1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_unotools.hxx"
26 #ifndef GCC
27 #endif
28 
29 //_________________________________________________________________________________________________________________
30 //	includes
31 //_________________________________________________________________________________________________________________
32 
33 #include <deque>
34 
35 #include <unotools/internaloptions.hxx>
36 #include <unotools/configmgr.hxx>
37 #include <unotools/configitem.hxx>
38 #include <tools/debug.hxx>
39 #include <com/sun/star/uno/Any.hxx>
40 #include <com/sun/star/uno/Sequence.hxx>
41 #include <com/sun/star/beans/PropertyValue.hpp>
42 
43 #include <rtl/logfile.hxx>
44 #include "itemholder1.hxx"
45 
46 //_________________________________________________________________________________________________________________
47 //	namespaces
48 //_________________________________________________________________________________________________________________
49 
50 using namespace ::utl					;
51 using namespace ::rtl					;
52 using namespace ::osl					;
53 using namespace ::std					;
54 using namespace ::com::sun::star::uno	;
55 using namespace ::com::sun::star::beans	;
56 
57 //_________________________________________________________________________________________________________________
58 //	const
59 //_________________________________________________________________________________________________________________
60 
61 #define	ROOTNODE_INTERNAL					OUString(RTL_CONSTASCII_USTRINGPARAM("Office.Common/Internal"	))
62 #define	DEFAULT_SLOTCFG						sal_False
63 #define	DEFAULT_SENDCRASHMAIL				sal_False
64 #define DEFAULT_USEMAILUI                   sal_True
65 #define DEFAULT_CURRENTTEMPURL				OUString(RTL_CONSTASCII_USTRINGPARAM(""))
66 
67 #define	FIXPROPERTYNAME_SLOTCFG				OUString(RTL_CONSTASCII_USTRINGPARAM("Slot"						))
68 #define	FIXPROPERTYNAME_SENDCRASHMAIL		OUString(RTL_CONSTASCII_USTRINGPARAM("SendCrashMail"			))
69 #define FIXPROPERTYNAME_USEMAILUI           OUString(RTL_CONSTASCII_USTRINGPARAM("UseMailUI"                ))
70 #define FIXPROPERTYNAME_CURRENTTEMPURL		OUString(RTL_CONSTASCII_USTRINGPARAM("CurrentTempURL"			))
71 //#define FIXPROPERTYNAME_REMOVEMENUENTRYCLOSE           OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryClose"))
72 //#define FIXPROPERTYNAME_REMOVEMENUENTRYBACKTOWEBTOP    OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryBackToWebtop"))
73 //#define FIXPROPERTYNAME_REMOVEMENUENTRYNEWWEBTOP       OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryNewWebtop"))
74 //#define FIXPROPERTYNAME_REMOVEMENUENTRYLOGOUT          OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryLogout"))
75 
76 #define	FIXPROPERTYHANDLE_SLOTCFG			0
77 #define	FIXPROPERTYHANDLE_SENDCRASHMAIL		1
78 #define FIXPROPERTYHANDLE_USEMAILUI         2
79 #define FIXPROPERTYHANDLE_CURRENTTEMPURL	3
80 //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE   3
81 //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP         4
82 //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP         5
83 //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT         6
84 
85 #define FIXPROPERTYCOUNT                    4
86 /*
87 #define	PROPERTYNAME_RECOVERYLIST			OUString(RTL_CONSTASCII_USTRINGPARAM("RecoveryList"				))
88 #define	PROPERTYNAME_URL					OUString(RTL_CONSTASCII_USTRINGPARAM("OrgURL"					))
89 #define	PROPERTYNAME_FILTER					OUString(RTL_CONSTASCII_USTRINGPARAM("FilterName"  			    ))
90 #define	PROPERTYNAME_TEMPNAME				OUString(RTL_CONSTASCII_USTRINGPARAM("TempURL"					))
91 
92 #define	OFFSET_URL							0
93 #define	OFFSET_FILTER						1
94 #define	OFFSET_TEMPNAME						2
95 */
96 #define	PATHDELIMITER						OUString(RTL_CONSTASCII_USTRINGPARAM("/"						))
97 #define	FIXR								OUString(RTL_CONSTASCII_USTRINGPARAM("r"						))
98 
99 //_________________________________________________________________________________________________________________
100 //	private declarations!
