSG_ERROR([cygwin gcc and g++ are needed, please install them.]) 1854 fi 1855fi 1856 1857 1858dnl =================================================================== 1859dnl Check whether the bash shell can be used. 1860dnl =================================================================== 1861AC_PATH_PROG(SHELLPATH, bash) 1862if test -z "$SHELLPATH"; then 1863 AC_MSG_ERROR([bash not found in \$PATH]) 1864else 1865 SHELLPATH=`echo $SHELLPATH | $SED -n "s/\/bash$//p"` 1866fi 1867AC_SUBST(SHELLPATH) 1868 1869dnl =================================================================== 1870dnl Checks for c compiler, 1871dnl The check for the c++ compiler is later on. 1872dnl =================================================================== 1873AC_MSG_CHECKING([gcc home]) 1874if test -z "$with_gcc_home"; then 1875 GCC_HOME=`which gcc | $SED -e s,/bin/gcc,,` 1876else 1877 GCC_HOME="$with_gcc_home" 1878fi 1879AC_MSG_RESULT($GCC_HOME) 1880AC_SUBST(GCC_HOME) 1881 1882save_CC=$CC 1883save_CXX=$CXX 1884 1885if test -n "$with_gcc_home"; then 1886 if test -z "$CC"; then 1887 CC="$with_gcc_home/bin/gcc" 1888 fi 1889fi 1890 1891dnl The following checks for gcc, cc and then cl (if it weren't guarded for win32) 1892if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 1893 AC_PROG_CC 1894fi 1895 1896dnl Newer autoconf (>= 2.70) probes for the highest C standard the compiler 1897dnl accepts and appends it (e.g. -std=gnu23) to $CC. That breaks bundled 1898dnl module configure scripts (nss/nspr, ...) which pass CC=$(CC) unquoted as 1899dnl an inline environment assignment: the embedded space makes the shell 1900dnl treat -std=gnu23 as a command ("-std=gnu23: command not found"). We pin 1901dnl the C dialect per-module in solenv/inc/*.mk anyway, so strip the appended 1902dnl -std= token and keep $CC a single bare compiler word. 1903CC=`echo "$CC" | $SED 's/ -std=[[^ ]]*//g'` 1904 1905COMPATH=`dirname "$CC"` 1906if test "$COMPATH" = "." ; then 1907 AC_PATH_PROGS(COMPATH, $CC) 1908 dnl double square bracket to get single because of M4 quote... 1909 COMPATH=`echo $COMPATH | $SED "s@/[[^/:]]*\\\$@@"`; 1910fi 1911CC_PATH="$COMPATH/" 1912COMPATH=`echo $COMPATH | $SED "s@/[[Bb]][[Ii]][[Nn]]\\\$@@"`; 1913 1914dnl =================================================================== 1915dnl Test the gcc version, 3 is OK 1916dnl =================================================================== 1917GCCVER=20995 1918if test \( "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes" \) -a "$GCC" = "yes"; then 1919 AC_MSG_CHECKING([the GNU gcc compiler version]) 1920 _gcc_version=`$CC -dumpversion` 1921 _gcc_major=`echo $_gcc_version | $AWK -F. '{ print \$1 }'` 1922 GCCVER=`echo $_gcc_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 1923 1924 if test "$_gcc_major" -lt "3"; then 1925 AC_MSG_ERROR([found version "$_gcc_version", use version 3+ of the gcc compiler]) 1926 else 1927 if test "$GCCVER" -eq "030203"; then 1928 if test "$ENABLE_SYMBOLS" = "SMALL"; then 1929 AC_MSG_ERROR([version "$_gcc_version" gives internal error with small.]) 1930 fi 1931 fi 1932 fi 1933 if test "$_os" = "Darwin" ; then 1934 AC_MSG_RESULT([implicitly using CC=$CC]) 1935 else 1936 AC_MSG_RESULT([checked (gcc $_gcc_version)]) 1937 fi 1938 if test "$_os" = "SunOS"; then 1939 AC_MSG_CHECKING([gcc linker]) 1940 if $CC -Wl,--version 2>&1 |head -n 1| $GREP -v GNU > /dev/null;then 1941 AC_MSG_ERROR([failed (not GNU ld). Use GNU ld instead of Sun ld on Solaris]) 1942 fi 1943 AC_MSG_RESULT([ok (GNU ld)]) 1944 fi 1945fi 1946AC_SUBST(GCCVER) 1947 1948HAVE_LD_BSYMBOLIC_FUNCTIONS= 1949if test "$GCC" = "yes"; then 1950 AC_MSG_CHECKING( for -Bsymbolic-functions linker support ) 1951 bsymbolic_functions_ldflags_save=$LDFLAGS 1952 LDFLAGS="$LDFLAGS -Wl,-Bsymbolic-functions -Wl,--dynamic-list-cpp-new -Wl,--dynamic-list-cpp-typeinfo" 1953 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 1954 #include <stdio.h> 1955 ],[ 1956 printf ("hello world\n"); 1957 ])], HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE, []) 1958 if test "z$HAVE_LD_BSYMBOLIC_FUNCTIONS" = "zTRUE"; then 1959 AC_MSG_RESULT( found ) 1960 else 1961 AC_MSG_RESULT( not found ) 1962 fi 1963 LDFLAGS=$bsymbolic_functions_ldflags_save 1964fi 1965AC_SUBST(HAVE_LD_BSYMBOLIC_FUNCTIONS) 1966 1967dnl =================================================================== 1968dnl Set the ENABLE_PCH variable. (Activate --enable-pch) 1969dnl =================================================================== 1970AC_MSG_CHECKING([whether to enable pch feature]) 1971if test -n "$enable_pch" && test "$enable_pch" != "no"; then 1972 if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 1973 ENABLE_PCH="TRUE" 1974 AC_MSG_RESULT([yes]) 1975dnl There is no PCH support in GCC versions prior to this 1976 elif test "$GCC" = "yes" -a "$GCCVER" -gt "030400"; then 1977 ENABLE_PCH="TRUE" 1978 AC_MSG_RESULT([yes]) 1979 else 1980 ENABLE_PCH="" 1981 AC_MSG_WARN([Precompiled header not yet supported for your platform/compiler]) 1982 fi 1983else 1984 ENABLE_PCH="" 1985 AC_MSG_RESULT([no]) 1986fi 1987AC_SUBST(ENABLE_PCH) 1988 1989dnl =================================================================== 1990dnl Search all the common names for GNU make 1991dnl =================================================================== 1992AC_MSG_CHECKING([for GNU make]) 1993for a in "$MAKE" "$GNUMAKE" make gmake gnumake; do 1994 $a --version 2> /dev/null | $GREP GNU 2>&1 > /dev/null 1995 if test $? -eq 0; then 1996 GNUMAKE=$a 1997 break 1998 fi 1999done 2000AC_MSG_RESULT($GNUMAKE) 2001if test -z "$GNUMAKE"; then 2002 AC_MSG_ERROR([not found. install GNU make.]) 2003fi 2004 2005AC_MSG_CHECKING([the GNU make version]) 2006_make_version=`$GNUMAKE --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 2007_make_longver=`echo $_make_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 2008if test "$_make_longver" -ge "038100" ; then 2009 AC_MSG_RESULT([$GNUMAKE $_make_version]) 2010else 2011 AC_MSG_ERROR([failed ($GNUMAKE version >= 3.81 needed]) 2012fi 2013AC_SUBST(GNUMAKE) 2014 2015dnl =================================================================== 2016dnl Search for a pre-installed dmake 2017dnl =================================================================== 2018AC_MSG_CHECKING([for dmake]) 2019DMAKE="no" 2020# Override system dmake if --with-dmake-path or --with-dmake-url is used. 2021if test -z "$with_dmake_path" && test -z "$with_dmake_url"; then 2022 AC_PATH_PROG(DMAKE, dmake, no) 2023 IS_SYSTEM_DMAKE=NO 2024 if test "$DMAKE" != "no"; then 2025 AC_MSG_RESULT([using system dmake]) 2026 DMAKE_PATH="$DMAKE" 2027 IS_SYSTEM_DMAKE=YES 2028 fi 2029elif test -n "$with_dmake_path" ; then 2030 # Did not find pre-installed dmake. 2031 # Is it at a nonstandard location provided by --with-dmake-path ? 2032 AC_MSG_NOTICE([looking for dmake at $DMAKE_PATH]) 2033 if test -x "$with_dmake_path" ; then 2034 AC_MSG_RESULT([using user provided dmake]) 2035 DMAKE=$with_dmake_path 2036 fi 2037fi 2038 2039DMAKE_URL= 2040if test "$DMAKE" = "no"; then 2041 AC_MSG_NOTICE([no system or user-provided dmake found]) 2042 # Check if a URL was supplied from which we can download the source and compile it. 2043 if test -n "$with_dmake_url" ; then 2044 # At this moment we can not verify the URL or the content that we want to download. 2045 # Neither can we apply the test below for ruling out that it is the SunStudio dmake. 2046 DMAKE_URL=$with_dmake_url 2047 AC_MSG_RESULT([dmake will be downloaded and compiled in bootstrap]) 2048 DMAKE= 2049 BUILD_DMAKE=YES 2050 else 2051 AC_MSG_ERROR([no URL for dmake source code specified, either. Use --with-dmake-url to supply an URL; run configure with the --help option for a list of possible URLs.]) 2052 fi 2053else 2054 AC_MSG_CHECKING([whether the found dmake is the right dmake]) 2055 # we need to find out whether that dmake we found is "our" dmake 2056 # or the dmake from Sun's SunStudio Compiler which is something 2057 # different 2058 # This test _should_ work because the one accepts -V (ours) and one 2059 # (the other) not... 2060 $DMAKE -V 2>/dev/null | $GREP -E 'dmake(.exe)? .* Version .*' >/dev/null 2061 if test $? -eq 0; then 2062 BUILD_DMAKE=NO 2063 AC_MSG_RESULT([yes]) 2064 AC_MSG_CHECKING([the dmake version]) 2065 DMAKE_VERSION=`$DMAKE -V | $AWK '$3 == "Version" {print $4}'` 2066 if test "`echo $DMAKE_VERSION | cut -d'.' -f1`" -gt "4"; then 2067 AC_MSG_RESULT([OK, >= 4.11]) 2068 elif test "`echo $DMAKE_VERSION | cut -d'.' -f1`" = "4" && \ 2069 test "`echo $DMAKE_VERSION | cut -d'.' -f2`" -ge "11"; then 2070 AC_MSG_RESULT([OK, >= 4.11]) 2071 else 2072 AC_MSG_ERROR([too old. >= 4.11 is needed]) 2073 DMAKE=no 2074 fi 2075 else 2076 AC_MSG_WARN([no]) 2077 DMAKE=no 2078 fi 2079fi 2080if test "$DMAKE" = "no"; then 2081 AC_MSG_ERROR([please use --with-dmake-path or --with-dmake-url to specify dmake executable or source]) 2082fi 2083AC_SUBST(DMAKE_URL) 2084AC_SUBST(BUILD_DMAKE) 2085AC_SUBST(DMAKE_PATH) 2086AC_SUBST(IS_SYSTEM_DMAKE) 2087 2088 2089dnl =================================================================== 2090dnl Search all the common names for GNU or BSD tar 2091dnl =================================================================== 2092AC_MSG_CHECKING([for GNU or compatible BSD tar]) 2093for a in $GNUTAR gtar gnutar bsdtar tar; do 2094 $a --version 2> /dev/null | $EGREP "GNU|libarchive" 2>&1 > /dev/null 2095 if test $? -eq 0; then 2096 GNUTAR=$a 2097 break 2098 fi 2099done 2100AC_MSG_RESULT($GNUTAR) 2101if test -z "$GNUTAR"; then 2102 AC_MSG_ERROR([not found. install GNU tar.]) 2103fi 2104 2105AC_SUBST(GNUTAR) 2106 2107dnl =================================================================== 2108dnl Search for xz, needed to unpack .tar.xz external dependency tarballs 2109dnl =================================================================== 2110AC_MSG_CHECKING([for xz]) 2111for a in $XZ xz; do 2112 $a --version 2> /dev/null > /dev/null 2113 if test $? -eq 0; then 2114 XZ=$a 2115 break 2116 fi 2117done 2118if test -z "$XZ"; then 2119 AC_MSG_RESULT([not found]) 2120 AC_MSG_WARN([xz not found - building with a .tar.xz external dependency will fail. Install xz-utils.]) 2121 echo "xz not found - building with a .tar.xz external dependency will fail. Install xz-utils." >> warn 2122else 2123 AC_MSG_RESULT($XZ) 2124fi 2125AC_SUBST(XZ) 2126 2127dnl =================================================================== 2128dnl Test the solaris compiler version 2129dnl =================================================================== 2130if test "$_os" = "SunOS"; then 2131 if test "$CC" = "cc"; then 2132 AC_PATH_PROGS(_cc, cc) 2133 COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"` 2134 AC_MSG_CHECKING([the SunStudio C/C++ compiler version]) 2135 dnl cc -V outputs to standard error!!!! 2136 _sunstudio_string=`$CC -V 2>&1 | $GREP '^cc' | sed -e 's/.* C //'` 2137 _sunstudio_version=`echo $_sunstudio_string | $AWK '{ print $1 }'` 2138 _sunstudio_major=`echo $_sunstudio_version | $AWK -F. '{ print $1 }'` 2139 if test "$_sunstudio_major" != "5"; then 2140 AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler]) 2141 else 2142 _sunstudio_minor=`echo $_sunstudio_version | $AWK -F. '{ if ($2 == 5) print "true"; else if ($2 == 7) print "true"; else if ($2 == 8) print "true"; else if ($2 == 9) print "true"; else print "false" }'` 2143 if test "$_sunstudio_minor" = "false"; then 2144 AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the SunStudio C/C++ compiler]) 2145 else 2146 dnl compiler will do 2147 AC_MSG_RESULT([checked]) 2148 fi 2149 fi 2150 fi 2151fi 2152 2153if test "$GCC" = "yes"; then 2154 AC_MSG_CHECKING( for --hash-style=both linker support ) 2155 hash_style_ldflags_save=$LDFLAGS 2156 LDFLAGS="$LDFLAGS -Wl,--hash-style=both" 2157 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 2158 #include <stdio.h> 2159 ],[ 2160 printf ("hello world\n"); 2161 ])], HAVE_LD_HASH_STYLE=TRUE, HAVE_LD_HASH_STYLE=FALSE) 2162 if test "z$HAVE_LD_HASH_STYLE" = "zTRUE"; then 2163 AC_MSG_RESULT( found ) 2164 else 2165 AC_MSG_RESULT( not found ) 2166 fi 2167 LDFLAGS=$hash_style_ldflags_save 2168fi 2169AC_SUBST(HAVE_LD_HASH_STYLE) 2170 2171dnl =================================================================== 2172dnl Test the Compaq compiler for OSF1 2173dnl =================================================================== 2174if test "$_os" = "OSF1"; then 2175 if test "$CC" = "cc"; then 2176 AC_PATH_PROGS(_cc, cc) 2177 COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"` 2178 AC_MSG_WARN([******* $_cc , $COMPATH]) 2179 AC_MSG_CHECKING([the Compaq C compiler version]) 2180 dnl cc -V outputs to standard error!!!! 2181 _compaqc_version=`$CC -V 2>&1 | $AWK '{ print $3 }'` 2182 _compaqc_major=`echo $_compaqc_version | $AWK -F. '{ print $1 }'` 2183 if test "$_compaqc_major" != "T6"; then 2184 AC_MSG_ERROR([found version "$_compaqc_version", use version 6 of the Compaq C compiler]) 2185 else 2186 dnl compiler will do 2187 AC_MSG_RESULT([checked]) 2188 fi 2189 fi 2190fi 2191 2192dnl =================================================================== 2193dnl Check whether there's a Perl version available. 2194dnl =================================================================== 2195if test -z "$with_perl_home"; then 2196 AC_PATH_PROG(PERL, perl) 2197else 2198 if test "$_os" = "WINNT"; then 2199 with_perl_home=`cygpath -u "$with_perl_home"` 2200 fi 2201 _perl_path="$with_perl_home/bin/perl" 2202 if test -x "$_perl_path"; then 2203 PERL=$_perl_path 2204 else 2205 AC_MSG_ERROR([$_perl_path not found]) 2206 fi 2207fi 2208 2209dnl =================================================================== 2210dnl Testing for Perl version 5 or greater. 2211dnl $] is the perl version variable, it is returned as an integer 2212dnl =================================================================== 2213if test "$PERL"; then 2214 AC_MSG_CHECKING([the Perl version]) 2215 ${PERL} -e "exit($]);" 2216 _perl_version=$? 2217 if test "$_perl_version" -lt 5; then 2218 AC_MSG_ERROR([found Perl version "$_perl_version", use version 5 of Perl]) 2219 fi 2220 AC_MSG_RESULT([checked (perl $_perl_version)]) 2221else 2222 AC_MSG_ERROR([Perl not found, install version 5 of Perl]) 2223fi 2224AC_SUBST(PERL) 2225 2226dnl =================================================================== 2227dnl Testing for required Perl modules 2228dnl The list of required Perl modules is documented here: 2229dnl https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO#General_Build_Requirements 2230dnl =================================================================== 2231AC_MSG_CHECKING([for required Perl modules]) 2232if `$PERL -e 'use Archive::Zip; 2233 use LWP::UserAgent; 2234 use XML::Parser; 2235 use Digest::SHA; 2236 use Digest::MD5; 2237 use LWP::Protocol::https;'>/dev/null 2>&1`; then 2238 AC_MSG_RESULT([all modules found]) 2239else 2240 # Find out which modules are missing. 2241 missing_perl_modules= 2242 if ! `$PERL -e 'use Archive::Zip;'>/dev/null 2>&1`; then 2243 missing_perl_modules=Archive::Zip 2244 fi 2245 if ! `$PERL -e 'use LWP::UserAgent;'>/dev/null 2>&1`; then 2246 missing_perl_modules="$missing_perl_modules LWP::UserAgent" 2247 fi 2248 if ! `$PERL -e 'use XML::Parser;'>/dev/null 2>&1`; then 2249 missing_perl_modules="$missing_perl_modules XML::Parser" 2250 fi 2251 if ! `$PERL -e 'use Digest::SHA;'>/dev/null 2>&1`; then 2252 missing_perl_modules="$missing_perl_modules Digest::SHA" 2253 fi 2254 if ! `$PERL -e 'use Digest::MD5;'>/dev/null 2>&1`; then 2255 missing_perl_modules="$missing_perl_modules Digest::MD5" 2256 fi 2257 if ! `$PERL -e 'use LWP::Protocol::https;'>/dev/null 2>&1`; then 2258 missing_perl_modules="$missing_perl_modules LWP::Protocol::https" 2259 fi 2260 AC_MSG_ERROR([ 2261 The missing Perl modules are: $missing_perl_modules 2262 Install them as superuser/administrator with "cpan -i $missing_perl_modules"]) 2263fi 2264 2265dnl =================================================================== 2266dnl Check which Microsoft C/C++ or MinGW compiler is used for WINNT 2267dnl =================================================================== 2268if test "$_os" = "WINNT"; then 2269 if test "$WITH_MINGWIN" != "yes"; then 2270 AC_MSG_CHECKING([for friendly registry keys]) 2271 # VS.Net 2003, VS.Net 2005 2272 if test -z "$with_cl_home"; then 2273 vctest=`$OOWINTOOL --msvc-productdir`; 2274 if test -x "$vctest/bin/cl.exe"; then 2275 with_cl_home=$vctest; 2276 fi 2277 else 2278 with_cl_home=`cygpath -u "$with_cl_home"` 2279 fi 2280 AC_MSG_RESULT([done]) 2281 2282 dnl =========================================================== 2283 dnl Which MSVC layout is --with-cl-home pointing at? 2284 dnl =========================================================== 2285 dnl VS2008 (VC9) keeps cl.exe in VC/bin and its debug-info server 2286 dnl (mspdb80.dll) somewhere else entirely -- Common7/IDE, or the 2287 dnl Windows SDK's own bin. From VS2015 on the toolset is versioned, 2288 dnl self-contained and reached as 2289 dnl VC/Tools/MSVC/<toolset>/bin/Host<host>/<target>/cl.exe 2290 dnl with its headers in <toolset>/include, its import libraries in 2291 dnl <toolset>/lib/<target>, and mspdb140.dll next to cl.exe. 2292 dnl Detecting the layout here lets the mspdb hunt and the VC/bin 2293 dnl logic below stay exactly as they were for VC9. 2294 MSVC_MODERN= 2295 if test -d "$with_cl_home/bin/Hostx86" -o -d "$with_cl_home/bin/Hostx64"; then 2296 MSVC_MODERN="TRUE" 2297 fi 2298 2299 dnl =========================================================== 2300 dnl Check for mspdb71.dll/mspdb80.dll 2301 dnl =========================================================== 2302 dnl VC9 and older only: a modern toolset ships its mspdb*.dll in the 2303 dnl same directory as cl.exe, which the compile actions already have 2304 dnl on PATH. 2305 if test -z "$MSVC_MODERN"; then 2306 dnl .NET 2003/5/8 Compiler 2307 if test -n "$with_mspdb_path";then 2308 with_mspdb_path=`cygpath -u "$with_mspdb_path"` 2309 fi 2310 if test -e "$with_mspdb_path/mspdb71.dll" -o -e "$with_mspdb_path/mspdb80.dll"; then 2311 MSPDB_PATH="$with_mspdb_path" 2312 fi 2313 dnl .NET 2003 case 2314 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb71.dll"; then 2315 MSPDB_PATH="$with_cl_home/../Common7/IDE" 2316 fi 2317 dnl .NET 2005/2008 case 2318 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb80.dll"; then 2319 MSPDB_PATH="$with_cl_home/../Common7/IDE" 2320 fi 2321 dnl Windows SDK 6.0 case 2322 if test -z "$MSPDB_PATH" -a -e "$with_cl_home/bin/mspdb80.dll"; then 2323 MSPDB_PATH="$with_cl_home/bin" 2324 fi 2325 2326 if test -z "$MSPDB_PATH";then 2327 dnl AC_PATH_PROG only checks if MSPDB_PATH is still empty 2328 AC_PATH_PROG(MSPDB_PATH, mspdb80.dll) 2329 AC_PATH_PROG(MSPDB_PATH, mspdb71.dll) 2330 MSPDB_PATH=`dirname "$MSPDB_PATH"` 2331 fi 2332 2333 if test -z "$MSPDB_PATH"; then 2334 AC_MSG_ERROR([You need a mspdb71.dll/mspdb80.dll, make sure it's in the path or use --with-mspdb-path]) 2335 fi 2336 MSPDB_PATH=`cygpath -d "$MSPDB_PATH"` 2337 MSPDB_PATH=`cygpath -u "$MSPDB_PATH"` 2338 dnl The path needs to be added before cl is called 2339 PATH="$MSPDB_PATH:$PATH" 2340 fi 2341 2342 AC_MSG_CHECKING([the Microsoft C/C++ Compiler]) 2343 dnl A modern toolset splits bin/ by HOST and then by TARGET, so the 2344 dnl cross compiler is a directory rather than VC9's "bin/amd64" 2345 dnl suffix. Prefer a Hostx64 tree when one exists: the x64-hosted 2346 dnl compiler is not confined to a 2GB address space, which matters 2347 dnl on the larger translation units in this tree. 2348 if test -n "$MSVC_MODERN"; then 2349 if test -d "$with_cl_home/bin/Hostx64"; then 2350 cl_host="Hostx64" 2351 else 2352 cl_host="Hostx86" 2353 fi 2354 case "$build_cpu" in 2355 i?86) 2356 cl_subdirectory="bin/$cl_host/x86" 2357 ;; 2358 x86_64) 2359 if test "$BUILD_WIN64" = "TRUE" ; then 2360 cl_subdirectory="bin/$cl_host/x64" 2361 else 2362 cl_subdirectory="bin/$cl_host/x86" 2363 fi 2364 ;; 2365 *) 2366 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2367 ;; 2368 esac 2369 else 2370 case "$build_cpu" in 2371 i?86) 2372 cl_subdirectory="bin" 2373 ;; 2374 x86_64) 2375 if test "$BUILD_WIN64" = "TRUE" ; then 2376 cl_subdirectory="bin/amd64" 2377 else 2378 cl_subdirectory="bin" 2379 fi 2380 ;; 2381 *) 2382 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2383 ;; 2384 esac 2385 fi 2386 if test -x "$with_cl_home/$cl_subdirectory/cl.exe"; then 2387 CC="$with_cl_home/$cl_subdirectory/cl.exe" 2388 COMPATH="$with_cl_home" 2389 # This gives us a posix path with 8.3 filename restrictions 2390 CC=`cygpath -d "$CC"` 2391 CC=`cygpath -u "$CC"` 2392 COMPATH=`cygpath -d "$COMPATH"` 2393 COMPATH=`cygpath -u "$COMPATH"` 2394 # Remove /cl.exe from CC case insensitive 2395 AC_MSG_RESULT([found ($CC)]) 2396 dnl VC9 spells it VC/Include, a modern toolset spells it 2397 dnl <toolset>/include. NTFS is case-insensitive so either 2398 dnl name resolves, but only one of the two directories exists. 2399 if test -n "$MSVC_MODERN"; then 2400 export INCLUDE=`cygpath -d "$COMPATH/include"` 2401 else 2402 export INCLUDE=`cygpath -d "$COMPATH/Include"` 2403 fi 2404 dnl Check which Microsoft C/C++ compiler is found 2405 AC_MSG_CHECKING([the Version of Microsoft C/C++ Compiler]) 2406dnl The following find microsoft, matches nn.nn.nnnn then pulls numbers out. 2407 CCTXTVER=`$CC 2>&1 | head -n1` 2408 CCNUMVER=`echo $CCTXTVER | $AWK "/Microsoft/ && /..\\...\\...../ { 2409 x = match( \\\$0, /..\\...\\...../ ) 2410 CCversion = substr( \\\$0, RSTART, RLENGTH) 2411 tokencount = split (CCversion,vertoken,\".\") 2412 for ( i = 1 ; i <= tokencount ; i++ ) { 2413 printf (\"%04d\",vertoken[[i]] ) 2414 } 2415 }"` 2416 AC_MSG_RESULT([found Compiler version $CCNUMVER in "$CCTXTVER"]) 2417 dnl COMEX names the compiler generation the rest of the build 2418 dnl switches on: it selects solenv/inc/wntmsci<COMEX>.mk, the 2419 dnl CVER define, and the wntmsci<COMEX> output tree. 14 is the 2420 dnl UCRT generation -- VS2015 (cl 19.00) and everything since, 2421 dnl which share one CRT and one SDK layout. There is 2422 dnl deliberately no value per Visual Studio release: nothing in 2423 dnl this tree distinguishes VS2017 from VS2022. 2424 if test "$CCNUMVER" -ge "001900000000"; then 2425 COMEX=14 2426 MSVSVER=2015 2427 AC_MSG_RESULT([found a UCRT-generation compiler (VS2015 or newer).]) 2428 if test -z "$MSVC_MODERN"; then 2429 AC_MSG_ERROR([cl.exe reports version $CCNUMVER, i.e. VS2015 or newer, but $with_cl_home has no bin/Host* layout. Point --with-cl-home at the versioned toolset directory, e.g. .../VC/Tools/MSVC/14.29.30133]) 2430 fi 2431 elif test "$CCNUMVER" -ge "001500000000"; then 2432 COMEX=12 2433 MSVSVER=2008 2434 AC_MSG_RESULT([found .NET 2008 / VS 9.0.]) 2435 if test -n "$MSVC_MODERN"; then 2436 AC_MSG_ERROR([$with_cl_home has a modern bin/Host* layout but its cl.exe reports version $CCNUMVER. Refusing to guess which of the two it is.]) 2437 fi 2438 else 2439 AC_MSG_ERROR([Compiler too old. Use Microsoft C/C++ .NET 2008, or a VS2015-or-newer toolset.]) 2440 fi 2441 else 2442 AC_MSG_ERROR([Microsoft C/C++ Compiler not found. Use --with-cl-home.]) 2443 fi 2444 else 2445 AC_MSG_CHECKING([the Mingwin32 C++ Compiler]) 2446 if test `$CC -dumpmachine | $SED -e 's/^.*-//'` = "mingw32"; then 2447 AC_MSG_RESULT([found.]) 2448 if $CC -dumpspecs | $GREP -q "mno-cygwin"; then 2449 USE_MINGW="cygwin" 2450 else 2451 USE_MINGW="pure-mingw" 2452 fi 2453 else 2454 AC_MSG_ERROR([Mingwin32 C++ Compiler not found.]) 2455 fi 2456 fi 2457fi 2458AC_SUBST(COMEX) 2459AC_SUBST(MSPDB_PATH) 2460AC_SUBST(MSVC_MODERN) 2461AC_SUBST(USE_MINGW) 2462 2463dnl =================================================================== 2464dnl The CLI/.NET language binding, and whether it can be built at all 2465dnl =================================================================== 2466dnl cli_ure, the .NET language binding. It was written in Managed 2467dnl Extensions for C++ -- __gc, S"...", __pin -- which needs /clr:oldSyntax, 2468dnl and that switch was removed after VS2015; it is now C++/CLI and builds 2469dnl with either compiler generation. 2470dnl 2471dnl It is still optional, because it wants a .NET SDK: csc.exe to compile the 2472dnl C# half and mscoree.lib to link the C++ half. --disable-cli is for a 2473dnl Windows box that has a compiler but no SDK. 2474dnl 2475dnl One variable rather than a test in each consumer: the module makefiles, 2476dnl the SDK's file lists and its checker all need the same answer, and they 2477dnl should not each rediscover it. 2478AC_ARG_ENABLE(cli, 2479[ --disable-cli Do not build the CLI (.NET) language binding. It 2480 needs a .NET SDK -- csc.exe and mscoree.lib -- which 2481 a Windows machine need not have. 2482],,) 2483DISABLE_CLI= 2484if test "$_os" != "WINNT" -o "$enable_cli" = "no" ; then 2485 DISABLE_CLI="TRUE" 2486fi 2487if test "$_os" = "WINNT" ; then 2488 AC_MSG_CHECKING([whether to build the CLI language binding]) 2489 if test -z "$DISABLE_CLI" ; then 2490 AC_MSG_RESULT([yes]) 2491 else 2492 AC_MSG_RESULT([no, --disable-cli]) 2493 fi 2494fi 2495AC_SUBST(DISABLE_CLI) 2496 2497dnl =================================================================== 2498dnl A host Python, for building the bundled one on Windows 2499dnl =================================================================== 2500dnl Python 3's PCbuild runs generator scripts under an ALREADY EXISTING 2501dnl Python. Its find_python.bat probes only "py -3.10" and "py -3.9" 2502dnl and then falls back to downloading a private copy through nuget, 2503dnl which an offline build cannot do. HOST_PYTHON is the environment 2504dnl variable that batch file checks before any of that, so naming one 2505dnl here keeps the build off the network. 2506dnl AOO_CHECK_HOST_PYTHON(candidate) 2507dnl 2508dnl Sets HOST_PYTHON to the Windows form of $1 when it is a NATIVE Windows 2509dnl Python 3.9 or newer, and leaves it empty otherwise. 2510dnl 2511dnl os.name is the whole point of the test. A cygwin Python passes the 2512dnl version check and is still the wrong tool: it reads the native paths 2513dnl PCbuild hands it -- C:\foo\bar -- as RELATIVE, and prepends its own 2514dnl working directory, so deepfreeze.py dies on a path with a drive letter 2515dnl in the middle of it. 2516AC_DEFUN([AOO_CHECK_HOST_PYTHON], [ 2517 _pycand="$1" 2518 dnl cygwin's which reports the name without the .exe that Windows needs 2519 if test -f "$_pycand.exe"; then 2520 _pycand="$_pycand.exe" 2521 fi 2522 if "$_pycand" -Ec "import os, sys; assert os.name == 'nt'; assert sys.version_info[[:2]] >= (3, 9)" >/dev/null 2>&1; then 2523 HOST_PYTHON=`cygpath -m "$_pycand"` 2524 fi 2525]) 2526 2527HOST_PYTHON= 2528if test \( "$_os" = "WINNT" \) -a \( -n "$MSVC_MODERN" \) -a \( "$SYSTEM_PYTHON" != "YES" \) ; then 2529 AC_MSG_CHECKING([for a host Python to build the bundled Python with]) 2530 if test -n "$with_host_python"; then 2531 AOO_CHECK_HOST_PYTHON([$with_host_python]) 2532 if test -z "$HOST_PYTHON"; then 2533 AC_MSG_ERROR([--with-host-python=$with_host_python is not a native Windows Python 3.9 or newer]) 2534 fi 2535 else 2536 dnl which -a, not which: cygwin's own python comes first on PATH and 2537 dnl is not usable here, so the search has to see past it. 2538 for _pypath in `which -a python3 python py 2>/dev/null`; do 2539 AOO_CHECK_HOST_PYTHON([$_pypath]) 2540 if test -n "$HOST_PYTHON"; then 2541 break 2542 fi 2543 done 2544 fi 2545 if test -z "$HOST_PYTHON"; then 2546 AC_MSG_ERROR([no Python 3.9 or newer found. PCbuild needs one to build the bundled Python; pass --with-host-python=<path to python.exe>]) 2547 fi 2548 AC_MSG_RESULT([$HOST_PYTHON]) 2549fi 2550AC_SUBST(HOST_PYTHON) 2551 2552dnl =================================================================== 2553dnl The Windows 10 SDK, for a UCRT-generation toolset 2554dnl =================================================================== 2555dnl This sits here, immediately after the compiler, rather than next to 2556dnl the Platform SDK check far below, because the SDK now supplies 2557dnl midl.exe and the Windows Installer tools -- and the .NET/midl hunt 2558dnl is only a few lines further down. 2559if test \( "$_os" = "WINNT" \) -a \( -n "$MSVC_MODERN" \) ; then 2560 dnl ===================================================================== 2561 dnl A UCRT-generation toolset is paired with the Windows 10/11 SDK, 2562 dnl whose layout is genuinely different rather than merely renamed. 2563 dnl Platform SDK v7.0 has one Include/ and one Lib/; the Windows 10 SDK 2564 dnl has FOUR include trees (ucrt, um, shared, winrt) and TWO lib trees 2565 dnl (ucrt, um) per installed version, each under a version directory. 2566 dnl So the single PSDK_HOME/Include and PSDK_HOME/Lib that set_soenv.in 2567 dnl builds by concatenation become a version plus a fixed set of 2568 dnl subdirectories -- and that version is what has to be found here. 2569 AC_MSG_CHECKING([for the Windows 10 SDK]) 2570 dnl Every candidate is judged by ONE rule: does it have Include/<ver>/um? 2571 dnl That is the only cheap thing that separates a Windows 10 SDK from the 2572 dnl old Platform SDK, which also has an Include/ and a Lib/ -- so a test 2573 dnl for those two accepts v7.0 and then fails the version scan below with 2574 dnl a message naming the right directory and the wrong reason. 2575 dnl 2576 dnl In order: what the user said, what the old option said, what the 2577 dnl registry says (oowintool knows only pre-Windows-8 keys, so this is 2578 dnl usually the Platform SDK and usually rejected here), then the two 2579 dnl documented install roots. 2580 windows_sdk_seen= 2581 WINDOWS_SDK_HOME= 2582 for windows_sdk_try in \ 2583 "$with_windows_sdk_home" \ 2584 "$with_psdk_home" \ 2585 "`$OOWINTOOL --psdk-home 2>/dev/null`" \ 2586 "/cygdrive/c/Program Files (x86)/Windows Kits/10" \ 2587 "/cygdrive/c/Program Files/Windows Kits/10" ; do 2588 test -z "$windows_sdk_try" && continue 2589 windows_sdk_try=`cygpath -u "$windows_sdk_try" 2>/dev/null || echo "$windows_sdk_try"` 2590 windows_sdk_try=`echo "$windows_sdk_try" | $SED 's:/$::'` 2591 windows_sdk_seen="$windows_sdk_seen 2592 $windows_sdk_try" 2593 if test -n "`ls -d \"$windows_sdk_try\"/Include/*/um 2>/dev/null`"; then 2594 WINDOWS_SDK_HOME="$windows_sdk_try" 2595 break 2596 fi 2597 done 2598 if test -z "$WINDOWS_SDK_HOME"; then 2599 AC_MSG_ERROR([No Windows 10 SDK found. A directory qualifies only when it has an Include/<version>/um; the old Platform SDK does not, and is not a substitute. Tried, in order:$windows_sdk_seen 2600 2601Use --with-windows-sdk-home to name one explicitly.]) 