101 //_________________________________________________________________________________________________________________
102 /*
103 struct tIMPL_RecoveryEntry
104 {
105 	OUString	sURL		;
106 	OUString	sFilter		;
107 	OUString	sTempName	;
108 
109 	tIMPL_RecoveryEntry()
110 	{
111 		sURL		=	OUString();
112 		sFilter		=	OUString();
113 		sTempName	=	OUString();
114 	}
115 
116 	tIMPL_RecoveryEntry(	const	OUString&	sNewURL			,
117 							const	OUString&	sNewFilter		,
118 							const	OUString&	sNewTempName	)
119 	{
120 		sURL		=	sNewURL			;
121 		sFilter		=	sNewFilter		;
122 		sTempName	=	sNewTempName	;
123 	}
124 };
125 
126 typedef deque< tIMPL_RecoveryEntry > tIMPL_RecoveryStack;
127 */
128 class SvtInternalOptions_Impl : public ConfigItem
129 {
130 	//-------------------------------------------------------------------------------------------------------------
131 	//	private member
132 	//-------------------------------------------------------------------------------------------------------------
133 
134 	private:
135 
136         sal_Bool                m_bRemoveMenuEntryClose;
137         sal_Bool                m_bRemoveMenuEntryBackToWebtop;
138         sal_Bool                m_bRemoveMenuEntryNewWebtop;
139         sal_Bool                m_bRemoveMenuEntryLogout;
140         sal_Bool                m_bSlotCFG          ;   /// cache "Slot" of Internal section
141 		sal_Bool				m_bSendCrashMail	;	/// cache "SendCrashMail" of Internal section
142         sal_Bool                m_bUseMailUI;
143 		OUString				m_aCurrentTempURL	;
144 	//	tIMPL_RecoveryStack		m_aRecoveryList		;	/// cache "RecoveryList" of Internal section
145 	//-------------------------------------------------------------------------------------------------------------
146 	//	public methods
147 	//-------------------------------------------------------------------------------------------------------------
148 
149 	public:
150 
151 		//---------------------------------------------------------------------------------------------------------
152 		//	constructor / destructor
153 		//---------------------------------------------------------------------------------------------------------
154 
155 		 SvtInternalOptions_Impl();
156 		~SvtInternalOptions_Impl();
157 
158 		//---------------------------------------------------------------------------------------------------------
159 		//	overloaded methods of baseclass
160 		//---------------------------------------------------------------------------------------------------------
161 
162 		/*-****************************************************************************************************//**
163 			@short		called for notify of configmanager
164 			@descr		These method is called from the ConfigManager before application ends or from the
165 			 			PropertyChangeListener if the sub tree broadcasts changes. You must update your
166 						internal values.
167 
168 			@seealso	baseclass ConfigItem
169 
170 			@param		"seqPropertyNames" is the list of properties which should be updated.
171 			@return		-
172 
173 			@onerror	-
174 		*//*-*****************************************************************************************************/
175 
Notify(const Sequence<OUString> &)176     	virtual void Notify( const Sequence< OUString >& )
177 		{
178 			DBG_ASSERT( sal_False, "SvtInternalOptions::Notify()\nNot used yet ... but called!?\n" );
179 		}
180 
181 		/*-****************************************************************************************************//**
182 			@short		write changes to configuration
183 			@descr		These method writes the changed values into the sub tree
184 						and should always called in our destructor to guarantee consistency of config data.
185 
186 			@seealso	baseclass ConfigItem
187 
188 			@param		-
189 			@return		-
190 
191 			@onerror	-
192 		*//*-*****************************************************************************************************/
193 
194     	virtual void Commit();
195 
196 		//---------------------------------------------------------------------------------------------------------
197 		//	public interface
198 		//---------------------------------------------------------------------------------------------------------
199 
200 		/*-****************************************************************************************************//**
201 			@short		access method to get internal values
202 			@descr		This method gives us a chance to regulate access to our internal values.