2602 fi 2603 if test -n "$with_psdk_home" -a "$WINDOWS_SDK_HOME" != "`cygpath -u \"$with_psdk_home\" 2>/dev/null`"; then 2604 AC_MSG_WARN([--with-psdk-home=$with_psdk_home is not a Windows 10 SDK; using $WINDOWS_SDK_HOME instead. It is still used for --with-frame-home purposes only if you passed it there too.]) 2605 fi 2606 2607 dnl Pick the newest COMPLETE version. Completeness matters more than it 2608 dnl sounds: bin/ routinely holds several versions while Include/ and 2609 dnl Lib/ hold one or two, so selecting on bin/ alone can pick a version 2610 dnl that has no headers at all. Compare component by component as 2611 dnl integers -- a plain string compare sorts 10.0.9xxxx above 2612 dnl 10.0.19041. 2613 if test -n "$with_windows_sdk_version"; then 2614 WINDOWS_SDK_VERSION="$with_windows_sdk_version" 2615 else 2616 windows_sdk_candidates= 2617 for sdkver in `ls "$WINDOWS_SDK_HOME/Include" 2>/dev/null`; do 2618 if test -d "$WINDOWS_SDK_HOME/Include/$sdkver/um" -a -d "$WINDOWS_SDK_HOME/Lib/$sdkver/um"; then 2619 windows_sdk_candidates="$windows_sdk_candidates $sdkver" 2620 fi 2621 done 2622 WINDOWS_SDK_VERSION=`for v in $windows_sdk_candidates; do echo $v; done | $AWK -F. '{ printf "%05d%05d%05d%05d %s\n", $1, $2, $3, $4, $0 }' | sort | tail -n 1 | $AWK '{ print $2 }'` 2623 fi 2624 if test -z "$WINDOWS_SDK_VERSION"; then 2625 AC_MSG_ERROR([No complete Windows 10 SDK found under $WINDOWS_SDK_HOME. A version counts as complete only when it has both an Include/<version>/um and a Lib/<version>/um. Use --with-windows-sdk-home and/or --with-windows-sdk-version.]) 2626 fi 2627 AC_MSG_RESULT([$WINDOWS_SDK_VERSION in $WINDOWS_SDK_HOME]) 2628 2629 dnl PSDK_HOME stays the SDK root, so everything downstream that only 2630 dnl wants a base directory keeps working. What changes is that the 2631 dnl include and lib paths are built from the version as well; that 2632 dnl happens in set_soenv.in. 2633 PSDK_HOME="$WINDOWS_SDK_HOME" 2634 2635 windows_sdk_um="$WINDOWS_SDK_HOME/Include/$WINDOWS_SDK_VERSION/um" 2636 if test ! -f "$windows_sdk_um/adoint.h" -o ! -f "$windows_sdk_um/sqlucode.h" -o ! -f "$windows_sdk_um/usp10.h"; then 2637 AC_MSG_ERROR([$windows_sdk_um is missing headers this build needs (adoint.h, sqlucode.h, usp10.h). Install the "Windows SDK for Desktop C++" component.]) 2638 fi 2639 windows_sdk_lib="$WINDOWS_SDK_HOME/Lib/$WINDOWS_SDK_VERSION" 2640 if test ! -f "$windows_sdk_lib/ucrt/x86/ucrt.lib" -a ! -f "$windows_sdk_lib/ucrt/x64/ucrt.lib"; then 2641 AC_MSG_ERROR([$windows_sdk_lib has no ucrt import library for either architecture.]) 2642 fi 2643 2644 dnl The Windows Installer tools moved into bin/<version>/<arch>. They 2645 dnl run on the build machine, so x86 is the right choice whatever is 2646 dnl being built. 2647 WINDOWS_SDK_BINDIR="$WINDOWS_SDK_HOME/bin/$WINDOWS_SDK_VERSION/x86" 2648 for sdktool in msiinfo msidb uuidgen msitran; do 2649 if test ! -x "$WINDOWS_SDK_BINDIR/$sdktool.exe"; then 2650 AC_MSG_ERROR([$sdktool.exe is missing from $WINDOWS_SDK_BINDIR. Install the "MSI Tools" SDK component.]) 2651 fi 2652 done 2653 WINDOWS_VISTA_PSDK=TRUE 2654fi 2655AC_SUBST(WINDOWS_SDK_HOME) 2656AC_SUBST(WINDOWS_SDK_VERSION) 2657AC_SUBST(WINDOWS_SDK_BINDIR) 2658 2659dnl =================================================================== 2660dnl MSBuild, for dependencies that ship Visual Studio project files 2661dnl =================================================================== 2662dnl vcbuild.exe built .vcproj files and shipped with VS2005 and VS2008 2663dnl only; VS2010 replaced it with MSBuild and changed the project format 2664dnl to .vcxproj at the same time, so this is not a renamed binary but a 2665dnl different tool reading different files. CoinMP is the one bundled 2666dnl dependency that needs it. 2667dnl 2668dnl MSBuild lives beside the toolset rather than inside it, and is not on 2669dnl PATH in a BuildTools installation, so it is looked for relative to 2670dnl --with-cl-home: <VS>/VC/Tools/MSVC/<ver> puts the VS root four levels 2671dnl up. Only searched for a UCRT-generation toolset -- VC9 uses vcbuild 2672dnl and must not be given an MSBuild it would not know what to do with. 2673MSBUILD_PATH= 2674if test "$_os" = "WINNT" -a -n "$MSVC_MODERN"; then 2675 AC_MSG_CHECKING([for MSBuild]) 2676 if test -n "$with_msbuild_path"; then 2677 MSBUILD_PATH=`cygpath -u "$with_msbuild_path"` 2678 else 2679 for msbuild_try in \ 2680 "$with_cl_home/../../../../MSBuild/Current/Bin" \ 2681 "$with_cl_home/../../../../MSBuild/15.0/Bin" ; do 2682 if test -x "$msbuild_try/MSBuild.exe"; then 2683 MSBUILD_PATH="$msbuild_try" 2684 break 2685 fi 2686 done 2687 if test -z "$MSBUILD_PATH"; then 2688 AC_PATH_PROG(MSBUILD_EXE, MSBuild.exe) 2689 if test -n "$MSBUILD_EXE"; then 2690 MSBUILD_PATH=`dirname "$MSBUILD_EXE"` 2691 fi 2692 fi 2693 fi 2694 if test -z "$MSBUILD_PATH" -o ! -x "$MSBUILD_PATH/MSBuild.exe"; then 2695 AC_MSG_ERROR([MSBuild.exe not found. It is needed to build CoinMP, whose Visual Studio projects can no longer be built by vcbuild. It is normally beside the toolset, in <VisualStudio>/MSBuild/Current/Bin; use --with-msbuild-path to name it, or --disable-coinmp to do without the Calc solver.]) 2696 fi 2697 dnl Convert to a posix path with 8.3 names, as the other tool paths are 2698 MSBUILD_PATH=`cygpath -d "$MSBUILD_PATH"` 2699 MSBUILD_PATH=`cygpath -u "$MSBUILD_PATH"` 2700 AC_MSG_RESULT([$MSBUILD_PATH]) 2701fi 2702AC_SUBST(MSBUILD_PATH) 2703 2704dnl The PlatformToolset MSBuild should retarget a project to. CoinMP's 2705dnl MSBuild projects are v10, i.e. they name toolset v100 (VS2010), which is 2706dnl not installed -- so the toolset has to be passed on the command line or 2707dnl the build fails with "the build tools for v100 cannot be found". 2708dnl 2709dnl It is derived from the toolset directory name rather than from cl's 2710dnl version, because that name IS the toolset version and needs no parsing 2711dnl of the four-part number configure builds elsewhere: 14.29.30133 is v142, 2712dnl 14.16.x is v141, 14.0x is v140, 14.3x is v143. 2713VCTOOLSET= 2714if test "$_os" = "WINNT" -a -n "$MSVC_MODERN"; then 2715 AC_MSG_CHECKING([which MSBuild PlatformToolset to use]) 2716 vctoolset_ver=`basename "$with_cl_home"` 2717 vctoolset_major=`echo "$vctoolset_ver" | cut -d. -f1` 2718 vctoolset_minor=`echo "$vctoolset_ver" | cut -d. -f2` 2719 if test -n "$vctoolset_major" -a -n "$vctoolset_minor"; then 2720 VCTOOLSET="v$vctoolset_major`expr $vctoolset_minor / 10`" 2721 fi 2722 if test -z "$VCTOOLSET"; then 2723 AC_MSG_ERROR([Could not work out a PlatformToolset from the toolset directory name "$vctoolset_ver". --with-cl-home should name the versioned toolset directory, e.g. .../VC/Tools/MSVC/14.29.30133]) 2724 fi 2725 AC_MSG_RESULT([$VCTOOLSET]) 2726fi 2727AC_SUBST(VCTOOLSET) 2728 2729dnl Compiler detection, logic from setsoenv.in 2730case "$build_os" in 2731 *cygwin*) 2732 if test "$WITH_MINGWIN" = "yes"; then 2733 COM="GCC"; 2734 else 2735 COM="MSC"; 2736 fi;; 2737 os2*) 2738 COM="GCC";; 2739 netbsd | kfreebsd* | freebsd* | linux* | darwin* ) 2740 if $CC --version 2>&1 | $GREP clang > /dev/null ; then 2741 COM="CLANG"; 2742 else 2743 COM="GCC"; 2744 fi;; 2745 solaris*) 2746 case "$CC" in 2747 *gcc*) COM="GCC";; 2748 *) COM="C52";; 2749 esac;; 2750 osf | aix*) 2751 COM="CXX";; 2752 *) AC_MSG_ERROR([Unable to decipher compiler for $build_os]);; 2753esac 2754AC_SUBST(COM) 2755 2756dnl Decode the compiler version. Logic from main/solenv/inc/tg_compv.mk. 2757case $COM in 2758 GCC) 2759 CCVER=`${CC} -dumpfullversion -dumpversion 2>&1`; 2760 CCNUMVER=`echo ${CCVER} | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2761 if test "${CCNUMVER}" -ge 000300000001; then 2762 COMID="gcc3"; 2763 COMNAME="gcc3"; 2764 elif test "${CCNUMVER}" -ge 000300000001; then 2765 COMID="GCC"; 2766 COMNAME="gcc2"; 2767 else 2768 AC_MSG_ERROR([gcc too old]); 2769 fi 2770 ;; 2771 CLANG) 2772 CCVER=`${CC} --version 2>&1 | head -n1 | sed -e"s/.*version //" -e"s/ .*//"`; 2773 CCNUMVER=`echo ${CCVER} | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2774 # The version in tg_compv.mk for darwin does not look correct 2775 # CCNUMVER = `echo ${CCVER} | sed -e"s/\.//"; 2776 case "$build_os" in 2777 darwin*) # Mac OS X 2778 COMID="s5abi"; 2779 COMNAME="s5abi"; 2780 ;; 2781 *) 2782 COMID="gcc3"; 2783 COMNAME="gcc3"; 2784 ;; 2785 esac 2786 ;; 2787 MSC) 2788 CCVER=`${CC} 2>&1 | $AWK -f ${_solenv}/bin/getcompver.awk`; 2789 CCNUMVER=`${CC} 2>&1 | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2790 if test "${CCNUMVER}" -ge 001200000000; then 2791 COMID="MSC"; 2792 case "$build_cpu" in 2793 i?86) 2794 COMNAME="msci"; 2795 ;; 2796 x86_64) 2797 if test "$BUILD_WIN64" = "TRUE" ; then 2798 COMNAME="mscx"; 2799 else 2800 COMNAME="msci"; 2801 fi 2802 ;; 2803 *) 2804 AC_MSG_ERROR([Unknown/unsupported Windows CPU $build_cpu.]) 2805 ;; 2806 esac 2807 else 2808 AC_MSG_ERROR([MSC compiler too old]); 2809 fi 2810 ;; 2811 C55 | C54 | C52 | C40 | sunpro) 2812 CCVER=`${CC} -V 2>&1 | $AWK -f ${_solenv}/bin/getcompver.awk`; 2813 CCNUMVER=`${CC} -V 2>&1 | $AWK -v num=true -f ${_solenv}/bin/getcompver.awk`; 2814 if test "${CCNUMVER}" -ge 00050002; then 2815 COMID="C52"; 2816 COMNAME="sunpro5"; 2817 else 2818 AC_MSG_ERROR([Sun compiler too old]); 2819 fi 2820 ;; 2821 *) 2822 AC_MSG_ERROR([Unable to detect compiler version]);; 2823esac 2824AC_SUBST(CCVER) 2825AC_SUBST(CCNUMVER) 2826AC_SUBST(COMID) 2827AC_SUBST(COMNAME) 2828 2829if test "$_os" = "FreeBSD"; then 2830 FBSD_GCC_RPATH= 2831 if test "$COM" = "GCC"; then 2832 rpath=`$CC --print-file-name libstdc++.so` 2833 rpath=`realpath $rpath` 2834 rpath=`dirname $rpath` 2835 if test "$rpath" != "/usr/lib" ; then 2836 FBSD_GCC_RPATH="-Wl,-rpath=$rpath" 2837 fi 2838 fi 2839 AC_SUBST(FBSD_GCC_RPATH) 2840fi 2841 2842if test "$_os" = "Linux" -o "$_os" = "FreeBSD" -o "$_os" = "GNU"; then 2843 AC_MSG_CHECKING( for --undefined-version linker support ) 2844 undefined_version_ldflags_save=$LDFLAGS 2845 LDFLAGS="$LDFLAGS -Wl,--undefined-version" 2846 AC_LINK_IFELSE([AC_LANG_PROGRAM([ 2847 #include <stdio.h> 2848 ],[ 2849 printf ("hello world\n"); 2850 ])], HAVE_LD_UNDEFINED_VERSION=TRUE, HAVE_LD_UNDEFINED_VERSION=FALSE) 2851 if test "z$HAVE_LD_UNDEFINED_VERSION" = "zTRUE"; then 2852 AC_MSG_RESULT( found ) 2853 else 2854 AC_MSG_RESULT( not found ) 2855 fi 2856 LDFLAGS=$undefined_version_ldflags_save 2857 AC_SUBST(HAVE_LD_UNDEFINED_VERSION) 2858fi 2859 2860dnl =================================================================== 2861dnl .NET needs special treatment 2862dnl =================================================================== 2863if test "$_os" = "WINNT"; then 2864if test "$WITH_MINGWIN" = "yes" || test "$COMEX" -ge "10"; then 2865 dnl Check midl.exe 2866 AC_PATH_PROG(MIDL_PATH, midl.exe) 2867 if test -n "$MIDL_PATH";then 2868 MIDL_PATH=`dirname "$MIDL_PATH"` 2869 fi 2870 if test -n "$with_midl_path";then 2871 with_midl_path=`cygpath -u "$with_midl_path"` 2872 fi 2873 if test -x "$with_midl_path/midl.exe"; then 2874 MIDL_PATH="$with_midl_path" 2875 fi 2876 if test -z "$MIDL_PATH" -a -e "$with_cl_home/../Common7/Tools/Bin/midl.exe"; then 2877 MIDL_PATH="$with_cl_home/../Common7/Tools/Bin" 2878 fi 2879 if test -z "$MIDL_PATH" ; then 2880 vstest=`$OOWINTOOL --msvs-productdir`; 2881 if test -x "$vstest/Common7/Tools/Bin/midl.exe" ; then 2882 MIDL_PATH="$vstest/Common7/Tools/Bin" 2883 fi 2884 fi 2885 if test -z "$MIDL_PATH" ; then 2886 psdktest=`$OOWINTOOL --psdk-home` 2887 if test -x "$psdktest/Bin/midl.exe" ; then 2888 MIDL_PATH="$psdktest/Bin" 2889 fi 2890 fi 2891 dnl On the Windows 10 SDK midl.exe sits with the other SDK tools in 2892 dnl bin/<version>/<arch>. This is preferred over what the searches above 2893 dnl turn up -- an AC_PATH_PROG hit from an ambient vcvars environment is 2894 dnl exactly the kind of midl/headers mismatch that surfaces much later as 2895 dnl output the compiler cannot parse -- but NOT over --with-midl-path, 2896 dnl which is the user saying which one they mean. 2897 if test -z "$with_midl_path" \ 2898 -a -n "$WINDOWS_SDK_BINDIR" -a -x "$WINDOWS_SDK_BINDIR/midl.exe" ; then 2899 MIDL_PATH="$WINDOWS_SDK_BINDIR" 2900 fi 2901 if test ! -x "$MIDL_PATH/midl.exe"; then 2902 AC_MSG_ERROR([midl.exe not found. Make sure it's in the path or use --with-midl-path]) 2903 fi 2904 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2905 MIDL_PATH=`cygpath -d "$MIDL_PATH"` 2906 MIDL_PATH=`cygpath -u "$MIDL_PATH"` 2907 2908 dnl Check csc.exe 2909 AC_PATH_PROG(CSC_PATH, csc.exe) 2910 if test -n "$CSC_PATH";then 2911 CSC_PATH=`dirname "$CSC_PATH"` 2912 fi 2913 if test -n "$with_csc_path";then 2914 with_csc_path=`cygpath -u "$with_csc_path"` 2915 fi 2916 if test -x "$with_csc_path/csc.exe"; then 2917 CSC_PATH="$with_csc_path" 2918 else 2919 csctest=`$OOWINTOOL --csc-compilerdir`; 2920 if test -x "$csctest/csc.exe"; then 2921 CSC_PATH="$csctest" 2922 fi 2923 fi 2924 dnl Which CLR the C# half must target is decided by the C++ half, and a 2925 dnl UCRT-generation compiler settles it: /clr has not emitted CLR 2 2926 dnl assemblies since VS2010. Mixing the two does not fail at build time, 2927 dnl it fails when the process loads them -- 2928 dnl 2929 dnl System.BadImageFormatException: ... The assembly was created by a 2930 dnl runtime that is newer than the currently loaded runtime 2931 dnl 2932 dnl oowintool goes looking for the v2 csc on purpose, which is right for 2933 dnl VC9 and wrong here, so take the newest compiler beside it instead. 2934 dnl This overrides an explicit --with-csc-path, because the constraint is 2935 dnl the compiler's and not a preference; hence the warning. 2936 if test -n "$MSVC_MODERN" -a -z "$DISABLE_CLI"; then 2937 AC_MSG_CHECKING([for a csc.exe matching the C++ compiler's CLR]) 2938 case "$CSC_PATH" in 2939 *[[Vv]]1.*|*[[Vv]]2.*|*[[Vv]]3.*) 2940 _csc_root=`dirname "$CSC_PATH"` 2941 _csc_new= 2942 for _c in `ls -d "$_csc_root"/[[Vv]]4* 2>/dev/null | sort -r`; do 2943 if test -x "$_c/csc.exe"; then 2944 _csc_new="$_c" 2945 break 2946 fi 2947 done 2948 if test -n "$_csc_new"; then 2949 if test -n "$with_csc_path"; then 2950 AC_MSG_WARN([--with-csc-path points at a CLR 2 compiler; using $_csc_new instead, because this C++ compiler emits CLR 4 assemblies]) 2951 fi 2952 CSC_PATH="$_csc_new" 2953 AC_MSG_RESULT([$CSC_PATH]) 2954 else 2955 AC_MSG_RESULT([none found]) 2956 AC_MSG_ERROR([This C++ compiler emits CLR 4 assemblies, but only a CLR 2 csc.exe was found. Point --with-csc-path at a v4 .NET Framework directory, or configure --disable-cli.]) 2957 fi 2958 ;; 2959 *) 2960 AC_MSG_RESULT([$CSC_PATH]) 2961 ;; 2962 esac 2963 fi 2964 if test ! -x "$CSC_PATH/csc.exe" -a -z "$DISABLE_CLI"; then 2965 AC_MSG_ERROR([csc.exe not found. Make sure it's in the path or use --with-csc-path, or configure --disable-cli]) 2966 fi 2967 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2968 CSC_PATH=`cygpath -d "$CSC_PATH"` 2969 CSC_PATH=`cygpath -u "$CSC_PATH"` 2970 2971 dnl Check mscoree.lib / .NET Frameworks dir 2972 dnl For VS2003/2005 $with_frame_home has to point to the directory with lib/mscoree.lib. 2973 AC_MSG_CHECKING(.NET Framework) 2974 if test -n "$with_frame_home"; then 2975 with_frame_home=`cygpath -u "$with_frame_home"` 2976 fi 2977 if test -f "$with_frame_home/lib/mscoree.lib"; then 2978 FRAME_HOME="$with_frame_home" 2979 fi 2980 if test -z "$FRAME_HOME" -a -e "$with_cl_home/../SDK/v1.1/lib/mscoree.lib"; then 2981 FRAME_HOME="$with_cl_home/../SDK/v1.1" 2982 fi 2983 if test -z "$FRAME_HOME" ; then 2984 frametest=`$OOWINTOOL --dotnetsdk-dir` 2985 if test -f "$frametest/lib/mscoree.lib"; then 2986 FRAME_HOME="$frametest" 2987 else 2988 frametest=`$OOWINTOOL --psdk-home` 2989 if test -f "$frametest/lib/mscoree.lib"; then 2990 FRAME_HOME="$frametest" 2991 fi 2992 fi 2993 fi 2994 if test ! -f "$FRAME_HOME/lib/mscoree.lib" -a -z "$DISABLE_CLI"; then 2995 AC_MSG_ERROR([mscoree.lib (.NET Framework) not found. Make sure you use --with-frame-home, or configure --disable-cli]) 2996 fi 2997 AC_MSG_RESULT(found) 2998 # Convert to posix path with 8.3 filename restrictions ( No spaces ) 2999 FRAME_HOME=`cygpath -d "$FRAME_HOME"` 3000 FRAME_HOME=`cygpath -u "$FRAME_HOME"` 3001fi 3002AC_SUBST(MIDL_PATH) 3003AC_SUBST(CSC_PATH) 3004AC_SUBST(FRAME_HOME) 3005fi 3006 3007dnl =================================================================== 3008dnl Check if stdc headers are available excluding Windows. 3009dnl =================================================================== 3010if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3011 AC_CHECK_INCLUDES_DEFAULT 3012AC_PROG_EGREP 3013 3014fi 3015 3016dnl =================================================================== 3017dnl Find pre-processors. 3018dnl =================================================================== 3019if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3020 AC_PROG_CXXCPP 3021 3022dnl Check whether there's a C pre-processor. 3023dnl =================================================================== 3024dnl When using SunStudio compiler, there is a bug with the cc 3025dnl preprocessor, so use CC preprocessor as the cc preprocessor 3026dnl See Issuezilla #445. 3027dnl =================================================================== 3028 if test "$_os" = "SunOS"; then 3029 CPP=$CXXCPP 3030 else 3031 AC_PROG_CPP 3032 fi 3033fi 3034 3035AC_CHECK_SIZEOF(long) 3036SIZEOF_LONG=$ac_cv_sizeof_long 3037AC_SUBST(SIZEOF_LONG) 3038AC_C_BIGENDIAN([], [], [], [:]) 3039WORDS_BIGENDIAN=$ac_cv_c_bigendian 3040AC_SUBST(WORDS_BIGENDIAN) 3041 3042dnl Check for large file support 3043AC_SYS_LARGEFILE 3044if test -n "$ac_cv_sys_file_offset_bits"; then 3045 LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" 3046fi 3047if test -n "$ac_cv_sys_large_files" && test "$ac_cv_sys_large_files" != "no"; then 3048 LFS_CFLAGS="$LFS_CFLAGS -D_LARGE_FILES" 3049fi 3050AC_SUBST(LFS_CFLAGS) 3051 3052dnl =================================================================== 3053dnl Check if valgrind.h is available 3054dnl =================================================================== 3055if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then 3056 dnl Test $prefix (currently only testing for /usr and /usr/local) 3057 dnl so that VALGRIND_CFLAGS = -I$prefix/include/valgrind 3058 VALGRIND_CFLAGS="" 3059 prev_cppflags=$CPPFLAGS 3060 if test -z "$VALGRIND_CFLAGS"; then 3061 CPPFLAGS="-I/usr/include/valgrind" 3062 AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], [unset ac_cv_header_valgrind_h]) 3063 fi 3064 if test -z "$VALGRIND_CFLAGS"; then 3065 CPPFLAGS="-I/usr/local/include/valgrind" 3066 AC_CHECK_HEADER([valgrind.h], [VALGRIND_CFLAGS=$CPPFLAGS], []) 3067 fi 3068 if test -n "$VALGRIND_CFLAGS"; then 3069 CPPFLAGS=$VALGRIND_CFLAGS 3070 AC_CHECK_HEADER([memcheck.h], [], [VALGRIND_CFLAGS=""]) 3071 fi 3072 CPPFLAGS=$prev_cppflags 3073fi 3074AC_SUBST([VALGRIND_CFLAGS]) 3075 3076dnl =================================================================== 3077dnl Check if cups/cups.h is available 3078dnl =================================================================== 3079if test "$test_cups" = "yes" -a "$ENABLE_CUPS" = "TRUE" ; then 3080 AC_CHECK_HEADER(cups/cups.h, [], 3081 [AC_MSG_ERROR([cups/cups.h could not be found. libcupsys2-dev or cups???-devel missing?])], []) 3082fi 3083 3084dnl =================================================================== 3085dnl Check if PAM/pam_appl.h is available on Linux or FreeBSD 3086dnl =================================================================== 3087if test "$_os" = "Linux" -o "$_os" = "FreeBSD" -o "$_os" = "GNU"; then 3088 AC_MSG_CHECKING([whether to enable pam support]) 3089 if test -z "$enable_pam" || test "$enable_pam" != "no"; then 3090 AC_MSG_RESULT([yes]) 3091 PAM=YES 3092 AC_CHECK_HEADER(security/pam_appl.h, [], 3093 [AC_MSG_ERROR([pam_appl.h could not be found. libpam-dev or pam-devel missing?])], []) 3094 AC_MSG_CHECKING([whether to link to libpam]) 3095 if test -n "$enable_pam_link" -a "$enable_pam_link" != "no"; then 3096 AC_MSG_RESULT([yes]) 3097 PAM_LINK=YES 3098 AC_CHECK_LIB(pam, pam_start, [], 3099 [AC_MSG_ERROR(libpam not found or functional)], []) 3100 else 3101 AC_MSG_RESULT([no, dynamically open it]) 3102 PAM_LINK=NO 3103 fi 3104 else 3105 AC_MSG_RESULT([no]) 3106 PAM=NO 3107 PAM_LINK=NO 3108 dnl check getspnam_r for needed args (4 or 5) 3109 AX_FUNC_WHICH_GETSPNAM_R 3110 fi 3111fi 3112AC_SUBST(PAM) 3113AC_SUBST(NEW_SHADOW_API) 3114AC_SUBST(PAM_LINK) 3115 3116if test "$_os" = "Linux"; then 3117 AC_MSG_CHECKING([whether to link to libcrypt]) 3118 if test -n "$enable_crypt_link" -a "$enable_crypt_link" != "no"; then 3119 AC_MSG_RESULT([yes]) 3120 CRYPT_LINK=YES 3121 AC_CHECK_LIB(crypt, crypt, [], 3122 [AC_MSG_ERROR(libcrypt not found or functional)], []) 3123 else 3124 AC_MSG_RESULT([no, dynamically open it]) 3125 CRYPT_LINK=NO 3126 fi 3127fi 3128AC_SUBST(CRYPT_LINK) 3129 3130dnl =================================================================== 3131dnl Testing for c++ compiler and version... 3132dnl =================================================================== 3133if test -n "$with_gcc_home"; then 3134 if test -z "$CXX"; then 3135 CXX="$with_gcc_home/bin/g++" 3136 fi 3137fi 3138 3139if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 3140 if test -e "$CC"; then 3141 CXX="$CC" 3142 fi 3143fi 3144 3145dnl Autoconf 2.53 can do this test for cl.exe, 2.13 can't! 3146if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then 3147 AC_PROG_CXX 3148fi 3149 3150dnl check if we are using a buggy version of g++ (currently 3.4.0, 3.4.1 and trunk) 3151if test "$GXX" = "yes"; then 3152 AC_MSG_CHECKING([the GNU C++ compiler version]) 3153 3154 _gpp_version=`$CXX -dumpversion` 3155 _gpp_majmin=`echo $_gpp_version | $AWK -F. '{ print \$1*100+\$2 }'` 3156 3157 AC_MSG_RESULT([checked (g++ $_gpp_version)]) 3158 3159 if test "$_gpp_majmin" = "304"; then 3160 AC_MSG_CHECKING([whether $CXX has the enum bug]) 3161AC_RUN_IFELSE([AC_LANG_SOURCE([[ 3162extern "C" void abort (void); 3163extern "C" void exit (int status); 3164 3165enum E { E0, E1, E2, E3, E4, E5 }; 3166 3167void 3168test (enum E e) 3169{ 3170 if (e == E2 || e == E3 || e == E1) 3171 exit (1); 3172} 3173 3174int 3175main (void) 3176{ 3177 test (E4); 3178 test (E5); 3179 test (E0); 3180 return 0; 3181} 3182]])],[AC_MSG_ERROR([your version of the GNU C++ compiler has a bug which prevents Apache OpenOffice from being compiled correctly - please check https://gcc.gnu.org/ml/gcc-patches/2004-07/msg00968.html for details.])],[AC_MSG_RESULT([no])],[]) 3183 fi 3184fi 3185 3186dnl =================================================================== 3187dnl Set the mingw runtime library include directories 3188dnl =================================================================== 3189if test "$WITH_MINGWIN" = "yes"; then 3190 AC_MSG_CHECKING([for mingwin runtime include path]) 3191 cat >conftest.$ac_ext <<_ACEOF 3192#include <stddef.h> 3193#include <bits/c++config.h> 3194_ACEOF 3195 _mingw_lib_include_path=`$CXX -E -xc++ conftest.$ac_ext | $SED -n -e '/.*1*"\(.*\)\/stddef.h".*/s//\1/p' -e '/.*1*"\(.*\)\/bits\/c++config.h".*/s//\1/p' | sort -u | xargs echo` 3196 rm conftest.$ac_ext 3197 if test -n "$_mingw_lib_include_path"; then 3198 _temp="" 3199 for a in $_mingw_lib_include_path 3200 do 3201 a=`cygpath -d "$a"` 3202 _temp="$_temp "`cygpath -u "$a"` 3203 done 3204 _mingw_lib_include_path=$_temp 3205 fi 3206 if test -z "$_mingw_lib_include_path"; then 3207 _mingw_lib_include_path="NO_LIB_INCLUDE" 3208 AC_MSG_RESULT([no mingwin runtime includes]) 3209 else 3210 AC_MSG_RESULT([$_mingw_lib_include_path]) 3211 fi 3212 MINGW_LIB_INCLUDE_PATH="$_mingw_lib_include_path" 3213 AC_SUBST(MINGW_LIB_INCLUDE_PATH) 3214dnl mingw gcc 4.4.0 needs backward in include path to use hash_set/hash_map 3215 AC_MSG_CHECKING([for mingwin c++ backward include path]) 3216 cat >conftest.$ac_ext <<_ACEOF 3217#include <hash_set> 3218_ACEOF 3219 _mingw_backward_include_path=`$CXX -E -xc++ -Wno-deprecated conftest.$ac_ext 2>&5| $SED -n -e '/.*1*"\(.*\)\/hash_set".*/s//\1/p' | sort -u | xargs echo` 3220 rm conftest.$ac_ext 3221 if test -n "$_mingw_backward_include_path"; then 3222 _mingw_backward_include_path=`cygpath -d $_mingw_backward_include_path` 3223 _mingw_backward_include_path=`cygpath -u $_mingw_backward_include_path` 3224 AC_MSG_RESULT([$_mingw_backward_include_path]) 3225 else 3226 _mingw_backward_include_path="NO_BACKWARD_INCLUDE" 3227 AC_MSG_RESULT([no mingwin c++ backward includes]) 3228 fi 3229 MINGW_BACKWARD_INCLUDE_PATH="$_mingw_backward_include_path" 3230 AC_SUBST(MINGW_BACKWARD_INCLUDE_PATH) 3231 mingw_crtbegin=`$CC -print-file-name=crtbegin.o` 3232 MINGW_CLIB_DIR=`dirname $mingw_crtbegin` 3233 AC_MSG_CHECKING([whether to use dynamic libgcc]) 3234 if test -e "$MINGW_CLIB_DIR/libgcc_s.a"; then 3235 AC_MSG_CHECKING([dynamic libgcc name]) 3236 MINGW_GCCDLL_pattern=`nm $MINGW_CLIB_DIR/libgcc_s.a | sed -ne 's@.* _libgcc\(.*\)_dll_iname@libgcc\1.dll@p' | uniq | sed -e 's@_@?@g'` 3237 MINGW_GCCDLL=`cd $COMPATH/bin && ls $MINGW_GCCDLL_pattern 2>/dev/null` 3238 if test -n "$MINGW_GCCDLL"; then 3239 MINGW_SHARED_GCCLIB=YES 3240 AC_MSG_RESULT([use $MINGW_GCCDLL]) 3241 else 3242 AC_MSG_RESULT([no]) 3243 fi 3244 else 3245 AC_MSG_RESULT([no]) 3246 fi 3247 if test -e "$MINGW_CLIB_DIR/libgcc_eh.a"; then 3248 MINGW_GCCLIB_EH=YES 3249 fi 3250 AC_MSG_CHECKING([whether to use dynamic libstdc++]) 3251 MINGW_SHARED_LIBSTDCPP= 3252 if test -e "$MINGW_CLIB_DIR/libstdc++_s.a" ; then 3253 MINGW_SHARED_LIBSTDCPP=stdc++_s 3254 fi 3255 if test -e "$MINGW_CLIB_DIR/libstdc++.dll.a" ; then 3256 MINGW_SHARED_LIBSTDCPP=stdc++.dll 3257 fi 3258 if test -n "$MINGW_SHARED_LIBSTDCPP" ; then 3259 AC_MSG_CHECKING([dynamic libstdc++ name]) 3260 MINGW_GXXDLL_pattern=`nm $MINGW_CLIB_DIR/lib$MINGW_SHARED_LIBSTDCPP.a | sed -ne 's@.* _libstdc__\(.*\)_dll_iname@libstdc++\1.dll@p' | uniq | sed -e 's@_@?@g'` 3261 MINGW_GXXDLL=`cd $COMPATH/bin && ls $MINGW_GXXDLL_pattern 2>/dev/null` 3262 if test -n "$MINGW_GXXDLL"; then 3263 MINGW_SHARED_LIBSTDCPP=-l$MINGW_SHARED_LIBSTDCPP 3264 MINGW_SHARED_GXXLIB=YES 3265 AC_MSG_RESULT([use $MINGW_GXXDLL]) 3266 else 3267 MINGW_SHARED_LIBSTDCPP= 3268 AC_MSG_RESULT([no]) 3269 fi 3270 else 3271 AC_MSG_RESULT([no]) 3272 fi 3273 MINGW_CLIB_DIR=`cygpath $MINGW_CLIB_DIR` 3274 AC_SUBST(MINGW_CLIB_DIR) 3275 AC_SUBST(MINGW_SHARED_GCCLIB) 3276 AC_SUBST(MINGW_GCCLIB_EH) 3277 AC_SUBST(MINGW_SHARED_GXXLIB) 3278 AC_SUBST(MINGW_SHARED_LIBSTDCPP) 3279 AC_SUBST(MINGW_GCCDLL) 3280 AC_SUBST(MINGW_GXXDLL) 3281fi 3282 3283dnl =================================================================== 3284dnl Extra checking for the SUN OS compiler 3285dnl =================================================================== 3286if test "$_os" = "SunOS"; then 3287 dnl SunStudio C++ compiler packaged with SunStudio C compiler 3288 if test "$CC" = "cc"; then 3289 AC_MSG_CHECKING([SunStudio C++ Compiler]) 3290 if test "$CXX" != "CC"; then 3291 AC_MSG_WARN([SunStudio C++ was not found]) 3292 echo "SunStudio C++ was not found" >> warn 3293 else 3294 AC_MSG_RESULT([checked]) 3295 fi 3296 fi 3297fi 3298dnl =================================================================== 3299dnl Extra checking for the OSF compiler 3300dnl =================================================================== 3301if test "$_os" = "OSF1"; then 3302 AC_MSG_CHECKING([Compaq C++ compiler version]) 3303 dnl cxx -V outputs to standard error!!!! 3304 _compaqcxx_version=`$CXX -V 2>&1 | $AWK '{ print $3 }'` 3305 _compaqcxx_major=`echo $_compaqcxx_version | $AWK -F. '{ print $1 }'` 3306 if test "$_compaqcxx_major" != "V6"; then 3307 AC_MSG_WARN([found version "$_compaqc_version", use version 6 of the Compaq C++ compiler]) 3308 echo "found version $_compaqc_version, use version 6 of the Compaq C++ compiler" >> warn 3309 else 3310 dnl compiler will do 3311 AC_MSG_RESULT([checked]) 3312 fi 3313fi 3314 3315dnl ************************************************************* 3316dnl Testing for exception handling - dwarf2 or sjlj exceptions... 3317dnl ************************************************************* 3318AC_MSG_CHECKING([exception type]) 3319AC_LANG_PUSH([C++]) 3320if test "$WITH_MINGWIN" = "yes"; then 3321 AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <iostream> 3322 3323extern "C" void _Unwind_SjLj_RaiseException(void) __attribute__ ((__noreturn__)); 3324 3325 ]], [[_Unwind_SjLj_RaiseException() ]])],[exceptions_type="sjlj"],[exceptions_type="dwarf2" 3326 ]) 3327fi 3328 3329AC_MSG_RESULT($exceptions_type) 3330AC_LANG_POP([C++]) 3331EXCEPTIONS="$exceptions_type" 3332AC_SUBST(EXCEPTIONS) 3333 3334dnl =================================================================== 3335dnl Checks for what the default STL should be 3336dnl =================================================================== 3337 AC_MSG_CHECKING([what the default STL should be]) 3338 DEFAULT_TO_STLPORT="no" 3339if test "$WITH_STLPORT" != "no"; then 3340 AC_MSG_ERROR([Option --with-stlport is no longer available.]) 3341else 3342 USE_SYSTEM_STL="YES" 3343fi 3344 3345AC_SUBST(USE_SYSTEM_STL) 3346 3347dnl =================================================================== 3348dnl visibility feature 3349dnl =================================================================== 3350if test "$GCC" = "yes"; then 3351 AC_MSG_CHECKING([whether $CC supports -fvisibility=hidden]) 3352 save_CFLAGS=$CFLAGS 3353 CFLAGS="$CFLAGS -fvisibility=hidden" 3354 AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_VISIBILITY_FEATURE=TRUE ],[]) 3355 CFLAGS=$save_CFLAGS 3356 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3357 AC_MSG_RESULT([yes]) 3358 else 3359 AC_MSG_RESULT([no]) 3360 fi 3361fi 3362 3363# =================================================================== 3364# use --ccache-skip? 3365# =================================================================== 3366dnl used to escape compiler options for ccache that otherwise prevent 3367dnl caching of the results (like "-x objective-c++" for Mac) 3368AC_MSG_CHECKING([whether we are allowed and able to use --ccache-skip]) 3369if test "$_os" != "Darwin" ; then 3370 AC_MSG_RESULT([only used on Mac currently, skipping]) 3371elif test "$enable_ccache_skip" = "no" ; then 3372 AC_MSG_RESULT([no - disabled explicitly]) 3373elif test "$enable_ccache_skip" = "yes" ; then 3374 AC_MSG_RESULT([yes - enabled explicitly, skipping checks]) 3375 AC_SUBST([USE_CCACHE], [YES]) 3376elif test "$enable_ccache_skip" = "auto" ; then 3377 # checking for ccache presence/version 3378 AC_MSG_RESULT([probing...]) 