203 						It's not used in the moment - but it's possible for the future!
204 
205 			@seealso	-
206 
207 			@param		-
208 			@return		-
209 
210 			@onerror	-
211 		*//*-*****************************************************************************************************/
212 
IsRemoveMenuEntryClose() const213         sal_Bool    IsRemoveMenuEntryClose() const { return m_bRemoveMenuEntryClose; }
IsRemoveMenuEntryBackToWebtop() const214         sal_Bool    IsRemoveMenuEntryBackToWebtop() const { return m_bRemoveMenuEntryBackToWebtop; }
IsRemoveMenuEntryNewWebtop() const215         sal_Bool    IsRemoveMenuEntryNewWebtop() const { return m_bRemoveMenuEntryNewWebtop; }
IsRemoveMenuEntryLogout() const216         sal_Bool    IsRemoveMenuEntryLogout() const { return m_bRemoveMenuEntryLogout; }
SlotCFGEnabled() const217         sal_Bool    SlotCFGEnabled      () const { return m_bSlotCFG; }
CrashMailEnabled() const218         sal_Bool    CrashMailEnabled    () const { return m_bSendCrashMail; }
MailUIEnabled() const219         sal_Bool    MailUIEnabled       () const { return m_bUseMailUI; }
220 
GetCurrentTempURL() const221 		OUString	GetCurrentTempURL() const { return m_aCurrentTempURL; }
222 		void		SetCurrentTempURL( const OUString& aNewCurrentTempURL );
223 /*
224 		void		PushRecoveryItem	(	const	OUString&	sURL		,
225 											const	OUString&	sFilter		,
226 					 						const	OUString&	sTempName	);
227 		void		PopRecoveryItem		(			OUString&	sURL		,
228 													OUString&	sFilter		,
229 													OUString&	sTempName	);
230 		sal_Bool	IsRecoveryListEmpty	(									) const;
231 */
232 	//-------------------------------------------------------------------------------------------------------------
233 	//	private methods
234 	//-------------------------------------------------------------------------------------------------------------
235 
236 	private:
237 
238 		/*-****************************************************************************************************//**
239 			@short		return list of fix key names of our configuration management which represent our module tree
240 			@descr		These methods return a static const list of key names. We need it to get needed values from our
241 						configuration management. We return well known key names only - because the "UserData" node
242 						is handled in a special way!
243 
244 			@seealso	-
245 
246 			@param		-
247 			@return		A list of needed configuration keys is returned.
248 
249 			@onerror	-
250 		*//*-*****************************************************************************************************/
251 
252 		Sequence< OUString > impl_GetPropertyNames();
253 };
254 
255 //_________________________________________________________________________________________________________________
256 //	definitions
257 //_________________________________________________________________________________________________________________
258 
259 //*****************************************************************************************************************
260 //	constructor
261 //*****************************************************************************************************************
SvtInternalOptions_Impl()262 SvtInternalOptions_Impl::SvtInternalOptions_Impl()
263 	// Init baseclasses first
264     :   ConfigItem          ( ROOTNODE_INTERNAL, CONFIG_MODE_IMMEDIATE_UPDATE )
265 	// Init member then.
266     , m_bRemoveMenuEntryClose ( sal_False )
267     , m_bRemoveMenuEntryBackToWebtop ( sal_False )
268     , m_bRemoveMenuEntryNewWebtop ( sal_False )
269     , m_bRemoveMenuEntryLogout ( sal_False )
270 	,	m_bSlotCFG			( DEFAULT_SLOTCFG			)
271 	,	m_bSendCrashMail	( DEFAULT_SENDCRASHMAIL		)
272     ,   m_bUseMailUI        ( DEFAULT_USEMAILUI			)
273 	,	m_aCurrentTempURL	( DEFAULT_CURRENTTEMPURL	)
274 {
275 	// Use our list of configuration keys to get his values.
276 	// structure of internal section: (first 2 entries are fixed - all other are member of a set!)
277 	//		"Slot"
278 	//		"SendCrashMail"
279 	//		"RecoveryList/r1/URL"
280 	//		"RecoveryList/r1/Filter"
281 	//		"RecoveryList/r1/TempName"
282 	//		"RecoveryList/r2/URL"
283 	//		"RecoveryList/r2/Filter"
284 	//		"RecoveryList/r2/TempName"
285 	//		"RecoveryList/.."
286 	Sequence< OUString >	seqNames	= impl_GetPropertyNames()	;
287 	Sequence< Any >			seqValues	= GetProperties( seqNames )	;
288 
289 	// Safe impossible cases.
290 	// We need values from ALL configuration keys.
291 	// Follow assignment use order of values in relation to our list of key names!
292 	DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nI miss some values of configuration keys!\n" );
293 
294 	// Read fixed values first!
295 	DBG_ASSERT(!(seqValues[FIXPROPERTYHANDLE_SLOTCFG].getValueTypeClass()!=TypeClass_BOOLEAN)		, "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\Slot\"?"			);
296 	DBG_ASSERT(!(seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL].getValueTypeClass()!=TypeClass_BOOLEAN)	, "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\SendCrashMail\"?"	);
297 	seqValues[FIXPROPERTYHANDLE_SLOTCFG			] >>= m_bSlotCFG		;
298 	seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL	] >>= m_bSendCrashMail	;
299     seqValues[FIXPROPERTYHANDLE_USEMAILUI       ] >>= m_bUseMailUI  ;
300 	seqValues[FIXPROPERTYHANDLE_CURRENTTEMPURL	] >>= m_aCurrentTempURL	;
301 //    seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE ] >>= m_bRemoveMenuEntryClose  ;
302 //    seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP ] >>= m_bRemoveMenuEntryBackToWebtop  ;
303 //    seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP ] >>= m_bRemoveMenuEntryNewWebtop  ;
304 //    seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT ] >>= m_bRemoveMenuEntryLogout  ;
305 /*
306 	// Read dynamical set "RecoveryList" then.
307 	// 3 subkeys for every item!
308 	// Attention: Start at next element after last fixed entry! We must ignore "Slot" and "SendCrashMail" ...
309 	tIMPL_RecoveryEntry aEntry;
310 	sal_uInt32 nCount		= seqValues.getLength()	;
311 	sal_uInt32 nPosition	= FIXPROPERTYCOUNT		;
312 
313 	while( nPosition<nCount )
314 	{
315 		seqValues[nPosition] >>= aEntry.sURL		;
316 		++nPosition;
317 		seqValues[nPosition] >>= aEntry.sFilter		;
318 		++nPosition;
319 		seqValues[nPosition] >>= aEntry.sTempName	;
320 		++nPosition;
321 		m_aRecoveryList.push_front( aEntry );
322 	}
323 */
324 	// We don't need any notifications here.
325 	// "Slot" and "SendCrashMail" are readonly(!) and our recovery list should not modified during runtime - it's used
326 	// by our crash guard only ... otherwise we have a big problem.
327 }
328 
329 //*****************************************************************************************************************
330 //	destructor
331 //*****************************************************************************************************************
~SvtInternalOptions_Impl()332 SvtInternalOptions_Impl::~SvtInternalOptions_Impl()
333 {
334 	if( IsModified() == sal_True )
335 	{
336 		Commit();
337 	}
338 }
339 
340 //*****************************************************************************************************************
341 //	public method
342 //*****************************************************************************************************************
Commit()343 void SvtInternalOptions_Impl::Commit()
344 {
345 	// We have to write our current temp URL
346 	Sequence< OUString > aNames( 1 );
347 	OUString* pNames = aNames.getArray();
348 	Sequence< Any > aValues( 1 );
349 	Any* pValues = aValues.getArray();
350 
351 	pNames[0] = FIXPROPERTYNAME_CURRENTTEMPURL;
352 	pValues[0] <<= m_aCurrentTempURL;
353 
354 	PutProperties( aNames, aValues );
355 
356 /*
357 	// Write set of dynamic properties then.
358 	ClearNodeSet( PROPERTYNAME_RECOVERYLIST );
359 
360 	tIMPL_RecoveryEntry			aItem					;
361 	OUString					sNode					;
362 	Sequence< PropertyValue >	seqPropertyValues( 3 )	;	// Every node in set has 3 sub-nodes!( url, filter, tempname )
363 
364 	// Copy list entries to save-list and write it to configuration.