3379 AC_PATH_PROG([CCACHE],[ccache],[not_found]) 3380 if test "$CCACHE" = "not_found" ; then 3381 AC_MSG_NOTICE([not enabling --ccache-skip (ccache not found)]) 3382 else 3383 # check ccache version 3384 AC_MSG_CHECKING([whether version of ccache is suitable]) 3385 CCACHE_VERSION=`"$CCACHE" -V | "$AWK" '/^ccache version/{print $3}'` 3386 if test "$CCACHE_VERSION" = "2.4_OOo"; then 3387 AC_MSG_RESULT([yes]) 3388 AC_MSG_CHECKING([whether ccache is actually used for the build]) 3389 AC_LANG_PUSH([C++]) 3390 save_CXXFLAGS=$CXXFLAGS 3391 CXXFLAGS="$CXXFLAGS --ccache-skip -O2" 3392 dnl an empty program will do, we're checking the compiler flags 3393 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], 3394 [use_ccache=yes], [use_ccache=no]) 3395 if test $use_ccache = yes ; then 3396 AC_MSG_RESULT([yes, will enable --ccache-skip]) 3397 AC_SUBST([USE_CCACHE], [YES]) 3398 else 3399 AC_MSG_RESULT([no, will not enable --ccache-skip]) 3400 fi 3401 CXXFLAGS=$save_CXXFLAGS 3402 AC_LANG_POP([C++]) 3403 else 3404 AC_MSG_RESULT([no]) 3405 AC_MSG_NOTICE([ccache version $CCACHE_VERSION not accepted. See description for --enable-ccache-skip]) 3406 fi 3407 fi 3408else 3409 AC_MSG_ERROR([invalid option to --enable-ccache-skip. Valid values are "auto", "yes" and "no"]) 3410fi 3411 3412dnl =================================================================== 3413dnl system stl sanity tests 3414dnl =================================================================== 3415if false ; then # TODO: update TR1 compliant STLs 3416if test "$USE_SYSTEM_STL" = "YES"; then 3417 AC_MSG_CHECKING([system stl sanity]) 3418 AC_LANG_PUSH([C++]) 3419 3420 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3421 AC_MSG_CHECKING([if STL headers are visibility safe]) 3422 AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no) 3423 AC_MSG_RESULT([$stlvisok]) 3424 if test "$stlvisok" = "no"; then 3425 AC_MSG_WARN([Your gcc STL headers are not visibility safe. Disabling visibility]) 3426 echo "Your gcc STL headers are not visibility safe. Disabling visibility" >> warn 3427 unset HAVE_GCC_VISIBILITY_FEATURE 3428 fi 3429 fi 3430 3431 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3432 sharedlink_ldflags_save=$LDFLAGS 3433 LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden -fpic -shared" 3434 3435 AC_MSG_CHECKING([if gcc is -fvisibility-inlines-hidden safe with STL headers]) 3436 AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <sstream> 3437using namespace std; 3438]], [[istringstream strm( "test" ); return 0;]])],[$EGREP -q unresolvable conftest.err; 3439 if test $? -eq 0; then gccvisok=no; else gccvisok=yes; fi],[gccvisok=no]) 3440 AC_MSG_RESULT([$gccvisok]) 3441 if test "$gccvisok" = "no"; then 3442 AC_MSG_WARN([Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility]) 3443 echo "Your gcc is not -fvisibility-inlines-hidden safe. Disabling visibility" >> warn 3444 unset HAVE_GCC_VISIBILITY_FEATURE 3445 fi 3446 3447 LDFLAGS=$sharedlink_ldflags_save 3448 fi 3449 3450 if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then 3451 AC_MSG_CHECKING([if gcc has a visibility bug with class-level attributes (GCC bug 26905)]) 3452 cat >visibility.cxx <<_ACEOF 3453#pragma GCC visibility push(hidden) 3454struct __attribute__ ((visibility ("default"))) TestStruct { 3455 static void Init(); 3456}; 3457__attribute__ ((visibility ("default"))) void TestFunc() { 3458 TestStruct::Init(); 3459} 3460_ACEOF 3461 if ! $CXX $CXXFLAGS $CPPFLAGS -fpic -S visibility.cxx 2>/dev/null > /dev/null; then 3462 gccvisbroken=yes 3463 else 3464 case "$build_cpu" in 3465 i?86|x86_64) 3466 if $EGREP -q '@PLT' visibility.s; then 3467 gccvisbroken=no 3468 else 3469 gccvisbroken=yes 3470 fi 3471 ;; 3472 *) 3473 gccvisbroken=no 3474 ;; 3475 esac 3476 fi 3477 rm -f visibility.s visibility.cxx 3478 3479 AC_MSG_RESULT([$gccvisbroken]) 3480 if test "$gccvisbroken" = "yes"; then 3481 AC_MSG_WARN([Your gcc is not -fvisibility=hidden safe. Disabling visibility]) 3482 echo "Your gcc is not -fvisibility=hidden safe. Disabling visibility" >> warn 3483 unset HAVE_GCC_VISIBILITY_FEATURE 3484 fi 3485 fi 3486 3487 AC_LANG_POP([C++]) 3488fi 3489fi # endof TODO: update TR1 compliant STLs 3490 3491AC_SUBST(HAVE_GCC_VISIBILITY_FEATURE) 3492 3493dnl =================================================================== 3494dnl allocator 3495dnl =================================================================== 3496AC_MSG_CHECKING([which memory allocator to use]) 3497if test "$enable_jemalloc" = "yes"; then 3498 case "$_os" in 3499 Linux|Darwin) ;; 3500 *) AC_MSG_ERROR([--enable-jemalloc is only supported on Linux and macOS]) ;; 3501 esac 3502 if test -n "$with_alloc" -a "$with_alloc" != "jemalloc"; then 3503 AC_MSG_ERROR([--enable-jemalloc cannot be combined with --with-alloc=$with_alloc]) 3504 fi 3505 AC_MSG_RESULT([jemalloc (bundled)]) 3506 ALLOC="JEMALLOC" 3507 ENABLE_JEMALLOC=YES 3508 BUILD_TYPE="$BUILD_TYPE JEMALLOC" 3509 with_alloc="bundled-jemalloc" 3510fi 3511if test "$with_alloc" = "system"; then 3512 AC_MSG_RESULT([system]) 3513 ALLOC="SYS_ALLOC"; 3514 AC_CHECK_FUNCS([malloc realloc calloc free]) 3515fi 3516if test "$with_alloc" = "tcmalloc"; then 3517 AC_MSG_RESULT(tcmalloc) 3518 if ! echo $build_cpu | $GREP -E 'i[[3456]]86' 2>/dev/null >/dev/null; then 3519 AC_MSG_ERROR([tcmalloc only available/usable on ix86]) 3520 fi 3521 AC_CHECK_LIB(tcmalloc, malloc, [], 3522 [AC_MSG_ERROR(tcmalloc not found or functional. Install the Google Profiling Tools)], []) 3523 ALLOC="TCMALLOC"; 3524fi 3525if test "$with_alloc" = "jemalloc"; then 3526 if test "$_os" != "FreeBSD" -o "$_os" != "NetBSD"; then 3527 AC_MSG_RESULT(jemalloc) 3528 save_CFLAGS=$CFLAGS 3529 CFLAGS="$CFLAGS -pthread" 3530 AC_CHECK_LIB(jemalloc, malloc, [], 3531 [AC_MSG_ERROR(jemalloc not found or functional. Install the jemalloc allocator.)], []) 3532 ALLOC="JEMALLOC"; 3533 CFLAGS=$save_CFLAGS 3534 else 3535 AC_MSG_RESULT([system]) 3536 ALLOC="SYS_ALLOC"; 3537 AC_CHECK_FUNCS([malloc realloc calloc free]) 3538 fi 3539fi 3540if test "$with_alloc" = "internal" -o -z "$with_alloc"; then 3541 AC_MSG_RESULT([internal]) 3542fi 3543AC_SUBST(ALLOC) 3544AC_SUBST(ENABLE_JEMALLOC) 3545 3546dnl =================================================================== 3547dnl Custom build version 3548dnl =================================================================== 3549 3550AC_MSG_CHECKING([whether to add custom build version]) 3551if test "z$with_build_version" != "z"; then 3552 BUILD_VER_STRING=$with_build_version 3553 AC_MSG_RESULT([yes, $BUILD_VER_STRING]) 3554else 3555 BUILD_VER_STRING= 3556 AC_MSG_RESULT([no]) 3557fi 3558AC_SUBST(BUILD_VER_STRING) 3559 3560dnl =================================================================== 3561dnl Java support enable 3562dnl =================================================================== 3563AC_MSG_CHECKING([whether to build with Java support]) 3564if test "$WITH_JAVA" != "no"; then 3565 AC_MSG_RESULT([yes]) 3566 SOLAR_JAVA="TRUE" 3567else 3568 AC_MSG_RESULT([no]) 3569 SOLAR_JAVA="" 3570 3571 AC_MSG_WARN([building without java will mean some features will not be available]) 3572 echo "building without java will mean some features will not be available" >>warn 3573fi 3574AC_SUBST(SOLAR_JAVA) 3575 3576if test "$_os" = "Linux" && test "$build_cpu" = "powerpc"; then 3577 # IBMs JDK needs this... 3578 JITC_PROCESSOR_TYPE=6 3579 export JITC_PROCESSOR_TYPE 3580fi 3581 3582if test "$_os" = "WINNT"; then 3583 if test -z "$with_jdk_home"; then 3584 AC_MSG_CHECKING([for JDK home]) 3585 _jdk_home=`$OOWINTOOL --jdk-home` 3586 AC_MSG_RESULT([$_jdk_home]) 3587 if test -d "$_jdk_home"; then 3588 with_jdk_home="$_jdk_home" 3589 else 3590 AC_MSG_WARN([$_jdk_home is not a JDK home directory, ignoring it]) 3591 fi 3592 else 3593 with_jdk_home=`cygpath -u "$with_jdk_home"` 3594 fi 3595fi 3596 3597dnl on macOS there is no reliable way to derive JAVA_HOME from the path 3598dnl of the java/javac binaries (the /usr/bin/java* wrappers are no longer 3599dnl symlinks into a JDK, they are dispatcher stubs that shell out to 3600dnl /usr/libexec/java_home), so ask the system tool directly. 3601if test "$_os" = "Darwin"; then 3602 if test -z "$with_jdk_home"; then 3603 AC_MSG_CHECKING([for JDK home]) 3604 _jdk_home=`/usr/libexec/java_home 2>/dev/null` 3605 AC_MSG_RESULT([$_jdk_home]) 3606 if test -d "$_jdk_home"; then 3607 with_jdk_home="$_jdk_home" 3608 else 3609 AC_MSG_WARN([/usr/libexec/java_home did not return a JDK home directory, ignoring it]) 3610 fi 3611 fi 3612fi 3613 3614dnl =================================================================== 3615dnl Checks for java 3616dnl =================================================================== 3617if test "$SOLAR_JAVA" != ""; then 3618 JAVA_HOME=; export JAVA_HOME 3619 if test -z "$with_jdk_home"; then 3620 AC_PATH_PROG(JAVAINTERPRETER, $WITH_JAVA) 3621 else 3622 _java_path="$with_jdk_home/bin/$WITH_JAVA" 3623 dnl Check if there is a java interpreter at all. 3624 if test -x "$_java_path"; then 3625 JAVAINTERPRETER=$_java_path 3626 else 3627 AC_MSG_ERROR([$_java_path not found, please use --with-jdk-home]) 3628 fi 3629 fi 3630 if test "$_os" = "WINNT"; then 3631 if test x`echo "$JAVAINTERPRETER" | $GREP -i '\.exe$'` = x; then 3632 JAVAINTERPRETER="${JAVAINTERPRETER}.exe" 3633 fi 3634 JAVAINTERPRETER=`cygpath -d "$JAVAINTERPRETER"` 3635 JAVAINTERPRETER=`cygpath -u "$JAVAINTERPRETER"` 3636 elif test "$_os" = "Darwin"; then 3637 JAVAIFLAGS="" 3638 fi 3639fi 3640 3641dnl =================================================================== 3642dnl Checks for JDK. 3643dnl =================================================================== 3644if test "$SOLAR_JAVA" != ""; then 3645 _gij_longver=0 3646 AC_MSG_CHECKING([the installed JDK]) 3647 if test -n "$JAVAINTERPRETER"; then 3648 dnl java -version sends output to stderr! 3649 if test `$JAVAINTERPRETER -version 2>&1 | $GREP -c "Kaffe"` -gt 0; then 3650 AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in]) 3651# dnl Kaffe specific tests 3652# KAFFE_VER=`$JAVAINTERPRETER -version 2>&1 | $EGREP " Version:" | $SED -r "s/.* Version: ([[0-9\.]]*).*/\1/"` 3653# if test -z "$KAFFE_VER"; then 3654# AC_MSG_ERROR([looks like Kaffe but version detection failed]) 3655# fi 3656# _kaffe_ver=`echo "$KAFFE_VER" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3657# if test "$_kaffe_ver" -lt 10100; then 3658# AC_MSG_ERROR([Kaffe is too old ($KAFFE_VER - $_kaffe_ver), you need at least 1.1.0]) 3659# fi 3660# JDK=kaffe 3661# 3662# dnl TODO: define some project exclusion variables 3663# 3664# AC_MSG_RESULT([checked (Kaffe $KAFFE_VER)]) 3665# AC_MSG_WARN([EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile]) 3666# echo "EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to compile" >>warn 3667# JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"` 3668 elif test `$JAVAINTERPRETER --version 2>&1 | $GREP -c "GNU libgcj"` -gt 0; then 3669 JDK=gcj 3670 AC_MSG_RESULT([checked (gcj)]) 3671 _gij_version=`$JAVAINTERPRETER --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 3672 _gij_longver=`echo $_gij_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'` 3673 3674 elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | $GREP -c "BEA"` -gt 0; then 3675 AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.in]) 3676# JDK=bea 3677# 3678# dnl BEA JDK specific tests 3679# _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3680# _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3681# 3682# if test "$_jdk_ver" -lt 10500; then 3683# AC_MSG_ERROR([JDK is too old, you need at least BEA JDK 1.5.0]) 3684# fi 3685# 3686# AC_MSG_RESULT([checked (BEA JDK $_jdk)]) 3687# 3688# if test "$with_jdk_home" = ""; then 3689# AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the BEA JDK, 3690#you must use the "--with-jdk-home" configure option explicitly]) 3691# fi 3692# 3693# AC_MSG_WARN([A bug in certain BEA JREs can prevent you from successfully compiling some modules]) 3694# echo "A bug in certain BEA JREs can prevent you from successfully compiling some modules" >>warn 3695# 3696# JAVA_HOME=$with_jdk_home 3697# 3698 elif test `$JAVAINTERPRETER -version 2>&1 | awk '{ print }' | $GREP -c "IBM"` -gt 0; then 3699 JDK=ibm 3700 3701 dnl IBM JDK specific tests 3702 _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3703 _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3704 3705 if test "$_jdk_ver" -lt 10500; then 3706 AC_MSG_ERROR([IBM JDK is too old, you need at least 1.5]) 3707 fi 3708 3709 AC_MSG_RESULT([checked (IBM JDK $_jdk)]) 3710 3711 if test "$with_jdk_home" = ""; then 3712 AC_MSG_ERROR([In order to successfully build Apache OpenOffice using the IBM JDK, 3713you must use the "--with-jdk-home" configure option explicitly]) 3714 fi 3715 3716 JAVA_HOME=$with_jdk_home 3717 3718 else 3719 JDK=sun 3720 3721 dnl SUN JDK specific tests 3722 _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//` 3723 _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'` 3724 3725 if test "$_jdk_ver" -lt 10500; then 3726 AC_MSG_ERROR([JDK is too old, you need at least 1.5]) 3727 fi 3728 AC_MSG_RESULT([checked (JDK $_jdk)]) 3729 JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"` 3730 if test "$_os" = "WINNT"; then 3731 JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"` 3732 fi 3733 if test "$_os" = "OS2"; then 3734 JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"` 3735 fi 3736 fi 3737 else 3738 AC_MSG_ERROR([JAVA not found. You need at least jdk-1.5, or gcj-4]) 3739 fi 3740else 3741 dnl Java disabled 3742 JAVA_HOME=NO_JAVA_HOME ; export JAVA_HOME 3743fi 3744 3745dnl =================================================================== 3746dnl Checks for javac 3747dnl =================================================================== 3748if test "$SOLAR_JAVA" != ""; then 3749 if test "$JDK" = "gcj"; then 3750 javacompiler=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g" | $SED -e "s/java/javac/g"` 3751 else 3752 javacompiler="javac" 3753 fi 3754 if test "$_os" = "WNT" -o "$_os" = "OS2"; then 3755 if test x`echo "$javacompiler" | $GREP -i '\.exe$'` = x; then 3756 javacompiler="${javacompiler}.exe" 3757 fi 3758 fi 3759 if test -z "$with_jdk_home"; then 3760 AC_PATH_PROG(JAVACOMPILER, $javacompiler) 3761 else 3762 _javac_path="$with_jdk_home/bin/$javacompiler" 3763 dnl Check if there is a java compiler at all. 3764 if test -x "$_javac_path"; then 3765 JAVACOMPILER=$_javac_path 3766 fi 3767 fi 3768 if test -z "$JAVACOMPILER"; then 3769 AC_MSG_ERROR([$javacompiler not found, please use --with-jdk-home]) 3770 fi 3771 if test "$_os" = "WINNT"; then 3772 if test x`echo "$JAVACOMPILER" | $GREP -i '\.exe$'` = x; then 3773 JAVACOMPILER="${JAVACOMPILER}.exe" 3774 fi 3775 JAVACOMPILER=`cygpath -d "$JAVACOMPILER"` 3776 JAVACOMPILER=`cygpath -u "$JAVACOMPILER"` 3777 fi 3778 if test "$_os" = "OS2"; then 3779 if test x`echo "$JAVACOMPILER" | $GREP -i '\.exe$'` = x; then 3780 JAVACOMPILER="${JAVACOMPILER}.exe" 3781 fi 3782 fi 3783 3784 if test `$JAVACOMPILER -version 2>&1 | $GREP -c "Eclipse Java Compiler"` -gt 0; then 3785 AC_MSG_CHECKING([re-checking JDK]) 3786 JDK=gcj 3787 AC_MSG_RESULT([checked (ecj)]) 3788 #TODO: what's to do here? some switch to do 1.5 compiling? 3789 JAVAFLAGS="-source 1.5 -target 1.5" 3790 _gij_longver="40200" 3791 fi 3792fi 3793 3794JAVACISGCJ="" 3795dnl =================================================================== 3796dnl Checks that javac is gcj 3797dnl =================================================================== 3798if test "$SOLAR_JAVA" != ""; then 3799 if test `$JAVACOMPILER --version 2>&1 | $GREP -c "GCC"` -gt 0; then 3800 JAVACISGCJ="yes" 3801 fi 3802fi 3803AC_SUBST(JAVACISGCJ) 3804 3805dnl =================================================================== 3806dnl Checks for javadoc 3807dnl =================================================================== 3808if test "$SOLAR_JAVA" != ""; then 3809 if test -z "$with_jdk_home"; then 3810 AC_PATH_PROG(JAVADOC, javadoc) 3811 else 3812 _javadoc_path="$with_jdk_home/bin/javadoc" 3813 if test "$_os" = "WNT" -o "$_os" = "OS2"; then 3814 if test x`echo "$_javadoc_path" | $GREP -i '\.exe$'` = x; then 3815 _javadoc_path="${_javadoc_path}.exe" 3816 fi 3817 fi 3818 dnl Check if there is a javadoc at all. 3819 if test -x "$_javadoc_path"; then 3820 JAVADOC=$_javadoc_path 3821 else 3822 AC_PATH_PROG(JAVADOC, javadoc) 3823 fi 3824 fi 3825 if test -z "$JAVADOC"; then 3826 AC_MSG_ERROR([$_javadoc_path not found, please use --with-jdk-home]) 3827 fi 3828 if test "$_os" = "WINNT"; then 3829 if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then 3830 JAVADOC="${JAVADOC}.exe" 3831 fi 3832 JAVADOC=`cygpath -d "$JAVADOC"` 3833 JAVADOC=`cygpath -u "$JAVADOC"` 3834 fi 3835 if test "$_os" = "OS2"; then 3836 if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then 3837 JAVADOC="${JAVADOC}.exe" 3838 fi 3839 fi 3840fi 3841 3842if test "$SOLAR_JAVA" != ""; then 3843 dnl first check if we have been asked to autodetect JAVA_HOME with a recent gij 3844 if test "$JDK" = "gcj" -a -z "$JAVA_HOME"; then 3845 if test "x$with_jdk_home" = "x" -a "$_gij_longver" -ge "40200"; then 3846 cat > findhome.java <<_ACEOF 3847[import java.io.File; 3848 3849class findhome 3850{ 3851 public static void main(String args[]) 3852 { 3853 String jrelocation = System.getProperty("java.home"); 3854 File jre = new File(jrelocation); 3855 System.out.println(jre.getParent()); 3856 } 3857}] 3858_ACEOF 3859 AC_MSG_CHECKING([if javac works]) 3860 javac_cmd="$JAVACOMPILER findhome.java 1>&2" 3861 AC_TRY_EVAL(javac_cmd) 3862 if test $? = 0 && test -f ./findhome.class ; then 3863 AC_MSG_RESULT([javac works]) 3864 else 3865 echo "configure: javac test failed" >&5 3866 cat findhome.java >&5 3867 AC_MSG_ERROR([javac does not work - java projects will not build!]) 3868 fi 3869 3870 AC_MSG_CHECKING([if gij knows its java.home]) 3871 JAVA_HOME=`$JAVAINTERPRETER findhome` 3872 if test $? = 0 && test "$JAVA_HOME" != "" ; then 3873 AC_MSG_RESULT([$JAVA_HOME]) 3874 else 3875 echo "configure: java test failed" >&5 3876 cat findhome.java >&5 3877 AC_MSG_ERROR([gij does not know its java.home - use --with-jdk-home]) 3878 fi 3879 else 3880 JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*$WITH_JAVA,,p"` 3881 fi 3882 fi 3883 3884 dnl second sanity check JAVA_HOME if possible 3885 if test "$JDK" != "gcj" -o "$_gij_longver" -ge "40200"; then 3886 # check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr 3887 if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then 3888 javac_link_f=`readlink -f "$JAVACOMPILER" 2>/dev/null` 3889 if test $? == 0 && test "$JAVACOMPILER" != "$javac_link_f"; then 3890 # try to recover first by looking whether we have a alternatives 3891 # system as in Debian or newer SuSEs where following /usr/bin/javac 3892 # over /etc/alternatives/javac leads to the right bindir where we 3893 # just need to strip a bit away to get a valid JAVA_HOME 3894 # Solaris 11 is even worse, because target is relative, so use -f 3895 JAVA_HOME="$javac_link_f" 3896 elif readlink $JAVACOMPILER >/dev/null 2>/dev/null; then 3897 # Darwin readlink(1) is so primitive it doesn't even support -f 3898 # maybe only one level of symlink (e.g. on Mac) 3899 JAVA_HOME=`readlink $JAVACOMPILER` 3900 else 3901 # else warn 3902 AC_MSG_WARN([JAVA_HOME is set to /usr - this is very likely to be incorrect]) 3903 AC_MSG_WARN([if this is the case, please inform the correct JAVA_HOME with --with-jdk-home]) 3904 echo "JAVA_HOME is set to /usr - this is very likely to be incorrect" >> warn 3905 echo "if this is the case, please inform the correct JAVA_HOME with --with-jdk-home" >> warn 3906 fi 3907 dnl now that we have the path to the real javac, make a JAVA_HOME out of it.. 3908 if test "$JAVA_HOME" != "/usr"; then 3909 if test "$_os" = "Darwin"; then 3910 dnl Leopard returns a non-suitable path with readlink - points to "Current" only 3911 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/Current/Commands/javac$,/CurrentJDK/Home,) 3912 dnl Tiger already returns a JDK path.. 3913 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/CurrentJDK/Commands/javac$,/CurrentJDK/Home,) 3914 else 3915 JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/bin/javac$,,) 3916 fi 3917 fi 3918 fi 3919 # now check if $JAVA_HOME is really valid 3920 if test "$_os" = "Darwin"; then 3921 if test ! -f "$JAVA_HOME/lib/jvm.cfg" -a "x$with_jdk_home" = "x"; then 3922 JAVA_HOME_OK="NO" 3923 fi 3924 elif test ! -d "$JAVA_HOME/jre" -a "x$with_jdk_home" = "x"; then 3925 JAVA_HOME_OK="NO" 3926 fi 3927 if test "$JAVA_HOME_OK" = "NO"; then 3928 AC_MSG_WARN([JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script]) 3929 AC_MSG_WARN([attempted to find JAVA_HOME automatically, but apparently it failed]) 3930 AC_MSG_WARN([in case JAVA_HOME is incorrectly set, some projects with not be built correctly]) 3931 echo "JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script" >> warn 3932 echo "attempted to find JAVA_HOME automatically, but apparently it failed" >> warn 3933 echo "in case JAVA_HOME is incorrectly set, some projects with not be built correctly" >> warn 3934# if test "$JDK" = "gcj"; then 3935# echo "e.g. install java-1.4.2-gcj-compat-devel and use --with-jdk-home=/usr/lib/jvm/java-1.4.2-gcj" >> warn 3936# fi 3937 fi 3938 fi 3939fi 3940 3941AWTLIB= 3942if test "$SOLAR_JAVA" != ""; then 3943 AC_MSG_CHECKING([for jawt lib name]) 3944 if test "$JDK" = "gcj"; then 3945 save_CFLAGS=$CFLAGS 3946 save_LDFLAGS=$LDFLAGS 3947 CFLAGS="$CFLAGS -I$JAVA_HOME/include" 3948 LDFLAGS="$LDFLAGS -L$JAVA_HOME/lib -lgcj" 3949 exec 6>/dev/null # no output 3950 AC_CHECK_HEADER(jni.h, [], 3951 [AC_MSG_ERROR([jni.h could not be found. Mismatch between gcc and libgcj or libgcj-devel missing?])], []) 3952 AC_CHECK_LIB(gcjawt, JAWT_GetAWT, [ AWTLIB="-lgcjawt -lgcj"] ) 3953 exec 6>&1 # output on again 3954 CFLAGS=$save_CFLAGS 3955 LDFLAGS=$save_LDFLAGS 3956 fi 3957 # IBM SDK 1.5.0-sr5 includes libjawt.so with unresolved symbols. 3958 # A workaround is to link also against libpmawt.so 3959 if test "$JDK" = "ibm" ; then 3960 save_CFLAGS=$CFLAGS 3961 save_LDFLAGS=$LDFLAGS 3962 save_LD_LIBRARY_PATH=$LD_LIBRARY_PATH 3963 CFLAGS="$CFLAGS -I$JAVA_HOME/include" 3964 if test "$_os" = "Darwin"; then 3965 dnl jni_md.h lives in a platform-specific subdirectory on macOS, 3966 dnl matching the layout set up for the real build in set_soenv.in 3967 CFLAGS="$CFLAGS -I$JAVA_HOME/include/darwin" 3968 fi 3969 LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin" 3970 LD_LIBRARY_PATH=$JAVA_HOME/jre/bin:$JAVA_HOME/jre/bin/classic:$JAVA_HOME/jre/bin/xawt:$LD_LIBRARY_PATH 3971 export LD_LIBRARY_PATH 3972 exec 6>/dev/null # no output 3973 AC_CHECK_HEADER(jni.h, [], 3974 [AC_MSG_ERROR([jni.h could not be found.])], []) 3975 AC_CHECK_LIB(jawt, JAWT_GetAWT, [ AWTLIB="-ljawt"] ) 3976 if test -z "$AWTLIB"; then 3977 LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin/xawt -ljawt" 3978 AC_CHECK_LIB(mawt, JAWT_GetAWT, [ AWTLIB="-L$JAVA_HOME/jre/bin/xawt -ljawt -lmawt"]) 3979 fi 3980 exec 6>&1 # output on again 3981 CFLAGS=$save_CFLAGS 3982 LDFLAGS=$save_LDFLAGS 3983 LD_LIBRARY_PATH=$save_LD_LIBRARY_PATH 3984 fi 3985 if test -z "$AWTLIB"; then 3986 AWTLIB=-ljawt 3987 fi 3988 AC_MSG_RESULT([$AWTLIB]) 3989 AC_SUBST(AWTLIB) 3990fi 3991 3992dnl =================================================================== 3993dnl Check for optional gcj for AOT 3994dnl =================================================================== 3995if test "$SOLAR_JAVA" != ""; then 3996 AC_MSG_CHECKING([whether to enable gcj aot compilation]) 3997 if test -n "$enable_gcjaot" && test "$enable_gcjaot" != "no"; then 3998 AC_MSG_RESULT([yes]) 3999 if test `echo $WITH_JAVA | $GREP -c "gij"` -eq 0; then 4000 gcjaot="gcj" 4001 else 4002 gcjaot=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g"` 4003 fi 4004 AC_MSG_RESULT([$gcjaot]) 4005 if test -n "$with_jdk_home"; then 4006 _javac_path="$with_jdk_home/bin/$gcjaot" 4007 dnl Check if there is a gcj at all. 4008 if test -x "$_javac_path"; then 4009 JAVAAOTCOMPILER=$_javac_path 4010 fi 4011 fi 4012 if test -z "$JAVAAOTCOMPILER"; then 4013 AC_PATH_PROG(JAVAAOTCOMPILER, $gcjaot) 4014 fi 4015 if test -z "$JAVAAOTCOMPILER"; then 4016 AC_MSG_WARN([$gcjaot not found, please use --with-jdk-home]) 4017 fi 4018 else 4019 AC_MSG_RESULT([no]) 4020 fi 4021fi 4022 4023AC_SUBST(JAVA_HOME) 4024AC_SUBST(JDK) 4025AC_SUBST(JAVAFLAGS) 4026AC_SUBST(JAVAINTERPRETER) 4027AC_SUBST(JAVAIFLAGS) 4028AC_SUBST(JAVACOMPILER) 4029AC_SUBST(JAVAAOTCOMPILER) 4030AC_SUBST(JAVADOC) 4031 4032dnl =================================================================== 4033dnl Checks for specific files. 4034dnl =================================================================== 4035 4036dnl =================================================================== 4037dnl Checks for programs. 4038dnl =================================================================== 4039 4040dnl EPM is not needed for Windows, or when every requested package format is 4041dnl handled directly by the simple packager (installer/simplepackage.pm) 4042dnl rather than by EPM: "archive"/"installed" on any platform, and Darwin's 4043dnl "dmg" - including the empty default, which resolves to "dmg" on Darwin 4044dnl below. simplepackage.pm never invokes EPM for any of these three, so 4045dnl requiring EPM to be present for e.g. a plain "dmg" or "archive dmg" 4046dnl build serves no purpose. 4047need_epm_for_packaging=yes 4048if test "$_os" = "WINNT"; then 4049 need_epm_for_packaging=no 4050elif test "$with_package_format" = "archive" -o "$with_package_format" = "installed"; then 4051 need_epm_for_packaging=no 4052elif test "$_os" = "Darwin"; then 4053 need_epm_for_packaging=no 4054 for pkgformat_word in $with_package_format; do 4055 case "$pkgformat_word" in 4056 archive|installed|dmg) ;; 4057 *) need_epm_for_packaging=yes ;; 4058 esac 4059 done 4060fi 4061 4062AC_MSG_CHECKING([whether to enable EPM for packing]) 4063if test "$enable_epm" = "yes"; then 4064 AC_MSG_RESULT([yes]) 4065 dnl ================================================================================ 4066 dnl Check for epm - not needed for Windows, or when the requested package 4067 dnl format(s) are all handled without it (see need_epm_for_packaging above) 4068 dnl ================================================================================ 4069 if test "$need_epm_for_packaging" = "yes"; then 4070 if test -n "$with_epm"; then 4071 EPM=$with_epm 4072 else 4073 AC_PATH_PROG(EPM, epm, no) 4074 fi 4075 4076 # Override system epm and --with-epm if --with-epm-url is used. 4077 if test -n "$with_epm_url" ; then 4078 # At this moment we can not verify the URL or the content that we want to download. 4079 EPM_URL=$with_epm_url 4080 AC_MSG_RESULT([epm will be downloaded and compiled in bootstrap]) 4081 EPM= 4082 echo "EPM will be built." 4083 BUILD_EPM=YES 4084 BUILD_TYPE="$BUILD_TYPE EPM" 4085 else 4086 if test "$EPM" = "no" ; then 4087 AC_MSG_ERROR([no. Install ESP Package Manager (EPM) (https://jimjag.github.io/epm/) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-5.0.0 (or later) source package (--with-epm-url); run configure with the --help option for a list of possible URLs.]) 4088 else 4089 # Gentoo has some epm which is something different... 4090 AC_MSG_CHECKING([whether the found EPM is the right EPM]) 4091 if $EPM --version | $GREP "ESP Package Manager" >/dev/null 2>/dev/null; then 4092 AC_MSG_RESULT([yes]) 4093 else 4094 AC_MSG_ERROR([no. Install ESP Package Manager (https://jimjag.github.io/epm/) and/or specify the path to the right epm (--with-epm). Or specify an URL to an epm-5.0.0 (or later) source package (--with-epm-url); run configure with the --help option for a list of possible URLs.]) 4095 fi 4096 AC_MSG_CHECKING([EPM version]) 4097 EPM_VERSION=`$EPM --version | $GREP 'ESP Package Manager' | cut -d' ' -f5 | $SED -e s/v//` 4098 if test "`echo $EPM_VERSION | cut -d'.' -f1`" -ge "5"; then 4099 AC_MSG_RESULT([OK, >= 5.0]) 4100 BUILD_EPM=NO 4101 else 4102 AC_MSG_ERROR([too old. EPM >= 5.0.0 is required.]) 4103 fi 4104 fi 4105 fi 4106 fi 4107 4108 # test which package format to use 4109 AC_MSG_CHECKING([which package format to use]) 4110 4111 # defaults 4112 case "$_os" in 4113 OS2) 4114 PKGFORMAT=native 4115 ;; 4116 Darwin) 4117 PKGFORMAT=dmg 4118 ;; 4119 SunOS) 4120 PKGFORMAT=pkg 4121 ;; 4122 Linux) 4123 # if building on Debian, default should be deb... 4124 if test -e /etc/debian_version; then 4125 PKGFORMAT=deb 4126 else 4127 PKGFORMAT=rpm 4128 fi 4129 ;; 4130 AIX) 4131 PKGFORMAT=aix 4132 ;; 4133 *BSD) 4134 PKGFORMAT=bsd 4135 ;; 4136 OSF1) 4137 PKGFORMAT=setld 4138 ;; 4139 WINNT) 4140 PKGFORMAT=msi 4141 ;; 4142 # we never should get here since we check the architecture/os at the beginning, 4143 # but go sure... 4144 *) 4145 AC_MSG_ERROR([unknown system]) 4146 esac 4147 if test -n "$with_package_format"; then 4148 for i in $with_package_format; do 4149 case "$i" in 4150 aix | bsd | deb | inst | tardist | osx | pkg | rpm | setld | native | portable | archive | dmg | installed | msi) 4151 ;; 4152 *) 4153 AC_MSG_ERROR([unsupported format $i. Supported by EPM are: 4154aix - AIX software distribution 4155bsd - FreeBSD, NetBSD, or OpenBSD software distribution 4156depot or swinstall - HP-UX software distribution 4157deb - Debian software distribution 4158inst or tardist - IRIX software distribution 4159osx - MacOS X software distribution 4160pkg - Solaris software distribution 4161rpm - RedHat software distribution 4162setld - Tru64 (setld) software distribution 4163native - "Native" software distribution for the platform 4164portable - Portable software distribution 4165AOO additionally supports: 4166archive - .tar.gz or .zip 4167dmg - Mac OS X .dmg 4168installed - installation tree 4169msi - Windows .msi 4170 ]) 4171 ;; 4172 esac 4173 done 4174 PKGFORMAT="$with_package_format" 4175 fi 4176 AC_MSG_RESULT([$PKGFORMAT]) 4177 if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null; then 4178 AC_MSG_CHECKING([for rpm]) 4179 for a in "$RPM" rpmbuild rpm; do 4180 $a --usage >/dev/null 2> /dev/null 4181 if test $? -eq 0; then 4182 RPM=$a 4183 break 4184 else 4185 $a --version >/dev/null 2> /dev/null 4186 if test $? -eq 0; then 4187 RPM=$a 4188 break 4189 fi 4190 fi 4191 done 4192 if test -z "$RPM" ; then 4193 AC_MSG_ERROR([not found]) 4194 elif "$RPM" --usage 2>&1 | $EGREP -- -bb >/dev/null; then 4195 RPM_PATH=`which $RPM` 4196 AC_MSG_RESULT([$RPM_PATH]) 4197 else 4198 AC_MSG_ERROR([cannot build packages. Try installing rpmbuild.]) 4199 fi 4200 fi 4201 if echo "$PKGFORMAT" | $EGREP deb 2>&1 >/dev/null; then 4202 AC_PATH_PROG(DPKG, dpkg, no) 4203 if test "$DPKG" = "no"; then 4204 AC_MSG_ERROR([dpkg needed for deb creation. Install dpkg.]) 4205 fi 4206 AC_PATH_PROG(FAKEROOT, fakeroot, no) 4207 if test "$FAKEROOT" = "no"; then 4208 AC_MSG_ERROR([fakeroot needed for deb creation. Install fakeroot.]) 4209 fi 4210 fi 4211 if echo "$PKGFORMAT" | $EGREP osx 2>&1 >/dev/null; then 4212 if test "$_os" = "Darwin"; then 4213 AC_MSG_CHECKING([for PackageMaker availability]) 4214 if ! test -x /Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker; then 4215 AC_MSG_ERROR([not installed. Apple's PackageMaker does not exist on 4216current Xcode; the "osx" EPM format is obsolete on this platform - use "dmg" 4217instead, or see MACOS_PACKAGING_EPM_REVIEW.md for a modern product-PKG path.]) 4218 else 4219 AC_MSG_RESULT([ok]) 4220 fi 4221 else 4222 AC_MSG_ERROR([PackageMaker needed to build OSX packages and you are not on OSX...]) 4223 fi 4224 fi 4225 if echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then 4226 AC_PATH_PROG(PKGMK, pkgmk, no) 4227 if test "$PKGMK" = "no"; then 4228 AC_MSG_ERROR([pkgmk needed for Solaris pkg creation. Install it.]) 4229 fi 4230 fi 4231 AC_SUBST(RPM) 4232 AC_SUBST(DPKG) 4233 AC_SUBST(FAKEROOT) 4234 AC_SUBST(PKGMK) 4235else 4236 AC_MSG_RESULT([no]) 4237 BUILD_EPM=NO 4238 EPM=NO 4239 if test "$_os" = "Darwin" -a "$need_epm_for_packaging" = "no"; then 4240 dnl simplepackage.pm builds archive/installed/dmg without EPM, so 4241 dnl --disable-epm should not discard a requested "dmg" (or Darwin's 4242 dnl "dmg" default) the way it must for a format that does need EPM. 4243 PKGFORMAT=dmg 4244 test -z "$with_package_format" || PKGFORMAT="$with_package_format" 4245 else 4246 PKGFORMAT=native 4247 fi 4248fi 4249AC_SUBST(BUILD_EPM) 4250AC_SUBST(EPM_URL) 4251AC_SUBST(EPM) 4252AC_SUBST(PKGFORMAT) 4253 4254dnl =================================================================== 4255dnl Check for gperf 4256dnl =================================================================== 4257AC_PATH_PROG(GPERF, gperf) 4258if test -z "$with_gperf"; then 4259 AC_PATH_PROG(GPERF, gperf) 4260 if test -z "$GPERF"; then 4261 AC_MSG_ERROR([gperf not found but needed. Install it and/or specify --with-gperf=/path/to/it.]) 4262 fi 4263else 4264 if test -x "$with_gperf"; then 4265 GPERF=$with_gperf 4266 else 4267 AC_MSG_ERROR([--with-gperf did not point to an executable]) 4268 fi 4269fi 4270AC_MSG_CHECKING([gperf version]) 4271if test "`$GPERF --version | $EGREP ^GNU\ gperf | $AWK '{ print $3 }' | cut -d. -f1`" -ge "3"; then 4272 AC_MSG_RESULT([OK]) 4273 GPERF=$GPERF 4274else 4275 AC_MSG_ERROR([too old, you need at least 3.0.0]) 4276fi 4277AC_SUBST(GPERF) 4278 4279dnl =================================================================== 4280dnl Check for building ODK 4281dnl =================================================================== 4282AC_MSG_CHECKING([whether to build the ODK]) 4283if test "z$enable_odk" = "z" -o "$enable_odk" != "no"; then 4284 AC_MSG_RESULT([yes]) 4285 if test "$WITH_JAVA" != "no"; then 4286 AC_MSG_CHECKING([for external/unowinreg/unowinreg.dll]) 4287 if ! test -f "./external/unowinreg/unowinreg.dll"; then 4288 HAVE_UNOWINREG_DLL=no 4289 else 4290 HAVE_UNOWINREG_DLL=yes 4291 fi 4292 if test "$HAVE_UNOWINREG_DLL" = "yes"; then 4293 AC_MSG_RESULT([found]) 4294 BUILD_UNOWINREG=NO 4295 else 4296 if test "$_os" = "WINNT"; then 4297 AC_MSG_RESULT([not found, will be built]) 4298 else 4299 AC_MSG_WARN([not found, will be cross-built using mingw32]) 4300 fi 4301 BUILD_UNOWINREG=YES 4302 fi 4303 if test "$_os" != "WINNT" && test "$BUILD_UNOWINREG" = "YES"; then 4304 if test -z "$WITH_MINGWIN" || test "$WITH_MINGWIN" = "0"; then 4305 AC_MSG_ERROR([for rebuilding unowinreg.dll you need the mingw32 C++ compiler. 4306 Specify mingw32 g++ executable name with --with-mingwin. 4307 Or use prebuilt one from https://tools.openoffice.org/unowinreg_prebuild/680/ and 4308 put it into external/unowinreg using your browser or a command equivalent to: 4309 wget -O external/unowinreg/unowinreg.dll https://www.openoffice.org/tools/unowinreg_prebuild/680/unowinreg.dll]) 4310 fi 4311 if echo "$WITH_MINGWIN" | $EGREP -q "/"; then 4312 if ! test -x "$WITH_MINGWIN"; then MINGWCXX=false; else MINGWCXX=`basename $WITH_MINGWIN`; fi 4313 else 4314 AC_CHECK_TOOL(MINGWCXX, $WITH_MINGWIN, false) 4315 fi 4316 if test "$MINGWCXX" = "false"; then 4317 AC_MSG_ERROR(specified MinGW32 C++ cross-compiler not found. Install it or correct name.) 4318 fi 4319 AC_MSG_CHECKING(whether we are using the MinGW32 cross C++ compiler) 4320 if ! echo "`$MINGWCXX -dumpmachine`" | $GREP -q mingw32; then 4321 AC_MSG_ERROR(no) 4322 else 4323 AC_MSG_RESULT(yes) 4324 fi 4325 if echo "$WITH_MINGWIN" | $EGREP -q "/"; then 4326 if ! test -x "`echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`"; then MINGWSTRIP=false; else MINGWSTRIP=$(basename $(echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/)); fi 4327 else 4328 AC_CHECK_TOOL(MINGWSTRIP, `echo $WITH_MINGWIN | $SED -e s/g++/strip/ | $SED -e s/c++/strip/`, false) 4329 fi 4330 if test "$MINGWSTRIP" = "false"; then 4331 AC_MSG_ERROR(MinGW32 binutils needed. Install them.) 4332 fi 4333 AC_LANG_PUSH([C++]) 4334 save_CXX=$CXX 4335 save_CXXCPP=$CXXCPP 4336 CXX=$MINGWCXX 4337 CXXCPP="$MINGWCXX -E" 4338 save_CXXFLAGS=$CXXFLAGS 4339 save_CPPFLAGS=$CPPFLAGS 4340 CXXFLAGS="$CXXFLAGS -I$JAVA_HOME/include" 4341 CPPFLAGS="$CPPFLAGS -I$JAVA_HOME/include" 4342 # LIBS contains -lcrypt etc due to the AC_CHECK_LIBS which obviously 4343 # do not make sense here (and 'd make the check fail) 4344 save_LIBS=$LIBS 4345 LIBS="" 4346 AC_CHECK_LIB([kernel32],[main],[],[],[])ac_cv_lib_kernel32=ac_cv_lib_kernel32_main 4347 4348 AC_CHECK_LIB([advapi32],[main],[],[],[])ac_cv_lib_advapi32=ac_cv_lib_advapi32_main 4349 4350 AC_CHECK_HEADER(windows.h, [], [AC_MSG_ERROR([windows.h missing])]) 4351 CXXFLAGS=$save_CXXFLAGS 4352 CPPFLAGS=$save_CPPFLAGS 4353 CXX=$save_CXX 4354 CXXCPP=$save_CXXCPP 4355 LIBS=$save_LIBS 4356 AC_LANG_POP([C++]) 4357 fi 4358 fi 4359 BUILD_TYPE="$BUILD_TYPE ODK" 4360else 4361 AC_MSG_RESULT([no]) 4362 BUILD_UNOWINREG=NO 4363fi 4364AC_SUBST(BUILD_UNOWINREG) 4365AC_SUBST(MINGWCXX) 4366AC_SUBST(MINGWSTRIP) 4367 4368dnl =================================================================== 4369dnl Check for system stdlibs 4370dnl =================================================================== 4371AC_MSG_CHECKING([whether to provide libstdc++/libgcc_s in the installset]) 4372if test -n "$with_system_stdlibs" -o -n "$with_system_libs" && \ 4373 test "$with_system_stdlibs" != "no"; then 4374 AC_MSG_RESULT([no]) 4375 SYSTEM_STDLIBS=YES 4376else 4377 AC_MSG_RESULT([yes]) 4378 SYSTEM_STDLIBS=NO 4379fi 4380AC_SUBST(SYSTEM_STDLIBS) 4381 4382dnl =================================================================== 4383dnl Check for system zlib 4384dnl =================================================================== 4385if test "$_os" = "Darwin" && test "$with_system_zlib" != "no"; then 4386 with_system_zlib=yes 4387fi 4388AC_MSG_CHECKING([which zlib to use]) 4389if test -n "$with_system_zlib" -o -n "$with_system_libs" && \ 4390 test "$with_system_zlib" != "no"; then 4391 AC_MSG_RESULT([external]) 4392 SYSTEM_ZLIB=YES 4393 AC_CHECK_HEADER(zlib.h, [], 4394 [AC_MSG_ERROR(zlib.h not found. install zlib)], []) 4395 AC_CHECK_LIB(z, deflate, [ ZLIB=-lz ], 4396 [AC_MSG_ERROR(zlib not found or functional)], []) 4397else 4398 AC_MSG_RESULT([internal]) 4399 SYSTEM_ZLIB=NO 4400 BUILD_TYPE="$BUILD_TYPE ZLIB" 4401fi 4402AC_SUBST(SYSTEM_ZLIB) 4403 4404dnl =================================================================== 4405dnl Check for system jpeg 4406dnl =================================================================== 4407AC_MSG_CHECKING([which jpeg to use]) 4408if test -n "$with_system_jpeg" -o -n "$with_system_libs" && \ 4409 test "$with_system_jpeg" != "no"; then 4410 AC_MSG_RESULT([external]) 4411 SYSTEM_JPEG=YES 4412 AC_CHECK_HEADER(jpeglib.h, [], 4413 [AC_MSG_ERROR(jpeg.h not found. install libjpeg)], []) 4414 AC_CHECK_LIB(jpeg, jpeg_resync_to_restart, [ JPEG3RDLIB=-ljpeg ], 4415 [AC_MSG_CHECKING(jpeg library not found or functional)], []) 4416else 4417 AC_MSG_RESULT([internal]) 4418 SYSTEM_JPEG=NO 4419 BUILD_TYPE="$BUILD_TYPE JPEG" 4420fi 4421AC_SUBST(SYSTEM_JPEG) 4422 4423dnl =================================================================== 4424dnl Check for system expat 4425dnl =================================================================== 4426AC_MSG_CHECKING([which expat to use]) 4427if test -n "$with_system_expat" -o -n "$with_system_libs" && \ 4428 test "$with_system_expat" != "no"; then 4429 AC_MSG_RESULT([external]) 4430 SYSTEM_EXPAT=YES 4431 AC_CHECK_HEADER(expat.h, [], 4432 [AC_MSG_ERROR(expat.h not found. install expat)], []) 4433 AC_CHECK_LIB(expat, XML_ParserCreate, [], 4434 [AC_MSG_RESULT(expat library not found or functional.)], []) 4435else 4436 AC_MSG_RESULT([internal]) 4437 SYSTEM_EXPAT=NO 4438 BUILD_TYPE="$BUILD_TYPE EXPAT" 4439fi 4440AC_SUBST(SYSTEM_EXPAT) 4441 4442dnl =================================================================== 4443dnl Check whether freetype is available 4444dnl =================================================================== 4445if test "$test_freetype" = "yes"; then 4446 AC_MSG_CHECKING([whether freetype is available]) 4447 PKG_CHECK_MODULES( FREETYPE, freetype2 >= 2.0 ) 4448fi 4449AC_SUBST(FREETYPE_CFLAGS) 4450AC_SUBST(FREETYPE_LIBS) 4451 4452dnl =================================================================== 4453dnl Check whether freetype2 supports emboldening 4454dnl =================================================================== 4455if test "$test_freetype" = "yes"; then 4456 save_CPPFLAGS="$CPPFLAGS" 4457 save_LDFLAGS="$LDFLAGS" 4458 save_LIBS="$LIBS" 4459 CPPFLAGS="$CPPFLAGS $FREETYPE_CFLAGS" 4460 LDFLAGS="$LDFLAGS $FREETYPE_LIBS" 4461 AC_CHECK_LIB(freetype, FT_GlyphSlot_Embolden, 4462 [USE_FT_EMBOLDEN="YES"], [USE_FT_EMBOLDEN="NO"], []) 4463 LDFLAGS="$save_LDFLAGS" 4464 CPPFLAGS="$save_CPPFLAGS" 4465 LIBS="$save_LIBS" 4466fi 4467AC_SUBST(USE_FT_EMBOLDEN) 4468 4469if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \ 4470 test "$with_system_libxslt" != "no"; then 4471 if test -z "$with_system_libxml" -a -z "$with_system_libs" || \ 4472 test "$with_system_libxml" = "no"; then 4473 # somehow AC_MSG_WARN won't work... 4474 echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml" 4475 echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be build with system-libxml" >> warn 4476 with_system_libxml=yes 4477 fi 4478fi 4479if test -n "$with_system_libxml" -o -n "$with_system_libs" && \ 4480 test "$with_system_libxml" != "no"; then 4481 if test -z "$with_system_libxslt" -a -z "$with_system_libs" || \ 4482 test "$with_system_libxslt" = "no"; then 4483 # somehow AC_MSG_WARN won't work... 4484 echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt" 4485 echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be build with system-libxslt" >> warn 4486 with_system_libxslt=yes 4487 fi 4488fi 4489 4490dnl =================================================================== 4491dnl Check for system libxslt 4492dnl =================================================================== 4493AC_MSG_CHECKING([which libxslt to use]) 4494if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \ 4495 test "$with_system_libxslt" != "no"; then 4496 AC_MSG_RESULT([external]) 4497 SYSTEM_LIBXSLT=YES 4498 4499 if test "$_os" != "Darwin"; then 4500 PKG_CHECK_MODULES(LIBXSLT, libxslt) 4501 else 4502 dnl See the matching libxml check below for why this pins 4503 dnl xslt-config to the directory given to --with-system-libxslt 4504 dnl instead of resolving a bare "xslt-config" off PATH. 4505 if test "$with_system_libxslt" != "yes" -a -n "$with_system_libxslt"; then 4506 XSLT_CONFIG="$with_system_libxslt/bin/xslt-config" 4507 if test ! -x "$XSLT_CONFIG"; then 4508 AC_MSG_ERROR([--with-system-libxslt=$with_system_libxslt given, but $XSLT_CONFIG not found or not executable]) 4509 fi 4510 else 4511 AC_PATH_PROG(XSLT_CONFIG, xslt-config, []) 4512 if test -z "$XSLT_CONFIG"; then 4513 AC_MSG_ERROR([xslt-config not found on PATH]) 4514 fi 4515 fi 4516 LIBXSLT_CFLAGS=`$XSLT_CONFIG --cflags` 4517 LIBXSLT_LIBS=`$XSLT_CONFIG --libs` 4518 LIBXSLT_PREFIX=`$XSLT_CONFIG --prefix` 4519 fi 4520 4521 dnl Check for xsltproc 4522 AC_PATH_PROG(XSLTPROC, xsltproc, no) 4523 if test "$XSLTPROC" = "no"; then 4524 AC_MSG_ERROR([xsltproc is required]) 4525 fi 4526else 4527 AC_MSG_RESULT([internal]) 4528 SYSTEM_LIBXSLT=NO 4529 BUILD_TYPE="$BUILD_TYPE LIBXSLT" 4530fi 4531AC_SUBST(SYSTEM_LIBXSLT) 4532AC_SUBST(LIBXSLT_CFLAGS) 4533AC_SUBST(LIBXSLT_LIBS) 4534AC_SUBST(LIBXSLT_PREFIX) 4535 4536 4537dnl =================================================================== 4538dnl Check for system libxml 4539dnl =================================================================== 4540AC_MSG_CHECKING([which libxml to use]) 4541if test -n "$with_system_libxml" -o -n "$with_system_libs" && \ 4542 test "$with_system_libxml" != "no"; then 4543 AC_MSG_RESULT([external]) 4544 SYSTEM_LIBXML=YES 4545 BUILD_TYPE="$BUILD_TYPE LIBXMLSEC" 4546 4547 if test "$_os" != "Darwin"; then 4548 PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.0) 4549 else 4550 dnl A bare "xml2-config" resolves off whatever happens to be 4551 dnl first on PATH, which is ambiguous when several package 4552 dnl managers each ship their own libxml2 (MacPorts, Homebrew, 4553 dnl a hand-built static copy, ...). When --with-system-libxml 4554 dnl is given an actual directory (not just a bare "yes"), pin 4555 dnl xml2-config to that prefix explicitly so the intended copy 4556 dnl can't be shadowed by PATH order. 4557 if test "$with_system_libxml" != "yes" -a -n "$with_system_libxml"; then 4558 XML2_CONFIG="$with_system_libxml/bin/xml2-config" 4559 if test ! -x "$XML2_CONFIG"; then 4560 AC_MSG_ERROR([--with-system-libxml=$with_system_libxml given, but $XML2_CONFIG not found or not executable]) 4561 fi 4562 else 4563 AC_PATH_PROG(XML2_CONFIG, xml2-config, []) 4564 if test -z "$XML2_CONFIG"; then 4565 AC_MSG_ERROR([xml2-config not found on PATH]) 4566 fi 4567 fi 4568 LIBXML_CFLAGS=`$XML2_CONFIG --cflags` 4569 LIBXML_LIBS=`$XML2_CONFIG --libs` 4570 LIBXML_PREFIX=`$XML2_CONFIG --prefix` 4571 fi 4572else 4573 AC_MSG_RESULT([internal]) 4574 SYSTEM_LIBXML=NO 4575 BUILD_TYPE="$BUILD_TYPE LIBXML2 LIBXMLSEC" 4576fi 4577AC_SUBST(SYSTEM_LIBXML) 4578AC_SUBST(SYSTEM_LIBXML_STATIC) 4579AC_SUBST(LIBXML_CFLAGS) 4580AC_SUBST(LIBXML_LIBS) 4581AC_SUBST(LIBXML_PREFIX) 4582 4583 4584dnl =================================================================== 4585dnl Checks for a MacOS platform SDK compatible with deployment target 4586dnl =================================================================== 4587if test "$_os" = "Darwin"; then 4588 sdk_target=$with_macosx_target 4589 AC_MSG_CHECKING([checking SDK compatibility with OSX $sdk_target]) 4590 4591 sdk_major=`echo $sdk_target | cut -d"." -f1` 4592 sdk_minor=`echo $sdk_target | cut -d"." -f2` 4593 test -z "$sdk_minor" && sdk_minor=0 4594 4595 dnl Minimum supported macOS deployment target is 11.0 (Big Sur). This is 4596 dnl also the hard floor for Apple Silicon (arm64), so enforce it for every 4597 dnl architecture. 4598 if test "$sdk_major" -lt "11" ; then 4599 AC_MSG_ERROR([macOS deployment target < 11.0 is no longer supported; use --with-macosx-target=11.0 or later]) 4600 else 4601 MACOSX_DEPLOYMENT_TARGET=$sdk_target 4602 sdk_path=$with_macosx_sdk 4603 if test -z "$sdk_path"; then 4604 dnl --macosx-sdk not used (or blank): We look for the SDK. 4605 dnl Prefer xcodebuild when full Xcode is installed, but fall back 4606 dnl to xcrun so that Command Line Tools-only setups also work 4607 dnl (xcodebuild is unavailable without the full Xcode app). 4608 sdk_found=`xcodebuild -showsdks 2>/dev/null | $EGREP "sdk macosx(1[1-9]|[2-9][0-9])" | sed -e "s/.*sdk //" | tail -n1` 4609 if test -n "$sdk_found"; then 4610 AC_MSG_RESULT([yes, by using SDK $sdk_found]) 4611 sdk_path=`xcodebuild -version -sdk ${sdk_found} Path` 4612 else 4613 sdk_path=`xcrun --sdk macosx --show-sdk-path 2>/dev/null` 4614 if test -z "$sdk_path"; then 4615 AC_MSG_ERROR([No SDK with OSX $sdk_target compatibility found]) 4616 fi 4617 AC_MSG_RESULT([yes, by using SDK at $sdk_path]) 4618 fi 4619 elif test ! -d "$sdk_path"; then 4620 dnl --macosx-sdk=<version> given (not a path): resolve it. Prefer 4621 dnl xcodebuild, but fall back to xcrun so Command Line Tools-only 4622 dnl setups (no full Xcode) also work. 4623 sdk_found=`xcodebuild -showsdks 2>/dev/null | $EGREP "sdk macosx${sdk_path}" | sed -e "s/.*sdk //" | tail -n1` 4624 if test -n "$sdk_found"; then 4625 AC_MSG_RESULT([SDK $sdk_found]) 4626 sdk_path=`xcodebuild -version -sdk ${sdk_found} Path` 4627 else 4628 sdk_xcrun=`xcrun --sdk macosx${sdk_path} --show-sdk-path 2>/dev/null` 4629 if test -z "$sdk_xcrun"; then 4630 AC_MSG_ERROR([SDK macosx${sdk_path} not found]) 4631 fi 4632 AC_MSG_RESULT([SDK at $sdk_xcrun]) 4633 sdk_path=$sdk_xcrun 4634 fi 4635 fi 4636 AC_MSG_CHECKING([for $sdk_path]) 4637 if test -d "$sdk_path"; then 4638 AC_MSG_RESULT([yes]) 4639 else 4640 AC_MSG_ERROR([not found!]) 4641 fi 4642 4643 MACOSX_SDK_PATH=$sdk_path 4644 SDKROOT=$sdk_path 4645 export SDKROOT 4646 fi 4647 4648fi 4649dnl Code signing during packaging: solenv/bin/modules/installer/simplepackage.pm 4650dnl reads these from the environment (via set_soenv), so a bare "yes" is an error. 4651MACOSX_CODESIGNING_IDENTITY= 4652MACOSX_CODESIGNING_KEYCHAIN= 4653MACOSX_NOTARY_PROFILE= 4654if test "$with_macosx_codesigning_identity" = "yes"; then 4655 AC_MSG_ERROR([--with-macosx-codesigning-identity needs a codesign identity, or "-" for ad-hoc]) 4656fi 4657if test -n "$with_macosx_codesigning_identity" -a "$with_macosx_codesigning_identity" != "no"; then 4658 MACOSX_CODESIGNING_IDENTITY=$with_macosx_codesigning_identity 4659fi 4660if test -n "$with_macosx_codesigning_keychain" -a "$with_macosx_codesigning_keychain" != "no" -a "$with_macosx_codesigning_keychain" != "yes"; then 4661 MACOSX_CODESIGNING_KEYCHAIN=$with_macosx_codesigning_keychain 4662fi 4663if test "$with_macosx_notary_profile" = "yes"; then 4664 AC_MSG_ERROR([--with-macosx-notary-profile needs a notarytool keychain profile name]) 4665fi 4666if test -n "$with_macosx_notary_profile" -a "$with_macosx_notary_profile" != "no"; then 4667 if test "$MACOSX_CODESIGNING_IDENTITY" = "" -o "$MACOSX_CODESIGNING_IDENTITY" = "-"; then 4668 AC_MSG_ERROR([--with-macosx-notary-profile needs --with-macosx-codesigning-identity set to a real Developer ID identity, not ad-hoc]) 4669 fi 4670 MACOSX_NOTARY_PROFILE=$with_macosx_notary_profile 4671fi 4672AC_SUBST(MACOSX_DEPLOYMENT_TARGET) 4673AC_SUBST(MACOSX_SDK_PATH) 4674AC_SUBST(SDKROOT) 4675AC_SUBST(MACOSX_CODESIGNING_IDENTITY) 4676AC_SUBST(MACOSX_CODESIGNING_KEYCHAIN) 4677AC_SUBST(MACOSX_NOTARY_PROFILE) 4678 4679 4680dnl =================================================================== 4681dnl Check for system python 4682dnl =================================================================== 4683AC_MSG_CHECKING([which python to use]) 4684if test "$_os" = "Darwin" && \ 4685 test -n "$with_system_python" -o -n "$with_system_libs" && \ 4686 test "$with_system_python" != "no"; then 4687 with_system_python=yes 4688 4689 dnl Recent macOS releases no longer ship a usable Python under /usr/bin, 4690 dnl and even when python3 exists there it may be Apple's old CLT stub 4691 dnl (< 3.11). Probe the locations where a system/user Python is typically 4692 dnl found - the python.org framework build, Homebrew (Apple Silicon and 4693 dnl Intel), and whatever python3 is first on PATH (MacPorts/pyenv/etc.) - 4694 dnl and pick the first candidate that actually satisfies the 3.11 floor. 4695 dnl hex version of Python 3.11.0 = 51118080 4696 _python="" 4697 for _python_candidate in \ 4698 "/Library/Frameworks/Python.framework/Versions/Current/bin/python3" \ 4699 "/Library/Frameworks/Python.framework/Versions/Current/bin/python" \ 4700 "/opt/homebrew/bin/python3" \ 4701 "/usr/local/bin/python3" \ 4702 `command -v python3 2>/dev/null` \ 4703 "/usr/bin/python3" \ 4704 "/usr/bin/python" ; do 4705 if test -x "$_python_candidate"; then 4706 _python_candidate_hexversion=`$_python_candidate -c "import sys; print(sys.hexversion)" 2>/dev/null` 4707 if test -n "$_python_candidate_hexversion" && \ 4708 test "$_python_candidate_hexversion" -ge 51118080 2>/dev/null; then 4709 _python="$_python_candidate" 4710 break 4711 fi 4712 fi 4713 done 4714 if test -z "$_python"; then 4715 AC_MSG_ERROR([Python 3.11 or higher is required; install it (e.g. from python.org or Homebrew), or configure with --without-system-python]) 4716 fi 4717 4718 _python_version=`$_python -c "import sys; print(sys.version);" | head -c 4` 4719 AC_MSG_RESULT([compiling against system python ($_python, version $_python_version)]) 4720 4721 dnl Hand the interpreter we just validated to the build, so that the build 4722 dnl steps that run Python scripts use it instead of whatever "python3" 4723 dnl happens to be first on PATH. 4724 PYTHON_BIN="$_python" 4725 4726 _python_ver=`$_python -c "import sysconfig; print(sysconfig.get_config_var('VERSION'));"` 4727 4728 dnl Locate the headers. Prefer the framework/SDK locations, but fall back 4729 dnl to whatever include dir the interpreter itself reports (this is what 4730 dnl makes Homebrew and other non-framework installs work). 4731 if test -d "/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"; then 4732 PYTHON_CFLAGS="-I/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver" 4733 elif test -d "$MACOSX_SDK_PATH/usr/include/python$_python_ver"; then 4734 PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/usr/include/python$_python_ver" 4735 elif test -d "$MACOSX_SDK_PATH/System/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver"; then 4736 PYTHON_CFLAGS="-I$MACOSX_SDK_PATH/System/Library/Frameworks/Python.framework/Versions/$_python_ver/include/python$_python_ver" 4737 else 4738 _python_inc=`$_python -c "import sysconfig; print(sysconfig.get_path('include'));"` 4739 PYTHON_CFLAGS="-I$_python_inc" 4740 fi 4741 4742 dnl A framework build links against the Python framework; any other 4743 dnl install (Homebrew, etc.) links against libpython in its LIBDIR. 4744 case "$_python" in 4745 /Library/Frameworks/Python.framework/*|*/System/Library/Frameworks/Python.framework/*) 4746 PYTHON_LIBS="-framework Python" 4747 ;; 4748 *) 4749 dnl Use sysconfig, not distutils.sysconfig: distutils was removed in 4750 dnl Python 3.12 and the interpreter we pick here may well be newer 4751 dnl than the 3.11 floor. 4752 _python_libdir=`$_python -c "import sysconfig; print(sysconfig.get_config_var('LIBDIR'));"` 4753 PYTHON_LIBS="-L$_python_libdir -lpython$_python_ver" 4754 ;; 4755 esac 4756elif test -n "$with_system_python" -o -n "$with_system_libs" && \ 4757 test "$with_system_python" != "no"; then 4758 with_system_python=yes 4759 AC_MSG_RESULT([external]) 4760 AM_PATH_PYTHON([3.11]) 4761 4762 dnl Hand the interpreter AM_PATH_PYTHON just validated to the build, so that 4763 dnl the build steps that run Python scripts use it instead of whatever 4764 dnl "python3" happens to be first on PATH. 4765 PYTHON_BIN="$PYTHON" 4766 4767 python_include=`$PYTHON -c "import sysconfig; print(sysconfig.get_config_var('INCLUDEPY'));"` 4768 python_version=`$PYTHON -c "import sysconfig; print(sysconfig.get_config_var('VERSION'));"` 4769 # Python 3.8 and later distinguish building Python modules from linking to the 4770 # libpython, so embedders must use the "-embed" pkg-config module: 4771 # (https://bugs.python.org/issue36721) 4772 # AM_PATH_PYTHON above already enforces a 3.11 floor, so "-embed" is always 4773 # the right variant here. (The old "$python_version" -lt "3.8" test was a 4774 # numeric comparison on a string like "3.11" and could never work.) 4775 PKG_CHECK_MODULES(PYTHON, python-$python_version-embed, PYTHON_PC="TRUE", PYTHON_PC="" ) 4776 if test "$PYTHON_PC" != "TRUE"; then 4777 PYTHON_CFLAGS="-I$python_include" 4778 PYTHON_LIBS="-lpython$python_version" 4779 fi 4780fi 4781if test "$with_system_python" = "yes" ; then 4782 SYSTEM_PYTHON=YES 4783 dnl check if the headers really work: 4784 save_CPPFLAGS="$CPPFLAGS" 4785 CPPFLAGS="$CPPFLAGS $PYTHON_CFLAGS" 4786 AC_CHECK_HEADER(Python.h, [], 4787 [AC_MSG_ERROR(Python headers not found)], []) 4788 CPPFLAGS="$save_CPPFLAGS" 4789else 4790 SYSTEM_PYTHON=NO 4791 BUILD_TYPE="$BUILD_TYPE PYTHON" 4792 AC_MSG_RESULT([internal]) 4793 # Embedded python dies without Home set 4794 if test "z$HOME" = "z"; then 4795 export HOME=""; 4796 fi 4797 dnl The internal Python tarball is a .tgz (see main/external_deps.lst), so 4798 dnl gzip is all that is needed to unpack it. The old bzip2 requirement was 4799 dnl for the Python 2.x .tar.bz2 and no longer applies. 4800fi 4801AC_SUBST(SYSTEM_PYTHON) 4802AC_SUBST(PYTHON_BIN) 4803AC_SUBST(PYTHON_CFLAGS) 4804AC_SUBST(PYTHON_LIBS) 4805HOME=`echo $HOME | sed 's:\\\\:/:g'` 4806AC_SUBST(HOME) 4807 4808dnl =================================================================== 4809dnl Check for system lucene 4810dnl =================================================================== 4811AC_MSG_CHECKING([which lucene to use]) 4812if test -n "$with_system_lucene" -o -n "$with_system_libs" && \ 4813 test "$with_system_lucene" != "no" && test "$with_system_jars" != "no"; then 4814 AC_MSG_RESULT([external]) 4815 SYSTEM_LUCENE=YES 4816 if test -z $LUCENE_CORE_JAR; then 4817 AC_CHECK_FILE(/usr/share/java/lucene-core-2.9.4.jar, 4818 [ LUCENE_CORE_JAR=/usr/share/java/lucene-core-2.9.4.jar ], 4819 [ 4820 AC_CHECK_FILE(/usr/share/java/lucene-core.jar, 4821 [ LUCENE_CORE_JAR=/usr/share/java/lucene-core.jar ], 4822 [ AC_CHECK_FILE(/usr/share/java/lucene.jar, 4823 [ LUCENE_CORE_JAR=/usr/share/java/lucene.jar ], 4824 [ AC_MSG_ERROR(lucene-core.jar replacement not found)] 4825 ) 4826 ] 4827 ) 4828 ] 4829 ) 4830 else 4831 AC_CHECK_FILE($LUCENE_CORE_JAR, [], 4832 [AC_MSG_ERROR(lucene-core.jar not found.)], []) 4833 fi 4834 4835 if test -z $LUCENE_ANALYZERS_JAR; then 4836 AC_CHECK_FILE(/usr/share/java/lucene-analyzers-2.3.jar, 4837 [ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-analyzers-2.3.jar ], 4838 [ 4839 AC_CHECK_FILE(/usr/share/java/lucene-contrib/lucene-analyzers.jar, 4840 [ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-contrib/lucene-analyzers.jar ], 4841 [ AC_MSG_ERROR(lucene-analyzers.jar replacement not found.)] 4842 ) 4843 ] 4844 ) 4845 else 4846 AC_CHECK_FILE($LUCENE_CORE_JAR, [], 4847 [ AC_MSG_ERROR(lucene-analyzers.jar not found.)], []) 4848 fi 4849 AC_MSG_CHECKING([whether lucene is version 2.x]) 4850 export LUCENE_CORE_JAR 4851 if $PERL -e 'use Archive::Zip; 4852 my $file = "$ENV{'LUCENE_CORE_JAR'}"; 4853 my $zip = Archive::Zip->new( $file ); 4854 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 4855 if ( $mf =~ m/Specification-Version: 2.*/ ) { 4856 exit 0; 4857 } else { 4858 exit 1; 4859 }'; then 4860 AC_MSG_RESULT([yes]) 4861 else 4862 AC_MSG_RESULT([no]) 4863 AC_MSG_CHECKING([whether lucene is version 3.x]) 4864 4865 if $PERL -e 'use Archive::Zip; 4866 my $file = "$ENV{'LUCENE_CORE_JAR'}"; 4867 my $zip = Archive::Zip->new( $file ); 4868 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 4869 if ( $mf =~ m/Specification-Version: 3.*/ ) { 4870 exit 0; 4871 } else { 4872 exit 1; 4873 }'; then 4874 AC_MSG_RESULT([yes]) 4875 else 4876 AC_MSG_ERROR([no, you need lucene 2 or 3]) 4877 fi 4878 fi 4879 4880else 4881 AC_MSG_RESULT([internal]) 4882 SYSTEM_LUCENE=NO 4883 BUILD_TYPE="$BUILD_TYPE LUCENE" 4884fi 4885AC_SUBST(SYSTEM_LUCENE) 4886AC_SUBST(LUCENE_CORE_JAR) 4887AC_SUBST(LUCENE_ANALYZERS_JAR) 4888 4889AC_MSG_CHECKING([whether to build the MySQL Connector extension]) 4890if test -n "$enable_mysql_connector" -a "$enable_mysql_connector" != "no"; then 4891 AC_MSG_RESULT([yes]) 4892 ENABLE_MYSQLC=YES 4893 AC_MSG_CHECKING([for mysqlc module]) 4894 if test -d mysqlc; then 4895 AC_MSG_RESULT([OK]) 4896 else 4897 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 4898 fi 4899 BUILD_TYPE="$BUILD_TYPE MYSQLC" 4900else 4901 AC_MSG_RESULT([no]) 4902 ENABLE_MYSQLC=NO 4903fi 4904AC_SUBST(ENABLE_MYSQLC) 4905 4906if test "$ENABLE_MYSQLC" = "YES"; then 4907dnl =================================================================== 4908dnl Check for system MySQL 4909dnl =================================================================== 4910AC_MSG_CHECKING([for mysql pre-requisites]) 4911if test -n "$with_system_mysql" -o -n "$with_system_libs" && \ 4912 test "$with_system_mysql" != "no" && test "$with_system_libs" != "no"; then 4913 AC_MSG_RESULT([external MySQL]) 4914 SYSTEM_MYSQL=YES 4915 AC_PATH_PROG( MYSQLCONFIG, mysql_config) 4916 AC_MSG_CHECKING([MySQL version]) 4917 if test -z "$MYSQLCONFIG" -o ! -x "$MYSQLCONFIG" ; then 4918 AC_MSG_ERROR([can not find/execute mysql_config]); 4919 fi 4920 MYSQL_VERSION=`$MYSQLCONFIG --version` 4921 MYSQL_MAJOR=`$MYSQLCONFIG --version | cut -d"." -f1` 4922 if test "$MYSQL_MAJOR" -ge "5"; then 4923 AC_MSG_RESULT([OK]) 4924 else 4925 AC_MSG_ERROR([too old, use 5.0.x or 5.1.x]) 4926 fi 4927 AC_MSG_CHECKING([for MySQL Client library]) 4928 MYSQL_INC=`$MYSQLCONFIG --include` 4929 MYSQL_LIB=`$MYSQLCONFIG --libs` 4930 MYSQL_DEFINES=`$MYSQLCONFIG --cflags | sed -e s,$MYSQL_INC,,` 4931 AC_MSG_RESULT([includes $MYSQL_INC, libraries $MYSQL_LIB]) 4932else 4933 SYSTEM_MYSQL=NO 4934 if test -n "$with_libmysql_path"; then 4935 AC_MSG_RESULT([external Connector/C (libmysql)]) 4936 LIBMYSQL=libmysql.so 4937 if test "$_os" = "Darwin"; then 4938 LIBMYSQL=libmysql.dylib 4939 elif test "$_os" = "WINNT"; then 4940 LIBMYSQL=libmysql.dll 4941 fi 4942 AC_MSG_CHECKING([for $LIBMYSQL]) 4943 if test -e "$with_libmysql_path/lib/$LIBMYSQL"; then 4944 AC_MSG_RESULT([found.]) 