365 
366 	sal_uInt32 nCount = m_aRecoveryList.size();
367 	for( sal_uInt32 nItem=0; nItem<nCount; ++nItem )
368 	{
369 		aItem = m_aRecoveryList.top();
370 		m_aRecoveryList.pop();
371 		sNode = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + FIXR + OUString::valueOf( (sal_Int32)nItem ) + PATHDELIMITER;
372 		seqPropertyValues[OFFSET_URL		].Name  =	sNode + PROPERTYNAME_URL		;
373 		seqPropertyValues[OFFSET_FILTER		].Name  =	sNode + PROPERTYNAME_FILTER		;
374 		seqPropertyValues[OFFSET_TEMPNAME	].Name  =	sNode + PROPERTYNAME_TEMPNAME	;
375 		seqPropertyValues[OFFSET_URL		].Value <<=	aItem.sURL						;
376 		seqPropertyValues[OFFSET_FILTER		].Value <<=	aItem.sFilter					;
377 		seqPropertyValues[OFFSET_TEMPNAME	].Value <<=	aItem.sTempName					;
378 
379 		SetSetProperties( PROPERTYNAME_RECOVERYLIST, seqPropertyValues );
380 	}
381 
382 	tIMPL_RecoveryStack::iterator iRecovery = m_aRecoveryList.begin();
383 	for ( sal_uInt32 nItem=0; iRecovery != m_aRecoveryList.end(); ++nItem, ++iRecovery)
384 	{
385 		aItem = *iRecovery;
386 		sNode = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + FIXR +
387 			OUString::valueOf( (sal_Int32)nItem ) + PATHDELIMITER;
388 		seqPropertyValues[OFFSET_URL		].Name  =	sNode + PROPERTYNAME_URL		;
389 		seqPropertyValues[OFFSET_FILTER		].Name  =	sNode + PROPERTYNAME_FILTER		;
390 		seqPropertyValues[OFFSET_TEMPNAME	].Name  =	sNode + PROPERTYNAME_TEMPNAME	;
391 		seqPropertyValues[OFFSET_URL		].Value <<=	iRecovery->sURL					;
392 		seqPropertyValues[OFFSET_FILTER		].Value <<=	iRecovery->sFilter				;
393 		seqPropertyValues[OFFSET_TEMPNAME	].Value <<=	iRecovery->sTempName			;
394 		SetSetProperties( PROPERTYNAME_RECOVERYLIST, seqPropertyValues );
395 	}
396 
397     */
398 }
399 
400 //*****************************************************************************************************************
401 //	public method
402 //*****************************************************************************************************************
SetCurrentTempURL(const OUString & aNewCurrentTempURL)403 void SvtInternalOptions_Impl::SetCurrentTempURL( const OUString& aNewCurrentTempURL )
404 {
405 	m_aCurrentTempURL = aNewCurrentTempURL;
406 	SetModified();
407     Commit();
408 }
409 
410 #if 0
411 //*****************************************************************************************************************
412 //	public method
413 //*****************************************************************************************************************
414 void SvtInternalOptions_Impl::PushRecoveryItem(	const	OUString&	sURL		,
415 												const	OUString&	sFilter		,
416 												const	OUString&	sTempName	)
417 {
418 	tIMPL_RecoveryEntry aEntry( sURL, sFilter, sTempName );
419 	m_aRecoveryList.push_front( aEntry );
420 	SetModified();
421 }
422 
423 //*****************************************************************************************************************
424 //	public method
425 //*****************************************************************************************************************
426 void SvtInternalOptions_Impl::PopRecoveryItem(	OUString&	sURL		,
427 												OUString&	sFilter		,
428 												OUString&	sTempName	)
429 {
430 	tIMPL_RecoveryEntry aEntry = m_aRecoveryList.front();
431 	m_aRecoveryList.pop_front();
432 	SetModified();	// Don't forget it - we delete an entry here!
433 	sURL		= aEntry.sURL		;
434 	sFilter		= aEntry.sFilter	;
435 	sTempName	= aEntry.sTempName	;
436 }
437 
438 //*****************************************************************************************************************
439 //	public method
440 //*****************************************************************************************************************
441 sal_Bool SvtInternalOptions_Impl::IsRecoveryListEmpty() const
442 {
443 	return ( m_aRecoveryList.empty() );
444 }
445 #endif
446 
447 //*****************************************************************************************************************
448 //	private method
449 //*****************************************************************************************************************
impl_GetPropertyNames()450 Sequence< OUString > SvtInternalOptions_Impl::impl_GetPropertyNames()
451 {
452     /*
453 	// First get ALL names of current existing list items in configuration!