4945 LIBMYSQL_PATH=$with_libmysql_path 4946 else 4947 AC_MSG_ERROR([not found. Please specify proper path in --with-libmysql-path.]) 4948 fi 4949 else 4950 AC_MSG_ERROR([not given. Please specify either --with-system-mysql or --with-libmysql-path]) 4951 fi 4952fi 4953AC_SUBST(SYSTEM_MYSQL) 4954AC_SUBST(MYSQL_INC) 4955AC_SUBST(MYSQL_LIB) 4956AC_SUBST(MYSQL_DEFINES) 4957AC_SUBST(LIBMYSQL_PATH) 4958 4959AC_LANG_PUSH([C++]) 4960dnl =================================================================== 4961dnl Check for system MySQL C++ Connector 4962dnl =================================================================== 4963# FIXME! 4964# who thought this too-generic cppconn dir was a good idea? 4965AC_MSG_CHECKING([MySQL Connector/C++]) 4966if test -n "$with_system_mysql_cppconn" -o -n "$with_system_libs" && \ 4967 test "$with_system_mysql_cppconn" != "no" && test "$with_system_libs" != "no"; then 4968 AC_MSG_RESULT([external]) 4969 SYSTEM_MYSQL_CPPCONN=YES 4970 AC_LANG_PUSH([C++]) 4971 AC_CHECK_HEADER(mysql_driver.h, [], 4972 [AC_MSG_ERROR(mysql_driver.h not found. install MySQL C++ Connectivity)], []) 4973 AC_CHECK_LIB(mysqlcppconn, main, [], 4974 [AC_MSG_ERROR(MySQL C++ Connectivity lib not found or functional)], []) 4975 AC_MSG_CHECKING([version]) 4976 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 4977#include <mysql_driver.h> 4978 4979int main(int argc, char **argv) { 4980 sql::Driver *driver; 4981 driver = get_driver_instance(); 4982 if (driver->getMajorVersion() > 1 || \ 4983 (driver->getMajorVersion() == 1 && driver->getMinorVersion() > 0) || \ 4984 (driver->getMajorVersion() == 1 && driver->getMinorVersion() == 0 && driver->getPatchVersion() >= 6)) 4985 return 0; 4986 else 4987 return 1; 4988} 4989 ]])],[AC_MSG_RESULT(OK)],[AC_MSG_ERROR([not suitable, we need >= 1.0.6])],[]) 4990 AC_LANG_POP([C++]) 4991 4992else 4993 AC_MSG_RESULT([no]) 4994 SYSTEM_MYSQL_CPPCONN= 4995fi 4996AC_LANG_POP([C++]) 4997AC_SUBST(SYSTEM_MYSQL_CPPCONN) 4998fi 4999 5000dnl =================================================================== 5001dnl Check for system hsqldb 5002dnl =================================================================== 5003AC_MSG_CHECKING([which hsqldb to use]) 5004if test -n "$with_system_hsqldb" -o -n "$with_system_libs" && \ 5005 test "$with_system_hsqldb" != "no" && test "$with_system_jars" != "no"; then 5006 AC_MSG_RESULT([external]) 5007 SYSTEM_HSQLDB=YES 5008 if test -z $HSQLDB_JAR; then 5009 HSQLDB_JAR=/usr/share/java/hsqldb.jar 5010 fi 5011 AC_CHECK_FILE($HSQLDB_JAR, [], 5012 [AC_MSG_ERROR(hsqldb.jar not found.)], []) 5013 AC_MSG_CHECKING([whether hsqldb is 1.8.0.x]) 5014 export HSQLDB_JAR 5015 if $PERL -e 'use Archive::Zip; 5016 my $file = "$ENV{'HSQLDB_JAR'}"; 5017 my $zip = Archive::Zip->new( $file ); 5018 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 5019 if ( $mf =~ m/Specification-Version: 1.8.*/ ) { 5020 push @l, split(/\n/, $mf); 5021 foreach my $line (@l) { 5022 if ($line =~ m/Specification-Version:/) { 5023 ($t, $version) = split (/:/,$line); 5024 $version =~ s/^\s//; 5025 ($a, $b, $c, $d) = split (/\./,$version); 5026 if ($c == "0" && $d > "8") { 5027 exit 0; 5028 } else { 5029 exit 1; 5030 } 5031 } 5032 } 5033 } else { 5034 exit 1; 5035 }'; then 5036 AC_MSG_RESULT([yes]) 5037 else 5038 AC_MSG_ERROR([no, you need hsqldb >= 1.8.0.9 but < 1.8.1]) 5039 fi 5040else 5041 AC_MSG_RESULT([internal]) 5042 SYSTEM_HSQLDB=NO 5043 BUILD_TYPE="$BUILD_TYPE HSQLDB" 5044fi 5045AC_SUBST(SYSTEM_HSQLDB) 5046AC_SUBST(HSQLDB_JAR) 5047 5048dnl =================================================================== 5049dnl Check for system beanshell 5050dnl =================================================================== 5051ENABLE_BEANSHELL=YES 5052AC_MSG_CHECKING([which beanshell to use]) 5053if test -n "$with_system_beanshell" -o -n "$with_system_libs" && \ 5054 test "$with_system_beanshell" != "no" && test "$with_system_jars" != "no"; then 5055 AC_MSG_RESULT([external]) 5056 SYSTEM_BSH=YES 5057 if test -z $BSH_JAR; then 5058 BSH_JAR=/usr/share/java/bsh.jar 5059 fi 5060 AC_CHECK_FILE($BSH_JAR, [], 5061 [AC_MSG_ERROR(bsh.jar not found.)], []) 5062elif test "x$enable_beanshell" = "xyes"; then 5063 AC_MSG_RESULT([internal]) 5064 SYSTEM_BSH=NO 5065 BUILD_TYPE="$BUILD_TYPE BSH" 5066else 5067 AC_MSG_RESULT([none (disabled)]) 5068 SYSTEM_BSH=NO 5069 ENABLE_BEANSHELL=NO 5070fi 5071AC_SUBST(SYSTEM_BSH) 5072AC_SUBST(BSH_JAR) 5073AC_SUBST(ENABLE_BEANSHELL) 5074 5075 5076dnl =================================================================== 5077dnl Check for saxon. It can come from two different places: 5078dnl - pre-installed on the system. This is checked when the --with-system-saxon 5079dnl option is given to configure. 5080dnl The exact place can be specified with the --with-saxon-jar=<path> option. 5081dnl - From the saxon tar ball in ext_sources/. This is used when --enable-saxon 5082dnl is given to configure but not any of --with-system-saxon or --with-saxon-jar. 5083dnl =================================================================== 5084DISABLE_SAXON= 5085AC_MSG_CHECKING([which saxon to use]) 5086if test -n "$with_system_saxon" -o -n "$with_system_libs" && \ 5087 test "$with_system_saxon" != "no" && test "$with_system_jars" != "no"; then 5088 AC_MSG_RESULT([external]) 5089 SYSTEM_SAXON=YES 5090 if test -z $SAXON_JAR; then 5091 AC_CHECK_FILE(/usr/share/java/saxon9.jar, 5092 [ SAXON_JAR=/usr/share/java/saxon9.jar ], 5093 [ 5094 AC_CHECK_FILE(/usr/share/java/saxon.jar, 5095 [ SAXON_JAR=/usr/share/java/saxon.jar ], 5096 [ AC_CHECK_FILE(/usr/share/java/saxon9.jar, 5097 [ SAXON_JAR=/usr/share/java/saxon9.jar ], 5098 [ AC_MSG_ERROR(saxon.jar replacement not found)] 5099 ) 5100 ] 5101 ) 5102 ] 5103 ) 5104 else 5105 AC_CHECK_FILE($SAXON_JAR, [], 5106 [AC_MSG_ERROR(saxon.jar replacement not found.)], []) 5107 fi 5108 if test -n "$SERIALIZER_JAR"; then 5109 AC_CHECK_FILE($SERIALIZER_JAR, [], 5110 [AC_MSG_ERROR(serializer.jar not found.)], []) 5111 AC_SUBST(SERIALIZER_JAR) 5112 fi 5113 5114dnl Saxon comes in two practically available versions, the out-of-date saxonb which 5115dnl supports the java extensions that AOO uses, and the up-to-date saxon he 5116dnl "home edition" version, which is crippled to not support those java extensions. 5117dnl And as an aside the he one also needs to be tweaked to include 5118dnl a META-INF/services to broadcast that it supports the jaxp transform factory 5119 5120 AC_MSG_CHECKING([if saxon works]) 5121 cat > saxontest.java <<_ACEOF 5122[import javax.xml.transform.TransformerFactory; 5123import javax.xml.transform.Transformer; 5124import javax.xml.transform.stream.StreamSource; 5125import java.io.*; 5126 5127import net.sf.saxon.FeatureKeys; 5128 5129class saxontest { 5130 public static void main(String[] args) { 5131 System.setProperty("javax.xml.transform.TransformerFactory", 5132 "net.sf.saxon.TransformerFactoryImpl"); 5133 try { 5134 TransformerFactory tfactory = TransformerFactory.newInstance(); 5135 // some external saxons (Debian, Ubuntu, ...) have this disabled 5136 // per default 5137 tfactory.setAttribute(FeatureKeys.ALLOW_EXTERNAL_FUNCTIONS, new Boolean(true)); 5138 System.out.println("TransformerFactory is" + 5139 tfactory.getClass().getName()); 5140 Transformer transformer = tfactory.newTransformer( 5141 new StreamSource(new File(args[0]))); 5142 } catch(Exception e){ 5143 e.printStackTrace(System.err); 5144 System.exit(-1); 5145 } 5146 System.exit(0); 5147 } 5148} 5149] 5150_ACEOF 5151 cat > saxontest.xsl<<_ACEOF 5152[<?xml version="1.0" encoding="UTF-8"?> 5153<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> 5154 <xsl:template match="/"> 5155 <xsl:value-of select="math:sqrt(1)" xmlns:math="java:java.lang.Math"/> 5156 </xsl:template> 5157</xsl:stylesheet> 5158] 5159_ACEOF 5160 javac_cmd="$JAVACOMPILER -cp $SAXON_JAR saxontest.java 1>&2" 5161 AC_TRY_EVAL(javac_cmd) 5162 if test $? = 0 && test -f ./saxontest.class ; then 5163 java_cmd="$JAVAINTERPRETER -cp $SAXON_JAR:. saxontest saxontest.xsl 1>&2" 5164 AC_TRY_EVAL(java_cmd) 5165 if test $? = 0; then 5166 AC_MSG_RESULT([yes]) 5167 else 5168 cat saxontest.java >&5 5169 AC_MSG_RESULT([no]) 5170 AC_MSG_ERROR([Non-functional saxon jar, e.g. crippled saxon-he instead of saxonb]) 5171 fi 5172 else 5173 AC_MSG_RESULT([no]) 5174 cat saxontest.java >&5 5175 AC_MSG_ERROR([saxontest could not be compiled, non-functional saxon jar]) 5176 fi 5177elif test "x$enable_saxon" = "xyes"; then 5178 AC_MSG_RESULT([internal]) 5179 SYSTEM_SAXON=NO 5180 BUILD_TYPE="$BUILD_TYPE SAXON" 5181else 5182 AC_MSG_RESULT([none (disabled)]) 5183 SYSTEM_SAXON=NO 5184 DISABLE_SAXON=YES 5185fi 5186AC_SUBST(SYSTEM_SAXON) 5187AC_SUBST(SAXON_JAR) 5188AC_SUBST(DISABLE_SAXON) 5189 5190 5191dnl =================================================================== 5192dnl Check for rhino 5193dnl =================================================================== 5194ENABLE_JAVASCRIPT= 5195AC_MSG_CHECKING([whether to enable support for JavaScript]) 5196if test "x$enable_javascript" = "xyes"; then 5197 BUILD_TYPE="$BUILD_TYPE RHINO" 5198 AC_MSG_RESULT([yes]) 5199 ENABLE_JAVASCRIPT=YES 5200else 5201 AC_MSG_RESULT([no]) 5202 ENABLE_JAVASCRIPT=NO 5203fi 5204AC_SUBST(ENABLE_JAVASCRIPT) 5205 5206 5207dnl =================================================================== 5208dnl Check for CoinMP 5209dnl =================================================================== 5210ENABLE_COINMP= 5211SYSTEM_COINMP=NO 5212COINMP_CFLAGS= 5213COINMP_LIBS= 5214AC_MSG_CHECKING([whether to enable support for CoinMP]) 5215if test "x$enable_coinmp" = "xyes"; then 5216 BUILD_TYPE="$BUILD_TYPE COINMP" 5217 AC_MSG_RESULT([yes]) 5218 ENABLE_COINMP=YES 5219 5220 dnl Check whether to use system or internal CoinMP 5221 AC_MSG_CHECKING([which coinmp to use]) 5222 if test "x$with_system_coinmp" = "xyes" -o -n "$with_system_libs"; then 5223 AC_MSG_RESULT([system]) 5224 PKG_CHECK_MODULES([COINMP], [coinmp]) 5225 SYSTEM_COINMP=YES 5226 # some systems need this. Like Ubuntu.... 5227 AC_CHECK_LIB(m, floor) 5228 AC_CHECK_LIB(dl, dlopen) 5229 else 5230 AC_MSG_RESULT([internal]) 5231 SYSTEM_COINMP=NO 5232 BUILD_TYPE="$BUILD_TYPE COINMP" 5233 fi 5234else 5235 AC_MSG_RESULT([no]) 5236 ENABLE_COINMP=NO 5237fi 5238AC_SUBST(ENABLE_COINMP) 5239AC_SUBST(SYSTEM_COINMP) 5240AC_SUBST(COINMP_CFLAGS) 5241AC_SUBST(COINMP_LIBS) 5242 5243 5244dnl =================================================================== 5245dnl Check for system curl 5246dnl =================================================================== 5247with_system_curl_dir="$with_system_curl" 5248AC_MSG_CHECKING([which curl to use]) 5249if test -n "$with_system_curl" -o -n "$with_system_libs" && \ 5250 test "$with_system_curl" != "no"; then 5251 AC_MSG_RESULT([external]) 5252 SYSTEM_CURL=YES 5253 5254 dnl See the matching libxml check above for why this pins 5255 dnl curl-config to the directory given to --with-system-curl instead 5256 dnl of resolving a bare "curl-config" off PATH. 5257 if test "$with_system_curl_dir" != "yes" -a -n "$with_system_curl_dir"; then 5258 CURLCONFIG="$with_system_curl_dir/bin/curl-config" 5259 if test ! -x "$CURLCONFIG"; then 5260 AC_MSG_ERROR([--with-system-curl=$with_system_curl_dir given, but $CURLCONFIG not found or not executable]) 5261 fi 5262 else 5263 AC_PATH_PROG( CURLCONFIG, curl-config) 5264 if test -z "$CURLCONFIG"; then 5265 AC_MSG_ERROR([install curl to run this script]) 5266 fi 5267 fi 5268 5269 # check curl version 5270 AC_MSG_CHECKING([whether curl is >= 7.13.1]) 5271 if test "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $1 }'`" -gt "7" -a \ 5272 "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $2 }'`" -gt "13" -a \ 5273 "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $3 }'`" -gt "1"; then 5274 AC_MSG_ERROR([no, you need at least curl 7.13,1]) 5275 else 5276 AC_MSG_RESULT([yes]) 5277 fi 5278 5279 # Does curl use OpenSSL as its SSL implementation? Needed for ucb/source/ucp/webdav. 5280 AC_MSG_CHECKING([whether curl uses OpenSSL as its SSL backend]) 5281 if $CURLCONFIG --ssl-backends | $GREP -q 'OpenSSL'; then 5282 AC_MSG_RESULT([yes]) 5283 else 5284 AC_MSG_ERROR([no, cannot use system curl whose SSL backend isn't OpenSSL]) 5285 fi 5286 5287 CURL_LIBS=`$CURLCONFIG --libs` 5288 CURL_CFLAGS=`$CURLCONFIG --cflags` 5289 CURL_PREFIX=`$CURLCONFIG --prefix` 5290else 5291 AC_MSG_RESULT([internal]) 5292 SYSTEM_CURL=NO 5293 BUILD_TYPE="$BUILD_TYPE CURL" 5294fi 5295AC_SUBST(SYSTEM_CURL) 5296AC_SUBST(CURL_CFLAGS) 5297AC_SUBST(CURL_LIBS) 5298AC_SUBST(CURL_PREFIX) 5299 5300dnl =================================================================== 5301dnl Check for system openssl 5302dnl =================================================================== 5303dnl This sits ahead of the static-pin block below because that block 5304dnl rewrites OPENSSL_LIBS. openssl has no *-config script, so the prefix and 5305dnl libdir the pin block needs are read from the .pc file (libdir can be 5306dnl lib64 rather than $prefix/lib). 5307AC_MSG_CHECKING([which libssl to use]) 5308if test -n "$with_system_openssl" -o -n "$with_system_libs" && \ 5309 test "$with_system_openssl" != "no"; then 5310 AC_MSG_RESULT([external]) 5311 if test "$_os" = "FreeBSD"; then 5312 OPENSSL_CFLAGS= 5313 OPENSSL_LIBS="-lssl -lcrypto" 5314 else 5315 PKG_CHECK_MODULES( OPENSSL, openssl ) 5316 OPENSSL_PREFIX=`$PKG_CONFIG --variable=prefix openssl` 5317 OPENSSL_LIBDIR=`$PKG_CONFIG --variable=libdir openssl` 5318 fi 5319 SYSTEM_OPENSSL=YES 5320else 5321 AC_MSG_RESULT([internal]) 5322 SYSTEM_OPENSSL=NO 5323 BUILD_TYPE="$BUILD_TYPE OPENSSL" 5324fi 5325AC_SUBST(SYSTEM_OPENSSL) 5326AC_SUBST(OPENSSL_CFLAGS) 5327AC_SUBST(OPENSSL_LIBS) 5328 5329dnl =================================================================== 5330dnl Pin selected system libraries to their static archives 5331dnl =================================================================== 5332dnl Runs after the libxml/libxslt/curl/openssl checks above, which is where 5333dnl the *_PREFIX and *_LIBS values it rewrites are established. 5334dnl 5335dnl Without this the static-vs-dynamic choice is implicit: "-lfoo" lets the 5336dnl linker take a dylib over an archive, and the libxml2 link in 5337dnl forms/util and xmlsecurity/util explicitly prefers a dylib when the 5338dnl prefix has one. Either way a dylib appearing at the prefix silently 5339dnl turns a release build dynamic, and these dylibs carry absolute install 5340dnl names that do not exist on an end user's machine. 5341STATIC_SYSTEM_LIBS= 5342STATIC_SYSTEM_LIBXML=NO 5343STATIC_SYSTEM_LIBXSLT=NO 5344STATIC_SYSTEM_CURL=NO 5345if test -n "$with_static_system_libs" -a "$with_static_system_libs" != "no"; then 5346 if test "$with_static_system_libs" = "yes"; then 5347 AC_MSG_ERROR([--with-static-system-libs needs a list, e.g. --with-static-system-libs=libxml,libxslt,curl]) 5348 fi 5349 for _ssentry in `echo "$with_static_system_libs" | $SED -e 's/,/ /g'`; do 5350 dnl Each entry is NAME or NAME:DIR. The explicit DIR is what makes 5351 dnl libiconv usable here: it has no --with-system-libiconv, so 5352 dnl configure has no prefix of its own to fall back on. 5353 _sslib=`echo "$_ssentry" | $SED -e 's/:.*//'` 5354 _sslibdir= 5355 _ssgiven= 5356 case "$_ssentry" in 5357 *:*) _ssgiven=`echo "$_ssentry" | $SED -e 's/^[[^:]]*://'` ;; 5358 esac 5359 AC_MSG_CHECKING([for a static system $_sslib]) 5360 case "$_sslib" in 5361 libxml) 5362 _ssenabled="$SYSTEM_LIBXML"; _ssprefix="$LIBXML_PREFIX"; _ssopt="--with-system-libxml" 5363 _ssarchives="libxml2.a"; _sslflags="-lxml2" 5364 ;; 5365 libxslt) 5366 _ssenabled="$SYSTEM_LIBXSLT"; _ssprefix="$LIBXSLT_PREFIX"; _ssopt="--with-system-libxslt" 5367 _ssarchives="libxslt.a libexslt.a"; _sslflags="-lxslt -lexslt" 5368 ;; 5369 curl) 5370 _ssenabled="$SYSTEM_CURL"; _ssprefix="$CURL_PREFIX"; _ssopt="--with-system-curl" 5371 _ssarchives="libcurl.a"; _sslflags="-lcurl" 5372 ;; 5373 openssl) 5374 dnl No *-config here: configure takes prefix and libdir from 5375 dnl openssl.pc, so the archives are found even under lib64. 5376 _ssenabled="$SYSTEM_OPENSSL"; _ssprefix="$OPENSSL_PREFIX"; _sslibdir="$OPENSSL_LIBDIR"; _ssopt="--with-system-openssl" 5377 _ssarchives="libssl.a libcrypto.a"; _sslflags="-lssl -lcrypto" 5378 ;; 5379 libiconv) 5380 dnl The bundled XML libs are built --without-iconv, so this only 5381 dnl covers a *system* libxml2/libxslt/curl whose own build enabled 5382 dnl iconv and whose *-config therefore reports -liconv. There is no 5383 dnl --with-system-libiconv to take a prefix from, hence libiconv:DIR. 5384 _ssenabled=YES; _ssprefix="$_ssgiven"; _ssopt= 5385 _ssarchives="libiconv.a"; _sslflags="-liconv" 5386 ;; 5387 *) 5388 AC_MSG_ERROR([unsupported library "$_sslib" in --with-static-system-libs; supported: libxml, libxslt, curl, openssl, libiconv]) 5389 ;; 5390 esac 5391 if test -n "$_ssgiven"; then 5392 _ssprefix="$_ssgiven" 5393 _sslibdir= 5394 fi 5395 if test "$_ssenabled" != "YES"; then 5396 AC_MSG_ERROR([--with-static-system-libs=$_sslib requires $_ssopt]) 5397 fi 5398 if test -z "$_ssprefix"; then 5399 if test "$_sslib" = "openssl"; then 5400 AC_MSG_ERROR([--with-static-system-libs=openssl found no prefix from pkg-config (FreeBSD?); write openssl:DIR, e.g. openssl:/usr/local]) 5401 elif test -n "$_ssopt"; then 5402 AC_MSG_ERROR([--with-static-system-libs=$_sslib needs a prefix; give $_ssopt=DIR (macOS only)]) 5403 else 5404 AC_MSG_ERROR([--with-static-system-libs=$_sslib needs a prefix; write $_sslib:DIR, e.g. $_sslib:/usr/local]) 5405 fi 5406 fi 5407 test -z "$_sslibdir" && _sslibdir="$_ssprefix/lib" 5408 for _ssa in $_ssarchives; do 5409 if test ! -f "$_sslibdir/$_ssa"; then 5410 AC_MSG_ERROR([--with-static-system-libs=$_sslib given, but $_sslibdir/$_ssa not found]) 5411 fi 5412 done 5413 dnl Replace each "-lfoo" with the archive's absolute path so the 5414 dnl linker cannot pick a dylib sitting beside it. Matching on a 5415 dnl trailing space (the value gets one appended, then trimmed) keeps 5416 dnl this to portable BRE -- $SED is whatever sed AC_PATH_PROGS found, 5417 dnl which is not required to be GNU, and \| alternation silently 5418 dnl matches nothing under the BSD sed macOS ships. 5419 for _ssl in $_sslflags; do 5420 _ssa="lib`echo "$_ssl" | $SED -e 's/^-l//'`.a" 5421 case "$_sslib" in 5422 libxml) LIBXML_LIBS=`echo "$LIBXML_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5423 libxslt) LIBXSLT_LIBS=`echo "$LIBXSLT_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5424 curl) CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` ;; 5425 openssl) 5426 dnl curl-config reports -lssl -lcrypto for a static libcurl, so the 5427 dnl pin has to reach CURL_LIBS as well as OPENSSL_LIBS. 5428 OPENSSL_LIBS=`echo "$OPENSSL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5429 CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5430 ;; 5431 libiconv) 5432 dnl iconv is a transitive dep, so -liconv turns up in whichever 5433 dnl of these *-config reported it -- rewrite all of them. 5434 LIBXML_LIBS=`echo "$LIBXML_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5435 LIBXSLT_LIBS=`echo "$LIBXSLT_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5436 CURL_LIBS=`echo "$CURL_LIBS " | $SED -e "s|$_ssl |$_sslibdir/$_ssa |g" -e 's| *$||'` 5437 ;; 5438 esac 5439 done 5440 case "$_sslib" in 5441 libxml) STATIC_SYSTEM_LIBXML=YES ;; 5442 libxslt) STATIC_SYSTEM_LIBXSLT=YES ;; 5443 curl) STATIC_SYSTEM_CURL=YES ;; 5444 esac 5445 STATIC_SYSTEM_LIBS="$STATIC_SYSTEM_LIBS $_sslib" 5446 AC_MSG_RESULT([$_sslibdir]) 5447 done 5448 STATIC_SYSTEM_LIBS=`echo $STATIC_SYSTEM_LIBS` 5449fi 5450AC_SUBST(STATIC_SYSTEM_LIBS) 5451AC_SUBST(STATIC_SYSTEM_LIBXML) 5452AC_SUBST(STATIC_SYSTEM_LIBXSLT) 5453AC_SUBST(STATIC_SYSTEM_CURL) 5454 5455dnl =================================================================== 5456dnl Check for system mdds 5457dnl =================================================================== 5458AC_MSG_CHECKING([which mdds to use]) 5459if test -n "$with_system_mdds" -o -n "$with_system_headers" && \ 5460 test "$with_system_mdds" != "no"; then 5461 AC_MSG_RESULT([external]) 5462 SYSTEM_MDDS=YES 5463 AC_LANG_PUSH([C++]) 5464 AC_CHECK_HEADER(mdds/flat_segment_tree.hpp, [], 5465 [AC_MSG_ERROR(mdds/flat_segment_tree.hpp not found. install mdds)], []) 5466 AC_LANG_POP([C++]) 5467else 5468 AC_MSG_RESULT([internal]) 5469 BUILD_TYPE="$BUILD_TYPE MDDS" 5470 SYSTEM_MDDS=NO 5471fi 5472AC_SUBST(SYSTEM_MDDS) 5473 5474dnl =================================================================== 5475dnl Check for system boost 5476dnl =================================================================== 5477AC_MSG_CHECKING([which boost to use]) 5478if test -n "$with_system_boost" -o -n "$with_system_headers" && \ 5479 test "$with_system_boost" != "no"; then 5480 AC_MSG_RESULT([external]) 5481 SYSTEM_BOOST=YES 5482 AC_LANG_PUSH([C++]) 5483 AC_CHECK_HEADER(boost/shared_ptr.hpp, [], 5484 [AC_MSG_ERROR(boost/shared_ptr.hpp not found. install boost)], []) 5485 AC_CHECK_HEADER(boost/spirit/include/classic_core.hpp, [], 5486 [AC_MSG_ERROR(boost/spirit/include/classic_core.hpp not found. install boost >= 1.36)], []) 5487 AC_CHECK_HEADER(boost/function.hpp, [], 5488 [AC_MSG_ERROR(boost/function.hpp not found. install boost)], []) 5489 5490 save_CXXFLAGS=$CXXFLAGS 5491 CXXFLAGS="$CXXFLAGS -fno-exceptions" 5492 AC_MSG_CHECKING([whether boost/function.hpp compiles with -fno-exceptions]) 5493 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <boost/function.hpp> 5494]], [[]])],[ac_cv_cxx_boost_no_exceptons_broken=no],[ac_cv_cxx_boost_no_exceptons_broken=yes]) 5495 5496 if test "$ac_cv_cxx_boost_no_exceptons_broken" = "yes"; then 5497 AC_MSG_ERROR([no, see https://bugzilla.redhat.com/show_bug.cgi?id=477131]) 5498 else 5499 AC_MSG_RESULT([yes]) 5500 fi 5501 CXXFLAGS=$save_CXXFLAGS 5502 AC_LANG_POP([C++]) 5503else 5504 AC_MSG_RESULT([internal]) 5505 BUILD_TYPE="$BUILD_TYPE BOOST" 5506 SYSTEM_BOOST=NO 5507fi 5508AC_SUBST(SYSTEM_BOOST) 5509 5510dnl =================================================================== 5511dnl Check for system vigra 5512dnl =================================================================== 5513AC_MSG_CHECKING([which vigra to use]) 5514if test -n "$with_system_vigra" -o -n "$with_system_headers" && \ 5515 test "$with_system_vigra" != "no"; then 5516 AC_MSG_RESULT([external]) 5517 SYSTEM_VIGRA=YES 5518 AC_LANG_PUSH([C++]) 5519 AC_CHECK_HEADER(vigra/copyimage.hxx, [], 5520 [AC_MSG_ERROR(vigra/copyimage.hxx not found. install vigra)], []) 5521 AC_LANG_POP([C++]) 5522else 5523 AC_MSG_RESULT([internal]) 5524 BUILD_TYPE="$BUILD_TYPE VIGRA" 5525 SYSTEM_VIGRA=NO 5526fi 5527AC_SUBST(SYSTEM_VIGRA) 5528 5529dnl =================================================================== 5530dnl Check for system odbc 5531dnl =================================================================== 5532AC_MSG_CHECKING([which odbc headers to use]) 5533if test -n "$with_system_odbc_headers" -o -n "$with_system_headers" && \ 5534 test "$with_system_odbc_headers" != "no"; then 5535 AC_MSG_RESULT([external]) 5536 SYSTEM_ODBC_HEADERS=YES 5537 5538 AC_CHECK_HEADER(sqlext.h, [], 5539 [AC_MSG_ERROR(odbc not found. install odbc)], []) 5540else 5541 AC_MSG_RESULT([internal]) 5542 SYSTEM_ODBC_HEADERS=NO 5543 BUILD_TYPE="$BUILD_TYPE UNIXODBC" 5544fi 5545AC_SUBST(SYSTEM_ODBC_HEADERS) 5546 5547AC_MSG_CHECKING([whether to build XML Security support]) 5548if test "$enable_nss_module" = "no"; then 5549 AC_MSG_RESULT([no, since NSS disabled but needed]) 5550else 5551 AC_MSG_RESULT([yes]) 5552fi 5553 5554AC_MSG_CHECKING([whether to build LDAP configuration backend]) 5555if test -z "$enable_ldap" || test "$enable_ldap" = "yes"; then 5556 if test "$with_openldap" = "yes"; then 5557 AC_MSG_RESULT([yes]) 5558 WITH_LDAP=YES 5559 else 5560 WITH_LDAP=NO 5561 fi 5562else 5563 AC_MSG_RESULT([no]) 5564 WITH_LDAP=NO 5565fi 5566 5567if test "$WITH_LDAP" = "YES"; then 5568 dnl =================================================================== 5569 dnl Test whether we want to use the OpenLDAP LDAP SDK 5570 dnl =================================================================== 5571 AC_MSG_CHECKING([which LDAP SDK to use]) 5572 if test -n "$with_openldap" && test "$with_openldap" != "no"; then 5573 AC_MSG_RESULT([OpenLDAP]) 5574 WITH_OPENLDAP=YES 5575 AC_CHECK_HEADERS(ldap.h, [], 5576 [AC_MSG_ERROR(ldap.h not found. install openldap libs)], []) 5577 AC_CHECK_LIB(ldap, ldap_simple_bind_s, [], 5578 [AC_MSG_ERROR(openldap lib not found or functional)], []) 5579 # rumours say that OpenLDAP doesn't have that function. I looked and 5580 # it has it. Test for it to be sure 5581 AC_CHECK_LIB(ldap, ldap_set_option, [], 5582 [AC_MSG_ERROR(openldap lib not found or functional)], []) 5583 fi 5584fi 5585AC_SUBST(WITH_LDAP) 5586AC_SUBST(WITH_OPENLDAP) 5587 5588AC_MSG_CHECKING([whether to build the internal NSS module]) 5589if test "$enable_nss_module" != "no"; then 5590 ENABLE_NSS_MODULE="YES" 5591 BUILD_TYPE="$BUILD_TYPE NSS" 5592 AC_MSG_RESULT([yes]) 5593 if test "$_os" = "WINNT"; then 5594 AC_MSG_CHECKING([for Mozilla build tooling]) 5595 if test -z "$MOZILLABUILD" ; then 5596AC_MSG_ERROR([ 5597Mozilla build tooling not found! 5598 It is required for NSS that is needed for AOO's security facilities. 5599 Either disable NSS using the option --disable-nss-module 5600 or use the --with-mozilla-build option after installing the tool obtained 5601 from https://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32/]) 5602 else 5603 if test \( "$WITH_MINGWIN" = "yes" \) ; then 5604 if test ! -d "$MOZILLABUILD" ; then 5605AC_MSG_ERROR([Mozilla build tooling incomplete!]) 5606 else 5607 AC_MSG_RESULT([ok]) 5608 fi 5609 else 5610 if test ! -d "$MOZILLABUILD/msys" ; then 5611AC_MSG_ERROR([Mozilla build tooling incomplete!]) 5612 else 5613 AC_MSG_RESULT([ok]) 5614 fi 5615 fi 5616 fi 5617 fi 5618else 5619 ENABLE_NSS_MODULE="NO" 5620 AC_MSG_RESULT([no]) 5621fi 5622 5623AC_SUBST(ENABLE_NSS_MODULE) 5624AC_SUBST(MOZILLABUILD) 5625AC_SUBST(MOZ_INC) 5626 5627dnl =================================================================== 5628dnl Check for system sane 5629dnl =================================================================== 5630AC_MSG_CHECKING([which sane header to use]) 5631if test -n "$with_system_sane_header" -o -n "$with_system_headers" && \ 5632 test "$with_system_sane_header" != "no"; then 5633 AC_MSG_RESULT([external]) 5634 SYSTEM_SANE_HEADER=YES 5635 AC_CHECK_HEADER(sane/sane.h, [], 5636 [AC_MSG_ERROR(sane not found. install sane)], []) 5637else 5638 AC_MSG_RESULT([internal]) 5639 SYSTEM_SANE_HEADER=NO 5640 BUILD_TYPE="$BUILD_TYPE SANE" 5641fi 5642AC_SUBST(SYSTEM_SANE_HEADER) 5643 5644dnl =================================================================== 5645dnl Check for system icu 5646dnl =================================================================== 5647AC_MSG_CHECKING([which icu to use]) 5648if test -n "$with_system_icu" -o -n "$with_system_libs" && \ 5649 test "$with_system_icu" != "no"; then 5650 AC_MSG_RESULT([external]) 5651 SYSTEM_ICU=YES 5652 AC_LANG_PUSH([C++]) 5653 AC_MSG_CHECKING([for unicode/rbbi.h]) 5654 AC_PREPROC_IFELSE([AC_LANG_SOURCE([[unicode/rbbi.h]])],[AC_MSG_RESULT(checked.)],[AC_MSG_ERROR(icu headers not found.)]) 5655 AC_LANG_POP([C++]) 5656 AC_PATH_PROG(SYSTEM_GENBRK, genbrk, [], [$PATH:/usr/sbin:/sbin]) 5657 if test -z "$SYSTEM_GENBRK"; then 5658 AC_MSG_ERROR([\"genbrk\" not found in \$PATH, install the icu development tool \"genbrk"\]) 5659 fi 5660 AC_PATH_PROG(SYSTEM_GENCCODE, genccode, [], [$PATH:/usr/sbin:/sbin]) 5661 if test -z "$SYSTEM_GENCCODE"; then 5662 AC_MSG_ERROR([\"genccode\" not found in \$PATH, install the icu development tool \"genccode"\]) 5663 fi 5664 AC_PATH_PROG(SYSTEM_GENCMN, gencmn, [], [$PATH:/usr/sbin:/sbin]) 5665 if test -z "$SYSTEM_GENCMN"; then 5666 AC_MSG_ERROR([\"gencmn\" not found in \$PATH, install the icu development tool \"gencmn"\]) 5667 fi 5668 5669 AC_PATH_PROG( ICUCONFIG, icu-config) 5670 AC_MSG_CHECKING([ICU version]) 5671 if test "$_os" = "OS2"; then 5672 ICU_MAJOR=4 5673 else 5674 ICU_VERSION=`$ICUCONFIG --version` 5675 ICU_MAJOR=`$ICUCONFIG --version | cut -d"." -f1` 5676 ICU_MINOR=`$ICUCONFIG --version | cut -d"." -f2` 5677 ICU_MICRO=`$ICUCONFIG --version | cut -d"." -f3` 5678 ICU_CFLAGS=`$ICUCONFIG --cppflags` 5679 fi 5680 5681 if test "$ICU_MAJOR" -ge "4"; then 5682 AC_MSG_RESULT([OK]) 5683 else 5684 AC_MSG_ERROR([not suitable, only >= 4.0 supported currently]) 5685 fi 5686 5687else 5688 AC_MSG_RESULT([internal]) 5689 SYSTEM_ICU=NO 5690 BUILD_TYPE="$BUILD_TYPE ICU" 5691fi 5692AC_SUBST(SYSTEM_ICU) 5693AC_SUBST(SYSTEM_GENBRK) 5694AC_SUBST(SYSTEM_GENCCODE) 5695AC_SUBST(SYSTEM_GENCMN) 5696AC_SUBST(ICU_MAJOR) 5697AC_SUBST(ICU_MINOR) 5698AC_SUBST(ICU_MICRO) 5699AC_SUBST(ICU_CFLAGS) 5700 5701dnl =================================================================== 5702dnl Graphite 5703dnl =================================================================== 5704 5705ENABLE_GRAPHITE="FALSE" 5706AC_MSG_CHECKING([whether to enable graphite support]) 5707if test "x$enable_graphite" = "xyes" -a \( "$_os" = "WINNT" -o "$_os" = "Linux" -o "$_os" = "FreeBSD" \) ; then 5708 AC_MSG_RESULT([yes]) 5709 ENABLE_GRAPHITE="TRUE" 5710 AC_MSG_CHECKING([which graphite to use]) 5711 if test -n "$with_system_graphite" -o -n "$with_system_libs" && \ 5712 test "$with_system_graphite" != "no"; then 5713 AC_MSG_RESULT([external]) 5714 SYSTEM_GRAPHITE=YES 5715 PKG_CHECK_MODULES( GRAPHITE, silgraphite ) 5716 else 5717 AC_MSG_RESULT([internal]) 5718 SYSTEM_GRAPHITE=NO 5719 BUILD_TYPE="$BUILD_TYPE GRAPHITE" 5720 fi 5721else 5722 AC_MSG_RESULT([no]) 5723 ENABLE_GRAPHITE="FALSE" 5724fi 5725AC_SUBST(ENABLE_GRAPHITE) 5726AC_SUBST(SYSTEM_GRAPHITE) 5727AC_SUBST(GRAPHITE_LIBS) 5728AC_SUBST(GRAPHITE_CFLAGS) 5729 5730 5731dnl =================================================================== 5732dnl Checks for libraries. 5733dnl =================================================================== 5734dnl Check for Mac OS X native GUI, which may is now required; the X11 build is no longer supported 5735dnl See if we have the AppKit framework for building with Quartz graphics. 5736 5737if test "$_os" = "Darwin"; then 5738 if test "x$with_x" = "xyes"; then 5739 AC_MSG_ERROR([X11 build is no longer supported on MacOSX, please use the native aqua build]) 5740 else 5741 AC_MSG_CHECKING([for /System/Library/Frameworks/AppKit.framework]) 5742 if test -d "/System/Library/Frameworks/AppKit.framework/"; then 5743 AC_MSG_RESULT([yes]) 5744 x_includes="no_x_includes" 5745 x_libraries="no_x_libraries" 5746 dnl disable some things used on other Unix versions but not on the aqua build 5747 enable_gtk=no 5748 enable_cups=no 5749 ENABLE_CUPS="" 5750 AC_SUBST(ENABLE_CUPS) 5751 else 5752 AC_MSG_ERROR([No AppKit.framewrok found]) 5753 fi 5754 fi 5755fi 5756 5757dnl *************************************** 5758dnl testing for X libraries and includes... 5759dnl *************************************** 5760if test "$_os" = "Darwin" -a "x$x_includes" = "xno_x_includes"; then 5761 echo "Do Nothing for _os = Darwin" 5762 dnl Mac OS X using Aqua graphics. Don't check for X11. 5763 : 5764elif test "$_os" = "OS2" ; then 5765 echo "Do Nothing for _os = OS2. Don't check for X11." 5766 dnl OS/2 uses native graphics. Don't check for X11. 5767 : 5768elif test "$_os" != "WINNT" ; then 5769 AC_PATH_X 5770 AC_PATH_XTRA 5771 CPPFLAGS="$CPPFLAGS $X_CFLAGS" 5772 5773 if test "x$x_includes" = "x"; then 5774 x_includes="default_x_includes" 5775 fi 5776 if test "x$x_libraries" = "x"; then 5777 x_libraries="default_x_libraries" 5778 fi 5779 dnl The variables $x_libraries and $x_includes are set. 5780 if test -z "$x_libraries"; then 5781 AC_MSG_ERROR([No X libraries found]) # Exit 5782 fi 5783 if test -z "$x_includes"; then 5784 AC_MSG_ERROR([No X includes found]) # Exit 5785 fi 5786 CFLAGS=$X_CFLAGS 5787 LDFLAGS="$X_LDFLAGS $X_LIBS" 5788 AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", [AC_MSG_ERROR([X Development libraries not found])]) 5789 dnl Check if the XauDisposeAuth symbol is provided by libXau. 5790 AC_CHECK_LIB(Xau, XauDisposeAuth, XAU_LIBS="-lXau", []) 5791else 5792 x_includes="no_x_includes" 5793 x_libraries="no_x_libraries" 5794fi 5795if test -z "$x_includes"; then 5796 x_includes="no_x_includes" 5797fi 5798if test -z "$x_libraries"; then 5799 x_libraries="no_x_libraries" 5800fi 5801if test "$x_includes" = "default_x_includes"; then 5802 XINC="/usr/include" 5803else 5804 XINC="$x_includes" 5805fi 5806AC_SUBST(XINC) 5807if test "$x_libraries" = "default_x_libraries"; then 5808 XLIB=`$PKG_CONFIG --variable=libdir x11` 5809 if test "x$XLIB" = x; then 5810 XLIB="/usr/lib" 5811 fi 5812else 5813 XLIB="$x_libraries" 5814fi 5815AC_SUBST(XLIB) 5816AC_SUBST(XAU_LIBS) 5817 5818dnl =================================================================== 5819dnl Check if fontconfig/fontconfig.h is available 5820dnl =================================================================== 5821if test "$ENABLE_FONTCONFIG" = "TRUE" ; then 5822 AC_CHECK_HEADER(fontconfig/fontconfig.h, [], 5823 [AC_MSG_ERROR([fontconfig/fontconfig.h could not be found. libfontconfig1-dev or fontconfig???-devel missing?])], []) 5824 AC_MSG_CHECKING([whether fontconfig is >= 2.2.0]) 5825 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 5826#include <fontconfig/fontconfig.h> 5827 5828int main(int argc, char **argv) { 5829 if(FC_MAJOR > 2 || (FC_MAJOR == 2 && FC_MINOR >= 2)) return 0; 5830 else return 1; 5831} 5832]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, fontconfig >= 2.2.0 needed])],[]) 5833fi 5834 5835dnl =================================================================== 5836dnl Check for system Xrender 5837dnl =================================================================== 5838AC_MSG_CHECKING([whether to link to Xrender]) 5839if test -n "$enable_xrender_link" -a "$enable_xrender_link" != "no"; then 5840 AC_MSG_RESULT([yes]) 5841 XRENDER_LINK=YES 5842 with_system_xrender_headers=yes 5843else 5844 AC_MSG_RESULT([no, dynamically open it]) 5845 XRENDER_LINK=NO 5846fi 5847AC_MSG_CHECKING([which Xrender headers to use]) 5848if test -n "$with_system_xrender_headers" -o -n "$with_system_headers" && \ 5849 test "$with_system_xrender_headers" != "no"; then 5850 AC_MSG_RESULT([external]) 5851 SYSTEM_XRENDER_HEADERS=YES 5852 AC_CHECK_HEADER(X11/extensions/Xrender.h, [], 5853 [AC_MSG_ERROR(Xrender not found. install X)], []) 5854else 5855 AC_MSG_RESULT([internal]) 5856 SYSTEM_XRENDER_HEADERS=NO 5857 BUILD_TYPE="$BUILD_TYPE X11_EXTENSIONS" 5858fi 5859if test "$XRENDER_LINK" = "YES"; then 5860 AC_CHECK_LIB(Xrender, XRenderQueryVersion, [], 5861 [AC_MSG_ERROR(libXrender not found or functional)], []) 5862fi 5863AC_SUBST(SYSTEM_XRENDER_HEADERS) 5864AC_SUBST(XRENDER_LINK) 5865 5866dnl =================================================================== 5867dnl Check for XRandr 5868dnl =================================================================== 5869AC_MSG_CHECKING([whether to enable RandR support]) 5870if test "$test_randr" = "yes" -a \( "$enable_randr" = "yes" -o "$enable_randr" = "TRUE" \) ; then 5871 if test -z "$enable_randr_link" -o "$enable_randr_link" = "no"; then 5872 XRANDR_DLOPEN="TRUE" 5873 AC_MSG_RESULT([resorting to dlopen libXrandr at runtime]) 5874 else 5875 XRANDR_DLOPEN="FALSE" 5876 PKG_CHECK_MODULES(XRANDR, xrandr >= 1.2, ENABLE_RANDR="TRUE", ENABLE_RANDR="") 5877 if test "$ENABLE_RANDR" != "TRUE"; then 5878 AC_CHECK_HEADER(X11/extensions/Xrandr.h, [], 5879 [AC_MSG_ERROR([X11/extensions/Xrandr.h could not be found. X11 dev missing?])], []) 5880 XRANDR_CFLAGS=" " 5881 AC_CHECK_LIB(Xrandr, XRRQueryExtension, [], 5882 [ AC_MSG_ERROR(libXrandr not found or functional) ], []) 5883 XRANDR_LIBS="-lXrandr " 5884 ENABLE_RANDR="TRUE" 5885 AC_MSG_RESULT([enabling RandR support]) 5886 fi 5887 fi 5888else 5889 ENABLE_RANDR="" 5890 AC_MSG_RESULT([no]) 5891fi 5892AC_SUBST(XRANDR_DLOPEN) 5893AC_SUBST(XRANDR_CFLAGS) 5894AC_SUBST(XRANDR_LIBS) 5895AC_SUBST(ENABLE_RANDR) 5896 5897dnl =================================================================== 5898dnl Check for system nss 5899dnl =================================================================== 5900AC_MSG_CHECKING([which libnss to use]) 5901if test -n "$with_system_nss" -o -n "$with_system_libs" && test "$with_system_nss" != "no"; then 5902 AC_MSG_RESULT([external]) 5903 PKG_CHECK_MODULES( NSS, nss ) 5904 SYSTEM_NSS=YES 5905else 5906 AC_MSG_RESULT([internal]) 5907 SYSTEM_NSS=NO 5908 BUILD_TYPE="$BUILD_TYPE NSS" 5909fi 5910AC_SUBST(SYSTEM_NSS) 5911AC_SUBST(NSS_CFLAGS) 5912AC_SUBST(NSS_LIBS) 5913 5914dnl =================================================================== 5915dnl Check for system redland 5916dnl =================================================================== 5917AC_MSG_CHECKING([which redland library to use]) 5918if test -n "$with_system_redland" -o -n "$with_system_libs" && \ 5919 test "$with_system_redland" != "no"; then 5920 AC_MSG_RESULT([external]) 5921 SYSTEM_REDLAND=YES 5922 dnl versions before 1.0.8 write RDF/XML that is useless for ODF (@xml:base) 5923 PKG_CHECK_MODULES(REDLAND, redland >= 1.0.8) 5924else 5925 AC_MSG_RESULT([internal]) 5926 BUILD_TYPE="$BUILD_TYPE REDLAND" 5927 SYSTEM_REDLAND=NO 5928fi 5929AC_SUBST(SYSTEM_REDLAND) 5930AC_SUBST(REDLAND_CFLAGS) 5931AC_SUBST(REDLAND_LIBS) 5932 5933dnl =================================================================== 5934dnl Check for hunspell 5935dnl =================================================================== 5936AC_MSG_CHECKING([whether to build the Spell Checking component]) 5937ENABLE_HUNSPELL= 5938 5939if test "x$enable_hunspell" != "xno" ; then 5940 AC_MSG_CHECKING([which libhunspell to use]) 5941 if test -n "$with_system_hunspell" -o -n "$with_system_libs" && \ 5942 test "$with_system_hunspell" != "no"; then 5943 AC_MSG_RESULT([external]) 5944 SYSTEM_HUNSPELL=YES 5945 AC_LANG_PUSH([C++]) 5946 PKG_CHECK_MODULES(HUNSPELL, hunspell, HUNSPELL_PC="TRUE", HUNSPELL_PC="" ) 5947 if test "$HUNSPELL_PC" != "TRUE"; then 5948 AC_CHECK_HEADER(hunspell.hxx, [], 5949 [AC_CHECK_HEADER(hunspell/hunspell.hxx, [ HUNSPELL_CFLAGS=-I/usr/include/hunspell ], 5950 [AC_MSG_ERROR(hunspell headers not found.)], []) 5951 ], []) 5952 AC_CHECK_LIB(hunspell, main, [], 5953 [ AC_MSG_ERROR(hunspell library not found.) ], []) 5954 HUNSPELL_LIBS=-lhunspell 5955 fi 5956 AC_LANG_POP([C++]) 5957 else 5958 AC_MSG_RESULT([internal]) 5959 SYSTEM_HUNSPELL=NO 5960 BUILD_TYPE="$BUILD_TYPE HUNSPELL" 5961 fi 5962 ENABLE_HUNSPELL=YES 5963 AC_SUBST(SYSTEM_HUNSPELL) 5964 AC_SUBST(HUNSPELL_CFLAGS) 5965 AC_SUBST(HUNSPELL_LIBS) 5966else 5967 AC_MSG_RESULT([no]) 5968fi 5969AC_SUBST(ENABLE_HUNSPELL) 5970 5971dnl =================================================================== 5972dnl Checking for libhyphen 5973dnl =================================================================== 5974AC_MSG_CHECKING([whether to build the Hyphenator component]) 5975ENABLE_HYPHEN= 5976 5977if test "x$enable_hyphen" != "xno" ; then 5978 AC_MSG_CHECKING([which libhyphen to use]) 5979 if test -n "$with_system_hyphen" -o -n "$with_system_libs" && \ 5980 test "$with_system_hyphen" != "no"; then 5981 AC_MSG_RESULT([external]) 5982 SYSTEM_HYPH=YES 5983 AC_CHECK_HEADER(hyphen.h, [], 5984 [ AC_MSG_ERROR(libhyphen headers not found.)], []) 5985 AC_CHECK_MEMBER(struct _HyphenDict.cset, [], 5986 [ AC_MSG_ERROR(no. You are sure you have libhyphen headers?)], 5987 [#include <hyphen.h>]) 5988 AC_CHECK_LIB(hyphen, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyphen], 5989 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5990 if test -z "$HYPHEN_LIB"; then 5991 AC_CHECK_LIB(hyph, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyph], 5992 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5993 fi 5994 if test -z "$HYPHEN_LIB"; then 5995 AC_CHECK_LIB(hnj, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhnj], 5996 [ AC_MSG_ERROR(libhyphen not found or too old.)], []) 5997 fi 5998 else 5999 AC_MSG_RESULT([internal]) 6000 SYSTEM_HYPH=NO 6001 BUILD_TYPE="$BUILD_TYPE HYPHEN" 6002 fi 6003 ENABLE_HYPHEN=YES 6004 AC_SUBST(SYSTEM_HYPH) 6005 AC_SUBST(HYPHEN_LIB) 6006else 6007 AC_MSG_RESULT([no]) 6008fi 6009AC_SUBST(ENABLE_HYPHEN) 6010 6011 6012#dnl =================================================================== 6013#dnl Check whether we are allowed to bundle dictionaries and whether 6014#dnl hunspell is available. 6015#dnl =================================================================== 6016ENABLE_BUNDLED_DICTIONARIES= 6017if test "x$enable_bundled_dictionaries" != "xno" -a "x$ENABLE_HUNSPELL" = "xYES"; then 6018 ENABLE_BUNDLED_DICTIONARIES=YES 6019fi 6020AC_SUBST(ENABLE_BUNDLED_DICTIONARIES) 6021 6022 6023 6024dnl =================================================================== 6025dnl Checking for mythes 6026dnl =================================================================== 6027AC_MSG_CHECKING([which mythes to use]) 6028if test -n "$with_system_mythes" -o -n "$with_system_libs" && \ 6029 test "$with_system_mythes" != "no"; then 6030 AC_MSG_RESULT([external]) 6031 SYSTEM_MYTHES=YES 6032 AC_LANG_PUSH([C++]) 6033 PKG_CHECK_MODULES(MYTHES, mythes, MYTHES_PKGCONFIG=yes, MYTHES_PKGCONFIG=no) 6034 if test "$MYTHES_PKGCONFIG" = "no"; then 6035 AC_CHECK_HEADER(mythes.hxx, [], 6036 [ AC_MSG_ERROR(mythes.hxx headers not found.)], []) 6037 AC_CHECK_LIB(mythes-1.2, main, [], 6038 [ MYTHES_FOUND=no], []) 6039 if test "$MYTHES_FOUND" = "no"; then 6040 AC_CHECK_LIB(mythes, main, [MYTHES_FOUND=yes], 6041 [ MYTHES_FOUND=no], []) 6042 fi 6043 if test "$MYTHES_FOUND" = "no"; then 6044 AC_MSG_ERROR([mythes library not found!.]) 6045 fi 6046 fi 6047 AC_LANG_POP([C++]) 6048else 6049 AC_MSG_RESULT([internal]) 6050 SYSTEM_MYTHES=NO 6051 BUILD_TYPE="$BUILD_TYPE MYTHES" 6052fi 6053AC_SUBST(SYSTEM_MYTHES) 6054AC_SUBST(MYTHES_CFLAGS) 6055AC_SUBST(MYTHES_LIBS) 6056 6057 6058dnl =================================================================== 6059dnl Checking for libtextcat 6060dnl =================================================================== 6061AC_MSG_CHECKING([which libtextcat to use]) 6062if test -n "$with_system_libtextcat" && test "$with_system_libtextcat" != "no"; then 6063 AC_MSG_RESULT([external]) 6064 SYSTEM_LIBTEXTCAT=YES 6065 AC_CHECK_HEADER(libtextcat/textcat.h, [], 6066 [ AC_MSG_ERROR(libtextcat headers not found.)], []) 6067 AC_CHECK_LIB(textcat, special_textcat_Init, , 6068 [ AC_MSG_ERROR(libtextcat library not found or not suitable. libtextcat typically needs to be patched)], []) 6069else 6070 AC_MSG_RESULT([internal]) 6071 SYSTEM_LIBTEXTCAT=NO 6072 BUILD_TYPE="$BUILD_TYPE LIBTEXTCAT" 6073fi 6074AC_SUBST(SYSTEM_LIBTEXTCAT) 6075 6076AC_MSG_CHECKING([which libtextcat data directory to use]) 6077if test -n "$with_system_libtextcat_data" && test "$with_system_libtextcat_data" != "no"; then 6078 if test "$with_system_libtextcat_data" = "yes"; then 6079 SYSTEM_LIBTEXTCAT_DATA=file:///usr/share/libtextcat 6080 else 6081 SYSTEM_LIBTEXTCAT_DATA=file://$with_system_libtextcat_data 6082 fi 6083 AC_MSG_RESULT([$SYSTEM_LIBTEXTCAT_DATA]) 6084else 6085 AC_MSG_RESULT([internal]) 6086 BUILD_TYPE="$BUILD_TYPE LIBTEXTCATDATA" 6087fi 6088AC_SUBST(SYSTEM_LIBTEXTCAT_DATA) 6089 6090dnl *************************************** 6091dnl testing libc version for Linux... 6092dnl *************************************** 6093if test "$_os" = "Linux"; then 6094 AC_MSG_CHECKING([whether libc is >= 2.1.1]) 6095 exec 6>/dev/null # no output 6096 AC_CHECK_LIB(c, gnu_get_libc_version, HAVE_LIBC=yes; export HAVE_LIBC) 6097 exec 6>&1 # output on again 6098 if test "$HAVE_LIBC"; then 6099 AC_MSG_RESULT([yes]) 6100 else 6101 AC_MSG_ERROR([no, upgrade libc]) 6102 fi 6103fi 6104 6105if test "$_os" != "WNT"; then 6106 AC_CHECK_FUNCS(getopt, HAVE_GETOPT=YES, [HAVE_GETOPT=NO]) 6107 AC_CHECK_FUNCS(readdir_r, HAVE_READDIR_R=YES, [HAVE_READDIR_R=NO]) 6108 if test "$HAVE_GETOPT" = "YES" -a "$HAVE_READDIR_R" = "YES"; then 6109 SYSTEM_LIBC=YES 6110 fi 6111else 6112 HAVE_GETOPT=NO 6113 HAVE_READDIR_R=NO 6114 SYSTEM_LIBC=YES 6115fi 6116AC_SUBST(HAVE_GETOPT) 6117AC_SUBST(HAVE_READDIR_R) 6118AC_SUBST(SYSTEM_LIBC) 6119 6120dnl ========================================= 6121dnl Check for the Microsoft Platform SDK. 6122dnl ========================================= 6123dnl FIXME: I don't know yet if PSDK works with MinGW, keep it until I know better, 6124dnl and add "-a \( "$WITH_MINGWIN" != "yes" \)" then 6125if test \( "$_os" = "WINNT" \) -a \( -z "$MSVC_MODERN" \) ; then 6126 AC_MSG_CHECKING([for PSDK files]) 6127 if test -z "$with_psdk_home"; then 6128 # This first line will detect a February 2003 Microsoft Platform SDK 6129 PSDK_HOME=`$OOWINTOOL --psdk-home` 6130 # But there might be also an April 2005 PSDK, unfortunately MS changed 6131 # the registry entry. (we prefer the old version!?) 6132 if test -z "$PSDK_HOME"; then 6133 PSDK_HOME=`cat /proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MicrosoftSDK/InstalledSDKs/*/Install\ Dir 2> /dev/null | tr '\000' '\n' | head -n 1` 6134 fi 6135 # normalize if found 6136 if test -n "$PSDK_HOME"; then 6137 PSDK_HOME=`cygpath -d "$PSDK_HOME"` 6138 PSDK_HOME=`cygpath -u "$PSDK_HOME"` 6139 fi 6140 else 6141 PSDK_HOME=`cygpath -u "$with_psdk_home"` 6142 fi 6143 # Remove a possible trailing backslash 6144 PSDK_HOME=`echo $PSDK_HOME | $SED 's/\/$//'` 6145 # Problem with current PSDK (iz 49865) 6146 if test -f "$PSDK_HOME/Lib/libcp.lib"; then 6147 AC_MSG_ERROR([ 6148 6149Some modules do not build correctly with MS Platform SDK - April 2005 6150Edition if the library ($PSDK_HOME/Lib/libcp.lib) is found. 6151Remove/rename/backup that file and restart configure. Details about this 6152problem can be found in issue 49856.]) 6153 fi 6154# Windows SDK has different headers 6155 if test \( -f "$PSDK_HOME/Include/adoint.h" \) \ 6156 -a \( -f "$PSDK_HOME/Include/SqlUcode.h" \) \ 6157 -a \( -f "$PSDK_HOME/Include/usp10.h" \); then 6158 HAVE_PSDK_H="yes" 6159 else 6160 HAVE_PSDK_H="no" 6161 fi 6162 if test -f "$PSDK_HOME/lib/unicows.lib"; then 6163 HAVE_PSDK_LIB="yes" 6164 else 6165 HAVE_PSDK_LIB="no" 6166 fi 6167 if test "$HAVE_PSDK_H" = "no" -o "$HAVE_PSDK_LIB" = "no"; then 6168 AC_MSG_ERROR([Some (all?) PSDK files not found, please check if all needed Platform SDKs 6169are installed or use --with-psdk-home .]) 6170 fi 6171 if test ! -x "$PSDK_HOME/bin/msiinfo.exe" \ 6172 -o ! -x "$PSDK_HOME/bin/msidb.exe" \ 6173 -o ! -x "$PSDK_HOME/bin/uuidgen.exe" \ 6174 -o ! -x "$PSDK_HOME/bin/msitran.exe" ; then 6175 AC_MSG_ERROR([Some (all) files of the Windows Installer SDK are missing, please install.]) 6176 fi 6177 AC_MSG_RESULT([SDK files found ...)]) 6178dnl Check if this is the right SDK. 6179 if echo $PSDK_HOME | $GREP "v6.1" >/dev/null 2>/dev/null; then 6180 AC_MSG_RESULT([Found Windows SDK 6.1 ($PSDK_HOME)]) 6181 WINDOWS_VISTA_PSDK=TRUE 6182 elif echo $PSDK_HOME | $GREP "v6.0" >/dev/null 2>/dev/null; then 6183 AC_MSG_RESULT([Found Windows SDK 6.0 ($PSDK_HOME)]) 6184 WINDOWS_VISTA_PSDK=TRUE 6185 elif echo $PSDK_HOME | $GREP "v7.0" >/dev/null 2>/dev/null; then 6186 AC_MSG_RESULT([Found Windows SDK 7.0 ($PSDK_HOME)]) 6187 WINDOWS_VISTA_PSDK=TRUE 6188 else 6189 AC_MSG_RESULT([Found Legacy Windows Platform SDK ($PSDK_HOME)]) 6190 fi 6191fi 6192AC_SUBST(PSDK_HOME) 6193AC_SUBST(WINDOWS_VISTA_PSDK) 6194 6195dnl ========================================= 6196dnl Check for the Microsoft DirectX SDK. 6197dnl ========================================= 6198if test \( "$_os" = "WINNT" \) ; then 6199 AC_MSG_CHECKING([for DirectX SDK files]) 6200 if test -z "$with_directx_home"; then 6201 dnl A standard installation of the DirectX SDK sets $DXSDK_DIR 6202 if test -n "$DXSDK_DIR"; then 6203 DIRECTXSDK_HOME=`cygpath -d "$DXSDK_DIR"` 6204 DIRECTXSDK_HOME=`cygpath -u "$DIRECTXSDK_HOME"` 6205 fi 6206 # At this point $DIRECTXSDK_HOME might still be undefined. This will lead to 6207 # the "DirectX SDK files not found" error later 6208 else 6209 DIRECTXSDK_HOME=`cygpath -u "$with_directx_home"` 6210 fi 6211 # Remove a possible trailing backslash 6212 DIRECTXSDK_HOME=`echo $DIRECTXSDK_HOME | $SED 's/\/$//'` 6213 6214 if test -f "$DIRECTXSDK_HOME/Include/ddraw.h" ; then 6215 HAVE_DIRECTDRAW_H="yes" 6216 else 6217 HAVE_DIRECTDRAW_H="no" 6218 fi 6219 if test -f "$DIRECTXSDK_HOME/Include/d3d9.h" ; then 6220 HAVE_DIRECTXSDK_H="yes" 6221 else 6222 HAVE_DIRECTXSDK_H="no" 6223 fi 6224 6225 # MS changed the location of the libraries with dec 2004 directx sdk 6226 if test -d "$DIRECTXSDK_HOME/lib/x86" ; then 6227 DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib/x86" 6228 else 6229 DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib" 6230 fi 6231 if test -f "$DIRECTXSDK_LIB/ddraw.lib" ; then 6232 HAVE_DIRECTDRAW_LIB="yes" 6233 else 6234 HAVE_DIRECTDRAW_LIB="no" 6235 fi 6236 if test -f "$DIRECTXSDK_LIB/d3d9.lib" ; then 6237 HAVE_DIRECTXSDK_LIB="yes" 6238 else 6239 HAVE_DIRECTXSDK_LIB="no" 6240 fi 6241 6242 if test "$HAVE_DIRECTDRAW_H" = "yes" -a "$HAVE_DIRECTDRAW_LIB" = "yes" ; then 6243 ENABLE_DIRECT_DRAW="TRUE" 6244 fi 6245 if test "$HAVE_DIRECTXSDK_H" = "yes" -a "$HAVE_DIRECTXSDK_LIB" = "yes" ; then 6246 HAVE_DIRECTXSDK="yes" 6247 else 6248 HAVE_DIRECTXSDK="no" 6249 fi 6250 6251 if test -n "$ENABLE_DIRECTX"; then 6252 if test "$HAVE_DIRECTDRAW" = "yes" -o "$HAVE_DIRECTXSDK" = "yes" ; then 6253 AC_MSG_RESULT([found]) 6254 else 6255 AC_MSG_ERROR([DirectX SDK files not found, please use --with-directx-home or --disable-directx.]) 6256 fi 6257 else 6258 DIRECTXSDK_HOME="" 6259 AC_MSG_RESULT([disabled]) 6260 fi 6261fi 6262AC_SUBST(ENABLE_DIRECT_DRAW) 6263AC_SUBST(DIRECTXSDK_HOME) 6264AC_SUBST(DIRECTXSDK_LIB) 6265 6266 6267dnl ============================================ 6268dnl Check for ATL and MFC 6269dnl ============================================ 6270if test \( "$_os" = "WINNT" \) ; then 6271 AC_MSG_CHECKING([for ATL and MFC]) 6272 if test "$DISABLE_ATL" = "TRUE"; then 6273 AC_MSG_RESULT([ATL is disabled, nothing to check]) 6274 else 6275 AC_MSG_NOTICE([testing ATL/MFC libs and includes]) 6276 if test -z "$with_atl_include_dir"; then 6277 ATL_INCLUDE=$COMPATH/atlmfc/include 6278 else 6279 ATL_INCLUDE=`cygpath -u "$with_atl_include_dir"` 6280 fi 6281 if test -z "$with_atl_lib_dir"; then 6282 ATL_LIB=$COMPATH/atlmfc/lib 6283 ATL_LIB_X64=$COMPATH/atlmfc/lib/amd64 6284 else 6285 ATL_LIB=`cygpath -u "$with_atl_lib_dir"` 6286 ATL_LIB_X64=$ATL_LIB/../amd64 6287 fi 6288 if test -z "$with_mfc_include_dir"; then 6289 MFC_INCLUDE=$COMPATH/atlmfc/include 6290 else 6291 MFC_INCLUDE=`cygpath -u "$with_mfc_include_dir"` 6292 fi 6293 if test -z "$with_mfc_lib_dir"; then 6294 MFC_LIB=$COMPATH/atlmfc/lib 6295 else 6296 MFC_LIB=`cygpath -u "$with_mfc_lib_dir"` 6297 fi 6298 6299 ATL_INCLUDE=`echo $ATL_INCLUDE | $SED 's/\/$//'` 6300 ATL_LIB=`echo $ATL_LIB | $SED 's/\/$//'` 6301 ATL_LIB_X64=`echo $ATL_LIB_X64 | $SED 's/\/$//'` 6302 MFC_INCLUDE=`echo $MFC_INCLUDE | $SED 's/\/$//'` 6303 MFC_LIB=`echo $MFC_LIB | $SED 's/\/$//'` 6304 6305 AC_MSG_NOTICE([looking for atlbase.h in "$ATL_INCLUDE"]) 6306 if test -f "$ATL_INCLUDE/atlbase.h"; then 6307 HAVE_ATL_H="yes" 6308 else 6309 HAVE_ATL_H="no" 6310 fi 6311 AC_MSG_NOTICE([found atlbase.h in "$ATL_INCLUDE"? "$HAVE_ATL_H"]) 6312 6313 AC_MSG_NOTICE([looking for afx.h in "$MFC_INCLUDE"]) 6314 if test -f "$MFC_INCLUDE/afx.h"; then 6315 HAVE_MFC_H="yes" 6316 else 6317 HAVE_MFC_H="no" 6318 fi 6319 AC_MSG_NOTICE([found afx.h in "$MFC_INCLUDE"? "$HAVE_MFC_H"]) 6320 6321 AC_MSG_NOTICE([looking for atls.lib in "$ATL_LIB"]) 6322 if test -f "$ATL_LIB/atls.lib"; then 6323 HAVE_ATL_LIB="yes" 6324 AC_MSG_NOTICE([looking for atlthunk.lib in "$ATL_LIB"]) 6325 if test -f "$ATL_LIB/atlthunk.lib"; then 6326 HAVE_ATLTHUNK="YES" 6327 else 6328 HAVE_ATLTHUNK="NO" 6329 fi 6330 AC_MSG_NOTICE([found atlthunk.lib in "$ATL_LIB"? "$HAVE_ATLTHUNK"]) 6331 else 6332 HAVE_ATL_LIB="no" 6333 fi 6334 AC_MSG_NOTICE([found atls.lib in "$ATL_LIB"? "$HAVE_ATL_LIB"]) 6335 6336 dnl TODO check also MFC libraries, they seem to have different names 6337 dnl mfc42.lib mfc90.lib 6338 if test -d "$MFC_LIB"; then 6339 HAVE_MFC_LIB="yes" 6340 else 6341 HAVE_MFC_LIB="no" 6342 fi 6343 6344 if test "$HAVE_ATL_H" = "no" -o "$HAVE_MFC_H" = "no" -o "$HAVE_ATL_LIB" = "no" -o "$HAVE_MFC_LIB" = "no"; then 6345 ATL_INCLUDE= 6346 ATL_LIB= 6347 ATL_LIB_X64= 6348 MFC_INCLUDE= 6349 MFC_LIB= 6350 HAVE_ATL_LIB= 6351 dnl TODO shouldn't this be an error? 6352 DISABLE_ACTIVEX="TRUE" 6353 DISABLE_ATL="TRUE" 6354 AC_MSG_RESULT([ATL/MFC disabled]) 6355 else 6356 ATL_INCLUDE=`cygpath -dm "$ATL_INCLUDE"` 6357 ATL_LIB=`cygpath -dm "$ATL_LIB"` 6358 ATL_LIB_X64=`cygpath -dm "$ATL_LIB_X64"` 6359 MFC_INCLUDE=`cygpath -dm "$MFC_INCLUDE"` 6360 MFC_LIB=`cygpath -dm "$MFC_LIB"` 6361 AC_MSG_RESULT([ATL/MFC enabled]) 6362 fi 6363 fi 6364fi 6365AC_SUBST(ATL_INCLUDE) 6366AC_SUBST(ATL_LIB) 6367AC_SUBST(ATL_LIB_X64) 6368AC_SUBST(HAVE_ATLTHUNK) 6369AC_SUBST(MFC_INCLUDE) 6370AC_SUBST(MFC_LIB) 6371 6372 6373dnl ============================================ 6374dnl Check for Nullsoft Scriptable Install System 6375dnl ============================================ 6376NSIS_PATH="" 6377if test "$_os" = "WINNT" ; then 6378 AC_MSG_CHECKING([for NSIS]) 6379 AC_PATH_PROG(NSIS_PATH, nsis.exe) 6380 if test -n "$NSIS_PATH"; then 6381 NSIS_PATH=`dirname "$NSIS_PATH"` 6382 fi 6383 if test -n "$with_nsis_path"; then 6384 with_nsis_path=`cygpath -u "$with_nsis_path"` 6385 fi 6386 if test -e "$with_nsis_path/nsis.exe"; then 6387 NSIS_PATH="$with_nsis_path" 6388 fi 6389 nsistest=`$OOWINTOOL --nsis-dir`; 6390 if test -x "$nsistest/nsis.exe"; then 6391 NSIS_PATH="$nsistest" 6392 fi 6393 if test -z "$NSIS_PATH"; then 6394 AC_MSG_WARN([NSIS not found, no self contained installer will be build.]) 6395 echo "NSIS not found, no self contained installer will be build." >> warn 6396 else 6397 NSIS_PATH=`cygpath -d "$NSIS_PATH"` 6398 NSIS_PATH=`cygpath -u "$NSIS_PATH"` 6399 AC_MSG_RESULT([found ($NSIS_PATH)]) 6400 AC_MSG_CHECKING([whether NSIS version is >= 3.*]) 6401 nsis_version_string=`"$NSIS_PATH/makensis.exe" /VERSION | $SED -e s/^v//i` 6402 nsis_version_major=`echo $nsis_version_string | cut -d. -f1` 6403 nsis_version_minor=`echo $nsis_version_string | cut -d. -f2` 6404 if test "$nsis_version_major" -ge "3"; then 6405 AC_MSG_RESULT([found NSIS $nsis_version_major.$nsis_version_minor >= 3.*]) 6406 AC_MSG_CHECKING([whether NSIS was compiled with Unicode support]) 6407 if echo `"$NSIS_PATH/makensis.exe" /HDRINFO` | $EGREP "\bNSIS_UNICODE_MAKENSIS\b" 2>&1 >/dev/null; then 6408 AC_MSG_RESULT([NSIS version compiled with Unicode support.]) 6409 else 6410 NSIS_PATH="" 6411 AC_MSG_WARN([NSIS version compiled without Unicode support, no self contained installer will be build.]) 6412 fi 6413 else 6414 NSIS_PATH="" 6415 AC_MSG_WARN([NSIS version found is < 3.*, no self contained installer will be build.]) 6416 fi 6417 fi 6418fi 6419AC_SUBST(NSIS_PATH) 6420 6421dnl *************************************** 6422dnl testing bison and flex exist 6423dnl *************************************** 6424AC_PATH_PROG(BISON, bison) 6425if test -z "$BISON"; then 6426 AC_MSG_ERROR([no bison found in \$PATH, install bison]) 6427else 6428 AC_MSG_CHECKING([the bison version]) 6429 _bison_version=`$BISON --version | $GREP GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`; 6430 _bison_longver=`echo $_bison_version | $AWK -F. '{ print \$1*1000+\$2}'` 6431 # Accept newer than 1.875 or older(equal) than 1.75 6432 if test "$_bison_longver" -ge 1875 -o "$_bison_longver" -le 1075; then 6433 if test "$_bison_version" = "1.875" ; then 6434 AC_MSG_WARN([suspect ($BISON $_bison_version)]) 6435 echo "Suspect ($BISON $_bison_version) suggest upgrade" >> warn 6436 else 6437 AC_MSG_RESULT([checked ($BISON $_bison_version)]) 6438 fi 6439 else 6440 AC_MSG_ERROR([failed ($BISON $_bison_version need 1.875+ (or 1.75 and older))]) 6441 fi 6442fi 6443AC_PATH_PROG(FLEX, flex) 6444if test -z "$FLEX"; then 6445 AC_MSG_ERROR([no flex found in \$PATH, install flex]) 6446fi 6447dnl *************************************** 6448dnl testing that patch exists 6449dnl *************************************** 6450AC_PATH_PROG(PATCH, patch) 6451if test -z "$PATCH"; then 6452 AC_MSG_ERROR([\"patch\" not found in \$PATH, install the development tool named\"patch"\]) 6453fi 6454 6455dnl On Solaris, FreeBSD or MacOS X, check if --with-gnu-patch was used 6456if test "$_os" = "SunOS" -o "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then 6457 if test -z "$with_gnu_patch"; then 6458 GNUPATCH=$PATCH 6459 else 6460 if test -x "$with_gnu_patch"; then 6461 GNUPATCH=$with_gnu_patch 6462 else 6463 AC_MSG_ERROR([--with-gnu-patch did not point to an executable]) 6464 fi 6465 fi 6466 6467 AC_MSG_CHECKING([whether $GNUPATCH is GNU patch]) 6468 if $GNUPATCH --version | $GREP "Free Software Foundation" >/dev/null 2>/dev/null; then 6469 AC_MSG_RESULT([yes]) 6470 else 6471 AC_MSG_ERROR([no, GNU patch needed. install or specify with --with-gnu-patch=/path/to/it]) 6472 fi 6473fi 6474 6475dnl We also need to check for --with-gnu-cp 6476 6477if test -z "$with_gnu_cp"; then 6478 # check the place where the GNU stuff is hidden on Solaris... 6479 if test -x /usr/gnu/bin/cp; then 6480 GNUCP=/usr/gnu/bin/cp 6481 else 6482 AC_PATH_PROGS(GNUCP, gnucp cp) 6483 fi 6484 if test -z $GNUCP; then 6485 AC_MSG_ERROR([Neither gnucp nor cp found. Install GNU cp and/or specify --with-gnu-cp=/path/to/it]) 6486 fi 6487else 6488 if test -x "$with_gnu_cp"; then 6489 GNUCP=$with_gnu_cp 6490 else 6491 AC_MSG_ERROR([--with-gnu-cp did not point to an executable]) 6492 fi 6493fi 6494 6495AC_MSG_CHECKING([whether $GNUCP is GNU cp from coreutils with preserve= support]) 6496if $GNUCP --version 2>/dev/null | $GREP "coreutils" >/dev/null 2>/dev/null; then 6497 AC_MSG_RESULT([yes]) 6498else 6499 AC_MSG_RESULT([no]) 6500 GNUCP='' 6501fi 6502 6503if test -z "$GNUCP"; then 6504 if test "$_os" = "SunOS"; then 6505 AC_MSG_ERROR([no, GNU cp from coreutils is needed. install or specify with --with-gnu-cp=/path/to/it]) 6506 else 6507 AC_MSG_RESULT([no GNU cp from coreutils found - using the system's cp command]) 6508 fi 6509fi 6510 6511AC_SUBST(GNUPATCH) 6512AC_SUBST(GNUCP) 6513 6514dnl *************************************** 6515dnl testing bash tools path on Windows 6516dnl *************************************** 6517if test "$_os" = "WINNT"; then 6518 CYGWIN_PATH="" 6519 AC_PATH_PROG(CYGWIN_PATH, bash) 6520 CYGWIN_PATH=`dirname "$CYGWIN_PATH"` 6521fi 6522if test -z "$CYGWIN_PATH"; then 6523 CYGWIN_PATH="NO_CYGWIN" 6524fi 6525AC_SUBST(CYGWIN_PATH) 6526 6527dnl *************************************** 6528dnl testing ml.exe assembler path 6529dnl *************************************** 6530if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 6531 dnl The 64 bit assembler is a different BINARY, not just a different copy: 6532 dnl ml.exe emits 32 bit objects and ml64.exe 64 bit ones, and the x64 6533 dnl toolset directory ships only the latter. Look for whichever one goes 6534 dnl with the target being built. 6535 if test "$BUILD_WIN64" = "TRUE" ; then 6536 ASM_EXE_NAME=ml64.exe 6537 else 6538 ASM_EXE_NAME=ml.exe 6539 fi 6540 AC_MSG_CHECKING([$ASM_EXE_NAME assembler path]) 6541 if test -n "$with_asm_home"; then 6542 with_asm_home=`cygpath -u "$with_asm_home"` 6543 fi 6544 if test ! -x "$with_asm_home/$ASM_EXE_NAME"; then 6545 AC_PATH_PROG(ML_EXE, $ASM_EXE_NAME) 6546 if test -z "$ML_EXE"; then 6547 if test -x "$with_cl_home/bin/$ASM_EXE_NAME"; then 6548 with_asm_home=$with_cl_home/bin 6549 AC_MSG_RESULT([found ($with_asm_home)]) 6550 elif test -x "$with_cl_home/$cl_subdirectory/$ASM_EXE_NAME"; then 6551 dnl A modern toolset keeps the assembler beside the compiler in the 6552 dnl split bin/Host<host>/<target> tree, and the target half matters: 6553 dnl the x86 directory has ml.exe, the x64 one has ml64.exe. Reusing 6554 dnl $cl_subdirectory is what keeps assembler and compiler on the same 6555 dnl target rather than merely on the same toolset. 