454 	Sequence< OUString > seqRecoveryItems = GetNodeNames( PROPERTYNAME_RECOVERYLIST );
455 	// Get information about list counts ...
456 	sal_Int32 nRecoveryCount = seqRecoveryItems.getLength();
457 	// ... and create a property list with right size! (+2...for fix properties!) (*3 ... = sub nodes for every set node!)
458 	Sequence< OUString > seqProperties( FIXPROPERTYCOUNT + (nRecoveryCount*3) );
459     */
460 	Sequence< OUString > seqProperties(4);
461 
462 	// Add names of fix properties to list.
463     seqProperties[FIXPROPERTYHANDLE_SLOTCFG         ]   =   FIXPROPERTYNAME_SLOTCFG         ;
464 	seqProperties[FIXPROPERTYHANDLE_SENDCRASHMAIL	]	=	FIXPROPERTYNAME_SENDCRASHMAIL	;
465     seqProperties[FIXPROPERTYHANDLE_USEMAILUI       ]   =   FIXPROPERTYNAME_USEMAILUI       ;
466 	seqProperties[FIXPROPERTYHANDLE_CURRENTTEMPURL	]	=	FIXPROPERTYNAME_CURRENTTEMPURL	;
467 //    seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE        ]   =   FIXPROPERTYNAME_REMOVEMENUENTRYCLOSE;
468 //    seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP ]   =   FIXPROPERTYNAME_REMOVEMENUENTRYBACKTOWEBTOP;
469 //    seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP    ]   =   FIXPROPERTYNAME_REMOVEMENUENTRYNEWWEBTOP;
470 //    seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT       ]   =   FIXPROPERTYNAME_REMOVEMENUENTRYLOGOUT;
471 /*
472 	sal_uInt32 nPosition = FIXPROPERTYCOUNT;
473 	// Add names for recovery list to list.
474 	// 3 subkeys for every item!
475 	// nPosition is the start point of an list item, nItem an index into right list of node names!
476 	for( sal_Int32 nItem=0; nItem<nRecoveryCount; ++nItem )
477 	{
478 		seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_URL		;
479 		++nPosition;
480 		seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_FILTER	;
481 		++nPosition;
482 		seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_TEMPNAME	;
483 		++nPosition;
484 	}
485 */
486 	// Return result.
487 	return seqProperties;
488 }
489 
490 //*****************************************************************************************************************
491 //	initialize static member
492 //	DON'T DO IT IN YOUR HEADER!
493 //	see definition for further informations
494 //*****************************************************************************************************************
495 SvtInternalOptions_Impl*	SvtInternalOptions::m_pDataContainer	= NULL	;
496 sal_Int32					SvtInternalOptions::m_nRefCount			= 0		;
497 
498 //*****************************************************************************************************************
499 //	constructor
500 //*****************************************************************************************************************
SvtInternalOptions()501 SvtInternalOptions::SvtInternalOptions()
502 {
503     // Global access, must be guarded (multithreading!).
504     MutexGuard aGuard( GetOwnStaticMutex() );
505 	// Increase our refcount ...
506 	++m_nRefCount;
507 	// ... and initialize our data container only if it is not already!
508     if( m_pDataContainer == NULL )
509 	{
510         RTL_LOGFILE_CONTEXT(aLog, "unotools ( ??? ) ::SvtInternalOptions_Impl::ctor()");
511         m_pDataContainer = new SvtInternalOptions_Impl();
512 
513         ItemHolder1::holdConfigItem(E_INTERNALOPTIONS);
514  	}
515 }
516 
517 //*****************************************************************************************************************
518 //	destructor
519 //*****************************************************************************************************************
~SvtInternalOptions()520 SvtInternalOptions::~SvtInternalOptions()
521 {
522     // Global access, must be guarded (multithreading!)
523     MutexGuard aGuard( GetOwnStaticMutex() );
524 	// Decrease our refcount.