6556 with_asm_home=$with_cl_home/$cl_subdirectory 6557 AC_MSG_RESULT([found ($with_asm_home)]) 6558 else 6559 AC_MSG_ERROR([Configure did not find $ASM_EXE_NAME assembler.]) 6560 fi 6561 else 6562 with_asm_home="ASM_IN_PATH" 6563 fi 6564 fi 6565 AC_MSG_RESULT([$ASM_HOME]) 6566else 6567 with_asm_home="NO_ASM_HOME" 6568fi 6569ASM_HOME="$with_asm_home" 6570AC_SUBST(ASM_HOME) 6571 6572dnl *************************************** 6573dnl testing nasm.exe assembler path 6574dnl *************************************** 6575if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes" -a "$SYSTEM_OPENSSL" = "NO"; then 6576 AC_MSG_CHECKING([nasm.exe assembler path]) 6577 if test -n "$with_nasm_home"; then 6578 with_nasm_home=`cygpath -u "$with_nasm_home"` 6579 fi 6580 if test ! -x "$with_nasm_home/nasm.exe"; then 6581 AC_PATH_PROG(NASM_EXE, nasm.exe) 6582 if test -z "$NASM_EXE"; then 6583 with_nasm_home="NO_NASM_HOME" 6584 AC_MSG_ERROR([NASM is required to build on Windows, please install or use --with-nasm-home],,) 6585 else 6586 with_nasm_home="NASM_IN_PATH" 6587 fi 6588 fi 6589 AC_MSG_RESULT([$NASM_HOME]) 6590else 6591 with_nasm_home="NO_NASM_HOME" 6592fi 6593NASM_HOME="$with_nasm_home" 6594AC_SUBST(NASM_HOME) 6595 6596dnl =================================================================== 6597dnl testing handle deprecated unzip switch 6598dnl =================================================================== 6599if test -z "$with_zip_home"; then 6600 with_zip_home="$with_unzip_home" 6601fi 6602dnl =================================================================== 6603dnl Zip will be found where you tell me to find it 6604dnl =================================================================== 6605if test -n "$with_zip_home" ; then 6606 if test "$_os" = "WINNT"; then 6607 with_zip_home=`cygpath -u "$with_zip_home"` 6608 fi 6609 ZIP="$with_zip_home/zip" 6610 UNZIP="$with_zip_home/unzip" 6611 ZIP_HOME="$with_zip_home" 6612else 6613 AC_PATH_PROG(ZIP, zip) 6614 AC_PATH_PROG(UNZIP, unzip) 6615 ZIP_HOME=`dirname "$ZIP"` 6616fi 6617dnl =================================================================== 6618dnl Zip must be available or else it is an error, all platforms 6619dnl =================================================================== 6620if test -z "$ZIP" -o -z "$UNZIP"; then 6621 AC_MSG_ERROR([Zip/Unzip are required to build, please install or use --with-zip-home],,) 6622fi 6623if "$ZIP" -FS < /dev/null 2>&1 | $EGREP "no such option: S" > /dev/null; then 6624 AC_MSG_ERROR([Zip version 3.0 or newer is required to build, please install or use --with-zip-home],,) 6625fi 6626 6627dnl =================================================================== 6628dnl Zip must be a specific type for different build types. 6629dnl =================================================================== 6630if test "$_os" = "WINNT"; then 6631 if test -n "`$ZIP -h | $GREP -i WinNT`" ; then 6632AC_MSG_ERROR([$ZIP found in the path is not the required cygwin version of Info-ZIPs zip.exe.]) 6633 fi 6634fi 6635AC_SUBST(ZIP_HOME) 6636 6637dnl =================================================================== 6638dnl Windows builds need dbghelp.dll in external/dbghelp/ 6639dnl =================================================================== 6640if test "$_os" = "WINNT"; then 6641 AC_MSG_CHECKING([for dbghelp.dll]) 6642 if test -x ./external/dbghelp/dbghelp.dll; then 6643 AC_MSG_RESULT([found and executable]) 6644 else 6645 AC_MSG_ERROR([dbghelp.dll is missing in external/dbghelp/. 6646Get it from the Microsoft site and put it into external/dbghelp. 6647(Note: Microsoft seems to enjoy changing the exact location of this file. You 6648may have to search Microsoft's website.) Last time it was seen at: 6649<https://www.microsoft.com/downloads/release.asp?releaseid=30682>.]) 6650 fi 6651fi 6652 6653dnl =================================================================== 6654dnl Windows builds need vcredist_x*.exe in external/vcredist/ 6655dnl =================================================================== 6656WITH_VC_REDIST="" 6657 6658if test "$_os" = "WINNT"; then 6659 AC_MSG_CHECKING([for vcredist_x86.exe]) 6660 if test -x ./external/vcredist/vcredist_x86.exe; then 6661 AC_MSG_RESULT([found and executable]) 6662 else 6663 AC_MSG_ERROR([ vcredist_x86.exe is missing in external/vcredist/. 6664Get it from the Microsoft site and put it into external/vcredist. You can try 6665to download it from https://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.]) 6666 fi 6667 AC_MSG_CHECKING([for vcredist_x64.exe]) 6668 if test -x ./external/vcredist/vcredist_x64.exe; then 6669 AC_MSG_RESULT([found and executable]) 6670 else 6671 AC_MSG_ERROR([ vcredist_x64.exe is missing in external/vcredist/. 6672Get it from the Microsoft site and put it into external/vcredist. You can try 6673to download it from https://www.microsoft.com/download/en/search.aspx?q=redistributable%20package.]) 6674 fi 6675 WITH_VC_REDIST=YES 6676 AC_SUBST(WITH_VC_REDIST) 6677fi 6678 6679dnl =================================================================== 6680dnl Windows builds - use oowintool to copy CRT dlls and manifest 6681dnl =================================================================== 6682if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then 6683 if $OOWINTOOL --msvc-copy-dlls ./external/msvcp ; then 6684 : 6685 else 6686 AC_MSG_ERROR([oowintool failed to copy CRT]) 6687 fi 6688fi 6689 6690dnl =================================================================== 6691dnl Windows builds need gdiplus.dll in external/gdiplus/ 6692dnl =================================================================== 6693if test "$_os" = "WINNT"; then 6694 AC_MSG_CHECKING([for gdiplus.dll]) 6695 if test -x ./external/gdiplus/gdiplus.dll; then 6696 AC_MSG_RESULT([found and executable]) 6697 else 6698 AC_MSG_ERROR([gdiplus.dll is missing in external/gdiplus/. 6699Get it from the Microsoft site and put it into external/gdiplus. 6700You may have to search Microsoft's website. Last time it was seen at: 6701<https://www.microsoft.com/downloads/details.aspx?familyid=6A63AB9C-DF12-4D41-933C-BE590FEAA05A&displaylang=en>.]) 6702 fi 6703fi 6704 6705dnl =================================================================== 6706dnl Windows builds need msvcr100.dll in external/msvcp100/ 6707dnl =================================================================== 6708if test "$_os" = "WINNT"; then 6709 AC_MSG_CHECKING([for msvcr100.dll]) 6710 if test -x ./external/msvcp100/msvcr100.dll; then 6711 AC_MSG_RESULT([found and executable]) 6712 else 6713 AC_MSG_ERROR([msvcr100.dll is missing in external/msvcp100/. 6714Get it from the Microsoft Visual C++ 2010 Redistributable Package (x86), 6715from the Microsoft site and put it into external/msvcp100. 6716You may have to search Microsoft's website. Last time it was seen at: 6717<https://www.microsoft.com/en-us/download/search.aspx?q=Microsoft+Visual+C%2b%2b+2010+Redistributable>.]) 6718 fi 6719fi 6720 6721dnl =================================================================== 6722dnl Test which vclplugs have to be built. 6723dnl =================================================================== 6724AC_MSG_CHECKING([which VCLplugs shall be built]) 6725ENABLE_GTK="" 6726if test "x$enable_gtk" = "xyes"; then 6727 ENABLE_GTK="TRUE" 6728 R="gtk" 6729fi 6730AC_SUBST(ENABLE_GTK) 6731 6732ENABLE_KDE="" 6733if test "x$enable_kde" = "xyes"; then 6734 ENABLE_KDE="TRUE" 6735 R="$R kde" 6736fi 6737AC_SUBST(ENABLE_KDE) 6738 6739ENABLE_KDE4="" 6740if test "x$enable_kde4" = "xyes"; then 6741 ENABLE_KDE4="TRUE" 6742 R="$R kde4" 6743fi 6744AC_SUBST(ENABLE_KDE4) 6745 6746if test -z "$R"; then 6747 AC_MSG_RESULT([none]) 6748else 6749 AC_MSG_RESULT([$R]) 6750fi 6751 6752dnl =================================================================== 6753dnl GCONF check 6754dnl =================================================================== 6755 6756ENABLE_GCONF="" 6757AC_MSG_CHECKING([whether to enable GConf support]) 6758if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$_os" != "OS2" -a "$enable_gconf" = "yes"; then 6759 ENABLE_GCONF="TRUE" 6760 AC_MSG_RESULT([yes]) 6761 PKG_CHECK_MODULES( GCONF, gconf-2.0 ) 6762else 6763 AC_MSG_RESULT([no]) 6764fi 6765AC_SUBST(ENABLE_GCONF) 6766 6767dnl =================================================================== 6768dnl Gnome VFS check 6769dnl =================================================================== 6770 6771ENABLE_GNOMEVFS="" 6772AC_MSG_CHECKING([whether to enable GNOME VFS support]) 6773if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gnome_vfs" = "yes"; then 6774 ENABLE_GNOMEVFS="TRUE" 6775 AC_MSG_RESULT([yes]) 6776 PKG_CHECK_MODULES( GNOMEVFS, gnome-vfs-2.0 >= 2.6.0 ) 6777 if test "$ENABLE_GCONF" != "TRUE"; then 6778 PKG_CHECK_MODULES( GCONF, gconf-2.0 ) 6779 fi 6780else 6781 AC_MSG_RESULT([no]) 6782fi 6783AC_SUBST(ENABLE_GNOMEVFS) 6784 6785dnl =================================================================== 6786dnl Check whether the gtk 2.0 libraries are available. 6787dnl =================================================================== 6788 6789GTK_CFLAGS="" 6790GTK_LIBS="" 6791ENABLE_SYSTRAY_GTK="" 6792ENABLE_DBUS="" 6793if test "$test_gtk" = "yes"; then 6794 6795 if test "$ENABLE_GTK" = "TRUE" ; then 6796 PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.4 gdk-pixbuf-xlib-2.0 >= 2.2 ,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages])) 6797 PKG_CHECK_MODULES(GTHREAD, gthread-2.0,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the missing packages])) 6798 BUILD_TYPE="$BUILD_TYPE GTK" 6799 6800 if test "x$enable_systray" = "xyes"; then 6801 PKG_CHECK_MODULES(GTK_2_10,gtk+-2.0 >= 2.10.0, 6802 [ENABLE_SYSTRAY_GTK="TRUE" 6803 BUILD_TYPE="$BUILD_TYPE SYSTRAY_GTK"], 6804 [ENABLE_SYSTRAY_GTK=""]) 6805 fi 6806 6807 AC_MSG_CHECKING([whether to enable DBUS support]) 6808 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_dbus" = "yes"; then 6809 ENABLE_DBUS="TRUE" 6810 AC_MSG_RESULT([yes]) 6811 PKG_CHECK_MODULES( DBUS, dbus-glib-1 >= 0.70 ) 6812 else 6813 AC_MSG_RESULT([no]) 6814 fi 6815 6816 AC_MSG_CHECKING([whether to enable GIO support]) 6817 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gio" = "yes"; then 6818 if test "$ENABLE_GNOMEVFS" = "TRUE" ; then 6819 AC_MSG_ERROR([please use --enable-gio only together with --disable-gnome-vfs.]) 6820 fi 6821 ENABLE_GIO="TRUE" 6822 AC_MSG_RESULT([yes]) 6823 PKG_CHECK_MODULES( GIO, gio-2.0 ) 6824 else 6825 AC_MSG_RESULT([no]) 6826 fi 6827 6828 fi 6829 6830fi 6831AC_SUBST(ENABLE_GIO) 6832AC_SUBST(ENABLE_DBUS) 6833AC_SUBST(ENABLE_SYSTRAY_GTK) 6834AC_SUBST(GTK_CFLAGS) 6835AC_SUBST(GTK_LIBS) 6836AC_SUBST(GTHREAD_CFLAGS) 6837AC_SUBST(GTHREAD_LIBS) 6838 6839dnl =================================================================== 6840dnl Check whether the GStreamer libraries are available. 6841dnl =================================================================== 6842 6843GSTREAMER_CFLAGS="" 6844GSTREAMER_LIBS="" 6845ENABLE_GSTREAMER="" 6846 6847if test "$test_gstreamer" = "yes"; then 6848 AC_MSG_CHECKING([whether to build the GStreamer media backend]) 6849 if test "x$enable_gstreamer" != "xno" ; then 6850 PKG_CHECK_MODULES( GSTREAMER, gtk+-2.0 >= 2.4 gthread-2.0 gstreamer-1.0 gstreamer-video-1.0,,AC_MSG_ERROR([requirements to build the GStreamer media backend not met. Do not use --enable-gstreamer or install the missing packages])) 6851 ENABLE_GSTREAMER="TRUE" 6852 AC_MSG_RESULT([yes]) 6853 else 6854 AC_MSG_RESULT([no]) 6855 fi 6856fi 6857AC_SUBST(ENABLE_GSTREAMER) 6858AC_SUBST(GSTREAMER_CFLAGS) 6859AC_SUBST(GSTREAMER_LIBS) 6860 6861dnl =================================================================== 6862dnl Check the ARM target 6863dnl =================================================================== 6864 6865if echo "$build_cpu" | $GREP -q arm && test "$build_cpu" != "arm64" && test "$build_cpu" != "aarch64"; then 6866 # default value 6867 ARM_TARGET=ARMV4T 6868 AC_MSG_CHECKING([which ARM processor optimization to use]) 6869 if test "$with_arm_target" -lt "6"; then 6870 ARM_TARGET=ARMV4T 6871 elif test "$with_arm_target" = "6"; then 6872 ARM_TARGET=ARMV6 6873 elif test "$with_arm_target" -gt "6"; then 6874 ARM_TARGET=ARMV7 6875 fi 6876 AC_MSG_RESULT([$ARM_TARGET]) 6877 AC_SUBST(ARM_TARGET) 6878fi 6879 6880dnl =================================================================== 6881dnl Check whether the Cairo libraries are available. 6882dnl =================================================================== 6883 6884ENABLE_CAIRO="" 6885BUILD_PIXMAN="" 6886SYSTEM_CAIRO="" 6887 6888if test "$test_cairo" = "yes"; then 6889 6890 AC_MSG_CHECKING([whether to use cairo]) 6891 if test "x$enable_cairo" != "xno" ; then 6892 ENABLE_CAIRO="TRUE" 6893 AC_MSG_RESULT([yes]) 6894 AC_MSG_CHECKING([which cairo to use]) 6895 if test -n "$with_system_cairo" -o -n "$with_system_libs" && \ 6896 test "$with_system_cairo" != "no"; then 6897 AC_MSG_RESULT([external]) 6898 SYSTEM_CAIRO=YES 6899 6900 PKG_CHECK_MODULES( CAIRO, cairo >= 1.0.2 ) 6901 if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$ENABLE_FONTCONFIG" != "TRUE" ; then 6902 AC_MSG_ERROR([Cairo library requires fontconfig.]) 6903 fi 6904 if test "$with_system_xrender_headers" = "yes"; then 6905 AC_MSG_CHECKING([whether Xrender.h defines PictStandardA8]) 6906 AC_RUN_IFELSE([AC_LANG_SOURCE([[ 6907#include <X11/extensions/Xrender.h> 6908 6909int main(int argc, char **argv) { 6910#ifdef PictStandardA8 6911 return 0; 6912#else 6913 return 1; 6914#endif 6915} 6916 ]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, X headers too old.])],[]) 6917 fi 6918 else 6919 BUILD_TYPE="$BUILD_TYPE CAIRO" 6920 dnl === compiler fails on pixman with 64bit architectures...=== 6921 if test "$build_cpu" != "x86_64"; then 6922 BUILD_PIXMAN=YES 6923 fi 6924 AC_MSG_RESULT([internal]) 6925 fi 6926 else 6927 AC_MSG_RESULT([no]) 6928 fi 6929fi 6930 6931AC_SUBST(ENABLE_CAIRO) 6932AC_SUBST(BUILD_PIXMAN) 6933AC_SUBST(SYSTEM_CAIRO) 6934AC_SUBST(CAIRO_CFLAGS) 6935AC_SUBST(CAIRO_LIBS) 6936 6937ENABLE_CAIRO_CANVAS="FALSE" 6938if test "$enable_cairo_canvas" = "yes" -a "$ENABLE_CAIRO" = "TRUE" ; then 6939 ENABLE_CAIRO_CANVAS="TRUE" 6940fi 6941AC_SUBST(ENABLE_CAIRO_CANVAS) 6942 6943dnl =================================================================== 6944dnl Check whether the OpenGL libraries are available 6945dnl =================================================================== 6946 6947AC_MSG_CHECKING([whether to build the OpenGL Transitions component]) 6948ENABLE_OPENGL= 6949 6950if test "x$enable_opengl" != "xno" ; then 6951 AC_MSG_RESULT([yes]) 6952 AC_CHECK_HEADER(GL/gl.h, [], 6953 [AC_MSG_ERROR([OpenGL headers not found])], []) 6954 AC_CHECK_LIB(GL, main, [], 6955 [AC_MSG_ERROR(libGL not installed or functional)], []) 6956 AC_CHECK_LIB(GLU, main, [], 6957 [AC_MSG_ERROR(libGLU not installed or functional)], []) 6958 ENABLE_OPENGL=TRUE 6959else 6960 AC_MSG_RESULT([no]) 6961fi 6962 6963AC_SUBST(ENABLE_OPENGL) 6964 6965 6966AC_MSG_CHECKING([whether to build the PDF Import extension]) 6967if test -n "$enable_pdfimport" -a "$enable_pdfimport" != "no"; then 6968 AC_MSG_RESULT([yes]) 6969 ENABLE_PDFIMPORT=YES 6970 6971 dnl =================================================================== 6972 dnl Check for system poppler 6973 dnl =================================================================== 6974 AC_MSG_CHECKING([whether to use system pdf backend]) 6975 if test -n "$with_system_poppler" -o -n "$with_system_libs" && \ 6976 test "$with_system_poppler" != "no"; then 6977 AC_MSG_RESULT([external]) 6978 SYSTEM_POPPLER=YES 6979 PKG_CHECK_MODULES( POPPLER, poppler >= 0.8.0 ) 6980 else 6981 AC_MSG_RESULT([no]) 6982 SYSTEM_POPPLER=NO 6983 ENABLE_PDFIMPORT=NO 6984 fi 6985else 6986 AC_MSG_RESULT([no]) 6987 ENABLE_PDFIMPORT=NO 6988fi 6989AC_SUBST(ENABLE_PDFIMPORT) 6990AC_SUBST(SYSTEM_POPPLER) 6991AC_SUBST(POPPLER_CFLAGS) 6992AC_SUBST(POPPLER_LIBS) 6993 6994AC_MSG_CHECKING([whether to build the Wiki Publisher extension]) 6995if test -n "$enable_wiki_publisher" -a "$enable_wiki_publisher" != "no" && test "$WITH_JAVA" != "no"; then 6996 AC_MSG_RESULT([yes]) 6997 AC_MSG_CHECKING([for swext module]) 6998 if test -d ./swext; then 6999 AC_MSG_RESULT([OK]) 7000 else 7001 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 7002 fi 7003 ENABLE_MEDIAWIKI=YES 7004 BUILD_TYPE="$BUILD_TYPE SWEXT" 7005else 7006 AC_MSG_RESULT([no]) 7007 ENABLE_MEDIAWIKI=NO 7008fi 7009AC_SUBST(ENABLE_MEDIAWIKI) 7010 7011AC_MSG_CHECKING([whether to build the Report Builder extension]) 7012if test -n "$enable_report_builder" -a "$enable_report_builder" != "no" && test "$WITH_JAVA" != "no"; then 7013 AC_MSG_RESULT([yes]) 7014 ENABLE_REPORTBUILDER=YES 7015 SYSTEM_JFREEREPORT=YES 7016 AC_MSG_CHECKING([for reportbuilder module]) 7017 if test -d ./reportbuilder; then 7018 AC_MSG_RESULT([OK]) 7019 else 7020 AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)]) 7021 fi 7022 AC_MSG_CHECKING([which jfreereport libs to use (for Report Builder extension)]) 7023 AC_MSG_RESULT([external]) 7024 if test -z $SAC_JAR; then 7025 SAC_JAR=/usr/share/java/sac.jar 7026 fi 7027 AC_CHECK_FILE($SAC_JAR, [], 7028 [AC_MSG_ERROR(sac.jar not found.)], []) 7029 7030 if test -z $LIBXML_JAR; then 7031 AC_CHECK_FILE(/usr/share/java/libxml-1.0.0.jar, 7032 [ LIBXML_JAR=/usr/share/java/libxml-1.0.0.jar ], 7033 [ 7034 AC_CHECK_FILE(/usr/share/java/libxml.jar, 7035 [ LIBXML_JAR=/usr/share/java/libxml.jar ], 7036 [AC_MSG_ERROR(libxml.jar replacement not found.)] 7037 ) 7038 ] 7039 ) 7040 else 7041 AC_CHECK_FILE($LIBXML_JAR, [], 7042 [AC_MSG_ERROR(libxml.jar not found.)], []) 7043 fi 7044 7045 if test -z $FLUTE_JAR; then 7046 AC_CHECK_FILE(/usr/share/java/flute-1.3.0.jar, 7047 [ FLUTE_JAR=/usr/share/java/flute-1.3.0.jar ], 7048 [ 7049 AC_CHECK_FILE(/usr/share/java/flute.jar, 7050 [ FLUTE_JAR=/usr/share/java/flute.jar ], 7051 [ AC_MSG_ERROR(flute-1.3.0.jar replacement not found.)] 7052 ) 7053 ] 7054 ) 7055 else 7056 AC_CHECK_FILE($FLUTE_JAR, [], 7057 [AC_MSG_ERROR(flute-1.3.0.jar not found.)], []) 7058 fi 7059 7060 if test -z $JFREEREPORT_JAR; then 7061 AC_CHECK_FILE(/usr/share/java/flow-engine-0.9.2.jar, 7062 [ JFREEREPORT_JAR=/usr/share/java/flow-engine-0.9.2.jar ], 7063 [ 7064 AC_CHECK_FILE(/usr/share/java/flow-engine.jar, 7065 [ JFREEREPORT_JAR=/usr/share/java/flow-engine.jar ], 7066 [AC_MSG_ERROR(jfreereport.jar replacement not found.)] 7067 ) 7068 ] 7069 ) 7070 else 7071 AC_CHECK_FILE($JFREEREPORT_JAR, [], 7072 [AC_MSG_ERROR(jfreereport.jar not found.)], []) 7073 fi 7074 7075 if test -z $LIBLAYOUT_JAR; then 7076 AC_CHECK_FILE(/usr/share/java/liblayout-0.2.9.jar, 7077 [ LIBLAYOUT_JAR=/usr/share/java/liblayout-0.2.9.jar ], 7078 [ 7079 AC_CHECK_FILE(/usr/share/java/liblayout.jar, 7080 [ LIBLAYOUT_JAR=/usr/share/java/liblayout.jar ], 7081 [AC_MSG_ERROR(liblayout.jar replacement not found.)] 7082 ) 7083 ] 7084 ) 7085 else 7086 AC_CHECK_FILE($LIBLAYOUT_JAR, [], 7087 [AC_MSG_ERROR(liblayout.jar not found.)], []) 7088 fi 7089 7090 if test -z $LIBLOADER_JAR; then 7091 AC_CHECK_FILE(/usr/share/java/libloader-1.0.0.jar, 7092 [ LIBLOADER_JAR=/usr/share/java/libloader-1.0.0.jar ], 7093 [ 7094 AC_CHECK_FILE(/usr/share/java/libloader.jar, 7095 [ LIBLOADER_JAR=/usr/share/java/libloader.jar ], 7096 [AC_MSG_ERROR(libloader.jar replacement not found.)] 7097 ) 7098 ] 7099 ) 7100 else 7101 AC_CHECK_FILE($LIBLOADER_JAR, [], 7102 [AC_MSG_ERROR(libloader.jar not found.)], []) 7103 fi 7104 7105 if test -z $LIBFORMULA_JAR; then 7106 AC_CHECK_FILE(/usr/share/java/libformula-0.2.0.jar, 7107 [ LIBFORMULA_JAR=/usr/share/java/libformula-0.2.0.jar ], 7108 [ 7109 AC_CHECK_FILE(/usr/share/java/libformula.jar, 7110 [ LIBFORMULA_JAR=/usr/share/java/libformula.jar ], 7111 [AC_MSG_ERROR(libformula.jar replacement not found.)] 7112 ) 7113 ] 7114 ) 7115 else 7116 AC_CHECK_FILE($LIBFORMULA_JAR, [], 7117 [AC_MSG_ERROR(libformula.jar not found.)], []) 7118 fi 7119 7120 if test -z $LIBREPOSITORY_JAR; then 7121 AC_CHECK_FILE(/usr/share/java/librepository-1.0.0.jar, 7122 [ LIBREPOSITORY_JAR=/usr/share/java/librepository-1.0.0.jar ], 7123 [ 7124 AC_CHECK_FILE(/usr/share/java/librepository.jar, 7125 [ LIBREPOSITORY_JAR=/usr/share/java/librepository.jar ], 7126 [AC_MSG_ERROR(librepository.jar replacement not found.)] 7127 ) 7128 ] 7129 ) 7130 else 7131 AC_CHECK_FILE($LIBREPOSITORY_JAR, [], 7132 [AC_MSG_ERROR(librepository.jar not found.)], []) 7133 fi 7134 7135 if test -z $LIBFONTS_JAR; then 7136 AC_CHECK_FILE(/usr/share/java/libfonts-1.0.0.jar, 7137 [ LIBFONTS_JAR=/usr/share/java/libfonts-1.0.0.jar ], 7138 [ 7139 AC_CHECK_FILE(/usr/share/java/libfonts.jar, 7140 [ LIBFONTS_JAR=/usr/share/java/libfonts.jar ], 7141 [AC_MSG_ERROR(libfonts.jar replacement not found.)] 7142 ) 7143 ] 7144 ) 7145 else 7146 AC_CHECK_FILE($LIBFONTS_JAR, [], 7147 [AC_MSG_ERROR(libfonts.jar not found.)], []) 7148 fi 7149 7150 if test -z $LIBSERIALIZER_JAR; then 7151 AC_CHECK_FILE(/usr/share/java/libserializer-1.0.0.jar, 7152 [ LIBSERIALIZER_JAR=/usr/share/java/libserializer-1.0.0.jar ], 7153 [ 7154 AC_CHECK_FILE(/usr/share/java/libserializer.jar, 7155 [ LIBSERIALIZER_JAR=/usr/share/java/libserializer.jar ], 7156 [AC_MSG_ERROR(libserializer.jar replacement not found.)] 7157 ) 7158 ] 7159 ) 7160 else 7161 AC_CHECK_FILE($LIBSERIALIZER_JAR, [], 7162 [AC_MSG_ERROR(libserializer.jar not found.)], []) 7163 fi 7164 7165 7166 if test -z $LIBBASE_JAR; then 7167 AC_CHECK_FILE(/usr/share/java/libbase-1.0.0.jar, 7168 [ LIBBASE_JAR=/usr/share/java/libbase-1.0.0.jar ], 7169 [ 7170 AC_CHECK_FILE(/usr/share/java/libbase.jar, 7171 [ LIBBASE_JAR=/usr/share/java/libbase.jar ], 7172 [AC_MSG_ERROR(libbase.jar replacement not found.)] 7173 ) 7174 ] 7175 ) 7176 else 7177 AC_CHECK_FILE($LIBBASE_JAR, [], 7178 [AC_MSG_ERROR(libbase.jar not found.)], []) 7179 fi 7180 BUILD_TYPE="$BUILD_TYPE REPORTBUILDER" 7181else 7182 AC_MSG_RESULT([no]) 7183 ENABLE_REPORTBUILDER=NO 7184fi 7185AC_SUBST(ENABLE_REPORTBUILDER) 7186AC_SUBST(SYSTEM_JFREEREPORT) 7187AC_SUBST(SAC_JAR) 7188AC_SUBST(LIBXML_JAR) 7189AC_SUBST(FLUTE_JAR) 7190AC_SUBST(JFREEREPORT_JAR) 7191AC_SUBST(LIBBASE_JAR) 7192AC_SUBST(LIBLAYOUT_JAR) 7193AC_SUBST(LIBLOADER_JAR) 7194AC_SUBST(LIBFORMULA_JAR) 7195AC_SUBST(LIBREPOSITORY_JAR) 7196AC_SUBST(LIBFONTS_JAR) 7197AC_SUBST(LIBSERIALIZER_JAR) 7198 7199# this has to be here because the Report Builder uses commons-logging, 7200# while the non-optional PostgreSQL connector uses commons-lang. 7201AC_MSG_CHECKING([which Apache commons-* libs to use]) 7202if test "$with_system_apache_commons" = "yes"; then 7203 SYSTEM_APACHE_COMMONS=YES 7204 AC_MSG_RESULT([external]) 7205 7206 if test -z $COMMONS_LANG_JAR; then 7207 AC_CHECK_FILE(/usr/share/java/commons-lang3-3.3.jar, 7208 [ COMMONS_LANG_JAR=/usr/share/java/commons-lang3-3.3.jar ], 7209 [ 7210 AC_CHECK_FILE(/usr/share/java/commons-lang.jar, 7211 [ COMMONS_LANG_JAR=/usr/share/java/commons-lang.jar ], 7212 [AC_MSG_ERROR(commons-lang.jar replacement not found.)] 7213 ) 7214 ] 7215 ) 7216 else 7217 AC_CHECK_FILE($COMMONS_LANG_JAR, [], 7218 [AC_MSG_ERROR(commons-lang.jar not found.)], []) 7219 fi 7220 AC_MSG_CHECKING([whether commons-lang is version 3.x]) 7221 export COMMONS_LANG_JAR 7222 if $PERL -e 'use Archive::Zip; 7223 my $file = "$ENV{'COMMONS_LANG_JAR'}"; 7224 my $zip = Archive::Zip->new( $file ); 7225 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 7226 if ( $mf =~ m/Specification-Version: 3.*/ ) { 7227 exit 0; 7228 } else { 7229 exit 1; 7230 }'; then 7231 AC_MSG_RESULT([yes]) 7232 else 7233 AC_MSG_ERROR([no, you need Apache Commons Lang 3.x]) 7234 fi 7235 7236 if test "$ENABLE_REPORTBUILDER" = "YES"; then 7237 if test -z $COMMONS_LOGGING_JAR; then 7238 AC_CHECK_FILE(/usr/share/java/commons-logging-1.1.3.jar, 7239 [ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging-1.1.3.jar ], 7240 [ 7241 AC_CHECK_FILE(/usr/share/java/commons-logging.jar, 7242 [ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging.jar ], 7243 [AC_MSG_ERROR(commons-logging.jar replacement not found.)] 7244 ) 7245 ] 7246 ) 7247 else 7248 AC_CHECK_FILE($COMMONS_LOGGING_JAR, [], 7249 [AC_MSG_ERROR(commons-logging.jar not found.)], []) 7250 fi 7251 fi 7252else 7253 AC_MSG_RESULT([internal]) 7254 SYSTEM_APACHE_COMMONS=NO 7255 BUILD_TYPE="$BUILD_TYPE APACHE_COMMONS" 7256fi 7257AC_SUBST(SYSTEM_APACHE_COMMONS) 7258AC_SUBST(COMMONS_LANG_JAR) 7259AC_SUBST(COMMONS_LOGGING_JAR) 7260 7261dnl =================================================================== 7262dnl Check whether the Qt and KDE libraries are available. 7263dnl =================================================================== 7264 7265KDE_CFLAGS="" 7266KDE_LIBS="" 7267MOC="moc" 7268if test "$test_kde" = "yes" -a "$ENABLE_KDE" = "TRUE" ; then 7269 dnl Search paths for Qt and KDE 7270 if test "$build_cpu" != "x86_64" ; then 7271 qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib/qt3/include /usr/lib/qt/include /usr/share/qt3/include $x_includes" 7272 qt_libdirs="$QTLIB /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries" 7273 else 7274 qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib64/qt3/include /usr/lib64/qt/include /usr/share/qt3/include /usr/lib/qt3/include /usr/lib/qt/include $x_includes" 7275 qt_libdirs="$QTLIB /usr/local/qt/lib64 /usr/lib64/qt /usr/lib64 /usr/X11R6/lib64/X11/qt /usr/X11R6/lib64/qt /usr/lib64/qt3/lib64 /usr/lib64/qt/lib64 /usr/share/qt3/lib64 /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib $x_libraries" 7276 fi 7277 if test -n "$QTDIR" ; then 7278 qt_incdirs="$QTDIR/include $qt_incdirs" 7279 if test "$build_cpu" != "x86_64" ; then 7280 qt_libdirs="$QTDIR/lib $qt_libdirs" 7281 else 7282 qt_libdirs="$QTDIR/lib64 $QTDIR/lib $qt_libdirs" 7283 fi 7284 fi 7285 if test "$build_cpu" != "x86_64" ; then 7286 kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes" 7287 kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib $x_libraries" 7288 else 7289 kde_incdirs="/usr/lib64/kde/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes" 7290 kde_libdirs="/usr/lib64/kde/lib64 /usr/local/kde/lib64 /usr/kde/lib64 /usr/lib64/kde /usr/lib64/kde3 /usr/X11R6/lib64 /usr/local/lib64 /opt/kde3/lib64 /opt/kde/lib64 /usr/X11R6/kde/lib64 /usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib64 $x_libraries" 7291 fi 7292 if test -n "$KDEDIR" ; then 7293 kde_incdirs="$KDEDIR/include $kde_incdirs" 7294 if test "$build_cpu" != "x86_64" ; then 7295 kde_libdirs="$KDEDIR/lib $kde_libdirs" 7296 else 7297 kde_libdirs="$KDEDIR/lib64 $KDEDIR/lib $kde_libdirs" 7298 fi 7299 fi 7300 7301 dnl What to test 7302 qt_test_include="qstyle.h" 7303 qt_test_library="libqt-mt.so" 7304 kde_test_include="ksharedptr.h" 7305 kde_test_library="libkdeui.so" 7306 7307 dnl Check for Qt headers 7308 AC_MSG_CHECKING([for Qt headers]) 7309 qt_incdir="no" 7310 for kde_check in $qt_incdirs ; do 7311 if test -r "$kde_check/$qt_test_include" ; then 7312 qt_incdir="$kde_check" 7313 break 7314 fi 7315 done 7316 AC_MSG_RESULT([$qt_incdir]) 7317 if test "x$qt_incdir" = "xno" ; then 7318 AC_MSG_ERROR([Qt headers not found. Please specify the root of 7319your Qt installation by exporting QTDIR before running "configure".]) 7320 fi 7321 7322 dnl Check for Qt libraries 7323 AC_MSG_CHECKING([for Qt libraries]) 7324 qt_libdir="no" 7325 for qt_check in $qt_libdirs ; do 7326 if test -r "$qt_check/$qt_test_library" ; then 7327 qt_libdir="$qt_check" 7328 break 7329 fi 7330 done 7331 AC_MSG_RESULT([$qt_libdir]) 7332 if test "x$qt_libdir" = "xno" ; then 7333 AC_MSG_ERROR([Qt libraries not found. Please specify the root of 7334your Qt installation by exporting QTDIR before running "configure".]) 7335 fi 7336 7337 dnl Check for Meta Object Compiler 7338 AC_PATH_PROG( MOC, moc, no, [$QTDIR/bin:$PATH] ) 7339 if test "$MOC" = "no" ; then 7340 AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify 7341the root of your Qt installation by exporting QTDIR before running "configure".]) 7342 fi 7343 7344 dnl Check for KDE headers 7345 AC_MSG_CHECKING([for KDE headers]) 7346 kde_incdir="no" 7347 for kde_check in $kde_incdirs ; do 7348 if test -r "$kde_check/$kde_test_include" ; then 7349 kde_incdir="$kde_check" 7350 break 7351 fi 7352 done 7353 AC_MSG_RESULT([$kde_incdir]) 7354 if test "x$kde_incdir" = "xno" ; then 7355 AC_MSG_ERROR([KDE headers not found. Please specify the root of 7356your KDE installation by exporting KDEDIR before running "configure".]) 7357 fi 7358 7359 dnl Check for KDE libraries 7360 AC_MSG_CHECKING([for KDE libraries]) 7361 kde_libdir="no" 7362 for kde_check in $kde_libdirs ; do 7363 if test -r "$kde_check/$kde_test_library" ; then 7364 kde_libdir="$kde_check" 7365 break 7366 fi 7367 done 7368 AC_MSG_RESULT([$kde_libdir]) 7369 if test "x$kde_libdir" = "xno" ; then 7370 AC_MSG_ERROR([KDE libraries not found. Please specify the root of 7371your KDE installation by exporting KDEDIR before running "configure".]) 7372 fi 7373 7374 dnl Set the variables 7375 KDE_CFLAGS="-I$qt_incdir -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT" 7376 KDE_LIBS="-L$kde_libdir -L$qt_libdir -lkdeui -lkdecore -lqt-mt" 7377fi 7378AC_SUBST(KDE_CFLAGS) 7379AC_SUBST(KDE_LIBS) 7380AC_SUBST(MOC) 7381 7382dnl =================================================================== 7383dnl KDE4 Integration 7384dnl =================================================================== 7385 7386KDE4_CFLAGS="" 7387KDE4_LIBS="" 7388MOC4="moc" 7389if test "$test_kde4" = "yes" -a "$ENABLE_KDE4" = "TRUE" ; then 7390 qt_incdirs="$QT4INC $QT4DIR /usr/include/qt4 /usr/include $x_includes" 7391 qt_libdirs="$QT4LIB /usr/lib $x_libraries" 7392 7393 kde_incdirs="/usr/include /usr/include/kde4 $x_includes" 7394 kde_libdirs="/usr/lib /usr/lib/kde4 /usr/lib/kde4/devel $x_libraries" 7395 7396 if test "$build_cpu" = "x86_64" ; then 7397 qt_libdirs="$qt_libdirs /usr/lib64/qt4 /usr/lib64/qt /usr/lib64" 7398 kde_libdirs="$kde_libdirs /usr/lib64 /usr/lib64/kde4 /usr/lib64/kde4/devel" 7399 fi 7400 7401 if test -n "$KDE4DIR" ; then 7402 kde_incdirs="$KDE4DIR/include $kde_incdirs" 7403 if test "$build_cpu" != "x86_64" ; then 7404 kde_libdirs="$KDE4DIR/lib $kde_libdirs" 7405 else 7406 kde_libdirs="$KDE4DIR/lib64 $KDE4DIR/lib $kde_libdirs" 7407 fi 7408 fi 7409 7410 qt_test_include="Qt/qobject.h" 7411 qt_test_library="libQtCore.so" 7412 kde_test_include="ksharedptr.h" 7413 kde_test_library="libkdeui.so" 7414 7415 AC_MSG_CHECKING([for Qt4 headers]) 7416 qt_header_dir="no" 7417 for inc_dir in $qt_incdirs ; do 7418 if test -r "$inc_dir/$qt_test_include" ; then 7419 qt_header_dir="$inc_dir" 7420 break 7421 fi 7422 done 7423 7424 AC_MSG_RESULT([$qt_header_dir]) 7425 if test "x$qt_header_dir" = "xno" ; then 7426 AC_MSG_ERROR([Qt4 headers not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".]) 