525 	--m_nRefCount;
526 	// If last instance was deleted ...
527 	// we must destroy our static data container!
528     if( m_nRefCount <= 0 )
529 	{
530 		delete m_pDataContainer;
531 		m_pDataContainer = NULL;
532 	}
533 }
534 
535 //*****************************************************************************************************************
536 //	public method
537 //*****************************************************************************************************************
SlotCFGEnabled() const538 sal_Bool SvtInternalOptions::SlotCFGEnabled() const
539 {
540     MutexGuard aGuard( GetOwnStaticMutex() );
541 	return m_pDataContainer->SlotCFGEnabled();
542 }
543 
544 //*****************************************************************************************************************
545 //	public method
546 //*****************************************************************************************************************
CrashMailEnabled() const547 sal_Bool SvtInternalOptions::CrashMailEnabled() const
548 {
549     MutexGuard aGuard( GetOwnStaticMutex() );
550 	return m_pDataContainer->CrashMailEnabled();
551 }
552 
553 //*****************************************************************************************************************
554 //	public method
555 //*****************************************************************************************************************
MailUIEnabled() const556 sal_Bool SvtInternalOptions::MailUIEnabled() const
557 {
558     MutexGuard aGuard( GetOwnStaticMutex() );
559     return m_pDataContainer->MailUIEnabled();
560 }
561 
562 //*****************************************************************************************************************
563 //  public methods
564 //*****************************************************************************************************************
IsRemoveMenuEntryClose() const565 sal_Bool SvtInternalOptions::IsRemoveMenuEntryClose() const
566 {
567     MutexGuard aGuard( GetOwnStaticMutex() );
568     return m_pDataContainer->IsRemoveMenuEntryClose();
569 }
570 
IsRemoveMenuEntryBackToWebtop() const571 sal_Bool SvtInternalOptions::IsRemoveMenuEntryBackToWebtop() const
572 {
573     MutexGuard aGuard( GetOwnStaticMutex() );
574     return m_pDataContainer->IsRemoveMenuEntryBackToWebtop();
575 }
576 
IsRemoveMenuEntryNewWebtop() const577 sal_Bool SvtInternalOptions::IsRemoveMenuEntryNewWebtop() const
578 {
579     MutexGuard aGuard( GetOwnStaticMutex() );
580     return m_pDataContainer->IsRemoveMenuEntryNewWebtop();
581 }
582 
IsRemoveMenuEntryLogout() const583 sal_Bool SvtInternalOptions::IsRemoveMenuEntryLogout() const
584 {
585     MutexGuard aGuard( GetOwnStaticMutex() );
586     return m_pDataContainer->IsRemoveMenuEntryLogout();
587 }
588 
GetCurrentTempURL() const589 OUString SvtInternalOptions::GetCurrentTempURL() const
590 {
591     MutexGuard aGuard( GetOwnStaticMutex() );
592     return m_pDataContainer->GetCurrentTempURL();
593 }
594 
SetCurrentTempURL(const OUString & aNewCurrentTempURL)595 void SvtInternalOptions::SetCurrentTempURL( const OUString& aNewCurrentTempURL )
596 {
597     MutexGuard aGuard( GetOwnStaticMutex() );
598 	m_pDataContainer->SetCurrentTempURL( aNewCurrentTempURL );
599 }
600 
601 //*****************************************************************************************************************
602 //	private method
603 //*****************************************************************************************************************
GetOwnStaticMutex()604 Mutex& SvtInternalOptions::GetOwnStaticMutex()
605 {
606 	// Initialize static mutex only for one time!
607     static Mutex* pMutex = NULL;
608 	// If these method first called (Mutex not already exist!) ...
609     if( pMutex == NULL )
610     {
611 		// ... we must create a new one. Protect follow code with the global mutex -
612 		// It must be - we create a static variable!
613         MutexGuard aGuard( Mutex::getGlobalMutex() );
614 		// We must check our pointer again - because it can be that another instance of our class will be faster than these!
615         if( pMutex == NULL )
616         {
617 			// Create the new mutex and set it for return on static variable.
618             static Mutex aMutex;
619             pMutex = &aMutex;
620         }
621     }
622 	// Return new created or already existing mutex object.
623     return *pMutex;
624 }
625