7427 fi 7428 7429 AC_MSG_CHECKING([for Qt4 libraries]) 7430 qt_lib_dir="no" 7431 for lib_dir in $qt_libdirs ; do 7432 if test -r "$lib_dir/$qt_test_library" ; then 7433 qt_lib_dir="$lib_dir" 7434 break 7435 fi 7436 done 7437 7438 AC_MSG_RESULT([$qt_lib_dir]) 7439 7440 if test "x$qt_lib_dir" = "xno" ; then 7441 AC_MSG_ERROR([Qt4 libraries not found. Please specify the root of your Qt4 installation by exporting QT4DIR before running "configure".]) 7442 fi 7443 7444 dnl Check for Meta Object Compiler 7445 AC_PATH_PROG( MOCQT4, moc-qt4, no, [$QT4DIR/bin:$PATH] ) 7446 MOC4="$MOCQT4" 7447 if test "$MOC4" = "no" ; then 7448 AC_PATH_PROG( MOC4, moc, no, [$PATH:$QT4DIR/bin] ) 7449 if test "$MOC4" = "no" ; then 7450 AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify the root of your Qt installation by exporting QT4DIR before running "configure".]) 7451 fi 7452 fi 7453 7454 dnl Check for KDE4 headers 7455 AC_MSG_CHECKING([for KDE4 headers]) 7456 kde_incdir="no" 7457 for kde_check in $kde_incdirs ; do 7458 if test -r "$kde_check/$kde_test_include" ; then 7459 kde_incdir="$kde_check" 7460 break 7461 fi 7462 done 7463 AC_MSG_RESULT([$kde_incdir]) 7464 if test "x$kde_incdir" = "xno" ; then 7465 AC_MSG_ERROR([KDE4 headers not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".]) 7466 fi 7467 7468 dnl Check for KDE4 libraries 7469 AC_MSG_CHECKING([for KDE4 libraries]) 7470 kde_libdir="no" 7471 for kde_check in $kde_libdirs ; do 7472 if test -r "$kde_check/$kde_test_library" ; then 7473 kde_libdir="$kde_check" 7474 break 7475 fi 7476 done 7477 7478 AC_MSG_RESULT([$kde_libdir]) 7479 if test "x$kde_libdir" = "xno" ; then 7480 AC_MSG_ERROR([KDE4 libraries not found. Please specify the root of your KDE4 installation by exporting KDE4DIR before running "configure".]) 7481 fi 7482 7483 KDE4_CFLAGS="`pkg-config --cflags QtCore` `pkg-config --cflags QtGui` -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT" 7484 KDE4_LIBS="-L$kde_libdir -L$qt_lib_dir -lkdeui -lkdecore -lQtCore -lQtGui" 7485fi 7486AC_SUBST(KDE4_CFLAGS) 7487AC_SUBST(KDE4_LIBS) 7488AC_SUBST(MOC4) 7489 7490dnl =================================================================== 7491dnl Test for the enabling the lockdown pieces 7492dnl =================================================================== 7493AC_MSG_CHECKING([whether to enable the lockdown pieces]) 7494ENABLE_LOCKDOWN="" 7495if test -n "$enable_lockdown" && test "$enable_lockdown" != "no"; then 7496 ENABLE_LOCKDOWN=YES 7497 AC_MSG_RESULT([yes]) 7498else 7499 AC_MSG_RESULT([no]) 7500fi 7501AC_SUBST(ENABLE_LOCKDOWN) 7502 7503dnl =================================================================== 7504dnl Test whether to include Evolution 2 support 7505dnl =================================================================== 7506AC_MSG_CHECKING([whether to enable evolution 2 support]) 7507if test "$enable_evolution2" = "yes" -o "$enable_evolution2" = "TRUE"; then 7508 AC_MSG_RESULT([yes]) 7509 PKG_CHECK_MODULES(GOBJECT, gobject-2.0) 7510 ENABLE_EVOAB2="TRUE" 7511else 7512 ENABLE_EVOAB2="" 7513 AC_MSG_RESULT([no]) 7514fi 7515AC_SUBST(ENABLE_EVOAB2) 7516AC_SUBST(GOBJECT_CFLAGS) 7517AC_SUBST(GOBJECT_LIBS) 7518 7519dnl =================================================================== 7520dnl Test whether to include MathMLDTD 7521dnl =================================================================== 7522AC_MSG_CHECKING([whether to include MathMLDTD]) 7523if test -n "$enable_mathmldtd"; then 7524 if test "$enable_mathmldtd" = "no"; then 7525 AC_MSG_RESULT([no]) 7526 SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD" 7527 else 7528 AC_MSG_RESULT([yes]) 7529 BUILD_TYPE="$BUILD_TYPE MATHMLDTD" 7530 fi 7531else 7532 AC_MSG_RESULT([no]) 7533 SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD" 7534fi 7535 7536dnl =================================================================== 7537dnl Test whether to include category-B fonts 7538dnl =================================================================== 7539WITH_CATB_FONTS= 7540AC_MSG_CHECKING([whether to include category B fonts]) 7541if test "x$enable_category_b_fonts" = "xyes" && test "x$with_fonts" != "xno"; then 7542 AC_MSG_RESULT([yes]) 7543 BUILD_TYPE="$BUILD_TYPE CATB_FONTS" 7544 WITH_CATB_FONTS=YES 7545 SCPDEFS="$SCPDEFS -DWITH_CATB_FONTS" 7546else 7547 AC_MSG_RESULT([no]) 7548 WITH_CATB_FONTS=NO 7549fi 7550 7551dnl =================================================================== 7552dnl Test whether to include category-A fonts 7553dnl =================================================================== 7554WITH_CATA_FONTS= 7555AC_MSG_CHECKING([whether to include category A fonts]) 7556if test "x$with_fonts" != "xno" ; then 7557 AC_MSG_RESULT([yes]) 7558 WITH_CATA_FONTS=YES 7559 SCPDEFS="$SCPDEFS -DWITH_CATA_FONTS" 7560else 7561 AC_MSG_RESULT([no]) 7562 WITH_CATA_FONTS=NO 7563 WITH_CATB_FONTS=NO 7564fi 7565 7566WITH_FONTS=NO 7567AC_MSG_CHECKING([whether any fonts are included]) 7568if test "x$WITH_CATA_FONTS" = "xYES" -o "x$WITH_CATB_FONTS" = "xYES"; then 7569 BUILD_TYPE="$BUILD_TYPE MORE_FONTS" 7570 WITH_FONTS=YES 7571 AC_MSG_RESULT([yes]) 7572else 7573 AC_MSG_RESULT([no]) 7574fi 7575 7576AC_SUBST(WITH_CATA_FONTS) 7577AC_SUBST(WITH_CATB_FONTS) 7578AC_SUBST(WITH_FONTS) 7579 7580dnl =================================================================== 7581dnl Test whether to include ppds 7582dnl =================================================================== 7583AC_MSG_CHECKING([whether to include PPDs]) 7584if test "$with_ppds" != "no"; then 7585 AC_MSG_RESULT([yes]) 7586else 7587 AC_MSG_RESULT([no]) 7588 WITHOUT_PPDS=YES 7589 SCPDEFS="$SCPDEFS -DWITHOUT_PPDS" 7590fi 7591AC_SUBST(WITHOUT_PPDS) 7592 7593dnl =================================================================== 7594dnl Test whether to include afms 7595dnl =================================================================== 7596AC_MSG_CHECKING([whether to include AFMs]) 7597if test "$with_afms" != "no"; then 7598 AC_MSG_RESULT([yes]) 7599 BUILD_TYPE="$BUILD_TYPE AFMS" 7600else 7601 AC_MSG_RESULT([no]) 7602 WITHOUT_AFMS=YES 7603 SCPDEFS="$SCPDEFS -DWITHOUT_AFMS" 7604fi 7605AC_SUBST(WITHOUT_AFMS) 7606 7607AC_SUBST(SCPDEFS) 7608 7609AC_MSG_CHECKING([whether and how to use Xinerama]) 7610if test "$_os" = "Darwin"; then 7611 USE_XINERAMA=YES 7612 XINERAMA_LINK=dynamic 7613 AC_MSG_RESULT([yes]) 7614elif test "$_os" = "Linux" -o "$_os" = "FreeBSD"; then 7615 if test -e "$XLIB/libXinerama.so" -a -e "$XLIB/libXinerama.a"; then 7616 # we have both versions, let the user decide but use the dynamic one 7617 # per default 7618 USE_XINERAMA=YES 7619 if test -z "$with_static_xinerama" -o -n "$with_system_libs"; then 7620 XINERAMA_LINK=dynamic 7621 else 7622 XINERAMA_LINK=static 7623 fi 7624 elif test -e "$XLIB/libXinerama.so" -a ! -e "$XLIB/libXinerama.a"; then 7625 # we have only the dynamic version 7626 USE_XINERAMA=YES 7627 XINERAMA_LINK=dynamic 7628 elif test -e "$XLIB/libXinerama.a"; then 7629 # static version 7630 if echo $build_cpu | $GREP -E 'i[[3456]]86' 2>/dev/null >/dev/null; then 7631 USE_XINERAMA=YES 7632 XINERAMA_LINK=static 7633 else 7634 USE_XINERAMA=NO 7635 XINERAMA_LINK=none 7636 fi 7637 else 7638 # no Xinerama 7639 USE_XINERAMA=NO 7640 XINERAMA_LINK=none 7641 fi 7642 if test "$USE_XINERAMA" = "YES"; then 7643 AC_MSG_RESULT([yes, with $XINERAMA_LINK linking]) 7644 AC_CHECK_HEADER(X11/extensions/Xinerama.h, [], 7645 [AC_MSG_ERROR(Xinerama header not found.)], []) 7646 XINERAMA_EXTRA_LIBS="-L$XLIB -lXext" 7647 if test "$_os" = "FreeBSD"; then 7648 XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -lXt" 7649 fi 7650 if test "$_os" = "Linux"; then 7651 XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -ldl" 7652 fi 7653 AC_CHECK_LIB(Xinerama, XineramaIsActive, [], 7654 [AC_MSG_ERROR(Xinerama not functional?)], [$XINERAMA_EXTRA_LIBS]) 7655 else 7656 AC_MSG_RESULT([no, libXinerama not found or wrong architecture.]) 7657 fi 7658else 7659 AC_MSG_RESULT([no]) 7660fi 7661AC_SUBST(USE_XINERAMA) 7662AC_SUBST(XINERAMA_LINK) 7663 7664dnl =================================================================== 7665dnl always rely on the system version of gdk-pixbuf 7666dnl =================================================================== 7667 7668SYSTEM_GDKPIXBUF=YES 7669AC_SUBST(SYSTEM_GDKPIXBUF) 7670 7671dnl =================================================================== 7672dnl always rely on the system version of glib 7673dnl =================================================================== 7674 7675SYSTEM_GLIB=YES 7676AC_SUBST(SYSTEM_GLIB) 7677 7678dnl =================================================================== 7679dnl always rely on the system version of gettext 7680dnl =================================================================== 7681 7682SYSTEM_GETTEXT=YES 7683AC_SUBST(SYSTEM_GETTEXT) 7684 7685if test "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then 7686 LIBINTL_PREFIX= 7687 for dir in $CPPFLAGS; do 7688 if dir=`expr -- $dir : '-I\(.*\)'`; then 7689 if test -f "$dir/libintl.h" ; then 7690 LIBINTL_PREFIX=`dirname $dir` 7691 fi 7692 fi 7693 done 7694 if test -z "$LIBINTL_PREFIX"; then 7695 for dir in /usr/local /opt/homebrew /opt/local /usr; do 7696 test -f "$dir/include/libintl.h" && LIBINTL_PREFIX=$dir && break 7697 done 7698 fi 7699 AC_SUBST(LIBINTL_PREFIX) 7700fi 7701 7702dnl =================================================================== 7703dnl always rely on the system version of pango 7704dnl =================================================================== 7705 7706SYSTEM_PANGO=YES 7707AC_SUBST(SYSTEM_PANGO) 7708 7709dnl =================================================================== 7710dnl Test whether to build libpng or rely on the system version 7711dnl =================================================================== 7712AC_MSG_CHECKING([whether to build own version of libpng]) 7713 7714case "$_os" in 7715 WINNT*) # Windows 7716 SYSTEM_LIBPNG=NO 7717 AC_MSG_RESULT([yes]) 7718 ;; 7719 Darwin*) 7720 SYSTEM_LIBPNG=NO 7721 AC_MSG_RESULT([yes]) 7722 ;; 7723 *) 7724 SYSTEM_LIBPNG=YES 7725 AC_MSG_RESULT([no]) 7726 ;; 7727esac 7728AC_SUBST(SYSTEM_LIBPNG) 7729 7730dnl =================================================================== 7731dnl Test whether to build libjpeg or rely on the system version 7732dnl =================================================================== 7733dnl FIXME: this is currently because we have jpeg-6b for our filters 7734dnl and jpeg-8 as dependency for librsvg 7735dnl this should be unified into using only one version for both 7736 7737AC_MSG_CHECKING([whether to build own version of libjpeg]) 7738 7739if test "$SYSTEM_JPEG" = "YES"; then 7740SYSTEM_LIBJPEG=YES 7741else 7742case "$_os" in 7743 WINNT*) # Windows 7744 SYSTEM_LIBJPEG=NO 7745 ;; 7746 Darwin*) 7747 SYSTEM_LIBJPEG=NO 7748 ;; 7749 *) 7750 SYSTEM_LIBJPEG=YES 7751 ;; 7752esac 7753fi 7754 7755if test "$SYSTEM_LIBJPEG" = "YES"; then 7756 AC_MSG_RESULT([no]) 7757else 7758 AC_MSG_RESULT([yes]) 7759fi 7760AC_SUBST(SYSTEM_LIBJPEG) 7761 7762dnl =================================================================== 7763dnl Test whether rat scan was requested and whether apache-rat is available 7764dnl =================================================================== 7765RAT_JAR= 7766AC_MSG_CHECKING([whether to trigger rat scan]) 7767if test -z "$with_rat_scan" -o "$with_rat_scan" = "no"; then 7768 AC_MSG_RESULT([no]) 7769else 7770 if test "$WITH_JAVA" = "no"; then 7771 AC_MSG_ERROR([no, java disabled, enable with --with-java]) 7772 elif test "$enable_saxon" = "no"; then 7773 AC_MSG_ERROR([no, saxon disabled, enable with --enable-category-b]) 7774 elif test "$with_rat_scan" = "yes"; then 7775 AC_MSG_RESULT([yes, use pre-built library]) 7776 RAT_JAR_HOME="BUILD" 7777 BUILD_TYPE="$BUILD_TYPE RAT" 7778 else 7779 AC_MSG_RESULT([yes, use pre-installed library]) 7780 AC_MSG_CHECKING([whether apache-rat is available]) 7781 if test -d "$with_rat_scan"; then 7782 RAT_JAR_HOME=$with_rat_scan 7783 else 7784 AC_MSG_ERROR([$with_rat_scan is not a directory]) 7785 fi 7786 fi 7787fi 7788AC_SUBST(RAT_JAR_HOME) 7789 7790 7791dnl =================================================================== 7792dnl Test for the presence of Ant and that it works 7793dnl =================================================================== 7794 7795if test "$SOLAR_JAVA" != ""; then 7796ANT_HOME=; export ANT_HOME 7797WITH_ANT_HOME=; export WITH_ANT_HOME 7798if test -z "$with_ant_home"; then 7799 if test "$_os" = "OS2"; then 7800 AC_PATH_PROGS(ANT, ant.cmd) 7801 else 7802 AC_PATH_PROGS(ANT, [apache-ant ant ant.sh ant.bat ant.cmd]) 7803 fi 7804else 7805 if test "$_os" = "WINNT"; then 7806 with_ant_home=`cygpath -u "$with_ant_home"` 7807 fi 7808 if test "$_os" = "OS2"; then 7809 AC_PATH_PROGS(ANT, ant.cmd,,$with_ant_home/bin:$PATH) 7810 else 7811 AC_PATH_PROGS(ANT, [apache-ant ant ant.sh ant.bat ant.cmd],,$with_ant_home/bin:$PATH) 7812 fi 7813 WITH_ANT_HOME=$with_ant_home 7814 ANT_HOME=$with_ant_home 7815fi 7816 7817if test -z "$ANT"; then 7818 AC_MSG_ERROR([Ant not found - Make sure it's in the path or use --with-ant-home]) 7819else 7820 # resolve relative or absolute symlink 7821 while test -h "$ANT"; do 7822 a_cwd=`pwd` 7823 a_basename=`basename "$ANT"` 7824 a_script=`ls -l "$ANT" | sed "s/.*${a_basename} -> //g"` 7825 cd "`dirname "$ANT"`" 7826 cd "`dirname "$a_script"`" 7827 ANT="`pwd`"/"`basename "$a_script"`" 7828 cd "$a_cwd" 7829 done 7830 7831 if test "$_os" = "OS2"; then 7832 ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"` 7833 export ANT_HOME 7834 fi 7835 7836 AC_MSG_CHECKING([if $ANT works]) 7837cat > conftest.java << EOF 7838 public class conftest { 7839 int testmethod(int a, int b) { 7840 return a + b; 7841 } 7842 } 7843EOF 7844 7845cat > conftest.xml << EOF 7846 <project name="conftest" default="conftest"> 7847 <target name="conftest"> 7848 <javac srcdir="." includes="conftest.java"> 7849 </javac> 7850 </target> 7851 </project> 7852EOF 7853 oldJAVA_HOME=$JAVA_HOME 7854 if test "$JAVACISGCJ" = "yes"; then 7855 JAVA_HOME=; export JAVA_HOME 7856 ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2" 7857 else 7858 ant_cmd="$ANT -buildfile conftest.xml 1>&2" 7859 fi 7860 AC_TRY_EVAL(ant_cmd) 7861 if test $? = 0 && test -f ./conftest.class ; then 7862 AC_MSG_RESULT([Ant works]) 7863 if test -z "$WITH_ANT_HOME"; then 7864 ANT_HOME=`$ANT -diagnostics | $EGREP "ant.home :" | $SED -e "s#ant.home : ##g"` 7865 if test -z "$ANT_HOME"; then 7866 ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"` 7867 fi 7868 else 7869 ANT_HOME="$WITH_ANT_HOME" 7870 fi 7871 else 7872 echo "configure: Ant test failed" >&5 7873 cat conftest.java >&5 7874 cat conftest.xml >&5 7875 AC_MSG_WARN([Ant does not work - Some Java projects will not build!]) 7876 ANT_HOME="" 7877 echo "Ant does not work - Some Java projects will not build!" >>warn 7878 fi 7879 JAVA_HOME=$oldJAVA_HOME 7880 rm -f conftest* core core.* *.core 7881fi 7882if test -z "$ANT_HOME"; then 7883 ANT_HOME="NO_ANT_HOME" 7884fi 7885AC_SUBST(ANT_HOME) 7886 7887dnl Checking for ant.jar 7888if test "$ANT_HOME" != "NO_ANT_HOME"; then 7889 AC_MSG_CHECKING([Ant lib directory]) 7890 if test -f $ANT_HOME/lib/ant.jar; then 7891 ANT_LIB="$ANT_HOME/lib" 7892 else 7893 if test -f $ANT_HOME/ant.jar; then 7894 ANT_LIB="$ANT_HOME" 7895 else 7896 if test -f /usr/share/java/ant.jar; then 7897 ANT_LIB=/usr/share/java 7898 else 7899 if test -f /usr/share/ant-core/lib/ant.jar; then 7900 ANT_LIB=/usr/share/ant-core/lib 7901 else 7902 if test -f $ANT_HOME/lib/ant/ant.jar; then 7903 ANT_LIB="$ANT_HOME/lib/ant" 7904 else 7905 if test -f /usr/share/lib/ant/ant.jar; then 7906 ANT_LIB=/usr/share/lib/ant 7907 else 7908 AC_MSG_ERROR([Ant libraries not found!]) 7909 fi 7910 fi 7911 fi 7912 fi 7913 fi 7914 fi 7915 AC_MSG_RESULT([Ant lib directory found.]) 7916fi 7917AC_SUBST(ANT_LIB) 7918fi 7919 7920ant_minver=1.9.1 7921# update for more extensions... 7922if test "$ENABLE_MEDIAWIKI" = "YES"; then 7923 ant_minver=1.9.1 7924fi 7925ant_minminor1=`echo $ant_minver | cut -d"." -f2` 7926 7927AC_MSG_CHECKING([whether ant is >= $ant_minver]) 7928ant_version=`$ANT -version | $AWK '{ print $4; }'` 7929ant_version_major=`echo $ant_version | cut -d. -f1` 7930ant_version_minor=`echo $ant_version | cut -d. -f2` 7931echo "configure: ant_version $ant_version " >&5 7932echo "configure: ant_version_major $ant_version_major " >&5 7933echo "configure: ant_version_minor $ant_version_minor " >&5 7934if test "$ant_version_major" -ge "2"; then 7935 AC_MSG_RESULT([yes, $ant_version]) 7936elif test "$ant_version_major" = "1" && test "$ant_version_minor" -ge "$ant_minminor1"; then 7937 AC_MSG_RESULT([yes, $ant_version]) 7938else 7939 AC_MSG_ERROR([no, you need at least ant >= $ant_minver]) 7940fi 7941 7942if test "$ENABLE_MEDIAWIKI" = "YES"; then 7943AC_MSG_CHECKING([whether ant supports mapper type="regexp"]) 7944rm -rf confdir 7945mkdir confdir 7946cat > conftest.java << EOF 7947 public class conftest { 7948 int testmethod(int a, int b) { 7949 return a + b; 7950 } 7951 } 7952EOF 7953 7954cat > conftest.xml << EOF 7955 <project name="conftest" default="conftest"> 7956 <target name="conftest" depends="copytest"> 7957 <javac srcdir="." includes="conftest.java"> 7958 </javac> 7959 </target> 7960 <target name="copytest"> 7961 <copy todir="confdir"> 7962 <fileset dir="confdir" includes="**/*.abc" casesensitive="yes"/> 7963 <filterset/> 7964 <mapper type="regexp" from="^(.*[/\\])foo([/\\].*)" to="\1baa\2"/> 7965 </copy> 7966 </target> 7967 </project> 7968EOF 7969 if test "$JAVACISGCJ" = "yes"; then 7970 JAVA_HOME=; export JAVA_HOME 7971 ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2" 7972 else 7973 ant_cmd="$ANT -buildfile conftest.xml 1>&2" 7974 fi 7975 AC_TRY_EVAL(ant_cmd) 7976 if test $? = 0 && test -f ./conftest.class ; then 7977 AC_MSG_RESULT([yes]) 7978 rm -rf confdir 7979 else 7980 echo "configure: Ant test failed" >&5 7981 cat conftest.java >&5 7982 cat conftest.xml >&5 7983 rm -rf confdir 7984 AC_MSG_ERROR([no. Did you install ant-apache-regexp?]) 7985 fi 7986fi 7987rm -f conftest* core core.* *.core 7988 7989OOO_JUNIT_JAR= 7990JUNIT_NEEDS_HAMCREST= 7991if test "$SOLAR_JAVA" != "" && test "$with_junit" != "no"; then 7992 AC_MSG_CHECKING([for JUnit]) 7993 if test "$with_junit" = "yes"; then 7994 if test -e /usr/share/java/junit4.jar; then 7995 OOO_JUNIT_JAR=/usr/share/java/junit4.jar 7996 else 7997 if test -e /usr/local/share/java/classes/junit4.jar; then 7998 OOO_JUNIT_JAR=/usr/local/share/java/classes/junit4.jar 7999 else 8000 if test -e /usr/share/lib/java/junit.jar; then 8001 OOO_JUNIT_JAR=/usr/share/lib/java/junit.jar 8002 else 8003 if test -e /usr/share/local/lib/java/junit.jar; then 8004 OOO_JUNIT_JAR=/usr/share/local/lib/java/junit.jar 8005 else 8006 if test -e /usr/share/java/junit.jar; then 8007 OOO_JUNIT_JAR=/usr/share/java/junit.jar 8008 else 8009 if test -e /usr/local/share/java/classes/junit.jar; then 8010 OOO_JUNIT_JAR=/usr/local/share/java/classes/junit.jar 8011 fi 8012 fi 8013 fi 8014 fi 8015 fi 8016 fi 8017 else 8018 OOO_JUNIT_JAR=$with_junit 8019 fi 8020 if test -e "$OOO_JUNIT_JAR"; then 8021 AC_MSG_RESULT([yes]) 8022 else 8023 AC_MSG_ERROR([cannot find JUnit 4 jar; please install one in the default 8024locations (/usr/share/java or /usr/local/share/java/classes), specify its pathname via 8025--with-junit=..., or disable it via --without-junit.]) 8026 fi 8027 if test "$_os" = "WINNT"; then 8028 OOO_JUNIT_JAR=`cygpath -m "$OOO_JUNIT_JAR"` 8029 fi 8030 AC_MSG_CHECKING([whether JUnit is version 4.x]) 8031 export OOO_JUNIT_JAR 8032 if $PERL -e 'use Archive::Zip; 8033 my $file = "$ENV{'OOO_JUNIT_JAR'}"; 8034 my $zip = Archive::Zip->new( $file ); 8035 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 8036 if ( $mf =~ m/Implementation-Version: 4.12*/ ) { 8037 exit 0; 8038 } elsif ( $mf =~ m/Implementation-Version: 4.11*/ ) { 8039 exit 0; 8040 } elsif ( $mf =~ m/Bundle-Version: 4.12*/ ) { 8041 exit 0; 8042 } elsif ( $mf =~ m/Bundle-Version: 4.11*/ ) { 8043 exit 0; 8044 } else { 8045 exit 1; 8046 }'; then 8047 AC_MSG_RESULT([yes, but Hamcrest Core is mandatory with this JUnit version (>= 4.11)]) 8048 JUNIT_NEEDS_HAMCREST=yes 8049 elif $PERL -e 'use Archive::Zip; 8050 my $file = "$ENV{'OOO_JUNIT_JAR'}"; 8051 my $zip = Archive::Zip->new( $file ); 8052 my $mf = $zip->contents ( "META-INF/MANIFEST.MF" ); 8053 if ( $mf =~ m/Implementation-Version: 4.*/ ) { 8054 exit 0; 8055 } elsif ( $mf =~ m/Bundle-Version: 4.*/ ) { 8056 } else { 8057 exit 1; 8058 }'; then 8059 AC_MSG_RESULT([yes]) 8060 else 8061 AC_MSG_ERROR([no, your JUnit version is too old, you need JUnit 4.x]) 8062 fi 8063fi 8064AC_SUBST(OOO_JUNIT_JAR) 8065 8066HAMCREST_CORE_JAR= 8067if test "$SOLAR_JAVA" != "" && test "$with_hamcrest_core" != "no"; then 8068 AC_MSG_CHECKING([for hamcrest-core]) 8069 if test "$with_hamcrest_core" = "yes"; then 8070 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest-core-1.3.jar; then 8071 HAMCREST_CORE_JAR=/usr/share/java/hamcrest-core-1.3.jar 8072 fi 8073 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest-core-1.3.jar; then 8074 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest-core-1.3.jar 8075 fi 8076 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/lib/java/hamcrest-core.jar; then 8077 HAMCREST_CORE_JAR=/usr/share/lib/java/hamcrest-core.jar 8078 fi 8079 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/lib/java/hamcrest-core.jar; then 8080 HAMCREST_CORE_JAR=/usr/local/share/lib/java/hamcrest-core.jar 8081 fi 8082 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest-core.jar; then 8083 HAMCREST_CORE_JAR=/usr/share/java/hamcrest-core.jar 8084 fi 8085 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest-core.jar; then 8086 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest-core.jar 8087 fi 8088 # Sometimes the "-core-" part is missing... 8089 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest1.3.jar; then 8090 HAMCREST_CORE_JAR=/usr/share/java/hamcrest1.3.jar 8091 fi 8092 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest1.3.jar; then 8093 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest1.3.jar 8094 fi 8095 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/lib/java/hamcrest.jar; then 8096 HAMCREST_CORE_JAR=/usr/share/lib/java/hamcrest.jar 8097 fi 8098 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/lib/java/hamcrest.jar; then 8099 HAMCREST_CORE_JAR=/usr/local/share/lib/java/hamcrest.jar 8100 fi 8101 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/share/java/hamcrest.jar; then 8102 HAMCREST_CORE_JAR=/usr/share/java/hamcrest.jar 8103 fi 8104 if test "$HAMCREST_CORE_JAR" = "" && test -e /usr/local/share/java/classes/hamcrest.jar; then 8105 HAMCREST_CORE_JAR=/usr/local/share/java/classes/hamcrest.jar 8106 fi 8107 else 8108 HAMCREST_CORE_JAR=$with_hamcrest_core 8109 fi 8110 if test -e "$HAMCREST_CORE_JAR"; then 8111 AC_MSG_RESULT([yes]) 8112 if test "$_os" = "WINNT"; then 8113 HAMCREST_CORE_JAR=`cygpath -m "$HAMCREST_CORE_JAR"` 8114 fi 8115 else 8116 if test "$JUNIT_NEEDS_HAMCREST" = "yes"; then 8117 AC_MSG_ERROR([cannot find hamcrest-core jar; please install one in the 8118default locations (/usr/share/java or /usr/local/share/java/classes), specify its 8119pathname via --with-hamcrest-core=..., or disable 8120it via --without-hamcrest-core or --without-junit]) 8121 else 8122 AC_MSG_RESULT([no, skipping]) 8123 fi 8124 fi 8125else 8126 if test "$JUNIT_NEEDS_HAMCREST" = "yes"; then 8127 AC_MSG_ERROR([JUnit needs Hamcrest but Hamcrest disabled.]) 8128 fi 8129fi 8130AC_SUBST(HAMCREST_CORE_JAR) 8131 8132AC_MSG_CHECKING([which languages to be built]) 8133WITH_LANG="$with_lang" 8134if test -z "$WITH_LANG"; then 8135 AC_MSG_RESULT([en-US]) 8136else 8137 AC_MSG_RESULT([$WITH_LANG]) 8138 ADDITIONAL_REPOSITORIES="$ADDITIONAL_REPOSITORIES ../extras" 8139 BUILD_TYPE="$BUILD_TYPE L10N" 8140fi 8141AC_SUBST(WITH_LANG) 8142 8143AC_MSG_CHECKING([which languages have poor help localizations]) 8144WITH_POOR_HELP_LOCALIZATIONS="$with_poor_help_localizations" 8145if test -z "$WITH_POOR_HELP_LOCALIZATIONS"; then 8146 AC_MSG_RESULT([none]) 8147else 8148 AC_MSG_RESULT([$WITH_POOR_HELP_LOCALIZATIONS]) 8149fi 8150AC_SUBST(WITH_POOR_HELP_LOCALIZATIONS) 8151 8152AC_MSG_CHECKING([which dictionaries to include]) 8153if test -z "$with_dict"; then 8154 WITH_DICT=,ALL, 8155 AC_MSG_RESULT([ALL]) 8156else 8157 WITH_DICT=","$with_dict"," 8158 AC_MSG_RESULT([$with_dict]) 8159fi 8160AC_SUBST(WITH_DICT) 8161 8162AC_MSG_CHECKING([for additional 'intro' bitmaps]) 8163INTRO_BITMAPS= 8164if test -z "$with_intro_bitmaps" -o "$with_intro_bitmaps" = "no" ; then 8165 INTRO_BITMAPS= 8166 AC_MSG_RESULT([none]) 8167else 8168 for bitmap in `echo $with_intro_bitmaps | tr ',' ' '` ; do 8169 case "$bitmap" in 8170 *.png) ;; 8171 *) bitmap= ; AC_MSG_WARN([Intro bitmaps should be .png files!]) ;; 8172 esac 8173 if test -n "$bitmap" ; then 8174 INTRO_BITMAPS="$INTRO_BITMAPS $bitmap" 8175 fi 8176 done 8177 AC_MSG_RESULT([$INTRO_BITMAPS]) 8178fi 8179AC_SUBST(INTRO_BITMAPS) 8180 8181AC_MSG_CHECKING([for additional 'about' bitmaps]) 8182ABOUT_BITMAPS= 8183if test -z "$with_about_bitmaps" -o "$with_about_bitmaps" = "no" ; then 8184 ABOUT_BITMAPS= 8185 AC_MSG_RESULT([none]) 8186else 8187 for bitmap in `echo $with_about_bitmaps | tr ',' ' '` ; do 8188 case "$bitmap" in 8189 *.png) ;; 8190 *) bitmap= ; AC_MSG_WARN([About bitmaps should be .png files!]) ;; 8191 esac 8192 if test -n "$bitmap" ; then 8193 ABOUT_BITMAPS="$ABOUT_BITMAPS $bitmap" 8194 fi 8195 done 8196 AC_MSG_RESULT([$ABOUT_BITMAPS]) 8197fi 8198AC_SUBST(ABOUT_BITMAPS) 8199 8200OOO_VENDOR= 8201AC_MSG_CHECKING([for vendor]) 8202if test -z "$with_vendor" -o "$with_vendor" = "no" ; then 8203 AC_MSG_RESULT([not set]) 8204else 8205 OOO_VENDOR="$with_vendor" 8206 AC_MSG_RESULT([$OOO_VENDOR]) 8207fi 8208AC_SUBST(OOO_VENDOR) 8209 8210UNIXWRAPPERNAME= 8211AC_MSG_CHECKING([for UNIX wrapper name]) 8212if test -z "$with_unix_wrapper" -o "$with_unix_wrapper" = "no" -o "$with_unix_wrapper" = "yes" ; then 8213 AC_MSG_RESULT([not set]) 8214else 8215 UNIXWRAPPERNAME="$with_unix_wrapper" 8216 AC_MSG_RESULT([$UNIXWRAPPERNAME]) 8217fi 8218AC_SUBST(UNIXWRAPPERNAME) 8219 8220AC_MSG_CHECKING([whether to statically link to Gtk]) 8221if test -n "$enable_static_gtk" && test "$enable_static_gtk" != "no"; then 8222 ENABLE_STATIC_GTK="TRUE" 8223 AC_MSG_RESULT([yes]) 8224else 8225 ENABLE_STATIC_GTK="FALSE" 8226 AC_MSG_RESULT([no]) 8227fi 8228AC_SUBST(ENABLE_STATIC_GTK) 8229 8230AC_MSG_CHECKING([whether to use layout dialogs]) 8231if test -n "$enable_layout" && test "$enable_layout" != "no"; then 8232 ENABLE_LAYOUT="TRUE" 8233 AC_MSG_RESULT([yes]) 8234else 8235 ENABLE_LAYOUT="FALSE" 8236 AC_MSG_RESULT([no]) 8237fi 8238AC_SUBST(ENABLE_LAYOUT) 8239 8240# =================================================================== 8241# De- or increase default verbosity of build process 8242# =================================================================== 8243AC_MSG_CHECKING([build verbosity]) 8244if test -n "$enable_verbose"; then 8245 if test "$enable_verbose" = "yes"; then 8246 VERBOSE="TRUE" 8247 AC_MSG_RESULT([high]) 8248 fi 8249 if test "$enable_verbose" = "no"; then 8250 VERBOSE="FALSE" 8251 AC_MSG_RESULT([low]) 8252 fi 8253else 8254 AC_MSG_RESULT([not set]) 8255fi 8256AC_SUBST(VERBOSE) 8257 8258dnl =================================================================== 8259dnl Hook up AOOs nodep environmental variable to automake's equivalent 8260dnl --enable-dependency-tracking configure option 8261dnl =================================================================== 8262AC_MSG_CHECKING([whether to enable dependency tracking]) 8263if test "$enable_dependency_tracking" = "no"; then 8264 nodep=TRUE 8265 AC_MSG_RESULT([no]) 8266else 8267 AC_MSG_RESULT([yes]) 8268fi 8269AC_SUBST(nodep) 8270 8271dnl =================================================================== 8272dnl Setting up the environment. 8273dnl =================================================================== 8274echo "********************************************************************" 8275echo "* *" 8276echo "* Setting up the build environment variables. *" 8277echo "* *" 8278echo "********************************************************************" 8279 8280if test -z "$COMPATH"; then 8281 AC_MSG_ERROR([No compiler found.]) 8282fi 8283AC_SUBST(COMPATH) 8284AC_SUBST(CC_PATH) 8285 8286AC_MSG_CHECKING([solver path]) 8287if test -z "$with_local_solver"; then 8288 LOCAL_SOLVER="DEFAULT" 8289 AC_MSG_RESULT([default]) 8290else 8291 LOCAL_SOLVER=$with_local_solver 8292 AC_MSG_RESULT([$with_local_solver]) 8293fi 8294AC_SUBST(LOCAL_SOLVER) 8295 8296AC_SUBST(BUILD_TYPE) 8297AC_SUBST(ADDITIONAL_REPOSITORIES) 8298 8299# make sure config.guess is +x; we execute config.guess, so it has to be so; 8300chmod +x ./config.guess 8301 8302# Create files from their *.in templates. 8303AC_CONFIG_FILES([set_soenv Makefile]) 8304 8305AC_MSG_NOTICE([writing config.status]) 8306AC_OUTPUT 8307 8308dnl Executing the set_soenv script to setup the environment variables. 8309chmod a+x set_soenv 8310if test -z "$enable_check_only"; then 8311 './set_soenv' 8312else 8313 echo 8314 echo Test Complete 8315 echo No environment file will be generated 8316 echo 8317 num_warnings=`wc -l warn` 8318 _num=`echo $num_warnings | $AWK '{ print $1 }'` 8319 if test $_num -gt 0; then 8320 echo The following warning\(s\) were generated by configure 8321 echo ---------------------------------------------------- 8322 echo 8323 cat warn 8324 echo 8325 else 8326 echo There were no warnings 8327 fi 8328 echo 8329fi 8330 8331
